What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 169 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 169 of 185

4730-14-482-5132
Flange To Boss Straight Adapter

144825132
PM1A521119001: RNCC: 3 | RNVC: 2
PM1A521119001: RNCC: 5 | RNVC: 2

11 Jul 1996

4730-14-430-4533
Hose To Gas Fitting Straight Adapter

144304533
01201013: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-379-8547
Fluid Pressure Line Multiple Connector

143798547
51160010: RNCC: 3 | RNVC: 2
51160010: RNCC: 5 | RNVC: 9

20 Oct 1982

4730-14-246-8911
Tube Fitting Brazing Ferrule

142468911
400110: RNCC: 3 | RNVC: 2
400110: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-379-8405
Bulkhead Hose Connector

143798405
0294450660: RNCC: 3 | RNVC: 2
302-401-401P: RNCC: 5 | RNVC: 2

20 Oct 1982

4730-14-533-3175
Hose Coupling Assembly

145333175
10638418: RNCC: 3 | RNVC: 2

29 Jan 2003

4730-14-349-3338
Tube Tee

143493338
31080810: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-230-5951
Tube Tee

142305951
300720: RNCC: 3 | RNVC: 2
300720: RNCC: 5 | RNVC: 9
300720S: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-285-3571
Tube Fitting Clinch Sleeve

142853571
91242000: RNCC: 3 | RNVC: 2
5000497739: RNCC: 5 | RNVC: 2
5000497739: RNCC: 5 | RNVC: 9
BAH20: RNCC: 5 | RNVC: 9
5000497739: RNCC: 6 | RNVC: 9

1 Jan 1972

4730-14-403-3548
Hose To Boss Straight Adapter

144033548
222139: RNCC: 3 | RNVC: 2

21 Aug 1985

4730-14-511-0950
Tube Tee

145110950
E29591JB40AE: RNCC: 2 | RNVC: 2

2 Dec 1998

4730-14-507-6240
Lubrication Fitting

145076240
5004-013: RNCC: 3 | RNVC: 2

30 Jul 1998

4730-14-447-4824
Tube Coupling

144474824
RD1571-00: RNCC: 3 | RNVC: 2

24 May 1991

4730-14-552-3935
Tube Tee

145523935
EVL15-PL-0MD: RNCC: 3 | RNVC: 2
EVL15-PL-0MD: RNCC: 3 | RNVC: 9

18 Dec 2006

4730-14-383-3792
Quick Disconnect Coupling Half

143833792
NO PRIMARY REF14-383-3792: RNCC: 3 | RNVC: 2
69312112: RNCC: 5 | RNVC: 9

11 Apr 1983

4730-14-362-8268
Tube To Boss Straight Adapter

143628268
J00679-16-0000P006: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-530-6169
Quick-Disconnect Nipple

145306169
P205134-118: RNCC: 3 | RNVC: 9
131498: RNCC: 5 | RNVC: 2

26 Jun 2002

4730-14-292-2105
Raccord Equipe

142922105
608-12-90ARS: RNCC: 3 | RNVC: 2
608-1290ARS: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-498-5652
Tube To Boss Straight Adapter

144985652
PAA58-52-001: RNCC: 3 | RNVC: 2
PAA5852001: RNCC: 3 | RNVC: 2
F300 0T 005 7254: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-495-6106
Tube Union

144956106
B48375-68: RNCC: 3 | RNVC: 2
F300 0T 019 5378: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-566-2810
Hydraulic System Accessories Manifold

145662810
62523375AA: RNCC: 3 | RNVC: 2
KV1118-035: RNCC: 3 | RNVC: 2
PVAPVE21N20: RNCC: 5 | RNVC: 1

3 Nov 2010

4730-14-552-4544
Quick Disconnect Coupling Half

145524544
S717A20T1012: RNCC: 1 | RNVC: 2
6936-2004: RNCC: 3 | RNVC: 2

4 Jan 2007

4730-14-458-0558
Hydraulic System Accessories Manifold

144580558
SSNGA8S105-A: RNCC: 3 | RNVC: 2
312332A: RNCC: 3 | RNVC: 2

2 Oct 1992

4730-14-418-6392
Tube To Boss Straight Adapter

144186392
F4BRAB10-1/4: RNCC: 3 | RNVC: 2
F4BRAB10-1/4: RNCC: 3 | RNVC: 9

8 Sep 1987

4730-14-443-6729
Pipeline Flexible Spacer

144436729
2-544779-6: RNCC: 3 | RNVC: 2
2-544779-6: RNCC: 5 | RNVC: 9

4 Dec 1990

4730-14-205-0425

4730-14-273-5332

4730-14-327-2050
Quick Disconnect Coupling Half

143272050
RBF03210: RNCC: 3 | RNVC: 2
MR46904: RNCC: 3 | RNVC: 2
MRA04-6904: RNCC: 3 | RNVC: 2
46904: RNCC: 5 | RNVC: 2
MR4-6904: RNCC: 5 | RNVC: 2
MRA4-6904: RNCC: 5 | RNVC: 2
8201505: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-041-2504
Bulkhead Hose Connector

140412504
N410-14: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-552-8566
Tube Fitting Locknut

145528566
HERFERU3: RNCC: 3 | RNVC: 2

8 Feb 2007

4730-14-331-7354
Tube Fitting Flared Sleeve

143317354
17525: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-516-7454
Quick Disconnect Coupling Assembly

145167454
5101010: RNCC: 3 | RNVC: 2
Y00005952: RNCC: 3 | RNVC: 2
Y00005952: RNCC: 5 | RNVC: 9

13 Oct 1999

4730-14-447-1477
Hose To Grooved Clamp Coupling Straight Adapter

144471477
MVN366-19-00: RNCC: 3 | RNVC: 2
MVN366-09-M1-00: RNCC: 5 | RNVC: 2
MVN366-17-00: RNCC: 5 | RNVC: 2

3 May 1991

4730-14-478-2945
Fluid Passage Bolt

144782945
DIN7643-A20/D8286: RNCC: 3 | RNVC: 2
DIN6743-A20: RNCC: 5 | RNVC: 2

20 Oct 1995

4730-14-032-1542
Pipe Flange

140321542
CMT30E9030AF3DE168-3REP3: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-461-0682
Pipe Flange

144610682
3500103BRIDE1"1/4GAZ: RNCC: 3 | RNVC: 2

22 Feb 1993

4730-14-396-3489
Bulkhead Hose Connector

143963489
RBE06-2101-9VDDKN: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-484-3561
Quick Disconnect Coupling Half

144843561
RBE08-1810/IC/41B8/OS: RNCC: 3 | RNVC: 2
91737309: RNCC: 5 | RNVC: 2
91737309: RNCC: 5 | RNVC: 2

14 Nov 1996

4730-14-294-2696

4730-14-465-1322
Obture Embout

144651322
9970-143-519: RNCC: 3 | RNVC: 2

15 Sep 1993

4730-14-241-2060
Raccord Gauche Comp

142412060
JGA08-09: RNCC: 3 | RNVC: 2
13580-70: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-478-6701
Raccord

144786701
106-35-30: RNCC: 3 | RNVC: 2

13 Nov 1995

4730-14-276-7073
Tube To Boss Straight Adapter

142767073
3C50-25: RNCC: 3 | RNVC: 2
RL25: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-201-9332
Raccord Coude Orien

142019332
577-506-028-0: RNCC: 3 | RNVC: 2
577-506-028-0: RNCC: 8 | RNVC: 2

1 Jan 1962

4730-14-397-7015
Embout Epaule A Sou

143977015
GSM164-023F47: RNCC: 3 | RNVC: 2
MAT164-0355F47: RNCC: 3 | RNVC: 2
4730ACF4PN250DE48,26: RNCC: 3 | RNVC: 9

14 Dec 1984

4730-14-379-9460
Embout Cassant

143799460
MAT900-01-00: RNCC: 3 | RNVC: 2

20 Oct 1982

4730-14-223-5738
Fluid Passage Bolt

142235738
NO PRIMARY REF14-223-5738: RNCC: 3 | RNVC: 2
0944700301: RNCC: 5 | RNVC: 2
944700301: RNCC: 5 | RNVC: 9
5528-1: RNCC: 5 | RNVC: 9
0944700301: RNCC: 5 | RNVC: 9
30901349: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-404-3919
Hose To Boss Straight Adapter

144043919
9943584: RNCC: 3 | RNVC: 2
32571: RNCC: 5 | RNVC: 9
A-18013-01: RNCC: 5 | RNVC: 9

30 Oct 1985

4730-14-410-7318
Quick Disconnect Coupling Half

144107318
VG2-8-2M: RNCC: 3 | RNVC: 2
752121: RNCC: 5 | RNVC: 2

9 Jul 1986

4730-14-408-1795
Droit Raccord

144081795
A2H25899-7: RNCC: 3 | RNVC: 2
A2H25899-7-79511: RNCC: 5 | RNVC: 2

19 Mar 1986

4730-14-439-6753
Tube Tee

144396753
16379599: RNCC: 3 | RNVC: 2
16379599: RNCC: 5 | RNVC: 9

16 May 1990

4730-14-523-3407
Bulkhead Hose Connector

145233407
1903-911: RNCC: 3 | RNVC: 2

10 Jan 2001

4730-14-332-7975
Pipeline Flexible Spacer

143327975
ERV80TWJAUNE: RNCC: 3 | RNVC: 2
0025586A: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-226-1648
Fluid Pressure Line Multiple Connector

