What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 173 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 173 of 185

4730-14-521-5245
Threaded Tube Fitting Plug

145215245
4M720052: RNCC: 3 | RNVC: 2

9 Aug 2000

4730-14-288-4415
Tube To Boss Straight Adapter

142884415
12: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-525-4787
Hose To Grooved Clamp Coupling Straight Adapter

145254787
7700017017: RNCC: 3 | RNVC: 2

6 Jun 2001

4730-14-457-3571
Quick Disconnect Coupling Half

144573571
RBE03-6806-0S: RNCC: 3 | RNVC: 2
91637028: RNCC: 5 | RNVC: 2

27 Aug 1992

4730-14-427-5059
Fluid Pressure Line Multiple Connector

144275059
NO PRIMARY REF14-427-5059: RNCC: 3 | RNVC: 2
00030: RNCC: 5 | RNVC: 9

20 Oct 1988

4730-14-435-3157
Fluid Passage Bolt

144353157
NO PRIMARY REF14-435-3157: RNCC: 3 | RNVC: 2
10D8079E-REP5: RNCC: 5 | RNVC: 9
U2378: RNCC: 5 | RNVC: 9

6 Nov 1989

4730-14-341-1497
Fluid Pressure Line Multiple Connector

143411497
5171565400: RNCC: 3 | RNVC: 2
R013005-01: RNCC: 5 | RNVC: 2
715654: RNCC: 5 | RNVC: 2

16 Mar 1977

4730-14-453-9509
Tube To Hose Straight Adapter

144539509
LN324-100-11-082DN100: RNCC: 3 | RNVC: 2
RAB9309: RNCC: 5 | RNVC: 2

17 Mar 1992

4730-14-319-9911
Tube To Boss Straight Adapter

143199911
05 111 10 10+05 010 10: RNCC: 3 | RNVC: 2
411-10-10: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-414-8931
Pipe Expansion Joint

144148931
NO PRIMARY REF14-414-8931: RNCC: 3 | RNVC: 2
D20428: RNCC: 5 | RNVC: 9

18 Mar 1987

4730-14-415-7656
Fluid Passage Bolt

144157656
NO PRIMARY REF14-415-7656: RNCC: 3 | RNVC: 2
240480100: RNCC: 5 | RNVC: 9

18 May 1987

4730-14-548-7927
Lubrication Fitting Adapter

145487927
500028REP72: RNCC: 3 | RNVC: 2

13 Feb 2006

4730-14-506-0348
Flange To Tube Elbow

145060348
RA1M521102142: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-443-3616
Tube Coupling

144433616
0520414: RNCC: 3 | RNVC: 2

19 Nov 1990

4730-14-403-9481
Tube To Boss Straight Adapter

144039481
620438: RNCC: 3 | RNVC: 2

11 Sep 1985

4730-14-500-2874
Quick Disconnect Coupling Half

145002874
NC0069290: RNCC: 3 | RNVC: 2
F300 0T 024 2941: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-272-1772
Sediment Strainer Element

142721772
2299TAMIS: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-487-5456
Bulkhead Hose Connector

144875456
RA1M521404230: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-254-8173
Fluid Passage Bolt

142548173
271483: RNCC: 3 | RNVC: 2
271483: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-262-1718
Pipe Flange

142621718
7062DL1F1M76-5-14CD2-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-389-5152
Fluid Pressure Line Multiple Connector

143895152
365A75-2655-21: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-388-4746
Tube To Boss Straight Adapter

143884746
UMAG21X24-150N: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-542-2409
Fluid Passage Bolt

145422409
700643923: RNCC: 3 | RNVC: 2
700643923: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-228-9142
Tube Coupling Inverted Nut

142289142
0571351: RNCC: 3 | RNVC: 2
1240-156: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-332-0657
Bulkhead Hose Connector

143320657
R7412Z22: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-519-4297
Tube Coupling

145194297
E63702000121: RNCC: 3 | RNVC: 2

17 Mar 2000

4730-14-402-6023
Fluid Pressure Line Multiple Connector

144026023
400557: RNCC: 3 | RNVC: 2
BGE400557: RNCC: 5 | RNVC: 2
MAF0001006318: RNCC: 6 | RNVC: 9

19 Jul 1985

4730-14-434-8810
Sediment Strainer Element

144348810
60334: RNCC: 3 | RNVC: 2

6 Oct 1989

4730-14-350-1354
Bulkhead Hose Connector

143501354
9116101066: RNCC: 3 | RNVC: 2

14 Jun 1978

4730-14-538-3140
Return Tube Bend

145383140
NGM0010035824008: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-393-1257
Tube To Boss Straight Adapter

143931257
02140022200: RNCC: 3 | RNVC: 2
021400222: RNCC: 5 | RNVC: 2

12 Apr 1984

4730-14-520-8036
Hose To Boss Straight Adapter

145208036
0093758440: RNCC: 3 | RNVC: 2
0093758440: RNCC: 3 | RNVC: 2

14 Jun 2000

4730-14-368-8801
Pipe Flange

143688801
CMT20E4003DN80REP5BRONZE: RNCC: 3 | RNVC: 2
CMT20E4003DN80REPBBR0NZE: RNCC: 5 | RNVC: 2

10 Mar 1981

4730-14-520-7015
Tube To Boss Straight Adapter

145207015
8818339000: RNCC: 3 | RNVC: 2

31 May 2000

4730-14-449-5381
Tube Union

144495381
UNION MALE SOUD 2353L17,2: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-374-3475
Sediment Strainer Element

143743475
54250-044-1: RNCC: 3 | RNVC: 2
1-1206AA02-03: RNCC: 5 | RNVC: 9
54250-044-1: RNCC: 5 | RNVC: 9

8 Dec 1981

4730-14-450-7461
Tube Tee

144507461
4730HEINGCH048,3X7,1-33,7X4,5: RNCC: 2 | RNVC: 2

21 Oct 1991

4730-14-365-6569
Tube-Hose Fitting Compression Sleeve

143656569
205-15: RNCC: 3 | RNVC: 2

8 Oct 1980

4730-14-441-7211
Pipe Clamp Coupling

144417211
RTN5-20: RNCC: 3 | RNVC: 2

12 Sep 1990

4730-14-358-2809
Tube To Boss Straight Adapter

143582809
105330-05: RNCC: 3 | RNVC: 2
105330-05: RNCC: 5 | RNVC: 9

13 Aug 1979

4730-14-032-1528
Tube Fitting Clinch Sleeve

140321528
Q1-5D10LS: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-365-1514
Pipe Flange

143651514
969618: RNCC: 3 | RNVC: 2
969618: RNCC: 5 | RNVC: 9

2 Sep 1980

4730-14-516-1949
Tube To Boss Straight Adapter

145161949
9606895980: RNCC: 3 | RNVC: 2
0015075: RNCC: 3 | RNVC: 2

15 Sep 1999

4730-14-382-6958
Bulkhead Hose Connector

143826958
525025: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-542-3267
Self-Sealing Coupling Half

145423267
1762200: RNCC: 3 | RNVC: 2

8 Jul 2004

4730-14-366-5047
Tube To Boss Straight Adapter

143665047
NO PRIMARY REF14-366-5047: RNCC: 3 | RNVC: 2
Z/46086: RNCC: 5 | RNVC: 9
Z46086: RNCC: 5 | RNVC: 9

20 Nov 1980

4730-14-498-4898
Tube To Boss Straight Adapter

144984898
91971351: RNCC: 3 | RNVC: 2
P4-109-10NU: RNCC: 5 | RNVC: 9
F300 0T 005 3134: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-395-2206
Quick Disconnect Coupling Half

143952206
RBE03-7806/IC: RNCC: 3 | RNVC: 2
RBE03-7806IC: RNCC: 5 | RNVC: 2

2 Oct 1984

4730-14-505-1744
Fluid Pressure Line Multiple Connector

145051744
1977D18-02: RNCC: 3 | RNVC: 2

11 Mar 1998

4730-14-429-2904
Bulkhead Hose Connector

144292904
F530-07-28: RNCC: 3 | RNVC: 2

11 Jan 1989

4730-14-331-7886
Tube To Boss Straight Adapter

143317886
59274: RNCC: 3 | RNVC: 2
85-686-7910: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-256-0575
Raccord Vabco

142560575
UML14-18X1-5: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-216-3679
Bouchon Special

142163679
611-106-083-1: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-278-1758
Tube To Boss Straight Adapter

