What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 52 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 52 of 185

4730-14-286-0401

4730-14-252-2595

4730-14-433-3695
Tube To Boss Straight Adapter

144333695
DLT602446: RNCC: 3 | RNVC: 2
DLT565225GREP8FOLIO18-1/3: RNCC: 5 | RNVC: 2

24 Jul 1989

4730-14-429-8215

4730-14-365-9221

4730-14-255-1575
Graisseur

142551575
ST3143: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-392-5158
Te Raccord

143925158
107024003001: RNCC: 3 | RNVC: 2
107024003001: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-555-9603
Tube To Boss Straight Adapter

145559603
F4PB4-1/4: RNCC: 3 | RNVC: 2
F4PB4-1/4: RNCC: 5 | RNVC: 2

15 Jan 2008

4730-14-421-7609
Quick Disconnect Coupling Half

144217609
96162498: RNCC: 3 | RNVC: 2
RBE061806IA4-5: RNCC: 5 | RNVC: 1
96162498: RNCC: 5 | RNVC: 9

27 Jan 1988

4730-14-395-3549
Sediment Strainer Element

143953549
0100081: RNCC: 3 | RNVC: 2
10-125-81: RNCC: 3 | RNVC: 9

2 Oct 1984

4730-14-454-2017
Module Pour Collier

144542017
8133PP: RNCC: 3 | RNVC: 2

26 Mar 1992

4730-14-303-3385
Fluid Pressure Line Multiple Connector

143033385
158472: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-230-7153
Pipe Flange

142307153
GSM1487DET6: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-557-4562
Hose Bushing

145574562
REDUC00047: RNCC: 3 | RNVC: 2

11 Jun 2008

4730-14-287-3243

4730-14-233-9802

4730-14-346-5447

4730-14-486-3393
Tube To Boss Straight Adapter

144863393
014375-64U: RNCC: 3 | RNVC: 2

12 Mar 1997

4730-14-509-6763
Bulkhead Hose Connector

145096763
RA1M592005151: RNCC: 3 | RNVC: 2

28 Oct 1998

4730-14-530-9387
Tube Coupling

145309387
TOURJIC: RNCC: 3 | RNVC: 2
070428: RNCC: 5 | RNVC: 2

17 Jul 2002

4730-14-292-4973
Sediment Strainer Body

142924973
0236997290: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-455-4353
Fluid Pressure Line Multiple Connector

144554353
WA.1168: RNCC: 3 | RNVC: 2
3148510798400: RNCC: 5 | RNVC: 2
91729346: RNCC: 5 | RNVC: 2
0079840: RNCC: 5 | RNVC: 9

21 May 1992

4730-14-211-1134
Fluid Passage Bolt

142111134
21707: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-449-9982
Fluid Passage Bolt

144499982
5000540035: RNCC: 3 | RNVC: 2
5000540035: RNCC: 5 | RNVC: 9

18 Sep 1991

4730-14-451-3806
Tube Coupling

144513806
333607: RNCC: 3 | RNVC: 2
ESA16S: RNCC: 5 | RNVC: 2

15 Nov 1991

4730-14-533-4750
Tube To Boss Straight Adapter

145334750
05D066: RNCC: 3 | RNVC: 2

5 Feb 2003

4730-14-310-7637
Pipe Flange

143107637
100214: RNCC: 3 | RNVC: 2
8098188: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-418-4573
Tube To Boss Straight Adapter

144184573
3-457728: RNCC: 3 | RNVC: 9
3-457728: RNCC: 5 | RNVC: 2
2198080: RNCC: 5 | RNVC: 2
3-457728: RNCC: 5 | RNVC: 9

26 Aug 1987

4730-14-359-6254
Quick Disconnect Coupling Half

143596254
00995919300: RNCC: 3 | RNVC: 2
9959193: RNCC: 5 | RNVC: 2
VDP7579: RNCC: 5 | RNVC: 2

15 Oct 1979

4730-14-293-9763
Diffuseur Dair

142939763
411MA0596REP19: RNCC: 3 | RNVC: 2
411MA596REP19: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-254-4798
Bulkhead Hose Connector

142544798
1DDR8CLN6: RNCC: 3 | RNVC: 2
B289103: RNCC: 3 | RNVC: 2
501008: RNCC: 5 | RNVC: 2
289103: RNCC: 5 | RNVC: 9
DBAB289103: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-435-9768
Fluid Pressure Line Multiple Connector

144359768
1514788: RNCC: 3 | RNVC: 2
14788: RNCC: 5 | RNVC: 2

29 Nov 1989

4730-14-381-2963
Fluid Passage Bolt

143812963
601428: RNCC: 3 | RNVC: 2
00601428: RNCC: 5 | RNVC: 2

25 Jan 1983

4730-14-341-6831
Tube Tee

143416831
1TR8X6X8: RNCC: 3 | RNVC: 2
TRA8X6X8N: RNCC: 3 | RNVC: 2
10RA8X6X8: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-554-5936
Flange To Tube Elbow

145545936
0000371800: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-450-0024
Tube Tee

144500024
L353153: RNCC: 3 | RNVC: 2
5516013001: RNCC: 5 | RNVC: 2
5516013001: RNCC: 5 | RNVC: 9
DBAL353153: RNCC: 5 | RNVC: 9

18 Sep 1991

4730-14-486-3429
Tube To Boss Straight Adapter

144863429
100375-66X: RNCC: 3 | RNVC: 2

12 Mar 1997

4730-14-459-8344
Grooved Clamp Connecting Coupling Half

144598344
9522000380: RNCC: 3 | RNVC: 2
89299641: RNCC: 5 | RNVC: 2
91720900: RNCC: 5 | RNVC: 2
A05040316: RNCC: 5 | RNVC: 2
A05040316: RNCC: 5 | RNVC: 9

