What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 148 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 148 of 185

4730-14-403-8764
Tube To Boss Straight Adapter

144038764
3465811: RNCC: 3 | RNVC: 2
5721040808: RNCC: 5 | RNVC: 2

28 Aug 1985

4730-14-334-2677
Bloc Commande

143342677
J00679-15-0000P024: RNCC: 3 | RNVC: 2
A0174-310: RNCC: 3 | RNVC: 2

23 Apr 1976

4730-14-362-4641
Fluid Pressure Line Multiple Connector

143624641
248R0-1-2: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-334-2037

4730-14-220-5970

4730-14-386-6339

4730-14-496-3281
Graisseur

144963281
125963: RNCC: 3 | RNVC: 2
F300 0T 021 3979: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-368-9559
Tube Coupling

143689559
16130705: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-442-5058
Tube Coupling

144425058
20710931: RNCC: 3 | RNVC: 2

17 Oct 1990

4730-14-523-7582
Fluid Flow Restrictor

145237582
A25474A: RNCC: 3 | RNVC: 2
A25474: RNCC: 5 | RNVC: 2

31 Jan 2001

4730-14-040-0055
Fluid Pressure Line Multiple Connector

140400055
0000301680: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-472-4176
Hose To Boss Straight Adapter

144724176
27656190B: RNCC: 3 | RNVC: 2

20 Oct 1994

4730-14-220-7197
Tube Coupling Inverted Nut

142207197
R104: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-333-5268
Fluid Pressure Line Multiple Connector

143335268
109-20-21-27NU: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-442-6653
Sediment Strainer Element

144426653
413057: RNCC: 3 | RNVC: 9

24 Oct 1990

4730-14-355-5648
Tube Reducer

143555648
G12-27-33: RNCC: 3 | RNVC: 2

19 Mar 1979

4730-14-296-0227
Douille Filetee Pou

142960227
ECEMAT7529B: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-508-9021
Tube Union

145089021
K102875A: RNCC: 3 | RNVC: 2

7 Oct 1998

4730-14-264-4928

4730-14-216-1161

4730-14-567-4903
Hose Clamp

145674903
994564: RNCC: 3 | RNVC: 2

18 Mar 2011

4730-14-236-5994

4730-14-508-3561
Tube Coupling

145083561
004545094: RNCC: 3 | RNVC: 9

9 Sep 1998

4730-14-370-6380
Pipe Expansion Joint

143706380
25442807800: RNCC: 3 | RNVC: 2
254428078: RNCC: 5 | RNVC: 9

18 May 1981

4730-14-229-8272

4730-14-254-8105

4730-14-516-0542
Fluid Flow Restrictor

145160542
SIFLS1R001200F4AREP10B: RNCC: 3 | RNVC: 2

8 Sep 1999

4730-14-540-6396
Anchor And Reinforcement Pipe Clamp

145406396
ND028148: RNCC: 3 | RNVC: 2
4848ZG8613180405: RNCC: 6 | RNVC: 9

14 Apr 2004

4730-14-463-3924
Adapter And Flange Assembly

144633924
123060330: RNCC: 3 | RNVC: 9

9 Jun 1993

4730-14-522-9742
Tube Tee

145229742
0319707100: RNCC: 3 | RNVC: 2

13 Dec 2000

4730-14-434-7133
Adaptateur Bride

144347133
BN329515D2DN100AC: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-560-5989
Tube Tee

145605989
7420961146: RNCC: 1 | RNVC: 2
93408600: RNCC: 3 | RNVC: 2
20961146: RNCC: 5 | RNVC: 2

4 May 2009

4730-14-499-3482
Tube To Boss Straight Adapter

144993482
5000287964: RNCC: 3 | RNVC: 2
63AX3705: RNCC: 5 | RNVC: 2
F300 0T 021 7083: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-492-2477
Tube To Boss Straight Adapter

144922477
0003435039: RNCC: 3 | RNVC: 2
F300 0T 007 2294: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-276-0310
Tube-Hose Fitting Compression Sleeve

142760310
11233520Y: RNCC: 3 | RNVC: 2
23352: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-504-4723
Lubrication Fitting

145044723
TR95310: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-270-4131
Pipe Flange

142704131
P30036B: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-496-5101
Tube To Boss Straight Adapter

144965101
550062: RNCC: 3 | RNVC: 2
F300 0T 021 6150: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-362-8273

4730-14-365-7466
Tube Coupling

143657466
3020600: RNCC: 3 | RNVC: 2
44185010000: RNCC: 5 | RNVC: 2
613020600: RNCC: 5 | RNVC: 2
809-66-20: RNCC: 5 | RNVC: 2
302-06-00: RNCC: 5 | RNVC: 2
HOL3020600: RNCC: 5 | RNVC: 9

8 Oct 1980

4730-14-423-4310
Pipe Flange

144234310
UA50088006PN150-11D1DN20: RNCC: 2 | RNVC: 2
4730HCPN150DN02011D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-378-2404
Raccord Equipe

143782404
MAT205-02-00-1: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-513-8330
Quick Disconnect Coupling Half

145138330
1120-558: RNCC: 3 | RNVC: 2
1120558: RNCC: 5 | RNVC: 9

14 Apr 1999

4730-14-387-1704
Self-Sealing Coupling Half

143871704
SF07508AU2086: RNCC: 3 | RNVC: 2
S0F75-0-1-2-2086: RNCC: 5 | RNVC: 2
S0F75-01-2-2086: RNCC: 5 | RNVC: 2
S0F750 1/2-2086: RNCC: 5 | RNVC: 2
85-693-8338: RNCC: 6 | RNVC: 9

24 Aug 1983

4730-14-550-4087
Tube To Boss Straight Adapter

145504087
4DL12/18X1.5A: RNCC: 3 | RNVC: 2
4DL12 18X1.5A: RNCC: 5 | RNVC: 2
5010616345: RNCC: 5 | RNVC: 2

19 Jun 2006

4730-14-347-2218
Raccord Adaptable

143472218
GSM167-009F7: RNCC: 3 | RNVC: 2
GSM167-09F7: RNCC: 5 | RNVC: 2

19 Jan 1978

4730-14-474-7021
Quick Disconnect Coupling Half

144747021
N00225695: RNCC: 3 | RNVC: 2
RBE08-1152/IC/FB/JE/OD/SP: RNCC: 5 | RNVC: 2

27 Feb 1995

4730-14-407-1753
Tube To Gas Fitting Straight Adapter

144071753
UFAG13X12-17NNU: RNCC: 3 | RNVC: 2
LW154NP1306NNU: RNCC: 5 | RNVC: 2
82277: RNCC: 5 | RNVC: 2

12 Feb 1986

4730-14-417-6671
Tube Coupling

144176671
GM10009-32: RNCC: 3 | RNVC: 2
99637650009: RNCC: 5 | RNVC: 2
GM10009-32: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-472-7817
Quick Disconnect Coupling Half

144727817
RBE11-8650IA-HP-JV: RNCC: 3 | RNVC: 2
RBE11 8650/IA/HP/JV: RNCC: 5 | RNVC: 2
S009-248-94: RNCC: 5 | RNVC: 2

9 Nov 1994

4730-14-328-8241
Tube To Boss Straight Adapter

143288241
485-002-625-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-234-9383
Col De Cygne Pour B

142349383
7062RPF2-2-65CA: RNCC: 3 | RNVC: 9

1 Jan 1967

4730-14-457-8958
Tube Tee

144578958
4730JCING323,9X17,5-168,3X11: RNCC: 2 | RNVC: 2

26 Sep 1992

4730-14-312-7578
Tube To Boss Straight Adapter

143127578
GSM164-040F9: RNCC: 3 | RNVC: 2
411MA792REP2: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-277-9828
Bouchon De Reservoi

142779828
106183: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-485-0024
Tube To Boss Straight Adapter

144850024
5005030434: RNCC: 3 | RNVC: 2
F300 0T 017 0341: RNCC: 6 | RNVC: 9

19 Dec 1996

4730-14-230-7142
Pipe Flange

142307142
GSM1947REP17FEMELLE: RNCC: 3 | RNVC: 2
GSM1947DET17FEMELLE: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-345-4095
Quick Disconnect Coupling Half

143454095
434D04: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-367-0385

4730-14-316-8099

4730-14-237-7610

4730-14-352-5479
Fluid Pressure Line Multiple Connector

143525479
A11A221278020: RNCC: 3 | RNVC: 2

16 Oct 1978

4730-14-306-4279
Pipe Flange

143064279
8811311203: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-505-6427
Fluid Pressure Line Multiple Connector