142261648
41360: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-396-3994
Tube Coupling

143963994
AURA14X6NU: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-443-4931
Lubrication Fitting

144434931
107.45.01: RNCC: 3 | RNVC: 2

27 Nov 1990

4730-14-220-6295
Fluid Passage Bolt

142206295
262995: RNCC: 3 | RNVC: 2
262995: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-549-4381
Tube Coupling Nut Assembly

145494381
0235297530: RNCC: 3 | RNVC: 2

4 Apr 2006

4730-14-384-4938
Fluid Passage Bolt

143844938
0000364220: RNCC: 3 | RNVC: 2

4 May 1983

4730-14-365-2838

4730-14-504-0906
Tube Coupling

145040906
39254034: RNCC: 3 | RNVC: 2
39254034: RNCC: 3 | RNVC: 9

5 Feb 1998

4730-14-461-0308
Quick Disconnect Coupling Half

144610308
KL213MS12X100N: RNCC: 3 | RNVC: 2

17 Feb 1993

4730-14-365-2831

4730-14-303-0860

4730-14-572-6207
Tube Union

145726207
GE15LM16X1,5CF: RNCC: 3 | RNVC: 2
436805: RNCC: 5 | RNVC: 2

17 Jul 2012

4730-14-470-2814
Sediment Strainer Element

144702814
BSNGCFF008F13B: RNCC: 3 | RNVC: 2

14 Jun 1994

4730-14-523-2392
Flange To Tube Straight Adapter

145232392
RA1M522404290: RNCC: 3 | RNVC: 2

10 Jan 2001

4730-14-505-3954
Fluid Pressure Line Multiple Connector

145053954
12014006: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-554-2148
Tube To Boss Straight Adapter

145542148
357 212: RNCC: 3 | RNVC: 2
357 212: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-14-468-1444
Tube To Boss Straight Adapter

144681444
39903: RNCC: 3 | RNVC: 2
39903: RNCC: 5 | RNVC: 2
91745735: RNCC: 5 | RNVC: 2

9 Feb 1994

4730-14-405-8367
Pipe Flange

144058367
D24058: RNCC: 3 | RNVC: 2

4 Dec 1985

4730-14-525-2230
Tube To Boss Straight Adapter

145252230
06470P076007: RNCC: 3 | RNVC: 2
50302700: RNCC: 3 | RNVC: 2

23 May 2001

4730-14-347-5718
Tube Coupling

143475718
51: RNCC: 3 | RNVC: 2

1 Mar 1978

4730-14-535-1394
Tube Tee

145351394
1041124188: RNCC: 3 | RNVC: 2
5005030929: RNCC: 5 | RNVC: 2

14 May 2003

4730-14-543-7324
Lubrication Fitting

145437324
462510050: RNCC: 3 | RNVC: 2

7 Dec 2004

4730-14-367-5038
Tube To Boss Straight Adapter

143675038
EDE53260-01-11: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-434-4816
Fluid Passage Bolt

144344816
R4A751-20-02: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-397-0255
Quick Disconnect Plug

143970255
RBE11-8500/IC: RNCC: 3 | RNVC: 2
RBE11-8500IC: RNCC: 5 | RNVC: 2
RB11-8500/IC: RNCC: 5 | RNVC: 2

1 Dec 1984

4730-14-464-3336
Tube To Boss Straight Adapter

144643336
4A16-18X150: RNCC: 3 | RNVC: 2
204104306: RNCC: 5 | RNVC: 2
5005030757: RNCC: 5 | RNVC: 2
519 90 30 574 11: RNCC: 5 | RNVC: 2

28 Jul 1993

4730-14-256-9326
Pipe Flange

142569326
RUHB2-40: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-560-0803
Hose To Boss Straight Adapter

145600803
0674123-01: RNCC: 3 | RNVC: 2

20 Mar 2009

4730-14-376-5114
Tube To Boss Straight Adapter

143765114
NO PRIMARY REF14-376-5114: RNCC: 3 | RNVC: 2
404113576: RNCC: 5 | RNVC: 2
404113576: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-374-1149
Tube Tee

143741149
S6BXS12: RNCC: 3 | RNVC: 2
4730-AA-1087448: RNCC: 6 | RNVC: 9

8 Dec 1981

4730-14-485-6374
Tube Coupling

144856374
ABF1PE7-6X10S2-6X8: RNCC: 3 | RNVC: 9
RD16GEN: RNCC: 5 | RNVC: 9
ABF1PE7-6X10S2-6X8: RNCC: 5 | RNVC: 9

6 Feb 1997

4730-14-310-2809
Sediment Strainer Element

143102809
554-412-302: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-495-6103
Union

144956103
A48375-67: RNCC: 3 | RNVC: 2
F300 0T 019 5375: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-325-6823
Equ A Bride Raccord

143256823
0000367380: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-492-6776
Graisseur

144926776
21532-1: RNCC: 3 | RNVC: 2
F300 0T 008 5038: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-268-8885
Tube Elbow

142688885
631X5108: RNCC: 3 | RNVC: 2
E1-6B631X5108: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-267-5299
Raccord Special

142675299
6898-0070: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-390-0065
Tube Tee

143900065
DHS613-646-02: RNCC: 3 | RNVC: 2
798B06-06-08TJC: RNCC: 5 | RNVC: 2

26 Jan 1984

4730-14-380-9708
Fond Inferieur

143809708
GSM525-002F5: RNCC: 3 | RNVC: 2

14 Dec 1982

4730-14-226-8782
Tube Tee

142268782
GSM1297FE3-40TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-237-4879
Bouchon Special

142374879
A59-29-1288: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-463-3926
Tube Tee

144633926
123612105: RNCC: 3 | RNVC: 9

9 Jun 1993

4730-14-336-5003
Tube Tee

143365003
1TR20X20X12NU: RNCC: 3 | RNVC: 2
91758475: RNCC: 5 | RNVC: 2

14 Aug 1976

4730-14-228-9943
Tube To Boss Straight Adapter

142289943
19185: RNCC: 3 | RNVC: 2
701425: RNCC: 5 | RNVC: 9
062057741: RNCC: 5 | RNVC: 9
57741: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-275-0281
Tube To Boss Straight Adapter

142750281
U1114F17-14: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-331-6669

4730-14-388-7754
Tube To Boss Straight Adapter

143887754
S4710X0002-4662: RNCC: 3 | RNVC: 2
UM8-12X150: RNCC: 3 | RNVC: 2
F0532S4710X0002-4662: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-348-7368
Tube Fitting Clinch Sleeve

143487368
105-18P: RNCC: 3 | RNVC: 2
10518P: RNCC: 5 | RNVC: 2

19 Apr 1978

4730-14-490-0782
Pipe Expansion Joint

144900782
3-1-96-0428: RNCC: 3 | RNVC: 2

10 Sep 1997

4730-14-252-9750
Tube To Boss Straight Adapter

142529750
9GAZC08-10XG1-4: RNCC: 3 | RNVC: 2
9GAZC08-10XG1-4: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-400-7099
Flange To Tube Straight Adapter

144007099
J05085-04-0600P013: RNCC: 3 | RNVC: 2

8 May 1985

4730-14-489-6345
Tube Fitting Socket Welded Ferrule

144896345
332A55-1088-00: RNCC: 3 | RNVC: 2

6 Aug 1997

4730-14-431-3863
Tube To Boss Straight Adapter

144313863
F4BXS8-1-4: RNCC: 3 | RNVC: 2
F4BXS8-1-4: RNCC: 3 | RNVC: 9
91641525: RNCC: 5 | RNVC: 2
F4BXS8-1/4: RNCC: 5 | RNVC: 9

14 Apr 1989

4730-14-405-0712
Tube-Hose Fitting Compression Sleeve

144050712
243GCU1/2 18: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-356-7624

4730-14-366-5896

4730-14-435-7725
Obturateurs Tuyaute

144357725
8211851180: RNCC: 3 | RNVC: 2

22 Nov 1989

4730-14-365-2889

4730-14-279-1653

4730-14-365-2863

4730-14-264-6589
Tube To Boss Straight Adapter

142646589
52-20-21-27C0: RNCC: 3 | RNVC: 2
4L20-21-27C0: RNCC: 3 | RNVC: 2
MCL20-27: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-344-6423
Tube To Boss Straight Adapter

143446423
NO PRIMARY REF14-344-6423: RNCC: 3 | RNVC: 2
449188: RNCC: 5 | RNVC: 2
PDA49188: RNCC: 5 | RNVC: 9

9 Sep 1977

4730-14-031-6479
Tube Coupling Inverted Nut

140316479
Q1-5T38SEQUIPE: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-228-6925
Tube Coupling

142286925
GSM1297FC1TABLEAU2D1-14: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-441-4886
Tube Coupling

144414886
332A72-1015-20: RNCC: 3 | RNVC: 2

30 Aug 1990

4730-14-316-8212
Corps De Presse-Eto

143168212
NO PRIMARY REF14-316-8212: RNCC: 3 | RNVC: 2
18-200DETD: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-366-6011

