What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 60 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 60 of 185

4730-14-424-1869
Flange To Hose Elbow

144241869
05423700: RNCC: 3 | RNVC: 2
D05423700: RNCC: 5 | RNVC: 2

19 May 1988

4730-14-553-6170
Tube Tee

145536170
TA8L: RNCC: 3 | RNVC: 2
930 135 020: RNCC: 3 | RNVC: 2

24 Apr 2007

4730-14-454-1078
Tube Fitting Flared Sleeve

144541078
60914743: RNCC: 3 | RNVC: 2
EDM0131AM1: RNCC: 5 | RNVC: 2
EDM0131AM001: RNCC: 5 | RNVC: 2
89231269: RNCC: 5 | RNVC: 2
89280506: RNCC: 5 | RNVC: 2

19 Mar 1992

4730-14-554-9141
Tube To Boss Straight Adapter

145549141
717013: RNCC: 3 | RNVC: 2

7 Sep 2007

4730-14-502-8102
Return Tube Bend

145028102
8T6684: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-503-3631
Tube Tee

145033631
5005130138: RNCC: 3 | RNVC: 2

14 Jan 1998

4730-14-525-2635
Fluid Passage Bolt

145252635
06470P045106: RNCC: 3 | RNVC: 2
03933700: RNCC: 3 | RNVC: 2

23 May 2001

4730-14-494-5545
Quick Disconnect Coupling Assembly

144945545
643 485 29: RNCC: 3 | RNVC: 2
F300 0T 017 4725: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-336-0170
Bulkhead Hose Connector

143360170
83641: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-298-3543
Tube To Boss Straight Adapter

142983543
534204: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-496-0978
Tube To Boss Straight Adapter

144960978
010370-04D: RNCC: 3 | RNVC: 2
F300 0T 020 8955: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-370-4554
Tube-Hose Fitting Compression Sleeve

143704554
0408-0505: RNCC: 3 | RNVC: 2
SAF0408-0505: RNCC: 5 | RNVC: 2

18 May 1981

4730-14-398-7230
Olive

143987230
98156-1326: RNCC: 3 | RNVC: 2

5 Feb 1985

4730-14-286-4961
Tube To Boss Straight Adapter

142864961
341A52-1009-20: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-390-6172
Tube To Boss Straight Adapter

143906172
RCN21-17-17: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-266-4976
Raccord

142664976
DSP65: RNCC: 3 | RNVC: 2
DSP65: RNCC: 5 | RNVC: 2
DSP65: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-564-6192
Hose Clamp

145646192
OE100200: RNCC: 3 | RNVC: 2

12 May 2010

4730-14-259-7277
Raccord Orientable

142597277
ES109-54: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-369-9087
Quick Disconnect Coupling Half

143699087
E29-573-7DOUILLEAG0RGELAITON: RNCC: 2 | RNVC: 2

18 May 1981

4730-14-231-0853
Bride Speciale

142310853
NO PRIMARY REF14-231-0853: RNCC: 3 | RNVC: 2
18330: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-516-4393
Tube Union

145164393
MAT162-0232F7REPD: RNCC: 3 | RNVC: 2
NO PRIMARY REF14-516-4393: RNCC: 3 | RNVC: 2
1850763: RNCC: 5 | RNVC: 2
GRIP L 76.1NBR INOX: RNCC: 5 | RNVC: 2

24 Sep 1999

4730-14-504-9071
Pipeline Flexible Spacer

145049071
DILATOFLEX-K-CC-DN25PN16: RNCC: 3 | RNVC: 2
ERV25-10ROUGE: RNCC: 3 | RNVC: 2
A1/25/KG310-WG/E/PN16: RNCC: 3 | RNVC: 2
ERV-DOUBLEROUGE-DN25PN16: RNCC: 3 | RNVC: 9

11 Mar 1998

4730-14-426-7956
Tube Tee

144267956
4730HEING168,3X11-114,3X8,8: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-305-9397
Joint De Dilatation

143059397
02528902300: RNCC: 3 | RNVC: 2
025289023: RNCC: 5 | RNVC: 2
207055-419061: RNCC: 5 | RNVC: 2
SR24-98/1: RNCC: 5 | RNVC: 2
SR77-98/1: RNCC: 5 | RNVC: 2
PC19940: RNCC: 5 | RNVC: 2
PC9385E: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-509-1653
Return Tube Bend

145091653
KQW06-U01: RNCC: 3 | RNVC: 2
ND2005: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-353-1084
Fluid Pressure Line Multiple Connector

143531084
C60-43: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-484-3592
Quick Disconnect Coupling Half

144843592
1685-20B: RNCC: 3 | RNVC: 2
1685B-DN20: RNCC: 5 | RNVC: 2

14 Nov 1996

4730-14-317-8134
Tube To Boss Straight Adapter

143178134
A1-65576: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-516-5204
Tube To Boss Straight Adapter

145165204
05 114 08 10: RNCC: 3 | RNVC: 2
412-G21-10: RNCC: 5 | RNVC: 2

29 Sep 1999

4730-14-345-9670
Tube To Boss Straight Adapter

143459670
UFK20-20X27: RNCC: 3 | RNVC: 2
Q1-53-20-21X27CYL: RNCC: 3 | RNVC: 2

5 Nov 1977

4730-14-562-5556
Hose Clamp

145625556
29 8 540 110: RNCC: 3 | RNVC: 2
298540110: RNCC: 5 | RNVC: 2

3 Nov 2009

4730-14-499-2603
Tube To Boss Straight Adapter

144992603
4DS12-3-8RNU: RNCC: 3 | RNVC: 2
4DS12 3-8RCYNU: RNCC: 3 | RNVC: 9
A07051712: RNCC: 5 | RNVC: 2
A07051712: RNCC: 5 | RNVC: 9
F300 0T 020 4976: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-483-8060
Tube Coupling Assembly

144838060
7-0016-500: RNCC: 3 | RNVC: 2
1110804K00: RNCC: 5 | RNVC: 2

3 Oct 1996

4730-14-482-1227
Bulkhead Hose Connector

144821227
7-0000-001: RNCC: 3 | RNVC: 2
1110820E00: RNCC: 5 | RNVC: 2

20 Jun 1996

4730-14-325-6228
Fluid Pressure Line Multiple Connector

143256228
121B71-606-00-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-419-5960
Nipple Inox

144195960
SVHN8-8EM: RNCC: 3 | RNVC: 9

21 Oct 1987

4730-14-215-2433
Raccord Special

142152433
7-43563: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-530-9085

4730-14-453-0998
Bouchon D Adaptatio

144530998
15110700Z: RNCC: 3 | RNVC: 2

5 Feb 1992

4730-14-395-3673
Embout A Souder

143953673
N0189F31A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-535-3224

4730-14-220-7214

4730-14-538-9660
Return Tube Bend

145389660
NGM0053226506547: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-226-8778

4730-14-365-7740
Tube To Boss Straight Adapter

143657740
G12-33-26-34CYLNU: RNCC: 3 | RNVC: 2
4AG33-26-34CYLNU: RNCC: 3 | RNVC: 2
UMAG33X26-34NNU: RNCC: 3 | RNVC: 2

8 Oct 1980

4730-14-416-5796
Quick Disconnect Coupling Half

144165796
RBS11-1816: RNCC: 3 | RNVC: 2

18 Jun 1987

4730-14-560-7187
Pipe Flange

145607187
STCM-00-032-07-100-100: RNCC: 3 | RNVC: 2

19 May 2009

4730-14-542-0423
Fluid Passage Bolt

145420423
21214034-122: RNCC: 3 | RNVC: 2
502108004015A: RNCC: 3 | RNVC: 9
2121 4034-122: RNCC: 5 | RNVC: 2

2 Jul 2004

4730-14-461-0749
Quick Disconnect Coupling Half

144610749
WA06334-57: RNCC: 3 | RNVC: 2
WA0633457: RNCC: 5 | RNVC: 2

23 Feb 1993

4730-14-362-5802
Tube To Boss Straight Adapter

143625802
492-15023: RNCC: 3 | RNVC: 2
492-15023: RNCC: 3 | RNVC: 9

19 Mar 1980

4730-14-221-9756
Bouchon Dhuile

142219756
NO PRIMARY REF14-221-9756: RNCC: 3 | RNVC: 2
291M521773: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-557-5943
Straight Tubing Connector

145575943
MAT388-0104-F1: RNCC: 3 | RNVC: 2

25 Jun 2008

4730-14-554-7888
Fluid-Emulsion Spray Nozzle

145547888
7501-0221: RNCC: 3 | RNVC: 2

23 Aug 2007

4730-14-296-8106
Tube To Boss Straight Adapter

142968106
00375-38: RNCC: 3 | RNVC: 2
C00375-38: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-450-4064
Quick Disconnect Coupling Half

