What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 66 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 66 of 185

4730-14-362-1365

4730-14-309-2996

4730-14-495-0528
Tube To Boss Straight Adapter

144950528
96002421: RNCC: 3 | RNVC: 2
F300 0T 018 2703: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-211-4430
Fluid Pressure Line Multiple Connector

142114430
44424: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-396-4004
Tube Tee

143964004
TL12NU: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-482-5145
Flange To Boss Straight Adapter

144825145
PM1A522139011: RNCC: 3 | RNVC: 2
PM1A522139011: RNCC: 5 | RNVC: 2

11 Jul 1996

4730-14-555-8150
Valve Adapter Assembly

145558150
S701220: RNCC: 3 | RNVC: 2

17 Dec 2007

4730-14-375-7133
Tube To Boss Straight Adapter

143757133
8359101766: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-365-3270
Fluid Passage Bolt

143653270
9777080034: RNCC: 3 | RNVC: 2

19 Sep 1980

4730-14-413-9101
Tube To Boss Straight Adapter

144139101
70485: RNCC: 3 | RNVC: 2
89302015: RNCC: 5 | RNVC: 2

22 Jan 1987

4730-14-230-9760
Pipe Flange

142309760
DLT005861: RNCC: 3 | RNVC: 2
DLT05861: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-425-3168
Tube To Hose Straight Adapter

144253168
1390-905: RNCC: 3 | RNVC: 2
91479320: RNCC: 5 | RNVC: 2

30 Jun 1988

4730-14-515-3846
Tube To Boss Straight Adapter

145153846
6200061: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-516-0531
Fluid Flow Restrictor

145160531
SIFLS1R001200F4AREP11B: RNCC: 3 | RNVC: 2

8 Sep 1999

4730-14-361-0347

4730-14-238-1795

4730-14-561-7892
Tube To Boss Tee

145617892
EVL15LOMDCF: RNCC: 3 | RNVC: 2
EVL15LOMDCF: RNCC: 5 | RNVC: 9

7 Sep 2009

4730-14-272-4266

4730-14-284-4472
Ecrou Raccord Speci

142844472
6110-1150: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-253-8201
Bouchon De Purge

142538201
536-418-080DET64: RNCC: 3 | RNVC: 2
511-418-033DET64: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-400-5812
Rallonge L=32

144005812
5033-1: RNCC: 3 | RNVC: 2
5033: RNCC: 5 | RNVC: 2

8 May 1985

4730-14-458-6821

4730-14-464-5433
Tuyau Collier

4730-14-435-3782
Quick Disconnect Coupling Half

144353782
RBE3-22000DIA1-5HP: RNCC: 3 | RNVC: 2

8 Nov 1989

4730-14-305-9094
Pipe Flange

143059094
GSM162-011F11DE25: RNCC: 3 | RNVC: 2
A0143-001F7DE25: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-255-0449
Bouchon Filete

142550449
Z00374-43: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-545-4159
Hose To Gas Fitting Straight Adapter

145454159
DEMASDKO12SR1/2ZB: RNCC: 3 | RNVC: 2

12 Apr 2005

4730-14-371-6960
Quick Disconnect Coupling Half

143716960
MRA04-7904: RNCC: 3 | RNVC: 2
MR04-7904: RNCC: 5 | RNVC: 2
MR4-7904: RNCC: 5 | RNVC: 2

5 Aug 1981

4730-14-427-0314
Pipe Flange

144270314
MAT162-0022DN32MALE: RNCC: 3 | RNVC: 2
MAT162-0022F3: RNCC: 3 | RNVC: 2

5 Oct 1988

4730-14-563-6046
Hose To Gas Fitting Straight Adapter

145636046
R1A25M106I-0812: RNCC: 3 | RNVC: 2

25 Feb 2010

4730-14-419-0172

4730-14-429-8179

4730-14-424-9700
Mamelon Double Pour

4730-14-428-9878

4730-14-471-3604

4730-14-032-1589
Contre Bride

140321589
CMT30E9030AF5ET6DE30REP3: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-262-9566
Support Superieur T

142629566
DLT005282: RNCC: 3 | RNVC: 2
DLT005282: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-359-8822
Bride

143598822
2-21650: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-565-3143
Tube Elbow

145653143
5005130095: RNCC: 1 | RNVC: 2
208 L 05310: RNCC: 3 | RNVC: 2

9 Aug 2010

4730-14-317-4796
Raccord Sphe Embout

143174796
L4730-01F2-3-1: RNCC: 2 | RNVC: 2
4730AE-EMBOUT10,2: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-353-7234
Tube Coupling Nut Assembly

143537234
E-JET33P: RNCC: 3 | RNVC: 2
EJET33P: RNCC: 5 | RNVC: 2
KE-JET33P: RNCC: 5 | RNVC: 2

16 Jan 1979

4730-14-419-4321
Sediment Strainer Element

144194321
HS153-617: RNCC: 3 | RNVC: 2
SAFHS153-617: RNCC: 5 | RNVC: 9

19 Oct 1987

4730-14-449-9567
Quick Disconnect Coupling Half

144499567
PSP06-1116/LD/CP/VI/W4: RNCC: 3 | RNVC: 2

18 Sep 1991

4730-14-333-5271
Tube To Boss Straight Adapter

143335271
GSM164-040F17: RNCC: 3 | RNVC: 2
GSM164-05DF41: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-355-5707
Tube To Boss Straight Adapter

143555707
1DM30-26X34C0: RNCC: 3 | RNVC: 2
ACA30X26-34N: RNCC: 3 | RNVC: 2

19 Mar 1979

4730-14-372-3906
Tuyau Raccord Droit

143723906
G4412-4-4S: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-509-5401

4730-14-520-7990
Adaptateur Manchon

4730-14-435-1384
Tube-Hose Fitting Compression Sleeve

144351384
01110600: RNCC: 3 | RNVC: 2

23 Oct 1989

4730-14-494-9198
Tube To Boss Swivel Joint

144949198
5448145: RNCC: 3 | RNVC: 2
F300 0T 018 0744: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-432-5131
Union Double

144325131
16041153ART499: RNCC: 3 | RNVC: 2

14 Jun 1989

4730-14-406-4738
Alimentatio Raccord

144064738
FH3E522-17: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-358-0648
Fluid Pressure Line Multiple Connector

143580648
616-18ARSK: RNCC: 3 | RNVC: 2

20 Jul 1979

4730-14-343-5915
Quick Disconnect Wye

143435915
RBE06-8101: RNCC: 3 | RNVC: 2

16 Jun 1977

4730-14-346-0191
Fluid Passage Bolt

143460191
453-60024-000: RNCC: 3 | RNVC: 2
453-60024-000: RNCC: 5 | RNVC: 2

5 Nov 1977

4730-14-387-5194
Bride A Zinc

143875194
GSM147-005F20: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-564-3415
Flexible Tube Coupling Assembly

145643415
332A55-1061-20: RNCC: 3 | RNVC: 2

23 Apr 2010

4730-14-457-6998
Pipe Joint Welding Ring

144576998
BN329514DN100INOX: RNCC: 3 | RNVC: 2
BN329-514DN100INOXEXTRUDE: RNCC: 3 | RNVC: 2

15 Sep 1992

4730-14-530-6168
Quick-Disconnect Nipple

145306168
131497: RNCC: 3 | RNVC: 2
P205134-117: RNCC: 3 | RNVC: 9

26 Jun 2002

4730-14-374-1374
Tube Tee

143741374
P166B080806S: RNCC: 3 | RNVC: 2
723.B.06S.08.08: RNCC: 3 | RNVC: 2
723B08 08 06S: RNCC: 5 | RNVC: 2
74723B080806S: RNCC: 5 | RNVC: 2
74723B080806S: RNCC: 5 | RNVC: 2
DHS613-643-26: RNCC: 5 | RNVC: 2
723 B 08 08 06S: RNCC: 5 | RNVC: 2
723B08-08-06S: RNCC: 5 | RNVC: 2
723B080806S: RNCC: 5 | RNVC: 2

