What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 50 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 50 of 185

4730-14-546-8864
Hose Clamp

145468864
1720R: RNCC: 3 | RNVC: 2

1 Sep 2005

4730-14-393-3109
Tube Reducer

143933109
4730GE48,3-38: RNCC: 2 | RNVC: 2
BN324-553F6-48,3X38: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-505-7282
Tube Elbow

145057282
45JIC1 2-1 4C0: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-413-8505
Tube Elbow

144138505
4730HJCOUR903D088,9X8: RNCC: 2 | RNVC: 2
3D90-88,9X8Z2CND17-12T3A49282: RNCC: 5 | RNVC: 2

21 Jan 1987

4730-14-400-1516
Tube Nipple

144001516
NO PRIMARY REF14-400-1516: RNCC: 3 | RNVC: 2
812543: RNCC: 5 | RNVC: 9

24 Apr 1985

4730-14-357-5937
Tube To Hose Elbow

143575937
G15-13-15-21CO: RNCC: 3 | RNVC: 2
6270662: RNCC: 3 | RNVC: 2
8AG13-15-21CO: RNCC: 3 | RNVC: 2
G15-13-15-21C0NN: RNCC: 3 | RNVC: 2
5927275: RNCC: 5 | RNVC: 2
CMCAG13X15-21N: RNCC: 5 | RNVC: 2

27 Jun 1979

4730-14-328-2595
Tube Elbow

143282595
ZA29D0AC: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-444-8782
Hose Clamp

144448782
E27852GC045050Y: RNCC: 2 | RNVC: 2
DSG50: RNCC: 3 | RNVC: 2
DGH50: RNCC: 3 | RNVC: 2
5999044: RNCC: 5 | RNVC: 2

28 Jan 1991

4730-14-542-1734
Hose Coupling

145421734
470432608: RNCC: 3 | RNVC: 2
470432608: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-217-0891
Tube Elbow

142170891
1509-14-20X150: RNCC: 3 | RNVC: 2
5156237900: RNCC: 5 | RNVC: 2
1509-14-20X150NN-79227: RNCC: 5 | RNVC: 2
1509-14-20X150NN: RNCC: 5 | RNVC: 2
NH1509-14-20X150: RNCC: 5 | RNVC: 2
562379: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-367-6390
Pipe True Wye

143676390
F08501-08: RNCC: 3 | RNVC: 2
E4506-494: RNCC: 5 | RNVC: 2
F08501-08: RNCC: 5 | RNVC: 2

19 Jan 1981

4730-14-360-6339
Tube Reducer

143606339
NO PRIMARY REF14-360-6339: RNCC: 3 | RNVC: 2
12330-371: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-446-6928
Tube Elbow

144466928
75A25-21-27CYLNU: RNCC: 3 | RNVC: 2

9 Apr 1991

4730-14-328-0086
Tube Elbow

143280086
9139147827: RNCC: 3 | RNVC: 2
L9-14-18X150: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-481-0849
Hose Clamp

144810849
FX13M370-390-R: RNCC: 3 | RNVC: 2
SERFX13M370-390-R: RNCC: 5 | RNVC: 9

18 Apr 1996

4730-14-403-0465
Tube To Hose Elbow

144030465
29739162: RNCC: 3 | RNVC: 2
29739162: RNCC: 5 | RNVC: 9

25 Jul 1985

4730-14-405-1813
Tube Nipple

144051813
9882400080: RNCC: 3 | RNVC: 2
5WMTXWLNMS: RNCC: 3 | RNVC: 2
5WMTXWLNMS: RNCC: 3 | RNVC: 2
5WTX-WLNS: RNCC: 5 | RNVC: 2
WTXWLNS8: RNCC: 5 | RNVC: 2
5WTXS: RNCC: 5 | RNVC: 9
3-35-1573-0: RNCC: 5 | RNVC: 9
33515730: RNCC: 5 | RNVC: 9
4730-AA-1087422: RNCC: 6 | RNVC: 9
85-692-6380: RNCC: 6 | RNVC: 9

27 Nov 1985

4730-14-446-6074
Packing Nut

144466074
NO PRIMARY REF14-446-6074: RNCC: 3 | RNVC: 2
441116: RNCC: 5 | RNVC: 9

3 Apr 1991

4730-14-256-9303
Tube Elbow

142569303
NO PRIMARY REF14-256-9303: RNCC: 3 | RNVC: 2
418153: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-531-1774
Tube Nipple

145311774
0116-05-00: RNCC: 3 | RNVC: 2

30 Jul 2002

4730-14-513-8919
Hose Nipple

145138919
157808: RNCC: 3 | RNVC: 2

14 Apr 1999

4730-14-535-4590
Tube To Hose Elbow

145354590
3889 06 13: RNCC: 3 | RNVC: 2
3889-06-13: RNCC: 5 | RNVC: 2

26 May 2003

4730-14-440-6120
Pipeline Adapter

144406120
81082-68: RNCC: 3 | RNVC: 2
91595194: RNCC: 5 | RNVC: 2

18 Jul 1990

4730-14-330-8986
Tube Coupling Nut

143308986
J00650-01-0210P003: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-346-3749
Tank Bushing

143463749
262-50-55660-01: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-489-6019
Hose Elbow

144896019
95-1468: RNCC: 3 | RNVC: 9

6 Aug 1997

4730-14-458-5984
Hose Clamp

144585984
PE27021-3244: RNCC: 3 | RNVC: 2

28 Oct 1992

4730-14-040-1354
Tube Cap

140401354
330A55-0475-21: RNCC: 3 | RNVC: 2
330A55-0475-2100: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-506-7253
Hose Clamp

145067253
TORRO110-130/12C7W4: RNCC: 3 | RNVC: 2
TORRO110-130-12-74: RNCC: 5 | RNVC: 2
TORRO110-130-13-74: RNCC: 5 | RNVC: 2
CAE01069: RNCC: 5 | RNVC: 2

13 May 1998

4730-14-324-0993
Tube Coupling Nut

143240993
466-9M8P171A: RNCC: 3 | RNVC: 2
466-9M8P171A: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-041-9182
Hose Mender

140419182
ECEMAT7620: RNCC: 3 | RNVC: 2

1 Jun 1976

4730-14-515-0293
Hose Coupling

145150293
RFE 6-1/4: RNCC: 3 | RNVC: 2
270250030: RNCC: 5 | RNVC: 2

30 Jun 1999

4730-14-405-1578
Tube Outlet

144051578
1 16 06072 EN: RNCC: 3 | RNVC: 2

27 Nov 1985

4730-14-373-6999
Pipe Repair Clamp

143736999
1060744002: RNCC: 3 | RNVC: 2
106-74-40-02: RNCC: 5 | RNVC: 2
106-74-40-02: RNCC: 5 | RNVC: 2
1060744002: RNCC: 5 | RNVC: 2
85-691-6075: RNCC: 6 | RNVC: 9

13 Nov 1981

4730-14-541-6350
Tube Outlet

145416350
C19SF0012-001: RNCC: 3 | RNVC: 2
C19SF0012-001: RNCC: 5 | RNVC: 2

15 Jun 2004

4730-14-209-4000
Tube Elbow

142094000
EN10242-A4-1/8-FE-A: RNCC: 2 | RNVC: 2
770092101: RNCC: 3 | RNVC: 2
770 092 101: RNCC: 5 | RNVC: 2
92 1-8: RNCC: 5 | RNVC: 2
E29801A4A: RNCC: 5 | RNVC: 9
130 1-8: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-040-0224
Union Nut

140400224
0999117930: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-273-8228
Tube Nipple

142738228
DM96: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-421-3955
Hose Clamp

144213955
260311408: RNCC: 3 | RNVC: 2
8AX100D114: RNCC: 5 | RNVC: 2
NSA5535-100: RNCC: 5 | RNVC: 2
NSA5535-100: RNCC: 5 | RNVC: 2

14 Jan 1988

4730-14-290-9513
Tube Nipple

142909513
000MA1050F4REP17: RNCC: 3 | RNVC: 2
000MA022F32PM14DREP1-3A6: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-411-7167
Tube Nipple

144117167
NO PRIMARY REF14-411-7167: RNCC: 3 | RNVC: 2
50060051: RNCC: 5 | RNVC: 9

27 Aug 1986

4730-14-408-4420
Hose To Boss Elbow

144084420
LS08-015-03: RNCC: 3 | RNVC: 2

27 Mar 1986

4730-14-403-0464
Tube To Hose Elbow

144030464
29739161: RNCC: 3 | RNVC: 2
29739161: RNCC: 5 | RNVC: 9

25 Jul 1985

4730-14-327-5669
Tube Elbow

143275669
190730: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-423-9373
Boss Outlet