144504064
PIO06-6810: RNCC: 3 | RNVC: 2
PIO6-6810: RNCC: 5 | RNVC: 2

4 Oct 1991

4730-14-494-5530
Tube To Boss Straight Adapter

144945530
643 461 203: RNCC: 3 | RNVC: 2
F300 0T 017 4709: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-516-2682
Quick Disconnect Plug

145162682
TA5012P002: RNCC: 3 | RNVC: 2

15 Sep 1999

4730-14-411-4860
Tube Tee

144114860
TSI30M: RNCC: 3 | RNVC: 9

6 Aug 1986

4730-14-382-9053
Tube Coupling

143829053
XMAV8PSR: RNCC: 3 | RNVC: 2
XMAV8PSR: RNCC: 5 | RNVC: 2

17 Mar 1983

4730-14-447-8418
Tube Tee

144478418
11A16X150CO: RNCC: 3 | RNVC: 2
5005030204: RNCC: 5 | RNVC: 2
211L15134: RNCC: 5 | RNVC: 2

6 Jun 1991

4730-14-031-6153
Tube Union

140316153
MAT164-0355F8: RNCC: 3 | RNVC: 2
GSM164-023F8: RNCC: 5 | RNVC: 2

14 Jun 1980

4730-14-278-0847
Diaphragme

142780847
NO PRIMARY REF14-278-0847: RNCC: 3 | RNVC: 2
127K514: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-510-8693
Hydraulic Manifold Assembly

145108693
2-81-2-00-01-E: RNCC: 3 | RNVC: 2

18 Nov 1998

4730-14-489-3683
Quick Disconnect Coupling Half

144893683
RBE19-1105/OD/IC/9: RNCC: 3 | RNVC: 2

11 Jul 1997

4730-14-464-4997
De Pression Prise

144644997
854-700-027-0: RNCC: 3 | RNVC: 2

4 Aug 1993

4730-14-260-9127
Pipe Flange

142609127
7062CB1F1-48AF42-2: RNCC: 2 | RNVC: 2
4730CD-48,3: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-456-0750
Tube To Boss Straight Adapter

144560750
LN329-017F18DE33,7G1 1/4A EQ: RNCC: 3 | RNVC: 2
RAR1535: RNCC: 5 | RNVC: 2
LN329-017REP86: RNCC: 5 | RNVC: 2

17 Jun 1992

4730-14-315-7826
Tube To Boss Straight Adapter

143157826
773-413-043FF14DET78: RNCC: 3 | RNVC: 2
773-413-043FF14DET78: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-438-0009
Hose To Boss Straight Adapter

144380009
4A10-16X150C0NU: RNCC: 3 | RNVC: 2
204105161NU: RNCC: 5 | RNVC: 2
5005030064: RNCC: 5 | RNVC: 2
82131310NU: RNCC: 5 | RNVC: 2
204L05161NU: RNCC: 5 | RNVC: 2

5 Mar 1990

4730-14-419-8377
Fluid Pressure Line Multiple Connector

144198377
9T6-10SMK90: RNCC: 3 | RNVC: 2

5 Nov 1987

4730-14-389-4539
Tube Coupling

143894539
365A54-1036-00Z: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-381-1278
Tube To Boss Straight Adapter

143811278
12 16 27 150NU: RNCC: 3 | RNVC: 2
12-16-27X150NU: RNCC: 5 | RNVC: 2
34-356: RNCC: 5 | RNVC: 2
P2-12-16-27X150NU: RNCC: 5 | RNVC: 2
P4-12-16-27X150NU: RNCC: 5 | RNVC: 2

25 Jan 1983

4730-14-458-0764
Bride Equipee

144580764
NH38608-1-2-3-5-6-79697: RNCC: 3 | RNVC: 2

7 Oct 1992

4730-14-204-4034

4730-14-031-3415
Tube Tee

140313415
160-632253: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-439-5502
Tube To Boss Straight Adapter

144395502
2725023MI: RNCC: 3 | RNVC: 2

14 May 1990

4730-14-272-0853
Tube Union

142720853
SUD0341GCU22 3/4: RNCC: 3 | RNVC: 9
1310-3-223: RNCC: 5 | RNVC: 2
341GCU22 3/4: RNCC: 5 | RNVC: 2
SUD0341GCU22 3/4: RNCC: 5 | RNVC: 2
SUD0341GCU22-3-4: RNCC: 5 | RNVC: 2
341GCU22 3/4: RNCC: 5 | RNVC: 2
341GCU22-3-4: RNCC: 5 | RNVC: 9
1310-3-223: RNCC: 5 | RNVC: 9
341GCU22 3/4: RNCC: 5 | RNVC: 9
SUD0341GCU22 3/4: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-500-6255
Tube To Boss Straight Adapter

145006255
EMA3-10X1ORA3C: RNCC: 3 | RNVC: 2
EMA 3-M 10X1 0RA3C: RNCC: 5 | RNVC: 2
EMA3M10X1 0RA3C: RNCC: 5 | RNVC: 2
F300 0T 024 6439: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-309-4973
Tube To Boss Straight Adapter

143094973
52-16 3-4BGS: RNCC: 3 | RNVC: 2
UMA16X3-4BGSN: RNCC: 3 | RNVC: 2
4A16 3-4BGS: RNCC: 3 | RNVC: 2
ML16-12B: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-301-0038
Fluid Pressure Line Multiple Connector

143010038
121A71-131-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-448-7411
Pipe Flange

144487411
4730HP-1DE21,3: RNCC: 2 | RNVC: 2
Y07134-02-0000P001DE21,3: RNCC: 3 | RNVC: 2

9 Jul 1991

4730-14-354-6456
Tube To Boss Straight Adapter

143546456
Q1-52-20-3-4BGS: RNCC: 3 | RNVC: 2

31 Jan 1979

4730-14-286-3082

4730-14-264-4930

4730-14-334-1260
Fluid Pressure Line Multiple Connector

143341260
880-77-0-012-0: RNCC: 3 | RNVC: 2
85-688-2064: RNCC: 6 | RNVC: 9

23 Apr 1976

4730-14-485-1260
Tube Union

144851260
3EB01445/7: RNCC: 3 | RNVC: 2
DAH3EB01445/7: RNCC: 5 | RNVC: 9

10 Jan 1997

4730-14-387-3582
Fluid Pressure Line Multiple Connector

143873582
DA2C751200101: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-300-7503
Tube Tee

143007503
GSM523-026F25: RNCC: 3 | RNVC: 2
411MA127FA9: RNCC: 5 | RNVC: 2
GSM523-26F25: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-368-3205
Fluid Pressure Line Multiple Connector

143683205
R00443-82: RNCC: 3 | RNVC: 2
2102660: RNCC: 5 | RNVC: 2
2102660: RNCC: 5 | RNVC: 2

20 Feb 1981

4730-14-268-5142
Return Tube Bend

142685142
A49183C57ASJ: RNCC: 2 | RNVC: 2
5D180-57MM: RNCC: 3 | RNVC: 2
E29-045-57MM180: RNCC: 5 | RNVC: 2
5D180-57MM: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-451-0445
Quick Disconnect Coupling Half

144510445
02240901200: RNCC: 3 | RNVC: 2
450450-00: RNCC: 5 | RNVC: 2

28 Oct 1991

4730-14-482-6044
Hose To Gas Fitting Straight Adapter

144826044
GA70940-0610: RNCC: 3 | RNVC: 2

18 Jul 1996

4730-14-477-3985
Tube Coupling

144773985
706A34-424-005: RNCC: 1 | RNVC: 2
793C06S06TZ2: RNCC: 3 | RNVC: 2
793C06S06TZ2: RNCC: 5 | RNVC: 9

23 Aug 1995

4730-14-282-1294
Tube Tee

142821294
262-12-71151-66: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-423-4545
Pipe Flange

144234545
UA50088006PN100-11D1SDN200: RNCC: 2 | RNVC: 2
4730HCPN100DN20011D1S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-313-6748
Fluid Pressure Line Multiple Connector

143136748
7S8-12-90K: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-525-1708
Air Hose Connector

145251708
062050A: RNCC: 3 | RNVC: 2
06450P003003: RNCC: 3 | RNVC: 2

23 May 2001

4730-14-540-5367
Tube To Boss Straight Adapter

145405367
P4 12 12TF 16: RNCC: 3 | RNVC: 2

1 Apr 2004

4730-14-213-1074
Tube To Boss Straight Adapter

142131074
9782080334: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-375-9595
Fluid Pressure Line Multiple Connector

143759595
NO PRIMARY REF14-375-9595: RNCC: 3 | RNVC: 2
404111411: RNCC: 5 | RNVC: 9
404111411: RNCC: 5 | RNVC: 9

30 Mar 1982

4730-14-285-1930
Tube To Boss Straight Adapter

142851930
262-10-74111-01: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-525-6303
Return Tube Bend