17 Dec 1992

4730-14-265-9517
Tube To Boss Straight Adapter

142659517
MF113: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-509-1489
Tube To Boss Straight Adapter

145091489
ED15: RNCC: 3 | RNVC: 2

21 Oct 1998

4730-14-509-2702
Fluid Passage Bolt

145092702
0235220710: RNCC: 3 | RNVC: 2

21 Oct 1998

4730-14-405-5696
Tube To Boss Straight Adapter

144055696
GE15PLRED: RNCC: 3 | RNVC: 2

4 Dec 1985

4730-14-488-8799
Tube To Boss Straight Adapter

144888799
5005130023: RNCC: 3 | RNVC: 2
5000567150: RNCC: 5 | RNVC: 2

11 Jun 1997

4730-14-336-7683
Tube To Boss Straight Adapter

143367683
340: RNCC: 3 | RNVC: 2

7 Oct 1976

4730-14-282-8583
Tube Tee

142828583
R8X8LX8L: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-365-4705
Tube To Boss Straight Adapter

143654705
F3BRAB14-1/2: RNCC: 3 | RNVC: 2
F3BRAB14-1/2: RNCC: 3 | RNVC: 2

19 Sep 1980

4730-14-415-2447
Tube Tee

144152447
U1238F26DE114,3X5,6ETDE76,1X2,9: RNCC: 2 | RNVC: 2

21 Apr 1987

4730-14-464-3641
Tube Coupling Assembly

144643641
0-3601PS25A: RNCC: 3 | RNVC: 2
0-3601PS25A: RNCC: 5 | RNVC: 9

28 Jul 1993

4730-14-286-5393
Fluid Pressure Line Multiple Connector

142865393
A24972-2: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-325-3833
Embase Pour Tube

143253833
H43792-1: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-203-6464
Raccord Vabco

142036464
UA25: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-577-1243
Tube Union

145771243
ASNA3758-4: RNCC: 1 | RNVC: 2
ASNA3758-4: RNCC: 3 | RNVC: 2
ASNA3758-4: RNCC: 5 | RNVC: 2

12 Aug 2013

4730-14-345-0570

4730-14-237-2122

4730-14-505-0341
Return Tube Bend

145050341
108105128: RNCC: 3 | RNVC: 2
5000029734: RNCC: 5 | RNVC: 2

11 Mar 1998

4730-14-368-0614
Pipe Flange

143680614
I131E850BRIDE: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-392-5359
Tube To Boss Straight Adapter

143925359
313588: RNCC: 3 | RNVC: 2
313588: RNCC: 5 | RNVC: 9

21 Mar 1984

4730-14-536-0461
Tube To Hose Straight Adapter

145360461
PE65401DD18: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-505-1548
Bulkhead Hose Connector

145051548
RA1M527304110: RNCC: 3 | RNVC: 2

11 Mar 1998

4730-14-431-9625
Tube To Boss Straight Adapter

144319625
1121629900: RNCC: 3 | RNVC: 2
91675433: RNCC: 5 | RNVC: 2
DAH1121629900: RNCC: 5 | RNVC: 9

18 May 1989

4730-14-390-5421
Hose To Boss Straight Adapter

143905421
DLT084131: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-364-7184
Tube Tee

143647184
R4X12LX12: RNCC: 3 | RNVC: 2

2 Sep 1980

4730-14-504-2057
Tube-Pipe Fitting Kit

145042057
25391M93: RNCC: 3 | RNVC: 2

11 Feb 1998

4730-14-402-4487
Self-Sealing Coupling Assembly

144024487
96083411: RNCC: 3 | RNVC: 2
96083411: RNCC: 5 | RNVC: 2

3 Jul 1985

4730-14-552-6858
Tube-Pipe Fitting Kit

145526858
6100043000: RNCC: 3 | RNVC: 2

24 Jan 2007

4730-14-506-0362
Bulkhead Hose Connector

145060362
RA1M521709191N1: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-526-5299
Tube To Boss Straight Adapter

145265299
310136A: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-323-9205
Pipe Flange

143239205
7062TC1F1M76UE12: RNCC: 2 | RNVC: 2

1 Jan 1975

4730-14-522-6218
Flange To Hose Elbow

145226218
071092: RNCC: 3 | RNVC: 2

8 Nov 2000

4730-14-433-3718
Hose To Gas Fitting Straight Adapter

144333718
DLT024617: RNCC: 3 | RNVC: 2
DLT565179EREP20AFOLIO2-1/3: RNCC: 5 | RNVC: 2

24 Jul 1989

4730-14-312-9020
Sediment Strainer Element

143129020
0262167060: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-463-2027
Tube To Boss Straight Adapter

144632027
F4BXS38-1,1/4: RNCC: 3 | RNVC: 2
91741684: RNCC: 5 | RNVC: 9

26 May 1993

4730-14-227-2983
Bouchon

142272983
2-00030: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-479-1798
Hose Fitting Swaging Socket

144791798
FI 2.83.07.02: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-297-8977
Bloc De Derivation

142978977
411MA0162FB5: RNCC: 3 | RNVC: 2
411MA162FB5: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-461-2066
Buse

144612066
000-001-411: RNCC: 3 | RNVC: 2

2 Mar 1993

4730-14-040-7542
Raccord Torique

140407542
216629S609: RNCC: 3 | RNVC: 2
216629: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-482-4167
Tube To Boss Straight Adapter

144824167
717.T.08.12X1,00: RNCC: 3 | RNVC: 2
P156T08: RNCC: 3 | RNVC: 2
74717T08: RNCC: 5 | RNVC: 2
717 T 08 12X1,00: RNCC: 5 | RNVC: 2
717T08: RNCC: 5 | RNVC: 2

11 Jul 1996

4730-14-256-1783
Fluid Passage Bolt

142561783
99631102064: RNCC: 3 | RNVC: 2
24048002500: RNCC: 5 | RNVC: 2
25J66: RNCC: 5 | RNVC: 9
48J25: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-505-0100
Return Tube Bend

145050100
5010116071: RNCC: 3 | RNVC: 2

11 Mar 1998

4730-14-464-0395
Quick Disconnect Plug

144640395
TC0500/1: RNCC: 3 | RNVC: 9
995021: RNCC: 5 | RNVC: 2

12 Jul 1993

4730-14-546-5092
Self-Sealing Coupling Assembly

145465092
N002 604 04: RNCC: 3 | RNVC: 2
5010631011: RNCC: 5 | RNVC: 2

12 Jul 2005

4730-14-426-7870
Tube Tee

144267870
4730HEING114,3X12,5-48,3X5: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-444-0886
Tube Coupling

144440886
A81435-6: RNCC: 3 | RNVC: 2
A81435-6: RNCC: 5 | RNVC: 2

18 Dec 1990

4730-14-405-0708
Tube Coupling

144050708
340GCU3/8 14: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-452-5046
Fluid Passage Bolt

144525046
9501M2TMA12437: RNCC: 3 | RNVC: 2

8 Jan 1992

4730-14-264-6580
Tube To Boss Straight Adapter

142646580
217550: RNCC: 3 | RNVC: 2
217550: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-505-6413
Tube Tee

145056413
T2JBFR12: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-514-9924
Tube To Boss Swivel Joint

145149924
6 AGE 12 KD: RNCC: 3 | RNVC: 2
6AGE12KD: RNCC: 5 | RNVC: 2

25 Jun 1999

4730-14-481-0904
Tube To Boss Straight Adapter

144810904
P156T32: RNCC: 3 | RNVC: 2
717.T.32.39X1,50: RNCC: 3 | RNVC: 2
74717T32: RNCC: 5 | RNVC: 2
717T32: RNCC: 5 | RNVC: 2
717 T 32 39X1,50: RNCC: 5 | RNVC: 2
74717T32: RNCC: 5 | RNVC: 2

18 Apr 1996

4730-14-450-5459
Tube To Boss Straight Adapter

144505459
F6XS25-1: RNCC: 3 | RNVC: 2
91712754: RNCC: 5 | RNVC: 2

9 Oct 1991

4730-14-262-5746
Clapet D Purgeur

142625746
6798: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-254-5951
Tube To Boss Straight Adapter

142545951
1310-6-82: RNCC: 3 | RNVC: 2
1310-6-82: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-560-6192
Fluid Passage Bolt

145606192
X2437745: RNCC: 3 | RNVC: 2
CV149910: RNCC: 5 | RNVC: 2
X2437745: RNCC: 5 | RNVC: 2
97600510: RNCC: 5 | RNVC: 9

5 May 2009

4730-14-503-6800
Quick-Disconnect Nipple

145036800
69271017: RNCC: 3 | RNVC: 2

23 Jan 1998

4730-14-549-2667
Hose To Gas Fitting Straight Adapter

145492667
3001S306: RNCC: 3 | RNVC: 2

16 Mar 2006

4730-14-363-1141
Pipe Flange

143631141
213910: RNCC: 3 | RNVC: 2

3 Apr 1980

4730-14-386-2845
Tube To Boss Straight Adapter

143862845
129841: RNCC: 3 | RNVC: 9

24 Aug 1983

4730-14-240-5829
Fluid Pressure Line Multiple Connector

142405829
109-25-39X150: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-550-4095
Tube To Boss Straight Adapter