145056427
E25001278000: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-506-9902
Tube Coupling

145069902
05363: RNCC: 3 | RNVC: 2
5363: RNCC: 3 | RNVC: 2

2 Jun 1998

4730-14-217-5386

4730-14-521-1188
Quick Disconnect Coupling Half

145211188
NC 401 404 0: RNCC: 3 | RNVC: 2
NC4014040: RNCC: 5 | RNVC: 2

11 Jul 2000

4730-14-427-3282
Tube Tee

144273282
4730HDING088,9X3,2-76,1X2,9: RNCC: 2 | RNVC: 2

13 Oct 1988

4730-14-415-1990
Tube Tee

144151990
4730HEEG033,7X4,5: RNCC: 2 | RNVC: 2
U1238F12DE33,7X4,5: RNCC: 5 | RNVC: 2

17 Apr 1987

4730-14-397-1595
Bulkhead Hose Connector

143971595
4227-6: RNCC: 3 | RNVC: 2

1 Dec 1984

4730-14-378-4522
Tube To Boss Straight Adapter

143784522
A81778-2: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-377-5032
Sediment Strainer Element

143775032
2-185-800: RNCC: 3 | RNVC: 2

17 May 1982

4730-14-224-4001

4730-14-433-8189

4730-14-300-7078

4730-14-413-6860
Pipe Flange

144136860
00-721-1006: RNCC: 3 | RNVC: 2
8098427: RNCC: 5 | RNVC: 2
007211006: RNCC: 5 | RNVC: 2
536133: RNCC: 5 | RNVC: 2

15 Jan 1987

4730-14-397-0238
Quick Disconnect Coupling Half

143970238
RBE08-1102/OD/IC: RNCC: 3 | RNVC: 2
RBE08-1102-0DIC: RNCC: 5 | RNVC: 2

1 Dec 1984

4730-14-454-4821
Self-Sealing Coupling Assembly

144544821
SKK12-M10X1-25-VB: RNCC: 3 | RNVC: 2
SMK 12-M10X1-25-VB: RNCC: 5 | RNVC: 2
SMK12-M10X1-25-VB: RNCC: 5 | RNVC: 2
SMK12M10X125VB: RNCC: 5 | RNVC: 2
SKK12M10X125VB: RNCC: 5 | RNVC: 2

2 Apr 1992

4730-14-294-9292
Tube To Boss Straight Adapter

142949292
01010660: RNCC: 3 | RNVC: 2
101-06-60: RNCC: 3 | RNVC: 2
01241977: RNCC: 5 | RNVC: 2
1010660: RNCC: 5 | RNVC: 2
3952: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-500-6449
Tube Tee

145006449
XT16-SA3C: RNCC: 3 | RNVC: 2
XT16SA3C: RNCC: 3 | RNVC: 2
F300 0T 024 6635: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-333-8740

4730-14-237-5332

4730-14-207-2713

4730-14-570-9355
Quick Disconnect Coupling Assembly

145709355
10 115 1222 + 10 115 6202: RNCC: 3 | RNVC: 2

6 Feb 2012

4730-14-227-3004
Bouchon

142273004
2-00219: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-573-8554
Tube Union

145738554
G4BMB10-1/4: RNCC: 3 | RNVC: 2

15 Nov 2012

4730-14-260-4531
Collier Flexible

142604531
B2140950-1: RNCC: 3 | RNVC: 2
2140950-1: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-557-1748
Union Nut

145571748
1903D940: RNCC: 3 | RNVC: 2
RE2D: RNCC: 5 | RNVC: 2

23 May 2008

4730-14-545-8826
Tube Union

145458826
956969-0: RNCC: 3 | RNVC: 2

24 May 2005

4730-14-561-6070
Tube To Boss Straight Adapter

145616070
8F642EDMLS: RNCC: 3 | RNVC: 2
002569: RNCC: 5 | RNVC: 2
20 250 100 1690: RNCC: 5 | RNVC: 2
4730PL0497639: RNCC: 6 | RNVC: 9

4 Aug 2009

4730-14-560-8968
Fluid Pressure Line Multiple Connector

145608968
8028S1421: RNCC: 3 | RNVC: 2

28 May 2009

4730-14-366-5853

4730-14-365-9540

4730-14-235-6394

4730-14-516-1930
Tube Tee

145161930
7930014167: RNCC: 3 | RNVC: 2
0052058: RNCC: 3 | RNVC: 2

15 Sep 1999

4730-14-543-8729
Tube To Boss Straight Adapter

145438729
560503485: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-490-3588
Tube Fitting Brazing Ferrule

144903588
915003013206: RNCC: 3 | RNVC: 2

24 Sep 1997

4730-14-543-8074
Tube To Boss Straight Adapter

145438074
560502015: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-413-4895
Sediment Strainer Body

144134895
03110100000NW0A: RNCC: 3 | RNVC: 2

17 Dec 1986

4730-14-457-9030
Tube Coupling

144579030
20910036: RNCC: 3 | RNVC: 2
308173: RNCC: 5 | RNVC: 2

29 Sep 1992

4730-14-278-0919

4730-14-227-7958

4730-14-357-4138

4730-14-273-5055
Tube To Boss Straight Adapter

142735055
7062BA1RCET1-20UE10Z1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-381-2994
Tube To Boss Straight Adapter

143812994
846431: RNCC: 3 | RNVC: 2
E26375-29: RNCC: 5 | RNVC: 2
895710: RNCC: 5 | RNVC: 9
GE15LMED: RNCC: 5 | RNVC: 9

25 Jan 1983

4730-14-387-0847
Tube To Boss Straight Adapter

143870847
31751417: RNCC: 3 | RNVC: 2
278-7175: RNCC: 5 | RNVC: 2

24 Aug 1983

4730-14-339-9865
Bulkhead Hose Connector

143399865
GSM425-024F47: RNCC: 3 | RNVC: 2
A0009-031F7: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-429-5498
Quick Disconnect Wye

144295498
RCS06-8101: RNCC: 3 | RNVC: 2

30 Jan 1989

4730-14-452-1515
Tube To Boss Straight Adapter

144521515
A580-002: RNCC: 3 | RNVC: 2

18 Dec 1991

4730-14-456-0605
Quick Disconnect Coupling Half

144560605
DCN316-8M: RNCC: 3 | RNVC: 2
DCN316-8M: RNCC: 3 | RNVC: 9
RAR1533: RNCC: 5 | RNVC: 2

17 Jun 1992

4730-14-491-0680
Tube To Boss Straight Adapter

144910680
NO PRIMARY REF14-491-0680: RNCC: 3 | RNVC: 2
1217-146: RNCC: 5 | RNVC: 9
F300 0T 001 3500: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-229-1914
Quick Disconnect Coupling Assembly

142291914
SDS0-50BAG: RNCC: 3 | RNVC: 2
SDS02-48-50Z: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-300-4936
Fluid Passage Bolt

143004936
A64952: RNCC: 3 | RNVC: 2
85-656-8600: RNCC: 6 | RNVC: 9

1 Jan 1973

4730-14-389-7941
Pipe Flange

143897941
MN6363-1F4-5DN125: RNCC: 2 | RNVC: 2

20 Dec 1983

4730-14-307-5038
Tube Tee

143075038
E4M712-13-01: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-366-4219
Fluid Pressure Line Multiple Connector

143664219
451-43-00-01: RNCC: 3 | RNVC: 2

20 Nov 1980

4730-14-316-8002
Fluid Pressure Line Multiple Connector

143168002
536-411-024DET11: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-298-0295
Pipe Flange

142980295
RUAN7520-30-14: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-224-3903
Tube Fitting Brazing Ferrule

142243903
GSM163-002DETNL: RNCC: 3 | RNVC: 2
GSM163-02DETNL: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-226-3855
Raccord Droit

142263855
R4A722-006: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-558-7973
Hose Elbow

145587973
U-EGM-CAB-686-A: RNCC: 3 | RNVC: 2

6 Nov 2008

4730-14-561-3154
Union Tailpiece

145613154
FP3108-1: RNCC: 3 | RNVC: 2

3 Jul 2009

4730-14-263-9620
Fluid Pressure Line Multiple Connector

142639620
330A52-9818-00: RNCC: 3 | RNVC: 2
330A52-9818-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-452-1857
Quick Disconnect Coupling Half

144521857
RCS08-1151: RNCC: 3 | RNVC: 2
RCS8-1151: RNCC: 5 | RNVC: 2

23 Dec 1991

4730-14-339-9867
Bulkhead Hose Connector

143399867
GSM425-024F11: RNCC: 3 | RNVC: 2
A0009-031F11: RNCC: 5 | RNVC: 2
GSM425-24F11: RNCC: 5 | RNVC: 2
A0009-024F6: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-403-0357
Tube Tee