4730-14-526-2285
Tube To Boss Straight Adapter

145262285
H102074: RNCC: 3 | RNVC: 2

11 Jul 2001

4730-14-361-5559
Swivel Retaining Pipe Flange

143615559
02030010400: RNCC: 3 | RNVC: 2
020300104: RNCC: 5 | RNVC: 2

24 Jan 1980

4730-14-387-8831
Tube To Boss Straight Adapter

143878831
742DGA06: RNCC: 3 | RNVC: 2
74742DGA06: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-398-9841
Self-Sealing Coupling Assembly

143989841
223724: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-411-5056
Tube Coupling

144115056
RF160: RNCC: 3 | RNVC: 2

6 Aug 1986

4730-14-379-3597
Fluid Pressure Line Multiple Connector

143793597
3106180: RNCC: 3 | RNVC: 2
E3106180: RNCC: 5 | RNVC: 2

1 Oct 1982

4730-14-504-5978
Hose To Boss Straight Adapter

145045978
09930009: RNCC: 3 | RNVC: 2

25 Feb 1998

4730-14-212-2329
Fluid Pressure Line Multiple Connector

142122329
201471: RNCC: 3 | RNVC: 2
8472014710: RNCC: 3 | RNVC: 2
37800469: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-514-6260
Tube Coupling

145146260
10000D30223: RNCC: 3 | RNVC: 2

3 Jun 1999

4730-14-378-4626
Bulkhead Hose Connector

143784626
8811746201: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-274-6510
Tube To Boss Straight Adapter

142746510
DLT045475: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-462-0039
Special-Shaped Hose Clamp

144620039
C65230: RNCC: 3 | RNVC: 2
C65230: RNCC: 5 | RNVC: 2

31 Mar 1993

4730-14-404-5966
Tube Coupling Inverted Nut

144045966
327021: RNCC: 3 | RNVC: 2
62864: RNCC: 5 | RNVC: 2
DBA327021: RNCC: 5 | RNVC: 9

20 Nov 1985

4730-14-215-2387
Raccord Special

142152387
A2-71272: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-268-8869
Tube To Boss Straight Adapter

142688869
631X4113: RNCC: 3 | RNVC: 2
U1-12E631X4113: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-338-2584
Purgeur Thermostati

143382584
9-2 1-2IN: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-271-5613
Fluid Passage Bolt

142715613
9777100001: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-517-9752
Fluid Pressure Line Multiple Connector

145179752
1503296300: RNCC: 3 | RNVC: 2

19 Jan 2000

4730-14-389-2049
Bulkhead Hose Connector

143892049
EA1M524-050: RNCC: 3 | RNVC: 2
85-692-4227: RNCC: 6 | RNVC: 9

29 Nov 1983

4730-14-576-1319
Hose Clamp

145761319
ABS0902-200: RNCC: 1 | RNVC: 2
ABS0902-200: RNCC: 3 | RNVC: 2
ABS0902-200: RNCC: 3 | RNVC: 9
ABS0902-200: RNCC: 5 | RNVC: 2

30 May 2013

4730-14-453-9660
Fluid Passage Bolt

144539660
99641305001: RNCC: 3 | RNVC: 2
437575-00: RNCC: 5 | RNVC: 2
99-651-305-001: RNCC: 5 | RNVC: 2

18 Mar 1992

4730-14-399-9609
Quick Disconnect Coupling Assembly

143999609
RBE6-1151LKV45: RNCC: 3 | RNVC: 2
UL19-45: RNCC: 5 | RNVC: 2

24 Apr 1985

4730-14-412-0677
Quick Disconnect Coupling Half

144120677
RBE08-1152FB: RNCC: 3 | RNVC: 2
RBE08-1152/FB: RNCC: 5 | RNVC: 2

30 Sep 1986

4730-14-573-3864
Quick Disconnect Coupling Half

145733864
1020.802M: RNCC: 3 | RNVC: 2

10 Oct 2012

4730-14-310-3284
Raccord De Jonction

143103284
7110: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-367-0424

4730-14-282-4765

4730-14-434-3693
Tube-Pipe Fitting Kit

144343693
332A22-1077-00: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-557-8846
Tube Coupling Nut

145578846
ECS2080-120: RNCC: 1 | RNVC: 2
ECS2080-120: RNCC: 3 | RNVC: 2

25 Jul 2008

4730-14-307-2446
Tube To Boss Straight Adapter

143072446
319A73-30-001: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-210-9633
Raccord Pour Tube

142109633
F3604-2X4: RNCC: 3 | RNVC: 9

1 Jan 1964

4730-14-439-2434
Tube Fitting Socket Welded Ferrule

144392434
332A52-1213-20: RNCC: 3 | RNVC: 2

25 Apr 1990

4730-14-329-9273
Tube Tee

143299273
NO PRIMARY REF14-329-9273: RNCC: 3 | RNVC: 2
681: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-448-8139
Tube To Gas Fitting Straight Adapter

144488139
LL116-CS2816L: RNCC: 3 | RNVC: 2

10 Jul 1991

4730-14-427-3379
Tube Tee

144273379
4730HDING406,4X8,8-168,3X4,5: RNCC: 2 | RNVC: 2

13 Oct 1988

4730-14-337-7654
Tube Tee

143377654
502-508-132-0: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-412-3219
Quick Disconnect Coupling Half

144123219
54191-045-1: RNCC: 3 | RNVC: 2
54191-045-1: RNCC: 5 | RNVC: 9

8 Oct 1986

4730-14-329-3582
Raccord Dinjecteur

143293582
24055021000: RNCC: 3 | RNVC: 2
24020021000: RNCC: 5 | RNVC: 2
240200210: RNCC: 5 | RNVC: 9
240550210: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-538-9666
Return Tube Bend

145389666
NGM0053236503745: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-503-1743
Bulkhead Hose Connector

145031743
RA1M534303130: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-522-0945
Tube Coupling Nut Assembly

145220945
CEJN.N125: RNCC: 3 | RNVC: 9

4 Oct 2000

4730-14-404-5949
Tube To Hose Straight Adapter

144045949
VDPV4523: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-231-0877
Tube Tee

142310877
R12X10X12L: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-528-3243
Flexible Tube Coupling Assembly

145283243
ES08A15RO22A45: RNCC: 3 | RNVC: 2

22 Jan 2002

4730-14-552-1112
Branched Tubing Connector

145521112
0000360260: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-406-7546
Tube Tee

144067546
T17: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-300-0277
Fluid Passage Bolt

143000277
004-1364: RNCC: 3 | RNVC: 2
8092921: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-238-7402
Tube To Boss Straight Adapter

142387402
153614: RNCC: 3 | RNVC: 2
5171082700: RNCC: 3 | RNVC: 2
710827: RNCC: 5 | RNVC: 1
710827: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-435-1393
Tube-Hose Fitting Compression Sleeve

144351393
01111400: RNCC: 3 | RNVC: 2

23 Oct 1989

4730-14-445-7248
Anchor And Reinforcement Pipe Clamp

144457248
98B18130001: RNCC: 3 | RNVC: 2
SP106ALIS: RNCC: 5 | RNVC: 2
40426404: RNCC: 5 | RNVC: 2

22 Feb 1991

4730-14-300-7486
Fluid Pressure Line Multiple Connector

143007486
411MA0295F19: RNCC: 3 | RNVC: 2
411MA295F19: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-367-7974
Quick Disconnect Coupling Half

143677974
S2624DG: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-509-6962
Tube To Boss Straight Adapter

145096962
742 VN 16: RNCC: 3 | RNVC: 2
742VN16: RNCC: 3 | RNVC: 2

28 Oct 1998

4730-14-278-8189

4730-14-356-0752

4730-14-315-9622

4730-14-268-1451
Raccord Verin

142681451
17-90363: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-556-4581
Tube-Hose Fitting Compression Sleeve

145564581
1824 08 00: RNCC: 3 | RNVC: 2

10 Mar 2008

4730-14-287-4202
Lubrication Fitting

142874202
9200041: RNCC: 3 | RNVC: 2
5516015661: RNCC: 5 | RNVC: 2
9-20-00-41: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-283-5504
Flexible Tube Coupling Assembly

142835504
DHS613-211.25: RNCC: 1 | RNVC: 2
L20-03: RNCC: 3 | RNVC: 2
DHS613-211-25: RNCC: 5 | RNVC: 2
L20-0-3: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-306-8601
Pipe Flange

143068601
RUAN7517-30: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-423-4467
Pipe Flange

144234467
UA50088006PN50-11B2SDB25: RNCC: 2 | RNVC: 2
4730HCPN50DN02511B2S: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-457-8026
Pipe Flange