8 Dec 1981

4730-14-361-3652
Tube To Boss Straight Adapter

143613652
52-20-15X21CYL: RNCC: 3 | RNVC: 2

24 Jan 1980

4730-14-236-0910
Raccord

142360910
160-61350-21: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-446-6226

4730-14-509-6250

4730-14-374-3099
Raccor Lot Rechange

143743099
4110-909-91: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-333-0900

4730-14-277-6207

4730-14-531-0523
Lubrication Fitting

145310523
15010005: RNCC: 3 | RNVC: 2

23 Jul 2002

4730-14-390-9192
Lubrication Fitting

143909192
493: RNCC: 3 | RNVC: 9

1 Mar 1984

4730-14-330-9425
Sediment Strainer Body

143309425
300010: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-444-7283
Hydraulic System Accessories Manifold

144447283
3315421201: RNCC: 3 | RNVC: 2

21 Jan 1991

4730-14-335-1351
Pipeline Flexible Spacer

143351351
I131NTE80PN16: RNCC: 2 | RNVC: 2
DILNTE80PN16: RNCC: 3 | RNVC: 2
DILNTE80PN16: RNCC: 5 | RNVC: 9

3 Jun 1976

4730-14-455-9550
Bulkhead Hose Connector

144559550
PM1A758220050: RNCC: 3 | RNVC: 2
PM1A758220050: RNCC: 5 | RNVC: 2

11 Jun 1992

4730-14-503-2993
Tube Coupling

145032993
622393261: RNCC: 3 | RNVC: 2

9 Jan 1998

4730-14-477-8875
Tube Coupling

144778875
T700A2825046101: RNCC: 3 | RNVC: 2

27 Sep 1995

4730-14-480-3795
Tube Tee

144803795
11RA12LDL6-16X150C0NU: RNCC: 3 | RNVC: 2
811133566: RNCC: 5 | RNVC: 2
811L33566: RNCC: 5 | RNVC: 2
88406410: RNCC: 5 | RNVC: 2

7 Mar 1996

4730-14-247-1308
Tube To Boss Straight Adapter

142471308
0000129096: RNCC: 3 | RNVC: 2
0000129096: RNCC: 5 | RNVC: 9
129096: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-206-6491
Fluid Passage Bolt

142066491
0000116318: RNCC: 3 | RNVC: 2
0000116318: RNCC: 5 | RNVC: 9
116318: RNCC: 5 | RNVC: 9
116318: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-408-4986
Fluid Passage Bolt

144084986
0AVC21X20-27N: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-401-3432
Tube To Boss Straight Adapter

144013432
2016-908: RNCC: 3 | RNVC: 2

5 Jun 1985

4730-14-378-6591
Threaded Tube Fitting Plug

143786591
8200800066: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-398-5893
Tube Tee

143985893
GSM164-055F13: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-304-4551
Fluid Pressure Line Multiple Connector

143044551
F781-20: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-493-3018
Graisseur

144933018
NO PRIMARY REF14-493-3018: RNCC: 3 | RNVC: 2
GF90445: RNCC: 5 | RNVC: 9
F300 0T 012 1535: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-564-4330
Tube Coupling

145644330
8931293902: RNCC: 3 | RNVC: 2
A231004000065: RNCC: 5 | RNVC: 2

29 Apr 2010

4730-14-566-1841
Pipe Reducer

145661841
A013560 02 04: RNCC: 3 | RNVC: 2

26 Oct 2010

4730-14-508-1153
Quick Disconnect Coupling Half

145081153
4918-2-210: RNCC: 3 | RNVC: 2

26 Aug 1998

4730-14-273-5435
Raccord Male

142735435
0799-1231: RNCC: 3 | RNVC: 2
0799-0231: RNCC: 5 | RNVC: 2
NFEN560: RNCC: 5 | RNVC: 2
SAF0799-1231: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-321-6360
Tube To Boss Straight Adapter

143216360
3210-94-40-001-1: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-414-6818
Fluid Passage Bolt

144146818
4730HK-VSCI10,2: RNCC: 2 | RNVC: 2
MEC10517: RNCC: 3 | RNVC: 2

24 Feb 1987

4730-14-479-9216
Quick Disconnect Coupling Half

144799216
K05K51-201: RNCC: 3 | RNVC: 2

14 Feb 1996

4730-14-342-0592
Quick Disconnect Coupling Half

143420592
RBE08-6813: RNCC: 3 | RNVC: 2
RBE8-6813: RNCC: 5 | RNVC: 2

14 Apr 1977

4730-14-423-4388
Pipe Flange

144234388
UA50088006PN250-11D1DN50: RNCC: 2 | RNVC: 2
4730HCPN250DN05011D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-567-2564
Hose Reducer

145672564
NSA855036-1210: RNCC: 1 | RNVC: 2
PE20204J-1210: RNCC: 3 | RNVC: 2
NSA855036-1210: RNCC: 5 | RNVC: 2

25 Feb 2011

4730-14-545-4161
Tube To Boss Straight Adapter

145454161
SDA15G1/4PC: RNCC: 3 | RNVC: 2

12 Apr 2005

4730-14-412-1818
Tube To Boss Straight Adapter

144121818
4A12-8-13CYLNU: RNCC: 3 | RNVC: 2
202425814070: RNCC: 5 | RNVC: 2

8 Oct 1986

4730-14-333-5244
Barillet A 6 Voies

143335244
GSM163-023F7: RNCC: 3 | RNVC: 2
GSM163-23F7: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-538-8115
Tube Coupling Assembly

145388115
NGM0011042650898: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-543-4096
Water Distribution Nozzle

145434096
Y0830.48MA: RNCC: 3 | RNVC: 2

27 Oct 2004

4730-14-325-6792
Fluid Pressure Line Multiple Connector

143256792
0000364680: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-534-2485
Tube To Boss Straight Adapter

145342485
1931: RNCC: 3 | RNVC: 2

19 Mar 2003

4730-14-275-9056
Sediment Strainer Element

142759056
51K181: RNCC: 3 | RNVC: 9

1 Jan 1971

4730-14-545-0557
Tube Coupling

145450557
19211716: RNCC: 3 | RNVC: 2
118235.26.25: RNCC: 3 | RNVC: 2

16 Mar 2005

4730-14-513-6640
Quick Disconnect Coupling Half

145136640
N00931797: RNCC: 3 | RNVC: 2

1 Apr 1999

4730-14-325-0698
Tube Tee

143250698
R6X10SX8: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-331-1213
Fluid Pressure Line Multiple Connector

143311213
3008576: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-212-1197

4730-14-250-0675

4730-14-564-3344
Tube-Pipe Fitting Kit

145643344
KRCY 2 S: RNCC: 3 | RNVC: 2

23 Apr 2010

4730-14-354-8465
Fluid Pressure Line Multiple Connector

143548465
150367: RNCC: 3 | RNVC: 2

20 Feb 1979

4730-14-238-9825
Fluid Pressure Line Multiple Connector

142389825
L351017: RNCC: 3 | RNVC: 2
351017: RNCC: 5 | RNVC: 2
35457: RNCC: 5 | RNVC: 2
B295709: RNCC: 5 | RNVC: 2
295709: RNCC: 5 | RNVC: 9
062711430: RNCC: 5 | RNVC: 9
711430: RNCC: 5 | RNVC: 9
DBAL351017: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-201-9343
Obturateur Pour Ecr

