What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 162 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 162 of 185

4730-14-423-5628
Bulkhead Hose Connector

144235628
F530-06810: RNCC: 3 | RNVC: 2

21 Apr 1988

4730-14-032-1531
Tube Fitting Clinch Sleeve

140321531
Q1-5D30S: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-274-6590
Tube-Hose Fitting Compression Sleeve

142746590
7062BA1BT1-14UE10R1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-338-7857
Quick Disconnect Coupling Half

143387857
NO PRIMARY REF14-338-7857: RNCC: 3 | RNVC: 2
220-65-70-66-76APM: RNCC: 5 | RNVC: 9
3502206676: RNCC: 5 | RNVC: 9

17 Dec 1976

4730-14-489-1835
Fluid-Emulsion Spray Nozzle

144891835
70781-7,6MM: RNCC: 3 | RNVC: 2
4400-22-A-F55-7,6MM: RNCC: 5 | RNVC: 2

2 Jul 1997

4730-14-566-5098
Self-Sealing Coupling Half

145665098
VKA3/10LCF: RNCC: 3 | RNVC: 2
B008359: RNCC: 5 | RNVC: 2
A231004000264: RNCC: 5 | RNVC: 2

22 Nov 2010

4730-14-352-7995
Tube Tee

143527995
Q0-1R20X16X20: RNCC: 3 | RNVC: 2
Q01R20X16X20: RNCC: 5 | RNVC: 2

14 Nov 1978

4730-14-238-5153
Fluid Passage Bolt

142385153
AQ51B12: RNCC: 3 | RNVC: 2
AQ5-1B12: RNCC: 5 | RNVC: 2
230668: RNCC: 5 | RNVC: 2
230668: RNCC: 5 | RNVC: 2
230668: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-489-8520
Quick Disconnect Coupling Half

144898520
ID 18956 13: RNCC: 3 | RNVC: 2
ID18956-13: RNCC: 5 | RNVC: 2

27 Aug 1997

4730-14-206-6418
Tube To Boss Straight Adapter

142066418
676-408-014-0: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-339-9890
Bouchon Guide

143399890
NO PRIMARY REF14-339-9890: RNCC: 3 | RNVC: 2
14077: RNCC: 5 | RNVC: 9
231107: RNCC: 5 | RNVC: 9

18 Jan 1977

4730-14-351-8083
Tube To Boss Straight Adapter

143518083
01050614: RNCC: 3 | RNVC: 2
556192: RNCC: 5 | RNVC: 2
556192-00: RNCC: 5 | RNVC: 2
1050614: RNCC: 5 | RNVC: 9

12 Sep 1978

4730-14-418-6527
Pipe Flange

144186527
E29203-01B-PN16DN50BF42N: RNCC: 2 | RNVC: 2
MEC10339: RNCC: 3 | RNVC: 2
RAR1392: RNCC: 5 | RNVC: 2
4730CJ-DN50: RNCC: 5 | RNVC: 2

9 Sep 1987

4730-14-447-7509
Pipe Flange

144477509
6784-2CG14: RNCC: 3 | RNVC: 9

29 May 1991

4730-14-283-1082
Tube To Boss Straight Adapter

142831082
52-12-18X150: RNCC: 3 | RNVC: 2
UML12X18-150N: RNCC: 3 | RNVC: 2
4L12-18X150: RNCC: 3 | RNVC: 2
ML12-18X1-5: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-379-0637
Fluid Pressure Line Multiple Connector

143790637
078-01-107: RNCC: 3 | RNVC: 2

6 Sep 1982

4730-14-426-7775
Tube Tee

144267775
4730HEING076,1X10-42,4X6,3: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-443-4073
Sediment Strainer Element

144434073
MAT573-0043F1: RNCC: 3 | RNVC: 2

21 Nov 1990

4730-14-417-5794
Tube To Hose Straight Adapter

144175794
MAT602-01-00: RNCC: 3 | RNVC: 2

16 Jul 1987

4730-14-342-2880
Tube Tee

143422880
LN324-061TYPEIV: RNCC: 3 | RNVC: 2
M10-74A4: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-263-7899
Support Inferieur

142637899
DLT002753: RNCC: 3 | RNVC: 2
DLT002753: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-395-1576
Raccord Equipe Bouc

143951576
A65035: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-561-7163
Tube To Boss Tee

145617163
EL22LMEDOMDCF: RNCC: 3 | RNVC: 2
EL22LMEDOMDCF: RNCC: 5 | RNVC: 9

25 Aug 2009

4730-14-576-0610
Flange To Flange Straight Adapter

145760610
M2821343920000: RNCC: 3 | RNVC: 2

28 May 2013

4730-14-559-9346
Tube Reducer

145599346
7400946602: RNCC: 3 | RNVC: 2
946602: RNCC: 5 | RNVC: 2

6 Mar 2009

4730-14-379-1368
Quick Disconnect Plug

143791368
BP4-07-61: RNCC: 3 | RNVC: 2
91540606: RNCC: 5 | RNVC: 2
91540606: RNCC: 5 | RNVC: 2

6 Sep 1982

4730-14-257-2081
Tube Tee

142572081
330A72-6181-20: RNCC: 3 | RNVC: 2
330A72-6181-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-389-6490
Quick Disconnect Coupling Assembly

143896490
LP012-2WR021: RNCC: 3 | RNVC: 9

20 Dec 1983

4730-14-492-1558
Tube To Boss Straight Adapter

144921558
0000155013: RNCC: 3 | RNVC: 2
F300 0T 007 0804: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-338-3351

4730-14-252-2163
Tube To Boss Straight Adapter

142522163
12117R: RNCC: 3 | RNVC: 2
12117R: RNCC: 5 | RNVC: 2
9560115670: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-329-0906

4730-14-317-0051

4730-14-430-4233
Purgeu Attelag Comp

144304233
25800365: RNCC: 3 | RNVC: 2
291700: RNCC: 5 | RNVC: 2

21 Mar 1989

4730-14-262-9964
Contre Bride Sortie

142629964
DLT007372: RNCC: 3 | RNVC: 2
DLT007372: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-376-7872
Multiple Raccord

143767872
DA2C781210: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-204-9166

4730-14-260-2915

4730-14-571-4165
Lubrication Fitting

145714165
5001830860: RNCC: 1 | RNVC: 2
1199N1860: RNCC: 3 | RNVC: 2

22 Mar 2012

4730-14-411-2317
Quick Disconnect Coupling Half

144112317
RBE08-6102: RNCC: 3 | RNVC: 2
8814650305: RNCC: 5 | RNVC: 2

6 Aug 1986

4730-14-209-1255
Raccord Equipe

142091255
NO PRIMARY REF14-209-1255: RNCC: 3 | RNVC: 2
215458: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-342-7079
Fluid Pressure Line Multiple Connector

143427079
FR9479-52: RNCC: 3 | RNVC: 2
52W1889-72: RNCC: 5 | RNVC: 2
22683-001: RNCC: 5 | RNVC: 2
22683-001: RNCC: 5 | RNVC: 2
FR9479-52: RNCC: 5 | RNVC: 2
FR9479-52: RNCC: 5 | RNVC: 9

16 May 1977

4730-14-468-1448
Fluid Pressure Line Multiple Connector

144681448
1400-957-02: RNCC: 3 | RNVC: 2
89296275: RNCC: 5 | RNVC: 2
714649: RNCC: 5 | RNVC: 2

9 Feb 1994

4730-14-408-7216
Quick Disconnect Coupling Half

144087216
H6-62W: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-381-1276
Fluid Pressure Line Multiple Connector

143811276
109-12-20X150NU: RNCC: 3 | RNVC: 2
P2-109-12-20X150NU: RNCC: 3 | RNVC: 2
36187: RNCC: 5 | RNVC: 2

25 Jan 1983

4730-14-425-4963
Quick Disconnect Coupling Half

144254963
70090006323A065: RNCC: 3 | RNVC: 2
70090006323A065: RNCC: 3 | RNVC: 9
9-65-6: RNCC: 5 | RNVC: 9

7 Jul 1988

4730-14-504-9678
Tube To Boss Straight Adapter

145049678
11-11-6-6: RNCC: 3 | RNVC: 2

11 Mar 1998

4730-14-446-4720
Tube Tee

144464720
0294401970: RNCC: 3 | RNVC: 2
302-296-902-0: RNCC: 5 | RNVC: 2

20 Mar 1991

4730-14-262-1582
Pipe Flange

142621582
7062DJ1F1M76-5-14CD2-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-274-2459
Lubrication Fitting