144578026
4730JADN080-11D1S: RNCC: 2 | RNVC: 2

24 Sep 1992

4730-14-465-3871
Joint Compensateur

144653871
99A3-5: RNCC: 3 | RNVC: 2

22 Sep 1993

4730-14-509-1636
Tube To Boss Straight Adapter

145091636
KQU06-00: RNCC: 3 | RNVC: 2
ND1667: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-501-2725
Graisseur

145012725
704-001-160: RNCC: 3 | RNVC: 2
704.001.160: RNCC: 3 | RNVC: 2
F300 0T 025 3131: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-386-6133
Tube Coupling

143866133
9970-126-213: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-307-1941
Fluid Flow Restrictor

143071941
72-43995: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-305-6247
Tube To Boss Straight Adapter

143056247
9105131847: RNCC: 3 | RNVC: 2
I2-13-12-17BR: RNCC: 5 | RNVC: 9
I2-13-12X17BRHP: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-349-1026
Quick Disconnect Coupling Half

143491026
MRA04-1150/OD: RNCC: 3 | RNVC: 2
MR04-1150/OD: RNCC: 5 | RNVC: 2
MR4-1150-0D: RNCC: 5 | RNVC: 2

19 Apr 1978

4730-14-339-1592
Compensateur Axial

143391592
PN10-5BT1DN300: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-410-3005
Flange To Boss Elbow

144103005
332A58-5501-2301: RNCC: 3 | RNVC: 2

18 Jun 1986

4730-14-488-1692
Fluid Flow Restrictor

144881692
043-12-109: RNCC: 3 | RNVC: 2

18 Apr 1997

4730-14-577-1300
Tube Union

145771300
NSA855022-8: RNCC: 1 | RNVC: 2
NSA855022-8: RNCC: 3 | RNVC: 2
NSA855022-8: RNCC: 5 | RNVC: 2

12 Aug 2013

4730-14-361-2500
Tube To Boss Straight Adapter

143612500
J01375-02: RNCC: 3 | RNVC: 2

24 Jan 1980

4730-14-281-4720

4730-14-334-0316

4730-14-242-7987
Tube Tee

142427987
NG40901-4APL86N0M1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-537-7121
Straight Tubing Connector

145377121
D1/2" BSPP RACCORD DROIT: RNCC: 3 | RNVC: 2
D1/2"BSPP: RNCC: 3 | RNVC: 2

19 Nov 2003

4730-14-348-4184
Bulkhead Hose Connector

143484184
GSM425-004F63: RNCC: 3 | RNVC: 2
GSM425-04F63: RNCC: 5 | RNVC: 2

29 Mar 1978

4730-14-348-9446
Quick Disconnect Coupling Assembly

143489446
A1-24268: RNCC: 3 | RNVC: 2
A1X24268: RNCC: 5 | RNVC: 2

19 Apr 1978

4730-14-407-3769

4730-14-565-0129
Tube To Boss Straight Adapter

145650129
12-8F6MK4S: RNCC: 3 | RNVC: 2

29 Jun 2010

4730-14-566-7340
Branched Tubing Connector

145667340
2122706000: RNCC: 3 | RNVC: 2

13 Dec 2010

4730-14-233-2479
Buse Speciale

142332479
S11843DB: RNCC: 3 | RNVC: 2
S11843: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-365-9759

4730-14-438-0913
Tube To Boss Straight Adapter

144380913
NO PRIMARY REF14-438-0913: RNCC: 3 | RNVC: 2
287946: RNCC: 5 | RNVC: 9
287946: RNCC: 5 | RNVC: 9

7 Mar 1990

4730-14-565-7844
Tube Coupling Assembly

145657844
5005330276: RNCC: 1 | RNVC: 2
3440-00-00-01: RNCC: 3 | RNVC: 2
20711866: RNCC: 5 | RNVC: 2

22 Sep 2010

4730-14-416-4296
Flange To Hose Elbow

144164296
GSM166-010F23: RNCC: 3 | RNVC: 2

10 Jun 1987

4730-14-354-9593
Self-Sealing Coupling Assembly

143549593
RBE08-2708IAFB: RNCC: 3 | RNVC: 2
RBE8-2708IAFB: RNCC: 5 | RNVC: 2

20 Feb 1979

4730-14-423-4241
Pipe Flange

144234241
UA50088006PN100-11D1DN50: RNCC: 2 | RNVC: 2
4730HCPN100DN05011D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-512-6382
Quick Disconnect Cap

145126382
NO PRIMARY REF14-512-6382: RNCC: 3 | RNVC: 2
NNP 4730864529140: RNCC: 5 | RNVC: 9

17 Feb 1999

4730-14-448-1672
Quick Disconnect Coupling Half

144481672
RBE06-2100IADKRFBHP: RNCC: 3 | RNVC: 2
85-694-4122: RNCC: 6 | RNVC: 9

12 Jun 1991

4730-14-498-7507
Tube To Boss Straight Adapter

144987507
NO PRIMARY REF14-498-7507: RNCC: 3 | RNVC: 2
12-15-06-108: RNCC: 5 | RNVC: 9
121506108: RNCC: 5 | RNVC: 9
F300 0T 008 2458: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-428-9441
Pipe Flange

144289441
4730JAPN150DN250-11B2S-25: RNCC: 2 | RNVC: 2

28 Dec 1988

4730-14-404-5935
Fluid Pressure Line Multiple Connector

144045935
7-016-039: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-010-0326
Ecrouraccord

140100326
3130-52-20-010: RNCC: 3 | RNVC: 2

1 Jan 1961

4730-14-263-4983
Tube Coupling

142634983
R111814: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-431-9033
Quick-Disconnect Nipple

144319033
729832A: RNCC: 3 | RNVC: 2
729832A: RNCC: 3 | RNVC: 2
RAB0966: RNCC: 5 | RNVC: 2
729832A: RNCC: 5 | RNVC: 2

10 May 1989

4730-14-210-9764
Equerre Egale

142109764
507-8: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-278-8056

4730-14-457-8883
Contre Bride

144578883
CMT9030AF4DE16REP3: RNCC: 3 | RNVC: 2

26 Sep 1992

4730-14-431-1545
Pipe Flange

144311545
6784-1DR80A: RNCC: 3 | RNVC: 9

10 Apr 1989

4730-14-334-8365
Tube To Boss Straight Adapter

143348365
AK10X16-150N: RNCC: 3 | RNVC: 2

2 Jun 1976

4730-14-472-0736
Tube To Boss Straight Adapter

144720736
4A16-16X150C0NU: RNCC: 3 | RNVC: 2
204105304NU: RNCC: 5 | RNVC: 2

5 Oct 1994

4730-14-408-9447
Tube To Boss Straight Adapter

144089447
4A14L12-17CO: RNCC: 3 | RNVC: 9

9 Apr 1986

4730-14-468-6849
Bulkhead Hose Connector

144686849
A1-72846: RNCC: 3 | RNVC: 2

16 Mar 1994

4730-14-372-8062
Bulkhead Hose Connector

143728062
K99-008: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-414-2109
Pipeline Flexible Spacer

144142109
4270-37,5-110: RNCC: 3 | RNVC: 2

26 Jan 1987

4730-14-247-4015
Union

142474015
8GAZCY8-10XG1-2: RNCC: 3 | RNVC: 2
8GAZCY8-10XG1-2: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-561-6127
Pipe To Tube Straight Adapter

145616127
6-8F42EDMLOS: RNCC: 3 | RNVC: 2
20 250 100 1220: RNCC: 5 | RNVC: 2

5 Aug 2009

4730-14-480-0448
Tube Tee

144800448
34040600: RNCC: 3 | RNVC: 2
5005330159: RNCC: 5 | RNVC: 2
5005330159: RNCC: 6 | RNVC: 9

21 Feb 1996

4730-14-330-9572
Pipe Flange

143309572
100730: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-541-9058
Fluid Pressure Line Multiple Connector

145419058
SC021022: RNCC: 3 | RNVC: 2
ROD12: RNCC: 5 | RNVC: 9
ROD126: RNCC: 5 | RNVC: 9

2 Jul 2004

4730-14-543-8153
Tube To Boss Straight Adapter

145438153
560502061: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-385-2280
Fluid Pressure Line Multiple Connector

143852280
VDPV5119: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-410-6993
Flange To Tube Straight Adapter

144106993
5172273200: RNCC: 3 | RNVC: 2
722732: RNCC: 5 | RNVC: 2
722732: RNCC: 5 | RNVC: 2

9 Jul 1986

4730-14-454-1632
Pipe Flange

144541632
44162: RNCC: 3 | RNVC: 2

24 Mar 1992

4730-14-475-6409
Ens Bride Pour Tube

144756409
BSNGCVA176A: RNCC: 3 | RNVC: 2

24 Apr 1995

4730-14-417-7788
Tube To Boss Straight Adapter

144177788
LW110-NS1418S: RNCC: 3 | RNVC: 2
84011478NU: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-435-0556
Pipe Flange

144350556
MAT162-0060F12: RNCC: 3 | RNVC: 2

17 Oct 1989

4730-14-300-7501
Tube Tee

143007501
GSM523-026F23: RNCC: 3 | RNVC: 2
411MA127FA7: RNCC: 5 | RNVC: 2
GSM523-26F23: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-507-0297
Quick Disconnect Coupling Half