144239373
213416: RNCC: 3 | RNVC: 2

5 May 1988

4730-14-426-4506
Tube Reducer

144264506
4730HGRED114,3X3,6X88,9X3,2: RNCC: 2 | RNVC: 2

1 Sep 1988

4730-14-497-9756
Hose Elbow

144979756
E29801JC40P40ANH: RNCC: 2 | RNVC: 2

29 Oct 1997

4730-14-244-5395
Tube Nipple

142445395
530 3-8L60: RNCC: 3 | RNVC: 2
FTAA57P03: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-452-7514
Tube Reducer

144527514
148211/78: RNCC: 3 | RNVC: 2
91720512: RNCC: 5 | RNVC: 2
LV018-CS1510L: RNCC: 5 | RNVC: 9
01-352-9630: RNCC: 6 | RNVC: 9

15 Jan 1992

4730-14-389-3101
Tube Elbow

143893101
72-901-54: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-295-2007
Tube Elbow

142952007
G1509-21-15-21NNNU: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-337-4642
Blind Pipe Flange

143374642
A0174-089F6: RNCC: 3 | RNVC: 2

7 Oct 1976

4730-14-507-9590
Packing Nut

145079590
95719: RNCC: 3 | RNVC: 2
19204084: RNCC: 5 | RNVC: 9
5531119: RNCC: 5 | RNVC: 9
LG95719: RNCC: 5 | RNVC: 9

26 Aug 1998

4730-14-231-3633
Tube Cross

142313633
GSM1297FE4-18TABLEAU2: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-214-9426
Slip Joint Nut

142149426
1-3601S16A: RNCC: 3 | RNVC: 2
3605-161: RNCC: 5 | RNVC: 2
1-3601S16A: RNCC: 5 | RNVC: 9
3605-161: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-393-6120
Sediment Strainer

143936120
NO PRIMARY REF14-393-6120: RNCC: 3 | RNVC: 2
503PN10DN40NFE29201: RNCC: 5 | RNVC: 9

7 Jun 1984

4730-14-450-6033
Tube Nipple

144506033
217547: RNCC: 3 | RNVC: 2
91538785: RNCC: 5 | RNVC: 2
91538785: RNCC: 5 | RNVC: 2

15 Oct 1991

4730-14-254-7819
Pipe Swivel Joint

142547819
HPSSTYLE50 3-4GAZ: RNCC: 3 | RNVC: 2
HPS50 3-4: RNCC: 5 | RNVC: 9
EUEHPSSTYLE50 3-4GAZ: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-450-3952
Hose Reducer

144503952
LN324-048F16: RNCC: 3 | RNVC: 2
LN326048APST9: RNCC: 5 | RNVC: 2
TE26,9-10,2-26,9: RNCC: 5 | RNVC: 2
TE26-9 10-2 26-9: RNCC: 5 | RNVC: 2

2 Oct 1991

4730-14-268-5048
Tube Elbow

142685048
A49182B60-3ASJ: RNCC: 2 | RNVC: 2
3D90-60-3MM: RNCC: 3 | RNVC: 2
3D90-60-3MM: RNCC: 3 | RNVC: 2
E29-044-60-3MM90: RNCC: 5 | RNVC: 2
3D90-60-3MM: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-236-6345
Tube Reducer

142366345
831-63-615: RNCC: 3 | RNVC: 2
831-63-615: RNCC: 5 | RNVC: 2
831-63-615: RNCC: 5 | RNVC: 2
831-63-615: RNCC: 5 | RNVC: 2
831-63-615: RNCC: 5 | RNVC: 9
831-63-615: RNCC: 5 | RNVC: 9
831-63-615: RNCC: 5 | RNVC: 9
831-63-615: RNCC: 5 | RNVC: 9
83163-615: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-520-8413
Pipe Coupling

145208413
ISC081103: RNCC: 3 | RNVC: 2

14 Jun 2000

4730-14-326-1533
Tube Elbow

143261533
AD3-57718: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-476-9841
Hose Clamp

144769841
FX13M032-052HN: RNCC: 3 | RNVC: 2
FLEXMH032052: RNCC: 5 | RNVC: 2
SERFX13M032-052HN: RNCC: 5 | RNVC: 9

12 Jul 1995

4730-14-383-2254
Tube Nipple

143832254
M11-10BDIAM36MMAVECECROUS: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-249-6985
Tube Reducer

142496985
631X4139: RNCC: 3 | RNVC: 2
UR3-48-631X4139: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-461-3262
Tube Cap

144613262
BK15A40031A: RNCC: 3 | RNVC: 2

8 Mar 1993

4730-14-452-7521
Tube Nipple

144527521
184251: RNCC: 3 | RNVC: 2
91720521: RNCC: 5 | RNVC: 2
LV116-CS2212L: RNCC: 5 | RNVC: 9
01-352-9639: RNCC: 6 | RNVC: 9

15 Jan 1992

4730-14-474-4899
Special Nipple

144744899
020-5013: RNCC: 3 | RNVC: 2
MANCHETTE M015K1TS/EPDM/DN300: RNCC: 5 | RNVC: 2

17 Feb 1995

4730-14-474-2205
Air Line Manifold

144742205
312-11353-001: RNCC: 3 | RNVC: 2

1 Feb 1995

4730-14-443-7454
Pipe Swivel Joint

144437454
20305992: RNCC: 3 | RNVC: 2

5 Dec 1990

4730-14-372-6528
Tube Elbow

143726528
P4-14-6NU: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-220-6709
Packing Nut

142206709
NO PRIMARY REF14-220-6709: RNCC: 3 | RNVC: 2
RF325: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-393-3147
Tube Elbow

143933147
4730GC180-57: RNCC: 2 | RNVC: 2
BN324-568F5-57-180DEG: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-553-5642
Tube Reducer

145535642
8-4TRMTXS: RNCC: 3 | RNVC: 2

17 Apr 2007

4730-14-305-0129
Tube Coupling Nut

143050129
U1113F17-10-2: RNCC: 2 | RNVC: 2
4730AD-ECROU10,2: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-270-4110
Tube Nipple

142704110
106-20: RNCC: 3 | RNVC: 2
UA20CL5N: RNCC: 3 | RNVC: 2
3A20CL: RNCC: 3 | RNVC: 2
121195: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-442-7000
Tube Reducer

144427000
91510894: RNCC: 1 | RNVC: 2
243CU20-16: RNCC: 3 | RNVC: 2

24 Oct 1990

4730-14-513-1047
Tube To Boss Elbow

145131047
N5277780: RNCC: 3 | RNVC: 2

3 Mar 1999

4730-14-507-6179
Packing Nut

145076179
00330508: RNCC: 3 | RNVC: 2

30 Jul 1998

4730-14-399-1409
Pipe True Wye

143991409
620439: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-355-5277
Slip Joint Nut

143555277
1-3601SB16A: RNCC: 3 | RNVC: 2
1-3601SB16A: RNCC: 5 | RNVC: 9

19 Mar 1979

4730-14-423-2003
Tube To Boss Elbow

144232003
C0RA18X22-150N: RNCC: 3 | RNVC: 2
LV230CP1822N: RNCC: 5 | RNVC: 2
460-404: RNCC: 5 | RNVC: 2
85-693-8844: RNCC: 6 | RNVC: 9

9 Apr 1988

4730-14-387-8493
Tube Reducer

143878493
NO PRIMARY REF14-387-8493: RNCC: 3 | RNVC: 2
0026-118DN25-20: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-360-1346
Packing Nut

143601346
201-418-083REP32: RNCC: 3 | RNVC: 2
201-418-075REP32: RNCC: 5 | RNVC: 2

31 Oct 1979

4730-14-426-4132
Tube Elbow

144264132
4730HJCOUR453D048,3X2,6: RNCC: 2 | RNVC: 2

30 Aug 1988

4730-14-385-7430
Tube Outlet

143857430
338294: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-041-3795
Tube Reducer

140413795
REXM1M3-4: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-443-3745
Hose Reducer

144433745
1/2X1/4PTR34B: RNCC: 3 | RNVC: 2
1/2X1/4PTR34B: RNCC: 3 | RNVC: 9

20 Nov 1990

4730-14-489-8259
Pipe To Boss Elbow

144898259
E4700012: RNCC: 3 | RNVC: 9

22 Aug 1997

4730-14-438-9889
Suction Strainer

144389889
8-80-10: RNCC: 3 | RNVC: 9

11 Apr 1990

4730-14-521-3195
Hose Tee

145213195
330A55-1214-00: RNCC: 3 | RNVC: 2

19 Jul 2000

4730-14-405-0724
Hose Clamp

144050724
NO PRIMARY REF14-405-0724: RNCC: 3 | RNVC: 2
BA40C0DD: RNCC: 5 | RNVC: 9

20 Nov 1985

4730-14-457-7182
Hose Cap

144577182
MG10-13U: RNCC: 3 | RNVC: 2

17 Sep 1992

4730-14-514-9053
Hose Nipple

145149053
121171NU: RNCC: 3 | RNVC: 2

23 Jun 1999

4730-14-535-9620
Tube Nipple

145359620
S3626RQ: RNCC: 3 | RNVC: 2

2 Jul 2003

4730-14-545-4158
Tube Reducer

145454158
CRS3/4X3/8EDZB: RNCC: 3 | RNVC: 2

12 Apr 2005

4730-14-334-0175
Tube Elbow

143340175
7CA14: RNCC: 3 | RNVC: 2
LCA14: RNCC: 3 | RNVC: 2
Q1-54-14: RNCC: 3 | RNVC: 2
CK14N: RNCC: 3 | RNVC: 2

23 Apr 1976

4730-14-328-5850
Tube Cap

143285850
321A08-0347-20: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-473-6518
Blind Pipe Flange

