What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 165 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 165 of 185

4730-14-454-2351
Quick Disconnect Coupling Half

144542351
TB2030403: RNCC: 3 | RNVC: 2

26 Mar 1992

4730-14-373-1213
Hydraulic System Accessories Manifold

143731213
EDM0007: RNCC: 3 | RNVC: 2
96054617: RNCC: 5 | RNVC: 2

21 Oct 1981

4730-14-294-0684
Quick Disconnect Coupling Half

142940684
E29572C40BZ: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-550-8779
Tube Tee

145508779
T40F: RNCC: 3 | RNVC: 2

26 Jul 2006

4730-14-497-8927
Hydraulic Manifold Assembly

144978927
21996: RNCC: 3 | RNVC: 2
SCM45SP: RNCC: 5 | RNVC: 2

22 Oct 1997

4730-14-309-5004
Pipeline Flexible Spacer

143095004
DILAT0FLEXNT100HHPN16: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-456-0631
Quick Disconnect Coupling Half

144560631
DCN316-8F/8B: RNCC: 3 | RNVC: 2
DCN316-8F/8B: RNCC: 3 | RNVC: 9
RAR1373: RNCC: 5 | RNVC: 2

17 Jun 1992

4730-14-268-5086
Return Tube Bend

142685086
A49182C70ASJ: RNCC: 2 | RNVC: 2
3D180-70MM: RNCC: 3 | RNVC: 2
3D180-70MM: RNCC: 3 | RNVC: 2
E29-044-70MM180: RNCC: 5 | RNVC: 2
3D180-70MM: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-562-5934
Pipeline Flexible Spacer

145625934
R1/125/KR 320-WG/P/AV: RNCC: 3 | RNVC: 2

5 Nov 2009

4730-14-428-5200
Manchon Corps

144285200
NO PRIMARY REF14-428-5200: RNCC: 3 | RNVC: 2
48186: RNCC: 5 | RNVC: 9

8 Dec 1988

4730-14-336-8956

4730-14-299-2664
Raccord Avec Purge

142992664
56549: RNCC: 3 | RNVC: 2
56549: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-569-7067
Self-Sealing Coupling Assembly

145697067
PPM14: RNCC: 3 | RNVC: 2

17 Oct 2011

4730-14-367-7888

4730-14-367-7930

4730-14-338-2551

4730-14-463-2491
Manchette Double

144632491
LN326-056-10DN10: RNCC: 3 | RNVC: 2

2 Jun 1993

4730-14-243-7417
Raccord Union Simpl

142437417
NO PRIMARY REF14-243-7417: RNCC: 3 | RNVC: 2
33840DET14: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-578-3828
Hose Coupling

145783828
00010: RNCC: 3 | RNVC: 2
A4-33683: RNCC: 5 | RNVC: 2

25 Nov 2013

4730-14-514-3208
Tube Fitting Insert

145143208
18PR000A0488N: RNCC: 3 | RNVC: 2
213EPA64400-001-D: RNCC: 5 | RNVC: 2

11 May 1999

4730-14-536-7644
Tube To Boss Straight Adapter

145367644
E4M524-38-02-1: RNCC: 3 | RNVC: 2

16 Sep 2003

4730-14-219-0900
Bride A Zinc

142190900
536-410-007DET1-2DN50: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-569-5997
Tube Cap

145695997
VKAM25S71: RNCC: 3 | RNVC: 2

3 Oct 2011

4730-14-210-9776
Te De Reduction

142109776
1TR14X10X14: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-576-1835
Flange To Flange Straight Adapter

145761835
M2821324320000: RNCC: 3 | RNVC: 2

4 Jun 2013

4730-14-367-7240

4730-14-367-7287

4730-14-219-0709

4730-14-496-3889
Tube To Boss Straight Adapter

144963889
194535: RNCC: 3 | RNVC: 2
F300 0T 021 4767: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-471-0878
Hose To Boss Straight Adapter

144710878
37763: RNCC: 3 | RNVC: 2

27 Jul 1994

4730-14-376-3550
Pipe Flange

143763550
065-30-9013PL2DN125: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-516-8496
Return Tube Bend

145168496
101160601920: RNCC: 3 | RNVC: 2

20 Oct 1999

4730-14-332-1929
Tube To Boss Straight Adapter

143321929
3032159: RNCC: 3 | RNVC: 2
3457001: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-393-7247
Sediment Strainer Element

143937247
500224: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-413-5123
Tube To Boss Straight Adapter

144135123
71809: RNCC: 3 | RNVC: 2

17 Dec 1986

4730-14-527-3837
Tube To Boss Straight Adapter

145273837
H145306A: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-448-0686
Bulkhead Hose Connector

144480686
PM1A711022060A1: RNCC: 3 | RNVC: 2
PM1A711022060A1: RNCC: 5 | RNVC: 2

12 Jun 1991

4730-14-427-1097
Obturation Raccord

144271097
547705: RNCC: 3 | RNVC: 2

6 Oct 1988

4730-14-246-5857

4730-14-561-5506
Hose Clamp

145615506
TORRO 35-50/12 W4: RNCC: 3 | RNVC: 2
0136 7704 043: RNCC: 5 | RNVC: 2
136 7704 043: RNCC: 5 | RNVC: 2
ICE1250: RNCC: 5 | RNVC: 2
189598962: RNCC: 5 | RNVC: 2

28 Jul 2009

4730-14-270-9662
Swivel Retaining Pipe Flange

142709662
355697: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-487-5427
Bulkhead Hose Connector

144875427
RA1M521203170: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-382-8817
Tube To Boss Straight Adapter

143828817
PE60829H18: RNCC: 3 | RNVC: 2

19 Apr 2000

4730-14-458-5151
Tube Coupling Inverted Nut

144585151
L327012: RNCC: 3 | RNVC: 2
91638473: RNCC: 5 | RNVC: 2
DBAL327012: RNCC: 5 | RNVC: 9

23 Oct 1992

4730-14-351-7979
Tube Tee

143517979
02542850600: RNCC: 3 | RNVC: 2
025428506: RNCC: 5 | RNVC: 2

12 Sep 1978

4730-14-214-5688
Fluid Pressure Line Multiple Connector

142145688
5010399972: RNCC: 3 | RNVC: 2
0000471445: RNCC: 5 | RNVC: 9
0000471445: RNCC: 5 | RNVC: 9
471445: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-388-7595
Fluid Passage Bolt

143887595
M4ZS500D5821: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-040-3832
Flexible Tube Coupling Assembly

140403832
L20A3: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-456-5424
Tube Coupling

144565424
16011410G: RNCC: 3 | RNVC: 2
62035: RNCC: 5 | RNVC: 9

8 Jul 1992

4730-14-519-4690
Fluid Pressure Line Multiple Connector

145194690
WH8PLRKDSA3C: RNCC: 3 | RNVC: 2
435949: RNCC: 5 | RNVC: 9

22 Mar 2000

4730-14-556-9856
Hose Coupling

145569856
001913: RNCC: 3 | RNVC: 2

25 Apr 2008

4730-14-447-6608
Tube To Boss Straight Adapter

144476608
UMIBGS12X3/8S: RNCC: 3 | RNVC: 9

29 May 1991

4730-14-505-1741
Fluid Pressure Line Multiple Connector

145051741
1977D16-01: RNCC: 3 | RNVC: 2

11 Mar 1998

4730-14-432-9408
Hose To Boss Straight Adapter

144329408
AFL14G3-8BSP: RNCC: 3 | RNVC: 2
AFL14G3-8H: RNCC: 5 | RNVC: 2

4 Jul 1989

4730-14-338-2567
Graisseur Allonge

143382567
5011200-10X150: RNCC: 3 | RNVC: 2
ALG5011200-10X150: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-295-6222

4730-14-335-1366
Pipeline Flexible Spacer

143351366
I131NTE1100MAR: RNCC: 2 | RNVC: 2
DILNTE1100MAR: RNCC: 3 | RNVC: 2
I131NTE1100MARR: RNCC: 5 | RNVC: 2
DILNTE1100MARR: RNCC: 5 | RNVC: 9

3 Jun 1976

4730-14-274-6941
Tube Tee

142746941
R4SX4X6: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-410-2682
Pipe Flange

144102682
29028523: RNCC: 3 | RNVC: 2

18 Jun 1986

4730-14-330-1685
Pipe Flange

143301685
D41473: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-313-7427
Swivel Flange To Hose Elbow

143137427
0257850100: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-427-8934
Tube To Boss Straight Adapter

