What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 176 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 176 of 185

4730-14-430-8499
Quick Disconnect Wye

144308499
RCS11-8103: RNCC: 3 | RNVC: 2

24 Mar 1989

4730-14-324-4951
Tube To Boss Straight Adapter

143244951
A60-71319: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-238-6794
Pipe Flange

142386794
B0044BB51APL2-2REP33: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-325-8882
Pipe Flange

143258882
U1093FBF2-88-9UE9P: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-231-5751
Anchor And Reinforcement Pipe Clamp

142315751
NO PRIMARY REF14-231-5751: RNCC: 3 | RNVC: 2
840T12X17: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-370-3861
Tube Fitting Brazing Ferrule

143703861
BN320-513CREP10: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-481-7560
Pipe Flange

144817560
34 25 56: RNCC: 3 | RNVC: 2

30 May 1996

4730-14-269-0092
Tube To Boss Straight Adapter

142690092
52-5-10X100: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-537-6194
Tube Coupling

145376194
20-7-E-30CA-3344-017-001REP8: RNCC: 3 | RNVC: 2

12 Nov 2003

4730-14-390-4081
Fluid Passage Bolt

143904081
NO PRIMARY REF14-390-4081: RNCC: 3 | RNVC: 2
2-535878-9: RNCC: 5 | RNVC: 9

26 Jan 1984

4730-14-460-9234
Tube To Boss Straight Adapter

144609234
UMLWCO10 3/8": RNCC: 3 | RNVC: 9

16 Feb 1993

4730-14-032-1689
Pipe Flange

140321689
CMT30E9053PL1TUYAU88-9: RNCC: 3 | RNVC: 2
CMT30E9053-88-9: RNCC: 5 | RNVC: 2

8 Dec 1981

4730-14-338-0792
Tube Coupling Assembly

143380792
0-3701S20X16A: RNCC: 3 | RNVC: 2
0-3701S20X16A: RNCC: 5 | RNVC: 9
85-688-9390: RNCC: 6 | RNVC: 9

6 Nov 1976

4730-14-504-0666
Tube To Boss Straight Adapter

145040666
U3-4C: RNCC: 3 | RNVC: 2
CS1-0.003.986: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-378-2931
Tube To Boss Straight Adapter

143782931
S003-162-67: RNCC: 3 | RNVC: 2
S003162-67: RNCC: 5 | RNVC: 2

20 Jul 1982

4730-14-452-0200
Quick Disconnect Coupling Half

144520200
MRA04-3904/OD: RNCC: 3 | RNVC: 2
MRA04.3904/0D: RNCC: 5 | RNVC: 2

18 Dec 1991

4730-14-319-0226
Pipe Flange

143190226
NO PRIMARY REF14-319-0226: RNCC: 3 | RNVC: 2
01-003968: RNCC: 5 | RNVC: 9
01003968: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-314-5598
Fluid Pressure Line Multiple Connector

143145598
121S75-448-50-0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-457-6994
Pipe Joint Welding Ring

144576994
BN329-514DN50INOXEXTRUDE: RNCC: 3 | RNVC: 2
BN329514DN50INOX: RNCC: 3 | RNVC: 2
RAR1548: RNCC: 5 | RNVC: 2

15 Sep 1992

4730-14-296-9558
Self-Sealing Coupling Assembly

142969558
H0200100000NW0A: RNCC: 3 | RNVC: 2
15108F: RNCC: 5 | RNVC: 9
1510-8F: RNCC: 5 | RNVC: 9
C15108F: RNCC: 5 | RNVC: 9
H0200100000NW0A: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-496-7664
Quick Disconnect Coupling Half

144967664
WA06334-58: RNCC: 3 | RNVC: 2
WA0633458: RNCC: 5 | RNVC: 2
5010341273: RNCC: 5 | RNVC: 2
F300 0T 022 0508: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-495-3133
Contre-Ecrou

144953133
NO PRIMARY REF14-495-3133: RNCC: 3 | RNVC: 2
8040909: RNCC: 5 | RNVC: 9
F300 0T 019 0118: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-519-7039
Tube To Boss Straight Adapter

145197039
MAT164-0178F29: RNCC: 3 | RNVC: 2

31 Mar 2000

4730-14-221-6617
Mamelon Double Pour

142216617
A10-75-610-06-0: RNCC: 3 | RNVC: 2
A10-75-610-06-0: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-395-2204
Tube To Boss Straight Adapter

143952204
1464-40-03REP4: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-350-5676
Tube To Boss Straight Adapter

143505676
A4-70967: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-364-8729
Pipe Flange

143648729
4730CA-108: RNCC: 2 | RNVC: 2
MEC10375: RNCC: 3 | RNVC: 2
4730CA108: RNCC: 3 | RNVC: 9

2 Sep 1980

4730-14-343-3782
Quick Disconnect Coupling Half

143433782
S036-0 3-4: RNCC: 3 | RNVC: 2
S036-0 3-4A: RNCC: 5 | RNVC: 2

16 Jun 1977

4730-14-490-0783
Pipe Expansion Joint

144900783
2-1-96-0406: RNCC: 3 | RNVC: 2

10 Sep 1997

4730-14-304-6657
Pipe Flange

143046657
915-2-51-99: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-408-8546
Reducteur Pression

144088546
9PR-400-S-2: RNCC: 3 | RNVC: 2
9PR-400-S-2: RNCC: 3 | RNVC: 2
203-C-457: RNCC: 5 | RNVC: 2

2 Apr 1986

4730-14-252-7717

4730-14-571-0985
Flange Elbow

145710985
M2821352400000: RNCC: 3 | RNVC: 2

20 Feb 2012

4730-14-516-4148
Tube To Boss Straight Adapter

145164148
A011416 08 06: RNCC: 3 | RNVC: 2
2816-8-6: RNCC: 5 | RNVC: 2

22 Sep 1999

4730-14-446-9792
Tube Tee

144469792
JBPL6/8: RNCC: 3 | RNVC: 2
JBPL6/8: RNCC: 3 | RNVC: 9

22 Apr 1991

4730-14-388-7594
Tube To Boss Straight Adapter

143887594
RD010/18: RNCC: 3 | RNVC: 2
M4ZS500D5681A: RNCC: 5 | RNVC: 2
RD010-10SP: RNCC: 5 | RNVC: 2

29 Nov 1983

4730-14-348-8134
Tuyauteri Obturateu

143488134
60BRT267-12: RNCC: 3 | RNVC: 2

19 Apr 1978

4730-14-214-3721
Raccord De Pompe Sp

142143721
PR5-69361: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-389-2882
Tube Equipe

143892882
B0012-017F7: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-343-2096
Self-Sealing Coupling Half

143432096
SMS158-10-01: RNCC: 3 | RNVC: 2

16 Jun 1977

4730-14-374-5896
Fluid Pressure Line Multiple Connector

143745896
150-0029: RNCC: 3 | RNVC: 2
8020368: RNCC: 5 | RNVC: 2

30 Jan 1982

4730-14-242-5781
Tube Tee

142425781
1050-75-191-00: RNCC: 3 | RNVC: 2
1050-75-191-00-0: RNCC: 3 | RNVC: 2
75-191-00: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-556-1217
Pipe Flange

145561217
0000460160: RNCC: 3 | RNVC: 2

4 Feb 2008

4730-14-572-9594
Tube Elbow

145729594
WSV08LCF: RNCC: 3 | RNVC: 2

30 Aug 2012

4730-14-334-2648

4730-14-412-4261

4730-14-259-7838
Bouchon Filete Spec

142597838
112273: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-326-8332

4730-14-209-1208

4730-14-307-5178

4730-14-504-9081
Pipeline Flexible Spacer

145049081
ERV65-10ROUGE: RNCC: 3 | RNVC: 2
53D01934-KCC-DN65PN16: RNCC: 3 | RNVC: 2
DILATOFLEX-K-CC-DN65-PN16: RNCC: 3 | RNVC: 2
GR1/65/KR320-WG/E/PN16: RNCC: 3 | RNVC: 2
97/10031-ERV-DOUBLER-DN65PN16: RNCC: 3 | RNVC: 9
ERV-DOUBLEROUGE-DN65PN16: RNCC: 3 | RNVC: 9
KR320WG-ORANGE-DN65PN16: RNCC: 5 | RNVC: 2
SYQ5777: RNCC: 5 | RNVC: 2

2 Jun 1999

4730-14-354-9595
Self-Sealing Coupling Assembly

143549595
RBE06-2101IAFB: RNCC: 3 | RNVC: 2
RBE6-2101IAFB: RNCC: 5 | RNVC: 2

20 Feb 1979

4730-14-297-3733
Sediment Strainer Element

142973733
NO PRIMARY REF14-297-3733: RNCC: 3 | RNVC: 2
CDC66373: RNCC: 5 | RNVC: 2
P13817F0052-15066373: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-414-6872
Tube To Gas Fitting Straight Adapter