142781758
UMA10X8-13N: RNCC: 3 | RNVC: 2
4A10-8-13CYL: RNCC: 3 | RNVC: 2
4A10/8-13CYL: RNCC: 3 | RNVC: 2
M10-13: RNCC: 3 | RNVC: 2
12-10-8-13CYL: RNCC: 3 | RNVC: 2
202425814050: RNCC: 5 | RNVC: 2
121512: RNCC: 5 | RNVC: 2
98B12190003: RNCC: 5 | RNVC: 2
99-621-10-129-1: RNCC: 5 | RNVC: 2
99621101291: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-425-5277
Intermediai Raccord

144255277
BB050400: RNCC: 3 | RNVC: 2
BB0504: RNCC: 5 | RNVC: 2

7 Jul 1988

4730-14-379-3127
Corps De Decharge

143793127
15409: RNCC: 3 | RNVC: 2

6 Sep 1982

4730-14-339-8949

4730-14-240-2575
Mamelon Special

142402575
152309: RNCC: 3 | RNVC: 2
710367: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-202-6522

4730-14-333-7548

4730-14-291-0115

4730-14-295-0276
Diaphragme Special

142950276
AS34TE2BREP8: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-273-5315

4730-14-365-8980

4730-14-311-5842

4730-14-242-7975
Tube Tee

142427975
NG40901-4APL21N0M1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-367-9811
Self-Sealing Coupling Half

143679811
714E370: RNCC: 3 | RNVC: 2
85-691-3014: RNCC: 6 | RNVC: 9

19 Jan 1981

4730-14-031-1507
Tube To Boss Straight Adapter

140311507
9141148051: RNCC: 3 | RNVC: 2
9441148058: RNCC: 5 | RNVC: 2
VDP4665: RNCC: 5 | RNVC: 2
A1P14-20-150-51: RNCC: 5 | RNVC: 9

14 Jun 1980

4730-14-562-5583
Pipeline Flexible Spacer

145625583
0429070: RNCC: 3 | RNVC: 2
A1/080/KR320-WG/E/AV: RNCC: 3 | RNVC: 2

3 Nov 2009

4730-14-493-0789
Union

144930789
NO PRIMARY REF14-493-0789: RNCC: 3 | RNVC: 2
568196: RNCC: 5 | RNVC: 9
F300 0T 009 9606: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-462-8455
Ecrou Pour Raccord

144628455
303293-01-03: RNCC: 3 | RNVC: 2

5 May 1993

4730-14-336-4791
Tube To Boss Straight Adapter

143364791
AA6X8-13S: RNCC: 3 | RNVC: 2

14 Aug 1976

4730-14-363-2094
Tube To Boss Straight Adapter

143632094
133-12E: RNCC: 3 | RNVC: 2

3 Apr 1980

4730-14-342-2198
Sediment Strainer Element

143422198
552-000MA349F7A9: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-388-6925
Pipe Flange

143886925
F85-166: RNCC: 3 | RNVC: 9

3 Nov 1983

4730-14-344-7490
Tube To Boss Straight Adapter

143447490
EA1M782-15-02: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-428-2253
Tube Fitting Clinch Sleeve

144282253
19RA20-10: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-566-8468
Ma Fixture Assembly

145668468
133-01-026-01: RNCC: 3 | RNVC: 2

5 Jan 2011

4730-14-369-9017
Tuyau Collier

4730-14-476-5100
Tube To Boss Straight Adapter

144765100
RV1219: RNCC: 3 | RNVC: 2
85-695-4299: RNCC: 6 | RNVC: 9

14 Jun 1995

4730-14-435-3791
Quick Disconnect Coupling Half

144353791
RBE03.7200/IA/6: RNCC: 3 | RNVC: 2
RBE3-7200IA6: RNCC: 5 | RNVC: 2

8 Nov 1989

4730-14-333-9929
Quick Disconnect Coupling Half

143339929
RBE11-1816/IA/3: RNCC: 3 | RNVC: 2
RBE11-1816IA3: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-406-9808
Te Pour Tub Ebauche

144069808
MAT164-0004F5: RNCC: 3 | RNVC: 2

22 Jan 1986

4730-14-542-5492
Hose-Tube Flange Lateral

145425492
W00-420: RNCC: 3 | RNVC: 2

21 Jul 2004

4730-14-417-7754
Tube To Boss Straight Adapter

144177754
Q15GAI10S3/8BSP NU: RNCC: 3 | RNVC: 2
8954101766NU: RNCC: 3 | RNVC: 2

22 Jul 1987

4730-14-361-0066
Tube To Boss Straight Adapter

143610066
Q1-53-25-21-27NU: RNCC: 3 | RNVC: 2

19 Dec 1979

4730-14-378-6588
Tube Fitting Clinch Sleeve

143786588
LL001-CK40S: RNCC: 3 | RNVC: 2
8424400066: RNCC: 5 | RNVC: 2

11 Aug 1982

4730-14-237-6703
Raccord Multiple Co

142376703
80415: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-478-5966
Essai Raccord

144785966
RAC538080009: RNCC: 3 | RNVC: 2

8 Nov 1995

4730-14-340-0895
Tube Tee

143400895
TE3-8C0X3-8C0X8-10LAIT0N: RNCC: 3 | RNVC: 2
TE3-8C0X3-8C0X8-10LAIT0N: RNCC: 3 | RNVC: 2

18 Jan 1977

4730-14-334-2451
Tube Tee

143342451
GSM163-004BF15: RNCC: 3 | RNVC: 2
GSM163-04BF15: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-222-7300
Tube Tee

142227300
GSM1297FE3-21TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-490-3137
Hydraulic System Accessories Manifold

144903137
J05085-04-0800P002: RNCC: 3 | RNVC: 2

24 Sep 1997

4730-14-465-9461
Quick Disconnect Coupling Half

144659461
K07-63-208: RNCC: 3 | RNVC: 2

20 Oct 1993

4730-14-362-1008
Pipe Flange

143621008
GSM162-011F22REPJ: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-359-5864
Tube To Boss Straight Adapter

143595864
4DM8-12X100: RNCC: 3 | RNVC: 2
5000165612: RNCC: 5 | RNVC: 2
5000165612: RNCC: 5 | RNVC: 9

15 Oct 1979

4730-14-485-0817
Tube To Boss Straight Adapter

144850817
GSM164-058F25: RNCC: 3 | RNVC: 2

20 Dec 1996

4730-14-507-0967
Raccord Injection

145070967
R1-3-108-2: RNCC: 3 | RNVC: 2
9560168290: RNCC: 5 | RNVC: 2

10 Jun 1998

4730-14-432-9034
Hose To Boss Straight Adapter

144329034
G2021-16-16S: RNCC: 3 | RNVC: 2
DFE100812: RNCC: 5 | RNVC: 2

30 Jun 1989

4730-14-300-7502
Tube Tee

143007502
GSM523-026F24: RNCC: 3 | RNVC: 2
411MA127FA8: RNCC: 5 | RNVC: 2
GSM523-26F24: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-401-8522
Pipeline Flexible Spacer

144018522
DILATOFLEXNT150HHPN10: RNCC: 3 | RNVC: 2
98-657-300-030: RNCC: 5 | RNVC: 2
98657300030: RNCC: 5 | RNVC: 2
DILATOFLEXNT150HHPN10: RNCC: 5 | RNVC: 9

13 Jun 1985

4730-14-362-7674
Fluid Pressure Line Multiple Connector

143627674
111-08-08-04: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-268-9782
Fluid Passage Bolt

142689782
99641184007: RNCC: 3 | RNVC: 2
24113012203: RNCC: 5 | RNVC: 2
401738C: RNCC: 5 | RNVC: 2
99-641-184-007: RNCC: 5 | RNVC: 2
241130122: RNCC: 5 | RNVC: 9
241130122-03: RNCC: 5 | RNVC: 9
91HM36: RNCC: 5 | RNVC: 9
99641184007: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-220-5595
Fluid Passage Bolt

142205595
Q13-1B10-16X150Z: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-405-1829
Fourrure

144051829
9949959: RNCC: 3 | RNVC: 2
A-17732-01: RNCC: 5 | RNVC: 9
32340: RNCC: 5 | RNVC: 9

27 Nov 1985

4730-14-305-8977
Tube To Boss Straight Adapter

143058977
65-0-3575: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-360-3968
Dispositif Arret Ex

