What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 54 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 54 of 185

4730-14-217-3573

4730-14-365-2896

4730-14-376-4173

4730-14-267-8878
Tube To Boss Straight Adapter

142678878
1251-08: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-577-1245
Pipe Elbow

145771245
NSA855020-12E: RNCC: 1 | RNVC: 2
NSA855020-12E: RNCC: 3 | RNVC: 2
NSA855020-12E: RNCC: 5 | RNVC: 2

12 Aug 2013

4730-14-412-4002
Bulkhead Hose Connector

144124002
LN326-013F6ET7DN10CU-AL: RNCC: 3 | RNVC: 2

15 Oct 1986

4730-14-269-0967
Tube Fitting Clinch Sleeve

142690967
Q1-605-16: RNCC: 3 | RNVC: 2
DK16N: RNCC: 3 | RNVC: 2
1CA16: RNCC: 3 | RNVC: 2
BEB16: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-333-3107
Pipe Flange

143333107
BN320-516TUBE57: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-424-5520
Quick Disconnect Coupling Half

144245520
RCS11-1813: RNCC: 3 | RNVC: 2

27 May 1988

4730-14-562-5614
Tube Elbow

145625614
3129 08 10: RNCC: 3 | RNVC: 2
31290810: RNCC: 5 | RNVC: 2

3 Nov 2009

4730-14-548-7661
Tube Union

145487661
TRI 02 RVP: RNCC: 3 | RNVC: 2

8 Feb 2006

4730-14-327-6197
Bulkhead Hose Connector

143276197
0264751060: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-429-3907
Bulkhead Hose Connector

144293907
95-5944: RNCC: 3 | RNVC: 2

20 Jan 1989

4730-14-325-7400
Lubricant Pressure Relief Fitting

143257400
612-102-611-2: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-374-2957
Self-Sealing Coupling Half

143742957
S075-0-1-2-2137: RNCC: 3 | RNVC: 2
SM07508AU2137: RNCC: 5 | RNVC: 2

8 Dec 1981

4730-14-212-4210
Tube To Boss Straight Adapter

142124210
610-118-005-0: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-399-2893
Spec Mamelon Double

143992893
785-57: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-540-5967
Tube To Boss Straight Adapter

145405967
202208-12-12B: RNCC: 3 | RNVC: 2

7 Apr 2004

4730-14-310-4541
Pipe Flange

143104541
RUAN7518-70: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-241-5966

4730-14-559-8889
Tube To Hose Elbow

145598889
1SF99120: RNCC: 3 | RNVC: 2

2 Mar 2009

4730-14-365-9381

4730-14-269-1829

4730-14-571-4104
Self-Sealing Coupling Half

145714104
2102-01-17.00: RNCC: 3 | RNVC: 2

22 Mar 2012

4730-14-577-9419
Suction Strainer

145779419
02XB0500--1001--S: RNCC: 3 | RNVC: 2
02XB0500--1001--S: RNCC: 5 | RNVC: 2
02XB0500--1001--S: RNCC: 5 | RNVC: 9

21 Oct 2013

4730-14-243-3409
Buse A Collerette

142433409
S2169: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-576-7867
Tube To Boss Straight Adapter

145767867
ABS0920-04: RNCC: 1 | RNVC: 2
RFK9904-13: RNCC: 3 | RNVC: 2
32790LP04T: RNCC: 5 | RNVC: 2
ABS0920-04: RNCC: 5 | RNVC: 2

15 Jul 2013

4730-14-506-1369
Tube Coupling Assembly

145061369
1427: RNCC: 3 | RNVC: 9

8 Apr 1998

4730-14-293-2806
Fluid Pressure Line Multiple Connector

142932806
50644A420: RNCC: 3 | RNVC: 2
32887: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-040-0049
Bulkhead Hose Connector

140400049
0000240530: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-280-6642
Tube To Boss Straight Adapter

142806642
262070: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-513-2223
Fluid Passage Bolt

145132223
T0810001H: RNCC: 3 | RNVC: 2

10 Mar 1999

4730-14-335-1380
Pipeline Flexible Spacer

143351380
I131NTH250PN16: RNCC: 2 | RNVC: 2
DILNTH250PN16: RNCC: 3 | RNVC: 2
DILNTH250PN16: RNCC: 5 | RNVC: 9

3 Jun 1976

4730-14-230-5960
Tube Coupling Assembly

142305960
3601P32A: RNCC: 3 | RNVC: 2
3601P32A: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-207-6744
Tube Coupling

142076744
0000350184: RNCC: 3 | RNVC: 2
0000350184: RNCC: 5 | RNVC: 9
350184: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-447-7807
Tube To Hose Straight Adapter

144477807
160H732501-41: RNCC: 3 | RNVC: 2

6 Jun 1991

4730-14-393-4019
Quick Disconnect Coupling Half

143934019
N006-224-83: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-456-5483
Fluid Passage Bolt

144565483
MAT424-0061F4: RNCC: 3 | RNVC: 2

9 Jul 1992

4730-14-253-6146
Raccord Droit De Bo

142536146
NO PRIMARY REF14-253-6146: RNCC: 3 | RNVC: 2
329977: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-532-8763

4730-14-353-5949

4730-14-297-8958
Bloc De Derivation

142978958
411MA0162FB36: RNCC: 3 | RNVC: 2
411MA162FB36: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-394-1937
Pipe Flange

143941937
98413431: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-263-1985
Raccord Droit

142631985
NO PRIMARY REF14-263-1985: RNCC: 3 | RNVC: 2
418152: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-565-1641
Hose Clamp

145651641
272134-2540: RNCC: 3 | RNVC: 2

20 Jul 2010

4730-14-554-2101
Pipe Flange

145542101
357 029: RNCC: 3 | RNVC: 2
357 029: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-14-430-7142
Tube Coupling

144307142
PM1A723115600: RNCC: 3 | RNVC: 2
PM1A723115600: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-476-6338
Tube To Boss Straight Adapter

144766338
RV3E12 6E20JMA: RNCC: 3 | RNVC: 2

21 Jun 1995

4730-14-362-8275
Tube To Boss Straight Adapter

143628275
217749: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-392-9363
Tube To Boss Straight Adapter

143929363
0024248759: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-506-8637
Pipe Flange

145068637
E29203PB16DN125A: RNCC: 2 | RNVC: 2
H05VK1X1MM20RANGE: RNCC: 3 | RNVC: 2

27 May 1998

4730-14-499-3888
Tube To Boss Straight Adapter

144993888
60280410: RNCC: 3 | RNVC: 2
295202894100: RNCC: 3 | RNVC: 9
F300 0T 021 9348: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-468-7836
Tube-Pipe Fitting Kit

144687836
1009994P02: RNCC: 3 | RNVC: 2

22 Mar 1994

4730-14-333-5285
Tube To Boss Straight Adapter

143335285
340051: RNCC: 3 | RNVC: 2
8473400510: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-530-0759
Pressure Plug Retention Cap

145300759
81520601: RNCC: 3 | RNVC: 2

6 May 2002

4730-14-515-3840
Tube To Boss Straight Adapter

145153840
6200049: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-388-7590
Tube To Boss Straight Adapter

143887590
M4ZS500D5806: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-261-8662
Pipe Flange

142618662
RUHF25G1: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-309-7600
Tube To Boss Straight Adapter

143097600
S3657CD: RNCC: 3 | RNVC: 2
S3657CC: RNCC: 5 | RNVC: 2
S3657X: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-380-5805
Bulkhead Hose Connector

143805805
802-3: RNCC: 3 | RNVC: 2

29 Nov 1982

4730-14-405-8350
Fluid Pressure Line Multiple Connector

144058350
KHB3K10R1-1-1-2: RNCC: 3 | RNVC: 9

4 Dec 1985

4730-14-281-6790
Raccord Y Coude Col

142816790
MX45-2-2: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-577-2838

4730-14-444-5313

4730-14-346-7101
Bride Speciale

143467101
6784-1DT38: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-333-5238
Barillet A 5 Voies

143335238
GSM163-022F9: RNCC: 3 | RNVC: 2
GSM163-22F9: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-566-4972
Tube To Boss Straight Adapter

