What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 171 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 171 of 185

4730-14-247-1869
Coude Pour Tube

142471869
JBA04-23: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-257-2122
Raccord Detancheite

142572122
330A75-4301-00: RNCC: 3 | RNVC: 2
330A75-4301-0000: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-338-3337
Raccordement Coude

143383337
A0412-004F4: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-477-9821
Fluid Pressure Line Multiple Connector

144779821
853-700-854-0: RNCC: 3 | RNVC: 2

4 Oct 1995

4730-14-369-6336
Quick Disconnect Coupling Half

143696336
PSA06-6806/1: RNCC: 3 | RNVC: 2
PSA06-6806-1: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-391-6502
Quick Disconnect Coupling Half

143916502
RBE11-6103-4-5: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-290-9993
Tube Coupling

142909993
623-152-4: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-256-0965
Tube To Boss Straight Adapter

142560965
UMAG27X3-4BGSN: RNCC: 3 | RNVC: 2
MG27-12B: RNCC: 3 | RNVC: 2
G12-27 3-4BGS: RNCC: 3 | RNVC: 2
4AG27 3-4BGS: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-506-6545
Tube Coupling

145066545
NO PRIMARY REF14-506-6545: RNCC: 3 | RNVC: 2
K9162-4-10-0: RNCC: 5 | RNVC: 9

5 May 1998

4730-14-369-6339
Quick Disconnect Coupling Half

143696339
PSP06-6810/LD: RNCC: 3 | RNVC: 2
PSP06-6809-1: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-293-1758
Tube To Boss Straight Adapter

142931758
9105081366: RNCC: 3 | RNVC: 2
CA2-8-8-13C0: RNCC: 5 | RNVC: 9
CA2-8-8X13BSPC0S: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-247-9871

4730-14-032-1543
Contre Bride

140321543
CMT30E9030AF3DE25REP4: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-547-1920
Tube To Gas Fitting Straight Adapter

145471920
82420808: RNCC: 3 | RNVC: 2

4 Oct 2005

4730-14-536-5791
Hose To Boss Straight Adapter

145365791
DA8538: RNCC: 3 | RNVC: 2

2 Sep 2003

4730-14-343-0899
Tube To Boss Straight Adapter

143430899
45701B: RNCC: 3 | RNVC: 9
2333BIS: RNCC: 5 | RNVC: 9

16 Jun 1977

4730-14-516-8669
Tube To Gas Fitting Straight Adapter

145168669
01140810: RNCC: 3 | RNVC: 2

20 Oct 1999

4730-14-547-9138
Tube To Boss Straight Adapter

145479138
291533: RNCC: 3 | RNVC: 2
291533: RNCC: 5 | RNVC: 2
SYQ6168: RNCC: 5 | RNVC: 2

24 Nov 2005

4730-14-345-7331
Pipe Expansion Joint

143457331
24153090100: RNCC: 3 | RNVC: 2
241530901: RNCC: 5 | RNVC: 9
603901: RNCC: 5 | RNVC: 9

5 Oct 1977

4730-14-541-1346
Tube Coupling Inverted Nut

145411346
3172P051: RNCC: 3 | RNVC: 2
3172P051: RNCC: 3 | RNVC: 2

14 May 2004

4730-14-403-0518
Tube To Boss Straight Adapter

144030518
29739316: RNCC: 3 | RNVC: 2
29739316: RNCC: 5 | RNVC: 9

25 Jul 1985

4730-14-445-1620
Fluid Passage Bolt

144451620
574385: RNCC: 3 | RNVC: 2

4 Feb 1991

4730-14-350-6028
Tube To Boss Straight Adapter

143506028
100-379: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-523-6811
Tube To Boss Straight Adapter

145236811
K4037544: RNCC: 3 | RNVC: 2

31 Jan 2001

4730-14-285-9665
Fluid Passage Bolt

142859665
15145412: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-515-3844
Tube To Boss Straight Adapter

145153844
6200056: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-032-1577
Pipe Flange

140321577
CMT30E9030AF5ET6DE8REP2: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-508-7201
Tube Coupling

145087201
06430P020009: RNCC: 3 | RNVC: 2

29 Sep 1998

4730-14-509-1016
Tube Coupling

145091016
01346017: RNCC: 3 | RNVC: 2
19203231: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-503-2025
Hose Coupling Assembly

145032025
RP1A500053400: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-284-5700
Pipe Flange

142845700
0249970060: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-444-7719
Tube To Gas Fitting Straight Adapter

144447719
0RSCA25X20-27DTCW12: RNCC: 3 | RNVC: 2
LW177CW6143N: RNCC: 5 | RNVC: 2

21 Jan 1991

4730-14-423-6400
Lubrication Fitting

144236400
162201: RNCC: 3 | RNVC: 2

21 Apr 1988

4730-14-568-5172
Tube Tee

145685172
2451 710 S: RNCC: 3 | RNVC: 2

9 Jun 2011

4730-14-496-9510
Fluid Passage Bolt

144969510
12270254: RNCC: 3 | RNVC: 2
F300 0T 022 3094: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-375-8803
Fluid Passage Bolt

143758803
2433590001: RNCC: 3 | RNVC: 2
2433590001: RNCC: 5 | RNVC: 2
FEPRS1G1Z: RNCC: 5 | RNVC: 9

30 Mar 1982

4730-14-366-7840
Tube To Boss Straight Adapter

143667840
923456: RNCC: 3 | RNVC: 2
923456: RNCC: 5 | RNVC: 9

20 Nov 1980

4730-14-488-5934
Tube Coupling Assembly

144885934
3901S45A: RNCC: 3 | RNVC: 2
3901S45A: RNCC: 5 | RNVC: 2

21 May 1997

4730-14-433-2671
Fluid Pressure Line Multiple Connector

144332671
WH6PLMA3C: RNCC: 3 | RNVC: 2
WH06PLMA3C: RNCC: 5 | RNVC: 2

18 Jul 1989

4730-14-452-5644
Pipe Flange

144525644
LN320033DN300: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-554-7082
Tube To Boss Straight Adapter

145547082
18878: RNCC: 3 | RNVC: 2

7 Aug 2007

4730-14-561-6269
Pipe Flange

145616269
422698V: RNCC: 3 | RNVC: 2

10 Aug 2009

4730-14-333-8714

4730-14-295-3072
Raccord Prise Tempe

142953072
177336: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-460-8253
Tube Union

144608253
RACUNION-1984-EMMCAT-CR.MARION-: RNCC: 3 | RNVC: 2

10 Feb 1993

4730-14-555-8469
Tube Coupling

145558469
NO PRIMARY REF 14-555-8469: RNCC: 3 | RNVC: 2
CMP428304: RNCC: 5 | RNVC: 2

18 Dec 2007

4730-14-405-9979
Quick Disconnect Coupling Assembly

144059979
CMT30E9047B-8ABRONZE UE12: RNCC: 3 | RNVC: 2

20 Dec 1985

4730-14-472-1557
Pipeline Flexible Spacer

144721557
30339-08: RNCC: 3 | RNVC: 2

11 Oct 1994

4730-14-385-2034
Tube To Boss Straight Adapter

143852034
AML18M20X150: RNCC: 3 | RNVC: 2
20702600: RNCC: 5 | RNVC: 2
AL18-20-150: RNCC: 5 | RNVC: 2
AML18M20-150: RNCC: 5 | RNVC: 2

26 Jul 1983

4730-14-505-1313
Sediment Strainer Element

145051313
B1BAFVI1UD5SLDRWX67-140X170X12: RNCC: 3 | RNVC: 2
164601: RNCC: 3 | RNVC: 2

11 Mar 1998

4730-14-456-6143
Fluid Pressure Line Multiple Connector

144566143
071234013008013: RNCC: 3 | RNVC: 2
85-694-4151: RNCC: 6 | RNVC: 9

9 Jul 1992

4730-14-271-8812
Raccord Intermediai

142718812
NO PRIMARY REF14-271-8812: RNCC: 3 | RNVC: 2
20183: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-483-6166
Bouchon

144836166
909871-303: RNCC: 3 | RNVC: 2
909871-303: RNCC: 5 | RNVC: 2
909871-303: RNCC: 5 | RNVC: 9

25 Sep 1996

4730-14-410-8869
Quick Disconnect Coupling Half

144108869
RBE11-7104/IC/JE: RNCC: 3 | RNVC: 2
RBE11-7104ICJE: RNCC: 5 | RNVC: 2

23 Jul 1986

4730-14-343-2828
Pipe Flange

143432828
NO PRIMARY REF14-343-2828: RNCC: 3 | RNVC: 2
3511-314-33151: RNCC: 5 | RNVC: 9

16 Jun 1977

4730-14-321-9658
Pipe Flange

143219658
MAT147-0043F4: RNCC: 3 | RNVC: 2
GSM147-004F8: RNCC: 3 | RNVC: 9
MAT147-0044: RNCC: 4 | RNVC: 1
GSM147-04F8: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-279-8239
Self-Sealing Coupling Assembly