143603968
0712-0102B: RNCC: 3 | RNVC: 2
SAF0712-0102B: RNCC: 5 | RNVC: 9

23 Nov 1979

4730-14-563-0615
Hose Clamp

145630615
TORRO20-32/9-C7W1: RNCC: 3 | RNVC: 2
726677: RNCC: 5 | RNVC: 2
1267565026: RNCC: 5 | RNVC: 2

17 Dec 2009

4730-14-428-5041
Tube To Boss Straight Adapter

144285041
717.D.32.39X1,50: RNCC: 3 | RNVC: 2
P156D32: RNCC: 3 | RNVC: 2
717 D 32 39X1,50: RNCC: 5 | RNVC: 2
717D32: RNCC: 5 | RNVC: 2
717D32 39 150: RNCC: 5 | RNVC: 2
717D32-39X150: RNCC: 5 | RNVC: 2
717D3239150: RNCC: 5 | RNVC: 2
74717D32: RNCC: 5 | RNVC: 2
74717D32: RNCC: 5 | RNVC: 2

8 Dec 1988

4730-14-489-3469
Tube To Boss Straight Adapter

144893469
853-600-385-0: RNCC: 3 | RNVC: 2

9 Jul 1997

4730-14-276-6378
Raccord

142766378
P57-8X125: RNCC: 3 | RNVC: 9

1 Jan 1971

4730-14-516-1883
Tube Union

145161883
NO PRIMARY REF14-516-1883: RNCC: 3 | RNVC: 2
18090603: RNCC: 5 | RNVC: 2
METAL-GRIP 60.0NBR INOX AL625: RNCC: 5 | RNVC: 2

15 Sep 1999

4730-14-251-2615
Simple Male Dorient

142512615
G1204-27-21X27CYL: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-397-7007
Embout Epaule A Sou

143977007
GSM164-023F29: RNCC: 3 | RNVC: 2
MAT164-0355F29: RNCC: 3 | RNVC: 2
4730ACF4PN100DE26,67: RNCC: 3 | RNVC: 9

14 Dec 1984

4730-14-451-3800
Self-Sealing Coupling Assembly

144513800
SMK20-16S-PK: RNCC: 3 | RNVC: 2

15 Nov 1991

4730-14-462-2044
Hose To Gas Fitting Straight Adapter

144622044
MAT138-01-01: RNCC: 3 | RNVC: 2

15 Apr 1993

4730-14-387-8504
Tube To Boss Straight Adapter

143878504
NO PRIMARY REF14-387-8504: RNCC: 3 | RNVC: 2
0026-125DN32: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-435-1584
Swivel Flange To Hose Elbow

144351584
LV255-CS2816L: RNCC: 3 | RNVC: 2

23 Oct 1989

4730-14-374-5025
Tube To Boss Straight Adapter

143745025
341A75-5013-20: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-418-4030
Hose To Gas Fitting Straight Adapter

144184030
01361217: RNCC: 3 | RNVC: 2
136-12-17: RNCC: 5 | RNVC: 9
1361217: RNCC: 5 | RNVC: 9

19 Aug 1987

4730-14-431-2563
Tube Tee

144312563
702A30-5500-39: RNCC: 3 | RNVC: 2

12 Apr 1989

4730-14-393-1773
Tube To Boss Straight Adapter

143931773
8405-18-21: RNCC: 3 | RNVC: 2

12 Apr 1984

4730-14-226-6174
Tube Tee

142266174
6208-4281R: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-420-0107
Tube To Boss Straight Adapter

144200107
5A6-8-13CYL: RNCC: 3 | RNVC: 2
205101092: RNCC: 5 | RNVC: 2

17 Nov 1987

4730-14-335-9748
Demi-Collerette

143359748
121E71-301-52-0: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-242-8097
Tube Union

142428097
NO PRIMARY REF14-242-8097: RNCC: 3 | RNVC: 2
495 3-8: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-576-8197
Flange To Tube Elbow

145768197
M2821345800000: RNCC: 3 | RNVC: 2

17 Jul 2013

4730-14-276-2443

4730-14-343-8091

4730-14-338-0800

4730-14-457-2254
Quick Disconnect Coupling Half

144572254
RBE11-1816/OD/IA: RNCC: 3 | RNVC: 2
RAR1546: RNCC: 5 | RNVC: 2

19 Aug 1992

4730-14-329-5312
Ventilat Silencieux

143295312
PAA63-03-002: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-349-0174
Fluid Pressure Line Multiple Connector

143490174
21-39-32VK: RNCC: 3 | RNVC: 2

19 Apr 1978

4730-14-562-9858
Hose Clamp

145629858
260569090: RNCC: 3 | RNVC: 2
NEMO 40-90: RNCC: 5 | RNVC: 1
725172: RNCC: 5 | RNVC: 2
26 0 569 090: RNCC: 5 | RNVC: 2

10 Dec 2009

4730-14-385-7481
Tube To Boss Straight Adapter

143857481
NO PRIMARY REF 14-385-7481: RNCC: 3 | RNVC: 2
2103-05-02-00: RNCC: 5 | RNVC: 9
32149-31: RNCC: 5 | RNVC: 9

26 Jul 1983

4730-14-449-7205
Fluid Pressure Line Multiple Connector

144497205
17A10-16X150: RNCC: 3 | RNVC: 2
217104161: RNCC: 5 | RNVC: 2

4 Sep 1991

4730-14-312-1514

4730-14-477-1533
Raccord

144771533
033295: RNCC: 3 | RNVC: 2
4730AA2076862: RNCC: 6 | RNVC: 9

26 Jul 1995

4730-14-568-8566
Fluid Pressure Line Multiple Connector

145688566
7420786872: RNCC: 3 | RNVC: 2
20786872: RNCC: 5 | RNVC: 2

12 Jul 2011

4730-14-227-8549

4730-14-494-0283
Quick Disconnect Coupling Half

144940283
CCF3-8: RNCC: 3 | RNVC: 2
F300 0T 015 0910: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-298-1560

4730-14-333-8742

4730-14-334-7465

4730-14-479-1822
Hose Fitting Swaging Socket

144791822
FI 2.83.05.02: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-260-9242

4730-14-353-8961

4730-14-570-6750
Tube To Boss Straight Adapter

145706750
MAMEL00075: RNCC: 3 | RNVC: 2

17 Jan 2012

4730-14-213-1795

4730-14-571-0988
Flange Elbow

145710988
M2821352400100: RNCC: 3 | RNVC: 2

20 Feb 2012

4730-14-344-5256

4730-14-364-0812

4730-14-278-3087

4730-14-509-6946
Bulkhead Hose Connector

145096946
726.B.08S.08.BP: RNCC: 3 | RNVC: 2
726 B 08S 08 BP: RNCC: 5 | RNVC: 2
726B08S08BP: RNCC: 5 | RNVC: 2
74726B08S08BP: RNCC: 5 | RNVC: 2

28 Oct 1998

4730-14-276-7074
Tube To Boss Straight Adapter

142767074
3C50-6: RNCC: 3 | RNVC: 2
RL6: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-479-1803
Hose Fitting Swaging Socket

144791803
FI 2.83.07.01: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-306-8993
Demi-Raccord A Brid

143068993
0235221240: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-361-7066
Tube To Boss Straight Adapter

143617066
M03375-82: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-383-2216
Pipe Flange

143832216
MN6363-1DN150: RNCC: 2 | RNVC: 2

17 Mar 1983

4730-14-265-1014
Quick Disconnect Coupling Half

142651014
9949625A: RNCC: 3 | RNVC: 2
9949625: RNCC: 5 | RNVC: 2
TAHM757S4-727-12D: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-458-5901
Pipe Fitting Flared Collar

144585901
89059-300: RNCC: 3 | RNVC: 2
89059300: RNCC: 5 | RNVC: 2
RAR1584: RNCC: 5 | RNVC: 2

27 Oct 1992

4730-14-284-9130
Tube To Boss Straight Adapter

142849130
52-20-15-21C0NU: RNCC: 3 | RNVC: 2
UMCL20X15-21NNU: RNCC: 3 | RNVC: 2
MCL20V21: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-235-6142
Fluid Passage Bolt

142356142
1050-27-700-14-0: RNCC: 3 | RNVC: 2
27-700-14-0: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-489-1808
Fluid-Emulsion Spray Nozzle