142742459
9204003: RNCC: 3 | RNVC: 2
9-20-40-03: RNCC: 5 | RNVC: 9
G61-6-100: RNCC: 5 | RNVC: 9
761407: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-362-9248
Tube To Boss Straight Adapter

143629248
12-8-8-13CYLNU: RNCC: 3 | RNVC: 2
UMA8-8X13NNU: RNCC: 3 | RNVC: 2
4A8-8-13CYLNU: RNCC: 3 | RNVC: 2
121511NU: RNCC: 3 | RNVC: 2
0024248406: RNCC: 5 | RNVC: 2
P2-12 8-8 13CYLN: RNCC: 5 | RNVC: 9
24248406: RNCC: 5 | RNVC: 9
0024248406: RNCC: 5 | RNVC: 9
24248406: RNCC: 6 | RNVC: 9
MAF0001004033: RNCC: 6 | RNVC: 9

19 Mar 1980

4730-14-379-3907
Tube To Boss Straight Adapter

143793907
NO PRIMARY REF14-379-3907: RNCC: 3 | RNVC: 2
345-70250-0: RNCC: 5 | RNVC: 9
345702500: RNCC: 5 | RNVC: 9

1 Oct 1982

4730-14-394-7137
Pipe Flange

143947137
M11-10-DE20: RNCC: 3 | RNVC: 2

28 Aug 1984

4730-14-416-3311
Pipe Flange

144163311
E29203-01A-PN16DN65Z3CND18-12: RNCC: 2 | RNVC: 2
E29203-01A-PN16DN65Z2CND17-12: RNCC: 5 | RNVC: 2
4730JEDN065: RNCC: 5 | RNVC: 2

3 Jun 1987

4730-14-318-9274
Tube To Gas Fitting Straight Adapter

143189274
A580-018: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-210-3614
Quick Disconnect Coupling Half

142103614
AQ-10F: RNCC: 3 | RNVC: 2
AQ10F: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-305-3627
Tube To Boss Straight Adapter

143053627
UMA25-30-150: RNCC: 3 | RNVC: 2
561048: RNCC: 5 | RNVC: 2
5156104800: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-328-9581
Tube Tee

143289581
Q1-5TR20X10X10NNNU: RNCC: 3 | RNVC: 2
TRK20X10X10NNU: RNCC: 3 | RNVC: 2
10RCA20X10X10NU: RNCC: 3 | RNVC: 2
GSM164-012F14: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-536-0924
Tube To Boss Straight Adapter

145360924
00-111-12-12: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-420-4974
Tube Tee

144204974
CTO-10-14X150: RNCC: 3 | RNVC: 2
CT0-10-14X150: RNCC: 5 | RNVC: 9
CT010-14X150: RNCC: 5 | RNVC: 9

10 Dec 1987

4730-14-538-8952
Quick Disconnect Reducer

145388952
NGM0023075020186: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-369-4427
Quick Disconnect Coupling Half

143694427
MF20: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-371-0465
Tube To Boss Straight Adapter

143710465
84011478: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-448-7177
Flange To Boss Straight Adapter

144487177
3ET59674: RNCC: 3 | RNVC: 2

8 Jul 1991

4730-14-277-7098
Tube Coupling Inverted Nut

142777098
13697: RNCC: 3 | RNVC: 2
01369777: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-409-3333
Fluid Pressure Line Multiple Connector

144093333
OMAG21N: RNCC: 3 | RNVC: 2
F300 0T 005 8044: RNCC: 6 | RNVC: 9

28 May 1986

4730-14-500-3425
Tube To Boss Straight Adapter

145003425
0009435150: RNCC: 3 | RNVC: 2
F300 0T 024 3514: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-436-8430
Hose Coupling Assembly

144368430
DA2C500052630: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-538-3550
Tube To Boss Straight Adapter

145383550
NGM0010036214824: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-484-3576
Tube To Hose Straight Adapter

144843576
01222219: RNCC: 3 | RNVC: 2
0122 22 19: RNCC: 5 | RNVC: 2
91741638: RNCC: 5 | RNVC: 2
91741638: RNCC: 5 | RNVC: 2

14 Nov 1996

4730-14-490-3585
Tube Fitting Brazing Ferrule

144903585
915003006206: RNCC: 3 | RNVC: 2

24 Sep 1997

4730-14-539-0121
Tube Coupling Assembly

145390121
NGM0057640000115: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-524-2917
Pipeline Flexible Spacer

145242917
23317000285: RNCC: 3 | RNVC: 2

9 Mar 2001

4730-14-550-6952
Tube Tee

145506952
PE66776TE061010: RNCC: 3 | RNVC: 2

6 Jul 2006

4730-14-504-3035
Tube-Pipe Fitting Kit

145043035
3700374M91: RNCC: 3 | RNVC: 2

11 Feb 1998

4730-14-317-8068
Tube Tee

143178068
300590: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-466-7305
Fluid Pressure Line Multiple Connector

144667305
13A16NU: RNCC: 3 | RNVC: 2
21300016NU: RNCC: 5 | RNVC: 2
5005030912: RNCC: 5 | RNVC: 2

24 Nov 1993

4730-14-397-0296
Fluid Pressure Line Multiple Connector

143970296
31180813: RNCC: 3 | RNVC: 2
24267408: RNCC: 5 | RNVC: 2
2426740840: RNCC: 5 | RNVC: 2

1 Dec 1984

4730-14-267-2543
Tube Tee

142672543
29517: RNCC: 3 | RNVC: 2
29517: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-505-6713
Tube-Hose Fitting Compression Sleeve

145056713
DPR14SX: RNCC: 3 | RNVC: 2
DPR14-S: RNCC: 5 | RNVC: 2

26 Mar 1998

4730-14-496-3676
Fluid Pressure Line Multiple Connector

144963676
182785: RNCC: 3 | RNVC: 2
F300 0T 021 4533: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-452-5642
Pipe Flange

144525642
LN320033DN250EXT267: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-340-4250
Tube To Boss Straight Adapter

143404250
0000251590: RNCC: 3 | RNVC: 2

14 Feb 1977

4730-14-494-8845
Fluid Pressure Line Multiple Connector

144948845
L352001: RNCC: 3 | RNVC: 2
5419958: RNCC: 5 | RNVC: 2
DBAL352001: RNCC: 5 | RNVC: 9
F300 0T 018 0391: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-415-8377
Pipeline Flexible Spacer

144158377
DILAT0FLEXNT25HHPN10: RNCC: 3 | RNVC: 9

21 May 1987

4730-14-496-5489
Tube To Boss Straight Adapter

144965489
T5279690: RNCC: 3 | RNVC: 2
F300 0T 021 6542: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-226-9394
Tube Fitting Brazing Ferrule

142269394
17462: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-442-6987
Hose To Gas Fitting Straight Adapter

144426987
91480518: RNCC: 1 | RNVC: 2
01361021: RNCC: 3 | RNVC: 2

24 Oct 1990

4730-14-417-6133
Garden Hose Nozzle

144176133
1451-15A20CONIQUE: RNCC: 3 | RNVC: 2

21 Jul 1987

4730-14-206-6722
Fluid Passage Bolt

142066722
0000125383: RNCC: 3 | RNVC: 2
0000125383: RNCC: 5 | RNVC: 9
125383: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-545-6010
Bulkhead Hose Connector

145456010
E65109000008: RNCC: 3 | RNVC: 2

25 Apr 2005

4730-14-525-6271
Tube To Boss Straight Adapter

145256271
20 236 910 9180: RNCC: 3 | RNVC: 2
236-910-9180: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-307-8450
Tubulure Speciale

143078450
B252FD1BREP9: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-565-7382
Tube Elbow

145657382
5005030127: RNCC: 3 | RNVC: 2
25312040: RNCC: 5 | RNVC: 2

20 Sep 2010

4730-14-209-1225

4730-14-256-7600

4730-14-269-2104

4730-14-206-0957
Raccord Special Pou

142060957
058580: RNCC: 3 | RNVC: 2
M058580: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-212-1478
Tube Coupling Assembly