145256303
236-913-2130: RNCC: 3 | RNVC: 2
20 236 913 2130: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-457-5723
Flange To Hose Straight Adapter

144575723
247-20-16: RNCC: 3 | RNVC: 2
89467764: RNCC: 5 | RNVC: 2

10 Sep 1992

4730-14-333-4351
Raccord De Drainage

143334351
006A387: RNCC: 3 | RNVC: 2
85-800-5567: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-234-0781
Equerre De Cloison

142340781
507-10: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-422-0794
Pipe Flange

144220794
MN6784-2DC38: RNCC: 3 | RNVC: 9

22 Feb 1988

4730-14-403-7253
Tube To Boss Straight Adapter

144037253
NO PRIMARY REF14-403-7253: RNCC: 3 | RNVC: 2
C18GG0021-901: RNCC: 5 | RNVC: 9

21 Aug 1985

4730-14-449-5498
Tube Union

144495498
RACCORD IMP R1/4 BB S13,5: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-330-6511
Traversee Manchette

143306511
BN347-501-57: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-516-3082
Pipeline Flexible Spacer

145163082
B1/400/KG320-WG/PN16/E: RNCC: 3 | RNVC: 2
B1/400/KG320-WG/PN16/E: RNCC: 5 | RNVC: 2

20 Sep 1999

4730-14-553-1152
Tube To Boss Straight Adapter

145531152
GE12LR1-4EDOMDCF: RNCC: 3 | RNVC: 2
437514: RNCC: 5 | RNVC: 2
GE12LR1-4EDOMDCF: RNCC: 5 | RNVC: 9

5 Mar 2007

4730-14-537-8946
Quick Disconnect Coupling Half

145378946
RBE06.1101/IC/0/VD: RNCC: 3 | RNVC: 2
18573204-7: RNCC: 5 | RNVC: 2

3 Dec 2003

4730-14-374-1376
Tube Tee

143741376
723.B.08.12.12S: RNCC: 3 | RNVC: 2
P166B081212S: RNCC: 3 | RNVC: 2
DHS613-643-39: RNCC: 5 | RNVC: 2
723 B 08 12 12S: RNCC: 5 | RNVC: 2
723B08 12 12S: RNCC: 5 | RNVC: 2
723B08-12-12S: RNCC: 5 | RNVC: 2
723B081212S: RNCC: 5 | RNVC: 2
74723B081212S: RNCC: 5 | RNVC: 2
74723B081212S: RNCC: 5 | RNVC: 2

8 Dec 1981

4730-14-430-1668
Hose To Boss Straight Adapter

144301668
AF151-08/IC: RNCC: 3 | RNVC: 2

8 Mar 1989

4730-14-428-9467
Pipe Flange

144289467
4730JAPN150DN125-11D1S-10: RNCC: 2 | RNVC: 2

28 Dec 1988

4730-14-299-8485
Tube To Boss Straight Adapter

142998485
4730AJUNI0NMALERBSM10X100CA10: RNCC: 2 | RNVC: 2
4CA10-10X100NU: RNCC: 3 | RNVC: 2
Q1-52-10-10X100NU: RNCC: 3 | RNVC: 2
GSM164-014F9: RNCC: 3 | RNVC: 2
UMK10X10-100NNU: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-380-8970
Tube Coupling

143808970
1311-606-01-00: RNCC: 3 | RNVC: 2
13116010122: RNCC: 5 | RNVC: 2
1311-601-01-22: RNCC: 5 | RNVC: 2

14 Dec 1982

4730-14-339-0958
Bulkhead Hose Connector

143390958
GSM425-004F37: RNCC: 3 | RNVC: 2
GSM425-04F37: RNCC: 5 | RNVC: 2

17 Dec 1976

4730-14-503-3047
Tube Coupling

145033047
1307F6: RNCC: 3 | RNVC: 2
1307-F6: RNCC: 5 | RNVC: 2

9 Jan 1998

4730-14-423-4766
Pipe Flange

144234766
UA50088006PN100-11LSFDN80: RNCC: 2 | RNVC: 2
4730HCPN100DN08011LSF: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-563-8068
Tube To Boss Straight Adapter

145638068
GE16SR3/4CF: RNCC: 3 | RNVC: 2

17 Mar 2010

4730-14-465-2526
Tube Repair Plug

144652526
38608: RNCC: 3 | RNVC: 2
RAQ0458: RNCC: 5 | RNVC: 2

21 Sep 1993

4730-14-267-3113
Tube Tee

142673113
0243858880: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-389-4148
Hose To Boss Straight Adapter

143894148
0500337: RNCC: 3 | RNVC: 2
6169970: RNCC: 5 | RNVC: 2
FOE0500337: RNCC: 5 | RNVC: 9

20 Dec 1983

4730-14-399-3318
Tube To Boss Straight Adapter

143993318
742PN06: RNCC: 3 | RNVC: 2
742PN06: RNCC: 3 | RNVC: 2
74742PN06: RNCC: 5 | RNVC: 2

6 Mar 1985

4730-14-313-7615
Bulkhead Hose Connector

143137615
0210160150: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-496-4783
Tube To Boss Straight Adapter

144964783
476812: RNCC: 3 | RNVC: 2
F300 0T 021 5735: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-336-9207

4730-14-435-6816
Bulkhead Hose Connector

144356816
60300610: RNCC: 3 | RNVC: 2
300610: RNCC: 5 | RNVC: 9

17 Nov 1989

4730-14-335-0413
Tube To Boss Straight Adapter

143350413
ECHC400F95: RNCC: 3 | RNVC: 2

2 Jun 1976

4730-14-465-5409
Fluid Flow Restrictor Unit

144655409
GA58651: RNCC: 3 | RNVC: 2

30 Sep 1993

4730-14-325-6812
Bulkhead Hose Connector

143256812
0000365700: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-536-1504
Straight Tubing Connector

145361504
4518-5123: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-417-7734
Tube To Boss Straight Adapter

144177734
Q15GE30SM33200: RNCC: 3 | RNVC: 2
8401309166NU: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-414-6616
Tube Fitting Socket Welded Ferrule

144146616
4730HK-EME26,9X2: RNCC: 2 | RNVC: 2
MEC10475: RNCC: 3 | RNVC: 2

20 Feb 1987

4730-14-325-9063
Pipe Flange

143259063
AS34TV106REP14: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-384-3348
Threaded Tube Fitting Plug

143843348
RT13015: RNCC: 3 | RNVC: 2
85-692-3100: RNCC: 6 | RNVC: 9

4 May 1983

4730-14-398-5801
Tube Tee

143985801
GSM164-025F33: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-361-7115
Tube To Boss Straight Adapter

143617115
W00375-33: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-259-5166
Pipe Flange

142595166
RU761-43M621-1P17: RNCC: 3 | RNVC: 2
761-43M621-1P17: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-302-9920
Tube To Boss Straight Adapter

143029920
7062BB1B1966VCPT2-41-5UA9C337: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-334-9114
Bulkhead Hose Connector

143349114
RM312: RNCC: 3 | RNVC: 2
R5712PR5112PR5312: RNCC: 5 | RNVC: 2
85-687-3026: RNCC: 6 | RNVC: 9

2 Jun 1976

4730-14-346-7027
Pipe Flange

143467027
6784-1CH8-6A: RNCC: 2 | RNVC: 2
MEC11355: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-383-9606
Fluid Passage Bolt

143839606
NO PRIMARY REF14-383-9606: RNCC: 3 | RNVC: 2
Z21890: RNCC: 5 | RNVC: 9

4 May 1983

4730-14-398-5929
Tube Fitting Brazing Ferrule

143985929
4730AMF3PN100DE30: RNCC: 2 | RNVC: 2
MAT164-0354F5ZONEB: RNCC: 3 | RNVC: 2
GSM164-057F5Z0NEB: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-453-3031
Tube Coupling

144533031
5449815: RNCC: 3 | RNVC: 2
60003205: RNCC: 5 | RNVC: 2
85-694-5613: RNCC: 6 | RNVC: 9

12 Feb 1992

4730-14-452-1518
Tube To Boss Straight Adapter

144521518
A580-006: RNCC: 3 | RNVC: 2

18 Dec 1991

4730-14-375-5223
Tube To Boss Straight Adapter

143755223
4-6F4OMXS: RNCC: 3 | RNVC: 2
4-6F4OMXS: RNCC: 3 | RNVC: 2
F40XS6 3-8: RNCC: 5 | RNVC: 2
F40XS6-3-8: RNCC: 5 | RNVC: 2
F40XS6-3/8: RNCC: 5 | RNVC: 2

26 Feb 1982

4730-14-536-0996
Tube To Gas Fitting Straight Adapter

145360996
01050814: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-230-6044
Tube Tee

142306044
17-8NNRR: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-296-7834
Tube To Boss Straight Adapter

