What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 163 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 163 of 185

4730-14-320-0008

4730-14-567-8591
Pipe Elbow

145678591
1500920002600: RNCC: 3 | RNVC: 2

18 Apr 2011

4730-14-488-4149
Tube To Boss Straight Adapter

144884149
47642-4: RNCC: 3 | RNVC: 2

7 May 1997

4730-14-304-3006
Fluid Pressure Line Multiple Connector

143043006
121E71-310-61-0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-427-6225
Tube To Boss Straight Adapter

144276225
G4BRAB8-1/2: RNCC: 3 | RNVC: 2
G4BRAB8-1/2: RNCC: 3 | RNVC: 9

27 Oct 1988

4730-14-502-4025
Tube To Boss Swivel Joint

145024025
8RM69-4/H0537: RNCC: 3 | RNVC: 2

12 Dec 1997

4730-14-557-0894
Pipeline Flexible Spacer

145570894
C52-13-60-01REP2: RNCC: 3 | RNVC: 2

7 May 2008

4730-14-398-5877
Tube Tee

143985877
GSM164-054F11: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-553-1353
Tube Tee

145531353
GMA3-06ZLCF: RNCC: 3 | RNVC: 2
437405: RNCC: 5 | RNVC: 2
GMA3-06ZLCF: RNCC: 5 | RNVC: 9

6 Mar 2007

4730-14-508-5715
Tube To Boss Straight Adapter

145085715
633209390154/D9165: RNCC: 3 | RNVC: 2
633209390154: RNCC: 5 | RNVC: 9

16 Sep 1998

4730-14-231-0851
Bride Speciale

142310851
NO PRIMARY REF14-231-0851: RNCC: 3 | RNVC: 2
17508: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-377-8634
Quick Disconnect Coupling Assembly

143778634
350AVF46: RNCC: 3 | RNVC: 2
85-692-1201: RNCC: 6 | RNVC: 9

10 Jun 1982

4730-14-493-6673
Fluid Flow Restrictor Unit

144936673
384922: RNCC: 3 | RNVC: 2
EPA21410-223: RNCC: 5 | RNVC: 1
384922-001: RNCC: 5 | RNVC: 9

8 Oct 1997

4730-14-305-8670
Tube To Boss Straight Adapter

143058670
Q1-52-35-39-200: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-415-5620
Tube Union

144155620
5A12-18X150S: RNCC: 3 | RNVC: 2
AT0019006: RNCC: 5 | RNVC: 2
5005030383: RNCC: 5 | RNVC: 2

18 May 1987

4730-14-509-0844
Flange To Tube Straight Adapter

145090844
K04B100-204: RNCC: 3 | RNVC: 2

21 Oct 1998

4730-14-424-3199
Quick Disconnect Coupling Half

144243199
RBE06-6101/IA/4,5: RNCC: 3 | RNVC: 2
RBE06-6101IA4-5: RNCC: 5 | RNVC: 2
91470684: RNCC: 5 | RNVC: 2

19 May 1988

4730-14-290-9481
Bulkhead Hose Connector

142909481
000MA1050F26REPPM36-1: RNCC: 3 | RNVC: 2
000MA022F41REPPM36-1: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-424-4117
Pipe Elbow Assembly

144244117
C3BRAB8-3/8: RNCC: 3 | RNVC: 2
C3BRAB8-3/8: RNCC: 3 | RNVC: 9
C3BRA38 3/8: RNCC: 5 | RNVC: 9

19 May 1988

4730-14-545-8865
Tube To Boss Straight Adapter

145458865
25167-8: RNCC: 3 | RNVC: 2

24 May 2005

4730-14-340-0889
Tube To Boss Straight Adapter

143400889
8-10-12XG1-2ACIER: RNCC: 3 | RNVC: 2
8-10-12XG1-2ACIER: RNCC: 3 | RNVC: 2

18 Jan 1977

4730-14-572-4688
Hydraulic Swivel Joint

145724688
7502500: RNCC: 3 | RNVC: 2
75025: RNCC: 5 | RNVC: 9

5 Jul 2012

4730-14-365-9771

4730-14-333-4030
Tube Coupling Assembly

143334030
0-3601H20A: RNCC: 3 | RNVC: 2
0-3601H20A: RNCC: 5 | RNVC: 9
85-688-9369: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-545-3662
Tube Coupling

145453662
2402-710-706-L C: RNCC: 3 | RNVC: 2

8 Apr 2005

4730-14-234-9569
Raccord En Croix Sp

142349569
A15039-1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-338-0788
Tube Coupling Assembly

143380788
0-3701S40X32A: RNCC: 3 | RNVC: 2
0-3701S40X32A: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-453-8379
Fluid Pressure Line Multiple Connector

144538379
A88562-1: RNCC: 3 | RNVC: 2

12 Mar 1992

4730-14-350-9204
Tube To Boss Straight Adapter

143509204
91011717: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-443-2103
Fluid Pressure Line Multiple Connector

144432103
1202013: RNCC: 3 | RNVC: 2

12 Nov 1990

4730-14-509-7128
Pipe Flange

145097128
0235651190: RNCC: 3 | RNVC: 2

28 Oct 1998

4730-14-311-2006
Fluid Passage Bolt

143112006
E13274: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-489-6026
Tube Coupling Assembly

144896026
10-508: RNCC: 3 | RNVC: 9

6 Aug 1997

4730-14-410-6460
Fluid Passage Bolt

144106460
401152: RNCC: 3 | RNVC: 2
BGE401152: RNCC: 5 | RNVC: 2

9 Jul 1986

4730-14-516-0533
Fluid Flow Restrictor

145160533
SIFLS1R001200F4AREP8A: RNCC: 3 | RNVC: 2

8 Sep 1999

4730-14-363-8712
Fluid Pressure Line Multiple Connector

143638712
190202: RNCC: 3 | RNVC: 2

7 Aug 1980

4730-14-362-7599
Bulkhead Hose Connector

143627599
891: RNCC: 3 | RNVC: 2
714724: RNCC: 5 | RNVC: 2
89296291: RNCC: 5 | RNVC: 2

19 Mar 1980

4730-14-494-5564
Tube Union

144945564
652 036 361: RNCC: 3 | RNVC: 2
F300 0T 017 4747: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-540-5950
Return Tube Bend

145405950
510706111: RNCC: 3 | RNVC: 2

7 Apr 2004

4730-14-208-9968

4730-14-341-2932

4730-14-246-2999

4730-14-203-3877
Lubrication Fitting

142033877
9203041: RNCC: 3 | RNVC: 2
9-20-30-41: RNCC: 5 | RNVC: 9
G30-06-100: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-14-275-0294
Tube To Boss Straight Adapter

142750294
9905141366: RNCC: 3 | RNVC: 2
CA2-14-8-13C0: RNCC: 5 | RNVC: 9
CA2-14-8X13BSPC0HP: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-457-8954
Tube Tee

144578954
4730JCING168,3X11-114,3X08,8: RNCC: 2 | RNVC: 2

26 Sep 1992

4730-14-391-6499
Quick Disconnect Coupling Half

143916499
RBE08-6102-4-5: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-561-7884
Tube Nipple

145617884
H1210710-242400: RNCC: 3 | RNVC: 2
21789: RNCC: 5 | RNVC: 2

7 Sep 2009

4730-14-282-3042
Raccord Double Male

142823042
NO PRIMARY REF14-282-3042: RNCC: 3 | RNVC: 2
242: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-278-0926

4730-14-241-5980

4730-14-535-5536
Vis Reglage Debit

145355536
462882: RNCC: 3 | RNVC: 2

3 Jun 2003

4730-14-430-6438
Raccord Buse

144306438
PM1A534100030: RNCC: 3 | RNVC: 2
PM1A534100030: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-564-5171
Tube Coupling

