What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 161 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 161 of 185

4730-14-344-7446

4730-14-446-4751
Raccord Spherique

144464751
9932160080: RNCC: 3 | RNVC: 2

20 Mar 1991

4730-14-397-1178
Distribut Azote Bp

143971178
20734559: RNCC: 3 | RNVC: 2

1 Dec 1984

4730-14-561-6514
Return Tube Bend

145616514
A7 74 896: RNCC: 3 | RNVC: 2

17 Aug 2009

4730-14-501-2218
Tube To Boss Straight Adapter

145012218
427-103: RNCC: 3 | RNVC: 2
427.103: RNCC: 3 | RNVC: 2
F300 0T 025 2623: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-571-1099
Hose Coupling

145711099
5082-182: RNCC: 3 | RNVC: 2
5082-182: RNCC: 5 | RNVC: 2

21 Feb 2012

4730-14-206-6003
Tube To Boss Straight Adapter

142066003
612-108-032-0: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-312-1450
Tube To Boss Straight Adapter

143121450
4039563: RNCC: 3 | RNVC: 2
10-435: RNCC: 5 | RNVC: 2
10-435: RNCC: 5 | RNVC: 9
4039563: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-345-1092
Tube To Boss Straight Adapter

143451092
300-650-201-0: RNCC: 3 | RNVC: 2
001008010A: RNCC: 5 | RNVC: 2
300-650-201P: RNCC: 5 | RNVC: 2

5 Oct 1977

4730-14-430-2147
Tube Coupling

144302147
0176-10-00-13: RNCC: 3 | RNVC: 2

8 Mar 1989

4730-14-423-7044
Tube Fitting Clinch Sleeve

144237044
Q1-5D14S: RNCC: 3 | RNVC: 2

28 Apr 1988

4730-14-238-9052
Tube To Boss Straight Adapter

142389052
NO PRIMARY REF14-238-9052: RNCC: 3 | RNVC: 2
36F3: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-366-6232
Quick Disconnect Coupling Half

143666232
H8-63: RNCC: 3 | RNVC: 2
H8-63: RNCC: 3 | RNVC: 2

20 Nov 1980

4730-14-501-2375
Tube To Boss Straight Adapter

145012375
471-204: RNCC: 3 | RNVC: 2
471.204: RNCC: 3 | RNVC: 2
F300 0T 025 2780: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-257-2572
Fluid Passage Bolt

142572572
702A30-0112-20: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-276-2068
Pipe Flange

142762068
6784-1EA14: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-390-6956
Fluid Pressure Line Multiple Connector

143906956
84980660: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-371-0484
Tube To Boss Straight Adapter

143710484
8401148066: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-295-3221
Tube Tee

142953221
3600910: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-426-7941
Tube Tee

144267941
4730HEING139,7X10-76,1X4,5: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-443-3257
Tube To Hose Straight Adapter

144433257
H201ACV200M: RNCC: 3 | RNVC: 2

14 Nov 1990

4730-14-406-7544
Tube Tee

144067544
T30LAITONNICKELE: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-541-0062
Tube To Boss Straight Adapter

145410062
6501BRT114600: RNCC: 3 | RNVC: 2

5 May 2004

4730-14-378-8229
Tube To Boss Straight Adapter

143788229
413010: RNCC: 3 | RNVC: 2
E24627: RNCC: 5 | RNVC: 2

11 Aug 1982

4730-14-240-6886
Raccord Special

142406886
PR47419: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-565-2205
Tube Tee

145652205
838.050.050: RNCC: 3 | RNVC: 2
SA017519: RNCC: 5 | RNVC: 2

28 Jul 2010

4730-14-377-5457
Tube To Boss Straight Adapter

143775457
83662: RNCC: 3 | RNVC: 2
83662: RNCC: 5 | RNVC: 2

17 May 1982

4730-14-533-6822
Tube Coupling Assembly

145336822
136612: RNCC: 3 | RNVC: 2

18 Feb 2003

4730-14-361-1257
Fluid Pressure Line Multiple Connector

143611257
P9059: RNCC: 3 | RNVC: 2
96101202: RNCC: 3 | RNVC: 2
91399264: RNCC: 5 | RNVC: 2

24 Jan 1980

4730-14-489-8267
Pipe To Boss Straight Adapter

144898267
E4750015: RNCC: 3 | RNVC: 9

22 Aug 1997

4730-14-573-2352
Hose Clamp

145732352
ITO121BC10: RNCC: 3 | RNVC: 2
A230406000028: RNCC: 5 | RNVC: 2
785 025 121: RNCC: 5 | RNVC: 2

25 Sep 2012

4730-14-470-4269
Durite Avec Collier

144704269
580210100: RNCC: 3 | RNVC: 2
FA6064: RNCC: 5 | RNVC: 2
24440000100: RNCC: 5 | RNVC: 2

16 Jun 1994

4730-14-365-9417

4730-14-262-1454

4730-14-369-3217
Sediment Strainer Body

143693217
366A75-3208-20: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-574-2752
Quick-Disconnect Nipple

145742752
NH3/8DN10TARISO16028: RNCC: 3 | RNVC: 2

20 Dec 2012

4730-14-317-1875
Fluid Pressure Line Multiple Connector

143171875
F454-8DEA: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-509-1635
Tube To Boss Straight Adapter

145091635
KQT06-U01: RNCC: 3 | RNVC: 2
ND1894: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-307-8572
Swivel Retaining Pipe Flange

143078572
RUAN7516-30: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-539-7139
Pipe Flange

145397139
LL9806-34-30S: RNCC: 3 | RNVC: 2

3 Feb 2004

4730-14-222-3004
Lubricating Oil Cup

142223004
2009999016: RNCC: 3 | RNVC: 2
WAM501-2Z: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-433-1417
Tube To Boss Straight Adapter

144331417
42-12-18X150NU: RNCC: 3 | RNVC: 2
4A12L18X150NU: RNCC: 3 | RNVC: 2
91619214: RNCC: 5 | RNVC: 2
0024331118: RNCC: 5 | RNVC: 2
0024331118: RNCC: 5 | RNVC: 9

11 Jul 1989

4730-14-350-2693
Tube To Boss Straight Adapter

143502693
91642214: RNCC: 3 | RNVC: 2
AMF21-13BG: RNCC: 5 | RNVC: 9

14 Jun 1978

4730-14-459-1558
Tube To Boss Straight Adapter

144591558
20322216: RNCC: 3 | RNVC: 2
2-27507: RNCC: 3 | RNVC: 2
Q88-GA12-1/2BSPTL-NU: RNCC: 5 | RNVC: 2
91372863: RNCC: 5 | RNVC: 2
91569405: RNCC: 5 | RNVC: 2
P4-GE12-1/2BSPT-L-NU: RNCC: 5 | RNVC: 2
20322216: RNCC: 5 | RNVC: 9

19 Nov 1992

4730-14-328-9562
Tube Tee

143289562
Q1-5TR14X10X14NNNU: RNCC: 3 | RNVC: 2
TRK14X10X14NNU: RNCC: 3 | RNVC: 2
10RCA14X10X14NU: RNCC: 3 | RNVC: 2
GSM164-012F10: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-373-8375
Quick Disconnect Coupling Half

143738375
PSP06-6810/LD/CP: RNCC: 3 | RNVC: 2
PSP06-6809/1CP: RNCC: 5 | RNVC: 2

13 Nov 1981

4730-14-469-6803
Fluid Flow Restrictor

144696803
DA2C721200961: RNCC: 3 | RNVC: 2

4 May 1994

4730-14-366-5972

4730-14-413-8996
Tube Tee

144138996
1TR16X16X12NU: RNCC: 3 | RNVC: 2

22 Jan 1987

4730-14-350-0696
Tube To Boss Straight Adapter

143500696
100-376: RNCC: 3 | RNVC: 2

14 Jun 1978

4730-14-499-4669
Tube To Boss Straight Adapter

144994669
14029104: RNCC: 3 | RNVC: 2
14029104A: RNCC: 5 | RNVC: 2
F300 0T 022 7065: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-525-5824
Hydraulic Swivel Joint