142967834
0075020: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-521-1368

4730-14-499-4147
Tube To Boss Straight Adapter

144994147
A07051715: RNCC: 3 | RNVC: 2
4DL6 1-4RNU: RNCC: 3 | RNVC: 9
A07051715: RNCC: 5 | RNVC: 9
F300 0T 022 0239: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-390-6679
Embout A Souder

143906679
8867200047: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-509-1121

4730-14-222-6546
Tube Fitting Brazing Ferrule

142226546
GSM1297F1AF1BTABLEAU2D1-20I12: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-349-2423
Tube To Boss Straight Adapter

143492423
310112117-02: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-041-2016
Sediment Strainer Element

140412016
30-421-13-19: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-333-5184
Barillet A 6 Voies

143335184
GSM163-007BF41: RNCC: 3 | RNVC: 2
GSM163-07BF41: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-559-3896
Hose Clamp

145593896
NSA5522-092-112: RNCC: 1 | RNVC: 2
25-2-060-006: RNCC: 3 | RNVC: 2
NSA5522-092-112: RNCC: 5 | RNVC: 2
MINOXM5: RNCC: 5 | RNVC: 9
MINOXM5: RNCC: 5 | RNVC: 9

6 Jan 2009

4730-14-481-4003
Tube Fitting Clinch Sleeve

144814003
BAGUESERTISSAGEDIAM51/55L30TUYAU: RNCC: 3 | RNVC: 2

3 May 1996

4730-14-317-8070
Tube Coupling Nut Assembly

143178070
E-JET39P: RNCC: 3 | RNVC: 2
EJET39P: RNCC: 5 | RNVC: 2
KE-JET39P: RNCC: 5 | RNVC: 2
EJET39: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-387-8889
Tube Tee

143878889
789.B.12.12T.12: RNCC: 3 | RNVC: 2
789B12-12T12: RNCC: 5 | RNVC: 2
789B1212T12: RNCC: 5 | RNVC: 2
74789B1212T12: RNCC: 5 | RNVC: 2
789 B 12 12T 12: RNCC: 5 | RNVC: 2
789B12 12T12: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-260-2137
Raccord Special

142602137
SK17603M18-150: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-555-7738
Fluid Passage Bolt

145557738
0235237910: RNCC: 3 | RNVC: 2

13 Dec 2007

4730-14-554-5935
Flange To Tube Elbow

145545935
0000371440: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-402-1905
Tube Fitting Flared Sleeve

144021905
TXS30: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-503-1752
Bulkhead Hose Connector

145031752
RA1M534303230: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-396-3995
Tube Coupling

143963995
AURA25X16NU: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-202-5303
Tube Tee

142025303
RA6408: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-414-4974
Tube To Boss Straight Adapter

144144974
8401218947NU: RNCC: 3 | RNVC: 2

4 Feb 1987

4730-14-523-1025
Fluid Pressure Line Multiple Connector

145231025
TB3030803: RNCC: 3 | RNVC: 2

22 Dec 2000

4730-14-385-7209
Tube To Boss Straight Adapter

143857209
44145: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-382-8796
Tube To Boss Straight Adapter

143828796
PE40301K06: RNCC: 3 | RNVC: 2

2 Aug 2000

4730-14-497-3757
Fluid Flow Restrictor Unit

144973757
4300754: RNCC: 3 | RNVC: 2
5303294: RNCC: 5 | RNVC: 2
5303294: RNCC: 5 | RNVC: 9
4300754: RNCC: 5 | RNVC: 9
F300 0T 023 0828: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-306-9911
Tube Coupling

143069911
E29029ZG: RNCC: 2 | RNVC: 2
000566282S: RNCC: 3 | RNVC: 2
0UT1-140: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-497-6868
Tube To Boss Straight Adapter

144976868
7K2780: RNCC: 3 | RNVC: 2
F300 0T 023 4915: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-251-0833

4730-14-375-5625
Embase A Manche

143755625
7008-150: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-541-1469
Tube Tee

145411469
23824379-00: RNCC: 3 | RNVC: 2
23824379-1: RNCC: 5 | RNVC: 2

14 May 2004

4730-14-539-3440
Fluid Pressure Line Multiple Connector

145393440
NO PRIMARY REF14-539-3440: RNCC: 3 | RNVC: 2
153086: RNCC: 5 | RNVC: 2
QSLV-1/8-4: RNCC: 5 | RNVC: 2
AA004727: RNCC: 6 | RNVC: 9

7 Jan 2004

4730-14-449-5525
Tube Tee

144495525
TE EGAL EMBOUT BB L33,7: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-350-4035
Sediment Strainer Element

143504035
1186-02: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-255-4798
Raccord A Bride Spe

142554798
321A55-0213-01: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-231-1572
Fluid Passage Bolt

142311572
12160652: RNCC: 3 | RNVC: 2
3560-10XC18CD: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-208-8171
Fluid Pressure Line Multiple Connector

142088171
509-14NNNU: RNCC: 3 | RNVC: 2
0946755914: RNCC: 5 | RNVC: 2
946755914NU: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-494-7010
Tube To Boss Straight Adapter

144947010
NO PRIMARY REF14-494-7010: RNCC: 3 | RNVC: 2
0171879: RNCC: 5 | RNVC: 9
F300 0T 017 8009: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-407-4295
Tube Tee

144074295
18-20-21-27CO: RNCC: 3 | RNVC: 2
TMCA20X20-27N: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-425-2511
Tube Tee

144252511
LL300-CK14S: RNCC: 3 | RNVC: 2

28 Jun 1988

4730-14-500-6282
Tube To Boss Straight Adapter

145006282
XGE28-LMA3C: RNCC: 3 | RNVC: 2
XGE28LMA3C: RNCC: 3 | RNVC: 2
F300 0T 024 6467: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-202-9715

4730-14-557-5510
Tube To Gas Fitting Straight Adapter

145575510
5010631413: RNCC: 1 | RNVC: 2
86110910: RNCC: 3 | RNVC: 2

20 Jun 2008

4730-14-545-0641
Tube Tee

145450641
01582121: RNCC: 3 | RNVC: 2
19215238: RNCC: 3 | RNVC: 2

16 Mar 2005

4730-14-556-4492
Pipe Flange

145564492
2A 2 E EF 558300 001 2/5 DN64: RNCC: 3 | RNVC: 2

10 Mar 2008

4730-14-545-2326
Fluid Flow Restrictor

145452326
FL17542: RNCC: 3 | RNVC: 2

26 Mar 2005

4730-14-308-6458
Pipe Flange

143086458
0235020140: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-526-9003
Pipe Flange

145269003
02136001000: RNCC: 3 | RNVC: 2

13 Sep 2001

4730-14-509-1640
Tube To Boss Straight Adapter

145091640
KQT08-U02: RNCC: 3 | RNVC: 2
ND1665: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-419-8988
Tube To Hose Straight Adapter

144198988
NO PRIMARY REF14-419-8988: RNCC: 3 | RNVC: 2
011-11355: RNCC: 5 | RNVC: 9

10 Nov 1987

4730-14-505-3612
Fluid Pressure Line Multiple Connector

145053612
WH10-PLR-KD-0MD: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-261-7178
Pipe Flange

142617178
NO PRIMARY REF14-261-7178: RNCC: 3 | RNVC: 2
114H807: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-389-5091
Bulkhead Hose Connector

143895091
365A72-1286-01: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-398-5880
Tube Tee

143985880
GSM164-054F14: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-274-6610
Tube-Hose Fitting Compression Sleeve

142746610
7062CE1F4B36-175UE10R1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-284-6890
Sediment Strainer Element

142846890
C32BB0101-052: RNCC: 3 | RNVC: 2
C32BB0101-052: RNCC: 5 | RNVC: 2
C32BB0101-052: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-227-7900
Lubrication Fitting

142277900
NO PRIMARY REF14-227-7900: RNCC: 3 | RNVC: 2
11H15: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-361-0117
Tube To Boss Straight Adapter

143610117
GSM164-024F9: RNCC: 3 | RNVC: 2
MAT164-0315F4: RNCC: 3 | RNVC: 2

19 Dec 1979

4730-14-461-4713
Sediment Strainer Element

144614713
000-161-112: RNCC: 3 | RNVC: 2

10 Mar 1993

4730-14-418-0453
Fluid Pressure Line Multiple Connector

144180453
13-230-02: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-262-1797

4730-14-541-2743

4730-14-509-5410

4730-14-283-5524
Raccord

142835524
340323: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-040-2897
Raccord Dinjection

140402897
RT11196: RNCC: 3 | RNVC: 2
RT11196: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-237-7612

4730-14-405-1485
Te Pour Tube

4730-14-536-0114

4730-14-530-9081

4730-14-317-4800
Raccord Sphe Embout

143174800
L4730-01F2-3-5: RNCC: 2 | RNVC: 2
4730AE-EMBOUT30: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-267-7836
Quick Disconnect Coupling Half