142121478
0-3951SB20X20X16A: RNCC: 3 | RNVC: 2
0-3951SB20X20X16A: RNCC: 5 | RNVC: 9
85-691-3821: RNCC: 6 | RNVC: 9

5 Jul 1980

4730-14-211-3654
Ecrouraccord

142113654
D2604-2-117: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-216-4181

4730-14-565-7049
Fluid Pressure Line Multiple Connector

145657049
5005430310: RNCC: 1 | RNVC: 2
98600502: RNCC: 3 | RNVC: 2
25312776: RNCC: 5 | RNVC: 2

16 Sep 2010

4730-14-346-5956
Bride Speciale

143465956
2-16398: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-417-3256
Raccord De Sortie P

4730-14-572-8819
Hose Clamp

145728819
ABA 12MM 106-138 S40: RNCC: 3 | RNVC: 2
91888920: RNCC: 5 | RNVC: 2
ABA 12MM 106-138 S40: RNCC: 5 | RNVC: 2
ABA 12MM 106-138 S40: RNCC: 5 | RNVC: 9

22 Aug 2012

4730-14-339-9699
Tube Tee

143399699
GSM163-017F7: RNCC: 3 | RNVC: 2
GSM163-17F7: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-224-3909
Tube Fitting Brazing Ferrule

142243909
GSM163-002DETHF: RNCC: 3 | RNVC: 2
GSM163-02DETHF: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-394-5798
Self-Sealing Coupling Assembly

143945798
RBE8-11520D-HP: RNCC: 3 | RNVC: 2

28 Aug 1984

4730-14-294-9378
Tube To Boss Straight Adapter

142949378
GSM164-039F22: RNCC: 3 | RNVC: 2
GSM164-005F23: RNCC: 5 | RNVC: 2
411MA470REP7: RNCC: 5 | RNVC: 2
GSM164-05F23: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-357-1107
Quick Disconnect Coupling Half

143571107
H4-63: RNCC: 3 | RNVC: 2
H4-63BSPP: RNCC: 5 | RNVC: 2

7 Jun 1979

4730-14-470-5184
Tube Coupling

144705184
520 1235-1SON: RNCC: 3 | RNVC: 2
1067647Y00: RNCC: 5 | RNVC: 2

22 Jun 1994

4730-14-471-8530
Tube To Boss Straight Adapter

144718530
5A6L-10X100: RNCC: 3 | RNVC: 2
5005030504: RNCC: 5 | RNVC: 2
105124093: RNCC: 5 | RNVC: 2

21 Sep 1994

4730-14-536-5142
Bulkhead Hose Connector

145365142
PZC-A266: RNCC: 3 | RNVC: 2
PZC-A266: RNCC: 5 | RNVC: 9
EN098886: RNCC: 6 | RNVC: 9

28 Aug 2003

4730-14-345-2099
Fluid Pressure Line Multiple Connector

143452099
GA29507: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-494-5504
Tube To Boss Straight Adapter

144945504
643 445 102: RNCC: 3 | RNVC: 2
F300 0T 017 4682: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-454-5593
Quick Disconnect Coupling Half

144545593
1000-526: RNCC: 3 | RNVC: 2

7 Apr 1992

4730-14-427-4308
Tube To Gas Fitting Straight Adapter

144274308
361091: RNCC: 3 | RNVC: 2
AS06040000B59UO: RNCC: 5 | RNVC: 2

19 Oct 1988

4730-14-553-4810
Flange To Boss Elbow

145534810
0319710380: RNCC: 3 | RNVC: 2

5 Apr 2007

4730-14-350-4335
Bulkhead Hose Connector

143504335
207611: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-261-7875

4730-14-314-2172

4730-14-440-2178
Air Hose Connector

144402178
EC6-1/4: RNCC: 3 | RNVC: 2
EC6-1-4: RNCC: 5 | RNVC: 2
EC6-1-4C0: RNCC: 5 | RNVC: 2
91484020: RNCC: 5 | RNVC: 2

11 Jul 1990

4730-14-465-7696
Pipeline Flexible Spacer

144657696
6110648010: RNCC: 3 | RNVC: 2
Z00.N7511290303: RNCC: 5 | RNVC: 2
611-064-8010: RNCC: 5 | RNVC: 9

14 Oct 1993

4730-14-204-3622
Tube To Boss Swivel Joint

142043622
0202000660: RNCC: 3 | RNVC: 2
202-00-066: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-218-8403
Fluid Pressure Line Multiple Connector

142188403
509-14NN: RNCC: 3 | RNVC: 2
946755914C0MPLET: RNCC: 5 | RNVC: 9
0946755914: RNCC: 5 | RNVC: 9
946755914: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-362-2674
Tube To Boss Straight Adapter

143622674
42-10-12-17: RNCC: 3 | RNVC: 2

30 Oct 2001

4730-14-335-9359
Tube To Boss Straight Adapter

143359359
R12-6-18X150: RNCC: 3 | RNVC: 2
RA12-6-18X150: RNCC: 5 | RNVC: 2

24 Jul 1976

4730-14-369-6348
Tube Coupling

143696348
RBP06-6809: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-260-9842
Tube Coupling Assembly

142609842
3951S40X32X40A: RNCC: 3 | RNVC: 2
3951S40X32X40A: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-551-2361
Flange To Hose Straight Adapter

145512361
RA1M525001110: RNCC: 3 | RNVC: 2

6 Sep 2006

4730-14-421-7746
Fluid Passage Bolt

144217746
43312AD080LE: RNCC: 2 | RNVC: 2
44310: RNCC: 5 | RNVC: 9

27 Jan 1988

4730-14-345-2332
Bulkhead Hose Connector

143452332
A11A231352012: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-385-1956
Raccord Debr Etrier

143851956
276-8: RNCC: 3 | RNVC: 2
65036: RNCC: 5 | RNVC: 9

26 Jul 1983

4730-14-311-5820

4730-14-475-4885
Self-Sealing Coupling Assembly

144754885
C 1800 G21 10: RNCC: 3 | RNVC: 2
5800-G21-10: RNCC: 5 | RNVC: 9

12 Apr 1995

4730-14-277-5542
Quick Disconnect Coupling Half

142775542
9959501: RNCC: 3 | RNVC: 2
VDP5066-2: RNCC: 5 | RNVC: 2
VDPM02942: RNCC: 5 | RNVC: 2
5601810: RNCC: 5 | RNVC: 2
9-95-95-01: RNCC: 5 | RNVC: 9
5601-8-10: RNCC: 5 | RNVC: 9
9959501: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-308-5160
Bride Pour Tube

143085160
A85859: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-263-0851

4730-14-428-5116
Equipe Demi-Raccord

144285116
NO PRIMARY REF14-428-5116: RNCC: 3 | RNVC: 2
45449: RNCC: 5 | RNVC: 9

8 Dec 1988

4730-14-459-3027
Tube Coupling

144593027
36-183-708L6: RNCC: 3 | RNVC: 2
RAR1611: RNCC: 5 | RNVC: 2

24 Nov 1992

4730-14-214-6347
Ecrou Raccord Speci

142146347
2142-01: RNCC: 3 | RNVC: 2
2142-01: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-209-1269
Raccord Orientable

142091269
NO PRIMARY REF14-209-1269: RNCC: 3 | RNVC: 2
216082: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-302-9939
Tube To Boss Straight Adapter

143029939
7062BB1B1966VCTT2-48UA9C337: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-344-6300
Raccord Orientable

143446300
P4ES109-54TF: RNCC: 3 | RNVC: 2
T0U90464: RNCC: 5 | RNVC: 2

9 Sep 1977

4730-14-202-5312
Tube-Hose Fitting Compression Sleeve

142025312
R5014: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-461-4790
Tube Coupling

144614790
31200600: RNCC: 3 | RNVC: 2
91648448: RNCC: 5 | RNVC: 2
50053300003: RNCC: 5 | RNVC: 2

10 Mar 1993

4730-14-541-9145
Tube To Boss Straight Adapter

145419145
8201L08 17: RNCC: 3 | RNVC: 2

2 Jul 2004

4730-14-213-5818
Tube Coupling Assembly

142135818
3601S40A: RNCC: 3 | RNVC: 2
3601K40A: RNCC: 5 | RNVC: 9
3601S40A: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-230-5957
Tube Tee