145504095
CP107287 5010631176-B: RNCC: 3 | RNVC: 2
5010631176: RNCC: 5 | RNVC: 2
CP107287 5010631176-B: RNCC: 5 | RNVC: 9

19 Jun 2006

4730-14-516-7648
Quick Disconnect Coupling Half

145167648
K12106: RNCC: 3 | RNVC: 2
12106/70: RNCC: 5 | RNVC: 2

13 Oct 1999

4730-14-442-0964
Fluid Pressure Line Multiple Connector

144420964
BM10.06: RNCC: 3 | RNVC: 2
521997: RNCC: 5 | RNVC: 2
521997: RNCC: 5 | RNVC: 9

1 Oct 1990

4730-14-402-2089
Tube To Boss Straight Adapter

144022089
91335888: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-256-5478
Tube To Boss Straight Adapter

142565478
11238960L: RNCC: 3 | RNVC: 2
27ADB2M: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-338-7631
Tube To Boss Straight Adapter

143387631
45708C: RNCC: 3 | RNVC: 9
2548: RNCC: 5 | RNVC: 9

17 Dec 1976

4730-14-450-4968
Tube To Boss Straight Adapter

144504968
BLC235407: RNCC: 3 | RNVC: 2

9 Oct 1991

4730-14-504-0617
Tube Coupling

145040617
NNP4730878750164: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-465-5989
Quick Disconnect Coupling Half

144655989
4000-5: RNCC: 3 | RNVC: 2
4000-5: RNCC: 3 | RNVC: 9

30 Sep 1993

4730-14-315-8652
Pipe Flange

143158652
11233430A: RNCC: 3 | RNVC: 2
23343: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-290-9430
Tube Tee

142909430
5TR10X6X10CL: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-426-7877
Tube Tee

144267877
4730HEING114,3X8,8-60,3X4: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-255-8494
Raccord En T Pour T

142558494
F7910: RNCC: 3 | RNVC: 9

1 Jan 1969

4730-14-270-2094
Fluid Passage Bolt

142702094
180108: RNCC: 3 | RNVC: 2
91200526: RNCC: 5 | RNVC: 2
80108M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-360-5783
Fluid Passage Bolt

143605783
16559497: RNCC: 3 | RNVC: 2
16559497: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-335-9236
Tube To Boss Straight Adapter

143359236
GA70695: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-209-5443
Coude Pour Tube Equ

142095443
17-7-3744: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-549-5422
Sediment Strainer Element

145495422
38806: RNCC: 3 | RNVC: 2

13 Apr 2006

4730-14-480-3251
Self-Sealing Coupling Half

144803251
5400S5-8: RNCC: 3 | RNVC: 2
91719953: RNCC: 5 | RNVC: 2

7 Mar 1996

4730-14-403-5044
Fluid Pressure Line Multiple Connector

144035044
WH08LMB2A: RNCC: 3 | RNVC: 2
WH08LMB2A: RNCC: 5 | RNVC: 2
427380: RNCC: 5 | RNVC: 2
WH08LMB2A: RNCC: 5 | RNVC: 9

21 Aug 1985

4730-14-385-1962
Tube To Boss Straight Adapter

143851962
1375344811: RNCC: 3 | RNVC: 2
DAH1375344811: RNCC: 5 | RNVC: 9

26 Jul 1983

4730-14-521-1759
Special-Shaped Hose Clamp

145211759
3708: RNCC: 3 | RNVC: 9

12 Jul 2000

4730-14-230-7133
Pipe Flange

142307133
GSM1947REP8FEMELLE: RNCC: 3 | RNVC: 2
GSM1947DET8FEMELLE: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-230-7165
Pipe Flange

142307165
GSM1487DET18: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-543-8320
Tube To Boss Straight Adapter

145438320
9450145: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-383-6687
Tube To Boss Straight Adapter

143836687
2095-21: RNCC: 3 | RNVC: 2

11 Apr 1983

4730-14-513-8503
Hose To Grooved Clamp Coupling Straight Adapter

145138503
390528: RNCC: 3 | RNVC: 2
A37525: RNCC: 5 | RNVC: 2

14 Apr 1999

4730-14-398-9337
Flange To Hose Elbow

143989337
234790: RNCC: 3 | RNVC: 2
MAF0001005735: RNCC: 6 | RNVC: 9

6 Mar 1985

4730-14-435-6984
Tube To Hose Straight Adapter

144356984
553655: RNCC: 3 | RNVC: 2

20 Nov 1989

4730-14-514-6356
Tube Union

145146356
18041330087: RNCC: 3 | RNVC: 2

3 Jun 1999

4730-14-230-7140
Pipe Flange

142307140
GSM1947REP15FEMELLE: RNCC: 3 | RNVC: 2
GSM1947DET15FEMELLE: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-396-9157
Tube To Hose Straight Adapter

143969157
CMT30E9004PL1REP6: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-222-2723

4730-14-457-4359
Tube To Boss Straight Adapter

144574359
RM20: RNCC: 3 | RNVC: 2
99146065: RNCC: 5 | RNVC: 2

3 Sep 1992

4730-14-491-8943
Hose To Boss Straight Adapter

144918943
P109299D: RNCC: 3 | RNVC: 2
F300 0T 005 9242: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-371-0511
Tube Tee

143710511
4730AJ4.1DN8EQUIPE: RNCC: 2 | RNVC: 2
8904080066: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-307-8466
Bossage Special

143078466
B252FD2AREP17: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-043-0251
Tube Coupling

140430251
PE60001K10: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-378-6590
Threaded Tube Fitting Plug

143786590
8200700066: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-212-5392
Fluid Passage Bolt

142125392
35170: RNCC: 3 | RNVC: 9

1 Jan 1964

4730-14-374-5966
Tube To Boss Straight Adapter

143745966
5000042438: RNCC: 3 | RNVC: 2
1191697: RNCC: 5 | RNVC: 2
5000042438: RNCC: 5 | RNVC: 9

30 Jan 1982

4730-14-567-1348
Quick Disconnect Coupling Half

145671348
RCS06.1162: RNCC: 3 | RNVC: 2

14 Feb 2011

4730-14-471-9172
Bulkhead Hose Connector

144719172
1/2PPA57-85MM: RNCC: 3 | RNVC: 2

27 Sep 1994

4730-14-277-0018

4730-14-262-2003

4730-14-349-5436

4730-14-418-2301
Tube Coupling

144182301
16042540: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-474-5705
Bulkhead Hose Connector

144745705
3A16CL-S+2CE-NU: RNCC: 3 | RNVC: 2
370 90 30 598 11: RNCC: 5 | RNVC: 2
8003F35970: RNCC: 5 | RNVC: 2
82160001: RNCC: 5 | RNVC: 2

22 Feb 1995

4730-14-427-3316
Tube Tee

144273316
4730HDING219,1X5,6-60,3X2,9: RNCC: 2 | RNVC: 2

13 Oct 1988

4730-14-463-2026
Tube To Boss Straight Adapter

144632026
F4BXS32-1,1/4: RNCC: 3 | RNVC: 2
91741683: RNCC: 5 | RNVC: 9

26 May 1993

4730-14-477-0716
Flexible Tube Coupling Assembly

144770716
T700A2899002002: RNCC: 3 | RNVC: 2

19 Jul 1995

4730-14-411-3841
Raccord Bloc

144113841
DA2C781231001: RNCC: 3 | RNVC: 2

6 Aug 1986

4730-14-377-5631

4730-14-296-7109

4730-14-222-7328

4730-14-259-5030
Water Distribution Nozzle

142595030
E5271-10: RNCC: 3 | RNVC: 2
E6409-7: RNCC: 3 | RNVC: 2
E5271-10: RNCC: 5 | RNVC: 9
E6409-7: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-258-4060
Fluid Pressure Line Multiple Connector