144030357
S3BPLB8X1-1-4: RNCC: 3 | RNVC: 2
S3BPLB8X1-1-4: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-032-3868
Tube Union

140323868
2398REP2: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-542-1704
Lubrication Fitting

145421704
571578608: RNCC: 3 | RNVC: 2
571578608: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-525-7919
Tube To Boss Straight Adapter

145257919
F145334: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-353-5734
Quick Disconnect Coupling Assembly

143535734
72276500: RNCC: 3 | RNVC: 2

16 Jan 1979

4730-14-252-2616
Tube Coupling

142522616
ES1UMF3: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-295-3653
Fluid Pressure Line Multiple Connector

142953653
Q2R3008: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-524-8054
Quick Disconnect Coupling Half

145248054
9D21 01 06P483: RNCC: 3 | RNVC: 2
9D21 01 06P483: RNCC: 5 | RNVC: 2

18 Apr 2001

4730-14-384-4594
Tube Tee

143844594
8404100066: RNCC: 3 | RNVC: 2

4 May 1983

4730-14-460-2001
Tube Union

144602001
10000 E3 0280: RNCC: 3 | RNVC: 2

15 Jan 1993

4730-14-355-5615

4730-14-452-7509
Tube Tee

144527509
6214032: RNCC: 3 | RNVC: 2
91630577: RNCC: 5 | RNVC: 2
LW300GP10N: RNCC: 5 | RNVC: 2

15 Jan 1992

4730-14-424-7066
Tube To Hose Straight Adapter

144247066
18221010: RNCC: 3 | RNVC: 2

7 Jun 1988

4730-14-536-0686
Straight Tubing Connector

145360686
31800002201: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-363-7462
Fluid Pressure Line Multiple Connector

143637462
A11B221278010: RNCC: 3 | RNVC: 2

6 Jul 1980

4730-14-521-4220
Tube To Hose Straight Adapter

145214220
31140610: RNCC: 3 | RNVC: 2

26 Jul 2000

4730-14-374-1169
Bulkhead Hose Connector

143741169
WTXWLNS6: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-462-9316
Pipe Flange

144629316
142032: RNCC: 3 | RNVC: 2

7 May 1993

4730-14-540-8465
Quick-Disconnect Nipple

145408465
03601940: RNCC: 3 | RNVC: 2

23 Apr 2004

4730-14-500-9617
Quick Disconnect Coupling Half

145009617
GA00667 67: RNCC: 3 | RNVC: 2
066806: RNCC: 5 | RNVC: 2
F300 0T 024 9829: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-535-8288
Pipe Flange

145358288
37402357: RNCC: 3 | RNVC: 2

25 Jun 2003

4730-14-325-6763
Bulkhead Hose Connector

143256763
0000362480: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-536-2490
Tube Coupling

145362490
W006540237: RNCC: 3 | RNVC: 2

22 Jul 2003

4730-14-522-0484
Tube To Boss Straight Adapter

145220484
255060002: RNCC: 3 | RNVC: 9

2 Oct 2000

4730-14-521-4275
Quick Disconnect Coupling Half

145214275
GL 00656 78: RNCC: 3 | RNVC: 2
GL0065678: RNCC: 5 | RNVC: 2

26 Jul 2000

4730-14-457-8884
Quick-Disconnect Nipple

144578884
1802730: RNCC: 3 | RNVC: 2

26 Sep 1992

4730-14-537-0442
Special-Shaped Hose Clamp

145370442
CFCD1 20 60 W1: RNCC: 3 | RNVC: 2

24 Sep 2003

4730-14-345-0518
Fluid Passage Bolt

143450518
113461: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-394-1543
Pipe Flange

143941543
E29282DN150: RNCC: 2 | RNVC: 2

23 Jun 1984

4730-14-340-4386
Quick Disconnect Coupling Assembly

143404386
1700-805: RNCC: 3 | RNVC: 2

14 Feb 1977

4730-14-360-8296
Fluid Pressure Line Multiple Connector

143608296
001840593: RNCC: 3 | RNVC: 2
1840593: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-320-1558
Fluid Passage Bolt

143201558
108-14-24: RNCC: 3 | RNVC: 2
108-14-24: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-307-3918
Tube To Boss Straight Adapter

143073918
DLT045247: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-331-1225
Tube To Boss Straight Adapter

143311225
3010180: RNCC: 3 | RNVC: 2
3053032: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-420-0881
Tube Tee

144200881
101257: RNCC: 3 | RNVC: 2

18 Nov 1987

4730-14-293-9800
Bouchon Symetrique

142939800
NO PRIMARY REF14-293-9800: RNCC: 3 | RNVC: 2
4097-30-35: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-425-7244
Quick Disconnect Coupling Half

144257244
69302004: RNCC: 3 | RNVC: 2
NO PRIMARY REF14-425-7244: RNCC: 3 | RNVC: 2
69302004: RNCC: 5 | RNVC: 9

21 Jul 1988

4730-14-452-3322
Bulkhead Hose Connector

144523322
F0532S4710X0002-5117: RNCC: 3 | RNVC: 2
LW101-DW5278N: RNCC: 3 | RNVC: 2
S4710X0002-5117: RNCC: 5 | RNVC: 2

8 Jan 1992

4730-14-211-8540
Bouchon Filete A Ti

142118540
30272: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-426-4041
Etou Presse Fouloir

144264041
H036542-0320: RNCC: 3 | RNVC: 2

30 Aug 1988

4730-14-484-9942
Raccord Filete

144849942
1705-904120-REP7: RNCC: 3 | RNVC: 2
K7739-1705-904120-REP7: RNCC: 5 | RNVC: 2

19 Dec 1996

4730-14-551-5609
Lubrication Fitting

145515609
15003: RNCC: 3 | RNVC: 2

3 Oct 2006

4730-14-382-8708
Tube To Boss Straight Adapter

143828708
PE60807H12: RNCC: 3 | RNVC: 2

26 Jul 2000

4730-14-406-1544
Fluid Passage Bolt

144061544
P109235: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-286-9541
Tube To Boss Straight Adapter

142869541
12422110T: RNCC: 3 | RNVC: 2
42211: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-555-0773
Flexible Tube Coupling Assembly

145550773
L20SF3: RNCC: 3 | RNVC: 2

27 Sep 2007

4730-14-435-3254
Tube Tee

144353254
10RA10X8X10NU: RNCC: 3 | RNVC: 2

7 Nov 1989

4730-14-402-0768
Hose To Boss Straight Adapter

144020768
360645019: RNCC: 3 | RNVC: 9

26 Jun 1985

4730-14-328-6383
Sediment Strainer Element

143286383
16380003: RNCC: 3 | RNVC: 2
16380003: RNCC: 5 | RNVC: 9
16380003: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-332-8999
Fluid Pressure Line Multiple Connector

143328999
L328018: RNCC: 3 | RNVC: 2
0853571700: RNCC: 5 | RNVC: 2
35265: RNCC: 5 | RNVC: 2
328018: RNCC: 5 | RNVC: 2
B295717: RNCC: 5 | RNVC: 2
295717: RNCC: 5 | RNVC: 9
0853571700: RNCC: 5 | RNVC: 9
DBAL328018: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-268-0650

4730-14-366-6060

4730-14-321-5798

4730-14-576-6318
Tube Tee

145766318
10658252: RNCC: 3 | RNVC: 1

2 Jul 2013

4730-14-311-2587

4730-14-473-8089
Grooved Clamp Connecting Coupling Half

144738089
9522000330: RNCC: 3 | RNVC: 2
9522000330: RNCC: 5 | RNVC: 2
A05040315: RNCC: 5 | RNVC: 2
A05040315: RNCC: 5 | RNVC: 9
A05040315: RNCC: 5 | RNVC: 9
F300 0T 018 3125: RNCC: 6 | RNVC: 9

11 Jan 1995

4730-14-378-8916
Tube To Boss Straight Adapter

143788916
2443457003: RNCC: 3 | RNVC: 2
2443457003: RNCC: 5 | RNVC: 2
3413457001: RNCC: 5 | RNVC: 2
3413457001: RNCC: 5 | RNVC: 2
0003012359: RNCC: 5 | RNVC: 2
3012359: RNCC: 5 | RNVC: 9