142019343
ES1U6Z7: RNCC: 3 | RNVC: 2
9464-06018: RNCC: 3 | RNVC: 2
679-206-018-0: RNCC: 5 | RNVC: 2
679-206-018-0: RNCC: 8 | RNVC: 2

1 Jan 1962

4730-14-336-5914
Tube To Boss Straight Adapter

143365914
NO PRIMARY REF14-336-5914: RNCC: 3 | RNVC: 2
MT85402882: RNCC: 5 | RNVC: 9

14 Aug 1976

4730-14-239-0745
Raccord Equerre Ori

142390745
5509-14-18-150: RNCC: 3 | RNVC: 2
5927269: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-387-5164
Bride Raccordement

143875164
GSM162-007F21: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-446-0241
Filtre Adaptateur

144460241
084-18-101: RNCC: 3 | RNVC: 2

4 Mar 1991

4730-14-344-7059
Fluid Pressure Line Multiple Connector

143447059
EA1M752-001: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-556-9678
Suction Strainer

145569678
CLA-Q00019X00: RNCC: 3 | RNVC: 2

24 Apr 2008

4730-14-575-7312
Hose Elbow

145757312
NSA855037-16: RNCC: 1 | RNVC: 2
PE20225J-16S: RNCC: 3 | RNVC: 2
NSA855037-16: RNCC: 5 | RNVC: 2

26 Apr 2013

4730-14-434-7110
Adaptateur Bride

144347110
BN329515C2DN40AC: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-364-4136
Sediment Strainer Element

143644136
207226: RNCC: 3 | RNVC: 2

6 Aug 1980

4730-14-240-2393
Bouchon Equipe

142402393
152006: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-333-5176
Barillet A 6 Voies

143335176
GSM163-007BF33: RNCC: 3 | RNVC: 2
GSM163-07BF33: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-449-5392
Tube Union

144495392
UNION MALE R1/4 2353S10,2: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-294-9288
Tube Fitting Brazing Ferrule

142949288
7062BB1B1966EMT1-14CUB: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-374-8672

4730-14-283-6230
Raccord Special

142836230
262-10-74143-01: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-261-8486
Pipe Flange

142618486
RUHB3-30: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-342-0593
Quick Disconnect Coupling Half

143420593
RBE08-6816: RNCC: 3 | RNVC: 2
RBE8-6816: RNCC: 5 | RNVC: 2

14 Apr 1977

4730-14-473-0693
Manchette Demontabl

144730693
MAT162-0064F15: RNCC: 3 | RNVC: 2

7 Dec 1994

4730-14-428-9281
Quick Disconnect Coupling Half

144289281
RBE11-1102/OD/IA: RNCC: 3 | RNVC: 2

28 Dec 1988

4730-14-452-3326
Bulkhead Hose Connector

144523326
F0532S4710X0002-9033: RNCC: 3 | RNVC: 2
LW101-NW5379N: RNCC: 3 | RNVC: 2
S4710X0002-9033: RNCC: 5 | RNVC: 2

8 Jan 1992

4730-14-573-4241
Branched Tubing Connector

145734241
P1-0273-A: RNCC: 3 | RNVC: 2

11 Oct 2012

4730-14-561-6046
Tube To Boss Straight Adapter

145616046
10M18F82EDMLOS: RNCC: 3 | RNVC: 2
2501003160: RNCC: 5 | RNVC: 2
20 250 100 3160: RNCC: 5 | RNVC: 9

3 Aug 2009

4730-14-272-5568

4730-14-416-4901
Tube Vers Tuy Coude

4730-14-403-4262

4730-14-420-5541
Vap Purgeur Element

4730-14-566-9535
Tube Nipple

145669535
82535619000: RNCC: 3 | RNVC: 2

20 Jan 2011

4730-14-508-0165
Tube Tee

145080165
130CU10: RNCC: 3 | RNVC: 9
1911060137: RNCC: 5 | RNVC: 9

26 Aug 1998

4730-14-417-7733
Tube To Boss Straight Adapter

144177733
8401258766NU: RNCC: 3 | RNVC: 2

22 Jul 1987

4730-14-494-5451
Tube To Boss Straight Adapter

144945451
641 090 10: RNCC: 3 | RNVC: 2
64109010: RNCC: 5 | RNVC: 2
64109010: RNCC: 5 | RNVC: 2
F300 0T 017 4628: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-547-8230
Tube To Hose Straight Adapter

145478230
200911: RNCC: 3 | RNVC: 2
V873002: RNCC: 5 | RNVC: 2

17 Nov 2005

4730-14-407-6859
Helical Compression Spring Retainer

144076859
415631: RNCC: 3 | RNVC: 2

27 Feb 1986

4730-14-275-6843

4730-14-516-0540
Fluid Flow Restrictor

145160540
SIFLS1R001200F4AREP5B: RNCC: 3 | RNVC: 2

8 Sep 1999

4730-14-313-7316
Hose Coupling Assembly

143137316
RT13726: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-040-6440
Raccord

140406440
1310-4-48: RNCC: 3 | RNVC: 2
1310-4-48: RNCC: 5 | RNVC: 2
1310-4-48: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-326-3631

4730-14-221-2454
Bride De Refoulemen

142212454
NO PRIMARY REF14-221-2454: RNCC: 3 | RNVC: 2
8098152: RNCC: 5 | RNVC: 2
1994: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-349-4857

4730-14-356-7643

4730-14-326-8325
Tube Tee

143268325
9104060066: RNCC: 3 | RNVC: 2
CA7-6: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-360-9945
Tube Coupling

143609945
BEA40-1 1-4: RNCC: 3 | RNVC: 2
GIRBEA40-1 1-4: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-560-0994
Tube Coupling Nut

145600994
ABS0107-100: RNCC: 1 | RNVC: 2
GC437-16: RNCC: 3 | RNVC: 2
3-3616-100: RNCC: 3 | RNVC: 2
3-3616-100: RNCC: 3 | RNVC: 2
G603-16D: RNCC: 3 | RNVC: 2
ABS0107-100: RNCC: 5 | RNVC: 2

24 Mar 2009

4730-14-307-5176
Tube To Boss Straight Adapter

143075176
1840101A: RNCC: 3 | RNVC: 2
9849997: RNCC: 5 | RNVC: 9
PA1592: RNCC: 5 | RNVC: 9
9-84-99-97A: RNCC: 5 | RNVC: 9
1-84-01-01A: RNCC: 5 | RNVC: 9
9-84-99-97: RNCC: 5 | RNVC: 9
85-656-4780: RNCC: 6 | RNVC: 9

1 Jan 1974

4730-14-338-1452
Lubrication Fitting

143381452
5002 1-4GAZ: RNCC: 3 | RNVC: 2
ALG5002 1-4GAZ: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-397-9385
Tube To Hose Straight Adapter

143979385
12-20 1-2BGSNU: RNCC: 3 | RNVC: 2
UMA20X1-2BGSNNU: RNCC: 3 | RNVC: 2
4A20 1-2BGSNU: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-254-8978
Fluid Passage Bolt

142548978
5B4-8X100: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-462-0466
Quick Disconnect Coupling Half

144620466
2MP12130258: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-254-0556
Fluid Passage Bolt

