What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 147 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 147 of 185

4730-14-378-6505
Tube To Boss Straight Adapter

143786505
4730AJ4.4DN25EQUIPE: RNCC: 2 | RNVC: 2
8405252766: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-454-6085
Tube To Boss Straight Adapter

144546085
149231: RNCC: 3 | RNVC: 2
LV035-NS1620S: RNCC: 3 | RNVC: 2
UMFA26.34X33.42SL: RNCC: 5 | RNVC: 2

8 Apr 1992

4730-14-533-4824
Tube To Boss Straight Adapter

145334824
9959047: RNCC: 3 | RNVC: 2

5 Feb 2003

4730-14-524-8788
Fluid Flow Restrictor

145248788
434467: RNCC: 3 | RNVC: 9

25 Apr 2001

4730-14-436-6020
Bulkhead Hose Connector

144366020
DA2C205505510: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-040-3746
Raccord Equipe

140403746
M3D711-36M1: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-423-4563
Pipe Flange

144234563
UA50088006PN150-11B2SDN50: RNCC: 2 | RNVC: 2
4730HCPN150DN05011B2S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-453-9501
Tube To Hose Straight Adapter

144539501
LN324-100-11-075DN20: RNCC: 3 | RNVC: 2
RAB9336: RNCC: 5 | RNVC: 2

17 Mar 1992

4730-14-570-1871
Fluid Pressure Line Multiple Connector

145701871
NO PRIMARY REF 14-570-1871: RNCC: 3 | RNVC: 2
EB 6-14: RNCC: 5 | RNVC: 9
FS0003770: RNCC: 6 | RNVC: 9

25 Nov 2011

4730-14-294-3947
Bulkhead Hose Connector

142943947
121A77-200-01-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-372-3903
Self-Sealing Coupling Half

143723903
5602-4-4S: RNCC: 3 | RNVC: 2
476740V: RNCC: 5 | RNVC: 2

1 Sep 1981

4730-14-338-0833
Tube Coupling

143380833
0-3751S63A: RNCC: 3 | RNVC: 2
0-3751S63A: RNCC: 5 | RNVC: 9
85-688-9413: RNCC: 6 | RNVC: 9

6 Nov 1976

4730-14-370-2404
Tube Tee

143702404
303-062-401-0: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-262-1723
Pipe Flange

142621723
7062DL1F1F30-3-5-14CD2-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-546-3308
Bulkhead Hose Connector

145463308
893 184 677 4: RNCC: 3 | RNVC: 2

27 Jun 2005

4730-14-553-7355
Tube To Boss Straight Adapter

145537355
3175 06 17: RNCC: 3 | RNVC: 2
106159/2: RNCC: 5 | RNVC: 2
0930930026128: RNCC: 5 | RNVC: 9

16 May 2007

4730-14-509-6630
Tube Coupling Nut Ring

145096630
786 C 08: RNCC: 3 | RNVC: 2
74786C08: RNCC: 5 | RNVC: 2
786C08: RNCC: 5 | RNVC: 2

28 Oct 1998

4730-14-534-8847
Self-Sealing Coupling Assembly

145348847
02000099: RNCC: 3 | RNVC: 2

11 Apr 2003

4730-14-527-2636
Tube To Boss Straight Adapter

145272636
30212: RNCC: 3 | RNVC: 2

17 Oct 2001

4730-14-571-7355
Quick Disconnect Wye

145717355
RBE 06.8103 0: RNCC: 3 | RNVC: 2

26 Apr 2012

4730-14-361-4455

4730-14-258-3568

4730-14-280-6430

4730-14-572-6380
Valve Service Box

145726380
C24266-1: RNCC: 3 | RNVC: 2

18 Jul 2012

4730-14-260-9188
Pipe Flange

142609188
7062CD1F1F41-5AF42-2: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-339-9012
Tube Coupling Assembly

143399012
0-3951P32X40X32A: RNCC: 3 | RNVC: 2
0-3951P32X40X32A: RNCC: 5 | RNVC: 9
85-688-9433: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-14-376-5618
Tube Tee

143765618
770132211: RNCC: 3 | RNVC: 2
770 132 211: RNCC: 5 | RNVC: 2
E29801E2L: RNCC: 5 | RNVC: 9
132-3: RNCC: 5 | RNVC: 9
132-80: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-299-1746
Fluid Pressure Line Multiple Connector

142991746
121E77-317-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-386-0272
Tube Fitting Clinch Sleeve

143860272
9949957: RNCC: 3 | RNVC: 2
6026011: RNCC: 5 | RNVC: 9
32570: RNCC: 5 | RNVC: 9
A-17732-02: RNCC: 5 | RNVC: 9

24 Aug 1983

4730-14-260-9350
Pipe Flange

142609350
7062DE1F1F171-4-5XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-331-6603
Quick Disconnect Coupling Half