144278934
EGE08SRED71: RNCC: 3 | RNVC: 2
EGE08SRED71: RNCC: 3 | RNVC: 9
RAR1406: RNCC: 5 | RNVC: 2
EVGE8PSRED1.4571: RNCC: 5 | RNVC: 9
EVGE8PSRED71: RNCC: 5 | RNVC: 9

19 Nov 1988

4730-14-509-3130
Tube To Boss Straight Adapter

145093130
095381269: RNCC: 3 | RNVC: 2

27 Oct 1998

4730-14-481-2176
Tube To Boss Straight Adapter

144812176
23 48 00: RNCC: 3 | RNVC: 2

25 Apr 1996

4730-14-315-1705
Fluid Pressure Line Multiple Connector

143151705
0000364130: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-372-7283
Tube To Boss Straight Adapter

143727283
23S06044: RNCC: 3 | RNVC: 2
23S06044: RNCC: 5 | RNVC: 2

21 Sep 1981

4730-14-031-1345
Tube To Boss Straight Adapter

140311345
53391: RNCC: 3 | RNVC: 2
VDPM02763: RNCC: 5 | RNVC: 2

14 Jun 1980

4730-14-444-7243
Fluid Pressure Line Multiple Connector

144447243
73068: RNCC: 3 | RNVC: 2

21 Jan 1991

4730-14-494-5363
Anchor And Reinforcement Pipe Clamp

144945363
602 757 93: RNCC: 3 | RNVC: 2
F300 0T 017 4536: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-494-5490
Tube To Boss Straight Adapter

144945490
643 064 20: RNCC: 3 | RNVC: 2
F300 0T 017 4668: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-448-0917
Bulkhead Hose Connector

144480917
DA2C813320005: RNCC: 3 | RNVC: 2

12 Jun 1991

4730-14-506-0351
Flange To Tube Elbow

145060351
RA1M521102191U1: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-520-2291
Return Tube Bend

145202291
10022994: RNCC: 3 | RNVC: 2

17 May 2000

4730-14-483-2793
Hose Coupling Assembly

144832793
DA2C729001160: RNCC: 3 | RNVC: 2

29 Aug 1996

4730-14-413-1189
Tube To Boss Straight Adapter

144131189
1204-20-27X150: RNCC: 3 | RNVC: 2
5A20-27X150: RNCC: 3 | RNVC: 2

26 Nov 1986

4730-14-461-6233
Bulkhead Hose Connector

144616233
S4710X0002-2994: RNCC: 2 | RNVC: 2
F0532S4710X0002-2994: RNCC: 3 | RNVC: 2
LW101-DW5271N: RNCC: 3 | RNVC: 2
UA4CL16DTNUCW12: RNCC: 5 | RNVC: 2

17 Mar 1993

4730-14-529-5442
Pipe Flange

145295442
330A87-0514-00: RNCC: 3 | RNVC: 2

29 Mar 2002

4730-14-218-3791
Fluid Passage Bolt

142183791
52S16-28-1: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-503-6769
Adaptateur

145036769
BESS12S3-8NPT: RNCC: 3 | RNVC: 2

23 Jan 1998

4730-14-411-1880
Fluid Pressure Line Multiple Connector

144111880
332A75-2220-20: RNCC: 3 | RNVC: 2

6 Aug 1986

4730-14-372-5320
Manchette A Pince V

143725320
M10-72B108: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-478-2103
Quick Disconnect Coupling Half

144782103
RBE11-1152/OD/IC/3/VS/FB: RNCC: 3 | RNVC: 2
91729039: RNCC: 5 | RNVC: 2

18 Oct 1995

4730-14-431-1528
Pipe Flange

144311528
MEC11368: RNCC: 3 | RNVC: 2
6784-1CL14A: RNCC: 3 | RNVC: 9

10 Apr 1989

4730-14-365-7901
T Obturateur Embout

143657901
908-004-01: RNCC: 3 | RNVC: 2

8 Oct 1980

4730-14-502-3146
Flange To Tube Straight Adapter

145023146
3B99-177: RNCC: 3 | RNVC: 2

9 Dec 1997

4730-14-355-2044
Tube To Boss Straight Adapter

143552044
UMA10X18-150: RNCC: 3 | RNVC: 2
4A10-18X150: RNCC: 3 | RNVC: 2
4A10-18X150: RNCC: 3 | RNVC: 9
204104163: RNCC: 5 | RNVC: 2
82122500: RNCC: 5 | RNVC: 2
093259T: RNCC: 5 | RNVC: 2

19 Mar 1979

4730-14-405-9221
Tube To Hose Straight Adapter

144059221
G12-21-12-17CONU: RNCC: 3 | RNVC: 2
UMCAG21X12-17NNU: RNCC: 3 | RNVC: 2
4AG21-12-17CONU: RNCC: 3 | RNVC: 2
10340: RNCC: 5 | RNVC: 2

12 Dec 1985

4730-14-313-6730
Pipe Flange

143136730
311-077-11756: RNCC: 3 | RNVC: 2
11756: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-292-4763
Tube To Boss Straight Adapter

142924763
F521-03832: RNCC: 3 | RNVC: 2
F521-03-832: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-321-9662
Pipe Flange

143219662
MAT147-0043F8: RNCC: 3 | RNVC: 2
GSM147-004F12: RNCC: 3 | RNVC: 9
MAT147-0044: RNCC: 4 | RNVC: 1
GSM147-04F12: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-471-7095
Bulkhead Hose Connector

144717095
LN327-01508DN100: RNCC: 3 | RNVC: 2

13 Sep 1994

4730-14-422-1026
Tube Union

144221026
72235-05909: RNCC: 3 | RNVC: 2

23 Feb 1988

4730-14-362-1248
Pipe Flange

143621248
U1198F4-219-1Z2CND17-13: RNCC: 2 | RNVC: 2

20 Feb 1980

4730-14-565-2210
Tube Tee

145652210
839.075.075: RNCC: 3 | RNVC: 2
SA017530: RNCC: 5 | RNVC: 2

28 Jul 2010

4730-14-388-6927
Pipe Flange

143886927
F85-168: RNCC: 3 | RNVC: 9

3 Nov 1983

4730-14-491-5352
Fluid Passage Bolt

144915352
NO PRIMARY REF14-491-5352: RNCC: 3 | RNVC: 2
5000240860: RNCC: 5 | RNVC: 9
F300 0T 003 2387: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-279-5595
Self-Sealing Coupling Half

142795595
9949124A: RNCC: 3 | RNVC: 2
9949124: RNCC: 5 | RNVC: 2
TAHM755S4-710-4S: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-254-6984
Tube Fitting Clinch Sleeve

142546984
DIG49N: RNCC: 3 | RNVC: 2
1IG49: RNCC: 3 | RNVC: 2
BEG49: RNCC: 3 | RNVC: 2
G205-49: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-516-2681
Quick-Disconnect Nipple

145162681
TA5012P001: RNCC: 3 | RNVC: 2

15 Sep 1999

4730-14-434-6949
Adaptateur Bride

144346949
BN329515C2DN250INOX: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-312-4826

4730-14-212-1534

4730-14-278-0962

4730-14-213-8260
Raccord Mise A Lair

142138260
219055: RNCC: 3 | RNVC: 2
219055: RNCC: 5 | RNVC: 2
219055: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-444-1744
Fluid Passage Bolt

144441744
PM1A729009008A1: RNCC: 3 | RNVC: 2
PM1A729009008A1: RNCC: 5 | RNVC: 2

18 Dec 1990

4730-14-371-2869
Hose Coupling Assembly

143712869
377610700: RNCC: 3 | RNVC: 9

5 Aug 1981

4730-14-446-0084
Hose To Boss Straight Adapter

144460084
3565598MI: RNCC: 3 | RNVC: 2

4 Mar 1991

4730-14-498-9636
Tube To Boss Straight Adapter

144989636
5000293140: RNCC: 3 | RNVC: 2
F00078210: RNCC: 3 | RNVC: 2
F00078210: RNCC: 5 | RNVC: 9
F300 0T 014 1351: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-397-9405
Tube Tee

143979405
17-20-2TF: RNCC: 3 | RNVC: 2
TA20N2NE: RNCC: 3 | RNVC: 2
10A202NE: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-526-2244
Lubrication Fitting