145664972
GAI08SRCFX: RNCC: 3 | RNVC: 2
A231004000620: RNCC: 5 | RNVC: 2

18 Nov 2010

4730-14-432-3053
Tube Union

144323053
A4H13983: RNCC: 3 | RNVC: 2

2 Jun 1989

4730-14-333-3471
Mal Conique Chapeau

143333471
R23874REP123456ETB0UCH0NMALE: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-431-3915
Anchor And Reinforcement Pipe Clamp

144313915
SPAL5030PPRDPALAS: RNCC: 3 | RNVC: 2
1XSPAL5030PPRDPALAS: RNCC: 5 | RNVC: 2

14 Apr 1989

4730-14-503-2019
Hose Coupling Assembly

145032019
RP1A500052320: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-031-2759
Fluid Pressure Line Multiple Connector

140312759
01180810: RNCC: 3 | RNVC: 2
1180810: RNCC: 5 | RNVC: 2

14 Jun 1980

4730-14-427-9261
Quick Disconnect Coupling Half

144279261
446589: RNCC: 3 | RNVC: 2

23 Nov 1988

4730-14-459-9056
Pipe Flange

144599056
DLT115984: RNCC: 3 | RNVC: 2

22 Dec 1992

4730-14-459-1514
Tube-Pipe Fitting Kit

144591514
45673939: RNCC: 3 | RNVC: 2
45673939: RNCC: 5 | RNVC: 9

19 Nov 1992

4730-14-365-3466

4730-14-341-4087

4730-14-269-0173
Raccord Orientable

142690173
5204-18-15-21: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-314-1762

4730-14-462-0430
Quick Disconnect Coupling Half

144620430
C1802 G17 06: RNCC: 3 | RNVC: 2
C 1802 G17 06: RNCC: 5 | RNVC: 2
91745583: RNCC: 5 | RNVC: 2
5802-G17-6: RNCC: 5 | RNVC: 9

31 Mar 1993

4730-14-333-5277
Diaphragme

143335277
MAT178-0119F4: RNCC: 3 | RNVC: 2
GSM772-001F10: RNCC: 5 | RNVC: 2
GSM772-01F10: RNCC: 5 | RNVC: 2
000MA272F4REP2ETF10REP3-2ET4-2: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-270-0134

4730-14-263-4982
Bulkhead Hose Connector

142634982
R111813: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-257-0956
Raccord De Tuyauter

142570956
330A31-0116-20: RNCC: 3 | RNVC: 2
330A31-0116-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-482-1881
Tube Tee

144821881
4452-1046: RNCC: 3 | RNVC: 2
IF208-046: RNCC: 5 | RNVC: 9

25 Jun 1996

4730-14-484-8382
Pipe Flange

144848382
10-87-062D2: RNCC: 3 | RNVC: 2

10 Dec 1996

4730-14-456-6468
Tube Tee

144566468
LN326064F8REP5: RNCC: 3 | RNVC: 2

16 Jul 1992

4730-14-219-7385
Raccord Vabco

142197385
UA32: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-415-4655
Tube To Boss Straight Adapter

144154655
70391: RNCC: 3 | RNVC: 2

18 May 1987

4730-14-524-8767
Tube To Boss Straight Adapter

145248767
418085: RNCC: 3 | RNVC: 9

25 Apr 2001

4730-14-452-5599
Pipe Flange

144525599
LN320033F27DN40: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-557-2797
Tube Elbow

145572797
0R/C25057160: RNCC: 3 | RNVC: 2

29 May 2008

4730-14-425-0021
Tube To Gas Fitting Straight Adapter

144250021
F63XS12-3-8: RNCC: 3 | RNVC: 2
91614743: RNCC: 5 | RNVC: 2

16 Jun 1988

4730-14-427-4471
Tube Tee

144274471
4730JCEG114,3X8,8: RNCC: 2 | RNVC: 2

20 Oct 1988

4730-14-381-2435
Tube-Hose Fitting Compression Sleeve

143812435
X0026779: RNCC: 3 | RNVC: 2
S4710X0002-6779: RNCC: 5 | RNVC: 2
F0532S4710X0002-6779: RNCC: 5 | RNVC: 2

25 Jan 1983

4730-14-458-0909
Tube Elbow

144580909
W30S: RNCC: 3 | RNVC: 2

7 Oct 1992

4730-14-440-8991
Tube Union

144408991
GE22LREDOMD: RNCC: 3 | RNVC: 2

7 Aug 1990

4730-14-407-5436
Accouplemen Raccord

4730-14-429-5099
Tuyau Collier

4730-14-421-0856
Raccord

144210856
EXPRESS699-13: RNCC: 3 | RNVC: 2

6 Jan 1988

4730-14-314-6241
Tube Coupling

143146241
DL110-6J: RNCC: 3 | RNVC: 2
9560111780: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-553-1163
Tube To Boss Straight Adapter

145531163
GE18ZLR3-4EDA3C: RNCC: 3 | RNVC: 2
437388: RNCC: 5 | RNVC: 2
GE18ZLR3-4EDA3C: RNCC: 5 | RNVC: 9

5 Mar 2007

4730-14-310-4258
Tube Repair Plug

143104258
K1712DREP8TAMC16: RNCC: 3 | RNVC: 2
K79-12REP8TAMP0N: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-393-3093
Tube Tee

143933093
4730GD038: RNCC: 2 | RNVC: 2
BN324-554F4-38: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-414-2796
Tube Coupling

144142796
332A52-1166-20: RNCC: 3 | RNVC: 2

28 Jan 1987

4730-14-460-3803
Fluid Passage Bolt

144603803
050347601: RNCC: 3 | RNVC: 2
85-694-8745: RNCC: 6 | RNVC: 9

21 Jan 1993

4730-14-553-9441
Quick Disconnect Coupling Half

145539441
N 012 360 06: RNCC: 3 | RNVC: 2
HCB28/L N 012 360 06: RNCC: 5 | RNVC: 2

1 Jun 2007

4730-14-337-9577

4730-14-566-6398
Pipeline Flexible Spacer

145666398
A230406000019: RNCC: 3 | RNVC: 2
11161400-00: RNCC: 3 | RNVC: 2

1 Dec 2010

4730-14-209-1246
Raccord Equipe

142091246
NO PRIMARY REF14-209-1246: RNCC: 3 | RNVC: 2
215310: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-520-0781
Tube To Boss Swivel Joint

145200781
C19SF0011-113: RNCC: 3 | RNVC: 2
C19SF0011-113: RNCC: 5 | RNVC: 2
HP1 6TGB 12: RNCC: 5 | RNVC: 2

10 May 2000

4730-14-515-4804
Sous Ens Raccordeme

145154804
MAT171-0561: RNCC: 3 | RNVC: 2

19 Jul 1999

4730-14-252-2608
Tube Coupling

142522608
ESQ1-52-37TF: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-301-3221
Self-Sealing Coupling Assembly

143013221
61-43677-01: RNCC: 3 | RNVC: 2
85-694-2731: RNCC: 6 | RNVC: 9

1 Jan 1973

4730-14-282-0941
Tube To Boss Straight Adapter

142820941
Q1-53-10-16X125: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-527-1492
Swivel Flange To Hose Connector

145271492
SN11-15-12-SAE6000: RNCC: 3 | RNVC: 2
RAQ0568: RNCC: 5 | RNVC: 2

8 Oct 2001

4730-14-520-0789
Straight Tubing Connector

145200789
B14DF2140-033: RNCC: 3 | RNVC: 2
B14DF2140-033: RNCC: 5 | RNVC: 2

10 May 2000

4730-14-299-8564
Tube To Boss Straight Adapter

142998564
4730AJUNI0NMALE0RIRBSM39X200CA36: RNCC: 2 | RNVC: 2
Q1-5204JC36-39X200: RNCC: 3 | RNVC: 2
GSM164-014F59: RNCC: 3 | RNVC: 2
ORK36X39-200N: RNCC: 3 | RNVC: 2
5CA36-39X200RJS: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-310-4534
Tube Tee

143104534
RUAN7523-70: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-403-0383
Quick Disconnect Coupling Half

144030383
RBE11-21030D9: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-499-2047
Tube To Boss Straight Adapter

144992047
999999-058: RNCC: 3 | RNVC: 2
103243005013A: RNCC: 3 | RNVC: 9
F300 0T 019 7693: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-040-4999
Fluid Pressure Line Multiple Connector