145070297
RBE06-1102/FB: RNCC: 3 | RNVC: 2

3 Jun 1998

4730-14-396-7037
Flange To Tube Cross

143967037
086-01-208: RNCC: 3 | RNVC: 2
7910420000: RNCC: 5 | RNVC: 2

27 Nov 1984

4730-14-555-1917
Quick Disconnect Coupling Half

145551917
RBE06.1100/IA/HPL/JV: RNCC: 3 | RNVC: 2

9 Oct 2007

4730-14-452-3321
Bulkhead Hose Connector

144523321
F0532S4710X0002-4986: RNCC: 3 | RNVC: 2
LW101-DW5380N: RNCC: 3 | RNVC: 2
S4710X0002-4986: RNCC: 5 | RNVC: 2

8 Jan 1992

4730-14-203-6508
Tube Tee

142036508
TA25: RNCC: 3 | RNVC: 2
TA25-25-25: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-280-8575
Pipeline Flexible Spacer

142808575
DILAT0FLEX150ACIDE8X22X240-7BAR: RNCC: 3 | RNVC: 9

1 Jan 1971

4730-14-351-5671
Quick Disconnect Coupling Assembly

143515671
NO PRIMARY REF14-351-5671: RNCC: 3 | RNVC: 2
5000500110: RNCC: 5 | RNVC: 2
59-13-1052: RNCC: 5 | RNVC: 9
5000500110: RNCC: 5 | RNVC: 9
5000500110: RNCC: 6 | RNVC: 9

12 Sep 1978

4730-14-487-0636
Hydraulic System Accessories Manifold

144870636
A03037-10-7000P003: RNCC: 3 | RNVC: 2

2 Apr 1997

4730-14-386-4574
Tube To Boss Straight Adapter

143864574
110-693-21-06: RNCC: 3 | RNVC: 2
85-800-9784: RNCC: 6 | RNVC: 9

24 Aug 1983

4730-14-040-7621
Tube To Boss Straight Adapter

140407621
7001-0016-0037: RNCC: 3 | RNVC: 2
000217005M: RNCC: 3 | RNVC: 2
SAF7001-0016-0037: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-377-2425
Bulkhead Hose Connector

143772425
366A55-1013-20: RNCC: 3 | RNVC: 2

17 May 1982

4730-14-451-9436
Tube Union

144519436
390A-12552: RNCC: 3 | RNVC: 2

12 Dec 1991

4730-14-490-5535
Quick Disconnect Coupling Half

144905535
J05085-04-0800P040: RNCC: 3 | RNVC: 2

2 Oct 1997

4730-14-405-0672

4730-14-407-1294
Pipe Flange

144071294
EMB580REPERE18: RNCC: 3 | RNVC: 2

5 Feb 1986

4730-14-212-9320
Fluid Passage Bolt

142129320
50211N: RNCC: 3 | RNVC: 2
50211N: RNCC: 5 | RNVC: 2
9567120020: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-281-5315
Tube To Boss Straight Adapter

142815315
X515735: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-309-7173
Clapet Racc Auto-Ob

143097173
A77346: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-539-2388
Quick Disconnect Plug

145392388
283-06: RNCC: 3 | RNVC: 2

17 Dec 2003

4730-14-405-4428
Tube Coupling

144054428
CB2A16 3/4: RNCC: 3 | RNVC: 9

27 Nov 1985

4730-14-334-2486
Tube Tee

143342486
GSM163-015F15: RNCC: 3 | RNVC: 2
GSM163-15F15: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-373-4853
Raccordem Manchette

143734853
GSM657-014F12REPD: RNCC: 3 | RNVC: 2
B0320-009F3REPD: RNCC: 5 | RNVC: 2

21 Oct 1981

4730-14-442-4513
Hose To Boss Straight Adapter

144424513
IF1033-160: RNCC: 3 | RNVC: 9

16 Oct 1990

4730-14-454-2971
Bulkhead Hose Connector

144542971
EA5M715-10-01: RNCC: 3 | RNVC: 2

26 Mar 1992

4730-14-318-9293
Tube To Gas Fitting Straight Adapter

143189293
A580-067: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-302-4736
Tube To Boss Straight Adapter

143024736
3180S54-10-065: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-290-1077
Sediment Strainer Element

142901077
NO PRIMARY REF14-290-1077: RNCC: 3 | RNVC: 2
DH501581: RNCC: 5 | RNVC: 9
501581: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-426-7872
Tube Tee

144267872
4730HEING114,3X17,5-48,3X7,1: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-356-1436
Bague-Ligature

143561436
NO PRIMARY REF14-356-1436: RNCC: 3 | RNVC: 2
4736E: RNCC: 5 | RNVC: 9

5 Apr 1979

4730-14-353-5573
Tube Coupling

143535573
9-28-32XG1: RNCC: 3 | RNVC: 2

16 Jan 1979

4730-14-333-5233
Barillet A 5 Voies

143335233
GSM163-022F4: RNCC: 3 | RNVC: 2
GSM163-22F4: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-206-6127
Bouchon Special

142066127
613-508-034-0: RNCC: 3 | RNVC: 2
613-508-034-0: RNCC: 8 | RNVC: 2

1 Jan 1964

4730-14-408-5842
Tube To Boss Straight Adapter

144085842
P4-1204-20-27X150: RNCC: 3 | RNVC: 2
91496814: RNCC: 5 | RNVC: 2

2 Apr 1986

4730-14-371-4799
Tube Tee

143714799
1TR10X12X10NU: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-408-0919
Hose To Boss Straight Adapter

144080919
0285321320: RNCC: 3 | RNVC: 2
91563891: RNCC: 5 | RNVC: 2

19 Mar 1986

4730-14-440-5076
Pipeline Flexible Spacer

144405076
DILATOFLEXKDN40YPPN16: RNCC: 3 | RNVC: 2

16 Jul 1990

4730-14-290-2061
Bulkhead Hose Connector

142902061
0260620720: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-350-4670
Pipe Flange

143504670
212439: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-341-4265
Threaded Tube Fitting Plug

143414265
BM3: RNCC: 3 | RNVC: 2
91358077: RNCC: 5 | RNVC: 2
98005: RNCC: 5 | RNVC: 9

16 Mar 1977

4730-14-485-3505
Anchor And Reinforcement Pipe Clamp

144853505
0288871540: RNCC: 3 | RNVC: 2

17 Jan 1997

4730-14-446-1455
Anchor And Reinforcement Pipe Clamp

144461455
45611471: RNCC: 3 | RNVC: 2
SPAL7073PP: RNCC: 5 | RNVC: 1
45611471: RNCC: 5 | RNVC: 9

6 Mar 1991

4730-14-562-8305
Blind Pipe Flange

145628305
BFX-OB-3000-1"1/4M: RNCC: 3 | RNVC: 2

25 Nov 2009

4730-14-516-2570
Quick Disconnect Coupling Half

145162570
H1-63: RNCC: 3 | RNVC: 2

15 Sep 1999

4730-14-553-1153
Tube To Boss Straight Adapter

145531153
GE12LREDOMDCF: RNCC: 3 | RNVC: 2
437190: RNCC: 5 | RNVC: 2
GE12LREDOMDCF: RNCC: 5 | RNVC: 9

5 Mar 2007

4730-14-373-9979
Bulkhead Hose Connector

143739979
7380-24: RNCC: 3 | RNVC: 9

8 Dec 1981

4730-14-466-3250
Quick Disconnect Coupling Half

144663250
RBE06-2708/OD/IC: RNCC: 3 | RNVC: 2
91745882: RNCC: 5 | RNVC: 2

3 Nov 1993

4730-14-228-6560
Tube To Boss Straight Adapter

142286560
12-35-39X200: RNCC: 3 | RNVC: 2
UMA35X39-200N: RNCC: 3 | RNVC: 2
4A35-39X200: RNCC: 3 | RNVC: 2
M35-39X2: RNCC: 3 | RNVC: 2
DLT021798: RNCC: 5 | RNVC: 2
DLT21798: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-360-0752
Rallonge De Valve

143600752
15040: RNCC: 3 | RNVC: 2
15040: RNCC: 5 | RNVC: 9

31 Oct 1979

4730-14-367-0453
Quick Disconnect Coupling Assembly

143670453
SS1-32BDG: RNCC: 3 | RNVC: 2

11 Dec 1980

4730-14-498-3206
Tube To Boss Straight Adapter

144983206
UMA12-20-1-5BSPCNU: RNCC: 3 | RNVC: 2
91952747: RNCC: 3 | RNVC: 2
F300 0T 004 7883: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-336-7702
Fluid Passage Bolt