143316603
E29572C65DE: RNCC: 2 | RNVC: 2
4066: RNCC: 3 | RNVC: 2
1022540: RNCC: 3 | RNVC: 2
120-65-70-66-76APM: RNCC: 5 | RNVC: 9
35-120-65: RNCC: 5 | RNVC: 9
3501206676: RNCC: 5 | RNVC: 9
4768: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-458-5884
Quick Disconnect Coupling Half

144585884
N004-106-88: RNCC: 3 | RNVC: 2
N00410688: RNCC: 5 | RNVC: 2
91632726: RNCC: 5 | RNVC: 2

27 Oct 1992

4730-14-489-2581
Pipe Flange

144892581
SIP57GV-STBR1-F10A/MALE: RNCC: 3 | RNVC: 2
SIP57GV-STBR1A/BRIDE MALE: RNCC: 5 | RNVC: 2

9 Jul 1997

4730-14-289-9611
Embout A Braser

142899611
16864-1: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-243-5785
Bouchon

142435785
2-91504: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-446-1401
Tube Coupling

144461401
1776B906: RNCC: 3 | RNVC: 2
89467732: RNCC: 5 | RNVC: 2

6 Mar 1991

4730-14-429-0302
Fluid Pressure Line Multiple Connector

144290302
0000302920: RNCC: 3 | RNVC: 2

4 Jan 1989

4730-14-516-2707
Fluid Pressure Line Multiple Connector

145162707
TA5092G001: RNCC: 3 | RNVC: 2

15 Sep 1999

4730-14-407-6869
Sediment Strainer Body

144076869
FT458REP11: RNCC: 3 | RNVC: 2

27 Feb 1986

4730-14-547-1704
Tube Tee

145471704
93401611: RNCC: 3 | RNVC: 2
5005630077: RNCC: 5 | RNVC: 2

30 Sep 2005

4730-14-382-8705
Tube To Boss Straight Adapter

143828705
PE60807H06: RNCC: 3 | RNVC: 2

26 Jul 2000

4730-14-405-4415
Tube Repair Plug

144054415
X10: RNCC: 3 | RNVC: 2

27 Nov 1985

4730-14-546-2773
Flexible Tube Coupling Assembly

145462773
1705209176: RNCC: 3 | RNVC: 2

22 Jun 2005

4730-14-479-9323
Tube Coupling

144799323
451111: RNCC: 3 | RNVC: 2

14 Feb 1996

4730-14-212-5387
Fluid Pressure Line Multiple Connector

142125387
41715: RNCC: 3 | RNVC: 2
0024315112: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-353-8951

4730-14-453-8856
Tube Tee

144538856
R1020Z18: RNCC: 3 | RNVC: 2
924570: RNCC: 5 | RNVC: 2
89472347: RNCC: 5 | RNVC: 2

12 Mar 1992

4730-14-431-9632
Tube To Boss Straight Adapter

144319632
1142334000: RNCC: 3 | RNVC: 2
91675448: RNCC: 5 | RNVC: 2
DAH1142334000: RNCC: 5 | RNVC: 9

18 May 1989

4730-14-463-1800
Bulkhead Hose Connector

144631800
XSV22PL: RNCC: 3 | RNVC: 2
XSV22PL: RNCC: 5 | RNVC: 2

26 May 1993

4730-14-316-9574

4730-14-344-5148

4730-14-253-7890

4730-14-560-0867
Branched Tubing Connector

145600867
15871: RNCC: 3 | RNVC: 2
29391: RNCC: 5 | RNVC: 2

23 Mar 2009

4730-14-356-0728

4730-14-412-3394
Bloc Sertissage

144123394
PS27X30: RNCC: 3 | RNVC: 2

8 Oct 1986

4730-14-343-7984

4730-14-484-0422
Hose To Boss Straight Adapter

144840422
6504864X: RNCC: 3 | RNVC: 9
89303272: RNCC: 5 | RNVC: 2
6504864X: RNCC: 5 | RNVC: 9

17 Oct 1996

4730-14-495-7809
Tube To Boss Straight Adapter

144957809
307022028030A: RNCC: 3 | RNVC: 9
F300 0T 020 0684: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-423-7085
Tube Fitting Clinch Sleeve

144237085
D14S: RNCC: 3 | RNVC: 2
107056: RNCC: 5 | RNVC: 2

28 Apr 1988

4730-14-203-6479
Raccord Vabco

142036479
UL10: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-465-7055
Tube Union

144657055
191133-2: RNCC: 3 | RNVC: 2
191133-2: RNCC: 5 | RNVC: 2

8 Oct 1993

4730-14-516-9905
Bulkhead Hose Connector

145169905
CRB201710130B1: RNCC: 3 | RNVC: 2

28 Oct 1999

4730-14-264-6791

4730-14-309-3961

4730-14-556-2200
Drain Extension Tube

145562200
24812U: RNCC: 3 | RNVC: 9

12 Feb 2008

4730-14-290-1714

4730-14-295-3060
Bride Et Tube

142953060
172800: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-252-2601
Tube Coupling