144736518
332A32-3248-20: RNCC: 3 | RNVC: 2

4 Jan 1995

4730-14-384-4650
Tube Coupling Nut

143844650
053.471.000: RNCC: 3 | RNVC: 2
53-471-000: RNCC: 5 | RNVC: 9

4 May 1983

4730-14-301-8189
Tube Nipple

143018189
Q2-11-10NU: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-385-1468
Union Nut

143851468
208-00111-00: RNCC: 3 | RNVC: 2
3556-00: RNCC: 5 | RNVC: 2

26 Jul 1983

4730-14-344-3086
Tube Elbow

143443086
7D18-33-78: RNCC: 3 | RNVC: 2

10 Aug 1977

4730-14-213-7489
Hose Plug

142137489
NO PRIMARY REF14-213-7489: RNCC: 3 | RNVC: 2
3831REP3: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-340-6986
Tube Outlet

143406986
321A82-0313-20: RNCC: 3 | RNVC: 2
85-686-7719: RNCC: 6 | RNVC: 9

14 Feb 1977

4730-14-419-2409
Hose Coupling

144192409
S13FGT1-2: RNCC: 3 | RNVC: 2

16 Oct 1987

4730-14-311-9969
Tube Elbow

143119969
45-10 1-4BGS: RNCC: 3 | RNVC: 2
45-10 1-4BGSNU: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-347-9637
Packing Nut

143479637
4H009053-00: RNCC: 3 | RNVC: 2
4H009053-00: RNCC: 5 | RNVC: 9

29 Mar 1978

4730-14-266-4709
Tube Cap

142664709
NO PRIMARY REF14-266-4709: RNCC: 3 | RNVC: 2
E137D154: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-257-1227
Tube Elbow

142571227
330A52-9809-20: RNCC: 3 | RNVC: 2
330A52-9809-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-314-3051
Packing Nut

143143051
NO PRIMARY REF14-314-3051: RNCC: 3 | RNVC: 2
270516206: RNCC: 5 | RNVC: 2
U07291-64: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-397-4474
Tube To Boss Tee

143974474
1809-30-33X200NU: RNCC: 3 | RNVC: 2
TORSA30X33-200NNU: RNCC: 3 | RNVC: 2
105A30-33X200NU: RNCC: 3 | RNVC: 2
121057NU: RNCC: 3 | RNVC: 2
1809-30-33X200NNNU: RNCC: 5 | RNVC: 2

14 Dec 1984

4730-14-383-2274
Tube Nipple

143832274
MAM153-153/IA: RNCC: 3 | RNVC: 2
MAM153-153IA: RNCC: 5 | RNVC: 2

17 Mar 1983

4730-14-342-6084
Tube Cap

143426084
1612SMS060: RNCC: 3 | RNVC: 2

16 May 1977

4730-14-353-0863
Packing Nut

143530863
A1081: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-556-0012
Tube Cap

145560012
14100020161: RNCC: 3 | RNVC: 2

21 Jan 2008

4730-14-469-3085
Tube Reducer

144693085
NSNGR10003: RNCC: 3 | RNVC: 2

19 Apr 1994

4730-14-268-6310
Tube Elbow

142686310
14-12: RNCC: 3 | RNVC: 2
CA12N: RNCC: 3 | RNVC: 2
7A12: RNCC: 3 | RNVC: 2
L12: RNCC: 3 | RNVC: 2
121113: RNCC: 5 | RNVC: 2
062076680: RNCC: 5 | RNVC: 9
76680: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-430-3833
Hose Cap

144303833
0177-01-04-18: RNCC: 3 | RNVC: 2

15 Mar 1989

4730-14-513-6448
Tube Nipple

145136448
P65412559: RNCC: 3 | RNVC: 2
ASNA0198A06: RNCC: 5 | RNVC: 2
ASNA0198A06: RNCC: 5 | RNVC: 2
353-140-12559E: RNCC: 5 | RNVC: 2
RV65061DEA: RNCC: 5 | RNVC: 2

1 Apr 1999

4730-14-315-2705
Tube Outlet

143152705
00373-54: RNCC: 3 | RNVC: 2
C00373-54: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-348-1385
Tube Cap

143481385
60BRT264-12: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-449-9295
Tube Reducer

144499295
D-530-38: RNCC: 3 | RNVC: 2

16 Sep 1991

4730-14-447-1009
Tube Reducer

144471009
MAT821-3000F2: RNCC: 3 | RNVC: 2

2 May 1991

4730-14-458-0664
Tube Reducer

144580664
TRTXS20-12: RNCC: 3 | RNVC: 2

6 Oct 1992

4730-14-347-8612
Tube Coupling Nut

143478612
9933001600: RNCC: 3 | RNVC: 2
650-794-061-0: RNCC: 5 | RNVC: 2

1 Mar 1978

4730-14-514-2742
Hose Clamp

145142742
3845-008: RNCC: 3 | RNVC: 2

5 May 1999

4730-14-257-2118
Tube Cap

142572118
330A75-3148-20: RNCC: 3 | RNVC: 2
330A75-3148-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-338-7413
Packing Nut

143387413
F00487-19: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-335-8525
Tube Elbow

143358525
01021600: RNCC: 3 | RNVC: 2
1021600: RNCC: 5 | RNVC: 2

24 Jul 1976

4730-14-362-1228
Tube Outlet

143621228
AURL45-14: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-326-9946
Tube Elbow

143269946
AQ8BF16KD: RNCC: 3 | RNVC: 2
501-729-584-0: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-395-8791
Tube Coupling Nut

143958791
4730AMF4PN100DE20: RNCC: 2 | RNVC: 2
GSM164-057F9Z0NEA: RNCC: 3 | RNVC: 2
MAT164-0354F9ZONEA: RNCC: 3 | RNVC: 2

30 Oct 1984

4730-14-543-9296
Hose Clamp

145439296
SCO1155-241103: RNCC: 3 | RNVC: 2

16 Dec 2004

4730-14-368-4204
Tube Nipple

143684204
262-50-55860-26: RNCC: 3 | RNVC: 2

20 Feb 1981

4730-14-353-1153
Hose Clamp

143531153
RC55-121: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-335-7611
Tube Elbow

143357611
160-64100-64: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-409-0838
Tube Elbow

144090838
1EDR25X16: RNCC: 3 | RNVC: 2
CRA25-16: RNCC: 3 | RNVC: 2
7RA25-16: RNCC: 3 | RNVC: 2

16 Apr 1986

4730-14-218-3106
Tube Coupling Nut

142183106
400530: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-387-3306
Fluid Filter

143873306
HH9681BRXUTUWP: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-362-5194
Tube Elbow

143625194
EN10242-A4-3/8X1/4-ZN-A: RNCC: 2 | RNVC: 2
770092215: RNCC: 3 | RNVC: 2
770 092 215: RNCC: 5 | RNVC: 2
92 3-8X1-4Z: RNCC: 5 | RNVC: 2
E29801A4CBZ: RNCC: 5 | RNVC: 9
2900051: RNCC: 5 | RNVC: 9

19 Mar 1980

4730-14-231-5742
Tube Elbow

142315742
EN10242-G8-1 1/2-FE-A: RNCC: 2 | RNVC: 2
770003108: RNCC: 3 | RNVC: 2
770 003 108: RNCC: 5 | RNVC: 2
3036019R1: RNCC: 5 | RNVC: 2
SYQ3053: RNCC: 5 | RNVC: 2
3-1 1-2: RNCC: 5 | RNVC: 2
E29801G8H: RNCC: 5 | RNVC: 9
138-1 1-2: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-377-1215
Tube Reducer

143771215
NO PRIMARY REF14-377-1215: RNCC: 3 | RNVC: 2
4900866: RNCC: 5 | RNVC: 2
GE25SREDK0R25-16S: RNCC: 5 | RNVC: 2
GE25SREDK0R25-16S: RNCC: 5 | RNVC: 9

17 May 1982

4730-14-220-6610
Tube Nipple

142206610
Q1-506-10CL12: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-543-6115
Air Line Manifold

145436115
704A42-7280-20: RNCC: 1 | RNVC: 2
120100: RNCC: 3 | RNVC: 2

25 Nov 2004

4730-14-494-9605
Union Nut

144949605
NO PRIMARY REF14-494-9605: RNCC: 3 | RNVC: 2
5450739: RNCC: 5 | RNVC: 2
F300 0T 018 1170: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-228-6869
Tube Cross

