What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 160 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 160 of 185

4730-14-275-0293
Tube To Boss Straight Adapter

142750293
9105101366: RNCC: 3 | RNVC: 2
CA2-10-8-13C0: RNCC: 5 | RNVC: 9
CA2-10-8X13BSPC0S: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-573-1748
Hose Clamp

145731748
GBS M 55-59/20 SK W4: RNCC: 3 | RNVC: 2
A210606000129: RNCC: 3 | RNVC: 2

19 Sep 2012

4730-14-224-4287
Sediment Strainer Element

142244287
44148020000: RNCC: 3 | RNVC: 2
622035032: RNCC: 5 | RNVC: 2
203-50-32: RNCC: 5 | RNVC: 2
503-2: RNCC: 5 | RNVC: 2
620530053: RNCC: 5 | RNVC: 2
47A6107: RNCC: 5 | RNVC: 2
561338: RNCC: 5 | RNVC: 9
200-50-32: RNCC: 5 | RNVC: 9
2005032: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-428-9469
Pipe Flange

144289469
4730JAPN150DN150-11D1S-12,5: RNCC: 2 | RNVC: 2

28 Dec 1988

4730-14-410-7717
Quick Disconnect Coupling Half

144107717
RBE06-6810/IA/3: RNCC: 3 | RNVC: 2
RBE06-6810IA3: RNCC: 5 | RNVC: 2

9 Jul 1986

4730-14-268-9911
Fluid Pressure Line Multiple Connector

142689911
NO PRIMARY REF14-268-9911: RNCC: 3 | RNVC: 2
29-9-001267-0: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-391-7117
Tube Tee

143917117
788.D.06T.06.08: RNCC: 3 | RNVC: 2
788D06T06 08: RNCC: 5 | RNVC: 2
788D06T06-08: RNCC: 5 | RNVC: 2
788D06T0608: RNCC: 5 | RNVC: 2
74788D06T0608: RNCC: 5 | RNVC: 2
788 D 06T 06 08: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-524-0560
Tube Tee

145240560
111-R-5/8X5/8X1: RNCC: 3 | RNVC: 2

22 Feb 2001

4730-14-042-0346
Tube Coupling

140420346
0.311.20.08: RNCC: 3 | RNVC: 2
0-311-20-08: RNCC: 5 | RNVC: 2

6 Nov 1976

4730-14-574-3551
Bulkhead Hose Connector

145743551
332A52-1138-01: RNCC: 3 | RNVC: 2
332A52113801: RNCC: 5 | RNVC: 2

11 Jan 2013

4730-14-377-6680
Jeu Raccords En T

143776680
430-60-24: RNCC: 3 | RNVC: 2

10 Jun 1982

4730-14-333-5124
Barillet A 4 Voies

143335124
GSM163-005BF8: RNCC: 3 | RNVC: 2
GSM163-05BF8: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-262-1768

4730-14-268-6404

4730-14-311-8063

4730-14-207-1025
Fluid Pressure Line Multiple Connector

142071025
030758: RNCC: 3 | RNVC: 2
30758: RNCC: 3 | RNVC: 2
SBM207: RNCC: 5 | RNVC: 2
SBM207-1: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-575-4515
Adapter Bushing

145754515
510710: RNCC: 3 | RNVC: 2

8 Apr 2013

4730-14-558-0678
Boss Outlet

145580678
210779: RNCC: 3 | RNVC: 2

28 Aug 2008

4730-14-300-0298

4730-14-576-8212
Flange To Tube Straight Adapter

145768212
M2821350800000: RNCC: 3 | RNVC: 2

17 Jul 2013

4730-14-356-3524

4730-14-359-9268
Tube To Boss Straight Adapter

143599268
46-1685: RNCC: 3 | RNVC: 2
31640REP68: RNCC: 5 | RNVC: 2

15 Oct 1979

4730-14-400-7623
Support De Banjo

144007623
201392-0: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-479-1810
Hose Fitting Swaging Socket

144791810
FI 2.83.08.02: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-273-5125
Tube Coupling

142735125
7062BB1RPET2-14UA9: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-402-9797
Quick Disconnect Coupling Half

144029797
RBE08-2101JV: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-308-4392
Rampe De Graissage

143084392
773-413-081: RNCC: 3 | RNVC: 2
773-413-081: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-378-3251
Pipe Flange

143783251
E64-35-3212-112BBRIDEDN125: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-362-0159

4730-14-240-4747

4730-14-330-3923
Raccord De Cloison

143303923
RM2906: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-430-0263
Bloc Raccordement

144300263
2277-55-601: RNCC: 3 | RNVC: 2

24 Feb 1989

4730-14-337-2261

4730-14-345-1046

4730-14-363-5670

4730-14-470-9302
Adaptateur Hyd Att

144709302
332A91-7500-00: RNCC: 3 | RNVC: 2
F300 0T 017 5457: RNCC: 5 | RNVC: 9

13 Jul 1994

4730-14-273-5024
Tube To Boss Straight Adapter

142735024
7062BA1RCET1-14C337A: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-567-2506
Pipe Coupling

145672506
ABS1033-0606: RNCC: 1 | RNVC: 2
PE29205-06: RNCC: 3 | RNVC: 2

25 Feb 2011

4730-14-218-1213
Raccord Special

142181213
610-111-038-0: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-391-0234
Raccordement Embout

143910234
121E59-014-00-0: RNCC: 3 | RNVC: 2

1 Mar 1984

4730-14-301-7288

4730-14-449-5541
Tube Union

144495541
RACCORD IMP G1/2A EM L21,3: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-556-8591
Hose Clamp

145568591
028,6-706R: RNCC: 3 | RNVC: 2
7141292603: RNCC: 5 | RNVC: 2

16 Apr 2008

4730-14-395-3674
Embout A Souder

143953674
N0189F60A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-267-6446

4730-14-479-1820
Tube Fitting Socket Welded Ferrule

144791820
FI 4.51.63.02: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-365-9409

4730-14-322-5456

4730-14-568-9694
Adapter Bushing

145689694
MS22: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-568-5104
Fluid Pressure Line Multiple Connector

145685104
CN521B-06G18: RNCC: 3 | RNVC: 2
2529 4602-050: RNCC: 5 | RNVC: 2

9 Jun 2011

4730-14-381-8808
Bulkhead Hose Connector

143818808
2501-57-01141: RNCC: 3 | RNVC: 2

25 Jan 1983

4730-14-346-7024
Pipe Flange

143467024
6784-1CH14-8A: RNCC: 2 | RNVC: 2
MEC11351: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-541-5643
Tube Tee

145415643
TE-EGAL8D12-LAIT0N: RNCC: 3 | RNVC: 2

10 Jun 2004

4730-14-414-2314
Pipe Flange

144142314
U1240-11B2SPN150DN65Z2CND17-12T3: RNCC: 3 | RNVC: 2

27 Jan 1987

4730-14-501-2398
Tube To Boss Straight Adapter

145012398
471-475: RNCC: 3 | RNVC: 2
471.475: RNCC: 3 | RNVC: 2
F300 0T 025 2803: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-472-0744
Tube To Boss Straight Adapter

144720744
4A12-12-17CONU: RNCC: 3 | RNVC: 2
204100183NU: RNCC: 5 | RNVC: 2

5 Oct 1994

4730-14-418-6536
Pipe Flange

144186536
E29203-01B-PN16DN250BF42N: RNCC: 2 | RNVC: 2
MEC10718: RNCC: 3 | RNVC: 2
4730CJ-DN250: RNCC: 5 | RNVC: 2

9 Sep 1987

4730-14-335-9175
Fluid Pressure Line Multiple Connector

143359175
NO PRIMARY REF14-335-9175: RNCC: 3 | RNVC: 2
23625360: RNCC: 5 | RNVC: 9

24 Jul 1976

4730-14-450-7469
Tube Tee

144507469
4730HEINGCH114,3X8,8-60,3X8,8: RNCC: 2 | RNVC: 2

21 Oct 1991

4730-14-511-7856
Tube Tee

145117856
121S75-448-71-0: RNCC: 3 | RNVC: 2

20 Jan 1999

4730-14-273-5037
Tube Coupling

142735037
7062BA1RPET1-41-5C337A: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-256-9327
Pipe Flange