142522601
ESQ1-52-41TF: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-231-7499
Fluid Passage Bolt

142317499
NO PRIMARY REF14-231-7499: RNCC: 3 | RNVC: 2
21-201-11-40: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-495-1723
Union Male

144951723
NO PRIMARY REF14-495-1723: RNCC: 3 | RNVC: 2
CH258002: RNCC: 5 | RNVC: 9
F300 0T 018 6103: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-377-9026
Bride Raccordement

143779026
GSM162-007F25: RNCC: 3 | RNVC: 2

10 Jun 1982

4730-14-457-8027
Pipe Flange

144578027
4730JADN100-11D1S: RNCC: 2 | RNVC: 2

24 Sep 1992

4730-14-486-2810
Tube Fitting Socket Welded Ferrule

144862810
CSG-250-3000-BWI-2INCH-INOX316L: RNCC: 3 | RNVC: 2

10 Mar 1997

4730-14-387-5721
Tube Fitting Brazing Ferrule

143875721
NO PRIMARY REF14-387-5721: RNCC: 3 | RNVC: 2
D02807: RNCC: 5 | RNVC: 2
D2807: RNCC: 5 | RNVC: 2
ZM2JZ12: RNCC: 5 | RNVC: 9

15 Sep 1983

4730-14-492-6703
Tube To Boss Straight Adapter

144926703
NO PRIMARY REF14-492-6703: RNCC: 3 | RNVC: 2
89452: RNCC: 5 | RNVC: 9
F300 0T 008 4695: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-212-1209
Pipe Flange

142121209
BN320-576-25F2-10: RNCC: 3 | RNVC: 2

5 Jul 1980

4730-14-428-9371
Lubricating Oil Cup

144289371
790-230: RNCC: 3 | RNVC: 2

28 Dec 1988

4730-14-242-7474
Tube Tee

142427474
NG410-40PL6: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-397-1467
A Derivatio Raccord

143971467
366A54-1017-01: RNCC: 3 | RNVC: 2

1 Dec 1984

4730-14-564-0404
Sediment Strainer

145640404
G0210014: RNCC: 3 | RNVC: 2
020 254 05: RNCC: 5 | RNVC: 1
191612296-01: RNCC: 5 | RNVC: 2

6 Apr 2010

4730-14-518-9382
Tube Union

145189382
F4BPB6-1-8: RNCC: 3 | RNVC: 2

29 Feb 2000

4730-14-446-5834
Tube To Boss Straight Adapter

144465834
EGE25SREDA3C: RNCC: 3 | RNVC: 2
EGE25SREDA3C: RNCC: 3 | RNVC: 9
EVGE25PSRED: RNCC: 5 | RNVC: 9

28 Mar 1991

4730-14-576-7817
Tube To Boss Straight Adapter

145767817
2432 G13 710 S: RNCC: 3 | RNVC: 2

12 Jul 2013

4730-14-560-0286
Quick Disconnect Coupling Half

145600286
MPX19.1105/JV: RNCC: 3 | RNVC: 2

16 Mar 2009

4730-14-392-2348
Tube Union

143922348
NO PRIMARY REF14-392-2348: RNCC: 3 | RNVC: 2
372537: RNCC: 5 | RNVC: 9

21 Mar 1984

4730-14-263-2511
Bride De Moteur

142632511
DF21504B: RNCC: 3 | RNVC: 9

1 Jan 1970

4730-14-423-4730
Pipe Flange

144234730
UA50088006PN50-11LSFDN32: RNCC: 2 | RNVC: 2
4730HCPN50DN03211LSF: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-312-7577
Tube To Boss Straight Adapter

143127577
GSM164-040F8: RNCC: 3 | RNVC: 2
411MA792REP1: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-398-5941
Tube Fitting Brazing Ferrule

143985941
4730AMF3PN250DE36: RNCC: 2 | RNVC: 2
GSM164-057F6Z0NEA: RNCC: 3 | RNVC: 2
MAT164-0354F6ZONEA: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-357-0597
Tube To Boss Straight Adapter

143570597
82231-1: RNCC: 3 | RNVC: 2
82231-1: RNCC: 5 | RNVC: 2

7 Jun 1979

4730-14-480-1481
Obturateur A Bride

144801481
K15721PH049AF38/0: RNCC: 3 | RNVC: 2

21 Feb 1996

4730-14-450-2615
Bulkhead Hose Connector

144502615
PM1A241511201: RNCC: 3 | RNVC: 2
PM1A241511201: RNCC: 5 | RNVC: 2

25 Sep 1991

4730-14-534-8608
Bulkhead Hose Connector

145348608
10669786000: RNCC: 3 | RNVC: 2

9 Apr 2003

4730-14-391-2996
Tube Tee

143912996
10S6MXS: RNCC: 3 | RNVC: 2
S6XS16: RNCC: 5 | RNVC: 2
S6XS16: RNCC: 5 | RNVC: 2
91713580: RNCC: 5 | RNVC: 2

1 Mar 1984

4730-14-496-0965
Tube To Boss Straight Adapter

144960965
008373-23J: RNCC: 3 | RNVC: 2
F300 0T 020 8938: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-366-5869