142286869
GSM1297FD4-1TABLEAU1D1-14: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-462-2039
Union Nut

144622039
MAT137-01-02: RNCC: 3 | RNVC: 2

15 Apr 1993

4730-14-252-3081
Tube Reducer

142523081
NO PRIMARY REF14-252-3081: RNCC: 3 | RNVC: 2
320725: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-297-4821
Pipe Swivel Joint

142974821
H3710F: RNCC: 3 | RNVC: 2
H3710F: RNCC: 5 | RNVC: 9
EUEH3710F: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-378-6581
Tube Coupling Nut

143786581
4730AJ4.5DN10: RNCC: 2 | RNVC: 2
LL002-NK10S: RNCC: 3 | RNVC: 2
MEC10831: RNCC: 3 | RNVC: 2
8510100066: RNCC: 5 | RNVC: 2

11 Aug 1982

4730-14-385-7064
Tube Elbow

143857064
CT8: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-386-1904
Blind Pipe Flange

143861904
CPA135100: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-513-3439
Hose Mender

145133439
3K05-198: RNCC: 3 | RNVC: 2

16 Mar 1999

4730-14-444-9705
Hose Nipple

144449705
355A54-3042-20: RNCC: 3 | RNVC: 2

30 Jan 1991

4730-14-421-5558
Pipe Swivel Joint

144215558
1234SRK: RNCC: 3 | RNVC: 2

19 Jan 1988

4730-14-290-8810
Tube Coupling Nut

142908810
1-1088ZW00-04: RNCC: 3 | RNVC: 9
1-1088ZW00-04: RNCC: 5 | RNVC: 9
1-1136ZW00-04: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-392-3679
Tube Reducer

143923679
735-910-364: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-395-7116
Tube Elbow

143957116
7N3-08LA: RNCC: 3 | RNVC: 2
9560136930: RNCC: 5 | RNVC: 2

30 Oct 1984

4730-14-452-3031
Tube Cap

144523031
ST104M32-12P14C: RNCC: 3 | RNVC: 2

8 Jan 1992

4730-14-520-0777
Tube Elbow

145200777
C19SF0010-066: RNCC: 3 | RNVC: 2
C19SF0010-066: RNCC: 5 | RNVC: 2

10 May 2000

4730-14-440-5456
Tube To Boss Elbow

144405456
CORPB6-10: RNCC: 3 | RNVC: 2
CORPB6-10: RNCC: 3 | RNVC: 9
C0RBPB6-10: RNCC: 5 | RNVC: 9

17 Jul 1990

4730-14-516-5203
Tube Elbow

145165203
A041416 08 06: RNCC: 3 | RNVC: 2
2823-08-06: RNCC: 5 | RNVC: 2
2823-8-6: RNCC: 5 | RNVC: 2

29 Sep 1999

4730-14-235-1315
Tube Cap

142351315
NO PRIMARY REF14-235-1315: RNCC: 3 | RNVC: 2
500520: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-297-4818
Pipe Swivel Joint

142974818
H110F: RNCC: 3 | RNVC: 2
H110F: RNCC: 5 | RNVC: 9
EUEH110F: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-347-4067
Tube Elbow

143474067
75A25-26-34CYL: RNCC: 3 | RNVC: 2

1 Mar 1978

4730-14-476-9828
Hose Clamp

144769828
FX08M018-028-F: RNCC: 3 | RNVC: 2
MIN0XR018028: RNCC: 5 | RNVC: 2
FX08M018-028-F: RNCC: 5 | RNVC: 2
SERFX08M018-028-F: RNCC: 5 | RNVC: 9

12 Jul 1995

4730-14-363-4802
Tube Elbow

143634802
NO PRIMARY REF14-363-4802: RNCC: 3 | RNVC: 2
XEVW35LR: RNCC: 5 | RNVC: 2
XEVW35LR: RNCC: 5 | RNVC: 9

9 May 1980

4730-14-210-9914
Tube Cap

142109914
BM25: RNCC: 3 | RNVC: 2
25RM8C: RNCC: 3 | RNVC: 2
0BA25N: RNCC: 3 | RNVC: 2
104JCU25: RNCC: 3 | RNVC: 2
15A25: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-521-6162
Fluid Orifice Plate

145216162
3M720066: RNCC: 3 | RNVC: 2

29 Aug 2000

4730-14-392-9149
Tube Nipple

143929149
0000251720: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-310-8430
Tube Coupling Nut

143108430
70834: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-514-1010
Union Tailpiece

145141010
NV/4AG33/26X34CYL-NU: RNCC: 3 | RNVC: 2
4310-65-0000077: RNCC: 6 | RNVC: 9

26 Apr 1999

4730-14-366-0165
Packing Nut

143660165
NO PRIMARY REF14-366-0165: RNCC: 3 | RNVC: 2
F91BC7312-018: RNCC: 5 | RNVC: 9

4 Nov 1980

4730-14-420-0487
Tube To Boss Elbow

144200487
4B11330: RNCC: 3 | RNVC: 2
0000706944: RNCC: 5 | RNVC: 2
C8XS18-20M18X1-5: RNCC: 5 | RNVC: 2

18 Nov 1987

4730-14-504-4618
Boss Coupling

145044618
DG012FO/U1570: RNCC: 3 | RNVC: 9
55907/57162/4 ITEM 71: RNCC: 5 | RNVC: 2
DG012FO: RNCC: 5 | RNVC: 2

18 Feb 1998

4730-14-442-5019
Tube Reducer

144425019
01682117: RNCC: 3 | RNVC: 2
1682117: RNCC: 5 | RNVC: 2
91364868: RNCC: 5 | RNVC: 2
252-0411: RNCC: 5 | RNVC: 2

17 Oct 1990

4730-14-413-8513
Tube Elbow

144138513
4730HJCOUR903D033,7X2,3: RNCC: 2 | RNVC: 2
3D90-33,7X2,3Z2CND17-12T3A49282: RNCC: 5 | RNVC: 2

21 Jan 1987

4730-14-228-6865
Tube Cross

142286865
GSM1297FD4-1TABLEAU2D1-25: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-254-7914
Tube Elbow

142547914
G15-27 3-4BGS: RNCC: 3 | RNVC: 2
CMAG27X3-4BGSN: RNCC: 3 | RNVC: 2
8AG27 3-4BGS: RNCC: 3 | RNVC: 2
LMG27-12B: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-504-0219
Hose Nipple

145040219
12118: RNCC: 3 | RNVC: 2

4 Feb 1998

4730-14-524-0535
Hose Cap

145240535
0090430790: RNCC: 3 | RNVC: 2

22 Feb 2001

4730-14-401-3224
Air Line Manifold

144013224
02K5545050: RNCC: 3 | RNVC: 2

5 Jun 1985

4730-14-405-3012
Boss Coupling

144053012
082006-04700: RNCC: 3 | RNVC: 2

27 Nov 1985

4730-14-246-0964
Tube Elbow

142460964
EN10242-UA11-1 1/4-FE-A: RNCC: 2 | RNVC: 2
770096107: RNCC: 3 | RNVC: 2
770 096 107: RNCC: 5 | RNVC: 2
96-1 1-4: RNCC: 5 | RNVC: 2
2402330: RNCC: 5 | RNVC: 9
338-1 1-4: RNCC: 5 | RNVC: 9
E29801V5G: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-391-7631
Tube Elbow

143917631
365A75-2378-02: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-481-2685
Hose Clamp

144812685
FX08M060-080HE: RNCC: 3 | RNVC: 2
SERFX08M060-080HE: RNCC: 5 | RNVC: 9

25 Apr 1996

4730-14-410-7294
Tube Coupling Nut

144107294
581-312-018-0: RNCC: 3 | RNVC: 2

9 Jul 1986

4730-14-413-6669
Tube Elbow

144136669
4730HJCOUR905D026,9X2,9: RNCC: 2 | RNVC: 2
5D90-26,9X2,9Z2CND17-12T3U1238: RNCC: 5 | RNVC: 2

13 Jan 1987

4730-14-426-4514
Tube Reducer

144264514
4730HGRED273X6,3X219,1X5,6: RNCC: 2 | RNVC: 2

1 Sep 1988

4730-14-246-0212
Tube Cross

142460212
R10X10SX10X12: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-229-8009
Packing Nut

142298009
A73320: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-287-5105
Tube Elbow

142875105
EN10242-D1-3/8-ZN-A: RNCC: 2 | RNVC: 2
770012203: RNCC: 3 | RNVC: 2
2A3-8Z: RNCC: 5 | RNVC: 2
770 012 203: RNCC: 5 | RNVC: 2
E29801D1CZ: RNCC: 5 | RNVC: 9
136A3-8Z: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-331-6042
Tube Elbow

143316042
CMCA20X15-21N: RNCC: 3 | RNVC: 2
0946600014: RNCC: 5 | RNVC: 2
946600014: RNCC: 5 | RNVC: 9
0946600014: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-387-1224
Tube Elbow