142540556
11221530Q: RNCC: 3 | RNVC: 2
22153: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-041-9160
Tube Coupling

140419160
0264357550: RNCC: 3 | RNVC: 2

1 Jun 1976

4730-14-357-9226
Pipe Flange

143579226
TLH0TB223: RNCC: 3 | RNVC: 2

20 Jul 1979

4730-14-522-0497
Pipeline Flexible Connection

145220497
MB4185F00: RNCC: 3 | RNVC: 2

2 Oct 2000

4730-14-522-4852
Self-Sealing Coupling Assembly

145224852
2108-903: RNCC: 3 | RNVC: 2

31 Oct 2000

4730-14-354-0934
Tube To Boss Straight Adapter

143540934
A32170: RNCC: 3 | RNVC: 2

16 Jan 1979

4730-14-392-4436
Lubrication Fitting

143924436
ZNP011000: RNCC: 3 | RNVC: 9

21 Mar 1984

4730-14-403-5152
Self-Sealing Coupling Assembly

144035152
N00327376: RNCC: 3 | RNVC: 2

21 Aug 1985

4730-14-515-5926
Tube To Boss Straight Adapter

145155926
45000005A: RNCC: 3 | RNVC: 2

21 Jul 1999

4730-14-377-6538

4730-14-562-6609
Tube Reducer

145626609
RED10/06LOMDCF: RNCC: 3 | RNVC: 2
A231004000401: RNCC: 5 | RNVC: 2
40009105: RNCC: 5 | RNVC: 2
RED10/06LOMDCF: RNCC: 5 | RNVC: 9

12 Nov 2009

4730-14-340-6720
Tube Coupling Assembly

143406720
0-3601S10A: RNCC: 3 | RNVC: 2
0-3601S10A: RNCC: 5 | RNVC: 9
85-688-9377: RNCC: 6 | RNVC: 9

14 Feb 1977

4730-14-516-4397
Tube Union

145164397
NO PRIMARY REF14-516-4397: RNCC: 3 | RNVC: 2
MAT162-0232F7REPG: RNCC: 3 | RNVC: 2
1851333: RNCC: 5 | RNVC: 2
GRIP L 133.0NBR INOX: RNCC: 5 | RNVC: 2

24 Sep 1999

4730-14-293-1746

4730-14-268-5070

4730-14-417-7810
Tube To Boss Straight Adapter

144177810
LW110-NC1420S: RNCC: 3 | RNVC: 2
8401148047NU: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-532-5801
Tube Coupling

145325801
418365: RNCC: 3 | RNVC: 2
Z59813308PL9REP8: RNCC: 5 | RNVC: 2

15 Nov 2002

4730-14-365-9491

4730-14-347-5406

4730-14-395-4256
Bouchon Et Joint

143954256
2950-2001: RNCC: 3 | RNVC: 2
SAF2950-2001: RNCC: 5 | RNVC: 9

13 Oct 1984

4730-14-249-2124
Te Dalimentation

142492124
152353: RNCC: 3 | RNVC: 2
5100103936: RNCC: 3 | RNVC: 2
5172097400: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-306-7094

4730-14-245-0944
Raccord Soude A La

142450944
D1010-649: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-368-8818
Tube To Boss Straight Adapter

143688818
Q1-5GE30SM42-200EQUIPE: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-423-4039
Pipe Flange

144234039
UA50088006PN20-12D2DN100: RNCC: 2 | RNVC: 2
4730HBPN20DN10012D2: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-230-4692
Tube Tee

142304692
17-14TF: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-554-2415
Tube To Boss Straight Adapter

145542415
358 405: RNCC: 3 | RNVC: 2
358 405: RNCC: 3 | RNVC: 2

14 Jun 2007

4730-14-040-0054
Fluid Passage Bolt

140400054
0000280590: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-445-5863
Fluid Pressure Line Multiple Connector

144455863
BLC236384: RNCC: 3 | RNVC: 2

18 Feb 1991

4730-14-503-1745
Bulkhead Hose Connector

145031745
RA1M534303150: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-504-5988
Tube To Boss Straight Adapter

145045988
09930015: RNCC: 3 | RNVC: 2

25 Feb 1998

4730-14-429-5393
Quick Disconnect Coupling Half

144295393
HX0502100: RNCC: 3 | RNVC: 2

30 Jan 1989

4730-14-443-2104
Fluid Pressure Line Multiple Connector

144432104
1202012: RNCC: 3 | RNVC: 2

12 Nov 1990

4730-14-540-3686
Pipe To Boss Straight Adapter

145403686
NNP4730870600778: RNCC: 3 | RNVC: 2

18 Mar 2004

4730-14-275-6846

4730-14-516-3867
Tube To Boss Straight Adapter

145163867
205746: RNCC: 3 | RNVC: 2

22 Sep 1999

4730-14-378-4536
Tube To Boss Straight Adapter

143784536
A87519: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-428-9859

4730-14-408-3875

4730-14-252-1692
Fluid Passage Bolt

142521692
80113: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-474-9711
Filler Cap Adapter Assembly

144749711
CR444395: RNCC: 3 | RNVC: 2
444395: RNCC: 5 | RNVC: 2
EA20118: RNCC: 5 | RNVC: 2

16 Mar 1995

4730-14-216-1183
Pipe To Boss Straight Adapter

142161183
A72338: RNCC: 3 | RNVC: 2
172338: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-507-2677
Quick Disconnect Plug

145072677
NC4034080: RNCC: 3 | RNVC: 2

24 Jun 1998

4730-14-528-9818
Fluid Flow Restrictor

145289818
85203: RNCC: 3 | RNVC: 2

27 Feb 2002

4730-14-411-2330
Flange To Tube Straight Adapter

144112330
8814650900: RNCC: 3 | RNVC: 2

6 Aug 1986

4730-14-388-7988
Hose To Boss Straight Adapter

143887988
418101104: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-521-2591
Quick Disconnect Coupling Half

145212591
1823373025: RNCC: 3 | RNVC: 2
SYB0984: RNCC: 5 | RNVC: 2

13 Jul 2000

4730-14-362-8252

4730-14-340-1277

4730-14-378-4153
Bulkhead Hose Connector

143784153
366A68-1367-20: RNCC: 3 | RNVC: 2

21 Mar 1996

4730-14-324-1347
Barillet Cinq Voies

143241347
GSM163-006F16AVECECR0USRACC0RD: RNCC: 3 | RNVC: 2
GSM163-06F16AVECECR0USRACC0RD: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-481-4004
Tube Fitting Clinch Sleeve

144814004
BAGUESERTISSAGEDIAM76/80L40TUYAU: RNCC: 3 | RNVC: 2

3 May 1996

4730-14-284-9988
Tube To Boss Straight Adapter

142849988
52-14-15-21CYL: RNCC: 3 | RNVC: 2
UML14X15-21N: RNCC: 3 | RNVC: 2
4L14-15-21CYL: RNCC: 3 | RNVC: 2
ML14-21: RNCC: 3 | RNVC: 2
52-14-15-21: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-520-4379
Tube Union

145204379
M45AA0101-506: RNCC: 3 | RNVC: 2
M45AA0101-506: RNCC: 5 | RNVC: 9

17 May 2000

4730-14-363-6697
Pipe Flange

143636697
H1078TS2PL8A: RNCC: 3 | RNVC: 2

6 Jul 1980

4730-14-503-6778
Tube To Boss Straight Adapter

145036778
14985: RNCC: 3 | RNVC: 2

23 Jan 1998

4730-14-225-0981
Bouchon De Niveau

142250981
8098720: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-276-6379
Adapteur Pour Manch

