What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 167 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 167 of 185

4730-14-281-4643

4730-14-349-2186

4730-14-577-1241
Pipe Tee

145771241
ASNA3757C161612: RNCC: 1 | RNVC: 2
ASNA3757C161612: RNCC: 3 | RNVC: 2

12 Aug 2013

4730-14-299-9528

4730-14-463-3327
Raccord

144633327
5000674532: RNCC: 3 | RNVC: 2

9 Jun 1993

4730-14-440-3039
Lubrication Fitting

144403039
159700-15: RNCC: 3 | RNVC: 9
89410695: RNCC: 5 | RNVC: 2
159700-15: RNCC: 5 | RNVC: 9

11 Jul 1990

4730-14-031-6477
Tube Coupling Inverted Nut

140316477
Q1-5T10LEQUIPE: RNCC: 3 | RNVC: 2
292688: RNCC: 5 | RNVC: 2

14 Jun 1980

4730-14-251-9014
Tube To Boss Straight Adapter

142519014
34-1113: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-451-6762
Quick Disconnect Coupling Half

144516762
RBE11-6816/IC: RNCC: 3 | RNVC: 2
RBE11-6816IC: RNCC: 5 | RNVC: 2

28 Nov 1991

4730-14-482-3618
Kit Adptation

144823618
213201: RNCC: 3 | RNVC: 2
NO PRIMARY REF14-482-3618: RNCC: 3 | RNVC: 2
213201: RNCC: 5 | RNVC: 9
213201: RNCC: 5 | RNVC: 9

9 Jul 1996

4730-14-444-8826
Quick Disconnect Coupling Half

144448826
PSO06-6810: RNCC: 3 | RNVC: 2

28 Jan 1991

4730-14-446-3354
Bulkhead Hose Connector

144463354
3136 08 13: RNCC: 3 | RNVC: 2
31360813: RNCC: 5 | RNVC: 2
227-5802: RNCC: 5 | RNVC: 2

14 Mar 1991

4730-14-423-4765
Pipe Flange

144234765
UA50088006PN100-11LSFDN65: RNCC: 2 | RNVC: 2
473HCPN100DN06511LSF: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-319-5599
Tube Tee

143195599
Q1-57-20NN: RNCC: 3 | RNVC: 2
TK20N: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-544-8755
Flange To Boss Straight Adapter

145448755
OU0760NC-024: RNCC: 3 | RNVC: 2
OU0760NC-024: RNCC: 5 | RNVC: 2

1 Mar 2005

4730-14-369-0422
Tube To Boss Straight Adapter

143690422
15-8571: RNCC: 3 | RNVC: 2
8571-15: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-229-2714
Raccord A Joint Cou

142292714
GSM1297FE6-8TABLEAU1MN7062BB1: RNCC: 3 | RNVC: 2
GSM1297FE6-8TABLEAU1: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-398-5942
Tube Fitting Brazing Ferrule

143985942
4730AMF3PN250DE41-5: RNCC: 2 | RNVC: 2
GSM164-057F6Z0NEC: RNCC: 3 | RNVC: 2
MAT164-0354F6ZONEC: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-209-3204
Fluid Passage Bolt

142093204
057-50-031: RNCC: 3 | RNVC: 2
0057500310: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-553-1794
Lubrication Fitting Adapter

145531794
A03037-10-7000: RNCC: 3 | RNVC: 2

12 Mar 2007

4730-14-520-9099
Quick Disconnect Coupling Half

145209099
RBE06-6161: RNCC: 3 | RNVC: 2

21 Jun 2000

4730-14-488-1676
Quick Disconnect Coupling Half

144881676
RBE03-7150/IA/JV/W/: RNCC: 3 | RNVC: 2
RBE037150-IA-JV-W: RNCC: 5 | RNVC: 2

18 Apr 1997

4730-14-386-5968
Bulkhead Hose Connector

143865968
979447: RNCC: 3 | RNVC: 2
979447: RNCC: 5 | RNVC: 2
979447: RNCC: 5 | RNVC: 9

24 Aug 1983

4730-14-324-1142
Pipe Flange

143241142
BRIDEERVIN0XDN100: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-444-7441
Tube To Hose Straight Adapter

144447441
123621306: RNCC: 3 | RNVC: 9

21 Jan 1991

4730-14-447-4036
Fluid Pressure Line Multiple Connector

144474036
440251: RNCC: 3 | RNVC: 2
44000251: RNCC: 5 | RNVC: 2

15 May 1991

4730-14-561-8015
Tube Union

145618015
GE22LMEDOMDCF: RNCC: 3 | RNVC: 2
GE22LMEDOMDCF: RNCC: 5 | RNVC: 9

8 Sep 2009

4730-14-383-0628
Tube To Boss Straight Adapter

143830628
16926: RNCC: 3 | RNVC: 2

7 Mar 1996

4730-14-382-8816
Tube To Boss Straight Adapter

143828816
PE60829H12: RNCC: 3 | RNVC: 2

19 Apr 2000

4730-14-323-9031
Tube To Boss Straight Adapter

143239031
UFB10-1-2BSP: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-452-8183
Tube Coupling

144528183
3PI15MGC TYPE S: RNCC: 3 | RNVC: 2
3PI15MGC-TYPE-S-79638: RNCC: 5 | RNVC: 2

22 Jan 1992

4730-14-370-4657
Quick Disconnect Coupling Half

143704657
CMT30E9047PL1TYPEA-REP4ALLIAGALU: RNCC: 3 | RNVC: 2
CMT30L9047-4AALLIAGEALU: RNCC: 5 | RNVC: 2

18 May 1981

4730-14-432-4727
Pipe Flange

144324727
BN329-506D2DN300: RNCC: 3 | RNVC: 2

14 Jun 1989

4730-14-551-0855
Tube Tee

145510855
GS47082-100: RNCC: 3 | RNVC: 2

27 Aug 2006

4730-14-376-5373
Tube To Boss Straight Adapter

143765373
NO PRIMARY REF14-376-5373: RNCC: 3 | RNVC: 2
454188268: RNCC: 5 | RNVC: 9
404188268: RNCC: 5 | RNVC: 9
454188268: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-436-2525
Fluid Pressure Line Multiple Connector

144362525
PZC-F269: RNCC: 3 | RNVC: 2

11 Dec 1989

4730-14-575-9504
Fluid-Emulsion Spray Nozzle

145759504
C1/661: RNCC: 3 | RNVC: 2

17 May 2013

4730-14-382-0673
Tube To Boss Straight Adapter

143820673
16144: RNCC: 3 | RNVC: 2
85-691-9995: RNCC: 6 | RNVC: 9

25 Jan 1983

4730-14-573-0182
Tube Tee

145730182
ASNA3752-060604: RNCC: 1 | RNVC: 2
PE20103-060604: RNCC: 3 | RNVC: 2
ASNA3752-060604: RNCC: 5 | RNVC: 2

4 Sep 2012

4730-14-207-0107
Filtre De Refouleme

142070107
NO PRIMARY REF14-207-0107: RNCC: 3 | RNVC: 2
28730: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-462-1342
Manchette Inox

144621342
LN326-059-06-11DN15: RNCC: 3 | RNVC: 2
RAB0844: RNCC: 5 | RNVC: 2

6 Apr 1993

4730-14-573-0987
Hose Tee

145730987
332A22-1173-01: RNCC: 3 | RNVC: 2
332A22117301: RNCC: 5 | RNVC: 2

13 Sep 2012

4730-14-325-3724
Tube To Boss Straight Adapter

143253724
102026-03100: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-275-9751
Corps De Raccord

142759751
NO PRIMARY REF14-275-9751: RNCC: 3 | RNVC: 2
91H537: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-269-0965
Tube Fitting Clinch Sleeve

142690965
Q1-605-6: RNCC: 3 | RNVC: 2
DK6N: RNCC: 3 | RNVC: 2
1CA6: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-573-2153
Quick Disconnect Plug

145732153
4544: RNCC: 3 | RNVC: 2

24 Sep 2012

4730-14-576-3634
Tube To Boss Straight Adapter

145763634
10620352: RNCC: 3 | RNVC: 1

13 Jun 2013

4730-14-561-6027
Return Tube Bend

145616027
16C4OMLOS: RNCC: 3 | RNVC: 2
20 236 911 2710: RNCC: 5 | RNVC: 2

3 Aug 2009

4730-14-500-4696
Hydraulic Swivel Joint

145004696
WH12-LM0MDA3C: RNCC: 3 | RNVC: 2
WH12LM0MDA3C: RNCC: 5 | RNVC: 2
F300 0T 024 4865: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-395-5264
Pipe Flange