143871224
CMA8X1-4BGSN: RNCC: 3 | RNVC: 2
99-622-08-127-2: RNCC: 5 | RNVC: 2
99622081272: RNCC: 5 | RNVC: 2

24 Aug 1983

4730-14-413-6630
Tube Elbow

144136630
4730HJCOUR905D076,1X2,9: RNCC: 2 | RNVC: 2
5D90-76,1X2,9Z2CND17-12T3U1238: RNCC: 5 | RNVC: 2

13 Jan 1987

4730-14-427-8932
Tube Elbow

144278932
W16S71: RNCC: 3 | RNVC: 2
W16S71: RNCC: 3 | RNVC: 9
XW16-PS/1.4571: RNCC: 5 | RNVC: 9

19 Nov 1988

4730-14-457-5690
Tube Elbow

144575690
45-12 1-4BGS: RNCC: 3 | RNVC: 2

10 Sep 1992

4730-14-243-7375
Fluid Orifice Plate

142437375
552-431MA024DET4-7-9BIS13BISAU15: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-444-3409
Tube Elbow

144443409
12-10C2OMXS: RNCC: 3 | RNVC: 2
12-10C2OMXS: RNCC: 3 | RNVC: 9
C50XS20-7/8: RNCC: 5 | RNVC: 9

8 Jan 1991

4730-14-326-1538
Tube Elbow

143261538
AD3-57873: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-372-0786
Tube Elbow

143720786
CTXS18 3-4: RNCC: 3 | RNVC: 2
J10370-32: RNCC: 5 | RNVC: 2
J10370-32: RNCC: 5 | RNVC: 2

1 Sep 1981

4730-14-379-7431
Tube Elbow

143797431
9607-2 1-2: RNCC: 3 | RNVC: 2
7205: RNCC: 5 | RNVC: 2
9607-2: RNCC: 5 | RNVC: 9

20 Oct 1982

4730-14-469-3274
Tube Cross

144693274
BN329512CROIXRED33,7-26,9-2,77: RNCC: 3 | RNVC: 2

20 Apr 1994

4730-14-407-6946
Tube Elbow

144076946
NO PRIMARY REF14-407-6946: RNCC: 3 | RNVC: 2
0329-1302-305-1-2-82: RNCC: 5 | RNVC: 9

27 Feb 1986

4730-14-370-6553
Tube Elbow

143706553
9952335: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-341-6691
Tube Elbow

143416691
8L6-8-13C0: RNCC: 3 | RNVC: 2
55-6-8-13C0: RNCC: 3 | RNVC: 2
CMCL6X8-13N: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-449-3946
Tube Elbow

144493946
MY20721-422-11: RNCC: 3 | RNVC: 2

7 Aug 1991

4730-14-287-5108
Tube Elbow

142875108
EN10242-D1-1 1/4-ZN-A: RNCC: 2 | RNVC: 2
770012207: RNCC: 3 | RNVC: 2
2A1 1-4Z: RNCC: 5 | RNVC: 2
770 012 207: RNCC: 5 | RNVC: 2
E29801D1GZ: RNCC: 5 | RNVC: 9
136A1 1-4Z: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-268-8900
Tube Elbow

142688900
631X5117: RNCC: 3 | RNVC: 2
ER2-86-631X5117: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-361-5172
Tube Elbow

143615172
GSM164-037F8: RNCC: 3 | RNVC: 2
MAT164-0363F8: RNCC: 3 | RNVC: 2

24 Jan 1980

4730-14-337-1740
Tube Elbow

143371740
300175-150DEGRES: RNCC: 3 | RNVC: 9

7 Oct 1976

4730-14-365-8194
Tube Elbow

143658194
303-117-001-0: RNCC: 3 | RNVC: 2

8 Oct 1980

4730-14-271-8780
Blind Pipe Flange

142718780
RUAN7521-30: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-257-2161
Tube Elbow

142572161
330A75-5108-20: RNCC: 3 | RNVC: 2
330A75-5108-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-334-2666
Blind Pipe Flange

143342666
GSM162-013F6: RNCC: 3 | RNVC: 2
A0143-013F5: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-502-3457
Blind Pipe Flange

145023457
650-977-202-0: RNCC: 3 | RNVC: 2

9 Dec 1997

4730-14-305-6237
Tube Elbow

143056237
9102340047: RNCC: 3 | RNVC: 2
I6-34: RNCC: 5 | RNVC: 9
I6-34HP: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-429-5379
Tube Elbow

144295379
A49186B44APMGPD: RNCC: 2 | RNVC: 2

30 Jan 1989

4730-14-405-9041
Hose Coupling

144059041
3087441: RNCC: 3 | RNVC: 2

12 Dec 1985

4730-14-408-4452
Tube Elbow

144084452
LV200-NS08S: RNCC: 3 | RNVC: 2
89020800NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-342-4102
Tube Elbow

143424102
14-12-14FL3-8: RNCC: 3 | RNVC: 2
0024255104: RNCC: 5 | RNVC: 2
24255104: RNCC: 5 | RNVC: 9

16 May 1977

4730-14-413-8510
Tube Elbow

144138510
4730HJCOUR903D060,3X5,6: RNCC: 2 | RNVC: 2
3D90-60,3X5,6Z2CND17-12T3A49282: RNCC: 5 | RNVC: 2

21 Jan 1987

4730-14-309-3968
Water Well Strainer

143093968
536-410-025: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-537-7492
Fluid Orifice Plate

145377492
20-7-E-30CA-3344-017-001: RNCC: 3 | RNVC: 2

19 Nov 2003

4730-14-395-3202
Blind Pipe Flange

143953202
GSM425-034F16: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-340-1194
Tube Elbow

143401194
9109101366: RNCC: 3 | RNVC: 2
CA10-10-8-13C0: RNCC: 5 | RNVC: 9
CA10-10-8X13BSPC0: RNCC: 5 | RNVC: 9

18 Jan 1977

4730-14-515-3380
Hose Elbow

145153380
3535820100: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-300-6435
Tube Coupling Nut

143006435
79495DET34: RNCC: 3 | RNVC: 2
83965DET34: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-440-7723
Flange Elbow

144407723
MAT543-0001F2: RNCC: 3 | RNVC: 2

25 Jul 1990

4730-14-453-4836
Tube Reducer

144534836
4730HJRED021,3X3,6-17,2X2,3: RNCC: 2 | RNVC: 2

21 Feb 1992

4730-14-531-1775
Tube Nipple

145311775
3606-08-00: RNCC: 3 | RNVC: 2

30 Jul 2002

4730-14-405-0496
Adapter Bushing

144050496
M2FDIAM32: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-456-6542
Tube Reducer

144566542
RK10X6N: RNCC: 3 | RNVC: 2

17 Jul 1992

4730-14-424-6460
Tube To Hose Elbow

144246460
3005641-00: RNCC: 3 | RNVC: 2
3005641: RNCC: 5 | RNVC: 2

2 Jun 1988

4730-14-382-9217
Tube Nipple

143829217
50207862: RNCC: 3 | RNVC: 2
717327: RNCC: 5 | RNVC: 2
5171732700: RNCC: 5 | RNVC: 2
50207862: RNCC: 5 | RNVC: 9
63-3N20: RNCC: 5 | RNVC: 9
91758399: RNCC: 5 | RNVC: 9
5020: RNCC: 5 | RNVC: 9

17 Mar 1983

4730-14-031-0644
Tube Nipple

140310644
9106100051: RNCC: 3 | RNVC: 2
VDP4794: RNCC: 5 | RNVC: 2
9406100058: RNCC: 5 | RNVC: 2
A5-10-51: RNCC: 5 | RNVC: 9

14 Jun 1980

4730-14-391-7138
Slip Joint Nut

143917138
3-2605-01-63A: RNCC: 3 | RNVC: 2
3-2605-01-63A: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-214-9424
Slip Joint Nut

142149424
1-3601S20A: RNCC: 3 | RNVC: 2
3601-201: RNCC: 5 | RNVC: 2
3601-201: RNCC: 5 | RNVC: 9
1-3601S20A: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-513-8390
Tube Reducer

145138390
770 245 117: RNCC: 3 | RNVC: 2
770245117: RNCC: 5 | RNVC: 2

14 Apr 1999

4730-14-339-9954
Sediment Strainer

143399954
401MA0401R1: RNCC: 3 | RNVC: 2
401MA401R1: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-265-9528
Tube Nipple

142659528
DM110: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-481-0828
Hose Clamp

144810828
FX08M150-170-J: RNCC: 3 | RNVC: 2
SERFX08M150-170-J: RNCC: 5 | RNVC: 9

18 Apr 1996

4730-14-370-2593
Hose Clamp

143702593
650-401-100-0: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-392-3934
Union Nut

143923934
GSM823-001F19: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-511-7474
Tube To Boss Elbow

145117474
GSM164-058F15: RNCC: 3 | RNVC: 2

14 Jan 1999

4730-14-402-8976
Boss Outlet

144028976
NO PRIMARY REF14-402-8976: RNCC: 3 | RNVC: 2
1316: RNCC: 5 | RNVC: 9

25 Jul 1985

4730-14-397-9368
Tube Nipple

143979368
106-14CL20NU: RNCC: 3 | RNVC: 2
UA14CL20NNU: RNCC: 3 | RNVC: 2
3A14CL20NU: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-535-3628
Boss Elbow