142766379
N0813-432-02-17: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-565-3708
Tube Reducer

145653708
RED30/25SOMDCF: RNCC: 3 | RNVC: 2
A231004000223: RNCC: 5 | RNVC: 2

11 Aug 2010

4730-14-295-6223

4730-14-356-6289

4730-14-212-9910

4730-14-297-8933
Bloc De Derivation

142978933
411MA0162FA23: RNCC: 3 | RNVC: 2
411MA162FA23: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-298-4558

4730-14-572-9406
Tube Coupling

145729406
B009649: RNCC: 3 | RNVC: 2

29 Aug 2012

4730-14-213-4145
Fluid Passage Bolt

142134145
L44-312-10AU4G: RNCC: 2 | RNVC: 2
80109: RNCC: 3 | RNVC: 2
80109: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-372-3842
Tube To Boss Straight Adapter

143723842
P4-1DM16-20X150: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-465-5884
Pipe To Tube Swivel Joint

144655884
558290: RNCC: 3 | RNVC: 2
SOG558290: RNCC: 5 | RNVC: 9
85-694-8580: RNCC: 6 | RNVC: 9

30 Sep 1993

4730-14-324-7764
Tube Tee

143247764
GSM163-004F16AVECECROUSRACCORD: RNCC: 3 | RNVC: 2
GSM163-04F16AVECECR0USRACC0RD: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-214-5201
Lubrication Fitting

142145201
NO PRIMARY REF14-214-5201: RNCC: 3 | RNVC: 2
8511108: RNCC: 5 | RNVC: 2
0851110800: RNCC: 5 | RNVC: 2
0944100125: RNCC: 5 | RNVC: 2
0944100125: RNCC: 5 | RNVC: 9
944100125: RNCC: 5 | RNVC: 9
GG336-08-125: RNCC: 5 | RNVC: 9
8511108: RNCC: 5 | RNVC: 9
944100125: RNCC: 6 | RNVC: 9

1 Jan 1965

4730-14-397-9388
Tube To Gas Fitting Straight Adapter

143979388
UFA16X15-21NNU: RNCC: 3 | RNVC: 2
6A16-15-21NU: RNCC: 3 | RNVC: 2
13-16-15-21NU: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-412-3315
Quick Disconnect Coupling Half

144123315
RBE06-6810/IA: RNCC: 3 | RNVC: 2
RBE06-6810IA: RNCC: 5 | RNVC: 2

8 Oct 1986

4730-14-297-8595

4730-14-365-7173
Adaptateur Dazote

143657173
003874035P: RNCC: 3 | RNVC: 2

8 Oct 1980

4730-14-403-3915
Tube Fitting Clinch Sleeve

144033915
DAG17S: RNCC: 3 | RNVC: 2

21 Aug 1985

4730-14-359-5886
Tube To Boss Straight Adapter

143595886
221754: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-461-1983
Tube Union

144611983
5012307: RNCC: 3 | RNVC: 2

2 Mar 1993

4730-14-223-8635
Raccord A Joint Cou

142238635
GSM1297FD4-2TABLEAU1D1-25: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-563-8085
Fluid Pressure Line Multiple Connector

145638085
SWVE06LROMDCF: RNCC: 3 | RNVC: 2
XSWVE06-LR-C: RNCC: 5 | RNVC: 2

17 Mar 2010

4730-14-413-4650
Tube To Boss Straight Adapter

144134650
RI1X1/271X: RNCC: 3 | RNVC: 2
RI1X1/2-1.4571: RNCC: 3 | RNVC: 2
RI1X1/2-1.4571: RNCC: 5 | RNVC: 2
RI1X1/2-71: RNCC: 5 | RNVC: 2
J05190-00-0000T052: RNCC: 5 | RNVC: 2

17 Dec 1986

4730-14-489-0826
Tube Tee

144890826
T10-L/A3C: RNCC: 3 | RNVC: 2
T10-L/A3C: RNCC: 3 | RNVC: 9
T10-PL/A3C: RNCC: 5 | RNVC: 9

24 Jun 1997

4730-14-303-0035
Tube Fitting Brazing Ferrule

143030035
GSM163-011REP36-1F6: RNCC: 3 | RNVC: 2
GSM163-11AREP36-1: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-413-2308
Radiateur

144132308
5355016: RNCC: 3 | RNVC: 2
5355016: RNCC: 5 | RNVC: 9

26 Nov 1986

4730-14-413-8652
Cloison Traversee

144138652
206490: RNCC: 3 | RNVC: 2

22 Jan 1987

4730-14-313-4856
Sediment Strainer Element

143134856
401MA0375REP13: RNCC: 3 | RNVC: 2
401MA375REP13: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-513-7612
Tube Coupling

145137612
9962711308: RNCC: 3 | RNVC: 2

13 Apr 1999

4730-14-237-0352
Raccord Special

142370352
E2228E: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-557-3094
Special Nipple

145573094
DET05AEBTDRM010: RNCC: 3 | RNVC: 2

2 Jun 2008

4730-14-577-8542
Pipe To Tube Elbow

145778542
3629 06 10: RNCC: 3 | RNVC: 2

15 Oct 2013

4730-14-338-3390
Raccord Special

143383390
GSM164-021F4: RNCC: 3 | RNVC: 2
A0143-011F4: RNCC: 5 | RNVC: 2

6 Nov 1976

4730-14-221-9766

4730-14-257-2080
Tube Tee

142572080
330A72-6172-20: RNCC: 3 | RNVC: 2
330A72-6172-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-577-1470
Hose To Boss Straight Adapter

145771470
11886: RNCC: 3 | RNVC: 2

14 Aug 2013

4730-14-269-1932

4730-14-577-1835
Tube Swivel Joint

145771835
12 74 67: RNCC: 3 | RNVC: 2

20 Aug 2013

4730-14-392-4859
Contre-Bride

143924859
H20BM00014: RNCC: 3 | RNVC: 9

21 Mar 1984

4730-14-566-8944
Hydraulic System Accessories Manifold

145668944
721422: RNCC: 3 | RNVC: 2

11 Jan 2011

4730-14-575-4596
Hose Cross

145754596
D207 02B: RNCC: 3 | RNVC: 2

8 Apr 2013

4730-14-252-9748
Tube To Boss Straight Adapter

142529748
9GAZC022-25XG3-4: RNCC: 3 | RNVC: 2
9GAZC022-25XG3-4: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-374-7413
Self-Sealing Coupling Half

143747413
1-75-605: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-472-0340
Raccord Flexible

144720340
MAT166-3006VERSIONA: RNCC: 3 | RNVC: 2

5 Oct 1994

4730-14-473-6316
Tube To Boss Straight Adapter

144736316
129039: RNCC: 3 | RNVC: 2
Q88GA14-1/2BSTP S NU: RNCC: 5 | RNVC: 2
20322217: RNCC: 5 | RNVC: 2
91372859: RNCC: 5 | RNVC: 2

4 Jan 1995

4730-14-474-7026
Quick Disconnect Coupling Half

144747026
N00228895: RNCC: 3 | RNVC: 2
RBE19-1825/IC/OD/JE/SP: RNCC: 5 | RNVC: 2

27 Feb 1995

4730-14-216-2132
Tube Tee

142162132
R7620: RNCC: 3 | RNVC: 2
85-514-3351: RNCC: 6 | RNVC: 9

1 Jan 1965

4730-14-399-6911
Diaphragme Reducteu

143996911
6784-1CI6-100: RNCC: 3 | RNVC: 9

6 Mar 1985

4730-14-367-7357

4730-14-261-3898
Bouchon Special

142613898
77877: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-306-7100
Debit Visible Purge

