What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 64 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 64 of 185

4730-14-412-1288
Tube To Boss Straight Adapter

144121288
LV114-CH0804N: RNCC: 3 | RNVC: 2
UMA8X8-13NCJ8: RNCC: 5 | RNVC: 2
M4HZ745P2020: RNCC: 5 | RNVC: 2

8 Oct 1986

4730-14-448-5720
Tube Coupling

144485720
HBRAPL6-4/6: RNCC: 3 | RNVC: 2
HBRAPL6-4/6: RNCC: 3 | RNVC: 9

2 Jul 1991

4730-14-243-5771
Bouchon

142435771
1-43943: RNCC: 3 | RNVC: 2

23 Jul 1997

4730-14-237-5319
Raccord Traversee D

142375319
401884: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-557-9089
Tube Reducer

145579089
6-5TRMTXS: RNCC: 3 | RNVC: 2
6-5TRMTXS: RNCC: 5 | RNVC: 9

29 Jul 2008

4730-14-372-3911
Bulkhead Hose Connector

143723911
2043-4-4S: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-530-9386
Tube Tee

145309386
EGOJIC: RNCC: 3 | RNVC: 2
00070348.0-008: RNCC: 5 | RNVC: 2

17 Jul 2002

4730-14-267-7739
Sediment Strainer Element

142677739
150657REP5-6: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-529-4257
Self-Sealing Coupling Half

145294257
RF5168-2-00: RNCC: 3 | RNVC: 2

29 Mar 2002

4730-14-561-8014
Tube Union

145618014
GE18LMEDOMDCF: RNCC: 3 | RNVC: 2
436956: RNCC: 5 | RNVC: 2
GE18LMEDOMDCF: RNCC: 5 | RNVC: 2
GE18LMEDOMDCF: RNCC: 5 | RNVC: 9

8 Sep 2009

4730-14-572-9577
Tube Elbow

145729577
WEE12SROMDCF: RNCC: 3 | RNVC: 2
437101: RNCC: 5 | RNVC: 2

30 Aug 2012

4730-14-576-2650
Pipe Reducer

145762650
7156: RNCC: 3 | RNVC: 2

10 Jun 2013

4730-14-328-5023
Bride A Raccord

143285023
GSM162-006F11: RNCC: 3 | RNVC: 2
000MA069REP28: RNCC: 5 | RNVC: 2
GSM162-06F11: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-225-7420
Demiraccord Debranc

142257420
D2604-2-137: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-281-3133
Raccord Souple

142813133
156420: RNCC: 3 | RNVC: 2
156420C: RNCC: 5 | RNVC: 2
650-485-089-0: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-389-4533
Tube Tee

143894533
365A53-1388-0001: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-287-8613
Tube To Boss Straight Adapter

142878613
531-40-01: RNCC: 3 | RNVC: 2
9001-10-21: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-501-2367
Tube To Boss Straight Adapter

145012367
471.163: RNCC: 3 | RNVC: 2
471-163: RNCC: 3 | RNVC: 2
F300 0T 025 2772: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-262-1773
Pipe Flange

142621773
7062DM1F1M121-7-14CD2-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-501-2170
Tube To Boss Straight Adapter

145012170
421-003: RNCC: 3 | RNVC: 2
421.003: RNCC: 3 | RNVC: 2
F300 0T 025 2575: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-504-1441
Tube To Boss Straight Adapter

145041441
8800-00-0212: RNCC: 3 | RNVC: 9

10 Feb 1998

4730-14-363-6766
Lubrication Fitting

143636766
NO PRIMARY REF14-363-6766: RNCC: 3 | RNVC: 2
18555B: RNCC: 5 | RNVC: 9

6 Jul 1980

4730-14-269-1889
Pipe Flange

142691889
7066CD1F30: RNCC: 2 | RNVC: 2
4730BB-30F: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-576-4928
Tube Tee

145764928
ABS2020-16: RNCC: 1 | RNVC: 2
ABS2020-16: RNCC: 3 | RNVC: 2
ABS2020-16: RNCC: 5 | RNVC: 2

20 Jun 2013

4730-14-462-1340
Manchette Inox

144621340
LN326-059-06-09DN8: RNCC: 3 | RNVC: 2
RAB0842: RNCC: 5 | RNVC: 2

6 Apr 1993

4730-14-441-0025
Fluid Passage Bolt

144410025
M1-48272: RNCC: 3 | RNVC: 2

9 Aug 1990

4730-14-393-1481
Tube To Boss Straight Adapter

143931481
BP3-14-15-21: RNCC: 3 | RNVC: 2

12 Apr 1984

4730-14-389-5649
Fluid Pressure Line Multiple Connector

143895649
39086019: RNCC: 3 | RNVC: 2
39086019: RNCC: 5 | RNVC: 9
A18AP0050-024: RNCC: 5 | RNVC: 9

20 Dec 1983

4730-14-338-2571
Graisseur Equerre

143382571
5012000-8X125: RNCC: 3 | RNVC: 2
ALG5012000-8X125: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-201-9331
Raccord Coude Orien

142019331
577-512-039-0: RNCC: 3 | RNVC: 2
85-686-8275: RNCC: 6 | RNVC: 9
577-512-039-0: RNCC: 8 | RNVC: 2

1 Jan 1962

4730-14-313-5227

4730-14-298-4332

4730-14-275-6961

4730-14-565-4334
Tube To Hose Straight Adapter

145654334
607GB254: RNCC: 3 | RNVC: 2
A231004000392: RNCC: 5 | RNVC: 2

18 Aug 2010

4730-14-247-3636

4730-14-365-2830

4730-14-367-7078

4730-14-458-0785
Union Pour Tube

4730-14-497-7487

4730-14-464-5398
Tuyau Collier

4730-14-460-0361

4730-14-462-0520

4730-14-476-7038
Tube To Boss Straight Adapter

144767038
101160601770: RNCC: 3 | RNVC: 2

28 Jun 1995

4730-14-373-8289
Rapid Action Coupled Pipe Cap

143738289
HTB50: RNCC: 3 | RNVC: 2

13 Nov 1981

4730-14-353-3514
Tube To Boss Straight Adapter

143533514
84884: RNCC: 3 | RNVC: 2
84884: RNCC: 5 | RNVC: 2

8 Dec 1978

4730-14-226-4023
Fluid Pressure Line Multiple Connector

142264023
760: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-276-4236
Tube Tee

142764236
R7632: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-381-8997
Tube To Boss Straight Adapter

143818997
A81362: RNCC: 3 | RNVC: 2

25 Jan 1983

4730-14-515-6104
Lubrication Fitting

145156104
JS112006: RNCC: 3 | RNVC: 2

21 Jul 1999

4730-14-529-7594
Reducing Tube Coupling Nut

145297594
MEASTRED01900: RNCC: 3 | RNVC: 2

10 Apr 2002

4730-14-304-7115

4730-14-424-3548
Bulkhead Hose Connector

144243548
3A12LCL: RNCC: 3 | RNVC: 2

19 May 1988

4730-14-430-7171
Bulkhead Hose Connector

144307171
PM1A743139001: RNCC: 3 | RNVC: 2
PM1A743139001: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-509-6759
Flange To Tube Straight Adapter