144891808
70786-4,9MM: RNCC: 3 | RNVC: 2
4400-22-A-F54-4,9MM: RNCC: 5 | RNVC: 2

2 Jul 1997

4730-14-210-9717
Fluid Pressure Line Multiple Connector

142109717
509-4-8X100: RNCC: 3 | RNVC: 2
13L4-8X100: RNCC: 3 | RNVC: 2
ST406M53P199-21: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-363-8916
Tube To Boss Straight Adapter

143638916
NO PRIMARY REF14-363-8916: RNCC: 3 | RNVC: 2
Z46062-2: RNCC: 5 | RNVC: 9

7 Aug 1980

4730-14-261-8500
Pipe Flange

142618500
RUHB7-12-6: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-368-7393
Tube Tee

143687393
231-1-00010: RNCC: 3 | RNVC: 2
31A10: RNCC: 5 | RNVC: 2

10 Mar 1981

4730-14-467-7831
Tube To Gas Fitting Straight Adapter

144677831
F63XS10-1/4: RNCC: 3 | RNVC: 2

27 Jan 1994

4730-14-203-4794
Raccord Special

142034794
M3C711-16M1: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-283-0957
Tube To Boss Straight Adapter

142830957
NO PRIMARY REF14-283-0957: RNCC: 3 | RNVC: 2
BR765-23M73P2: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-429-0708
Buse Ejecteur

144290708
3/139/8/00051-3A: RNCC: 3 | RNVC: 2

9 Jan 1989

4730-14-322-5438

4730-14-561-5665
Hose Connector Sleeve

145615665
048505013: RNCC: 3 | RNVC: 2
048508013: RNCC: 3 | RNVC: 2
FS0001838: RNCC: 6 | RNVC: 9

29 Jul 2009

4730-14-245-9048
Injecteur

142459048
IN400-2: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-260-9157
Pipe Flange

142609157
7062CC1F1F25AF42-2: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-385-7476
Tube To Boss Straight Adapter

143857476
07-187-8-8: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-370-4659
Essence Raccord

143704659
23MEPK325200004PL2REP1-2-4-5-6: RNCC: 3 | RNVC: 2
CMT30E9005PL2REP1-2-4-5-6: RNCC: 5 | RNVC: 2

18 May 1981

4730-14-429-1850
Tube To Boss Straight Adapter

144291850
G4PB4-1/8: RNCC: 3 | RNVC: 2
G4PB4-1/8: RNCC: 3 | RNVC: 9
2426715240: RNCC: 5 | RNVC: 2
2426715240: RNCC: 5 | RNVC: 9
G4BPB4-1/8: RNCC: 5 | RNVC: 9

11 Jan 1989

4730-14-317-4795
Tube To Boss Straight Adapter

143174795
L4730-01F1-3-5: RNCC: 2 | RNVC: 2

1 Jan 1975

4730-14-208-5408
Fluid Passage Bolt

142085408
NO PRIMARY REF14-208-5408: RNCC: 3 | RNVC: 2
312538: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-254-7530
Fluid Pressure Line Multiple Connector

142547530
NO PRIMARY REF14-254-7530: RNCC: 3 | RNVC: 2
NRV22-3X313A: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-372-6052
Tube To Boss Straight Adapter

143726052
29520190613: RNCC: 3 | RNVC: 2
190613: RNCC: 5 | RNVC: 2
60190613: RNCC: 5 | RNVC: 2
19-06-13: RNCC: 5 | RNVC: 9

21 Sep 1981

4730-14-294-3948
Bulkhead Hose Connector

142943948
121A77-200-04-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-212-1480
Tube Coupling Assembly

142121480
0-3951SB25X32X32A: RNCC: 3 | RNVC: 2
0-3951SB25X32X32A: RNCC: 5 | RNVC: 9
85-691-3820: RNCC: 6 | RNVC: 9

5 Jul 1980

4730-14-438-7417
Pipe Joint Welding Ring

144387417
LN324-079REP14: RNCC: 3 | RNVC: 2
LN324-079F7REP14: RNCC: 5 | RNVC: 2

3 Apr 1990

4730-14-342-4537
Flexible Tube Coupling Assembly

143424537
DHS613-211.23: RNCC: 1 | RNVC: 2
LS16-03: RNCC: 3 | RNVC: 2
DHS613-211-23: RNCC: 5 | RNVC: 2
LS1603: RNCC: 5 | RNVC: 2
N7730711603: RNCC: 5 | RNVC: 9

16 May 1977

4730-14-429-0628
Pipe Coupling Leak Repair Clamp

144290628
LS03-011-02: RNCC: 3 | RNVC: 2

9 Jan 1989

4730-14-257-2571
Fluid Passage Bolt

142572571
702A30-0106-20: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-423-4471
Pipe Flange

144234471
UA50088006PN50-11B2SDN40: RNCC: 2 | RNVC: 2
4730HCPN50DN04011B2S: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-273-5112
Tube Coupling

142735112
7062BB1RPET1-10UA9: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-512-8413
Tube Coupling

145128413
217048: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-357-0951
Tube To Boss Straight Adapter

143570951
79064022: RNCC: 3 | RNVC: 2
79064022: RNCC: 5 | RNVC: 9

7 Jun 1979

4730-14-543-4827
Tube Tee

145434827
103043009009A: RNCC: 3 | RNVC: 9

9 Nov 2004

4730-14-492-1222
Tube To Boss Swivel Joint

144921222
9958302: RNCC: 3 | RNVC: 2
F300 0T 006 9845: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-305-1205

4730-14-449-9280
Tube To Boss Straight Adapter

144499280
MAT164-0056F7: RNCC: 3 | RNVC: 2

16 Sep 1991

4730-14-393-3090
Tube Tee

143933090
4730GD020: RNCC: 2 | RNVC: 2
BN324-554F4-20: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-297-6639
Pipe Flange

142976639
9012-30: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-374-1780
Bulkhead Hose Connector

143741780
360A32-2196-21: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-359-5861
Tube To Boss Straight Adapter

143595861
9DM30-33X200: RNCC: 3 | RNVC: 2
5000495717: RNCC: 5 | RNVC: 2
5000495717: RNCC: 5 | RNVC: 9
5000495717: RNCC: 6 | RNVC: 9

15 Oct 1979

4730-14-350-2717
Tube To Boss Straight Adapter

143502717
9114223547: RNCC: 3 | RNVC: 2
I4-22-26X34BR: RNCC: 5 | RNVC: 9

14 Jun 1978

4730-14-551-8383
Tube To Boss Straight Adapter

145518383
GE08LREDOMDCF: RNCC: 3 | RNVC: 2
437162: RNCC: 5 | RNVC: 2
GE08LREDOMDCF: RNCC: 5 | RNVC: 9

30 Oct 2006

4730-14-506-0341
Flange To Tube Elbow

145060341
RA1M521101142: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-388-2504
Ens Filtre Aimant

143882504
A5032-1REP2A4ETC1312: RNCC: 3 | RNVC: 2

12 Oct 1983

4730-14-401-8315
Diaphragme Ensemble

144018315
401MA0588F3REP1-2-4A12: RNCC: 3 | RNVC: 2
401MA588F3REP1-2-4A12: RNCC: 5 | RNVC: 2

13 Jun 1985

4730-14-574-1041
Hose Clamp

145741041
ASNA0033H202: RNCC: 1 | RNVC: 2
ASNA0033H202: RNCC: 3 | RNVC: 2
ASNA0033H202: RNCC: 5 | RNVC: 2

6 Dec 2012

4730-14-534-0292
Tube Union

145340292
10643808: RNCC: 3 | RNVC: 2

10 Mar 2003

4730-14-571-7395
Tube Tee

145717395
14400538J: RNCC: 3 | RNVC: 2

27 Apr 2012

4730-14-041-2329

4730-14-361-0114
Tube To Boss Straight Adapter

143610114
GSM164-024F6: RNCC: 3 | RNVC: 2
MAT164-0315F1: RNCC: 3 | RNVC: 2

19 Dec 1979

4730-14-334-2446
Tube Tee

143342446
GSM163-004BF10: RNCC: 3 | RNVC: 2
GSM163-04BF10: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-320-9736
Tube To Boss Straight Adapter

143209736
ALIS012-16: RNCC: 3 | RNVC: 2
A12IS016X150: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-387-8505
Tube To Boss Straight Adapter

143878505
NO PRIMARY REF14-387-8505: RNCC: 3 | RNVC: 2
0026-125DN40: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-387-8871
Tube Tee