145645171
8938036300: RNCC: 3 | RNVC: 2
A231004000082: RNCC: 5 | RNVC: 2

4 May 2010

4730-14-417-6672
Corps De Raccord

144176672
GM90009-32: RNCC: 3 | RNVC: 2
GM90009-32: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-460-6016
Threaded Tube Fitting Plug

144606016
MAT006-03-01: RNCC: 3 | RNVC: 2

4 Feb 1993

4730-14-340-7749
Swivel Retaining Pipe Flange

143407749
MAT178-0119F14: RNCC: 3 | RNVC: 2
GSM772-001F20: RNCC: 5 | RNVC: 2
GSM772-01F20: RNCC: 5 | RNVC: 2

14 Feb 1977

4730-14-483-3171
Lubrication Fitting

144833171
332A07-43-046-71: RNCC: 3 | RNVC: 2

4 Sep 1996

4730-14-480-2014
Self-Sealing Coupling Assembly

144802014
RBE03-7806IC0: RNCC: 3 | RNVC: 2

28 Feb 1996

4730-14-333-5074
Sous-Ensemble Bride

143335074
GSM166-003F29: RNCC: 3 | RNVC: 2
GSM166-03F29: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-531-7475
Tube Coupling

145317475
20-52-254: RNCC: 3 | RNVC: 2
4071B31REP35-4: RNCC: 5 | RNVC: 2

12 Sep 2002

4730-14-367-8268
Tube Coupling

143678268
121E85-011-02-0: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-489-1823
Fluid-Emulsion Spray Nozzle

144891823
71251-3,6MM: RNCC: 3 | RNVC: 2
4400-22-A-F53-3,6MM: RNCC: 5 | RNVC: 2

2 Jul 1997

4730-14-520-0824
Tube Coupling Nut Assembly

145200824
KD E JET SDI 18V: RNCC: 3 | RNVC: 2
KDE-JET-SDI 18V: RNCC: 5 | RNVC: 2
C90ST0085-002: RNCC: 5 | RNVC: 2
C90ST0085-002: RNCC: 5 | RNVC: 2

10 May 2000

4730-14-537-0828
Tube To Boss Straight Adapter

145370828
84421-10: RNCC: 1 | RNVC: 2
R321016150: RNCC: 3 | RNVC: 2
R32-10-16X1-5: RNCC: 5 | RNVC: 2

24 Sep 2003

4730-14-284-1197
Sediment Strainer Element

142841197
NO PRIMARY REF14-284-1197: RNCC: 3 | RNVC: 2
9809820: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-393-4017
Quick Disconnect Plug

143934017
N006-226-83: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-508-3387
Tube Fitting Insert

145083387
213EPA64400-001REP.B: RNCC: 3 | RNVC: 2

7 Sep 1998

4730-14-503-2100
Tube To Boss Straight Adapter

145032100
P161T1010S: RNCC: 3 | RNVC: 2
721.T.10.10S: RNCC: 3 | RNVC: 2
74721T1010S: RNCC: 5 | RNVC: 2
721 T 10 10S: RNCC: 5 | RNVC: 2
721T10 10S: RNCC: 5 | RNVC: 2
721T10-10S: RNCC: 5 | RNVC: 2
721T1010S: RNCC: 5 | RNVC: 2
74721T1010S: RNCC: 5 | RNVC: 2

7 Jan 1998

4730-14-339-0624
Quick Disconnect Coupling Assembly

143390624
GT2-10: RNCC: 3 | RNVC: 2
GT2-10: RNCC: 5 | RNVC: 2
85-048-8830: RNCC: 6 | RNVC: 9
85-101-3571: RNCC: 6 | RNVC: 9

17 Dec 1976

4730-14-566-8474
Tube Coupling Nut

145668474
893 070 834 4: RNCC: 3 | RNVC: 2
A231004000618: RNCC: 5 | RNVC: 2

5 Jan 2011

4730-14-365-9628

4730-14-201-7102

4730-14-223-2981

4730-14-313-8914
Sediment Strainer Element

143138914
1618-1: RNCC: 3 | RNVC: 2
1618-1: RNCC: 5 | RNVC: 9
85-676-6080: RNCC: 6 | RNVC: 9

1 Jan 1974

4730-14-333-7062
Tube To Boss Straight Adapter

143337062
8473203171: RNCC: 3 | RNVC: 2
320317-001: RNCC: 3 | RNVC: 2
0941628017: RNCC: 5 | RNVC: 2
941628017: RNCC: 5 | RNVC: 9

23 Apr 1976

4730-14-405-7944
Tube Coupling

144057944
NO PRIMARY REF14-405-7944: RNCC: 3 | RNVC: 2
05190R2: RNCC: 5 | RNVC: 9

4 Dec 1985

4730-14-317-8071

4730-14-316-9096

4730-14-369-6595
Raccordement- Bride

143696595
GSM162-007F18: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-268-0210

4730-14-556-3798
Tube Elbow

145563798
06-11700: RNCC: 3 | RNVC: 9

3 Mar 2008

4730-14-330-6536

4730-14-559-1158
Tube Coupling Assembly

145591158
171 761 55: RNCC: 3 | RNVC: 2

8 Dec 2008

4730-14-221-2440
Bride De Couvercle

142212440
JKA02-44: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-387-3672
Tube Tee

143873672
0294201810: RNCC: 3 | RNVC: 2
302-283-401P: RNCC: 5 | RNVC: 2

15 Sep 1983

4730-14-354-1318
Tube To Boss Straight Adapter

143541318
52-16-15-21CYL: RNCC: 3 | RNVC: 2
248300: RNCC: 5 | RNVC: 2
99032936: RNCC: 5 | RNVC: 2
99032936: RNCC: 5 | RNVC: 2

16 Jan 1979

4730-14-257-2566
Fluid Passage Bolt

142572566
702A30-0000-20: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-407-3749
Quick Disconnect Coupling Half

144073749
RBE03-1100/OD/IC/JV: RNCC: 3 | RNVC: 2
RBE03-1100ICODJV: RNCC: 5 | RNVC: 2

12 Feb 1986

4730-14-429-2927
Tube Tee

144292927
F530-11: RNCC: 3 | RNVC: 2

11 Jan 1989

4730-14-485-8159
Pipeline Flexible Spacer

144858159
99A3-15B: RNCC: 3 | RNVC: 2

13 Feb 1997

4730-14-426-7985
Tube Tee

144267985
4730HEING273X8,8-168,3X7,1: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-524-4420
Quick Disconnect Coupling Half

145244420
RBE06-7810/IC/0/JE: RNCC: 3 | RNVC: 2
91711673: RNCC: 5 | RNVC: 2

20 Mar 2001

4730-14-224-3912
Tube Fitting Brazing Ferrule

142243912
GSM163-002F7-25-1-20: RNCC: 3 | RNVC: 2
GSM163-02F7-25-1-20: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-479-4915
Tube To Boss Straight Adapter