143955264
5-1881B43152-1089: RNCC: 3 | RNVC: 2

30 Oct 1984

4730-14-393-1737
Tube To Boss Straight Adapter

143931737
NO PRIMARY REF14-393-1737: RNCC: 3 | RNVC: 2
9-329-2757-204: RNCC: 5 | RNVC: 9

12 Apr 1984

4730-14-467-8552
Fluid Pressure Line Multiple Connector

144678552
1400-902-01: RNCC: 3 | RNVC: 2
714638: RNCC: 5 | RNVC: 2
89296283: RNCC: 5 | RNVC: 2

27 Jan 1994

4730-14-339-1074
Tube To Boss Straight Adapter

143391074
6633-2110C: RNCC: 3 | RNVC: 9

17 Dec 1976

4730-14-578-4638
Hose Nipple

145784638
FG 3/8 - FG 3/8: RNCC: 3 | RNVC: 2
A05929302: RNCC: 5 | RNVC: 2
Y00015372: RNCC: 5 | RNVC: 2

3 Dec 2013

4730-14-295-2744
Bulkhead Hose Connector

142952744
RBE6-2101-90DJVIC: RNCC: 3 | RNVC: 2
VDP3377: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-419-7227
Tube To Hose Straight Adapter

144197227
082842-00000: RNCC: 3 | RNVC: 2
A768221: RNCC: 5 | RNVC: 2
91713741: RNCC: 5 | RNVC: 2

5 Nov 1987

4730-14-300-7480
Tube Tee

143007480
GSM523-026F68: RNCC: 3 | RNVC: 2
411MA295F12: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-333-0425
Fluid Pressure Line Multiple Connector

143330425
606-10N90ARSK: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-297-1352
Fluid Pressure Line Multiple Connector

142971352
MY20515-008: RNCC: 3 | RNVC: 2
MY20-515-008: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-370-5063
Tube To Boss Straight Adapter

143705063
S911-139-74: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-368-4163
Bulkhead Hose Connector

143684163
262-10-88017-10: RNCC: 3 | RNVC: 2

20 Feb 1981

4730-14-254-2770
Tube To Boss Straight Adapter

142542770
6407: RNCC: 3 | RNVC: 2
00375-13: RNCC: 5 | RNVC: 2
A00375-13: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-342-8893
Tube Tee

143428893
G1809-27-21X27CYL: RNCC: 3 | RNVC: 2

16 May 1977

4730-14-497-0273
Fluid Pressure Line Multiple Connector

144970273
50-4891K: RNCC: 3 | RNVC: 2
F300 0T 022 5741: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-228-0072

4730-14-382-7007
Fluid Flow Restrictor

143827007
2700F02: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-338-3990
Sediment Strainer Element

143383990
CH1142503461W00: RNCC: 3 | RNVC: 2
G6890: RNCC: 5 | RNVC: 2
CH1142503501W00: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-274-2981
Tube To Boss Straight Adapter

142742981
101688: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-513-7216
Fluid Pressure Line Multiple Connector

145137216
46802240: RNCC: 3 | RNVC: 2
89304198: RNCC: 5 | RNVC: 2

7 Apr 1999

4730-14-514-6505
Tube Coupling

145146505
10000D30474: RNCC: 3 | RNVC: 2

4 Jun 1999

4730-14-344-5748
Tube Tee

143445748
1TR12X12X8NU: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-533-1725
Tube Coupling

145331725
5000295228: RNCC: 3 | RNVC: 2

28 Jan 2003

4730-14-482-1484
Pressure Plug Retention Cap

144821484
84239: RNCC: 3 | RNVC: 2

20 Jun 1996

4730-14-503-1681
Bulkhead Hose Connector

145031681
RA1M523303180: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-288-9241
Tube To Boss Straight Adapter

142889241
C5847: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-290-0725
Pipe Flange

142900725
46060B: RNCC: 3 | RNVC: 2
46060: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-486-3396
Tube To Boss Straight Adapter

144863396
014375-82P: RNCC: 3 | RNVC: 2

12 Mar 1997

4730-14-434-7455
Tube Tee

144347455
553660: RNCC: 3 | RNVC: 2

3 Oct 1989

4730-14-335-7354

4730-14-211-0440
Tube Fitting Clinch Sleeve

142110440
DA4N: RNCC: 3 | RNVC: 2
BE4: RNCC: 3 | RNVC: 2
1A4: RNCC: 3 | RNVC: 2
205-4: RNCC: 3 | RNVC: 2
205-4: RNCC: 5 | RNVC: 2
5330-65-0000068: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-393-3097
Tube Tee

143933097
4730GD088,9: RNCC: 2 | RNVC: 2
BN324-554F4-88,9: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-461-3340
Tube Coupling Assembly

144613340
A.GV-12S-NPT-1/2: RNCC: 3 | RNVC: 2

8 Mar 1993

4730-14-440-1225
Bride A Zinc

144401225
MAT162-0117F16: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-263-6378
Tube To Boss Straight Adapter

142636378
7062BC1RCET2-36A52-3: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-441-5632
Tube Union

144415632
METALGRIP 33.7 EPDM 16 BAR: RNCC: 3 | RNVC: 2
LN320035-F9-REP2: RNCC: 5 | RNVC: 2
1800330: RNCC: 5 | RNVC: 2

3 Sep 1990

4730-14-382-6509
Tube To Boss Straight Adapter

143826509
501-500-053-8: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-566-2262
Lubrication Fitting

145662262
07025010: RNCC: 3 | RNVC: 2
07025010: RNCC: 3 | RNVC: 2
9-20-04-22: RNCC: 5 | RNVC: 2
9200422: RNCC: 5 | RNVC: 2
GG32-08X125: RNCC: 5 | RNVC: 2
GG351-8-125: RNCC: 5 | RNVC: 2
7025010: RNCC: 5 | RNVC: 2
9.20.04.22: RNCC: 5 | RNVC: 2
GG351-08-125: RNCC: 5 | RNVC: 2
7025010: RNCC: 5 | RNVC: 2

28 Oct 2010

4730-14-242-8101
Tube Union

142428101
NO PRIMARY REF14-242-8101: RNCC: 3 | RNVC: 2
495-1 1-4: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-405-1477
Raccord

144051477
29-9-000376-0: RNCC: 3 | RNVC: 2
DLT586660: RNCC: 3 | RNVC: 2
RAR1376: RNCC: 5 | RNVC: 2
DLT32126: RNCC: 5 | RNVC: 9
DLT032126: RNCC: 5 | RNVC: 9

20 Nov 1985

4730-14-562-6029
Pipeline Flexible Spacer

145626029
R1/40/KR 320-WG/E: RNCC: 3 | RNVC: 2

6 Nov 2009

4730-14-267-5298
Raccord Intermediai

142675298
6898-0052: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-260-9392
Pipe Flange

142609392
7062DF1F1F25-2-5XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-427-8938
Tube To Boss Straight Adapter

144278938
GE38SR71X: RNCC: 3 | RNVC: 2
GE38SR71X: RNCC: 3 | RNVC: 9
XGE38-PSR/1.4571: RNCC: 5 | RNVC: 9

19 Nov 1988

4730-14-242-9759

4730-14-326-6495

4730-14-267-7184

4730-14-278-3205
Purge Permanente

142783205
RUH4A7A: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-577-8884
Grooved Clamp Connecting Coupling Half

145778884
GF 246 G 33/15: RNCC: 3 | RNVC: 2
4730MT0200102: RNCC: 6 | RNVC: 9

17 Oct 2013

4730-14-501-9735
Tube Coupling Assembly

145019735
H6-DI13,8-316L: RNCC: 3 | RNVC: 2

19 Nov 1997

4730-14-247-5442
Tube To Boss Straight Adapter

142475442
M20-8B: RNCC: 3 | RNVC: 2
12-20 1-2BGS: RNCC: 3 | RNVC: 2
UMA20X1-2BGSN: RNCC: 3 | RNVC: 2
4A20 1-2BGS: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-353-3729
Tube To Boss Straight Adapter

143533729
1-1087ZE00-02: RNCC: 3 | RNVC: 9
85-689-7316: RNCC: 6 | RNVC: 9

8 Dec 1978

4730-14-286-4479
Tube To Boss Straight Adapter

142864479
613-410-015-0: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-461-3334
Tube Coupling Assembly