6 Sep 1982

4730-14-506-0321
Tube Coupling

145060321
RA1M502118322: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-507-4588
Pipeline Flexible Spacer

145074588
98657300040: RNCC: 3 | RNVC: 2

9 Jul 1998

4730-14-502-2518
Fluid Passage Bolt

145022518
17263: RNCC: 3 | RNVC: 2

2 Dec 1997

4730-14-416-5838
Pipe Flange

144165838
4730GG-DN30: RNCC: 2 | RNVC: 2
MEC10413: RNCC: 3 | RNVC: 2
4730GG-DN30: RNCC: 5 | RNVC: 2

19 Jun 1987

4730-14-536-0483
Tube To Hose Straight Adapter

145360483
PE65409E16: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-290-6530

4730-14-271-0210
Tube To Boss Straight Adapter

142710210
3160S75-20-720: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-457-9173
Pipeline Flexible Spacer

144579173
DILATOFLEX-NT1GZ-DN300PN16: RNCC: 3 | RNVC: 2
NT1/300/GZ/VR/CS/PN16: RNCC: 5 | RNVC: 2

1 Oct 1992

4730-14-333-5066
Tube Tee

143335066
GSM656-001F6: RNCC: 3 | RNVC: 2
GSM656-01F6: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-462-2713
Fluid Flow Restrictor Unit

144622713
GA130-71140-20: RNCC: 3 | RNVC: 2

15 Apr 1993

4730-14-525-6336
Tube To Boss Straight Adapter

145256336
20 236 916 5300: RNCC: 3 | RNVC: 2
236-916-5300: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-342-2883
Tube Tee

143422883
LN324-061TYPEXVII: RNCC: 3 | RNVC: 2
M10-74A17: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-227-7855
Air Hose Connector

142277855
NO PRIMARY REF14-227-7855: RNCC: 3 | RNVC: 2
1008: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-355-5600
Tube To Boss Straight Adapter

143555600
5BAG17-12-17CYL: RNCC: 3 | RNVC: 2
G1DM17-12X17CYL: RNCC: 3 | RNVC: 2
AAG17X12-17N: RNCC: 3 | RNVC: 2

19 Mar 1979

4730-14-446-2895
Tube To Boss Straight Adapter

144462895
LL118-CS2008S: RNCC: 3 | RNVC: 2
84052022: RNCC: 5 | RNVC: 2

12 Mar 1991

4730-14-444-2827
Tube To Boss Straight Adapter

144442827
MKE02-31: RNCC: 3 | RNVC: 2

3 Jan 1991

4730-14-470-8109
Pipe Flange

144708109
E29203-11B-PN40-DN32BF42: RNCC: 2 | RNVC: 2
99070225042: RNCC: 5 | RNVC: 2

6 Jul 1994

4730-14-392-7357
Tube To Boss Straight Adapter

143927357
6157785: RNCC: 3 | RNVC: 2
157-785: RNCC: 5 | RNVC: 2
FOE6157785: RNCC: 5 | RNVC: 9

7 Apr 1984

4730-14-513-3258
Tube Repair Plug

145133258
PASF64000-004: RNCC: 2 | RNVC: 2

15 Mar 1999

4730-14-367-5098
Quick Disconnect Coupling Half

143675098
K96-10-604: RNCC: 3 | RNVC: 2
K96-10-604D: RNCC: 5 | RNVC: 2

19 Jan 1981

4730-14-380-9722
Tube To Boss Straight Adapter

143809722
UMSI12M3-8BSPT: RNCC: 3 | RNVC: 9

14 Dec 1982

4730-14-359-7369
Tube To Boss Straight Adapter

143597369
G4401-4S: RNCC: 3 | RNVC: 2
582404: RNCC: 5 | RNVC: 2

15 Oct 1979

4730-14-437-2445
Raccord Azote

144372445
055U08-533436P: RNCC: 3 | RNVC: 2
0533436P00: RNCC: 5 | RNVC: 2
85-694-0131: RNCC: 6 | RNVC: 9

24 Jan 1990

4730-14-511-6624
Quick Disconnect Coupling Half

145116624
RF5585-0-00: RNCC: 3 | RNVC: 2

8 Jan 1999

4730-14-377-1752
Tube Tee

143771752
9TR16-8-16NU: RNCC: 3 | RNVC: 2
5000165684: RNCC: 5 | RNVC: 2
5000165684: RNCC: 5 | RNVC: 9

17 May 1982

4730-14-426-2707
Reserv Tete Raccord

144262707
GSM514-001F68: RNCC: 3 | RNVC: 2

11 Aug 1988

4730-14-222-6530
Tube Fitting Brazing Ferrule

142226530
GSM1297F1AF1BTABLEAU1D1-30I26: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-333-4708

4730-14-260-8361
Quick Disconnect Coupling Half

142608361
RBE06-6150/EC/15: RNCC: 3 | RNVC: 2
U33/9/1,5: RNCC: 5 | RNVC: 2
U33-9-1-5: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-263-6379

4730-14-460-2079
Fluid Pressure Line Multiple Connector

144602079
109-8/JE12X100F: RNCC: 3 | RNVC: 2

15 Jan 1993

4730-14-272-7766

4730-14-041-5125

4730-14-274-6967

4730-14-314-6132
Fluid Pressure Line Multiple Connector

143146132
103092200102: RNCC: 3 | RNVC: 2
103092200102: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-417-6841
Tube To Boss Straight Adapter

144176841
12-14-15-21CYLNU: RNCC: 3 | RNVC: 2
EMDAS05349: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-481-3783
Fluid Pressure Line Multiple Connector

144813783
261997: RNCC: 3 | RNVC: 2

1 May 1996

4730-14-335-3053
Tube Tee

143353053
191577: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-379-9317
Tube Tee

143799317
7787: RNCC: 3 | RNVC: 9

20 Oct 1982

4730-14-364-8737
Fluid Pressure Line Multiple Connector

143648737
2142BN324-529: RNCC: 3 | RNVC: 2

2 Sep 1980

4730-14-332-0643
Bulkhead Hose Connector

143320643
R5808Z36: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-327-5487
Tube To Boss Straight Adapter

143275487
01361417: RNCC: 3 | RNVC: 2
1361417: RNCC: 5 | RNVC: 2
136417: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-267-4537
Sediment Strainer Element

142674537
30054A: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-493-3131
Flange To Hose Elbow

144933131
601668: RNCC: 3 | RNVC: 2
F300 0T 012 1736: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-493-5024
Tube To Boss Straight Adapter

144935024
5000785005: RNCC: 3 | RNVC: 2
F300 0T 013 3054: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-230-5955
Tube Tee

142305955
300733: RNCC: 3 | RNVC: 2
300733: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-220-6136
Tube Tee

142206136
R081208: RNCC: 3 | RNVC: 2
R8X12X8: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-273-5334
Pipe Flange

142735334
7062SF1F1F216UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-282-0437
Tube Coupling

142820437
300186: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-456-4483
Hose To Boss Straight Adapter

144564483
624389: RNCC: 3 | RNVC: 2

2 Jul 1992

4730-14-333-7458
Tube To Boss Straight Adapter

143337458
2356-71: RNCC: 3 | RNVC: 2

23 Apr 1976

4730-14-444-5233
Tube To Boss Straight Adapter

144445233
123067206: RNCC: 3 | RNVC: 9

14 Jan 1991

4730-14-485-0541
Fuel Feeder Manifold

144850541
332A08-4917-59: RNCC: 3 | RNVC: 2

19 Dec 1996

4730-14-446-8896
Tube Union

144468896
3L10CLNU: RNCC: 3 | RNVC: 2
203400110NU: RNCC: 5 | RNVC: 2

17 Apr 1991

4730-14-309-7827
Fluid Pressure Line Multiple Connector

143097827
306260: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-319-8919
Tube To Boss Straight Adapter

143198919
140M222: RNCC: 3 | RNVC: 2
140M222: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-278-3015
Adaptateur

142783015
MX40-80-40: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-283-3953
Raccord Tournant

142833953
A24932-10: RNCC: 3 | RNVC: 2
A24932-10: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-316-9549

4730-14-283-1621

4730-14-234-4277
Bride De Fixation D

142344277
17899TREP1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-389-7789
Tube Tee

143897789
T54-029TE90DEGDIAM40: RNCC: 2 | RNVC: 2

20 Dec 1983

4730-14-298-8325
Tube Coupling Inverted Nut

142988325
NO PRIMARY REF14-298-8325: RNCC: 3 | RNVC: 2
80587: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-553-1158
Tube To Boss Straight Adapter

145531158
GE15LR3-8EDOMDCF: RNCC: 3 | RNVC: 2
437191: RNCC: 5 | RNVC: 2
GE15LR3-8EDOMDCF: RNCC: 5 | RNVC: 9

5 Mar 2007

4730-14-340-7714
Tube Tee

143407714
GSM163-015F17: RNCC: 3 | RNVC: 2
GSM163-15F17: RNCC: 5 | RNVC: 2

14 Feb 1977

4730-14-498-3903
Tube To Boss Straight Adapter

144983903
91961192: RNCC: 3 | RNVC: 2
12-04-01-108: RNCC: 5 | RNVC: 9
F300 0T 004 9922: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-452-1519
Tube To Boss Straight Adapter

