What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 168 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 168 of 185

4730-14-494-1445
Tube To Boss Straight Adapter

144941445
33000: RNCC: 3 | RNVC: 2
F300 0T 015 7262: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-530-8164
Tube To Boss Straight Adapter

145308164
01012083: RNCC: 3 | RNVC: 2

8 Jul 2002

4730-14-423-4579
Pipe Flange

144234579
UA50088006PN150-11D1SDN32: RNCC: 2 | RNVC: 2
4730HCPN150DN03211D1S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-219-0318
Filtre Special

142190318
NO PRIMARY REF14-219-0318: RNCC: 3 | RNVC: 2
PR203290: RNCC: 5 | RNVC: 2
PR203290: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-357-5583
Tube To Boss Straight Adapter

143575583
1DM10-12-17CYL: RNCC: 3 | RNVC: 2
91359124: RNCC: 5 | RNVC: 2
91359124: RNCC: 5 | RNVC: 9
91359124: RNCC: 5 | RNVC: 9

7 Jun 1979

4730-14-260-9227
Pipe Flange

142609227
7062DB1F1M121XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-211-0826
Fluid Passage Bolt

142110826
18105: RNCC: 3 | RNVC: 2
18105: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-537-5941
Tube Coupling

145375941
5004845891: RNCC: 3 | RNVC: 2

12 Nov 2003

4730-14-328-2581
Pipe Flange

143282581
ZA29C9ZJ: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-297-8644
Tube To Boss Straight Adapter

142978644
NO PRIMARY REF14-297-8644: RNCC: 3 | RNVC: 2
DH500806: RNCC: 5 | RNVC: 9
500806: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-268-1162
Pipe Flange

142681162
6784-1CG10: RNCC: 2 | RNVC: 2
RUAN7528-10: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-394-5852
Tube Tee

143945852
1730-14: RNCC: 3 | RNVC: 9

28 Aug 1984

4730-14-469-2646
Tube To Boss Straight Adapter

144692646
922035: RNCC: 3 | RNVC: 2
Q1-5GE10S1/4BSPK: RNCC: 5 | RNVC: 2

15 Apr 1994

4730-14-458-3676
Fluid Flow Restrictor

144583676
AO 533-001: RNCC: 3 | RNVC: 2

20 Oct 1992

4730-14-332-2087
Lubrication Fitting

143322087
10-325-0041: RNCC: 3 | RNVC: 2
325-004-1: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-427-8951
Tube To Boss Straight Adapter

144278951
G38S71X: RNCC: 3 | RNVC: 2
G38S71X: RNCC: 3 | RNVC: 9
XG38-PS/1.4571: RNCC: 5 | RNVC: 9

19 Nov 1988

4730-14-222-7290
Tube Tee

142227290
GSM1297FE3-16TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-438-0919
Tube To Boss Straight Adapter

144380919
NO PRIMARY REF14-438-0919: RNCC: 3 | RNVC: 2
288606: RNCC: 5 | RNVC: 9
288606: RNCC: 5 | RNVC: 9

7 Mar 1990

4730-14-390-0455
Tube Tee

143900455
053.490.200: RNCC: 3 | RNVC: 2
53-490-200: RNCC: 5 | RNVC: 9

26 Jan 1984

4730-14-447-3141
Tube Fitting Clinch Sleeve

144473141
C108288-01: RNCC: 3 | RNVC: 2
108288: RNCC: 5 | RNVC: 9

15 May 1991

4730-14-407-2131
Hose To Boss Straight Adapter

144072131
NO PRIMARY REF14-407-2131: RNCC: 3 | RNVC: 2
89F10: RNCC: 5 | RNVC: 2
89F10: RNCC: 5 | RNVC: 9

12 Feb 1986

4730-14-500-0724
Fluid Passage Bolt

145000724
HSM20X1-5A3C: RNCC: 3 | RNVC: 2
F300 0T 024 0715: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-550-1265
Quick-Disconnect Nipple

145501265
GS47043-100: RNCC: 3 | RNVC: 2

1 Jun 2006

4730-14-466-1853
Air Shift Chamber Hose Adapter

144661853
16661585: RNCC: 3 | RNVC: 2

27 Oct 1993

4730-14-372-7791
Sediment Strainer Element

143727791
559023: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-370-2617
Tube-Hose Fitting Compression Sleeve

143702617
S2871CF: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-544-2904
Fluid Flow Restrictor

145442904
61368139: RNCC: 3 | RNVC: 2

18 Jan 2005

4730-14-552-5947
Hose To Boss Straight Adapter

145525947
6501MPA009D: RNCC: 3 | RNVC: 2

18 Jan 2007

4730-14-221-7051

4730-14-236-6346

4730-14-262-3105

4730-14-325-6820
Equ A Bride Raccord

143256820
0000367220: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-415-2064
Tube Tee

144152064
4730HEEG114,3X8,8: RNCC: 2 | RNVC: 2
U1238F13DE114,3X8,8: RNCC: 5 | RNVC: 2

17 Apr 1987

4730-14-563-9409
Tube Cap

145639409
314821-4: RNCC: 3 | RNVC: 2

29 Mar 2010

4730-14-354-8308

4730-14-437-5779
Fluid Pressure Line Multiple Connector

144375779
109-10-3JE16X150: RNCC: 3 | RNVC: 2
91460832: RNCC: 5 | RNVC: 2

7 Feb 1990

4730-14-437-3906
Hose To Gas Fitting Straight Adapter

144373906
01231313: RNCC: 3 | RNVC: 2
867-077: RNCC: 5 | RNVC: 2

31 Jan 1990

4730-14-537-4085
Anchor And Reinforcement Pipe Clamp

145374085
8103-01: RNCC: 3 | RNVC: 2

3 Nov 2003

4730-14-349-5930
Non-Metallic Connecting Sleeve

143495930
721-910-109: RNCC: 3 | RNVC: 2
21-91-01DN40: RNCC: 5 | RNVC: 2
285-6287: RNCC: 5 | RNVC: 2
721-910-109: RNCC: 5 | RNVC: 2

22 May 1978

4730-14-283-1077
Tube Tee

142831077
5809-14-18X150NN: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-223-2598
Raccord Tubulure

142232598
NO PRIMARY REF14-223-2598: RNCC: 3 | RNVC: 2
AT5601: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-471-4647
Sediment Strainer Element

144714647
FIG98020REP2: RNCC: 3 | RNVC: 2
20005234: RNCC: 3 | RNVC: 2
F101500: RNCC: 5 | RNVC: 2
90275/2REP2: RNCC: 5 | RNVC: 2
F101500REP2: RNCC: 5 | RNVC: 2
F101500REP2: RNCC: 5 | RNVC: 9

30 Aug 1994

4730-14-570-6020
Sediment Strainer Element

145706020
197-05: RNCC: 3 | RNVC: 2

10 Jan 2012

4730-14-367-0448

4730-14-261-4536

4730-14-347-1838

4730-14-329-3085
Bloc De Raccordemen

143293085
A0191-009: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-336-7402

4730-14-371-8008

4730-14-502-7758
Raccord

145027758
6V8640: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-321-4896
Prise De Pression

143214896
714243: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-359-8767
Bride Later Arr Tbd

143598767
2-16450: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-556-7048
Hose To Boss Straight Adapter

145567048
GA47799: RNCC: 3 | RNVC: 2

3 Apr 2008

4730-14-378-2400
Raccord Equipe

143782400
MAT001-04-00-1: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-536-4722
Hose Coupling Assembly

145364722
9-95-91-14: RNCC: 3 | RNVC: 2

27 Aug 2003

4730-14-562-5928
Pipeline Flexible Spacer

145625928
R1/100/KR 320-WG/P: RNCC: 3 | RNVC: 2

5 Nov 2009

4730-14-334-2458
Tube Tee

143342458
GSM163-004BF22: RNCC: 3 | RNVC: 2
GSM163-04BF22: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-434-4812
Bulkhead Hose Connector

144344812
R4A542-10-06: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-216-5571
Tube Coupling Inverted Nut

142165571
NO PRIMARY REF14-216-5571: RNCC: 3 | RNVC: 2
80158: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-506-4465
Tube To Boss Straight Adapter

145064465
16-042-11: RNCC: 3 | RNVC: 2
1604.211: RNCC: 3 | RNVC: 2
CAE00769: RNCC: 5 | RNVC: 2

29 Apr 1998

4730-14-237-6827
Raccord Multiple Co

142376827
NO PRIMARY REF14-237-6827: RNCC: 3 | RNVC: 2
21-107: RNCC: 5 | RNVC: 9
21107: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-313-4803
Bride Pour Chemise