142798239
X353169: RNCC: 3 | RNVC: 2
X353169-0079576: RNCC: 3 | RNVC: 2
X353169-79576: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-347-2189
Tube To Boss Straight Adapter

143472189
GSM164-014F56: RNCC: 3 | RNVC: 2
GSM164-14F56: RNCC: 5 | RNVC: 2

19 Jan 1978

4730-14-343-7188
Tube Tee

143437188
1809-25-26-34CYLNN: RNCC: 3 | RNVC: 2
T0RSA25X26-34N: RNCC: 3 | RNVC: 2
105A25-26-34CYL: RNCC: 3 | RNVC: 2

13 Jul 1977

4730-14-379-9704
Quick Disconnect Coupling Half

143799704
RBE08-2102/IC/FB: RNCC: 3 | RNVC: 2
RBE08-2102IC/FB: RNCC: 5 | RNVC: 2

20 Oct 1982

4730-14-320-7309
Tube To Boss Straight Adapter

143207309
A580-092: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-438-7402
Pipe Joint Welding Ring

144387402
LN324-079REP04: RNCC: 3 | RNVC: 2
LN324-079F6REP04: RNCC: 5 | RNVC: 2

3 Apr 1990

4730-14-327-4694
Crepine Assechement

143274694
GSM145-015F4ET22: RNCC: 3 | RNVC: 2
MAT145-0101: RNCC: 3 | RNVC: 2
401MA225F11ACIER: RNCC: 5 | RNVC: 2
GSM145-003F4: RNCC: 5 | RNVC: 2
GSM145-03F4: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-376-1562
Tube To Boss Straight Adapter

143761562
502301B: RNCC: 3 | RNVC: 2
85-692-1755: RNCC: 6 | RNVC: 9

30 Mar 1982

4730-14-390-6279
Tube Fitting Clinch Sleeve

143906279
RCN11-12-00: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-485-2982
Flange To Tube Elbow

144852982
RA1M525001140: RNCC: 3 | RNVC: 2

15 Jan 1997

4730-14-556-2269
Quick Disconnect Coupling Half

145562269
240 43 00048: RNCC: 3 | RNVC: 2

14 Feb 2008

4730-14-419-7799
Tube To Boss Straight Adapter

144197799
160H702501-371: RNCC: 3 | RNVC: 2

5 Nov 1987

4730-14-541-9057
Fluid Pressure Line Multiple Connector

145419057
SC021021: RNCC: 3 | RNVC: 2
RO20: RNCC: 5 | RNVC: 9
RO2013: RNCC: 5 | RNVC: 9

2 Jul 2004

4730-14-374-7765
Bulkhead Hose Connector

143747765
0000361930: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-292-7467
Threaded Tube Fitting Plug

142927467
S02013: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-457-7885
Tube Tee

144577885
FF1898T1616S: RNCC: 3 | RNVC: 2

23 Sep 1992

4730-14-504-0213
Exhaust-Intake Pneumatic Muffler

145040213
11297: RNCC: 3 | RNVC: 2

4 Feb 1998

4730-14-526-4803
Flange To Hose Straight Adapter

145264803
03170000108159C: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-388-6090
Hose To Boss Straight Adapter

143886090
MBEU60312: RNCC: 3 | RNVC: 2
033672: RNCC: 5 | RNVC: 2

3 Nov 1983

4730-14-205-0552
Tube Tee

142050552
RA6506: RNCC: 3 | RNVC: 2
277168: RNCC: 5 | RNVC: 2
277168: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-272-2583
Fluid Passage Bolt

142722583
0000290220: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-279-0523
Tube Tee

142790523
NO PRIMARY REF14-279-0523: RNCC: 3 | RNVC: 2
CAR7-14-10-14: RNCC: 5 | RNVC: 9
CAR7-14-10-14HP: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-387-5690
Quick Disconnect Coupling Assembly

143875690
H8-62/H8-63: RNCC: 3 | RNVC: 2
H8-62/H8-63: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-208-8999
Raccordsouple Equi

142088999
AF20-75-4X: RNCC: 3 | RNVC: 2
HBT10DN20: RNCC: 5 | RNVC: 1

1 Jan 1964

4730-14-394-6309
Tube To Boss Straight Adapter

143946309
169-05C: RNCC: 3 | RNVC: 2
85-692-5027: RNCC: 6 | RNVC: 9

28 Aug 1984

4730-14-462-2040
Hose To Gas Fitting Straight Adapter

144622040
MAT132-01-01: RNCC: 3 | RNVC: 2

15 Apr 1993

4730-14-429-5802
Tube To Boss Straight Adapter

144295802
4A10-14X150C0NU: RNCC: 3 | RNVC: 2
204105158: RNCC: 5 | RNVC: 2
5005030059: RNCC: 5 | RNVC: 2

1 Feb 1989

4730-14-353-2027
Tube To Boss Straight Adapter

143532027
1DM12-12-17CYL: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-302-9915
Tube To Boss Straight Adapter

143029915
7062BB1B1966VCPT2-14UA9C337: RNCC: 2 | RNVC: 2
24119004300: RNCC: 3 | RNVC: 2
119J43: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-305-8368
Sediment Strainer Element

143058368
554-410-124: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-248-1468
Raccord Droit De Bo

142481468
NO PRIMARY REF14-248-1468: RNCC: 3 | RNVC: 2
210200: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-253-8486
Vis Creuse Pour Tuy

142538486
NO PRIMARY REF14-253-8486: RNCC: 3 | RNVC: 2
53J59: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-257-2563
Tube To Boss Straight Adapter

142572563
702A30-0709-20: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-371-4795
Tube To Boss Straight Adapter

143714795
P4-1DM12-8-13CYL: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-350-2709
Tube To Boss Straight Adapter

143502709
9101494901: RNCC: 3 | RNVC: 2
A3-48-3-40X49BSPCYL: RNCC: 5 | RNVC: 9

14 Jun 1978

4730-14-303-0036
Tube Fitting Brazing Ferrule

143030036
GSM163-011REP41-5-1F6: RNCC: 3 | RNVC: 2
GSM163-11AREP41-5-1: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-216-1562
Bouchon Special

142161562
A1-73570: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-305-2196
Tube To Hose Straight Adapter

143052196
UMCA10X8-13NU: RNCC: 3 | RNVC: 2
4A10-8-13CONU: RNCC: 3 | RNVC: 2
12-10-8-13CONU: RNCC: 3 | RNVC: 2
12-10-8-13C0NU: RNCC: 5 | RNVC: 2
360645016: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-367-7842

4730-14-225-1039

4730-14-558-8754
Tube To Boss Elbow

145588754
V40XS12-3/8: RNCC: 3 | RNVC: 2
V40XS12-3/8: RNCC: 5 | RNVC: 2

18 Nov 2008

4730-14-480-4626
Quick Disconnect Coupling Assembly

144804626
AE99145E: RNCC: 3 | RNVC: 2
AE99145E: RNCC: 5 | RNVC: 9

13 Mar 1996

4730-14-538-9658
Return Tube Bend

145389658
NGM0053224404228: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-418-0523
Fluid Pressure Line Multiple Connector

144180523
1557-49: RNCC: 3 | RNVC: 9
543258: RNCC: 5 | RNVC: 2
7932567449: RNCC: 5 | RNVC: 9

6 Aug 1987

4730-14-492-2480
Tube To Boss Straight Adapter

144922480
0003435059: RNCC: 3 | RNVC: 2
F300 0T 007 2297: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-423-7684
Fuel Feeder Manifold

144237684
3556010000: RNCC: 3 | RNVC: 2
5172043300: RNCC: 5 | RNVC: 2
3556010000: RNCC: 5 | RNVC: 9
720433: RNCC: 5 | RNVC: 9

28 Apr 1988

4730-14-451-6260
Fluid-Emulsion Spray Nozzle

144516260
BGW2100: RNCC: 3 | RNVC: 2
ITHH14W: RNCC: 3 | RNVC: 9
BGW2100: RNCC: 5 | RNVC: 9

27 Nov 1991

4730-14-444-7443
Tube To Boss Straight Adapter

144447443
123621303: RNCC: 3 | RNVC: 9

21 Jan 1991

4730-14-518-8479
Quick Disconnect Coupling Half

145188479
NBB.106: RNCC: 3 | RNVC: 2

23 Feb 2000

4730-14-500-4798
Tube Coupling

145004798
JR2020: RNCC: 3 | RNVC: 2
F300 0T 024 4968: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-435-1796
Tube Tee