144613334
A.GEV-20S-R11: RNCC: 3 | RNVC: 2

8 Mar 1993

4730-14-258-2173

4730-14-566-9411
Quick Disconnect Coupling Half

145669411
HA 05052 EO: RNCC: 3 | RNVC: 2
A231004000466: RNCC: 5 | RNVC: 2

18 Jan 2011

4730-14-278-8030

4730-14-561-6610
Flexible Tube Coupling Assembly

145616610
4G6FBSPORX90: RNCC: 3 | RNVC: 2
GAH4G6FBSPORX90: RNCC: 5 | RNVC: 2

18 Aug 2009

4730-14-535-3774
Tube Union

145353774
5005030608: RNCC: 3 | RNVC: 2

22 May 2003

4730-14-498-7031
Union

144987031
103110806: RNCC: 3 | RNVC: 2
3RA8L-6LNU: RNCC: 3 | RNVC: 2
5005030298: RNCC: 3 | RNVC: 2
F300 0T 008 0420: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-210-3599
Raccord Special

142103599
B21-60-48V90: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-370-8106
Tube To Boss Straight Adapter

143708106
1204-30-33X200: RNCC: 3 | RNVC: 2
0RSA30X33-200N: RNCC: 3 | RNVC: 2
5A30-33X200: RNCC: 3 | RNVC: 2
121097: RNCC: 5 | RNVC: 2

5 Jun 1981

4730-14-347-1721
Buse De Raccord

143471721
EA1M211-53-831: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-554-7224
Self-Sealing Coupling Assembly

145547224
RU4401: RNCC: 3 | RNVC: 2
AV4000-37: RNCC: 5 | RNVC: 2

7 Aug 2007

4730-14-398-9897
Threaded Tube Fitting Plug

143989897
N00321876: RNCC: 3 | RNVC: 2
R13091300: RNCC: 5 | RNVC: 2
S910-150-73: RNCC: 5 | RNVC: 2

6 Mar 1985

4730-14-389-8930
Tube Tee

143898930
EDE53260-01-15: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-546-5108
Tube Coupling

145465108
3DL15CL: RNCC: 3 | RNVC: 2
5010604667: RNCC: 5 | RNVC: 2

12 Jul 2005

4730-14-300-7716
Diaphragme

143007716
NO PRIMARY REF14-300-7716: RNCC: 3 | RNVC: 2
30F3002REP4: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-552-1130
Tube To Boss Swivel Joint

145521130
0000301850: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-524-8720
Ecrou D'accumulateu

145248720
21302-000-00: RNCC: 3 | RNVC: 2

25 Apr 2001

4730-14-449-5524
Tube Tee

144495524
TE EGAL EMBOUT BB L26,9: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-562-5557
Pipeline Flexible Spacer

145625557
0429053: RNCC: 3 | RNVC: 2
A1/ 100/ KR320-WG/ P/AV: RNCC: 3 | RNVC: 2

3 Nov 2009

4730-14-397-7067
Tube Tee

143977067
GSM164-059F10: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-384-3883
Raccord Flexible

143843883
GSM166-005F7: RNCC: 3 | RNVC: 2

4 May 1983

4730-14-041-6427
Quick Disconnect Coupling Half

140416427
9699-12DN13: RNCC: 3 | RNVC: 2
9699-12-13: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-368-8155
Tube To Boss Straight Adapter

143688155
9105081066: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-349-1838
Sediment Strainer Element

143491838
50213: RNCC: 3 | RNVC: 2
3031348R2: RNCC: 5 | RNVC: 2

19 Apr 1978

4730-14-351-8086

4730-14-288-9026
Tube To Boss Straight Adapter

142889026
9101141766: RNCC: 3 | RNVC: 2
CA3-14-12-17CYL: RNCC: 5 | RNVC: 9
CA3-14-12X17BSPCYL: RNCC: 5 | RNVC: 9
CA3-14-12X17CYL: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-458-5973
Anchor And Reinforcement Pipe Clamp

144585973
SP212,7PA-LI: RNCC: 3 | RNVC: 2

28 Oct 1992

4730-14-293-6403
Tube To Boss Straight Adapter

142936403
120-16E: RNCC: 3 | RNVC: 2
12016E: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-481-0172
Branched Tubing Connector

144810172
MAT862-3007F5: RNCC: 3 | RNVC: 2

17 Apr 1996

4730-14-283-6838
Quick Disconnect Coupling Half

142836838
E29-573-16: RNCC: 2 | RNVC: 2
9699-12-016: RNCC: 3 | RNVC: 2
9699-12-016: RNCC: 5 | RNVC: 9
9699-12-16: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-346-7112
Pipe Flange

143467112
6784-1EA38A: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-415-2060
Tube Tee

144152060
4730HEEG114,3X5,6: RNCC: 2 | RNVC: 2
U1238F13DE114,3X5,6: RNCC: 5 | RNVC: 2

17 Apr 1987

4730-14-414-6808
Threaded Tube Fitting Plug

144146808
4730HK-BRFI10,2: RNCC: 2 | RNVC: 2
MEC10507: RNCC: 3 | RNVC: 2

24 Feb 1987

4730-14-369-4400
Quick Disconnect Coupling Half

143694400
M0F20GY3-4: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-560-5288
Tube Coupling Nut

145605288
ABS0107-150: RNCC: 1 | RNVC: 2
GC437-12: RNCC: 3 | RNVC: 2
G603-24D: RNCC: 3 | RNVC: 2
3-3616-150: RNCC: 3 | RNVC: 2
3-3616-150: RNCC: 3 | RNVC: 2
ABS0107-150: RNCC: 5 | RNVC: 2

28 Apr 2009

4730-14-437-6866
Pipe Expansion Joint

144376866
2-541816-1: RNCC: 3 | RNVC: 2
2-541816-1: RNCC: 5 | RNVC: 9

7 Feb 1990

4730-14-308-0950

4730-14-321-7600

4730-14-268-8859
Tube Tee

142688859
631X6109: RNCC: 3 | RNVC: 2
T2-6-631X6109: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-240-7117
Manchette Droite A

142407117
NG410-54-14X111: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-217-3555

4730-14-347-8145

4730-14-321-4661
Piece Raccordement

143214661
901MA0078F6: RNCC: 3 | RNVC: 2
901MA078F6: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-219-2245
Raccord Adaptateur

142192245
PR46969: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-213-8295
Manchon De Renforce

142138295
NO PRIMARY REF14-213-8295: RNCC: 3 | RNVC: 2
1500-441-40: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-220-6282
Fluid Pressure Line Multiple Connector

142206282
R13008: RNCC: 3 | RNVC: 2
99058265: RNCC: 5 | RNVC: 2
RA13008: RNCC: 5 | RNVC: 2
99058265: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-040-5171
Tube To Boss Straight Adapter

140405171
282439: RNCC: 3 | RNVC: 2
282439: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-235-0134
Sediment Strainer Element

142350134
ELPEP4E4C: RNCC: 3 | RNVC: 9

1 Jan 1967

4730-14-497-0160
Racc.Union

144970160
09038313: RNCC: 3 | RNVC: 2
F300 0T 022 5469: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-452-5596
Pipe Flange

144525596
LN320033F27DN25: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-255-4551
Raccord Droit Speci

142554551
321A84-0090-20: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-374-2429
Lubrication Fitting

143742429
9200072: RNCC: 3 | RNVC: 2
9-20-00-72: RNCC: 5 | RNVC: 9

8 Dec 1981

4730-14-324-4957
Tube To Boss Straight Adapter

143244957
A60-71589: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-361-5644
Quick Disconnect Coupling Half

143615644
RBE11-1103/IC: RNCC: 3 | RNVC: 2
RBE11-1103IC: RNCC: 5 | RNVC: 2
RBE111103IC: RNCC: 5 | RNVC: 2

24 Jan 1980

4730-14-334-2515
Tube Tee

143342515
GSM163-017F12: RNCC: 3 | RNVC: 2
GSM163-17F12: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-550-8602
Tube Coupling