142677836
9959312: RNCC: 3 | RNVC: 2
VDPM02945: RNCC: 5 | RNVC: 2
5602-6-6: RNCC: 5 | RNVC: 9
9-95-93-12: RNCC: 5 | RNVC: 9
9959312: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-503-2109
Tube Tee

145032109
723.T.10.12.10S: RNCC: 3 | RNVC: 2
P166T101210S: RNCC: 3 | RNVC: 2
723 T 10 12 10S: RNCC: 5 | RNVC: 2
723T10 12 10S: RNCC: 5 | RNVC: 2
723T10-12-10S: RNCC: 5 | RNVC: 2
723T101210S: RNCC: 5 | RNVC: 2
74723T101210S: RNCC: 5 | RNVC: 2
74723T101210S: RNCC: 5 | RNVC: 2

7 Jan 1998

4730-14-276-6393
Equerre Orientable

142766393
Q1-5509-8-8X125NN: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-517-7416
Threaded Tube Fitting Plug

145177416
851-290-001-0: RNCC: 3 | RNVC: 2

5 Jan 2000

4730-14-374-1377
Tube Tee

143741377
723.B.10.06.10S: RNCC: 3 | RNVC: 2
P166B100610S: RNCC: 3 | RNVC: 2
DHS613-643-43: RNCC: 5 | RNVC: 2
723 B 10 06 10S: RNCC: 5 | RNVC: 2
723B10 06 10S: RNCC: 5 | RNVC: 2
723B10-06-10S: RNCC: 5 | RNVC: 2
723B100610S: RNCC: 5 | RNVC: 2
74723B100610S: RNCC: 5 | RNVC: 2
74723B100610S: RNCC: 5 | RNVC: 2

8 Dec 1981

4730-14-465-7051
Tube Union

144657051
191076-2: RNCC: 3 | RNVC: 2
191076-2: RNCC: 5 | RNVC: 2

8 Oct 1993

4730-14-346-4562
Bouchon Blocage Man

143464562
C193AVECP0USS0IR: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-223-2343

4730-14-252-6143

4730-14-393-9173
Raccor Siege Mobile

143939173
435-30: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-237-1381
Bouchon Filete

142371381
NO PRIMARY REF14-237-1381: RNCC: 3 | RNVC: 2
87597: RNCC: 5 | RNVC: 9
00-360-8143: RNCC: 6 | RNVC: 9

1 Jan 1967

4730-14-325-8889

4730-14-491-2817
Fluid Passage Bolt

144912817
6F300 0T 002 3427: RNCC: 3 | RNVC: 2
F300 0T 002 1323: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-553-9959
Tube To Boss Straight Adapter

145539959
156 328: RNCC: 3 | RNVC: 2
156 328: RNCC: 3 | RNVC: 2

6 Jun 2007

4730-14-367-0492

4730-14-288-6501

4730-14-293-4233
Fluid Pressure Line Multiple Connector

142934233
F751-013: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-216-1155
Fluid Pressure Line Multiple Connector

142161155
14009AAA: RNCC: 3 | RNVC: 2
F454-12DEA: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-328-0342
Pipe Flange

143280342
11220180Y: RNCC: 3 | RNVC: 2
22-018: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-435-3787
Quick Disconnect Coupling Half

144353787
RBE3-7150IA3HP: RNCC: 3 | RNVC: 2

8 Nov 1989

4730-14-252-5165
Tube Fitting Clinch Sleeve

142525165
605-36: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-244-7729
Tube To Boss Straight Adapter

142447729
Q01-42-6-5-10C0NU: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-213-5824
Tube Tee

142135824
5-3901S20A: RNCC: 3 | RNVC: 2
5-3901S20ARS6: RNCC: 5 | RNVC: 9
300201-20AARS6: RNCC: 5 | RNVC: 9
3901S20AAR56: RNCC: 5 | RNVC: 9
5-3901S20A: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-430-4352
Tube Tee

144304352
BN329-512TEEG88,9-3,05: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-448-1692
Tube Tee

144481692
A10-14-250-84-0: RNCC: 3 | RNVC: 2
A10-14-250-84-0: RNCC: 5 | RNVC: 2
85-801-2783: RNCC: 6 | RNVC: 9

12 Jun 1991

4730-14-504-7374
Quick Disconnect Coupling Half

145047374
GPL15-1103: RNCC: 3 | RNVC: 2

2 Mar 1998

4730-14-430-4355
Tube Tee

144304355
BN329-512TEEG114,3-3,05: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-541-8337
Tube Tee

145418337
88179-1301: RNCC: 3 | RNVC: 2

26 Jun 2004

4730-14-383-0914
Tube To Boss Straight Adapter

143830914
9970-126-264: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-459-4549
Bouchon

144594549
MAT007-01-01: RNCC: 3 | RNVC: 2

1 Dec 1992

4730-14-346-7090
Bride Speciale

143467090
6784-1DR50: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-040-5357
Quick Disconnect Coupling Assembly

140405357
15176B/AA: RNCC: 3 | RNVC: 2
15176BAA: RNCC: 3 | RNVC: 9
15176BAA: RNCC: 5 | RNVC: 2
15176AAA: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-501-9587
Pipe Flange

145019587
332A54-2618-00: RNCC: 3 | RNVC: 2

19 Nov 1997

4730-14-407-6956
Pipeline Flexible Spacer

144076956
NO PRIMARY REF14-407-6956: RNCC: 3 | RNVC: 2
0329-1302-320-5: RNCC: 5 | RNVC: 9

27 Feb 1986

4730-14-253-0991
Bouchon Filete Spec

142530991
202035: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-530-0859
Pipe Fitting Assortment

145300859
41149: RNCC: 3 | RNVC: 2

14 May 2002

4730-14-494-4763
Tube To Boss Straight Adapter

144944763
T52 797 00: RNCC: 3 | RNVC: 2
F300 0T 017 3812: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-325-8998
Pipe Flange

143258998
AS34TV105REP9: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-434-7252
Tube Fitting Flared Sleeve

144347252
BN324595DN125AC: RNCC: 3 | RNVC: 2

3 Oct 1989

4730-14-449-7298
Pipe Elbow Assembly

144497298
721B933: RNCC: 3 | RNVC: 2
89232745: RNCC: 5 | RNVC: 2

4 Sep 1991

4730-14-537-0444
Special-Shaped Hose Clamp

145370444
CFCD1 25 80 W1: RNCC: 3 | RNVC: 2

24 Sep 2003

4730-14-575-7727
Flange To Tube Straight Adapter

145757727
M2811344000000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-225-1060
Bouchon Filete Racc

142251060
185P488: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-262-1468

4730-14-214-1551

4730-14-437-9869
Fluid Pressure Line Multiple Connector

144379869
13DL08-1-4Z: RNCC: 3 | RNVC: 2
750010003: RNCC: 5 | RNVC: 2
434510: RNCC: 5 | RNVC: 2
6013Z51112: RNCC: 5 | RNVC: 2

5 Mar 1990

4730-14-527-1046
Tube Tee

145271046
21228424-00: RNCC: 3 | RNVC: 2
21228424-9: RNCC: 5 | RNVC: 2

3 Oct 2001

4730-14-501-2362
Tube To Boss Straight Adapter

145012362
471-103: RNCC: 3 | RNVC: 2
471.103: RNCC: 3 | RNVC: 2
F300 0T 025 2767: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-433-6337
Straight Tubing Connector

144336337
6269-59180: RNCC: 3 | RNVC: 2

2 Aug 1989

4730-14-438-5856
Tube To Boss Straight Adapter

144385856
LL130-CK08S: RNCC: 3 | RNVC: 2
8376080066: RNCC: 5 | RNVC: 2

27 Mar 1990

4730-14-259-8846
Fluid Passage Bolt

142598846
321A39-0124-22: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-414-6526
Tube Tee

144146526
LL8450-08-67UK: RNCC: 3 | RNVC: 2
8450086766NU: RNCC: 5 | RNVC: 2

20 Feb 1987

4730-14-382-7047
Tube Tee

143827047
702A30-5500-14: RNCC: 3 | RNVC: 2
702A-30.5500-14: RNCC: 5 | RNVC: 2

17 Feb 1983

4730-14-536-1012
Tube To Boss Straight Adapter

145361012
2816-G21-12: RNCC: 3 | RNVC: 2
2816G21-12: RNCC: 5 | RNVC: 2

9 Jul 2003

4730-14-471-7104
Bulkhead Hose Connector

144717104
LN327-01515DN65: RNCC: 3 | RNVC: 2

13 Sep 1994

4730-14-400-4485
Tube To Boss Straight Adapter

144004485
GSM164-063F19: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-494-6995
Tube To Boss Straight Adapter

144946995
NO PRIMARY REF14-494-6995: RNCC: 3 | RNVC: 2
0171527: RNCC: 5 | RNVC: 9
F300 0T 017 7988: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-500-9231
Exhaust-Intake Pneumatic Muffler