144146872
0114-06-13: RNCC: 3 | RNVC: 2
01140613: RNCC: 3 | RNVC: 2

25 Feb 1987

4730-14-261-2821
Fluid Passage Bolt

142612821
175-72-65: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-367-9910
Pipe Flange

143679910
GSM162-011F16REPH: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-297-8971
Bloc De Derivation

142978971
411MA0162FB24: RNCC: 3 | RNVC: 2
411MA162FB24: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-361-0343

4730-14-306-7086

4730-14-505-3481
Lubrication Fitting

145053481
E75501903: RNCC: 3 | RNVC: 2
V75501903: RNCC: 5 | RNVC: 9

18 Mar 1998

4730-14-359-6095
Fluid Pressure Line Multiple Connector

143596095
109-12JE18X150: RNCC: 3 | RNVC: 2
99632121841: RNCC: 3 | RNVC: 2
99-632-12-184-1: RNCC: 5 | RNVC: 2

15 Oct 1979

4730-14-387-8861
Tube Tee

143878861
713 D 06 06 06: RNCC: 3 | RNVC: 2
P165D060606: RNCC: 3 | RNVC: 2
74713D060606: RNCC: 5 | RNVC: 2
713D06 06 06: RNCC: 5 | RNVC: 2
713D06-06-06: RNCC: 5 | RNVC: 2
713D060606: RNCC: 5 | RNVC: 2
74713D060606: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-398-1408
Tube To Boss Straight Adapter

143981408
355A53-3003-20: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-383-8687
Bulkhead Hose Connector

143838687
64353280001BREPAAH-F15A23-23DN80: RNCC: 3 | RNVC: 2

11 Apr 1983

4730-14-487-4997
Fluid Passage Bolt

144874997
95337792: RNCC: 3 | RNVC: 2
9-533779-2: RNCC: 5 | RNVC: 2

10 Apr 1997

4730-14-262-1728
Pipe Flange

142621728
7062DL1F1F66-5-14CD2-5: RNCC: 2 | RNVC: 2
MEC10317: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-449-5551
Tube Union

144495551
RACCORD IMP R1 EM L33,7: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-564-4899
Tube To Boss Straight Adapter

145644899
EGE22LREDCF: RNCC: 3 | RNVC: 2
A231004000342: RNCC: 5 | RNVC: 2

3 May 2010

4730-14-559-7449
Quick Disconnect Coupling Half

145597449
CBI06.7151/IA/JE: RNCC: 3 | RNVC: 2

12 Feb 2009

4730-14-408-4038
Quick Disconnect Coupling Half

144084038
CHM12-17: RNCC: 3 | RNVC: 2
CHM12X17: RNCC: 5 | RNVC: 2

19 Mar 1986

4730-14-494-8266
Fluid Pressure Line Multiple Connector

144948266
NO PRIMARY REF14-494-8266: RNCC: 3 | RNVC: 2
505023K: RNCC: 5 | RNVC: 9
F300 0T 017 9525: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-211-6064
Tuyauterie De Press

142116064
NO PRIMARY REF14-211-6064: RNCC: 3 | RNVC: 2
E137D460: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-390-4432
Tube Tee

143904432
Q1-5TR20X14X20NN: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-384-4310
Contre-Bride

143844310
E64-35-3200-122BF11-22ETF12-22D-: RNCC: 3 | RNVC: 1
E64353200122BF1122ETF1222D2DN25: RNCC: 5 | RNVC: 2

4 May 1983

4730-14-515-8378
Fluid Flow Restrictor Unit

145158378
MAT164-0132F01-R-DPP00022: RNCC: 3 | RNVC: 2

16 Aug 1999

4730-14-252-2790
Tube To Boss Straight Adapter

142522790
1050-75-193-00: RNCC: 3 | RNVC: 2
75-193-00: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-261-2585
Raccord

142612585
175-52-206: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-358-1172
Threaded Tube Fitting Plug

143581172
02017500: RNCC: 3 | RNVC: 2
542506: RNCC: 5 | RNVC: 2
2017500: RNCC: 5 | RNVC: 2
M4ZS450D1784: RNCC: 5 | RNVC: 2
5000815073: RNCC: 5 | RNVC: 2
75501578: RNCC: 5 | RNVC: 2
E75501578: RNCC: 5 | RNVC: 2
02017500: RNCC: 5 | RNVC: 2

13 Aug 1979

4730-14-324-1371
Fluid Passage Bolt

143241371
A0050-263F7: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-424-3203
Quick Disconnect Coupling Half

144243203
RBE06-1152/IA/4,5: RNCC: 3 | RNVC: 2
RBE06-1152IA4-5: RNCC: 5 | RNVC: 2
91363648: RNCC: 5 | RNVC: 2

19 May 1988

4730-14-254-2490
Tube Coupling

142542490
6907: RNCC: 3 | RNVC: 2
00375-16: RNCC: 5 | RNVC: 2
D00375-16: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-485-0718
Bulkhead Hose Connector

144850718
332A54-0001-0086: RNCC: 3 | RNVC: 2

19 Dec 1996

4730-14-522-3791
Swivel Flange To Hose Connector

145223791
0340-4000: RNCC: 3 | RNVC: 2
SAF0340-4000: RNCC: 5 | RNVC: 9

25 Oct 2000

4730-14-374-4469
Lubrication Fitting

143744469
4001-6X10: RNCC: 3 | RNVC: 2
ALG4001-6X10: RNCC: 5 | RNVC: 2

8 Dec 1981

4730-14-384-9326
Tube To Boss Straight Adapter

143849326
701523-01: RNCC: 3 | RNVC: 2

2 Jun 1983

4730-14-370-7032
Tube To Boss Straight Adapter

143707032
NO PRIMARY REF14-370-7032: RNCC: 3 | RNVC: 2
GE10SRED: RNCC: 5 | RNVC: 2
GE10SRED: RNCC: 5 | RNVC: 9

5 Jun 1981

4730-14-516-7323
Quick Disconnect Coupling Half

145167323
0799-1298: RNCC: 3 | RNVC: 2
SAF0799-1298: RNCC: 5 | RNVC: 9

13 Oct 1999

4730-14-532-4496
Pipe Flange

145324496
341A65-5080-28: RNCC: 3 | RNVC: 2

30 Oct 2002

4730-14-501-2171
Tube To Boss Straight Adapter

145012171
421-005: RNCC: 3 | RNVC: 2
421.005: RNCC: 3 | RNVC: 2
F300 0T 025 2576: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-389-4500
Tube Tee

143894500
365A52-1294-20: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-452-8584
Tube Union

144528584
GE12PL-71: RNCC: 3 | RNVC: 2
362356: RNCC: 5 | RNVC: 2

22 Jan 1992

4730-14-508-3827
Tube Fitting Socket Welded Ferrule

145083827
FI 2.12.26.01: RNCC: 3 | RNVC: 2

9 Sep 1998

4730-14-282-6373
Coude Pivotant Tuya

142826373
P620-27-90ARS: RNCC: 3 | RNVC: 2
620-27-90ARS: RNCC: 5 | RNVC: 2
P620-2790ARS: RNCC: 5 | RNVC: 2
85-670-1680: RNCC: 6 | RNVC: 9

1 Jan 1971

4730-14-369-4392
Quick Disconnect Coupling Half

143694392
M0F20 3-4B: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-304-5726

4730-14-237-2205
Raccord De Securite

142372205
800: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-575-7776
Flange To Tube Elbow

145757776
M2811350100000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-344-5248

4730-14-338-0846

4730-14-481-7585
Tube To Boss Straight Adapter

144817585
F3PB8-1-4: RNCC: 3 | RNVC: 2
202369010160: RNCC: 5 | RNVC: 2

30 May 1996

4730-14-513-1304
Quick Disconnect Coupling Half

145131304
RBE032804-OD-IC: RNCC: 3 | RNVC: 2
RBE032804-IC-0D: RNCC: 5 | RNVC: 2
RBE032804IC0D: RNCC: 5 | RNVC: 2

5 Mar 1999

4730-14-559-2053
Tube Outlet

145592053
EA1M707-13-01: RNCC: 3 | RNVC: 2

15 Dec 2008

4730-14-486-5438
Pipe Expansion Joint

144865438
2-1-95-0026: RNCC: 3 | RNVC: 2
6MT1DN200/1: RNCC: 5 | RNVC: 2

21 Mar 1997

4730-14-282-4434
Tube Tee

142824434
TR2-10106-631X6218: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-470-2738
Pipe Flange

144702738
E29203A16X50AKB: RNCC: 2 | RNVC: 2
E29-203-01APN10DN50Z2CND17-12: RNCC: 5 | RNVC: 2
E29203A10X50AKB: RNCC: 5 | RNVC: 2

10 Jun 1994

4730-14-432-4695
Pipe Flange

144324695
BN329-506C2DN350: RNCC: 3 | RNVC: 2

14 Jun 1989

4730-14-224-3764
Quick Disconnect Coupling Half

142243764
E29572-20QUEUEFILETEE21-27: RNCC: 2 | RNVC: 2

1 Jan 1966

4730-14-453-8055
Sediment Strainer Element

144538055
630011-01: RNCC: 3 | RNVC: 2

12 Mar 1992

4730-14-304-0427
Tube Tee

143040427
R 06 10 08: RNCC: 3 | RNVC: 2
R6X10X8: RNCC: 5 | RNVC: 2
R6-10-8: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-390-6680
Embout A Souder