143878871
723.D.08.06.08S: RNCC: 3 | RNVC: 2
P166D080608S: RNCC: 3 | RNVC: 2
723D08-06-08S: RNCC: 5 | RNVC: 2
74723D080608S: RNCC: 5 | RNVC: 2
74723D080608S: RNCC: 5 | RNVC: 2
723 D 08 06 08S: RNCC: 5 | RNVC: 2
723D08 06 08S: RNCC: 5 | RNVC: 2
723D080608S: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-379-3430
Fluid Pressure Line Multiple Connector

143793430
NO PRIMARY REF14-379-3430: RNCC: 3 | RNVC: 2
345011601: RNCC: 5 | RNVC: 9
345-01160-1: RNCC: 5 | RNVC: 9
345-01160-0: RNCC: 5 | RNVC: 9
345011600: RNCC: 5 | RNVC: 9

1 Oct 1982

4730-14-354-6765
Embout-Raccord

143546765
7051-1-78F12-3: RNCC: 2 | RNVC: 2
7051-1REP3: RNCC: 3 | RNVC: 2

31 Jan 1979

4730-14-406-4119
Quick Disconnect Coupling Half

144064119
RBE03.2806/IC/9/OD: RNCC: 3 | RNVC: 2
RBE03-28060DIC9W: RNCC: 5 | RNVC: 2
2427435140: RNCC: 5 | RNVC: 2
RBE03-2806ODIC9W: RNCC: 5 | RNVC: 2
RBE3-2806/9/OD/IC/W: RNCC: 5 | RNVC: 2
0058650W00: RNCC: 5 | RNVC: 2
2427435140: RNCC: 5 | RNVC: 9
RBE03-2806/OD/IC/9/W: RNCC: 5 | RNVC: 9

8 Jan 1986

4730-14-424-3211
Quick Disconnect Coupling Half

144243211
RBE06-1151/IA/4,5: RNCC: 3 | RNVC: 2
RBE06-1151IA4-5: RNCC: 5 | RNVC: 2
91511283: RNCC: 5 | RNVC: 2

19 May 1988

4730-14-539-4673
Tube Fitting Socket Welded Ferrule

145394673
307-209-202-0: RNCC: 3 | RNVC: 2

15 Jan 2004

4730-14-339-9004
Tube Coupling Assembly

143399004
0-3811S20A: RNCC: 3 | RNVC: 2
0-3811S20A: RNCC: 5 | RNVC: 9
85-688-9425: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-14-251-9465
Fluid Passage Bolt

142519465
34-511-11-02: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-417-7801
Tube Tee

144177801
4730AB4.1DN10NU: RNCC: 2 | RNVC: 2
LN329-017REP40: RNCC: 3 | RNVC: 2
LV300-NS10S: RNCC: 3 | RNVC: 2
89041000NU: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-418-5093
Tube Tee

144185093
ST2069DN10Z2CND17-12-02: RNCC: 2 | RNVC: 2

26 Aug 1987

4730-14-414-1603
Tube To Boss Straight Adapter

144141603
G12-10-12-17CYL: RNCC: 3 | RNVC: 2

22 Jan 1987

4730-14-338-4867
Fluid Pressure Line Multiple Connector

143384867
341A75-5031-20: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-525-7136
Lubrication Fitting

145257136
20 242 524 1040: RNCC: 3 | RNVC: 2
506008: RNCC: 3 | RNVC: 2
242-524-1040: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-338-3405
Sediment Strainer Element

143383405
714-1-2-7FILIN0X: RNCC: 3 | RNVC: 2
F1545-02: RNCC: 3 | RNVC: 2
A71403: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-573-8512
Hose Clamp

145738512
ABS0901R115: RNCC: 1 | RNVC: 2
ABS0901R115: RNCC: 3 | RNVC: 2
901115: RNCC: 5 | RNVC: 1
E-ABS-0901-R115: RNCC: 5 | RNVC: 2

14 Nov 2012

4730-14-350-7957
Tube To Boss Straight Adapter

143507957
620-849-562-0: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-268-6305
Tube To Boss Straight Adapter

142686305
Q1-52-12-3-8BGSTF: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-334-2596
Tube To Boss Straight Adapter

143342596
Q1-52-10-1-4BGS: RNCC: 3 | RNVC: 2

23 Apr 1976

4730-14-317-4803
Tube Union

143174803
L4730-01F2-3-12: RNCC: 2 | RNVC: 2
4730AE-VIS20: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-309-3943
Pipe Flange

143093943
536-403-017DET20: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-273-5114
Tube Coupling

142735114
7062BB1RPET1-20UA9: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-410-7705
Quick Disconnect Coupling Half

144107705
SBA08-7103: RNCC: 3 | RNVC: 2

9 Jul 1986

4730-14-357-6301
Bulkhead Hose Connector

143576301
0-300749S: RNCC: 3 | RNVC: 2
0-300749S: RNCC: 5 | RNVC: 9
85-689-6269: RNCC: 6 | RNVC: 9

27 Jun 1979

4730-14-210-9716
Fluid Pressure Line Multiple Connector

142109716
109-32-39X150: RNCC: 3 | RNVC: 2
13A32-39X150: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-441-4889
Fluid Flow Restrictor

144414889
332A72-1033-20: RNCC: 3 | RNVC: 2
332A72103320: RNCC: 5 | RNVC: 2

30 Aug 1990

4730-14-204-1013
Fluid Passage Bolt

142041013
3130S99-85-013: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-488-6249
Pipeline Flexible Spacer

144886249
308151-21: RNCC: 3 | RNVC: 2

23 May 1997

4730-14-343-4947
Fluid Passage Bolt

143434947
BM113646: RNCC: 3 | RNVC: 2
85-667-4201: RNCC: 6 | RNVC: 9

16 Jun 1977

4730-14-436-1254
Swivel Retaining Pipe Flange

144361254
J05150-04-0500P019: RNCC: 3 | RNVC: 2

6 Dec 1989

4730-14-278-7774
Tube To Boss Straight Adapter

142787774
Q1-53-20-27X150: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-460-1437
Quick Disconnect Coupling Half

144601437
SMK20-10L-PG: RNCC: 3 | RNVC: 2

13 Jan 1993

4730-14-531-9318
Special-Shaped Hose Clamp

145319318
2310-08368: RNCC: 3 | RNVC: 2

25 Sep 2002

4730-14-492-8247
Tube To Boss Straight Adapter

144928247
NO PRIMARY REF14-492-8247: RNCC: 3 | RNVC: 2
S1008: RNCC: 5 | RNVC: 9
F300 0T 008 9540: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-324-1279
Tube Tee

143241279
Q1-5TR30X25X30NN: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-043-0249
Tube Coupling

140430249
PE60001K05: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-450-4299
Tube To Boss Straight Adapter

144504299
118092A: RNCC: 3 | RNVC: 2

9 Oct 1991

4730-14-450-4404
Pipe Flange

144504404
4730HBPN16DN025: RNCC: 2 | RNVC: 2

9 Oct 1991

4730-14-559-8459
Hose Coupling

145598459
DH 0458 41 54: RNCC: 3 | RNVC: 2

24 Feb 2009

4730-14-243-1522
Bouchon Filete Spec

142431522
400646: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-575-3184
Reducing Tube Coupling Nut

145753184
332A52-1404-21: RNCC: 3 | RNVC: 2
332A52140421: RNCC: 5 | RNVC: 2

27 Mar 2013

4730-14-308-0953
Tube Coupling Nut Assembly

143080953
E-JET27P: RNCC: 3 | RNVC: 2
KE-JET27P: RNCC: 5 | RNVC: 2
EJET27P: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-306-7581
Bride A Zinc

143067581
000MA0782F4REP2DN20: RNCC: 3 | RNVC: 2
000MA782F4REP2DN20: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-307-6325
Pipe Flange

143076325
554-422-209MLEA: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-558-8672
Tube To Boss Elbow

145588672
CG206-NP20-20: RNCC: 3 | RNVC: 2

18 Nov 2008

4730-14-223-2883
Raccord De Reductio

142232883
A10-77-060-08-0: RNCC: 3 | RNVC: 2
A10-77-060-08-0: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-263-6402
Tube To Boss Straight Adapter

142636402
7062BC1RPET2-25CC30NCD10: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-452-2906
Swivel Flange To Hose Bend