143067100
R28761SM: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-224-0861

4730-14-349-0907
Corps Raccord Tourn

143490907
3013219: RNCC: 3 | RNVC: 2

19 Apr 1978

4730-14-565-0002
Pipeline Flexible Connection

145650002
337B50: RNCC: 3 | RNVC: 2

28 Jun 2010

4730-14-448-9842
Tube To Boss Straight Adapter

144489842
XGE8PSR: RNCC: 3 | RNVC: 2

24 Jul 1991

4730-14-565-0327
Tube Union

145650327
D62479: RNCC: 3 | RNVC: 2

30 Jun 2010

4730-14-365-9802

4730-14-223-8686

4730-14-340-8940

4730-14-334-2660
Tube Tee

143342660
Q1-47-6Q3-105PQ1-5-404: RNCC: 3 | RNVC: 2

23 Apr 1976

4730-14-577-5909
Tube Tee

145775909
ABS2009-060606: RNCC: 1 | RNVC: 2
ABS2009-060606: RNCC: 3 | RNVC: 2
ABS2009-060606: RNCC: 5 | RNVC: 2

26 Sep 2013

4730-14-479-7409
Embout Bride Plane

144797409
MAT171-1982F1: RNCC: 3 | RNVC: 2

2 Feb 1996

4730-14-446-4708
Flange To Tube Elbow

144464708
0294301180: RNCC: 3 | RNVC: 2
302-292-801-0: RNCC: 5 | RNVC: 2

20 Mar 1991

4730-14-525-6310
Return Tube Bend

145256310
20 236 913 2310: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-292-8533
Tube To Boss Straight Adapter

142928533
DLT047819: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-354-7563
Fluid Pressure Line Multiple Connector

143547563
150481: RNCC: 3 | RNVC: 2

20 Feb 1979

4730-14-369-4450
Fluid Pressure Line Multiple Connector

143694450
RLCCM5: RNCC: 3 | RNVC: 9

17 Apr 1981

4730-14-220-6146
Tube Tee

142206146
R12X12X16: RNCC: 3 | RNVC: 2
R14440: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-523-6550
Tube To Boss Straight Adapter

145236550
F5137584: RNCC: 3 | RNVC: 2

31 Jan 2001

4730-14-336-0166
Rapid Action Coupled Pipe Cap

143360166
83642: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-375-2241
Fluid Passage Bolt

143752241
5000043682: RNCC: 3 | RNVC: 2
5000043682: RNCC: 5 | RNVC: 9

26 Feb 1982

4730-14-441-4652
Tube Coupling

144414652
053512801: RNCC: 3 | RNVC: 2

29 Aug 1990

4730-14-418-0317
Quick Disconnect Coupling Assembly

144180317
FD5112: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-365-9534
Quick Disconnect Coupling Assembly

143659534
SJA32CDB: RNCC: 3 | RNVC: 2

4 Nov 1980

4730-14-529-3709
Ens Flexible Crepin

145293709
704066: RNCC: 3 | RNVC: 2

26 Mar 2002

4730-14-334-2654

4730-14-290-9493

4730-14-504-0368
Self-Sealing Coupling Half

145040368
704A34-421-027: RNCC: 1 | RNVC: 2
9.94.94.35A: RNCC: 3 | RNVC: 2
994-9435A: RNCC: 5 | RNVC: 9
9949779: RNCC: 5 | RNVC: 9

4 Feb 1998

4730-14-469-8667
Desurgeur

144698667
NO PRIMARY REF14-469-8667: RNCC: 3 | RNVC: 2
NM013-5-D-D-0001: RNCC: 5 | RNVC: 9

17 May 1994

4730-14-209-1256
Raccord Equipe

142091256
NO PRIMARY REF14-209-1256: RNCC: 3 | RNVC: 2
215566: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-217-5362

4730-14-442-1065
Embout Equipe

144421065
K05G44-201: RNCC: 3 | RNVC: 2

1 Oct 1990

4730-14-446-4722
Flange To Tube Elbow

144464722
0294401990: RNCC: 3 | RNVC: 2
302-266-202-0: RNCC: 5 | RNVC: 2

20 Mar 1991

4730-14-248-1471

4730-14-355-5593

4730-14-272-0808

4730-14-336-0165
Clapet Raccord Rapi

143360165
83645: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-503-2774
Pipe Flange

145032774
332A55-1020-01: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-398-5917
Tube Fitting Brazing Ferrule

143985917
4730AMF2PN250DE14: RNCC: 2 | RNVC: 2
GSM164-062F4Z0NEB: RNCC: 3 | RNVC: 2
MAT164-0352F4ZONEB: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-363-7024
Tube Coupling Nut Assembly

143637024
E-JETSD60-8P: RNCC: 3 | RNVC: 2
EJET60-8: RNCC: 5 | RNVC: 2
KE-JETSD60-8P: RNCC: 5 | RNVC: 2

6 Jul 1980

4730-14-397-9382
Tube To Hose Straight Adapter

143979382
12-16 1-2BGSNU: RNCC: 3 | RNVC: 2
UMA16X1-2BGSNNU: RNCC: 3 | RNVC: 2
4A16 1-2BGSNU: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-427-3358
Tube Tee

144273358
4730HDING273X6,3-219,1X5,6: RNCC: 2 | RNVC: 2

13 Oct 1988

4730-14-519-8617
Flange To Boss Straight Adapter

145198617
4001-9-23: RNCC: 3 | RNVC: 2

13 Apr 2000

4730-14-557-5751
Union Thread Piece

145575751
50108365: RNCC: 3 | RNVC: 2

24 Jun 2008

4730-14-428-5103
Fluid Pressure Line Multiple Connector

144285103
P432B08: RNCC: 3 | RNVC: 2
732.B.08: RNCC: 3 | RNVC: 2
74732B08: RNCC: 5 | RNVC: 2
74732B08: RNCC: 5 | RNVC: 2
164881: RNCC: 5 | RNVC: 2
732 B 08: RNCC: 5 | RNVC: 2
732B08: RNCC: 5 | RNVC: 2

8 Dec 1988

4730-14-333-3473
Manchon Adaptateur

143333473
G1631REP1234568910ACIER: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-572-1548
Pipe Outlet

145721548
PAAG141796: RNCC: 3 | RNVC: 2

12 Jun 2012

4730-14-289-9841

4730-14-293-0581

4730-14-365-3019

4730-14-354-2817
Lubrication Fitting

143542817
7022-022: RNCC: 3 | RNVC: 2
23002270: RNCC: 5 | RNVC: 9
ALG7022-022: RNCC: 5 | RNVC: 9

30 Jan 1979

4730-14-546-2037
Quick Disconnect Coupling Half

145462037
RBE03.1100/IC/OS: RNCC: 3 | RNVC: 2
RBE03/1100/IC/OS: RNCC: 5 | RNVC: 9

15 Jun 2005

4730-14-555-0834
Tube To Hose Straight Adapter

145550834
329-93-109: RNCC: 3 | RNVC: 2

27 Sep 2007

4730-14-510-7351
Swivel Flange To Hose Straight Adapter

145107351
3K04-101: RNCC: 3 | RNVC: 2

10 Nov 1998

4730-14-522-7917
Hose To Grooved Clamp Coupling Straight Adapter

145227917
EBB22/26: RNCC: 3 | RNVC: 2
EBB22/26: RNCC: 5 | RNVC: 9

23 Nov 2000

4730-14-418-3545
Quick Disconnect Coupling Half

144183545
RBE06-2806IA6: RNCC: 3 | RNVC: 2

12 Aug 1987

4730-14-263-1422

4730-14-212-1192

4730-14-575-8005
Tube Coupling

145758005
KQ2H08-02S: RNCC: 3 | RNVC: 2

2 May 2013

4730-14-330-8010
Barillet A 4 Voies

143308010
GSM523-026F4: RNCC: 3 | RNVC: 2
GSM523-26F4: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-207-8788
Tube Union