142584060
109-8JE12X100: RNCC: 3 | RNVC: 2
91359125: RNCC: 5 | RNVC: 2
91760618: RNCC: 5 | RNVC: 2
0946750908: RNCC: 5 | RNVC: 2
91359125: RNCC: 5 | RNVC: 2
109-8-5JE12X100: RNCC: 5 | RNVC: 9
946750908: RNCC: 5 | RNVC: 9
MAF0001005826: RNCC: 6 | RNVC: 9

1 Jan 1969

4730-14-500-6620
Tube To Boss Straight Adapter

145006620
XGE12-S-R1-2A3C: RNCC: 3 | RNVC: 2
XGE12SR1-2A3C: RNCC: 3 | RNVC: 2
F300 0T 024 6811: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-561-1424
Tube To Boss Elbow

145611424
EQMA WCO 6-1/4L 315B: RNCC: 3 | RNVC: 2
02100674: RNCC: 5 | RNVC: 2

19 Jun 2009

4730-14-431-4457
Lubrication Fitting

144314457
74704007: RNCC: 3 | RNVC: 2
70-2-4-6X100: RNCC: 5 | RNVC: 2

19 Apr 1989

4730-14-449-5533
Tube Union

144495533
RACCORD SOUD PAR EM S13,5: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-499-5148
Pipe Expansion Joint

144995148
25348702: RNCC: 3 | RNVC: 2
2-534870-2: RNCC: 5 | RNVC: 2
F300 0T 023 0870: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-462-0185
Fluid Flow Restrictor

144620185
D50910R5: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-221-2188
Raccord A Joint Cou

142212188
GSM1297FE6-5TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-387-0682
Croix Tube Ebauche

143870682
4730-50-14: RNCC: 2 | RNVC: 2
ST1675A14: RNCC: 5 | RNVC: 2

24 Aug 1983

4730-14-261-7997
Bouchon

142617997
NO PRIMARY REF14-261-7997: RNCC: 3 | RNVC: 2
228466: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-330-8013
Barillet A 5 Voies

143308013
GSM163-006F7: RNCC: 3 | RNVC: 2
GSM163-06F7: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-241-3277
Bouchon Special

142413277
A1-69815: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-432-3406
Tube To Boss Straight Adapter

144323406
UML-BGS-8-1/4: RNCC: 3 | RNVC: 9

7 Jun 1989

4730-14-426-7190
Fluid Passage Bolt

144267190
800118: RNCC: 3 | RNVC: 2
800118: RNCC: 5 | RNVC: 9

15 Sep 1988

4730-14-556-7313
Tube Nipple

145567313
8471 3226: RNCC: 3 | RNVC: 2

7 Apr 2008

4730-14-571-0925
Water Feeder Manifold

145710925
003322: RNCC: 3 | RNVC: 2

20 Feb 2012

4730-14-515-7029
Quick Disconnect Coupling Half

145157029
12331487: RNCC: 3 | RNVC: 9

27 Jul 1999

4730-14-358-5258
Tube Tee

143585258
406325600: RNCC: 3 | RNVC: 9

7 Sep 1979

4730-14-564-3707
Bulkhead Hose Connector

145643707
MDS81X307: RNCC: 3 | RNVC: 2

27 Apr 2010

4730-14-500-6629
Fluid Pressure Line Multiple Connector

145006629
D64209001001: RNCC: 3 | RNVC: 2
F300 0T 024 6820: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-346-0496
Fluid Passage Bolt

143460496
52S0802401: RNCC: 3 | RNVC: 2
52S0802401: RNCC: 5 | RNVC: 2

5 Nov 1977

4730-14-397-7936
Fluid Pressure Line Multiple Connector

143977936
M4Z7101700201: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-432-1147
Pipe Expansion Joint

144321147
DILATOFLEXKARCN-DN65PN10: RNCC: 3 | RNVC: 2

24 May 1989

4730-14-434-0672
Fluid Pressure Line Multiple Connector

144340672
545064: RNCC: 3 | RNVC: 2

4 Sep 1989

4730-14-515-2925
Fluid Flow Restrictor

145152925
0009037059: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-472-4923
Fluid Passage Bolt

144724923
17A16-22X150S: RNCC: 3 | RNVC: 2
817133127: RNCC: 5 | RNVC: 2
817Z33127: RNCC: 5 | RNVC: 2
917133127: RNCC: 5 | RNVC: 2
5000924178: RNCC: 5 | RNVC: 2

26 Oct 1994

4730-14-490-1001
Tube To Boss Straight Adapter

144901001
SIMMAA1001000F5AREP4: RNCC: 3 | RNVC: 2

11 Sep 1997

4730-14-463-5487
Tube To Boss Straight Adapter

144635487
TID8048: RNCC: 3 | RNVC: 2

17 Jun 1993

4730-14-468-6402
Tube To Boss Straight Adapter

144686402
008685035P: RNCC: 3 | RNVC: 2

15 Mar 1994

4730-14-523-3091
Flexible Tube Coupling Assembly

145233091
9401GCG50242: RNCC: 3 | RNVC: 2

10 Jan 2001

4730-14-332-0641
Bulkhead Hose Connector

143320641
R6SX8Z56: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-392-9355
Tube To Boss Straight Adapter

143929355
0024248624: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-544-0665
Tube Union

145440665
AMPC-CEGE166401: RNCC: 3 | RNVC: 2

3 Jan 2005

4730-14-291-3923
Pipe Flange

142913923
0235220330: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-416-6021
Pipeline Flexible Spacer

144166021
DLT602423: RNCC: 3 | RNVC: 2

19 Jun 1987

4730-14-227-3201
Coude Passant

142273201
246852: RNCC: 3 | RNVC: 2
476A270: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-365-9447

4730-14-317-8790

4730-14-425-7447

4730-14-260-9113
Pipe Flange

142609113
7062CA1F1-108AF42-2: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-510-1149
Self-Sealing Coupling Half

145101149
F726-004: RNCC: 3 | RNVC: 2
4730AA8008019: RNCC: 6 | RNVC: 9

4 Nov 1998

4730-14-525-5018
Pipe Flange

145255018
A88140236: RNCC: 3 | RNVC: 2

6 Jun 2001

4730-14-399-0356
Tube Tee

143990356
E01372-91: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-223-2884
Bague Bicone Raccor

142232884
A10-77-060-09-0: RNCC: 3 | RNVC: 2
A10-77-060-09-0: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-333-5150
Barillet A 5 Voies

143335150
GSM163-006BF23: RNCC: 3 | RNVC: 2
GSM163-06BF23: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-365-2792

4730-14-515-7557
Trop-Plein Banc Us

145157557
890906000107519A: RNCC: 3 | RNVC: 2

28 Jul 1999

4730-14-233-8744
Demi-Noix Raccord

142338744
86513: RNCC: 3 | RNVC: 2
9567158100: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-535-3223

4730-14-362-0506

4730-14-233-6040

4730-14-316-9284
Embout De Purge

143169284
466-8M4P131A: RNCC: 3 | RNVC: 2
466-8M4P131A: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-360-9381
Tube To Boss Straight Adapter

143609381
742: RNCC: 3 | RNVC: 2

19 Dec 1979

4730-14-278-2108
Tube To Boss Straight Adapter

142782108
42523: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-360-0793
Raccord Orientable