142569327
RUHB2-30: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-508-8146
Tube To Boss Straight Adapter

145088146
00132973: RNCC: 3 | RNVC: 2
136250-00-12: RNCC: 5 | RNVC: 9
136250.00.12: RNCC: 5 | RNVC: 9

30 Sep 1998

4730-14-305-6258
Tube Tee

143056258
9108343547: RNCC: 3 | RNVC: 2
I14-34-26-34BR: RNCC: 5 | RNVC: 9
I14-34-26X34BRHP: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-432-3005
Haute Press Bouchon

144323005
HK050CK11-111: RNCC: 3 | RNVC: 2
HK050-CK11-111: RNCC: 3 | RNVC: 2
91762170: RNCC: 5 | RNVC: 2
HK050-CK11-111: RNCC: 5 | RNVC: 9

2 Jun 1989

4730-14-208-2698
Tube To Boss Straight Adapter

142082698
P4-13-14-12-17NU: RNCC: 3 | RNVC: 2
000574282P: RNCC: 5 | RNVC: 2
0UT1-148: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-423-4296
Pipe Flange

144234296
UA50088006PN150-11C1DN65: RNCC: 2 | RNVC: 2
4730HCPN150DN06511C1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-515-9212
Check Valve Adapter

145159212
2402-85-07: RNCC: 3 | RNVC: 2

26 Aug 1999

4730-14-273-5062
Tube Coupling

142735062
7062BA1RPET1-14UE10Z1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-268-1154
Pipe Flange

142681154
6784-1CE20: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-329-9360
Raccord Double Guil

143299360
BN320-556DN65DN80: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-317-9369
Fluid Passage Bolt

143179369
341A75-5000-21: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-031-2873
Tube To Boss Straight Adapter

140312873
3097-105-0: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-242-6124

4730-14-563-2798
Fluid Flow Restrictor

145632798
25635: RNCC: 3 | RNVC: 2
31854: RNCC: 5 | RNVC: 9

20 Jan 2010

4730-14-211-0425
Raccord Orientable

142110425
109-4NN: RNCC: 3 | RNVC: 2
109-4-8X100P256: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-525-5511
Pipe To Tube Straight Adapter

145255511
F8052 870304: RNCC: 3 | RNVC: 2
870304: RNCC: 5 | RNVC: 2
UNION MALE T12-16X150 DIN L: RNCC: 5 | RNVC: 2
DUF870304: RNCC: 5 | RNVC: 9

14 Jun 2001

4730-14-438-3828
Tube To Boss Straight Adapter

144383828
4730HL-1DE26,9: RNCC: 2 | RNVC: 2
Y07134-01-0000P001DE26,9: RNCC: 3 | RNVC: 2

19 Mar 1990

4730-14-260-9107
Pipe Flange

142609107
7062CA1F1-48AF42-2: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-203-3713
Tube To Boss Straight Adapter

142033713
676-312-018-0: RNCC: 3 | RNVC: 2
85-100-5738: RNCC: 6 | RNVC: 9

1 Jan 1963

4730-14-409-9389
Fluid Pressure Line Multiple Connector

144099389
1342-02: RNCC: 3 | RNVC: 2
9151592080: RNCC: 5 | RNVC: 2
9151592080: RNCC: 5 | RNVC: 2

4 Jun 1986

4730-14-301-3229
Self-Sealing Coupling Assembly

143013229
A25111-10: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-041-2330
Tube To Boss Straight Adapter

140412330
Q1-52-20-15X21C0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-440-6216
Tube Coupling

144406216
TBI25-30: RNCC: 3 | RNVC: 9
91630387: RNCC: 5 | RNVC: 2

18 Jul 1990

4730-14-464-7269
Anchor And Reinforcement Pipe Clamp

144647269
SP217,2PP-IS: RNCC: 3 | RNVC: 2

27 Aug 1993

4730-14-390-0067
Tube Tee

143900067
DHS613-646-67: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-328-6517
Pour Valve Raccord

143286517
00410: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-460-7023
Tube Union

144607023
60100606: RNCC: 3 | RNVC: 2
91726551: RNCC: 5 | RNVC: 2
60 10 06 06: RNCC: 5 | RNVC: 9

4 Feb 1993

4730-14-368-8587
Raccord De Decharge

143688587
411629: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-042-8475

4730-14-267-9902

4730-14-490-3045
Special-Shaped Hose Clamp

144903045
A02400-00-0000P004: RNCC: 3 | RNVC: 2

24 Sep 1997

4730-14-560-4768
Quick Disconnect Wye

145604768
5005330181: RNCC: 1 | RNVC: 2
3440-06-00: RNCC: 3 | RNVC: 2
25312585: RNCC: 5 | RNVC: 2

23 Apr 2009

4730-14-311-1152
Tube To Boss Straight Adapter

143111152
773-411-025FF21: RNCC: 3 | RNVC: 2
773-411-020DET68: RNCC: 5 | RNVC: 9
773-411-025FF21: RNCC: 5 | RNVC: 9
R29182SMDET68: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-347-7480
Tube Tee

143477480
GSM524-038F19: RNCC: 3 | RNVC: 2
A0348-001F21: RNCC: 5 | RNVC: 2
GSM524038F19: RNCC: 5 | RNVC: 2

1 Mar 1978

4730-14-210-9742
Tube To Boss Straight Adapter

142109742
12-25-30X150: RNCC: 3 | RNVC: 2
UMA25X30-150N: RNCC: 3 | RNVC: 2
4A25-30X150: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-526-3725
Fluid Passage Bolt

145263725
43312AG100: RNCC: 2 | RNVC: 2
L43312-100AG: RNCC: 5 | RNVC: 2

25 Jul 2001

4730-14-552-2285
Quick Disconnect Coupling Half

145522285
RBE11-1153/IC: RNCC: 3 | RNVC: 2

5 Dec 2006

4730-14-313-6740
Fluid Pressure Line Multiple Connector

143136740
606-10-90ARSK: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-413-9137
Tube To Boss Straight Adapter

144139137
P4-12-18-22X150NU: RNCC: 3 | RNVC: 2
MAF0001006784: RNCC: 6 | RNVC: 9

22 Jan 1987

4730-14-417-6255
Hydraulic Accumulator

144176255
081120-01920: RNCC: 3 | RNVC: 2

21 Jul 1987

4730-14-368-9172
Ensem Bride A Joint

143689172
B0311F28B: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-430-8220
Equipe Raccord

144308220
311472-1: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-570-8591
Pipe Elbow

145708591
CMJ 78 211 F: RNCC: 3 | RNVC: 2
CMJ 78 211 F: RNCC: 5 | RNVC: 2

30 Jan 2012

4730-14-266-1175

4730-14-274-4440

4730-14-567-8513
Tube Elbow

145678513
0199 06 13: RNCC: 3 | RNVC: 2

18 Apr 2011

4730-14-275-0313
Tube Fitting Clinch Sleeve

142750313
U1134F12-8: RNCC: 2 | RNVC: 2
9124080050: RNCC: 5 | RNVC: 2
BCS8: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-421-5907
Hose To Boss Straight Adapter

144215907
5-454309: RNCC: 3 | RNVC: 9

20 Jan 1988

4730-14-269-1998
Pipe Flange

142691998
7066ED1M63-5: RNCC: 2 | RNVC: 2
4730BH-63,5M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-540-6514
Anchor And Reinforcement Pipe Clamp

145406514
38051364: RNCC: 3 | RNVC: 2
437394: RNCC: 5 | RNVC: 2
4848ZG8613180194: RNCC: 6 | RNVC: 9

14 Apr 2004

4730-14-210-5582
Tube To Boss Straight Adapter

142105582
70855025: RNCC: 3 | RNVC: 2
70855025: RNCC: 5 | RNVC: 9
855025: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-323-9216
Pipe Flange

143239216
7062TD1F1F133UE12: RNCC: 2 | RNVC: 2

1 Jan 1975

4730-14-449-5489
Tube Union

144495489
RACCORD IMP G1/4A BB S13,5: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-249-6692
Bague Speciale

142496692
6115-1297: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-463-4639
Fluid Flow Restrictor

144634639
BN324598-33,7: RNCC: 2 | RNVC: 2

15 Jun 1993

4730-14-376-9287
Tube Coupling

143769287
95MS011-206: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-412-1295
Tube To Boss Straight Adapter