4730-14-335-7108

4730-14-270-5027

4730-14-240-6409
Embout Tube Ensembl

142406409
1121BS: RNCC: 3 | RNVC: 9
1121B: RNCC: 5 | RNVC: 9
1000950P: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-205-0420

4730-14-373-1703
Quick Disconnect Coupling Half

143731703
N01116274: RNCC: 3 | RNVC: 2
N011162-74: RNCC: 5 | RNVC: 2

21 Oct 1981

4730-14-382-8716
Tube To Boss Straight Adapter

143828716
PE60801H08: RNCC: 3 | RNVC: 2

26 Jul 2000

4730-14-552-9602
Fluid Passage Bolt

145529602
712472: RNCC: 3 | RNVC: 2

19 Feb 2007

4730-14-434-6967
Adaptateur Bride

144346967
BN329515C2DN20INOX: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-532-5551
Fluid Pressure Line Multiple Connector

145325551
496528M: RNCC: 3 | RNVC: 2

13 Nov 2002

4730-14-549-7680
Flange To Boss Straight Adapter

145497680
S521A1051275: RNCC: 3 | RNVC: 2

10 May 2006

4730-14-452-5598
Pipe Flange

144525598
LN320033F27DN32EXT38: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-224-6324
Quick Disconnect Coupling Half

142246324
E29572A50BZ: RNCC: 2 | RNVC: 2

1 Jan 1966

4730-14-365-9235

4730-14-571-0785
Pipe To Hose Tee

145710785
1WA50060: RNCC: 3 | RNVC: 2

16 Feb 2012

4730-14-344-1059

4730-14-512-8088
Tube Union

145128088
191197: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-365-9569

4730-14-570-6130
Union Nut

145706130
BRIDE10973A00: RNCC: 3 | RNVC: 2

11 Jan 2012

4730-14-273-5060
Tube Coupling

142735060
7062BA1RPET1-8UE10Z1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-282-2431
Tube To Boss Straight Adapter

142822431
R5810Z5: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-371-2969
Fluid Passage Bolt

143712969
0033626037: RNCC: 3 | RNVC: 2
0033626037: RNCC: 5 | RNVC: 9
33626037: RNCC: 5 | RNVC: 9

5 Aug 1981

4730-14-457-8034
Pipe Flange

144578034
4730JADN400-11D1S: RNCC: 2 | RNVC: 2

24 Sep 1992

4730-14-394-7278
Raccord Gonfleur

143947278
E64-35-3280-113F82REP5: RNCC: 3 | RNVC: 2

28 Aug 1984

4730-14-211-2357
Raccord Droit De Bo

142112357
NO PRIMARY REF14-211-2357: RNCC: 3 | RNVC: 2
4300134201: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-031-6469
Tube To Boss Straight Adapter

140316469
Q1-5GAI20SM27X200EQUIPE: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-398-5874
Tube Tee

143985874
GSM164-054F8: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-325-4867
Sediment Strainer Element

143254867
C11BA0101-039: RNCC: 3 | RNVC: 2
C11BA0101-039: RNCC: 5 | RNVC: 2
C11BA0101-039: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-501-9412
Flexible Tube Coupling Assembly

145019412
332A52-1238-00: RNCC: 3 | RNVC: 2

19 Nov 1997

4730-14-325-6818
Equ A Bride Raccord

143256818
0000367130: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-475-6376
Plaque A Clapet

144756376
PNV251000344: RNCC: 3 | RNVC: 2

24 Apr 1995

4730-14-234-9748
Embout De Raccordem

142349748
M3B794-009M1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-432-4692
Pipe Flange

144324692
BN329-506C2DN250: RNCC: 3 | RNVC: 2

14 Jun 1989

4730-14-281-5068
Tube To Gas Fitting Straight Adapter

142815068
993N3572: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-512-8043
Tube Coupling

145128043
180314: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-518-5119
Tube To Boss Straight Adapter