144521519
A580-007: RNCC: 3 | RNVC: 2

18 Dec 1991

4730-14-443-7505
Tube Tee

144437505
TBI12-16: RNCC: 3 | RNVC: 9
91484002: RNCC: 5 | RNVC: 2

5 Dec 1990

4730-14-578-6499
Lubrication Fitting

145786499
NO PRIMARY REF 14-578-6499: RNCC: 3 | RNVC: 2
0410406: RNCC: 5 | RNVC: 2
U0410406: RNCC: 5 | RNVC: 2
Y00014318: RNCC: 5 | RNVC: 2

16 Dec 2013

4730-14-361-0165
Bloc De Raccordemen

143610165
B0234-001F6: RNCC: 3 | RNVC: 2

19 Dec 1979

4730-14-362-8283
Swivel Retaining Pipe Flange

143628283
GSM166-017F59: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-423-4627
Pipe Flange

144234627
UA50088006PN420-11B2SDN65: RNCC: 2 | RNVC: 2
4730HCPN420DN06511B2S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-339-0917
Tube To Boss Straight Adapter

143390917
7062BB1B1966VCTT1-14Z2CN18-10: RNCC: 2 | RNVC: 2
AN15056-2: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-409-7210
Tube To Boss Straight Adapter

144097210
OUT50153-5: RNCC: 3 | RNVC: 2
0UT50153-5: RNCC: 5 | RNVC: 2

28 May 1986

4730-14-512-8180
Tube Union

145128180
205206: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-371-3110
Tube Tee

143713110
HY235-1: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-571-1653
Hydraulic System Accessories Manifold

145711653
A568860: RNCC: 3 | RNVC: 2

23 Feb 2012

4730-14-212-9261

4730-14-348-4711

4730-14-262-1623

4730-14-521-0900
Quick Disconnect Coupling Half

145210900
1022.512: RNCC: 3 | RNVC: 2

6 Jul 2000

4730-14-436-8788
Tube Coupling

144368788
RSM37947F16REP44: RNCC: 3 | RNVC: 2

8 Jan 1990

4730-14-323-4833
Pipe Flange

143234833
0281100580: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-374-8726
Tube Coupling

143748726
771: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-348-3302
Quick Disconnect Coupling Assembly

143483302
S065C: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-537-7872
Tube Fitting Compression Ferrule

145377872
PM1A729009205: RNCC: 3 | RNVC: 2
PM1A729009205: RNCC: 5 | RNVC: 2

25 Nov 2003

4730-14-457-5756
Fluid Pressure Line Multiple Connector

144575756
5000658912: RNCC: 3 | RNVC: 2
89287569: RNCC: 5 | RNVC: 2

10 Sep 1992

4730-14-412-1627
Hose To Boss Straight Adapter

144121627
224553: RNCC: 3 | RNVC: 2

8 Oct 1986

4730-14-325-8992
Pipe Flange

143258992
AS34TV105REP2: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-385-2234
Fluid Pressure Line Multiple Connector

143852234
9418253458: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-321-6748
Fluid Passage Bolt

143216748
9777030034: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-458-8624
Tube Tee

144588624
TELA 8L: RNCC: 3 | RNVC: 2
80X2426A041: RNCC: 5 | RNVC: 2

5 Nov 1992

4730-14-419-4749
Fluid Pressure Line Multiple Connector

144194749
DMSE1PELB24B52PSR: RNCC: 3 | RNVC: 2
M4ZS560D4018A: RNCC: 5 | RNVC: 2

21 Oct 1987

4730-14-369-9754
Sediment Strainer Element

143699754
P106622D: RNCC: 3 | RNVC: 2
P106622D: RNCC: 6 | RNVC: 9

18 May 1981

4730-14-269-0171
Tube Tee

142690171
TL40: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-475-4524
Bossage Cape

144754524
BSNGCVF033F16A: RNCC: 3 | RNVC: 2

6 Apr 1995

4730-14-561-7159
Tube Elbow

145617159
C8UNPMB8M22: RNCC: 3 | RNVC: 2
C8UNPMB8M22: RNCC: 5 | RNVC: 9

25 Aug 2009

4730-14-230-7150
Pipe Flange

142307150
GSM1487DET3: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-551-0420
Fluid Passage Bolt

145510420
191620: RNCC: 3 | RNVC: 2
7400191620: RNCC: 5 | RNVC: 2

24 Aug 2006

4730-14-503-2673
Hydraulic Manifold Assembly

145032673
332A52-1017-10: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-493-6675
Fluid Flow Restrictor Unit

144936675
384837: RNCC: 3 | RNVC: 2
EPA21000-281: RNCC: 5 | RNVC: 1
384837-001: RNCC: 5 | RNVC: 9

8 Oct 1997

4730-14-376-0438
Pipe Flange

143760438
366A32-1089-20: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-481-4676
Quick Disconnect Coupling Half

144814676
SSH4-62YBSPP: RNCC: 3 | RNVC: 2
SSH4-62BSPP: RNCC: 5 | RNVC: 2
352258908595: RNCC: 5 | RNVC: 2

8 May 1996

4730-14-207-9043
Tube To Boss Straight Adapter

142079043
1C489-54: RNCC: 3 | RNVC: 2
489-54: RNCC: 3 | RNVC: 2
0013954: RNCC: 5 | RNVC: 2
001-3954: RNCC: 5 | RNVC: 2
FOE1C489-54: RNCC: 5 | RNVC: 9
FOE489-54: RNCC: 5 | RNVC: 9
85-688-3183: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-495-6436
Union

144956436
L48375-54: RNCC: 3 | RNVC: 2
F300 0T 019 5716: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-522-7744
Self-Sealing Coupling Assembly

145227744
N00327498: RNCC: 3 | RNVC: 2
SCB08.7103/IC/VR/KB/SP/N00327498: RNCC: 5 | RNVC: 2
91784161: RNCC: 5 | RNVC: 2

22 Nov 2000

4730-14-280-5062

4730-14-325-8871

4730-14-330-6529

4730-14-227-1550
Genouillere Special

142271550
110588: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-223-3391
Raccord Special

142233391
1-79462: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-040-6756
Tube Coupling

140406756
3751R25A: RNCC: 3 | RNVC: 2
3751R25A: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-549-0820
Tube To Boss Straight Adapter

145490820
RA1M726212002: RNCC: 3 | RNVC: 2

2 Mar 2006

4730-14-525-6281
Tube To Boss Straight Adapter

145256281
20 236 911 0120: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-320-3105
Fluid Pressure Line Multiple Connector

143203105
0076377020: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-470-2802
Sediment Strainer Element

144702802
BSNGCFF005F7B: RNCC: 3 | RNVC: 2

14 Jun 1994

4730-14-452-7498
Threaded Tube Fitting Plug

144527498
BM15: RNCC: 3 | RNVC: 2
91629882: RNCC: 5 | RNVC: 2

15 Jan 1992

4730-14-299-9761
Tube Tee

142999761
TAG13CL5XG13XG13N: RNCC: 3 | RNVC: 2
44508: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-534-2596
Fluid Passage Bolt

145342596
DE6573: RNCC: 3 | RNVC: 2
EN050146: RNCC: 6 | RNVC: 9

19 Mar 2003

4730-14-301-0296
Quick Disconnect Coupling Assembly

143010296
SJS75X79BDB: RNCC: 3 | RNVC: 2
SJS75X79BH: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-529-8373
Tube To Boss Straight Adapter

145298373
VKA8: RNCC: 3 | RNVC: 2
VKA8: RNCC: 5 | RNVC: 9

17 Apr 2002

4730-14-204-9276
Tube Fitting Brazing Ferrule

142049276
8062: RNCC: 3 | RNVC: 2
8062: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-211-4323
Fluid Pressure Line Multiple Connector

142114323
43264: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-350-2702
Tube Tee

143502702
701817586: RNCC: 3 | RNVC: 2
T3040CX10001F7E222IN0X: RNCC: 5 | RNVC: 2

14 Jun 1978

4730-14-226-5319
Fluid Pressure Line Multiple Connector

142265319
1453385500: RNCC: 3 | RNVC: 2
1453385500: RNCC: 5 | RNVC: 2
0003012321: RNCC: 5 | RNVC: 2
0941620029: RNCC: 5 | RNVC: 2
WRV1FL1X: RNCC: 5 | RNVC: 9
0003012321: RNCC: 5 | RNVC: 9
0941620029: RNCC: 5 | RNVC: 9
3012321: RNCC: 5 | RNVC: 9
941620029: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-541-1542
Flexible Tube Coupling Assembly