145262244
353042SM: RNCC: 3 | RNVC: 2

11 Jul 2001

4730-14-382-8732
Tube To Boss Straight Adapter

143828732
PE60844H08: RNCC: 3 | RNVC: 2

26 Jul 2000

4730-14-420-1112
Sand Blast Nozzle

144201112
53C: RNCC: 3 | RNVC: 9

18 Nov 1987

4730-14-456-3296
Fluid Pressure Line Multiple Connector

144563296
DLT024760: RNCC: 3 | RNVC: 2

30 Jun 1992

4730-14-535-4719
Tube To Boss Straight Adapter

145354719
3450000002: RNCC: 3 | RNVC: 2
5010260160: RNCC: 5 | RNVC: 2

27 May 2003

4730-14-445-4503
Hydraulic Manifold Assembly

144454503
AMD5844: RNCC: 3 | RNVC: 2

14 Feb 1991

4730-14-454-8902
Fluid Passage Bolt

144548902
5000659957: RNCC: 3 | RNVC: 2

24 Apr 1992

4730-14-382-3974
Fluid Pressure Line Multiple Connector

143823974
BAZ98781: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-398-6293
Tube To Boss Straight Adapter

143986293
8401202747: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-575-7648
Flange To Tube Straight Adapter

145757648
M2811342200000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-325-1706

4730-14-262-1739

4730-14-571-4436
Fluid Passage Bolt

145714436
6854-82: RNCC: 3 | RNVC: 2

27 Mar 2012

4730-14-298-9566
Tube To Boss Straight Adapter

142989566
000556282P: RNCC: 3 | RNVC: 2
0UT1-127: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-361-6341

4730-14-211-2297
Tube To Boss Straight Adapter

142112297
8185: RNCC: 3 | RNVC: 2
8185: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-040-0069
Bulkhead Hose Connector

140400069
0064631000: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-528-7087
Lubrication Fitting

145287087
15937: RNCC: 3 | RNVC: 2

6 Feb 2002

4730-14-407-5767
Self-Sealing Coupling Assembly

144075767
96109620: RNCC: 3 | RNVC: 2

27 Feb 1986

4730-14-382-8756
Tube To Boss Straight Adapter

143828756
PE60841H10: RNCC: 3 | RNVC: 2

2 Aug 2000

4730-14-373-3934
Sediment Strainer Element

143733934
10052-150: RNCC: 3 | RNVC: 2

21 Oct 1981

4730-14-570-7366
Quick Disconnect Wye

145707366
M33278: RNCC: 3 | RNVC: 2

19 Jan 2012

4730-14-394-3620
Roue Bbd4 Filt Sabl

143943620
0RIENT9BB70: RNCC: 3 | RNVC: 2

28 Aug 1984

4730-14-575-2760
Lubrication Fitting

145752760
735612: RNCC: 3 | RNVC: 2
05900443: RNCC: 5 | RNVC: 2

25 Mar 2013

4730-14-365-2855

4730-14-200-8504

4730-14-374-7412
Self-Sealing Coupling Half

143747412
1-13-435-2: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-218-3089
Fluid Pressure Line Multiple Connector

142183089
L351108: RNCC: 3 | RNVC: 2
351108: RNCC: 5 | RNVC: 2
35686: RNCC: 5 | RNVC: 2
351108-80: RNCC: 5 | RNVC: 2
0605325600: RNCC: 5 | RNVC: 2
DBAL351108: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-339-0954
Equer Partie Mobile

143390954
GSM425-004F29: RNCC: 3 | RNVC: 2
GSM425-04F29: RNCC: 5 | RNVC: 2
A0009-030F4: RNCC: 5 | RNVC: 2

17 Dec 1976

4730-14-328-0080
Tube To Boss Straight Adapter

143280080
91141882: RNCC: 3 | RNVC: 2
A4-18-22X150: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-031-0631
Tube To Boss Straight Adapter

140310631
LL9101-10-17F: RNCC: 3 | RNVC: 2
9101101751: RNCC: 3 | RNVC: 2
9101101730: RNCC: 5 | RNVC: 2
VDP5162: RNCC: 5 | RNVC: 2
9401101758: RNCC: 5 | RNVC: 2
LL9101-10-17F: RNCC: 5 | RNVC: 2
A3-10-12-17-51: RNCC: 5 | RNVC: 9

14 Jun 1980

4730-14-495-1708
Union Double

144951708
NO PRIMARY REF14-495-1708: RNCC: 3 | RNVC: 2
CH256046: RNCC: 5 | RNVC: 9
F300 0T 018 6088: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-573-8819
Tube Union

145738819
NSA855031-16: RNCC: 1 | RNVC: 2
PE20201J-16S: RNCC: 3 | RNVC: 2
NSA855031-16: RNCC: 5 | RNVC: 2

19 Nov 2012

4730-14-262-1558
Pipe Flange

142621558
7062DJ1F1F25-3-5XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-273-5413

4730-14-262-1964

4730-14-321-2594

4730-14-234-1840
Bouchon

142341840
110318: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-277-2949

4730-14-214-5064

4730-14-572-7471
Pipe Elbow Assembly

145727471
058-004-201-6: RNCC: 3 | RNVC: 2

30 Jul 2012

4730-14-239-6897

4730-14-388-4389
Tube-Hose Fitting Compression Sleeve

143884389
D264838: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-298-9570
Fluid Pressure Line Multiple Connector

142989570
000542282P: RNCC: 3 | RNVC: 2
0UT1-113: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-480-9034
Tube To Hose Straight Adapter

144809034
M4ZS460D8708: RNCC: 3 | RNVC: 2

11 Apr 1996

4730-14-455-4014
Tube Tee

144554014
R6518: RNCC: 3 | RNVC: 2
91727477: RNCC: 5 | RNVC: 2

21 May 1992

4730-14-502-3704
Tube Tee

145023704
41058: RNCC: 3 | RNVC: 2

9 Dec 1997

4730-14-492-2934
Tube To Boss Straight Adapter

144922934
0033715036: RNCC: 3 | RNVC: 2
F300 0T 007 3270: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-422-6849
Sediment Strainer Element

144226849
5828148069: RNCC: 3 | RNVC: 2

15 Mar 1988

4730-14-434-8007
Tube To Boss Straight Adapter

144348007
PE69001K08: RNCC: 3 | RNVC: 2

4 Oct 1989

4730-14-497-5976
Tube To Boss Straight Adapter

144975976
4B2657: RNCC: 3 | RNVC: 2
F300 0T 023 4010: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-226-0262

4730-14-355-5688

4730-14-453-3967
Sediment Strainer Element

144533967
160-112AC5X35-5: RNCC: 3 | RNVC: 2

19 Feb 1992

4730-14-373-7020
Bulkhead Hose Connector

143737020
304-914-301-0: RNCC: 3 | RNVC: 2

13 Nov 1981

4730-14-332-3776
Tube To Boss Straight Adapter

143323776
613-413-031-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-466-4393
Pipeline Flexible Spacer

144664393
53-D-034-00: RNCC: 3 | RNVC: 2

5 Nov 1993

4730-14-222-2577
Fluid Passage Bolt

142222577
NO PRIMARY REF14-222-2577: RNCC: 3 | RNVC: 2
6-107: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-286-0394

4730-14-212-1201

4730-14-392-4349
Lubrication Fitting

143924349
ZNP012000: RNCC: 3 | RNVC: 9

21 Mar 1984

4730-14-414-5100
Tube To Boss Straight Adapter

144145100
8401168066NU: RNCC: 3 | RNVC: 2

5 Feb 1987

4730-14-270-2478
Fluid Pressure Line Multiple Connector

142702478
0000301180: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-344-5102

4730-14-249-8450

4730-14-410-7400
Fluid Flow Restrictor

144107400
A02358-02-3000T001: RNCC: 3 | RNVC: 2

9 Jul 1986

4730-14-345-7320
Quick Disconnect Coupling Assembly

143457320
M10-111PL2: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-494-0277
Tube To Boss Straight Adapter

144940277
NO PRIMARY REF14-494-0277: RNCC: 3 | RNVC: 2
UM13-8X13C0: RNCC: 5 | RNVC: 9
F300 0T 015 0902: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-222-6536
Tube Fitting Brazing Ferrule