145185119
HRAXX000062: RNCC: 3 | RNVC: 9

9 Feb 2000

4730-14-515-4416
Tube To Boss Straight Adapter

145154416
MJ12M18BSPT: RNCC: 3 | RNVC: 2
SOAMJ12M18BSPT: RNCC: 5 | RNVC: 9

13 Jul 1999

4730-14-512-5869
Fluid Pressure Line Multiple Connector

145125869
102333: RNCC: 3 | RNVC: 2

17 Feb 1999

4730-14-543-9153
Fluid Passage Bolt

145439153
970300327: RNCC: 3 | RNVC: 2

15 Dec 2004

4730-14-529-4222
Tube To Boss Straight Adapter

145294222
6501CCH418: RNCC: 3 | RNVC: 2

29 Mar 2002

4730-14-434-7211
Pipe Joint Welding Ring

144347211
BN329514BN250INOX: RNCC: 3 | RNVC: 2

3 Oct 1989

4730-14-453-8852
Tube Tee

144538852
R1016Z14: RNCC: 3 | RNVC: 2
924566: RNCC: 5 | RNVC: 2
89472351: RNCC: 5 | RNVC: 2

12 Mar 1992

4730-14-353-5951
Fluid Pressure Line Multiple Connector

143535951
FDDA28M: RNCC: 3 | RNVC: 2
804862Z: RNCC: 5 | RNVC: 2

16 Jan 1979

4730-14-489-8499
Pipeline Flexible Spacer

144898499
431662060I: RNCC: 3 | RNVC: 2
FIG662DN50: RNCC: 5 | RNVC: 2

26 Aug 1997

4730-14-397-0288
Bulkhead Hose Connector

143970288
01170013: RNCC: 3 | RNVC: 2
037564P: RNCC: 5 | RNVC: 2
91343020: RNCC: 5 | RNVC: 2

1 Dec 1984

4730-14-526-4673
Tube Coupling

145264673
RA1M721612: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-552-7354
Fluid Pressure Line Multiple Connector

145527354
0029495: RNCC: 3 | RNVC: 2

26 Jan 2007

4730-14-536-1506
Bulkhead Hose Connector

145361506
4518-5118: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-544-7227
Quick-Disconnect Nipple

145447227
IRP066806: RNCC: 3 | RNVC: 2
AA012324: RNCC: 6 | RNVC: 9

18 Feb 2005

4730-14-549-7838
Tube Tee

145497838
93465500: RNCC: 3 | RNVC: 2
5010631425: RNCC: 5 | RNVC: 2

11 May 2006

4730-14-498-9675
Pipe To Tube Straight Adapter

144989675
5000293415: RNCC: 3 | RNVC: 2
F00078209: RNCC: 3 | RNVC: 2
F00078209: RNCC: 5 | RNVC: 9
F300 0T 014 1405: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-406-8062
Tube Fitting Clinch Sleeve

144068062
87241800: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-459-5053
Fluid Passage Bolt

144595053
77720250H: RNCC: 3 | RNVC: 2

9 Dec 1992

4730-14-492-1474
Tube To Boss Straight Adapter

144921474
0000145763: RNCC: 3 | RNVC: 2
F300 0T 007 0690: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-216-7947
Fluid Passage Bolt

142167947
20281: RNCC: 3 | RNVC: 9

1 Jan 1965

4730-14-392-9359
Tube Coupling

143929359
0024248642: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-212-3525
Tube Coupling

142123525
3751S50A: RNCC: 3 | RNVC: 2
A1345: RNCC: 3 | RNVC: 2
A1345: RNCC: 5 | RNVC: 2
3751K50A: RNCC: 5 | RNVC: 9
3751S50A: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-378-9348
Tube-Hose Fitting Compression Sleeve

143789348
P109371D: RNCC: 3 | RNVC: 2

6 Sep 1982

4730-14-040-6435
Support Raccord

140406435
1310-4-242: RNCC: 3 | RNVC: 2
1310-4-242: RNCC: 5 | RNVC: 2
1310-4-242: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-538-9855
Quick Disconnect Reducer

145389855
NGM0054640926441: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-237-5439
Flexible Tube Coupling Assembly

142375439
L40F2: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-386-9953
Tube To Boss Straight Adapter

143869953
F4BRAB8-1/8: RNCC: 3 | RNVC: 2
F4BRAB8-1/8: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-240-5836
Tube To Boss Straight Adapter

142405836
52-10-12-17CYL: RNCC: 3 | RNVC: 2
UML10X12-17N: RNCC: 3 | RNVC: 2
4L10-12-17CYL: RNCC: 3 | RNVC: 2
ML10-17: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-493-2006
Fluid Pressure Line Multiple Connector

144932006
NO PRIMARY REF14-493-2006: RNCC: 3 | RNVC: 2
0MA10-16X150NCV8NE: RNCC: 5 | RNVC: 9
F300 0T 011 2911: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-399-1325
Hose To Gas Fitting Straight Adapter

143991325
01230610: RNCC: 3 | RNVC: 2
427100: RNCC: 5 | RNVC: 2
1230610: RNCC: 5 | RNVC: 2
252-0348: RNCC: 5 | RNVC: 2

6 Mar 1985

4730-14-273-5038
Tube To Boss Straight Adapter

142735038
7062BA1RCET2-10C337A: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-330-6532
Pipe Flange