145096759
RA1M537304181: RNCC: 3 | RNVC: 2

28 Oct 1998

4730-14-504-6001
Tube Coupling Assembly

145046001
09930001: RNCC: 3 | RNVC: 2

25 Feb 1998

4730-14-378-9423
Tube To Boss Straight Adapter

143789423
233027: RNCC: 3 | RNVC: 2
MAF0001004838: RNCC: 6 | RNVC: 9

6 Sep 1982

4730-14-555-4597
Quick Disconnect Coupling Half

145554597
C1801 G13 04: RNCC: 3 | RNVC: 2

19 Nov 2007

4730-14-378-6614
Tube Tee

143786614
4730AB4.1DN25EQUIPE: RNCC: 2 | RNVC: 2
84042500: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-509-6750
Fluid Pressure Line Multiple Connector

145096750
RA1M534303261: RNCC: 3 | RNVC: 2

28 Oct 1998

4730-14-202-8458
Fluid Passage Bolt

142028458
0000350265: RNCC: 3 | RNVC: 2
0000350265: RNCC: 5 | RNVC: 9
350265: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-14-031-8863

4730-14-424-0941
Tube To Gas Fitting Straight Adapter

144240941
053-515-000: RNCC: 3 | RNVC: 2

11 May 1988

4730-14-445-2598
Tube To Hose Straight Adapter

144452598
60190810: RNCC: 3 | RNVC: 2
6019-08-10: RNCC: 5 | RNVC: 9

6 Feb 1991

4730-14-574-0686
Hose Clamp

145740686
TORRO35-50/9-C7W4: RNCC: 3 | RNVC: 2

4 Dec 2012

4730-14-387-8870
Tube Tee

143878870
723 B 08 10 10S: RNCC: 3 | RNVC: 2
P166B081010S: RNCC: 3 | RNVC: 2
723B08 10 10S: RNCC: 5 | RNVC: 2
723B08-10-10S: RNCC: 5 | RNVC: 2
723B081010S: RNCC: 5 | RNVC: 2
74723B081010S: RNCC: 5 | RNVC: 2
74723B081010S: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-344-5930
Tube Tee

143445930
5010650042: RNCC: 3 | RNVC: 2
NO PRIMARY REF14-344-5930: RNCC: 3 | RNVC: 2
N564-104: RNCC: 5 | RNVC: 2
0870568200: RNCC: 5 | RNVC: 2
76420: RNCC: 5 | RNVC: 9
0870568200: RNCC: 5 | RNVC: 9
76420: RNCC: 5 | RNVC: 9
DBA76420: RNCC: 5 | RNVC: 9
0870568200: RNCC: 6 | RNVC: 9

9 Sep 1977

4730-14-315-1515
Pipe Flange

143151515
M10-67-25: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-427-7574
Tube To Boss Straight Adapter

144277574
136-81-32002: RNCC: 3 | RNVC: 9
89402991: RNCC: 5 | RNVC: 2

9 Nov 1988

4730-14-212-1227
Pipe Flange

142121227
BN320-573-168-3F2-4: RNCC: 3 | RNVC: 2

5 Jul 1980

4730-14-423-4122
Pipe Flange

144234122
UA50088006PN50-11C1DN100: RNCC: 2 | RNVC: 2
4730HCPN50DN10011C1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-273-5050
Tube Coupling

142735050
7062BA1RPET2-36C337A: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-378-0469
Pipe Flange

143780469
NO PRIMARY REF14-378-0469: RNCC: 3 | RNVC: 2
53441070: RNCC: 5 | RNVC: 9

20 Jul 1982

4730-14-346-7114
Pipe Flange

143467114
6784-1EA63A: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-432-4725
Pipe Flange

144324725
BN329-506D2DN250: RNCC: 3 | RNVC: 2

14 Jun 1989

4730-14-363-4804
Tube Tee

143634804
NO PRIMARY REF14-363-4804: RNCC: 3 | RNVC: 2
EVT16S: RNCC: 5 | RNVC: 2
149618202: RNCC: 5 | RNVC: 2
149618202: RNCC: 5 | RNVC: 2
EVT16S: RNCC: 5 | RNVC: 9

9 May 1980

4730-14-395-3745
Obturateur

143953745
N0117F51A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-402-1680
Bulkhead Hose Connector

144021680
DA2C203527510: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-408-2376
Equipe Raccord

144082376
TCPV134012: RNCC: 3 | RNVC: 2

19 Mar 1986

4730-14-542-9841
Tube Coupling

145429841
22208/A: RNCC: 3 | RNVC: 2

18 Aug 2004

4730-14-462-1335
Manchette Inox

144621335
LN326-059-06-01DN6: RNCC: 3 | RNVC: 2
RAB0837: RNCC: 5 | RNVC: 2

6 Apr 1993

4730-14-571-3056
Sediment Strainer Element

145713056
710076-011: RNCC: 3 | RNVC: 2

12 Mar 2012

4730-14-549-6327
Tube Union

145496327
PE66001E08: RNCC: 3 | RNVC: 2

24 Apr 2006

4730-14-478-4894
Self-Sealing Coupling Assembly

144784894
C 1800 G27 12: RNCC: 3 | RNVC: 2
5800-G27-12: RNCC: 5 | RNVC: 9

8 Nov 1995

4730-14-435-9625
Bulkhead Hose Connector

144359625
332A22-1192-00: RNCC: 3 | RNVC: 2

29 Nov 1989

4730-14-379-5577
Hose Coupling Assembly

143795577
3605-24E: RNCC: 3 | RNVC: 2

1 Oct 1982

4730-14-350-1520
Tube To Boss Straight Adapter

143501520
RT21821: RNCC: 3 | RNVC: 2
85-689-4861: RNCC: 6 | RNVC: 9

30 Jul 1997

4730-14-253-6149
Raccord Droit De Bo

142536149
NO PRIMARY REF14-253-6149: RNCC: 3 | RNVC: 2
352076: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-368-2148
Tube To Boss Straight Adapter

143682148
Z08297-01: RNCC: 3 | RNVC: 2
Z08297-01: RNCC: 5 | RNVC: 2
301214: RNCC: 5 | RNVC: 2

20 Feb 1981

4730-14-467-5695
Tube To Boss Straight Adapter

144675695
312-05262-001: RNCC: 3 | RNVC: 2

19 Jan 1994

4730-14-445-8957
Tube-Hose Fitting Compression Sleeve

144458957
19RA12-08: RNCC: 3 | RNVC: 9
91630362: RNCC: 5 | RNVC: 2

27 Feb 1991

4730-14-505-3132
Swivel Flange To Hose Elbow

145053132
EW12-PLM-ED-0MD: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-463-5000
Flange To Grooved Clamp Straight Adapter

144635000
EFL50-02: RNCC: 3 | RNVC: 2

17 Jun 1993

4730-14-295-7439
Fluid Pressure Line Multiple Connector

142957439
R13116: RNCC: 3 | RNVC: 2
84424-16: RNCC: 5 | RNVC: 2
RA13116: RNCC: 5 | RNVC: 2
84424-16: RNCC: 5 | RNVC: 2
91319975: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-459-6793
Fluid Pressure Line Multiple Connector

144596793
A10112-02-0000P006: RNCC: 3 | RNVC: 2

10 Dec 1992

4730-14-269-1915
Pipe Flange

142691915
7066CE1M30: RNCC: 2 | RNVC: 2
4730BC-30M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-365-6977
Tube Tee

143656977
4809L8-12X100: RNCC: 3 | RNVC: 2

8 Oct 1980

4730-14-306-4029
Fluid Pressure Line Multiple Connector

143064029
F751-002: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-467-7439
Tube To Boss Straight Adapter

144677439
312-15816-001: RNCC: 3 | RNVC: 2

27 Jan 1994

4730-14-277-6211
Tube To Boss Straight Adapter

142776211
7062BB1B1966RCET2-14UA9: RNCC: 4 | RNVC: 1

1 Jan 1971

4730-14-338-8199
Fluid Passage Bolt

143388199
510-070-08: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-398-5850
Tube Tee