145411542
18336: RNCC: 3 | RNVC: 2

14 May 2004

4730-14-259-5857
Sediment Strainer Body

142595857
FE1912: RNCC: 3 | RNVC: 9

1 Jan 1969

4730-14-332-6898
Tube Tee

143326898
GSM523-026F67: RNCC: 3 | RNVC: 2
411MA295F9: RNCC: 5 | RNVC: 2
411MA295R1F3: RNCC: 5 | RNVC: 2
411MA295R1F5: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-305-8874
Tube To Boss Straight Adapter

143058874
Q1-52-10-12X17CYL: RNCC: 3 | RNVC: 2
4K10-12-17CYL: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-290-1368
Sediment Strainer Element

142901368
GMS476-008: RNCC: 3 | RNVC: 2
401MA106REP2: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-560-7809
Pipe To Hose Straight Adapter

145607809
36010817: RNCC: 3 | RNVC: 2
3601 08 17: RNCC: 5 | RNVC: 2
70-95-550: RNCC: 5 | RNVC: 2

26 May 2009

4730-14-382-2846
Threaded Tube Fitting Plug

143822846
NO PRIMARY REF14-382-2846: RNCC: 3 | RNVC: 2
4097DN25: RNCC: 5 | RNVC: 9

17 Feb 1983

4730-14-465-3876
Flange To Boss Straight Adapter

144653876
Y07176-00-0000P015: RNCC: 3 | RNVC: 2

22 Sep 1993

4730-14-298-5750
Tube To Boss Straight Adapter

142985750
Q1G5217-36250Z737: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-315-0660
Fluid Passage Bolt

143150660
AD4-58582: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-512-6387
Tube Coupling

145126387
NO PRIMARY REF14-512-6387: RNCC: 3 | RNVC: 2
NNP 4730864531878: RNCC: 5 | RNVC: 9

17 Feb 1999

4730-14-511-7184
Pipeline Flexible Spacer

145117184
DLT055228: RNCC: 3 | RNVC: 2
4730-65-0000211: RNCC: 6 | RNVC: 9

13 Jan 1999

4730-14-430-6007
Raccord Valve

144306007
703702-00: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-399-4875
Fluid Passage Bolt

143994875
12100854: RNCC: 3 | RNVC: 2
91381531: RNCC: 5 | RNVC: 2
12010-12810: RNCC: 5 | RNVC: 2
91381531: RNCC: 5 | RNVC: 2
12010-12810: RNCC: 5 | RNVC: 9
12100854: RNCC: 5 | RNVC: 9

23 Apr 1997

4730-14-222-7293
Tube Tee

142227293
GSM1297FE3-17TABLEAU2: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-563-2850
Tube Coupling

145632850
GRS-10-6: RNCC: 3 | RNVC: 2
91711931: RNCC: 5 | RNVC: 2

20 Jan 2010

4730-14-343-5664
Fluid Pressure Line Multiple Connector

143435664
A0423-001F4: RNCC: 3 | RNVC: 2

16 Jun 1977

4730-14-394-2029
Embout Reduction A

143942029
Q5-5SKR30-10X2-5: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-563-9309
Hose Clamp

145639309
TORRO110-130/12-W4: RNCC: 3 | RNVC: 2

26 Mar 2010

4730-14-440-6717
Bulkhead Hose Connector

144406717
332A55-0120-09: RNCC: 3 | RNVC: 2

18 Jul 1990

4730-14-494-8805
Tube To Boss Straight Adapter

144948805
NO PRIMARY REF14-494-8805: RNCC: 3 | RNVC: 2
5417849: RNCC: 5 | RNVC: 9
F300 0T 018 0351: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-032-2734
Sediment Strainer Element

140322734
01000676E00065: RNCC: 3 | RNVC: 2
01000676E00065: RNCC: 3 | RNVC: 9
10-65-67-100MICR0NS: RNCC: 5 | RNVC: 9

17 May 1982

4730-14-326-1905
Tube To Boss Straight Adapter

143261905
NO PRIMARY REF14-326-1905: RNCC: 3 | RNVC: 2
CA3MN57-50X60BSPCYL: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-333-5081
Sous Ensemble Bride

143335081
GSM166-004F23: RNCC: 3 | RNVC: 2
GSM166-04F23: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-328-9597
Tube Tee

143289597
Q1-5TR25X14X20NNNU: RNCC: 3 | RNVC: 2
R1-5TR25X14X20NNNU: RNCC: 3 | RNVC: 2
GSM164-012F23: RNCC: 3 | RNVC: 2
TRK25X14X20NNU: RNCC: 3 | RNVC: 2
10RCA25X14X20NU: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-440-1222
Bride A Zinc

144401222
MAT162-0117F10: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-505-3351
Tube Union

145053351
GE15-PL-M16X1.5-0MD: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-224-3915
Tube Fitting Brazing Ferrule

142243915
GSM163-002F7-41-5-1-36: RNCC: 3 | RNVC: 2
GSM163-02F7-41-5-1-36: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-523-4111
Tube To Boss Straight Adapter

145234111
G2027-8-12S: RNCC: 3 | RNVC: 2

19 Jan 2001

4730-14-222-2211
Fluid Pressure Line Multiple Connector

142222211
L351003: RNCC: 3 | RNVC: 2
1080: RNCC: 5 | RNVC: 2
X10370-68: RNCC: 5 | RNVC: 2
351003: RNCC: 5 | RNVC: 2
702718: RNCC: 5 | RNVC: 9
DBAL351003: RNCC: 5 | RNVC: 9
062054878: RNCC: 5 | RNVC: 9
54878: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-514-0992
Quick Disconnect Coupling Half

145140992
RBE06-7151/IA/JV: RNCC: 3 | RNVC: 2

22 Apr 1999

4730-14-429-2118
Quick Disconnect Coupling Half

144292118
50-01-021: RNCC: 3 | RNVC: 2

11 Jan 1989

4730-14-338-2511
Tube Fitting Brazing Ferrule

143382511
U1198F5-133UE8: RNCC: 2 | RNVC: 2
CN9: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-536-0722
Tube To Hose Straight Adapter

145360722
4750-708-4: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-285-3707
Quick Disconnect Coupling Half

142853707
410399-2: RNCC: 3 | RNVC: 2
9B6000M2PD4: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-404-9155
Fluid Passage Bolt

144049155
4347-480-0: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-256-9318

4730-14-368-4302
Tu Droit Adaptateur

4730-14-403-4136

4730-14-317-8792

4730-14-362-2680
Tube To Boss Straight Adapter

143622680
12-6-8-13: RNCC: 3 | RNVC: 2

30 Oct 2001

4730-14-306-7684
Bride A Zinc

143067684
000MA0781F5REP2DN32: RNCC: 3 | RNVC: 2
000MA781F5REP2DN32: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-414-6824
Threaded Tube Fitting Plug

144146824
4730HK-BSC33,7: RNCC: 2 | RNVC: 2
MEC10523: RNCC: 3 | RNVC: 2

24 Feb 1987

4730-14-537-6300
Tube To Boss Straight Adapter

145376300
24-851423-1: RNCC: 3 | RNVC: 2

13 Nov 2003

4730-14-438-9554
Tube To Boss Straight Adapter

144389554
AIWCYL14-3-8: RNCC: 3 | RNVC: 9
91517851: RNCC: 5 | RNVC: 2

11 Apr 1990

4730-14-262-1749

4730-14-371-8756
Raccord Orientable

143718756
GSM164-047F9: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-419-0732
Tube To Boss Straight Adapter

144190732
P4G12-13-16X150NU: RNCC: 3 | RNVC: 2

30 Sep 1987

4730-14-339-9927
Bulkhead Hose Connector

143399927
GSM426-012F4: RNCC: 3 | RNVC: 2
A0009-004F4: RNCC: 5 | RNVC: 2
GSM426-12F4: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-311-8537
Raccor Dispos Demar

143118537
0064581540: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-268-6401

4730-14-401-3230
Circuit P2

144013230
02K5545110: RNCC: 3 | RNVC: 2

5 Jun 1985

4730-14-310-4768

4730-14-339-9743
Lubricant Pressure Relief Fitting

143399743
100004587: RNCC: 3 | RNVC: 9

18 Jan 1977

4730-14-314-1052
Sediment Strainer Element

143141052
401MA0394REP13-3: RNCC: 3 | RNVC: 2
401MA394REP13-3: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-285-0333
Tube To Boss Straight Adapter