140404999
611-14-90EJBR: RNCC: 3 | RNVC: 2
9567141782: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-546-4730
Lubrication Fitting

145464730
5005097016: RNCC: 3 | RNVC: 2

6 Jul 2005

4730-14-471-8564
Etrangleme Pastille

144718564
F00077813: RNCC: 3 | RNVC: 2
5000824642: RNCC: 5 | RNVC: 2
F00077813: RNCC: 5 | RNVC: 9

21 Sep 1994

4730-14-505-1338
Manchon Uni Mamelon

4730-14-572-6609
Hydraulic Manifold Assembly

145726609
332A75-2239-00: RNCC: 3 | RNVC: 2
332A75223900: RNCC: 5 | RNVC: 2

23 Jul 2012

4730-14-508-8083
Return Tube Bend

145088083
3.54091.0: RNCC: 3 | RNVC: 2
3-54091-0: RNCC: 5 | RNVC: 9

30 Sep 1998

4730-14-553-4220
Quick Disconnect Coupling Half

145534220
6-FCB-4-PM-Q3-SS: RNCC: 3 | RNVC: 2

3 Apr 2007

4730-14-426-7942
Tube Tee

144267942
4730HEING139,7X6,3-88,9X5: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-257-0967
Raccord De Tuyauter

142570967
330A31-1188-21: RNCC: 3 | RNVC: 2
330A31-1188-2100: RNCC: 5 | RNVC: 2
330A31-1557-20: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-333-3398

4730-14-321-5844
Pipe Flange

143215844
U1092EB41-5: RNCC: 2 | RNVC: 2
7067E41,5GAMMM12CU-AL9NI3FE2: RNCC: 5 | RNVC: 9
7067E41,5GAMMM11CU-AL9NI3FE2: RNCC: 5 | RNVC: 9
7067E41-5: RNCC: 5 | RNVC: 9
7067E41-5C337CL2: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-041-2380
Sediment Strainer Element

140412380
14215: RNCC: 3 | RNVC: 2
4854-01-20-4: RNCC: 5 | RNVC: 9
4860-99DN20: RNCC: 5 | RNVC: 9
14215: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-573-2589
Hose Elbow

145732589
1SA99340: RNCC: 3 | RNVC: 2

26 Sep 2012

4730-14-365-2998

4730-14-249-2015
Raccord Special

142492015
ST406M53P119: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-385-2035
Tube To Boss Straight Adapter

143852035
UML38M42X100: RNCC: 3 | RNVC: 2
20702100: RNCC: 5 | RNVC: 2
UML38-42X100: RNCC: 5 | RNVC: 2

26 Jul 1983

4730-14-510-6153
Tube To Boss Straight Adapter

145106153
NO PRIMARY REF14-510-6153: RNCC: 3 | RNVC: 2
10811: RNCC: 5 | RNVC: 2

4 Nov 1998

4730-14-247-3268
Raccord Special

142473268
321A75-0868-20: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-387-8460
Pipe Flange

143878460
NO PRIMARY REF14-387-8460: RNCC: 3 | RNVC: 2
0005-701DN10: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-377-9031
Tube Fitting Brazing Ferrule

143779031
GSM164-023F11: RNCC: 3 | RNVC: 2
MAT164-0355F11: RNCC: 3 | RNVC: 2

10 Jun 1982

4730-14-331-8711
Pipe Expansion Joint

143318711
307-231-40-25-60: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-418-6524
Pipe Flange

144186524
E29203-01B-PN16DN32BF42N: RNCC: 2 | RNVC: 2
MEC10338: RNCC: 3 | RNVC: 2
RAR1391: RNCC: 5 | RNVC: 2
4730CJ-DN32: RNCC: 5 | RNVC: 2

9 Sep 1987

4730-14-228-6931
Tube Coupling

142286931
GSM1297FC1TABLEAU1D1-14: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-376-5245
Fluid Pressure Line Multiple Connector

143765245
NO PRIMARY REF14-376-5245: RNCC: 3 | RNVC: 2
404211203: RNCC: 5 | RNVC: 2
404211203: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-463-5340
Tuyau Bouchon

4730-14-480-8162

4730-14-426-7938
Tube Tee

144267938
4730HEING139,7X6,3-60,3X2,9: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-455-5709
Tube To Boss Straight Adapter

144555709
F64XS6-1-8: RNCC: 3 | RNVC: 2
91719252: RNCC: 5 | RNVC: 2

28 May 1992

4730-14-507-5100
Tube Coupling Nut Assembly

145075100
K-N12VT: RNCC: 3 | RNVC: 2
9560137230: RNCC: 5 | RNVC: 2

16 Jul 1998

4730-14-507-5417
Fluid Pressure Line Multiple Connector

145075417
704A34-422-029: RNCC: 1 | RNVC: 2
T16234EK: RNCC: 3 | RNVC: 2

16 Jul 1998

4730-14-442-7689
Quick Disconnect Plug

144427689
K08A50-001: RNCC: 3 | RNVC: 2

31 Oct 1990

4730-14-321-3689
Tube Union

143213689
21-51-01DN10: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-276-2085
Pipe-Tube Escutcheon

142762085
6784-1EB80: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-367-3379

4730-14-419-0218
Tube To Boss Straight Adapter

144190218
F4BRA-B10-3/8: RNCC: 3 | RNVC: 2
F4BRA-B10-3/8: RNCC: 3 | RNVC: 9
F4BRAB10-3/8: RNCC: 5 | RNVC: 9
F4BRAB10-3/8: RNCC: 5 | RNVC: 9

29 Sep 1987

4730-14-398-5889
Tube Tee

143985889
GSM164-055F9: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-504-4542
Quick Disconnect Coupling Assembly Set

145044542
0799-5003: RNCC: 3 | RNVC: 2
NT 3439-2001 STCM 1996: RNCC: 4 | RNVC: 1
SYQ0064: RNCC: 5 | RNVC: 2
SAF0799-5003: RNCC: 5 | RNVC: 9

18 Feb 1998

4730-14-308-0224
Tube To Boss Straight Adapter

143080224
A3-75006: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-387-8569
Tube Coupling

143878569
NO PRIMARY REF14-387-8569: RNCC: 3 | RNVC: 2
0026-145DN15: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-540-2542
Canne D'etancheite

145402542
2000/16 EATSEA/BVM/A: RNCC: 3 | RNVC: 2

18 Mar 2004

4730-14-300-7537
Tube Tee

143007537
GSM523-026F10: RNCC: 3 | RNVC: 2
GSM523-26F10: RNCC: 5 | RNVC: 2
411MA127FB21: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-458-3562
Tube To Boss Straight Adapter

144583562
LN329-017REP82: RNCC: 3 | RNVC: 2
LN329-017F16DE21,3G3/4"EQ: RNCC: 5 | RNVC: 2

20 Oct 1992

4730-14-560-1252
Pipe To Tube Elbow

145601252
EV16SOMDCF: RNCC: 3 | RNVC: 2

26 Mar 2009

4730-14-486-4166
Tube Tee

144864166
702A30-5500-54: RNCC: 3 | RNVC: 2

19 Mar 1997

4730-14-234-9256
Raccord Adaptateur

142349256
G56-5908ADET2: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-275-2451

4730-14-262-7604

4730-14-385-7504
Tube To Boss Straight Adapter

143857504
NO PRIMARY REF 14-385-7504: RNCC: 3 | RNVC: 2
D86-10-428: RNCC: 5 | RNVC: 9

26 Jul 1983

4730-14-221-7255
Raccord Orientable

142217255
P939-30EARS: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-475-0567
Piece Raccordement

144750567
MAT852-0078F3: RNCC: 3 | RNVC: 2

16 Mar 1995

4730-14-362-2828
Fluid Pressure Line Multiple Connector

143622828
330A52-9828-00: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-486-4137
Self-Sealing Coupling Assembly Parts Kit