143985850
GSM164-052F6: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-446-8315
Tube Tee

144468315
353-916-20701CACD: RNCC: 3 | RNVC: 2

17 Apr 1991

4730-14-381-1870
Pipe Flange

143811870
2501030: RNCC: 3 | RNVC: 2
830725: RNCC: 5 | RNVC: 2
H08370-92: RNCC: 5 | RNVC: 2
895703: RNCC: 5 | RNVC: 9

25 Jan 1983

4730-14-359-5856
Tube To Boss Straight Adapter

143595856
42-22-26X150NU: RNCC: 3 | RNVC: 2
4A22L26X150: RNCC: 3 | RNVC: 2
5000182139: RNCC: 5 | RNVC: 2
5000182139: RNCC: 5 | RNVC: 9
5000182139: RNCC: 6 | RNVC: 9

15 Oct 1979

4730-14-268-8862
Tube To Boss Straight Adapter

142688862
631X4104: RNCC: 3 | RNVC: 2
U1-6B631X4104: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-457-9157
Quick Disconnect Coupling Half

144579157
0610902: RNCC: 3 | RNVC: 2
1204.519: RNCC: 3 | RNVC: 2
1204-519: RNCC: 5 | RNVC: 2

30 Sep 1992

4730-14-403-4368
Tube To Hose Straight Adapter

144034368
01650608: RNCC: 3 | RNVC: 2
1650608: RNCC: 5 | RNVC: 2
SBE4-3: RNCC: 5 | RNVC: 2
427134: RNCC: 5 | RNVC: 2

21 Aug 1985

4730-14-268-6658
Demi-Raccord Demont

142686658
1317-6-70: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-461-6890
Lubrication Fitting

144616890
15007: RNCC: 3 | RNVC: 2
1028823P00: RNCC: 5 | RNVC: 2

22 Mar 1993

4730-14-500-1426
Tube To Boss Straight Adapter

145001426
1725394M1: RNCC: 3 | RNVC: 2
F300 0T 024 1439: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-479-9324
Tube Coupling

144799324
451112: RNCC: 3 | RNVC: 2

14 Feb 1996

4730-14-470-2331
Lubrication Fitting

144702331
5000816109: RNCC: 3 | RNVC: 2
89233033: RNCC: 5 | RNVC: 2

8 Jun 1994

4730-14-331-1965
Quick Disconnect Coupling Half

143311965
461800-11: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-449-7826
Steam Trap Parts Kit

144497826
HM34CFLOTTEUREDN1/2": RNCC: 3 | RNVC: 2

10 Sep 1991

4730-14-464-9625
Fluid Flow Restrictor Unit

144649625
365A52-5025-20: RNCC: 3 | RNVC: 2

8 Sep 1993

4730-14-345-4158

4730-14-367-7900

4730-14-407-1979
Haute Press Bouchon

144071979
MB700060: RNCC: 3 | RNVC: 2
MB700060: RNCC: 5 | RNVC: 2
474371V: RNCC: 5 | RNVC: 2
MB700-600: RNCC: 5 | RNVC: 2

12 Feb 1986

4730-14-490-3019
Special-Shaped Hose Clamp

144903019
J05085-04-0100P050: RNCC: 3 | RNVC: 2

24 Sep 1997

4730-14-367-5742
Tube To Boss Straight Adapter

143675742
FKBE33X2X18B: RNCC: 3 | RNVC: 2
T07297-15: RNCC: 5 | RNVC: 2

19 Jan 1981

4730-14-362-1137
Tube Tee

143621137
GSM164-025F14: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-485-7962
Flange To Boss Elbow

144857962
431609: RNCC: 3 | RNVC: 2
431609-001: RNCC: 5 | RNVC: 9

12 Feb 1997

4730-14-412-3436
Pipeline Flexible Spacer

144123436
4280-107-220-4CS12AX: RNCC: 3 | RNVC: 2
4280-107-4CS12AX: RNCC: 5 | RNVC: 2

8 Oct 1986

4730-14-487-5754
Sediment Strainer Element

144875754
451345A-T2510-P11/P21: RNCC: 3 | RNVC: 2
451345A: RNCC: 5 | RNVC: 2
451345A-NU35: RNCC: 5 | RNVC: 2

10 Apr 1997

4730-14-240-4750

4730-14-216-1603
Bouchon Filete Spec

142161603
A73008: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-361-3722

4730-14-333-3402

4730-14-367-9888
Manchon De Purge

143679888
R35070SMREP26-27-3: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-207-0025
Raccord Orientable

142070025
NO PRIMARY REF14-207-0025: RNCC: 3 | RNVC: 2
3454-1: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-458-5938
Appareil Deprimogen

144585938
065-30-9029: RNCC: 3 | RNVC: 2

28 Oct 1992

4730-14-238-9266

4730-14-031-7814

4730-14-458-3649
Embout Raccord Tour

144583649
1980-900-14: RNCC: 3 | RNVC: 2

20 Oct 1992

4730-14-408-9521
Tube To Boss Straight Adapter

144089521
R3220-27X150Z22: RNCC: 3 | RNVC: 2

9 Apr 1986

4730-14-471-3462
Tube To Boss Straight Adapter

144713462
128-08J: RNCC: 3 | RNVC: 2

24 Aug 1994

4730-14-413-3697
Pipeline Flexible Spacer

144133697
ERV-DN80: RNCC: 3 | RNVC: 2

4 Dec 1986

4730-14-315-1508
Flange To Tube Straight Adapter

143151508
M10-72-38: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-432-2996
Bulkhead Hose Connector

144322996
A2H25899-10-79518: RNCC: 3 | RNVC: 2
NH25916R10: RNCC: 3 | RNVC: 2

2 Jun 1989

4730-14-490-5786
Fluid Passage Bolt

144905786
SIMMAA1001000F5B-REP7: RNCC: 3 | RNVC: 2

2 Oct 1997

4730-14-344-7447
Pipe Flange

143447447
EA1M886-005: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-487-1052
Pipeline Flexible Spacer

144871052
I131NTH150PN16AVEC-CERCEAU-RAID: RNCC: 2 | RNVC: 2
DILNTH150PN16AVEC-CERCEAU-DIA20: RNCC: 3 | RNVC: 2

9 Apr 1997

4730-14-500-8046
Tube Tee

145008046
XT18LA3C: RNCC: 3 | RNVC: 2
XT18-LA3C: RNCC: 3 | RNVC: 2
F300 0T 024 8246: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-421-5756
Tube To Boss Straight Adapter

144215756
LL127-CS1406S: RNCC: 3 | RNVC: 2

19 Jan 1988

4730-14-328-9565
Tube Tee

143289565
TRK20X14X10NNU: RNCC: 3 | RNVC: 2
Q1-5TR20X14X10NNNU: RNCC: 3 | RNVC: 2
10RCA20X14X10NU: RNCC: 3 | RNVC: 2
GSM164-012F17: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-424-5531
Quick Disconnect Coupling Half

144245531
RBE11-6819: RNCC: 3 | RNVC: 2

27 May 1988

4730-14-452-0747
Hydraulic System Accessories Manifold

144520747
88-01-015-37: RNCC: 3 | RNVC: 9

18 Dec 1991

4730-14-344-6984
Bulkhead Hose Connector

143446984
EA1M713-002: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-343-0868
Tube To Boss Straight Adapter

143430868
NO PRIMARY REF14-343-0868: RNCC: 3 | RNVC: 2
13231610: RNCC: 5 | RNVC: 9

16 Jun 1977

4730-14-389-3919
Quick Disconnect Coupling Half

143893919
K07-63-206: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-452-0659
Flange To Hose Straight Adapter

144520659
D53607-2: RNCC: 3 | RNVC: 2
D53607-2: RNCC: 5 | RNVC: 2

18 Dec 1991

4730-14-269-1872
Pipe Flange

142691872
7066CD1M101-6: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-514-1606
Tube Fitting Locknut