142226536
GSM1297F1AF1BTABLEAU1D1-36I30: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-337-2266
Fluid Pressure Line Multiple Connector

143372266
2880-040: RNCC: 3 | RNVC: 2

7 Oct 1976

4730-14-457-3794
Pipe Flange

144573794
Y07176-00-0000P011: RNCC: 3 | RNVC: 2

27 Aug 1992

4730-14-313-1130
Tube Tee

143131130
57-18: RNCC: 3 | RNVC: 2
TL18N: RNCC: 3 | RNVC: 2
10L18: RNCC: 3 | RNVC: 2
TL18: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-339-9882
Bulkhead Hose Connector

143399882
GSM425-025F34: RNCC: 3 | RNVC: 2
A0009-033F34: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-328-4333
Lubrication Fitting

143284333
5004-12X150: RNCC: 3 | RNVC: 2
ALG5004-12X150: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-556-1306
Quick-Disconnect Nipple

145561306
SCB08.1103/IC/VS: RNCC: 3 | RNVC: 2

4 Feb 2008

4730-14-503-7966
Suction Pump Connector

145037966
2163-1195-010/29679: RNCC: 3 | RNVC: 2
2163-1195-010: RNCC: 5 | RNVC: 9

28 Jan 1998

4730-14-211-0693
Sediment Strainer Body

142110693
14779: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-463-5519
Fluid Passage Bolt

144635519
123067298: RNCC: 3 | RNVC: 9

17 Jun 1993

4730-14-574-5807
Pipe Fitting Assortment

145745807
8818333000: RNCC: 3 | RNVC: 2

1 Feb 2013

4730-14-567-1366
Sediment Strainer Element

145671366
PFI: RNCC: 3 | RNVC: 2

14 Feb 2011

4730-14-366-6012

4730-14-359-5436

4730-14-365-9832

4730-14-405-4467
Embout Adaptation

144054467
20-91-02-32-1: RNCC: 3 | RNVC: 2

27 Nov 1985

4730-14-569-2939
Sediment Strainer Element

145692939
NO PRIMARY REF 14-569-2939: RNCC: 3 | RNVC: 2
TAMIS 200 MICRON 20AX002 DN150: RNCC: 5 | RNVC: 2

1 Sep 2011

4730-14-228-6890
Tube To Boss Straight Adapter

142286890
NO PRIMARY REF14-228-6890: RNCC: 3 | RNVC: 2
NF436: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-216-2179
Fluid Pressure Line Multiple Connector

142162179
A6-24391M1: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-520-1111
Tube Union

145201111
EP533T1208: RNCC: 3 | RNVC: 2
TC5110-12-08T: RNCC: 5 | RNVC: 2

10 May 2000

4730-14-376-3541
Sediment Strainer Element

143763541
S903-164-67: RNCC: 3 | RNVC: 2
S90316467: RNCC: 5 | RNVC: 2

30 Mar 1982

4730-14-403-5186
Raccord Hydrau Bloc

144035186
10624-04-00: RNCC: 3 | RNVC: 2
10624-004-00: RNCC: 5 | RNVC: 2

21 Aug 1985

4730-14-334-2518
Tube Tee

143342518
GSM163-017F15: RNCC: 3 | RNVC: 2
GSM163-17F15: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-564-0094
Hose Coupling

145640094
6.388-458.0: RNCC: 3 | RNVC: 2

1 Apr 2010

4730-14-492-3178
Tube To Boss Straight Adapter

144923178
0870172900: RNCC: 3 | RNVC: 2
F300 0T 007 3734: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-369-9383
Tube To Boss Straight Adapter

143699383
004314005P: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-471-3177
Swivel Flange To Hose Connector

144713177
1049K1000A: RNCC: 3 | RNVC: 2

23 Aug 1994

4730-14-518-3432
Tube Tee

145183432
HTEXX000016: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-500-7430
Tube Tee

145007430
E64209009001: RNCC: 3 | RNVC: 2
F300 0T 024 7627: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-346-9679
Tube To Boss Straight Adapter

143469679
C63358: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-502-7325
Lubrication Fitting

145027325
271287: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-418-0772
Fluid Pressure Line Multiple Connector

144180772
2209: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-438-5196
Hose Coupling Assembly

144385196
DA2C729002250: RNCC: 3 | RNVC: 2

21 Mar 1990

4730-14-406-1500
Fluid Passage Bolt

144061500
K102281: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-324-6568
Lubrication Fitting

143246568
4257: RNCC: 3 | RNVC: 9

1 Jan 1975

4730-14-296-1072
Fluid Pressure Line Multiple Connector

142961072
3022951: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-440-4184
Tube To Boss Straight Adapter

144404184
A88931: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-561-1428
Tube To Boss Elbow

145611428
EQA 18: RNCC: 3 | RNVC: 2
02101329: RNCC: 5 | RNVC: 2

19 Jun 2009

4730-14-334-6462

4730-14-210-8091
Raccord Orientable

142108091
509-8NN: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-362-1333

4730-14-550-7308
Quick Disconnect Coupling Half

145507308
RMI16,1819/JV: RNCC: 3 | RNVC: 2
5010631415: RNCC: 5 | RNVC: 2

10 Jul 2006

4730-14-407-4281
Tube To Boss Straight Adapter

144074281
13-25-21-27: RNCC: 3 | RNVC: 2
UFA25X20-27N: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-368-8817
Pipe Fitting Assortment

143688817
Q1-5G30SEQUIPE: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-415-4918
Tube To Boss Straight Adapter

144154918
P4-12-25-30X200: RNCC: 3 | RNVC: 2
EMDAS00295: RNCC: 5 | RNVC: 2

18 May 1987

4730-14-332-0550
Tube Tee

143320550
160-10274-21: RNCC: 3 | RNVC: 2

19 Apr 2000

4730-14-498-3215
Tube To Boss Straight Adapter

144983215
UML16 1-2BSPCNU: RNCC: 3 | RNVC: 2
91952761: RNCC: 3 | RNVC: 2
F300 0T 004 7896: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-489-3473
Threaded Tube Fitting Plug

144893473
853-700-955-0: RNCC: 3 | RNVC: 2

9 Jul 1997

4730-14-365-2340
Tube To Boss Straight Adapter

143652340
303-993-101-0: RNCC: 3 | RNVC: 2

19 Sep 1980

4730-14-221-2181
Raccord A Joint Cou

142212181
GSM1297FE6-1TABLEAU2: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-566-9619
Sediment Strainer

145669619
149B 3281: RNCC: 3 | RNVC: 2

21 Jan 2011

4730-14-417-7880
Fluid Pressure Line Multiple Connector

144177880
BJIISO12X16-150: RNCC: 3 | RNVC: 9

22 Jul 1987

4730-14-031-0641
Tube To Boss Straight Adapter

140310641
9105252851: RNCC: 3 | RNVC: 2
9405252858: RNCC: 5 | RNVC: 2
VDP4616: RNCC: 5 | RNVC: 2
A2-25-21-27-51: RNCC: 5 | RNVC: 9

14 Jun 1980

4730-14-501-3228
Tube To Boss Straight Adapter

145013228
95637680: RNCC: 3 | RNVC: 2
F300 0T 025 3640: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-481-2767
Quick-Disconnect Nipple

144812767
21315: RNCC: 3 | RNVC: 2

25 Apr 1996

4730-14-504-7148
Tube To Boss Straight Adapter

145047148
455554V: RNCC: 3 | RNVC: 2
5001833672: RNCC: 3 | RNVC: 2

27 Feb 1998

4730-14-401-0302
Tube To Gas Fitting Straight Adapter

144010302
01051018: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-441-1058
Fluid Pressure Line Multiple Connector

144411058
20189203: RNCC: 3 | RNVC: 2

22 Aug 1990

4730-14-502-7757
Raccord

145027757
6V8638: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-344-7497

4730-14-219-8937
Bouchon Filete

142198937
0948391448: RNCC: 3 | RNVC: 2
0948391448: RNCC: 5 | RNVC: 9
948391448: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-569-5498
Hose Clamp

145695498
EN4234M027HRA: RNCC: 2 | RNVC: 2

26 Sep 2011

4730-14-234-8455
Presse Etoupe Speci

142348455
35122: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-355-5635
Tube To Boss Straight Adapter