143306532
BN347-502-108: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-333-0982

4730-14-203-9106

4730-14-532-8764

4730-14-559-5337
Hose Clamp

145595337
CO257270: RNCC: 3 | RNVC: 2

21 Jan 2009

4730-14-268-5101

4730-14-532-4660
Tube Union

145324660
DLT0239092: RNCC: 3 | RNVC: 2

5 Nov 2002

4730-14-547-5593
Tube Coupling

145475593
RA1B504250100: RNCC: 3 | RNVC: 2

15 Oct 2005

4730-14-400-9521
Bulkhead Hose Connector

144009521
DA2C204503911U2: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-495-7794
Tube To Boss Straight Adapter

144957794
307022028015A: RNCC: 3 | RNVC: 9
F300 0T 020 0669: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-338-7168
Fluid Passage Bolt

143387168
193904: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-224-3834
Fluid Passage Bolt

142243834
41819: RNCC: 3 | RNVC: 2
LB41819: RNCC: 5 | RNVC: 2
0024316119: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-525-1865
Return Tube Bend

145251865
14230700C: RNCC: 3 | RNVC: 2
06310P114014: RNCC: 3 | RNVC: 2

23 May 2001

4730-14-424-3901
Fluid Pressure Line Multiple Connector

144243901
16766895: RNCC: 3 | RNVC: 2

19 May 1988

4730-14-213-1042
Tube Coupling Nut Assembly

142131042
9971060009: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-482-6008
Tube Coupling

144826008
A88468: RNCC: 3 | RNVC: 2

18 Jul 1996

4730-14-434-6576
Pipe Flange

144346576
1056-DN 80: RNCC: 3 | RNVC: 9

27 Sep 1989

4730-14-311-3628
Tube To Boss Straight Adapter

143113628
188584: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-570-8929
Hose Elbow

145708929
COUDE00042: RNCC: 3 | RNVC: 2

1 Feb 2012

4730-14-365-3410

4730-14-365-3441

4730-14-349-5939
Tube Tee

143495939
721-200-147: RNCC: 3 | RNVC: 2
21-20-01-40-32-40: RNCC: 5 | RNVC: 2

22 May 1978

4730-14-312-6527

4730-14-258-8371
Fluid Pressure Line Multiple Connector

142588371
109-12NU: RNCC: 3 | RNVC: 2
P4-109-12NU: RNCC: 5 | RNVC: 2
EMDAS05442: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-352-4896

4730-14-241-2599
Raccord Droit Ensem

142412599
518005: RNCC: 3 | RNVC: 2
35372: RNCC: 5 | RNVC: 2
DBA518005: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-235-1765

4730-14-367-7434

4730-14-311-7820
Tube Union

143117820
340CU12: RNCC: 3 | RNVC: 2
340CU12: RNCC: 5 | RNVC: 9
340CU12: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-504-7066
Tube To Boss Straight Adapter

145047066
5001833877: RNCC: 3 | RNVC: 2
447718H: RNCC: 3 | RNVC: 2

27 Feb 1998

4730-14-299-9711
Tube To Boss Straight Adapter

142999711
13-201-57: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-456-6544
Tube Fitting Clinch Sleeve

144566544
DK10S: RNCC: 3 | RNVC: 2

17 Jul 1992

4730-14-262-2902

4730-14-278-0942

4730-14-472-9185
Tube Tee

144729185
4730GD0267: RNCC: 2 | RNVC: 2
4730GD-DE267: RNCC: 3 | RNVC: 2
BN524-554F4-267: RNCC: 3 | RNVC: 2

16 Nov 1994

4730-14-236-1328
Fluid Passage Bolt

142361328
160-61477-10: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-296-3274
Bulkhead Hose Connector

142963274
F764-18: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-560-3298
Hose Clamp

145603298
268-1540: RNCC: 3 | RNVC: 2
U3436954: RNCC: 5 | RNVC: 2
CV149962: RNCC: 5 | RNVC: 2
U3436954: RNCC: 5 | RNVC: 2

9 Apr 2009

4730-14-424-6482
Tube To Hose Straight Adapter

144246482
LV117-CS0802LL: RNCC: 3 | RNVC: 2
UMCA8X5-10LL: RNCC: 5 | RNVC: 2
461-176: RNCC: 5 | RNVC: 2
461176: RNCC: 5 | RNVC: 2

2 Jun 1988

4730-14-242-4528
Tube To Boss Straight Adapter

142424528
HS301: RNCC: 3 | RNVC: 2
1081-4-44: RNCC: 5 | RNVC: 2
1081-4-44: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-332-0669
Bulkhead Hose Connector

143320669
R5812Z50: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-040-2895
Tube To Boss Straight Adapter

140402895
RT11074: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-535-7450
Fluid Passage Bolt

145357450
EN051089: RNCC: 3 | RNVC: 2
8-00056: RNCC: 5 | RNVC: 9

25 Jun 2003

4730-14-375-7099
Tube To Boss Straight Adapter

143757099
8905081466: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-454-2972
Fluid Pressure Line Multiple Connector