145353628
2807137033: RNCC: 3 | RNVC: 2
5005130390: RNCC: 5 | RNVC: 2

22 May 2003

4730-14-311-7835
Hose Clamp

143117835
E27852GC048054X: RNCC: 2 | RNVC: 2
DSGINO54: RNCC: 3 | RNVC: 2
DX54: RNCC: 3 | RNVC: 2
DIN54: RNCC: 5 | RNVC: 2
CFX1054: RNCC: 5 | RNVC: 9
SERCFX1054: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-472-1473
Hose Clamp

144721473
722871: RNCC: 3 | RNVC: 2
77704680J: RNCC: 5 | RNVC: 2

10 Oct 1994

4730-14-319-6624
Tube Lateral

143196624
AS34TQ5BREP10: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-246-0483
Tube Reducer

142460483
ADAPTEUR103GAZCY12-14XG3-8: RNCC: 3 | RNVC: 2
ADAPTEUR103GAZCY12-14XG3-8: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-404-4042
Tube Nipple

144044042
NO PRIMARY REF14-404-4042: RNCC: 3 | RNVC: 2
DM280GFC1/2: RNCC: 5 | RNVC: 9

30 Oct 1985

4730-14-489-3445
Air Line Manifold

144893445
304-829-001-0: RNCC: 3 | RNVC: 2

9 Jul 1997

4730-14-372-3886
Tube Nipple

143723886
P4-106-10CL10: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-414-7114
Sediment Strainer

144147114
6772-DN-125: RNCC: 2 | RNVC: 2
M096304A6868WDB: RNCC: 3 | RNVC: 2
M096304A6868WDB: RNCC: 3 | RNVC: 9
E10-0125-0963-68-68: RNCC: 5 | RNVC: 9

26 Feb 1987

4730-14-378-6843
Tube Coupling Nut

143786843
CRP23-17-03: RNCC: 3 | RNVC: 2
85-692-0864: RNCC: 6 | RNVC: 9

11 Aug 1982

4730-14-458-3047
Tube To Hose Tee

144583047
11A 1-4C0-6LNU: RNCC: 3 | RNVC: 2
111110092: RNCC: 5 | RNVC: 2
11A8-13C0-6LNU: RNCC: 5 | RNVC: 2
0024371301: RNCC: 5 | RNVC: 2
5005130203: RNCC: 5 | RNVC: 2

15 Oct 1992

4730-14-399-3708
Tube Cap

143993708
34998-00: RNCC: 3 | RNVC: 2
50087: RNCC: 3 | RNVC: 2
789-61: RNCC: 5 | RNVC: 2
91550727: RNCC: 5 | RNVC: 2

6 Mar 1985

4730-14-317-0044
Hose Clamp

143170044
FX13D430-470-R: RNCC: 3 | RNVC: 2
91684365: RNCC: 5 | RNVC: 2
FLEXIN0XDIAM470: RNCC: 5 | RNVC: 9
FX-13-430-470-V8TH: RNCC: 5 | RNVC: 9
FX-13S-430-470-V8TH: RNCC: 5 | RNVC: 9
FX13D430-470-R: RNCC: 5 | RNVC: 9
SERFX13D430-470-R: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-361-5649
Packing Nut

143615649
26452: RNCC: 3 | RNVC: 2

24 Jan 1980

4730-14-376-4489
Tube Coupling Nut

143764489
R95403A14D: RNCC: 2 | RNVC: 2
99052603: RNCC: 5 | RNVC: 2
R95403A14D: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-236-9708
Hose Clamp

142369708
062066371: RNCC: 3 | RNVC: 9
FD4269: RNCC: 5 | RNVC: 2
66371: RNCC: 5 | RNVC: 9
705065: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-389-8964
Hose Clamp

143898964
18AG300DP300: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-445-1715
Tube Swivel Joint

144451715
440 364: RNCC: 3 | RNVC: 9

4 Feb 1991

4730-14-371-0552
Tube Reducer

143710552
8466203066: RNCC: 3 | RNVC: 2
846620309966: RNCC: 5 | RNVC: 2

5 Jun 1981

4730-14-383-9219
Hose Clamp

143839219
0.12.07: RNCC: 3 | RNVC: 2
0-12-0-7: RNCC: 5 | RNVC: 2
0-12-07: RNCC: 5 | RNVC: 2

11 Apr 1983

4730-14-293-3439
Fueling Manifold

142933439
121E52-136-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-544-5213
Hose Clamp

145445213
TORRO12-22/9-C7W4: RNCC: 3 | RNVC: 2

8 Feb 2005

4730-14-458-2115
Tube Outlet

144582115
MAT580-0005F3: RNCC: 3 | RNVC: 2

13 Oct 1992

4730-14-462-1318
Spool Piece

144621318
LN326-057-06-02DN20: RNCC: 3 | RNVC: 2
RAB0820: RNCC: 5 | RNVC: 2

6 Apr 1993

4730-14-385-0456
Sediment Strainer

143850456
E10-0070-0961-68-68: RNCC: 3 | RNVC: 9
E10-70-961-68-68: RNCC: 5 | RNVC: 9

2 Jun 1983

4730-14-448-9848
Tube Reducer

144489848
XK0R20-16PS: RNCC: 3 | RNVC: 2

24 Jul 1991

4730-14-394-2469
Boss Outlet

143942469
NO PRIMARY REF14-394-2469: RNCC: 3 | RNVC: 2
7367590: RNCC: 5 | RNVC: 9
73-6759-0: RNCC: 5 | RNVC: 9

23 Jun 1984

4730-14-407-0249
Tube Nipple

144070249
MAM151/151/IC: RNCC: 3 | RNVC: 2

29 Jan 1986

4730-14-311-6726
Tube Coupling Nut

143116726
319A80-00-102: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-514-8437
Hose Clamp

145148437
FX13M110-130HM: RNCC: 3 | RNVC: 2
FX13M110-130HM: RNCC: 5 | RNVC: 2
SERFX13M110-130HM: RNCC: 5 | RNVC: 9

22 Jun 1999

4730-14-334-5883
Packing Nut

143345883
82348A: RNCC: 3 | RNVC: 2
650-485-185-0: RNCC: 5 | RNVC: 2

1 Jun 1976

4730-14-426-6660
Tube Cap

144266660
LV003CP12LZJ8: RNCC: 3 | RNVC: 2
91600104: RNCC: 5 | RNVC: 2

15 Sep 1988

4730-14-432-4433
Pipe Bushing

144324433
A2H22869INOX: RNCC: 3 | RNVC: 2

13 Jun 1989

4730-14-449-9074
Tube Outlet

144499074
41-34882: RNCC: 3 | RNVC: 2
41-34882: RNCC: 5 | RNVC: 9

11 Sep 1991

4730-14-230-1214
Hose Clamp

142301214
NO PRIMARY REF14-230-1214: RNCC: 3 | RNVC: 2
40610: RNCC: 5 | RNVC: 9
062075611: RNCC: 5 | RNVC: 9
75611: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-387-8530
Tube Reducer

143878530
NO PRIMARY REF14-387-8530: RNCC: 3 | RNVC: 2
0026-132DN300-200: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-286-8559
Tube Coupling Nut

142868559
330-17A: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-281-1923
Tube Nipple

142811923
NO PRIMARY REF14-281-1923: RNCC: 3 | RNVC: 2
0490-00 3-8: RNCC: 5 | RNVC: 2
D1010-608: RNCC: 5 | RNVC: 2
ARS-BF/1010/608: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-376-5178
Tube Reducer

143765178
NO PRIMARY REF14-376-5178: RNCC: 3 | RNVC: 2
404188233: RNCC: 5 | RNVC: 9
404188233: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-032-2725
Sediment Strainer

140322725
M095704A6868NGF: RNCC: 3 | RNVC: 2
M095704A6868NGF: RNCC: 3 | RNVC: 9
E10-0025-0957-68-68-100MICRONS: RNCC: 5 | RNVC: 9
E10-25-957-68-68-100MICR0NS: RNCC: 5 | RNVC: 9

17 May 1982

4730-14-220-6579
Tube Reducer

142206579
Q1-52-8-12X100: RNCC: 3 | RNVC: 2
UMK8X12-100N: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-283-2369
Tube Coupling Nut

142832369
7267-0043: RNCC: 3 | RNVC: 2
SAF7267-0043: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-481-0821
Hose Clamp