142305957
300749: RNCC: 3 | RNVC: 2
800749: RNCC: 3 | RNVC: 2
S300749: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-541-8164
Tube Coupling

145418164
3050.10.17: RNCC: 3 | RNVC: 2
LX1148A00: RNCC: 5 | RNVC: 2

26 Jun 2004

4730-14-465-4077
Hydraulic Swivel Joint

144654077
HA05010000: RNCC: 3 | RNVC: 2
18007200037: RNCC: 5 | RNVC: 2

28 Sep 1993

4730-14-287-0506
Pipe Flange

142870506
B252FD7CREP1: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-032-3080
Tube To Boss Straight Adapter

140323080
8401259166: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-500-6908
Tube To Boss Straight Adapter

145006908
RI1X3-4-A3C: RNCC: 3 | RNVC: 2
RI1X3-4A3C: RNCC: 3 | RNVC: 2
F300 0T 024 7099: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-499-2615
Tube To Boss Straight Adapter

144992615
6DL6-1-4FMANO: RNCC: 3 | RNVC: 2
6DL6 1-4F: RNCC: 3 | RNVC: 9
606151092: RNCC: 5 | RNVC: 2
A07051753: RNCC: 5 | RNVC: 2
A07051753: RNCC: 5 | RNVC: 9
F300 0T 020 4997: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-303-1972
Bulkhead Hose Connector

143031972
A10-50-321-01-0: RNCC: 3 | RNVC: 2
A10-50-321-01-0: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-454-3174
Tube Tee

144543174
502-515-250-0: RNCC: 3 | RNVC: 2

26 Mar 1992

4730-14-408-1576
Quick Disconnect Coupling Half

144081576
MR4-2806-9-0DIBFBSP: RNCC: 3 | RNVC: 2

19 Mar 1986

4730-14-265-9495
Threaded Tube Fitting Plug

142659495
631X2101: RNCC: 3 | RNVC: 2
P2-4-631X2101: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-446-9802
Tube To Boss Straight Adapter

144469802
LL118-CK2008S: RNCC: 3 | RNVC: 2

23 Apr 1991

4730-14-550-1073
Tube Tee

145501073
GS47054-100: RNCC: 3 | RNVC: 2

1 Jun 2006

4730-14-284-9614
Tube To Boss Straight Adapter

142849614
UMA20X15-21N: RNCC: 3 | RNVC: 2
12-20-15-21CYL: RNCC: 3 | RNVC: 2
4A20-15-21CYL: RNCC: 3 | RNVC: 2
M20-21: RNCC: 3 | RNVC: 2
91788351: RNCC: 5 | RNVC: 2
310896: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-302-9923
Tube To Boss Straight Adapter

143029923
7062BB1B1966VCTT1-10UA9C337: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-525-8746
Tube To Boss Straight Adapter

145258746
1832T-18-127-48: RNCC: 3 | RNVC: 2

15 Jun 2001

4730-14-382-3565
Quick Disconnect Coupling Half

143823565
MR41904: RNCC: 3 | RNVC: 2
MR4-1904: RNCC: 3 | RNVC: 2
MRA04-1904: RNCC: 5 | RNVC: 2
41904: RNCC: 5 | RNVC: 2
MR04-1904: RNCC: 5 | RNVC: 2

17 Feb 1983

4730-14-346-4952
Tube To Boss Straight Adapter

143464952
LAT846: RNCC: 3 | RNVC: 2
85-689-6225: RNCC: 6 | RNVC: 9

12 Dec 1977

4730-14-495-9561
Tube To Boss Straight Adapter

144959561
4DL12-16X150B: RNCC: 3 | RNVC: 2
4DL12-16X150B: RNCC: 3 | RNVC: 9
604114188: RNCC: 5 | RNVC: 2
A07050243: RNCC: 5 | RNVC: 2
A07050243: RNCC: 5 | RNVC: 9
A07050243: RNCC: 5 | RNVC: 9
6F300 0T 018 3136: RNCC: 6 | RNVC: 9
F300 0T 020 6038: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-268-1189
Pipe Flange

142681189
6784-1DD80: RNCC: 2 | RNVC: 2
MEC11411: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-372-9484
Bulkhead Hose Connector

143729484
79081107: RNCC: 3 | RNVC: 2
79081107: RNCC: 5 | RNVC: 9
85-691-7166: RNCC: 6 | RNVC: 9

21 Sep 1981

4730-14-381-2855
Fluid Pressure Line Multiple Connector

143812855
109-10-16X150NU: RNCC: 3 | RNVC: 2
13A10-16X150NU: RNCC: 3 | RNVC: 2
13A10-16X150NU: RNCC: 3 | RNVC: 9
109-10-16-150NU: RNCC: 5 | RNVC: 2
EMDAS05391: RNCC: 5 | RNVC: 2

25 Jan 1983

4730-14-351-4733
Bulkhead Hose Connector

143514733
5001587-000: RNCC: 3 | RNVC: 2

12 Sep 1978

4730-14-423-4763
Pipe Flange

144234763
UA50088006PN100-11LSFDN40: RNCC: 2 | RNVC: 2
4730HCPN100DN04011LSF: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-516-5480
Housse Antifeu

145165480
MN-25P16NTM: RNCC: 3 | RNVC: 2
99/339/001/REVB/DN25: RNCC: 3 | RNVC: 2
99/339/001BDN25: RNCC: 3 | RNVC: 2

4 Oct 1999

4730-14-408-4395
Tube To Boss Straight Adapter

144084395
Q15GE20S3/4BSPNU: RNCC: 3 | RNVC: 2
8401202766NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-361-6420
Tube To Boss Straight Adapter

143616420
4DM6-5-10C0: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-565-1078
Hydraulic Manifold Installation Kit

145651078
E19517: RNCC: 3 | RNVC: 2

9 Jul 2010

4730-14-411-5435
Coude Union

144115435
520192: RNCC: 3 | RNVC: 2

20 Aug 1986

4730-14-362-7228
Tube Coupling

143627228
0141-405-200: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-295-4264
Swivel Retaining Pipe Flange

142954264
A30791: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-268-6650
Demi-Raccord A Demo

142686650
1317-4-168: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-260-9158
Pipe Flange

142609158
7062CC1F1F30AF42-2: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-405-4434
Tube Coupling

144054434
CB2A22-1: RNCC: 3 | RNVC: 9

27 Nov 1985

4730-14-416-9079
Bulkhead Hose Connector

144169079
F530-06-03: RNCC: 3 | RNVC: 2

25 Jun 1987

4730-14-357-0928
Quick Disconnect Plug

143570928
RBE6-8500IA: RNCC: 3 | RNVC: 2
2428133540: RNCC: 5 | RNVC: 2
2428133540: RNCC: 5 | RNVC: 9

7 Jun 1979

4730-14-423-4748
Pipe Flange

144234748
UA50088006PN100-11LSPDN25: RNCC: 2 | RNVC: 2
4730HCPN100DN02511LSP: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-309-4261
Tube Coupling

143094261
102PL6-8X6-8LAIT0N: RNCC: 3 | RNVC: 2
0946737031: RNCC: 5 | RNVC: 2
946737031: RNCC: 5 | RNVC: 9
0946737031: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-486-3479
Hose To Boss Straight Adapter

144863479
J23375-90: RNCC: 3 | RNVC: 2
P23375-90J: RNCC: 5 | RNVC: 2

12 Mar 1997

4730-14-324-1299
Tube To Boss Straight Adapter

143241299
Q1-52-10-20X150: RNCC: 3 | RNVC: 2
UMK10X20-150N: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-562-6026
Pipeline Flexible Spacer

145626026
R1/32/KR 320-WG/P: RNCC: 3 | RNVC: 2

6 Nov 2009

4730-14-405-1212
Tube To Boss Straight Adapter

144051212
UML6 1-2NPT: RNCC: 3 | RNVC: 9

20 Nov 1985

4730-14-316-2202
Tube To Boss Straight Adapter

143162202
611-113-003-0: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-457-8011
Pipe Flange