143134803
GSM175-034F22: RNCC: 3 | RNVC: 2
A0181-003F6: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-441-1837
Tube To Gas Fitting Straight Adapter

144411837
5R6-6: RNCC: 3 | RNVC: 2
91631241: RNCC: 5 | RNVC: 2

22 Aug 1990

4730-14-290-9995
Tube Coupling

142909995
623-63-5: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-372-1286
Air Hose Connector

143721286
3104: RNCC: 3 | RNVC: 2
322071: RNCC: 3 | RNVC: 2
45390-2: RNCC: 5 | RNVC: 2

1 Sep 1981

4730-14-347-6368
Tube Coupling Assembly

143476368
0-3601SF16A: RNCC: 3 | RNVC: 2
0-3601SF16A: RNCC: 5 | RNVC: 9

1 Mar 1978

4730-14-509-1442
Hose To Boss Straight Adapter

145091442
HV6632116: RNCC: 3 | RNVC: 2
21151-6-6: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-455-3647
Tube Fitting Clinch Sleeve

144553647
5000276051: RNCC: 3 | RNVC: 2

21 May 1992

4730-14-491-8886
Tube To Boss Swivel Joint

144918886
NO PRIMARY REF14-491-8886: RNCC: 3 | RNVC: 2
377705: RNCC: 5 | RNVC: 9
F300 0T 005 8858: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-578-2046
Boss Outlet

145782046
A0152-06: RNCC: 3 | RNVC: 2
91891198: RNCC: 5 | RNVC: 2

12 Nov 2013

4730-14-041-7263
Can Filling Pipe And Hose Assembly

140417263
9892-10: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-380-9710
Tube Tee

143809710
130CU15-12-15: RNCC: 3 | RNVC: 2

14 Dec 1982

4730-14-350-8364
Tube To Boss Straight Adapter

143508364
7062BB1VPT2-10C337: RNCC: 2 | RNVC: 2

12 Jul 1978

4730-14-482-0396
Fluid Flow Restrictor

144820396
2115-0006-001: RNCC: 3 | RNVC: 2

15 Jun 1996

4730-14-268-6334
Tube Tee

142686334
Q1-5TR25X20X20NN: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-350-8427
Tube To Boss Straight Adapter

143508427
Q1-53-16-15X21: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-329-6272
Raccord Bloc

143296272
F726-014: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-423-4596
Pipe Flange

144234596
UA50088006PN250-11B2SDN25: RNCC: 2 | RNVC: 2
4730HCPN250DN02511B2S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-383-8718
Swivel Retaining Pipe Flange

143838718
U1198-38CUPR0ALU: RNCC: 3 | RNVC: 2
U1198-38CUPR0ALU: RNCC: 5 | RNVC: 2

11 Apr 1983

4730-14-495-1815
Tube To Boss Straight Adapter

144951815
NO PRIMARY REF14-495-1815: RNCC: 3 | RNVC: 2
CH265010: RNCC: 5 | RNVC: 9
F300 0T 018 6195: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-395-3176
Pipe Flange

143953176
CAA007-33,7FEMELLE: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-387-3676
Bulkhead Hose Connector

143873676
0294202080: RNCC: 3 | RNVC: 2
302-282-902P: RNCC: 5 | RNVC: 2

15 Sep 1983

4730-14-570-8566
Pipe To Gas Fitting Straight Adapter

145708566
AMJ 78 171: RNCC: 3 | RNVC: 2
AMJ 78 171: RNCC: 5 | RNVC: 2

30 Jan 2012

4730-14-512-6371
Pipe Flange

145126371
NO PRIMARY REF14-512-6371: RNCC: 3 | RNVC: 2
NNP 4730864526287: RNCC: 5 | RNVC: 9

17 Feb 1999

4730-14-314-2322
Tube To Boss Straight Adapter

143142322
160-888151-02: RNCC: 3 | RNVC: 2

13 Jan 2000

4730-14-541-0270
Pipeline Flexible Spacer

145410270
DILATOFLEX-K-GZ-DN350PN16-CERCLE: RNCC: 3 | RNVC: 2
A1/350/KG310-WG/E/ANNEAU VIDE: RNCC: 3 | RNVC: 2
ERV-JAUNE-DN350PN16-VSD: RNCC: 3 | RNVC: 9
SYQ5075: RNCC: 5 | RNVC: 2

5 May 2004

4730-14-227-3019
Bride

142273019
2-02276: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-375-5211
Tube To Boss Straight Adapter

143755211
FTXS8 1-8: RNCC: 3 | RNVC: 2
FTXS8-1-8: RNCC: 5 | RNVC: 9

26 Feb 1982

4730-14-382-3032
Fluid Pressure Line Multiple Connector

143823032
NO PRIMARY REF14-382-3032: RNCC: 3 | RNVC: 2
CMK334: RNCC: 5 | RNVC: 2
CMK334: RNCC: 5 | RNVC: 2
CMK334: RNCC: 5 | RNVC: 2

17 Feb 1983

4730-14-327-4444
Tube To Boss Straight Adapter

143274444
9101178047: RNCC: 3 | RNVC: 2
I1-17-20X150: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-271-8276
Tube To Boss Straight Adapter

142718276
UMA14-18X1-5: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-322-8181
Quick Disconnect Coupling Half

143228181
E29-573-15X21MALEEQUIPE: RNCC: 2 | RNVC: 2

1 Jan 1975

4730-14-222-7298
Tube Tee

142227298
GSM1297FE3-20TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-367-7784

4730-14-356-6864

4730-14-365-3079

4730-14-251-3930
Raccord

142513930
514725: RNCC: 3 | RNVC: 2
514725-00: RNCC: 5 | RNVC: 2
SOG514725: RNCC: 5 | RNVC: 9
1283S3-4: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-344-8082
Tube To Boss Straight Adapter

143448082
Q1-52-30-26X150: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-322-7377
Sediment Strainer Element

143227377
215008-200: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-542-6186
Swivel Retaining Pipe Flange

145426186
D1371-231-14: RNCC: 3 | RNVC: 2
D1371-231-14: RNCC: 3 | RNVC: 9

21 Jul 2004

4730-14-471-7090
Bulkhead Hose Connector

144717090
LN327-01505DN50: RNCC: 3 | RNVC: 2

13 Sep 1994

4730-14-444-8822
Quick Disconnect Coupling Half

144448822
RBO06-6810: RNCC: 3 | RNVC: 2

28 Jan 1991

4730-14-363-6632
Tube To Boss Straight Adapter

143636632
2K88720302: RNCC: 3 | RNVC: 2
K8872030: RNCC: 3 | RNVC: 2
UR19-77: RNCC: 3 | RNVC: 2
70020353: RNCC: 3 | RNVC: 2
2K88720302: RNCC: 5 | RNVC: 9
70020353: RNCC: 5 | RNVC: 9
K8872030: RNCC: 5 | RNVC: 9
UR19-77: RNCC: 5 | RNVC: 9

6 Jul 1980

4730-14-496-4109
Tube To Boss Straight Adapter

144964109
199944: RNCC: 3 | RNVC: 2
F300 0T 021 5010: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-323-5705
Tube To Boss Straight Adapter

143235705
001079282P: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-382-8815
Tube To Boss Straight Adapter

143828815
PE60841H18: RNCC: 3 | RNVC: 2

19 Apr 2000

4730-14-418-0452
Fluid Pressure Line Multiple Connector

144180452
13-230-01: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-413-4677
Quick Disconnect Coupling Half

144134677
RBE08-1103/IC/FB: RNCC: 3 | RNVC: 2
RBE08-1103ICFB: RNCC: 5 | RNVC: 2
RAR1383: RNCC: 5 | RNVC: 2

17 Dec 1986

4730-14-325-7401
Lubricant Pressure Relief Fitting

143257401
612-108-606-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-206-6026
Tube To Boss Straight Adapter

142066026
501-205-055-0: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-213-3647
Mamelon Special

142133647
613-512-011-0: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-527-3736
Tube Tee

145273736
H109483: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-444-8991
Sediment Strainer Element

144448991
D113068: RNCC: 3 | RNVC: 2
114705DREP10: RNCC: 5 | RNVC: 2

28 Jan 1991

4730-14-512-7398
Fluid Pressure Line Multiple Connector

145127398
800041105: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-031-6550
Tube To Boss Straight Adapter

140316550
S3051LM03AREP2: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-503-2070
Tube Coupling

145032070
RP1A504225178: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-244-0290

4730-14-543-6969
Tube Union

145436969
1000001626: RNCC: 3 | RNVC: 2

3 Dec 2004

4730-14-262-3055
Raccord

142623055
A73203: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-543-8226
Tube To Boss Straight Adapter

145438226
943421594: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-506-6333
Tube To Boss Straight Adapter

