What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 63 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 63 of 185

4730-14-253-3103
Raccord Intermediai

142533103
553-133MA030: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-210-9784
Croix Egale

142109784
SD502-14: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-450-5689
Sous Ensemble Bride

144505689
GSM166-005F13: RNCC: 3 | RNVC: 2

9 Oct 1991

4730-14-314-2962
Flange To Hose Straight Adapter

143142962
ECEMAT7407A: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-506-0317
Bulkhead Hose Connector

145060317
RP1M521404110: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-273-5211
Pipe Flange

142735211
7062TB1F1-87-2-5UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-284-6753
Fluid Pressure Line Multiple Connector

142846753
501-800-167-0: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-286-4480
Tube To Boss Straight Adapter

142864480
613-410-018-0: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-399-0575
Tube To Boss Straight Adapter

143990575
NO PRIMARY REF14-399-0575: RNCC: 3 | RNVC: 2
C123911-5: RNCC: 5 | RNVC: 9

6 Mar 1985

4730-14-472-2494
Tube Coupling Assembly

144722494
0-13601S32A: RNCC: 3 | RNVC: 2
0-13601S32A: RNCC: 5 | RNVC: 9
312228: RNCC: 5 | RNVC: 9
85-695-3364: RNCC: 6 | RNVC: 9

12 Oct 1994

4730-14-339-8999
Bulkhead Hose Connector

143398999
0-3761S16A: RNCC: 3 | RNVC: 2
0-3761S16A: RNCC: 5 | RNVC: 9
85-688-9417: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-14-426-7986
Tube Tee

144267986
4730HEING273X8,8-219,1X8: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-312-7861
Pipeline Flexible Spacer

143127861
300133-2-2N0NPERCE: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-325-6231
Fluid Pressure Line Multiple Connector

143256231
121B71-620-00-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-381-0374

4730-14-558-4755
Tube To Hose Straight Adapter

145584755
3101 06 17: RNCC: 3 | RNVC: 2
SP01022047A: RNCC: 5 | RNVC: 2

6 Oct 2008

4730-14-479-5071
Quick Disconnect Coupling Half

144795071
C1802 G21 10: RNCC: 3 | RNVC: 2
C 1802 G21 10: RNCC: 5 | RNVC: 2
5802-G21-10: RNCC: 5 | RNVC: 9

17 Jan 1996

4730-14-308-4708
Tube Fitting Brazing Ferrule

143084708
GSM163-011REP14-2-25F8: RNCC: 3 | RNVC: 2
GSM163-11AREP14-2-25: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-259-5035
Tige De Tuyere

142595035
E5271-11REP3: RNCC: 3 | RNVC: 2
E5271-11PC3: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-427-0630
Hose To Gas Fitting Straight Adapter

144270630
A013511 08 10: RNCC: 3 | RNVC: 2
91618188: RNCC: 5 | RNVC: 2
2055G21-10: RNCC: 5 | RNVC: 9

6 Oct 1988

4730-14-519-7913
Bulkhead Hose Connector

145197913
330A55-0206-2001: RNCC: 3 | RNVC: 2

7 Apr 2000

4730-14-549-2311
Quick Disconnect Coupling Half

145492311
RBE06.6808/45: RNCC: 3 | RNVC: 2

13 Mar 2006

4730-14-389-7942
Pipe Flange

143897942
MN6363-1F4-5DN150: RNCC: 2 | RNVC: 2

20 Dec 1983

4730-14-228-6794
Tube Tee

142286794
GSM1297FD3-1TABLEAU2D1-20: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-419-1839
Quick Disconnect Coupling Half

144191839
NO PRIMARY REF14-419-1839: RNCC: 3 | RNVC: 2
QST8/05: RNCC: 5 | RNVC: 9

12 Oct 1987

4730-14-479-1793
Hose To Boss Straight Adapter

144791793
MAT212-04-00: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-353-9535
Tube To Boss Straight Adapter

143539535
91141417: RNCC: 3 | RNVC: 2
A4-14-12X17: RNCC: 5 | RNVC: 9

16 Jan 1979

4730-14-524-6766
Filler Cap Adapter Assembly

145246766
503522-1: RNCC: 3 | RNVC: 2

4 Apr 2001

4730-14-422-6800
Tube To Boss Straight Adapter

144226800
2-521232-3: RNCC: 3 | RNVC: 2
2-521232-3: RNCC: 5 | RNVC: 9

15 Mar 1988

4730-14-378-6616
Tube To Boss Straight Adapter

143786616
84541421: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-408-4489
Tube To Boss Straight Adapter

144084489
LW114-NC0804S: RNCC: 3 | RNVC: 2
8901081347NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-559-4041
Fluid Pressure Line Multiple Connector

145594041
3311 10 13 05: RNCC: 3 | RNVC: 2

7 Jan 2009

4730-14-217-5062

4730-14-273-5223
Pipe Flange

142735223
7062TB1F1-171-3-5UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-263-6380
Tube Coupling

142636380
7062BC1RPET2-10CA52-3: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-263-6372
Tube Coupling

142636372
7062BC1RPET1-41-5A52-3: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-390-4422
Pipe Expansion Joint

143904422
NO PRIMARY REF14-390-4422: RNCC: 3 | RNVC: 2
M18416-1: RNCC: 5 | RNVC: 9

26 Jan 1984

4730-14-506-1966
Branched Tubing Connector

145061966
4-595106-3: RNCC: 3 | RNVC: 2
4-595106-3: RNCC: 5 | RNVC: 9
4730-65-0000028: RNCC: 6 | RNVC: 9

10 Apr 1998

4730-14-450-4663
Raccord A Planter

144504663
702A30-0739-20: RNCC: 3 | RNVC: 2

9 Oct 1991

4730-14-411-2569
Flexible Tube Coupling Assembly

144112569
L10-03: RNCC: 3 | RNVC: 2
DHS613-211-16: RNCC: 5 | RNVC: 2
L10-0-3: RNCC: 5 | RNVC: 2

6 Aug 1986

4730-14-211-2172
Raccord Hb Serie Co

142112172
20X8: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-216-2203

4730-14-401-3231
Circuit Vibration

144013231
02K5545120: RNCC: 3 | RNVC: 2

5 Jun 1985

4730-14-383-0575
Fluid Pressure Line Multiple Connector

143830575
NO PRIMARY REF14-383-0575: RNCC: 3 | RNVC: 2
5204-300: RNCC: 5 | RNVC: 9

17 Mar 1983

4730-14-441-7561
Quick Disconnect Coupling Half

144417561
RBE06-1102/3: RNCC: 3 | RNVC: 2

17 Sep 1990

4730-14-224-3918
Tube Fitting Brazing Ferrule

142243918
GSM163-002F7-14-2-10: RNCC: 3 | RNVC: 2
GSM163-02F7-14-2-10: RNCC: 5 | RNVC: 2
14-2-10: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-520-2987
Tube To Boss Straight Adapter

145202987
8-133-M4-SS-NPT: RNCC: 3 | RNVC: 9

17 May 2000

4730-14-427-8899

4730-14-428-5854
Equipe Flasque

144285854
SBE1042: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-388-7584
Tube To Hose Straight Adapter

143887584
NU208: RNCC: 3 | RNVC: 2
M4ZS500D5690: RNCC: 5 | RNVC: 2

29 Nov 1983

4730-14-474-1700
Sediment Strainer Element

144741700
120-46DIA16BZ: RNCC: 3 | RNVC: 2

1 Feb 1995

4730-14-366-6057

4730-14-492-8846
Union

144928846
126989H1: RNCC: 3 | RNVC: 2
F300 0T 009 2640: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-041-3812
Raccord Ebauche Ada

140413812
RDE6ACIER: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-031-7237
Tube To Boss Straight Adapter

140317237
91354050: RNCC: 3 | RNVC: 2
2-2761-00-00-25: RNCC: 3 | RNVC: 9
91354050: RNCC: 5 | RNVC: 2
91354050: RNCC: 5 | RNVC: 9
91354050: RNCC: 5 | RNVC: 9
91354050: RNCC: 5 | RNVC: 9