143600793
16220: RNCC: 3 | RNVC: 2

31 Oct 1979

4730-14-412-1946
Fluid Filter Element

144121946
CH0402803653N00: RNCC: 3 | RNVC: 2
CH0402-803-653N00: RNCC: 5 | RNVC: 9
980495: RNCC: 5 | RNVC: 9

8 Oct 1986

4730-14-431-7476
Pipe Flange

144317476
E29203-01B-PN16DN350Z2CND17-12: RNCC: 2 | RNVC: 2
4730HADN350: RNCC: 5 | RNVC: 2

10 May 1989

4730-14-516-4398
Tube Union

145164398
MAT162-0232F7REPM: RNCC: 3 | RNVC: 2
NO PRIMARY REF14-516-4398: RNCC: 3 | RNVC: 2
1851393: RNCC: 5 | RNVC: 2
GRIP L 139.0NBR INOX: RNCC: 5 | RNVC: 2

24 Sep 1999

4730-14-435-0919
Hose To Boss Straight Adapter

144350919
853-700-507-0: RNCC: 3 | RNVC: 2

18 Oct 1989

4730-14-479-2432
Pipe Flange

144792432
LN320-039F8-DN65: RNCC: 3 | RNVC: 2
23MEFM320000 311: RNCC: 5 | RNVC: 2
LN320-039DN65: RNCC: 5 | RNVC: 2
RAB1483: RNCC: 5 | RNVC: 2
RAB9341: RNCC: 5 | RNVC: 2

20 Dec 1995

4730-14-516-5156
Reducteur Pour Tube

4730-14-561-8205
Tube To Boss Elbow

145618205
1809 12 13: RNCC: 3 | RNVC: 2
010233: RNCC: 5 | RNVC: 2

9 Sep 2009

4730-14-214-1701

4730-14-275-6842

4730-14-564-5068
Hose Coupling

145645068
4895107: RNCC: 3 | RNVC: 2

3 May 2010

4730-14-493-8094
Union

144938094
J37303: RNCC: 3 | RNVC: 2
F300 0T 014 1073: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-335-9215

4730-14-308-9016

4730-14-510-8632
Tube Union

145108632
309-137-601-0: RNCC: 3 | RNVC: 2

18 Nov 1998

4730-14-464-5431
Tuyau Collier

4730-14-512-4725

4730-14-482-1556
Adaptateur Manchon

4730-14-440-5389
Tube Coupling

144405389
A016060 04 04: RNCC: 3 | RNVC: 2
RAR1450: RNCC: 5 | RNVC: 2
2270G13G13: RNCC: 5 | RNVC: 9

17 Jul 1990

4730-14-492-0496
Graisseur

144920496
4300002: RNCC: 3 | RNVC: 9
F300 0T 006 7637: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-575-9522
Pipe Locknut

145759522
394.03.08: RNCC: 3 | RNVC: 2

17 May 2013

4730-14-449-5534
Tube Union

144495534
RACCORD SOUD PAR EM L17,2: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-253-7884

4730-14-522-5556

4730-14-522-5450

4730-14-518-9399
Tu Droit Adaptateur

4730-14-349-8396

4730-14-378-6520

4730-14-419-0169

4730-14-569-5674
Pipe To Tube Tee

145695674
TMJ 9/16: RNCC: 3 | RNVC: 2
4642: RNCC: 5 | RNVC: 2

28 Sep 2011

4730-14-516-4394
Tube Union

145164394
NO PRIMARY REF14-516-4394: RNCC: 3 | RNVC: 2
MAT162-0232F7REPE: RNCC: 3 | RNVC: 2
GRIP L 88.9NBR INOX: RNCC: 5 | RNVC: 2
1850883: RNCC: 5 | RNVC: 2

24 Sep 1999

4730-14-411-9597

4730-14-416-4169
Coude Pour Tube

4730-14-211-8368
Embout Pour Graisse

142118368
05149: RNCC: 3 | RNVC: 9
FL056149: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-220-7228

4730-14-503-1575
Self-Sealing Coupling Assembly

145031575
C25266000: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-427-2596
Tube To Hose Straight Adapter

144272596
1 16 09612 XX: RNCC: 3 | RNVC: 2

6 Oct 1988

4730-14-248-9524
Fluid Pressure Line Multiple Connector

142489524
109-8-2NN: RNCC: 3 | RNVC: 2
42500016: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-428-5850
Equipe Flasque

144285850
SBE1036: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-358-8632
Corps Raccordement

143588632
HS1056B: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-225-5903

4730-14-329-8265
Fluid Pressure Line Multiple Connector

143298265
0235221100: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-400-2624
Fluid Passage Bolt

144002624
0301011170: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-215-9740
Siphon

142159740
614: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-232-8865

4730-14-367-3770

4730-14-330-0638

4730-14-409-8173
Pour Tube Bride

4730-14-412-7417

4730-14-407-3770

4730-14-424-7057
Tu Droit Adaptateur

4730-14-432-9811

4730-14-402-8906

4730-14-431-4042
Tube Union

144314042
NO PRIMARY REF14-431-4042: RNCC: 3 | RNVC: 2
36090MF1/2-10X1INOX: RNCC: 5 | RNVC: 9

17 Apr 1989

4730-14-407-6951
Bulkhead Hose Connector

144076951
NO PRIMARY REF14-407-6951: RNCC: 3 | RNVC: 2
0329-1302-383-1-2-6: RNCC: 5 | RNVC: 9

27 Feb 1986

4730-14-426-7972
Tube Tee

144267972
4730HEING219,1X12,5-139,7X10: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-508-1144
Tube To Boss Straight Adapter

145081144
4918-2-202: RNCC: 3 | RNVC: 2

26 Aug 1998

4730-14-340-1169

4730-14-567-0930
Tube Tee

145670930
221EB212: RNCC: 3 | RNVC: 2
A231004000526: RNCC: 5 | RNVC: 2

7 Feb 2011

4730-14-282-1326

4730-14-251-2862

4730-14-274-0657

4730-14-485-4381
Tuyau Collier

4730-14-567-2769
Hose Expansion Ring

145672769
3447-0301: RNCC: 3 | RNVC: 2

1 Mar 2011

4730-14-223-0130
Bouchon Filete

142230130
A413-90: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-438-5877
Tube To Boss Straight Adapter

144385877
LL130-CK30S: RNCC: 3 | RNVC: 2
8176300066: RNCC: 5 | RNVC: 2

27 Mar 1990

4730-14-333-5247
Barillet A 6 Voies

143335247
GSM163-023F10: RNCC: 3 | RNVC: 2
GSM163-23F10: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-410-7720
Quick Disconnect Coupling Half

144107720
RBE06-1101/IA/9: RNCC: 3 | RNVC: 2
RBE06-1101IA9: RNCC: 5 | RNVC: 2

9 Jul 1986

4730-14-397-0236
Quick Disconnect Coupling Half

143970236
RBE11-1102/OD/IC: RNCC: 3 | RNVC: 2
RBE11-1102-0DIC: RNCC: 5 | RNVC: 2

1 Dec 1984

4730-14-576-5371
Tube Union

145765371
350A95-3200-20: RNCC: 3 | RNVC: 2

24 Jun 2013

4730-14-381-8453
Threaded Tube Fitting Plug

143818453
16170423: RNCC: 3 | RNVC: 2
16170423: RNCC: 5 | RNVC: 9

25 Jan 1983

4730-14-539-1085
Lubrication Fitting

145391085
NGM0099086023660: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-235-2980
Tube To Boss Straight Adapter

142352980
91051722: RNCC: 3 | RNVC: 2
A2-17-15-21BR: RNCC: 5 | RNVC: 9
A2-17-15-21C0BR: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-565-2220
Tube Tee