142850333
R5806Z19: RNCC: 3 | RNVC: 2
ARSR58Z19: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-453-9919
Quick Disconnect Coupling Half

144539919
31220856: RNCC: 3 | RNVC: 2

19 Mar 1992

4730-14-491-0396
Tube To Boss Straight Adapter

144910396
4741072: RNCC: 3 | RNVC: 2
F300 0T 001 1470: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-335-5055
Fluid Pressure Line Multiple Connector

143355055
F10A740020: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-391-7110
Tube To Boss Straight Adapter

143917110
742PN14: RNCC: 3 | RNVC: 2
742PN14: RNCC: 3 | RNVC: 2
74742PN14: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-360-7822
Fluid Pressure Line Multiple Connector

143607822
0000719579: RNCC: 3 | RNVC: 2
0000719579: RNCC: 5 | RNVC: 9
719579: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-503-2029
Hose Coupling Assembly

145032029
RP1A500055400: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-426-1061
Fluid Pressure Line Multiple Connector

144261061
8814020216: RNCC: 3 | RNVC: 2

4 Aug 1988

4730-14-542-1921
Fluid Passage Bolt

145421921
10027687: RNCC: 3 | RNVC: 2
10027687: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-253-9825
Tube To Boss Straight Adapter

142539825
272048: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-424-4611
Tube To Boss Straight Adapter

144244611
PZCF169: RNCC: 3 | RNVC: 2

19 May 1988

4730-14-387-0996
Pipeline Flexible Spacer

143870996
DILAT0FLEXNT125HHMN7068: RNCC: 3 | RNVC: 9

24 Aug 1983

4730-14-519-4790
Tube-Hose Fitting Compression Sleeve

145194790
D10LLA3C: RNCC: 3 | RNVC: 2
426289: RNCC: 5 | RNVC: 9

22 Mar 2000

4730-14-412-2254
Pipe Flange

144122254
0301517690: RNCC: 3 | RNVC: 2

8 Oct 1986

4730-14-576-9611
Quick Disconnect Coupling Half

145769611
RBE08.7103/IA/OD: RNCC: 3 | RNVC: 2

25 Jul 2013

4730-14-367-7220

4730-14-235-1464

4730-14-444-8689
Self-Sealing Coupling Half

144448689
16787856: RNCC: 3 | RNVC: 2
S0F75-0 3-4: RNCC: 5 | RNVC: 1
16787856: RNCC: 5 | RNVC: 9

23 Jan 1991

4730-14-269-1996
Pipe Flange

142691996
7066ED1M48-3: RNCC: 2 | RNVC: 2
4730BH-48,3M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-270-2656
Raccord

142702656
1-1088ZX00-04: RNCC: 3 | RNVC: 2
1-1088ZX00-04: RNCC: 5 | RNVC: 9
1-1088ZX00-04: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-397-9387
Tube To Hose Straight Adapter

143979387
1204-16 1-2BGS: RNCC: 3 | RNVC: 2
5A16 1-2BGS: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-262-2447
Raccord Intermediai

142622447
6332796: RNCC: 3 | RNVC: 2
PA361-122M21P24: RNCC: 3 | RNVC: 9
6332796: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-542-1493
Tube Union

145421493
41221-6,35-1/4SAE: RNCC: 3 | RNVC: 2
41221-6,35-1/4SAE: RNCC: 3 | RNVC: 2
551010: RNCC: 5 | RNVC: 2
SC086670: RNCC: 6 | RNVC: 9

8 Jul 2004

4730-14-304-8712
Raccord Support Gra

143048712
NO PRIMARY REF14-304-8712: RNCC: 3 | RNVC: 2
14915: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-031-8376

4730-14-564-7976
Fluid Pressure Line Multiple Connector

145647976
1505.04.06.05: RNCC: 3 | RNVC: 2
1505-04-06-05: RNCC: 5 | RNVC: 2

7 Jun 2010

4730-14-573-3409
Hose Clamp

145733409
030141 9B: RNCC: 3 | RNVC: 2
A210607000152: RNCC: 5 | RNVC: 2

5 Oct 2012

4730-14-260-1477
Sediment Strainer Element

142601477
3210-26076-511: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-275-7214

4730-14-309-9211
Tube Union

143099211
7372: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-334-0171

4730-14-263-1972
Raccord Droit

142631972
NO PRIMARY REF14-263-1972: RNCC: 3 | RNVC: 2
417084: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-438-2255
Tube To Boss Straight Adapter

144382255
A82851: RNCC: 3 | RNVC: 2
85-694-1042: RNCC: 6 | RNVC: 9

7 Mar 1990

4730-14-366-5755
Collect Distri Huil

143665755
365A75-2012-01: RNCC: 3 | RNVC: 2

21 Feb 1996

4730-14-236-6344
Tube To Boss Straight Adapter

142366344
NO PRIMARY REF14-236-6344: RNCC: 3 | RNVC: 2
1851-1-60: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-422-1155
Quick Disconnect Coupling Half

144221155
47806: RNCC: 3 | RNVC: 2
MRA04-7806: RNCC: 3 | RNVC: 2
MR04-7806: RNCC: 5 | RNVC: 2

23 Feb 1988

4730-14-514-0938
Tube To Hose Straight Adapter

145140938
A1-30: RNCC: 3 | RNVC: 2

22 Apr 1999

4730-14-561-7476
Hose To Grooved Clamp Coupling Straight Adapter

145617476
MAL 9-38018: RNCC: 3 | RNVC: 2

1 Sep 2009

4730-14-351-1143
Tube To Boss Straight Adapter

143511143
6817297-002: RNCC: 3 | RNVC: 2

10 Aug 1978

4730-14-367-6991
Tube Tee

143676991
366A54-1005-20: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-572-9432
Tube Cap

145729432
702A30-1811-21: RNCC: 3 | RNVC: 2
702A30181121: RNCC: 5 | RNVC: 2

30 Aug 2012

4730-14-355-5712
Tube To Boss Straight Adapter

143555712
G1DM13-8X13C0: RNCC: 3 | RNVC: 2
ACAG13X8-13N: RNCC: 3 | RNVC: 2

19 Mar 1979

4730-14-491-9147
Fluid Pressure Line Multiple Connector

144919147
NO PRIMARY REF14-491-9147: RNCC: 3 | RNVC: 2
TB3030232: RNCC: 5 | RNVC: 9
F300 0T 006 0305: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-314-0954
Bulkhead Hose Connector

143140954
GSM169-018F4REP60: RNCC: 3 | RNVC: 2
ESQ1-506-12: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-042-9060
Bulkhead Hose Connector

140429060
A11A221274311: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-341-1489
Fluid Passage Bolt

143411489
NO PRIMARY REF14-341-1489: RNCC: 3 | RNVC: 2
12027: RNCC: 5 | RNVC: 9
1202750: RNCC: 5 | RNVC: 9

16 Mar 1977

4730-14-369-2964
Tube Union

143692964
A11A522360642: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-269-1918
Pipe Flange

142691918
7066CE1M48-3: RNCC: 2 | RNVC: 2
4730BC-48,3M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-405-4442
Tube Coupling

144054442
CB3A12 1/2: RNCC: 3 | RNVC: 9

27 Nov 1985

4730-14-449-7659
Fluid Passage Bolt

144497659
4730HK-MCT17,2: RNCC: 2 | RNVC: 2
MEC10528: RNCC: 3 | RNVC: 2

6 Sep 1991

4730-14-385-7086
Tube To Boss Straight Adapter

143857086
246E1-2: RNCC: 3 | RNVC: 9

26 Jul 1983

4730-14-391-7692
Bulkhead Hose Connector

143917692
DA2C525090012: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-542-2050
Fluid-Emulsion Spray Nozzle

145422050
511061208: RNCC: 3 | RNVC: 2
511061208: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-535-0490
Quick Disconnect Coupling Half

145350490
T947A10T0014: RNCC: 1 | RNVC: 2
947100014000: RNCC: 3 | RNVC: 2

30 Apr 2003

4730-14-338-4032
Tube To Boss Straight Adapter

143384032
A0132005FF39: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-547-9436
Lubrication Fitting

145479436
9353427: RNCC: 3 | RNVC: 2

29 Nov 2005

4730-14-545-2122
Flange To Hose Straight Adapter

145452122
PW3232: RNCC: 3 | RNVC: 2
6KK115: RNCC: 5 | RNVC: 2

24 Mar 2005

4730-14-318-3414

4730-14-575-8938
Tube-Hose Adapter Body

145758938
8816517002: RNCC: 3 | RNVC: 2

15 May 2013

4730-14-523-7225
Tube To Boss Straight Adapter

145237225
6784602000: RNCC: 3 | RNVC: 2
U5037593: RNCC: 3 | RNVC: 2

31 Jan 2001

4730-14-391-7771
Equipe Embout

143917771
DA2C512513610: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-402-0606
Fluid Pressure Line Multiple Connector