143906680
8867250047: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-446-4297
Coude Pour Tube

4730-14-239-9600

4730-14-356-3874
Self-Sealing Coupling Half

143563874
RU47058: RNCC: 3 | RNVC: 2
RU47058: RNCC: 5 | RNVC: 2
85-690-0056: RNCC: 6 | RNVC: 9
85-800-7437: RNCC: 6 | RNVC: 9

25 Apr 1979

4730-14-310-4240
Tube Repair Plug

143104240
K1712DREP1TAMC16: RNCC: 3 | RNVC: 2
K79-12REP1TAMP0N: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-493-3985
Quick Disconnect Coupling Half

144933985
GPL33-6840: RNCC: 3 | RNVC: 2
F300 0T 012 9104: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-367-9890
Tube Fitting Clinch Sleeve

143679890
Q1-605-15: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-300-7717
Diaphragme

143007717
NO PRIMARY REF14-300-7717: RNCC: 3 | RNVC: 2
30F3002REP3: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-458-5887
Quick Disconnect Coupling Half

144585887
N012-192-87: RNCC: 3 | RNVC: 2
N01219287: RNCC: 5 | RNVC: 2
91629302: RNCC: 5 | RNVC: 2

27 Oct 1992

4730-14-507-0300
Quick Disconnect Coupling Half

145070300
RBE06-7708/IC/JV/OD/HP: RNCC: 3 | RNVC: 2

3 Jun 1998

4730-14-332-4660
Tube Fitting Clinch Sleeve

143324660
U1134F12-48CU: RNCC: 2 | RNVC: 2
9124480250: RNCC: 5 | RNVC: 2
BCTH48: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-450-7686
Fluid Passage Bolt

144507686
BC3560-12ACIER: RNCC: 3 | RNVC: 2
98-677-105-003: RNCC: 3 | RNVC: 2
98677105003: RNCC: 5 | RNVC: 2

23 Oct 1991

4730-14-452-6813
Sediment Strainer Element

144526813
250-50-46X6INOX: RNCC: 3 | RNVC: 2

15 Jan 1992

4730-14-552-7098
Anchor And Reinforcement Pipe Clamp

145527098
92-132-B40-B40-56-33-SW: RNCC: 3 | RNVC: 2

25 Jan 2007

4730-14-278-5795
Self-Sealing Coupling Assembly

142785795
3678-042: RNCC: 3 | RNVC: 2
3632-042: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-309-7399
Fluid Pressure Line Multiple Connector

143097399
612-16-90ARSJ: RNCC: 3 | RNVC: 2
453-01-16: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-410-0744
Pipe Expansion Joint

144100744
307-224-100-25-80: RNCC: 3 | RNVC: 2

4 Jun 1986

4730-14-261-8509
Pipe Flange

142618509
RUHB7-30-17: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-413-5837
Tube Coupling

144135837
LL011-CC20S: RNCC: 3 | RNVC: 2
88772000: RNCC: 5 | RNVC: 2

17 Dec 1986

4730-14-217-3331
Mamelon Special

142173331
3160S76-11-445: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-337-9836
Fluid Pressure Line Multiple Connector

143379836
NO PRIMARY REF14-337-9836: RNCC: 3 | RNVC: 2
9710-002: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-380-9174
Allonge Graisseur

143809174
ST100S114-6P1: RNCC: 3 | RNVC: 2
F3014ST100S114-6P1: RNCC: 5 | RNVC: 2

14 Dec 1982

4730-14-441-5694
Tube Union

144415694
LN320-036REP09: RNCC: 3 | RNVC: 2
1901390: RNCC: 3 | RNVC: 2
STRAUB-FLEX1L139,7EPDM/ACIER: RNCC: 5 | RNVC: 2
FLEX1L139,7PN13EPDM/ACIER: RNCC: 5 | RNVC: 2
190 1390: RNCC: 5 | RNVC: 9

4 Sep 1990

4730-14-313-4650
Bloc Mobile

143134650
GSM525-007: RNCC: 3 | RNVC: 2
A0187-001: RNCC: 5 | RNVC: 2
GSM525-07: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-563-3426
Quick Disconnect Coupling Half

145633426
RBE06.1806/IC/DG: RNCC: 3 | RNVC: 2

28 Jan 2010

4730-14-412-0836
Quick Disconnect Coupling Half

144120836
23RE-LN320001DN20REP2TYPEB: RNCC: 3 | RNVC: 2
LN320001DN20REP2TYPEB: RNCC: 5 | RNVC: 2
RAB9540: RNCC: 5 | RNVC: 2

6 Oct 1986

4730-14-524-0981
Pipe Flange

145240981
MAT162-0321F4DN100: RNCC: 3 | RNVC: 2
MAT162-0321DN100FEMELLE: RNCC: 5 | RNVC: 2

27 Feb 2001

4730-14-572-9582
Tube To Boss Straight Adapter

145729582
GE06ZLR1/4EDCF: RNCC: 3 | RNVC: 2
437352: RNCC: 5 | RNVC: 2

30 Aug 2012

4730-14-560-8441
Hose Clamp

145608441
IBA1467: RNCC: 3 | RNVC: 2
IBA1467: RNCC: 5 | RNVC: 2

27 May 2009

4730-14-308-0690

4730-14-426-7466
Tube Tee

144267466
4730HEING033,7X6,3-17,2X2,3: RNCC: 2 | RNVC: 2

20 Sep 1988

4730-14-460-3448
Self-Sealing Coupling Assembly

144603448
SKK 12-M10X1-VB: RNCC: 3 | RNVC: 2
SMK 12-M10X1-VB: RNCC: 5 | RNVC: 2
SMK 12-M10X1-VB: RNCC: 5 | RNVC: 2

21 Jan 1993

4730-14-364-3458
Speciale Bride

143643458
5010111149: RNCC: 3 | RNVC: 2

7 Aug 1980

4730-14-418-6044
Adaptateur

144186044
S4710X0002-6642: RNCC: 3 | RNVC: 2

2 Sep 1987

4730-14-345-2451
Tube Tee

143452451
FB1A747-11: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-558-6662
Tube Tee

145586662
1038082300: RNCC: 3 | RNVC: 2
50219594: RNCC: 5 | RNVC: 9

24 Oct 2008

4730-14-338-3347
Bulkhead Hose Connector

143383347
SP1-02-03-01: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-222-6555
Tube Fitting Brazing Ferrule

142226555
GSM1297F1AF1BTABLEAU2D1-30I20: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-505-3133
Swivel Flange To Hose Elbow

145053133
EW12-PSM-ED-0MD: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-441-7576
Quick Disconnect Coupling Half

144417576
RBE06-6810/QR: RNCC: 3 | RNVC: 2

17 Sep 1990

4730-14-540-2468
Raccord Tournant

145402468
007090102: RNCC: 3 | RNVC: 2

16 Mar 2004

4730-14-563-6926
Quick Disconnect Coupling Half

145636926
RMI16.6164: RNCC: 3 | RNVC: 2

5 Mar 2010

4730-14-572-1561
Pipe Nipple

145721561
NOR003703: RNCC: 3 | RNVC: 2

12 Jun 2012

4730-14-376-3551
Pipe Flange

143763551
065-30-9013PL2DN150: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-222-4796

4730-14-323-5733
Fluid Passage Bolt

143235733
NO PRIMARY REF14-323-5733: RNCC: 3 | RNVC: 2
0944700302: RNCC: 5 | RNVC: 2
5435-1: RNCC: 5 | RNVC: 9
0944700302: RNCC: 5 | RNVC: 9
944700302: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-268-1265
Tube Tee

142681265
6784-1DJ110: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-407-0241
Hose To Boss Straight Adapter

144070241
AF150-08: RNCC: 3 | RNVC: 2

29 Jan 1986

4730-14-269-2045
Pipe Flange

142692045
7066EE1M30: RNCC: 2 | RNVC: 2
4730BJ-30M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-254-2739
Tube To Boss Straight Adapter

142542739
G00377-49: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-453-8060
Sediment Strainer Element

144538060
200002-04: RNCC: 3 | RNVC: 2

12 Mar 1992

4730-14-414-2327
Pipe Flange

144142327
U1240-11B2SPN100DN100Z2CND1712T3: RNCC: 3 | RNVC: 2

27 Jan 1987

4730-14-435-3256
Tube To Boss Straight Adapter

144353256
4A22-26X150NU: RNCC: 3 | RNVC: 2

7 Nov 1989

4730-14-461-3087
Tube Fitting Brazing Ferrule

144613087
2-92-52-M2-P11: RNCC: 3 | RNVC: 2

3 Mar 1993

4730-14-333-5173
Barillet A 6 Voies

143335173
GSM163-007BF30: RNCC: 3 | RNVC: 2
GSM163-07BF30: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-365-3493

4730-14-365-2902

4730-14-502-5544
Raccord

145025544
5000821356: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-561-4351
Special Nipple