144121295
LV117-CH0804N: RNCC: 3 | RNVC: 2
M4HZ745P2032: RNCC: 5 | RNVC: 2
UMCA8X8-13NCJ8: RNCC: 5 | RNVC: 2

8 Oct 1986

4730-14-257-2114
Fluid Passage Bolt

142572114
330A75-2144-20: RNCC: 3 | RNVC: 2
330A75-2144-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-295-3371
Tube To Boss Straight Adapter

142953371
341A75-5010-20: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-461-4561
Tube Coupling

144614561
BC137A010-104: RNCC: 3 | RNVC: 9
1003933P00: RNCC: 5 | RNVC: 2

10 Mar 1993

4730-14-459-6003
Tube To Hose Straight Adapter

144596003
31010419: RNCC: 3 | RNVC: 2
2426725040: RNCC: 5 | RNVC: 2
8043705X00: RNCC: 5 | RNVC: 2
222-9196: RNCC: 5 | RNVC: 2
24267250: RNCC: 5 | RNVC: 9

10 Dec 1992

4730-14-377-1712
Tube To Boss Straight Adapter

143771712
612-17-1BRT: RNCC: 3 | RNVC: 2

17 May 1982

4730-14-407-4263
Quick Disconnect Coupling Half

144074263
PSP06-1116/LD/CP: RNCC: 3 | RNVC: 2
PSP06-1116LNSCP: RNCC: 5 | RNVC: 2

12 Feb 1986

4730-14-222-6547
Tube Fitting Brazing Ferrule

142226547
GSM1297F1AF1BTABLEAU2D1-20I11: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-371-5502
Tube To Boss Straight Adapter

143715502
365A75-2847-01: RNCC: 3 | RNVC: 2

7 Mar 1996

4730-14-357-5586
Tube To Boss Straight Adapter

143575586
P4G1509-13-20X150TF: RNCC: 3 | RNVC: 2

30 Oct 2001

4730-14-422-8597
Fluid Pressure Line Multiple Connector

144228597
WH08SRA3C: RNCC: 3 | RNVC: 2
WH08SRA3C: RNCC: 3 | RNVC: 9
WHO8-PSR: RNCC: 5 | RNVC: 9

23 Mar 1988

4730-14-300-1703
Tube Fitting Brazing Ferrule

143001703
43211CC08: RNCC: 2 | RNVC: 2
44211CC08: RNCC: 5 | RNVC: 2
L43211-8CC: RNCC: 5 | RNVC: 2
L44211-8CC: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-268-1234
Plaque De Reduction

142681234
6784-1DH50-20: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-425-2408
Raccord

144252408
0910-516-000: RNCC: 3 | RNVC: 2
0910-516: RNCC: 5 | RNVC: 2

28 Jun 1988

4730-14-340-1175

4730-14-367-7251

4730-14-367-3979

4730-14-359-9051
Filtre

143599051
2-15814: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-370-2534
Equip Bague Raccord

143702534
303-957-001-0: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-223-8683
Raccord A Joint Cou

142238683
GSM1297FE4-33TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-377-3059
Tube To Boss Straight Adapter

143773059
717.C.08.12X1,00: RNCC: 3 | RNVC: 2
P156C08: RNCC: 3 | RNVC: 2
717C08: RNCC: 3 | RNVC: 2
164165: RNCC: 5 | RNVC: 2
717 C 08 12X1,00: RNCC: 5 | RNVC: 2
717C08: RNCC: 5 | RNVC: 2
717C08 12 100: RNCC: 5 | RNVC: 2
717C08-12X100: RNCC: 5 | RNVC: 2
717C0812100: RNCC: 5 | RNVC: 2
74717C08: RNCC: 5 | RNVC: 2

17 May 1982

4730-14-499-4777
Tube To Boss Straight Adapter

144994777
A.GEV-06L-R1.8INOX: RNCC: 3 | RNVC: 2
A.GEV-06L-R1.8IN0X: RNCC: 5 | RNVC: 2
AGEV06LR1-8IN0X: RNCC: 5 | RNVC: 2
A.GEV-06L-R1.8IN0X: RNCC: 5 | RNVC: 2
F300 0T 022 8101: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-561-7888
Tube To Gas Fitting Straight Adapter

145617888
RAST1BX098NL006: RNCC: 3 | RNVC: 2

7 Sep 2009

4730-14-325-8912
Tube To Boss Straight Adapter

143258912
UNI0N9-4-6X1-8NPTC0: RNCC: 3 | RNVC: 2
UNI0N9-4-6X1-8NPTC0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-403-4259
Rampe Arrosage Buse

144034259
812717: RNCC: 3 | RNVC: 2
W14377-96: RNCC: 5 | RNVC: 2

21 Aug 1985

4730-14-443-4765
Tube To Boss Straight Adapter

144434765
2-535043-9: RNCC: 3 | RNVC: 2
2-535043-9: RNCC: 5 | RNVC: 9

26 Nov 1990

4730-14-412-3326
Quick Disconnect Coupling Half

144123326
RBE11-1152/IC/9: RNCC: 3 | RNVC: 2
RBE11-1152IC9: RNCC: 5 | RNVC: 2

8 Oct 1986

4730-14-249-7608
Tube To Boss Straight Adapter

142497608
52-8-12X125RR: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-333-5219
Barillet A 5 Voies

143335219
GSM163-021F6: RNCC: 3 | RNVC: 2
GSM163-21F6: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-432-6198
Sediment Strainer Element

144326198
BM65DIAM30X3: RNCC: 3 | RNVC: 2

16 Jun 1989

4730-14-307-8459
Bossage Special

143078459
B252FD2AREP1: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-562-5216
Tube Elbow

145625216
3199 06 19: RNCC: 3 | RNVC: 2
FS0002362: RNCC: 6 | RNVC: 9

2 Nov 2009

4730-14-210-9777
Te De Reduction

142109777
1TR8X12X12: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-571-0935
Flange To Flange Straight Adapter

145710935
M2821316520000: RNCC: 3 | RNVC: 2

20 Feb 2012

4730-14-578-6713
Special Nipple

145786713
B015476: RNCC: 3 | RNVC: 2

17 Dec 2013

4730-14-297-8936
Bloc De Derivation

142978936
411MA0162FA18: RNCC: 3 | RNVC: 2
411MA162FA18: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-223-6565

4730-14-277-6205

4730-14-232-6386

4730-14-224-3914
Tube Fitting Brazing Ferrule

142243914
GSM163-002F7-36-1-30: RNCC: 3 | RNVC: 2
GSM163-02F7-36-1-30: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-347-8062
Tube To Boss Straight Adapter

143478062
99621121271: RNCC: 3 | RNVC: 2
12-121-4BGS: RNCC: 3 | RNVC: 2
99-621-12-127-1: RNCC: 5 | RNVC: 2

1 Mar 1978

4730-14-403-0337
Tube To Boss Straight Adapter

144030337
F6XS16-1/2: RNCC: 3 | RNVC: 2
F6XS16-1-2: RNCC: 5 | RNVC: 2

25 Jul 1985

4730-14-333-4035
Tube Coupling Assembly

143334035
0-3601S20A: RNCC: 3 | RNVC: 2
0-3601S20A: RNCC: 5 | RNVC: 9
85-688-9381: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-480-7844
Diaphragme Limiteur

144807844
HSNGT1340AF8C: RNCC: 3 | RNVC: 2

29 Mar 1996

4730-14-573-7394
Tube To Boss Straight Adapter

145737394
1805 10 13: RNCC: 3 | RNVC: 2

7 Nov 2012

4730-14-526-1196
Tube Union

145261196
20 242 230 1440: RNCC: 3 | RNVC: 2

4 Jul 2001

4730-14-296-7161

4730-14-031-3754
Tuyau Collier

4730-14-334-2455
Tube Tee

143342455
GSM163-004BF19: RNCC: 3 | RNVC: 2
GSM163-04BF19: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-575-3348
Hose Clamp

145753348
NO PRIMARY REF 14-575-3348: RNCC: 3 | RNVC: 2
CGCL00182: RNCC: 5 | RNVC: 2
CP18S9: RNCC: 5 | RNVC: 2

28 Mar 2013

4730-14-388-5805
Fluid Passage Bolt

143885805
078-01-108-01: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-353-4122
Piece De Raccordeme