144578011
4730JADN200-11B2S: RNCC: 2 | RNVC: 2

24 Sep 1992

4730-14-376-3521
Tube To Boss Straight Adapter

143763521
Q1-5GE10LM10X100EQUIPE: RNCC: 3 | RNVC: 2
052: RNCC: 5 | RNVC: 9
Q1-5GE10LM10X100EQUIPE: RNCC: 5 | RNVC: 9

30 Mar 1982

4730-14-460-4398
Quick Disconnect Coupling Half

144604398
N001-218-88: RNCC: 3 | RNVC: 2

26 Jan 1993

4730-14-031-1501
Tube To Boss Straight Adapter

140311501
9114202851: RNCC: 3 | RNVC: 2
9414202858: RNCC: 5 | RNVC: 2
VDP4684: RNCC: 5 | RNVC: 2
A4-20-15-21-51: RNCC: 5 | RNVC: 9

14 Jun 1980

4730-14-423-4604
Pipe Flange

144234604
UA50088006PN250-11B2SDN65: RNCC: 2 | RNVC: 2
4730HCPN250DN06511B2S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-410-7722
Quick Disconnect Coupling Half

144107722
RBO06-1809/IA: RNCC: 3 | RNVC: 2
RB06-1809IA: RNCC: 5 | RNVC: 2

9 Jul 1986

4730-14-398-5834
Tube Tee

143985834
GSM164-050F3: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-485-0832
Essai Etanc Raccord

144850832
12-851653-100: RNCC: 3 | RNVC: 2

21 Dec 1996

4730-14-424-5482
Quick Disconnect Coupling Half

144245482
RBE06-1151/0D/IC/FB: RNCC: 3 | RNVC: 2

27 May 1988

4730-14-222-6552
Tube Fitting Brazing Ferrule

142226552
GSM1297F1AF1BTABLEAU2D1-25I14: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-331-5821
Tube To Boss Straight Adapter

143315821
91051418: RNCC: 3 | RNVC: 2
A2-14-12-17BR: RNCC: 5 | RNVC: 9
A2-14-12-17: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-278-9567
Quick Disconnect Coupling Half

142789567
E29-561-90LISSE: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-277-2829
Tube To Boss Straight Adapter

142772829
Q1-52-40-33X42CYL: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-434-3708
Tube Tee

144343708
332A22-1134-00: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-423-4756
Pipe Flange

144234756
UA50088006PN100-11LSPDN100: RNCC: 2 | RNVC: 2
4730HCPN100DN10011LSP: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-378-1229
Quick Disconnect Coupling Half

143781229
106056201: RNCC: 3 | RNVC: 2
6055F3-2H: RNCC: 5 | RNVC: 2

20 Jul 1982

4730-14-391-6463
Quick Disconnect Coupling Half

143916463
RBE06-2101: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-413-4681
Quick Disconnect Coupling Half

144134681
RBE08-6152/IC: RNCC: 3 | RNVC: 2
RBE08-6152IC: RNCC: 5 | RNVC: 2

17 Dec 1986

4730-14-336-4290
Tube Tee

143364290
R06L0808S: RNCC: 3 | RNVC: 2
R6LX8X8S: RNCC: 5 | RNVC: 2

24 Jul 1976

4730-14-328-7914
Fluid Pressure Line Multiple Connector

143287914
0000301170: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-224-9162
Tube Tee

142249162
1TR10X6X10: RNCC: 3 | RNVC: 2
14RR2A1C2A: RNCC: 3 | RNVC: 2
TRA10X6X10: RNCC: 3 | RNVC: 2
10RA10X6X10: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-527-3718
Tube To Boss Straight Adapter

145273718
H102372A: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-428-7217
Pipe Flange

144287217
01-2524B: RNCC: 3 | RNVC: 2

14 Dec 1988

4730-14-525-5019
Pipe Flange

145255019
A88140238: RNCC: 3 | RNVC: 2

6 Jun 2001

4730-14-214-4048
Tube Tee

142144048
R10X6X12: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-267-4536
Sediment Strainer Element

142674536
30029A: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-358-5991
Bulkhead Hose Connector

143585991
410980: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-382-8743
Tube To Boss Straight Adapter

143828743
PE60835H05: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-527-4043
Tube To Boss Straight Adapter

145274043
H77753: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-379-1425
Tube To Boss Straight Adapter

143791425
8811636009: RNCC: 3 | RNVC: 2

6 Sep 1982

4730-14-465-6606
Fluid Flow Restrictor

144656606
CR71140: RNCC: 3 | RNVC: 2

6 Oct 1993

4730-14-362-3662
Fluid Pressure Line Multiple Connector

143623662
65997: RNCC: 3 | RNVC: 9

19 Mar 1980

4730-14-515-4431
Tube To Boss Straight Adapter

145154431
TTK8FJ916: RNCC: 3 | RNVC: 2
SOATTK8FJ916: RNCC: 5 | RNVC: 9

13 Jul 1999

4730-14-355-5338
Tube Coupling Assembly

143555338
3951SB32X25X32A: RNCC: 3 | RNVC: 2
3951SB32X25X32A: RNCC: 5 | RNVC: 9

19 Mar 1979

4730-14-570-8164
Spool Piece

145708164
600065: RNCC: 3 | RNVC: 2

25 Jan 2012

4730-14-503-1747
Bulkhead Hose Connector

145031747
RA1M534303170: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-462-0029
Fluid Flow Restrictor

144620029
A87247: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-361-8518
Tube Tee

143618518
R7708Z46: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-394-1527
Tube-Hose Fitting Compression Sleeve

143941527
LL023-NS40S: RNCC: 3 | RNVC: 2
84244002: RNCC: 5 | RNVC: 2

23 Jun 1984

4730-14-042-8107
Fluid Pressure Line Multiple Connector

140428107
F102277: RNCC: 3 | RNVC: 2
1004856D00: RNCC: 5 | RNVC: 2
89254872: RNCC: 5 | RNVC: 2

11 Dec 1980

4730-14-409-3409
Tube To Boss Straight Adapter

144093409
530031: RNCC: 3 | RNVC: 2

28 May 1986

4730-14-353-5954
Fluid Pressure Line Multiple Connector

143535954
FT23W: RNCC: 3 | RNVC: 2
010513M: RNCC: 5 | RNVC: 2

16 Jan 1979

4730-14-374-1139
Tube Tee

143741139
JTXS10: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-361-1911
Fluid Passage Bolt

143611911
6557: RNCC: 3 | RNVC: 2
6557J: RNCC: 5 | RNVC: 2

24 Jan 1980

4730-14-374-6226
Tube Coupling

143746226
HRAB12: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-525-6323
Tube Tee

145256323
20 236 915 4120: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-321-5000
Pipe Flange

143215000
C11336B: RNCC: 3 | RNVC: 2
C11336: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-392-4628
Tube To Hose Straight Adapter

143924628
CBMB6-1/4: RNCC: 3 | RNVC: 2
CBMB6-1/4: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-454-8146
Liaison Rampe Deten

144548146
0993.0710: RNCC: 3 | RNVC: 2
SAF0993.0710: RNCC: 5 | RNVC: 9

22 Apr 1992

4730-14-569-5721
Tube To Boss Straight Adapter

145695721
FJ 9/16 - MG 3/8 CYL: RNCC: 3 | RNVC: 2
18628: RNCC: 5 | RNVC: 2

28 Sep 2011

4730-14-291-0075
Tube To Boss Straight Adapter

142910075
Q1-52-8-10X100: RNCC: 3 | RNVC: 2
UMK8X10-100N: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-381-9486
Dust And Moisture Protective Cap