145255824
10 146 063 1000: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-534-0498
Threaded Tube Fitting Plug

145340498
NNM0010032590009: RNCC: 2 | RNVC: 2

12 Mar 2003

4730-14-306-5225
Tube To Boss Straight Adapter

143065225
2911202703: RNCC: 3 | RNVC: 2
2911202703: RNCC: 5 | RNVC: 2
XMT585452: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-299-2619
Fluid Passage Bolt

142992619
370161: RNCC: 3 | RNVC: 2
A14015: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-446-6159
Tube-Hose Fitting Compression Sleeve

144466159
DPR10LX: RNCC: 3 | RNVC: 2
RAR1455: RNCC: 5 | RNVC: 2
DPR10LSA3C: RNCC: 5 | RNVC: 9
435603: RNCC: 5 | RNVC: 9
431364: RNCC: 5 | RNVC: 9
DPR10-L/S: RNCC: 5 | RNVC: 9
DPR10L: RNCC: 5 | RNVC: 9
DPR10LX: RNCC: 5 | RNVC: 9

5 Apr 1991

4730-14-305-2046
Tube To Boss Straight Adapter

143052046
UMA6X10-100NNU: RNCC: 3 | RNVC: 2
12-6-10X100NU: RNCC: 3 | RNVC: 2
121010NU: RNCC: 5 | RNVC: 2
EMDAS05303: RNCC: 5 | RNVC: 2
5005030409: RNCC: 5 | RNVC: 2
519 90 30 030 11: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-301-9271
Tube To Boss Straight Adapter

143019271
9090361: RNCC: 3 | RNVC: 2
9-09-03-61: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-489-1569
Tube To Boss Swivel Joint

144891569
1157662007: RNCC: 3 | RNVC: 2
1157662007: RNCC: 5 | RNVC: 2
91830772: RNCC: 5 | RNVC: 2

30 Jun 1997

4730-14-358-1945
Fluid Passage Bolt

143581945
0000133025: RNCC: 3 | RNVC: 2
0000133025: RNCC: 5 | RNVC: 9
133025: RNCC: 5 | RNVC: 9

13 Aug 1979

4730-14-553-1212
Tube Fitting Clinch Sleeve

145531212
PSR15LX: RNCC: 3 | RNVC: 2
431359: RNCC: 5 | RNVC: 2
PSR15LX: RNCC: 5 | RNVC: 9

5 Mar 2007

4730-14-430-4337
Tube Tee

144304337
BN329-512TEEG33,7-2,77: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-373-0190
Pipe Flange

143730190
A4H23274: RNCC: 3 | RNVC: 2
X79277-5-5: RNCC: 5 | RNVC: 2
85-691-7584: RNCC: 6 | RNVC: 9

21 Sep 1981

4730-14-562-4821
Tube Tee

145624821
T30-PS: RNCC: 3 | RNVC: 2

29 Oct 2009

4730-14-501-2197
Tube To Boss Straight Adapter

145012197
423-309: RNCC: 3 | RNVC: 2
423.309: RNCC: 3 | RNVC: 2
F300 0T 025 2602: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-307-9642
Tube Tee

143079642
NO PRIMARY REF14-307-9642: RNCC: 3 | RNVC: 2
1002535: RNCC: 5 | RNVC: 9
3192535: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-317-9368
Fluid Pressure Line Multiple Connector

143179368
341A75-2009-01: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-290-9881
Self-Sealing Coupling Assembly

142909881
NO PRIMARY REF14-290-9881: RNCC: 3 | RNVC: 2
18: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-446-5589
Sediment Strainer Element

144465589
MAT473-0028: RNCC: 3 | RNVC: 2

26 Mar 1991

4730-14-342-1677
Tube To Boss Straight Adapter

143421677
3210-94-11-031: RNCC: 3 | RNVC: 2
85-688-7350: RNCC: 6 | RNVC: 9

14 Apr 1977

4730-14-339-9703
Tube Tee

143399703
GSM163-017F60: RNCC: 3 | RNVC: 2
GSM163-17F60: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-393-4025
Raccord Obturateur

143934025
N006-223-83: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-276-0393
Hose To Boss Straight Adapter

142760393
R616-02: RNCC: 2 | RNVC: 2
74715: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-321-9630
Pipe Flange

143219630
GSM147-005F11: RNCC: 3 | RNVC: 2
MEC10004: RNCC: 3 | RNVC: 2
GSM147-05F11: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-571-8397
Tube To Boss Straight Adapter

145718397
86113400: RNCC: 3 | RNVC: 2
4DL12 16X150R NU: RNCC: 5 | RNVC: 2

16 May 2012

4730-14-241-4946

4730-14-303-9253

4730-14-295-8451

4730-14-267-5223
Bouchon Special

142675223
24046010700: RNCC: 3 | RNVC: 2
46J107: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-446-9669
Tube Union

144469669
341045: RNCC: 3 | RNVC: 2

19 Apr 1991

4730-14-272-5581

4730-14-276-6383

4730-14-268-0613
Ecrou Special

142680613
3T03010915: RNCC: 3 | RNVC: 2
3T03010915A: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-311-8070

4730-14-471-5119
Tube Union

144715119
4R16S16X150JC: RNCC: 3 | RNVC: 2
8004434552: RNCC: 5 | RNVC: 2
5010051035: RNCC: 5 | RNVC: 2

31 Aug 1994

4730-14-031-5549

4730-14-575-3945
Tube Tee

145753945
93406621: RNCC: 3 | RNVC: 2
5005630137: RNCC: 5 | RNVC: 2
20740299: RNCC: 5 | RNVC: 2

3 Apr 2013

4730-14-508-9040
Tube Union

145089040
N102871: RNCC: 3 | RNVC: 2

7 Oct 1998

4730-14-505-3335
Tube Union

145053335
F88BFR8M22: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-031-9395

4730-14-361-5757

4730-14-278-8123

4730-14-301-4667
Tube To Boss Straight Adapter

143014667
12-38-33-42C0: RNCC: 3 | RNVC: 2
UMCA38X33-42N: RNCC: 3 | RNVC: 2
4A38-33-42C0: RNCC: 3 | RNVC: 2
MC38-42: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-278-8341
Passage De Cloison

142788341
219692: RNCC: 3 | RNVC: 2
PA365-196M3P15: RNCC: 3 | RNVC: 9

1 Jan 1971

4730-14-460-5273
Tube To Hose Straight Adapter

144605273
815053: RNCC: 3 | RNVC: 2
M16375-65: RNCC: 5 | RNVC: 2

27 Jan 1993

4730-14-431-9487
Pipe Flange

144319487
UA50088012-LSPN-DE36: RNCC: 3 | RNVC: 2

17 May 1989

4730-14-204-9301
Sediment Strainer Element

142049301
0259-02: RNCC: 3 | RNVC: 2
600350: RNCC: 5 | RNVC: 2
460089: RNCC: 5 | RNVC: 2
7046098910: RNCC: 5 | RNVC: 2
543069: RNCC: 5 | RNVC: 2
7910009518: RNCC: 5 | RNVC: 2
7910009518: RNCC: 5 | RNVC: 2
7910009518: RNCC: 5 | RNVC: 9
302853: RNCC: 5 | RNVC: 9
7046098910: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-14-522-1643
Quick Disconnect Coupling Half

145221643
9697-12-15X21: RNCC: 3 | RNVC: 2

5 Oct 2000

4730-14-328-8969
Tube Tee

143288969
9104250066: RNCC: 3 | RNVC: 2
CA7-25: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-218-4239
Fluid Passage Bolt

142184239
NO PRIMARY REF14-218-4239: RNCC: 3 | RNVC: 2
NMGVU80VRS104: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-455-4015
Quick Disconnect Coupling Half