143555635
12-40-40X49C0: RNCC: 3 | RNVC: 2
UMCA40X40-49N: RNCC: 3 | RNVC: 2
4A40-40-49C0: RNCC: 3 | RNVC: 2
MC40-49: RNCC: 5 | RNVC: 9

19 Mar 1979

4730-14-379-0639
Fluid Passage Bolt

143790639
078-12-100: RNCC: 3 | RNVC: 2

6 Sep 1982

4730-14-453-3966
Sediment Strainer Element

144533966
160-112AC5X26: RNCC: 3 | RNVC: 2

19 Feb 1992

4730-14-495-3836
Tube To Boss Straight Adapter

144953836
NO PRIMARY REF14-495-3836: RNCC: 3 | RNVC: 2
G32375-97: RNCC: 5 | RNVC: 9
F300 0T 019 1748: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-423-4090
Pipe Flange

144234090
UA50088006PN16-11ADN250: RNCC: 2 | RNVC: 2
4730JGDN250: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-564-4226
Fluid Flow Restrictor

145644226
332A72-0173-20: RNCC: 3 | RNVC: 2

28 Apr 2010

4730-14-498-3052
Tube To Boss Straight Adapter

144983052
PAA58-42-002-01: RNCC: 3 | RNVC: 2
20584200201: RNCC: 3 | RNVC: 2
91952488: RNCC: 3 | RNVC: 2
F300 0T 004 7679: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-395-3181
Pipe Flange

143953181
CAA007-88,9FEMELLE: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-375-9335
Tube To Boss Straight Adapter

143759335
UMCA20X20-27N: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-309-2276
Self-Sealing Coupling Half

143092276
9949451A: RNCC: 3 | RNVC: 2
TAH355S4-718-8D: RNCC: 5 | RNVC: 2
9-94-94-51A: RNCC: 5 | RNVC: 9
9949451: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-333-5321
3 Orif Distributeur

143335321
NO PRIMARY REF14-333-5321: RNCC: 3 | RNVC: 2
PA1D08-3P421-30: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-389-4542
Fluid Passage Bolt

143894542
365A54-1048-20: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-353-1184
Tube To Boss Straight Adapter

143531184
RC55-47: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-475-9751
Embout Bride Emboit

144759751
MAT171-1982F18: RNCC: 3 | RNVC: 2

16 May 1995

4730-14-490-3902
Tube Tee

144903902
NO PRIMARY REF14-490-3902: RNCC: 3 | RNVC: 2
NNP5306848429060: RNCC: 5 | RNVC: 9

24 Sep 1997

4730-14-498-7313
Tube To Boss Straight Adapter

144987313
NO PRIMARY REF14-498-7313: RNCC: 3 | RNVC: 2
121005163: RNCC: 5 | RNVC: 9
12-10-05-163: RNCC: 5 | RNVC: 9
F300 0T 008 2261: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-556-6362
Exhaust-Intake Pneumatic Muffler

145566362
0675 00 10: RNCC: 3 | RNVC: 2
0675.00.10: RNCC: 5 | RNVC: 2
06750010: RNCC: 5 | RNVC: 2

29 Mar 2008

4730-14-360-9397

4730-14-513-7185
Tube Union

145137185
4HMTXS: RNCC: 3 | RNVC: 2
4730700038: RNCC: 5 | RNVC: 2

7 Apr 1999

4730-14-290-1697

4730-14-334-2640

4730-14-573-2192
Hose Coupling

145732192
222EB057: RNCC: 3 | RNVC: 2
A231004000651: RNCC: 5 | RNVC: 2

24 Sep 2012

4730-14-342-2199

4730-14-576-7531
Hose Nipple

145767531
RA.12.18.18: RNCC: 3 | RNVC: 2

10 Jul 2013

4730-14-276-6624
Lubrication Fitting

142766624
9212037: RNCC: 3 | RNVC: 2
G23-10-100: RNCC: 5 | RNVC: 2
G23BIS10-100: RNCC: 5 | RNVC: 2
9-21-20-37: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-415-4856
Tube To Boss Straight Adapter

144154856
13-40-40-49NU: RNCC: 3 | RNVC: 2
UFA40X40-49NNU: RNCC: 3 | RNVC: 2
6A40-40-49NU: RNCC: 3 | RNVC: 2
13-40-4049NU: RNCC: 5 | RNVC: 2

18 May 1987

4730-14-249-4174
Raccord Special

142494174
66-07B: RNCC: 3 | RNVC: 2
6607B: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-442-0400
Tube Coupling

144420400
332A97-5200-12: RNCC: 3 | RNVC: 2

26 Sep 1990

4730-14-268-1165
Pipe Flange

142681165
6784-1CH20-14: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-498-3202
Tube To Boss Straight Adapter

144983202
UMA12 3-8BSPC: RNCC: 3 | RNVC: 2
91952743: RNCC: 3 | RNVC: 2
F300 0T 004 7879: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-404-8887
Raccord Boitier

144048887
366A72-1109-0001: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-334-2456
Tube Tee

143342456
GSM163-004BF20: RNCC: 3 | RNVC: 2
GSM163-04BF20: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-443-6964
Fluid Flow Restrictor

144436964
B14DC1070-026: RNCC: 3 | RNVC: 2
B14DC1070-026: RNCC: 5 | RNVC: 2
B14DC1070-026: RNCC: 5 | RNVC: 9

5 Dec 1990

4730-14-387-8606
Collet Pour Tube

143878606
NO PRIMARY REF14-387-8606: RNCC: 3 | RNVC: 2
0026-142DN175: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-370-2493
Tube To Boss Straight Adapter

143702493
303-192-001-0: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-335-7129

4730-14-262-1532

4730-14-565-9745
Hose Clamp

145659745
TORRO16-27/9C7W1: RNCC: 3 | RNVC: 2
726659: RNCC: 5 | RNVC: 2
1267565021: RNCC: 5 | RNVC: 2

7 Oct 2010

4730-14-484-2705
Anchor And Reinforcement Pipe Clamp

144842705
3180S73-13-372-01: RNCC: 3 | RNVC: 2
3180731337201: RNCC: 5 | RNVC: 2

31 Oct 1996

4730-14-493-0788
Union

144930788
NO PRIMARY REF14-493-0788: RNCC: 3 | RNVC: 2
567933: RNCC: 5 | RNVC: 9
F300 0T 009 9587: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-423-4168
Pipe Flange

144234168
UA50088006PN50-11D1DN125: RNCC: 2 | RNVC: 2
4730HCPN50DN12511D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-233-3889
Quick Disconnect Coupling Assembly

142333889
SDS0-40BAG: RNCC: 3 | RNVC: 2
SDS02-38-40Z: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-501-9743
Hydraulic System Accessories Manifold

145019743
SSNGA1S105-A: RNCC: 3 | RNVC: 2
312224-B: RNCC: 3 | RNVC: 2

19 Nov 1997

4730-14-449-0074
Hose To Boss Straight Adapter

144490074
FTXS20-1: RNCC: 3 | RNVC: 2
91712756: RNCC: 5 | RNVC: 2

24 Jul 1991

4730-14-562-6350
Tube Coupling Assembly

145626350
7-1000-699: RNCC: 3 | RNVC: 2

10 Nov 2009

4730-14-422-9223
Bulkhead Hose Connector

144229223
S4710X0002-7034: RNCC: 2 | RNVC: 2
F0532S4710X0002-7034: RNCC: 3 | RNVC: 2
LW101-DW5279N: RNCC: 3 | RNVC: 2

24 Mar 1988

4730-14-525-1489
Tube Coupling

145251489
NO PRIMARY REF14-525-1489: RNCC: 3 | RNVC: 2
109821: RNCC: 5 | RNVC: 9

23 May 2001

4730-14-354-2165

4730-14-426-7416
Tube Tee

144267416
4730HEING021,3X3,6-17,2X2,3: RNCC: 2 | RNVC: 2

20 Sep 1988

4730-14-367-7697
Tube Coupling

143677697
303-153-001-0: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-461-3872
Quick Disconnect Reducer

144613872
MAT850-3002: RNCC: 3 | RNVC: 2

10 Mar 1993

4730-14-325-0727
Diaphragme Tuyauter

143250727
F521-04-04: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-346-4180
Prise De Pression

143464180
MRA04-1251FB: RNCC: 3 | RNVC: 2
MRA04-1251: RNCC: 3 | RNVC: 2
MR4-1251: RNCC: 5 | RNVC: 2
MRA04-1251-FB: RNCC: 5 | RNVC: 2