144864137
AE20074-056: RNCC: 3 | RNVC: 2
RAB9968: RNCC: 5 | RNVC: 2

18 Mar 1997

4730-14-578-5221
Tube Fitting Insert

145785221
166-51007: RNCC: 3 | RNVC: 2
4031026320458: RNCC: 5 | RNVC: 2
CNV-M20-PG9: RNCC: 5 | RNVC: 2

9 Dec 2013

4730-14-262-5770
Bague De Raccord

142625770
01089: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-512-8750
Tube Union

145128750
485396: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-367-6466
Fluid Passage Bolt

143676466
Q17330-87: RNCC: 3 | RNVC: 2
050441: RNCC: 5 | RNVC: 2
Q17330-87: RNCC: 5 | RNVC: 2

19 Jan 1981

4730-14-424-6480
Tube To Boss Straight Adapter

144246480
LW110-NS1214N: RNCC: 3 | RNVC: 2
UMA12X14-150N: RNCC: 5 | RNVC: 2
460-447: RNCC: 5 | RNVC: 2

2 Jun 1988

4730-14-353-0742
Quick Disconnect Coupling Half

143530742
RBE19-2104DKB: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-332-5760
Tube Tee

143325760
319A73-37-090-02: RNCC: 3 | RNVC: 2
85-800-5483: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-288-5303
Pipe To Tube Straight Adapter

142885303
NO PRIMARY REF14-288-5303: RNCC: 3 | RNVC: 2
DH500198: RNCC: 5 | RNVC: 9
500198: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-394-1704
Tube To Boss Straight Adapter

143941704
DIV103-08: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-491-6341
Graisseur

144916341
MT01-03-16: RNCC: 3 | RNVC: 2
F300 0T 003 7208: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-494-7032
Tube Tee

144947032
NO PRIMARY REF14-494-7032: RNCC: 3 | RNVC: 2
017990: RNCC: 5 | RNVC: 9
017-990: RNCC: 5 | RNVC: 9
F300 0T 017 8038: RNCC: 6 | RNVC: 9
F300 0T 022 5428: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-426-2127
Bride Equipee

144262127
X34433-51: RNCC: 3 | RNVC: 2

4 Aug 1988

4730-14-350-2144

4730-14-434-5335
Flange To Tube Straight Adapter

144345335
6717-7: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-321-9637
Pipe Flange

143219637
MAT147-0043F7: RNCC: 3 | RNVC: 2
GSM147-004F11: RNCC: 3 | RNVC: 9
MAT147-0044: RNCC: 4 | RNVC: 1
GSM147-04F11: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-347-6167
Pipe Expansion Joint

143476167
307-225-65-25-74MN7066CC1: RNCC: 3 | RNVC: 2

1 Mar 1978

4730-14-457-8923
Tube Tee

144578923
4730JCEG060,3X05,6: RNCC: 2 | RNVC: 2

26 Sep 1992

4730-14-508-7971
Return Tube Bend

145087971
3.50500.0: RNCC: 3 | RNVC: 2

30 Sep 1998

4730-14-216-2874
Bouchon Special

142162874
A15166-3: RNCC: 3 | RNVC: 2
1-100-464: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-452-7978
Tube To Boss Straight Adapter

144527978
UFLISO6X10-100: RNCC: 3 | RNVC: 9
436865: RNCC: 5 | RNVC: 9

21 Jan 1992

4730-14-305-6257
Tube Tee

143056257
9108131847: RNCC: 3 | RNVC: 2
I14-13-12-17BR: RNCC: 5 | RNVC: 9
I14-13-12X17BRHP: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-350-0420
Fluid Pressure Line Multiple Connector

143500420
6AR810M16KD01: RNCC: 3 | RNVC: 2
613-988-538-0: RNCC: 5 | RNVC: 2

14 Jun 1978

4730-14-271-0947
Raccord Equipe

142710947
AQ8BF16-2A: RNCC: 3 | RNVC: 2
501-716-541-0: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-362-7878
Tube To Boss Straight Adapter

143627878
238600-78: RNCC: 3 | RNVC: 2
TF10A29301: RNCC: 5 | RNVC: 2
85-688-4593: RNCC: 6 | RNVC: 9

19 Mar 1980

4730-14-334-0347
Tube Coupling

143340347
375-087-6198-02: RNCC: 3 | RNVC: 2
DLT036650: RNCC: 3 | RNVC: 2

23 Apr 1976

4730-14-507-6561
Fluid Passage Bolt

145076561
NO PRIMARY REF14-507-6561: RNCC: 3 | RNVC: 2
10X18P100: RNCC: 5 | RNVC: 9

11 Aug 1998

4730-14-218-1140
Raccord Special

142181140
M3C704-93: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-222-6544
Tube Fitting Brazing Ferrule

142226544
GSM1297F1AF1BTABLEAU2D1-20I14: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-386-8485
Fluid Pressure Line Multiple Connector

143868485
0000302200: RNCC: 3 | RNVC: 2
85-692-4323: RNCC: 6 | RNVC: 9

24 Aug 1983

4730-14-043-0917
Tube To Boss Straight Adapter

140430917
702A30-1110-20: RNCC: 3 | RNVC: 2

10 Apr 1984

4730-14-423-4170
Pipe Flange

144234170
UA50088006PN50-11D1DN150: RNCC: 2 | RNVC: 2
4730HCPN50DN15011D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-224-3861
Fluid Passage Bolt

142243861
323006: RNCC: 3 | RNVC: 2
510053: RNCC: 5 | RNVC: 2
36351: RNCC: 5 | RNVC: 2
513032: RNCC: 5 | RNVC: 2
L513032: RNCC: 5 | RNVC: 2
2088-14: RNCC: 5 | RNVC: 2
5411350: RNCC: 5 | RNVC: 2
5411350X: RNCC: 5 | RNVC: 2
30263: RNCC: 5 | RNVC: 9
DBA323006: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-257-2094
Fluid Passage Bolt

142572094
330A75-1322-20: RNCC: 3 | RNVC: 2
330A75-1322-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-321-3688
Tube Tee

143213688
21-20-01DN10: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-448-3970
Tube Coupling

144483970
RBE03-2704-ODICJE: RNCC: 3 | RNVC: 2
RBE03-2704-0DICJE: RNCC: 5 | RNVC: 2

26 Jun 1991

4730-14-423-4333
Pipe Flange

144234333
UA50088006PN150-11D1DN100: RNCC: 2 | RNVC: 2
4730HCPN150DN10011D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-309-4382
Tube To Boss Straight Adapter

143094382
UR19-35: RNCC: 3 | RNVC: 2
UR19-35TARACC0RD: RNCC: 3 | RNVC: 2
UR19-35TARACC0RD: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-268-7385
Tube To Boss Straight Adapter

142687385
262-10-71504-01: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-346-4564
Fluid Pressure Line Multiple Connector

143464564
PZCF248: RNCC: 3 | RNVC: 2
U70555: RNCC: 5 | RNVC: 9
85-693-4268: RNCC: 6 | RNVC: 9

12 Dec 1977

4730-14-259-3848

4730-14-397-9726
Fluid Pressure Line Multiple Connector

143979726
150241: RNCC: 3 | RNVC: 2
150241-3-1: RNCC: 5 | RNVC: 2
74999: RNCC: 5 | RNVC: 2

31 Jan 1985

4730-14-354-9145
Threaded Tube Fitting Plug

143549145
61-2-253: RNCC: 3 | RNVC: 2

20 Feb 1979

4730-14-397-6999
Embout Filete A Sou

143976999
GSM164-023F13: RNCC: 3 | RNVC: 2
MAT164-0355F13: RNCC: 3 | RNVC: 2
4730ACF3PN250DE17,15: RNCC: 3 | RNVC: 9

14 Dec 1984

4730-14-315-1514
Bulkhead Hose Connector

143151514
M10-75-20TUBECUIVRE: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-343-7673
Bulkhead Hose Connector

143437673
F781-44: RNCC: 3 | RNVC: 2

13 Jul 1977

4730-14-276-9913
Tube Tee

142769913
TR2-121210-631X6221: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-300-7523
Tube Tee

143007523
GSM523-026F42: RNCC: 3 | RNVC: 2
411MA127FB6: RNCC: 5 | RNVC: 2
GSM523-26F42: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-372-8059
Bulkhead Hose Connector