144794915
11042510: RNCC: 3 | RNVC: 2
11042510-1/4"BSP BRONZE: RNCC: 5 | RNVC: 2

16 Jan 1996

4730-14-559-9290
Tube Union

145599290
5010604085: RNCC: 1 | RNVC: 2
GZ15LVITHPCF: RNCC: 3 | RNVC: 2
21032235: RNCC: 5 | RNVC: 2

5 Mar 2009

4730-14-333-8720

4730-14-450-5968
Tube To Gas Fitting Straight Adapter

144505968
RCN14-12-13: RNCC: 3 | RNVC: 2

14 Oct 1991

4730-14-438-7405
Pipe Joint Welding Ring

144387405
LN324-079REP07: RNCC: 3 | RNVC: 2
LN324-079F7REP07: RNCC: 5 | RNVC: 2

3 Apr 1990

4730-14-566-7357
Tube Reducer

145667357
GR12/08LCFX: RNCC: 3 | RNVC: 2
A231004000476: RNCC: 5 | RNVC: 2

13 Dec 2010

4730-14-428-9302
Quick Disconnect Coupling Half

144289302
RBE03-1100/IA/HP: RNCC: 3 | RNVC: 2

28 Dec 1988

4730-14-459-6792
Fluid Pressure Line Multiple Connector

144596792
A10134-01-0000P004: RNCC: 3 | RNVC: 2

10 Dec 1992

4730-14-576-0651
Flange Elbow

145760651
M2852402420000: RNCC: 3 | RNVC: 2

28 May 2013

4730-14-309-4696
Fluid Passage Bolt

143094696
15312-10-4: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-446-8065
Tube To Boss Straight Adapter

144468065
RI1/4X1/2A3CX: RNCC: 3 | RNVC: 2
RI1/4X1/2A3CX: RNCC: 3 | RNVC: 9
RI1/4X1/2: RNCC: 5 | RNVC: 9

16 Apr 1991

4730-14-578-1250
Pipeline Flexible Spacer Fire Protective Cover

145781250
99/339/001/REVB/DN100/LG480: RNCC: 3 | RNVC: 2

4 Nov 2013

4730-14-367-8001
Quick Disconnect Coupling Half

143678001
S256-2DG: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-522-1645
Quick Disconnect Coupling Half

145221645
9698-12-33X42: RNCC: 3 | RNVC: 2

5 Oct 2000

4730-14-563-7249
Tube Elbow

145637249
SO22021-8: RNCC: 3 | RNVC: 2
128.2000.080: RNCC: 5 | RNVC: 2
SO22021-8: RNCC: 5 | RNVC: 2
128.2000.080: RNCC: 5 | RNVC: 2

9 Mar 2010

4730-14-559-9383
Quick Disconnect Coupling Half

145599383
7420926523: RNCC: 1 | RNVC: 2
SPI 09.7152/IA/JV: RNCC: 3 | RNVC: 2
20926523: RNCC: 5 | RNVC: 2

6 Mar 2009

4730-14-564-1425
Tube Nipple

145641425
3/4X1/2FF33MS: RNCC: 3 | RNVC: 2

12 Apr 2010

4730-14-366-6046

4730-14-330-6551

4730-14-241-5969
Prise De Pression

142415969
404233: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-326-9433

4730-14-255-8492
Raccord Bicone Droi

142558492
F3308: RNCC: 3 | RNVC: 9
48800005: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-304-4675
Bulkhead Hose Connector

143044675
F721-82: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-576-8430
Tube Tee

145768430
ASNA3752-161016: RNCC: 1 | RNVC: 2
PE20103-161016S: RNCC: 3 | RNVC: 2
ASNA3752-161016: RNCC: 5 | RNVC: 2

18 Jul 2013

4730-14-306-8012
Pipe Expansion Joint

143068012
C700-704REPA1: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-311-1735
Fluid Pressure Line Multiple Connector

143111735
SP6-00-05-22: RNCC: 3 | RNVC: 2
SP3-01-06-20: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-494-6952
Fluid Pressure Line Multiple Connector

144946952
NO PRIMARY REF14-494-6952: RNCC: 3 | RNVC: 2
01110707: RNCC: 5 | RNVC: 9
F300 0T 017 7926: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-423-4245
Pipe Flange

144234245
UA50088006PN100-11D1DN65: RNCC: 2 | RNVC: 2
4730HCPN100DN06511D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-504-6207
Self-Sealing Coupling Half

145046207
RACCO00056: RNCC: 3 | RNVC: 2
RACCO00056-SERT: RNCC: 5 | RNVC: 2

25 Feb 1998

4730-14-567-6308
Quick Disconnect Coupling Half

145676308
23REDN/LN320/001 F5 1/2RAC: RNCC: 2 | RNVC: 2
23REDN/LN320/001DN25 1/A2 1/2RAC: RNCC: 5 | RNVC: 2
23RE-LN320001DN25-F5-1/2RACC: RNCC: 5 | RNVC: 2

31 Mar 2011

4730-14-391-7609
Tube Coupling

143917609
360A76-1038-20: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-447-8941
Quick Disconnect Coupling Half

144478941
RBE06-7101IA0HP: RNCC: 3 | RNVC: 2
85-694-4820: RNCC: 6 | RNVC: 9

6 Jun 1991

4730-14-491-5204
Tube To Boss Straight Adapter

144915204
NO PRIMARY REF14-491-5204: RNCC: 3 | RNVC: 2
5000001115: RNCC: 5 | RNVC: 9
F300 0T 003 2194: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-220-6557
Tube Tee

142206557
Q1-57-20SD: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-527-9793
Fluid Pressure Line Multiple Connector

145279793
84423-12: RNCC: 1 | RNVC: 2
RA13012: RNCC: 3 | RNVC: 2

5 Dec 2001

4730-14-375-9723
Fluid Pressure Line Multiple Connector

143759723
NO PRIMARY REF14-375-9723: RNCC: 3 | RNVC: 2
404402686: RNCC: 5 | RNVC: 2
404402686: RNCC: 5 | RNVC: 9

30 Mar 1982

4730-14-310-3281
Douille Coudee

143103281
NO PRIMARY REF14-310-3281: RNCC: 3 | RNVC: 2
5959-15-21: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-490-5835
Fluid Flow Restrictor Unit

144905835
384834: RNCC: 3 | RNVC: 2
EPA21000-281: RNCC: 5 | RNVC: 1
384834-001: RNCC: 5 | RNVC: 9

2 Oct 1997

4730-14-251-3929
Raccord

142513929
220-05: RNCC: 3 | RNVC: 2
220-24: RNCC: 5 | RNVC: 9
220-25: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-447-1514
Tube Tee

144471514
GMA3-12PS: RNCC: 3 | RNVC: 2

3 May 1991

4730-14-524-8944
Tube Coupling

145248944
068-206066: RNCC: 3 | RNVC: 2
68-2060: RNCC: 5 | RNVC: 9

25 Apr 2001

4730-14-230-2112
Quick Disconnect Coupling Half

142302112
E29572-20DE: RNCC: 2 | RNVC: 1

1 Jan 1967

4730-14-229-6530
Raccord Intermediai

142296530
1050-21-272-15-0: RNCC: 3 | RNVC: 2
21-272-15-0: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-494-5507
Tube To Boss Straight Adapter

144945507
643 445 162: RNCC: 3 | RNVC: 2
F300 0T 017 4685: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-335-1356
Pipeline Flexible Spacer

143351356
I131NTE200PN16: RNCC: 2 | RNVC: 2
DILNTE200PN16: RNCC: 3 | RNVC: 2
DILNTE200PN16: RNCC: 5 | RNVC: 9

3 Jun 1976

4730-14-390-0183
Tube To Boss Straight Adapter

143900183
8F64OMXS: RNCC: 3 | RNVC: 2
8F64OMXS: RNCC: 3 | RNVC: 2
F64X-S12-3/8IN: RNCC: 5 | RNVC: 2
9881707120: RNCC: 5 | RNVC: 2
8F64XS: RNCC: 5 | RNVC: 2
F64XS12-3-8: RNCC: 5 | RNVC: 2
5420437: RNCC: 5 | RNVC: 2
85-695-0470: RNCC: 6 | RNVC: 9