143367702
NO PRIMARY REF14-336-7702: RNCC: 3 | RNVC: 2
23224860: RNCC: 5 | RNVC: 9

7 Oct 1976

4730-14-508-5977
Tube To Boss Straight Adapter

145085977
312-18593-001: RNCC: 3 | RNVC: 2

21 Sep 1998

4730-14-416-9027
Bulkhead Hose Connector

144169027
F521-07-15: RNCC: 3 | RNVC: 2

25 Jun 1987

4730-14-473-0478
Swivel Flange To Hose Straight Adapter

144730478
MAT513-5001F2: RNCC: 3 | RNVC: 2

6 Dec 1994

4730-14-457-7991
Pipe Flange

144577991
4730JADN015-11B2S: RNCC: 2 | RNVC: 2

24 Sep 1992

4730-14-307-6326
Pipe Flange

143076326
554-422-209MLEB: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-525-6273
Tube To Boss Straight Adapter

145256273
20 236 911 0020: RNCC: 3 | RNVC: 2
236-911-0020: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-449-7637
Tube Coupling

144497637
BN324-620DN40: RNCC: 2 | RNVC: 2

6 Sep 1991

4730-14-344-0112
Tube-Hose Fitting Compression Sleeve

143440112
01241600: RNCC: 3 | RNVC: 2
124-16-00: RNCC: 5 | RNVC: 2
1241600: RNCC: 5 | RNVC: 2

13 Jul 1977

4730-14-393-3869
Tube To Boss Straight Adapter

143933869
380117: RNCC: 3 | RNVC: 2
380117-UA9NFE: RNCC: 3 | RNVC: 2
70024171: RNCC: 3 | RNVC: 2
380117-UA9NFE: RNCC: 5 | RNVC: 9
70024171: RNCC: 5 | RNVC: 9

7 Apr 1984

4730-14-225-0143

4730-14-444-1086

4730-14-506-1952
Fluid Pressure Line Multiple Connector

145061952
L090: RNCC: 3 | RNVC: 2
RAQ0342: RNCC: 5 | RNVC: 2

9 Apr 1998

4730-14-479-9047
Tube To Boss Straight Adapter

144799047
200 322.01: RNCC: 3 | RNVC: 2
RI.413: RNCC: 5 | RNVC: 2
200322.01: RNCC: 5 | RNVC: 2
200322.01: RNCC: 5 | RNVC: 2
20032201: RNCC: 5 | RNVC: 2

14 Feb 1996

4730-14-516-6232
Pipe Fitting Assortment

145166232
03708700: RNCC: 3 | RNVC: 2

6 Oct 1999

4730-14-214-4965
Tube Tee

142144965
R6512: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-479-6543
Fluid Pressure Line Multiple Connector

144796543
1108-904: RNCC: 3 | RNVC: 2

30 Jan 1996

4730-14-509-6547
Bulkhead Hose Connector

145096547
RP2A523101007: RNCC: 3 | RNVC: 2

28 Oct 1998

4730-14-430-8832
Tube To Boss Straight Adapter

144308832
GE08LMEDA3C: RNCC: 3 | RNVC: 2
GE08LMEDA3C: RNCC: 3 | RNVC: 9
GE8PLMED: RNCC: 5 | RNVC: 9

29 Mar 1989

4730-14-277-9913
Fluid Pressure Line Multiple Connector

142779913
108843: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-457-6236
Tube To Boss Straight Adapter

144576236
PM1A753219001: RNCC: 3 | RNVC: 2
PM1A753219001: RNCC: 5 | RNVC: 2

10 Sep 1992

4730-14-479-1698
Pipeline Flexible Spacer

144791698
EVCYAC4: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-491-2174
Tube To Boss Straight Adapter

144912174
600633: RNCC: 3 | RNVC: 2
F300 0T 001 9244: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-430-9213
Adaptateur Raccord

144309213
160H732502-17: RNCC: 3 | RNVC: 2

29 Mar 1989

4730-14-527-4419
Tube To Boss Straight Adapter

145274419
V108559: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-262-4540
Tube To Boss Straight Adapter

142624540
12125: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-540-3081
Valve Adapter Assembly

145403081
10623279: RNCC: 3 | RNVC: 2

18 Mar 2004

4730-14-502-8785
Lubrication Fitting

145028785
9X2089: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-284-3938

4730-14-479-2030
Tu Droit Adaptateur

4730-14-413-0393

4730-14-434-2105

4730-14-418-2324

4730-14-483-5904
Raccord Orientable

4730-14-557-8059
Adapter And Flange Assembly

145578059
06030629-0: RNCC: 3 | RNVC: 2
P5 06030629-0: RNCC: 3 | RNVC: 9

16 Jul 2008

4730-14-416-4217
Tube To Boss Straight Adapter

144164217
AF3RAB8-1/4: RNCC: 3 | RNVC: 2
AF3RAB8-1/4: RNCC: 3 | RNVC: 9

10 Jun 1987

4730-14-418-4646
Fluid Pressure Line Multiple Connector

144184646
4-454538: RNCC: 3 | RNVC: 9
4-454538: RNCC: 5 | RNVC: 2
44402360: RNCC: 5 | RNVC: 2
4-454538: RNCC: 5 | RNVC: 9

26 Aug 1987

4730-14-432-7297
Bulkhead Hose Connector

144327297
OUT60110-4: RNCC: 3 | RNVC: 2
0UT60110-4: RNCC: 5 | RNVC: 2

21 Jun 1989

4730-14-428-5049
Fluid Passage Bolt

144285049
730.B.32: RNCC: 3 | RNVC: 2
P430B32: RNCC: 3 | RNVC: 2
74730B32: RNCC: 5 | RNVC: 2
164809: RNCC: 5 | RNVC: 2
730 B 32: RNCC: 5 | RNVC: 2
730B32: RNCC: 5 | RNVC: 2
74730B32: RNCC: 5 | RNVC: 2

8 Dec 1988

4730-14-494-4411
Tube Coupling

144944411
N53 128 70: RNCC: 3 | RNVC: 2
F300 0T 017 3342: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-415-2023
Tube Tee

144152023
4730HEEG060,3X2,9: RNCC: 2 | RNVC: 2
U1238F12DE60,3X2,9: RNCC: 5 | RNVC: 2

17 Apr 1987

4730-14-559-8907
Tube Tee

145598907
S40X S12 3/8: RNCC: 3 | RNVC: 2

2 Mar 2009

4730-14-508-8770
Straight Tubing Connector

145088770
RD10: RNCC: 3 | RNVC: 2
270150080: RNCC: 5 | RNVC: 2

5 Oct 1998

4730-14-552-3841
Tube Coupling

145523841
1660507: RNCC: 3 | RNVC: 2

18 Dec 2006

4730-14-503-2063
Tube Coupling

145032063
RP1A502123402: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-377-2070
Quick Disconnect Wye

143772070
2301535: RNCC: 3 | RNVC: 2
202304: RNCC: 5 | RNVC: 2

17 May 1982

4730-14-287-9731

4730-14-366-5939

4730-14-278-8100

4730-14-558-6191
Tube Tee

145586191
WAL037893: RNCC: 3 | RNVC: 2

17 Oct 2008

4730-14-285-4814

4730-14-202-3736

4730-14-225-0092
Bride

142250092
62287: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-237-7079
Vis De Genouillere

142377079
97137: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-338-0860
Tube Coupling Assembly

143380860
0-3951S25X32X25A: RNCC: 3 | RNVC: 2
0-3951S25X32X25A: RNCC: 5 | RNVC: 9
85-688-9442: RNCC: 6 | RNVC: 9

6 Nov 1976

4730-14-362-6869
Sediment Strainer Element

143626869
2704-000-0: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-207-0032
Vis Creuse De Fixat

142070032
NO PRIMARY REF14-207-0032: RNCC: 3 | RNVC: 2
3454-2: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-239-9477
Bride De Commande D

142399477
149-07T03-04: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-325-6227
Fluid Pressure Line Multiple Connector

143256227
121B71-605-00-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-372-9361
Pipe Expansion Joint

143729361
SK318: RNCC: 3 | RNVC: 2
DLT110091: RNCC: 5 | RNVC: 2
3-23157B: RNCC: 5 | RNVC: 2

21 Sep 1981

4730-14-290-9483

4730-14-575-5969
Hose Clamp

145755969
TORRO30-45/9C7W1: RNCC: 3 | RNVC: 2
726661: RNCC: 5 | RNVC: 2
126 7565 037: RNCC: 5 | RNVC: 2

17 Apr 2013

4730-14-483-6127
Quick-Disconnect Nipple

144836127
704A34-422-011: RNCC: 3 | RNVC: 2

24 Sep 1996

4730-14-275-0264
Tube Fitting Clinch Sleeve

142750264
U1134F12-10: RNCC: 2 | RNVC: 2
9124100050: RNCC: 5 | RNVC: 2
BCS10: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-410-8852
Quick Disconnect Coupling Half

144108852
RBE19-6154: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-577-2763
Tube To Boss Straight Adapter

145772763
ABS0920-12: RNCC: 1 | RNVC: 2
RFK9912-13: RNCC: 3 | RNVC: 2
32790LP12T: RNCC: 5 | RNVC: 2
ABS0920-12: RNCC: 5 | RNVC: 2