143728059
K99-005: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-257-2555
Fluid Pressure Line Multiple Connector

142572555
702A30-0407-20: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-458-5163
Lubrication Fitting

144585163
24303015: RNCC: 3 | RNVC: 2
2411-04: RNCC: 5 | RNVC: 2
89469738: RNCC: 5 | RNVC: 2

23 Oct 1992

4730-14-389-4584
Bulkhead Hose Connector

143894584
365A55-3133-20: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-255-5001
Raccord Droit

142555001
321A75-7167-20: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-283-8102
Bride

142838102
773-425-140REP15: RNCC: 3 | RNVC: 2
773-425-140FF5DET15: RNCC: 5 | RNVC: 9
773-425-140REP15: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-340-0870
Sediment Strainer Element

143400870
E10-0070-6803-98-98: RNCC: 3 | RNVC: 9
E10-70-6803-98-98: RNCC: 5 | RNVC: 9

18 Jan 1977

4730-14-333-3099
Raccord Sur Parcour

143333099
AS34TV135F8AAVECRALL0NGE: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-562-7173
Hose Plug

145627173
A14013-04: RNCC: 3 | RNVC: 2
A14013-04: RNCC: 5 | RNVC: 9

17 Nov 2009

4730-14-545-2792
Pipe Flange

145452792
LN320058-DN250-BRIDE CREUSE-PN16: RNCC: 3 | RNVC: 2
23REDN/LN320/058-DN250-PN16-F19: RNCC: 5 | RNVC: 2
SYQ5526: RNCC: 5 | RNVC: 2

31 Mar 2005

4730-14-372-4374
Cloche Degagement A

143724374
BN324-509DN80: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-470-1801
Quick Disconnect Coupling Half

144701801
RBE08-6806: RNCC: 3 | RNVC: 2
RBE8-6806: RNCC: 5 | RNVC: 2
RAR1636: RNCC: 5 | RNVC: 2

7 Jun 1994

4730-14-231-6261
Tube Tee

142316261
EN10242-B1-1/4-ZN-A: RNCC: 2 | RNVC: 2
770130202: RNCC: 3 | RNVC: 2
9200201: RNCC: 5 | RNVC: 2
130 1-4Z: RNCC: 5 | RNVC: 2
770 130 202: RNCC: 5 | RNVC: 2
E29801B1BZ: RNCC: 5 | RNVC: 9
50 1-4Z: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-274-6597
Tube-Hose Fitting Compression Sleeve

142746597
7062BA1BT2-14UE10R1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-343-7614
Tube Tee

143437614
FA1F781-007: RNCC: 3 | RNVC: 2

13 Jul 1977

4730-14-471-5086
Quick Disconnect Wye

144715086
RBE06-8102: RNCC: 3 | RNVC: 2

31 Aug 1994

4730-14-330-3349
Tube To Boss Straight Adapter

143303349
12-14-15-21CYL: RNCC: 3 | RNVC: 2
UMA14X15-21N: RNCC: 3 | RNVC: 2
4A14-15-21CYL: RNCC: 3 | RNVC: 2
M14-21: RNCC: 3 | RNVC: 2
4A14-15-21CYL: RNCC: 3 | RNVC: 9
91502179: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-368-3119
Tube To Boss Straight Adapter

143683119
C08375-24: RNCC: 3 | RNVC: 2
2232281: RNCC: 5 | RNVC: 2
137465: RNCC: 5 | RNVC: 2
2232281: RNCC: 5 | RNVC: 2

20 Feb 1981

4730-14-041-2507
Bulkhead Hose Connector

140412507
N410-135: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-314-7791
Tube To Boss Straight Adapter

143147791
328008: RNCC: 3 | RNVC: 2
328008-80: RNCC: 5 | RNVC: 2
DBA328008: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-419-8378
Fluid Pressure Line Multiple Connector

144198378
9T6-6SMK: RNCC: 3 | RNVC: 2

5 Nov 1987

4730-14-409-0691
Tube To Hose Straight Adapter

144090691
6A10-15-21: RNCC: 3 | RNVC: 2

16 Apr 1986

4730-14-298-5918
Tube To Boss Straight Adapter

142985918
NO PRIMARY REF14-298-5918: RNCC: 3 | RNVC: 2
9105131330: RNCC: 5 | RNVC: 2
A2-13-8X13GAZHPCD15: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-566-1717
Pipe Reducer

145661717
A019360 02 06: RNCC: 3 | RNVC: 2

25 Oct 2010

4730-14-493-5774
Racc0rd

144935774
101-1B580: RNCC: 3 | RNVC: 2
F300 0T 013 6636: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-284-6752
Fluid Pressure Line Multiple Connector

142846752
501-800-166-0: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-262-1587
Pipe Flange

142621587
7062DJ1F1F30-3-5-14CD2-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-414-2317
Pipe Flange

144142317
U1240-11B2SPN150DN32Z2CND17-12T3: RNCC: 3 | RNVC: 2

27 Jan 1987

4730-14-271-1350
Quick Disconnect Coupling Assembly

142711350
SS0-63BDB: RNCC: 3 | RNVC: 2
SS02-61X63: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-428-9290
Hose To Boss Straight Adapter

144289290
AF152-10: RNCC: 3 | RNVC: 2

28 Dec 1988

4730-14-423-4226
Pipe Flange

144234226
UA50088006PN100-11C1DN200: RNCC: 2 | RNVC: 2
4730HCPN100DN20011C1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-353-8980
Tube Tee

143538980
NO PRIMARY REF14-353-8980: RNCC: 3 | RNVC: 2
130CR20-14-20: RNCC: 5 | RNVC: 9

16 Jan 1979

4730-14-300-0206
Fluid Passage Bolt

143000206
L44312-18ADL: RNCC: 2 | RNVC: 2
353-440-2349: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-257-2112
Fluid Pressure Line Multiple Connector

142572112
330A75-2136-00: RNCC: 3 | RNVC: 2
330A75-2136-0000: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-514-3620
Tube-Hose Fitting Compression Sleeve

145143620
NO PRIMARY REF14-514-3620: RNCC: 3 | RNVC: 2
BAGUE BICONIQUE PR16X20: RNCC: 5 | RNVC: 2
NNP4730860757632: RNCC: 5 | RNVC: 2

12 May 1999

4730-14-222-7321
Tube Tee

142227321
GSM1297FE3-32TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-350-1364
Pipe Flange

143501364
7062TD1F1M121UA9NFEM: RNCC: 2 | RNVC: 2
4730CG-121M: RNCC: 5 | RNVC: 2

14 Jun 1978

4730-14-354-1799
Fluid Passage Bolt

143541799
NO PRIMARY REF14-354-1799: RNCC: 3 | RNVC: 2
5145230400: RNCC: 5 | RNVC: 2
452304: RNCC: 5 | RNVC: 9

30 Jan 1979

4730-14-379-8314
Bulkhead Hose Connector

143798314
2724-17: RNCC: 3 | RNVC: 2

20 Oct 1982

4730-14-545-2579
Pipe Flange

145452579
1129-61-406-200: RNCC: 3 | RNVC: 2

30 Mar 2005

4730-14-362-8250
Tube To Boss Straight Adapter

143628250
Q1-52-12-8-13CYL: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-333-5131
Barillet A 4 Voies

143335131
GSM163-005BF15: RNCC: 3 | RNVC: 2
GSM163-05BF15: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-459-3123
Quick Disconnect Coupling Half

144593123
RBE06-2101/D/KJ: RNCC: 3 | RNVC: 2

24 Nov 1992

4730-14-242-7996
Tube Tee

142427996
NG40901-4APL41N0M1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-518-3752
Quick Disconnect Coupling Half

145183752
RBE06.7103/IC/JV/HP: RNCC: 3 | RNVC: 2

2 Feb 2000

4730-14-480-3250
Self-Sealing Coupling Half

144803250
5400S5-16: RNCC: 3 | RNVC: 2
91719952: RNCC: 5 | RNVC: 2

7 Mar 1996

4730-14-423-4630
Pipe Flange

144234630
UA50088006PN420-11B2SDN100: RNCC: 2 | RNVC: 2
4730HCPN420DN10011B2S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-422-2327
Air Hose Connector