26 Jan 1984

4730-14-327-5520
Tube Union

143275520
0RSA16X15-21N: RNCC: 3 | RNVC: 2
5A16-15-21CYL: RNCC: 3 | RNVC: 2
1204-16-15-21CYL: RNCC: 3 | RNVC: 2
202425881120: RNCC: 5 | RNVC: 2
121594: RNCC: 5 | RNVC: 2
5000824610: RNCC: 5 | RNVC: 2
A07050870: RNCC: 5 | RNVC: 2
A07050870: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-474-3510
Quick Disconnect Coupling Half

144743510
82-19: RNCC: 3 | RNVC: 2
5013C: RNCC: 5 | RNVC: 2

9 Feb 1995

4730-14-378-2934
Tube To Boss Straight Adapter

143782934
Q1-5GAI8LM12-150: RNCC: 3 | RNVC: 2
Q1-5GAI8LM12-150: RNCC: 5 | RNVC: 9

20 Jul 1982

4730-14-338-3342
Hydraulique Bloc

143383342
J00650-01-0200P001: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-521-2993
Tube Tee

145212993
8WV115095-006: RNCC: 3 | RNVC: 2
HEL8WV115095-006: RNCC: 5 | RNVC: 9

19 Jul 2000

4730-14-497-1969
Fluid Pressure Line Multiple Connector

144971969
0R/C28017466: RNCC: 3 | RNVC: 2
0R-C28017466: RNCC: 5 | RNVC: 2
F300 0T 022 8105: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-569-2517
Quick Disconnect Coupling Half

145692517
HCB 03.7150/IC/DG: RNCC: 3 | RNVC: 2

29 Aug 2011

4730-14-458-3923
Pipe Expansion Joint

144583923
28909010400/A/REP7: RNCC: 3 | RNVC: 2
3021807: RNCC: 5 | RNVC: 2
3021807: RNCC: 5 | RNVC: 2

22 Oct 1992

4730-14-300-7535
Tube Tee

143007535
GSM523-026F54: RNCC: 3 | RNVC: 2
GSM523-26F54: RNCC: 5 | RNVC: 2
411MA127FB19: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-364-8728
Pipe Flange

143648728
4730CA-88,9: RNCC: 2 | RNVC: 2
MEC10374: RNCC: 3 | RNVC: 2
4730CA88-9: RNCC: 3 | RNVC: 9

2 Sep 1980

4730-14-031-0635
Tube To Boss Straight Adapter

140310635
9101208551: RNCC: 3 | RNVC: 2
9401208558: RNCC: 5 | RNVC: 2
VDP4699: RNCC: 5 | RNVC: 2
A1-20-27-150-51: RNCC: 5 | RNVC: 9

14 Jun 1980

4730-14-440-1219
Bride A Zinc

144401219
MAT162-0117F4: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-230-1971
Tube Union

142301971
266 3-4: RNCC: 3 | RNVC: 2
344 3-4: RNCC: 5 | RNVC: 2
266 3-4: RNCC: 5 | RNVC: 2
43700071: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-563-3282
Boss Reducer

145633282
2 024 008: RNCC: 3 | RNVC: 2
101585: RNCC: 5 | RNVC: 2

26 Jan 2010

4730-14-268-1221
Plaque De Reduction

142681221
6784-1DH28-6: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-229-2399
Bouchon Special

142292399
9210004000: RNCC: 3 | RNVC: 2
9-210004-000: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-562-8291
Hose Clamp

145628291
E27851DL032050Z16: RNCC: 2 | RNVC: 2
SX8 32-50: RNCC: 3 | RNVC: 2
SX-8-32-50: RNCC: 5 | RNVC: 2

25 Nov 2009

4730-14-403-5168
Raccord Hydrau Bloc

144035168
10016-018: RNCC: 3 | RNVC: 2
10116-18: RNCC: 5 | RNVC: 2

21 Aug 1985

4730-14-324-1457

4730-14-563-7518
Tube Elbow

145637518
MDS81B501: RNCC: 3 | RNVC: 2

10 Mar 2010

4730-14-308-9021

4730-14-282-2066

4730-14-331-0982
Coude Pour Tube

4730-14-290-4404

4730-14-329-2831
Bride De Calage

143292831
BRIDE200EP30NT10X18DP295: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-411-5412
Coude

144115412
520042: RNCC: 3 | RNVC: 2
520043: RNCC: 5 | RNVC: 2

20 Aug 1986

4730-14-577-0103
Tube To Hose Tee

145770103
14010922: RNCC: 3 | RNVC: 2
4730MT0200467: RNCC: 6 | RNVC: 9

29 Jul 2013

4730-14-229-8359

4730-14-203-2649

4730-14-560-6138
Tube To Boss Straight Adapter

145606138
10439024: RNCC: 3 | RNVC: 2

5 May 2009

4730-14-565-2176
Tube Elbow

145652176
820.090.050: RNCC: 3 | RNVC: 2
SA017445: RNCC: 5 | RNVC: 2

27 Jul 2010

4730-14-491-3186
Graisseur

144913186
GG337: RNCC: 3 | RNVC: 9
F300 0T 002 2433: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-567-3849
Hose Clamp

145673849
1102205: RNCC: 3 | RNVC: 2

10 Mar 2011

4730-14-427-3273
Tube Tee

144273273
4730HDEG323,9X7,1: RNCC: 2 | RNVC: 2

13 Oct 1988

4730-14-301-0578
Tube To Boss Straight Adapter

143010578
23S06009: RNCC: 3 | RNVC: 2
23S06009: RNCC: 5 | RNVC: 2
23S6-9: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-464-3642
Tube Coupling Assembly

144643642
0-3601PS32A: RNCC: 3 | RNVC: 2
0-3601PS32A: RNCC: 5 | RNVC: 9

28 Jul 1993

4730-14-329-0405
Tube To Boss Straight Adapter

143290405
12-20 3-8BGS: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-345-7330
Pipe Expansion Joint

143457330
24151090200: RNCC: 3 | RNVC: 2
241510902: RNCC: 5 | RNVC: 9
603902: RNCC: 5 | RNVC: 9

5 Oct 1977

4730-14-414-5064
Tube To Boss Straight Adapter

144145064
815914139966: RNCC: 3 | RNVC: 2

5 Feb 1987

4730-14-349-0166
Tube Tee

143490166
R8X6SX8: RNCC: 3 | RNVC: 2

19 Apr 1978

4730-14-534-6602
Tube Coupling

145346602
5420 369: RNCC: 3 | RNVC: 2

1 Apr 2003

4730-14-459-6174
Tube Union

144596174
F9BPB8-M12X1-5: RNCC: 3 | RNVC: 2
91628563: RNCC: 5 | RNVC: 2

10 Dec 1992

4730-14-561-4697
Hose Clamp

145614697
NSA5522-227-247: RNCC: 1 | RNVC: 2
25-2-060-247: RNCC: 3 | RNVC: 2
NSA5522-227-247: RNCC: 5 | RNVC: 2

21 Jul 2009

4730-14-496-1292
Tube To Boss Straight Adapter

144961292
RIA253125H-1006: RNCC: 3 | RNVC: 2
65236-2: RNCC: 3 | RNVC: 2
F300 0T 020 9366: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-339-9006
Tube Coupling Assembly

143399006
0-3901H32A: RNCC: 3 | RNVC: 2
0-3901H32A: RNCC: 5 | RNVC: 9
85-688-9614: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-14-330-8011
Barillet A 4 Voies

143308011
GSM163-005F25: RNCC: 3 | RNVC: 2
GSM163-05F25: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-444-7802
Tube Union

144447802
4DS16CL1/2K: RNCC: 3 | RNVC: 2
568295: RNCC: 5 | RNVC: 2
7004130304: RNCC: 5 | RNVC: 2
704Z30304: RNCC: 5 | RNVC: 2
568295: RNCC: 5 | RNVC: 9
F300 0T 009 9615: RNCC: 6 | RNVC: 9