145614351
CR490539: RNCC: 3 | RNVC: 2

17 Jul 2009

4730-14-383-8691
Bulkhead Hose Connector

143838691
64353280001BREPAAH-F7A13-23DN150: RNCC: 3 | RNVC: 2

11 Apr 1983

4730-14-366-8939
Quick Disconnect Coupling Half

143668939
RBE11-6103: RNCC: 3 | RNVC: 2

11 Dec 1980

4730-14-407-4298
Tube Tee

144074298
18-38-33-42CO: RNCC: 3 | RNVC: 2
TMCA38X33-42N: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-414-8936
Pipe Flange

144148936
E29282DN250: RNCC: 2 | RNVC: 2
E29-282DN250: RNCC: 5 | RNVC: 2

18 Mar 1987

4730-14-463-0763
Tube Fitting Brazing Ferrule

144630763
MAT164-0043F3: RNCC: 3 | RNVC: 2

18 May 1993

4730-14-259-3825
Bouchon Arriere

142593825
J05403-01-0200P005: RNCC: 3 | RNVC: 2
PA253-5M835-5P15A: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-346-7113
Pipe Flange

143467113
6784-1EA50A: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-309-1779
Tube Coupling

143091779
359602X: RNCC: 3 | RNVC: 2
25249A: RNCC: 5 | RNVC: 2
85-800-3998: RNCC: 6 | RNVC: 9

1 Jan 1974

4730-14-520-0481
Fluid Flow Restrictor Unit

145200481
1199903088FS: RNCC: 3 | RNVC: 2
119-9903-088FS: RNCC: 5 | RNVC: 2
CAE01353: RNCC: 5 | RNVC: 2

9 May 2000

4730-14-207-3392
Fluid Passage Bolt

142073392
9775060001: RNCC: 3 | RNVC: 2
9775-06-00-01: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-383-0912
Self-Sealing Coupling Assembly

143830912
9970-123-165: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-268-1199
Pipe Flange

142681199
6784-1DF50: RNCC: 2 | RNVC: 2
MEC11197: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-355-5310
Hose Coupling Assembly

143555310
2606-02-20A: RNCC: 3 | RNVC: 2
2606-02-20A: RNCC: 5 | RNVC: 9
85-689-9853: RNCC: 5 | RNVC: 9

19 Mar 1979

4730-14-394-5799
Self-Sealing Coupling Assembly

143945799
RBE8-21020D-HP: RNCC: 3 | RNVC: 2

28 Aug 1984

4730-14-427-3391
Tube To Boss Straight Adapter

144273391
Q1-5GE10LRK12X17CO: RNCC: 3 | RNVC: 2
292374: RNCC: 5 | RNVC: 2

13 Oct 1988

4730-14-378-2393
Demi Manchon-Union

143782393
MAT100-04-00-1: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-290-9454

4730-14-417-8661
Tube To Boss Straight Adapter

144178661
4A10-12-17CYL: RNCC: 3 | RNVC: 2
4A10-12-17CYL: RNCC: 3 | RNVC: 9
4A10-12X17CYL: RNCC: 3 | RNVC: 9
4A10-12X17CYL: RNCC: 5 | RNVC: 2

29 Jul 1987

4730-14-338-1510
Quick Disconnect Coupling Half

143381510
NO PRIMARY REF14-338-1510: RNCC: 3 | RNVC: 2
19-140SANSFILETAGE: RNCC: 5 | RNVC: 9
FIG19DN40SANSFILETAGE: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-413-0124
Raccord Sup.Equipe

144130124
0910-513-000A: RNCC: 3 | RNVC: 2

18 Nov 1986

4730-14-566-6333
Quick Disconnect Coupling Assembly Set

145666333
332A97-7672-00: RNCC: 3 | RNVC: 2
332A97767200: RNCC: 5 | RNVC: 2

1 Dec 2010

4730-14-210-0889
Mamelon Male Specia

142100889
A1-72338: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-495-0744
Fuel Feeder Manifold

144950744
128-64-008: RNCC: 3 | RNVC: 2
F300 0T 018 3063: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-309-1585
Quick Disconnect Coupling Half

143091585
QSL20-05: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-240-7119
Manchette Speciale

142407119
NG411-02-60PL1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-259-9344
Mamelon Male

142599344
A14-71545: RNCC: 3 | RNVC: 2
613-989-109-0: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-552-5899
Quick Disconnect Coupling Half

145525899
RBE03.7150/IC/3: RNCC: 3 | RNVC: 2

18 Jan 2007

4730-14-491-1008
Tube To Boss Straight Adapter

144911008
500-2-200: RNCC: 3 | RNVC: 2
F300 0T 001 4066: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-260-1311
Raccord Equipe

142601311
R4A514-31: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-378-8320
Raccord Support

143788320
A21B742329030: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-567-3239
Flange To Tube Elbow

145673239
M4721350200100: RNCC: 3 | RNVC: 2

7 Mar 2011

4730-14-561-5989
Tube Coupling Nut

145615989
10BMLS: RNCC: 3 | RNVC: 2
000801: RNCC: 5 | RNVC: 2
20 250 100 1060: RNCC: 5 | RNVC: 2
4730PL0968894: RNCC: 6 | RNVC: 9

3 Aug 2009

4730-14-356-6841

4730-14-209-4270

4730-14-293-4232
Fluid Pressure Line Multiple Connector

142934232
F751-011: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-269-1789
Pipe Flange

142691789
7066CB1-57: RNCC: 2 | RNVC: 2
4730BD-57: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-485-3747
Compensateur Dilata

144853747
362026-02: RNCC: 3 | RNVC: 2
76042804000: RNCC: 3 | RNVC: 2

21 Jan 1997

4730-14-209-2876
Raccord Special

142092876
3130-76-71-303: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-320-7299
Tube To Gas Fitting Straight Adapter

143207299
A580-071: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-456-3113
Tube To Boss Straight Adapter

144563113
LV122CS2027S: RNCC: 3 | RNVC: 2
91594220: RNCC: 5 | RNVC: 9
85-694-6841: RNCC: 6 | RNVC: 9

25 Jun 1992

4730-14-373-3096
Tube To Boss Straight Adapter

143733096
NO PRIMARY REF14-373-3096: RNCC: 3 | RNVC: 2
B31VA0120-044: RNCC: 5 | RNVC: 9

21 Oct 1981

4730-14-402-9812
Quick Disconnect Coupling Half

144029812
RBE19-2104JV: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-497-7448
Bulkhead Hose Connector

144977448
J05085-01-0310P011: RNCC: 3 | RNVC: 2

15 Oct 1997

4730-14-369-4406
Fluid Pressure Line Multiple Connector

143694406
NDR13-6: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-303-5730
Fluid Pressure Line Multiple Connector

143035730
A77119-1: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-401-8312
Tube To Gas Fitting Straight Adapter

144018312
AIWCYL12-1-4: RNCC: 3 | RNVC: 9

13 Jun 1985

4730-14-338-0795
Tube To Boss Straight Adapter

143380795
5-3601S63A: RNCC: 3 | RNVC: 2
5-3601S63A: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-577-5945
Pipe True Wye

145775945
SE248094: RNCC: 3 | RNVC: 2
A430400100623: RNCC: 5 | RNVC: 2

26 Sep 2013

4730-14-576-3774
Tube Outlet

145763774
10620342: RNCC: 3 | RNVC: 1

14 Jun 2013

4730-14-395-7651
Raccordement Embout

143957651
DA2C512484611A1: RNCC: 3 | RNVC: 2

30 Oct 1984

4730-14-576-7542
Hose To Boss Elbow

145767542
RA.30B08.14: RNCC: 3 | RNVC: 2

10 Jul 2013

4730-14-314-5128

4730-14-368-7404
Quick Disconnect Coupling Half

143687404
77051-34: RNCC: 3 | RNVC: 2
77056: RNCC: 5 | RNVC: 2

10 Mar 1981

4730-14-350-8368
Tube To Boss Straight Adapter

143508368
7062BB1VPT2-30C337: RNCC: 2 | RNVC: 2

12 Jul 1978

4730-14-398-5937
Tube Fitting Brazing Ferrule

143985937
4730AMF3PN250DE20-12: RNCC: 2 | RNVC: 2
GSM164-057F7Z0NED: RNCC: 3 | RNVC: 2
MAT164-0354F7ZONED: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-210-9725
Tube Fitting Clinch Sleeve

142109725
205 20: RNCC: 3 | RNVC: 2
DA20N: RNCC: 3 | RNVC: 2
1A20: RNCC: 3 | RNVC: 2
BE20: RNCC: 3 | RNVC: 2
121215: RNCC: 3 | RNVC: 2
205-20: RNCC: 5 | RNVC: 2
20520: RNCC: 5 | RNVC: 2
97-514: RNCC: 5 | RNVC: 9
AA006499: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-426-7717
Tube Tee