144020606
214142: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-213-0472

4730-14-421-2815
Hose To Boss Straight Adapter

144212815
5-459303: RNCC: 3 | RNVC: 9
44032200: RNCC: 5 | RNVC: 2

14 Jan 1988

4730-14-351-1756
Fluid Passage Bolt

143511756
061225318-7: RNCC: 3 | RNVC: 9

10 Aug 1978

4730-14-374-3065
Self-Sealing Coupling Half

143743065
4100-63-7: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-316-0013
Quick Disconnect Coupling Half

143160013
461800-1: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-391-2991
Tube To Boss Straight Adapter

143912991
10FMTXS: RNCC: 3 | RNVC: 2
FTXS16-1-2: RNCC: 5 | RNVC: 2

1 Mar 1984

4730-14-455-8714
Tube To Boss Straight Adapter

144558714
F40XS25-3-4: RNCC: 3 | RNVC: 2
91727081: RNCC: 5 | RNVC: 2

11 Jun 1992

4730-14-262-9558
Bride Levage Avec S

142629558
DLT005244: RNCC: 3 | RNVC: 2
DLT005244: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-465-1326
Obture Embout

144651326
9970-143-560: RNCC: 3 | RNVC: 2

15 Sep 1993

4730-14-212-1223

4730-14-568-8729
Tube Nipple

145688729
5000608568: RNCC: 3 | RNVC: 2
25297784: RNCC: 5 | RNVC: 2

13 Jul 2011

4730-14-367-7202

4730-14-297-0455
Boite A Purge Equip

142970455
121B77-109-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-500-7726
Tube To Boss Straight Adapter

145007726
XGE10-L-7-16-20UNFA3C: RNCC: 3 | RNVC: 2
XGE10L7-16-20UNFA3C: RNCC: 3 | RNVC: 2
F300 0T 024 7925: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-387-8873
Tube Tee

143878873
P166D121616S: RNCC: 3 | RNVC: 2
723 D 12 16 16S: RNCC: 3 | RNVC: 2
723D121616S: RNCC: 5 | RNVC: 2
74723D121616S: RNCC: 5 | RNVC: 2
74723D121616S: RNCC: 5 | RNVC: 2
723D12 16 16S: RNCC: 5 | RNVC: 2
723D12-16-16S: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-226-7162

4730-14-427-3280
Tube Tee

144273280
4730HDING088,9X3,2-60,3X2,9: RNCC: 2 | RNVC: 2

13 Oct 1988

4730-14-535-4574
Self-Sealing Coupling Half

145354574
NP708891-1: RNCC: 3 | RNVC: 2
NP708891.1: RNCC: 5 | RNVC: 2

26 May 2003

4730-14-488-1657
Fluid Flow Restrictor

144881657
212572-0: RNCC: 3 | RNVC: 2
NR201500067: RNCC: 5 | RNVC: 2

18 Apr 1997

4730-14-216-0302
Tube Tee

142160302
5-3901S32A: RNCC: 3 | RNVC: 2
300201-32A: RNCC: 5 | RNVC: 9
5-3901S32: RNCC: 5 | RNVC: 9
5-3901S32A: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-559-1230
Tube Elbow

145591230
82317401: RNCC: 3 | RNVC: 2
7A16CL10NU: RNCC: 5 | RNVC: 9

9 Dec 2008

4730-14-256-9341
Pipe Flange

142569341
RUHB1-6: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-387-8909
Fluid Passage Bolt

143878909
P430B16: RNCC: 3 | RNVC: 2
730.B.16: RNCC: 3 | RNVC: 2
74730B16: RNCC: 5 | RNVC: 2
74730B16: RNCC: 5 | RNVC: 2
730B16: RNCC: 5 | RNVC: 2
164806: RNCC: 5 | RNVC: 2
730 B 16: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-361-2646
Fluid Pressure Line Multiple Connector

143612646
U15377-29: RNCC: 3 | RNVC: 2

24 Jan 1980

4730-14-376-0437
Pipe Flange

143760437
366A32-1087-20: RNCC: 3 | RNVC: 2

7 Mar 1996

4730-14-398-5876
Tube Tee

143985876
GSM164-054F10: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-500-6433
Tube Tee

145006433
EVT08-S0MDKA3C: RNCC: 3 | RNVC: 2
EVT08S0MDKA3C: RNCC: 5 | RNVC: 2
F300 0T 024 6619: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-294-5370
Pipe Flange

142945370
160-71085-02: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-414-1456
Support Flexible

144141456
NO PRIMARY REF14-414-1456: RNCC: 3 | RNVC: 2
0329-1302-330-31: RNCC: 5 | RNVC: 9

22 Jan 1987

4730-14-374-1271
Quick Disconnect Coupling Assembly

143741271
FA1R723-22: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-401-0232
Tube Fitting Brazing Ferrule

144010232
18310667: RNCC: 3 | RNVC: 2
183-106-67: RNCC: 5 | RNVC: 2

21 May 1985

4730-14-341-6582
Tube Tee

143416582
17-20NU: RNCC: 3 | RNVC: 2
TA20NNU: RNCC: 3 | RNVC: 2
10A20NU: RNCC: 3 | RNVC: 2
P4-17-20NU: RNCC: 5 | RNVC: 2
121135NU: RNCC: 5 | RNVC: 2

14 Apr 1977

4730-14-465-5249
Fluid Flow Restrictor

144655249
A64-71140: RNCC: 3 | RNVC: 2

30 Sep 1993

4730-14-256-1863
Sediment Strainer Element

142561863
NO PRIMARY REF14-256-1863: RNCC: 3 | RNVC: 2
107265: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-457-7621
Quick Disconnect Coupling Half

144577621
69242004: RNCC: 3 | RNVC: 2
9560159130: RNCC: 5 | RNVC: 2
69242004: RNCC: 5 | RNVC: 9
85-694-4173: RNCC: 6 | RNVC: 9

17 Sep 1992

4730-14-392-7844
Hose To Boss Straight Adapter

143927844
6100-20-03: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-422-2699
Flange To Hose Straight Adapter

144222699
930085-223-02: RNCC: 3 | RNVC: 2

24 Feb 1988

4730-14-546-0416
Pipe Flange

145460416
K50-59-801: RNCC: 3 | RNVC: 2

7 Jun 2005

4730-14-504-5893
Tube To Gas Fitting Straight Adapter

145045893
721-910-206: RNCC: 3 | RNVC: 2
CAE00987: RNCC: 5 | RNVC: 2

25 Feb 1998

4730-14-296-9222
Fluid Pressure Line Multiple Connector

142969222
73-063-28: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-484-1144
Tube To Boss Straight Adapter

144841144
4R16-16.1500R: RNCC: 3 | RNVC: 2
1004484304: RNCC: 5 | RNVC: 2
91103601: RNCC: 5 | RNVC: 2
5005430218: RNCC: 5 | RNVC: 2

24 Oct 1996

4730-14-495-6624
Tube To Boss Straight Adapter

144956624
T51375-04: RNCC: 3 | RNVC: 2
F300 0T 019 5946: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-375-9637
Pipe Flange

143759637
NO PRIMARY REF14-375-9637: RNCC: 3 | RNVC: 2
404113945: RNCC: 5 | RNVC: 2
404113945: RNCC: 5 | RNVC: 9

30 Mar 1982

4730-14-564-2590
Hose Clamp

145642590
GBS M 31-34/18 SK W5: RNCC: 3 | RNVC: 2
A210606000067: RNCC: 5 | RNVC: 2

19 Apr 2010

4730-14-233-2453
Raccord Special

142332453
R4A751-11-810: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-218-1090
Mamelon Special

142181090
M3C521-50-815: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-565-2647
Filler Cap Adapter Assembly

145652647
36-0000-1462-01: RNCC: 3 | RNVC: 2
91906707: RNCC: 5 | RNVC: 2

3 Aug 2010

4730-14-423-4440
Pipe Flange

144234440
UA50088006PN420-11D1DN25: RNCC: 2 | RNVC: 2
4730HCPN420DN02511D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-278-3120
Tube To Boss Straight Adapter

142783120
10 4-6XG1-4GAZCY: RNCC: 3 | RNVC: 2
10 4-6XG1-4GAZCY: RNCC: 3 | RNVC: 2

1 Jan 1971

Load More Results