144351796
5130: RNCC: 3 | RNVC: 2

24 Oct 1989

4730-14-280-3243
Sediment Strainer Element

142803243
401788T2: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-543-8603
Tube To Boss Straight Adapter

145438603
560503364: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-262-1663

4730-14-341-4085

4730-14-287-7512

4730-14-576-8215
Flange To Tube Elbow

145768215
M4811341200000: RNCC: 3 | RNVC: 2

17 Jul 2013

4730-14-408-4479
Tube Union

144084479
LV100-NS06S: RNCC: 3 | RNVC: 2
89060600NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-567-2571
Quick Disconnect Coupling Half

145672571
10 404 80: RNCC: 3 | RNVC: 2

25 Feb 2011

4730-14-346-6658
Tube Union

143466658
NO PRIMARY REF14-346-6658: RNCC: 3 | RNVC: 2
4508922A: RNCC: 5 | RNVC: 9

12 Dec 1977

4730-14-391-7187
Raccord Sige Mobile

143917187
435-040: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-563-3421
Quick Disconnect Coupling Half

145633421
RBE06.1103/IC/DG: RNCC: 3 | RNVC: 2

28 Jan 2010

4730-14-562-2577
Threaded Tube Fitting Plug

145622577
SBE1365: RNCC: 3 | RNVC: 2

12 Oct 2009

4730-14-569-5955
Tube To Hose Straight Adapter

145695955
3444591: RNCC: 3 | RNVC: 2

3 Oct 2011

4730-14-212-5631

4730-14-346-7089
Bride Speciale

143467089
6784-1DR38: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-301-9243

4730-14-377-9025
Tube-Hose Fitting Compression Sleeve

143779025
SS204-1: RNCC: 3 | RNVC: 9

10 Jun 1982

4730-14-365-9791

4730-14-504-8359
Tube Coupling Nut Assembly

145048359
K-N10VT: RNCC: 3 | RNVC: 2
9560146540: RNCC: 5 | RNVC: 2

4 Mar 1998

4730-14-455-9697
Tube To Boss Straight Adapter

144559697
PM1A747557010A1: RNCC: 3 | RNVC: 2
PM1A747557010A1: RNCC: 5 | RNVC: 2

11 Jun 1992

4730-14-572-3480
Lubrication Fitting

145723480
15915: RNCC: 3 | RNVC: 2

27 Jun 2012

4730-14-373-8836
Quick Disconnect Coupling Half

143738836
RBE3-2100-0D6DKB: RNCC: 3 | RNVC: 2
91463279: RNCC: 5 | RNVC: 2

8 Dec 1981

4730-14-351-4605
Tube To Boss Straight Adapter

143514605
73-072-090: RNCC: 3 | RNVC: 2

12 Sep 1978

4730-14-262-1693
Pipe Flange

142621693
7062DL1F1M48-5XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-362-6279
Bulkhead Hose Connector

143626279
EA1M743-004: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-492-1173
Tube To Boss Straight Adapter

144921173
NO PRIMARY REF14-492-1173: RNCC: 3 | RNVC: 2
19-0067: RNCC: 5 | RNVC: 9
F300 0T 006 9640: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-342-7657
Bouchon Obturateur

143427657
NG414-01-28FEMELLE: RNCC: 3 | RNVC: 2

16 May 1977

4730-14-495-4178
Union

144954178
K32375-81: RNCC: 3 | RNVC: 2
F300 0T 019 2313: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-564-5187
Tube Elbow

145645187
EW35LOMDCF: RNCC: 3 | RNVC: 2
A231004000273: RNCC: 5 | RNVC: 2

4 May 2010

4730-14-368-1694
Tube To Boss Straight Adapter

143681694
00 151 06 06: RNCC: 3 | RNVC: 2
4781-6-6: RNCC: 5 | RNVC: 9

20 Feb 1981

4730-14-382-0668
Tube To Boss Straight Adapter

143820668
6-8F4OMXS: RNCC: 3 | RNVC: 2
F40XS10 1-2: RNCC: 5 | RNVC: 2
F40XS10-1-2: RNCC: 5 | RNVC: 2
AS62228/4: RNCC: 5 | RNVC: 2

25 Jan 1983

4730-14-261-3897
Bouchon Special

142613897
77827: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-507-6769
Tube Union

145076769
400002100280: RNCC: 3 | RNVC: 2
40 000 210 0280: RNCC: 5 | RNVC: 2

12 Aug 1998

4730-14-276-8644
Siege Purgeur

142768644
5531DREPC: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-563-8678
Tube Union

145638678
WNPMB6: RNCC: 3 | RNVC: 2
WNPMB6: RNCC: 5 | RNVC: 2

23 Mar 2010

4730-14-570-8582
Tube Nipple

145708582
AMSPCT 42 42: RNCC: 3 | RNVC: 2
AMSPCT 42 42: RNCC: 5 | RNVC: 2

30 Jan 2012

4730-14-273-5241

4730-14-283-5509

4730-14-321-1826

4730-14-387-8867
Tube Tee

143878867
713 D 25 25 25: RNCC: 3 | RNVC: 2
P165D252525: RNCC: 3 | RNVC: 2
713D25 25 25: RNCC: 5 | RNVC: 2
713D25-25-25: RNCC: 5 | RNVC: 2
713D252525: RNCC: 5 | RNVC: 2
74713D252525: RNCC: 5 | RNVC: 2
74713D252525: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-366-3777
Tube To Boss Straight Adapter

143663777
42-8-12-17C0NU: RNCC: 3 | RNVC: 2
0024331111: RNCC: 5 | RNVC: 2
0024331111: RNCC: 5 | RNVC: 9

20 Nov 1980

4730-14-400-4488
Fluid Passage Bolt

144004488
NO PRIMARY REF14-400-4488: RNCC: 3 | RNVC: 2
2-538244-2: RNCC: 5 | RNVC: 9

24 Apr 1985

4730-14-359-5850
Tube To Boss Straight Adapter

143595850
9DM8-5-10CYL: RNCC: 3 | RNVC: 2
5000497348: RNCC: 5 | RNVC: 2
5000497348: RNCC: 5 | RNVC: 9
5000497348: RNCC: 6 | RNVC: 9

15 Oct 1979

4730-14-421-7608
Quick Disconnect Coupling Half

144217608
96162469: RNCC: 3 | RNVC: 2
RBE062151IA3-FB-D-KB: RNCC: 5 | RNVC: 1
96162469: RNCC: 5 | RNVC: 9

27 Jan 1988

4730-14-367-5080
Fluid Pressure Line Multiple Connector

143675080
F31637-3-2+B: RNCC: 3 | RNVC: 2
F31637-3-2B: RNCC: 5 | RNVC: 2

19 Jan 1981

4730-14-551-6856
Water Feeder Manifold

145516856
RAMQ18114X0V: RNCC: 3 | RNVC: 2

16 Oct 2006

4730-14-552-5946
Hose To Boss Straight Adapter

145525946
6501MPA009C: RNCC: 3 | RNVC: 2

18 Jan 2007

4730-14-388-1714
Tube To Boss Straight Adapter

143881714
89210813: RNCC: 3 | RNVC: 2

12 Oct 1983

4730-14-410-7124
Tube To Boss Straight Adapter

144107124
160H702501-286: RNCC: 3 | RNVC: 2

9 Jul 1986

4730-14-354-6762
Fluid Pressure Line Multiple Connector

143546762
53NC402584: RNCC: 3 | RNVC: 2

31 Jan 1979

4730-14-223-1723
Vis Raccord Tube

142231723
D2604-7-106: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-418-6199
Bague Pour Collier

144186199
MAT169-0001F14DE48,3: RNCC: 3 | RNVC: 2

7 Sep 1987

4730-14-247-2341
Union Double Specia

142472341
152187: RNCC: 3 | RNVC: 2
R078505-15: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-221-2180
Raccord A Joint Cou

142212180
GSM1297FE6-1TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-365-6614
Tube-Hose Fitting Compression Sleeve

143656614
NO PRIMARY REF14-365-6614: RNCC: 3 | RNVC: 2
6-50G: RNCC: 5 | RNVC: 9
6-50GR: RNCC: 5 | RNVC: 9

8 Oct 1980

4730-14-203-1154
Lubricating Oil Cup

142031154
E28-201-3: RNCC: 2 | RNVC: 2
CLICCLAC4-10X150: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-14-392-7178
Hose To Boss Straight Adapter