144267717
4730HEING060,3X2,9-42,4X2,6: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-387-4799
Tube To Boss Straight Adapter

143874799
492-15184-0: RNCC: 3 | RNVC: 2
492-15184-0: RNCC: 3 | RNVC: 9

15 Sep 1983

4730-14-225-7494
Bride Pour Tube Lib

142257494
G5605-3: RNCC: 3 | RNVC: 9
062075968: RNCC: 5 | RNVC: 9
75968: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-306-7597
Bride A Zinc

143067597
000MA0833F4REP2DE63-5: RNCC: 3 | RNVC: 2
000MA833F4REP2DE63-5: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-348-8264
Tube To Boss Straight Adapter

143488264
228296: RNCC: 3 | RNVC: 2
228296: RNCC: 5 | RNVC: 2
228296: RNCC: 5 | RNVC: 9

19 Apr 1978

4730-14-431-8432
Bulkhead Hose Connector

144318432
PM1A744100011A1: RNCC: 3 | RNVC: 2
PM1A744100011A1: RNCC: 5 | RNVC: 2

10 May 1989

4730-14-377-1767
Pipe Flange

143771767
888302667: RNCC: 3 | RNVC: 9
888302667: RNCC: 5 | RNVC: 2

17 May 1982

4730-14-304-0422
Tube To Boss Straight Adapter

143040422
R6S8: RNCC: 3 | RNVC: 2
RA6S8: RNCC: 5 | RNVC: 2

4 Jun 1997

4730-14-334-2519
Tube Tee

143342519
GSM163-017F17: RNCC: 3 | RNVC: 2
GSM163-17F17: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-393-6673
Pipeline Flexible Spacer

143936673
NO PRIMARY REF14-393-6673: RNCC: 3 | RNVC: 2
NT1HHDN80PN10: RNCC: 5 | RNVC: 9

7 Jun 1984

4730-14-471-2993
Anchor And Reinforcement Pipe Clamp

144712993
SPAL4025PA-DPAL-AS: RNCC: 3 | RNVC: 2

12 Aug 1994

4730-14-422-0060
Fluid Pressure Line Multiple Connector

144220060
303-141-604-0: RNCC: 3 | RNVC: 2

10 Feb 1988

4730-14-507-5069
Tube Tee

145075069
2-90-07-02: RNCC: 3 | RNVC: 2
0486-00-1/4: RNCC: 5 | RNVC: 2
CUPREX 0486-00-1/4: RNCC: 5 | RNVC: 2
002-900-702: RNCC: 5 | RNVC: 9
S20 486 1/4: RNCC: 5 | RNVC: 9

16 Jul 1998

4730-14-455-2415
Tube Coupling

144552415
Q93WE20S 1/2BSP: RNCC: 3 | RNVC: 2

16 May 1992

4730-14-318-9138
Bulkhead Hose Connector

143189138
121S83-080-03-0: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-263-6376
Tube To Boss Straight Adapter

142636376
7062BC1RCET2-25A52-3: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-314-6072
Sediment Strainer Body

143146072
613-588-600-0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-409-1283
Bride D'attache

144091283
110115: RNCC: 3 | RNVC: 2
20003: RNCC: 5 | RNVC: 2

16 Apr 1986

4730-14-461-0742
Quick Disconnect Coupling Half

144610742
HA75362-57: RNCC: 3 | RNVC: 2
HA7536257: RNCC: 5 | RNVC: 2

23 Feb 1993

4730-14-458-3588
Tube Tee

144583588
LN329-017REP111: RNCC: 3 | RNVC: 2
LN329-017F19DN13,5EQ: RNCC: 5 | RNVC: 2
RAR1578: RNCC: 5 | RNVC: 2

20 Oct 1992

4730-14-327-5464
Quick Disconnect Coupling Half

143275464
E29572A20BZ: RNCC: 2 | RNVC: 2
1000.111: RNCC: 3 | RNVC: 2
9681-02-20X25: RNCC: 3 | RNVC: 2
E29-572DN20: RNCC: 5 | RNVC: 2
0681-02-20X25: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-367-7329

4730-14-289-9906

4730-14-210-6531

4730-14-511-5731
Fluid Pressure Line Multiple Connector

145115731
T282A20T0018: RNCC: 1 | RNVC: 2
282200018000: RNCC: 3 | RNVC: 2

6 Jan 1999

4730-14-235-0891

4730-14-325-3725
Tube To Boss Straight Adapter

143253725
102028-03100: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-569-3997
Quick Disconnect Coupling Half

145693997
FIGURE901M-INOX-DN50: RNCC: 3 | RNVC: 2
FIG.901M-INOX-DN50: RNCC: 5 | RNVC: 2
901M-INOX-DN50: RNCC: 5 | RNVC: 2

12 Sep 2011

4730-14-313-3823
Tube Tee

143133823
NO PRIMARY REF14-313-3823: RNCC: 3 | RNVC: 2
611 1-2 1-4 1-2: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-486-6786
Quick Disconnect Coupling Half

144866786
RBE11-1102/IC/1,5/JV/OD: RNCC: 3 | RNVC: 2
RBE11-1102/OD/IC/1,5/JV: RNCC: 5 | RNVC: 2
91710532: RNCC: 5 | RNVC: 2
91710532: RNCC: 5 | RNVC: 2

2 Apr 1997

4730-14-335-5942
Quick Disconnect Coupling Assembly

143355942
671D10-2: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-547-5277
Tube To Boss Straight Adapter

145475277
RA1M741214502: RNCC: 3 | RNVC: 2

15 Oct 2005

4730-14-520-8007
Hose To Boss Straight Adapter

145208007
0093300780: RNCC: 3 | RNVC: 2
0093300780: RNCC: 3 | RNVC: 2

14 Jun 2000

4730-14-326-9417
Fluid Pressure Line Multiple Connector

143269417
193172: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-334-5203
Tube Coupling

143345203
1040004: RNCC: 3 | RNVC: 9
8099838: RNCC: 5 | RNVC: 2
5000114049: RNCC: 5 | RNVC: 2
5000114049: RNCC: 5 | RNVC: 9
5000114049: RNCC: 6 | RNVC: 9

1 Jun 1976

4730-14-325-9076
Pipe Flange

143259076
AS34TV106REP50: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-202-5555

4730-14-341-6856

4730-14-393-7527
Tube To Boss Straight Adapter

143937527
NO PRIMARY REF14-393-7527: RNCC: 3 | RNVC: 2
0329-1119-200F0LI057: RNCC: 5 | RNVC: 9

23 Jun 1984

4730-14-219-0861
Dispositif De Larga

142190861
GSM543-002F6REP1A7: RNCC: 3 | RNVC: 2
GSM543-002DET1A7: RNCC: 5 | RNVC: 2
GSM543-02DET1A7: RNCC: 5 | RNVC: 2
GSM543-02DET1AU7: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-489-6014
Bobine 1" Galva

144896014
BOBIN00032: RNCC: 3 | RNVC: 2

6 Aug 1997

4730-14-471-7150
Fluid Pressure Line Multiple Connector

144717150
E49-085FIG1TAILLE1: RNCC: 2 | RNVC: 1
2700: RNCC: 3 | RNVC: 9

14 Sep 1994

4730-14-484-9960
Raccord Coude

144849960
U1778-N45-24-241: RNCC: 3 | RNVC: 2

19 Dec 1996

4730-14-307-3881
Coude Orientable

143073881
P2-1509-12-18X150NN: RNCC: 3 | RNVC: 2
1509-12-18X150NN: RNCC: 3 | RNVC: 2
C0RSA12X18-150N: RNCC: 3 | RNVC: 2
75A12-18X150: RNCC: 3 | RNVC: 2
0024287058: RNCC: 5 | RNVC: 2
0024287058: RNCC: 5 | RNVC: 9
24287058: RNCC: 5 | RNVC: 9
061252061: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-414-8356
Crepine

144148356
CR44327-051: RNCC: 3 | RNVC: 2
CR50588-01REP2-3: RNCC: 5 | RNVC: 2

12 Mar 1987

4730-14-461-3338
Tube Coupling Assembly

144613338
A.GEV-10S-NPT-1/4: RNCC: 3 | RNVC: 2

8 Mar 1993

4730-14-558-6353
Tube To Boss Straight Adapter

145586353
RM5685-0-01: RNCC: 3 | RNVC: 2

21 Oct 2008

4730-14-426-7697
Tube Tee

144267697
4730HEING048,3X3,6-26,9X2: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-484-6696
Hydraulic System Accessories Manifold