145508602
23REDN/LN329/042-F9/19-3/4DN20: RNCC: 3 | RNVC: 2

25 Jul 2006

4730-14-260-9337

4730-14-577-5985
Tube Fitting Socket Welded Ferrule

145775985
405-8RRZ131: RNCC: 3 | RNVC: 2
405-8RRZ131: RNCC: 3 | RNVC: 9
RU47061: RNCC: 5 | RNVC: 1

26 Sep 2013

4730-14-558-5221
Tube Union

145585221
8001 10 17: RNCC: 3 | RNVC: 2

13 Oct 2008

4730-14-559-5027
Tube Coupling Assembly

145595027
S212A1011102: RNCC: 3 | RNVC: 2

20 Jan 2009

4730-14-578-4619
Exhaust-Intake Pneumatic Muffler

145784619
1SPL: RNCC: 3 | RNVC: 2
A05919057: RNCC: 5 | RNVC: 2
Y00015359: RNCC: 5 | RNVC: 2

2 Dec 2013

4730-14-431-1983
Swivel Retaining Pipe Flange

144311983
X553470: RNCC: 3 | RNVC: 2

11 Apr 1989

4730-14-395-3712
Tube To Gas Fitting Straight Adapter

143953712
N0189F73A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-523-6967
Tube To Boss Straight Adapter

145236967
N5037587: RNCC: 3 | RNVC: 2

31 Jan 2001

4730-14-380-9240
Sediment Strainer Element

143809240
401MA0560DN100: RNCC: 3 | RNVC: 2
401MA560DN100: RNCC: 5 | RNVC: 2

14 Dec 1982

4730-14-436-8421
Tube To Boss Straight Adapter

144368421
DA2C500051400: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-382-8744
Tube To Boss Straight Adapter

143828744
PE60835H06: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-553-1084
Tube To Boss Straight Adapter

145531084
GE06LM12EDOMDCF: RNCC: 3 | RNVC: 2
437988: RNCC: 5 | RNVC: 2
GE06LM12EDOMDCF: RNCC: 5 | RNVC: 9

2 Mar 2007

4730-14-484-2024
Hose Coupling Assembly

144842024
RA1M729007630: RNCC: 3 | RNVC: 2

31 Oct 1996

4730-14-367-7890

4730-14-250-1370

4730-14-374-8639

4730-14-296-1392
Tube To Boss Straight Adapter

142961392
341A72-5001-20: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-424-6479
Tube To Boss Straight Adapter

144246479
LW154-CP1216N: RNCC: 3 | RNVC: 2
UFA12X16-150N: RNCC: 5 | RNVC: 2
461-179: RNCC: 5 | RNVC: 2

2 Jun 1988

4730-14-501-2383
Tube To Boss Straight Adapter

145012383
471-298: RNCC: 3 | RNVC: 2
471.298: RNCC: 3 | RNVC: 2
F300 0T 025 2788: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-397-7027
Bride De Raccordeme

143977027
GSM425-007F4: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-335-4802
Tube To Boss Straight Adapter

143354802
R10606: RNCC: 3 | RNVC: 2
85-686-6279: RNCC: 6 | RNVC: 9

30 Jun 1976

4730-14-423-3939
Pipe Flange

144233939
UA50088006PN20-12C2DN150: RNCC: 2 | RNVC: 2
4730HBPN20DN15012C2: RNCC: 5 | RNVC: 2

16 Apr 1988

4730-14-320-7305
Tube To Boss Straight Adapter

143207305
A582-008: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-491-0643
Tube To Boss Straight Adapter

144910643
NO PRIMARY REF14-491-0643: RNCC: 3 | RNVC: 2
1211-174: RNCC: 5 | RNVC: 9
F300 0T 001 3448: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-495-4224
Tube To Boss Straight Adapter

144954224
L32375-82: RNCC: 3 | RNVC: 2
F300 0T 019 2394: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-422-8683
Reducing Tube Coupling Nut

144228683
ARI10-8S: RNCC: 3 | RNVC: 9

23 Mar 1988

4730-14-578-4348
Pressure Plug Retention Cap

145784348
9100-08-00: RNCC: 3 | RNVC: 2
A05929294: RNCC: 5 | RNVC: 2
Y00015371: RNCC: 5 | RNVC: 2

28 Nov 2013

4730-14-276-8872

4730-14-261-7874

4730-14-576-0038
Hose Nipple

145760038
XAGV 20 S ZN FER NOIR: RNCC: 3 | RNVC: 2
109795D: RNCC: 5 | RNVC: 2
4131.701: RNCC: 5 | RNVC: 2
Y00014162: RNCC: 5 | RNVC: 2

22 May 2013

4730-14-557-7899
Quick Disconnect Coupling Half

145577899
N00738303: RNCC: 3 | RNVC: 2
N00738303: RNCC: 5 | RNVC: 2

10 Jul 2008

4730-14-289-1107
Corps De Raccord

142891107
411MA0309REPZ1: RNCC: 3 | RNVC: 2
411MA309REPZ1: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-275-8598

4730-14-262-9630
Tubulure De Raccord

142629630
DLT006213: RNCC: 3 | RNVC: 2
DLT006213: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-365-9810

4730-14-224-3813

4730-14-275-1527

4730-14-561-9860
Pipe Flange

145619860
R987092671+R987092685: RNCC: 3 | RNVC: 2

22 Sep 2009

4730-14-416-3316
Pipe Flange

144163316
E29203-11A-PN16DN25Z2CND17-12: RNCC: 2 | RNVC: 2

3 Jun 1987

4730-14-325-6298
Bulkhead Hose Connector

143256298
121E77-200-03-0M1: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-370-3859
Tube Fitting Brazing Ferrule

143703859
BN320-513CREP8: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-455-6337
Self-Sealing Coupling Assembly Parts Kit

144556337
N010-278-89: RNCC: 3 | RNVC: 2
N01027889: RNCC: 5 | RNVC: 2

3 Jun 1992

4730-14-510-8488
Sediment Strainer Element

145108488
404C20-202: RNCC: 3 | RNVC: 2

18 Nov 1998

4730-14-501-2202
Tube To Boss Straight Adapter

145012202
424-004: RNCC: 3 | RNVC: 2
424.004: RNCC: 3 | RNVC: 2
F300 0T 025 2607: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-557-8808
Self-Sealing Coupling Assembly

145578808
GMA3-20SOMDCF: RNCC: 3 | RNVC: 2
A231004000142: RNCC: 5 | RNVC: 2

25 Jul 2008

4730-14-482-1955
Fluid Flow Restrictor

144821955
REDN-LN320-038-DN50: RNCC: 3 | RNVC: 2
23REDN-LN320-038-DN50: RNCC: 5 | RNVC: 2
LN320-038-DN50: RNCC: 5 | RNVC: 2
RAB9316: RNCC: 5 | RNVC: 2

26 Jun 1996

4730-14-505-3136
Swivel Flange To Hose Elbow

145053136
EW18-PLM-ED-0MD: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-544-2402
Fluid Flow Restrictor

145442402
RDA-20N: RNCC: 3 | RNVC: 2

12 Jan 2005

4730-14-222-6561
Tube Fitting Brazing Ferrule

142226561
GSM1297F1AF1BTABLEAU2D1-36I25: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-260-9264

4730-14-438-9961
Mamelon A Braser

144389961
DLT024672: RNCC: 3 | RNVC: 2

18 Apr 1990

4730-14-206-5522
Coude Pour Tube Equ

142065522
17-7-5962: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-572-1366
Tube Union

145721366
332A75-2985-21: RNCC: 3 | RNVC: 2
332A75298521: RNCC: 5 | RNVC: 2

11 Jun 2012

4730-14-254-9154
Sediment Strainer Element

142549154
21111-11-02: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-407-1749
Tube To Boss Straight Adapter

144071749
4AG13-22X150: RNCC: 3 | RNVC: 2
G12-13-22X150: RNCC: 3 | RNVC: 2
UMAG13X22-150N: RNCC: 3 | RNVC: 2
61634: RNCC: 5 | RNVC: 2
LW110-CS1322N: RNCC: 5 | RNVC: 2

12 Feb 1986

4730-14-351-6620
Tube To Boss Straight Adapter

143516620
MN01-12: RNCC: 3 | RNVC: 9

12 Sep 1978

4730-14-398-5903
Tube Tee

143985903
GSM164-056F16: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-328-9569
Tube Tee

143289569
Q1-5TR20X14X20NNNU: RNCC: 3 | RNVC: 2
GSM164-012F19: RNCC: 3 | RNVC: 2
TRK20X14X20NNU: RNCC: 3 | RNVC: 2
10RCA20X14X20NU: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-254-7906
Tube Tee

142547906
NO PRIMARY REF14-254-7906: RNCC: 3 | RNVC: 2
418148: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-281-6979
Fluid Flow Restrictor

142816979
761-3M715P76A: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-325-6297
Fluid Pressure Line Multiple Connector

143256297
121E77-200-02-0M2: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-561-2954
Tube Coupling Assembly