145009231
4357-0016: RNCC: 3 | RNVC: 2
F300 0T 024 9440: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-262-1610

4730-14-223-8653

4730-14-339-9934

4730-14-572-3253
Union Thread Piece

145723253
332A72-1896-21: RNCC: 3 | RNVC: 2
332A72189621: RNCC: 5 | RNVC: 2

25 Jun 2012

4730-14-560-5076
Fluid-Emulsion Spray Nozzle

145605076
TPU2506-SS: RNCC: 3 | RNVC: 2
2506-SS: RNCC: 5 | RNVC: 2

27 Apr 2009

4730-14-229-8288

4730-14-298-8184

4730-14-308-8753

4730-14-571-0962
Flange To Tube Straight Adapter

145710962
M2821316620000: RNCC: 3 | RNVC: 2

20 Feb 2012

4730-14-339-1065
Tube To Boss Straight Adapter

143391065
SP8-00-07-83: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-382-8029
Fluid Pressure Line Multiple Connector

143828029
502-508-048-6: RNCC: 3 | RNVC: 2
502-508-048-0: RNCC: 3 | RNVC: 2
85-692-2367: RNCC: 6 | RNVC: 9

17 Feb 1983

4730-14-321-5529
Pipe Flange

143215529
M10-67-48-3: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-206-0950
Raccord A Selfobtur

142060950
CDC65029: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-325-8984
Pipe Flange

143258984
AS34T103REP5: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-305-4852
Fuel Feeder Manifold

143054852
0264757910: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-540-5517
Tube To Boss Straight Adapter

145405517
19214054: RNCC: 3 | RNVC: 2

2 Apr 2004

4730-14-504-3127
Tube-Pipe Fitting Kit

145043127
3759308M91: RNCC: 3 | RNVC: 2

11 Feb 1998

4730-14-273-6039
Fluid Pressure Line Multiple Connector

142736039
11112: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-457-8920
Tube Tee

144578920
4730JCEG033,7X04,5: RNCC: 2 | RNVC: 2

26 Sep 1992

4730-14-480-2149
Tube Tee

144802149
111--3/8: RNCC: 3 | RNVC: 2

28 Feb 1996

4730-14-415-1981
Tube Tee

144151981
4730HEEG033,7X2,3: RNCC: 2 | RNVC: 2
U1238F12DE33,7X2,3: RNCC: 5 | RNVC: 2

17 Apr 1987

4730-14-415-1996
Tube Tee

144151996
4730HEEG042,4X2,6: RNCC: 2 | RNVC: 2
U1238F12DE42,4X2,6: RNCC: 5 | RNVC: 2

17 Apr 1987

4730-14-421-5764
Quick Disconnect Coupling Half

144215764
9681-42-55X60: RNCC: 3 | RNVC: 2
9681-42-55X60: RNCC: 5 | RNVC: 9
85-692-6610: RNCC: 6 | RNVC: 9

20 Jan 1988

4730-14-415-2045
Tube Tee

144152045
4730HDEG088,9X3,2: RNCC: 2 | RNVC: 2
U1238F12DE88,9X3,2: RNCC: 5 | RNVC: 2

17 Apr 1987

4730-14-539-1951
Quick Disconnect Coupling Half

145391951
NC 402 003 0: RNCC: 3 | RNVC: 2

11 Dec 2003

4730-14-276-7075
Tube To Boss Straight Adapter

142767075
3C50-8: RNCC: 3 | RNVC: 2
RL8: RNCC: 3 | RNVC: 2
RL8: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-459-5839
Tuyau

144595839
35599: RNCC: 3 | RNVC: 9
92ZF026-5-5: RNCC: 5 | RNVC: 2

10 Dec 1992

4730-14-541-4956
Tube Coupling

145414956
RBE11-7153IAJE: RNCC: 3 | RNVC: 2

10 Jun 2004

4730-14-396-0734
Tube Coupling Inverted Nut

143960734
101 6/8ACIER: RNCC: 3 | RNVC: 2
101 6-8ACIER: RNCC: 5 | RNVC: 2
0946737100: RNCC: 5 | RNVC: 2

27 Nov 1984

4730-14-378-6618
Tube Fitting Clinch Sleeve

143786618
4730AB4.6DN8: RNCC: 2 | RNVC: 2
6016012449: RNCC: 3 | RNVC: 2
84240800: RNCC: 5 | RNVC: 2
LL001-CS08S: RNCC: 5 | RNVC: 2

11 Aug 1982

4730-14-299-6235
Tube To Boss Straight Adapter

142996235
611-110-026-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-443-4865
Quick Disconnect Coupling Half

144434865
RBE06-1808/0/FB: RNCC: 3 | RNVC: 2

26 Nov 1990

4730-14-537-7491
Tube Coupling

145377491
20-7-E-30CA-3344-017-001REP4: RNCC: 3 | RNVC: 2

19 Nov 2003

4730-14-237-5540
Raccord Special

142375540
RP18C13-33: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-390-0055
Threaded Tube Fitting Plug

143900055
DHS613-582-22: RNCC: 3 | RNVC: 2
N7640268172: RNCC: 5 | RNVC: 2

26 Jan 1984

4730-14-334-2499
Tube Tee

143342499
GSM163-015F32: RNCC: 3 | RNVC: 2
GSM163-15F32: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-454-1450
Tube To Boss Straight Adapter

144541450
LN329-017REP77: RNCC: 3 | RNVC: 2
LN329-017F16DN10,2G1/4"A EQ: RNCC: 5 | RNVC: 2

21 Mar 1992

4730-14-355-5566

4730-14-339-9946

4730-14-518-0117
Tube Union

145180117
5005330256: RNCC: 3 | RNVC: 2

21 Jan 2000

4730-14-219-7776

4730-14-314-4303

4730-14-397-9409
Tube Tee

143979409
17-35-2TF: RNCC: 3 | RNVC: 2
TA35N2NE: RNCC: 3 | RNVC: 2
10A352NE: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-484-5092
Tube To Boss Straight Adapter

144845092
6218222000: RNCC: 3 | RNVC: 2
AA6X8-13N: RNCC: 5 | RNVC: 2

21 Nov 1996

4730-14-526-0528
Flange To Tube Straight Adapter

145260528
307-918-203-0: RNCC: 3 | RNVC: 2

28 Jun 2001

4730-14-376-3015
Tube Tee

143763015
TK6N: RNCC: 3 | RNVC: 2
Q1-57-6: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-561-5886
Sediment Strainer Element

145615886
095600001: RNCC: 3 | RNVC: 2
095600001: RNCC: 3 | RNVC: 2
FS0001866: RNCC: 6 | RNVC: 9

31 Jul 2009

4730-14-557-8798
Pipe Flange

145578798
FHS62CFX: RNCC: 3 | RNVC: 2
FHS62CF: RNCC: 3 | RNVC: 9
A231004000168: RNCC: 5 | RNVC: 2

24 Jul 2008

4730-14-365-9478

4730-14-236-4527

4730-14-209-1254
Quick-Disconnect Nipple

142091254
215423: RNCC: 3 | RNVC: 2
215423: RNCC: 5 | RNVC: 2
215423: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-508-0443
Tube Tee

145080443
0248251: RNCC: 3 | RNVC: 2

26 Aug 1998

4730-14-495-2565
Tube To Boss Straight Adapter

144952565
0000719726: RNCC: 3 | RNVC: 2
F300 0T 018 7743: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-377-1733
Tube To Boss Straight Adapter

143771733
42-8P8X13C0NU: RNCC: 3 | RNVC: 2
0024331102: RNCC: 5 | RNVC: 2
0024331102: RNCC: 5 | RNVC: 9
24331102: RNCC: 5 | RNVC: 9

17 May 1982

4730-14-287-6839
Tube To Boss Straight Adapter

142876839
13525590D: RNCC: 3 | RNVC: 2
52559: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-494-0317
Bulkhead Hose Connector

144940317
MA 00278 42: RNCC: 3 | RNVC: 2
MA0027842: RNCC: 5 | RNVC: 2
F300 0T 015 0959: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-457-3568
Tube Fitting Clinch Sleeve