14 Jun 1980

4730-14-561-9566
Tube Nipple

145619566
CR490468: RNCC: 3 | RNVC: 2

18 Sep 2009

4730-14-279-7077

4730-14-362-1334

4730-14-563-8037
Tube Fitting Clinch Sleeve

145638037
7774: RNCC: 3 | RNVC: 2

17 Mar 2010

4730-14-511-1795
Fluid Flow Restrictor

145111795
GA65218: RNCC: 3 | RNVC: 2

9 Dec 1998

4730-14-452-5633
Pipe Flange

144525633
LN32033F28DN100: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-501-1821
Tube To Boss Straight Adapter

145011821
083315: RNCC: 3 | RNVC: 2
F300 0T 025 2225: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-536-8631
Fluid Passage Bolt

145368631
36403260: RNCC: 3 | RNVC: 2

17 Sep 2003

4730-14-530-4479
Pipe To Tube To Hose Tee

145304479
211-R-3/8X3/8X3/8: RNCC: 3 | RNVC: 2

12 Jun 2002

4730-14-562-4843
Tube Elbow

145624843
NO PRIMARY REF 14-562-4843: RNCC: 3 | RNVC: 2
191047: RNCC: 5 | RNVC: 2
FS0004311: RNCC: 6 | RNVC: 9

29 Oct 2009

4730-14-410-1918
Tube To Hose Straight Adapter

144101918
21-4E86-64-3420-150-001ADAPT: RNCC: 3 | RNVC: 2

16 Jun 1986

4730-14-377-6318
Fluid Pressure Line Multiple Connector

143776318
366A61-3431-20: RNCC: 3 | RNVC: 2

7 Mar 1996

4730-14-469-9874
Flared Tube Fitting Conical Seal

144699874
NO PRIMARY REF14-469-9874: RNCC: 3 | RNVC: 2
4015225: RNCC: 5 | RNVC: 9
4015225: RNCC: 5 | RNVC: 9

25 May 1994

4730-14-397-7003
Embout Filete A Sou

143977003
GSM164-023F38: RNCC: 3 | RNVC: 2
MAT164-0355F38: RNCC: 3 | RNVC: 2
4730ACF3PN250DE42,16: RNCC: 3 | RNVC: 9

14 Dec 1984

4730-14-389-0343
Tube To Boss Straight Adapter

143890343
703A94-7535-00: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-553-1145
Tube To Boss Straight Adapter

145531145
GE10LM16X1-5EDOMDA3C: RNCC: 3 | RNVC: 2
437159: RNCC: 5 | RNVC: 2
GE10LM16X1-5EDOMDA3C: RNCC: 5 | RNVC: 9

5 Mar 2007

4730-14-398-1409
Tube To Boss Straight Adapter

143981409
355A53-3005-20: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-366-3927
Tube Coupling

143663927
22A12L16X150F: RNCC: 3 | RNVC: 2
9UMF12-16X150K: RNCC: 3 | RNVC: 2
5000496026: RNCC: 5 | RNVC: 2
122124188: RNCC: 5 | RNVC: 2
5000496026: RNCC: 5 | RNVC: 9

20 Nov 1980

4730-14-328-0079
Tube To Boss Straight Adapter

143280079
91141680: RNCC: 3 | RNVC: 2
A4-16-20X150: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-400-4226
Tube Tee

144004226
Q01R6410: RNCC: 3 | RNVC: 2
85-692-7888: RNCC: 6 | RNVC: 9

24 Apr 1985

4730-14-402-9815
Quick Disconnect Coupling Half

144029815
RBE11-7153: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-452-8659
Tube Coupling

144528659
NRB117: RNCC: 3 | RNVC: 9
91640196: RNCC: 5 | RNVC: 2
RASNRB117: RNCC: 5 | RNVC: 9

22 Jan 1992

4730-14-388-2682
Self-Sealing Coupling Half

143882682
1721221: RNCC: 3 | RNVC: 2

12 Oct 1983

4730-14-515-4391
Tube To Boss Straight Adapter

145154391
250RMF3814GALVA: RNCC: 3 | RNVC: 2
SOA250RMF3814GALVA: RNCC: 5 | RNVC: 9

13 Jul 1999

4730-14-452-1892
Flexible Tube Coupling Assembly

144521892
15090230Z: RNCC: 3 | RNVC: 2

24 Dec 1991

4730-14-522-9588
Flange To Tube Straight Adapter

145229588
ST159-2M561P45: RNCC: 3 | RNVC: 2

13 Dec 2000

4730-14-422-9216
Tube To Boss Straight Adapter

144229216
P4-13-8-15-21: RNCC: 3 | RNVC: 2
231330: RNCC: 5 | RNVC: 2
91636465: RNCC: 5 | RNVC: 2

24 Mar 1988

4730-14-493-2875
Tube To Boss Straight Adapter

144932875
NO PRIMARY REF14-493-2875: RNCC: 3 | RNVC: 2
GE16PSR3-8: RNCC: 5 | RNVC: 9
F300 0T 011 9595: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-253-8085
Reducteur Pour Tube

142538085
21-91-03D32D1-16: RNCC: 3 | RNVC: 2
721-910-343: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-329-6435
Quick Disconnect Coupling Half

143296435
STH00843: RNCC: 3 | RNVC: 2
STH008-43: RNCC: 5 | RNVC: 2
STH00843: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-365-1342
Quick Disconnect Coupling Assembly

143651342
N00616075: RNCC: 3 | RNVC: 2
S00612575: RNCC: 5 | RNVC: 2
N006-160-75: RNCC: 5 | RNVC: 2
N006 160 75: RNCC: 5 | RNVC: 2

2 Sep 1980

4730-14-273-5415
Pipe Flange

142735415
7062TD1F1F171-5-5UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-559-8473
Hose To Gas Fitting Straight Adapter

145598473
1DC16840: RNCC: 3 | RNVC: 2

24 Feb 2009

4730-14-370-0497
Jeu Raccords

143700497
004378050P: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-335-0551
Raccordement Bloc

143350551
A0191-023: RNCC: 3 | RNVC: 2

2 Jun 1976

4730-14-539-2391
Quick Disconnect Plug

145392391
284-06: RNCC: 3 | RNVC: 2

17 Dec 2003

4730-14-445-1398
Self-Sealing Coupling Assembly

144451398
SOM75-0-3-4-2117: RNCC: 3 | RNVC: 2
SM07512AU2117: RNCC: 5 | RNVC: 2
85-694-3038: RNCC: 6 | RNVC: 9

4 Feb 1991

4730-14-354-1317
Tube To Boss Straight Adapter

143541317
53-8-10X100: RNCC: 3 | RNVC: 2

30 Oct 2001

4730-14-485-0412
Hose To Boss Straight Adapter

144850412
7046-105-0: RNCC: 3 | RNVC: 2
7046-105-0: RNCC: 5 | RNVC: 9

19 Dec 1996

4730-14-296-7967

4730-14-378-6537

4730-14-512-3718
Tube Union

145123718
NO PRIMARY REF14-512-3718: RNCC: 3 | RNVC: 2
NNP 4130864531873: RNCC: 5 | RNVC: 9

10 Feb 1999

4730-14-364-8723
Pipe Flange

143648723
4730CA-25: RNCC: 2 | RNVC: 2
MEC10367: RNCC: 3 | RNVC: 2
4730CA25: RNCC: 3 | RNVC: 9

2 Sep 1980

4730-14-340-1198
Tube To Boss Straight Adapter

143401198
9114107066: RNCC: 3 | RNVC: 2
CA4-10-14-125: RNCC: 5 | RNVC: 9
CA4-10-14X125: RNCC: 5 | RNVC: 9

18 Jan 1977

4730-14-564-6901
Tube Nipple

145646901
P610321: RNCC: 3 | RNVC: 2

26 May 2010

4730-14-560-5436
Hydraulic System Accessories Manifold

145605436
14000135: RNCC: 3 | RNVC: 2

29 Apr 2009

4730-14-294-2272
Tube Coupling

142942272
121E52-175-04-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-355-8594
Tube To Boss Straight Adapter

143558594
UMA6 1-8NPT: RNCC: 3 | RNVC: 2

5 Apr 1979

4730-14-277-6558
Pipe Flange

142776558
6784-1CD14-6: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-392-0671
Tube To Boss Straight Adapter

143920671
403-712-282-0: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-438-3858
Tube Coupling

144383858
4730HL-3DE21,3: RNCC: 2 | RNVC: 2
Y07134-01-0000P003DE21,3: RNCC: 3 | RNVC: 2
RAR1445: RNCC: 5 | RNVC: 2

19 Mar 1990

4730-14-360-7251
Tube To Boss Straight Adapter

143607251
T28HFB12M22: RNCC: 3 | RNVC: 2
T28HFB12M22: RNCC: 3 | RNVC: 2
T28HFB12M22X1-5: RNCC: 5 | RNVC: 2
U8 1-2X12-22X150: RNCC: 5 | RNVC: 2
U8 1-2X12-22X150: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-500-6317
Tube To Boss Straight Adapter