144554015
RBE06-1151-0DIA0JV: RNCC: 3 | RNVC: 2
91726922: RNCC: 5 | RNVC: 2
91727011: RNCC: 5 | RNVC: 2

21 May 1992

4730-14-409-2530
Tube To Gas Fitting Straight Adapter

144092530
G8-101-2564: RNCC: 3 | RNVC: 2
G8-101-2564: RNCC: 5 | RNVC: 2
85-692-4697: RNCC: 6 | RNVC: 9

7 May 1986

4730-14-429-5206
Fluid Pressure Line Multiple Connector

144295206
755-1045: RNCC: 3 | RNVC: 2

27 Jan 1989

4730-14-398-5866
Tube Tee

143985866
GSM164-053F12: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-418-7943
Tube To Boss Straight Adapter

144187943
AA18X22-150N: RNCC: 3 | RNVC: 2

16 Sep 1987

4730-14-501-2122
Tube To Boss Straight Adapter

145012122
412756-440-22-11-11: RNCC: 3 | RNVC: 2
412756-440.22.11.11: RNCC: 3 | RNVC: 2
F300 0T 025 2527: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-268-1164
Pipe Flange

142681164
6784-1CG20: RNCC: 2 | RNVC: 2
MEC11345: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-367-9155
Quick Disconnect Coupling Half

143679155
M0F13M22X1-5: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-520-2954
Tube To Boss Straight Adapter

145202954
2081.12.6: RNCC: 3 | RNVC: 2

17 May 2000

4730-14-317-6291
Pipe Flange

143176291
P0032272-0: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-555-9602
Tube To Boss Straight Adapter

145559602
F4PB12-1/4: RNCC: 3 | RNVC: 2
F4PB12-1/4: RNCC: 5 | RNVC: 2

15 Jan 2008

4730-14-428-9248
Tube Coupling

144289248
2-540461-2: RNCC: 3 | RNVC: 2
2-540461-2: RNCC: 5 | RNVC: 9

22 Dec 1988

4730-14-395-5623
Tube Coupling

143955623
5-1881B43152-117: RNCC: 3 | RNVC: 2

30 Oct 1984

4730-14-430-7183
Bulkhead Hose Connector

144307183
PM1A751199001: RNCC: 3 | RNVC: 2
PM1A751199001: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-207-5820
Tube To Boss Straight Adapter

142075820
5219180: RNCC: 3 | RNVC: 2
21918: RNCC: 5 | RNVC: 2
FOE5219180: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-335-4617
Pipe Flange

143354617
7062DC1F1M38XC18: RNCC: 4 | RNVC: 1

30 Jun 1976

4730-14-386-9934
Fluid Pressure Line Multiple Connector

143869934
01190613: RNCC: 3 | RNVC: 2
1190613: RNCC: 5 | RNVC: 2

24 Aug 1983

4730-14-379-9326
Tube To Boss Straight Adapter

143799326
7758: RNCC: 3 | RNVC: 9

20 Oct 1982

4730-14-320-7097
Embout De Tube

143207097
121E71-525-04-0: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-535-8781
Fluid Pressure Line Multiple Connector

145358781
E190203: RNCC: 3 | RNVC: 2
EV190/2/03: RNCC: 5 | RNVC: 2
SYQ2820: RNCC: 5 | RNVC: 2

25 Jun 2003

4730-14-561-6289
Hose Clamp

145616289
ZT0E91: RNCC: 3 | RNVC: 2
CT 86-91: RNCC: 3 | RNVC: 9
14775: RNCC: 5 | RNVC: 2
TP 86-91: RNCC: 5 | RNVC: 9

10 Aug 2009

4730-14-370-2625

4730-14-394-6313

4730-14-365-3051

4730-14-500-6684
Tube Tee

145006684
XTR25-30-25SA3C: RNCC: 3 | RNVC: 2
XTR25-30-25-SA3C: RNCC: 3 | RNVC: 2
F300 0T 024 6875: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-251-9147
Fluid Pressure Line Multiple Connector

142519147
99630101404: RNCC: 3 | RNVC: 2
99-630-10-14-04: RNCC: 5 | RNVC: 2
48J17: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-457-7066
Pipe Fitting Flared Collar

144577066
89043-300: RNCC: 3 | RNVC: 2
RAR1550: RNCC: 5 | RNVC: 2
89043300: RNCC: 5 | RNVC: 2

16 Sep 1992

4730-14-352-6570
Fluid Passage Bolt

143526570
9001-528: RNCC: 3 | RNVC: 9
14-75122: RNCC: 5 | RNVC: 9
9001-509-00: RNCC: 5 | RNVC: 9
9001528: RNCC: 5 | RNVC: 9
ROT9001-528: RNCC: 5 | RNVC: 9

14 Nov 1978

4730-14-351-9159
Lubrication Fitting

143519159
96201-30001: RNCC: 3 | RNVC: 2
96201-30001: RNCC: 5 | RNVC: 2

16 Oct 1978

4730-14-527-0258
Quick Disconnect Coupling Half

145270258
135627: RNCC: 3 | RNVC: 2
SYQ0401: RNCC: 5 | RNVC: 2

26 Sep 2001

4730-14-444-7279
Hydraulic System Accessories Manifold

144447279
6743407701: RNCC: 3 | RNVC: 2
6743407700: RNCC: 5 | RNVC: 2

21 Jan 1991

4730-14-516-3213
Tube Coupling

145163213
2-300161-3: RNCC: 3 | RNVC: 2
2-300161-3: RNCC: 5 | RNVC: 9
23001613: RNCC: 5 | RNVC: 9

20 Sep 1999

4730-14-462-5687
Quick Disconnect Plug

144625687
A87206: RNCC: 3 | RNVC: 2

28 Apr 1993

4730-14-371-0519
Tube Tee

143710519
8450085966: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-235-1601
Fluid Passage Bolt

142351601
NO PRIMARY REF14-235-1601: RNCC: 3 | RNVC: 2
45141: RNCC: 5 | RNVC: 9
45141: RNCC: 5 | RNVC: 9
45141ACIER: RNCC: 5 | RNVC: 9
45141LAIT0N: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-459-7232
Tube Union

144597232
312-06056-013: RNCC: 3 | RNVC: 2

15 Dec 1992

4730-14-500-6328
Tube To Boss Straight Adapter

145006328
XGE12-S-R1-4A3C: RNCC: 3 | RNVC: 2
XGE12SR1-4A3C: RNCC: 3 | RNVC: 2
F300 0T 024 6514: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-298-9574

4730-14-297-8964
Bloc De Derivation

142978964
411MA0162FB25: RNCC: 3 | RNVC: 2
411MA162FB25: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-339-0951
Partie Mobile

143390951
GSM425-004F23: RNCC: 3 | RNVC: 2
A0009-001F14: RNCC: 5 | RNVC: 2
GSM425-04F23: RNCC: 5 | RNVC: 2

17 Dec 1976

4730-14-408-2618
Bulkhead Hose Connector

144082618
RBE06-28060SICVDFBDKV: RNCC: 3 | RNVC: 2
2427432240: RNCC: 5 | RNVC: 2
2427432240: RNCC: 5 | RNVC: 9

19 Mar 1986

4730-14-424-5504
Tube To Boss Straight Adapter

144245504
LW114-CB2512N: RNCC: 3 | RNVC: 2
UML25X20-27N: RNCC: 5 | RNVC: 2

27 May 1988

4730-14-268-5020

4730-14-239-6895

4730-14-528-1328
Jeu De 4 Raccords

145281328
ACL287-01: RNCC: 3 | RNVC: 9

20 Dec 2001

4730-14-386-9970
Tube To Boss Straight Adapter

143869970
20630-5-6-3: RNCC: 3 | RNVC: 2
20630-5-6-3: RNCC: 5 | RNVC: 2

24 Aug 1983

4730-14-389-6061
Tube Tee

143896061
J3BRAB10-1-2: RNCC: 3 | RNVC: 2
J3BRAB10-1-2: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-345-6541
Tube To Boss Straight Adapter

143456541
419133: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-447-2107
Flange To Tube Straight Adapter

144472107
BN325 526REPF: RNCC: 3 | RNVC: 2

3 May 1991

4730-14-328-0110
Tube Fitting Clinch Sleeve

143280110
9124180027: RNCC: 3 | RNVC: 2
BLH18: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-263-7905
Coude Dechappement