143534122
GSM166-017F26: RNCC: 3 | RNVC: 2
A0291-001F25: RNCC: 5 | RNVC: 2
GSM166-17F26: RNCC: 5 | RNVC: 2

8 Dec 1978

4730-14-562-6042
Pipeline Flexible Spacer

145626042
R1/80/KR 320-WG/E: RNCC: 3 | RNVC: 2
GR1/80/KR320-WG/E: RNCC: 3 | RNVC: 9

6 Nov 2009

4730-14-439-6308
Raccord Fusible

144396308
38400B25-21: RNCC: 3 | RNVC: 2
704A34-423-024: RNCC: 5 | RNVC: 2
38400B25-21: RNCC: 5 | RNVC: 2

16 May 1990

4730-14-264-6627
Tube Tee

142646627
134 3-4Z: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-290-2846
Support Raccord Mul

142902846
330A75-2158-00: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-414-6630
Threaded Tube Fitting Plug

144146630
4730HK-BRF13,5: RNCC: 2 | RNVC: 2
MEC10489: RNCC: 3 | RNVC: 2

20 Feb 1987

4730-14-496-5614
Union

144965614
5010045516: RNCC: 3 | RNVC: 2
F300 0T 021 7116: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-323-4257
Pipeline Flexible Spacer

143234257
SIF701RR00101A: RNCC: 3 | RNVC: 2
C3040AK1B: RNCC: 5 | RNVC: 2
C3040AK1A: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-492-1530
Fluid Passage Bolt

144921530
0000151974: RNCC: 3 | RNVC: 2
F300 0T 007 0759: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-540-9889
Tube-Hose Fitting Compression Sleeve

145409889
PMEM50V20: RNCC: 3 | RNVC: 2

5 May 2004

4730-14-303-3397
Fluid Passage Bolt

143033397
L329031: RNCC: 3 | RNVC: 2
3032180: RNCC: 5 | RNVC: 2
8092454: RNCC: 5 | RNVC: 2
329031: RNCC: 5 | RNVC: 2
35107: RNCC: 5 | RNVC: 2
DBAL329031: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-378-4534
Tube To Boss Straight Adapter

143784534
A82898: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-397-5644
Flange To Tube Elbow

143975644
0000157552: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-512-7532
Anchor And Reinforcement Pipe Clamp

145127532
800039554: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-395-3790
Tube Coupling

143953790
N0162F19A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-353-6669
Bulkhead Hose Connector

143536669
R6X12X10S: RNCC: 3 | RNVC: 2

16 Jan 1979

4730-14-378-4537
Fluid Pressure Line Multiple Connector

143784537
A87549: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-362-7592
Bulkhead Hose Connector

143627592
851: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-400-1792
Tube To Boss Straight Adapter

144001792
CPH8E4079101: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-547-5708
Hose To Boss Straight Adapter

145475708
0191 13 21: RNCC: 3 | RNVC: 2

17 Oct 2005

4730-14-407-3919
Pipe Flange

144073919
23326: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-382-8712
Tube To Boss Straight Adapter

143828712
PE60807H18: RNCC: 3 | RNVC: 2

26 Jul 2000

4730-14-327-6211
Fluid Pressure Line Multiple Connector

143276211
0264752710: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-471-6557
Expansion Douille

144716557
MB800-040: RNCC: 3 | RNVC: 2
000929862U: RNCC: 5 | RNVC: 2
U9298-62: RNCC: 5 | RNVC: 2

7 Sep 1994

4730-14-495-3820
Union

144953820
G23375-88: RNCC: 3 | RNVC: 2
F300 0T 019 1727: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-395-1579
Quick Disconnect Wye

143951579
RBE11-8103: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-310-4252
Tube Repair Plug

143104252
K1712DREP5TAMH16: RNCC: 3 | RNVC: 2
K79-12REP14TAMP0N: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-342-1680
Tube To Boss Straight Adapter

143421680
3210-94-33-041: RNCC: 3 | RNVC: 2
85-688-7353: RNCC: 6 | RNVC: 9

14 Apr 1977

4730-14-472-0335
Raccord Flexible

144720335
MAT166-3009: RNCC: 3 | RNVC: 2

5 Oct 1994

4730-14-387-8620
Collet Pour Tube

143878620
NO PRIMARY REF14-387-8620: RNCC: 3 | RNVC: 2
0026-599DN40: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-365-6787
Fluid Pressure Line Multiple Connector

143656787
ES409-96: RNCC: 3 | RNVC: 2
0024319304: RNCC: 5 | RNVC: 2
0024319304: RNCC: 5 | RNVC: 9

8 Oct 1980

4730-14-369-7006
Quick Disconnect Coupling Half

143697006
RBE19-1155/OD/IC/0/FB: RNCC: 3 | RNVC: 2
RBE19-11550DIC0FB: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-387-8859
Tube Tee

143878859
P165B081008: RNCC: 3 | RNVC: 2
713.B.08.10.08: RNCC: 3 | RNVC: 2
713B08-10-08: RNCC: 5 | RNVC: 2
713B081008: RNCC: 5 | RNVC: 2
74713B081008: RNCC: 5 | RNVC: 2
713 B 08 10 08: RNCC: 5 | RNVC: 2
713B08 10 08: RNCC: 5 | RNVC: 2
74713B081008: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-434-9606
Flexible Tube Coupling Assembly

144349606
5-34767-00-2: RNCC: 3 | RNVC: 2

11 Oct 1989

4730-14-369-6667
Solder Type Tube Fitting Plug

143696667
GSM164-043F13-1: RNCC: 3 | RNVC: 2
MEC10784: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-389-5150
Fluid Pressure Line Multiple Connector

143895150
365A75-2653-21: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-365-6686
Fluid Pressure Line Multiple Connector

143656686
9DM8-14X150: RNCC: 3 | RNVC: 2

8 Oct 1980

4730-14-554-7890
Fluid-Emulsion Spray Nozzle

145547890
7517-0211: RNCC: 3 | RNVC: 2

23 Aug 2007

4730-14-242-1954
Fluid Passage Bolt

142421954
002026: RNCC: 3 | RNVC: 2
3295-06T04-06E: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-252-2602
Tube Coupling

142522602
ESQ1-52-39TF: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-424-3544
Quick Disconnect Coupling Half

144243544
77301-14: RNCC: 3 | RNVC: 2

19 May 1988

4730-14-454-6698
Bulkhead Hose Connector

144546698
4654-10: RNCC: 3 | RNVC: 2
3865-749: RNCC: 3 | RNVC: 2
9404654108: RNCC: 5 | RNVC: 2

9 Apr 1992

4730-14-504-5989
Tube To Boss Straight Adapter

145045989
09930045: RNCC: 3 | RNVC: 2

25 Feb 1998

4730-14-549-5482
Tube Coupling

145495482
16558: RNCC: 3 | RNVC: 2

13 Apr 2006

4730-14-362-9736
Tube To Boss Straight Adapter

143629736
0000466199: RNCC: 3 | RNVC: 2
0000466199: RNCC: 5 | RNVC: 9
466199: RNCC: 5 | RNVC: 9

3 Apr 1980

4730-14-238-5661

4730-14-268-1114

4730-14-443-2867

4730-14-419-4754
Fluid Pressure Line Multiple Connector

144194754
DMSE1PEL24B52C54PSR: RNCC: 3 | RNVC: 2
M4ZS460D8234: RNCC: 5 | RNVC: 2

21 Oct 1987

4730-14-526-9946
Tube Coupling

145269946
506063: RNCC: 3 | RNVC: 2

21 Sep 2001

4730-14-341-9007

4730-14-275-0495

4730-14-379-5717
Tube Union

143795717
36V10: RNCC: 3 | RNVC: 2
85-101-0977: RNCC: 6 | RNVC: 9

1 Oct 1982

4730-14-263-1984
Raccord Droit

142631984
NO PRIMARY REF14-263-1984: RNCC: 3 | RNVC: 2
417859: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-355-8912
Tube To Boss Straight Adapter

143558912
12-10-5-10C0: RNCC: 3 | RNVC: 2
UMCA10X5-10N: RNCC: 3 | RNVC: 2
4A10-5-10C0: RNCC: 3 | RNVC: 2
4A10-5-10C0: RNCC: 3 | RNVC: 9
4A10-5-10C: RNCC: 5 | RNVC: 9

