4730-14-575-9805

2590-66-112-9464 2590661129464 661129464 is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. it may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. excludes cap, vent, fuel storage tank; and cover (1), (as modified).

2610-14-463-4813 2610144634813 144634813 is a mechanical device made of rubber, chemicals, fabric and steel or other materials, which, when mounted on a vehicular wheel, provides the traction and contains the fluid that sustains the load. tube type tires are a form to inclose an inner tube containing air under pressure. tubeless tires incorporate carcass materials and construction to provide fluid retention equal to that of a conventional tire and tube.

3120-27-055-1461 3120270551461 270551461 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.

2590-99-817-9659 2590998179659 998179659 ROLLER,QUADRANT SHA

2530-01-507-2388 2530015072388 015072388 is a valve designed to distribute the input power to the individual circuits and to maintain the pressures in these circuits at a preset level above which pressure compensation between the individual circuits may be effected. in case of pressure drop at the input or a lowering of the pressure of one circuit below a present value, the circuits not affected are kept at their protected minimum pressures. excludes valves (1), safety relief. see also valve (1), relay, air pressure valve (1), brake pneumatic.