145006317
XGE30-S-R1A3C: RNCC: 3 | RNVC: 2
XGE30SR1A3C: RNCC: 3 | RNVC: 2
F300 0T 024 6503: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-537-7531
Tube Coupling

145377531
20-7-E-30CA-3344-017-001REP9: RNCC: 3 | RNVC: 2

19 Nov 2003

4730-14-413-1121
Tube To Hose Straight Adapter

144131121
P4-12-20 1-4BGSNU: RNCC: 3 | RNVC: 2
PLC3593NU: RNCC: 5 | RNVC: 2

26 Nov 1986

4730-14-553-5677
Quick Disconnect Coupling Half

145535677
RBE08-1103-IA-JV-W: RNCC: 3 | RNVC: 2

17 Apr 2007

4730-14-474-8866
Tube To Boss Straight Adapter

144748866
4A16L22X150C0NU: RNCC: 3 | RNVC: 2
104-1-05310NU: RNCC: 5 | RNVC: 2
104L05310NU: RNCC: 5 | RNVC: 2
91629820: RNCC: 5 | RNVC: 2

8 Mar 1995

4730-14-260-2045
Fluid Pressure Line Multiple Connector

142602045
3265-20539-601: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-346-7041
Swivel Retaining Pipe Flange

143467041
6784-1DC114-3: RNCC: 2 | RNVC: 2
MEC11406: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-402-9020
Tube To Boss Straight Adapter

144029020
NO PRIMARY REF14-402-9020: RNCC: 3 | RNVC: 2
24208M12X1-5: RNCC: 5 | RNVC: 9

25 Jul 1985

4730-14-304-0428
Tube Tee

143040428
R6X6X12: RNCC: 3 | RNVC: 2
R6-6-12: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-489-0827
Tube To Boss Straight Adapter

144890827
RI-1/2X3/8/A3C: RNCC: 3 | RNVC: 2
RI-1/2X3/8/A3C: RNCC: 3 | RNVC: 9

24 Jun 1997

4730-14-409-7529
Tube To Boss Straight Adapter

144097529
A81793: RNCC: 3 | RNVC: 2
85-692-9136: RNCC: 6 | RNVC: 9

28 May 1986

4730-14-454-9700
Tube-Hose Fitting Compression Sleeve

144549700
9995455: RNCC: 3 | RNVC: 2

30 Apr 1992

4730-14-374-3991
Tube To Boss Straight Adapter

143743991
7749: RNCC: 3 | RNVC: 9

8 Dec 1981

4730-14-452-9816
Sediment Strainer Element

144529816
250-50-7X65CQ: RNCC: 3 | RNVC: 2

29 Jan 1992

4730-14-393-9371
Sediment Strainer Element

143939371
A87522: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-346-0805
Tube To Boss Straight Adapter

143460805
S3Z59364816: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-533-6941
Special-Shaped Hose Clamp

145336941
1431-511B560: RNCC: 3 | RNVC: 2
1431-511B560: RNCC: 5 | RNVC: 9

19 Feb 2003

4730-14-448-9840
Tube To Boss Straight Adapter

144489840
XGE6PLR: RNCC: 3 | RNVC: 2

24 Jul 1991

4730-14-398-6649
Tube To Boss Straight Adapter

143986649
IMT030332: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-294-4044
Bulkhead Hose Connector

142944044
460173: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-554-5838
Flange To Hose Elbow

145545838
9945200160: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-367-7188
Quick Disconnect Coupling Half

143677188
S12594CD: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-410-8684

4730-14-315-0689
Tube To Boss Straight Adapter

143150689
NO PRIMARY REF14-315-0689: RNCC: 3 | RNVC: 2
308311: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-313-6746
Fluid Pressure Line Multiple Connector

143136746
623-33-95INFSK: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-410-7581
Flange To Boss Straight Adapter

144107581
A02560-01-1000P011: RNCC: 3 | RNVC: 2

9 Jul 1986

4730-14-452-7493
Quick Disconnect Coupling Half

144527493
RBE06-2806IA45: RNCC: 3 | RNVC: 2
91363651: RNCC: 5 | RNVC: 2

15 Jan 1992

4730-14-368-8820
Tube To Boss Straight Adapter

143688820
Q1-5GE20SR15-21CYLEQUIPE: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-371-0559
Tube Fitting Clinch Sleeve

143710559
4730AJ4.6DN25: RNCC: 2 | RNVC: 2
6016175849: RNCC: 3 | RNVC: 2
8424250066: RNCC: 5 | RNVC: 2
LL001-CK25S: RNCC: 5 | RNVC: 2

5 Jun 1981

4730-14-468-1450
Fluid Pressure Line Multiple Connector

144681450
1400-957-04: RNCC: 3 | RNVC: 2
714651: RNCC: 5 | RNVC: 2
89296277: RNCC: 5 | RNVC: 2

9 Feb 1994

4730-14-441-4936
Fluid Pressure Line Multiple Connector

144414936
332A75-2023-21: RNCC: 3 | RNVC: 2

30 Aug 1990

4730-14-509-2795
Flange To Tube Straight Adapter

145092795
K04-100-202: RNCC: 3 | RNVC: 2

23 Oct 1998

4730-14-408-2617
Bulkhead Hose Connector

144082617
RBE08-28060SICVDFBDKB: RNCC: 3 | RNVC: 2
2427432140: RNCC: 5 | RNVC: 2
2427432140: RNCC: 5 | RNVC: 9

19 Mar 1986

4730-14-262-1385
Pipe Flange

142621385
7062DG1F1M133-3XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-305-6254
Tube Tee

143056254
9104130047: RNCC: 3 | RNVC: 2
I7-13: RNCC: 5 | RNVC: 9
I7-13HP: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-379-5638
Quick Disconnect Coupling Half

143795638
2427428240: RNCC: 3 | RNVC: 2
MR4-7808-9IBW: RNCC: 3 | RNVC: 2
2427428240: RNCC: 5 | RNVC: 9
85-691-6556: RNCC: 6 | RNVC: 9

1 Oct 1982

4730-14-236-8657
Fluid Passage Bolt

142368657
321A75-0817-20: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-303-5953
Self-Sealing Coupling Assembly

143035953
15065026A24296: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-547-1787
Tube Tee

145471787
93404301: RNCC: 3 | RNVC: 2
5005630179: RNCC: 5 | RNVC: 2

3 Oct 2005

4730-14-430-6860
Quick Disconnect Coupling Half

144306860
480069: RNCC: 3 | RNVC: 2
480069: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-525-5111
Fluid Flow Restrictor

145255111
705921: RNCC: 3 | RNVC: 2
705921: RNCC: 5 | RNVC: 9

6 Jun 2001

4730-14-214-4844
Tube Tee

142144844
17-4NN: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-547-1656
Tube Tee

145471656
93402510: RNCC: 3 | RNVC: 2
5005630100: RNCC: 5 | RNVC: 2

29 Sep 2005

4730-14-325-0765
Tube Tee

143250765
R12X16SX12: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-419-0649
Fluid Passage Bolt

144190649
43312AG18: RNCC: 2 | RNVC: 2

30 Sep 1987

4730-14-500-0902
Tube To Boss Straight Adapter

145000902
1442020X91: RNCC: 3 | RNVC: 2
F300 0T 024 0914: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-509-6952
Tube-Hose Fitting Compression Sleeve

145096952
741VN08: RNCC: 3 | RNVC: 2
741.VN.08: RNCC: 3 | RNVC: 2
162042: RNCC: 5 | RNVC: 2
741 VN 08: RNCC: 5 | RNVC: 2
741VN08: RNCC: 5 | RNVC: 2

28 Oct 1998

4730-14-313-6739
Fluid Pressure Line Multiple Connector

143136739
25SR33-1: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-255-6351
Raccord Equipe

142556351
6700A20-1: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-362-5899