4730-14-206-1013

4730-14-373-0749

4730-14-242-2132

4730-14-575-7699
Flange To Tube Elbow

145757699
M2811343000100: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-576-4358
Tube Elbow

145764358
ABS2103G16: RNCC: 1 | RNVC: 2
ABS2103G16: RNCC: 3 | RNVC: 2
ABS2103G16: RNCC: 5 | RNVC: 2

19 Jun 2013

4730-14-300-5106

4730-14-345-1925
Membrane Equipee

143451925
FB1A580-10810: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-364-7529
Embout Cannele

143647529
BF000300: RNCC: 3 | RNVC: 2
BF0003: RNCC: 5 | RNVC: 2

2 Sep 1980

4730-14-262-1635

4730-14-293-2918

4730-14-489-8285
Hydraulic System Accessories Manifold

144898285
E5330062: RNCC: 3 | RNVC: 9

22 Aug 1997

4730-14-448-4081

4730-14-306-7530
Raccord Special Ver

143067530
C53948: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-262-1798

4730-14-323-9195

4730-14-367-7590

4730-14-333-3094
Raccord Sur Parcour

143333094
AS34TV135F9A: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-032-1586
Contre Bride

140321586
CMT30E9030AF5ET6DE14REP3: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-308-4852

4730-14-576-8235
Flange Elbow

145768235
M4821341820000: RNCC: 3 | RNVC: 2

17 Jul 2013

4730-14-434-6974
Adaptateur Bride

144346974
BN329515D2DN100INOX: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-385-7104
Tube Union

143857104
340GCU14 3-4: RNCC: 3 | RNVC: 2
340GC14 3-4: RNCC: 3 | RNVC: 9

26 Jul 1983

4730-14-334-2545
Tube Tee

143342545
GSM163-017F46: RNCC: 3 | RNVC: 2
GSM163-17F46: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-242-7967
Swivel Retaining Pipe Flange

142427967
7062CA1F1-57UA10: RNCC: 3 | RNVC: 9

1 Jan 1967

4730-14-361-6952
Tube To Boss Straight Adapter

143616952
5134-20-09: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-041-2439
Tube To Boss Straight Adapter

140412439
53-14-12-17: RNCC: 3 | RNVC: 2
UFL14X12-17: RNCC: 3 | RNVC: 2
6L14-12-17: RNCC: 3 | RNVC: 2
UFL14-17: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-550-8709
Tube Tee

145508709
TR30/25/30SCFX: RNCC: 3 | RNVC: 2
5010650043: RNCC: 5 | RNVC: 2

25 Jul 2006

4730-14-306-2568
Quick Disconnect Coupling Half

143062568
NO PRIMARY REF14-306-2568: RNCC: 3 | RNVC: 2
QSL3-4: RNCC: 5 | RNVC: 2
QSL3-4: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-256-0564
Raccord Vabco

142560564
UMB10-1-4BUA9M2: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-544-6265
Tube To Boss Straight Adapter

145446265
6199792000: RNCC: 3 | RNVC: 2
AA16X20-27S: RNCC: 5 | RNVC: 2
071137016020027: RNCC: 5 | RNVC: 2

14 Feb 2005

4730-14-391-3399
Pipe Flange

143913399
E64-35-3200-122EF9-23ETF10-23DN-: RNCC: 3 | RNVC: 1

1 Mar 1984

4730-14-429-3726
Fluid Passage Bolt

144293726
755-2066: RNCC: 3 | RNVC: 2

18 Jan 1989

4730-14-567-3229
Flange Elbow

145673229
M4721307200000: RNCC: 3 | RNVC: 2

7 Mar 2011

4730-14-221-7253

4730-14-297-3198

4730-14-260-9244

4730-14-568-9612
Swivel Flange To Tube Elbow

145689612
CSET1515: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-265-9592

4730-14-554-2160
Tube Union

145542160
357 002: RNCC: 3 | RNVC: 2
357 002: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-14-485-2792
Hose Coupling Assembly

144852792
3701S50X40A: RNCC: 3 | RNVC: 2
4730AA0012276: RNCC: 6 | RNVC: 9

15 Jan 1997

4730-14-306-8674
Raccord Jauge

143068674
NO PRIMARY REF14-306-8674: RNCC: 3 | RNVC: 2
157323: RNCC: 5 | RNVC: 9

3 May 2000

4730-14-572-2390
Pipe Elbow Assembly

145722390
AMPC GENE E 290135: RNCC: 3 | RNVC: 2

18 Jun 2012

4730-14-555-8773
Boss Outlet

145558773
0292450420: RNCC: 3 | RNVC: 2

20 Dec 2007

4730-14-334-5090

4730-14-409-4105
Fluid Passage Bolt

144094105
3030105: RNCC: 3 | RNVC: 2
3028011: RNCC: 5 | RNVC: 2

28 May 1986

4730-14-395-3775
Tube To Boss Straight Adapter

143953775
N0189F46B: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-477-9373
Tube Fitting Flared Sleeve

144779373
01272015: RNCC: 3 | RNVC: 2
0127 20 15: RNCC: 5 | RNVC: 2
127 20 15: RNCC: 5 | RNVC: 2
1272015: RNCC: 5 | RNVC: 2

4 Oct 1995

4730-14-548-2841
Tube To Boss Straight Adapter

145482841
EGE20SREDA3C: RNCC: 3 | RNVC: 2

3 Jan 2006

4730-14-222-5448
Fluid Passage Bolt

142225448
0000453398: RNCC: 3 | RNVC: 2
0000453398: RNCC: 5 | RNVC: 9
453398: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-502-8723
Lubricant Pressure Relief Fitting

145028723
9T0655: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-505-3347
Tube Union

145053347
GE12-PL-7-8-14UNF-0MD: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-327-0973
Raccord Diaphragme

143270973
319A73-30-503: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-254-2776

4730-14-474-0094
Tube Union

144740094
FLEX1L60,3PN16PDM/INOX: RNCC: 3 | RNVC: 2
STRAUB-FLEX1L60,3EPDM/INOX: RNCC: 5 | RNVC: 2
190 0601: RNCC: 5 | RNVC: 9

23 Jan 1995

4730-14-258-5626
Raccord De Canalisa

142585626
590573: RNCC: 3 | RNVC: 9

1 Jan 1969

4730-14-559-3505
Tube To Hose Straight Adapter

145593505
E66501620005: RNCC: 3 | RNVC: 2

19 Dec 2008

4730-14-274-8628

4730-14-378-6524

4730-14-527-1942
Quick Disconnect Coupling Half

145271942
AR0B12F: RNCC: 3 | RNVC: 2

10 Oct 2001

4730-14-521-2599
Quick Disconnect Reducer

145212599
1823391363: RNCC: 3 | RNVC: 2
SYB0990: RNCC: 5 | RNVC: 2

13 Jul 2000

4730-14-261-7704
Tube Tee

142617704
TL14: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-374-4457
Pipe Flange

143744457
065-30-9013PL3AREP2: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-426-6556
Tube To Hose Straight Adapter

144266556
16BGE: RNCC: 3 | RNVC: 9

15 Sep 1988

4730-14-332-5515
Bulkhead Hose Connector

143325515
F10A705200380: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-537-7867
Fluid Flow Restrictor

145377867
823218011: RNCC: 3 | RNVC: 2

25 Nov 2003

4730-14-493-3206
Tube-Hose Fitting Compression Sleeve

144933206
95-000-340: RNCC: 3 | RNVC: 2
4222: RNCC: 5 | RNVC: 9
F300 0T 012 1940: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-391-8926
Racco Clapet Equipe

143918926
434-010: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-417-7867
Tube Tee

144177867
ST2069DN25-20Z2CND17-12-02: RNCC: 2 | RNVC: 2

22 Jul 1987

4730-14-247-4012
Union

142474012
8GAZCY8-10XG1-4: RNCC: 3 | RNVC: 2
8GAZCY8-10XG1-4: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-247-9872
Partie Mobile Racco

142479872
A24350M1: RNCC: 3 | RNVC: 2
91372248: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-392-9356
Tube To Boss Straight Adapter

143929356
0024248625: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-304-8156
Tube-Hose Fitting Compression Sleeve

143048156
NO PRIMARY REF14-304-8156: RNCC: 3 | RNVC: 2
20003: RNCC: 5 | RNVC: 9
85-686-2950: RNCC: 6 | RNVC: 9

1 Jan 1974

4730-14-374-1143
Tube Tee

143741143
JTXS6: RNCC: 3 | RNVC: 2
920057600: RNCC: 5 | RNVC: 2
3145629: RNCC: 5 | RNVC: 2

8 Dec 1981

4730-14-568-9277
Tube Elbow

145689277
CS15: RNCC: 3 | RNVC: 2

21 Jul 2011

4730-14-562-1897
Hose Tee

145621897
3104 06 08: RNCC: 3 | RNVC: 2
FS0002473: RNCC: 6 | RNVC: 9

6 Oct 2009

4730-14-333-5327
Exhaust-Intake Pneumatic Muffler

143335327
AX1/4: RNCC: 3 | RNVC: 9
50322AM: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-215-9694
Raccord A Souder Dr