144522906
88-01-015-49: RNCC: 3 | RNVC: 9

8 Jan 1992

4730-14-344-8256
Tube To Boss Straight Adapter

143448256
GSM164-042F4: RNCC: 3 | RNVC: 2
GSM164-05F74: RNCC: 5 | RNVC: 2

9 Sep 1977

4730-14-574-2743
Quick-Disconnect Nipple

145742743
NH3/8GRO: RNCC: 3 | RNVC: 2

20 Dec 2012

4730-14-445-2596
Tube To Hose Straight Adapter

144452596
60190405: RNCC: 3 | RNVC: 2
6019-04-05: RNCC: 5 | RNVC: 9

6 Feb 1991

4730-14-435-2555
Quick Disconnect Coupling Half

144352555
RBE06-6906: RNCC: 3 | RNVC: 2
8035511Q00: RNCC: 5 | RNVC: 2
91613621: RNCC: 5 | RNVC: 2

2 Nov 1989

4730-14-297-4266
Tube Coupling

142974266
NO PRIMARY REF14-297-4266: RNCC: 3 | RNVC: 2
511-26X34: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-476-1421
Quick Disconnect Coupling Half

144761421
K05L38-201: RNCC: 3 | RNVC: 2

24 May 1995

4730-14-493-1318
Tube To Boss Straight Adapter

144931318
NO PRIMARY REF14-493-1318: RNCC: 3 | RNVC: 2
0RSCA25X27-200DTCW12: RNCC: 5 | RNVC: 9
F300 0T 010 4423: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-389-5108
Fluid Passage Bolt

143895108
365A75-2079-20: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-438-8539
Tube To Boss Straight Adapter

144388539
AA16X20-27NDT: RNCC: 3 | RNVC: 2
LK174NW6094N: RNCC: 5 | RNVC: 2

10 Apr 1990

4730-14-365-9363

4730-14-457-5385
Bulkhead Hose Connector

144575385
230370: RNCC: 3 | RNVC: 2
85-694-7689: RNCC: 6 | RNVC: 9

10 Sep 1992

4730-14-269-2053
Pipe Flange

142692053
7066EE1M88-9: RNCC: 2 | RNVC: 2
4730BJ-88,9M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-562-5995
Pipeline Flexible Spacer

145625995
R1/250/KR 320-WG/E: RNCC: 3 | RNVC: 2

6 Nov 2009

4730-14-355-5570
Tube To Boss Straight Adapter

143555570
1DM14-20X150: RNCC: 3 | RNVC: 2
AA14X20-150N: RNCC: 3 | RNVC: 2

19 Mar 1979

4730-14-363-6732
Pipe Flange

143636732
01400153NTT020: RNCC: 3 | RNVC: 2
0140015337A020: RNCC: 3 | RNVC: 9
0140015337A020: RNCC: 3 | RNVC: 9
14-20-15: RNCC: 5 | RNVC: 9

6 Jul 1980

4730-14-416-9083
Bulkhead Hose Connector

144169083
F530-07-14: RNCC: 3 | RNVC: 2

25 Jun 1987

4730-14-334-2538
Tube Tee

143342538
GSM163-017F36: RNCC: 3 | RNVC: 2
GSM163-17F36: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-524-1028
Pipe Flange

145241028
MAT162-0321F1DN20: RNCC: 3 | RNVC: 2
MAT162-0321DN20MALE: RNCC: 5 | RNVC: 2

28 Feb 2001

4730-14-418-3542
Quick Disconnect Coupling Half

144183542
RBE06-1813IA3: RNCC: 3 | RNVC: 2

12 Aug 1987

4730-14-306-7560
Diaphragme

143067560
GSM160-002F12REP1: RNCC: 3 | RNVC: 2
411MA502REP2: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-326-9062

4730-14-272-2949
Tube To Boss Straight Adapter

142722949
70167117: RNCC: 3 | RNVC: 2
167117: RNCC: 5 | RNVC: 9
70167117: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-277-3430
Fluid Pressure Line Multiple Connector

142773430
0000301480: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-553-1320
Tube To Boss Straight Adapter

145531320
GE06LMEDOMDCF: RNCC: 3 | RNVC: 2
437395: RNCC: 5 | RNVC: 2
GE06LMEDOMDCF: RNCC: 5 | RNVC: 9

6 Mar 2007

4730-14-371-0524
Tube Tee

143710524
8450086366: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-525-9849
Non-Metallic Connecting Sleeve

145259849
85410002: RNCC: 3 | RNVC: 2

25 Jun 2001

4730-14-461-9227
Bulkhead Hose Connector

144619227
T700A3240039100: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-526-2399
Tube To Boss Straight Adapter

145262399
K102397: RNCC: 3 | RNVC: 2

11 Jul 2001

4730-14-570-3939
Reducing Tube Coupling Nut

145703939
MEASTRED03100: RNCC: 3 | RNVC: 2

13 Dec 2011

4730-14-251-9177

4730-14-222-7325

4730-14-366-6004

4730-14-563-9484
Boss Reducer

145639484
W006525229: RNCC: 3 | RNVC: 2

30 Mar 2010

4730-14-309-4383

4730-14-493-6809
Pipe Flange

144936809
343 919 IND.1: RNCC: 3 | RNVC: 2

8 Oct 1997

4730-14-461-3559
Quick Disconnect Coupling Assembly

144613559
12311083-2: RNCC: 3 | RNVC: 2
4100076: RNCC: 5 | RNVC: 2

9 Mar 1993

4730-14-375-5053
Tube To Boss Straight Adapter

143755053
130-5-55: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-426-7940
Tube Tee

144267940
4730HEING139,7X6,3-76,1X2,9: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-567-7180
Tube Outlet

145677180
9087 18 13: RNCC: 3 | RNVC: 2

7 Apr 2011

4730-14-416-7396
Support Jaug Embase

144167396
525210: RNCC: 3 | RNVC: 2

25 Jun 1987

4730-14-345-4854
Threaded Tube Fitting Plug

143454854
373-1-4: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-441-1839
Tube To Gas Fitting Straight Adapter

144411839
66411-6-4: RNCC: 3 | RNVC: 2
91631243: RNCC: 5 | RNVC: 2

22 Aug 1990

4730-14-260-9161
Pipe Flange

142609161
7062CC1F1F48AF42-2: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-410-9822
Tube To Boss Straight Adapter

144109822
Q1-5204JC20-21-27CYL: RNCC: 3 | RNVC: 2
ORK20X21-27N: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-398-7060
Pipe Flange

143987060
J05085-04-0200P032: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-351-5106
Tube To Boss Straight Adapter

143515106
486378W: RNCC: 3 | RNVC: 2

12 Sep 1978

4730-14-457-8885
Quick-Disconnect Nipple

144578885
1803230: RNCC: 3 | RNVC: 2

26 Sep 1992

4730-14-406-7181
Tube To Boss Straight Adapter

144067181
GE6-16SRED: RNCC: 3 | RNVC: 2
GE6-16SRED: RNCC: 5 | RNVC: 2

8 Jan 1986

4730-14-382-5088
Fluid Pressure Line Multiple Connector

143825088
16764360: RNCC: 3 | RNVC: 2
16764360: RNCC: 5 | RNVC: 9

17 Feb 1983

4730-14-398-9595
Tube To Boss Straight Adapter

143989595
1121670900: RNCC: 3 | RNVC: 2
DAH1121670900: RNCC: 5 | RNVC: 9

6 Mar 1985

4730-14-395-3705
Tube To Gas Fitting Straight Adapter

143953705
N0189F6A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-435-0403
Tube To Boss Straight Adapter

144350403
84052027: RNCC: 3 | RNVC: 2

16 Oct 1989

4730-14-469-9164
Straight Tubing Connector

144699164
RACDROITUBE16: RNCC: 3 | RNVC: 2

18 May 1994

4730-14-545-0630
Tube To Boss Straight Adapter

145450630
00129452: RNCC: 3 | RNVC: 2
6201: RNCC: 3 | RNVC: 9

16 Mar 2005

4730-14-521-1838
Tube Tee

145211838
E29591JB22AE: RNCC: 2 | RNVC: 2

12 Jul 2000

4730-14-387-5716
Pipe Flange

143875716
437998: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-444-7448
Tube To Boss Straight Adapter