145066333
004537508Z: RNCC: 3 | RNVC: 2

30 Apr 1998

4730-14-242-5100
Tube Tee

142425100
TL8N: RNCC: 3 | RNVC: 2
10L8: RNCC: 3 | RNVC: 2
TL8: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-525-6289
Tube To Boss Straight Adapter

145256289
20 236 911 0310: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-211-6569
Fluid Passage Bolt

142116569
104609: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-284-5776
Tube Fitting Flared Sleeve

142845776
86417: RNCC: 3 | RNVC: 2
9567158360: RNCC: 5 | RNVC: 2
86417: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-301-9270
Lubrication Fitting

143019270
5002M14X150: RNCC: 3 | RNVC: 2
ALG5002M14X150: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-357-4125
Tube To Boss Straight Adapter

143574125
1031-913: RNCC: 3 | RNVC: 2

7 Jun 1979

4730-14-448-2819
Tube Repair Plug

144482819
38601: RNCC: 3 | RNVC: 2

18 Jun 1991

4730-14-332-4664
Tube Coupling

143324664
U1113F15VP20XC38: RNCC: 2 | RNVC: 2

2 Jul 1975

4730-14-455-1736
Fluid Flow Restrictor

144551736
170910: RNCC: 3 | RNVC: 2

7 May 1992

4730-14-325-9050
Pipe Flange

143259050
AS34TV104REP11: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-357-0923
Quick Disconnect Coupling Assembly

143570923
2427428940: RNCC: 3 | RNVC: 2
2427428940: RNCC: 5 | RNVC: 9

7 Jun 1979

4730-14-460-4087
Quick Disconnect Coupling Half

144604087
N00110593: RNCC: 3 | RNVC: 2
S00115393: RNCC: 5 | RNVC: 2

25 Jan 1993

4730-14-535-2436
Fluid Pressure Line Multiple Connector

145352436
6501COC5033: RNCC: 3 | RNVC: 2

14 May 2003

4730-14-407-1341
Buse De Reduction

144071341
02/C14042600: RNCC: 3 | RNVC: 2
C14042600: RNCC: 5 | RNVC: 2

11 Feb 1986

4730-14-451-7453
Quick Disconnect Coupling Half

144517453
RBE19-6819: RNCC: 3 | RNVC: 2

4 Dec 1991

4730-14-398-5935
Tube Fitting Brazing Ferrule

143985935
4730AMF3PN250DE14: RNCC: 2 | RNVC: 2
GSM164-057F3Z0NED: RNCC: 3 | RNVC: 2
MAT164-0354F3ZONED: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-342-2878
Tube Tee

143422878
LN324-061TYPEII: RNCC: 3 | RNVC: 2
M10-74A2: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-302-9826
Tube To Boss Straight Adapter

143029826
NO PRIMARY REF14-302-9826: RNCC: 3 | RNVC: 2
B4C361472REP4: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-453-3818
Fluid Pressure Line Multiple Connector

144533818
T6E22-14AFJBR: RNCC: 3 | RNVC: 2

19 Feb 1992

4730-14-466-2300
Pipeline Flexible Spacer

144662300
DILATOFLEX-NTMH-DN25PN16: RNCC: 3 | RNVC: 2

3 Nov 1993

4730-14-391-7115
Tube Tee

143917115
713 D 06 10 10: RNCC: 3 | RNVC: 2
P165D061010: RNCC: 3 | RNVC: 2
713D06-10-10: RNCC: 5 | RNVC: 2
713D061010: RNCC: 5 | RNVC: 2
74713D061010: RNCC: 5 | RNVC: 2
74713D061010: RNCC: 5 | RNVC: 2
713D06 10 10: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-287-5128
Tube Tee

142875128
EN10242-B1-2-ZN-A: RNCC: 2 | RNVC: 2
770130209: RNCC: 3 | RNVC: 2
130-2Z: RNCC: 5 | RNVC: 2
770 130 209: RNCC: 5 | RNVC: 2
E29801B1JZ: RNCC: 5 | RNVC: 9
50-2Z: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-553-3931
Bulkhead Hose Connector

145533931
M4721302920100: RNCC: 3 | RNVC: 2
M4721302920100: RNCC: 5 | RNVC: 2

29 Mar 2007

4730-14-537-0440
Special-Shaped Hose Clamp

145370440
CFCD1 20 44 W1: RNCC: 3 | RNVC: 2

24 Sep 2003

4730-14-537-4682
Tube To Boss Straight Adapter

145374682
6501OPC104: RNCC: 3 | RNVC: 2

3 Nov 2003

4730-14-382-8368
Pipe Flange

143828368
GSM1664EDN32: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-553-5996
Hose Fitting Swaging Socket

145535996
222 010 030: RNCC: 3 | RNVC: 2
MI18: RNCC: 3 | RNVC: 2

20 Apr 2007

4730-14-243-6120

4730-14-552-0359
Tube To Boss Straight Adapter

145520359
0000311840: RNCC: 3 | RNVC: 2

21 Nov 2006

4730-14-350-2718
Lubrication Fitting

143502718
9200429: RNCC: 3 | RNVC: 9
89472087: RNCC: 5 | RNVC: 2
5005097005: RNCC: 5 | RNVC: 2
5000277126: RNCC: 5 | RNVC: 9

14 Jun 1978

4730-14-257-0606
Raccord Bloc Dalime

142570606
A30758: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-267-8456

4730-14-501-4018
Tube To Boss Straight Adapter

145014018
NO PRIMARY REF14-501-4018: RNCC: 3 | RNVC: 2
84820000103159C: RNCC: 5 | RNVC: 9

29 Oct 1997

4730-14-381-0031
Tube To Boss Straight Adapter

143810031
01141417: RNCC: 3 | RNVC: 2
0114-14-17: RNCC: 5 | RNVC: 2
1141417: RNCC: 5 | RNVC: 2

14 Dec 1982

4730-14-309-2209
Tube To Boss Straight Adapter

143092209
NO PRIMARY REF14-309-2209: RNCC: 3 | RNVC: 2
S264321: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-262-4803
Raccord Special Equ

142624803
3265-20520-512: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-453-7688
Tube To Gas Fitting Straight Adapter

144537688
MAV10LRA3C: RNCC: 3 | RNVC: 2
MAV10LRA3C: RNCC: 3 | RNVC: 9
MAV 10-PLR: RNCC: 5 | RNVC: 9
MAV10PLR: RNCC: 5 | RNVC: 9

5 Mar 1992

4730-14-321-5804
Pipe Flange

143215804
U1092EB121: RNCC: 2 | RNVC: 2
7067E121: RNCC: 5 | RNVC: 9
7067E121C337CL2: RNCC: 5 | RNVC: 9
7067E121GAMMM11CU-AL9NI3FE2: RNCC: 5 | RNVC: 9
7067E121GAMMM12CU-AL9NI3FE2: RNCC: 5 | RNVC: 9
7068E121: RNCC: 5 | RNVC: 9
7068E121C337CL2: RNCC: 5 | RNVC: 9
7068E121GAMMM11CU-AL9NI3FE2: RNCC: 5 | RNVC: 9
7068E121GAMMM12CU-AL9NI3FE2: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-515-4941
Air Hose Connector

145154941
213188-1: RNCC: 3 | RNVC: 2

21 Jul 1999

4730-14-254-2738

4730-14-511-3448
Hydraulic System Accessories Manifold

145113448
D65718-1: RNCC: 3 | RNVC: 2

16 Dec 1998

4730-14-521-7753
Tube To Boss Straight Adapter

145217753
R32.16/22X50: RNCC: 3 | RNVC: 2
91313022: RNCC: 5 | RNVC: 2

13 Sep 2000

4730-14-501-2401
Tube To Boss Straight Adapter

145012401
471.506: RNCC: 3 | RNVC: 2
471-506: RNCC: 3 | RNVC: 2
F300 0T 025 2806: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-339-9868
Bulkhead Hose Connector

143399868
GSM425-024F13: RNCC: 3 | RNVC: 2
A0009-024F7: RNCC: 5 | RNVC: 2
A0009-031F13: RNCC: 5 | RNVC: 2
GSM425-24F13: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-401-8316
Bulkhead Hose Connector

144018316
B0206-009FS: RNCC: 3 | RNVC: 2

13 Jun 1985

4730-14-490-3018
Special-Shaped Hose Clamp

144903018
J05085-04-0100P049: RNCC: 3 | RNVC: 2

24 Sep 1997

4730-14-429-2907
Bulkhead Hose Connector

144292907
F530-07830: RNCC: 3 | RNVC: 2

11 Jan 1989

4730-14-208-8990
Raccordsouple Equi

142088990
AF12-70-4X: RNCC: 3 | RNVC: 2
HBT10DN12: RNCC: 5 | RNVC: 1

1 Jan 1964

4730-14-545-2795
Pipe Flange

145452795
LN320058-DN350-BRIDE CREUSE-PN16: RNCC: 3 | RNVC: 2
23REDN/LN320/058-DN350-PN16-F21: RNCC: 5 | RNVC: 2
SYQ5527: RNCC: 5 | RNVC: 2