145141606
11151-5789-0: RNCC: 3 | RNVC: 2

28 Apr 1999

4730-14-450-5458
Tube To Boss Straight Adapter

144505458
F40XS38-1,1/2: RNCC: 3 | RNVC: 2
91712749: RNCC: 5 | RNVC: 2

9 Oct 1991

4730-14-534-6956
Air Hose Connector

145346956
27171241-0: RNCC: 3 | RNVC: 2
27171241-0: RNCC: 5 | RNVC: 2

2 Apr 2003

4730-14-449-4460
Tube To Hose Straight Adapter

144494460
19244: RNCC: 3 | RNVC: 2

19 Aug 1991

4730-14-458-8620
Tube Coupling

144588620
221764: RNCC: 3 | RNVC: 2
80X2428A024: RNCC: 5 | RNVC: 2

5 Nov 1992

4730-14-493-0764
Tube To Boss Straight Adapter

144930764
3099T: RNCC: 3 | RNVC: 2
F300 0T 009 9197: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-511-1968
Fluid Flow Restrictor

145111968
D64684: RNCC: 3 | RNVC: 2

9 Dec 1998

4730-14-526-2116
Self-Sealing Coupling Assembly

145262116
HA04A04NJ9: RNCC: 3 | RNVC: 2

11 Jul 2001

4730-14-430-9061
Tube Fitting Flared Sleeve

144309061
DR12: RNCC: 3 | RNVC: 2
6503945L: RNCC: 5 | RNVC: 2
120400120: RNCC: 5 | RNVC: 2
91638200: RNCC: 5 | RNVC: 2
5005030731: RNCC: 5 | RNVC: 2

29 Mar 1989

4730-14-336-0164
Tube Raccord Rapide

143360164
83646: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-253-7887
Tube Preforme De 25

142537887
B078CBDBRANGEE8: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-563-9364
Tube Coupling Assembly

145639364
S212A1011103: RNCC: 3 | RNVC: 2

29 Mar 2010

4730-14-210-1129
Flasque De Blocage

142101129
725555: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-577-2526
Hose To Boss Straight Adapter

145772526
E83102910003: RNCC: 3 | RNVC: 2

28 Aug 2013

4730-14-568-9598
Tube Elbow

145689598
CLS4515: RNCC: 3 | RNVC: 2

22 Jul 2011

4730-14-432-4710
Pipe Flange

144324710
BN329-506D2DN100: RNCC: 3 | RNVC: 2

14 Jun 1989

4730-14-413-9288
Tube Tee

144139288
121032NU: RNCC: 3 | RNVC: 2
1509-10-14X150NU: RNCC: 3 | RNVC: 2
C0RSA10X14-150NNU: RNCC: 3 | RNVC: 2
75A10-14-150NU: RNCC: 3 | RNVC: 2
121032NU: RNCC: 6 | RNVC: 9

22 Jan 1987

4730-14-369-0256
Tube To Boss Straight Adapter

143690256
102173502: RNCC: 3 | RNVC: 2
0139-111: RNCC: 5 | RNVC: 2
102173502: RNCC: 5 | RNVC: 2
F300 0T 001 8685: RNCC: 6 | RNVC: 9

17 Apr 1981

4730-14-224-7746
Fluid Pressure Line Multiple Connector

142247746
3160S73-44-227: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-424-3442
Tube To Boss Straight Adapter

144243442
P4-1204-18-22X150: RNCC: 3 | RNVC: 2

19 May 1988

4730-14-320-2089
Embout Pour Tuyau

143202089
NO PRIMARY REF14-320-2089: RNCC: 3 | RNVC: 2
308100R1EMB0UT: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-208-5555

4730-14-040-0177
Bloc Repartition

140400177
0249927060: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-330-9796

4730-14-339-8952

4730-14-371-6622

4730-14-449-5422
Tube-Hose Fitting Compression Sleeve

144495422
EMBOUT A SOUDER BB S10,2: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-423-4282
Fluid Passage Bolt

144234282
9001-015G: RNCC: 3 | RNVC: 9
7701030598: RNCC: 5 | RNVC: 2
8090707: RNCC: 5 | RNVC: 2
7701025886: RNCC: 5 | RNVC: 9
ROT9001-015G: RNCC: 5 | RNVC: 9

19 Apr 1988

4730-14-520-4267
Tube To Boss Straight Adapter

145204267
D04BB1370-050: RNCC: 3 | RNVC: 2
D04BB1370-050: RNCC: 5 | RNVC: 2

17 May 2000

4730-14-505-9920
Hose To Gas Fitting Straight Adapter

145059920
281220142: RNCC: 3 | RNVC: 9
A05050610: RNCC: 5 | RNVC: 2
A05050610: RNCC: 5 | RNVC: 9
ADAPM22X150F16X150: RNCC: 5 | RNVC: 9
M22X150-F16X150: RNCC: 5 | RNVC: 9
F300 0T 020 4908: RNCC: 6 | RNVC: 9

2 Apr 1998

4730-14-304-0360
Tube To Boss Straight Adapter

143040360
7062BA1VCT1-20UE10Z1: RNCC: 2 | RNVC: 2

1 Jan 1974

4730-14-362-8061

4730-14-558-9654
Tube Coupling

145589654
20416: RNCC: 3 | RNVC: 2

25 Nov 2008

4730-14-269-2070
Pipe Flange

142692070
7066EE1F25: RNCC: 2 | RNVC: 2
4730BJ-25F: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-370-8880
Tube To Boss Straight Adapter

143708880
702A30-0960-20: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-369-9768
Pipe Flange

143699768
100954: RNCC: 3 | RNVC: 2
209517: RNCC: 5 | RNVC: 2
F18377-74: RNCC: 5 | RNVC: 2
F18377-74: RNCC: 5 | RNVC: 2

18 May 1981

4730-14-323-4986
Tube To Boss Straight Adapter

143234986
NO PRIMARY REF14-323-4986: RNCC: 3 | RNVC: 2
99591078: RNCC: 5 | RNVC: 2
A22-10-18X150: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-390-0790
Self-Sealing Coupling Half

143900790
NO PRIMARY REF14-390-0790: RNCC: 3 | RNVC: 2
4630104: RNCC: 5 | RNVC: 9

26 Jan 1984

4730-14-285-1937
Tube To Boss Straight Adapter

142851937
262-10-78118-01: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-487-0628
Filler Cap Adapter Assembly