4730-14-561-8718
Tube Elbow

145618718
DV5570: RNCC: 3 | RNVC: 2

14 Sep 2009

4730-14-325-6678
Ensemble Raccord

143256678
SJS90B: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-566-0298
Bulkhead Hose Connector

145660298
91019: RNCC: 3 | RNVC: 2
438022: RNCC: 5 | RNVC: 2

13 Oct 2010

4730-14-485-3109
Bulkhead Hose Connector

144853109
RA1M525001171U1: RNCC: 3 | RNVC: 2

15 Jan 1997

4730-14-549-0561
Bulkhead Hose Connector

145490561
RA1B534803180: RNCC: 3 | RNVC: 2

2 Mar 2006

4730-14-528-9155
Tube Coupling

145289155
8938034400: RNCC: 3 | RNVC: 2

22 Feb 2002

4730-14-487-5868
Pipeline Flexible Spacer

144875868
EVCYDEAC9S: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-332-0654
Bulkhead Hose Connector

143320654
R5816Z39: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-392-4636
Tube Tee

143924636
JBMB6: RNCC: 3 | RNVC: 2
JBMB6: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-301-8117
Sediment Strainer Element

143018117
2019TADN20: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-538-1714
Lubrication Fitting

145381714
NGM0010031870538: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-368-8824
Self-Sealing Coupling Assembly

143688824
MX80DN25TYPEA: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-406-7532
Tube To Boss Straight Adapter

144067532
DM60: RNCC: 3 | RNVC: 2
DM60: RNCC: 5 | RNVC: 2

8 Jan 1986

4730-14-482-2501
Fluid Flow Restrictor

144822501
6717-72: RNCC: 3 | RNVC: 2

27 Jun 1996

4730-14-396-6016
Flange To Tube Elbow

143966016
66865: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-462-4079
Pipe To Boss Straight Adapter

144624079
58025: RNCC: 3 | RNVC: 2

15 Apr 1993

4730-14-503-1955
Hose Coupling Assembly

145031955
DA2C500051800: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-322-0179
Manchette Prise Ech

143220179
ECEMAT7215DN40: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-227-0811

4730-14-226-0809

4730-14-278-3122

4730-14-425-6750
Tuyauterie Montage

144256750
8002753600: RNCC: 3 | RNVC: 2

21 Jul 1988

4730-14-361-0345

4730-14-315-9966
Tube To Boss Straight Adapter

143159966
1-1136ZC00-04: RNCC: 3 | RNVC: 2
1-1136ZC00-04: RNCC: 5 | RNVC: 9
1-1136Z000-04: RNCC: 5 | RNVC: 9
1-1136ZC00-04: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-453-8675
Tube To Gas Fitting Straight Adapter

144538675
P4-12-6-8-13CYL: RNCC: 3 | RNVC: 2

12 Mar 1992

4730-14-531-5864
Tube Union

145315864
MAT164-0043F1-HP-DE10: RNCC: 3 | RNVC: 2

2 Sep 2002

4730-14-400-7858
Sediment Strainer Element

144007858
121B71-140-05-0M1: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-513-1301
Quick Disconnect Coupling Half

145131301
RBE032904-OD-IC-9: RNCC: 3 | RNVC: 2
RBE032904-IC-9-0D: RNCC: 5 | RNVC: 2
RBE032904-IC-9CD: RNCC: 5 | RNVC: 2
RBE032904IC9CD: RNCC: 5 | RNVC: 2

5 Mar 1999

4730-14-277-6554
Pipe Flange

142776554
6784-1CD20-8: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-378-8702
Tube To Boss Straight Adapter

143788702
UML4X8-100NU: RNCC: 3 | RNVC: 2
4L4-8X100NU: RNCC: 3 | RNVC: 2
92-4-8X100NU: RNCC: 3 | RNVC: 2

6 Sep 1982

4730-14-498-3201
Tube To Boss Straight Adapter

144983201
UMA12 1-4BSPNU: RNCC: 3 | RNVC: 2
91952741: RNCC: 3 | RNVC: 2
F300 0T 004 7877: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-325-5077
Tube To Boss Straight Adapter

143255077
R 32 10 9/16SAE TZ144: RNCC: 3 | RNVC: 2
EDM0610: RNCC: 3 | RNVC: 2
R32-10-9-16: RNCC: 5 | RNVC: 2
R32-10-9-16SAE: RNCC: 5 | RNVC: 2
91313998: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-340-4249
Tube Coupling Inverted Nut

143404249
0294401290: RNCC: 3 | RNVC: 2
302-265-701P: RNCC: 5 | RNVC: 2

14 Feb 1977

4730-14-521-6218
Tube To Boss Straight Adapter

145216218
FB1A521-03830: RNCC: 3 | RNVC: 2

30 Aug 2000

4730-14-256-6079
Fluid Pressure Line Multiple Connector

142566079
NO PRIMARY REF14-256-6079: RNCC: 3 | RNVC: 2
R014: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-310-5762
Tube To Boss Straight Adapter

143105762
EFF1-150-119: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-340-9019
Tube To Boss Straight Adapter

143409019
330A21-2168-20: RNCC: 3 | RNVC: 2

14 Feb 1977

4730-14-308-8877
Fluid Passage Bolt

143088877
EFF1-150-109: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-275-0559
Swivel Retaining Pipe Flange

142750559
160-10035-27: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-369-6338
Quick Disconnect Coupling Half

143696338
PSA06-6809/1: RNCC: 3 | RNVC: 2
PSA06-6809-1: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-236-8645
Fluid Pressure Line Multiple Connector

142368645
321A75-0170-20: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-362-4096
Tube To Boss Straight Adapter

143624096
9159148058NU: RNCC: 3 | RNVC: 2
VDP5018: RNCC: 5 | RNVC: 2
A22-14-20-150CBNU: RNCC: 5 | RNVC: 9

19 Mar 1980

4730-14-261-3059
Fluid Pressure Line Multiple Connector

142613059
175-79-26: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-379-6741
Tube To Boss Straight Adapter

143796741
NO PRIMARY REF14-379-6741: RNCC: 3 | RNVC: 2
R1-4GAZ: RNCC: 5 | RNVC: 9

20 Oct 1982

4730-14-428-7986
Pipe Flange

144287986
75-421-04-09: RNCC: 3 | RNVC: 2

21 Dec 1988

4730-14-344-4675
Fluid Pressure Line Multiple Connector

143444675
EA1M712-015: RNCC: 3 | RNVC: 2

10 Aug 1977

4730-14-438-0915
Tube To Boss Straight Adapter

144380915
NO PRIMARY REF14-438-0915: RNCC: 3 | RNVC: 2
288406: RNCC: 5 | RNVC: 9
288406: RNCC: 5 | RNVC: 9

7 Mar 1990

4730-14-273-5227
Pipe Flange

142735227
7062TB1F1-216-4UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-416-4294
Flange To Hose Straight Adapter

144164294
GSM166-010F21: RNCC: 3 | RNVC: 2

10 Jun 1987

4730-14-423-9726
Fluid Pressure Line Multiple Connector

144239726
6463-64: RNCC: 3 | RNVC: 2
7920062856: RNCC: 5 | RNVC: 2

5 May 1988

4730-14-223-6866
Tube Coupling

142236866
JEA20-65: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-409-6753
Multiple Raccord

144096753
R4P721-77: RNCC: 3 | RNVC: 2

28 May 1986

4730-14-360-5862
Tube Tee

143605862
16787506: RNCC: 3 | RNVC: 2
16787506: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-365-6835
Tube Tee

143656835
9450038858: RNCC: 3 | RNVC: 2
VDP4681: RNCC: 5 | RNVC: 2

8 Oct 1980

4730-14-293-3851
Bulkhead Hose Connector

142933851
0210160140: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-330-8001
Tube Tee

143308001
GSM163-017F50: RNCC: 3 | RNVC: 2
GSM163-17F50: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-220-6566
Tube Tee

142206566
Q1-5TR20X14X20SD: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-471-7107
Bulkhead Hose Connector

144717107
LN327-01518DN125: RNCC: 3 | RNVC: 2

13 Sep 1994

4730-14-374-3542
Tube Fitting Brazing Ferrule

143743542
N67103: RNCC: 3 | RNVC: 2
85-691-5141: RNCC: 6 | RNVC: 9

8 Dec 1981

4730-14-304-4882
Bulkhead Hose Connector

143044882
F781-30: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-564-4802
Boss Cross

145644802
8935500454: RNCC: 3 | RNVC: 2
A231004000108: RNCC: 5 | RNVC: 2

3 May 2010

4730-14-271-1075

4730-14-328-4966

4730-14-329-2825
Bride De Calage

143292825
BRIDE80EP30NT6X18DP160: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-316-9119

4730-14-311-7037

4730-14-294-5019

4730-14-261-3565
Embout Lisse Specia

142613565
77881: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-414-9285
Berceau