145612954
S7001-2022: RNCC: 3 | RNVC: 2
7001-2022: RNCC: 3 | RNVC: 9

2 Jul 2009

4730-14-575-3602
Hydraulic System Accessories Manifold

145753602
C73413: RNCC: 3 | RNVC: 2

29 Mar 2013

4730-14-573-6908
Hose To Boss Elbow

145736908
DB1E741200104: RNCC: 3 | RNVC: 2

5 Nov 2012

4730-14-210-7177

4730-14-342-1531

4730-14-304-9187
Tube Union

143049187
C0E429F6-25-26: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-432-9121
Tube Tee

144329121
X153216-31: RNCC: 3 | RNVC: 2

3 Jul 1989

4730-14-321-5863
Pipe Flange

143215863
7067E368GAMMM11CU-AL9NI3FE2: RNCC: 2 | RNVC: 2
7067E368GAMMM12CU-AL9NI3FE2: RNCC: 5 | RNVC: 9
7067E368C337CL2: RNCC: 5 | RNVC: 9
7067E368: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-362-4098
Tube To Boss Straight Adapter

143624098
9159168058NU: RNCC: 3 | RNVC: 2
A22-16-20-150CBNU: RNCC: 5 | RNVC: 9

19 Mar 1980

4730-14-498-6454
Union

144986454
0024325134: RNCC: 3 | RNVC: 2
0024325134: RNCC: 5 | RNVC: 9
F300 0T 007 2976: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-393-4271
Bulkhead Hose Connector

143934271
LN326-013F6ET7DN36CU-AL: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-278-9578
Quick Disconnect Coupling Half

142789578
E29-573FEMELLE26-34: RNCC: 2 | RNVC: 2
231-410-232-54REP1: RNCC: 3 | RNVC: 2
E29-573-26-34FEMELLE: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-339-9873
Bulkhead Hose Connector

143399873
GSM425-025F4: RNCC: 3 | RNVC: 2
A0009-033F4: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-325-6392
Tube Coupling

143256392
121E71-312-05-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-378-7136
Fluid Pressure Line Multiple Connector

143787136
113-16-08-16: RNCC: 3 | RNVC: 2
85-689-7107: RNCC: 6 | RNVC: 9

11 Aug 1982

4730-14-472-7943
Assortment Hose Clamp

144727943
0408-1289: RNCC: 3 | RNVC: 2
SAF0408-1289: RNCC: 5 | RNVC: 9

9 Nov 1994

4730-14-427-4824
Tube To Boss Straight Adapter

144274824
UMPA10-14X150NNU: RNCC: 3 | RNVC: 2

20 Oct 1988

4730-14-466-2299
Pipeline Flexible Spacer

144662299
DILATOFLEX-NTMH-DN32PN16: RNCC: 3 | RNVC: 2

3 Nov 1993

4730-14-398-5835
Tube Tee

143985835
GSM164-050F4: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-308-0221
Tube To Boss Straight Adapter

143080221
A2-75442: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-332-6455
Pipe Flange

143326455
4194-74-9-8A: RNCC: 3 | RNVC: 2
4194-74-9-8: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-386-4080
Tube To Boss Straight Adapter

143864080
D35-10497-0: RNCC: 3 | RNVC: 2
D35-10497-0: RNCC: 3 | RNVC: 9

24 Aug 1983

4730-14-550-1517
Quick Disconnect Coupling Half

145501517
FEM-371-8FB: RNCC: 3 | RNVC: 2
FEM-371-8FB: RNCC: 5 | RNVC: 2
FEM-371-8FB: RNCC: 5 | RNVC: 2

5 Jun 2006

4730-14-209-7545
Tube Forme Speciale

142097545
NO PRIMARY REF14-209-7545: RNCC: 3 | RNVC: 2
1997AA00-07: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-407-6979
Pipe Flange

144076979
NO PRIMARY REF14-407-6979: RNCC: 3 | RNVC: 2
0329-1302-308-26: RNCC: 5 | RNVC: 9

27 Feb 1986

4730-14-424-5533
Quick Disconnect Coupling Half

144245533
RBE06-6152: RNCC: 3 | RNVC: 2
25500092: RNCC: 3 | RNVC: 2
253-7481: RNCC: 5 | RNVC: 2
RBE06-6152: RNCC: 5 | RNVC: 2
25500092: RNCC: 5 | RNVC: 2
RBE06-6152: RNCC: 5 | RNVC: 2
6035: RNCC: 5 | RNVC: 9
6035: RNCC: 5 | RNVC: 9

27 May 1988

4730-14-499-2100
Tube To Boss Straight Adapter

144992100
25212168-202: RNCC: 3 | RNVC: 2
103043001040A: RNCC: 3 | RNVC: 9
F300 0T 019 7786: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-355-9173
Pipe Flange

143559173
FTBK39X1-5X64X84: RNCC: 3 | RNVC: 2
Q01233-40: RNCC: 5 | RNVC: 2

5 Apr 1979

4730-14-377-8795
Tube-Hose Fitting Compression Sleeve

143778795
NO PRIMARY REF14-377-8795: RNCC: 3 | RNVC: 2
19307REPW: RNCC: 5 | RNVC: 9
RE03-0019: RNCC: 5 | RNVC: 9

10 Jun 1982

4730-14-302-9914
Tube To Boss Straight Adapter

143029914
7062BB1B1966VCPT2-10UA9C337: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-500-4725
Tube To Boss Straight Adapter

145004725
XGE10SM71: RNCC: 3 | RNVC: 2
XGE10-SM71: RNCC: 3 | RNVC: 2
F300 0T 024 4894: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-222-7292
Tube Tee

142227292
GSM1297FE3-17TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-296-9559
Self-Sealing Coupling Assembly

142969559
H0200000000NW0A: RNCC: 3 | RNVC: 2
H0200000000NW2A: RNCC: 5 | RNVC: 2
1510-8E: RNCC: 5 | RNVC: 9
15108E: RNCC: 5 | RNVC: 9
C15108E: RNCC: 5 | RNVC: 9
H020000000NW0A: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-208-3522

4730-14-214-4884

4730-14-383-1868
Fluid Pressure Line Multiple Connector

143831868
MY2051510582G02: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-407-3781
Tube Coupling

144073781
12382: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-385-4076
Tube To Boss Straight Adapter

143854076
0285321240: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-561-8012
Tube Union

145618012
GE15LM16X1.5CFX: RNCC: 3 | RNVC: 2
GE15LM16X1.5CFX: RNCC: 5 | RNVC: 9

8 Sep 2009

4730-14-558-6190
Tube Elbow

145586190
WAL373486: RNCC: 3 | RNVC: 2
373486: RNCC: 5 | RNVC: 9

17 Oct 2008

4730-14-207-9742

4730-14-534-0461
Quick Disconnect Coupling Half

145340461
N 011 529 01: RNCC: 3 | RNVC: 2
HCB28 N 011 529 01: RNCC: 5 | RNVC: 2

11 Mar 2003

4730-14-562-9202
Quick Disconnect Coupling Half

145629202
4441: RNCC: 3 | RNVC: 2

4 Dec 2009

4730-14-553-7400
Quick Disconnect Coupling Half

145537400
XMB-26: RNCC: 3 | RNVC: 2

16 May 2007

4730-14-032-1687
Pipe Flange

140321687
CMT30E9053PL1TUYAU57: RNCC: 3 | RNVC: 2
CMT30E9053-57: RNCC: 5 | RNVC: 2

8 Dec 1981

4730-14-426-7711
Tube Tee

144267711
4730HEING060,3X4-26,9X2: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-443-2794
Tube To Boss Straight Adapter

144432794
0000250220: RNCC: 3 | RNVC: 2
85-694-3181: RNCC: 6 | RNVC: 9

14 Nov 1990

4730-14-537-0714
Tube-Hose Fitting Compression Sleeve

145370714
84406-08: RNCC: 1 | RNVC: 2
R5108: RNCC: 3 | RNVC: 2

24 Sep 2003

4730-14-308-5011
Tube To Boss Straight Adapter

143085011
3788750903: RNCC: 3 | RNVC: 2
78875090: RNCC: 5 | RNVC: 2
UR19-10: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-501-2159
Tube To Boss Straight Adapter

145012159
420-002: RNCC: 3 | RNVC: 2
420.002: RNCC: 3 | RNVC: 2
F300 0T 025 2564: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-460-2737
Hose To Boss Straight Adapter

144602737
MAT212-01-01: RNCC: 3 | RNVC: 2

21 Jan 1993

4730-14-558-7239
Hose Clamp

145587239
272136-112121: RNCC: 3 | RNVC: 2

29 Oct 2008

4730-14-384-3362
Bouchon Equipe

143843362
556981: RNCC: 3 | RNVC: 2
SOG556981: RNCC: 5 | RNVC: 9
85-692-2746: RNCC: 6 | RNVC: 9

4 May 1983

4730-14-556-9736
Tube Tee

145569736
NO PRIMARY REF 14-556-9736: RNCC: 3 | RNVC: 2
1580: RNCC: 5 | RNVC: 2

25 Apr 2008

4730-14-428-4693
Tube Coupling Inverted Nut

144284693
R5525: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-325-6790
Bulkhead Hose Connector

143256790
0000364630: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-274-6607
Tube-Hose Fitting Compression Sleeve