144846696
29445209: RNCC: 3 | RNVC: 2

28 Nov 1996

4730-14-416-5079
Tube To Boss Straight Adapter

144165079
4730AB4.4DN20NU: RNCC: 2 | RNVC: 2
LV117-NS2008S: RNCC: 3 | RNVC: 2
84052021NU: RNCC: 5 | RNVC: 2

10 Jun 1987

4730-14-395-3715
Solder Type Tube Fitting Plug

143953715
N0162F22A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-409-0468
Hose To Boss Straight Adapter

144090468
3071066: RNCC: 3 | RNVC: 2
3071066: RNCC: 3 | RNVC: 2

16 Apr 1986

4730-14-535-4666
Lubrication Fitting

145354666
5005097023: RNCC: 3 | RNVC: 2

27 May 2003

4730-14-481-4068
Fluid-Emulsion Spray Nozzle

144814068
152000-617092B-REP.41: RNCC: 3 | RNVC: 2

4 May 1996

4730-14-525-4750
Hose To Grooved Clamp Coupling Straight Adapter

145254750
8C7306: RNCC: 3 | RNVC: 2

6 Jun 2001

4730-14-533-2341
Fluid Pressure Line Multiple Connector

145332341
H109498: RNCC: 3 | RNVC: 2

29 Jan 2003

4730-14-516-2018
Lubrication Fitting

145162018
0008971: RNCC: 3 | RNVC: 2

15 Sep 1999

4730-14-362-4970
Tube Coupling

143624970
002852282P: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-367-0349

4730-14-578-6847
Hose Plug

145786847
ISO6149-4-PLEH-M20-P2A: RNCC: 2 | RNVC: 2

19 Dec 2013

4730-14-263-9600
Bride De Verriere

142639600
330A25-1136-20: RNCC: 3 | RNVC: 2
330A25-1136-2000: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-457-9197
Quick Disconnect Coupling Half

144579197
RBO06-1102/IC: RNCC: 3 | RNVC: 2
N00713492A: RNCC: 5 | RNVC: 2

1 Oct 1992

4730-14-540-4722
Tube Coupling

145404722
128-66-101: RNCC: 3 | RNVC: 2

1 Apr 2004

4730-14-031-6552

4730-14-314-5968
Sediment Strainer Element

143145968
485-102-455-0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-410-2283
Quick Disconnect Coupling Assembly

144102283
MCR2-6902: RNCC: 3 | RNVC: 2
MCR02-6902: RNCC: 5 | RNVC: 2

18 Jun 1986

4730-14-438-7401
Pipe Joint Welding Ring

144387401
LN324-079REP03: RNCC: 3 | RNVC: 2
LN324-079F6REP03: RNCC: 5 | RNVC: 2

3 Apr 1990

4730-14-477-5192
Rapid Action Coupled Pipe Cap

144775192
9959997: RNCC: 3 | RNVC: 2
9-95-99-97: RNCC: 5 | RNVC: 2

7 Sep 1995

4730-14-276-2077
Pipe-Tube Escutcheon

142762077
6784-1EB8: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-429-3980
Raccords Elem Suppo

144293980
NO PRIMARY REF14-429-3980: RNCC: 3 | RNVC: 2
148131800: RNCC: 5 | RNVC: 2
14813-18-00: RNCC: 5 | RNVC: 9
148131800: RNCC: 5 | RNVC: 9
148131800: RNCC: 5 | RNVC: 9

20 Jan 1989

4730-14-446-5954
Quick Disconnect Coupling Assembly

144465954
HX 050 3100 5/8INCH-BU: RNCC: 3 | RNVC: 2

2 Apr 1991

4730-14-403-0390
Quick Disconnect Coupling Half

144030390
RBE06-1151: RNCC: 3 | RNVC: 2
91607019: RNCC: 5 | RNVC: 2
RBE6-1151: RNCC: 5 | RNVC: 2

25 Jul 1985

4730-14-297-8968
Bloc De Derivation

142978968
411MA0162FB18: RNCC: 3 | RNVC: 2
411MA162FB18: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-337-6583
Pipe Flange

143376583
1264P32-1: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-221-7032

4730-14-389-2978
Bride Avant

143892978
2-24772: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-576-7816
Hose Tee

145767816
2410 710 S: RNCC: 3 | RNVC: 2

12 Jul 2013

4730-14-270-5267

4730-14-263-6340
Tube Coupling

142636340
7062BA1RPET2-30A52-3: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-283-7210
Bride Porte-Injecte

142837210
NO PRIMARY REF14-283-7210: RNCC: 3 | RNVC: 2
10299-1: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-477-7023
Tube-Hose Fitting Compression Sleeve

144777023
54250-024-1: RNCC: 3 | RNVC: 2
54250-024-1: RNCC: 5 | RNVC: 9

20 Sep 1995

4730-14-562-5580
Pipeline Flexible Spacer

145625580
0429068: RNCC: 3 | RNVC: 2
A1/050/KR320-WG/E/AV: RNCC: 3 | RNVC: 2

3 Nov 2009

4730-14-301-0141
Fluid Pressure Line Multiple Connector

143010141
121E71-212-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-320-2134
Embout Refoulement

143202134
AD4-59059: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-427-8929
Tube To Boss Straight Adapter

144278929
G25S71X: RNCC: 3 | RNVC: 2
G25S71X: RNCC: 3 | RNVC: 9
XG25-PS/1.4571: RNCC: 5 | RNVC: 9

19 Nov 1988

4730-14-556-5706
Hose Coupling

145565706
EG10-1/2B: RNCC: 3 | RNVC: 2

25 Mar 2008

4730-14-319-5053
Lubrication Fitting

143195053
7005-8X125: RNCC: 3 | RNVC: 2
ALG7005-8X125: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-405-5850
Quick Disconnect Coupling Half

144055850
RBE06-1153/OD/IC/FB: RNCC: 3 | RNVC: 2
RBE06-11530DICFB: RNCC: 5 | RNVC: 2

4 Dec 1985

4730-14-324-2554
Embout De Raccordem

143242554
330A52-0105-20: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-373-7297
Tube To Boss Straight Adapter

143737297
32-140-70: RNCC: 3 | RNVC: 9

13 Nov 1981

4730-14-429-5495
Quick Disconnect Coupling Half

144295495
RCS06-1151: RNCC: 3 | RNVC: 2
RCS06.1151: RNCC: 5 | RNVC: 2
8035510P00: RNCC: 5 | RNVC: 2

30 Jan 1989

4730-14-350-8365
Tube To Boss Straight Adapter

143508365
7062BB1VPT2-14C337: RNCC: 2 | RNVC: 2

12 Jul 1978

4730-14-432-4171
Pipe Elbow Assembly

144324171
BN324-581F3REPD-90DEG: RNCC: 2 | RNVC: 2
RAR1420: RNCC: 5 | RNVC: 2

12 Jun 1989

4730-14-248-3446
Calotte

142483446
3200-14: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-470-8413
Distributio Raccord

144708413
94MS144: RNCC: 3 | RNVC: 2

8 Jul 1994

4730-14-290-8056

4730-14-338-2514
Tube Fitting Brazing Ferrule

143382514
U1198F5-219-1UE8: RNCC: 2 | RNVC: 2
CN11: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-494-0824
Union

144940824
NO PRIMARY REF14-494-0824: RNCC: 3 | RNVC: 2
5005430062: RNCC: 5 | RNVC: 9
F300 0T 015 3837: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-365-9828

4730-14-365-9825

4730-14-548-8557
Tube Coupling

145488557
0298721120: RNCC: 3 | RNVC: 2

20 Feb 2006

4730-14-277-6555
Pipe Flange

142776555
6784-1CD20-6: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-524-4425
Quick Disconnect Coupling Half

145244425
RBE06-7810/IC/4,5/JE: RNCC: 3 | RNVC: 2
91711674: RNCC: 5 | RNVC: 2

20 Mar 2001

4730-14-042-0196
Tube To Boss Straight Adapter

140420196
121E52-468-00-0: RNCC: 3 | RNVC: 2

7 Oct 1976

4730-14-333-5252
Barillet A 6 Voies

143335252
GSM163-024F5: RNCC: 3 | RNVC: 2
GSM163-24F5: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-303-1930

4730-14-374-8015
Embase Femelle

143748015
NO PRIMARY REF14-374-8015: RNCC: 3 | RNVC: 2
29304-343: RNCC: 5 | RNVC: 9

30 Jan 1982

4730-14-428-5855
Equipe Flasque

144285855
SBE1043: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-262-5740
Flotteur Complet

142625740
6801: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-238-1775

4730-14-266-8280

4730-14-564-3595
Bulkhead Hose Connector

145643595
MDS81F179: RNCC: 3 | RNVC: 2

26 Apr 2010

4730-14-398-0668
Cylindre Regulateur

143980668
0025141134: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-356-6627