143927178
9DM-12-5-10CONU: RNCC: 3 | RNVC: 2
5A12L-510CONU: RNCC: 3 | RNVC: 2
5000165797: RNCC: 5 | RNVC: 2

7 Apr 1984

4730-14-571-9306
Adapter Bushing

145719306
14003562: RNCC: 3 | RNVC: 2

24 May 2012

4730-14-277-1338

4730-14-375-7132

4730-14-251-5607

4730-14-261-3893
Bouchon Special

142613893
75316: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-320-2689

4730-14-573-5376
Hose Tee

145735376
2410 714 S: RNCC: 3 | RNVC: 2

19 Oct 2012

4730-14-316-8521
Pipe Flange

143168521
30041: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-414-2014
Hose To Boss Straight Adapter

144142014
213425: RNCC: 3 | RNVC: 2

22 Jan 1987

4730-14-433-8560
Tube Coupling

144338560
564259: RNCC: 3 | RNVC: 2

17 Aug 1989

4730-14-226-8828

4730-14-567-4184
Tube Elbow

145674184
725 T 16 16S Z4: RNCC: 3 | RNVC: 2
725T1616SZ4: RNCC: 5 | RNVC: 2

15 Mar 2011

4730-14-342-0589
Quick Disconnect Coupling Half

143420589
RBE19-1155: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-509-1815
Tube To Boss Straight Adapter

145091815
KQK06-U02: RNCC: 3 | RNVC: 2
ND1651: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-206-8357
Lubrication Fitting

142068357
NO PRIMARY REF14-206-8357: RNCC: 3 | RNVC: 2
GG36-08-125LAIT0N: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-031-0633
Tube To Boss Straight Adapter

140310633
9101168051: RNCC: 3 | RNVC: 2
9401168058: RNCC: 5 | RNVC: 2
VDP4669: RNCC: 5 | RNVC: 2
A1-16-20-150-51: RNCC: 5 | RNVC: 9

14 Jun 1980

4730-14-347-2250
Coulisseau

143472250
NO PRIMARY REF14-347-2250: RNCC: 3 | RNVC: 2
15D83P421-60: RNCC: 5 | RNVC: 9

19 Jan 1978

4730-14-256-0643
Tube To Boss Straight Adapter

142560643
MG13-4B: RNCC: 3 | RNVC: 2
G12-13 1-4BGS: RNCC: 3 | RNVC: 2
UMAG13X1-4BGSN: RNCC: 3 | RNVC: 2
4AG13 1-4BGS: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-362-1792
Fluid Pressure Line Multiple Connector

143621792
IN308-12-90AJ: RNCC: 3 | RNVC: 2
RU47055A: RNCC: 5 | RNVC: 2
RU47055: RNCC: 5 | RNVC: 2
RU47055A: RNCC: 5 | RNVC: 2
RU47055: RNCC: 5 | RNVC: 9

20 Feb 1980

4730-14-389-5142
Bulkhead Hose Connector

143895142
365A75-2621-01: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-277-2806
Tube Tee

142772806
Q1-5TR36X36X14NN: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-234-5728
Ecrou De Presse-Eto

142345728
321A22-0486-20: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-388-5087
Raccord De Valve

143885087
AL01W99-278: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-496-4170
Tube To Boss Straight Adapter

144964170
203047: RNCC: 3 | RNVC: 2
F300 0T 021 5071: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-494-5548
Tube To Boss Straight Adapter

144945548
643 486 15: RNCC: 3 | RNVC: 2
F300 0T 017 4728: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-292-1796
Pipeline Flexible Spacer

142921796
MX86-1-75-12BAR: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-310-4138
Fluid Passage Bolt

143104138
2-140841-6: RNCC: 3 | RNVC: 2
2-140841-6: RNCC: 5 | RNVC: 9
140841: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-542-8955
Straight Tubing Connector

145428955
708010S220-02A: RNCC: 3 | RNVC: 2

14 Aug 2004

4730-14-324-7766
Tube Tee

143247766
GSM163-004F22AVECECROUSRACCORD: RNCC: 3 | RNVC: 2
GSM163-04F22AVECECR0USRACC0RD: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-228-6486
Tube Coupling

142286486
EN10242-M2-1/2-FE-A: RNCC: 2 | RNVC: 2
270 1-2: RNCC: 5 | RNVC: 2
770 270 104: RNCC: 5 | RNVC: 2
120419: RNCC: 5 | RNVC: 2
E29801M2D: RNCC: 5 | RNVC: 9
AFY3 1-2: RNCC: 5 | RNVC: 9
3 1-2: RNCC: 5 | RNVC: 9
905561: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-306-9282
Quick Disconnect Coupling Half

143069282
RBE11-2102DKB: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-483-2359
Quick Disconnect Coupling Half

144832359
212EPA67300-010A: RNCC: 3 | RNVC: 2

29 Aug 1996

4730-14-334-2661
Tube Tee

143342661
Q1-47-14Q3-105PQ1-5-404: RNCC: 3 | RNVC: 2

23 Apr 1976

4730-14-442-4575
Tube To Boss Straight Adapter

144424575
24049016000: RNCC: 3 | RNVC: 2
415043-B: RNCC: 5 | RNVC: 2

17 Oct 1990

4730-14-469-7431
Sediment Strainer Element

144697431
0044117050: RNCC: 3 | RNVC: 2

9 May 1994

4730-14-223-8687

4730-14-557-3862
Quick Disconnect Coupling Half

145573862
1034131: RNCC: 3 | RNVC: 2

5 Jun 2008

4730-14-513-9513
Diaphragme

145139513
85127010600: RNCC: 3 | RNVC: 2
571980: RNCC: 5 | RNVC: 2

20 Apr 1999

4730-14-558-5218
Tube Reducer

145585218
0163 17 13: RNCC: 3 | RNVC: 2
293-6658: RNCC: 5 | RNVC: 2

13 Oct 2008

4730-14-524-5307
Tube To Boss Straight Adapter

145245307
23S25008: RNCC: 3 | RNVC: 2

21 Mar 2001

4730-14-515-8806
Hose To Boss Straight Adapter

145158806
9926 EATSEA/MAT: RNCC: 3 | RNVC: 2

20 Aug 1999

4730-14-545-1083
Solder Type Tube Fitting Plug

145451083
R01901A: RNCC: 3 | RNVC: 2

17 Mar 2005

4730-14-418-2176
Tube To Boss Straight Adapter

144182176
0000252850: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-351-7980
Tube To Boss Straight Adapter

143517980
02142016700: RNCC: 3 | RNVC: 2
021420167: RNCC: 5 | RNVC: 2

12 Sep 1978

4730-14-405-5703
Fluid Pressure Line Multiple Connector

144055703
WHO15PLR: RNCC: 3 | RNVC: 2

4 Dec 1985

4730-14-255-1341
Raccord Droit De Bo

142551341
P00461-97: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-480-2150
Tube Tee

144802150
111-R--7/8X7/8X5/8: RNCC: 3 | RNVC: 2

28 Feb 1996

4730-14-491-6313
Graisseur

144916313
MT00-05-18: RNCC: 3 | RNVC: 2
F300 0T 003 7180: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-255-4261
Raccord Special

142554261
321A39-0126-20: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-416-4103
Tube To Boss Straight Adapter

144164103
F3BRAB10-3/8: RNCC: 3 | RNVC: 2
F3BRAB10-3/8: RNCC: 3 | RNVC: 9
F3BRA-B10-3/8-79639: RNCC: 5 | RNVC: 2

10 Jun 1987

4730-14-478-3863
Straight Tubing Connector

144783863
525.9263-1L: RNCC: 3 | RNVC: 2

26 Oct 1995

4730-14-389-6489
Quick Disconnect Coupling Assembly

143896489
LP012-0WR521: RNCC: 3 | RNVC: 9

20 Dec 1983

4730-14-281-0484
Raccord Ecrous Ense

142810484
511-410-129REPRC5GSM1363-1: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-304-4593
Raccord Alim Reacte

143044593
F522-17: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-426-7771
Tube Tee

144267771
4730HEING076,1X4,5-42,4X3,6: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-269-1903
Pipe Flange

142691903
7066CD1F168-3: RNCC: 2 | RNVC: 2
4730BB-168,3F: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-303-0032
Tube Fitting Brazing Ferrule