31 Mar 2005

4730-14-507-4132
Tube To Boss Straight Adapter

145074132
LL018-CS1208L: RNCC: 3 | RNVC: 2

6 Jul 1998

4730-14-443-2838
Drainage Pipe Coupling

144432838
IB-07SPE/DIV50: RNCC: 3 | RNVC: 2
IB-007SPE: RNCC: 5 | RNVC: 2

14 Nov 1990

4730-14-425-1832
Pipe Flange

144251832
BN324-583F3DN40: RNCC: 2 | RNVC: 2

24 Jun 1988

4730-14-308-4709
Tube Fitting Brazing Ferrule

143084709
GSM163-011REP20-2-25F8: RNCC: 3 | RNVC: 2
GSM163-11AREP20-2-25: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-562-5230
Pipe Seal Nut

145625230
66-41.I: RNCC: 3 | RNVC: 2
66-41-I: RNCC: 5 | RNVC: 2

2 Nov 2009

4730-14-498-3205
Tube To Boss Straight Adapter

144983205
UMA12-20-1-5BSPC: RNCC: 3 | RNVC: 2
91952746: RNCC: 3 | RNVC: 2
F300 0T 004 7882: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-479-2434
Pipe Flange

144792434
LN320-039DN100: RNCC: 2 | RNVC: 2
RAB9368: RNCC: 5 | RNVC: 2

20 Dec 1995

4730-14-539-8289
Pipe Flange

145398289
MC2002-17: RNCC: 3 | RNVC: 2

11 Feb 2004

4730-14-316-8069
Fluid Pressure Line Multiple Connector

143168069
554-412-012DET8: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-458-3056
Quick Disconnect Coupling Half

144583056
HA 05352-16: RNCC: 3 | RNVC: 2
5010099228: RNCC: 5 | RNVC: 2

15 Oct 1992

4730-14-380-9707
Piece De Raccordeme

143809707
GSM164-064F4: RNCC: 3 | RNVC: 2

14 Dec 1982

4730-14-366-5902

4730-14-226-8287
Tube Tee

142268287
R060806: RNCC: 3 | RNVC: 2
R6X8X6: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-350-7280
Tube To Boss Straight Adapter

143507280
1020220034: RNCC: 3 | RNVC: 2
1020220034: RNCC: 5 | RNVC: 2

12 Jul 1978

4730-14-405-5707
Tube To Boss Straight Adapter

144055707
GE18LREDA3C: RNCC: 3 | RNVC: 2
GE18LREDA3C: RNCC: 3 | RNVC: 2
GE18PLRED: RNCC: 5 | RNVC: 2

4 Dec 1985

4730-14-549-2103
Pipe To Tube Straight Adapter

145492103
718011: RNCC: 3 | RNVC: 2

9 Mar 2006

4730-14-260-9271
Pipe Flange

142609271
7062DC1F1M36XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-370-4858
Tube Fitting Flared Sleeve

143704858
TXS16: RNCC: 3 | RNVC: 2
TXS16: RNCC: 3 | RNVC: 2
0242486010: RNCC: 5 | RNVC: 2
0242486010: RNCC: 5 | RNVC: 9
24248601: RNCC: 5 | RNVC: 9

18 May 1981

4730-14-365-9622

4730-14-565-0823
Tube Union

145650823
FUNPMB12M16: RNCC: 3 | RNVC: 2
FUNPMB12M16: RNCC: 5 | RNVC: 2

6 Jul 2010

4730-14-344-5646

4730-14-374-3063

4730-14-438-2403
Self-Sealing Coupling Assembly

144382403
4999-63-7: RNCC: 3 | RNVC: 2

7 Mar 1990

4730-14-327-1809
Racc A Sertir Bague

4730-14-429-5709
Fluid Pressure Line Multiple Connector

144295709
32549: RNCC: 3 | RNVC: 9
A0410-1: RNCC: 5 | RNVC: 9

31 Jan 1989

4730-14-468-2612
Self-Sealing Coupling Half

144682612
5400-S2-8: RNCC: 3 | RNVC: 2

16 Feb 1994

4730-14-345-5307
Tube Coupling

143455307
EA1M522-11-02: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-324-4962
Tube To Boss Straight Adapter

143244962
A60-71708: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-209-1249
Raccord Equipe

142091249
NO PRIMARY REF14-209-1249: RNCC: 3 | RNVC: 2
215331: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-333-5201
Barillet A 4 Voies

143335201
GSM163-018F16: RNCC: 3 | RNVC: 2
GSM163-18F16: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-562-2875
Packing Nut

145622875
CHA14-CPE DIAM150 A60: RNCC: 3 | RNVC: 2
FS0000439: RNCC: 6 | RNVC: 9

13 Oct 2009

4730-14-303-3098

4730-14-565-3333
Fluid Pressure Line Multiple Connector

145653333
311-010-14659: RNCC: 3 | RNVC: 2
N7101381459: RNCC: 5 | RNVC: 2

9 Aug 2010

4730-14-398-5912
Tube Fitting Brazing Ferrule

143985912
4730AMF2PN100DE36: RNCC: 2 | RNVC: 2
GSM164-062F8Z0NEA: RNCC: 3 | RNVC: 2
MAT164-0352F8ZONEA: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-369-7040
Tube-Hose Fitting Compression Sleeve

143697040
4730AB4.6POLYAM-DN14: RNCC: 2 | RNVC: 2
6016349000: RNCC: 3 | RNVC: 2
84241402: RNCC: 5 | RNVC: 2
LL023-NS14S: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-344-6988
Fluid Pressure Line Multiple Connector

143446988
EA1M713-10: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-518-0793
Fluid Passage Bolt

145180793
14251110M: RNCC: 3 | RNVC: 2

26 Jan 2000

4730-14-443-7342
Bulkhead Hose Connector

144437342
UCI18L: RNCC: 3 | RNVC: 9
91574140: RNCC: 5 | RNVC: 2

5 Dec 1990

4730-14-365-9609

4730-14-339-9884
Contre Bride

143399884
100-19: RNCC: 3 | RNVC: 9

18 Jan 1977

4730-14-402-2301
Equipe Raccord

144022301
TCG2029506: RNCC: 3 | RNVC: 2
85-692-9553: RNCC: 6 | RNVC: 9

26 Jun 1985

4730-14-565-2224
Tube Tee

145652224
837.050.075 S: RNCC: 3 | RNVC: 2
SA17617: RNCC: 5 | RNVC: 2

28 Jul 2010

4730-14-416-3317
Pipe Flange

144163317
E29203-11A-PN16DN32Z2CND17-12: RNCC: 2 | RNVC: 2

3 Jun 1987

4730-14-340-7745
Tube To Boss Straight Adapter

143407745
GSM164-041F24: RNCC: 3 | RNVC: 2
GSM164-05F71: RNCC: 5 | RNVC: 2

14 Feb 1977

4730-14-347-3120
Tube To Boss Straight Adapter

143473120
NO PRIMARY REF14-347-3120: RNCC: 3 | RNVC: 2
RT21204: RNCC: 5 | RNVC: 9

7 Nov 2001

4730-14-041-2480
Tube To Boss Straight Adapter

140412480
N410-88: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-378-3256
Pipe Flange

143783256
E64-35-3212-112BBRIDEDN300: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-543-5623
Tube Coupling Inverted Nut

145435623
OR/C14053521: RNCC: 3 | RNVC: 2
FS0003190: RNCC: 6 | RNVC: 9

23 Nov 2004

4730-14-333-6033
Tube Tee

143336033
1TMR8X14X12-17C0NU: RNCC: 3 | RNVC: 2
0946710108: RNCC: 5 | RNVC: 2
0946710108: RNCC: 5 | RNVC: 9
946710108: RNCC: 5 | RNVC: 9
946710108: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-414-5060
Tube To Boss Straight Adapter

144145060
LL130-CK38S: RNCC: 3 | RNVC: 2
8176380066: RNCC: 5 | RNVC: 2

5 Feb 1987

4730-14-482-7977
Quick Disconnect Coupling Half

144827977
PPAT2-8STL81: RNCC: 3 | RNVC: 2
A05100501: RNCC: 5 | RNVC: 2

25 Jul 1996

4730-14-518-0120
Pipe Elbow Assembly

145180120
3469-00-00-08: RNCC: 3 | RNVC: 2
5005330287: RNCC: 5 | RNVC: 2
3469000008: RNCC: 5 | RNVC: 9

21 Jan 2000

4730-14-273-5123
Tube To Boss Straight Adapter

142735123
7062BB1RCET2-36UA9: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-431-1577
Pipe Flange