21 Jan 1991

4730-14-401-8512
Quick Disconnect Coupling Half

144018512
9681-02-444: RNCC: 3 | RNVC: 2
9681-02-444: RNCC: 5 | RNVC: 9
0681-02-40X45: RNCC: 5 | RNVC: 9
9681-02-40X45: RNCC: 5 | RNVC: 9

13 Jun 1985

4730-14-400-4230
Quick Disconnect Coupling Half

144004230
RBE06-2101/OD/IC/VD: RNCC: 3 | RNVC: 2
RBE06-2101ODICVD: RNCC: 5 | RNVC: 2

24 Apr 1985

4730-14-257-4836
Tube To Boss Straight Adapter

142574836
13-201-50: RNCC: 3 | RNVC: 2
870-80G65: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-428-9456
Pipe Flange

144289456
4730JAPN150DN40-11D1S-5: RNCC: 2 | RNVC: 2

28 Dec 1988

4730-14-434-7376
Fluid Flow Restrictor Unit

144347376
NO PRIMARY REF14-434-7376: RNCC: 3 | RNVC: 2
0445191091301: RNCC: 5 | RNVC: 9

3 Oct 1989

4730-14-410-8681
Fluid Filter Element

144108681
NO PRIMARY REF14-410-8681: RNCC: 3 | RNVC: 2
CH0513101331N01: RNCC: 5 | RNVC: 9
85-692-9102: RNCC: 6 | RNVC: 9

22 Jul 1986

4730-14-428-7177
Hose To Boss Straight Adapter

144287177
UMCAG13X15-21N: RNCC: 3 | RNVC: 2
5947124: RNCC: 5 | RNVC: 2

13 Dec 1988

4730-14-423-4126
Pipe Flange

144234126
UA50088006PN50-11C1DN200: RNCC: 2 | RNVC: 2
4730HCPN50DN20011C1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-265-9593
Bouchon

142659593
03-67-165: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-461-5306
Tube Tee

144615306
GSM164-066F3: RNCC: 3 | RNVC: 2
MAT164-0360F3: RNCC: 3 | RNVC: 2

16 Mar 1993

4730-14-503-2896
Raccord Fusible

145032896
57428: RNCC: 3 | RNVC: 2
704A34-423-025: RNCC: 5 | RNVC: 2

7 Jan 1998

4730-14-231-5754
Anchor And Reinforcement Pipe Clamp

142315754
NO PRIMARY REF14-231-5754: RNCC: 3 | RNVC: 2
840T26X34: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-261-8494
Pipe Flange

142618494
RUHB4-22: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-505-3614
Fluid Pressure Line Multiple Connector

145053614
WH12-PLR-KD-0MD: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-460-9167
Fluid Pressure Line Multiple Connector

144609167
TB4011870: RNCC: 3 | RNVC: 2

16 Feb 1993

4730-14-293-3443
Bulkhead Hose Connector

142933443
121E52-138-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-278-8091

4730-14-284-4268
Embout De Tuyau

142844268
6118-0015: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-475-8421
Sediment Strainer Element

144758421
302006KFL: RNCC: 3 | RNVC: 2
RFLLTGNI-REP6DN20: RNCC: 5 | RNVC: 2

9 May 1995

4730-14-207-9016
Quick Disconnect Coupling Half

142079016
S61-701-40-45: RNCC: 2 | RNVC: 2

1 Jan 1964

4730-14-498-2996
Tube To Boss Straight Adapter

144982996
91952412: RNCC: 3 | RNVC: 2
PAA25-20-021: RNCC: 3 | RNVC: 2
202520021: RNCC: 3 | RNVC: 2
F300 0T 004 7609: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-257-2184
Bulkhead Hose Connector

142572184
330A75-1329-20: RNCC: 3 | RNVC: 2
330A75-1329-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-468-7450
Sediment Strainer Element

144687450
90275/1REP2: RNCC: 3 | RNVC: 2
F101501AISI316L: RNCC: 5 | RNVC: 2

16 Mar 1994

4730-14-561-8062
Tube Reducer

145618062
RED22/15LCF: RNCC: 3 | RNVC: 2
RED22/15LCF: RNCC: 5 | RNVC: 9

8 Sep 2009

4730-14-229-8322

4730-14-448-8310
Tube Fitting Socket Welded Ferrule

144488310
4730HQ-2DE76,1: RNCC: 2 | RNVC: 2
Y07134-03-0000P002DE76,1: RNCC: 3 | RNVC: 2

17 Jul 1991

4730-14-338-2576
Graisseur Equerre

143382576
5013000-10X150: RNCC: 3 | RNVC: 2
ALG5013000-10X150: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-367-7211

4730-14-565-9073
Tube To Boss Tee

145659073
CQ01020318A: RNCC: 3 | RNVC: 2

4 Oct 2010

4730-14-334-3259

4730-14-243-6104

4730-14-219-3804

4730-14-423-4237
Pipe Flange

144234237
UA50088006PN100-11D1DN40: RNCC: 2 | RNVC: 2
4730HCPN100DN04011D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-461-4751
Tube To Boss Straight Adapter

144614751
UMA16X15-21DTCW12: RNCC: 3 | RNVC: 2

10 Mar 1993

4730-14-469-3247
Tube Tee

144693247
BN329512TERED355,6-323,9-4,77: RNCC: 3 | RNVC: 2

20 Apr 1994

4730-14-432-4694
Pipe Flange

144324694
BN329-506C2DN300: RNCC: 3 | RNVC: 2

14 Jun 1989

4730-14-242-7948
Tube Tee

142427948
NG411-02-38PL8: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-505-1742
Fluid Pressure Line Multiple Connector

145051742
1977D16-02: RNCC: 3 | RNVC: 2

11 Mar 1998

4730-14-373-6697
Fluid Passage Bolt

143736697
NO PRIMARY REF14-373-6697: RNCC: 3 | RNVC: 2
12016LXC38: RNCC: 5 | RNVC: 9

13 Nov 1981

4730-14-212-1210
Pipe Flange

142121210
BN320-576-30F2-10: RNCC: 3 | RNVC: 2

5 Jul 1980

4730-14-244-0288
Tube Tee

142440288
NG40901-4APL78N0M1: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-398-5855
Tube Tee

143985855
GSM164-052F11: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-313-5636
Bulkhead Hose Connector

143135636
M3E521-13-802: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-445-3020
Quick Disconnect Coupling Half

144453020
RBE11.7103-ICJV: RNCC: 3 | RNVC: 2

8 Feb 1991

4730-14-371-5428
Tube To Boss Straight Adapter

143715428
350A54-1055-20: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-383-3585
Self-Sealing Coupling Assembly

143833585
N003-222-80: RNCC: 3 | RNVC: 2
N00322280: RNCC: 5 | RNVC: 2
91714483: RNCC: 5 | RNVC: 2
003-222-79: RNCC: 5 | RNVC: 9

11 Apr 1983

4730-14-423-4086
Pipe Flange

144234086
UA50088006PN16-11ADN150: RNCC: 2 | RNVC: 2
4730JGDN150: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-320-2048
Tube To Boss Straight Adapter

143202048
Q1-53-25-21-27: RNCC: 3 | RNVC: 2
UFK25X20-27N: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-426-3411
Tube To Boss Straight Adapter

144263411
R95405D12D: RNCC: 2 | RNVC: 2
R95405D12-18X150-16X150LAITON: RNCC: 5 | RNVC: 2
99109082: RNCC: 5 | RNVC: 2

23 Aug 1988

4730-14-301-8073
Quick Disconnect Coupling Half

143018073
NO PRIMARY REF14-301-8073: RNCC: 3 | RNVC: 2
4090-4097-20-25: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-265-2369
Tube Fitting Clinch Sleeve