144149285
915-4-41-12: RNCC: 3 | RNVC: 2

24 Mar 1987

4730-14-334-2656
Tube To Boss Straight Adapter

143342656
Q1-42-6-5-10C0Q3-105PQ1-5-404: RNCC: 3 | RNVC: 2

23 Apr 1976

4730-14-328-6713
Lubrication Fitting

143286713
7-90-8-125: RNCC: 3 | RNVC: 2
65DN11: RNCC: 5 | RNVC: 9
7-90-8-125: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-418-6211
Bague Pour Collier

144186211
MAT169-0001F29DE88,9: RNCC: 3 | RNVC: 2

7 Sep 1987

4730-14-312-0129
Quick Disconnect Coupling Assembly

143120129
48050392: RNCC: 3 | RNVC: 2
45888: RNCC: 3 | RNVC: 2
45888-1: RNCC: 5 | RNVC: 2
5100103760: RNCC: 5 | RNVC: 2
11604/48058: RNCC: 5 | RNVC: 9
48050392: RNCC: 5 | RNVC: 9
48058: RNCC: 5 | RNVC: 9
91758398: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-428-5031
Tube Tee

144285031
713 D 25 16 25: RNCC: 3 | RNVC: 2
P165D251625: RNCC: 3 | RNVC: 2
713D25 16 25: RNCC: 5 | RNVC: 2
713D25-16-25: RNCC: 5 | RNVC: 2
713D251625: RNCC: 5 | RNVC: 2
74713D251625: RNCC: 5 | RNVC: 2
74713D251625: RNCC: 5 | RNVC: 2

8 Dec 1988

4730-14-374-7606
Tube To Boss Straight Adapter

143747606
1-1021SB00-01: RNCC: 3 | RNVC: 9
1-1021SB00-01: RNCC: 5 | RNVC: 9

30 Jan 1982

4730-14-427-5681
Bulkhead Hose Connector

144275681
854-100-043-0: RNCC: 3 | RNVC: 2

20 Oct 1988

4730-14-359-5878
Tube To Boss Straight Adapter

143595878
42-12-8-13CYLNU: RNCC: 3 | RNVC: 2
5000497246: RNCC: 5 | RNVC: 2
5000497246: RNCC: 5 | RNVC: 9

15 Oct 1979

4730-14-408-9446
Tube To Boss Straight Adapter

144089446
4A6L5-10CO: RNCC: 3 | RNVC: 9

9 Apr 1986

4730-14-395-3557
Sediment Strainer Element

143953557
10-80-302: RNCC: 3 | RNVC: 9

2 Oct 1984

4730-14-348-1531
Raccord Pressurisat

143481531
0905-500-015A: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-345-6260
Tube Tee

143456260
Q1-5TR14X10X14: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-527-6897
Tube Tee

145276897
717222: RNCC: 3 | RNVC: 2

13 Nov 2001

4730-14-554-2225
Tube To Boss Straight Adapter

145542225
358 169: RNCC: 3 | RNVC: 2
358 169: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-14-230-9794
Tube Tee

142309794
0000241666: RNCC: 3 | RNVC: 2
0000241666: RNCC: 5 | RNVC: 9
241666: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-391-7584
Flange To Boss Straight Adapter

143917584
480931: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-543-8081
Tube To Boss Straight Adapter

145438081
560502114: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-518-7152
Tube Tee

145187152
SARFLEX10A6EQSBA6 10X100: RNCC: 3 | RNVC: 2

16 Feb 2000

4730-14-205-2734
Quick Disconnect Coupling Half

142052734
S2161DG: RNCC: 3 | RNVC: 2
S2161: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-347-6060
Tube To Boss Straight Adapter

143476060
BN347508: RNCC: 3 | RNVC: 2

1 Mar 1978

4730-14-268-6403

4730-14-258-4090
Raccord Special

142584090
17787-8: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-325-3483
Ecrou Ridoir

143253483
14-73CHECR0U: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-210-9747
Union Simple Male

142109747
24X150: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-249-1524
Bouchon Filete Spec

142491524
150895: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-229-2167
Raccord Droit Speci

142292167
262803: RNCC: 3 | RNVC: 2
262803: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-430-6027
Equipe Bouchon

144306027
460622: RNCC: 3 | RNVC: 2
460622: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-568-4054
Fuel Feeder Manifold

145684054
8200584032: RNCC: 3 | RNVC: 2

30 May 2011

4730-14-367-0305

4730-14-290-9479

4730-14-313-2890

4730-14-458-0843
Union Pour Tube

4730-14-401-5336
Tube Tee

144015336
F0532S4710X0002-1986: RNCC: 3 | RNVC: 2
S4710X0002-1986: RNCC: 5 | RNVC: 9

13 Jun 1985

4730-14-343-5663
Pipe Flange

143435663
A0143-014F4: RNCC: 3 | RNVC: 2

16 Jun 1977

4730-14-270-4100
Tube To Boss Straight Adapter

142704100
12-20-1BGS: RNCC: 3 | RNVC: 2
4A20-1BGS: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-306-7191
Quick Disconnect Coupling Half

143067191
RBE06-1103: RNCC: 3 | RNVC: 2
RBE6-1103: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-483-4914
Fluid Flow Restrictor

144834914
REDN-LN320038-DN150: RNCC: 3 | RNVC: 2
RAB9549: RNCC: 5 | RNVC: 2
23REDN-LN320038-DN150: RNCC: 5 | RNVC: 2
LN320038.DN150: RNCC: 5 | RNVC: 2

14 Sep 1996

4730-14-408-4393
Tube To Boss Straight Adapter

144084393
4730AJ4.3DN14NU: RNCC: 2 | RNVC: 2
Q15GE14S3/8BSPNU: RNCC: 3 | RNVC: 2
MEC10811: RNCC: 3 | RNVC: 2
8401141766NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-461-0094
Tube To Boss Straight Adapter

144610094
P4-12-6TF8: RNCC: 3 | RNVC: 2
EMDAS05683: RNCC: 5 | RNVC: 2

17 Feb 1993

4730-14-336-7237
Fluid Passage Bolt

143367237
43312AG160T: RNCC: 2 | RNVC: 2
43312AG16T: RNCC: 5 | RNVC: 2
L43312-160AGT: RNCC: 5 | RNVC: 2
L43312-16AGT: RNCC: 5 | RNVC: 2
MAF0000001467: RNCC: 6 | RNVC: 9

7 Oct 1976

4730-14-257-2154
Bulkhead Hose Connector

142572154
330A72-0012-20: RNCC: 3 | RNVC: 2
330A72-0012-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-239-3423
Bouchon Filete Spec

142393423
NO PRIMARY REF14-239-3423: RNCC: 3 | RNVC: 2
26640: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-562-7627
Hose Clamp

145627627
CBA2 14 47-67: RNCC: 3 | RNVC: 2

20 Nov 2009

4730-14-346-7038
Bride Speciale

143467038
6784-1CP14: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-460-2734
Flange To Hose Straight Adapter

144602734
MAT300-01-02: RNCC: 3 | RNVC: 2

21 Jan 1993

4730-14-462-8447
Hose To Boss Straight Adapter

144628447
302589-01-01: RNCC: 3 | RNVC: 2

5 May 1993

4730-14-422-3631
Fluid Flow Restrictor

144223631
007-12-109: RNCC: 3 | RNVC: 2

2 Mar 1988

4730-14-355-5634
Tube To Boss Straight Adapter

143555634
12-25-26X34C0: RNCC: 3 | RNVC: 2
4A25-26-34C0: RNCC: 3 | RNVC: 2
MC25-33: RNCC: 3 | RNVC: 2
UMCA25X26-34N: RNCC: 3 | RNVC: 2

19 Mar 1979

4730-14-355-5573
Tube To Boss Straight Adapter

143555573
1DM25-30X200: RNCC: 3 | RNVC: 2
AA25X30-200N: RNCC: 3 | RNVC: 2

19 Mar 1979

4730-14-449-5535
Tube Union

144495535
RACCORD SOUD PAR EM L21,3: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-397-3776
Fluid Pressure Line Multiple Connector