144447448
123621301: RNCC: 3 | RNVC: 9

21 Jan 1991

4730-14-525-2976
Quick Disconnect Coupling Half

145252976
NBB.104: RNCC: 3 | RNVC: 2
1989 086 152: RNCC: 5 | RNVC: 2

23 May 2001

4730-14-442-6874
Tube To Boss Straight Adapter

144426874
3070-006-0: RNCC: 3 | RNVC: 2

24 Oct 1990

4730-14-562-5420
Pipeline Flexible Spacer

145625420
0429063: RNCC: 3 | RNVC: 2
A1/125/KR320-WG/E: RNCC: 3 | RNVC: 2

3 Nov 2009

4730-14-396-3311
Tuyauterie Support

143963311
5.800.670: RNCC: 3 | RNVC: 9
5-8006-70: RNCC: 5 | RNVC: 9
5800670: RNCC: 5 | RNVC: 9

27 Nov 1984

4730-14-393-3868
Tube Fitting Brazing Ferrule

143933868
269060: RNCC: 3 | RNVC: 2
269060-CU: RNCC: 3 | RNVC: 2
70012352: RNCC: 3 | RNVC: 2
269060-CU: RNCC: 5 | RNVC: 9
70012352: RNCC: 5 | RNVC: 9

7 Apr 1984

4730-14-274-8941
Tube To Boss Straight Adapter

142748941
NO PRIMARY REF14-274-8941: RNCC: 3 | RNVC: 2
12425A: RNCC: 5 | RNVC: 2
12425A: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-561-7169
Flange To Hose Straight Adapter

145617169
H1243610-121600: RNCC: 3 | RNVC: 2

25 Aug 2009

4730-14-331-0893
Tube To Boss Straight Adapter

143310893
UMA12-22-150: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-494-6989
Tube To Boss Straight Adapter

144946989
NO PRIMARY REF14-494-6989: RNCC: 3 | RNVC: 2
0171128: RNCC: 5 | RNVC: 9
F300 0T 017 7980: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-566-6443
Tube To Boss Straight Adapter

145666443
GE06SMEDOMDCF: RNCC: 3 | RNVC: 2
A231004000274: RNCC: 5 | RNVC: 2

2 Dec 2010

4730-14-440-8995
Tube Union

144408995
GE16SREDOMD: RNCC: 3 | RNVC: 2
038549H: RNCC: 5 | RNVC: 2
91975280: RNCC: 5 | RNVC: 2
F300 0T 005 6356: RNCC: 6 | RNVC: 9

7 Aug 1990

4730-14-503-8215
Raccord Droit

145038215
2103.01.41.00: RNCC: 3 | RNVC: 9

28 Jan 1998

4730-14-565-5027
Self-Sealing Coupling Assembly

145655027
704A44421039: RNCC: 1 | RNVC: 2
SAPIFSM12: RNCC: 3 | RNVC: 2

25 Aug 2010

4730-14-221-7295

4730-14-370-2612

4730-14-294-7288

4730-14-339-9698
Tube Tee

143399698
GSM163-015F36: RNCC: 3 | RNVC: 2
GSM163-15F36: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-532-5604
Bulkhead Hose Connector

145325604
330A54-0200-04: RNCC: 3 | RNVC: 2

13 Nov 2002

4730-14-364-9974
About De Raccordeme

143649974
03-67-176RUBA: RNCC: 3 | RNVC: 2

2 Sep 1980

4730-14-238-5150
Tube Fitting Brazing Ferrule

142385150
579-716-014-0: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-393-7570
Tube To Boss Straight Adapter

143937570
NO PRIMARY REF14-393-7570: RNCC: 3 | RNVC: 2
9-329-2958-002: RNCC: 5 | RNVC: 9

23 Jun 1984

4730-14-405-9922
Pipeline Flexible Spacer

144059922
704033698029: RNCC: 3 | RNVC: 2
704A33698029: RNCC: 5 | RNVC: 2
3553700614: RNCC: 5 | RNVC: 9

18 Dec 1985

4730-14-405-7787
Fluid Passage Bolt

144057787
1405037: RNCC: 3 | RNVC: 2

4 Dec 1985

4730-14-351-2089
Fluid Pressure Line Multiple Connector

143512089
216127: RNCC: 3 | RNVC: 2

10 Aug 1978

4730-14-551-5443
Tube Tee

145515443
710864: RNCC: 3 | RNVC: 2

29 Sep 2006

4730-14-406-1434
Fluid Pressure Line Multiple Connector

144061434
C103483: RNCC: 3 | RNVC: 2
1004947Y00: RNCC: 5 | RNVC: 2

8 Jan 1986

4730-14-432-0738
Quick Disconnect Coupling Half

144320738
1020.523: RNCC: 3 | RNVC: 2
4623: RNCC: 3 | RNVC: 2
1020.523: RNCC: 5 | RNVC: 9

22 May 1989

4730-14-387-8932
Fluid Pressure Line Multiple Connector

143878932
SM625MF: RNCC: 3 | RNVC: 2

12 Oct 1983

4730-14-330-3517
Self-Sealing Coupling Half

143303517
6034: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-433-9757
Tube Fitting Locknut

144339757
ATL106055010020: RNCC: 3 | RNVC: 2

25 Aug 1989

4730-14-432-9566
Tube Tee

144329566
543710: RNCC: 3 | RNVC: 2

5 Jul 1989

4730-14-414-5148
Tape De Pont

144145148
BN325519AF5REPA-DN100: RNCC: 2 | RNVC: 2

6 Feb 1987

4730-14-369-1741
Speci Raccord Droit

143691741
3655-48D: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-259-7469

4730-14-268-1091

4730-14-561-7211
Tube Elbow

145617211
ENPMB8: RNCC: 3 | RNVC: 2
ENPMB8: RNCC: 5 | RNVC: 9

26 Aug 2009

4730-14-310-4771

4730-14-314-1731

4730-14-367-7819

4730-14-494-1237
Union

144941237
022375-04U: RNCC: 3 | RNVC: 2
F300 0T 015 5858: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-494-0893
Union

144940893
202425814080: RNCC: 3 | RNVC: 2
F300 0T 015 4292: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-568-3804
Branched Tubing Connector

145683804
049726: RNCC: 3 | RNVC: 2
049726: RNCC: 5 | RNVC: 2

26 May 2011

4730-14-231-7332
Bouchon Equipe

142317332
500703: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-212-1242
Pipe Flange

142121242
4730BX-168,3: RNCC: 2 | RNVC: 2
7068FDN168-3B12S: RNCC: 3 | RNVC: 2
7068F168-3: RNCC: 5 | RNVC: 9

5 Jul 1980

4730-14-562-5932
Pipeline Flexible Spacer

145625932
R1/125/KR 320-WG/E/AV: RNCC: 3 | RNVC: 2

5 Nov 2009

4730-14-261-1639

4730-14-577-0162
Tube Coupling Nut Ring

145770162
BM411441: RNCC: 3 | RNVC: 2
4730MT0200517: RNCC: 6 | RNVC: 9

29 Jul 2013

4730-14-330-6699

4730-14-365-2880

4730-14-365-3435

4730-14-476-4556
Fluid Flow Restrictor

144764556
280798-1: RNCC: 3 | RNVC: 2
85-693-8879: RNCC: 6 | RNVC: 9

14 Jun 1995

4730-14-240-7118
Manchette Droite A

142407118
NG410-54-36X123: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-272-9302
Tube Coupling Inverted Nut

142729302
Q15-1R5504: RNCC: 3 | RNVC: 2
R5504: RNCC: 5 | RNVC: 2
RQ15-1R5504: RNCC: 5 | RNVC: 2
84404-04: RNCC: 5 | RNVC: 2
99058175: RNCC: 5 | RNVC: 2
91915417: RNCC: 5 | RNVC: 9
4730AA0012274: RNCC: 6 | RNVC: 9
F300 0T 004 4481: RNCC: 6 | RNVC: 9

1 Jan 1971

4730-14-525-0443
Hose To Boss Straight Adapter

145250443
SN5385E-PN250: RNCC: 3 | RNVC: 2
SYB2887: RNCC: 5 | RNVC: 2

16 May 2001

4730-14-513-1305
Quick Disconnect Coupling Half

145131305
RBE032804-IC-6: RNCC: 3 | RNVC: 2
RBE032804IC6: RNCC: 5 | RNVC: 2

5 Mar 1999

4730-14-332-3844
Raccord Complet

143323844
STWA29-53: RNCC: 3 | RNVC: 2
STWA29-53: RNCC: 3 | RNVC: 2
STWA29-53: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-337-7767
Racc Corps Flottant

143377767
82284-1: RNCC: 3 | RNVC: 2
650-485-269-0: RNCC: 5 | RNVC: 2

6 Nov 1976

4730-14-461-0681
Pipe Flange

144610681
3500492BRIDE1"1/4GAZ MOD24: RNCC: 3 | RNVC: 2

22 Feb 1993

4730-14-210-2891
Bouchon Special

142102891
613-403-005-0: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-549-6043
Hydraulic System Accessories Manifold