145652220
836.075.075 S: RNCC: 3 | RNVC: 2
SA17610: RNCC: 5 | RNVC: 2

28 Jul 2010

4730-14-332-6725
Tube To Boss Straight Adapter

143326725
GSM514-001F48: RNCC: 3 | RNVC: 2
GSM514-01F48: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-410-7725
Quick Disconnect Coupling Half

144107725
RBA06-6809/IA: RNCC: 3 | RNVC: 2
RBA6-6809IA: RNCC: 5 | RNVC: 2

9 Jul 1986

4730-14-414-2676
Self-Sealing Coupling Half

144142676
50126092: RNCC: 3 | RNVC: 2
5012-60-92: RNCC: 5 | RNVC: 9
50126092: RNCC: 5 | RNVC: 9

28 Jan 1987

4730-14-305-6250
Tube To Boss Straight Adapter

143056250
9105273547: RNCC: 3 | RNVC: 2
I2-27-26-34BR: RNCC: 5 | RNVC: 9
I2-27-26X34BRHP: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-479-2777
Threaded Tube Fitting Plug

144792777
702A30-0516-20: RNCC: 3 | RNVC: 2

3 Jan 1996

4730-14-209-1801
Raccord Equipe

142091801
3130S73-86-230: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-382-8308
Tube Tee

143828308
GSM164-012F35: RNCC: 3 | RNVC: 2
Q1-5TR30X30X14NNNU: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-276-6392
Tube To Boss Straight Adapter

142766392
ES1-52-4TF: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-479-5459
Lubrication Fitting

144795459
7029-309: RNCC: 3 | RNVC: 2
E5580006: RNCC: 5 | RNVC: 2
5580006: RNCC: 5 | RNVC: 9
ALG7029-309: RNCC: 5 | RNVC: 9

19 Jan 1996

4730-14-462-7687
Fluid Pressure Line Multiple Connector

144627687
1514789: RNCC: 3 | RNVC: 2
85-694-4197: RNCC: 6 | RNVC: 9

28 Apr 1993

4730-14-297-8948
Bloc De Derivation

142978948
411MA0162FA16: RNCC: 3 | RNVC: 2
411MA162FA16: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-398-5848
Tube Tee

143985848
GSM164-052F4: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-307-5039
Fluid Pressure Line Multiple Connector

143075039
E4M712-12-01: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-428-8639
Quick Disconnect Coupling Half

144288639
RBE6S001-106-86: RNCC: 3 | RNVC: 2
2427438040: RNCC: 5 | RNVC: 2
2427438040: RNCC: 5 | RNVC: 9

22 Dec 1988

4730-14-535-5245
Pipe Flange

145355245
360A55-1076-20: RNCC: 3 | RNVC: 2

31 May 2003

4730-14-431-1540
Pipe Flange

144311540
6784-1DR38A: RNCC: 3 | RNVC: 9

10 Apr 1989

4730-14-371-0457
Tube Fitting Clinch Sleeve

143710457
4730AB4.6DN10: RNCC: 2 | RNVC: 2
6016022449: RNCC: 3 | RNVC: 2
84241000: RNCC: 5 | RNVC: 2
LL001-CS10S: RNCC: 5 | RNVC: 2

5 Jun 1981

4730-14-397-7046
Pipe Flange

143977046
MAT147-0043F10: RNCC: 3 | RNVC: 2
GSM147-004F14NUE: RNCC: 3 | RNVC: 9
MAT147-0044: RNCC: 4 | RNVC: 1

14 Dec 1984

4730-14-262-1691
Pipe Flange

142621691
7062DL1F1M36-4XC18: RNCC: 2 | RNVC: 2
MEC10318: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-443-2877
Tube To Boss Straight Adapter

144432877
LL9120-10-18S: RNCC: 3 | RNVC: 2
9120-10-18: RNCC: 5 | RNVC: 2
AA10X3/8B65N: RNCC: 5 | RNVC: 9

14 Nov 1990

4730-14-536-0144

4730-14-378-6542

4730-14-339-9753
Pipe Flange

143399753
GSM162-009F11: RNCC: 3 | RNVC: 2
GSM162-09F11: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-457-6992
Pipe Joint Welding Ring

144576992
BN329514DN15INOX: RNCC: 3 | RNVC: 2
BN329-514DN15INOXEXTRUDE: RNCC: 3 | RNVC: 2

15 Sep 1992

4730-14-438-7413
Pipe Joint Welding Ring

144387413
LN324-079REP12: RNCC: 3 | RNVC: 2
LN324-079F7REP12: RNCC: 5 | RNVC: 2

3 Apr 1990

4730-14-351-9121
Fluid Passage Bolt

143519121
7561569000: RNCC: 3 | RNVC: 2
7561569000: RNCC: 5 | RNVC: 2
75-61-569-000: RNCC: 5 | RNVC: 9

16 Oct 1978

4730-14-218-4240
Fluid Passage Bolt

142184240
NO PRIMARY REF14-218-4240: RNCC: 3 | RNVC: 2
NMGVU80TVRS8: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-418-4684
Tube Tee

144184684
4-455104: RNCC: 3 | RNVC: 9
4-455104: RNCC: 5 | RNVC: 2
4-455104: RNCC: 5 | RNVC: 9

26 Aug 1987

4730-14-450-4062
Quick Disconnect Coupling Half

144504062
PIO06-6806: RNCC: 3 | RNVC: 2
PIO6-6806: RNCC: 5 | RNVC: 2

4 Oct 1991

4730-14-271-1391
Corps Raccord

142711391
82300: RNCC: 3 | RNVC: 2
650-485-249-0: RNCC: 5 | RNVC: 2
501-786-075-0: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-406-4600
Bulkhead Hose Connector

144064600
FD1C781-31: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-435-0557
Pipe Flange

144350557
MAT162-0060F14: RNCC: 3 | RNVC: 2

17 Oct 1989

4730-14-488-5159
Tube Coupling

144885159
DHS613-618-41: RNCC: 3 | RNVC: 2

14 May 1997

4730-14-373-2943
Hydraulic Swivel Joint

143732943
A101-24660: RNCC: 3 | RNVC: 2

21 Oct 1981

4730-14-260-0848
Fluid Passage Bolt

142600848
321A75-0859-20: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-343-5544
Bride Intercalaire

143435544
LABESSEA9930M48: RNCC: 3 | RNVC: 2
A9930M48: RNCC: 5 | RNVC: 9

16 Jun 1977

4730-14-557-5573
Tube Elbow

145575573
7421091226: RNCC: 1 | RNVC: 2
WEE06LMVOMDCF: RNCC: 3 | RNVC: 2

20 Jun 2008

4730-14-282-1912

4730-14-349-5935
Tube Tee

143495935
721-200-111: RNCC: 3 | RNVC: 2
21-20-01DN63: RNCC: 5 | RNVC: 2
285-6221: RNCC: 5 | RNVC: 2
721-200-111: RNCC: 5 | RNVC: 2

22 May 1978

4730-14-376-0336
Equip Droit Raccord

143760336
3605-16E: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-402-9116
Tube Union

144029116
NO PRIMARY REF14-402-9116: RNCC: 3 | RNVC: 2
69031194: RNCC: 5 | RNVC: 9

25 Jul 1985

4730-14-233-3335
Bride

142333335
3160S29-08-533: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-353-4865
Tube To Boss Straight Adapter