143030032
GSM163-011REP20-1F6: RNCC: 3 | RNVC: 2
GSM163-11AREP20-1: RNCC: 5 | RNVC: 2
GSM163-011REP20-1F6: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-308-9987
Tube To Boss Straight Adapter

143089987
1080610003: RNCC: 3 | RNVC: 2
108-18-14-1: RNCC: 5 | RNVC: 2
108-18-14-1: RNCC: 5 | RNVC: 2
1080610003: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-292-1794
Pipeline Flexible Spacer

142921794
MX86-1-40-12BAR: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-417-7715
Tube To Boss Straight Adapter

144177715
Q15GE14S1/4BSPNU: RNCC: 3 | RNVC: 2
8401141366NU: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-213-5712
Tube-Hose Fitting Compression Sleeve

142135712
6899-5615: RNCC: 3 | RNVC: 9

1 Jan 1964

4730-14-334-2524
Tube Tee

143342524
GSM163-017F22: RNCC: 3 | RNVC: 2
GSM163-17F22: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-370-4663
Quick Disconnect Coupling Half

143704663
23MEPK324500006PL2-REP1: RNCC: 3 | RNVC: 2
CMT30E9047PL2-REP1: RNCC: 5 | RNVC: 2
CMT30L9047PL2REP1: RNCC: 5 | RNVC: 2

18 May 1981

4730-14-305-6255
Tube Tee

143056255
9104210047: RNCC: 3 | RNVC: 2
I7-21HP: RNCC: 5 | RNVC: 9
I7-21: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-333-5064
Tube Tee

143335064
GSM164-006F8: RNCC: 3 | RNVC: 2
GSM164-06F8: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-305-8364

4730-14-349-7425

4730-14-556-7490
Pipe Nipple

145567490
8280 348: RNCC: 3 | RNVC: 2

8 Apr 2008

4730-14-207-0031
Vis Creuse De Fixat

142070031
NO PRIMARY REF14-207-0031: RNCC: 3 | RNVC: 2
8031-12: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-575-6752
Hose Clamp

145756752
S4629H13-127: RNCC: 1 | RNVC: 2
FX13107127C8HW4: RNCC: 3 | RNVC: 2
FX13M107-127HN: RNCC: 3 | RNVC: 9
FLEXMH107127: RNCC: 5 | RNVC: 9

23 Apr 2013

4730-14-043-1003
Tube To Boss Straight Adapter

140431003
702A30-0968-00: RNCC: 3 | RNVC: 2

10 Apr 1984

4730-14-207-0091
Raccord Orientable

142070091
NO PRIMARY REF14-207-0091: RNCC: 3 | RNVC: 2
49678: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-339-0963
Barillet Special

143390963
GSM523-026F3: RNCC: 3 | RNVC: 2
GSM523-26F3: RNCC: 5 | RNVC: 2

17 Dec 1976

4730-14-395-3169
Pipe Flange

143953169
CAA007-42,4MALE: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-424-0909
Tube To Hose Straight Adapter

144240909
NO PRIMARY REF14-424-0909: RNCC: 3 | RNVC: 2
532135: RNCC: 5 | RNVC: 9

11 May 1988

4730-14-269-0177
Croix Orientable

142690177
50309-30-26-34TF: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-284-6470
Quick Disconnect Coupling Half

142846470
E29-573MALE15X21FILETE: RNCC: 2 | RNVC: 2

1 Jan 1972

4730-14-268-5025
Return Tube Bend

142685025
A49180B60-3ASJ: RNCC: 2 | RNVC: 2
2D180-60-3MM: RNCC: 3 | RNVC: 2
E29-043-60-3MM180: RNCC: 5 | RNVC: 2
2D180-60-3MM: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-345-0203
Tube Tee

143450203
3019349: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-317-2977
Tube To Boss Straight Adapter

143172977
SBE381: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-438-0057
Tube To Hose Straight Adapter

144380057
4A12L16X150C0: RNCC: 3 | RNVC: 2
104105188: RNCC: 5 | RNVC: 2
5000819371: RNCC: 5 | RNVC: 2
5000819371: RNCC: 6 | RNVC: 9

6 Mar 1990

4730-14-557-8929
Hose Coupling

145578929
1511362: RNCC: 3 | RNVC: 2
7520/1: RNCC: 5 | RNVC: 2

28 Jul 2008

4730-14-489-1818
Fluid-Emulsion Spray Nozzle

144891818
71251-4,3MM: RNCC: 3 | RNVC: 2
4400-22-A-F53-4,3MM: RNCC: 5 | RNVC: 2

2 Jul 1997

4730-14-212-1467
Tube Coupling Assembly

142121467
0-3601SB16A: RNCC: 3 | RNVC: 2
0-3601SB16A: RNCC: 5 | RNVC: 9
85-691-3834: RNCC: 6 | RNVC: 9

5 Jul 1980

4730-14-447-2211
Tube To Boss Straight Adapter

144472211
UMSI6 1/4WCO: RNCC: 3 | RNVC: 9

13 May 1991

4730-14-324-7720
Lubrication Fitting

143247720
9213002: RNCC: 3 | RNVC: 2
9-21-30-02: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-578-0970
Flange To Hose Elbow

145780970
0292720470: RNCC: 3 | RNVC: 2

30 Oct 2013

4730-14-350-8702
Piece De Raccordeme

143508702
GSM166-017F12: RNCC: 3 | RNVC: 2
GSM166-17F12: RNCC: 5 | RNVC: 2

12 Jul 1978

4730-14-571-5541
Fluid Passage Bolt

145715541
116205: RNCC: 3 | RNVC: 2
1B06-10X100: RNCC: 5 | RNVC: 2

5 Apr 2012

4730-14-549-3034
Quick Disconnect Coupling Half

145493034
QA 29012 00: RNCC: 3 | RNVC: 2

21 Mar 2006

4730-14-482-7174
Quick Disconnect Coupling Half

144827174
MN6511G-REP18: RNCC: 3 | RNVC: 9

25 Jul 1996

4730-14-368-8374
Tube To Boss Straight Adapter

143688374
8-6X8G1-2: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-420-0585
Tube To Boss Straight Adapter

144200585
O12F: RNCC: 3 | RNVC: 2

18 Nov 1987

4730-14-528-6776
Tube To Hose Straight Adapter

145286776
01051827: RNCC: 3 | RNVC: 2

6 Feb 2002

4730-14-309-9239
Tube To Boss Straight Adapter

143099239
PC42222703: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-345-2400
Bulkhead Hose Connector

143452400
A11A532360102U1: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-538-9665
Return Tube Bend

145389665
NGM0053236003151: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-436-7062
Bulkhead Hose Connector

144367062
DA2C203520611A1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-202-5271
Tube Tee

142025271
R100610: RNCC: 3 | RNVC: 2
R10X6X10: RNCC: 5 | RNVC: 2
R14080: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-231-0873
Tube Tee

142310873
R8X16X8: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-261-3900
Bouchon Special

142613900
79713: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-233-8751
Bague Speciale

142338751
86045: RNCC: 3 | RNVC: 2
9567157640: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-344-5096

4730-14-237-0890

4730-14-262-1396

4730-14-476-0007
Raccord

144760007
A200-65226: RNCC: 3 | RNVC: 2

17 May 1995

4730-14-539-9232
Quick Disconnect Coupling Half

145399232
RBE06.2906/6/JV/OD: RNCC: 3 | RNVC: 2
L01396C: RNCC: 5 | RNVC: 2

20 Feb 2004

4730-14-310-5753
Fluid Passage Bolt

143105753
EFF1-150-102: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-519-4132
Bulkhead Hose Connector

145194132
332A52-0237-15: RNCC: 3 | RNVC: 2

15 Mar 2000

4730-14-501-4675
Tube To Boss Swivel Joint

145014675
NO PRIMARY REF14-501-4675: RNCC: 3 | RNVC: 2
NNP4730844556372: RNCC: 5 | RNVC: 9

29 Oct 1997

4730-14-512-5239
Tube Tee

145125239
NO PRIMARY REF 14-512-5239: RNCC: 3 | RNVC: 2
190134052: RNCC: 5 | RNVC: 9

17 Feb 1999

4730-14-407-4283
Tube To Boss Straight Adapter

144074283
232241: RNCC: 3 | RNVC: 2
UFA30X26-34N: RNCC: 3 | RNVC: 2
13-30-26-34: RNCC: 5 | RNVC: 2

12 Feb 1986

4730-14-310-3326
Pipe Flange

143103326
095700501: RNCC: 3 | RNVC: 2
95-700-501: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-335-7970
Fluid Pressure Line Multiple Connector