144870628
A03037-10-8000P021: RNCC: 3 | RNVC: 2

2 Apr 1997

4730-14-443-4633
Tube To Boss Straight Adapter

144434633
2-150041-1C: RNCC: 3 | RNVC: 2
2-150041-1C: RNCC: 5 | RNVC: 9

23 Nov 1990

4730-14-370-6646
Tube Fitting Flared Sleeve

143706646
1099007: RNCC: 3 | RNVC: 2
TS2154-8: RNCC: 5 | RNVC: 2

5 Jun 1981

4730-14-475-7948
Flange To Tube Straight Adapter

144757948
88920-1: RNCC: 3 | RNVC: 2

3 May 1995

4730-14-426-7389
Tube Tee

144267389
4730HEEG139,7X6,3: RNCC: 2 | RNVC: 2

20 Sep 1988

4730-14-445-3016
Quick Disconnect Coupling Half

144453016
RBE08.2101.ICODJVVD-4,5: RNCC: 3 | RNVC: 2

8 Feb 1991

4730-14-569-0204
Bulkhead Hose Connector

145690204
57529051: RNCC: 3 | RNVC: 2
91916521: RNCC: 5 | RNVC: 2

29 Jul 2011

4730-14-573-4634
Pipeline Flexible Spacer

145734634
441102008DH-FREMM: RNCC: 3 | RNVC: 2

15 Oct 2012

4730-14-524-7098
Tuyau Collier

4730-14-365-3018

4730-14-218-7516

4730-14-531-7471
Tube Fitting Clinch Sleeve

145317471
20-52-129: RNCC: 3 | RNVC: 2
4071B31REP35-1: RNCC: 5 | RNVC: 2

12 Sep 2002

4730-14-405-8257
Tube To Boss Straight Adapter

144058257
FBRAB6-1/8: RNCC: 3 | RNVC: 2
FBRAB6-1/8: RNCC: 3 | RNVC: 2

4 Dec 1985

4730-14-243-1821

4730-14-575-0989
Tube Tee

145750989
82478056000: RNCC: 3 | RNVC: 1

13 Mar 2013

4730-14-274-8411
Bride Fixat Culasse

142748411
NO PRIMARY REF14-274-8411: RNCC: 3 | RNVC: 2
31K115: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-495-6094
Union

144956094
E48375-71: RNCC: 3 | RNVC: 2
F300 0T 019 5366: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-427-0320
Pipe Flange

144270320
MAT162-0022DN50MALE: RNCC: 3 | RNVC: 2
MAT162-0022F7: RNCC: 3 | RNVC: 2

5 Oct 1988

4730-14-454-9652
Quick Disconnect Coupling Assembly

144549652
H6-63+H6-62: RNCC: 3 | RNVC: 2
H6-63+H6-62: RNCC: 3 | RNVC: 9
H6-63+H6-66: RNCC: 5 | RNVC: 9

30 Apr 1992

4730-14-260-9138
Pipe Flange

142609138
7062CB1F1-191AF42-2: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-434-3417
Reglage Poussoir

144343417
5003-002-0: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-427-0325
Pipe Flange

144270325
MAT162-0022DN65MALE: RNCC: 3 | RNVC: 2
MAT162-0022F9: RNCC: 3 | RNVC: 2

5 Oct 1988

4730-14-389-2778
Quick Disconnect Coupling Half

143892778
313-16: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-478-3864
Tube Tee

144783864
520.2333-1L: RNCC: 3 | RNVC: 2

26 Oct 1995

4730-14-355-5643

4730-14-293-3403

4730-14-234-8778
Bouchon Arriere

142348778
201263: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-311-5036

4730-14-288-4154
Corps Sur Clapet

142884154
0206990300: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-349-0401
Fluid Pressure Line Multiple Connector

143490401
109-20-21-27: RNCC: 3 | RNVC: 2
13A20-21X27: RNCC: 3 | RNVC: 2

19 Apr 1978

4730-14-315-1513
Bulkhead Hose Connector

143151513
M10-75-14TUBECUIVRE: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-273-5121
Tube To Boss Straight Adapter

142735121
7062BB1RCET2-25UA9: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-337-3416
Sediment Strainer Element

143373416
EA1M211-53-835: RNCC: 3 | RNVC: 2

7 Oct 1976

4730-14-273-5042
Tube To Boss Straight Adapter

142735042
7062BA1RCET2-30C337A: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-236-8653
Tube To Boss Straight Adapter

142368653
321A75-0813-20: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-325-4611
Swivel Retaining Pipe Flange

143254611
RUAN7516-70: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-296-9223
Fluid Pressure Line Multiple Connector

142969223
73-063-27: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-552-1131
Straight Tubing Connector

145521131
0249922500: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-311-9322
Fluid Passage Bolt

143119322
10308662: RNCC: 3 | RNVC: 2
10308662: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-263-0841
Raccord Union Major

142630841
MAS3 1-2: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-423-4779
Pipe Flange

144234779
UA50088006PN150-11LSFDN20: RNCC: 2 | RNVC: 2
4730HCPN150DN02011LSF: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-556-6547
Hose Coupling

145566547
4A8/16X150 OR NU: RNCC: 3 | RNVC: 2
82176111: RNCC: 3 | RNVC: 9
7420858719: RNCC: 5 | RNVC: 2
7420858719: RNCC: 6 | RNVC: 9

31 Mar 2008

4730-14-262-1519

4730-14-268-7047

4730-14-524-6639
Bulkhead Hose Connector

145246639
504629: RNCC: 3 | RNVC: 2

3 Apr 2001

4730-14-553-1298
Fluid Pressure Line Multiple Connector

145531298
13DL018-22X150Z: RNCC: 3 | RNVC: 2
434522: RNCC: 5 | RNVC: 2

5 Mar 2007

4730-14-555-5336
Tube Tee

145555336
1521511: RNCC: 3 | RNVC: 2

23 Nov 2007

4730-14-376-4644
Tube To Boss Straight Adapter

143764644
16559164: RNCC: 3 | RNVC: 2
16559164: RNCC: 5 | RNVC: 9
16559164: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-485-4293
Quick Disconnect Reducer

144854293
10018760: RNCC: 3 | RNVC: 2

23 Jan 1997

4730-14-472-4182
Quick Disconnect Coupling Half

144724182
26000517: RNCC: 3 | RNVC: 2

20 Oct 1994

4730-14-438-0006
Tube Tee

144380006
11RA12L16X150CODL6: RNCC: 3 | RNVC: 2
1483381009: RNCC: 5 | RNVC: 2
811L30611: RNCC: 5 | RNVC: 2

5 Mar 1990

4730-14-218-3000
Tube Nipple

142183000
365: RNCC: 3 | RNVC: 2
30125: RNCC: 5 | RNVC: 2
0024325051: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-399-9263
Quick Disconnect Coupling Half

143999263
13.325.57: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-392-7341
Quick Disconnect Coupling Assembly

143927341
5378002: RNCC: 3 | RNVC: 2
FOE5378002: RNCC: 5 | RNVC: 9

7 Apr 1984

4730-14-289-1594

4730-14-233-0575

4730-14-296-1115

4730-14-561-8065
Tube Reducer

145618065
RED28/22LCF: RNCC: 3 | RNVC: 2
RED28/22LCF: RNCC: 5 | RNVC: 9

8 Sep 2009

4730-14-402-1887
Tube To Boss Straight Adapter

144021887
FTXS38-1-1-2: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-385-7094
Tube To Boss Straight Adapter

143857094
243GCU12 3-8: RNCC: 3 | RNVC: 2
243GC12 3-8: RNCC: 3 | RNVC: 9

26 Jul 1983

4730-14-450-6147
Pipe To Tube Straight Adapter

144506147
6-133-M4-NPT-SS: RNCC: 3 | RNVC: 9
UMSI6 1/4: RNCC: 5 | RNVC: 2

15 Oct 1991

4730-14-451-0436
Fluid Passage Bolt

144510436
99631144107: RNCC: 3 | RNVC: 2
24048002400: RNCC: 5 | RNVC: 2
59563212: RNCC: 5 | RNVC: 2
99-631-144-104: RNCC: 5 | RNVC: 2
48J24: RNCC: 5 | RNVC: 9
99631144104: RNCC: 5 | RNVC: 9