144311577
6784-1EB38B: RNCC: 3 | RNVC: 9

10 Apr 1989

4730-14-346-7021
Pipe Flange

143467021
6784-1CH20-8A: RNCC: 2 | RNVC: 2
MEC11348: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-303-5631
Bulkhead Hose Connector

143035631
M5A781-008: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-496-9882
Fluid Pressure Line Multiple Connector

144969882
NO PRIMARY REF14-496-9882: RNCC: 3 | RNVC: 2
50-4934: RNCC: 5 | RNVC: 9
F300 0T 022 3962: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-300-7516
Tube Tee

143007516
GSM523-026F34: RNCC: 3 | RNVC: 2
411MA127FA23: RNCC: 5 | RNVC: 2
GSM523-26F34: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-398-5888
Tube Tee

143985888
GSM164-055F8: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-307-7211
Embout De Raccordem

143077211
466-7M8P66: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-567-3312
Flange To Tube Straight Adapter

145673312
M2821301800000: RNCC: 3 | RNVC: 2

7 Mar 2011

4730-14-547-4151
Pipeline Flexible Spacer

145474151
700004: RNCC: 3 | RNVC: 2

12 Oct 2005

4730-14-270-2481
Fluid Pressure Line Multiple Connector

142702481
9776100639: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-515-8481
Tube Coupling

145158481
5001008899: RNCC: 3 | RNVC: 2

17 Aug 1999

4730-14-396-0732
Tube To Boss Straight Adapter

143960732
0946737050: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-408-6585
Tube Tee

144086585
160G712109-20: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-524-9123
Fluid Flow Restrictor

145249123
RU10: RNCC: 3 | RNVC: 2

3 May 2001

4730-14-474-1701
Sediment Strainer Element

144741701
120-46DIA35BZ: RNCC: 3 | RNVC: 2

1 Feb 1995

4730-14-547-4726
Flexible Tube Coupling Assembly

145474726
S341A1115203: RNCC: 3 | RNVC: 2

14 Oct 2005

4730-14-496-3226
Tube To Boss Straight Adapter

144963226
108207: RNCC: 3 | RNVC: 2
F300 0T 021 3924: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-301-4894

4730-14-227-7834
Tube Tee

142277834
NO PRIMARY REF14-227-7834: RNCC: 3 | RNVC: 2
18F2: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-424-3421
Tube Tee

144243421
508-8CL10: RNCC: 3 | RNVC: 2
508-8CL5: RNCC: 5 | RNVC: 2

19 May 1988

4730-14-465-3921
Manchette Double

144653921
LN326056-21-DN20: RNCC: 3 | RNVC: 2

28 Sep 1993

4730-14-333-5242
Barillet A 6 Voies

143335242
GSM163-023F5: RNCC: 3 | RNVC: 2
GSM163-23F5: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-330-4390
Fluid Passage Bolt

143304390
613-539-088-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-552-1122
Branched Tubing Connector

145521122
0249867080: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-459-0925
Self-Sealing Coupling Assembly

144590925
96083585: RNCC: 3 | RNVC: 2

19 Nov 1992

4730-14-032-1554
Pipe Flange

140321554
CMT30E9030AF3ET3BISDE30REP3: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-544-5683
Lubrication Fitting

145445683
1021806: RNCC: 3 | RNVC: 2

10 Feb 2005

4730-14-415-4952
Fluid Pressure Line Multiple Connector

144154952
PDP0262: RNCC: 3 | RNVC: 2

18 May 1987

4730-14-392-9348
Tube Tee

143929348
0024248362: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-523-2268
Self-Sealing Coupling Half

145232268
GA31160: RNCC: 3 | RNVC: 2

10 Jan 2001

4730-14-405-3597
Tube Tee

144053597
5172030900: RNCC: 3 | RNVC: 2
720309: RNCC: 5 | RNVC: 9
36151727: RNCC: 5 | RNVC: 9

27 Nov 1985

4730-14-408-3872
Tube To Boss Straight Adapter

144083872
LV154-NS2008S: RNCC: 3 | RNVC: 2
84500462NU: RNCC: 5 | RNVC: 2

19 Mar 1986

4730-14-399-1343
Tube Coupling Inverted Nut

143991343
21573019: RNCC: 3 | RNVC: 2
615170: RNCC: 5 | RNVC: 2
615170: RNCC: 6 | RNVC: 9

6 Mar 1985

4730-14-536-0469
Tube To Hose Straight Adapter

145360469
PE65404TE0806: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-032-3098
Tube Tee

140323098
8408142166: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-426-7714
Tube Tee

144267714
4730HEING060,3X4-33,7X3,2: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-478-6333
Fuel Feeder Manifold

144786333
307-835-006-0: RNCC: 3 | RNVC: 2
307-835-004-0: RNCC: 5 | RNVC: 2

8 Nov 1995

4730-14-405-4408
Tube Repair Plug

144054408
R3: RNCC: 3 | RNVC: 2

27 Nov 1985

4730-14-524-5228
Tube To Boss Straight Adapter

145245228
809981: RNCC: 3 | RNVC: 2

21 Mar 2001

4730-14-346-0856
Pipe Flange

143460856
S3Z79423232: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-378-8635
Pipe Flange

4730-14-246-8915

4730-14-541-9141
Bulkhead Hose Connector

145419141
8216L12 00: RNCC: 3 | RNVC: 2

2 Jul 2004

4730-14-561-7874
Tube Tee

145617874
18692: RNCC: 3 | RNVC: 2

7 Sep 2009

4730-14-349-0649
Raccord Special

143490649
ADI139: RNCC: 3 | RNVC: 2

19 Apr 1978

4730-14-419-4336
Pipe Flange

144194336
B3051FS013F7A: RNCC: 3 | RNVC: 2

19 Oct 1987

4730-14-249-3732

4730-14-561-6102
Lubrication Fitting

145616102
07025006: RNCC: 3 | RNVC: 2
7025 006: RNCC: 3 | RNVC: 2
7025006: RNCC: 5 | RNVC: 2
15407: RNCC: 5 | RNVC: 2
7025 006: RNCC: 5 | RNVC: 2
0051473: RNCC: 5 | RNVC: 2

4 Aug 2009

4730-14-368-0617
Pipe Flange

143680617
N3051TR7AF46A: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-354-7523
Fluid Pressure Line Multiple Connector

143547523
150186: RNCC: 3 | RNVC: 2

20 Feb 1979

4730-14-421-5236
Tube Coupling

144215236
MVJJC: RNCC: 3 | RNVC: 9

18 Jan 1988

4730-14-414-5010
Tube To Boss Straight Adapter

144145010
84066700NU: RNCC: 3 | RNVC: 2

4 Feb 1987

4730-14-242-8010

4730-14-495-5630
Tube To Boss Straight Adapter

144955630
S48375-14: RNCC: 3 | RNVC: 2
F300 0T 019 4823: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-343-7810
Raccord Bloc

143437810
F726-10: RNCC: 3 | RNVC: 2

13 Jul 1977

4730-14-288-6257
Tube To Boss Straight Adapter

142886257
F3BPL8/10-1/4: RNCC: 3 | RNVC: 2
F3BPL8/10-1/4: RNCC: 3 | RNVC: 2
F3BPLB10X1 1-4: RNCC: 5 | RNVC: 2
202362051150: RNCC: 5 | RNVC: 2
F3BPL8-10-1-4: RNCC: 5 | RNVC: 2
9PL8-10X1-4GAZC0: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-536-3527
Fluid Pressure Line Multiple Connector

145363527
019343: RNCC: 3 | RNVC: 2

29 Jul 2003

4730-14-541-7931
Tube To Boss Straight Adapter

145417931
E63705000002: RNCC: 3 | RNVC: 2

26 Jun 2004

4730-14-509-8645
Tube Coupling

145098645
3854: RNCC: 3 | RNVC: 2
DBA3854: RNCC: 5 | RNVC: 9
4730AA1064353: RNCC: 6 | RNVC: 9

4 Nov 1998

4730-14-504-0590
Tube Coupling

145040590
NNP4730878750137: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-447-3689
Hydraulic System Accessories Manifold

144473689
45611425: RNCC: 3 | RNVC: 2
45611425: RNCC: 5 | RNVC: 9

15 May 1991

4730-14-562-6356
Tube Tee

145626356
788 D 08 08 08TF Z7: RNCC: 3 | RNVC: 2
788D080808TFZ7: RNCC: 5 | RNVC: 2

10 Nov 2009

4730-14-250-3994
Fluid Passage Bolt

142503994
26321: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-452-9993
Tube Tee