144810821
FX08M110-130-J: RNCC: 3 | RNVC: 2
SERFX08M110-130-J: RNCC: 5 | RNVC: 9

18 Apr 1996

4730-14-505-3662
Tube Nipple

145053662
0106-10-00: RNCC: 3 | RNVC: 2
293-6642: RNCC: 5 | RNVC: 2

18 Mar 1998

4730-14-507-4146
Tube Nipple

145074146
LL100-CS10L: RNCC: 3 | RNVC: 2

6 Jul 1998

4730-14-454-2020
Hose Clamp

144542020
S85-20SK2W5: RNCC: 3 | RNVC: 2

26 Mar 1992

4730-14-459-3684
Hose Elbow

144593684
NO PRIMARY REF14-459-3684: RNCC: 3 | RNVC: 2
50053301777: RNCC: 5 | RNVC: 2
34020600: RNCC: 5 | RNVC: 9

26 Nov 1992

4730-14-533-9197
Hose Elbow

145339197
2703718: RNCC: 3 | RNVC: 2
2703718: RNCC: 5 | RNVC: 2
184.021: RNCC: 5 | RNVC: 9

4 Mar 2003

4730-14-405-8226
Boss Coupling

144058226
3-8FF44B: RNCC: 3 | RNVC: 2
3-8FF44B: RNCC: 3 | RNVC: 2

4 Dec 1985

4730-14-250-0047
Packing Nut

142500047
H90C2017: RNCC: 3 | RNVC: 2
530725: RNCC: 5 | RNVC: 2
H90C2017: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-460-2405
Tube Nipple

144602405
12LU12LNU: RNCC: 3 | RNVC: 2
712151: RNCC: 5 | RNVC: 2

19 Jan 1993

4730-14-415-2596
Boss Outlet

144152596
35510413: RNCC: 3 | RNVC: 2

22 Apr 1987

4730-14-547-0174
Hose Clamp

145470174
78644C040060H: RNCC: 1 | RNVC: 2
FX13 40-60 A8H-W4: RNCC: 3 | RNVC: 2
812079060: RNCC: 3 | RNVC: 2

14 Sep 2005

4730-14-370-6927
Hose Clamp

143706927
DGR45: RNCC: 3 | RNVC: 2
V15369-25: RNCC: 5 | RNVC: 2
V15369-25: RNCC: 5 | RNVC: 2

5 Jun 1981

4730-14-420-4442
Tube Nipple

144204442
106-6CL10NU: RNCC: 3 | RNVC: 2
UA6CL10NNU: RNCC: 3 | RNVC: 2
3A6CL10NU: RNCC: 3 | RNVC: 2
106-6CL10NNNU: RNCC: 5 | RNVC: 2

10 Dec 1987

4730-14-230-1124
Hose Clamp

142301124
260206308: RNCC: 3 | RNVC: 2
8AX70D63: RNCC: 5 | RNVC: 2
2220-8AX70D63: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-411-7201
Tube Nipple

144117201
353-140-3733: RNCC: 3 | RNVC: 2
50326162: RNCC: 5 | RNVC: 2
5172010800: RNCC: 5 | RNVC: 2
50326162: RNCC: 5 | RNVC: 9
720108: RNCC: 5 | RNVC: 9

27 Aug 1986

4730-14-445-8289
Union Thread Piece

144458289
721-510-208: RNCC: 3 | RNVC: 2

27 Feb 1991

4730-14-537-0724
Hose Clamp

145370724
ASNA0032-082: RNCC: 1 | RNVC: 2
ASNA0032-082: RNCC: 3 | RNVC: 2
ASNA0032-082: RNCC: 5 | RNVC: 2
ASNA0032-082: RNCC: 5 | RNVC: 2
55216-062-082: RNCC: 5 | RNVC: 2

24 Sep 2003

4730-14-208-2727
Grease Cup

142082727
2K80000102: RNCC: 3 | RNVC: 2
HG26-22: RNCC: 5 | RNVC: 2
K8000010: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-460-3800
Tube Nipple

144603800
050102212: RNCC: 3 | RNVC: 2
85-694-8726: RNCC: 6 | RNVC: 9

21 Jan 1993

4730-14-295-4326
Packing Nut

142954326
A1-64558: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-392-5820
Tube Nipple

143925820
0000250600: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-435-6919
Hose Saddle

144356919
053760-850-901: RNCC: 3 | RNVC: 9
5003079018: RNCC: 5 | RNVC: 2

20 Nov 1989

4730-14-282-2508
Tube Nipple

142822508
9910550: RNCC: 3 | RNVC: 2
2083-2-2: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-392-3662
Tube Coupling Nut

143923662
GSM164-057F8A: RNCC: 3 | RNVC: 2
MAT164-0354F8ZONEA: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-210-7997
Tube Cap

142107997
NO PRIMARY REF14-210-7997: RNCC: 3 | RNVC: 2
Z11153B: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-240-5822
Tube Reducer

142405822
5DDR14X8: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-295-0993
Tube Reducer

142950993
274090: RNCC: 3 | RNVC: 2
274090: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-461-0861
Hose Clamp

144610861
250205908: RNCC: 3 | RNVC: 2
8TX70D59: RNCC: 5 | RNVC: 9

24 Feb 1993

4730-14-530-2815
Tube To Boss Tee

145302815
01082234: RNCC: 3 | RNVC: 2

27 May 2002

4730-14-297-4814
Pipe Swivel Joint

142974814
NO PRIMARY REF14-297-4814: RNCC: 3 | RNVC: 2
3109228: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-438-8069
Suction Strainer

144388069
516095: RNCC: 3 | RNVC: 2
SOG516095: RNCC: 5 | RNVC: 9
85-693-8222: RNCC: 6 | RNVC: 9

9 Apr 1990

4730-14-224-3942
Tube Nipple

142243942
GSM1307ENSDN41-5TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-507-4152
Tube Nipple

145074152
LL100-CS12L: RNCC: 3 | RNVC: 2

6 Jul 1998

4730-14-549-8845
Tube Cap

145498845
88179-2243: RNCC: 3 | RNVC: 2

17 May 2006

4730-14-509-6849
Tube Coupling Body

145096849
7-20609-63A: RNCC: 3 | RNVC: 2
7-20609-63A: RNCC: 5 | RNVC: 2

28 Oct 1998

4730-14-510-7368
Special Nipple

145107368
3L01-366: RNCC: 3 | RNVC: 2

10 Nov 1998

4730-14-322-0483
Tube To Boss Straight Adapter

143220483
81285: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-566-4978
Tube To Gas Fitting Straight Adapter

145664978
GE12LR3/4EDOMDCF: RNCC: 3 | RNVC: 2
A231004000245: RNCC: 5 | RNVC: 2

18 Nov 2010

4730-14-546-5273
Tube To Boss Straight Adapter

145465273
GE12LM14X1,5EDOMDCF: RNCC: 3 | RNVC: 9
5010604181: RNCC: 5 | RNVC: 2

18 Jul 2005

4730-14-559-9609
Hose Clamp

145599609
7421211715: RNCC: 3 | RNVC: 2
21211715: RNCC: 5 | RNVC: 1
21211715: RNCC: 5 | RNVC: 2

9 Mar 2009

4730-14-585-2006
Pi Straight Adapter

4730-14-563-7624
Tube Coupling

145637624
GZ12LCF: RNCC: 3 | RNVC: 2
GZ12LCF: RNCC: 5 | RNVC: 2
A231004000436: RNCC: 5 | RNVC: 2

11 Mar 2010

4730-14-572-9575
Tube Elbow

145729575
WEE12LROMDCF: RNCC: 3 | RNVC: 2
437100: RNCC: 5 | RNVC: 2

30 Aug 2012

4730-14-454-4185
Manchette S/Bride

144544185
BN329-511-14-08: RNCC: 3 | RNVC: 2
BN329-511F14REP08: RNCC: 5 | RNVC: 2
RAR1529: RNCC: 5 | RNVC: 2

2 Apr 1992

4730-14-228-0707
Soudage/Bra Insert

142280707
0206460270: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-318-9509
Soudage/Bra Insert

143189509
0264701010: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-428-0304
Raccord Union G1/2"

144280304
06-03-1979-05REP0910: RNCC: 3 | RNVC: 2

24 Nov 1988

4730-14-454-4159
Manchette S/Bride

144544159
BN329-511-14-01: RNCC: 3 | RNVC: 2
BN329-511F14REP01: RNCC: 5 | RNVC: 2

2 Apr 1992

4730-14-390-2021
Tuyau/Tube Rosace

4730-14-454-4182
Manchette S/Bride

144544182
BN329-511-14-05: RNCC: 3 | RNVC: 2
BN329-511F14REP05: RNCC: 5 | RNVC: 2
RAR1528: RNCC: 5 | RNVC: 2

2 Apr 1992

4730-14-313-7636
Soudage/Bra Insert

143137636
0268260120: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-454-4184
Manchette S/Bride