142652369
Q3-405-10: RNCC: 3 | RNVC: 2
DI10N: RNCC: 3 | RNVC: 2
1I10: RNCC: 3 | RNVC: 2
BES10: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-370-3852
Tube Fitting Brazing Ferrule

143703852
BN320-513CREP1: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-562-4923
Tube To Boss Straight Adapter

145624923
719222: RNCC: 3 | RNVC: 2

29 Oct 2009

4730-14-576-9613
Hose Connector Sleeve

145769613
TUYAU00123: RNCC: 3 | RNVC: 2
4730MT0200252: RNCC: 6 | RNVC: 9

25 Jul 2013

4730-14-213-6114

4730-14-234-1846
Equerre Orientable

142341846
NN1509-4-8X100: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-562-5909
Pipeline Flexible Spacer

145625909
R1/100/KR 320-WG/E: RNCC: 3 | RNVC: 2

5 Nov 2009

4730-14-461-3327
Tube Coupling Assembly

144613327
A.GEV-12S-NPT-3/8: RNCC: 3 | RNVC: 2

8 Mar 1993

4730-14-490-3133
Special-Shaped Hose Clamp

144903133
J05085-04-0700P004: RNCC: 3 | RNVC: 2

24 Sep 1997

4730-14-430-4644
Tube Tee

144304644
S4710X0002-1092: RNCC: 2 | RNVC: 2
F0532S4710X0002-1092: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-249-7999
Tube To Boss Straight Adapter

142497999
13-301-50: RNCC: 3 | RNVC: 2
872-80X65: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-453-9763
Tube To Boss Straight Adapter

144539763
LN329-017REP104: RNCC: 3 | RNVC: 2
LN329-017F18DE26,9EQ: RNCC: 5 | RNVC: 2
RAR1488: RNCC: 5 | RNVC: 2

19 Mar 1992

4730-14-344-5746
Tube Tee

143445746
1TR25X25X20NU: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-373-8512
Fluid Passage Bolt

143738512
TL400771P0001: RNCC: 3 | RNVC: 2

13 Nov 1981

4730-14-350-4669
Pipe Flange

143504669
212438: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-523-7951

4730-14-530-0607
Vapeur Purgeur

4730-14-338-8666

4730-14-246-2985

4730-14-214-6837
Bouchon Special

142146837
A74205: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-577-1242
Pipe Tee

145771242
ASNA3757E242412: RNCC: 1 | RNVC: 2
ASNA3757E242412: RNCC: 3 | RNVC: 2

12 Aug 2013

4730-14-229-0288

4730-14-576-8199
Flange To Tube Straight Adapter

145768199
M2821346400000: RNCC: 3 | RNVC: 2

17 Jul 2013

4730-14-571-3399
Pipe Union

145713399
ABS1491T16: RNCC: 1 | RNVC: 2
32945LP16T: RNCC: 3 | RNVC: 2

15 Mar 2012

4730-14-461-1641
Raccord De Sortie P

4730-14-405-4417
Tube Coupling

144054417
CB2A8 3/8: RNCC: 3 | RNVC: 9

27 Nov 1985

4730-14-494-8853
Tube To Boss Straight Adapter

144948853
NO PRIMARY REF14-494-8853: RNCC: 3 | RNVC: 2
5420428: RNCC: 5 | RNVC: 2
F300 0T 018 0399: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-474-4523
Pipe Flange

144744523
A1-60470EB: RNCC: 3 | RNVC: 2

15 Feb 1995

4730-14-450-2513
Quick Disconnect Coupling Assembly

144502513
SDS0-40PCD: RNCC: 3 | RNVC: 2
SDS0-40PCD: RNCC: 5 | RNVC: 2

25 Sep 1991

4730-14-417-7872
Tube Tee

144177872
ST2069DN50-40Z2CND17-12-02: RNCC: 2 | RNVC: 2

22 Jul 1987

4730-14-484-8684
Ecrou Special

144848684
U1778-D85-162: RNCC: 3 | RNVC: 2
D85-162: RNCC: 5 | RNVC: 2

12 Dec 1996

4730-14-349-7957
Tube To Boss Straight Adapter

143497957
NO PRIMARY REF14-349-7957: RNCC: 3 | RNVC: 2
Z45957: RNCC: 5 | RNVC: 9

14 Jun 1978

4730-14-378-2399
Raccord Equipe

143782399
MAT001-03-00-2: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-407-6962
Pipeline Flexible Spacer

144076962
NO PRIMARY REF14-407-6962: RNCC: 3 | RNVC: 2
0329-1302-340-5: RNCC: 5 | RNVC: 9

27 Feb 1986

4730-14-389-5323
Bulkhead Hose Connector

143895323
365A81-0074-00: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-296-1447
Tube To Boss Straight Adapter

142961447
341A76-1319-20: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-229-8703
Fluid Pressure Line Multiple Connector

142298703
509-8-12X100: RNCC: 3 | RNVC: 2
13L8-12X100: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-414-6871
Fluid Pressure Line Multiple Connector

144146871
31180613: RNCC: 3 | RNVC: 2
222-9736: RNCC: 5 | RNVC: 2

25 Feb 1987

4730-14-453-9765
Tube To Boss Straight Adapter

144539765
LN329-017REP78: RNCC: 3 | RNVC: 2
LN329-017F16DN13,5G1/2"A EQ: RNCC: 5 | RNVC: 2
RAR1490: RNCC: 5 | RNVC: 2

19 Mar 1992

4730-14-222-7288
Tube Tee

142227288
GSM1297FE3-15TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-455-6900
Tube To Hose Straight Adapter

144556900
MAT166-0001T-F16REP1: RNCC: 3 | RNVC: 2

11 Jun 1992

4730-14-228-6793
Tube Tee

142286793
GSM1297FD3-1TABLEAU2D1-14: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-239-4980
Ecrou-Raccord

142394980
0176-475024: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-263-7469
Tube Tee

142637469
T75: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-397-7538
Coude Pour Tuyau

4730-14-557-6798
Hose Coupling

145576798
980119: RNCC: 3 | RNVC: 2

3 Jul 2008

4730-14-569-8327
Pipe To Hose Straight Adapter

145698327
1030 50.60: RNCC: 3 | RNVC: 2

24 Oct 2011

4730-14-210-9774
Te De Reduction

142109774
1TR10X10X8: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-574-5351
Lubrication Fitting

145745351
10678294000: RNCC: 3 | RNVC: 1

28 Jan 2013

4730-14-576-8178
Flange To Flange Straight Adapter

145768178
M0003016400000: RNCC: 3 | RNVC: 2

17 Jul 2013

4730-14-288-9020

4730-14-323-7823

4730-14-215-2388

4730-14-507-9006
Tube Tee

145079006
41RA16L/16X150F/12L.NU: RNCC: 3 | RNVC: 2
141154306: RNCC: 5 | RNVC: 2
5005030501: RNCC: 5 | RNVC: 2

26 Aug 1998

4730-14-430-8868
Hydraulic System Accessories Manifold

144308868
NO PRIMARY REF14-430-8868: RNCC: 3 | RNVC: 2
80753001: RNCC: 5 | RNVC: 9

29 Mar 1989

4730-14-446-5955
Quick Disconnect Coupling Assembly

144465955
HX 050 3100 1INCH-BI: RNCC: 3 | RNVC: 2

2 Apr 1991

4730-14-577-5980
Tube Coupling Nut

145775980
A104-8RRZ694: RNCC: 3 | RNVC: 2
A104-8RRZ694: RNCC: 3 | RNVC: 9
RU47054: RNCC: 5 | RNVC: 1

26 Sep 2013

4730-14-480-2015
Self-Sealing Coupling Assembly

144802015
RBE03-7806IC6: RNCC: 3 | RNVC: 2

28 Feb 1996

4730-14-268-6304
Tube To Boss Straight Adapter

142686304
Q1-53-41-52X150: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-378-5340
Raccord Coude

143785340
304-040-801-0: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-378-6566
Tube To Boss Straight Adapter