144542972
EA5M782-10: RNCC: 3 | RNVC: 2

26 Mar 1992

4730-14-423-4537
Pipe Flange

144234537
UA50088006PN100-11D1SDN100: RNCC: 2 | RNVC: 2
4730HCPN100DN10011D1S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-275-6966
Lubrication Fitting

142756966
9212022: RNCC: 3 | RNVC: 2
G59-08-125: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-419-3952
Tube Coupling

144193952
6E5-13132-00: RNCC: 3 | RNVC: 2

16 Oct 1987

4730-14-250-2129
Plain Solid Disk

142502129
M11-2PL1REPH: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-448-8154
Tube To Gas Fitting Straight Adapter

144488154
LL116-CS2516S: RNCC: 3 | RNVC: 2

10 Jul 1991

4730-14-547-5395
Tube-Hose Fitting Compression Sleeve

145475395
480080S100-02A: RNCC: 3 | RNVC: 2

15 Oct 2005

4730-14-495-3835
Tube To Boss Straight Adapter

144953835
P3237532G: RNCC: 3 | RNVC: 2
G32375-32: RNCC: 5 | RNVC: 2
F300 0T 019 1747: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-377-9032
Tube Fitting Brazing Ferrule

143779032
GSM164-023F15: RNCC: 3 | RNVC: 2
MAT164-0355F15: RNCC: 3 | RNVC: 2

10 Jun 1982

4730-14-238-6795
Pipe Flange

142386795
B0044BB51APL2-2REP34: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-325-8868
Pipe Flange

143258868
7066CB1-25UA9: RNCC: 2 | RNVC: 2

2 Jul 1975

4730-14-213-8249
Flexible Tube Coupling Assembly

142138249
E40.F.3: RNCC: 3 | RNVC: 2
E40F3: RNCC: 5 | RNVC: 2
E40F3: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-234-0550

4730-14-241-9216
Tetine A Embase Six

142419216
D3-8: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-504-9044
Pipeline Flexible Spacer

145049044
DILATOFLEX-K-GZ-DN100PN16-CERCLE: RNCC: 3 | RNVC: 2
GR1/100/KR320-WG/P/ANNEAU VIDE: RNCC: 3 | RNVC: 2
ERV-JAUNE-DN100PN16-VSD: RNCC: 3 | RNVC: 9

11 Mar 1998

4730-14-307-5141
Self-Sealing Coupling Half

143075141
9949211: RNCC: 3 | RNVC: 2
9949211: RNCC: 3 | RNVC: 9
TAHM157S4-712-5D: RNCC: 5 | RNVC: 9
9-94-92-11: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-338-8692
Tube To Boss Straight Adapter

143388692
NO PRIMARY REF14-338-8692: RNCC: 3 | RNVC: 2
3877-3: RNCC: 5 | RNVC: 9

17 Dec 1976

4730-14-505-3618
Fluid Pressure Line Multiple Connector

145053618
WH18-PLM-KD-0MD: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-494-6983
Tube To Boss Straight Adapter

144946983
NO PRIMARY REF14-494-6983: RNCC: 3 | RNVC: 2
0171106: RNCC: 5 | RNVC: 9
F300 0T 017 7974: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-238-5154
Sediment Strainer Element

142385154
250-50DIA13-5CQ: RNCC: 3 | RNVC: 2
250-50DIA13M5IN0X: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-334-2527
Tube Tee

143342527
GSM163-017F25: RNCC: 3 | RNVC: 2
GSM163-17F25: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-371-2589
Tube To Boss Straight Adapter

143712589
11186: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-369-2291
Fluid Pressure Line Multiple Connector

143692291
S3910CD: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-040-6759
Tube Coupling Assembly

140406759
3951R25X32X25A: RNCC: 3 | RNVC: 2
3951R25X32X25A: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-369-4500
Sediment Strainer Element

143694500
M593295D: RNCC: 3 | RNVC: 9

17 Apr 1981

4730-14-399-0363
Tube To Boss Straight Adapter

143990363
7237800008: RNCC: 3 | RNVC: 2
72378000: RNCC: 5 | RNVC: 2

6 Mar 1985

4730-14-386-9992
Tube Tee

143869992
01042200: RNCC: 3 | RNVC: 2
1042200: RNCC: 5 | RNVC: 2

24 Aug 1983

4730-14-359-6092
Bulkhead Hose Connector

143596092
106-28CL20: RNCC: 3 | RNVC: 2
3A28CL20: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-325-8983
Pipe Flange

143258983
AS34TV103REP3: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-306-8997
Fluid Pressure Line Multiple Connector

143068997
0235227410: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-529-9901
Tube To Hose Straight Adapter

145299901
TB2030509: RNCC: 3 | RNVC: 2

24 Apr 2002

4730-14-306-8873
Pipe Flange

143068873
0261160130: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-383-1379
Tube To Boss Straight Adapter