142637905
DLT002843: RNCC: 3 | RNVC: 2
DLT002843: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-494-3357
Fluid Passage Bolt

144943357
5000296465: RNCC: 3 | RNVC: 2
F300 0T 017 0379: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-297-8980
Bloc De Derivation

142978980
411MA0162FB39: RNCC: 3 | RNVC: 2
411MA162FB39: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-477-4011
Flexible Tube Coupling Assembly

144774011
FAL40-03: RNCC: 3 | RNVC: 2
N7730715140: RNCC: 5 | RNVC: 2

23 Aug 1995

4730-14-423-7667
Tube Tee

144237667
P4-1TR10X12X10: RNCC: 3 | RNVC: 2

28 Apr 1988

4730-14-229-8332

4730-14-341-4086

4730-14-356-6271

4730-14-276-2061
Jeu De Bagues

142762061
6784-1DM50: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-406-2465
Tube Fitting Flared Sleeve

144062465
9949954: RNCC: 3 | RNVC: 2
6026010: RNCC: 5 | RNVC: 2
TS2154-4: RNCC: 5 | RNVC: 2
6026010: RNCC: 5 | RNVC: 2
24310040: RNCC: 5 | RNVC: 2

8 Jan 1986

4730-14-511-2746
Tube Coupling

145112746
9781080332: RNCC: 3 | RNVC: 2

9 Dec 1998

4730-14-367-9887
Pipe Flange

143679887
R35070SMREP7: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-505-0148
Return Tube Bend

145050148
5000418199: RNCC: 3 | RNVC: 2

11 Mar 1998

4730-14-450-5494
Tube Fitting Locknut

144505494
Y9801134: RNCC: 3 | RNVC: 2
91607863: RNCC: 5 | RNVC: 2

9 Oct 1991

4730-14-575-4040
Hose Clamp

145754040
09255001: RNCC: 3 | RNVC: 2
Y00013460: RNCC: 5 | RNVC: 2

4 Apr 2013

4730-14-446-4697
Flange To Tube Elbow

144464697
0000365540: RNCC: 3 | RNVC: 2

20 Mar 1991

4730-14-244-6626
Fluid Passage Bolt

142446626
50011: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-529-4770
Fluid Pressure Line Multiple Connector

145294770
D66699: RNCC: 3 | RNVC: 2

29 Mar 2002

4730-14-448-5883
Tube To Boss Straight Adapter

144485883
12-16-30X200: RNCC: 3 | RNVC: 2

3 Jul 1991

4730-14-432-2396
Tube Coupling

144322396
SUDO340CU: RNCC: 3 | RNVC: 2
SUDO340CU: RNCC: 5 | RNVC: 9

30 May 1989

4730-14-469-2530
Pipeline Flexible Spacer

144692530
DILATOFLEXNT150CCPN16: RNCC: 3 | RNVC: 2
98657300049: RNCC: 5 | RNVC: 2

13 Apr 1994

4730-14-350-6211
Tube To Boss Straight Adapter

143506211
17542: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-352-6116
Fluid Passage Bolt

143526116
053V01-542125X: RNCC: 3 | RNVC: 2

14 Nov 1978

4730-14-429-2997
Quick Disconnect Coupling Half

144292997
HA0502200: RNCC: 3 | RNVC: 2
A07080118: RNCC: 5 | RNVC: 2
A07080118: RNCC: 5 | RNVC: 9

11 Jan 1989

4730-14-447-9454
Fluid Flow Restrictor

144479454
170917: RNCC: 3 | RNVC: 2

10 Jun 1991

4730-14-521-1721
Tube Fitting Clinch Sleeve

145211721
139492: RNCC: 3 | RNVC: 2

12 Jul 2000

4730-14-325-9071
Pipe Flange

143259071
AS34TV106REP22: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-307-3985
Swivel Retaining Pipe Flange

143073985
DLT049861: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-365-2411

4730-14-279-0538

4730-14-207-2455
Mamelon Double Spec

142072455
5224: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-241-4150
Embout Pour Raccord

142414150
000-40876-000: RNCC: 3 | RNVC: 2
000-40876-000: RNCC: 5 | RNVC: 2
40876: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-406-7025
Raccord Refoulement

144067025
217753: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-344-6301
Raccord Orientable

143446301
P4ES109-55TF: RNCC: 3 | RNVC: 2
T0U90465: RNCC: 5 | RNVC: 2

9 Sep 1977

4730-14-441-5622
Tube Union

144415622
1900880: RNCC: 3 | RNVC: 2
LN320-036REP05: RNCC: 3 | RNVC: 2
FLEX1L88,9PN16EPDM/ACIER: RNCC: 5 | RNVC: 2
190 0880: RNCC: 5 | RNVC: 2
STRAUB-FLEX1L88,9EPDM/ACIER: RNCC: 5 | RNVC: 2

3 Sep 1990

4730-14-463-0531
Quick Disconnect Coupling Half

144630531
N001-221-88: RNCC: 3 | RNVC: 2
N00122188: RNCC: 5 | RNVC: 2

14 May 1993

4730-14-449-9278
Tube To Boss Straight Adapter

144499278
MAT164-0056F3: RNCC: 3 | RNVC: 2
MAT164-0056F3C: RNCC: 3 | RNVC: 2

16 Sep 1991

4730-14-444-8816
Quick Disconnect Coupling Half

144448816
RBO06-1810/C: RNCC: 3 | RNVC: 2
RBO06-1810/L: RNCC: 3 | RNVC: 2
RBO6-1810/C: RNCC: 5 | RNVC: 2

28 Jan 1991

4730-14-232-3284
Tube To Boss Straight Adapter

142323284
552-412MA052DET1-2: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-574-1910
Moisture Trap

145741910
NO PRIMARY REF 14-574-1910: RNCC: 3 | RNVC: 2
91928954: RNCC: 5 | RNVC: 2
BEKOMAT 12 CO: RNCC: 5 | RNVC: 2

14 Dec 2012

4730-14-414-8921
Pipe Expansion Joint

144148921
NO PRIMARY REF14-414-8921: RNCC: 3 | RNVC: 2
D20431: RNCC: 5 | RNVC: 9

18 Mar 1987

4730-14-329-0907
Pipe Flange

143290907
7062TD1F1F168-3UE10Z1: RNCC: 2 | RNVC: 2

2 Jul 1975

4730-14-545-2790
Pipe Flange

145452790
LN320058-DN300-BRIDE CREUSE-PN16: RNCC: 3 | RNVC: 2
23REDN/LN320/058-DN300-PN16-F20: RNCC: 5 | RNVC: 2
SYQ5525: RNCC: 5 | RNVC: 2

31 Mar 2005

4730-14-360-3967
Sediment Strainer Element

143603967
2908-0087: RNCC: 3 | RNVC: 2
SAF2908-0087: RNCC: 5 | RNVC: 9

23 Nov 1979

4730-14-256-7016
Swivel Retaining Pipe Flange

142567016
31765: RNCC: 3 | RNVC: 9

1 Jan 1969

4730-14-393-8034
Tube To Boss Straight Adapter

143938034
00-030-3000: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-538-0463
Tube To Boss Straight Adapter

145380463
132062: RNCC: 3 | RNVC: 2

9 Dec 2003

4730-14-447-1512
Fluid Pressure Line Multiple Connector

144471512
P109234H: RNCC: 3 | RNVC: 2

3 May 1991

4730-14-550-4361
Tube Tee

145504361
ET22LVOMDCF: RNCC: 3 | RNVC: 2
5010631307: RNCC: 5 | RNVC: 2
ET22LVOMDCF: RNCC: 5 | RNVC: 9

20 Jun 2006

4730-14-365-7271
Tube Tee

143657271
7701502675: RNCC: 3 | RNVC: 2
7700547266: RNCC: 5 | RNVC: 2

8 Oct 1980

4730-14-370-0203
Fluid Pressure Line Multiple Connector

143700203
0235707220: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-359-6444
Tube To Boss Straight Adapter