28 Oct 1991

4730-14-330-5994
Self-Sealing Coupling Assembly

143305994
AQ8M12N: RNCC: 3 | RNVC: 2
613-989-596-0: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-558-8665
Swivel Retaining Pipe Flange

145588665
G74446-12: RNCC: 3 | RNVC: 2

18 Nov 2008

4730-14-453-3660
Tube Union

144533660
355A76-6073-32: RNCC: 3 | RNVC: 2

19 Feb 1992

4730-14-265-1191
Tube To Boss Straight Adapter

142651191
702A30-0605-20: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-516-5471
Tube Coupling

145165471
NO PRIMARY REF14-516-5471: RNCC: 3 | RNVC: 2
9242316: RNCC: 5 | RNVC: 9

4 Oct 1999

4730-14-267-1536
Tube Tee

142671536
NO PRIMARY REF14-267-1536: RNCC: 3 | RNVC: 2
619903A: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-368-1093
Bulkhead Hose Connector

143681093
RBE3-29040DIC: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-424-5744
Tube Coupling

144245744
0807524-09: RNCC: 3 | RNVC: 9
32249-10: RNCC: 5 | RNVC: 2

1 Jun 1988

4730-14-556-7031
Hose To Boss Straight Adapter

145567031
GA47722: RNCC: 3 | RNVC: 2

3 Apr 2008

4730-14-321-7390

4730-14-438-0010
Tube To Boss Straight Adapter

144380010
4A20-27X200NU: RNCC: 3 | RNVC: 2
204104403: RNCC: 5 | RNVC: 2
5005030902: RNCC: 5 | RNVC: 2

5 Mar 1990

4730-14-501-2363
Tube To Boss Straight Adapter

145012363
471-109: RNCC: 3 | RNVC: 2
471.109: RNCC: 3 | RNVC: 2
F300 0T 025 2768: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-418-6538
Pipe Flange

144186538
E29203-01B-PN16DN300BF42N: RNCC: 2 | RNVC: 2
MEC10719: RNCC: 3 | RNVC: 2
4730CJ-DN300: RNCC: 5 | RNVC: 2

9 Sep 1987

4730-14-431-2542
Tube-Hose Fitting Compression Sleeve

144312542
0.10.0.5: RNCC: 3 | RNVC: 2
DHS613-263-16: RNCC: 5 | RNVC: 2
0-10-05: RNCC: 5 | RNVC: 2

12 Apr 1989

4730-14-339-0941
Raccordement Bride

143390941
GSM162-010F10: RNCC: 3 | RNVC: 2
GSM162-10F10: RNCC: 5 | RNVC: 2

17 Dec 1976

4730-14-417-4886
Echangeur Raccord

144174886
12-841157-105: RNCC: 3 | RNVC: 2
34937: RNCC: 5 | RNVC: 9

8 Jul 1987

4730-14-577-4953
Hose Tee

145774953
3604 06 00: RNCC: 3 | RNVC: 2

19 Sep 2013

4730-14-365-9407

4730-14-345-4777

4730-14-275-6858

4730-14-431-3953
Raccord De Refoulem

144313953
DFE101020: RNCC: 3 | RNVC: 2
2413371126: RNCC: 3 | RNVC: 2
RAR1414: RNCC: 5 | RNVC: 2
DFE101838: RNCC: 5 | RNVC: 9

17 Apr 1989

4730-14-330-0678
Fluid Passage Bolt

143300678
25223M: RNCC: 3 | RNVC: 2
85-687-4672: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-462-0245
Quick Disconnect Coupling Half

144620245
A72815-15: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-473-7951
Threaded Tube Fitting Plug

144737951
082309-00200: RNCC: 3 | RNVC: 2

11 Jan 1995

4730-14-283-7728
Raccord Deux Pieces

142837728
NO PRIMARY REF14-283-7728: RNCC: 3 | RNVC: 2
0549-01-15X21: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-520-2604
Tube To Boss Straight Adapter

145202604
203039: RNCC: 3 | RNVC: 2

17 May 2000

4730-14-402-0087
Tube To Boss Straight Adapter

144020087
270471: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-554-5933
Flange To Tube Elbow

145545933
0000371360: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-436-8420
Tube To Boss Straight Adapter

144368420
DA2C500051320: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-409-7350
Fluid Filter Element

144097350
233381: RNCC: 3 | RNVC: 2
233381: RNCC: 5 | RNVC: 9

28 May 1986

4730-14-276-0315
Tube-Hose Fitting Compression Sleeve

142760315
11216290V: RNCC: 3 | RNVC: 2
21629: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-411-5431
Coude

144115431
520052: RNCC: 3 | RNVC: 2

20 Aug 1986

4730-14-455-6902
Tube To Hose Straight Adapter

144556902
MAT166-0001T-F16REP2: RNCC: 3 | RNVC: 2

11 Jun 1992

4730-14-565-3172
Quick Disconnect Reducer

145653172
5005330071: RNCC: 1 | RNVC: 2
3166-08-10: RNCC: 3 | RNVC: 2
25584763: RNCC: 5 | RNVC: 2

9 Aug 2010

4730-14-423-4636
Pipe Flange

144234636
UA50088006PN420-11D1SDN40: RNCC: 2 | RNVC: 2
4730HCPN420DN04011D1S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-542-0236
Sediment Strainer Element

145420236
20049-789: RNCC: 3 | RNVC: 2
502103005028A: RNCC: 3 | RNVC: 9

2 Jul 2004

4730-14-454-9647
Pipe Flange

144549647
LN327-018F3REP5: RNCC: 3 | RNVC: 2

30 Apr 1992

4730-14-404-6742
Tube Coupling

144046742
80009-10: RNCC: 3 | RNVC: 9

20 Nov 1985

4730-14-430-1671
Quick Disconnect Coupling Half

144301671
RBE06-7101/IC: RNCC: 3 | RNVC: 2

8 Mar 1989

4730-14-444-8820
Quick Disconnect Coupling Half

144448820
RBA06-6810: RNCC: 3 | RNVC: 2

28 Jan 1991

4730-14-571-5970
Tube To Boss Tee

145715970
FR-98641000194: RNCC: 3 | RNVC: 2
98641000194: RNCC: 5 | RNVC: 2

12 Apr 2012

4730-14-577-1333
Pipe Tee

145771333
ASNA3752-080608: RNCC: 1 | RNVC: 2
ASNA3752-080608: RNCC: 3 | RNVC: 2
ASNA3752-080608: RNCC: 5 | RNVC: 2

13 Aug 2013

4730-14-563-8036
Tube Fitting Clinch Sleeve

145638036
7772: RNCC: 3 | RNVC: 2

17 Mar 2010

4730-14-521-9554
Tube Union

145219554
460691G: RNCC: 3 | RNVC: 2

27 Sep 2000

4730-14-308-4843

4730-14-326-9066

4730-14-327-6102

4730-14-217-3548
Raccord Partie Mobi

142173548
460017M1: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-240-7116
Manchette Coudee A

142407116
NG410-45-41-5X153: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-348-3764
Raccord Embout

143483764
3160S78-01-017: RNCC: 3 | RNVC: 2
85-800-6321: RNCC: 6 | RNVC: 9

29 Mar 1978

4730-14-575-6557
Tube Tee

145756557
TE-Q00008-00: RNCC: 3 | RNVC: 2

22 Apr 2013

4730-14-394-1514
Barillet Deux Ecrou

143941514
LN326-010F9/11+2ECROUS: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-207-2654
Raccord Droit Speci

142072654
3160S69-10-012: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-358-9217