144529993
L353152: RNCC: 3 | RNVC: 2
DBAL353152: RNCC: 5 | RNVC: 9

29 Jan 1992

4730-14-422-1912
Pipe Flange

144221912
D05174201: RNCC: 3 | RNVC: 2

24 Feb 1988

4730-14-505-6870
Quick-Disconnect Nipple

145056870
A37846: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-346-7050
Plaque De Reduction

143467050
6784-1DH28-14A: RNCC: 2 | RNVC: 2
MEC11222: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-429-2900
Tube Embase

144292900
F530-01810: RNCC: 3 | RNVC: 2

11 Jan 1989

4730-14-445-5769
Quick Disconnect Coupling Half

144455769
0799-1305: RNCC: 3 | RNVC: 2
SAF0799-1305: RNCC: 5 | RNVC: 9

18 Feb 1991

4730-14-516-8732
Self-Sealing Coupling Half

145168732
2102-01-14-00: RNCC: 3 | RNVC: 9

20 Oct 1999

4730-14-355-5572
Tube To Boss Straight Adapter

143555572
AA16X22-150N: RNCC: 3 | RNVC: 2
1DM16-22X150: RNCC: 3 | RNVC: 2
P4-1DM16-22X150: RNCC: 5 | RNVC: 2

19 Mar 1979

4730-14-509-1808
Tube To Boss Straight Adapter

145091808
KQH08-U01: RNCC: 3 | RNVC: 2
ND1383: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-342-4121
Tube-Hose Fitting Compression Sleeve

143424121
105-16P: RNCC: 3 | RNVC: 2
105-16: RNCC: 5 | RNVC: 2
0024387008: RNCC: 5 | RNVC: 2
0024387008: RNCC: 5 | RNVC: 9
F300 0T 018 2060: RNCC: 6 | RNVC: 9

16 May 1977

4730-14-436-0935
Pipe Flange

144360935
MB1: RNCC: 3 | RNVC: 2
23.249-TER: RNCC: 5 | RNVC: 2

5 Dec 1989

4730-14-513-6102
Pipeline Air Drier And Cooler

145136102
C50-220AR: RNCC: 3 | RNVC: 2

29 Mar 1999

4730-14-389-7653
Distribut De Graiss

143897653
746217: RNCC: 3 | RNVC: 2
85-692-4847: RNCC: 6 | RNVC: 9

20 Dec 1983

4730-14-511-5597
Pipeline Flexible Spacer

145115597
E1J-4138-01: RNCC: 3 | RNVC: 2
E1J-4138-01: RNCC: 5 | RNVC: 2

5 Jan 1999

4730-14-567-2565
Quick Disconnect Coupling Half

145672565
10 308 80: RNCC: 3 | RNVC: 2

25 Feb 2011

4730-14-254-2502

4730-14-356-6793

4730-14-366-5851

4730-14-219-7394
Raccord

142197394
NO PRIMARY REF14-219-7394: RNCC: 3 | RNVC: 2
127L470: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-273-5362
Pipe Flange

142735362
7062TD1F1M121-4UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-309-4286

4730-14-446-2390
Tube Coupling

144462390
053.454.000: RNCC: 3 | RNVC: 2
53-454-0: RNCC: 5 | RNVC: 9

11 Mar 1991

4730-14-408-8552
Fluid Passage Bolt

144088552
20846070: RNCC: 3 | RNVC: 2
2-084607-0: RNCC: 5 | RNVC: 9
F300 0T 022 7687: RNCC: 6 | RNVC: 9

2 Apr 1986

4730-14-409-1788
Embout

144091788
58010-378-1: RNCC: 3 | RNVC: 9

23 Apr 1986

4730-14-350-6768
Pipe Flange

143506768
0024881017: RNCC: 3 | RNVC: 2
0024881017: RNCC: 5 | RNVC: 9
24881017: RNCC: 5 | RNVC: 9

12 Jul 1978

4730-14-381-9214
Tube To Boss Straight Adapter

143819214
GA70841: RNCC: 3 | RNVC: 2

25 Jan 1983

4730-14-415-1967
Tube Tee

144151967
4730HEEG026,9X2: RNCC: 2 | RNVC: 2
U1238F12DE26,9X2: RNCC: 5 | RNVC: 2

17 Apr 1987

4730-14-391-2986
Pipe Clamp Coupling

143912986
4894: RNCC: 3 | RNVC: 9

1 Mar 1984

4730-14-543-8020
Tube To Boss Straight Adapter

145438020
9321401: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-262-7578
Quick Disconnect Coupling Assembly

142627578
123317SD: RNCC: 3 | RNVC: 9

1 Jan 1970

4730-14-547-5600
Bulkhead Hose Connector

145475600
RA1B533303190: RNCC: 3 | RNVC: 2

15 Oct 2005

4730-14-287-7899
Pipe Flange

142877899
RUAN7625M912P6G: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-202-5285
Tube Tee

142025285
R6SX6X8: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-478-5967
Pipe To Hose Straight Adapter

144785967
RAC538080012: RNCC: 3 | RNVC: 2

8 Nov 1995

4730-14-313-4616
Pipe Flange

143134616
0225507302: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-454-6062
Tube To Boss Straight Adapter

144546062
0149181000: RNCC: 3 | RNVC: 2
149181: RNCC: 5 | RNVC: 2
LV035-NS1216S: RNCC: 5 | RNVC: 2
LV035-NS1216S: RNCC: 5 | RNVC: 2
UMFA20.27X26.34SL: RNCC: 5 | RNVC: 2

8 Apr 1992

4730-14-534-3843
Straight Tubing Connector

145343843
08543076: RNCC: 3 | RNVC: 2

21 Mar 2003

4730-14-401-2802
Hose To Boss Straight Adapter

144012802
601513: RNCC: 3 | RNVC: 2

5 Jun 1985

4730-14-326-9711
Tuyau A Spirale Cre

143269711
4253-89-390-2CS18TX: RNCC: 3 | RNVC: 2
4253-89-2CS18TX390: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-531-5869
Quick-Disconnect Nipple

145315869
MAT162-0208DA76,1PN16: RNCC: 3 | RNVC: 2

2 Sep 2002

4730-14-484-2659
Fluid Pressure Line Multiple Connector

144842659
6AR12M18KDVO: RNCC: 3 | RNVC: 2
613-988-569-0: RNCC: 5 | RNVC: 2

31 Oct 1996

4730-14-390-5033
Tube Union

143905033
F5BXS20-3-4: RNCC: 3 | RNVC: 2
F5BXS20-3-4: RNCC: 5 | RNVC: 2

26 Jan 1984

4730-14-563-1467
Hose Clamp

145631467
085520027: RNCC: 3 | RNVC: 2
08 5 520 027: RNCC: 5 | RNVC: 2
91896052: RNCC: 5 | RNVC: 2

7 Jan 2010

4730-14-225-2690
Bouchon De Trou Pur

142252690
D1054-531: RNCC: 3 | RNVC: 2
D1054-531: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-505-3360
Tube Union

145053360
GE30-PSR-ED-0MD: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-483-3763
Tuyere Ejecteur Air

144833763
V0595-48PGREP7-11-12-13-22: RNCC: 3 | RNVC: 2

6 Sep 1996

4730-14-414-6509
Tube Tee

144146509
LL8450-08-59UK: RNCC: 3 | RNVC: 2
8450085966NU: RNCC: 5 | RNVC: 2

20 Feb 1987

4730-14-350-2691
Tube Tee

143502691
9104170001: RNCC: 3 | RNVC: 2
A7-17-7: RNCC: 5 | RNVC: 9

14 Jun 1978

4730-14-208-5644
Tube To Boss Straight Adapter

142085644
MT0877: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-505-7042
Tube Tee

145057042
3804-06-00: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-324-8790
Threaded Tube Fitting Plug

143248790
330A87-9825-23: RNCC: 3 | RNVC: 2
3510507942: RNCC: 3 | RNVC: 2
351-050-7942: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-320-8068
Auto- Raccord Corps

143208068
A60-72846: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-407-0239
Quick Disconnect Coupling Half

144070239
RBE08-1808/IC: RNCC: 3 | RNVC: 2

29 Jan 1986

4730-14-382-6636
Tube Tee

143826636
365A53-1334-20: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-288-6277
Pipe Flange