143596444
AURA14X6: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-507-6654
Tube Tee

145076654
1TR080408NU: RNCC: 3 | RNVC: 2
91971621: RNCC: 5 | RNVC: 2

11 Aug 1998

4730-14-216-1107
Fluid Pressure Line Multiple Connector

142161107
15115108: RNCC: 3 | RNVC: 2
115108: RNCC: 5 | RNVC: 2
M115108: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-470-3257
Hose To Gas Fitting Straight Adapter

144703257
DE10651: RNCC: 3 | RNVC: 2

15 Jun 1994

4730-14-454-4131
Tube To Gas Fitting Straight Adapter

144544131
15722: RNCC: 3 | RNVC: 2
RAR1514: RNCC: 5 | RNVC: 2

2 Apr 1992

4730-14-229-8268

4730-14-304-8157
Embout Sortie Tube

143048157
NO PRIMARY REF14-304-8157: RNCC: 3 | RNVC: 2
20041: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-260-9200

4730-14-569-1260
Quick Disconnect Coupling Half

145691260
7M1015: RNCC: 3 | RNVC: 2

10 Aug 2011

4730-14-255-6556
Raccord Multiple Co

142556556
E34604C: RNCC: 3 | RNVC: 9
E34604: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-223-2948
Bouchon De Raccord

142232948
SK20025A: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-346-6782

4730-14-562-9906
Tube Nipple

145629906
G25ZS71: RNCC: 3 | RNVC: 2

11 Dec 2009

4730-14-427-8505
Corps Raccord

144278505
AS34TQ104GREP1: RNCC: 3 | RNVC: 2

17 Nov 1988

4730-14-450-3086
De Raccordemen Bloc

144503086
445103: RNCC: 3 | RNVC: 2

25 Sep 1991

4730-14-269-1929

4730-14-457-8951
Tube Tee

144578951
4730JCING088,9X08-076,1X07,1: RNCC: 2 | RNVC: 2

26 Sep 1992

4730-14-333-9928
Quick Disconnect Coupling Half

143339928
RBE11-1816/IA/9: RNCC: 3 | RNVC: 2
RBE11-1816IA9: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-242-1061
Tube Union

142421061
EN10242-U2-1/2-FE-A: RNCC: 2 | RNVC: 2
770331104: RNCC: 3 | RNVC: 2
331 1-2: RNCC: 5 | RNVC: 2
770 331 104: RNCC: 5 | RNVC: 2
253 1-2: RNCC: 5 | RNVC: 9
E29801U2D: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-526-1651
Self-Sealing Coupling Assembly

145261651
N00942998: RNCC: 3 | RNVC: 2
SCB20.7155/IC/VR/KB/SP-N00942998: RNCC: 5 | RNVC: 2
SCB207155IC/VR/KB/SP: RNCC: 5 | RNVC: 2

4 Jul 2001

4730-14-304-8062
Raccord Amortisseur

143048062
DV1061-40: RNCC: 3 | RNVC: 2
DV1061-5071-40: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-330-0374
Tube To Boss Straight Adapter

143300374
650-794-035-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-303-0043
Tube Fitting Brazing Ferrule

143030043
GSM163-011REP30-2F6: RNCC: 3 | RNVC: 2
GSM163-11AREP30-2: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-370-2586
Tube To Boss Straight Adapter

143702586
303-942-101-0: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-325-6232
Bulkhead Hose Connector

143256232
121B71-622-01-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-571-8949
Fluid Flow Restrictor

145718949
55-2553239-00: RNCC: 3 | RNVC: 2

23 May 2012

4730-14-362-0869
Tube Union

143620869
341-2 1-4: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-564-8841
Lubrication Fitting

145648841
D.B: RNCC: 3 | RNVC: 2

15 Jun 2010

4730-14-521-1792
Tube Tee

145211792
9133352: RNCC: 3 | RNVC: 2

12 Jul 2000

4730-14-263-4791
Tube Union

142634791
L261388: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-365-3007
Quick Disconnect Coupling Assembly

143653007
SJS40CDB: RNCC: 3 | RNVC: 2

19 Sep 1980

4730-14-375-8724
Fluid Pressure Line Multiple Connector

143758724
5000014250: RNCC: 3 | RNVC: 2
5000014630: RNCC: 5 | RNVC: 2
5000014250: RNCC: 5 | RNVC: 9
5000014630: RNCC: 5 | RNVC: 9

30 Mar 1982

4730-14-492-1523
Tube To Boss Straight Adapter

144921523
0000151512: RNCC: 3 | RNVC: 2
F300 0T 007 0749: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-530-8159
Tube-Hose Fitting Compression Sleeve

145308159
01240500: RNCC: 3 | RNVC: 2

8 Jul 2002

4730-14-253-7893
Tube Preforme De 25

142537893
B078CBDBRANGEE14: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-236-6335
Tube Fitting Clinch Sleeve

142366335
R5032: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-557-0839
Pipe To Hose Elbow

145570839
8095 1468: RNCC: 3 | RNVC: 2

6 May 2008

4730-14-576-1861
Flange To Tube Straight Adapter

145761861
M2821352020100: RNCC: 3 | RNVC: 2

4 Jun 2013

4730-14-564-3946
Hose Coupling

145643946
A430100100120: RNCC: 3 | RNVC: 2
222EB043: RNCC: 5 | RNVC: 2

27 Apr 2010

4730-14-355-5329

4730-14-370-2405
Tube To Boss Straight Adapter

143702405
303-958-101-0: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-334-9249
Self-Sealing Coupling Half

143349249
S0750-3-4ANUS: RNCC: 3 | RNVC: 2
85-688-3584: RNCC: 6 | RNVC: 9

2 Jun 1976

4730-14-567-2846
Hose Coupling

145672846
3447A0300-01: RNCC: 3 | RNVC: 2

2 Mar 2011

4730-14-387-8605
Collet Pour Tube

143878605
NO PRIMARY REF14-387-8605: RNCC: 3 | RNVC: 2
0026-142DN150: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-434-7905
Tube Tee

144347905
853-700-152-0: RNCC: 3 | RNVC: 2

4 Oct 1989

4730-14-319-4587
Sediment Strainer Element

143194587
3130S78-15-330: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-431-9472
Pipe Flange

144319472
UA50088012-LSFN-DE14: RNCC: 3 | RNVC: 2

17 May 1989

4730-14-222-6553
Tube Fitting Brazing Ferrule

142226553
GSM1297F1AF1BTABLEAU2D1-30I22: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-414-2315
Pipe Flange

144142315
U1240-11B2SPN150DN50Z2CND17-12T3: RNCC: 3 | RNVC: 2

27 Jan 1987

4730-14-446-0288
Tube To Hose Straight Adapter

144460288
GA10148-12: RNCC: 3 | RNVC: 2

4 Mar 1991

4730-14-550-1071
Tube Tee

145501071
GS47041-100: RNCC: 3 | RNVC: 2

1 Jun 2006

4730-14-397-7198
Tube To Boss Straight Adapter

143977198
NO PRIMARY REF14-397-7198: RNCC: 3 | RNVC: 2
Q1-5GE10LRK3-8BSPCOEQUIPE: RNCC: 5 | RNVC: 9

14 Dec 1984

4730-14-500-6628
Tube To Boss Straight Adapter

145006628
XGE08-SMA3C: RNCC: 3 | RNVC: 2
XGE08SMA3C: RNCC: 3 | RNVC: 2
F300 0T 024 6819: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-270-0111
Tube-Hose Fitting Compression Sleeve

142700111
7062BD1B10Z10CNT18-10: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-498-7363
Tube To Boss Straight Adapter

144987363
NO PRIMARY REF14-498-7363: RNCC: 3 | RNVC: 2
12-12-02-145: RNCC: 5 | RNVC: 9
121202145: RNCC: 5 | RNVC: 9
F300 0T 008 2311: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-365-3447

4730-14-281-6835
Bride A Zinc

142816835
109REPA: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-321-9512
Col De Cygne Double