144222327
0436-01-118000: RNCC: 3 | RNVC: 2

24 Feb 1988

4730-14-490-5826
Fluid Flow Restrictor Unit

144905826
384927: RNCC: 3 | RNVC: 2
EPA21410-223: RNCC: 5 | RNVC: 1
384927-001: RNCC: 5 | RNVC: 9

2 Oct 1997

4730-14-396-3922
Fluid Passage Bolt

143963922
IF032-287: RNCC: 3 | RNVC: 9

27 Nov 1984

4730-14-495-1744
Union

144951744
NO PRIMARY REF14-495-1744: RNCC: 3 | RNVC: 2
CH258023: RNCC: 5 | RNVC: 9
F300 0T 018 6124: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-423-4568
Pipe Flange

144234568
UA50088006PN150-11B2SDN80: RNCC: 2 | RNVC: 2
4730HCPN150DN08011B2S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-388-9306
Tube Coupling

143889306
39086041: RNCC: 3 | RNVC: 2
39086041: RNCC: 5 | RNVC: 9
A18AP0050-082: RNCC: 5 | RNVC: 9

29 Nov 1983

4730-14-387-8451
Pipe Flange

143878451
NO PRIMARY REF14-387-8451: RNCC: 3 | RNVC: 2
0005-501DN50: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-374-6749
Fluid Pressure Line Multiple Connector

143746749
D1512-766: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-478-5454
Lubrication Fitting

144785454
EN2646-01: RNCC: 2 | RNVC: 2

8 Nov 1995

4730-14-032-3062
Tube To Boss Straight Adapter

140323062
7062BB1VCT2-14UA9: RNCC: 3 | RNVC: 9

20 Jul 1982

4730-14-328-4475
Fluid Pressure Line Multiple Connector

143284475
Q1-509-32-39X150: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-500-1318
Fluid Passage Bolt

145001318
NON PRIMARY REF14-500-1318: RNCC: 3 | RNVC: 2
H01-4A3CX: RNCC: 5 | RNVC: 9
H0R1-4B2A: RNCC: 5 | RNVC: 9
F300 0T 024 1331: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-367-7042

4730-14-367-7876

4730-14-367-7165

4730-14-563-6005
Tube Nipple

145636005
05C254: RNCC: 3 | RNVC: 2

24 Feb 2010

4730-14-566-1504
Pipe Outlet

145661504
55402701: RNCC: 3 | RNVC: 2

21 Oct 2010

4730-14-508-8056
Return Tube Bend

145088056
3.50517.0: RNCC: 3 | RNVC: 2
3-50517-0: RNCC: 5 | RNVC: 9

30 Sep 1998

4730-14-345-4155
Raccord De Sortie P

4730-14-269-2112

4730-14-434-7129
Adaptateur Bride

144347129
BN329515D2DN150AC: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-558-8649
Hose To Gas Fitting Straight Adapter

145588649
1CA50340: RNCC: 3 | RNVC: 2

18 Nov 2008

4730-14-221-3566
Reducteur Pour Rese

142213566
K3418: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-261-7706
Tube To Boss Straight Adapter

142617706
UFL16 3-4BSPC: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-353-8957

4730-14-367-7769

4730-14-570-2312
Lubrication Fitting

145702312
57301: RNCC: 3 | RNVC: 2

30 Nov 2011

4730-14-367-7069

4730-14-405-5708
Tube To Gas Fitting Straight Adapter

144055708
RI3/4X1/2A3CX: RNCC: 3 | RNVC: 2
RI3/4X1/2A3CX: RNCC: 3 | RNVC: 2
RAR1377: RNCC: 5 | RNVC: 2
RI3/4X1/2: RNCC: 5 | RNVC: 2

4 Dec 1985

4730-14-449-5536
Tube Union

144495536
RACCORD SOUD PAR EM L26,9: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-458-3718
Tube Coupling

144583718
Q9-3G1/2BSPK: RNCC: 3 | RNVC: 2
825550: RNCC: 5 | RNVC: 2

21 Oct 1992

4730-14-419-9824
Porte Injecteur

144199824
66652-0112-005: RNCC: 3 | RNVC: 2

13 Nov 1987

4730-14-563-9688
Pipeline Flexible Spacer

145639688
NO PRIMARY REF 14-563-9688: RNCC: 3 | RNVC: 2
661J-100: RNCC: 5 | RNVC: 2
FIG661J ELAFLEX-100: RNCC: 5 | RNVC: 2
FIG661J-100: RNCC: 5 | RNVC: 2

31 Mar 2010

4730-14-556-4473
Pipe Flange

145564473
2A 2 E EF 558300 001 2/5 DN32: RNCC: 3 | RNVC: 2

10 Mar 2008

4730-14-404-9596
Tube To Gas Fitting Straight Adapter

144049596
F3XS6 1-8: RNCC: 3 | RNVC: 2
F3XS6-1-8: RNCC: 5 | RNVC: 2
824246: RNCC: 5 | RNVC: 9

20 Nov 1985

4730-14-374-6220
Fluid Pressure Line Multiple Connector

143746220
COR8BRAB10M14: RNCC: 3 | RNVC: 2
COR8BRAB10M14: RNCC: 3 | RNVC: 2
C0R8RAB10M14: RNCC: 5 | RNVC: 2
C0R8RAB10M14X1-5: RNCC: 5 | RNVC: 2

30 Jan 1982

4730-14-462-4018
Fluid Passage Bolt

144624018
800057: RNCC: 3 | RNVC: 2

15 Apr 1993

4730-14-403-0343
Tube Tee

144030343
JBTXS10: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-485-4247
Bulkhead Hose Connector

144854247
518 001-NIB-S: RNCC: 3 | RNVC: 2
1124067L00: RNCC: 5 | RNVC: 2

23 Jan 1997

4730-14-486-5006
Tube Vers Bos Coude

4730-14-506-3050
Tube Union

145063050
M3/4BW-F3/4NPT: RNCC: 3 | RNVC: 2
91712946: RNCC: 5 | RNVC: 2
77091078: RNCC: 5 | RNVC: 2

22 Apr 1998

4730-14-326-2379
Tube Fitting Flared Sleeve

143262379
502-706-111-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-480-1941
Lubrication Fitting

144801941
5002214-M10X150: RNCC: 3 | RNVC: 2
EA2-0318: RNCC: 5 | RNVC: 2
ALG5002214-M10X150: RNCC: 5 | RNVC: 9

27 Feb 1996

4730-14-498-7312
Tube To Boss Straight Adapter

144987312
NO PRIMARY REF14-498-7312: RNCC: 3 | RNVC: 2
12-10-05-151: RNCC: 5 | RNVC: 9
121005151: RNCC: 5 | RNVC: 9
F300 0T 008 2260: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-437-1595
Air Hose Connector

144371595
27377889-6: RNCC: 3 | RNVC: 2
SG-AX132: RNCC: 5 | RNVC: 2

17 Jan 1990

4730-14-459-3124
Quick Disconnect Coupling Half

144593124
RBE06-2101/D/KV: RNCC: 3 | RNVC: 2

24 Nov 1992

4730-14-356-2906
Quick Disconnect Coupling Half

143562906
3919400: RNCC: 3 | RNVC: 2
3919-400: RNCC: 5 | RNVC: 2

25 Apr 1979

4730-14-010-0916
Fluid Pressure Line Multiple Connector

140100916
3130S69-01-902: RNCC: 3 | RNVC: 2

1 Jan 1961

4730-14-537-7534
Tube To Gas Fitting Straight Adapter

145377534
UMX30G1.1/4B-Y-IB: RNCC: 3 | RNVC: 2
UMX30G1.1/4B-Y-IB: RNCC: 5 | RNVC: 9

19 Nov 2003

4730-14-347-8065
Equipe Embout Lisse

143478065
1LE14FF: RNCC: 3 | RNVC: 2

1 Mar 1978

4730-14-403-5234
Fluid Pressure Line Multiple Connector

144035234
5171702100: RNCC: 3 | RNVC: 2
717021: RNCC: 5 | RNVC: 2

21 Aug 1985

4730-14-306-8978
Bulkhead Hose Connector

143068978
0210140120: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-430-6252
Bulkhead Hose Connector