142886277
6784-2CA10: RNCC: 2 | RNVC: 2

1 Jan 1972

4730-14-390-7275
Tube To Boss Straight Adapter

143907275
F8X-S-25-M27X2: RNCC: 3 | RNVC: 2

19 Apr 2000

4730-14-432-5440
Quick Disconnect Coupling Half

144325440
GMIANP011-01: RNCC: 3 | RNVC: 2

14 Jun 1989

4730-14-238-9385
Tube To Boss Straight Adapter

142389385
00375-67: RNCC: 3 | RNVC: 2
L23375-92: RNCC: 5 | RNVC: 2
J00375-67: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-564-3647
Flange To Boss Straight Adapter

145643647
BDR5226A10: RNCC: 3 | RNVC: 2
BDR5226A10: RNCC: 5 | RNVC: 2

26 Apr 2010

4730-14-249-8334
Fluid Passage Bolt

142498334
0000072568: RNCC: 3 | RNVC: 2
0000072568: RNCC: 5 | RNVC: 9
72568: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-508-0128
Tube Tee

145080128
130CU14: RNCC: 3 | RNVC: 9
1911060138: RNCC: 5 | RNVC: 9

26 Aug 1998

4730-14-522-8341
Tube Coupling Assembly

145228341
12 30 33 200: RNCC: 3 | RNVC: 2
240 267: RNCC: 3 | RNVC: 2

29 Nov 2000

4730-14-529-4223
Tube To Boss Straight Adapter

145294223
6501CCH419: RNCC: 3 | RNVC: 2

29 Mar 2002

4730-14-392-9377
Tube Tee

143929377
0024254247: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-559-8776
Tube Cap

145598776
BUZ22LA3CX: RNCC: 3 | RNVC: 2

27 Feb 2009

4730-14-294-6852
Tube To Boss Straight Adapter

142946852
R18774REP1DN65: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-554-2222
Hydraulic Swivel Joint

145542222
358 014: RNCC: 3 | RNVC: 2
358 014: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-14-295-9598

4730-14-293-0583

4730-14-374-3013

4730-14-255-4950
Raccord

142554950
321A75-2042-20: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-431-1531
Prolongateur Specia

144311531
MEC11371: RNCC: 3 | RNVC: 2
6784-1CM8A: RNCC: 3 | RNVC: 9

10 Apr 1989

4730-14-438-3859
Tube Coupling

144383859
4730HL-3DE26,9: RNCC: 2 | RNVC: 2
Y07134-01-0000P003DE26,9: RNCC: 3 | RNVC: 2
RAR1446: RNCC: 5 | RNVC: 2

19 Mar 1990

4730-14-354-0687
Bulkhead Hose Connector

143540687
4219-8: RNCC: 3 | RNVC: 2

16 Jan 1979

4730-14-479-1823
Tube Fitting Socket Welded Ferrule

144791823
FI 4.61.85.02: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-573-4249
Branched Tubing Connector

145734249
P1-0265-A: RNCC: 3 | RNVC: 2

11 Oct 2012

4730-14-396-3233
Raccord Compose

143963233
4.7522.01: RNCC: 3 | RNVC: 9
4-7522-01: RNCC: 5 | RNVC: 9
4752201: RNCC: 5 | RNVC: 9

27 Nov 1984

4730-14-287-5145
Tube Union

142875145
EN10242-U12-1-ZN-A: RNCC: 2 | RNVC: 2
770341206: RNCC: 3 | RNVC: 2
341-1Z: RNCC: 5 | RNVC: 2
770 341 206: RNCC: 5 | RNVC: 2
E29801U6FZ: RNCC: 5 | RNVC: 9
264-1Z: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-397-6998
Embout Filete A Sou

143976998
GSM164-023F9: RNCC: 3 | RNVC: 2
MAT164-0355F9: RNCC: 3 | RNVC: 2
4730ACF3PN250DE13,72: RNCC: 3 | RNVC: 9

14 Dec 1984

4730-14-346-7042
Pipe Flange

143467042
6784-1DD114-3: RNCC: 2 | RNVC: 2
MEC11412: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-440-7004
Raccord Special

144407004
2-64-01-03-201-01: RNCC: 3 | RNVC: 2
85-694-3475: RNCC: 6 | RNVC: 9

18 Jul 1990

4730-14-323-4980

4730-14-357-4018

4730-14-565-3711
Tube Tee

145653711
T30SCFX: RNCC: 3 | RNVC: 2
A231004000229: RNCC: 5 | RNVC: 2

11 Aug 2010

4730-14-556-9632
Tube Elbow

145569632
8092 1635: RNCC: 3 | RNVC: 2

24 Apr 2008

4730-14-254-9159
Tube Tee

142549159
40391: RNCC: 3 | RNVC: 2
VDP3073: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-391-3000
Pipe Clamp Coupling

143913000
4893: RNCC: 3 | RNVC: 9

1 Mar 1984

4730-14-461-4530
Tube Coupling

144614530
RA999A030: RNCC: 3 | RNVC: 9
1003896Q00: RNCC: 5 | RNVC: 2

10 Mar 1993

4730-14-359-5888
Tube Coupling

143595888
224831: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-354-6965
Quick Disconnect Coupling Half

143546965
1121410900: RNCC: 3 | RNVC: 2
DAH1121410900: RNCC: 5 | RNVC: 9

20 Feb 1979

4730-14-284-5576
Tube To Boss Straight Adapter

142845576
86043: RNCC: 3 | RNVC: 2
9567157840: RNCC: 5 | RNVC: 2
86043: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-404-4031
Tube Tee

144044031
T0434FF: RNCC: 3 | RNVC: 2

30 Oct 1985

4730-14-396-5174
Tube To Boss Straight Adapter

143965174
183364: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-449-5485
Tube Union

144495485
RACCORD SOUD PAR BB L33,7: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-367-5126
Tube Union

143675126
NO PRIMARY REF14-367-5126: RNCC: 3 | RNVC: 2
4-581034-1: RNCC: 5 | RNVC: 9

19 Jan 1981

4730-14-365-2424
Tube To Boss Straight Adapter

143652424
403-711-030-0: RNCC: 3 | RNVC: 2
977915: RNCC: 5 | RNVC: 2
977915: RNCC: 5 | RNVC: 2
977915: RNCC: 5 | RNVC: 9

19 Sep 1980

4730-14-216-1701
Bouchon Special

142161701
610-100-003-0: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-238-1613
Sediment Strainer Element

142381613
70013709: RNCC: 3 | RNVC: 2
70013709: RNCC: 5 | RNVC: 2
9875-2: RNCC: 5 | RNVC: 2
189176: RNCC: 5 | RNVC: 2
189176: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-519-3175
Grooved Clamp Connecting Coupling Half

145193175
215890-0: RNCC: 3 | RNVC: 2

15 Mar 2000

4730-14-432-2556
Tube Repair Plug

144322556
NCHX01H013EF7-48X3TAMPON: RNCC: 3 | RNVC: 2
NCHX01H013DF7-48X3TAMPON: RNCC: 5 | RNVC: 2

31 May 1989

4730-14-391-6495
Quick Disconnect Coupling Half

143916495
RBE08-1103: RNCC: 3 | RNVC: 2
RBE8-1103: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-298-1764
Tube To Boss Straight Adapter

142981764
NO PRIMARY REF14-298-1764: RNCC: 3 | RNVC: 2
87529: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-426-8824
Sediment Strainer Element

144268824
2935-0036: RNCC: 3 | RNVC: 2
SAF2935-0036: RNCC: 5 | RNVC: 2

27 Sep 1988

4730-14-364-8769
Quick Disconnect Coupling Half

143648769
SBA12-1104: RNCC: 3 | RNVC: 2

2 Sep 1980

4730-14-263-1982
Raccord Droit

142631982
NO PRIMARY REF14-263-1982: RNCC: 3 | RNVC: 2
417350: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-413-6235
Tube Fitting Brazing Ferrule

144136235
0153805: RNCC: 3 | RNVC: 2
15-41-3805: RNCC: 3 | RNVC: 9

6 Jan 1987

4730-14-236-8654
Tube To Boss Straight Adapter

142368654
321A75-0814-20: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-204-3662
Tube To Boss Straight Adapter

142043662
0202000080: RNCC: 3 | RNVC: 2
202-00-008: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-423-4468
Pipe Flange

144234468
UA50088006PN50-11B2SDN32: RNCC: 2 | RNVC: 2
4730HCPN50DN03211B2S: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-430-3830
Tube Fitting Flared Sleeve

144303830
0177-01-04-06: RNCC: 3 | RNVC: 2

15 Mar 1989

4730-14-312-2370
Tube Coupling

143122370
A2-70966: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-364-8731
Pipe Flange

143648731
4730CA-168,3: RNCC: 2 | RNVC: 2
MEC10377: RNCC: 3 | RNVC: 2
4730CA168-3: RNCC: 3 | RNVC: 9

2 Sep 1980

4730-14-560-5176
Tube Coupling

145605176
GC6048-0606: RNCC: 3 | RNVC: 2
GC 6048-0606: RNCC: 5 | RNVC: 9

28 Apr 2009

4730-14-276-8013
Tube To Boss Straight Adapter

142768013
631X4109: RNCC: 3 | RNVC: 2
U1-8D631X4109: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-556-7872
Hose Clamp