143219512
301MA0167: RNCC: 3 | RNVC: 2
301MA167: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-288-6274
Pipe Flange

142886274
6784-2CA8: RNCC: 2 | RNVC: 2

1 Jan 1972

4730-14-448-5755
Tube Coupling

144485755
WBRAPL6-4/6: RNCC: 3 | RNVC: 2
WBRAPL6-4/6: RNCC: 3 | RNVC: 9

2 Jul 1991

4730-14-452-5636
Pipe Flange

144525636
LN320033F28DN150EXT168-3: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-362-5211
Tube Tee

143625211
130 1-2 1-4 1-2CD4: RNCC: 3 | RNVC: 2
E29801B1DBDL: RNCC: 5 | RNVC: 9
100009051: RNCC: 5 | RNVC: 9

19 Mar 1980

4730-14-564-5092
Tube To Boss Straight Adapter

145645092
8938031000: RNCC: 3 | RNVC: 2
A231004000101: RNCC: 5 | RNVC: 2

4 May 2010

4730-14-563-6568
Tube Elbow

145636568
A05051533: RNCC: 3 | RNVC: 2

3 Mar 2010

4730-14-309-5801
Bossage Prise Dair

143095801
0205460130: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-316-2931

4730-14-298-0206

4730-14-570-7545
Pipe Nipple

145707545
D040 05B: RNCC: 3 | RNVC: 2
003615: RNCC: 5 | RNVC: 2

20 Jan 2012

4730-14-425-8293
Sortie Raccord

144258293
9016CPV51012: RNCC: 3 | RNVC: 2

21 Jul 1988

4730-14-558-8176
Tube Cap

145588176
706A31140003: RNCC: 3 | RNVC: 2
BMNT7020: RNCC: 5 | RNVC: 9

12 Nov 2008

4730-14-260-9199

4730-14-306-8612

4730-14-042-4809
Equipe Raccord

140424809
74572: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-311-4459
Corps Raccord Tourn

143114459
A77717: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-575-7790
Flange To Tube Elbow

145757790
M2811350300100: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-289-9575
Diaphragme

142899575
01134026600: RNCC: 3 | RNVC: 2
011340266: RNCC: 5 | RNVC: 2
412968: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-336-4433
Tube To Boss Straight Adapter

143364433
0500176: RNCC: 3 | RNVC: 2
050-0176: RNCC: 5 | RNVC: 2
FOE0500176: RNCC: 5 | RNVC: 9

14 Aug 1976

4730-14-429-2351
Tube Coupling Nut Assembly

144292351
K1E-JET27P: RNCC: 3 | RNVC: 2
K1EJET27P: RNCC: 5 | RNVC: 2

11 Jan 1989

4730-14-455-3554
Tube Coupling

144553554
SKK12-12L-VG: RNCC: 3 | RNVC: 2
SMK12-12L-VG: RNCC: 5 | RNVC: 9
SMK12-12LVG: RNCC: 5 | RNVC: 9
SMK12-12L-VG: RNCC: 5 | RNVC: 9

21 May 1992

4730-14-237-6825
Fluid Pressure Line Multiple Connector

142376825
NO PRIMARY REF14-237-6825: RNCC: 3 | RNVC: 2
20-056: RNCC: 5 | RNVC: 9
20056: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-451-1039
Quick Disconnect Coupling Half

144511039
WA0633400+WA0613400: RNCC: 3 | RNVC: 2
183933: RNCC: 5 | RNVC: 2
WA06334-00+WD06134-00: RNCC: 5 | RNVC: 2

30 Oct 1991

4730-14-576-8038
Pipe Nipple

145768038
C632A2061201: RNCC: 3 | RNVC: 2
C632A2-0612-01: RNCC: 5 | RNVC: 2

16 Jul 2013

4730-14-321-9631
Pipe Flange

143219631
GSM147-005F13: RNCC: 3 | RNVC: 2
MEC10005: RNCC: 3 | RNVC: 2
GSM147-05F13: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-362-2677
Tube To Boss Straight Adapter

143622677
4DDR14-10: RNCC: 3 | RNVC: 2

30 Oct 2001

4730-14-491-5230
Hose To Boss Straight Adapter

144915230
NO PRIMARY REF14-491-5230: RNCC: 3 | RNVC: 2
5000034524: RNCC: 5 | RNVC: 9
F300 0T 003 2232: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-403-8930
Quick Disconnect Coupling Half

144038930
10-005-19: RNCC: 3 | RNVC: 2
1000-519: RNCC: 3 | RNVC: 2

11 Sep 1985

4730-14-339-8980
Tube Coupling Assembly

143398980
0-3601H16A: RNCC: 3 | RNVC: 2
0-3601H16A: RNCC: 5 | RNVC: 9
85-688-9368: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-14-435-3223
Tube To Boss Straight Adapter

144353223
F50XS25-1 1-16: RNCC: 3 | RNVC: 2

6 Nov 1989

4730-14-236-2178
Quick Disconnect Coupling Half

142362178
NO PRIMARY REF14-236-2178: RNCC: 3 | RNVC: 2
1310-4-84: RNCC: 5 | RNVC: 2
1310-4-84: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-566-8903
Pipeline Flexible Spacer

145668903
K 260 H 125 PN16 + CS + MAR: RNCC: 3 | RNVC: 2

11 Jan 2011

4730-14-374-8678
Tube To Boss Straight Adapter

143748678
4110-956: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-536-3572
Pipe-Tube Escutcheon

145363572
18975: RNCC: 3 | RNVC: 2

29 Jul 2003

4730-14-424-3494
Hydraulique Raccord

144243494
H0200001100NW0A: RNCC: 3 | RNVC: 2
15108E2: RNCC: 5 | RNVC: 9

19 May 1988

4730-14-244-1255

4730-14-548-2730
Quick Disconnect Coupling Half

145482730
NV1GASF: RNCC: 3 | RNVC: 2
R1QSPRF06F-1616: RNCC: 3 | RNVC: 2
V850009: RNCC: 5 | RNVC: 2

21 Dec 2005

4730-14-423-4728
Pipe Flange

144234728
UA50088006PN50-11LSFDN25: RNCC: 2 | RNVC: 2
4730HCPN50DN02511LSF: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-542-0323
Tube To Boss Straight Adapter

145420323
20062-538: RNCC: 3 | RNVC: 2
502103002042A: RNCC: 3 | RNVC: 9
2 0062-538: RNCC: 5 | RNVC: 2

2 Jul 2004

4730-14-540-7283
Anchor And Reinforcement Pipe Clamp

145407283
38051380: RNCC: 3 | RNVC: 2
437968: RNCC: 5 | RNVC: 2
4848ZG8613181187: RNCC: 6 | RNVC: 9

22 Apr 2004

4730-14-309-4583
Tube Tee

143094583
130CU16-14-16: RNCC: 3 | RNVC: 2
130CU16-14-16: RNCC: 5 | RNVC: 9
130TR16-14-16: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-349-7203
Bulkhead Hose Connector

143497203
0235630650: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-325-6789
Bulkhead Hose Connector

143256789
0000364620: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-543-8718
Tube To Boss Straight Adapter

145438718
560503484: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-546-5258
Tube To Boss Straight Adapter

145465258
GE12LM14X1.5CFX: RNCC: 3 | RNVC: 2
5010631794: RNCC: 5 | RNVC: 2

18 Jul 2005

4730-14-032-1597
Pipe Flange

140321597
CMT30E9037PL14ET15REP2: RNCC: 3 | RNVC: 2
15REP2: RNCC: 5 | RNVC: 2

5 Aug 1981

4730-14-554-1330
Tube Tee

145541330
352 708: RNCC: 3 | RNVC: 2
352 708: RNCC: 3 | RNVC: 2

12 Jun 2007

4730-14-489-0497
Quick Disconnect Coupling Half

144890497
300787: RNCC: 3 | RNVC: 2

18 Jun 1997

4730-14-499-1879
Grooved Clamp Connecting Coupling Half

144991879
61510001: RNCC: 3 | RNVC: 2
203024008009A: RNCC: 3 | RNVC: 2
203024008009A: RNCC: 3 | RNVC: 9

29 Oct 1997

4730-14-504-0575
Tube Coupling

145040575
NNP4730878750122: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-294-9955
Sediment Strainer Element

142949955
4854-07-25: RNCC: 3 | RNVC: 2
4854-25: RNCC: 5 | RNVC: 2
4854-25: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-348-1399
Tuyauteri Obturateu

