4730-14-516-1910

2805-41-001-5076 2805410015076 410015076 is a metallic and/or non-metallic cover of various shapes specifically designed to protect the timing gear(s) mechanism of a gasoline or diesel engine. it may have a timing pointer, sealing ring(s), stud(s), dowel pin(s), shield(s), or the like.

6110-19-001-5076 6110190015076 190015076 is an item consisting of contacts, a magnetic core, and a coil with or without inclosure which is used to repeatedly establish and break a circuit. the item does not provide overload protection and is not used in line to control any other electrical controls. excludes relay, electromagnetic and starter, motor.l circuit. exludes relay, electro-magnetic and starter, motor.

9915-15-001-5076 9915150015076 150015076 MEDAGLIERE PER DINN

5365-00-001-5076 5365000015076 000015076 RING,SEALING

5310-33-001-5076 5310330015076 330015076 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.