142746607
7062CE1F3B57UE10R1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-352-5942
Fluid Passage Bolt

143525942
0000280950: RNCC: 3 | RNVC: 2

16 Oct 1978

4730-14-426-1069
Fluid Pressure Line Multiple Connector

144261069
8814020231: RNCC: 3 | RNVC: 2

4 Aug 1988

4730-14-291-3972
Pipe Flange

142913972
0235227620: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-414-6602
Racco Embout Filete

144146602
4730HK-EMF17,2: RNCC: 2 | RNVC: 2

20 Feb 1987

4730-14-268-9028
Sediment Strainer Element

142689028
849438: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-400-2636
Flange To Hose Straight Adapter

144002636
0301020270: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-469-6389
Bulkhead Hose Connector

144696389
PM1A521159001: RNCC: 3 | RNVC: 2
PM1A521159001: RNCC: 5 | RNVC: 2

4 May 1994

4730-14-327-7443
Fluid Pressure Line Multiple Connector

143277443
42300800: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-407-1270
Tube To Boss Straight Adapter

144071270
DM6: RNCC: 3 | RNVC: 2

5 Feb 1986

4730-14-338-6312
Fluid Pressure Line Multiple Connector

143386312
01181017: RNCC: 3 | RNVC: 2
1181017: RNCC: 5 | RNVC: 2

17 Dec 1976

4730-14-292-4564
Self-Sealing Coupling Half

142924564
C28AA0401: RNCC: 3 | RNVC: 2
C28AA0401: RNCC: 5 | RNVC: 2
C28AA0401: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-416-5846
Pipe Flange

144165846
4730GG-DN108: RNCC: 2 | RNVC: 2
MEC10420: RNCC: 3 | RNVC: 2
RAR1390: RNCC: 5 | RNVC: 2
4730GG-DN108: RNCC: 5 | RNVC: 2

19 Jun 1987

4730-14-446-4700
Tube Tee

144464700
0294201970: RNCC: 3 | RNVC: 2

20 Mar 1991

4730-14-569-8798
Special Nipple

145698798
307-025-002-0: RNCC: 3 | RNVC: 2

26 Oct 2011

4730-14-369-6255
Tube Coupling

143696255
1464-40-23REP3: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-259-8091
Tube To Boss Straight Adapter

142598091
NO PRIMARY REF14-259-8091: RNCC: 3 | RNVC: 2
67-073-103-22: RNCC: 5 | RNVC: 2
227199: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-346-9435
Fluid Pressure Line Multiple Connector

143469435
341A75-2017-00: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-407-4277
Tube To Boss Straight Adapter

144074277
12-20-27X200: RNCC: 3 | RNVC: 2
UMA20X27-200N: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-307-7236
Clapet Mobile Equip

143077236
4K05-082: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-468-7547
Tube Coupling Inverted Nut

144687547
MAT853-0032F14: RNCC: 3 | RNVC: 2

16 Mar 1994

4730-14-202-3727
Fluid Passage Bolt

142023727
R13208: RNCC: 3 | RNVC: 2
RA13208: RNCC: 5 | RNVC: 2
84425-08: RNCC: 5 | RNVC: 2
99058270: RNCC: 5 | RNVC: 2
99058270: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-209-0363
Tube To Boss Straight Adapter

142090363
13-18-15-21: RNCC: 3 | RNVC: 2
0946660051: RNCC: 5 | RNVC: 2
0946660051: RNCC: 5 | RNVC: 9
946660051: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-293-9321
Tube To Boss Straight Adapter

142939321
NO PRIMARY REF14-293-9321: RNCC: 3 | RNVC: 2
8640-00-12X17: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-398-5898
Tube Tee

143985898
GSM164-056F11: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-452-8061
Sediment Strainer Element

144528061
105021-00200: RNCC: 3 | RNVC: 2
RAR1462: RNCC: 5 | RNVC: 2

21 Jan 1992

4730-14-269-1817
Pipe Flange

142691817
7066CC1F25: RNCC: 2 | RNVC: 2
4730BE-25F: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-372-5107
Raccord Equipe

143725107
MAT110-02-00-2: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-535-3245

4730-14-297-8970
Bloc De Derivation

142978970
411MA0162FB23: RNCC: 3 | RNVC: 2
411MA162FB23: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-367-7956

4730-14-370-2616

4730-14-482-1243
Flange To Hose Straight Adapter

144821243
33 45 60: RNCC: 3 | RNVC: 2

20 Jun 1996

4730-14-231-5768
Tube Coupling

142315768
EN10242-M2R-L-1-FE-A: RNCC: 2 | RNVC: 2
770271106: RNCC: 3 | RNVC: 2
271-1: RNCC: 5 | RNVC: 2
770 271 106: RNCC: 5 | RNVC: 2
E29801M5F: RNCC: 5 | RNVC: 9
4-1: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-575-4691
Tube Elbow

145754691
508810-1: RNCC: 3 | RNVC: 2

9 Apr 2013

4730-14-489-7210
Fluid Flow Restrictor

144897210
BC1-0,8: RNCC: 3 | RNVC: 2

13 Aug 1997

4730-14-248-9530
Tube Coupling

142489530
1 3-8: RNCC: 3 | RNVC: 2
272 3-8: RNCC: 3 | RNVC: 2
1 3-8: RNCC: 5 | RNVC: 2
43700105: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-559-8778
Fluid Pressure Line Multiple Connector

145598778
COR4PB6-1/4: RNCC: 3 | RNVC: 2

27 Feb 2009

4730-14-479-1802
Hose Fitting Swaging Socket

144791802
FI 2.83.04.02: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-479-1812
Tube Fitting Socket Welded Ferrule

144791812
FI 2.12.36.01: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-537-4716
Tube To Boss Straight Adapter

145374716
783.T.08.10T: RNCC: 3 | RNVC: 2
783T0810T: RNCC: 5 | RNVC: 2
74783T0810T: RNCC: 5 | RNVC: 2
783 T 08 10T: RNCC: 5 | RNVC: 2

3 Nov 2003

4730-14-432-6306
Quick Disconnect Coupling Half

144326306
0033172: RNCC: 3 | RNVC: 2
NBA.2: RNCC: 5 | RNVC: 2

16 Jun 1989

4730-14-338-2519
Bronze Tube Coude

143382519
CSN114: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-338-0789

4730-14-397-7066
Tube Tee

143977066
GSM164-025F34: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-444-3308
Tube Coupling Nut Assembly

144443308
DV110A010-105: RNCC: 3 | RNVC: 9
0801145N00: RNCC: 5 | RNVC: 2

8 Jan 1991

4730-14-295-9192
Self-Sealing Coupling Half

142959192
NO PRIMARY REF14-295-9192: RNCC: 3 | RNVC: 2
DC2-8T: RNCC: 5 | RNVC: 9
DC8F1: RNCC: 5 | RNVC: 9
DC8T1: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-416-3279
Tube Tee

144163279
TMA20X20-27N: RNCC: 3 | RNVC: 2

3 Jun 1987

4730-14-484-5848
Quick Disconnect Coupling Half

144845848
2650-00-09: RNCC: 3 | RNVC: 2

27 Nov 1996

4730-14-436-1792
Hose Expansion Ring

144361792
1467460008: RNCC: 3 | RNVC: 2
146746: RNCC: 5 | RNVC: 2
T6746: RNCC: 5 | RNVC: 9

6 Dec 1989

4730-14-426-7371
Tube Tee

144267371
4730HEEG042,4X6,3: RNCC: 2 | RNVC: 2

20 Sep 1988

4730-14-397-7008
Embout Epaule A Sou

143977008
GSM164-023F43: RNCC: 3 | RNVC: 2
MAT164-0355F43: RNCC: 3 | RNVC: 2
4730ACF4PN100DE42,16: RNCC: 3 | RNVC: 9

14 Dec 1984

4730-14-435-0905
Swivel Flange To Hose Connector

144350905
853-700-491-0: RNCC: 3 | RNVC: 2

18 Oct 1989

4730-14-263-6385
Tube Coupling

142636385
7062BC1RPET2-36CA52-3: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-536-4716
Hose Coupling Assembly