142078788
EN10242-U12-3/4-FE-A: RNCC: 2 | RNVC: 2
770341105: RNCC: 3 | RNVC: 2
341 3-4: RNCC: 5 | RNVC: 2
RAR1325: RNCC: 5 | RNVC: 2
770 341 105: RNCC: 5 | RNVC: 2
E29801U6E: RNCC: 5 | RNVC: 9
264 3-4: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-333-5159
Barillet A 6 Voies

143335159
GSM163-007BF15: RNCC: 3 | RNVC: 2
GSM163-07BF15: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-260-9114
Pipe Flange

142609114
7062CA1F1-121AF42-2: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-442-6018
Tube To Boss Straight Adapter

144426018
42-14 1-8BGS: RNCC: 3 | RNVC: 2
42.14 1/8BGS: RNCC: 5 | RNVC: 2

23 Oct 1990

4730-14-294-2279
Tube Coupling

142942279
121E52-177-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-333-5165
Barillet A 6 Voies

143335165
GSM163-007BF21: RNCC: 3 | RNVC: 2
GSM163-07BF21: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-220-5289
Obturateur Pour Ecr

142205289
ES1U8Z8: RNCC: 3 | RNVC: 2
679-208-018-0: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-494-0885
Hydraulic System Accessories Manifold

144940885
202420206650: RNCC: 3 | RNVC: 2
F300 0T 015 4251: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-509-2631
Fluid Pressure Line Multiple Connector

145092631
0000280550: RNCC: 3 | RNVC: 2

21 Oct 1998

4730-14-239-5172

4730-14-530-7601
Pipe To Hose Straight Adapter

145307601
839127020: RNCC: 3 | RNVC: 2

3 Jul 2002

4730-14-500-6272
Flange To Grooved Clamp Straight Adapter

145006272
E64101000005: RNCC: 3 | RNVC: 2
F300 0T 024 6456: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-335-9274
Tube To Boss Straight Adapter

143359274
52745N: RNCC: 3 | RNVC: 2
52745N: RNCC: 5 | RNVC: 2

24 Jul 1976

4730-14-332-0664
Bulkhead Hose Connector

143320664
R7010Z90: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-504-4831
Pipe Flange

145044831
TR95908: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-323-9210
Pipe Flange

143239210
7062TD1F1F98UE12: RNCC: 2 | RNVC: 2

1 Jan 1975

4730-14-250-5224
Sediment Strainer Element

142505224
120-46DIA10BZ: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-270-5109
Sediment Strainer Element

142705109
556674: RNCC: 3 | RNVC: 9

1 Jan 1970

4730-14-408-4451
Tube To Boss Straight Adapter

144084451
LW114-NS0604S: RNCC: 3 | RNVC: 2
89010613NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-392-9361
Tube Tee

143929361
0024248655: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-548-4555
Lubricant Pressure Relief Fitting

145484555
20315151: RNCC: 3 | RNVC: 2
25613372: RNCC: 5 | RNVC: 9

18 Jan 2006

4730-14-269-2023
Pipe Flange

142692023
7066ED1F57: RNCC: 2 | RNVC: 2
4730BH-57F: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-041-2606

4730-14-333-2502
Self-Sealing Coupling Assembly

143332502
4001-9-41-02: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-426-6231
Fluid Flow Restrictor

144266231
NO PRIMARY REF14-426-6231: RNCC: 3 | RNVC: 2
572168: RNCC: 5 | RNVC: 9
851010111: RNCC: 5 | RNVC: 9

10 Sep 1988

4730-14-347-7478
Tube To Boss Straight Adapter

143477478
GSM524-038F15: RNCC: 3 | RNVC: 2
A0348-001F19: RNCC: 5 | RNVC: 2

1 Mar 1978

4730-14-250-8052
Tube To Boss Straight Adapter

142508052
G12-17-12-17C0NU: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-346-9431
Fluid Pressure Line Multiple Connector

143469431
341A75-2031-20: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-231-3276

4730-14-406-9806
Te Pour Tub Ebauche

144069806
MAT164-0004F3: RNCC: 3 | RNVC: 2

22 Jan 1986

4730-14-370-1561
Tube To Boss Straight Adapter

143701561
MY20117-022-15: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-524-0884
Tube Tee

145240884
SBMB8-1-4: RNCC: 3 | RNVC: 2
SBMB8-1/4: RNCC: 5 | RNVC: 2
SBMB8-1-4: RNCC: 5 | RNVC: 2

26 Feb 2001

4730-14-399-6746
Hose To Boss Straight Adapter

143996746
BC2740-1-2BSP/K1016: RNCC: 3 | RNVC: 2
BC2740-1-2BSP: RNCC: 5 | RNVC: 2

6 Mar 1985

4730-14-303-3877
Pipe Flange

143033877
JQAT02-06: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-464-9402
Fluid Passage Bolt

144649402
9970-145-415: RNCC: 3 | RNVC: 2

8 Sep 1993

4730-14-208-7865

4730-14-241-2010
Raccord

142412010
30ZAMAC2071: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-322-2109

4730-14-376-3546
Pipe Flange

143763546
065-30-9013PL7AREP3: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-322-5442

4730-14-267-8567
Demi-Raccord Mamelo

142678567
E29574MAMEL0N50-60BR0NZE: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-427-8521
Element Raccord

144278521
AS34TQ104GREP12C: RNCC: 3 | RNVC: 2

17 Nov 1988

4730-14-565-7706
Quick Disconnect Coupling Half

145657706
HA0500200: RNCC: 3 | RNVC: 2

22 Sep 2010

4730-14-268-6458

4730-14-509-5826

4730-14-494-6993
Tube To Boss Straight Adapter

144946993
NO PRIMARY REF14-494-6993: RNCC: 3 | RNVC: 2
017149: RNCC: 5 | RNVC: 9
F300 0T 017 7986: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-302-5729
Tube To Boss Straight Adapter

143025729
702A30-3403-20: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-361-2521
Bulkhead Hose Connector

143612521
K08505-95: RNCC: 3 | RNVC: 2

24 Jan 1980

4730-14-385-8334
Bulkhead Hose Connector

143858334
406305: RNCC: 3 | RNVC: 2
Z808: RNCC: 5 | RNVC: 2
85-692-5774: RNCC: 6 | RNVC: 9

26 Jul 1983

4730-14-229-5824
Raccord Souple Spec

142295824
20005000952: RNCC: 3 | RNVC: 2
A50C: RNCC: 5 | RNVC: 2
AF5180-50-95-2CS8AX: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-340-0892
Tube Tee

143400892
21-4-6X4-6X4-6LAIT0N: RNCC: 3 | RNVC: 2
21-4-6X4-6X4-6LAIT0N: RNCC: 3 | RNVC: 2

18 Jan 1977

4730-14-221-7252
Raccord Orientable

142217252
P6109-16-90E: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-236-0346
Raccord Special

142360346
A2-30603: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-366-7805
Tube Coupling

143667805
209234: RNCC: 3 | RNVC: 2

20 Nov 1980

4730-14-454-5069
Tube-Pipe Fitting Kit

144545069
20322837: RNCC: 3 | RNVC: 2
20322837: RNCC: 5 | RNVC: 9

2 Apr 1992

4730-14-345-0679
Bulkhead Hose Connector

143450679
157262: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-389-6426
Lubrication Fitting