143481399
60BRT266-12: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-451-3600
Fluid Flow Restrictor

144513600
540445DIA4-7: RNCC: 3 | RNVC: 2

14 Nov 1991

4730-14-393-0037
Tube Tee

143930037
5600107912: RNCC: 3 | RNVC: 2

12 Apr 1984

4730-14-478-1148
Tube-Hose Fitting Compression Sleeve

144781148
743 T 20: RNCC: 3 | RNVC: 2
743T20: RNCC: 5 | RNVC: 2
74743T20: RNCC: 5 | RNVC: 2

11 Oct 1995

4730-14-355-5678

4730-14-230-6054

4730-14-350-9770

4730-14-576-1852
Flange To Tube Straight Adapter

145761852
M2821351400000: RNCC: 3 | RNVC: 2

4 Jun 2013

4730-14-512-7237

4730-14-573-9892
Bulkhead Hose Connector

145739892
PF33019: RNCC: 3 | RNVC: 2

28 Nov 2012

4730-14-311-8529
Racc Couv Bloc Regu

143118529
0064581310: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-575-2463
Hose Clamp

145752463
142360: RNCC: 3 | RNVC: 2

21 Mar 2013

4730-14-301-4780

4730-14-262-6708
Feutre De Presse-Et

142626708
1222288: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-262-3058
Raccord

142623058
A73206: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-508-4780
Quick Disconnect Coupling Half

145084780
RBE06-7813: RNCC: 3 | RNVC: 2

14 Sep 1998

4730-14-223-2887
Bouchon Special

142232887
A10-77-060-12-0: RNCC: 3 | RNVC: 2
A10-77-060-12-0: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-359-4844
Bulkhead Hose Connector

143594844
A10-14-222-03-0: RNCC: 3 | RNVC: 2
A10-14-222-03-0: RNCC: 5 | RNVC: 2
85-691-1357: RNCC: 6 | RNVC: 9

2 Oct 1979

4730-14-473-6548
Tube Coupling Assembly

144736548
332A52-1027-20: RNCC: 3 | RNVC: 2

4 Jan 1995

4730-14-364-9959
Tube To Boss Straight Adapter

143649959
GSM164-058F5: RNCC: 3 | RNVC: 2
GSM164-042F21: RNCC: 5 | RNVC: 2

2 Sep 1980

4730-14-523-5372
Fluid-Emulsion Spray Nozzle

145235372
0001-05340004: RNCC: 3 | RNVC: 2
SYQ2504: RNCC: 5 | RNVC: 2
0001-5340004: RNCC: 5 | RNVC: 2

24 Jan 2001

4730-14-426-7854
Tube Tee

144267854
4730HEING088,9X16-76,1X10: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-362-2685
Tube Tee

143622685
RMT47-8: RNCC: 3 | RNVC: 2
99039846: RNCC: 5 | RNVC: 2
RMT47-8-260685: RNCC: 5 | RNVC: 2
99039846: RNCC: 5 | RNVC: 9
99039846: RNCC: 5 | RNVC: 9

20 Feb 1980

4730-14-426-7667
Tube Tee

144267667
4730HEING033,7X3,2-26,9X2: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-393-5627
Col De Cygne

143935627
MN7062RPF2/2: RNCC: 3 | RNVC: 9
MN7062RPF2-2: RNCC: 5 | RNVC: 9

7 Apr 1984

4730-14-310-3939
Pipeline Flexible Spacer

143103939
300081-1-2EGH80: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-317-4801
Tube Union

143174801
L4730-01F2-3-10: RNCC: 2 | RNVC: 2
4730AE-VIS10,2: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-219-7387
Raccord Vabco

142197387
UMA12 3-8C0: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-563-0594
Pressure Plug Retention Cap

145630594
HYD01-28: RNCC: 3 | RNVC: 2

17 Dec 2009

4730-14-426-7848
Tube Tee

144267848
4730HEING088,9X8-76,1X4,5: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-397-6978
Tube Tee

143976978
GSM164-059F6: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-557-4614
Suction Pump Connector

145574614
CM 02 51 01 24: RNCC: 3 | RNVC: 2

11 Jun 2008

4730-14-243-3593

4730-14-560-3322
Tube To Boss Straight Adapter

145603322
MMP25G: RNCC: 3 | RNVC: 2

9 Apr 2009

4730-14-327-5229

4730-14-558-2132
Tube Coupling

145582132
1529055: RNCC: 3 | RNVC: 2
1259055: RNCC: 5 | RNVC: 9

12 Sep 2008

4730-14-478-3028
Tube Coupling

144783028
591-0058-12X17: RNCC: 3 | RNVC: 2
5910058-12: RNCC: 5 | RNVC: 2

23 Oct 1995

4730-14-306-7027
Tube To Boss Straight Adapter

143067027
R32582SMPL11ET47UA10T2-375-250: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-393-1484
Tube Tee

143931484
BP7-14: RNCC: 3 | RNVC: 2

12 Apr 1984

4730-14-398-5787
Tube Tee

143985787
GSM164-025F15: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-513-4297
Adapter And Flange Assembly

145134297
NO PRIMARY REF14-513-4297: RNCC: 3 | RNVC: 2
NNP 1240860703013: RNCC: 5 | RNVC: 9

17 Mar 1999

4730-14-339-9010
Tube Tee

143399010
0-3901S25ADN8: RNCC: 3 | RNVC: 2
0-3901S25ADN8: RNCC: 5 | RNVC: 9
85-688-9613: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-14-436-1092
Flexible Tube Coupling Assembly

144361092
H7048A: RNCC: 5 | RNVC: 9
222-DN300-7ONDESEP0,8-Z6CNT17-11: RNCC: 5 | RNVC: 9

5 Dec 1989

4730-14-420-7444
Fluid Pressure Line Multiple Connector

144207444
P4-109-6JE10X100: RNCC: 3 | RNVC: 2
P41096: RNCC: 3 | RNVC: 2
F300 0T 022 1362: RNCC: 6 | RNVC: 9

16 Dec 1987

4730-14-360-0768
Fluid Passage Bolt

143600768
27-017: RNCC: 3 | RNVC: 2
27017: RNCC: 3 | RNVC: 2
85-691-2142: RNCC: 6 | RNVC: 9

31 Oct 1979

4730-14-303-0034
Tube Fitting Brazing Ferrule

143030034
GSM163-011REP30-1F6: RNCC: 3 | RNVC: 2
GSM163-11AREP30-1: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-424-0605
Hose To Boss Straight Adapter

144240605
NO PRIMARY REF14-424-0605: RNCC: 3 | RNVC: 2
531806: RNCC: 5 | RNVC: 9

11 May 1988

4730-14-539-1667
Tube-Hose Fitting Compression Sleeve

145391667
34-0278-06+34-0279-06: RNCC: 3 | RNVC: 2
SYQ4435: RNCC: 5 | RNVC: 2

9 Dec 2003

4730-14-463-1410
Prele Prise Raccord

144631410
2402-96-01: RNCC: 3 | RNVC: 2
85-694-8736: RNCC: 6 | RNVC: 9

26 May 1993

4730-14-548-8349
Self-Sealing Coupling Assembly

145488349
AQ5621-8-10-G 1/2": RNCC: 3 | RNVC: 2

16 Feb 2006

4730-14-345-6588
Tube-Hose Fitting Compression Sleeve

143456588
Q3-105-6P: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-276-9536
Tube To Boss Straight Adapter

142769536
160-63300-13: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-238-9051
Tube To Boss Straight Adapter

142389051
NO PRIMARY REF14-238-9051: RNCC: 3 | RNVC: 2
36F2: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-292-4513
Tube Coupling