143786566
LL127-CK1406S: RNCC: 3 | RNVC: 2
812014179966: RNCC: 5 | RNVC: 2

11 Aug 1982

4730-14-401-7616
Tube Tee

144017616
NO PRIMARY REF14-401-7616: RNCC: 3 | RNVC: 2
EA35U1GD: RNCC: 5 | RNVC: 9

13 Jun 1985

4730-14-278-3119
Tube To Boss Straight Adapter

142783119
9PL6-8X1-4GAZC0: RNCC: 3 | RNVC: 2
9PL6-8X1-4GAZC0: RNCC: 3 | RNVC: 2
870946677040: RNCC: 5 | RNVC: 2
0946677040: RNCC: 5 | RNVC: 2
0946677040: RNCC: 5 | RNVC: 9
946677040: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-570-1883
Fluid Passage Bolt

145701883
NO PRIMARY REF 14-570-1883: RNCC: 3 | RNVC: 2
VCM 8X125: RNCC: 5 | RNVC: 9
FS0003777: RNCC: 6 | RNVC: 9

25 Nov 2011

4730-14-227-4188

4730-14-340-1162
Tube To Boss Straight Adapter

143401162
13-6-8X13: RNCC: 3 | RNVC: 2

18 Jan 1977

4730-14-435-1354
Tube Fitting Clinch Sleeve

144351354
0124060040: RNCC: 3 | RNVC: 2
124060040: RNCC: 5 | RNVC: 2
SBE4-1: RNCC: 5 | RNVC: 2

23 Oct 1989

4730-14-206-4231
Tube Tee

142064231
56 1-4: RNCC: 3 | RNVC: 2
134 1-4: RNCC: 3 | RNVC: 2
AFY56 1-4: RNCC: 5 | RNVC: 2
0935592631: RNCC: 5 | RNVC: 2
935592631: RNCC: 5 | RNVC: 9
935592631: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-476-9394
Tube Fitting Flared Sleeve

144769394
DR8,5: RNCC: 3 | RNVC: 2
6503675D: RNCC: 5 | RNVC: 2
71600600: RNCC: 5 | RNVC: 2

12 Jul 1995

4730-14-426-7962
Tube Tee

144267962
4730HEING219,1X8-76,1X2,9: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-239-4975
Boulon A Passage De

142394975
0176-525029: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-303-0471
Bride De Blocage

143030471
2-12722: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-216-1595
Bouchon Special

142161595
A71547: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-266-0462

4730-14-412-6500
Raccord

144126500
DIV/AT1034-1/1-85: RNCC: 3 | RNVC: 2

21 Oct 1986

4730-14-322-9585
Fluid Pressure Line Multiple Connector

143229585
121E91-100-11-0: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-509-4408

4730-14-512-6709

4730-14-234-4866
Reducteur

142344866
489P429: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-233-8747
Demi-Coquille Racco

142338747
86049: RNCC: 3 | RNVC: 2
9567158030: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-364-4109

4730-14-323-9040

4730-14-568-3634
Tube To Hose Straight Adapter

145683634
5010621110: RNCC: 1 | RNVC: 2
93102202: RNCC: 3 | RNVC: 2
20712800: RNCC: 5 | RNVC: 2

25 May 2011

4730-14-562-5386
Tube To Boss Elbow

145625386
3169 10 17: RNCC: 3 | RNVC: 2
FS0002388: RNCC: 6 | RNVC: 9

3 Nov 2009

4730-14-261-5588

4730-14-246-1409

4730-14-493-3017
Tube Union

144933017
GE22PLRA3C: RNCC: 3 | RNVC: 2
F300 0T 012 1533: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-225-5889
Contrebride Sortie

142255889
PF25250: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-396-3997
Threaded Tube Fitting Plug

143963997
BA16: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-238-2897

4730-14-246-5916

4730-14-297-8953
Bloc De Derivation

142978953
411MA0162FA8: RNCC: 3 | RNVC: 2
411MA162FA8: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-574-6661
Lubrication Fitting

145746661
7400914167: RNCC: 3 | RNVC: 2
914167: RNCC: 5 | RNVC: 2

12 Feb 2013

4730-14-367-7245

4730-14-348-5655

4730-14-262-1611

4730-14-445-7655
Poussoir De Verin

144457655
BLC236394: RNCC: 3 | RNVC: 2

25 Feb 1991

4730-14-246-1148

4730-14-348-2035

4730-14-400-8188
Tube To Boss Straight Adapter

144008188
9936500400: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-363-5369

4730-14-267-8571

4730-14-450-7385
Tube Union

144507385
UI21: RNCC: 3 | RNVC: 9

21 Oct 1991

4730-14-372-0407

4730-14-217-5357

4730-14-484-5102
Flexible Tube Coupling Assembly

144845102
L32.311.F3: RNCC: 3 | RNVC: 2
L32-311F3: RNCC: 5 | RNVC: 2

21 Nov 1996

4730-14-235-8777
Tube To Boss Straight Adapter

142358777
4AG27-21-27N: RNCC: 3 | RNVC: 2
G12-27-21-27CYL: RNCC: 3 | RNVC: 2
UMAG27X20-27N: RNCC: 3 | RNVC: 2
4AG27-21-27CYL: RNCC: 3 | RNVC: 2
MG27: RNCC: 3 | RNVC: 2
G12-27-21-27: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-273-5140
Pipe Flange

142735140
7062CB1F1-108UE10Z1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-010-0421
Fluid Passage Bolt

140100421
3130S62-25-109: RNCC: 3 | RNVC: 2

1 Jan 1961

4730-14-524-4236
Adaptateur

145244236
4-4WG4MXSM0-L38: RNCC: 3 | RNVC: 2

16 Mar 2001

4730-14-241-2059
Raccord Arriere Dro

142412059
JGA08-08A: RNCC: 3 | RNVC: 2
13580-71: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-344-6987
Fluid Pressure Line Multiple Connector

143446987
EA1M713-098: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-234-0909
Te Male Pour Tube A

142340909
19-8-5-10C0NN: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-396-0726
Tube Tee

143960726
133 1/2: RNCC: 3 | RNVC: 2
9200225: RNCC: 5 | RNVC: 2
133 1-2: RNCC: 5 | RNVC: 2

27 Nov 1984

4730-14-394-7181
Lubrication Fitting

143947181
NO PRIMARY REF14-394-7181: RNCC: 3 | RNVC: 2
G25-06-100: RNCC: 5 | RNVC: 9

28 Aug 1984

4730-14-258-9193

4730-14-417-8383
Embout Lisse

144178383
108ELM10: RNCC: 3 | RNVC: 9

29 Jul 1987

4730-14-245-5270
Embout Filete Gonfl

142455270
502485: RNCC: 3 | RNVC: 2
502485: RNCC: 6 | RNVC: 9

1 Jan 1968

4730-14-334-8361

4730-14-366-5971

4730-14-229-2708

4730-14-340-3576
Raccord Anemo Corps

143403576
M3C781-10-01: RNCC: 3 | RNVC: 2

14 Feb 1977

4730-14-576-1312
Non-Metallic Connecting Sleeve

145761312
ABS1150C08-001: RNCC: 1 | RNVC: 2
ABS1150C08-001: RNCC: 3 | RNVC: 2
ABS1150C08-001: RNCC: 5 | RNVC: 2

30 May 2013

4730-14-354-0935
Tube Coupling

143540935
A32169-1: RNCC: 3 | RNVC: 2
A32169: RNCC: 5 | RNVC: 2

16 Jan 1979

4730-14-221-6618
Mamelon Double Pour

142216618
A10-75-610-07-0: RNCC: 3 | RNVC: 2
A10-75-610-07-0: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-574-0776
Tube To Boss Straight Adapter