4730-14-292-2033

4730-14-365-2875

4730-14-422-1123
Quick Disconnect Coupling Half

144221123
RBE06-6906/IC: RNCC: 3 | RNVC: 2
RBE06-6906IC: RNCC: 5 | RNVC: 2

23 Feb 1988

4730-14-450-4060
Quick Disconnect Coupling Assembly

144504060
RID06-6806: RNCC: 3 | RNVC: 2
RID6-6806: RNCC: 5 | RNVC: 2

4 Oct 1991

4730-14-415-3057
Pipe Flange

144153057
B52-14A1-02DN65: RNCC: 3 | RNVC: 2
52716076: RNCC: 5 | RNVC: 2

29 Apr 1987

4730-14-473-8775
Tube Tee

144738775
920230: RNCC: 3 | RNVC: 2
PLC3749: RNCC: 5 | RNVC: 2
Q158090R20DS1/2BSPK: RNCC: 5 | RNVC: 2

12 Jan 1995

4730-14-569-4001
Quick Disconnect Plug

145694001
FIGURE902-INOX-DN45: RNCC: 3 | RNVC: 2
902-INOX-DN45: RNCC: 5 | RNVC: 2
FIG.902-INOX-DN45: RNCC: 5 | RNVC: 2

12 Sep 2011

4730-14-222-6542
Tube Fitting Brazing Ferrule

142226542
GSM1297F1AF1BTABLEAU2D1-14I8: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-438-0650
Pipe To Tube Straight Adapter

144380650
GF01511: RNCC: 3 | RNVC: 2
PA36-14X150: RNCC: 5 | RNVC: 2
GF01511: RNCC: 5 | RNVC: 2
GF01511: RNCC: 5 | RNVC: 9
GF01511: RNCC: 5 | RNVC: 9
01-01-00030: RNCC: 5 | RNVC: 9

7 Mar 1990

4730-14-431-1539
Pipe Flange

144311539
6784-1DR28A: RNCC: 3 | RNVC: 9

10 Apr 1989

4730-14-367-9750
Quick Disconnect Plug

143679750
RBE03-8500U: RNCC: 3 | RNVC: 2
RBE3-8500U: RNCC: 5 | RNVC: 2
85-691-3485: RNCC: 6 | RNVC: 9

19 Jan 1981

4730-14-423-4577
Pipe Flange

144234577
UA50088006PN150-11D1SDN25: RNCC: 2 | RNVC: 2
4730HCPN150DN02511D1S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-286-2332
Tube To Boss Straight Adapter

142862332
G12-42-40-49: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-311-9450
Tube Tee

143119450
16316238: RNCC: 3 | RNVC: 2
16316238: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-393-5623
Ensemble Raccord

143935623
MN7062RBF2/3REP1: RNCC: 3 | RNVC: 9
MN7062RBF2-3REP1: RNCC: 5 | RNVC: 9

7 Apr 1984

4730-14-408-5306
Fluid Passage Bolt

144085306
9418400058: RNCC: 3 | RNVC: 2
9418-40-00-58: RNCC: 5 | RNVC: 2

2 Apr 1986

4730-14-505-4766
Tube To Hose Straight Adapter

145054766
3101-10-13: RNCC: 3 | RNVC: 2
31011013: RNCC: 3 | RNVC: 2
222-9247: RNCC: 5 | RNVC: 2

18 Mar 1998

4730-14-312-2461
Fluid Pressure Line Multiple Connector

143122461
330A54-1183-00: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-534-5413
Quick Disconnect Coupling Half

145345413
RBE08.2103: RNCC: 3 | RNVC: 2
RBE082103: RNCC: 5 | RNVC: 2
RBE08-2103: RNCC: 5 | RNVC: 2
RBE082103: RNCC: 5 | RNVC: 2

26 Mar 2003

4730-14-375-5036
Tube To Boss Straight Adapter

143755036
RV6E12-3E12DEAL: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-403-4302

4730-14-385-7075
Tube Coupling

143857075
270C10: RNCC: 3 | RNVC: 9

26 Jul 1983

4730-14-386-0232
Tube To Boss Straight Adapter

143860232
TID14844: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-411-7074
Hose To Boss Straight Adapter

144117074
0500305: RNCC: 3 | RNVC: 2
FOE0500305: RNCC: 5 | RNVC: 9

27 Aug 1986

4730-14-562-1941
Hose Tee

145621941
3104 10 08: RNCC: 3 | RNVC: 2
FS0002476: RNCC: 6 | RNVC: 9

6 Oct 2009

4730-14-459-6015
Tube Union

144596015
2-24799: RNCC: 3 | RNVC: 2
4130.800: RNCC: 3 | RNVC: 2
Q88-G16S: RNCC: 5 | RNVC: 2
20322219: RNCC: 5 | RNVC: 2
91392414: RNCC: 5 | RNVC: 2

10 Dec 1992

4730-14-387-8880
Tube Tee

143878880
788.B.06.08.06T: RNCC: 3 | RNVC: 2
788 B 06 08 06T: RNCC: 5 | RNVC: 2
788B06 08 06T: RNCC: 5 | RNVC: 2
788B06-08-06T: RNCC: 5 | RNVC: 2
788B060806T: RNCC: 5 | RNVC: 2
74788B060806T: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-373-0972
Bulkhead Hose Connector

143730972
0294457500: RNCC: 3 | RNVC: 2
302-402-001-0: RNCC: 5 | RNVC: 2

21 Sep 1981

4730-14-485-6335
Tube To Boss Straight Adapter

144856335
UFSI8-1-4BGS: RNCC: 3 | RNVC: 2
UFSI8-1-4NPT: RNCC: 5 | RNVC: 2
8-63-M4-SS: RNCC: 5 | RNVC: 9

6 Feb 1997

4730-14-425-2935
Tube To Boss Straight Adapter

144252935
15.002-6-10: RNCC: 3 | RNVC: 2
378059: RNCC: 5 | RNVC: 9

30 Jun 1988

4730-14-234-9385
Col De Cygne Pour B

142349385
7062RBF2-3-100A42: RNCC: 3 | RNVC: 9

1 Jan 1967

4730-14-224-3913
Tube Fitting Brazing Ferrule

142243913
GSM163-002F7-30-1-25: RNCC: 3 | RNVC: 2
GSM163-02F7-30-1-25: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-413-5836
Embout A Souder

144135836
LL011-CC14S: RNCC: 3 | RNVC: 2
88771400: RNCC: 5 | RNVC: 2

17 Dec 1986

4730-14-559-3747
Tube Elbow

145593747
W25SA3CX: RNCC: 3 | RNVC: 2

22 Dec 2008

4730-14-224-4786

4730-14-268-1094

4730-14-326-8608
Tube Coupling Assembly

143268608
3601PS32A: RNCC: 3 | RNVC: 2
3-3601PS32A: RNCC: 5 | RNVC: 9
3-3601PS32A08L: RNCC: 5 | RNVC: 9
3601PS32A: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-392-7404
Sediment Strainer Element

143927404
NO PRIMARY REF14-392-7404: RNCC: 3 | RNVC: 2
9412212: RNCC: 5 | RNVC: 2
2230160: RNCC: 5 | RNVC: 9

7 Apr 1984

4730-14-373-8197
Deprimogene

143738197
BN324-511F3/7: RNCC: 3 | RNVC: 2

13 Nov 1981

4730-14-339-9019
Tube Tee

143399019
0-3951S20X16X20APAS1: RNCC: 3 | RNVC: 2
0-3951S20X16X20APAS1: RNCC: 5 | RNVC: 9
85-688-9440: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-14-476-1628
Tube Tee

144761628
1TR6X8X6NU: RNCC: 3 | RNVC: 2
1 TR 06 08 06 NU: RNCC: 5 | RNVC: 2
P4-1TR6X8X6NU: RNCC: 5 | RNVC: 2

24 May 1995

4730-14-506-6703
Quick Disconnect Coupling Half

145066703
2HK-LL2-K16/73992: RNCC: 3 | RNVC: 9
2HK-LL2-K16: RNCC: 5 | RNVC: 2

6 May 1998

4730-14-362-4099
Tube To Boss Straight Adapter

143624099
9159202758NU: RNCC: 3 | RNVC: 2
A22-20-21-27CBNU: RNCC: 5 | RNVC: 9

19 Mar 1980

4730-14-577-5924
Fluid-Emulsion Spray Nozzle

145775924
NO PRIMARY REF 14-577-5924: RNCC: 3 | RNVC: 2
C500530: RNCC: 5 | RNVC: 2

26 Sep 2013

4730-14-567-2415
Tube Elbow

145672415
ASNA3764-1008: RNCC: 1 | RNVC: 2
PE20212J-1008: RNCC: 3 | RNVC: 2
ASNA3764-1008: RNCC: 5 | RNVC: 2

24 Feb 2011

4730-14-564-3895
Tube Elbow

145643895
A231004000333: RNCC: 3 | RNVC: 2
221EB550: RNCC: 5 | RNVC: 2

27 Apr 2010

4730-14-434-7147
Adaptateur Bride

144347147
BN329515D2DN20AC: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-283-6107

4730-14-442-6853
Tube To Boss Straight Adapter

144426853
3057-001-0: RNCC: 3 | RNVC: 2

24 Oct 1990

4730-14-249-8842
Swivel Retaining Pipe Flange

142498842
502-302-024-0: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-576-9218
Tube To Gas Fitting Straight Adapter