4730-14-551-6459
Branched Tubing Connector

145516459
13404370-501: RNCC: 3 | RNVC: 2
13404370-501: RNCC: 5 | RNVC: 2

11 Oct 2006

4730-14-456-6472
Tube Tee

144566472
LN326064F8REP8: RNCC: 3 | RNVC: 2

16 Jul 1992

4730-14-376-1491
Tube-Hose Fitting Compression Sleeve

143761491
LL023-NS16S: RNCC: 3 | RNVC: 2
84241602: RNCC: 5 | RNVC: 2

30 Mar 1982

4730-14-402-4308
Quick Disconnect Coupling Half

144024308
16702766: RNCC: 3 | RNVC: 2
96083416: RNCC: 5 | RNVC: 2

3 Jul 1985

4730-14-343-7295

4730-14-376-3549
Pipe Flange

143763549
065-30-9013PL2DN100: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-205-0432
Raccord Vabco

142050432
EMA44-5-1 1-2: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-516-5470
Hose Fitting Swaging Socket

145165470
21 010 L 06: RNCC: 3 | RNVC: 2

4 Oct 1999

4730-14-541-4061
Quick Disconnect Coupling Half

145414061
RBE 06.7101-IC-SP: RNCC: 3 | RNVC: 2
RBE06.7101/IC/SP: RNCC: 3 | RNVC: 2
18566371-8: RNCC: 5 | RNVC: 2

8 Jun 2004

4730-14-300-4953
Hose Coupling Assembly

143004953
9952135: RNCC: 3 | RNVC: 2
9952135A: RNCC: 3 | RNVC: 2
9920001: RNCC: 5 | RNVC: 2
9-92-00-01: RNCC: 5 | RNVC: 9
9-95-21-35A: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-436-4786
Fluid Pressure Line Multiple Connector

144364786
350A75-2000-00: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-508-0151
Tube Coupling

145080151
1911060201: RNCC: 3 | RNVC: 2
240CU36-22FF: RNCC: 5 | RNVC: 9
240CU36-22FF: RNCC: 5 | RNVC: 9

26 Aug 1998

4730-14-418-6531
Pipe Flange

144186531
E29203-01B-PN16DN100BF42N: RNCC: 2 | RNVC: 2
MEC10336: RNCC: 3 | RNVC: 2
4730CJ-DN100: RNCC: 5 | RNVC: 2

9 Sep 1987

4730-14-513-2918
Tube-Hose Adapter Body

145132918
NO PRIMARY REF14-513-2918: RNCC: 3 | RNVC: 2
NNP 4730864533057: RNCC: 5 | RNVC: 9

10 Mar 1999

4730-14-222-7280
Tube Tee

142227280
GSM1297FE3-11TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-387-8487
Tube To Boss Straight Adapter

143878487
NO PRIMARY REF14-387-8487: RNCC: 3 | RNVC: 2
0026-116DN25: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-423-3944
Pipe Flange

144233944
UA50088006PN20-12C2DN400: RNCC: 2 | RNVC: 2
4730HBPN20DN40012C2: RNCC: 5 | RNVC: 2

16 Apr 1988

4730-14-338-2562
Graisseur Allonge

143382562
5011100-8X125: RNCC: 3 | RNVC: 2
ALG5011100-8X125: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-367-0366

4730-14-367-0417

4730-14-297-1587

4730-14-520-6749
Tube Union

145206749
77729680H: RNCC: 3 | RNVC: 2

30 May 2000

4730-14-572-1061
Sediment Strainer

145721061
843957: RNCC: 3 | RNVC: 2

7 Jun 2012

4730-14-257-5707
Mamelon Circuit Fre

142575707
287P464: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-279-5375

4730-14-269-2032

4730-14-564-1843
Tube To Gas Fitting Straight Adapter

145641843
GE08LRCF: RNCC: 3 | RNVC: 2

13 Apr 2010

4730-14-240-7115
Manchette Coudee A

142407115
NG410-45-36X152: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-435-2643
Quick Disconnect Coupling Half

144352643
RBE06-7906OD3: RNCC: 3 | RNVC: 2
91607016: RNCC: 5 | RNVC: 2

2 Nov 1989

4730-14-494-6984
Tube To Boss Straight Adapter

144946984
NO PRIMARY REF14-494-6984: RNCC: 3 | RNVC: 2
0171122: RNCC: 5 | RNVC: 9
F300 0T 017 7975: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-405-0757
Pipe Flange

144050757
NO PRIMARY REF14-405-0757: RNCC: 3 | RNVC: 2
BR12V0ED: RNCC: 5 | RNVC: 9

20 Nov 1985

4730-14-452-9015
Anchor And Reinforcement Pipe Clamp

144529015
SPAL8114,3PA-DPAL-AS: RNCC: 3 | RNVC: 2

27 Jan 1992

4730-14-281-6582
Fluid Flow Restrictor

142816582
RUHB8-1701: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-494-1267
Union

144941267
101375-08K: RNCC: 3 | RNVC: 2
F300 0T 015 6098: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-577-1845
Hose Clamp

145771845
701422: RNCC: 3 | RNVC: 2

21 Aug 2013

4730-14-328-0065

4730-14-578-1807
Pipe To Tube Tee

145781807
S64PB6-1/4: RNCC: 3 | RNVC: 2
S64PB6-1/4: RNCC: 5 | RNVC: 2

7 Nov 2013

4730-14-553-4222
Quick Disconnect Coupling Half

145534222
6-FCB-M8-SS: RNCC: 3 | RNVC: 2

3 Apr 2007

4730-14-443-3735
Tube To Boss Straight Adapter

144433735
F3BRAB25-3/4: RNCC: 3 | RNVC: 2
F3BRAB25-3/4: RNCC: 3 | RNVC: 9

20 Nov 1990

4730-14-570-3624
Hose Clamp

145703624
E 168: RNCC: 3 | RNVC: 2
E168: RNCC: 5 | RNVC: 2

12 Dec 2011

4730-14-269-1866
Pipe Flange

142691866
7066CD1M48-3: RNCC: 2 | RNVC: 2
4730BB-48,3M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-418-4614
Flange To Hose Straight Adapter

144184614
4-453102: RNCC: 3 | RNVC: 9
4-453102: RNCC: 5 | RNVC: 2
4-453102: RNCC: 5 | RNVC: 9

26 Aug 1987

4730-14-392-4637
Threaded Tube Fitting Plug

143924637
246-1-8G: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-297-9918

4730-14-234-4803

4730-14-268-1220
Pipe Flange

142681220
6784-1DG110-50: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-563-7226
Tube Coupling Assembly

145637226
YDA.210.0447: RNCC: 3 | RNVC: 2
YDA.210.0447: RNCC: 5 | RNVC: 2
YDA 21124-8-9/16UNJF: RNCC: 5 | RNVC: 2

9 Mar 2010

4730-14-303-0031
Tube Fitting Brazing Ferrule

143030031
GSM163-011REP14-1F6: RNCC: 3 | RNVC: 2
GSM163-011F6-1B: RNCC: 5 | RNVC: 2
GSM163-11-1B: RNCC: 5 | RNVC: 2
GSM163-11AREP14-1: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-427-4804
Tube Tee

144274804
S4710X0002-9038: RNCC: 3 | RNVC: 2
F0532S4710X0002-9038: RNCC: 3 | RNVC: 2
CTA20: RNCC: 5 | RNVC: 2

20 Oct 1988

4730-14-337-6817
Sediment Strainer Body

143376817
P02-0227: RNCC: 3 | RNVC: 2
P02-227: RNCC: 5 | RNVC: 2
P20-227: RNCC: 5 | RNVC: 2

6 Nov 1976

4730-14-524-7261
Bulkhead Hose Connector

145247261
MAT425-0506F1: RNCC: 3 | RNVC: 2

6 Apr 2001

4730-14-208-1298
Raccord Orientable

142081298
NO PRIMARY REF14-208-1298: RNCC: 3 | RNVC: 2
641812: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-203-0841
Raccord Special