145740776
13035950L: RNCC: 3 | RNVC: 2

4 Dec 2012

4730-14-520-8012
Tuyau Bouchon

4730-14-235-7027

4730-14-492-1821
Contre-Ecrou

144921821
0000355350: RNCC: 3 | RNVC: 2
F300 0T 007 1189: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-220-6523

4730-14-563-7963
Tube Elbow

145637963
8047638: RNCC: 3 | RNVC: 2

16 Mar 2010

4730-14-368-0806
Manchon Raidisseur

143680806
N3051TP5F6A: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-565-2175
Tube Elbow

145652175
820.045.075: RNCC: 3 | RNVC: 2
SA017479: RNCC: 5 | RNVC: 2

27 Jul 2010

4730-14-492-1072
Tube To Boss Straight Adapter

144921072
NO PRIMARY REF14-492-1072: RNCC: 3 | RNVC: 2
03-0134: RNCC: 5 | RNVC: 9
F300 0T 006 9524: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-370-1290
Quick Disconnect Coupling Half

143701290
RBE8-7808IAW: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-371-8607
Tube To Boss Straight Adapter

143718607
GSM164-040F11: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-413-6251
Tube Fitting Brazing Ferrule

144136251
15-14-3804: RNCC: 3 | RNVC: 9

6 Jan 1987

4730-14-376-5179
Tube To Boss Straight Adapter

143765179
NO PRIMARY REF14-376-5179: RNCC: 3 | RNVC: 2
404188236: RNCC: 5 | RNVC: 9
404188236: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-353-8220
Tube To Boss Straight Adapter

143538220
0607-2202-00: RNCC: 3 | RNVC: 2

16 Jan 1979

4730-14-364-0256
Tube Tee

143640256
366A52-1014-00: RNCC: 3 | RNVC: 2

7 Aug 1980

4730-14-335-8131
Quick Disconnect Coupling Half

143358131
8010: RNCC: 3 | RNVC: 2
RBE03-1806: RNCC: 3 | RNVC: 2
8010: RNCC: 5 | RNVC: 2
RBE3-1806: RNCC: 5 | RNVC: 9

24 Jul 1976

4730-14-296-3284
Fluid Pressure Line Multiple Connector

142963284
F220-59: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-407-6964
Pipeline Flexible Spacer

144076964
NO PRIMARY REF14-407-6964: RNCC: 3 | RNVC: 2
0329-1302-330-30: RNCC: 5 | RNVC: 9

27 Feb 1986

4730-14-441-8777
Flexible Tube Coupling Assembly

144418777
K52-50-603: RNCC: 3 | RNVC: 2

24 Sep 1990

4730-14-497-9349
Diaphragme Non Usin

144979349
MAT178-0119F9: RNCC: 3 | RNVC: 2

28 Oct 1997

4730-14-444-9964
Tube Union

144449964
G4BRAB12-3/8: RNCC: 3 | RNVC: 2
G4BRAB12-3/8: RNCC: 3 | RNVC: 9
G4BRAB12-3/8NU: RNCC: 5 | RNVC: 9
G4RAB12-3/8: RNCC: 5 | RNVC: 9
F300 0T 005 4846: RNCC: 6 | RNVC: 9

30 Jan 1991

4730-14-575-7763
Flange To Tube Straight Adapter

145757763
M2811344300000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-559-7571
Tube Elbow

145597571
C8UNPMB12M22: RNCC: 3 | RNVC: 2
C8UNPMB12M22: RNCC: 5 | RNVC: 2
C8UNPMB12M22: RNCC: 5 | RNVC: 9

16 Feb 2009

4730-14-232-9252
Bouchon Special

142329252
58915: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-470-4526
Flexible Bloc Suppo

144704526
77732090C: RNCC: 3 | RNVC: 2

21 Jun 1994

4730-14-573-0172
Pipe Coupling

145730172
ENSEM03770: RNCC: 3 | RNVC: 2

4 Sep 2012

4730-14-557-5858
Pipe Locknut

145575858
CONTR00010: RNCC: 3 | RNVC: 2

24 Jun 2008

4730-14-262-1577
Pipe Flange

142621577
7062DJ1F1M36-3-5-14CD2-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-470-3382
Tube To Boss Straight Adapter

144703382
21-124-6-6: RNCC: 3 | RNVC: 2

15 Jun 1994

4730-14-563-7204
Tube Coupling Assembly

145637204
YEA.210.0187: RNCC: 3 | RNVC: 2
YEA.210.0187: RNCC: 5 | RNVC: 2

9 Mar 2010

4730-14-570-3595
Tube Coupling Body

145703595
PER201523081A1: RNCC: 3 | RNVC: 2

9 Dec 2011

4730-14-576-3128
Quick Disconnect Coupling Half

145763128
4045: RNCC: 3 | RNVC: 2

12 Jun 2013

4730-14-374-4463
Bride Speciale

143744463
MX69REP35: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-391-7769
Equipe Embout

143917769
DA2C512413610: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-210-9775
Te De Reduction

142109775
1TR14X10X10: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-397-4922
Tube Union

143974922
3A28NE: RNCC: 3 | RNVC: 2
11-28TF: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-234-5340
T Rapide

142345340
JBA04-17: RNCC: 3 | RNVC: 2
5060SSVBF: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-304-9288
Grain De Raccord

143049288
NO PRIMARY REF14-304-9288: RNCC: 3 | RNVC: 2
B4C361466REP3: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-576-9223
Tube To Boss Straight Adapter

145769223
047504-001: RNCC: 3 | RNVC: 2
4730MT0200133: RNCC: 6 | RNVC: 9

23 Jul 2013

4730-14-495-1969
Graisseur

144951969
NO PRIMARY REF14-495-1969: RNCC: 3 | RNVC: 2
G10013: RNCC: 5 | RNVC: 9
F300 0T 018 6349: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-225-7496
Raccord Equipe

142257496
G6710-04: RNCC: 3 | RNVC: 9
062075907: RNCC: 5 | RNVC: 9
75907T: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-273-5047
Tube Coupling

142735047
7062BA1RPET2-20C337A: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-263-8636
Compensateur De Dil

142638636
KRA1229-64B: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-473-2772
Tube To Hose Straight Adapter

144732772
3FF82-14-8B: RNCC: 3 | RNVC: 2
3FF82-14-8B: RNCC: 3 | RNVC: 9

13 Dec 1994

4730-14-408-8314
Raccord Tournant

144088314
K10A50-202P1: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-249-4284

4730-14-287-3240

4730-14-567-8307
Flange To Pipe Straight Adapter

145678307
M2821336100000: RNCC: 3 | RNVC: 2

14 Apr 2011

4730-14-250-1992

4730-14-328-9962

4730-14-348-0528
Raccord Tiroir

143480528
A77353: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-311-2589

4730-14-346-7853

4730-14-577-1834
Tube Swivel Joint

145771834
12 74 66: RNCC: 3 | RNVC: 2

20 Aug 2013

4730-14-328-4708

4730-14-344-5093

4730-14-314-1765

4730-14-405-0127
Ensemble Bride

144050127
1500292: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-378-7171

4730-14-504-5868
Tube To Gas Fitting Straight Adapter

145045868
01361017: RNCC: 3 | RNVC: 2

25 Feb 1998

4730-14-279-0548

Load More Results