143973776
13015070R: RNCC: 3 | RNVC: 2

18 Dec 1984

4730-14-214-1704

4730-14-298-0156

4730-14-345-9689

4730-14-363-9014
Pipe Fitting Assortment

143639014
003514005S: RNCC: 3 | RNVC: 2

7 Aug 1980

4730-14-450-5464
Pipe Flange

144505464
3500072: RNCC: 3 | RNVC: 2
HPI3500072: RNCC: 5 | RNVC: 2
91712899: RNCC: 5 | RNVC: 2

9 Oct 1991

4730-14-238-7393
Fluid Passage Bolt

142387393
5171082900: RNCC: 3 | RNVC: 2
109003: RNCC: 3 | RNVC: 2
710829: RNCC: 5 | RNVC: 2
02023316802: RNCC: 5 | RNVC: 2
MAF0001000847: RNCC: 6 | RNVC: 9

1 Jan 1967

4730-14-401-9015
Fluid Pressure Line Multiple Connector

144019015
DLT610073: RNCC: 3 | RNVC: 2

13 Jun 1985

4730-14-424-9686
Tube To Boss Straight Adapter

144249686
AS25SA3C: RNCC: 3 | RNVC: 2
AS25SA3C: RNCC: 3 | RNVC: 9
AS25PS: RNCC: 5 | RNVC: 9

16 Jun 1988

4730-14-268-6423

4730-14-399-9765
Sediment Strainer Element

143999765
601939: RNCC: 3 | RNVC: 2
N993-3: RNCC: 5 | RNVC: 2

24 Apr 1985

4730-14-569-1914
Hose Cap

145691914
14100040833: RNCC: 3 | RNVC: 2

18 Aug 2011

4730-14-556-6149
Pipe Flange

145566149
MDS31F003: RNCC: 3 | RNVC: 2

28 Mar 2008

4730-14-560-7893
Pipe Fitting Assortment

145607893
454355C: RNCC: 3 | RNVC: 2

26 May 2009

4730-14-449-4457
Pipe Expansion Joint

144494457
NO PRIMARY REF14-449-4457: RNCC: 3 | RNVC: 2
N25878: RNCC: 5 | RNVC: 9

19 Aug 1991

4730-14-417-7718
Tube To Boss Straight Adapter

144177718
Q15GE30S3/4BSPNU: RNCC: 3 | RNVC: 2
8401302766NU: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-212-1468
Tube Coupling Assembly

142121468
0-3601SB20A: RNCC: 3 | RNVC: 2
0-3601SB20A: RNCC: 5 | RNVC: 9
85-691-3833: RNCC: 6 | RNVC: 9

5 Jul 1980

4730-14-260-9105
Pipe Flange

142609105
7062CA1F1-36AF42-2: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-411-5910
Tube Coupling

144115910
HC102-1-10: RNCC: 3 | RNVC: 2

26 Aug 1986

4730-14-449-5432
Tube Coupling

144495432
EMBOUT A SOUDER EM S10,2: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-400-4283
Fluid Flow Restrictor

144004283
T0743331: RNCC: 3 | RNVC: 2
NO PRIMARY REF14-400-4283: RNCC: 3 | RNVC: 2
T07433-31: RNCC: 5 | RNVC: 2
P80WA: RNCC: 5 | RNVC: 9

24 Apr 1985

4730-14-231-0905
Tube To Boss Straight Adapter

142310905
Q15R12-10-18X1-5Z91: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-427-4524
Tube Tee

144274524
4730JCING355,6X20-219,1X12,5: RNCC: 2 | RNVC: 2

20 Oct 1988

4730-14-490-4288
Tube To Hose Straight Adapter

144904288
EPA23700-003PL4/4: RNCC: 3 | RNVC: 2

26 Sep 1997

4730-14-309-2270
Self-Sealing Coupling Half

143092270
9949211A: RNCC: 3 | RNVC: 2
TAHM155S4-712-5D: RNCC: 5 | RNVC: 2
9-94-92-11A: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-311-6802
Fluid Pressure Line Multiple Connector

143116802
702A30-3505-20: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-494-7028
Tube To Boss Straight Adapter

144947028
NO PRIMARY REF14-494-7028: RNCC: 3 | RNVC: 2
017977: RNCC: 5 | RNVC: 9
F300 0T 017 8034: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-432-6702
Hose To Boss Straight Adapter

144326702
4CD1094300102: RNCC: 3 | RNVC: 2
7947-133: RNCC: 5 | RNVC: 2

20 Jun 1989

4730-14-379-3064
Pipe Flange

143793064
E64-35-3200-122BF9-22ETF10-22DN-: RNCC: 3 | RNVC: 1

6 Sep 1982

4730-14-320-8629
Tube To Boss Straight Adapter

143208629
A6-73010: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-575-2920
Pipe Plug

145752920
MY20781-1503: RNCC: 3 | RNVC: 2

26 Mar 2013

4730-14-235-0906
Quick Disconnect Coupling Half

142350906
E29572D50BZ: RNCC: 2 | RNVC: 2
3000-50X60: RNCC: 3 | RNVC: 2
10-301-29: RNCC: 3 | RNVC: 2
707-50-50X60BR0NZE: RNCC: 5 | RNVC: 2
JEA16-47: RNCC: 5 | RNVC: 2
062075952: RNCC: 5 | RNVC: 9
75952: RNCC: 5 | RNVC: 9
G6701-05: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-453-6015
Fluid Pressure Line Multiple Connector

144536015
NO PRIMARY REF14-453-6015: RNCC: 3 | RNVC: 2
6013104276: RNCC: 5 | RNVC: 2
13DL15-18X150: RNCC: 5 | RNVC: 2

26 Feb 1992

4730-14-553-2235
Fuel Feeder Manifold

145532235
754-17740: RNCC: 3 | RNVC: 2

15 Mar 2007

4730-14-329-2822
Pipeline Flexible Spacer

143292822
DILAT0FLEXNTH150L150-10X22DP240: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-390-4082
Tube Tee

143904082
T25433-57: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-242-7663
Tube Coupling Inverted Nut

142427663
12604D: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-043-0255
Tube Coupling

140430255
PE60001K16: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-520-7837
Hose To Boss Straight Adapter

145207837
0020900029: RNCC: 3 | RNVC: 2

14 Jun 2000

4730-14-368-8163
Tube Fitting Clinch Sleeve

143688163
9124180050: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-489-8222
Tube To Boss Straight Adapter

144898222
E4750012: RNCC: 3 | RNVC: 9

22 Aug 1997

4730-14-287-0556
Pipe Flange

142870556
RUAN7625M913P8D: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-408-5033
Fluid Pressure Line Multiple Connector

144085033
9418061358: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-273-5030
Tube Coupling

142735030
7062BA1RPET1-8C337A: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-369-3136
Self-Sealing Coupling Assembly

143693136
432G04: RNCC: 3 | RNVC: 2
600140: RNCC: 5 | RNVC: 9

17 Apr 1981

4730-14-522-6249
Tube To Boss Straight Adapter

145226249
2601: RNCC: 3 | RNVC: 2
SOA2601: RNCC: 5 | RNVC: 9

8 Nov 2000

4730-14-532-4028
Fluid Pressure Line Multiple Connector

145324028
RA1M726210N1: RNCC: 3 | RNVC: 2

30 Oct 2002

4730-14-480-1958
Quick Disconnect Coupling Half

144801958
RBA06.1806/C: RNCC: 3 | RNVC: 2

27 Feb 1996

4730-14-405-9928
Tube To Boss Straight Adapter

144059928
8-05-060-17: RNCC: 3 | RNVC: 2

18 Dec 1985

4730-14-512-7309
Tu Droit Adaptateur

4730-14-262-1586
Pipe Flange

142621586
7062DJ1F1F25-3-5-14CD2-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-447-5515
Quick Disconnect Coupling Half

144475515
3803177: RNCC: 3 | RNVC: 2
NC 003 026 0: RNCC: 3 | RNVC: 2
NC003-026-0B: RNCC: 5 | RNVC: 2
3803177: RNCC: 5 | RNVC: 2
NC 003 026 0 B: RNCC: 5 | RNVC: 2

29 May 1991

4730-14-463-5808
Special-Shaped Hose Clamp

144635808
649-400-055-0: RNCC: 3 | RNVC: 2

17 Jun 1993

4730-14-335-5472
Tube To Boss Straight Adapter

143355472
610-304-009-0: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-464-9321
Raccords Ensemble