142924513
341A62-1124-20: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-379-3125
Ecrou De Decharge

143793125
14601: RNCC: 3 | RNVC: 2

6 Sep 1982

4730-14-578-0387
Fluid Passage Bolt

145780387
0292911650: RNCC: 3 | RNVC: 2

24 Oct 2013

4730-14-336-1187

4730-14-344-1064

4730-14-505-5676
Quick Disconnect Coupling Half

145055676
RBE032904-0DIC: RNCC: 3 | RNVC: 2

25 Mar 1998

4730-14-559-1505
Tube To Hose Straight Adapter

145591505
DH 5182 40 03 07: RNCC: 3 | RNVC: 2

10 Dec 2008

4730-14-426-6506
Tube Tee

144266506
EVL20-PS: RNCC: 3 | RNVC: 2

15 Sep 1988

4730-14-328-3690
Tube To Boss Straight Adapter

143283690
F10A721005: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-423-0387
Sediment Strainer Element

144230387
L499015: RNCC: 3 | RNVC: 2
499015: RNCC: 5 | RNVC: 2
1707: RNCC: 5 | RNVC: 9
DBAL499015: RNCC: 5 | RNVC: 9

31 Mar 1988

4730-14-420-4813
Tube To Boss Straight Adapter

144204813
479363W: RNCC: 3 | RNVC: 2

10 Dec 1987

4730-14-518-4951
Tube To Boss Straight Adapter

145184951
380 017: RNCC: 3 | RNVC: 9

9 Feb 2000

4730-14-535-8131
Lubrication Fitting

145358131
36402916: RNCC: 3 | RNVC: 2

25 Jun 2003

4730-14-293-4415

4730-14-548-1977
Pipeline Flexible Spacer

145481977
A1/800/KG310-WG/P/PN10: RNCC: 3 | RNVC: 2
SA029147: RNCC: 5 | RNVC: 2

14 Dec 2005

4730-14-311-5731

4730-14-247-8559

4730-14-391-7766
Obtura Demi-Collier

143917766
DA2C525090253A1: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-350-8701

4730-14-238-5580

4730-14-223-2983

4730-14-576-1134
Pipe To Tube Straight Adapter

145761134
9036116: RNCC: 3 | RNVC: 2
111646Y: RNCC: 5 | RNVC: 2
Y00014190: RNCC: 5 | RNVC: 2

30 May 2013

4730-14-361-0867

4730-14-564-3608
Hose Coupling Assembly

145643608
MDS81F260: RNCC: 3 | RNVC: 2

26 Apr 2010

4730-14-354-3108
Racc Protect Plaque

143543108
11230600: RNCC: 3 | RNVC: 2
5787: RNCC: 5 | RNVC: 2
0003294525: RNCC: 5 | RNVC: 2
0003294525: RNCC: 5 | RNVC: 9
3294525: RNCC: 5 | RNVC: 9

30 Jan 1979

4730-14-227-1549
Genouillere Special

142271549
110587: RNCC: 3 | RNVC: 2
BFCSAMM110587: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-427-0343
Pipe Flange

144270343
MAT162-0022DN125FEM: RNCC: 3 | RNVC: 2
MAT162-0022F16: RNCC: 3 | RNVC: 2

5 Oct 1988

4730-14-410-5346
Tube Coupling

144105346
NO PRIMARY REF14-410-5346: RNCC: 3 | RNVC: 2
12-13498: RNCC: 5 | RNVC: 9
N8871201710: RNCC: 5 | RNVC: 9

2 Jul 1986

4730-14-367-5040
Tube To Boss Straight Adapter

143675040
EDE53260-01-08: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-406-7874
Tube Tee

144067874
GSM164-052F3: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-359-9233
Tube To Boss Straight Adapter

143599233
511-417-003REP21: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-476-5058
Pipe Fitting Assortment

144765058
4001-9-69: RNCC: 3 | RNVC: 2
85-691-3517: RNCC: 6 | RNVC: 9

14 Jun 1995

4730-14-564-5698
Tube Reducer

145645698
RED22/18LOMDCF: RNCC: 3 | RNVC: 2
A231004000343: RNCC: 5 | RNVC: 2

6 May 2010

4730-14-299-9929
Quick Disconnect Coupling Half

142999929
9959511: RNCC: 3 | RNVC: 2
9-95-95-11: RNCC: 5 | RNVC: 2
9959511: RNCC: 5 | RNVC: 2
56011210: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-397-1396
Tube To Boss Straight Adapter

143971396
RV6E10-3E10JMAL: RNCC: 3 | RNVC: 2
8603-359: RNCC: 5 | RNVC: 9

24 Jan 1996

4730-14-262-1702
Pipe Flange

142621702
7062DL1F1F36-4XC18: RNCC: 2 | RNVC: 2
MEC10322: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-505-3615
Fluid Pressure Line Multiple Connector

145053615
WH12-PSM-KD-0MD: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-235-6135
Fluid Passage Bolt

142356135
1050-27-700-39-0: RNCC: 3 | RNVC: 2
27-700-39-0: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-293-3218
Fluid Passage Bolt

142933218
453-07-02-074: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-315-5999
Tube To Boss Straight Adapter

143155999
Q1-52-10-16X150: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-402-0732
Fluid Pressure Line Multiple Connector

144020732
228863: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-401-3739
Bulkhead Hose Connector

144013739
893: RNCC: 3 | RNVC: 2

5 Jun 1985

4730-14-211-1716
Fluid Pressure Line Multiple Connector

142111716
28863: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-216-1233
Raccord Special

142161233
SKC160A: RNCC: 3 | RNVC: 2
0C540: RNCC: 5 | RNVC: 9
0C540: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-358-5144
Tube To Boss Straight Adapter

143585144
M16X1-5-1-4PTR81B: RNCC: 3 | RNVC: 2
5000783748: RNCC: 5 | RNVC: 2
5000783748: RNCC: 5 | RNVC: 9

7 Sep 1979

4730-14-262-1732
Pipe Flange

142621732
7062DL1F1F108-7-14CD2-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-289-9936

4730-14-295-7751

4730-14-203-6469
Raccord Vabco

142036469
UMA30-1C0: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-479-4755
Raccord Droit

144794755
501969-06: RNCC: 3 | RNVC: 2

15 Jan 1996

4730-14-549-4662
Tube To Boss Swivel Joint

145494662
0000301860: RNCC: 3 | RNVC: 2

6 Apr 2006

4730-14-339-3289
Lubrication Fitting

143393289
9200921: RNCC: 3 | RNVC: 9
0049388: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-350-7811
Tube To Boss Straight Adapter

143507811
620-844-677-0: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-535-3643
Bulkhead Hose Connector

145353643
93103521: RNCC: 3 | RNVC: 2
93103501: RNCC: 3 | RNVC: 9
5005630175: RNCC: 5 | RNVC: 2

22 May 2003

4730-14-506-1948
Pipe Flange

145061948
L068: RNCC: 3 | RNVC: 2
RAQ0339: RNCC: 5 | RNVC: 2

9 Apr 1998

4730-14-552-1136
Straight Tubing Connector

145521136
0249930510: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-566-4049
Tube Coupling

145664049
101338: RNCC: 3 | RNVC: 2

10 Nov 2010

4730-14-565-7866
Flange To Tube Elbow

145657866
0000373080: RNCC: 3 | RNVC: 2

22 Sep 2010

4730-14-563-3357
Pipeline Flexible Spacer

145633357
00003208-00: RNCC: 3 | RNVC: 2

27 Jan 2010

4730-14-571-4437
Fluid Passage Bolt

145714437
6783-0400: RNCC: 3 | RNVC: 2

27 Mar 2012

4730-14-364-0512
Tube To Boss Straight Adapter

143640512
365A75-2611-20: RNCC: 3 | RNVC: 2

7 Aug 1980

4730-14-397-7197
Contre-Bride

143977197
E64353200-122BF1122ETF12-22DN200: RNCC: 3 | RNVC: 2

14 Dec 1984

Load More Results