143357970
702A30-0427-20: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-279-5608
Tube To Boss Straight Adapter

142795608
9942102A: RNCC: 3 | RNVC: 2
9942102: RNCC: 5 | RNVC: 2
9-94-21-02A: RNCC: 5 | RNVC: 9
TAH1015-4: RNCC: 5 | RNVC: 9
9-94-21-02: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-276-9900
Tube Tee

142769900
T2-8-631X6210: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-499-1456
Fluid Passage Bolt

144991456
NO PRIMARY REF14-499-1456: RNCC: 3 | RNVC: 2
2289: RNCC: 5 | RNVC: 9
VIS16X3-8: RNCC: 5 | RNVC: 9
F300 0T 019 4002: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-421-8722
Tube Coupling

144218722
NO PRIMARY REF14-421-8722: RNCC: 3 | RNVC: 2
10699-1/2: RNCC: 5 | RNVC: 9

9 Feb 1988

4730-14-335-8033
Quick Disconnect Coupling Half

143358033
RBE03-6806: RNCC: 3 | RNVC: 2
25500064: RNCC: 3 | RNVC: 2
25500064: RNCC: 5 | RNVC: 2
RBE3-6806: RNCC: 5 | RNVC: 9
3030/6: RNCC: 5 | RNVC: 9
3030/6: RNCC: 5 | RNVC: 9

24 Jul 1976

4730-14-295-0270

4730-14-227-3009

4730-14-262-1405

4730-14-346-0845
Tube Union

143460845
UFA6X8-13N: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-478-4099
Tube To Boss Straight Adapter

144784099
SMK20-R1/4K-PD: RNCC: 3 | RNVC: 2
SYB-1392: RNCC: 5 | RNVC: 2
SMK20-R1/4K-PD: RNCC: 5 | RNVC: 2

30 Oct 1995

4730-14-311-5834
Tube Tee

143115834
57-12: RNCC: 3 | RNVC: 2
TL12N: RNCC: 3 | RNVC: 2
10L12: RNCC: 3 | RNVC: 2
TL12: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-487-0634
Hydraulic System Accessories Manifold

144870634
A03037-10-7000P005: RNCC: 3 | RNVC: 2

2 Apr 1997

4730-14-380-4557

4730-14-041-2502
Pipe Flange

140412502
N410-138: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-263-6359
Tube To Boss Straight Adapter

142636359
7062BC1RCET1-10A52-3: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-308-4705
Tube Fitting Brazing Ferrule

143084705
GSM163-011REP10-2-14F8: RNCC: 3 | RNVC: 2
GSM163-11AREP10-2-14: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-331-8024
Fluid Pressure Line Multiple Connector

143318024
613-989-437-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-314-5671
Jeu Demi-Manchons

143145671
L40.315.06: RNCC: 3 | RNVC: 2
L40-315-06: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-507-9004
Tube To Boss Straight Adapter

145079004
4A16L/16X150CO: RNCC: 3 | RNVC: 2
104L05304: RNCC: 5 | RNVC: 2
5005030067: RNCC: 5 | RNVC: 2

26 Aug 1998

4730-14-389-7980
Bulkhead Hose Connector

143897980
7062HA1F1-25-129E7062BA1T1UA9: RNCC: 2 | RNVC: 2

20 Dec 1983

4730-14-549-4666
Tube To Boss Swivel Joint

145494666
BM611-16K: RNCC: 3 | RNVC: 2
9560144500: RNCC: 5 | RNVC: 2

6 Apr 2006

4730-14-375-9120
Tube To Boss Straight Adapter

143759120
1203: RNCC: 3 | RNVC: 2
714-090: RNCC: 5 | RNVC: 2

30 Mar 1982

4730-14-032-2738
Sediment Strainer Element

140322738
01000676E00100: RNCC: 3 | RNVC: 2
01000676E00100: RNCC: 3 | RNVC: 9
10-100-67-100MICR0NS: RNCC: 5 | RNVC: 9

17 May 1982

4730-14-506-0366
Flange To Tube Elbow

145060366
RA1M523102191U1: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-525-7511
Fluid Passage Bolt

145257511
04204465: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-343-7791
Tube To Boss Straight Adapter

143437791
341465: RNCC: 3 | RNVC: 2
341465: RNCC: 5 | RNVC: 2
341465: RNCC: 5 | RNVC: 9

13 Jul 1977

4730-14-504-9382
Tube Tee

145049382
1823381004: RNCC: 3 | RNVC: 2

11 Mar 1998

4730-14-498-9651
Tube To Boss Straight Adapter

144989651
5000293291: RNCC: 3 | RNVC: 2
F00067146: RNCC: 3 | RNVC: 2
F00067146: RNCC: 5 | RNVC: 9
F300 0T 014 1376: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-479-6928
Tube Tee

144796928
625242: RNCC: 3 | RNVC: 2

31 Jan 1996

4730-14-371-0515
Tube Tee

143710515
4730AJ4.1DN30EQUIPE: RNCC: 2 | RNVC: 2
8404300066: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-395-3706
Tube To Gas Fitting Straight Adapter

143953706
N0189F7A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-303-0200
Tube To Boss Straight Adapter

143030200
A90217: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-382-8811
Tube To Boss Straight Adapter

143828811
PE60841H12: RNCC: 3 | RNVC: 2

19 Apr 2000

4730-14-500-4613
Exhaust-Intake Pneumatic Muffler

145004613
C63405000000: RNCC: 3 | RNVC: 2
F300 0T 024 4782: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-266-2629
Tube To Boss Straight Adapter

142662629
29435: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-539-7786
Quick Disconnect Coupling Half

145397786
81481: RNCC: 3 | RNVC: 2

5 Feb 2004

4730-14-374-7770
Bulkhead Hose Connector

143747770
0000363070: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-274-1898
Tube Coupling

142741898
MF6: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-512-8003
Tube Coupling

145128003
167932: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-510-7752
Water Distribution Nozzle

145107752
P108046E: RNCC: 3 | RNVC: 2

12 Nov 1998

4730-14-325-6563
Tube Tee

143256563
R8X6X6S: RNCC: 3 | RNVC: 2
RA8X6X6S: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-353-1206
Tube Coupling

143531206
RC55-90: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-242-7945
Tube Tee

142427945
NG410-25PL11: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-336-3904
Fluid Pressure Line Multiple Connector

143363904
341A75-2007-02: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-410-9875
Tube Tee

144109875
4730GD0368: RNCC: 2 | RNVC: 2
BN324-554F5-368: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-293-3620
Fluid Passage Bolt

142933620
S11-022: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-553-6209
Fluid Flow Restrictor

145536209
199S6-05: RNCC: 3 | RNVC: 2

24 Apr 2007

4730-14-282-0953
Tube To Boss Straight Adapter

142820953
Q1-53-10-15X21: RNCC: 3 | RNVC: 2
UFK10X15-21N: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-525-6429
Tube To Boss Straight Adapter

145256429
20 242 010 3900: RNCC: 3 | RNVC: 2
242-010-3900: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-476-3014
Sediment Strainer Element

144763014
01000695A02040: RNCC: 3 | RNVC: 2
01000695A02040: RNCC: 3 | RNVC: 9
10-40-69-2MM: RNCC: 5 | RNVC: 9
E10-40-955-REP3: RNCC: 5 | RNVC: 9

2 Jun 1995

4730-14-388-3387
Quick Disconnect Coupling Half

143883387
2650-20-03: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-326-7766
Restriction

143267766
NO PRIMARY REF14-326-7766: RNCC: 3 | RNVC: 2
3C32507-2: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-404-5251

4730-14-316-2208
Sediment Strainer Element

143162208
485-102-148-0: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-446-4715
Flange To Tube Elbow

144464715
0294400100: RNCC: 3 | RNVC: 2
302-264-201-0: RNCC: 5 | RNVC: 2

20 Mar 1991

4730-14-367-7728
Fluid Pressure Line Multiple Connector

143677728
303-141-601-0: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-426-7455
Tube Tee

144267455
4730HEING033,7X4,5-13,5X2: RNCC: 2 | RNVC: 2

20 Sep 1988

4730-14-277-6560
Pipe Flange

142776560
6784-1CD10-6: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-257-9291