142030841
3130S52-50-003: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-561-8035
Tube Reducer

145618035
KOR10/06LCF: RNCC: 3 | RNVC: 2
KOR10/06LCF: RNCC: 5 | RNVC: 9

8 Sep 2009

4730-14-407-2933
Tube To Boss Straight Adapter

144072933
PE41068D8: RNCC: 3 | RNVC: 2
85-800-9803: RNCC: 6 | RNVC: 9

12 Feb 1986

4730-14-222-7311
Tube Tee

142227311
GSM1297FE3-27TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-506-3207
Tube Union

145063207
RRLM33-26: RNCC: 3 | RNVC: 2

22 Apr 1998

4730-14-447-4876
Pipe Flange

144474876
LN327-016-11B-PN50DN25: RNCC: 3 | RNVC: 2

24 May 1991

4730-14-041-2436
Tube To Boss Straight Adapter

140412436
UMCL20X15-2UN: RNCC: 3 | RNVC: 2
4L20-15-2100: RNCC: 3 | RNVC: 2
MCL20-21: RNCC: 3 | RNVC: 2
52-20-15-21C0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-507-1573
Bulkhead Hose Connector

145071573
187701: RNCC: 3 | RNVC: 2

17 Jun 1998

4730-14-464-3605
Tube Coupling

144643605
13751S32A: RNCC: 3 | RNVC: 2
13751S32A: RNCC: 5 | RNVC: 9

28 Jul 1993

4730-14-267-7563
Couvercle De Pe

142677563
107464EREP711: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-329-2829
Bride De Calage

143292829
BRIDE150EP30NT10X16DP240: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-563-6008
Tube To Hose Straight Adapter

145636008
05D041: RNCC: 3 | RNVC: 2

24 Feb 2010

4730-14-568-2839
Suction Strainer

145682839
V033102: RNCC: 3 | RNVC: 2

19 May 2011

4730-14-282-1139
Bloc De Raccordemen

142821139
7117EQ2: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-227-3264
Raccord De Tuyauter

142273264
8000335: RNCC: 3 | RNVC: 2
PF9925099: RNCC: 3 | RNVC: 2
9902599: RNCC: 5 | RNVC: 2
F300 0T 003 6480: RNCC: 6 | RNVC: 9

1 Jan 1966

4730-14-499-1876
Tube To Boss Straight Adapter

144991876
63010026: RNCC: 3 | RNVC: 2
203024008006A: RNCC: 3 | RNVC: 9
F300 0T 019 7438: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-444-3403
Water Distribution Nozzle

144443403
5430648: RNCC: 3 | RNVC: 2

8 Jan 1991

4730-14-476-3342
Fluid Flow Restrictor

144763342
16671: RNCC: 3 | RNVC: 2

7 Jun 1995

4730-14-480-7275
Tube Coupling

144807275
9606170680: RNCC: 3 | RNVC: 2
000760: RNCC: 5 | RNVC: 2
434793: RNCC: 5 | RNVC: 9

28 Mar 1996

4730-14-268-1268
Diaphragme

142681268
6784-1DK50: RNCC: 2 | RNVC: 2
MEC11415: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-273-5351
Pipe Flange

142735351
7062TD1F1M87-3UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-381-4323
Tube To Boss Straight Adapter

143814323
2103-02-32-10: RNCC: 3 | RNVC: 9
32-140050VITON: RNCC: 5 | RNVC: 2
2103-02-32-10: RNCC: 5 | RNVC: 2
32-140-50V: RNCC: 5 | RNVC: 9
32-140-50VITON: RNCC: 5 | RNVC: 9
2103-02-32-00: RNCC: 5 | RNVC: 9

25 Jan 1983

4730-14-466-5443
Tube To Boss Straight Adapter

144665443
64.16.D: RNCC: 3 | RNVC: 2
89486739: RNCC: 5 | RNVC: 2
1527.06: RNCC: 5 | RNVC: 2
64-16D: RNCC: 5 | RNVC: 2

15 Nov 1993

4730-14-339-0947
Partie Mobile

143390947
GSM425-004F15: RNCC: 3 | RNVC: 2
A0009-001F10: RNCC: 5 | RNVC: 2
GSM425-04F15: RNCC: 5 | RNVC: 2

17 Dec 1976

4730-14-249-0029
Raccord

142490029
JGA08-19: RNCC: 3 | RNVC: 2
13580-602: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-292-2098
Raccord Ensemble

142922098
NO PRIMARY REF14-292-2098: RNCC: 3 | RNVC: 2
RP11: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-367-0434

4730-14-223-3046

4730-14-217-3602
Raccord Droit Speci

142173602
300662S: RNCC: 3 | RNVC: 2
300662: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-242-7964

4730-14-392-9344
Tube To Boss Straight Adapter

143929344
0024255090: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-553-9846
Tube To Boss Straight Adapter

145539846
181 197: RNCC: 3 | RNVC: 2
181 197: RNCC: 3 | RNVC: 2

6 Jun 2007

4730-14-232-6302

4730-14-330-6514

4730-14-372-2695
Tube To Boss Straight Adapter

143722695
AG4RAB12-3/8: RNCC: 3 | RNVC: 2
AG4RAB12-3/8: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-367-9160
Quick Disconnect Coupling Half

143679160
M0F13GY1-2: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-416-4200
Tube Tee

144164200
JBRAB10: RNCC: 3 | RNVC: 2
JBRAB10: RNCC: 3 | RNVC: 9

10 Jun 1987

4730-14-545-7251
Fluid Pressure Line Multiple Connector

145457251
0142002007: RNCC: 3 | RNVC: 2
91830771: RNCC: 5 | RNVC: 2

2 May 2005

4730-14-426-7944
Tube Tee

144267944
4730HEING139,7X10-88,9X8: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-510-0116
Tube Coupling

145100116
M123504: RNCC: 3 | RNVC: 9
4730AA1136130: RNCC: 6 | RNVC: 9

4 Nov 1998

4730-14-322-0004
Raccord A Soupape

143220004
226273: RNCC: 3 | RNVC: 2
107643: RNCC: 3 | RNVC: 9
SKF226273: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-226-9959
Fluid Pressure Line Multiple Connector

142269959
0000300310: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-348-3799
Tube To Boss Straight Adapter

143483799
GA70707: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-459-3049
Tube To Boss Straight Adapter

144593049
0149191000: RNCC: 3 | RNVC: 2
LV035-NS1208S: RNCC: 5 | RNVC: 2
149191: RNCC: 5 | RNVC: 2
LV035-NS1208S: RNCC: 5 | RNVC: 2

24 Nov 1992

4730-14-041-3504

4730-14-508-1135
Fluid Flow Restrictor

145081135
NO PRIMARY REF14-508-1135: RNCC: 3 | RNVC: 2
4918-2-002: RNCC: 5 | RNVC: 2

26 Aug 1998

4730-14-257-4817
Fluid Pressure Line Multiple Connector

142574817
613-573-068-0: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-212-1479
Tube Coupling Assembly

142121479
0-3951SB25X32X25A: RNCC: 3 | RNVC: 2
0-3951SB25X32X25A: RNCC: 5 | RNVC: 9
85-691-3819: RNCC: 6 | RNVC: 9

5 Jul 1980

Load More Results