143534865
NO PRIMARY REF14-353-4865: RNCC: 3 | RNVC: 2
3197131: RNCC: 5 | RNVC: 2
3197131: RNCC: 5 | RNVC: 9

16 Jan 1979

4730-14-518-2056
Flange To Hose Elbow

145182056
8863/21: RNCC: 3 | RNVC: 2
8863/21: RNCC: 5 | RNVC: 2
RU.8863: RNCC: 5 | RNVC: 2
RU8863: RNCC: 5 | RNVC: 2

26 Jan 2000

4730-14-262-2445
Raccord Intermediai

142622445
6332727: RNCC: 3 | RNVC: 2
PA361-122M21P19: RNCC: 3 | RNVC: 9
6332727: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-328-8972

4730-14-304-9342

4730-14-449-1950
Filtre Bouchon

144491950
BB0569: RNCC: 3 | RNVC: 2

7 Aug 1991

4730-14-464-5401
Tuyau Collier

4730-14-467-3596
Tuyau Collier

4730-14-338-0820
Tube To Boss Straight Adapter

143380820
5-3601P32A: RNCC: 3 | RNVC: 2
5-3601P32A: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-414-6820
Threaded Tube Fitting Plug

144146820
4730HK-BSC13,5: RNCC: 2 | RNVC: 2
MEC10519: RNCC: 3 | RNVC: 2

24 Feb 1987

4730-14-421-2153
Tube To Gas Fitting Straight Adapter

144212153
UMIWC010-1/4: RNCC: 3 | RNVC: 9

8 Jan 1988

4730-14-325-8393
Tube Tee

143258393
R7616Z76: RNCC: 3 | RNVC: 2
R16X16MX16: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-304-6990
Fluid Flow Restrictor Unit

143046990
705919: RNCC: 3 | RNVC: 2
705919: RNCC: 5 | RNVC: 2
705919: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-513-2234
Threaded Tube Fitting Plug

145132234
64308216: RNCC: 3 | RNVC: 2

10 Mar 1999

4730-14-388-5037
Tube To Boss Straight Adapter

143885037
414256: RNCC: 3 | RNVC: 9

3 Nov 1983

4730-14-481-0947
Tube To Boss Straight Adapter

144810947
P156T06: RNCC: 3 | RNVC: 2
717.T.06.10X1,00: RNCC: 3 | RNVC: 2
74717T06: RNCC: 5 | RNVC: 2
717 T 06 10X1,00: RNCC: 5 | RNVC: 2
717T06: RNCC: 5 | RNVC: 2
74717T06: RNCC: 5 | RNVC: 2

18 Apr 1996

4730-14-545-2520
Non-Metallic Connecting Sleeve

145452520
S215A30A1003: RNCC: 1 | RNVC: 2
151977-1: RNCC: 3 | RNVC: 2

29 Mar 2005

4730-14-576-2098
Pipe Elbow

145762098
NSA855020-4: RNCC: 1 | RNVC: 2
NSA855020-4: RNCC: 3 | RNVC: 2
NSA855020-4: RNCC: 5 | RNVC: 2

6 Jun 2013

4730-14-043-0987
Adapt De Prehuilage

4730-14-362-4089
Tube-Hose Fitting Compression Sleeve

143624089
91242200: RNCC: 3 | RNVC: 2
BAH22: RNCC: 5 | RNVC: 9

19 Mar 1980

4730-14-405-5843
Tube Coupling

144055843
M4Z7101919220: RNCC: 3 | RNVC: 2

4 Dec 1985

4730-14-504-8035
Quick Disconnect Coupling Half

145048035
N00629196: RNCC: 3 | RNVC: 2

4 Mar 1998

4730-14-368-8794
Pipe Flange

143688794
CMT20E4003D330REP3BRONZE: RNCC: 3 | RNVC: 2
CMT20E4003D330REPBBR0NZE: RNCC: 5 | RNVC: 2

10 Mar 1981

4730-14-377-5070
Tube To Boss Straight Adapter

143775070
31750817: RNCC: 3 | RNVC: 2

17 May 1982

4730-14-392-9615
Fluid Pressure Line Multiple Connector

143929615
1111519000: RNCC: 3 | RNVC: 2
5010046756: RNCC: 5 | RNVC: 2
5000802627: RNCC: 5 | RNVC: 2
DAH1111519000: RNCC: 5 | RNVC: 9

7 Apr 1984

4730-14-503-1716
Bulkhead Hose Connector

145031716
RA1M533006181U2: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-374-8669
Tube To Boss Straight Adapter

143748669
4110-949: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-349-2556
Fluid Passage Bolt

143492556
5000496058: RNCC: 3 | RNVC: 2
5000496058: RNCC: 5 | RNVC: 9
5000496058: RNCC: 6 | RNVC: 9

22 May 1978

4730-14-307-5168

4730-14-406-1086
Fluid Passage Bolt

144061086
208-09519-00: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-441-5693
Tube Union

144415693
LN320-036REP08: RNCC: 3 | RNVC: 2
1901330: RNCC: 3 | RNVC: 2
STRAUB-FLEX1L133EPDM/ACIER: RNCC: 5 | RNVC: 2
FLEX1L133PN14EPDM/ACIER: RNCC: 5 | RNVC: 2
190 1330: RNCC: 5 | RNVC: 9

4 Sep 1990

4730-14-503-2099
Tube To Boss Straight Adapter

145032099
P161T0808S: RNCC: 3 | RNVC: 2
721.T.08.08S: RNCC: 3 | RNVC: 2
74721T0808S: RNCC: 5 | RNVC: 2
721 T 08 08S: RNCC: 5 | RNVC: 2
721T08 08S: RNCC: 5 | RNVC: 2
721T08-08S: RNCC: 5 | RNVC: 2
721T0808S: RNCC: 5 | RNVC: 2
74721T0808S: RNCC: 5 | RNVC: 2

7 Jan 1998

4730-14-534-0784
Bulkhead Hose Connector

145340784
DHS613-643-64: RNCC: 3 | RNVC: 2

12 Mar 2003

4730-14-262-1567
Pipe Flange

142621567
7062DJ1F1F66-5XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-350-8437
Raccord Acier

143508437
9090411: RNCC: 3 | RNVC: 2
9090411: RNCC: 5 | RNVC: 9

12 Jul 1978

4730-14-464-5411
Tuyau Collier

4730-14-562-1551
Fluid Pressure Line Multiple Connector

145621551
3538 06 10: RNCC: 3 | RNVC: 2
FS0002432: RNCC: 6 | RNVC: 9

2 Oct 2009

4730-14-213-0762

4730-14-361-5756

4730-14-268-6407

4730-14-578-3773
Swivel Flange To Hose Connector

145783773
62160020AA: RNCC: 3 | RNVC: 2

25 Nov 2013

4730-14-411-7555
Creux Boulon

4730-14-554-4409
Hose To Boss Straight Adapter

145544409
09930232: RNCC: 3 | RNVC: 2

5 Jul 2007

4730-14-315-9518

4730-14-540-1181
Pipe Flange

145401181
0212130706: RNCC: 3 | RNVC: 2
90730: RNCC: E | RNVC: 8

10 Mar 2004

4730-14-494-5546
Quick Disconnect Coupling Assembly

144945546
643 485 521: RNCC: 3 | RNVC: 2
F300 0T 017 4726: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-488-8645
Hose To Boss Straight Adapter

144888645
E4750090: RNCC: 3 | RNVC: 9

10 Jun 1997

4730-14-287-3249

4730-14-277-7548

4730-14-260-9212

4730-14-426-7676
Tube Tee

144267676
4730HEING042,4X5-21,3X2,6: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-226-9386
Tube Coupling