145496043
G03-01682-3: RNCC: 3 | RNVC: 2
EA2-21766.0: RNCC: 5 | RNVC: 2

21 Apr 2006

4730-14-257-4597
Sediment Strainer Element

142574597
8908DCSEA/EQP PIECE 8: RNCC: 2 | RNVC: 2
ECEMAT142-3020: RNCC: 5 | RNVC: 2
8908DCSEA PIECE8: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-224-3839
Fluid Passage Bolt

142243839
9409993702: RNCC: 3 | RNVC: 2
0003019167: RNCC: 5 | RNVC: 2
29-9-043767-0: RNCC: 5 | RNVC: 2
43767: RNCC: 5 | RNVC: 2
DLT032457: RNCC: 5 | RNVC: 2
0003019167: RNCC: 5 | RNVC: 9
0941568045: RNCC: 5 | RNVC: 9
3019167: RNCC: 5 | RNVC: 9
941568045: RNCC: 5 | RNVC: 9
DLT32457: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-253-7865

4730-14-295-2023

4730-14-359-6464
Tube To Boss Straight Adapter

143596464
207397: RNCC: 3 | RNVC: 2
8472073970: RNCC: 3 | RNVC: 2
207397-000: RNCC: 5 | RNVC: 2
0003040906: RNCC: 5 | RNVC: 2
0003040906: RNCC: 5 | RNVC: 9
3040906: RNCC: 5 | RNVC: 9

15 Oct 1979

4730-14-485-8161
Pipeline Flexible Spacer

144858161
99A3-17A: RNCC: 3 | RNVC: 2

13 Feb 1997

4730-14-378-1228
Quick Disconnect Coupling Half

143781228
106051201: RNCC: 3 | RNVC: 2
6050D3-2H: RNCC: 5 | RNVC: 2

20 Jul 1982

4730-14-323-3577
Thru-Hull Connector

143233577
741MA0006: RNCC: 3 | RNVC: 2
741MA006: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-329-2800
Pipeline Flexible Spacer

143292800
I131NTH50STR: RNCC: 2 | RNVC: 2
DILNTH50STR: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-497-6395
Tube To Boss Straight Adapter

144976395
5M1072: RNCC: 3 | RNVC: 2
F300 0T 023 4439: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-525-6329
Tube Tee

145256329
20 236 915 5160: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-326-2340
Raccord Diaphragme

143262340
501-777-068-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-494-0272
Tube To Gas Fitting Straight Adapter

144940272
6038: RNCC: 3 | RNVC: 2
AT13-12X17C0: RNCC: 5 | RNVC: 2
SOA6038: RNCC: 5 | RNVC: 9
SOAAT13-12X17C0: RNCC: 5 | RNVC: 9
F300 0T 015 0896: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-262-8432
Raccord De Reductio

142628432
29-2-134646-0: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-522-7914
Hose To Grooved Clamp Coupling Straight Adapter

145227914
EBB12/16: RNCC: 3 | RNVC: 2
EBB12/16: RNCC: 5 | RNVC: 9

23 Nov 2000

4730-14-484-7769
Quick Disconnect Coupling Half

144847769
SKK20-12SPK: RNCC: 3 | RNVC: 2

5 Dec 1996

4730-14-252-3031
Fluid Pressure Line Multiple Connector

142523031
NO PRIMARY REF14-252-3031: RNCC: 3 | RNVC: 2
223727: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-314-1694
Tube To Boss Straight Adapter

143141694
12-20-16-23CYL: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-356-7400
Tube To Boss Straight Adapter

143567400
3130S78-15-195: RNCC: 3 | RNVC: 2
85-689-8757: RNCC: 6 | RNVC: 9

15 May 1979

4730-14-501-2353
Tube To Boss Straight Adapter

145012353
471-042: RNCC: 3 | RNVC: 2
471.042: RNCC: 3 | RNVC: 2
F300 0T 025 2758: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-488-3013
Fluid Flow Restrictor

144883013
573594-23: RNCC: 3 | RNVC: 2

29 Apr 1997

4730-14-384-2942
Quick Disconnect Wye

143842942
RBE11-8104: RNCC: 3 | RNVC: 2

4 May 1983

4730-14-433-4292
Tube To Hose Straight Adapter

144334292
31010610: RNCC: 3 | RNVC: 2
5005330087: RNCC: 5 | RNVC: 2
222-9225: RNCC: 5 | RNVC: 2

25 Jul 1989

4730-14-440-1218
Bride A Zinc

144401218
MAT162-0117F2: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-412-4150
Fluid Pressure Line Multiple Connector

144124150
ES109-53: RNCC: 3 | RNVC: 2

15 Oct 1986

4730-14-495-6280
Union

144956280
U48375-85: RNCC: 3 | RNVC: 2
F300 0T 019 5560: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-371-2728
Tube Tee

143712728
97-12NU: RNCC: 3 | RNVC: 2
5005030163: RNCC: 5 | RNVC: 2
5005030163: RNCC: 6 | RNVC: 9

5 Aug 1981

4730-14-320-7104
Bulkhead Hose Connector

143207104
121E77-100-18-0M1: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-281-7281
Tube Repair Plug

142817281
NO PRIMARY REF14-281-7281: RNCC: 3 | RNVC: 2
234-40BT38F0UGA: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-315-1507
Flange To Tube Straight Adapter

143151507
M10-72-25: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-283-5531
Raccord

142835531
614F18R90: RNCC: 3 | RNVC: 2
85-623-2680: RNCC: 6 | RNVC: 9

1 Jan 1972

4730-14-567-2414
Tube Elbow

145672414
ASNA3764-0806: RNCC: 1 | RNVC: 2
PE20212J-0806: RNCC: 3 | RNVC: 2
ASNA3764-0806: RNCC: 5 | RNVC: 2

24 Feb 2011

4730-14-491-6724
Fluid Passage Bolt

144916724
NO PRIMARY REF14-491-6724: RNCC: 3 | RNVC: 2
618-14: RNCC: 5 | RNVC: 9
F300 0T 003 8754: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-339-9768
Swivel Retaining Pipe Flange

143399768
GSM171-001F13: RNCC: 3 | RNVC: 2
GSM171-01F13: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-340-7748
Swivel Retaining Pipe Flange

143407748
MAT178-0119F11: RNCC: 3 | RNVC: 2
GSM772-01F17: RNCC: 5 | RNVC: 2
GSM772-001F17: RNCC: 5 | RNVC: 2

14 Feb 1977

4730-14-489-9900
Tube Coupling

144899900
307-095-931-0: RNCC: 3 | RNVC: 2

3 Sep 1997

4730-14-395-0356
Flange To Tube Elbow

143950356
303-964-102-0: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-297-6925
Tube To Boss Straight Adapter

142976925
G1213-16X150: RNCC: 3 | RNVC: 2
UMAG13-16X150N: RNCC: 3 | RNVC: 2
4AG13-16X150: RNCC: 3 | RNVC: 2
G12-13-16X150: RNCC: 5 | RNVC: 2
99-621-13-164-1: RNCC: 5 | RNVC: 2
99621131641: RNCC: 5 | RNVC: 2
81645: RNCC: 5 | RNVC: 2
84081: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-557-4770
Pipe To Hose Straight Adapter

145574770
82402586000: RNCC: 3 | RNVC: 2
002-3008-000: RNCC: 5 | RNVC: 2

12 Jun 2008

4730-14-212-7720

4730-14-202-3726

4730-14-040-0616
Bouchon A Clapet

140400616
01980200000NZ0A: RNCC: 3 | RNVC: 2
P8127B: RNCC: 5 | RNVC: 2
67-024-011-00: RNCC: 5 | RNVC: 2
3873B: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-233-0580

4730-14-411-5438
Te

144115438
520180: RNCC: 3 | RNVC: 2

20 Aug 1986

4730-14-255-0964

4730-14-350-3132
Bride Reservoir

143503132
A4H14358: RNCC: 3 | RNVC: 2

14 Jun 1978

4730-14-335-8360

4730-14-562-9541
Quick Disconnect Coupling Half

145629541
5010616366: RNCC: 3 | RNVC: 2
20951566: RNCC: 5 | RNVC: 2

8 Dec 2009

4730-14-230-6645

4730-14-298-0200

Load More Results