144544184
BN329-511-14-06: RNCC: 3 | RNVC: 2
BN329-511F14REP06: RNCC: 5 | RNVC: 2
RAB9289: RNCC: 5 | RNVC: 2

2 Apr 1992

4730-14-489-5911
Coude F/F Galva

144895911
COU-Q00014X00: RNCC: 3 | RNVC: 2

6 Aug 1997

4730-14-488-8591
S/Ensemble Frottant

144888591
MAT422-0074F9ET16: RNCC: 3 | RNVC: 2

10 Jun 1997

4730-14-451-6470
Commande S/Ensemble

144516470
902-040A: RNCC: 3 | RNVC: 2

28 Nov 1991

4730-14-390-2019
Tuyau/Tube Rosace

4730-14-489-5912
Te F/F Galva

144895912
TEO-Q00005X00: RNCC: 3 | RNVC: 2

6 Aug 1997

4730-14-311-8366
Soudage/Bra Insert

143118366
0025270120: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-318-9510
Soudage/Bra Insert

143189510
0264701020: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-311-8364
Soudage/Bra Insert

143118364
0025270050: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-390-2023
Tuyau/Tube Rosace

4730-14-328-2569

4730-14-040-7541

4730-14-329-2549

4730-14-240-5826
Te De Reduction Ens

142405826
5TR8X14X8NN: RNCC: 3 | RNVC: 2
99039844: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-574-4572
Special Nipple

145744572
82686714000: RNCC: 3 | RNVC: 2

22 Jan 2013

4730-14-243-6113

4730-14-338-6077

4730-14-562-5226
Tube To Boss Elbow

145625226
3199 06 17: RNCC: 3 | RNVC: 2
FS0002365: RNCC: 6 | RNVC: 9

2 Nov 2009

4730-14-217-6650

4730-14-248-1472

4730-14-563-7611
Tube Union

145637611
GE28LRCFX: RNCC: 3 | RNVC: 2
A231004000452: RNCC: 5 | RNVC: 2

11 Mar 2010

4730-14-556-0714
Boss Tee

145560714
200014220: RNCC: 3 | RNVC: 2

28 Jan 2008

4730-14-503-6781
Tube To Boss Straight Adapter

145036781
14984: RNCC: 3 | RNVC: 2

23 Jan 1998

4730-14-364-7190
Tube Tee

143647190
R8X16X10L: RNCC: 3 | RNVC: 2

2 Sep 1980

4730-14-534-8004
Water Purification Feeder Injector

145348004
38029: RNCC: 3 | RNVC: 2

7 Apr 2003

4730-14-474-0271
Pipeline Flexible Spacer

144740271
1501-DN100: RNCC: 3 | RNVC: 2

24 Jan 1995

4730-14-432-1145
Pipe Expansion Joint

144321145
DILATOFLEXKARCN-DN80PN10: RNCC: 3 | RNVC: 2

24 May 1989

4730-14-543-8097
Quick Disconnect Coupling Assembly

145438097
C604: RNCC: 3 | RNVC: 9

11 Dec 2004

4730-14-358-6292
Tube Tee

143586292
160-632103: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-231-0473
Tube To Boss Straight Adapter

142310473
224183: RNCC: 3 | RNVC: 2
224183: RNCC: 5 | RNVC: 2
224183: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-554-9140
Tube To Boss Straight Adapter

145549140
717083: RNCC: 3 | RNVC: 2

7 Sep 2007

4730-14-388-8006
Hose To Boss Straight Adapter

143888006
418102613: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-471-5728
Quick Disconnect Coupling Half

144715728
119E4106LTAJ: RNCC: 3 | RNVC: 2

1 Sep 1994

4730-14-408-5492
Hose To Boss Straight Adapter

144085492
208382: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-506-0303
Tube Coupling

145060303
RP1A504650129: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-483-2794
Hose Coupling Assembly

144832794
DA2C729002202: RNCC: 3 | RNVC: 2

29 Aug 1996

4730-14-405-3850
Fluid Passage Bolt

144053850
12160452: RNCC: 3 | RNVC: 2
12016A: RNCC: 5 | RNVC: 9
12016IMPLANTATI0N: RNCC: 5 | RNVC: 9
12016IMPLANTATION: RNCC: 5 | RNVC: 9
12016L: RNCC: 5 | RNVC: 9
12160452: RNCC: 5 | RNVC: 9

27 Nov 1985

4730-14-431-7492
Pipe Flange

144317492
420GB: RNCC: 3 | RNVC: 2

10 May 1989

4730-14-352-7417
Tube Coupling

143527417
120537: RNCC: 3 | RNVC: 2
120537: RNCC: 5 | RNVC: 2

14 Nov 1978

4730-14-032-1578
Pipe Flange

140321578
CMT30E9030AF5ET6DE14REP2: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-474-7524
Tube To Boss Straight Adapter

144747524
0300355L: RNCC: 3 | RNVC: 9
89410685: RNCC: 5 | RNVC: 2
0300355L: RNCC: 5 | RNVC: 9

1 Mar 1995

4730-14-575-7730
Flange To Flange Straight Adapter

145757730
M2811344120200: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-365-3457

4730-14-217-6087
Tape De Pont

142176087
7062RBDN100: RNCC: 3 | RNVC: 9

1 Jan 1965

4730-14-576-1862
Flange To Tube Straight Adapter

145761862
M2821352220000: RNCC: 3 | RNVC: 2

4 Jun 2013

4730-14-418-8130
Conduit Raccord

144188130
DA1D721453012: RNCC: 3 | RNVC: 2

16 Sep 1987

4730-14-262-5751
Element Purgeur

142625751
1221800: RNCC: 3 | RNVC: 2
5500: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-374-7565
Equipe Raccord

143747565
74532: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-365-3056

4730-14-391-7765
Obtura Demi-Collier

143917765
DA2C525090251A1: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-576-7172
Tube Reducer

145767172
82128860000: RNCC: 3 | RNVC: 1

5 Jul 2013

4730-14-260-3442

4730-14-043-0253
Tube Coupling

140430253
PE60001K14: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-518-8083
Tube Coupling

145188083
79W471868805: RNCC: 3 | RNVC: 2
471868804: RNCC: 5 | RNVC: 2
471868805: RNCC: 5 | RNVC: 2
79W471868804: RNCC: 5 | RNVC: 2

21 Feb 2000

4730-14-226-4066
Tube Tee

142264066
986: RNCC: 3 | RNVC: 2
9202041: RNCC: 5 | RNVC: 2
986: RNCC: 5 | RNVC: 2
220-61: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-319-8914
Retour Huil Raccord

143198914
140M130: RNCC: 3 | RNVC: 9

1 Jan 1975

4730-14-031-0502

4730-14-223-1620
Bride Pour Tube

142231620
120534: RNCC: 3 | RNVC: 2
8471205340: RNCC: 3 | RNVC: 2
120534000: RNCC: 3 | RNVC: 9
3099: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-570-5788
Soil Pipe Ferrule With Plug

145705788
67023: RNCC: 3 | RNVC: 2

6 Jan 2012

4730-14-530-6140
Hydraulic System Accessories Manifold

145306140
007311: RNCC: 3 | RNVC: 2

26 Jun 2002

4730-14-563-6018
Tube Coupling Nut

145636018
05L007: RNCC: 3 | RNVC: 2

24 Feb 2010

4730-14-491-5691
Racc0rd

144915691
520416: RNCC: 3 | RNVC: 2
F300 0T 003 3847: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-525-6264
Tube Union

145256264
20 236 910 1120: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-562-7351
Tube Coupling

145627351
7700019609: RNCC: 3 | RNVC: 2

18 Nov 2009

4730-14-567-4897
Hose Clamp

145674897
7400994557: RNCC: 3 | RNVC: 2
994557: RNCC: 3 | RNVC: 2

18 Mar 2011

4730-14-566-1461
Tube To Boss Straight Adapter

145661461
82523472000: RNCC: 3 | RNVC: 2

21 Oct 2010

4730-14-399-3004
Tu Droit Adaptateur

4730-14-206-1750

4730-14-258-0800

4730-14-565-4275
Hose Clamp

145654275
30084.00.03: RNCC: 3 | RNVC: 2
MDS81P065: RNCC: 5 | RNVC: 2

18 Aug 2010

4730-14-575-4495
Tube Tee

145754495
D190 05B: RNCC: 3 | RNVC: 2

8 Apr 2013

4730-14-568-9644
Tube Elbow

145689644
CFS1815: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-223-5957
Embout De Flexible

142235957
0335580: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-032-1557
Pipe Flange

140321557
CMT30E9030AF3ET3BISDE57REP3: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-250-3468
Swivel Retaining Pipe Flange

142503468
5170777300: RNCC: 3 | RNVC: 2
707773: RNCC: 5 | RNVC: 1
707773: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-506-0309
Tube Tee

145060309
RP1A505982001: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-222-2576

4730-14-262-1529

4730-14-468-2628
Swivel Flange To Hose Connector

144682628
A73269: RNCC: 3 | RNVC: 2

16 Feb 1994

4730-14-551-8247
Quick Disconnect Coupling Half

145518247
PCF52G4Z2: RNCC: 3 | RNVC: 2
436520: RNCC: 5 | RNVC: 2
PCF52G4Z2: RNCC: 5 | RNVC: 9

27 Oct 2006

Load More Results