145567872
5033.7PP: RNCC: 3 | RNVC: 2

11 Apr 2008

4730-14-235-1122

4730-14-279-5377
Tube To Boss Straight Adapter

142795377
3B80-6: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-414-6596
Tube Coupling

144146596
4730HK-RSP26,9X2,9: RNCC: 2 | RNVC: 2

20 Feb 1987

4730-14-403-8954
Quick Disconnect Wye

144038954
F.R.F.80-SYM 40 ALU: RNCC: 3 | RNVC: 2

11 Sep 1985

4730-14-514-9906
Tube To Boss Swivel Joint

145149906
M 609 K15 AGJ 20: RNCC: 3 | RNVC: 2
M609K15AGJ20: RNCC: 5 | RNVC: 2

25 Jun 1999

4730-14-397-7615
Raccord Verin Direc

143977615
7M350: RNCC: 3 | RNVC: 2
0U50329M1-09: RNCC: 5 | RNVC: 2

7 Jan 1985

4730-14-442-9305
Quick Disconnect Plug

144429305
NO PRIMARY REF14-442-9305: RNCC: 3 | RNVC: 2
4-581524-1: RNCC: 5 | RNVC: 9

7 Nov 1990

4730-14-426-7975
Tube Tee

144267975
4730HEING219,1X12,5-168,3X11: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-356-7025
Fluid Passage Bolt

143567025
28-12-16-2: RNCC: 3 | RNVC: 2
28-12-16-2: RNCC: 5 | RNVC: 2

15 May 1979

4730-14-367-0061
Raccord Tube Embase

143670061
R4A715-43-02: RNCC: 3 | RNVC: 2

11 Dec 1980

4730-14-576-4043
Hose To Boss Straight Adapter

145764043
GA47616-108: RNCC: 3 | RNVC: 2

17 Jun 2013

4730-14-273-5361
Pipe Flange

142735361
7062TD1F1M108-5UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-367-7262

4730-14-256-7596

4730-14-533-3523
Bride

145333523
DLT016034: RNCC: 3 | RNVC: 2

31 Jan 2003

4730-14-556-7417
Hose Bushing

145567417
8245 376: RNCC: 3 | RNVC: 2

8 Apr 2008

4730-14-367-7248

4730-14-512-8125
Tube Union

145128125
197545: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-230-6058

4730-14-291-0112

4730-14-244-0513

4730-14-271-3385
Raccord

142713385
5380558: RNCC: 3 | RNVC: 2
5380558: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-371-5597
Tube To Boss Straight Adapter

143715597
366A75-3084-23: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-237-7623
Quick-Disconnect Nipple

142377623
5005-1B: RNCC: 3 | RNVC: 2
5005B: RNCC: 5 | RNVC: 2
5005B: RNCC: 5 | RNVC: 2
831-63-011: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-379-1724
Quick Disconnect Coupling Half

143791724
NO PRIMARY REF14-379-1724: RNCC: 3 | RNVC: 2
19-18080SANSFILETAGE: RNCC: 5 | RNVC: 9

6 Sep 1982

4730-14-391-6629
Quick Disconnect Coupling Half

143916629
RBE08-7153: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-414-5061
Tube To Boss Straight Adapter

144145061
LL130-CK20S: RNCC: 3 | RNVC: 2
8176200066: RNCC: 5 | RNVC: 2
RAR1384: RNCC: 5 | RNVC: 2

5 Feb 1987

4730-14-217-3567

4730-14-206-6871
Fluid Passage Bolt

142066871
0000290090: RNCC: 3 | RNVC: 2
000-29-009: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-394-0806
About De Raccordeme

143940806
N011-111-81: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-578-2815
Tube Tee

145782815
NSA8426-6D: RNCC: 1 | RNVC: 2
NSA8426-6D: RNCC: 3 | RNVC: 2
NSA8426-6D: RNCC: 5 | RNVC: 2

18 Nov 2013

4730-14-230-5825
Raccord Special

142305825
M3E781-24: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-218-3050
Tube To Boss Straight Adapter

142183050
12-10-12-17C0TF: RNCC: 3 | RNVC: 2
91300602: RNCC: 3 | RNVC: 2
91300602: RNCC: 5 | RNVC: 2
91300602: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-550-1009
Hydraulic System Accessories Manifold

145501009
GS47039-100: RNCC: 3 | RNVC: 2

1 Jun 2006

4730-14-333-5333
Pipeline Flexible Spacer

143335333
R00-25675: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-341-1196
Tube Tee

143411196
NO PRIMARY REF14-341-1196: RNCC: 3 | RNVC: 2
EVL25SM: RNCC: 5 | RNVC: 9
2409: RNCC: 5 | RNVC: 9

16 Mar 1977

4730-14-032-3101
Quick Disconnect Coupling Assembly

140323101
23MEPK324500005PL1TYPEB-REP5: RNCC: 3 | RNVC: 2
CMT30E9047PL1TYPEB-REP5-UE12: RNCC: 5 | RNVC: 2
CMT30E9047TYPEBREP5BR0NZE: RNCC: 5 | RNVC: 2

20 Jul 1982

4730-14-499-2102
Tube To Boss Straight Adapter

144992102
25232122-120: RNCC: 3 | RNVC: 2
103043001049A: RNCC: 3 | RNVC: 9
F300 0T 019 7788: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-377-5033
Sediment Strainer Element

143775033
2-186-100: RNCC: 3 | RNVC: 2

17 May 1982

4730-14-265-9497
Threaded Tube Fitting Plug

142659497
631X2103: RNCC: 3 | RNVC: 2
P2-8-631X2103: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-221-9637
Raccord Vabco

142219637
UMB10-1-4NPTUA10: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-372-3878
Tube To Boss Straight Adapter

143723878
P4-12-8-12X100: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-333-5223
Barillet A 5 Voies

143335223
GSM163-021F10: RNCC: 3 | RNVC: 2
GSM163-21F10: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-563-6580
Tube Elbow

145636580
A05051480: RNCC: 3 | RNVC: 2

3 Mar 2010

4730-14-365-9851

4730-14-342-2186

4730-14-250-7269

4730-14-220-6568
Tube Tee

142206568
Q1-5TR10X14X10SD: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-512-6386
Tube Union

145126386
NO PRIMARY REF14-512-6386: RNCC: 3 | RNVC: 2
NNP 4730864531872: RNCC: 5 | RNVC: 9

17 Feb 1999

4730-14-223-8646
Raccord A Joint Cou

142238646
GSM1297FD5-1TABLEAU1D1-20: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-557-0820
Flange To Hose Straight Adapter

145570820
D2018-047-F9: RNCC: 3 | RNVC: 2

6 May 2008

4730-14-327-4693
Crepine Assechement

143274693
GSM145-015F4ET17: RNCC: 3 | RNVC: 2
401MA0225F5ACIER: RNCC: 5 | RNVC: 2
401MA225F5ACIER: RNCC: 5 | RNVC: 2
GSM145-03F46: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-347-8210

4730-14-497-9982
Tube To Boss Straight Adapter

144979982
A0191: RNCC: 3 | RNVC: 2
A0191: RNCC: 5 | RNVC: 2
F300 0T 001 5158: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-368-4220
Bulkhead Hose Connector

143684220
262-50-75622-83: RNCC: 3 | RNVC: 2

20 Feb 1981

4730-14-361-3866
Fluid Pressure Line Multiple Connector

143613866
84524: RNCC: 3 | RNVC: 2

24 Jan 1980

4730-14-518-3456
Tube To Boss Straight Adapter

145183456
HUNXX000094: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-367-0182

4730-14-564-5746
Tube Tee

145645746
T35LCFX: RNCC: 3 | RNVC: 2
A231004000296: RNCC: 5 | RNVC: 2

7 May 2010

4730-14-210-9781
Croix De Reduction

142109781
1CXR14X10X10X10: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-538-3463
Lubricating Oil Cup

145383463
NGM0010036153171: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-434-0051
Bulkhead Hose Connector

144340051
544360: RNCC: 3 | RNVC: 2

29 Aug 1989

4730-14-523-7158
Tube To Boss Straight Adapter

145237158
S937266: RNCC: 3 | RNVC: 2

31 Jan 2001

4730-14-425-3414
Bulkhead Hose Connector

144253414
160H712204-170: RNCC: 3 | RNVC: 2

30 Jun 1988

Load More Results