5 Apr 1979

4730-14-359-9839
Fluid Passage Bolt

143599839
702A30-0319-20: RNCC: 3 | RNVC: 2

31 Oct 1979

4730-14-479-4084
Bulkhead Hose Connector

144794084
726.D.08.08S.BR: RNCC: 3 | RNVC: 2
P426D0808SBR: RNCC: 3 | RNVC: 2
726D08-08SBR: RNCC: 5 | RNVC: 2
726D0808SBR: RNCC: 5 | RNVC: 2
726 D 08 08S BR: RNCC: 5 | RNVC: 2
726D08 08SBR: RNCC: 5 | RNVC: 2
74726D0808SBR: RNCC: 5 | RNVC: 2
74726D0808SBR: RNCC: 5 | RNVC: 2

10 Jan 1996

4730-14-560-7086
Pipe To Tube Elbow

145607086
V0337084: RNCC: 3 | RNVC: 2
CV149898: RNCC: 5 | RNVC: 2
V0337084: RNCC: 5 | RNVC: 2

19 May 2009

4730-14-557-2719
Tube Elbow

145572719
0R/C28000556: RNCC: 3 | RNVC: 2

29 May 2008

4730-14-227-2243
Raccord Special

142272243
DLT032240: RNCC: 3 | RNVC: 2
29-9-002315-0: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-271-0943
Obturateur Element

142710943
AQ8-0-1A: RNCC: 3 | RNVC: 2
501-716-545-0: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-422-2562
Tube Union

144222562
415-12-12-17: RNCC: 3 | RNVC: 2

24 Feb 1988

4730-14-556-5578
Hose To Gas Fitting Straight Adapter

145565578
MAT388-0042F2: RNCC: 3 | RNVC: 2

21 Mar 2008

4730-14-225-2112
Raccord Droit De Bo

142252112
D2604-2-135: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-470-0355
Tube Union

144700355
380026-Z2CN18-10: RNCC: 3 | RNVC: 2

25 May 1994

4730-14-562-6030
Pipeline Flexible Spacer

145626030
R1/40/KR 320-WG/E/AV: RNCC: 3 | RNVC: 2

6 Nov 2009

4730-14-576-5522
Quick Disconnect Coupling Half

145765522
R987082418: RNCC: 3 | RNVC: 2

25 Jun 2013

4730-14-294-0666

4730-14-450-0125
Tube Coupling

144500125
270-3/4: RNCC: 3 | RNVC: 2
91498417: RNCC: 5 | RNVC: 2

18 Sep 1991

4730-14-437-6867
Pipe Expansion Joint

144376867
2-541819-2: RNCC: 3 | RNVC: 2
2-541819-2: RNCC: 5 | RNVC: 9

7 Feb 1990

4730-14-388-5858
Equipe Raccord

143885858
NO PRIMARY REF14-388-5858: RNCC: 3 | RNVC: 2
339836: RNCC: 5 | RNVC: 9

3 Nov 1983

4730-14-571-5881
Hose Clamp

145715881
ABS0901-180: RNCC: 1 | RNVC: 2
901180: RNCC: 3 | RNVC: 2
ABS0901-180: RNCC: 5 | RNVC: 2

11 Apr 2012

4730-14-373-1712
Raccord Encastre

143731712
N003-226-80: RNCC: 3 | RNVC: 2
N003226-79: RNCC: 5 | RNVC: 2
003-226-79: RNCC: 5 | RNVC: 9

21 Oct 1981

4730-14-522-7915
Hose To Grooved Clamp Coupling Straight Adapter

145227915
EBB14/18: RNCC: 3 | RNVC: 2
EBB14/18: RNCC: 5 | RNVC: 9

23 Nov 2000

4730-14-492-3302
Tube To Boss Straight Adapter

144923302
NO PRIMARY REF14-492-3302: RNCC: 3 | RNVC: 2
5000042685: RNCC: 5 | RNVC: 9
F300 0T 007 4027: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-413-4671
Tube To Boss Straight Adapter

144134671
GE15L1/2NPT71: RNCC: 3 | RNVC: 2
GE15L1/2NPT71: RNCC: 3 | RNVC: 2
GE15PL1/2NPT1.4571: RNCC: 5 | RNVC: 2
GE15PL1/2NPT71: RNCC: 5 | RNVC: 2
RAR1382: RNCC: 5 | RNVC: 2

17 Dec 1986

4730-14-270-1911
Tube Tee

142701911
NO PRIMARY REF14-270-1911: RNCC: 3 | RNVC: 2
0172775L00: RNCC: 5 | RNVC: 2
59941: RNCC: 5 | RNVC: 9
59941: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-454-6083
Tube To Boss Straight Adapter

144546083
110051: RNCC: 3 | RNVC: 2
LV115-CS0804L: RNCC: 3 | RNVC: 2
UMA8X8.13L: RNCC: 5 | RNVC: 2

8 Apr 1992

4730-14-379-6964
Fluid Pressure Line Multiple Connector

143796964
30-142-3201: RNCC: 3 | RNVC: 2
301423201: RNCC: 5 | RNVC: 2
25428560: RNCC: 5 | RNVC: 9

20 Oct 1982

4730-14-423-4626
Pipe Flange

144234626
UA50088006PN420-11B2SDN50: RNCC: 2 | RNVC: 2
4730HCPN420DN05011B2S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-525-1005
Lubricant Pressure Relief Fitting

145251005
NO PRIMARY REF 14-525-1005: RNCC: 3 | RNVC: 2
VPNH14: RNCC: 5 | RNVC: 9
VP14: RNCC: 5 | RNVC: 9

18 May 2001

4730-14-387-8502
Tube To Boss Straight Adapter

143878502
NO PRIMARY REF14-387-8502: RNCC: 3 | RNVC: 2
0026-125DN20: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-250-5170
Sediment Strainer Element

142505170
NO PRIMARY REF14-250-5170: RNCC: 3 | RNVC: 2
106856: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-422-8692
Tube Coupling

144228692
ORIWCYL10-3/8S: RNCC: 3 | RNVC: 9
ORIWCYL10S: RNCC: 5 | RNVC: 9

23 Mar 1988

4730-14-241-4866
Bague A Compression

142414866
N205-6RR: RNCC: 3 | RNVC: 2
501169: RNCC: 5 | RNVC: 2
B289101: RNCC: 5 | RNVC: 2
289101: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-442-2432
Special-Shaped Hose Clamp

144422432
NO PRIMARY REF14-442-2432: RNCC: 3 | RNVC: 2
704088: RNCC: 5 | RNVC: 9

3 Oct 1990

4730-14-530-9187
Pipe Flange

145309187
2534/1: RNCC: 3 | RNVC: 2

17 Jul 2002

4730-14-262-1583
Pipe Flange

142621583
7062DJ1F1M87-5-14CD2-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-465-2615
Quick Disconnect Coupling Half

144652615
0036-6513: RNCC: 3 | RNVC: 2
SAF0036-6513: RNCC: 5 | RNVC: 9

22 Sep 1993

4730-14-299-8507
Tube To Boss Straight Adapter

142998507
Q1G52-21-21-27CYLNU: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-417-3823
Tube-Hose Fitting Compression Sleeve

144173823
LN332-133DIAM350: RNCC: 3 | RNVC: 2

7 Jul 1987

4730-14-414-2319
Pipe Flange

144142319
U1240-11B2SPN150DN25Z2CND17-12T3: RNCC: 3 | RNVC: 2

27 Jan 1987

4730-14-408-5303
Bulkhead Hose Connector

144085303
9416101058: RNCC: 3 | RNVC: 2
9416-10-10-58: RNCC: 5 | RNVC: 2

2 Apr 1986

4730-14-278-8259
Tube Tee

142788259
Q1-5TR36X14X36NN: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-560-8620
Tube Coupling Assembly

145608620
C40032: RNCC: 3 | RNVC: 2
C40032: RNCC: 5 | RNVC: 2

27 May 2009

4730-14-042-4818
Equipe Raccord

140424818
74526: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-362-9050

4730-14-350-1351

4730-14-246-7666

4730-14-387-8622
Collet Pour Tube

143878622
NO PRIMARY REF14-387-8622: RNCC: 3 | RNVC: 2
0026-599DN65: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-574-8163
Quick Disconnect Coupling Assembly

145748163
3476-06-00: RNCC: 3 | RNVC: 2
5010525652: RNCC: 5 | RNVC: 2
20731977: RNCC: 5 | RNVC: 2

19 Feb 2013

4730-14-261-8503
Pipe Flange

142618503
RUHB7-22-4: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-474-9450
Adaptateur Male+Pur

144749450
P3R9040-022135: RNCC: 3 | RNVC: 9

14 Mar 1995

4730-14-261-6648
Tube To Boss Straight Adapter

142616648
29-9-043908-0: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-227-5475
Tamis Filtre A Sedi