145364716
9-95-25-40: RNCC: 3 | RNVC: 2

27 Aug 2003

4730-14-508-6483
Filler Cap Adapter Assembly

145086483
MAT139-02-00: RNCC: 3 | RNVC: 2

23 Sep 1998

4730-14-503-6771
Fluid Pressure Line Multiple Connector

145036771
SB-12-SM-ZB: RNCC: 3 | RNVC: 2
SB12SM: RNCC: 5 | RNVC: 2

23 Jan 1998

4730-14-378-4202
Fluid Pressure Line Multiple Connector

143784202
366A75-3083-22: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-246-1138
Fluid Passage Bolt

142461138
NO PRIMARY REF14-246-1138: RNCC: 3 | RNVC: 2
ELPEP4E4B: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-514-3624
Tube-Hose Fitting Compression Sleeve

145143624
NO PRIMARY REF14-514-3624: RNCC: 3 | RNVC: 2
NNP4730860757636: RNCC: 5 | RNVC: 2
BAGUE BICONIQUE PR37,5X41,5: RNCC: 5 | RNVC: 2

12 May 1999

4730-14-483-1540
Tube To Boss Straight Adapter

144831540
ML2-K16: RNCC: 3 | RNVC: 2

20 Aug 1996

4730-14-477-7024
Tube To Boss Straight Adapter

144777024
54250-147-1: RNCC: 3 | RNVC: 2
54250-147-1: RNCC: 5 | RNVC: 9

20 Sep 1995

4730-14-299-9186
Pipe Flange

142999186
RUAN7525-20: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-514-6683
Quick Disconnect Coupling Half

145146683
RBE06.2101/IC/6/DKB/JN/OD: RNCC: 3 | RNVC: 2
SIFLSZB001MOF4: RNCC: 5 | RNVC: 2

8 Jun 1999

4730-14-499-3865
Tube To Boss Straight Adapter

144993865
RF5287-0-00: RNCC: 3 | RNVC: 2
RF5287-0-00: RNCC: 5 | RNVC: 9
F300 0T 021 8847: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-431-1477

4730-14-506-8709
Tu Droit Adaptateur

4730-14-507-7099

4730-14-416-4900
Tube Vers Tuy Coude

4730-14-476-7079
Prise De Pression

144767079
202421603860: RNCC: 3 | RNVC: 2

28 Jun 1995

4730-14-411-3655
Raccord Bloc

144113655
DA1D781232001: RNCC: 3 | RNVC: 2

6 Aug 1986

4730-14-568-3463
Hose Tee

145683463
5005630078: RNCC: 1 | RNVC: 2
93400611: RNCC: 3 | RNVC: 2
20712184: RNCC: 5 | RNVC: 2

25 May 2011

4730-14-539-0624
Quick Disconnect Reducer

145390624
NGM0060301015068: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-351-4723
Sediment Strainer Element

143514723
0913310110: RNCC: 3 | RNVC: 2
5000670183: RNCC: 5 | RNVC: 2
0913310110: RNCC: 5 | RNVC: 9
913310110: RNCC: 5 | RNVC: 9

12 Sep 1978

4730-14-364-3737
Pipe Flange

143643737
175535: RNCC: 3 | RNVC: 2

7 Aug 1980

4730-14-563-5995
Tube Elbow

145635995
05B002: RNCC: 3 | RNVC: 2

24 Feb 2010

4730-14-304-6872
Sediment Strainer Body

143046872
P4686A1: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-447-1513
Fluid Passage Bolt

144471513
P109235H: RNCC: 3 | RNVC: 2

3 May 1991

4730-14-458-5152
Tube Coupling Inverted Nut

144585152
L327031: RNCC: 3 | RNVC: 2
91638474: RNCC: 5 | RNVC: 2
DBAL327031: RNCC: 5 | RNVC: 9

23 Oct 1992

4730-14-040-0732
Tube Tee

140400732
R8X12SX12: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-497-6092
Tube To Boss Straight Adapter

144976092
4K8045: RNCC: 3 | RNVC: 2
F300 0T 023 4129: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-538-9664
Return Tube Bend

145389664
NGM0053234404233: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-220-5475
Tube To Boss Straight Adapter

142205475
0000128371: RNCC: 3 | RNVC: 2
0000128371: RNCC: 5 | RNVC: 9
128371: RNCC: 5 | RNVC: 9
128371: RNCC: 6 | RNVC: 9

1 Jan 1965

4730-14-293-3383
Bulkhead Hose Connector

142933383
121E52-125-24-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-393-9179
Tube To Boss Straight Adapter

143939179
2401-9: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-389-5147
Bulkhead Hose Connector

143895147
365A75-2629-20: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-277-4640
Bouchon Rapide

142774640
10151-0: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-454-1617
Jonction A Brides

144541617
22237: RNCC: 3 | RNVC: 2

24 Mar 1992

4730-14-390-3344
Self-Sealing Coupling Half

143903344
088732-01820: RNCC: 3 | RNVC: 2
103298-01820: RNCC: 5 | RNVC: 2

26 Jan 1984

4730-14-568-7398
Pipe Coupling

145687398
1600-0010: RNCC: 3 | RNVC: 2

1 Jul 2011

4730-14-573-6451
Pipe Swivel Joint

145736451
FT 010-201: RNCC: 3 | RNVC: 2

29 Oct 2012

4730-14-249-4657
Raccord Droit De Bo

142494657
3210-16X150NN: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-234-5345
Bouchon Femelle Tub

142345345
JBA04-17-01: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-395-3243
Non-Metallic Connecting Sleeve

143953243
721-910-108: RNCC: 3 | RNVC: 2
21-91-01DN32: RNCC: 3 | RNVC: 2
285-6265: RNCC: 5 | RNVC: 2
721-910-108: RNCC: 5 | RNVC: 2

2 Oct 1984

4730-14-344-1121

4730-14-329-2826
Bride De Calage

143292826
BRIDE80EP30NT6X16DP160: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-575-3297
Pipe Nipple

145753297
D040 03B: RNCC: 3 | RNVC: 2

27 Mar 2013

4730-14-545-4040
Fluid Pressure Line Multiple Connector

145454040
DF1E726200105: RNCC: 3 | RNVC: 2

12 Apr 2005

4730-14-569-3612
Quick Disconnect Coupling Assembly

145693612
8010 06 00: RNCC: 3 | RNVC: 2

8 Sep 2011

4730-14-564-5467
Fluid Pressure Line Multiple Connector

145645467
98413896: RNCC: 3 | RNVC: 2

5 May 2010

4730-14-564-5735
Tube Tee

145645735
T28LCFX: RNCC: 3 | RNVC: 2
A231004000295: RNCC: 5 | RNVC: 2

7 May 2010

4730-14-238-6749
Pipeline Flexible Spacer

142386749
NT1 H 250 B405 CB/MARINE: RNCC: 3 | RNVC: 2
DILNE250MAR: RNCC: 3 | RNVC: 9
I131NE250MAR: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-238-6090

4730-14-326-8609
Tube Tee

143268609
300594PS: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-504-4847
Tube To Boss Straight Adapter

145044847
TR95933: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-457-8921
Tube Tee

144578921
4730JCEG042,4X05: RNCC: 2 | RNVC: 2

26 Sep 1992

4730-14-365-9839

4730-14-363-5412

4730-14-216-1234
Raccord Special

142161234
SKC580A: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-300-4975

4730-14-209-1213

4730-14-419-0758
Quick Disconnect Coupling Half

144190758
N00411875: RNCC: 3 | RNVC: 2
N004118-75: RNCC: 5 | RNVC: 2

30 Sep 1987

4730-14-272-9301
Tube Coupling Inverted Nut

142729301
84404-06: RNCC: 1 | RNVC: 2
Q151R5506: RNCC: 3 | RNVC: 2
84404-060-000-000: RNCC: 5 | RNVC: 2
RQ15-1R5506: RNCC: 5 | RNVC: 2
403231: RNCC: 5 | RNVC: 2
91313478: RNCC: 5 | RNVC: 2
R5506: RNCC: 5 | RNVC: 2
403231: RNCC: 5 | RNVC: 2
Q15-1R5506: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-276-9907
Tube Tee

142769907
TR2-664-631X6214: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-553-5501
Fluid Flow Restrictor Unit

145535501
3730-91-03: RNCC: 3 | RNVC: 2

16 Apr 2007

4730-14-551-8150
Hose Coupling Assembly

145518150
SPX12-2616JV: RNCC: 3 | RNVC: 2
436844: RNCC: 5 | RNVC: 2

26 Oct 2006

4730-14-210-3607
Raccord Special

142103607
823-33-40: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-490-5538
Special-Shaped Hose Clamp