144573568
1A18L: RNCC: 3 | RNVC: 2
91640620: RNCC: 5 | RNVC: 2
5005030008: RNCC: 5 | RNVC: 2

27 Aug 1992

4730-14-300-6233

4730-14-365-2874

4730-14-299-1319

4730-14-338-8770
Tube-Hose Fitting Compression Sleeve

143388770
9932061000: RNCC: 3 | RNVC: 2
650-794-053-0: RNCC: 5 | RNVC: 2

17 Dec 1976

4730-14-449-8981
Fluid Passage Bolt

144498981
77720220A: RNCC: 3 | RNVC: 2

11 Sep 1991

4730-14-549-3626
Quick-Disconnect Nipple

145493626
997: RNCC: 3 | RNVC: 2

27 Mar 2006

4730-14-536-1665
Tube Fitting Clinch Sleeve

145361665
7103605: RNCC: 3 | RNVC: 9

10 Jul 2003

4730-14-388-5053
Tube To Boss Straight Adapter

143885053
417998: RNCC: 3 | RNVC: 9

3 Nov 1983

4730-14-347-1175
Quick Disconnect Coupling Half

143471175
5011: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-503-3207
Tube Coupling

145033207
025439971: RNCC: 3 | RNVC: 2

9 Jan 1998

4730-14-244-6890

4730-14-571-5727
Tube Coupling Assembly

145715727
FR-26044011077: RNCC: 3 | RNVC: 2
26044011077: RNCC: 5 | RNVC: 2

10 Apr 2012

4730-14-472-0735
Tube To Boss Straight Adapter

144720735
4A10L-16X150C0NU: RNCC: 3 | RNVC: 2
104105161NU: RNCC: 5 | RNVC: 2

5 Oct 1994

4730-14-350-1359
Pipe Flange

143501359
7062TC1F1F38UA9NFEM: RNCC: 2 | RNVC: 2
4730CE-38F: RNCC: 5 | RNVC: 2

14 Jun 1978

4730-14-383-8688
Bulkhead Hose Connector

143838688
64353280001BREPAAH-F7A13-23DN40: RNCC: 3 | RNVC: 2

11 Apr 1983

4730-14-338-2501
Tube Fitting Brazing Ferrule

143382501
U1198F5-25UE8: RNCC: 2 | RNVC: 2
CN1: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-466-5958
Quick Disconnect Coupling Half

144665958
RBE06-2808IAFBDKNW: RNCC: 3 | RNVC: 2
85-694-9573: RNCC: 6 | RNVC: 9

17 Nov 1993

4730-14-507-0303
Quick Disconnect Coupling Half

145070303
RBE11-7813/IC/FB/JV/OD/HP: RNCC: 3 | RNVC: 2

3 Jun 1998

4730-14-448-8167
Tube To Gas Fitting Straight Adapter

144488167
LL154-CS0604S: RNCC: 3 | RNVC: 2

10 Jul 1991

4730-14-253-8024
Fluid Pressure Line Multiple Connector

142538024
G109-27-33X150NU: RNCC: 3 | RNVC: 2
DLT021992: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-397-0242
Quick Disconnect Coupling Half

143970242
RBE06-1153/OD/IC/HP/VS/SP: RNCC: 3 | RNVC: 2
RBE06-1153-0DICHPVSSP: RNCC: 5 | RNVC: 2

1 Dec 1984

4730-14-434-8758
Flange To Tube Elbow

144348758
GSM166-009F19: RNCC: 3 | RNVC: 2

6 Oct 1989

4730-14-494-7006
Tube To Boss Straight Adapter

144947006
NO PRIMARY REF14-494-7006: RNCC: 3 | RNVC: 2
0171840: RNCC: 5 | RNVC: 9
F300 0T 017 8003: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-381-5376
Tube To Boss Straight Adapter

143815376
2962-0064: RNCC: 3 | RNVC: 2
SAF2962-0064: RNCC: 5 | RNVC: 9

25 Jan 1983

4730-14-430-6008
Raccordement Embout

144306008
703700-01: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-239-4988

4730-14-520-6755
Raccord Bicone Doub

145206755
15100330C: RNCC: 3 | RNVC: 2

30 May 2000

4730-14-564-7772
Hydraulic Manifold Assembly

145647772
E14984: RNCC: 3 | RNVC: 2

4 Jun 2010

4730-14-220-6144
Tube Tee

142206144
R7614: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-495-3645
Anchor And Reinforcement Pipe Clamp

144953645
P4024267D: RNCC: 3 | RNVC: 2
B8260198: RNCC: 5 | RNVC: 2
D40242-67: RNCC: 5 | RNVC: 2
F300 0T 019 1362: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-559-3911
Hose Clamp

145593911
NSA5522-137-157: RNCC: 1 | RNVC: 2
25-2-060-009: RNCC: 3 | RNVC: 2
NSA5522-137-157: RNCC: 5 | RNVC: 2
MINOXM8: RNCC: 5 | RNVC: 9
MINOXM8: RNCC: 5 | RNVC: 9

6 Jan 2009

4730-14-277-6549
Pipe Flange

142776549
6784-1CC10-8: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-328-9585
Tube Tee

143289585
10RCA36X14X36NU: RNCC: 3 | RNVC: 2
Q1-5TR36X14X36NNNU: RNCC: 3 | RNVC: 2
R1-5TR36X14X36NNNU: RNCC: 3 | RNVC: 2
GSM164-012F39: RNCC: 3 | RNVC: 2
TRK36X14X36NNU: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-427-0346
Pipe Flange

144270346
MAT162-0022DN200FEM: RNCC: 3 | RNVC: 2
MAT162-0022F20: RNCC: 3 | RNVC: 2

5 Oct 1988

4730-14-302-4735
Fluid Pressure Line Multiple Connector

143024735
3180S54-10-064: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-225-0566
Embout

142250566
JEA16-59: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-503-2216
Tube Coupling

145032216
RP2M502116502: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-492-1847
Tube To Boss Straight Adapter

144921847
0000417138: RNCC: 3 | RNVC: 2

8 Oct 1997

4730-14-362-0857
Pipe Expansion Joint

143620857
XMT511625: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-360-4138
Fluid Passage Bolt

143604138
52S1002103: RNCC: 3 | RNVC: 2
52S1002103: RNCC: 5 | RNVC: 2

23 Nov 1979

4730-14-299-2849
Bulkhead Hose Connector

142992849
0000240370: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-395-3740
Tube To Boss Straight Adapter

143953740
N0188F21A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-358-8299
Tube To Boss Straight Adapter

143588299
421707: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-252-2947
Tube To Boss Straight Adapter

142522947
155084: RNCC: 3 | RNVC: 2
155084: RNCC: 5 | RNVC: 2
155084: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-396-5818
Tube To Boss Straight Adapter

143965818
UMAG17X21X21: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-506-7252
Bulkhead Hose Connector

145067252
UCSI8: RNCC: 3 | RNVC: 9
CAE01332: RNCC: 5 | RNVC: 2

13 May 1998

4730-14-543-5482
Tube Coupling Assembly

145435482
0301537210: RNCC: 3 | RNVC: 2
0 301 53 721 0: RNCC: 5 | RNVC: 2

19 Nov 2004

4730-14-550-2270
Tube Fitting Socket Welded Ferrule

145502270
3341: RNCC: 3 | RNVC: 9

12 Jun 2006

4730-14-502-5979
Tube Tee

145025979
5005130301: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-551-4115
Quick Disconnect Coupling Half

145514115
64309008: RNCC: 3 | RNVC: 2

18 Sep 2006

4730-14-431-9631
Tube To Boss Straight Adapter

144319631
1142324000: RNCC: 3 | RNVC: 2
91675447: RNCC: 5 | RNVC: 2
DAH1142324000: RNCC: 5 | RNVC: 9

18 May 1989

4730-14-409-1431
Quick Disconnect Plug

144091431
112-11303-81-131: RNCC: 3 | RNVC: 2
92E0542: RNCC: 5 | RNVC: 2

16 Apr 1986

4730-14-355-8563
Tube To Boss Straight Adapter

143558563
1-398-193: RNCC: 3 | RNVC: 2

5 Apr 1979

4730-14-500-4695
Flange To Boss Elbow

145004695
WFS34/28LOMDA3C: RNCC: 3 | RNVC: 2
WFS34/28LOMDA3C: RNCC: 3 | RNVC: 9
WFS34/28-PLOMDA3C: RNCC: 5 | RNVC: 9
F300 0T 024 4864: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-562-6307
Tube Elbow

145626307
CRB201720111U2: RNCC: 3 | RNVC: 2

10 Nov 2009

4730-14-308-0652

4730-14-294-0678
Quick Disconnect Coupling Half

142940678
E29572B100BZ: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-306-6503
Fluid Pressure Line Multiple Connector

143066503
R012: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-288-5964
Pipe Flange

142885964
RK5831DN50REP4: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-440-3955
Hose To Boss Straight Adapter

144403955
95MS215: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-481-2027
Tube Tee