142275475
552-000MA070DET2-3-4-17: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-263-6342
Tube Coupling

142636342
7062BA1RPET2-41-5A52-3: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-333-5085
Raccord Flexible

143335085
GSM166-004F12: RNCC: 3 | RNVC: 2
GSM166-04F12: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-412-6180
Tube To Boss Straight Adapter

144126180
GSM164-026F21: RNCC: 3 | RNVC: 2
MAT164-0353F21: RNCC: 3 | RNVC: 2

15 Oct 1986

4730-14-423-4077
Pipe Flange

144234077
UA50088006PN16-11ADN65: RNCC: 2 | RNVC: 2
4730JGDN065: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-526-3467
Swivel Retaining Pipe Flange

145263467
727-700-008: RNCC: 3 | RNVC: 2

24 Jul 2001

4730-14-415-7655
Fluid Passage Bolt

144157655
NO PRIMARY REF14-415-7655: RNCC: 3 | RNVC: 2
240480094: RNCC: 5 | RNVC: 9

18 May 1987

4730-14-367-6442
Fluid Passage Bolt

143676442
M17330-84: RNCC: 3 | RNVC: 2
018181: RNCC: 5 | RNVC: 2
M17330-84: RNCC: 5 | RNVC: 2

19 Jan 1981

4730-14-394-7183
Tube To Boss Straight Adapter

143947183
E64-35-3280-113PL98: RNCC: 3 | RNVC: 2

28 Aug 1984

4730-14-305-8205
Quick Disconnect Coupling Half

143058205
RBE06-2102/IC/6/OD: RNCC: 3 | RNVC: 2
U/TM/22/6/DS/TOUT INOX: RNCC: 5 | RNVC: 2
UTM22-6DST0UTIN0X: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-346-5445

4730-14-338-4019
Raccord Purgeur

143384019
86431ET86434: RNCC: 3 | RNVC: 9

6 Nov 1976

4730-14-431-9589
Quick Disconnect Coupling Half

144319589
RBE06-1806/IA/3: RNCC: 3 | RNVC: 2
91363649: RNCC: 5 | RNVC: 2

18 May 1989

4730-14-508-8782
Fluid Pressure Line Multiple Connector

145088782
RB6-10: RNCC: 3 | RNVC: 2
270020050: RNCC: 5 | RNVC: 2

5 Oct 1998

4730-14-305-9460
Tube To Boss Straight Adapter

143059460
UMCA10X8-13LL: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-411-8778
Sediment Strainer Element

144118778
435748: RNCC: 3 | RNVC: 9
435748/3: RNCC: 5 | RNVC: 9

10 Sep 1986

4730-14-481-0976
Bulkhead Hose Connector

144810976
726.D.06.06S.BR: RNCC: 3 | RNVC: 2
P426D0606SBR: RNCC: 3 | RNVC: 2
726 D 06 06S BR: RNCC: 5 | RNVC: 2
726D06 06SBR: RNCC: 5 | RNVC: 2
726D06-06SBR: RNCC: 5 | RNVC: 2
726D0606SBR: RNCC: 5 | RNVC: 2
74726D0606SBR: RNCC: 5 | RNVC: 2
74726D0606SBR: RNCC: 5 | RNVC: 2

18 Apr 1996

4730-14-305-6327
Tube To Boss Straight Adapter

143056327
Q1-52-8-8-13C0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-568-9635
Swivel Flange To Tube Elbow

145689635
CSET2220: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-273-5065
Tube Coupling

142735065
7062BA1RPET1-30UE10Z1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-242-7944
Tube Tee

142427944
NG410-25PL13: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-514-8960
Tube To Boss Straight Adapter

145148960
P4-1EDR12X10NU: RNCC: 3 | RNVC: 2

23 Jun 1999

4730-14-381-2872
Tube To Boss Straight Adapter

143812872
NO PRIMARY REF14-381-2872: RNCC: 3 | RNVC: 2
6127479-084: RNCC: 5 | RNVC: 2
6127479084: RNCC: 5 | RNVC: 2
GA8LP: RNCC: 5 | RNVC: 2
GA8LP: RNCC: 5 | RNVC: 9

25 Jan 1983

4730-14-440-4644
Tube To Boss Straight Adapter

144404644
20-011495: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-369-9831
Fluid Pressure Line Multiple Connector

143699831
AM5-1-10-1: RNCC: 3 | RNVC: 2
5411101: RNCC: 5 | RNVC: 9

18 May 1981

4730-14-424-5530
Quick Disconnect Coupling Half

144245530
RBE11-6813: RNCC: 3 | RNVC: 2

27 May 1988

4730-14-292-4776
Fluid Pressure Line Multiple Connector

142924776
F530-10-08: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-469-9733
Fluid Passage Bolt

144699733
MAT164-0100F3: RNCC: 3 | RNVC: 2

19 May 1994

4730-14-386-9637
Bulkhead Hose Connector

143869637
NO PRIMARY REF14-386-9637: RNCC: 3 | RNVC: 2
Q1-5SV10LEQUIPE: RNCC: 5 | RNVC: 9

24 Aug 1983

4730-14-489-1817
Fluid-Emulsion Spray Nozzle

144891817
70786-4,5MM: RNCC: 3 | RNVC: 2
4400-22-A-F54-4,5MM: RNCC: 5 | RNVC: 2

2 Jul 1997

4730-14-416-9039
Bulkhead Hose Connector

144169039
F521-09-11: RNCC: 3 | RNVC: 2

25 Jun 1987

4730-14-384-3876
Tube To Boss Straight Adapter

143843876
C3522-005F3: RNCC: 3 | RNVC: 2

4 May 1983

4730-14-283-1625

4730-14-242-8016

4730-14-262-1673

4730-14-560-9001
Pipe To Gas Fitting Straight Adapter

145609001
8501 L08 13: RNCC: 3 | RNVC: 2
11276: RNCC: 5 | RNVC: 2

28 May 2009

4730-14-344-6985
Fluid Pressure Line Multiple Connector

143446985
EA1M713-003: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-435-0870
Swivel Flange To Hose Connector

144350870
853-700-337-0: RNCC: 3 | RNVC: 2

18 Oct 1989

4730-14-422-5273
Pipe Expansion Joint

144225273
PN1-6ADBS-DN300: RNCC: 3 | RNVC: 2

8 Mar 1988

4730-14-457-8948
Tube Tee

144578948
4730JCING088,9X08-042,4X05: RNCC: 2 | RNVC: 2

26 Sep 1992

4730-14-422-8603
Fluid Pressure Line Multiple Connector

144228603
WH25SRA3C: RNCC: 3 | RNVC: 2
WH25SRA3C: RNCC: 3 | RNVC: 9
WHO25-PSR: RNCC: 5 | RNVC: 9

23 Mar 1988

4730-14-565-4250
Tube Reducer

145654250
MDS81P036: RNCC: 3 | RNVC: 2

17 Aug 2010

4730-14-505-3333
Tube Union

145053333
F88BFR8M12: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-498-9774
Self-Sealing Coupling Half

144989774
NO PRIMARY REF14-498-9774: RNCC: 3 | RNVC: 2
C-SAE1"1-20BT-D38: RNCC: 5 | RNVC: 9
CSAE1-1-20BTD38: RNCC: 5 | RNVC: 9
F300 0T 014 6567: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-447-5514
Quick Disconnect Coupling Half

144475514
3803175: RNCC: 3 | RNVC: 2
NC 003 413 0: RNCC: 3 | RNVC: 2
3803175: RNCC: 5 | RNVC: 2
NC 003 413 0 D: RNCC: 5 | RNVC: 2
NC003-413-0D: RNCC: 5 | RNVC: 2

29 May 1991

4730-14-441-6578
Bulkhead Hose Connector

144416578
ESV30-S: RNCC: 3 | RNVC: 2
ESV30SA3C: RNCC: 3 | RNVC: 2
ESV30SA3C: RNCC: 3 | RNVC: 9
226936: RNCC: 5 | RNVC: 2
SYB5239: RNCC: 5 | RNVC: 2
ESV30PS: RNCC: 5 | RNVC: 9