145769218
53010050: RNCC: 3 | RNVC: 2
ART53010050: RNCC: 3 | RNVC: 2
110390F: RNCC: 5 | RNVC: 2
Y00014188: RNCC: 5 | RNVC: 2

23 Jul 2013

4730-14-499-5314
Quick Disconnect Reducer

144995314
25668126: RNCC: 3 | RNVC: 2
2-566812-6: RNCC: 5 | RNVC: 2
F300 0T 023 2222: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-408-4491
Tube To Boss Straight Adapter

144084491
LW114-NC1404S: RNCC: 3 | RNVC: 2
8401141347NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-484-3571
Tube To Boss Straight Adapter

144843571
AI ISO 10X14.150: RNCC: 3 | RNVC: 9
91597317: RNCC: 5 | RNVC: 2
91597317: RNCC: 5 | RNVC: 2

14 Nov 1996

4730-14-484-7897
Adapter And Flange Assembly

144847897
P502363: RNCC: 3 | RNVC: 2

5 Dec 1996

4730-14-457-4360
Fluid Passage Bolt

144574360
16661704: RNCC: 3 | RNVC: 2

3 Sep 1992

4730-14-527-3722
Tube To Boss Straight Adapter

145273722
H102874S: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-435-1650
Quick Disconnect Plug

144351650
2-50068: RNCC: 3 | RNVC: 2

24 Oct 1989

4730-14-385-7089
Tube To Boss Straight Adapter

143857089
243 3-4X3-8: RNCC: 3 | RNVC: 9

26 Jul 1983

4730-14-543-8842
Quick-Disconnect Nipple

145438842
P-R064: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-479-1814
Hose Fitting Swaging Socket

144791814
FI 2.83.08.01: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-301-4669

4730-14-484-0387
Quick Disconnect Coupling Half

144840387
HA05332-35: RNCC: 3 | RNVC: 2
HA0533235: RNCC: 5 | RNVC: 2

17 Oct 1996

4730-14-265-2375
Tube Fitting Clinch Sleeve

142652375
605-45: RNCC: 3 | RNVC: 2
DL45N: RNCC: 3 | RNVC: 2
1L45: RNCC: 3 | RNVC: 2
BEL45: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-443-2836
Tube-Hose Adapter Body

144432836
IB-D/DIV50: RNCC: 3 | RNVC: 2
IB-D: RNCC: 5 | RNVC: 2

14 Nov 1990

4730-14-442-4133
Return Tube Bend

144424133
895V35053A: RNCC: 3 | RNVC: 2
CMF16X150-16-17F135DEG: RNCC: 5 | RNVC: 2
D14378: RNCC: 5 | RNVC: 9

16 Oct 1990

4730-14-457-1014
Tube To Boss Straight Adapter

144571014
0109 182 000: RNCC: 3 | RNVC: 2
UMA 12-22X150L: RNCC: 5 | RNVC: 2
M4ZS460D8926: RNCC: 5 | RNVC: 2

6 Aug 1992

4730-14-457-6496
Bulkhead Hose Connector

144576496
51-615DC: RNCC: 3 | RNVC: 2
85-694-8920: RNCC: 6 | RNVC: 9

10 Sep 1992

4730-14-286-3142
Tube Tee

142863142
Q1-57-25NN: RNCC: 3 | RNVC: 2
TK25N: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-230-0476
Quick Disconnect Wye

142300476
23-001-42: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-509-1565
Tube To Boss Straight Adapter

145091565
KQS06-U01: RNCC: 3 | RNVC: 2
ND1663: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-556-7050
Hose To Boss Straight Adapter

145567050
GA47616-110: RNCC: 3 | RNVC: 2

3 Apr 2008

4730-14-222-7302
Tube Tee

142227302
GSM1297FE3-22TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-556-5711
Tube Reducer

145565711
712431-16: RNCC: 3 | RNVC: 2

25 Mar 2008

4730-14-213-5719
Tube-Hose Fitting Compression Sleeve

142135719
6899-5706: RNCC: 3 | RNVC: 9

1 Jan 1964

4730-14-430-1304
Quick Disconnect Coupling Half

144301304
RCS08-1103: RNCC: 3 | RNVC: 2

3 Mar 1989

4730-14-544-2147
Pipeline Flexible Spacer

145442147
13130600-00: RNCC: 3 | RNVC: 2

11 Jan 2005

4730-14-424-5538
Quick Disconnect Coupling Half

144245538
RBA06-1806/L/VS: RNCC: 3 | RNVC: 2
RBA06-1806/LVS: RNCC: 5 | RNVC: 2

27 May 1988

4730-14-031-6483
Embout Reduction A

140316483
Q5-5SKR38-20X4-5: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-286-3145
Racc Uni Trav Clois

142863145
Q1-506-25: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-319-9915
Tube To Boss Straight Adapter

143199915
05 114 08 10+05 010 10: RNCC: 3 | RNVC: 2
412-8-10: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-563-3295
Quick Disconnect Coupling Half

145633295
102740: RNCC: 3 | RNVC: 2
3SK0294-102740: RNCC: 5 | RNVC: 2

26 Jan 2010

4730-14-285-3829
Tube To Boss Straight Adapter

142853829
90621-1: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-313-1134
Quick Disconnect Coupling Half

143131134
QSL15-5: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-558-6405
Air Trap

145586405
26 300 103: RNCC: 3 | RNVC: 2

21 Oct 2008

4730-14-286-9837

4730-14-325-5958

4730-14-219-4177

4730-14-260-8357
Quick Disconnect Coupling Half

142608357
U110-8-1-5: RNCC: 3 | RNVC: 2

30 Jun 1999

4730-14-375-5035
Tube To Boss Straight Adapter

143755035
RV6E10-3E10DEAL: RNCC: 3 | RNVC: 2
8603-356: RNCC: 5 | RNVC: 9

26 Feb 1982

4730-14-455-3797
Quick Disconnect Coupling Half

144553797
RBE06-7808IA9JV: RNCC: 3 | RNVC: 2
91727018: RNCC: 5 | RNVC: 2

21 May 1992

4730-14-295-9624
Tube Fitting Clinch Sleeve

142959624
91240800: RNCC: 3 | RNVC: 2
9124-08-00: RNCC: 5 | RNVC: 2
VDP5016: RNCC: 5 | RNVC: 2
030313: RNCC: 5 | RNVC: 9
AB8: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-394-2696
Raccord Vis Creuse

143942696
D8286DIN7644-8AV: RNCC: 3 | RNVC: 2
DIN7644-8AV: RNCC: 5 | RNVC: 2

14 Jul 1984

4730-14-499-4962
Tube To Boss Swivel Joint

144994962
DSVW12SR3-8INCH-NPT: RNCC: 3 | RNVC: 2
DSVW12SR3-8INCHNPT: RNCC: 3 | RNVC: 2
F300 0T 022 9114: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-343-5661
Tube Tee

143435661
GSM523-026F6: RNCC: 3 | RNVC: 2
GSM523-26F6: RNCC: 5 | RNVC: 2

16 Jun 1977

4730-14-481-4780
Tube Coupling

144814780
853-911-046-0: RNCC: 3 | RNVC: 2

8 May 1996

4730-14-387-8513
Tube To Boss Straight Adapter

143878513
NO PRIMARY REF14-387-8513: RNCC: 3 | RNVC: 2
0026-127DN25: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-449-5405
Tube Tee

144495405
TE EGAL NU 2353S13,5: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-506-4464
Tube To Boss Straight Adapter

145064464
16-042-31: RNCC: 3 | RNVC: 2
1604.231: RNCC: 3 | RNVC: 2
CAE00770: RNCC: 5 | RNVC: 2

29 Apr 1998

4730-14-370-2562
Bossa Raccord Coude

143702562
303-964-101-0: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-460-2833
Tournant Embout

144602833
20642-12-12: RNCC: 3 | RNVC: 2
20642-12-19,1: RNCC: 5 | RNVC: 9
20642-12-19-1: RNCC: 5 | RNVC: 9

21 Jan 1993

4730-14-339-9755
Bloc Mobile Tiroir

143399755
GSM525-002F28: RNCC: 3 | RNVC: 2
GSM525-09F8: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-231-5767
Tube Coupling

142315767
EN10242-M2R-L-3/4-FE-A: RNCC: 2 | RNVC: 2
770271105: RNCC: 3 | RNVC: 2
271 3-4: RNCC: 5 | RNVC: 2
770 271 105: RNCC: 5 | RNVC: 2
4 3-4: RNCC: 5 | RNVC: 9
E29801M5E: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-505-3408
Reducteur Pour Tube

4730-14-449-5481
Tube Union

144495481
RACCORD SOUD PAR BB L17,2: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-041-2579
Tube Union

140412579
1204-25-21-27CYL: RNCC: 3 | RNVC: 2
0RSA25X20-27N: RNCC: 3 | RNVC: 2
5A25-21-27CYL: RNCC: 3 | RNVC: 2
121596: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-375-2245
Tube To Boss Straight Adapter

143752245
6817417-001: RNCC: 3 | RNVC: 2

26 Feb 1982

Load More Results