144649321
9970-133-090: RNCC: 3 | RNVC: 2

8 Sep 1993

4730-14-469-9755
Tube Union

144699755
NOR-UMCI13-12X17N: RNCC: 3 | RNVC: 2
NOR-UMCI13-12X17N: RNCC: 3 | RNVC: 9

20 May 1994

4730-14-404-0225
Bulkhead Hose Connector

144040225
300-710-303-0: RNCC: 3 | RNVC: 2
001700030A: RNCC: 5 | RNVC: 2

11 Sep 1985

4730-14-428-5037
Tube To Boss Straight Adapter

144285037
717.D.12.18X1,50: RNCC: 3 | RNVC: 2
P156D12: RNCC: 3 | RNVC: 2
717 D 12 18X1,50: RNCC: 5 | RNVC: 2
74717D12: RNCC: 5 | RNVC: 2
717D12: RNCC: 5 | RNVC: 2
717D12 18 150: RNCC: 5 | RNVC: 2
74717D12: RNCC: 5 | RNVC: 2
717D12-18X150: RNCC: 5 | RNVC: 2
717D1218150: RNCC: 5 | RNVC: 2

8 Dec 1988

4730-14-405-4123
Quick Disconnect Coupling Half

144054123
RBE06.2101/0D/IA/0/D/KJ: RNCC: 3 | RNVC: 2
91542615: RNCC: 5 | RNVC: 2
RBE6.2101/0D/IA/0/D/KJ: RNCC: 5 | RNVC: 2
91542615: RNCC: 5 | RNVC: 2

17 Sep 1997

4730-14-443-6738
Quick Disconnect Coupling Half

144436738
4-587421-8: RNCC: 3 | RNVC: 2
0686-02-40X45: RNCC: 3 | RNVC: 2
4-587421-8: RNCC: 5 | RNVC: 9
0686-02-40X45: RNCC: 5 | RNVC: 9

4 Dec 1990

4730-14-339-8097
Sediment Strainer Element

143398097
NO PRIMARY REF14-339-8097: RNCC: 3 | RNVC: 2
5-516-1REP3: RNCC: 5 | RNVC: 9

18 Jan 1977

4730-14-227-5645
Bouchon De Purge Eq

142275645
70-2537-01U: RNCC: 3 | RNVC: 9
902537: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-468-5901

4730-14-282-1926

4730-14-247-9879

4730-14-572-0228
Tube To Boss Straight Adapter

145720228
YDA.210.0775: RNCC: 3 | RNVC: 2
YDA.210.0775: RNCC: 5 | RNVC: 2

1 Jun 2012

4730-14-330-8843

4730-14-570-3587
Hose Coupling

145703587
NO PRIMARY REF 14-570-3587: RNCC: 3 | RNVC: 2
3213640H: RNCC: 5 | RNVC: 2

9 Dec 2011

4730-14-509-6249

4730-14-468-9663
Raccord Pour Tube

4730-14-269-1950

4730-14-561-7951
Pipe To Tube Elbow

145617951
EW28LREDOMDCF: RNCC: 3 | RNVC: 2
EW28LREDOMDCF: RNCC: 5 | RNVC: 9

8 Sep 2009

4730-14-557-8263
Tube Coupling Nut

145578263
ECS2080H100: RNCC: 1 | RNVC: 2
ECS2080H100: RNCC: 3 | RNVC: 2
ECS2080H100: RNCC: 3 | RNVC: 2

21 Jul 2008

4730-14-575-0218
Flange To Grooved Clamp Straight Adapter

145750218
M2852400420000: RNCC: 3 | RNVC: 2

7 Mar 2013

4730-14-339-2819
Fluid Pressure Line Multiple Connector

143392819
7910016434: RNCC: 3 | RNVC: 2
7910016434: RNCC: 3 | RNVC: 2
79-10-016-434: RNCC: 5 | RNVC: 9
26002490: RNCC: 5 | RNVC: 9

18 Jan 1977

4730-14-508-5689
Tube Coupling Assembly

145085689
AH099-00: RNCC: 3 | RNVC: 2

16 Sep 1998

4730-14-328-0447
Fluid Pressure Line Multiple Connector

143280447
826005-002: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-322-1717
Tube To Boss Straight Adapter

143221717
A6-71176: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-342-0590
Quick Disconnect Coupling Half

143420590
RBE11-6853: RNCC: 3 | RNVC: 2
RBE11-6853IA: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-363-6614
Bulkhead Hose Connector

143636614
773-425-110DET45: RNCC: 3 | RNVC: 2
773-425-106REP45: RNCC: 5 | RNVC: 9
773-425-110DET45: RNCC: 5 | RNVC: 9

6 Jul 1980

4730-14-380-5596
Quick Disconnect Coupling Half

143805596
3065S5-4D: RNCC: 3 | RNVC: 2
306555-4D: RNCC: 5 | RNVC: 2

29 Nov 1982

4730-14-321-9654
Bride A Zinc

143219654
GSM147-005F18: RNCC: 3 | RNVC: 2
GSM147-05F18: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-339-9027
Tube Coupling Assembly

143399027
0-3971S50X50X50X32A: RNCC: 3 | RNVC: 2
0-3971S50X50X50X32A: RNCC: 5 | RNVC: 9
85-688-9448: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-14-231-6258
Tube Union

142316258
EN10242-U11-1/4-ZN-A: RNCC: 2 | RNVC: 2
770340202: RNCC: 3 | RNVC: 2
770 340 202: RNCC: 5 | RNVC: 2
340 1-4Z: RNCC: 5 | RNVC: 2
E29801U5BZ: RNCC: 5 | RNVC: 9
262 1-4Z: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-458-3540
Tube To Boss Straight Adapter

144583540
LN329-017REP32: RNCC: 3 | RNVC: 2
LN329-017F18DN17,2 1/2"NPT: RNCC: 5 | RNVC: 2

20 Oct 1992

4730-14-426-7671
Tube Tee

144267671
4730HEING042,4X3,6-17,2X2: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-360-6647
Tube To Boss Straight Adapter

143606647
UMCA14X12-17LL: RNCC: 3 | RNVC: 2
LV117-CS1406LL: RNCC: 5 | RNVC: 2

19 Dec 1979

4730-14-536-8813
Tube Tee

145368813
84411-06: RNCC: 1 | RNVC: 2
RA7606: RNCC: 3 | RNVC: 2

17 Sep 2003

4730-14-362-0154
Tube Tee

143620154
TRK10X2-10N: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-454-3621
Fluid-Emulsion Spray Nozzle

144543621
18-0657: RNCC: 3 | RNVC: 2

1 Apr 1992

4730-14-504-9249
Ecouleme Diaphragme

4730-14-462-5840
Aut Raccord Complet

4730-14-289-9626

4730-14-377-2882
Hydrauli Connecteur

143772882
C24318000: RNCC: 3 | RNVC: 2
C24318000: RNCC: 5 | RNVC: 2

17 May 1982

4730-14-573-3858
Tube Union

145733858
ABS1491V24: RNCC: 1 | RNVC: 2
ABS1491V24: RNCC: 3 | RNVC: 2
ABS1491V24: RNCC: 5 | RNVC: 2

10 Oct 2012

4730-14-568-2484
Tube Union

145682484
NSA855111W6: RNCC: 1 | RNVC: 2
NSA855111W6: RNCC: 3 | RNVC: 2
NSA855111W6: RNCC: 5 | RNVC: 2

17 May 2011

4730-14-452-8600
Raccord Vs

144528600
GF90031: RNCC: 3 | RNVC: 2
GF90031: RNCC: 5 | RNVC: 2
GF90031: RNCC: 5 | RNVC: 9

22 Jan 1992

4730-14-535-3029
Tube Tee

145353029
10663647: RNCC: 3 | RNVC: 2

20 May 2003

4730-14-506-7977
Non-Metallic Connecting Sleeve

145067977
30877: RNCC: 3 | RNVC: 2
CAE01376: RNCC: 5 | RNVC: 2

20 May 1998

4730-14-369-4501
Sediment Strainer Element

143694501
M59330SD: RNCC: 3 | RNVC: 9

17 Apr 1981

4730-14-556-7386
Hose Tee

145567386
8131 1598: RNCC: 3 | RNVC: 2

8 Apr 2008

4730-14-366-5893

4730-14-363-5395

4730-14-370-7026
Ecrou-Racc Obturate

143707026
NO PRIMARY REF14-370-7026: RNCC: 3 | RNVC: 2
BUZ28L: RNCC: 5 | RNVC: 2
BUZ28L: RNCC: 5 | RNVC: 9

5 Jun 1981

4730-14-405-7848
Fluid Passage Bolt

144057848
NO PRIMARY REF14-405-7848: RNCC: 3 | RNVC: 2
906-132-1REP16: RNCC: 5 | RNVC: 9

4 Dec 1985

4730-14-537-4099
Tube Tee

145374099
FA167/772541: RNCC: 3 | RNVC: 2
772541: RNCC: 5 | RNVC: 2

3 Nov 2003

4730-14-563-8108
Pipe Reducer

145638108
RI11/2EDX1CF: RNCC: 3 | RNVC: 2
A231004000448: RNCC: 5 | RNVC: 2

18 Mar 2010

4730-14-562-9692
Hose Clamp

145629692
NO PRIMARY REF 14-562-9692: RNCC: 3 | RNVC: 2
VD60315: RNCC: 5 | RNVC: 2
FS0001199: RNCC: 6 | RNVC: 9

9 Dec 2009

4730-14-304-9184
Pipeline Flexible Spacer

143049184
812048: RNCC: 3 | RNVC: 2
ERV80-16ANNEAUJAUNEBRIDESIN0X: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-381-2871
Tube To Boss Straight Adapter