12 Dec 1977

4730-14-362-1009
Pipe Flange

143621009
GSM162-011F22REPK: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-458-3580
Tube To Boss Straight Adapter

144583580
LN329-017REP87: RNCC: 3 | RNVC: 2
LN329-017F16DE33,7G1"EQ: RNCC: 5 | RNVC: 2

20 Oct 1992

4730-14-340-7751
Tube To Boss Straight Adapter

143407751
GSM164-041F14: RNCC: 3 | RNVC: 2
GSM164-05F61: RNCC: 5 | RNVC: 2

14 Feb 1977

4730-14-325-3726
Tube To Boss Straight Adapter

143253726
102022-03100: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-277-6538
Pipe Flange

142776538
6784-1CB8: RNCC: 2 | RNVC: 2
MEC11191: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-442-0966
Tube To Boss Straight Adapter

144420966
AS3/8-24: RNCC: 3 | RNVC: 2
503069: RNCC: 5 | RNVC: 9

1 Oct 1990

4730-14-373-7714
Quick Disconnect Coupling Half

143737714
1080133: RNCC: 3 | RNVC: 2
10-801-33: RNCC: 5 | RNVC: 2
1080.133: RNCC: 5 | RNVC: 9

13 Nov 1981

4730-14-330-1546
Tube To Boss Straight Adapter

143301546
A1-75380: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-426-7403
Tube Tee

144267403
4730HEING021,3X2,6-10,2X1,6: RNCC: 2 | RNVC: 2

20 Sep 1988

4730-14-301-0130
Fluid Pressure Line Multiple Connector

143010130
121E71-130-06-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-552-3306
Tube Coupling

145523306
MJ 1 1-16XMG1-2R: RNCC: 3 | RNVC: 2

13 Dec 2006

4730-14-299-2798

4730-14-317-0034
Corps De Bride

143170034
AS34TQ102FREP13: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-325-1176

4730-14-220-5597

4730-14-562-5215
Tube To Boss Straight Adapter

145625215
36360410: RNCC: 3 | RNVC: 2
FS0001680: RNCC: 6 | RNVC: 9

2 Nov 2009

4730-14-247-1696

4730-14-237-3559
Mamelon

142373559
AML1203: RNCC: 3 | RNVC: 2
012003: RNCC: 5 | RNVC: 2
012003: RNCC: 6 | RNVC: 9

1 Jan 1967

4730-14-221-3014
Bride Presseetoupe

142213014
MBO: RNCC: 3 | RNVC: 2
23245: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-437-4474
Bulkhead Hose Connector

144374474
332A61-1238-00: RNCC: 3 | RNVC: 2

31 Jan 1990

4730-14-429-2162
Fluid Pressure Line Multiple Connector

144292162
6T10-6SMKD01: RNCC: 3 | RNVC: 2

11 Jan 1989

4730-14-489-6550
Tube Fitting Socket Welded Ferrule

144896550
330A55-0611-26: RNCC: 3 | RNVC: 2

6 Aug 1997

4730-14-394-5800
Self-Sealing Coupling Assembly

143945800
RBE8-71020D-HP: RNCC: 3 | RNVC: 2

28 Aug 1984

4730-14-361-5752
Tube To Boss Straight Adapter

143615752
Q1-5204JC14-15X21CYL: RNCC: 3 | RNVC: 2
ORK14X15-21N: RNCC: 3 | RNVC: 2

24 Jan 1980

4730-14-271-8260
Tube Tee

142718260
NO PRIMARY REF14-271-8260: RNCC: 3 | RNVC: 2
TE30-16X16X16: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-490-2884
Tube Coupling

144902884
J05085-04-0400P014: RNCC: 3 | RNVC: 2

24 Sep 1997

4730-14-263-0248
Sediment Strainer Element

142630248
FL1101: RNCC: 3 | RNVC: 2
AV1289-18: RNCC: 5 | RNVC: 9
85-694-9253: RNCC: 6 | RNVC: 9

1 Jan 1970

4730-14-527-0938
Raccord Inverseur

145270938
2-538233-3: RNCC: 3 | RNVC: 2
2-538233-3: RNCC: 5 | RNVC: 9

2 Oct 2001

4730-14-560-0288
Quick Disconnect Coupling Half

145600288
MPX19.7105/JV: RNCC: 3 | RNVC: 2

16 Mar 2009

4730-14-568-9710
Tube To Hose Straight Adapter

145689710
AMS2225: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-418-6831
Fluid Pressure Line Multiple Connector

144186831
L43311-12ADL: RNCC: 2 | RNVC: 2
43311AD12L: RNCC: 5 | RNVC: 2

9 Sep 1987

4730-14-306-2789
Fluid Pressure Line Multiple Connector

143062789
NO PRIMARY REF14-306-2789: RNCC: 3 | RNVC: 2
550320: RNCC: 5 | RNVC: 2
2550320: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-297-8124
Sediment Strainer Element

142978124
E54503REP42-43: RNCC: 3 | RNVC: 9

1 Jan 1973

4730-14-355-5602
Tube To Boss Straight Adapter

143555602
G1DM21-15X21CYL: RNCC: 3 | RNVC: 2
AAG21X15-21N: RNCC: 3 | RNVC: 2
5BAG21-15-21CYL: RNCC: 3 | RNVC: 2

19 Mar 1979

4730-14-456-8968
Tube Coupling Nut Assembly

144568968
DV145A010-103: RNCC: 3 | RNVC: 9
1009664E00: RNCC: 5 | RNVC: 2

29 Jul 1992

4730-14-410-3004
Flange To Boss Elbow

144103004
332A58-5501-2001: RNCC: 3 | RNVC: 2

18 Jun 1986

4730-14-423-4519
Pipe Flange

144234519
UA50088006PN100-11B2SDN80: RNCC: 2 | RNVC: 2
4730HCPN100DN08011B2S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-292-5084
Fluid Pressure Line Multiple Connector

142925084
F794-007: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-362-1001
Pipe Flange

143621001
GSM162-011F22REPC: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-423-4738
Pipe Flange

144234738
UA50088006PN50-11LSFDN65: RNCC: 2 | RNVC: 2
4730HCPN50DN06511LSF: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-447-5290
Gicleur

144475290
223515: RNCC: 3 | RNVC: 2

28 May 1991

4730-14-556-9081
Tube Reducer

145569081
JD 10-8 NOIR: RNCC: 3 | RNVC: 2
0031619: RNCC: 5 | RNVC: 2

21 Apr 2008

4730-14-238-9365
Tube To Boss Straight Adapter

142389365
G1204-17-15-21: RNCC: 3 | RNVC: 2
5927188: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-498-0768
Self-Sealing Coupling Assembly

144980768
H0200202100NW0A: RNCC: 3 | RNVC: 2
6792706820: RNCC: 5 | RNVC: 2
6792706820: RNCC: 5 | RNVC: 9
F300 0T 002 5014: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-526-6526
Fluid Passage Bolt

145266526
048100053: RNCC: 3 | RNVC: 2

14 Aug 2001

4730-14-470-5361
Tube To Boss Straight Adapter

144705361
153.24H: RNCC: 3 | RNVC: 2
89486723: RNCC: 5 | RNVC: 2

22 Jun 1994

4730-14-384-4939
Tube To Boss Straight Adapter

143844939
0000241430: RNCC: 3 | RNVC: 2

4 May 1983

4730-14-365-1518
Pipe Flange

143651518
969870: RNCC: 3 | RNVC: 2
969870: RNCC: 5 | RNVC: 9

2 Sep 1980

4730-14-367-0290

4730-14-260-9316

4730-14-268-0741

4730-14-375-8208
Tube To Boss Straight Adapter

143758208
16558750: RNCC: 3 | RNVC: 2
16558750: RNCC: 5 | RNVC: 9

30 Mar 1982

4730-14-368-1625

4730-14-367-7370

4730-14-239-0915

4730-14-556-9855
Hose Coupling

145569855
001010: RNCC: 3 | RNVC: 2

25 Apr 2008

4730-14-304-9345

4730-14-366-8894
Adaptateurs Remplis

143668894
1012-161: RNCC: 3 | RNVC: 2

11 Dec 1980

4730-14-446-4807
Fluid Passage Bolt

144464807
0000280970: RNCC: 3 | RNVC: 2
85-694-4528: RNCC: 6 | RNVC: 9

20 Mar 1991

4730-14-325-3728
Tube To Boss Straight Adapter

143253728
102029-03100: RNCC: 3 | RNVC: 2
GSM524-038F5: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-431-7448
Pipe Flange