142159694
310: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-405-4449
Tube Coupling

144054449
CB3A16 3/4: RNCC: 3 | RNVC: 9

27 Nov 1985

4730-14-356-6874

4730-14-202-6511

4730-14-214-4851

4730-14-556-9884
Hose Clamp

145569884
002429: RNCC: 3 | RNVC: 2

25 Apr 2008

4730-14-562-6032
Pipeline Flexible Spacer

145626032
R1/50/KR 320-WG/E: RNCC: 3 | RNVC: 2

6 Nov 2009

4730-14-446-4718
Tube Tee

144464718
0294401740: RNCC: 3 | RNVC: 2
302-296-901-0: RNCC: 5 | RNVC: 2

20 Mar 1991

4730-14-550-4154
Threaded Tube Fitting Plug

145504154
9996666: RNCC: 3 | RNVC: 2
9996666-5: RNCC: 5 | RNVC: 2

19 Jun 2006

4730-14-317-0031
Corps De Bride

143170031
AS34TQ102FREP1: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-264-6583
Tube To Boss Straight Adapter

142646583
G12-13-18X150: RNCC: 3 | RNVC: 2
UMAG13X18-150N: RNCC: 3 | RNVC: 2
4AG13-18X150: RNCC: 3 | RNVC: 2
4-595014-3: RNCC: 5 | RNVC: 2
42500027: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-486-0413
Tuyere Ejecteur Air

144860413
HPANW1621AAREP3-7-8-12-16-19: RNCC: 3 | RNVC: 2
V0699-48PDREP3-7-8-12-16-19: RNCC: 3 | RNVC: 2

26 Feb 1997

4730-14-525-5034
Pipe Flange

145255034
A88140188: RNCC: 3 | RNVC: 2
E88140188: RNCC: 5 | RNVC: 9
V88140188: RNCC: 5 | RNVC: 9

6 Jun 2001

4730-14-254-0259
Tube To Gas Fitting Straight Adapter

142540259
12-14-15-21C0: RNCC: 3 | RNVC: 2
UMCA14X15-21N: RNCC: 3 | RNVC: 2
4A14-15-21C0: RNCC: 3 | RNVC: 2
MC14-21: RNCC: 3 | RNVC: 2
99-621-14-198-1: RNCC: 5 | RNVC: 2
99621141981: RNCC: 5 | RNVC: 2
000572282P: RNCC: 5 | RNVC: 2
0UT1-146: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-308-1226
Tube Coupling

143081226
A1-67811: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-338-3346
Bulkhead Hose Connector

143383346
SP1-02-01-01: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-450-7683
Tube To Boss Straight Adapter

144507683
LL115-CS1812L: RNCC: 3 | RNVC: 2
84011827: RNCC: 5 | RNVC: 2

23 Oct 1991

4730-14-370-4643
Quick Disconnect Coupling Half

143704643
E29-573-20G3-4BLAIT0N: RNCC: 2 | RNVC: 2

18 May 1981

4730-14-482-8816
Tube Union

144828816
5A25-20-27CYL: RNCC: 3 | RNVC: 2
202425881160: RNCC: 5 | RNVC: 2
82137400: RNCC: 5 | RNVC: 2

1 Aug 1996

4730-14-576-0875
Hose Clamp

145760875
NSA8696-10M: RNCC: 1 | RNVC: 2
NSA8696-10M: RNCC: 3 | RNVC: 2

29 May 2013

4730-14-218-4083
Lubrication Fitting

142184083
GT1221-12-175: RNCC: 3 | RNVC: 9

30 Jun 1999

4730-14-239-6886

4730-14-387-8855
Tube Tee

143878855
P165B060606: RNCC: 3 | RNVC: 2
713.B.06.06.06: RNCC: 3 | RNVC: 2
713 B 06 06 06: RNCC: 5 | RNVC: 2
713B06 06 06: RNCC: 5 | RNVC: 2
713B06-06-06: RNCC: 5 | RNVC: 2
713B060606: RNCC: 5 | RNVC: 2
74713B060606: RNCC: 5 | RNVC: 2
DHS613-541-01: RNCC: 5 | RNVC: 2
164287: RNCC: 5 | RNVC: 2
74713B060606: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-460-1609
Inter Connecteur

144601609
711052-22: RNCC: 3 | RNVC: 2

13 Jan 1993

4730-14-435-3164
Poignee Valve

144353164
KVP284-000AA: RNCC: 3 | RNVC: 9

6 Nov 1989

4730-14-261-8229
Bouchon Symetrique

142618229
9683-02-224: RNCC: 3 | RNVC: 2
0683-02-20X25: RNCC: 5 | RNVC: 2
0683-02: RNCC: 5 | RNVC: 9
0683-02DN25: RNCC: 5 | RNVC: 9
0683-02-20X25: RNCC: 5 | RNVC: 9
9683-02-20X25: RNCC: 5 | RNVC: 9
9683-02-224: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-561-6069
Tube To Boss Straight Adapter

145616069
6F642EDMLS: RNCC: 3 | RNVC: 2
20 250 100 3170: RNCC: 5 | RNVC: 2

4 Aug 2009

4730-14-262-1474

4730-14-560-9023
Hose Mender

145609023
4132: RNCC: 3 | RNVC: 2
27549: RNCC: 5 | RNVC: 2

28 May 2009

4730-14-273-5173

4730-14-273-5149

4730-14-563-8071
Tube To Boss Straight Adapter

145638071
GE20SRCF: RNCC: 3 | RNVC: 2

17 Mar 2010

4730-14-307-8464
Tubulure Speciale

143078464
B252FD2AREP15: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-252-2598

4730-14-224-8160

4730-14-571-4942
Air Line Manifold

145714942
17140: RNCC: 3 | RNVC: 2

29 Mar 2012

4730-14-526-2806
Bride Carree

145262806
00618030013: RNCC: 3 | RNVC: 2

13 Jul 2001

4730-14-285-0331

4730-14-495-6341
Union

144956341
D48375-70: RNCC: 3 | RNVC: 2
F300 0T 019 5621: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-351-4319
Tube To Boss Straight Adapter

143514319
73-013-029: RNCC: 3 | RNVC: 2

12 Sep 1978

4730-14-532-6204
Commande Proportion

145326204
2402-29-07: RNCC: 3 | RNVC: 2

20 Nov 2002

4730-14-338-3338
Raccordement Coude

143383338
A0412-004F11: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-346-7103
Bride Speciale

143467103
6784-1DT63: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-489-8638
Reducteur Pression

144898638
RED-Q00009X00: RNCC: 3 | RNVC: 2

27 Aug 1997

4730-14-265-3056
Tube To Boss Straight Adapter

142653056
R32-25-33X150: RNCC: 3 | RNVC: 2
99058232: RNCC: 5 | RNVC: 2
R3225-33X150: RNCC: 5 | RNVC: 2
99058232: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-569-8340
Pipe Union

145698340
280.2": RNCC: 3 | RNVC: 2

24 Oct 2011

4730-14-210-9768
Te Egal

142109768
SD17-10: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-449-5394
Tube Union

144495394
UNION MALE R3/8 2353L17,2: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-388-1578
Tube Union

143881578
EN10242-U1-1-FE-A: RNCC: 2 | RNVC: 2
770330106: RNCC: 3 | RNVC: 2
330-1: RNCC: 5 | RNVC: 2
770 330 106: RNCC: 5 | RNVC: 2
251-1: RNCC: 5 | RNVC: 9
330-1: RNCC: 5 | RNVC: 9
E29801U1F: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-400-7095
Flange To Tube Straight Adapter

144007095
J05085-04-0200P031: RNCC: 3 | RNVC: 2

8 May 1985

4730-14-223-3083
Raccord Special

142233083
M105085: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-203-1384

4730-14-488-9878
Tube To Boss Straight Adapter

144889878
00 114 G33 12 B: RNCC: 3 | RNVC: 2
4738-G33-12: RNCC: 5 | RNVC: 9

18 Jun 1997

4730-14-211-8530
Tube Tee

142118530
17 06: RNCC: 3 | RNVC: 2
17-6: RNCC: 3 | RNVC: 2
17-6NN: RNCC: 3 | RNVC: 2
14400388W: RNCC: 3 | RNVC: 2
TA6N: RNCC: 3 | RNVC: 2
10A6: RNCC: 3 | RNVC: 2
T6: RNCC: 3 | RNVC: 2
121130: RNCC: 5 | RNVC: 2
0946710029: RNCC: 5 | RNVC: 2
0946710029: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-431-1542
Pipe Flange