2 Sep 2013

4730-14-558-7614
Fluid Pressure Line Multiple Connector

145587614
CLU01-192: RNCC: 3 | RNVC: 2

3 Nov 2008

4730-14-455-9087
Bulkhead Hose Connector

144559087
PM1A729009224A1: RNCC: 3 | RNVC: 2
PM1A729009224A1: RNCC: 5 | RNVC: 2

11 Jun 1992

4730-14-455-9571
Bulkhead Hose Connector

144559571
PM1A728189030: RNCC: 3 | RNVC: 2
PM1A728189030: RNCC: 5 | RNVC: 2

11 Jun 1992

4730-14-236-9156
Tube To Boss Straight Adapter

142369156
615: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-430-8596
Pipeline Flexible Spacer

144308596
KARCNDN50PN16: RNCC: 3 | RNVC: 2

28 Mar 1989

4730-14-525-0730
Tube To Hose Straight Adapter

145250730
PE67409LE06: RNCC: 3 | RNVC: 2

16 May 2001

4730-14-366-2985

4730-14-321-6348
Tube To Boss Straight Adapter

143216348
702A30-1510-20: RNCC: 3 | RNVC: 2

7 Mar 1996

4730-14-304-2999
Fluid Pressure Line Multiple Connector

143042999
121E71-237-00-0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-566-1852
Hose Fitting Swaging Socket

145661852
NO PRIMARY REF 14-566-1852: RNCC: 3 | RNVC: 2
MS 11: RNCC: 5 | RNVC: 9
FS0000154: RNCC: 6 | RNVC: 9

26 Oct 2010

4730-14-505-6428
Fluid Pressure Line Multiple Connector

145056428
E25001278001: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-419-0220
Fluid Pressure Line Multiple Connector

144190220
COR4BRAB8-1/4: RNCC: 3 | RNVC: 2
COR4BRAB8-1/4: RNCC: 3 | RNVC: 9
C0R4BRAB8-1/4: RNCC: 5 | RNVC: 9

29 Sep 1987

4730-14-385-7095
Tube To Boss Straight Adapter

143857095
243GCU12 1-2: RNCC: 3 | RNVC: 2
243GC12 1-2: RNCC: 3 | RNVC: 9

26 Jul 1983

4730-14-282-0665
Raccord Et Tape

142820665
6510C5-5: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-423-7562
Double Mamelon

144237562
117507-1: RNCC: 3 | RNVC: 2

28 Apr 1988

4730-14-389-3109
Tube To Boss Straight Adapter

143893109
F4BRAB6-1/4: RNCC: 3 | RNVC: 2
F4BRAB6-1/4: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-563-7235
Tube Tee

145637235
SO23021-8: RNCC: 3 | RNVC: 2
128.3000.080: RNCC: 5 | RNVC: 2
SO23021-8: RNCC: 5 | RNVC: 2

9 Mar 2010

4730-14-320-4096
Tube Union

143204096
368 3-4: RNCC: 3 | RNVC: 2
290 3-4: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-480-5009
Tube Union

144805009
RMF26: RNCC: 3 | RNVC: 2
91585432: RNCC: 5 | RNVC: 2

14 Mar 1996

4730-14-290-0318

4730-14-040-4856
Fluid Pressure Line Multiple Connector

140404856
453-01-08: RNCC: 3 | RNVC: 2
608-12-90ARSJ: RNCC: 5 | RNVC: 2
85-689-8366: RNCC: 6 | RNVC: 9

1 Jan 1972

4730-14-031-5016
Tube-Hose Fitting Compression Sleeve

140315016
3313-0025-560337: RNCC: 3 | RNVC: 2
822-25216: RNCC: 5 | RNVC: 2

14 Jun 1980

4730-14-331-6942

4730-14-569-5745
Fluid Pressure Line Multiple Connector

145695745
57529174: RNCC: 3 | RNVC: 2

28 Sep 2011

4730-14-252-1701

4730-14-502-2699
Tube To Hose Straight Adapter

145022699
LL128-CS1004S: RNCC: 3 | RNVC: 2

3 Dec 1997

4730-14-575-7726
Flange Elbow

145757726
M2811343920000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-432-4146
Cvompensation Cale

144324146
I131CALEDN175MAR: RNCC: 3 | RNVC: 2

12 Jun 1989

4730-14-567-6115
Pipe True Wye

145676115
M5311601200000: RNCC: 3 | RNVC: 2

29 Mar 2011

4730-14-338-3623
Bague Pour Reductio

143383623
633X4006: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-501-2411
Tube To Boss Straight Adapter

145012411
474-501: RNCC: 3 | RNVC: 2
474.501: RNCC: 3 | RNVC: 2
F300 0T 025 2816: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-221-2183
Raccord A Joint Cou

142212183
GSM1297FE6-2TABLEAU2: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-276-2100
Porte-Joint Complet

142762100
6784-1DN50A: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-501-2394
Tube To Boss Straight Adapter

145012394
471-439: RNCC: 3 | RNVC: 2
471.439: RNCC: 3 | RNVC: 2
F300 0T 025 2799: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-464-9628
Pipe Flange

144649628
365A55-1045-20: RNCC: 3 | RNVC: 2

8 Sep 1993

4730-14-548-8832
Self-Sealing Coupling Assembly

145488832
0298117120: RNCC: 3 | RNVC: 2

21 Feb 2006

4730-14-396-0733
Tube To Boss Straight Adapter

143960733
0946737059: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-333-5178
Barillet A 6 Voies

143335178
GSM163-007BF35: RNCC: 3 | RNVC: 2
GSM163-07BF35: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-300-4984
Hose Coupling Assembly

143004984
9943245: RNCC: 3 | RNVC: 2
9943245A: RNCC: 3 | RNVC: 2
9-94-32-45A: RNCC: 5 | RNVC: 9
9943245A: RNCC: 5 | RNVC: 9
TAH1065-6: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-489-1827
Fluid-Emulsion Spray Nozzle

144891827
71251-2,8MM: RNCC: 3 | RNVC: 2
4400-22-A-F53-2,8MM: RNCC: 5 | RNVC: 2

2 Jul 1997

4730-14-297-0292
Bulkhead Hose Connector

142970292
121E52-323-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-282-0322

4730-14-536-6709
Tube To Boss Straight Adapter

145366709
IC2086-14-05: RNCC: 3 | RNVC: 2

10 Sep 2003

4730-14-301-7843
Sediment Strainer Element

143017843
3097-14-02-076: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-269-4433
Fuel Feeder Manifold

142694433
NO PRIMARY REF14-269-4433: RNCC: 3 | RNVC: 2
RAMPEAPR0PANE2FEUX: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-275-0303
Tube To Boss Straight Adapter

142750303
9114253466: RNCC: 3 | RNVC: 2
CA4-25-26-34: RNCC: 5 | RNVC: 9
CA4-25-26-34CYL: RNCC: 5 | RNVC: 9
CA4-25-26X34BSPHP: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-362-7420
Lubrication Fitting

143627420
MFM288-51: RNCC: 3 | RNVC: 2
MFM288-51: RNCC: 5 | RNVC: 2
85-691-1771: RNCC: 6 | RNVC: 9

19 Mar 1980

4730-14-203-0240
Pipe Flange

142030240
1521-56-29: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-462-8449
Ecrou Pour Raccord

144628449
302589-01-03: RNCC: 3 | RNVC: 2

5 May 1993

4730-14-334-2419
Fluid Pressure Line Multiple Connector

143342419
Q1-509-18-24X150: RNCC: 3 | RNVC: 2

23 Apr 1976

4730-14-327-4978
Tube To Boss Straight Adapter

143274978
9901-30-36-66: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-521-0994
Fluid Flow Restrictor

145210994
23REDN-LN320038B-DN20: RNCC: 3 | RNVC: 2
REDN-LN320038B-DN20: RNCC: 5 | RNVC: 2

7 Jul 2000

4730-14-412-2412
Fluid Pressure Line Multiple Connector

144122412
078-01-107-01: RNCC: 3 | RNVC: 2

8 Oct 1986

4730-14-257-2079
Tube Tee

142572079
330A72-6152-20: RNCC: 3 | RNVC: 2
330A72-6152-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-491-6074
Tube To Boss Straight Adapter

144916074
SVA04-03: RNCC: 3 | RNVC: 2
F300 0T 003 5972: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-471-9171
Bulkhead Hose Connector

144719171
1/2PPA48,3-85MM: RNCC: 3 | RNVC: 2

27 Sep 1994

4730-14-422-7294
Raccord Injection

144227294
R1-3-108: RNCC: 3 | RNVC: 2
9560140870: RNCC: 5 | RNVC: 2

17 Mar 1988

4730-14-489-1816
Fluid-Emulsion Spray Nozzle

144891816
70786-3,9MM: RNCC: 3 | RNVC: 2
4400-22-A-F54-3,9MM: RNCC: 5 | RNVC: 2

2 Jul 1997

4730-14-446-4702
Flange To Tube Elbow

144464702
0294202100: RNCC: 3 | RNVC: 2
302-255-202-0: RNCC: 5 | RNVC: 2

20 Mar 1991

4730-14-432-9117
Tube To Boss Straight Adapter

144329117
9NPTC06-8X1-4: RNCC: 3 | RNVC: 2

3 Jul 1989

4730-14-452-2222
Fluid-Emulsion Spray Nozzle

144522222
3/394/9/0646Z/REP41: RNCC: 3 | RNVC: 2

7 Jan 1992

4730-14-422-5378
Pipe Expansion Joint

144225378
E0009008DREP71: RNCC: 3 | RNVC: 2

9 Mar 1988

4730-14-389-2982
Bride Intermediaire

143892982
2-24764: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-204-3914

4730-14-270-5101

4730-14-306-7587
Bride A Zinc

143067587
000MA0782F4REP2DN50: RNCC: 3 | RNVC: 2
000MA782F4REP2DN50: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-270-1910