143896426
5002: RNCC: 3 | RNVC: 2
ALG5002: RNCC: 5 | RNVC: 9

20 Dec 1983

4730-14-398-8772
Tube To Hose Straight Adapter

143988772
6156173: RNCC: 3 | RNVC: 2
FOE6156173: RNCC: 5 | RNVC: 9

6 Mar 1985

4730-14-232-6231

4730-14-552-1148
Straight Tubing Connector

145521148
0249862100: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-322-8047

4730-14-439-5015
Tube Union

144395015
H107817: RNCC: 3 | RNVC: 2
89280160: RNCC: 5 | RNVC: 2

10 May 1990

4730-14-333-8796

4730-14-241-2063
Bouchon Femelle Tub

142412063
JGA08-02: RNCC: 3 | RNVC: 2
13580-62: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-432-5408
Tuyau Flexi Raccord

144325408
GMIANP020-01: RNCC: 3 | RNVC: 2

14 Jun 1989

4730-14-556-7040
Hose To Boss Straight Adapter

145567040
GA47617-116: RNCC: 3 | RNVC: 2

3 Apr 2008

4730-14-367-7402

4730-14-432-4705
Pipe Flange

144324705
BN329-506D2DN50: RNCC: 3 | RNVC: 2

14 Jun 1989

4730-14-354-2579
Tube Coupling

143542579
650-24377-00: RNCC: 3 | RNVC: 2

30 Jan 1979

4730-14-235-1129
Tube Tee

142351129
TMCA14X12-17N: RNCC: 3 | RNVC: 2
18-14-12-17C0: RNCC: 3 | RNVC: 2
TMC14-17: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-423-4438
Pipe Flange

144234438
UA50088006PN420-11D1DN20: RNCC: 2 | RNVC: 2
4730HCPN420DN02011D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-542-0307
Tube To Boss Straight Adapter

145420307
20057-599: RNCC: 3 | RNVC: 2
502106009018A: RNCC: 3 | RNVC: 9

2 Jul 2004

4730-14-459-3042
Tube To Boss Straight Adapter

144593042
110651: RNCC: 3 | RNVC: 2
LV115-CS1206S: RNCC: 5 | RNVC: 2

24 Nov 1992

4730-14-376-9264
Quick Disconnect Coupling Half

143769264
95MS011-024: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-212-1900
Tube To Boss Straight Adapter

142121900
MAT164-0310F11: RNCC: 3 | RNVC: 2
GSM164-038F9: RNCC: 5 | RNVC: 2

5 Jul 1980

4730-14-385-4077
Tube To Boss Straight Adapter

143854077
0285321250: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-435-3273
Tube To Boss Straight Adapter

144353273
5A22L26X150: RNCC: 3 | RNVC: 2
5005030299: RNCC: 5 | RNVC: 2
105124457: RNCC: 5 | RNVC: 2

7 Nov 1989

4730-14-508-7235
Tube Coupling

145087235
802073020511: RNCC: 3 | RNVC: 2
SDM802073020511: RNCC: 5 | RNVC: 9

29 Sep 1998

4730-14-290-9505

4730-14-335-8606
Fluid Pressure Line Multiple Connector

143358606
5000130149: RNCC: 3 | RNVC: 2
5000130149: RNCC: 5 | RNVC: 9

24 Jul 1976

4730-14-518-2965
Tube To Boss Straight Adapter

145182965
0117 8633: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-504-5991
Tube To Boss Straight Adapter

145045991
01626001: RNCC: 3 | RNVC: 2

25 Feb 1998

4730-14-545-4042
Tube To Boss Straight Adapter

145454042
DF1E726200107: RNCC: 3 | RNVC: 2

12 Apr 2005

4730-14-502-6168
Fluid Passage Bolt

145026168
5010258450: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-374-7566
Equipe Raccord

143747566
74520: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-527-4041
Tube To Boss Straight Adapter

145274041
H77748: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-536-0474
Tube To Hose Straight Adapter

145360474
PE65407E14: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-501-1274
Return Tube Bend

145011274
8545397: RNCC: 3 | RNVC: 2
F300 0T 025 1674: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-544-7484
Hose Connector Sleeve

145447484
P346517: RNCC: 3 | RNVC: 2
4KK140: RNCC: 5 | RNVC: 2

22 Feb 2005

4730-14-536-0475
Tube To Hose Straight Adapter

145360475
PE65407E16: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-341-5888
Flexible Tube Coupling Assembly

143415888
L40F1: RNCC: 3 | RNVC: 2

16 Mar 1977

4730-14-498-8546
Tube To Boss Straight Adapter

144988546
270129: RNCC: 3 | RNVC: 2
EN0TSZ3703: RNCC: 5 | RNVC: 9
F300 0T 008 7689: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-410-9625
Tube Tee

144109625
4730AJ4.1DN14NU: RNCC: 2 | RNVC: 2
MEC10825: RNCC: 3 | RNVC: 2
Q15T14SNU: RNCC: 3 | RNVC: 2
8404140066NU: RNCC: 5 | RNVC: 2

23 Jul 1986

4730-14-463-0980
Tube To Boss Straight Adapter

144630980
GE06LMED71: RNCC: 3 | RNVC: 2
GE06LMED71: RNCC: 3 | RNVC: 9
GE6PLMED1.4571: RNCC: 5 | RNVC: 9
GE6PLMED71: RNCC: 5 | RNVC: 9

26 May 1993

4730-14-554-5670
Adapter And Flange Assembly

145545670
9943600160: RNCC: 3 | RNVC: 2

20 Jul 2007

4730-14-366-6045

4730-14-353-0986
Tube To Boss Straight Adapter

143530986
190610: RNCC: 3 | RNVC: 2
6019010: RNCC: 3 | RNVC: 2
19-06-10: RNCC: 5 | RNVC: 9

8 Dec 1978

4730-14-473-0440
Quick Disconnect Coupling Half

144730440
RBE06-110IA-PP-OD-HP: RNCC: 3 | RNVC: 2
RBE06 110/IA/PP/OD/HP: RNCC: 5 | RNVC: 2
RBE06.110 M10X1 IAODHPJVPPVDSP: RNCC: 5 | RNVC: 2
S009-251-94: RNCC: 5 | RNVC: 2

6 Dec 1994

4730-14-539-9183
Pipe Coupling Leak Repair Clamp

145399183
MC2000-99: RNCC: 3 | RNVC: 2

18 Feb 2004

4730-14-566-7855
Hose Coupling Assembly

145667855
REC-125-160: RNCC: 3 | RNVC: 2

17 Dec 2010

4730-14-520-0523
Pipeline Flexible Spacer

145200523
E1P-3830-00200: RNCC: 3 | RNVC: 2
E1P-3830-00200: RNCC: 5 | RNVC: 2

10 May 2000

4730-14-372-2728
Tube To Boss Straight Adapter

143722728
UMA16X15-21NNU: RNCC: 3 | RNVC: 2
12-16-15-21CYLNU: RNCC: 3 | RNVC: 2
4A16-15-21CYLNU: RNCC: 3 | RNVC: 2
121514NU: RNCC: 5 | RNVC: 2

1 Sep 1981

Load More Results