144317448
E29203-01B-PN16DN65Z2CND17-12: RNCC: 2 | RNVC: 2
4730HADN065: RNCC: 5 | RNVC: 2

10 May 1989

4730-14-265-1597
Pipe Flange

142651597
553-000MA018DN100DE108: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-465-9787
Pipeline Flexible Spacer

144659787
DILATOFLEX-NTMH-DN80PN16: RNCC: 3 | RNVC: 2

27 Oct 1993

4730-14-505-5677
Quick Disconnect Coupling Half

145055677
RBE037904-0DIC: RNCC: 3 | RNVC: 2

25 Mar 1998

4730-14-455-6292
Tube To Boss Straight Adapter

144556292
RCN01-16-17: RNCC: 3 | RNVC: 2

2 Jun 1992

4730-14-273-5397
Pipe Flange

142735397
7062TD1F1F108-3-5UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-338-0798
Tube Coupling Assembly

143380798
0-3601S50A: RNCC: 3 | RNVC: 2
0-3601S50A: RNCC: 5 | RNVC: 9
85-688-9385: RNCC: 6 | RNVC: 9

6 Nov 1976

4730-14-342-1566
Bulkhead Hose Connector

143421566
EA1M524-032: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-528-3494
Fluid Pressure Line Multiple Connector

145283494
C04/4813: RNCC: 3 | RNVC: 2

23 Jan 2002

4730-14-307-1013

4730-14-373-0580
Tube Union

143730580
MAT014-01-00-1: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-376-7606
Fluid Passage Bolt

143767606
52S1203103: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-333-5196
Barillet A 4 Voies

143335196
GSM163-016F26: RNCC: 3 | RNVC: 2
GSM163-16F26: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-533-4551
Self-Sealing Coupling Half

145334551
T947A10T0017: RNCC: 1 | RNVC: 2
RF5740-0-00: RNCC: 3 | RNVC: 2

5 Feb 2003

4730-14-442-7597
Tube To Boss Straight Adapter

144427597
4DS8/1/4KNU: RNCC: 3 | RNVC: 2
568220: RNCC: 5 | RNVC: 2
4DS8/8-13CNU: RNCC: 5 | RNVC: 2
568220: RNCC: 5 | RNVC: 9

31 Oct 1990

4730-14-447-1515
Tube Tee

144471515
GMA3-16PS: RNCC: 3 | RNVC: 2

3 May 1991

4730-14-267-7835
Quick Disconnect Coupling Half

142677835
9959502: RNCC: 3 | RNVC: 2
VDPM02946: RNCC: 5 | RNVC: 2
5602810: RNCC: 5 | RNVC: 2
VDP5066-1: RNCC: 5 | RNVC: 2
9959502: RNCC: 5 | RNVC: 9
5602-8-10: RNCC: 5 | RNVC: 9
9-95-95-02: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-539-3816
Bulkhead Hose Connector

145393816
0-384-02-023-0: RNCC: 3 | RNVC: 2

12 Jan 2004

4730-14-357-7856
Pipe Flange

143577856
1-398-137: RNCC: 3 | RNVC: 2

20 Jul 1979

4730-14-259-2770
Self-Sealing Coupling Half

142592770
SC07508AU2047: RNCC: 3 | RNVC: 2
S0F75-0-1-2: RNCC: 5 | RNVC: 2
S0F750 1-2: RNCC: 5 | RNVC: 2
908713: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-484-3557
Tube Coupling

144843557
2.28076: RNCC: 3 | RNVC: 2
Q88.GA10-1-2BSPTS: RNCC: 5 | RNVC: 2
91357920: RNCC: 5 | RNVC: 2
91357920: RNCC: 5 | RNVC: 2

14 Nov 1996

4730-14-404-2987
Raccord D'adaptatio

144042987
1822-01-56: RNCC: 3 | RNVC: 2

23 Sep 1985

4730-14-267-7766
Fluid Passage Bolt

142677766
99641144007: RNCC: 3 | RNVC: 2
24053948800: RNCC: 5 | RNVC: 2
99-641-144-007: RNCC: 5 | RNVC: 2
240539488: RNCC: 5 | RNVC: 9
53J9488: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-334-2536
Tube Tee

143342536
GSM163-017F34: RNCC: 3 | RNVC: 2
GSM163-17F34: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-504-0621
Tube Coupling

145040621
NNP4730878750167: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-306-7681
Bride A Zinc

143067681
000MA0781F5REP1DN20: RNCC: 3 | RNVC: 2
000MA781F5REP1DN20: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-415-8786
Pipe Expansion Joint

144158786
75442811200: RNCC: 3 | RNVC: 2
754428112: RNCC: 5 | RNVC: 9

21 May 1987

4730-14-541-9379
Tube To Boss Straight Adapter

145419379
501099001012A: RNCC: 3 | RNVC: 9

2 Jul 2004

4730-14-456-3302
Tuyauterie Equipee

144563302
DLT211607: RNCC: 3 | RNVC: 2

30 Jun 1992

4730-14-339-7232

4730-14-572-3653
Pipe True Wye

145723653
M2821346500000: RNCC: 3 | RNVC: 2

28 Jun 2012

4730-14-576-3764
Tube Nipple

145763764
10620331: RNCC: 3 | RNVC: 1

14 Jun 2013

4730-14-576-3732
Tube Elbow

145763732
10620329: RNCC: 3 | RNVC: 1

13 Jun 2013

4730-14-576-8028
Hose Tee

145768028
PE65419E16: RNCC: 3 | RNVC: 2

16 Jul 2013

4730-14-438-2260
Tube To Boss Straight Adapter

144382260
A82848: RNCC: 3 | RNVC: 2
85-694-1041: RNCC: 6 | RNVC: 9

7 Mar 1990

4730-14-574-4844
Fluid Flow Restrictor

145744844
MY20723-008: RNCC: 3 | RNVC: 2

23 Jan 2013

4730-14-269-1951
Pipe Flange

142691951
7066CE1F108: RNCC: 2 | RNVC: 2
4730BC-108F: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-434-3852
Hydraulic System Accessories Manifold

144343852
332A75-2401-02: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-458-3558
Tube Tee

144583558
LN329-017REP45: RNCC: 3 | RNVC: 2
LN329-017F19DN33,7: RNCC: 5 | RNVC: 2

20 Oct 1992

4730-14-362-1245
Pipe Flange

143621245
U1198F4-108Z2CND17-13: RNCC: 2 | RNVC: 2

20 Feb 1980

4730-14-465-7409
Tube To Boss Straight Adapter

144657409
MAT145-02-01: RNCC: 3 | RNVC: 2

14 Oct 1993

4730-14-556-2851
Fluid Orifice Plate

145562851
305-19-102: RNCC: 3 | RNVC: 2

20 Feb 2008

4730-14-275-0248
Tube To Boss Straight Adapter

142750248
9105101466: RNCC: 3 | RNVC: 2
CA2-10-8-13BR: RNCC: 5 | RNVC: 9
CA2-10-8X13NPTS: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-258-3558

4730-14-533-2761
Tube To Boss Straight Adapter

145332761
X102881: RNCC: 3 | RNVC: 2

29 Jan 2003

4730-14-553-0427
Pipe Flange

145530427
FHS63CF: RNCC: 3 | RNVC: 2
437200: RNCC: 5 | RNVC: 2
FHS63CF: RNCC: 5 | RNVC: 9

26 Feb 2007

4730-14-468-6800
Quick Disconnect Plug

144686800
A87268: RNCC: 3 | RNVC: 2

16 Mar 1994

4730-14-456-6474
Tube Tee

144566474
LN326064F8REP10: RNCC: 3 | RNVC: 2

16 Jul 1992

4730-14-331-7939
Tube Fitting Brazing Ferrule

143317939
579-706-004-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-206-2814
Tube To Boss Straight Adapter

142062814
17-5-1667: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-332-8315
Tube To Boss Straight Adapter