10 Sep 1990

4730-14-212-1473
Tube Coupling Assembly

142121473
0-3811SB16A: RNCC: 3 | RNVC: 2
0-3811SB16A: RNCC: 5 | RNVC: 9
85-691-3826: RNCC: 6 | RNVC: 9

5 Jul 1980

4730-14-350-2713
Tube To Boss Straight Adapter

143502713
9101137801: RNCC: 3 | RNVC: 2
A1-13-5-18X150: RNCC: 5 | RNVC: 9

14 Jun 1978

4730-14-304-3513
Flexible Tube Coupling Assembly

143043513
PE06.0.3: RNCC: 3 | RNVC: 2
PE06-03: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-261-8510
Pipe Flange

142618510
RUHB7-40-4: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-207-8786
Tube Tee

142078786
E29801B1EED: RNCC: 2 | RNVC: 2
AFY51-3-4X3-4X1-2: RNCC: 3 | RNVC: 2
E29801B1-3-4X3-4X1-2: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-335-4806
Tube To Boss Straight Adapter

143354806
123-10X100Z295: RNCC: 3 | RNVC: 2
12-7-7-10-100: RNCC: 5 | RNVC: 2
127-7-10X100MD: RNCC: 5 | RNVC: 2
85-686-6288: RNCC: 6 | RNVC: 9
85-686-6289: RNCC: 6 | RNVC: 9

30 Jun 1976

4730-14-313-7651

4730-14-327-8308

4730-14-234-9826

4730-14-257-2574
Fluid Passage Bolt

142572574
702A30-0114-20: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-453-8069
Sediment Strainer Element

144538069
647680-05: RNCC: 3 | RNVC: 2

12 Mar 1992

4730-14-211-9105
Tube To Boss Straight Adapter

142119105
52-8/12X100: RNCC: 3 | RNVC: 2
UML8X12-100N: RNCC: 3 | RNVC: 2
4L8-12X100: RNCC: 3 | RNVC: 2
ML8-12X1: RNCC: 3 | RNVC: 2
501057: RNCC: 5 | RNVC: 2
52-8-12X100: RNCC: 5 | RNVC: 2
DLT021808: RNCC: 5 | RNVC: 2
854: RNCC: 5 | RNVC: 2
DLT21808: RNCC: 5 | RNVC: 9
24214090: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-417-5166
Tube To Boss Straight Adapter

144175166
304-687-001-0: RNCC: 3 | RNVC: 2

8 Jul 1987

4730-14-308-4706
Tube Fitting Brazing Ferrule

143084706
GSM163-011REP10-2-20F8: RNCC: 3 | RNVC: 2
GSM163-11AREP10-2-20: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-497-7506
Fluid Pressure Line Multiple Connector

144977506
00 119 714 06: RNCC: 3 | RNVC: 2
10029-714-06: RNCC: 5 | RNVC: 9
10029-714-6: RNCC: 5 | RNVC: 9

15 Oct 1997

4730-14-406-9443
Tube Tee

144069443
853-700-162-0: RNCC: 3 | RNVC: 2

22 Jan 1986

4730-14-206-4056
Tube To Boss Straight Adapter

142064056
52-14-18X150: RNCC: 3 | RNVC: 2
4L14-18X150: RNCC: 3 | RNVC: 2
ML14-18X1-5: RNCC: 3 | RNVC: 2
UML14X18-150N: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-426-7798
Tube Tee

144267798
4730HEING088,9X5-42,4X2,6: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-216-8247
Tube To Boss Straight Adapter

142168247
9910089: RNCC: 3 | RNVC: 2
2124023: RNCC: 5 | RNVC: 2
0943158009: RNCC: 5 | RNVC: 2
2-12-40-23: RNCC: 5 | RNVC: 9
2816-8-10ACIERCD: RNCC: 5 | RNVC: 9
9-91-00-89: RNCC: 5 | RNVC: 9
9910089: RNCC: 5 | RNVC: 9
2816-8-10: RNCC: 5 | RNVC: 9
RAN2816-8-10: RNCC: 5 | RNVC: 9
0943158009: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-505-3419
Tube To Gas Fitting Straight Adapter

145053419
RI1X3/8A3CX: RNCC: 3 | RNVC: 2
RI1X3/8A3CX: RNCC: 3 | RNVC: 9
RI1X3-8: RNCC: 5 | RNVC: 9
RI 1X3/8: RNCC: 5 | RNVC: 9

18 Mar 1998

4730-14-228-6811
Tube Tee

142286811
GSM1297FE3-2TABLEAU2: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-299-8565
Tube To Boss Straight Adapter

142998565
Q1-5204JC36-40X49CYL: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-325-8968
Tube Coupling

143258968
34-12X17-12: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-222-6523
Tube Fitting Brazing Ferrule

142226523
GSM1297F1AF1BTABLEAU1D1-10I7: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-338-1508
Quick Disconnect Coupling Half

143381508
NO PRIMARY REF14-338-1508: RNCC: 3 | RNVC: 2
FIG20DN40SANSFILETAGE: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-398-7065
Pipe Flange

143987065
J05085-04-0600P026: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-478-3109
Tube Tee

144783109
780217001: RNCC: 3 | RNVC: 2
46RA6/10+PPA: RNCC: 5 | RNVC: 2

25 Oct 1995

4730-14-376-6119
Tube To Boss Straight Adapter

143766119
1204-12-18X150: RNCC: 3 | RNVC: 2
5A12-18X150: RNCC: 3 | RNVC: 2
0RSA12X18-150N: RNCC: 3 | RNVC: 2
202369900400: RNCC: 5 | RNVC: 2
99591278: RNCC: 5 | RNVC: 2
205104190: RNCC: 5 | RNVC: 2
AA12X18-150N: RNCC: 5 | RNVC: 2
LL9159-12-78S: RNCC: 5 | RNVC: 2

28 Apr 1982

4730-14-237-2211
Bouchon Etanche Pou

142372211
11-64-134: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-332-8387
Tube Tee

143328387
17-14NNTF104JCU14: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-448-8807
Quick Disconnect Coupling Half

144488807
RBE08-1151/OD/IC/JV/FB: RNCC: 3 | RNVC: 2

24 Jul 1991

4730-14-446-5778
Pipeline Flexible Spacer

144465778
DILATOFLEX K-EPC-DN65PN16: RNCC: 3 | RNVC: 2

27 Mar 1991

4730-14-281-3129
Ecrou-Raccord Equip

142813129
156312: RNCC: 3 | RNVC: 2
650-485-045-0: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-289-9842
Pipe Flange

142899842
D4-4: RNCC: 3 | RNVC: 2
CA3-4M42REP3: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-261-8498
Pipe Flange

142618498
RUHB7-12-8: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-572-9564
Tube Tee

145729564
EVL06LCF: RNCC: 3 | RNVC: 2
427370: RNCC: 5 | RNVC: 2

30 Aug 2012

4730-14-256-7133

4730-14-340-7682

4730-14-242-7955

4730-14-373-8376
Quick Disconnect Coupling Half

143738376
RBA06-1809/L/VI: RNCC: 3 | RNVC: 2
RBA06-1809LVI: RNCC: 5 | RNVC: 2

13 Nov 1981

4730-14-360-3222

4730-14-240-1045
Bouchon Filete

142401045
704560: RNCC: 3 | RNVC: 9
062076014: RNCC: 5 | RNVC: 9
76014: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-311-2588

4730-14-228-6873

4730-14-559-4150
Quick Disconnect Coupling Half

145594150
5023: RNCC: 3 | RNVC: 2

8 Jan 2009

4730-14-278-8149

4730-14-321-5984

4730-14-310-3064
Tube To Boss Straight Adapter

143103064
374N: RNCC: 3 | RNVC: 2
101-14-78: RNCC: 3 | RNVC: 2
25274: RNCC: 3 | RNVC: 9
R95405D14D: RNCC: 4 | RNVC: 1

1 Jan 1974

4730-14-423-5635
Tube Tee

144235635
F530-10830: RNCC: 3 | RNVC: 2

21 Apr 1988

4730-14-040-4862
Jeu Demi-Manchons

140404862
L40.06: RNCC: 3 | RNVC: 2
L40-0-6: RNCC: 5 | RNVC: 2
L40-06: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-542-0557
Tube To Boss Straight Adapter

145420557
25283604-081: RNCC: 3 | RNVC: 2
502103002011A: RNCC: 3 | RNVC: 9
2528 3604-081: RNCC: 5 | RNVC: 2

2 Jul 2004

4730-14-423-4758
Pipe Flange

144234758
UA50088006PN100-11LSPDN150: RNCC: 2 | RNVC: 2
4730HCPN100DN15011LSP: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-530-0293
Quick Disconnect Coupling Half