144306252
PM1A524149001: RNCC: 3 | RNVC: 2
PM1A524149001: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-519-0689
Quick Disconnect Coupling Assembly

145190689
SJS80DB: RNCC: 3 | RNVC: 2

6 Mar 2000

4730-14-540-6819
Fuel Feeder Manifold

145406819
76448810400: RNCC: 3 | RNVC: 2

17 Apr 2004

4730-14-523-2393
Bulkhead Hose Connector

145232393
RA1M523304110: RNCC: 3 | RNVC: 2

10 Jan 2001

4730-14-538-9672
Return Tube Bend

145389672
NGM0053236705832: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-041-9541
Bulkhead Hose Connector

140419541
0264208140: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-552-8977
Tube Union

145528977
5000789279: RNCC: 3 | RNVC: 2

12 Feb 2007

4730-14-322-9656
Sediment Strainer Element

143229656
121E93-145-46-1: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-558-5007
Pressure Plug Retention Cap

145585007
14100022956: RNCC: 3 | RNVC: 2

8 Oct 2008

4730-14-498-0486
Graisseur

144980486
M10135000: RNCC: 3 | RNVC: 2
MI0135000: RNCC: 3 | RNVC: 2
F300 0T 001 8481: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-235-3488

4730-14-378-3242
Coude A Souder

143783242
C0UDEL0NG90EF18P0UCES-ASTMA234G-: RNCC: 3 | RNVC: 1

20 Jul 1982

4730-14-286-4507
Raccord Tournant

142864507
A24931-10: RNCC: 3 | RNVC: 2
A24931-10: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-245-3487
Raccord Special Pou

142453487
NO PRIMARY REF14-245-3487: RNCC: 3 | RNVC: 2
72803A: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-328-1654
Sediment Strainer Element

143281654
1799-11-01-201: RNCC: 3 | RNVC: 2
000012: RNCC: 5 | RNVC: 2
12: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-389-2779
Quick Disconnect Coupling Half

143892779
213-10: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-389-4541
Pipe Flange

143894541
365A54-1041-20: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-262-1695
Pipe Flange

142621695
7062DL1F1M66-5XC18: RNCC: 2 | RNVC: 2
MEC10313: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-451-9867
Self-Sealing Coupling Assembly

144519867
SM03612AU1232: RNCC: 3 | RNVC: 2
SOM36-12U27-12-32: RNCC: 5 | RNVC: 2

18 Dec 1991

4730-14-371-9134
Pipe Expansion Joint

143719134
307-225-50-25-74: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-330-3805
Quick Disconnect Coupling Half

143303805
73-043-178: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-301-1050
Tube To Boss Straight Adapter

143011050
330A75-3143-20: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-551-1229
Sediment Strainer Body

145511229
H00719-003: RNCC: 3 | RNVC: 2
H00719-003: RNCC: 5 | RNVC: 9

28 Aug 2006

4730-14-268-1207
Pipe Flange

142681207
6784-1DG38-20: RNCC: 2 | RNVC: 2
MEC11205: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-333-5126
Barillet A 4 Voies

143335126
GSM163-005BF10: RNCC: 3 | RNVC: 2
GSM163-05BF10: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-376-3002
Tube Tee

143763002
G17-33TF: RNCC: 3 | RNVC: 2
99-620-3-028-1-8: RNCC: 5 | RNVC: 2
99620302818: RNCC: 5 | RNVC: 2

30 Mar 1982

4730-14-407-6961
Pipeline Flexible Spacer

144076961
NO PRIMARY REF14-407-6961: RNCC: 3 | RNVC: 2
0329-1302-340-4: RNCC: 5 | RNVC: 9

27 Feb 1986

4730-14-402-5006
Tube To Hose Straight Adapter

144025006
NO PRIMARY REF14-402-5006: RNCC: 3 | RNVC: 2
RCM5-2-7-10: RNCC: 5 | RNVC: 9

3 Jul 1985

4730-14-458-7865
Tube To Boss Straight Adapter

144587865
MAT164-0127F4: RNCC: 3 | RNVC: 2

4 Nov 1992

4730-14-219-0863
Demi Rampe Helicoid

142190863
GSM543-002F9REP3: RNCC: 3 | RNVC: 2
GSM543-002F9: RNCC: 5 | RNVC: 2
GSM543-02FF9: RNCC: 5 | RNVC: 2
GSM543-02DET3: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-370-2607
Tube-Hose Fitting Compression Sleeve

143702607
S262-03DG: RNCC: 3 | RNVC: 2
S2828DG: RNCC: 5 | RNVC: 2

18 May 1981

4730-14-365-7112
Fluid Passage Bolt

143657112
043-04-01-002: RNCC: 3 | RNVC: 2
R300502-07: RNCC: 5 | RNVC: 2

8 Oct 1980

4730-14-310-3225
Tube To Boss Straight Adapter

143103225
GSM772-003F7: RNCC: 3 | RNVC: 2
000MA272F13REPA2: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-382-2857
Quick Disconnect Coupling Assembly

143822857
NO PRIMARY REF14-382-2857: RNCC: 3 | RNVC: 2
4090DN20: RNCC: 5 | RNVC: 9

17 Feb 1983

4730-14-576-2949
Pipe Fitting Assortment

145762949
0964 198 7: RNCC: 3 | RNVC: 2

11 Jun 2013

4730-14-352-1308
Tube Tee

143521308
15037-1: RNCC: 3 | RNVC: 2

16 Oct 1978

4730-14-309-5552
Racc Toriq Dobturat

143095552
0000100300: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-434-7101
Adaptateur Bride

144347101
BN329515C2DN100AC: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-423-4498
Pipe Flange

144234498
UA50088006PN50-11B2SDN300: RNCC: 2 | RNVC: 2
4730HCPN50DN30011B2S: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-506-7791
Raccord Support Cap

145067791
MAT320-0013F2: RNCC: 3 | RNVC: 2

15 May 1998

4730-14-494-5486
Raccord

4730-14-215-1435
Plaquette Obturatri

142151435
3130S62-21-001: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-560-8903
Tube To Boss Straight Adapter

145608903
AR 004-101.00074: RNCC: 3 | RNVC: 2

28 May 2009

4730-14-386-6220
Tube To Boss Straight Adapter

143866220
9970-145-350: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-260-0850
Tube Coupling

142600850
321A75-0873-20: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-501-2160
Tube To Boss Straight Adapter

145012160
420-003: RNCC: 3 | RNVC: 2
420.003: RNCC: 3 | RNVC: 2
F300 0T 025 2565: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-287-7946
Diaphragme

142877946
6784-2CI14: RNCC: 2 | RNVC: 2

1 Jan 1972

4730-14-431-2210
Pipe Elbow Assembly

144312210
43-10-12X17: RNCC: 3 | RNVC: 2

12 Apr 1989

4730-14-449-5495
Tube Union

144495495
RACCORD IMP G1A BB L33,7: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-228-6803
Tube Tee

142286803
GSM1297FD3-1TABLEAU1D1-36: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-541-1554
Special-Shaped Hose Clamp

145411554
C35DH3000-045: RNCC: 3 | RNVC: 2

14 May 2004

4730-14-393-6185
Lubrication Fitting

143936185
95-671001REP9: RNCC: 3 | RNVC: 2

7 Jun 1984

4730-14-250-2067

4730-14-262-9982
Bride De Support De

142629982
DLT007671: RNCC: 3 | RNVC: 2
DLT007671: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-367-5066

4730-14-329-2211

4730-14-043-0259

4730-14-549-7675
Fluid Pressure Line Multiple Connector

145497675
33100817: RNCC: 3 | RNVC: 2
5010631677: RNCC: 5 | RNVC: 2
3310 08 17: RNCC: 5 | RNVC: 2

10 May 2006

4730-14-479-2431
Pipe Flange

144792431
LN320-039DN50: RNCC: 2 | RNVC: 2
RAB9338: RNCC: 5 | RNVC: 2

20 Dec 1995

4730-14-322-7386
Tube To Boss Straight Adapter

143227386
833040-000: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-262-1559
Pipe Flange

142621559
7062DJ1F1F30-3-5XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-569-8315
Pipe Reducer