143812871
NO PRIMARY REF14-381-2871: RNCC: 3 | RNVC: 2
GA8LR: RNCC: 5 | RNVC: 2
6127479-083: RNCC: 5 | RNVC: 2
6127479083: RNCC: 5 | RNVC: 2
GA8LR: RNCC: 5 | RNVC: 9

25 Jan 1983

4730-14-474-1470
Tube Tee

144741470
813981: RNCC: 3 | RNVC: 2
X07372-40: RNCC: 5 | RNVC: 2

30 Jan 1995

4730-14-031-5020

4730-14-370-8746
Tube Tee

143708746
303-942-301-0: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-393-5630
Col De Cygne

143935630
MN7062RGF2/2: RNCC: 3 | RNVC: 9
MN7062RGF2-2: RNCC: 5 | RNVC: 9

7 Apr 1984

4730-14-511-8225
Fluid Pressure Line Multiple Connector

145118225
4-595001-5: RNCC: 3 | RNVC: 2
4730-65-0000045: RNCC: 6 | RNVC: 9

26 Jan 1999

4730-14-509-5829

4730-14-474-1273
Purge Adaptateur

4730-14-480-9609

4730-14-536-1685
Tube To Boss Straight Adapter

145361685
VA804106846: RNCC: 3 | RNVC: 2

10 Jul 2003

4730-14-438-5224
Flange To Tube Elbow

144385224
DA2C240731: RNCC: 3 | RNVC: 2

21 Mar 1990

4730-14-554-5857
Flange To Hose Elbow

145545857
0390730320: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-205-0397
Raccord Vabco

142050397
UMA44-5-1 1-2WC0: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-297-0412
Fluid Pressure Line Multiple Connector

142970412
121B77-100-01-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-387-5165
Bride Raccordement

143875165
GSM162-007F29: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-406-8982
Raccord Bullage

144068982
NO PRIMARY REF14-4068982: RNCC: 3 | RNVC: 2
54-5010-6: RNCC: 5 | RNVC: 2

14 Jan 1986

4730-14-369-6335
Quick Disconnect Coupling Half

143696335
PSO06-6806/1: RNCC: 3 | RNVC: 2
PS006-6806-1: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-442-7601
Tube To Boss Straight Adapter

144427601
4DS16/1/2RNU: RNCC: 3 | RNVC: 2
4DS16 1-2RCYNU: RNCC: 3 | RNVC: 9
568071: RNCC: 5 | RNVC: 2
4DS16/15-21RNU: RNCC: 5 | RNVC: 2
A07051709: RNCC: 5 | RNVC: 2
A07051709: RNCC: 5 | RNVC: 9
568071: RNCC: 5 | RNVC: 9
F300 0T 020 4977: RNCC: 6 | RNVC: 9

31 Oct 1990

4730-14-549-3392
Tube Fitting Clinch Sleeve

145493392
8207-1-4A: RNCC: 3 | RNVC: 2

23 Mar 2006

4730-14-427-8927
Tube Coupling

144278927
SKA38X471: RNCC: 3 | RNVC: 2
SKA38X471: RNCC: 3 | RNVC: 9
SKA38/1.4571: RNCC: 5 | RNVC: 9

19 Nov 1988

4730-14-261-7047
Toile Metallique

142617047
NO PRIMARY REF14-261-7047: RNCC: 3 | RNVC: 2
11K59: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-399-6559
Tube Tee

143996559
Q1-57-10: RNCC: 3 | RNVC: 2
TK10N: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-560-2565
Branched Tubing Connector

145602565
229-0707: RNCC: 3 | RNVC: 2

6 Apr 2009

4730-14-458-0857
Coude Pour Tube

4730-14-355-5332
Tube Coupling Assembly

143555332
3901SB16A: RNCC: 3 | RNVC: 2
3901SB16A: RNCC: 5 | RNVC: 9

19 Mar 1979

4730-14-231-1254
Fuel Feeder Manifold

142311254
0202127390: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-540-7500
Tube Tee

145407500
38051599: RNCC: 3 | RNVC: 2
ND065595: RNCC: 5 | RNVC: 2
4848ZG8613181347: RNCC: 6 | RNVC: 9

23 Apr 2004

4730-14-209-1389
Fluid Passage Bolt

142091389
B277999: RNCC: 3 | RNVC: 2
277999: RNCC: 5 | RNVC: 9
DBAB277999: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-450-4877
Fluid Passage Bolt

144504877
5172202900: RNCC: 3 | RNVC: 2

9 Oct 1991

4730-14-523-4004
Water Feeder Manifold

145234004
40602: RNCC: 3 | RNVC: 2

17 Jan 2001

4730-14-496-3672
Graisseur

144963672
182287: RNCC: 3 | RNVC: 2
F300 0T 021 4529: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-220-6118

4730-14-297-8939
Bloc De Derivation

142978939
411MA0162FA7: RNCC: 3 | RNVC: 2
411MA162FA7: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-565-4282
Tube To Boss Straight Adapter

145654282
GE12LM18X1,5EDOMDCF: RNCC: 3 | RNVC: 2
438597: RNCC: 5 | RNVC: 2
A231004000400: RNCC: 5 | RNVC: 2

18 Aug 2010

4730-14-339-9959
Barillet Prise Temp

143399959
411MA0322: RNCC: 3 | RNVC: 2
411MA322: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-356-6822

4730-14-574-7214
Special Nipple

145747214
56265870AA: RNCC: 3 | RNVC: 2

14 Feb 2013

4730-14-247-4748

4730-14-577-1807
Tube Elbow

145771807
70 12 20 52 19: RNCC: 3 | RNVC: 2

20 Aug 2013

4730-14-305-3590
Piston De Clapet

143053590
557810: RNCC: 3 | RNVC: 2
557810: RNCC: 5 | RNVC: 2
5155781000: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-559-4251
Pipe Union

145594251
P733200: RNCC: 3 | RNVC: 2

12 Jan 2009

4730-14-231-0722
Fourrure De Sertiss

142310722
FC1618: RNCC: 3 | RNVC: 2
FC16X18: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-221-7249
Joint Special Pour

142217249
JET16: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-374-9455
Raccord De Tu Ecrou

4730-14-346-7083
Plaque De Reduction

143467083
6784-1DH114-3-38: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-394-0501
Tube To Boss Straight Adapter

143940501
0000250570: RNCC: 3 | RNVC: 2
85-692-4347: RNCC: 6 | RNVC: 9

23 Jun 1984

4730-14-350-8359
Tube To Boss Straight Adapter

143508359
7062BB1VPT1-20C337: RNCC: 2 | RNVC: 2

12 Jul 1978

4730-14-397-9333
Tube To Gas Fitting Straight Adapter

143979333
G12-17-15-21C0NU: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-386-4385
Bulkhead Hose Connector

143864385
702A30-2427-00: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-471-6599
Tube To Boss Straight Adapter

144716599
002137514K: RNCC: 3 | RNVC: 2
K21375-14: RNCC: 5 | RNVC: 2

7 Sep 1994

4730-14-210-0885
Tube To Boss Straight Adapter

142100885
A12-71545: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-222-6545
Tube Fitting Brazing Ferrule

142226545
GSM1297F1AF1BTABLEAU2D1-20I13: RNCC: 3 | RNVC: 2

1 Jan 1966

Load More Results