142269386
576-408-012-0: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-260-9147
Pipe Flange

142609147
7062CB1F2-48AF42-2: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-528-1329
Jeu De 4 Raccords

145281329
ACL287-02: RNCC: 3 | RNVC: 9

20 Dec 2001

4730-14-430-7498
Tube To Boss Straight Adapter

144307498
68506-961-1: RNCC: 3 | RNVC: 2
68506-961-1: RNCC: 5 | RNVC: 9

22 Mar 1989

4730-14-263-6348

4730-14-262-8783

4730-14-233-1459
Bouchon De Tube

142331459
7813029000: RNCC: 3 | RNVC: 2
1414-05: RNCC: 3 | RNVC: 2
600514: RNCC: 5 | RNVC: 2
7813029000: RNCC: 5 | RNVC: 2
160325: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-425-6447

4730-14-425-7305

4730-14-424-3549
Union Pour Tube

4730-14-520-2560
Special-Shaped Hose Clamp

145202560
201320: RNCC: 3 | RNVC: 2

17 May 2000

4730-14-031-1566
Tube To Boss Straight Adapter

140311566
VDP2986: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-488-1801
Flange To Grooved Clamp Straight Adapter

144881801
974324: RNCC: 3 | RNVC: 2
974324: RNCC: 5 | RNVC: 9

21 Apr 1997

4730-14-385-7288
Tube To Boss Straight Adapter

143857288
8120222199: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-522-9696
Flange To Tube Straight Adapter

145229696
0000372240: RNCC: 3 | RNVC: 2

13 Dec 2000

4730-14-450-4979
Tube To Boss Straight Adapter

144504979
BLC23689: RNCC: 3 | RNVC: 2

9 Oct 1991

4730-14-543-0591
Pipe Flange

145430591
430710076: RNCC: 3 | RNVC: 2
430710076: RNCC: 5 | RNVC: 2

18 Aug 2004

4730-14-400-9506
Bulkhead Hose Connector

144009506
DA2C203520510: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-298-9703
Fluid Pressure Line Multiple Connector

142989703
150317: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-460-3610
Tube Tee

144603610
10RA18L12L18LNU: RNCC: 3 | RNVC: 2
91632352: RNCC: 5 | RNVC: 2

21 Jan 1993

4730-14-467-7982
Tube To Hose Straight Adapter

144677982
MB2474F00: RNCC: 3 | RNVC: 2

27 Jan 1994

4730-14-295-1816
Tube Tee

142951816
57-8NNRR: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-339-9889
Tube To Boss Straight Adapter

143399889
361300: RNCC: 3 | RNVC: 2

18 Jan 1977

4730-14-484-3227
Fuel Feeder Manifold

144843227
0390707110: RNCC: 3 | RNVC: 2

7 Nov 1996

4730-14-244-0229
Tube Tee

142440229
5TR14X10X14: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-498-5957
Tube To Boss Straight Adapter

144985957
105346LT20046: RNCC: 3 | RNVC: 2
FOE105346LT20046: RNCC: 5 | RNVC: 9
481135: RNCC: 5 | RNVC: 9
F300 0T 005 8935: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-385-2233
Fluid Pressure Line Multiple Connector

143852233
9418208358: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-355-5319
Tube Coupling Assembly

143555319
3601SB20A: RNCC: 3 | RNVC: 2
3601SB20A: RNCC: 5 | RNVC: 9

19 Mar 1979

4730-14-538-9667
Return Tube Bend

145389667
NGM0053236506743: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-388-5393
Quick Disconnect Wye

143885393
PZCE744: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-554-0996
Pipe Flange

145540996
604 115: RNCC: 3 | RNVC: 2
604 115: RNCC: 3 | RNVC: 2

11 Jun 2007

4730-14-503-2024
Hose Coupling Assembly

145032024
RP1A500053320: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-535-2547
Quick Disconnect Coupling Half

145352547
0186 05 13: RNCC: 3 | RNVC: 2
01860513: RNCC: 5 | RNVC: 2

14 May 2003

4730-14-230-6132
Tube To Boss Straight Adapter

142306132
0000136387: RNCC: 3 | RNVC: 2
0000136387: RNCC: 5 | RNVC: 9
136387: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-224-3905
Tube Fitting Brazing Ferrule

142243905
GSM163-002DETHB: RNCC: 3 | RNVC: 2
GSM163-02DETHB: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-364-7561
Tube Coupling

143647561
NO PRIMARY REF14-364-7561: RNCC: 3 | RNVC: 2
100014095: RNCC: 5 | RNVC: 9

2 Sep 1980

4730-14-473-0443
Quick Disconnect Coupling Half

144730443
RBE06-715IC-JV-SP: RNCC: 3 | RNVC: 2
S009-252-94: RNCC: 5 | RNVC: 2
RBE06 715/IC/JV/SP: RNCC: 5 | RNVC: 2
RBE06.715 M10X1/IC/JV: RNCC: 5 | RNVC: 2

6 Dec 1994

4730-14-414-8930
Pipe Expansion Joint

144148930
NO PRIMARY REF14-414-8930: RNCC: 3 | RNVC: 2
D20429: RNCC: 5 | RNVC: 9

18 Mar 1987

4730-14-336-7913
Fluid Passage Bolt

143367913
5122-24-09: RNCC: 3 | RNVC: 2

7 Oct 1976

4730-14-472-7375
Raccord De Valve

144727375
22619-000-01: RNCC: 3 | RNVC: 2
Z00.N7730262620: RNCC: 5 | RNVC: 2
Z00.N7730262620TBM: RNCC: 5 | RNVC: 9
Z00.N7730262619: RNCC: 5 | RNVC: 9
Z00.N7730262619TBM: RNCC: 5 | RNVC: 9

9 Nov 1994

4730-14-331-5995
Tube-Hose Fitting Compression Sleeve

143315995
J00650-01-0300P012: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-253-0778
Bouchon Special

142530778
T0P7G514: RNCC: 3 | RNVC: 2
60-0196: RNCC: 5 | RNVC: 2
TOP7G514: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-041-1893
Tube Fitting Clinch Sleeve

140411893
205-44-5: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-268-6365
Tube To Boss Straight Adapter

142686365
G12-21-21-27CYL: RNCC: 3 | RNVC: 2
4AG21-21-27N: RNCC: 3 | RNVC: 2
55016: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-252-2490
Lubricating Oil Cup

142522490
NO PRIMARY REF14-252-2490: RNCC: 3 | RNVC: 2
GB13: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-232-0161
Fluid Passage Bolt

142320161
3560-20XC18CD: RNCC: 3 | RNVC: 2
2426: RNCC: 5 | RNVC: 1

1 Jan 1967

4730-14-241-5870
Quick Disconnect Coupling Assembly

142415870
SS1-40BDB: RNCC: 3 | RNVC: 2
SS12-38X40: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-251-3932
Fluid Pressure Line Multiple Connector

142513932
9776000539: RNCC: 3 | RNVC: 2
85-692-0081: RNCC: 6 | RNVC: 9

1 Jan 1968

4730-14-041-3784

4730-14-397-1344
Prise De Man Embout

143971344
413159: RNCC: 3 | RNVC: 2
413159: RNCC: 5 | RNVC: 2
413159: RNCC: 5 | RNVC: 9

1 Dec 1984

4730-14-351-6568

4730-14-566-0321
Tube Tee

145660321
91176: RNCC: 3 | RNVC: 2
438036: RNCC: 5 | RNVC: 2

13 Oct 2010

Load More Results