145300293
RBE 11.7813/IC/JE/OD: RNCC: 3 | RNVC: 2

30 Apr 2002

4730-14-240-7120
Manchette Speciale

142407120
NG421-00-13PL2: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-275-0725
Bicone Dobturation

142750725
C2601: RNCC: 3 | RNVC: 2
88-205910: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-333-5970
Tube To Boss Straight Adapter

143335970
31750613: RNCC: 3 | RNVC: 2
222-9146: RNCC: 5 | RNVC: 2
B12302704: RNCC: 5 | RNVC: 2
437188M: RNCC: 5 | RNVC: 2
317506-13: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-221-2179
Raccord A Joint Cou

142212179
GSM1297FE5-8TABLEAU2: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-563-6181
Tube Outlet

145636181
ABS1365-28-32B2: RNCC: 1 | RNVC: 2
D261-28-32B: RNCC: 3 | RNVC: 2
ABS1365-28-32B2: RNCC: 5 | RNVC: 9

1 Mar 2010

4730-14-550-4126
Threaded Tube Fitting Plug

145504126
949402: RNCC: 3 | RNVC: 2
949402-2: RNCC: 5 | RNVC: 2

19 Jun 2006

4730-14-383-2670
Tube To Boss Straight Adapter

143832670
4A10 1-8BGS: RNCC: 3 | RNVC: 2
204 1 02152: RNCC: 5 | RNVC: 2
4A10/1/8BGS: RNCC: 5 | RNVC: 2

21 Nov 2001

4730-14-423-4634
Pipe Flange

144234634
UA50088006PN420-11D1SDN25: RNCC: 2 | RNVC: 2
4730HCPN420DN02511D1S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-355-5697

4730-14-314-2370
Tube Tee

143142370
A10-52-533-07-0: RNCC: 3 | RNVC: 2
A10-52-533-07-0: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-365-6685
Tube To Boss Straight Adapter

143656685
42-8-22X150NU: RNCC: 3 | RNVC: 2
5000497161: RNCC: 5 | RNVC: 2
5000497161: RNCC: 5 | RNVC: 9

8 Oct 1980

4730-14-377-9061
Reducing Tube Coupling Nut

143779061
2935-0062: RNCC: 3 | RNVC: 2
SAF2935-0062: RNCC: 5 | RNVC: 9

10 Jun 1982

4730-14-495-6416
Union

144956416
U51375-05: RNCC: 3 | RNVC: 2
F300 0T 019 5696: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-449-4047
Straight Tubing Connector

144494047
1980-900-13: RNCC: 3 | RNVC: 2
85-694-6114: RNCC: 6 | RNVC: 9

7 Aug 1991

4730-14-423-4096
Pipe Flange

144234096
UA50088006PN16-11ADN400: RNCC: 2 | RNVC: 2
4730JGDN400: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-373-7282
Quick Disconnect Coupling Half

143737282
RBE11-2103ICJVFB: RNCC: 3 | RNVC: 2

13 Nov 1981

4730-14-335-9343
Tube Tee

143359343
Q0-1R10X8X12L: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-418-6520
Pipe Flange

144186520
E29203-01B-PN16DN20BF42N: RNCC: 2 | RNVC: 2
MEC10334: RNCC: 3 | RNVC: 2
4730CJ-DN20: RNCC: 5 | RNVC: 2

9 Sep 1987

4730-14-431-9488
Pipe Flange

144319488
UA50088012-LSPN-DE48: RNCC: 3 | RNVC: 2

17 May 1989

4730-14-425-1831
Pipe Flange

144251831
BN324-583F3DN32: RNCC: 2 | RNVC: 2

24 Jun 1988

4730-14-361-5242
Tube Tee

143615242
Q1-5TR10X12X10NU: RNCC: 3 | RNVC: 2

24 Jan 1980

4730-14-382-6698
Pipe Flange

143826698
365A65-3234-00: RNCC: 3 | RNVC: 2

7 Mar 1996

4730-14-260-9217

4730-14-360-9077

4730-14-427-8939
Tube To Boss Straight Adapter

144278939
GE25SR71X: RNCC: 3 | RNVC: 2
GE25SR71X: RNCC: 3 | RNVC: 9
XGE25-PSR/1.4571: RNCC: 5 | RNVC: 9

19 Nov 1988

4730-14-437-3895
Quick Disconnect Coupling Half

144373895
RBE06-6813IC: RNCC: 3 | RNVC: 2

31 Jan 1990

4730-14-562-5589
Pipeline Flexible Spacer

145625589
0429074: RNCC: 3 | RNVC: 2
A1/200/KR320-WG/E/AV: RNCC: 3 | RNVC: 2

3 Nov 2009

4730-14-212-3131
Tube Tee

142123131
A23051-4A: RNCC: 3 | RNVC: 2
A23051-4A: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-489-7816
Fluid-Emulsion Spray Nozzle

144897816
1/4GGA-SS6.5: RNCC: 3 | RNVC: 2

13 Aug 1997

4730-14-452-1983
Tube Union

144521983
45560034: RNCC: 3 | RNVC: 9

6 Jan 1992

4730-14-568-4852
Tube Nipple

145684852
P769501: RNCC: 3 | RNVC: 2
4KK995: RNCC: 5 | RNVC: 2

7 Jun 2011

4730-14-316-0007
Embout Torique Equ

143160007
0264758690: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-217-8289
Raccord Intermediai

142178289
3160S73-69-463: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-361-7122
Tube Tee

143617122
Z00372-36: RNCC: 3 | RNVC: 2
F0532S4710X0002-9787: RNCC: 3 | RNVC: 2
S4710X0002-9787: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-569-5565
Pipe To Gas Fitting Straight Adapter

145695565
T180715101: RNCC: 3 | RNVC: 2
LK0000005727-REP31: RNCC: 5 | RNVC: 2
09Y2000R01DZ001-REP31: RNCC: 5 | RNVC: 2
T18-0715-101: RNCC: 5 | RNVC: 2

27 Sep 2011

4730-14-398-5882
Tube Tee

143985882
GSM164-055F2: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-430-4358
Tube Tee

144304358
BN329-512TEEG141,3-3,4: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-300-4979
Hose Coupling Assembly

143004979
9945305: RNCC: 3 | RNVC: 2
9945305A: RNCC: 3 | RNVC: 2
9-94-53-05: RNCC: 5 | RNVC: 9
9-94-53-05A: RNCC: 5 | RNVC: 9
TAH1062-6: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-319-8010
Fluid Pressure Line Multiple Connector

143198010
121E52-301-00-0: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-304-2962
Fluid Pressure Line Multiple Connector

143042962
121E52-216-00-0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-264-9194
Tube Union

142649194
G1204-27-21X27: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-370-3858
Tube Fitting Brazing Ferrule

143703858
BN320-513CREP7: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-222-7327
Tube Tee

142227327
GSM1297FE3-35TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-235-1184
Tube Tee

142351184
57-10: RNCC: 3 | RNVC: 2
TL10N: RNCC: 3 | RNVC: 2
10L10: RNCC: 3 | RNVC: 2
TL10: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-333-0749
Tube To Boss Straight Adapter

143330749
NO PRIMARY REF14-333-0749: RNCC: 3 | RNVC: 2
201881: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-389-5829
Tube To Boss Straight Adapter

143895829
ST159-2M881P17: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-457-8002
Pipe Flange

144578002
4730JADN065-11B2S: RNCC: 2 | RNVC: 2

24 Sep 1992

4730-14-386-9640
Tube Tee

143869640
NO PRIMARY REF14-386-9640: RNCC: 3 | RNVC: 2
Q1-5T30SEQUIPE: RNCC: 5 | RNVC: 9

24 Aug 1983

4730-14-559-1443
Tube Elbow

145591443
EA1M702-21-910: RNCC: 3 | RNVC: 2

10 Dec 2008

4730-14-324-1332
Bulkhead Hose Connector

143241332
ESQ1-5DDR1: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-324-1270
Tube To Boss Straight Adapter

143241270
ESQ1-52-76TF: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-334-2550
Tube Tee

143342550
GSM163-017F53: RNCC: 3 | RNVC: 2
GSM163-17F53: RNCC: 5 | RNVC: 2

23 Apr 1976