145698315
245.1"1/2 -1"1/4: RNCC: 3 | RNVC: 2

24 Oct 2011

4730-14-206-1042
Tube To Hose Straight Adapter

142061042
NO PRIMARY REF14-206-1042: RNCC: 3 | RNVC: 2
23772: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-483-3170
Lubrication Fitting

144833170
332A07-43-046: RNCC: 3 | RNVC: 2

4 Sep 1996

4730-14-479-2778
Tube Coupling

144792778
702A30-0627-20: RNCC: 3 | RNVC: 2

3 Jan 1996

4730-14-324-2231
Pipe Flange

143242231
RUAN7518-108: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-221-7251
Mamelon Special

142217251
JET27-27E: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-286-2374
Cuve Filtre Eau-Mer

142862374
GEMB56-06AREP9: RNCC: 3 | RNVC: 2
GEMB56-13REP8: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-562-4637
Pressure Plug Retention Cap

145624637
ME5528-1: RNCC: 3 | RNVC: 2

28 Oct 2009

4730-14-569-0004
Tube Nipple

145690004
5000496477: RNCC: 3 | RNVC: 2

27 Jul 2011

4730-14-560-1049
Anchor And Reinforcement Pipe Clamp

145601049
332A84-1365-11: RNCC: 3 | RNVC: 2
332A84136511: RNCC: 5 | RNVC: 2

24 Mar 2009

4730-14-378-3243
Coude A Souder

143783243
C0UDEC0URT90EF8P0UCES-ASTMA234G-: RNCC: 3 | RNVC: 1

20 Jul 1982

4730-14-450-7453
Tube Tee

144507453
4730HEINGCH026,9X3,6-17,2X2,3: RNCC: 2 | RNVC: 2

21 Oct 1991

4730-14-461-7129
Pipe Flange

144617129
J22-215DN200E24-2: RNCC: 2 | RNVC: 2

24 Mar 1993

4730-14-463-3398
Fluid Flow Restrictor

144633398
A81704-1: RNCC: 3 | RNVC: 2
85-695-1052: RNCC: 6 | RNVC: 9

9 Jun 1993

4730-14-406-9805
Te Pour Tub Ebauche

144069805
MAT164-0004F2: RNCC: 3 | RNVC: 2

22 Jan 1986

4730-14-031-6156
Tube Union

140316156
MAT164-0355F30: RNCC: 3 | RNVC: 2
GSM164-023F30: RNCC: 5 | RNVC: 2

14 Jun 1980

4730-14-359-6103
Tube Tee

143596103
121051NU: RNCC: 3 | RNVC: 2
105A8-12X100NU: RNCC: 3 | RNVC: 2
T0RSA8X12-100NNU: RNCC: 3 | RNVC: 2
1809-8-12X100NU: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-578-1264
Pipeline Flexible Spacer Fire Protective Cover

145781264
99/339/001/REVB/DN100/LG380: RNCC: 3 | RNVC: 2

4 Nov 2013

4730-14-238-9858
Fluid Passage Bolt

142389858
NO PRIMARY REF14-238-9858: RNCC: 3 | RNVC: 2
SD5016-9: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-407-4299
Tube Tee

144074299
TMCA8-13X6N: RNCC: 3 | RNVC: 2
19-6-8-13CO: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-460-2411
Tube Union

144602411
13GU13G NU: RNCC: 3 | RNVC: 2
870581: RNCC: 5 | RNVC: 2

19 Jan 1993

4730-14-558-6189
Tube Elbow

145586189
WAL024146: RNCC: 3 | RNVC: 2

17 Oct 2008

4730-14-328-7015

4730-14-486-0412
Tuyere Ejecteur Air

144860412
HPANW1611AAREP3-7-8-9-18-20: RNCC: 3 | RNVC: 2
V0698-48PDREP3-7-8-9-18-20: RNCC: 3 | RNVC: 2

26 Feb 1997

4730-14-309-3955
Tube Tee

143093955
773-410-883DET1: RNCC: 3 | RNVC: 2
773-410-883DET1: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-418-1539
Tuyauterie Raccord

144181539
42001-1010S45: RNCC: 3 | RNVC: 2
33901-10-10S: RNCC: 5 | RNVC: 9

6 Aug 1987

4730-14-501-2352
Tube To Boss Straight Adapter

145012352
471-032: RNCC: 3 | RNVC: 2
471.032: RNCC: 3 | RNVC: 2
F300 0T 025 2757: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-521-0996
Fluid Flow Restrictor

145210996
23REDN-LN320038B-DN25: RNCC: 3 | RNVC: 2
REDN-LN320038B-DN25: RNCC: 5 | RNVC: 2

7 Jul 2000

4730-14-320-8700
Racco Traver Embout

143208700
A70-72219: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-420-6224
Tube To Hose Straight Adapter

144206224
F3BMB6-1/8: RNCC: 3 | RNVC: 2
F3MB6-1-8IN: RNCC: 5 | RNVC: 2
J17302: RNCC: 5 | RNVC: 2

16 Dec 1987

4730-14-543-5519
Pipeline Flexible Spacer

145435519
AR1/040/B03/EPDM: RNCC: 3 | RNVC: 2
00015363-00: RNCC: 3 | RNVC: 2
AR1-DN40-EPDM: RNCC: 5 | RNVC: 2
AR1/DN40/B03/EPDM: RNCC: 5 | RNVC: 2

20 Nov 2004

4730-14-410-9860
Tube Fitting Brazing Ferrule

144109860
BN324-551F4-508: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-223-2890
Raccord Special

142232890
A10-77-062-00-0: RNCC: 3 | RNVC: 2
A10-77-062-00-0: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-499-1121
Fuel Feeder Manifold

144991121
128-66-010: RNCC: 3 | RNVC: 2
128-66-010-01: RNCC: 5 | RNVC: 2
F300 0T 018 3065: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-323-9030
Tube To Boss Straight Adapter

143239030
UMB30-1BSPC: RNCC: 3 | RNVC: 2
UMB30-1C0: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-549-4540
Bulkhead Hose Connector

145494540
8062-10-10: RNCC: 3 | RNVC: 2

5 Apr 2006

4730-14-323-4982
Tube To Boss Straight Adapter

143234982
NO PRIMARY REF14-323-4982: RNCC: 3 | RNVC: 2
A2-12-15X21BRIGGSHP: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-482-7991
Tube To Boss Straight Adapter

144827991
01-28-00011: RNCC: 3 | RNVC: 2
EM-MLE12TP: RNCC: 5 | RNVC: 2

25 Jul 1996

4730-14-540-5651
Self-Sealing Coupling Half

145405651
BT03/01 20 600: RNCC: 3 | RNVC: 2
BT03-01 20600: RNCC: 5 | RNVC: 2

6 Apr 2004

4730-14-269-0979
Tube Tee

142690979
5TR20-14-14NN: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-263-1366
Pipe Flange

142631366
2-06845: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-403-5245
Raccord Hydrau Bloc

144035245
5171714800: RNCC: 3 | RNVC: 2
717148: RNCC: 5 | RNVC: 2

21 Aug 1985

4730-14-262-9565
Support Inferieur T

142629565
DLT005281: RNCC: 3 | RNVC: 2
DLT005281: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-262-1712
Pipe Flange

142621712
7062DL1F1M30-3-5-14CD2-5: RNCC: 2 | RNVC: 2
MEC10304: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-436-8902
Quick Disconnect Coupling Half

144368902
RBE03-1150/OD/IC/3: RNCC: 3 | RNVC: 2

8 Jan 1990

4730-14-542-7307

4730-14-391-8715
Moletee Bague

143918715
502029-00: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-435-0554
Pipe Flange

144350554
MAT162-0060F8: RNCC: 3 | RNVC: 2

17 Oct 1989

4730-14-273-5122
Tube To Boss Straight Adapter

142735122
7062BB1RCET2-30UA9: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-317-9367
Fluid Pressure Line Multiple Connector

143179367
341A75-2008-01: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-501-2392
Tube To Boss Straight Adapter

145012392
471.402: RNCC: 3 | RNVC: 2
471-402: RNCC: 3 | RNVC: 2
F300 0T 025 2797: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-553-5953
Hydraulic Manifold Assembly

145535953
3730B85-04: RNCC: 3 | RNVC: 2

20 Apr 2007

Load More Results