144812027
46020319: RNCC: 3 | RNVC: 2

25 Apr 1996

4730-14-437-5330
Fluid Pressure Line Multiple Connector

144375330
220450000: RNCC: 3 | RNVC: 9

7 Feb 1990

4730-14-405-7130
Tube To Boss Straight Adapter

144057130
6741: RNCC: 3 | RNVC: 2
P1106: RNCC: 5 | RNVC: 2

4 Dec 1985

4730-14-519-4770
Tube-Hose Fitting Compression Sleeve

145194770
1DL12Z: RNCC: 3 | RNVC: 2
76101900: RNCC: 5 | RNVC: 2
434573: RNCC: 5 | RNVC: 9

22 Mar 2000

4730-14-548-0234
Tube To Hose Straight Adapter

145480234
460690K: RNCC: 3 | RNVC: 2

6 Dec 2005

4730-14-287-7907
Pipe Flange

142877907
RUAN7625M913P11D: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-476-7072
Tube To Boss Straight Adapter

144767072
101162941510: RNCC: 3 | RNVC: 2

28 Jun 1995

4730-14-031-9998

4730-14-243-6114

4730-14-365-3388

4730-14-348-1146
Raccord Tourn Corps

143481146
A77153-2: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-467-5379
Quick Disconnect Coupling Half

144675379
SDM R 1: RNCC: 3 | RNVC: 2
890605 SDM R 1: RNCC: 5 | RNVC: 2

17 Jan 1994

4730-14-314-5661
Tube To Boss Straight Adapter

143145661
3B50-6: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-479-1818
Tube Fitting Socket Welded Ferrule

144791818
FI 4.11.63.01: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-466-3311
Tube Coupling

144663311
0-3751PS25A: RNCC: 3 | RNVC: 2
0-3751PS25A: RNCC: 5 | RNVC: 9

3 Nov 1993

4730-14-467-3008
Lubrication Fitting

144673008
730-M10X1,5: RNCC: 3 | RNVC: 2

4 Jan 1994

4730-14-508-8031
Tube Tee

145088031
3.50523.0: RNCC: 3 | RNVC: 2

30 Sep 1998

4730-14-520-2953
Tube To Boss Straight Adapter

145202953
2055.8.8: RNCC: 3 | RNVC: 2

17 May 2000

4730-14-552-4694
Quick Disconnect Coupling Assembly

145524694
251725504A00: RNCC: 3 | RNVC: 2
25172550-4: RNCC: 5 | RNVC: 2

5 Jan 2007

4730-14-227-6272
Raccord Union Speci

142276272
MA2 1-2: RNCC: 3 | RNVC: 2
DLT022432: RNCC: 5 | RNVC: 2
DLT22432: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-415-2033
Tube Tee

144152033
4730HEEG076,1X2,9: RNCC: 2 | RNVC: 2
U1238F12DE76,1X2,9: RNCC: 5 | RNVC: 2

17 Apr 1987

4730-14-460-2081
Fluid Pressure Line Multiple Connector

144602081
509-8/JE12X100: RNCC: 3 | RNVC: 2

15 Jan 1993

4730-14-420-5034
Raccordement Cone

144205034
19RA16-12: RNCC: 3 | RNVC: 2

10 Dec 1987

4730-14-469-6931
Tube To Gas Fitting Straight Adapter

144696931
G8-101-2908: RNCC: 3 | RNVC: 2
85-694-7472: RNCC: 6 | RNVC: 9

4 May 1994

4730-14-517-3052
Quick Disconnect Coupling Half

145173052
481RTRT-14-14-8-500: RNCC: 3 | RNVC: 2
481RTRT-14-14-8-500: RNCC: 3 | RNVC: 9
481-2RT42-14-12,7: RNCC: 5 | RNVC: 9
481RTRT-8-A050: RNCC: 5 | RNVC: 9

1 Dec 1999

4730-14-501-7763
Tube To Boss Straight Adapter

145017763
SMK20-G1/4-VB: RNCC: 3 | RNVC: 2

7 Nov 1997

4730-14-516-0025
Tube To Boss Straight Adapter

145160025
309-070-801-0: RNCC: 3 | RNVC: 2

1 Sep 1999

4730-14-565-3148
Tube Tee

145653148
5005130242: RNCC: 1 | RNVC: 2
888 L 35311: RNCC: 3 | RNVC: 2
25312409: RNCC: 5 | RNVC: 2

9 Aug 2010

4730-14-385-7099
Tube To Boss Straight Adapter

143857099
270GCU16 3-4: RNCC: 3 | RNVC: 2
270GC16 3-4: RNCC: 3 | RNVC: 9

26 Jul 1983

4730-14-337-8229
Corps De Raccord

143378229
82350: RNCC: 3 | RNVC: 2
650-485-245-0: RNCC: 5 | RNVC: 2

6 Nov 1976

4730-14-577-1189
Tube Tee

145771189
ABS0790C12: RNCC: 1 | RNVC: 2
ABS0790C12: RNCC: 3 | RNVC: 2
ABS0790C12: RNCC: 5 | RNVC: 2

8 Aug 2013

4730-14-291-3985
Fluid Pressure Line Multiple Connector

142913985
0268160110: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-350-7308
Tube Coupling

143507308
1030882038: RNCC: 3 | RNVC: 2
1030882038: RNCC: 5 | RNVC: 2

12 Jul 1978

4730-14-334-8436
Tube To Boss Straight Adapter

143348436
BN324503: RNCC: 3 | RNVC: 2

2 Jun 1976

4730-14-347-8867
Bulkhead Hose Connector

143478867
0000241500: RNCC: 3 | RNVC: 2

1 Mar 1978

4730-14-351-2442
Tube Fitting Flared Sleeve

143512442
T23UMAB10-14: RNCC: 3 | RNVC: 2
0024255258: RNCC: 5 | RNVC: 2

10 Aug 1978

4730-14-400-8177
Fluid Pressure Line Multiple Connector

144008177
D35-7N06MF: RNCC: 3 | RNVC: 2
9560137980: RNCC: 5 | RNVC: 2

21 May 1985

4730-14-432-6310
Tube To Boss Straight Adapter

144326310
1415-714-10: RNCC: 3 | RNVC: 2

16 Jun 1989

4730-14-327-3118
Self-Sealing Coupling Half

143273118
3160S73-37-914: RNCC: 3 | RNVC: 2
85-672-0220: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-454-2042
Fluid-Emulsion Spray Nozzle

144542042
09-0200: RNCC: 3 | RNVC: 2

26 Mar 1992

4730-14-455-6336
Self-Sealing Coupling Assembly Parts Kit

144556336
N010-277-89: RNCC: 3 | RNVC: 2
N01027789: RNCC: 5 | RNVC: 2

3 Jun 1992

4730-14-563-3299
Manual Deaerator

145633299
102743: RNCC: 3 | RNVC: 2
3SK02978-102743: RNCC: 5 | RNVC: 2

26 Jan 2010

4730-14-423-4534
Pipe Flange

144234534
UA50088006PN100-11D1SDN80: RNCC: 2 | RNVC: 2
4730HCPN100DN08011D1S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-429-1759
Tube Tee

144291759
P4-17-12NU: RNCC: 3 | RNVC: 2

11 Jan 1989

4730-14-415-2440
Tube Tee

144152440
4730HDING114,3X3,6-48,3X2,6: RNCC: 2 | RNVC: 2
U1238F25DE114,3X3,6ETDE48,3X2,6: RNCC: 5 | RNVC: 2

21 Apr 1987

4730-14-428-5102
Fluid Pressure Line Multiple Connector

144285102
732.B.06: RNCC: 3 | RNVC: 2
P432B06: RNCC: 3 | RNVC: 2
164880: RNCC: 5 | RNVC: 2
732 B 06: RNCC: 5 | RNVC: 2
732B06: RNCC: 5 | RNVC: 2
74732B06: RNCC: 5 | RNVC: 2
74732B06: RNCC: 5 | RNVC: 2

8 Dec 1988

4730-14-333-6702
Tube To Boss Straight Adapter

143336702
12-35 3-4BGS: RNCC: 3 | RNVC: 2

23 Apr 1976

4730-14-386-9212
Fluid Passage Bolt

143869212
2-010458-7: RNCC: 3 | RNVC: 2
2-010458-7: RNCC: 5 | RNVC: 9

24 Aug 1983

4730-14-462-0248
Quick Disconnect Coupling Half

144620248
A77381-5: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-558-9881
Suction Strainer

145589881
UPH115: RNCC: 3 | RNVC: 2

26 Nov 2008

4730-14-273-5341
Pipe Flange

142735341
7062TC1F1M66UA9NFEM: RNCC: 2 | RNVC: 2
4730CE-66M: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-488-2885
Tube Fitting Clinch Sleeve

144882885
5003.531: RNCC: 3 | RNVC: 2

28 Apr 1997

4730-14-283-5507
Flexible Tube Coupling Assembly

142835507
DHS613-211.18: RNCC: 1 | RNVC: 2
L12-03: RNCC: 3 | RNVC: 2
DHS613-211-18: RNCC: 5 | RNVC: 2
L12-0-3: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-261-8463

Load More Results