144311542
6784-1DR63A: RNCC: 3 | RNVC: 9

10 Apr 1989

4730-14-040-1373
Te Tube Equipe

140401373
330A72-0013-01: RNCC: 3 | RNVC: 2
330A72-0013-0100: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-570-5919
Packing Nut

145705919
82640733000: RNCC: 3 | RNVC: 2

9 Jan 2012

4730-14-361-0350

4730-14-421-6788
Crepine

144216788
EB59: RNCC: 3 | RNVC: 2

26 Jan 1988

4730-14-292-9421

4730-14-459-8389
Tube Union

144598389
F87BAP16M22: RNCC: 3 | RNVC: 2
57529054: RNCC: 3 | RNVC: 2
4R16-22X150OR: RNCC: 3 | RNVC: 2
1004484310: RNCC: 5 | RNVC: 2
91741722: RNCC: 5 | RNVC: 2
5005430205: RNCC: 5 | RNVC: 2
F87BAB16M22: RNCC: 5 | RNVC: 9

17 Dec 1992

4730-14-306-6506
Tube To Boss Straight Adapter

143066506
NO PRIMARY REF14-306-6506: RNCC: 3 | RNVC: 2
RFM10X100T6: RNCC: 5 | RNVC: 2
85-686-3301: RNCC: 6 | RNVC: 9

1 Jan 1974

4730-14-262-2434
Raccord Equipe

142622434
6412096: RNCC: 3 | RNVC: 2
PA361-122M161P84: RNCC: 3 | RNVC: 9
6412096: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-010-0755
Lubrication Fitting

140100755
9-21-41-01: RNCC: 3 | RNVC: 2
9214101: RNCC: 3 | RNVC: 2
81602-060: RNCC: 5 | RNVC: 9
G81-06-100: RNCC: 5 | RNVC: 9
G81-06X100: RNCC: 5 | RNVC: 9

1 Jan 1961

4730-14-503-2105
Tube Tee

145032105
723.T.06.06.06S: RNCC: 3 | RNVC: 2
P166T060606S: RNCC: 3 | RNVC: 2
723T06 06 06S: RNCC: 5 | RNVC: 2
723 T 06 06 06S: RNCC: 5 | RNVC: 2
723T06-06-06S: RNCC: 5 | RNVC: 2
723T060606S: RNCC: 5 | RNVC: 2
74723T060606S: RNCC: 5 | RNVC: 2
74723T060606S: RNCC: 5 | RNVC: 2

7 Jan 1998

4730-14-247-8198
Raccord Arrivee Car

142478198
9970-145-161: RNCC: 3 | RNVC: 2
456-701-347-0: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-517-7999
Tube-Hose Fitting Compression Sleeve

145177999
720.01.20: RNCC: 3 | RNVC: 2
8020122R00: RNCC: 5 | RNVC: 2

13 Jan 2000

4730-14-491-4055
Tube To Boss Straight Adapter

144914055
WBETX514: RNCC: 3 | RNVC: 2
F300 0T 002 7316: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-394-7283
Tube To Boss Straight Adapter

143947283
8421101366: RNCC: 3 | RNVC: 2

28 Aug 1984

4730-14-436-7056
Bulkhead Hose Connector

144367056
DA2C203503531: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-389-9974
Fluid Passage Bolt

143899974
0000157567: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-496-3818
Tube To Boss Straight Adapter

144963818
191728: RNCC: 3 | RNVC: 2
F300 0T 021 4696: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-350-9196
Tube Tee

143509196
1041400: RNCC: 3 | RNVC: 2
01041400: RNCC: 5 | RNVC: 2

12 Jul 1978

4730-14-373-1608
Pipe Flange

143731608
56224: RNCC: 3 | RNVC: 2

21 Oct 1981

4730-14-431-4609
Quick Disconnect Coupling Assembly

144314609
33830400: RNCC: 3 | RNVC: 2

19 Apr 1989

4730-14-216-1142
Pipe To Tube Straight Adapter

142161142
17580: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-290-7543
Bulkhead Hose Connector

142907543
GI1363: RNCC: 3 | RNVC: 9

1 Jan 1972

4730-14-395-3105
Tube To Boss Straight Adapter

143953105
8BC: RNCC: 3 | RNVC: 9

2 Oct 1984

4730-14-220-6161
Tube Tee

142206161
R14083: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-303-5846
Pipe Flange

143035846
0264401640: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-513-8332
Quick Disconnect Coupling Half

145138332
1220541F: RNCC: 3 | RNVC: 2

14 Apr 1999

4730-14-441-6636
Hose To Boss Straight Adapter

144416636
7191030108: RNCC: 3 | RNVC: 2
7191030108: RNCC: 5 | RNVC: 2

10 Sep 1990

4730-14-287-7310
Pipe Flange

142877310
13531040C: RNCC: 3 | RNVC: 2
53104: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-441-4237
Bulkhead Hose Connector

144414237
PM1A729009242: RNCC: 3 | RNVC: 2
PM1A729009242: RNCC: 5 | RNVC: 2

22 Aug 1990

4730-14-486-0411
Tuyere Ejecteur Air

144860411
HPANW1601AAREP3-7-8-9-17-20: RNCC: 3 | RNVC: 2
V0696-48PDREP3-7-8-9-17-20: RNCC: 3 | RNVC: 2

26 Feb 1997

4730-14-313-5819
Bulkhead Hose Connector

143135819
121E52-225-04-0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-224-3920
Tube Fitting Brazing Ferrule

142243920
GSM163-002F7-25-2-20: RNCC: 3 | RNVC: 2
GSM163-02F7-25-2-20: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-422-0634
Sous Ens J Flexible

144220634
GSM166-010F38: RNCC: 3 | RNVC: 2

18 Feb 1988

4730-14-438-3831
Tube To Boss Straight Adapter

144383831
4730HL-1DE42,4: RNCC: 2 | RNVC: 2
Y07134-01-0000P001DE42,4: RNCC: 3 | RNVC: 2

19 Mar 1990

4730-14-347-2183
Tube To Boss Straight Adapter

143472183
GSM164-014F21: RNCC: 3 | RNVC: 2
GSM164-14F21: RNCC: 5 | RNVC: 2

19 Jan 1978

4730-14-339-9776
Raccord Flexible

143399776
GSM166-004F5: RNCC: 3 | RNVC: 2
GSM166-04F5: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-245-8901
Croix De Reduction

142458901
5CXR14-14-14-10NN: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-333-5314
Hydraulic System Accessories Manifold

143335314
81536801: RNCC: 3 | RNVC: 2
81536-801: RNCC: 5 | RNVC: 9
81536801: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-575-6018
Hose Clamp

145756018
TORRO40-60/9C7W1: RNCC: 3 | RNVC: 2
726662: RNCC: 5 | RNVC: 2
126 7565 050: RNCC: 5 | RNVC: 2

17 Apr 2013

4730-14-302-9926
Tube To Boss Straight Adapter

143029926
7062BB1B1966VCTT1-25UA9C337: RNCC: 2 | RNVC: 2
327162: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-457-7603
Tube Union

144577603
4944042810: RNCC: 3 | RNVC: 2
85-694-8647: RNCC: 6 | RNVC: 9

17 Sep 1992

4730-14-562-1946
Hose Tee

145621946
3104 10 12: RNCC: 3 | RNVC: 2
FS0002477: RNCC: 6 | RNVC: 9

6 Oct 2009

4730-14-362-8053

4730-14-228-0278
Banjo Special

142280278
2040-36: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-560-0876
Hose Elbow

145600876
15873: RNCC: 3 | RNVC: 2
29669: RNCC: 5 | RNVC: 2

23 Mar 2009

4730-14-334-4739

4730-14-577-4634
Quick Disconnect Coupling Half

145774634
023312: RNCC: 3 | RNVC: 2

18 Sep 2013

4730-14-326-3471
Pompe Gonflage Ball

143263471
ARTICLE41UES155: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-326-2539

4730-14-276-7381
Boulon Et Raccord

142767381
240900: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-260-9385

Load More Results