4730-14-457-9187
Mamelon A Braser

144579187
DLT024673: RNCC: 3 | RNVC: 2
RAR1567: RNCC: 5 | RNVC: 2

1 Oct 1992

4730-14-455-3793
Quick Disconnect Coupling Half

144553793
RBE06-2810-0DIA0JV: RNCC: 3 | RNVC: 2
91726926: RNCC: 5 | RNVC: 2
91727015: RNCC: 5 | RNVC: 2

21 May 1992

4730-14-457-8936
Tube Tee

144578936
4730JCING048,3X05-042,4X05: RNCC: 2 | RNVC: 2

26 Sep 1992

4730-14-490-6224
Tube To Boss Straight Adapter

144906224
MAT164-0353F24: RNCC: 3 | RNVC: 2

7 Oct 1997

4730-14-265-3051
Tube To Boss Straight Adapter

142653051
321A75-0861-20: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-385-2075
Quick Disconnect Coupling Half

143852075
73-081-010: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-345-2026
Fluid Pressure Line Multiple Connector

143452026
606-14-90ARSK: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-385-7759
Sediment Strainer Body

143857759
DIV104-08-01: RNCC: 3 | RNVC: 2
H320: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-509-1014
Tube Tee

145091014
00132987: RNCC: 3 | RNVC: 2
136280-00-15: RNCC: 5 | RNVC: 9
136280.00.15: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-571-5718
Fluid Pressure Line Multiple Connector

145715718
109-16/JE22X150: RNCC: 3 | RNVC: 2
109 16 JE 22 150: RNCC: 5 | RNVC: 2

10 Apr 2012

4730-14-282-6307
Conduite Dae Embout

142826307
R4A721-005M1: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-250-2079
Tube Tee

142502079
G17-42: RNCC: 3 | RNVC: 2
TAG42N: RNCC: 3 | RNVC: 2
10AG42: RNCC: 3 | RNVC: 2
TG42: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-546-2038
Quick Disconnect Coupling Half

145462038
RBE06.1102/IA/HP/JV: RNCC: 3 | RNVC: 2
RBE061102IAHPJV: RNCC: 5 | RNVC: 9

15 Jun 2005

4730-14-345-7569
Swivel Retaining Pipe Flange

143457569
A00808-00-0000P029: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-455-6904
Tube To Hose Straight Adapter

144556904
MAT166-0001T-F16REP4: RNCC: 3 | RNVC: 2

11 Jun 1992

4730-14-208-8948
Raccordsouple Equi

142088948
5180-25-120-4CS8AX: RNCC: 3 | RNVC: 2
AF25-85-4X: RNCC: 3 | RNVC: 2
HBT20DN25: RNCC: 5 | RNVC: 1
AF25-120-4X: RNCC: 5 | RNVC: 2
HBT10DN25: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-293-1087
Pipe Flange

142931087
581202-2Q: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-577-2762
Tube To Boss Straight Adapter

145772762
ABS0920-08: RNCC: 1 | RNVC: 2
RFK9908-13: RNCC: 3 | RNVC: 2
32790LP08T: RNCC: 5 | RNVC: 2
ABS0920-08: RNCC: 5 | RNVC: 2

2 Sep 2013

4730-14-319-9912
Tube To Boss Straight Adapter

143199912
05 114 12 12+05 010 12: RNCC: 3 | RNVC: 2
412-12-12: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-282-1110
Bloc De Raccordemen

142821110
11114EQ1: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-348-0538
Raccord Embout

143480538
A77386-1: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-457-5460
Tube To Boss Straight Adapter

144575460
AIWCYL13-3-8: RNCC: 3 | RNVC: 9
02101679: RNCC: 5 | RNVC: 2

10 Sep 1992

4730-14-319-5503
Tube To Boss Straight Adapter

143195503
H44026-6: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-332-5763
Tube Tee

143325763
319A73-37-090-05: RNCC: 3 | RNVC: 2
85-800-5486: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-553-8317
Lubrication Fitting

145538317
95-671001: RNCC: 3 | RNVC: 2

23 May 2007

4730-14-548-7408
Reducing Tube Coupling Nut

145487408
MAT862-3058A FEUILLE2: RNCC: 3 | RNVC: 2

6 Feb 2006

4730-14-302-5587
Tube Coupling

143025587
330A72-6090-21: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-261-3036
Tube To Boss Straight Adapter

142613036
175-77-17: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-398-5936
Tube Fitting Brazing Ferrule

143985936
4730AMF3DN250DE20-11: RNCC: 2 | RNVC: 2
GSM164-057F4Z0NEB: RNCC: 3 | RNVC: 2
MAT164-0354F4ZONEB: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-260-9174

4730-14-427-8453
Chapeau Serre-Joint

144278453
AS34TQ102FREP2: RNCC: 3 | RNVC: 2

16 Nov 1988

4730-14-420-1255
Fluid Pressure Line Multiple Connector

144201255
29739149: RNCC: 3 | RNVC: 2
29739149: RNCC: 5 | RNVC: 9

18 Nov 1987

4730-14-419-4337
Pipe Flange

144194337
B3051FS013F8A: RNCC: 3 | RNVC: 2

19 Oct 1987

4730-14-350-2418
Tube To Boss Straight Adapter

143502418
3902781: RNCC: 3 | RNVC: 2

14 Jun 1978

4730-14-213-7716
Fluid Passage Bolt

142137716
0057500300: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-428-3849
Fluid Pressure Line Multiple Connector

144283849
407C0102: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-260-9381

4730-14-224-3906
Tube Fitting Brazing Ferrule

142243906
GSM163-002DETHC: RNCC: 3 | RNVC: 2
GSM163-02DETHC: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-430-8800
Tube Coupling

144308800
10-232-032: RNCC: 3 | RNVC: 2

28 Mar 1989

4730-14-429-3658
Fluid Passage Bolt

144293658
755-2176: RNCC: 3 | RNVC: 2

18 Jan 1989

4730-14-404-8866
Tube To Boss Straight Adapter

144048866
366A72-1080-20: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-353-2856
Tube Tee

143532856
57-38: RNCC: 3 | RNVC: 2
TL38N: RNCC: 5 | RNVC: 2
10L38: RNCC: 5 | RNVC: 2

8 Dec 1978

4730-14-201-3213
Sediment Strainer Element

142013213
NO PRIMARY REF14-201-3213: RNCC: 3 | RNVC: 2
33301: RNCC: 5 | RNVC: 9

1 Jan 1962

4730-14-302-9971
Tube Fitting Brazing Ferrule

143029971
7062BB1B1966EMT2-30CUB: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-203-0574
Raccord Special

142030574
3202-5230711-000: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-484-9949
Pipe To Tube Straight Adapter

144849949
U1778-N43-16-085: RNCC: 3 | RNVC: 2
N43-16-085: RNCC: 5 | RNVC: 2

19 Dec 1996

4730-14-350-8060
Traversee De Cloiso

143508060
76299B: RNCC: 3 | RNVC: 2
85-800-6463: RNCC: 6 | RNVC: 9

12 Jul 1978

4730-14-295-2746
Bouchon Raccord Rap

142952746
RBE6-8500-09IC: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-566-6399
Pipeline Flexible Spacer

145666399
11161500-00: RNCC: 3 | RNVC: 2
A230406000020: RNCC: 5 | RNVC: 2

1 Dec 2010

4730-14-463-1210
Threaded Tube Fitting Plug

144631210
303293-05-01: RNCC: 3 | RNVC: 2

26 May 1993

4730-14-207-9090

4730-14-430-7497
Tube To Boss Straight Adapter

144307497
68506-960-1: RNCC: 3 | RNVC: 2
68506-960-1: RNCC: 5 | RNVC: 9

22 Mar 1989

4730-14-349-5153

4730-14-287-7944
Pipe Flange

142877944
6784-2CG10: RNCC: 2 | RNVC: 2

1 Jan 1972

4730-14-514-6316
Lubrication Fitting

145146316
325-013-0: RNCC: 3 | RNVC: 2

3 Jun 1999

4730-14-528-1330
Jeu De 4 Raccords

145281330
ACL287-03: RNCC: 3 | RNVC: 9

20 Dec 2001

4730-14-403-5150
Self-Sealing Coupling Assembly

144035150
N00322976: RNCC: 3 | RNVC: 2

21 Aug 1985

4730-14-306-7098
Raccord Special

143067098
100004695: RNCC: 3 | RNVC: 2
GIU3369: RNCC: 5 | RNVC: 2
GIU3369: RNCC: 5 | RNVC: 9

1 Jan 1974

Load More Results