143328315
G12-13 3-8BGS: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-566-6846
Tube Coupling

145666846
12723: RNCC: 3 | RNVC: 2
VSES22001: RNCC: 5 | RNVC: 2
E 15 L: RNCC: 5 | RNVC: 2

7 Dec 2010

4730-14-226-3862
Raccord Special

142263862
R4A742-002: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-040-5247
Raccord Equipe

140405247
M5BA521-25: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-561-6676
Hose Clamp

145616676
FX8/10-16: RNCC: 3 | RNVC: 2
8022695C00: RNCC: 5 | RNVC: 2
FX 8 010-016: RNCC: 5 | RNVC: 2
FX8/10-16: RNCC: 5 | RNVC: 2
FX8/10-16: RNCC: 5 | RNVC: 9

18 Aug 2009

4730-14-270-2334
Prise De Pression

142702334
NO PRIMARY REF14-270-2334: RNCC: 3 | RNVC: 2
65111C: RNCC: 5 | RNVC: 2
65111: RNCC: 5 | RNVC: 9
65111C: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-333-8724

4730-14-303-5731
Fluid Pressure Line Multiple Connector

143035731
A77128-1: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-489-3798
Tube-Pipe Fitting Kit

144893798
KRCY2-1/4: RNCC: 3 | RNVC: 2

16 Jul 1997

4730-14-429-8268
Pipe Flange

144298268
2500193: RNCC: 3 | RNVC: 2

14 Feb 1989

4730-14-537-1132
Tube To Boss Straight Adapter

145371132
35-841655: RNCC: 3 | RNVC: 2

1 Oct 2003

4730-14-368-8819
Tube To Boss Straight Adapter

143688819
Q1-5GE14SR15-21CYLEQUIPE: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-275-0266
Tube Fitting Clinch Sleeve

142750266
U1134F12-20: RNCC: 2 | RNVC: 2
9124200250: RNCC: 5 | RNVC: 2
BCH20: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-431-0570
Quick Disconnect Coupling Half

144310570
RBE03-1804: RNCC: 3 | RNVC: 2
8009: RNCC: 3 | RNVC: 2
8009: RNCC: 5 | RNVC: 2

3 Apr 1989

4730-14-438-5870
Tube To Boss Straight Adapter

144385870
LL130-CK16S: RNCC: 3 | RNVC: 2
8176160066: RNCC: 5 | RNVC: 2

27 Mar 1990

4730-14-374-3543
Tube To Boss Straight Adapter

143743543
N67110: RNCC: 3 | RNVC: 2
85-691-5142: RNCC: 6 | RNVC: 9

8 Dec 1981

4730-14-568-0543
Tube To Boss Straight Adapter

145680543
GE10SR1/2EDOMDCF: RNCC: 3 | RNVC: 2
A231004000993: RNCC: 5 | RNVC: 2

5 May 2011

4730-14-406-8564
Lubrication Fitting

144068564
N0510-18: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-395-3180
Pipe Flange

143953180
CAA007-76,1FEMELLE: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-213-7986
Fluid Passage Bolt

142137986
115188: RNCC: 3 | RNVC: 2
M115188: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-446-8064
Fluid Pressure Line Multiple Connector

144468064
6F300 0T 013 0852: RNCC: 3 | RNVC: 2
WH012PLRA3C: RNCC: 3 | RNVC: 2
WH012PLRA3C: RNCC: 3 | RNVC: 9
4730900020: RNCC: 5 | RNVC: 2
WH12LRA3C: RNCC: 5 | RNVC: 9
WH12PLR: RNCC: 5 | RNVC: 9
F300 0T 012 1605: RNCC: 6 | RNVC: 9

16 Apr 1991

4730-14-400-4238
Pipeline Flexible Spacer

144004238
KLEDIL25CC: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-375-7759
Tube-Hose Fitting Compression Sleeve

143757759
18389: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-376-7608
Fluid Passage Bolt

143767608
52S1604601: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-536-0464
Tube To Hose Straight Adapter

145360464
PE65401TE10: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-224-6327
Quick Disconnect Coupling Half

142246327
E29572A100BZ: RNCC: 2 | RNVC: 2

1 Jan 1966

4730-14-504-5160
Tube To Boss Straight Adapter

145045160
5365.030: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-032-2853
Tube To Boss Straight Adapter

140322853
K7809CA01EREP11: RNCC: 3 | RNVC: 2

10 Jun 1982

4730-14-365-3009
Quick Disconnect Coupling Assembly

143653009
SJS32GDB: RNCC: 3 | RNVC: 2

19 Sep 1980

4730-14-367-7164
Quick Disconnect Coupling Half

143677164
S11686DB27: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-320-9531
Tube To Boss Straight Adapter

143209531
440G8M: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-430-6435
Bulkhead Hose Connector

144306435
PM1A534100001: RNCC: 3 | RNVC: 2
PM1A534100001: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-536-0478
Tube To Hose Straight Adapter

145360478
PE65409D10: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-269-2064

4730-14-559-4259
Hose Elbow

145594259
P733135: RNCC: 3 | RNVC: 2

12 Jan 2009

4730-14-434-7127
Adaptateur Bride

144347127
BN329515D2DN250AC: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-295-0765

4730-14-390-4372

4730-14-031-0302

4730-14-294-4013
Fluid Pressure Line Multiple Connector

142944013
121E77-100-39-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-449-5543
Tube Union

144495543
RACCORD IMP G1A EM L33,7: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-561-7520
Hose To Grooved Clamp Coupling Straight Adapter

145617520
GUI 1004-3/8X10: RNCC: 3 | RNVC: 2

2 Sep 2009

4730-14-387-1705
Self-Sealing Coupling Half

143871705
SF07512AU2070: RNCC: 3 | RNVC: 2
S0F75-03-4-2070: RNCC: 5 | RNVC: 2
S0F750 3/4-2070: RNCC: 5 | RNVC: 2
S0F75-0-3-4-2070: RNCC: 5 | RNVC: 2

24 Aug 1983

4730-14-303-1081
Swivel Retaining Pipe Flange

143031081
U1198-57: RNCC: 2 | RNVC: 2
4730BK-57: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-317-9898
Jeu Demi-Manchons

143179898
L32.311.GB.06: RNCC: 3 | RNVC: 2
L32GB31106: RNCC: 5 | RNVC: 2
L32-311GB06: RNCC: 5 | RNVC: 2
L32GB311-06: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-455-6430
Quick Disconnect Coupling Half

144556430
23RE-LN320001DN65REP4TYPEA2: RNCC: 3 | RNVC: 2
LN320001DN65REP4TYPEA2: RNCC: 5 | RNVC: 2
RAB9553: RNCC: 5 | RNVC: 2

3 Jun 1992

4730-14-429-4548
Hose To Boss Straight Adapter

144294548
755-1032: RNCC: 3 | RNVC: 2

24 Jan 1989

4730-14-317-9904
Jeu Demi-Manchons

143179904
L63.316.GB.06: RNCC: 3 | RNVC: 2
L63-316GB06: RNCC: 5 | RNVC: 2
L63GB316-06: RNCC: 5 | RNVC: 2
L63GB31606: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-266-0470
Tube To Boss Straight Adapter

142660470
9940706: RNCC: 3 | RNVC: 2
4722-12: RNCC: 5 | RNVC: 2
4722-12-12S: RNCC: 5 | RNVC: 2
9940706: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-438-7404
Pipe Joint Welding Ring

144387404
LN324-079REP06: RNCC: 3 | RNVC: 2
LN324-079F7REP06: RNCC: 5 | RNVC: 2

3 Apr 1990

4730-14-328-9588
Tube Tee

143289588
R1-5TR36X10X36NNNU: RNCC: 3 | RNVC: 2
GSM164-012F38: RNCC: 3 | RNVC: 2
TRK36X10X36NNU: RNCC: 3 | RNVC: 2
Q1-5TR36X10X36NNNU: RNCC: 3 | RNVC: 2
10RCA36X10X36NU: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-432-6376
Tubulure

144326376
2-34743: RNCC: 3 | RNVC: 2

19 Jun 1989

4730-14-395-1719
Quick Disconnect Coupling Assembly

143951719
6018: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-494-5515
Tube To Boss Straight Adapter

144945515
643 449 201: RNCC: 3 | RNVC: 2
F300 0T 017 4694: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-359-9011
Bride Centrale Inte

143599011
2-23665: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-391-3485
Pipe Flange

143913485
64353280113PL44: RNCC: 3 | RNVC: 2

1 Mar 1984

Load More Results