4730-14-323-3192
Vis Sur Capacite

143233192
R35366SM: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-247-3602

4730-14-330-6518

4730-14-573-0516
Tube Reducer

145730516
REDUC00072: RNCC: 3 | RNVC: 2

7 Sep 2012

4730-14-369-2737

4730-14-399-8802
Rapid Action Coupled Pipe Cap

143998802
RBE03-8550IC9: RNCC: 3 | RNVC: 2
RBE3-8550IC9: RNCC: 5 | RNVC: 2

11 Apr 1985

4730-14-561-8643
Hose Clamp

145618643
GBS 285/30-W2: RNCC: 3 | RNVC: 2

14 Sep 2009

4730-14-327-5107

4730-14-223-3388

4730-14-290-9460

4730-14-311-3248
Tube Fitting Brazing Ferrule

143113248
7201-02: RNCC: 3 | RNVC: 2
0611-51: RNCC: 5 | RNVC: 2
4-012956: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-265-1192
Tube To Boss Straight Adapter

142651192
702A30-0607-20: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-415-3061
Pipe Flange

144153061
B52-14A1-02DN150: RNCC: 3 | RNVC: 2
52717150: RNCC: 5 | RNVC: 2

29 Apr 1987

4730-14-270-4102
Tube To Boss Straight Adapter

142704102
13-10 1-4BGS: RNCC: 3 | RNVC: 2
4-585500-8: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-544-3988
Quick Disconnect Coupling Half

145443988
RBE06-1151/IA/JE: RNCC: 3 | RNVC: 2
BO20152: RNCC: 5 | RNVC: 2

26 Jan 2005

4730-14-346-7060
Plaque De Reduction

143467060
6784-1DH50-20A: RNCC: 2 | RNVC: 2
MEC11232: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-371-8765
Bride Raccordement

143718765
GSM162-006F23: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-349-6765
Tube Fitting Clinch Sleeve

143496765
91241300: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-269-1859

4730-14-398-6968
Pipe Expansion Joint

143986968
NO PRIMARY REF14-398-6968: RNCC: 3 | RNVC: 2
M18581-2: RNCC: 5 | RNVC: 9

31 Jan 1985

4730-14-345-1075
Sediment Strainer Element

143451075
300-656-002-0: RNCC: 3 | RNVC: 2
001066020A: RNCC: 5 | RNVC: 2
300-656-002P: RNCC: 5 | RNVC: 2

5 Oct 1977

4730-14-204-8527

4730-14-484-0388
Quick Disconnect Coupling Half

144840388
HA05331-35: RNCC: 3 | RNVC: 2
HA0533135: RNCC: 5 | RNVC: 2

17 Oct 1996

4730-14-344-7499
Tube To Boss Straight Adapter

143447499
EA1M782-18-04: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-385-7285
Tube Coupling

143857285
436953: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-262-1557
Pipe Flange

142621557
7062DJ1F1M108-7XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-356-1972
Fluid Pressure Line Multiple Connector

143561972
5171563600: RNCC: 3 | RNVC: 2
715636: RNCC: 5 | RNVC: 2
89302154: RNCC: 5 | RNVC: 2

25 Apr 1979

4730-14-379-9313
Tube To Boss Straight Adapter

143799313
7763: RNCC: 3 | RNVC: 9

20 Oct 1982

4730-14-328-2599
Tube Tee

143282599
ZA29D0AE: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-372-2938
Fluid Pressure Line Multiple Connector

143722938
9630051004: RNCC: 3 | RNVC: 2
15778200: RNCC: 5 | RNVC: 9
1577820008: RNCC: 5 | RNVC: 9

1 Sep 1981

4730-14-227-0166
Bouchon Arbre A Cam

142270166
0000117740: RNCC: 3 | RNVC: 2
117740: RNCC: 5 | RNVC: 9
0000117740: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-335-3083
Raccord Hydrau Bloc

143353083
189061: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-575-7832
Flange To Tube Elbow

145757832
M2811351200000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-237-5587
Fourrure Epaulee Sp

142375587
P32FC10X12: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-280-5056
Pastille Raccord

142805056
A76060: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-570-7009
Pipe Flange

145707009
5010080: RNCC: 3 | RNVC: 2

18 Jan 2012

4730-14-335-5473
Tube To Boss Straight Adapter

143355473
610-304-005-0: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-417-7725
Tube To Boss Straight Adapter

144177725
Q15GE38S1-1/4BSPKNU: RNCC: 3 | RNVC: 2
8405384266NU: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-240-5835
Tube To Boss Straight Adapter

142405835
52-6-5-10CYL: RNCC: 3 | RNVC: 2
UML6X5-10N: RNCC: 3 | RNVC: 2
4L6-5-10CYL: RNCC: 3 | RNVC: 2
ML6-10: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-309-7655
Tube To Boss Straight Adapter

143097655
R120812100Z8: RNCC: 3 | RNVC: 2
R12-8-12X100Z8: RNCC: 5 | RNVC: 2
R1208-12X100Z8: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-288-2621
Allonge Graisseur

142882621
9207727: RNCC: 3 | RNVC: 2
9-20-77-27: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-361-4572
Lubrication Fitting

143614572
890: RNCC: 3 | RNVC: 2
85-689-1986: RNCC: 6 | RNVC: 9

24 Jan 1980

4730-14-423-9264
Quick Disconnect Plug

144239264
48500: RNCC: 3 | RNVC: 2
MRA04-8500: RNCC: 3 | RNVC: 2
MR4-8500: RNCC: 5 | RNVC: 2

5 May 1988

4730-14-463-4056
Threaded Tube Fitting Plug

144634056
A1014 12: RNCC: 3 | RNVC: 2
2182-12: RNCC: 5 | RNVC: 9
91741696: RNCC: 5 | RNVC: 9

9 Jun 1993

4730-14-490-5569
Special-Shaped Hose Clamp

144905569
J05508-04-0100P055: RNCC: 3 | RNVC: 2

2 Oct 1997

4730-14-306-8568
Tube Fitting Brazing Ferrule

143068568
RUAN7519-30-25: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-369-6668
Solder Type Tube Fitting Plug

143696668
GSM164-043F13-2: RNCC: 3 | RNVC: 2
MEC10785: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-256-6309
Sediment Strainer Element

142566309
4862-32: RNCC: 3 | RNVC: 2
4862-32PCE8-9: RNCC: 5 | RNVC: 2
4862-32PCE8-9: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-391-6803
Quick Disconnect Coupling Half

143916803
RBE06-6806IA7-5: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-571-7528
Tube Coupling Nut

145717528
ABS0107-300: RNCC: 1 | RNVC: 2
3-3616-300: RNCC: 3 | RNVC: 2
3-3616-300: RNCC: 3 | RNVC: 2
3-3616-480: RNCC: 3 | RNVC: 2
G603-48D: RNCC: 5 | RNVC: 2

2 May 2012

4730-14-307-7238
Clapet Mobile

143077238
4K05-081: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-268-1228
Plaque De Reduction

142681228
6784-1DH38-14: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-501-2384
Tube To Boss Straight Adapter

145012384
471-350: RNCC: 3 | RNVC: 2
471.350: RNCC: 3 | RNVC: 2
F300 0T 025 2789: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-420-1154
Tube-Hose Fitting Compression Sleeve

144201154
10016-036: RNCC: 3 | RNVC: 2
89236359: RNCC: 5 | RNVC: 2

18 Nov 1987

4730-14-287-4938
Self-Sealing Coupling Half

142874938
432F0052-15066023: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-410-7738
Quick Disconnect Coupling Half

144107738
RBE11-1103/IA/3: RNCC: 3 | RNVC: 2
RBE11-1103IA3: RNCC: 5 | RNVC: 2

9 Jul 1986

4730-14-345-4790
Pipeline Flexible Spacer

143454790
IT131NTH150U1198F4: RNCC: 2 | RNVC: 2
40-18DN150U1198F4: RNCC: 3 | RNVC: 2
I131NTH150U1198F4: RNCC: 5 | RNVC: 2
40-18DN150U1198F4: RNCC: 5 | RNVC: 9

5 Oct 1977

4730-14-283-5516
Flexible Tube Coupling Assembly

142835516
L32-03: RNCC: 3 | RNVC: 2
DHS613-211-30: RNCC: 5 | RNVC: 2
L32-0-3: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-416-5833
Quick Disconnect Coupling Half

144165833
E30-40-3247-001F2/4: RNCC: 3 | RNVC: 2

18 Jun 1987

4730-14-365-8188
Self-Sealing Coupling Half

143658188
672C16-1: RNCC: 3 | RNVC: 2
672C16-11: RNCC: 3 | RNVC: 2
303-971-001-0: RNCC: 5 | RNVC: 2
303-971-003-0: RNCC: 5 | RNVC: 2