144905538
J05085-04-0800P044: RNCC: 3 | RNVC: 2

2 Oct 1997

4730-14-473-9499
Tube To Boss Straight Adapter

144739499
4A25-27X200NU: RNCC: 3 | RNVC: 2
204104486NU: RNCC: 5 | RNVC: 2
82126400: RNCC: 5 | RNVC: 2
5005030903: RNCC: 5 | RNVC: 2

18 Jan 1995

4730-14-333-5849
Quick Disconnect Coupling Half

143335849
RBE06-7808/OD/IC: RNCC: 3 | RNVC: 2
719154: RNCC: 3 | RNVC: 2
RBE6-7808IC0D: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-390-6067
Tube To Boss Straight Adapter

143906067
8966081066: RNCC: 3 | RNVC: 2
896608109966: RNCC: 5 | RNVC: 2

26 Jan 1984

4730-14-576-2953
Pipe Fitting Assortment

145762953
0964 198 8: RNCC: 3 | RNVC: 2

11 Jun 2013

4730-14-464-1660
Tube To Boss Straight Adapter

144641660
RV4206: RNCC: 3 | RNVC: 2

15 Jul 1993

4730-14-526-8192
Tube Tee

145268192
98402001: RNCC: 3 | RNVC: 2
5005430267: RNCC: 5 | RNVC: 2

7 Sep 2001

4730-14-203-6462
Tube Coupling

142036462
EA25: RNCC: 3 | RNVC: 2
337942: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-14-551-8389
Hydraulic Swivel Joint

145518389
WH08LRKDSOMDCF: RNCC: 3 | RNVC: 2
437081: RNCC: 5 | RNVC: 2
WH08LRKDSOMDCF: RNCC: 5 | RNVC: 9

30 Oct 2006

4730-14-311-3627
Tube Coupling

143113627
188583: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-538-7784
Sound Isolation Insert Set

145387784
NGM0011040351592: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-519-1182
Hose Fitting Swaging Socket

145191182
JUPE000002: RNCC: 3 | RNVC: 2

8 Mar 2000

4730-14-423-7093
Tube Fitting Clinch Sleeve

144237093
8224S20 00: RNCC: 3 | RNVC: 2
107094: RNCC: 5 | RNVC: 2
D20S: RNCC: 5 | RNVC: 2

28 Apr 1988

4730-14-414-0317
Accouplemen Raccord

144140317
160H632503-147: RNCC: 3 | RNVC: 2

22 Jan 1987

4730-14-494-8069
Tube To Boss Straight Adapter

144948069
NO PRIMARY REF14-494-8069: RNCC: 3 | RNVC: 2
1884023: RNCC: 5 | RNVC: 9
F300 0T 017 9282: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-327-8313
Pipe Expansion Joint

143278313
307-230-150-25-130: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-300-7532
Tube Tee

143007532
GSM523-026F51: RNCC: 3 | RNVC: 2
411MA127FB16: RNCC: 5 | RNVC: 2
GSM523-26F51: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-247-3348
Raccord Special

142473348
321A75-0871-00: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-577-5930
Fluid-Emulsion Spray Nozzle

145775930
NO PRIMARY REF 14-577-5930: RNCC: 3 | RNVC: 2
C500555: RNCC: 5 | RNVC: 2
OL-C500555: RNCC: 5 | RNVC: 2

26 Sep 2013

4730-14-339-9752
Pipe Flange

143399752
GSM162-009F10: RNCC: 3 | RNVC: 2
GSM162-09F10: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-545-2781
Self-Sealing Coupling Half

145452781
DEMI000029: RNCC: 3 | RNVC: 2
AUK3214/026S: RNCC: 5 | RNVC: 2

31 Mar 2005

4730-14-513-4068
Lubrication Fitting

145134068
NO PRIMARY REF14-513-4068: RNCC: 3 | RNVC: 2
NNP 2805860376741: RNCC: 5 | RNVC: 9

17 Mar 1999

4730-14-332-2771
Jeu Demi-Manchons

143322771
L50.316.06: RNCC: 3 | RNVC: 2
L50-316-06: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-404-1246
Tube To Boss Straight Adapter

144041246
0517-02-07-2: RNCC: 3 | RNVC: 2

11 Sep 1985

4730-14-535-1352
Tube To Boss Straight Adapter

145351352
81107200: RNCC: 3 | RNVC: 2
5005030922: RNCC: 5 | RNVC: 2

14 May 2003

4730-14-511-7924
Tube To Hose Straight Adapter

145117924
A3-55: RNCC: 3 | RNVC: 2
A3-55-RACCORD FEMELLE 3/8": RNCC: 3 | RNVC: 2

20 Jan 1999

4730-14-548-1510
Hydraulic System Accessories Manifold

145481510
10630175001: RNCC: 3 | RNVC: 2

13 Dec 2005

4730-14-278-8172
Tube Tee

142788172
10193AREP219: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-365-6833
Tube Tee

143656833
9450001958: RNCC: 3 | RNVC: 2
VDP4799: RNCC: 5 | RNVC: 2

8 Oct 1980

4730-14-504-1925
Tube-Pipe Fitting Kit

145041925
1695236M5: RNCC: 3 | RNVC: 2

11 Feb 1998

4730-14-504-4874
Tube To Boss Straight Adapter

145044874
UM161217: RNCC: 3 | RNVC: 2
TR95917: RNCC: 5 | RNVC: 9

18 Feb 1998

4730-14-458-3635
Fluid Passage Bolt

144583635
0281607780: RNCC: 3 | RNVC: 2
1014288P00: RNCC: 5 | RNVC: 2

20 Oct 1992

4730-14-421-2959
Lubrication Fitting

144212959
5000655482: RNCC: 3 | RNVC: 2
89414432: RNCC: 5 | RNVC: 2

14 Jan 1988

4730-14-476-1473
Tube To Boss Straight Adapter

144761473
46800500: RNCC: 3 | RNVC: 2
M4ZS460D8658: RNCC: 5 | RNVC: 2

24 May 1995

4730-14-506-0333
Flange To Tube Elbow

145060333
RA1M521006280A1: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-270-2482
Fluid Pressure Line Multiple Connector

142702482
9776160801: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-522-1479
Tube Coupling

145221479
0319203540: RNCC: 3 | RNVC: 2

4 Oct 2000

4730-14-523-1332
Tube Coupling

145231332
425322N: RNCC: 3 | RNVC: 2

8 Jan 2001

4730-14-436-2061
Bulkhead Hose Connector

144362061
DA2C228585120A1: RNCC: 3 | RNVC: 2

6 Dec 1989

4730-14-401-7553
Tube Union

144017553
NO PRIMARY REF14-401-7553: RNCC: 3 | RNVC: 2
EA25M0AD: RNCC: 5 | RNVC: 9

13 Jun 1985

4730-14-423-4474
Pipe Flange

144234474
UA50088006PN50-11B2SDN50: RNCC: 2 | RNVC: 2
4730HCPN50DN05011B2S: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-376-7601
Fluid Pressure Line Multiple Connector

143767601
1110080028: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-540-9884
Tube-Hose Fitting Compression Sleeve

145409884
PMEM50V08: RNCC: 3 | RNVC: 2

5 May 2004

4730-14-319-4800
Tube To Boss Straight Adapter

143194800
DLT113428: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-551-6072
Tube Coupling

145516072
713435: RNCC: 3 | RNVC: 2

9 Oct 2006

4730-14-471-0161
Tube To Boss Straight Adapter

144710161
54311-076-1: RNCC: 3 | RNVC: 2
54311-076-1: RNCC: 5 | RNVC: 2
54311-076-1: RNCC: 5 | RNVC: 9

20 Jul 1994

4730-14-295-4083
Bulkhead Hose Connector

142954083
121E77-200-03-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-244-0287
Tube Tee

142440287
NG40901-4APL49N0M1: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-246-2823
Tube Tee

142462823
721-200-106: RNCC: 3 | RNVC: 2
21-20-01DN20: RNCC: 5 | RNVC: 2
285-6158: RNCC: 5 | RNVC: 2
721-200-106: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-355-5612
Tube To Boss Straight Adapter

143555612
G1DM17-12X17C0: RNCC: 3 | RNVC: 2
5BAG17-12-17C0: RNCC: 3 | RNVC: 2
ACAG17X12-17N: RNCC: 3 | RNVC: 2

19 Mar 1979

4730-14-450-4405
Pipe Flange

144504405
4730HBPN16DN032: RNCC: 2 | RNVC: 2

9 Oct 1991

4730-14-543-8283
Tube To Boss Straight Adapter

145438283
9450137: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-449-6830
Tube To Boss Straight Adapter

144496830
920 48 00: RNCC: 3 | RNVC: 2

2 Sep 1991

Load More Results