8 Oct 1980

4730-14-515-3851
Tube To Boss Straight Adapter

145153851
6200075: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-330-8009

4730-14-304-0351
Diaphragme Special

143040351
AS34TE2AREP2: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-344-1026

4730-14-296-9634
Echangeur Eau-Huile

142969634
0000140875: RNCC: 3 | RNVC: 2
0000140875: RNCC: 5 | RNVC: 9
140875: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-226-9947
Raccord Special

142269947
0000300180: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-351-8446
Tube To Boss Straight Adapter

143518446
UFL18 1-2BSP: RNCC: 3 | RNVC: 2

16 Oct 1978

4730-14-491-1921
Union

144911921
GE8S: RNCC: 3 | RNVC: 2
F300 0T 001 8225: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-518-5092
Return Tube Bend

145185092
HCOXX000062: RNCC: 3 | RNVC: 9

9 Feb 2000

4730-14-496-5103
Tube To Boss Straight Adapter

144965103
550064: RNCC: 3 | RNVC: 2
F300 0T 021 6152: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-398-9761
Tube To Boss Straight Adapter

143989761
1121671000: RNCC: 3 | RNVC: 2
DAH1121671000: RNCC: 5 | RNVC: 9

6 Mar 1985

4730-14-374-1373
Tube Tee

143741373
P166B060608S: RNCC: 3 | RNVC: 2
723B060608S: RNCC: 3 | RNVC: 2
723.B.06.06.08S: RNCC: 3 | RNVC: 2
74723B060608S: RNCC: 5 | RNVC: 2
723B06-06-08S: RNCC: 5 | RNVC: 2
DHS613-643-02: RNCC: 5 | RNVC: 2
723 B 06 06 08S: RNCC: 5 | RNVC: 2
723B06 06 08S: RNCC: 5 | RNVC: 2
723B06-06-08S: RNCC: 5 | RNVC: 2
723B060608S: RNCC: 5 | RNVC: 2

8 Dec 1981

4730-14-224-3899
Tube Fitting Brazing Ferrule

142243899
GSM163-002DETNH: RNCC: 3 | RNVC: 2
GSM163-02DETNH: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-380-4864
Fluid Pressure Line Multiple Connector

143804864
7910009976: RNCC: 3 | RNVC: 2
4820-09: RNCC: 5 | RNVC: 2

29 Nov 1982

4730-14-460-8434
Quick Disconnect Coupling Half

144608434
RBE06-2706/OS: RNCC: 3 | RNVC: 2
RBE06-2706-0S: RNCC: 5 | RNVC: 2
RBE6-2706-0S: RNCC: 5 | RNVC: 2

10 Feb 1993

4730-14-256-5491
Tube To Boss Straight Adapter

142565491
12-38-42X200: RNCC: 3 | RNVC: 2
UMA38X42-200N: RNCC: 3 | RNVC: 2
4A38-42X200: RNCC: 3 | RNVC: 2
M38-42X2: RNCC: 3 | RNVC: 2
121018: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-290-3587
Quick Disconnect Coupling Half

142903587
1032117: RNCC: 3 | RNVC: 2
11290: RNCC: 3 | RNVC: 2
10-321-17: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-255-4239
Raccord Special

142554239
321A29-0274-20: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-328-4679
Tube To Boss Straight Adapter

143284679
GSM514-001F21: RNCC: 3 | RNVC: 2
A0210-004F21: RNCC: 5 | RNVC: 2
GSM514-01F21: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-451-6026
Quick Disconnect Coupling Half

144516026
RIA06-1101/SP-N00129291: RNCC: 3 | RNVC: 2
RIA6-1101/SP-N00129291: RNCC: 5 | RNVC: 2

25 Nov 1991

4730-14-332-0359
Diaphragme

143320359
6784-1CI6-160: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-219-7422

4730-14-367-0459

4730-14-319-1668

4730-14-233-3877
Bouchon Filete Spec

142333877
9211447000: RNCC: 3 | RNVC: 2
9-211447-000: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-457-7072
Pipe Fitting Flared Collar

144577072
89056-410: RNCC: 3 | RNVC: 2
RAR1555: RNCC: 5 | RNVC: 2
89056410: RNCC: 5 | RNVC: 2

16 Sep 1992

4730-14-449-2168
Quick Disconnect Coupling Assembly

144492168
017054-00: RNCC: 3 | RNVC: 2
2280-05: RNCC: 5 | RNVC: 2
228005: RNCC: 5 | RNVC: 2

7 Aug 1991

4730-14-292-5447

4730-14-383-6608
Pipe Flange

143836608
366A55-1034-21: RNCC: 3 | RNVC: 2

11 Apr 1983

4730-14-231-5752
Anchor And Reinforcement Pipe Clamp

142315752
NO PRIMARY REF14-231-5752: RNCC: 3 | RNVC: 2
840T15X21: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-357-0757
Quick Disconnect Coupling Half

143570757
RBE6-2101HPJV: RNCC: 3 | RNVC: 2

7 Jun 1979

4730-14-314-2174
Pipe Flange

143142174
RUAN7520-30-25: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-321-6343
Tube To Boss Straight Adapter

143216343
702A30-0716-20: RNCC: 3 | RNVC: 2

7 Mar 1996

4730-14-490-1934
Fluid Flow Restrictor

144901934
307-162-103-0: RNCC: 3 | RNVC: 2

17 Sep 1997

4730-14-562-6035
Pipeline Flexible Spacer

145626035
R1/50/KR 320-WG/P: RNCC: 3 | RNVC: 2

6 Nov 2009

4730-14-260-9193
Pipe Flange

142609193
7062CE1F2-30AF42-2: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-393-3098
Tube Tee

143933098
4730GD0108: RNCC: 2 | RNVC: 2
BN324-554F4-108: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-221-8895
Vis Sur Capacite Sp

142218895
773-411-055AF13: RNCC: 3 | RNVC: 2
773-411-055AF13: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-485-6371
Tube Coupling

144856371
ABF1E7-8X13S2-8X10: RNCC: 3 | RNVC: 9
ABF1E7-8X13S2-8X10: RNCC: 5 | RNVC: 9
RD18GEN: RNCC: 5 | RNVC: 9

6 Feb 1997

4730-14-410-9828
Tube Tee

144109828
TMA20-27X20N: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-492-4683
Tube To Boss Straight Adapter

144924683
NO PRIMARY REF14-492-4683: RNCC: 3 | RNVC: 2
5000667448: RNCC: 5 | RNVC: 9
F300 0T 007 7111: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-309-7577
Tube To Boss Straight Adapter

143097577
2063-19: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-461-2846
Tube To Gas Fitting Straight Adapter

144612846
36-0530-04: RNCC: 3 | RNVC: 2
91626364: RNCC: 5 | RNVC: 2
M65-06-18: RNCC: 5 | RNVC: 2

3 Mar 1993

4730-14-491-4883
Hose To Boss Straight Adapter

144914883
NO PRIMARY REF14-491-4883: RNCC: 3 | RNVC: 2
0024222251: RNCC: 5 | RNVC: 9
F300 0T 003 1351: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-241-5968

4730-14-420-6361
Hose To Boss Straight Adapter

144206361
006505035P: RNCC: 3 | RNVC: 2

16 Dec 1987

4730-14-504-0605
Tube Coupling

145040605
NNP4730878750152: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-565-1556
Quick Disconnect Coupling Half

145651556
82449145001: RNCC: 3 | RNVC: 2

19 Jul 2010

4730-14-397-9511
Tube To Boss Straight Adapter

143979511
0703100: RNCC: 3 | RNVC: 2
FOE0703100: RNCC: 5 | RNVC: 9

31 Jan 1985

4730-14-504-7016
Anchor And Reinforcement Pipe Clamp

145047016
488626X: RNCC: 3 | RNVC: 2
5001833847: RNCC: 3 | RNVC: 2

27 Feb 1998

4730-14-490-0893
Drainage Pipe Coupling

144900893
29609750: RNCC: 3 | RNVC: 2

10 Sep 1997

4730-14-244-4938
Tube To Boss Straight Adapter

142444938
364654: RNCC: 3 | RNVC: 2
364654: RNCC: 6 | RNVC: 9

1 Jan 1968

4730-14-437-1821
Protective Lubrication Fitting Cap

144371821
ACE32-2NC473A: RNCC: 3 | RNVC: 2

22 Jan 1990

4730-14-368-8372
Quick Disconnect Coupling Half

143688372
RBE08-2708: RNCC: 3 | RNVC: 2
RBE8-2708: RNCC: 5 | RNVC: 2

10 Mar 1981

4730-14-416-3304
Pipe Flange

144163304
E29203-01A-PN10DN350Z2CND17-12: RNCC: 2 | RNVC: 2

3 Jun 1987

Load More Results