143831379
S3646CD: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-274-3500
Sediment Strainer Element

142743500
A6181: RNCC: 3 | RNVC: 2
30924: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-276-1961

4730-14-469-1664
Raccord Y Sans Brid

144691664
BK15A10051F4B: RNCC: 3 | RNVC: 2
BK15A10051: RNCC: 5 | RNVC: 2

11 Apr 1994

4730-14-453-3270
Raccord Nettoyage

144533270
07081: RNCC: 3 | RNVC: 2

17 Feb 1992

4730-14-386-9916
Tube Union

143869916
PZC-A166: RNCC: 3 | RNVC: 2
PZCA166: RNCC: 5 | RNVC: 2

24 Aug 1983

4730-14-357-5778
Fluid Passage Bolt

143575778
0235230090: RNCC: 3 | RNVC: 2

7 Jun 1979

4730-14-512-0539
Exhaust-Intake Pneumatic Muffler

145120539
0062086: RNCC: 3 | RNVC: 2

3 Feb 1999

4730-14-484-6921
Anchor And Reinforcement Pipe Clamp

144846921
P603700: RNCC: 3 | RNVC: 2

3 Dec 1996

4730-14-362-2560
Fluid Pressure Line Multiple Connector

143622560
A11A522360640: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-383-1872
Fluid Pressure Line Multiple Connector

143831872
MY2051510642G01: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-399-8798
Rapid Action Coupled Pipe Cap

143998798
RBE11-8550: RNCC: 3 | RNVC: 2
R311-855-00: RNCC: 5 | RNVC: 2

11 Apr 1985

4730-14-508-6484
Filler Cap Adapter Assembly

145086484
MAT009-02-00: RNCC: 3 | RNVC: 2

23 Sep 1998

4730-14-479-1795
Tube Fitting Socket Welded Ferrule

144791795
FI 2.12.26.02: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-380-8426
Fluid Pressure Line Multiple Connector

143808426
731.B.10: RNCC: 3 | RNVC: 2
P431B10: RNCC: 3 | RNVC: 2
164843: RNCC: 5 | RNVC: 2
731 B 10: RNCC: 5 | RNVC: 2
731B10: RNCC: 5 | RNVC: 2
74731B10: RNCC: 5 | RNVC: 2
74731B10: RNCC: 5 | RNVC: 2

14 Dec 1982

4730-14-533-2493
Tube To Boss Straight Adapter

145332493
V103471: RNCC: 3 | RNVC: 2

29 Jan 2003

4730-14-311-3325
Fluid Pressure Line Multiple Connector

143113325
214509: RNCC: 3 | RNVC: 9
061214509: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-441-5397
Tube Tee

144415397
PVA40A: RNCC: 3 | RNVC: 2

3 Sep 1990

4730-14-329-2210
Fluid Pressure Line Multiple Connector

143292210
F10A740011001: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-422-7285
Tube To Boss Straight Adapter

144227285
0298561690: RNCC: 3 | RNVC: 2

17 Mar 1988

4730-14-448-8805
Hose To Gas Fitting Straight Adapter

144488805
18231017: RNCC: 3 | RNVC: 2

24 Jul 1991

4730-14-513-8448
Tube To Boss Straight Adapter

145138448
324164: RNCC: 3 | RNVC: 2

14 Apr 1999

4730-14-236-5985
Fluid Passage Bolt

142365985
R208: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-434-2050
Fluid Pressure Line Multiple Connector

144342050
552487: RNCC: 3 | RNVC: 2

12 Sep 1989

4730-14-429-5959
Pipe Flange

144295959
403457: RNCC: 3 | RNVC: 2
403457: RNCC: 3 | RNVC: 2

1 Feb 1989

4730-14-388-5394
Fluid Pressure Line Multiple Connector

143885394
PZCF193: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-499-2064
Tube To Boss Straight Adapter

144992064
999999-076: RNCC: 3 | RNVC: 2
103043004023A: RNCC: 3 | RNVC: 9
F300 0T 019 7725: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-410-9831
Tube Tee

144109831
TMA40-49X38N: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-414-2325
Pipe Flange

144142325
U1240-11D1SPN100DN32Z2CND17-12T3: RNCC: 3 | RNVC: 2

27 Jan 1987

4730-14-320-0259
Tube To Boss Straight Adapter

143200259
RF10: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-270-4746
Sediment Strainer Element

142704746
32416E: RNCC: 3 | RNVC: 9

1 Jan 1970

4730-14-310-8072
Bulkhead Hose Connector

143108072
0000364660: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-506-4425
Tube Coupling Assembly

145064425
3050581080F: RNCC: 3 | RNVC: 2
3050581080: RNCC: 5 | RNVC: 2
CAE01360: RNCC: 5 | RNVC: 2

29 Apr 1998

4730-14-517-8001
Tube-Hose Fitting Compression Sleeve

145178001
720.02.20: RNCC: 3 | RNVC: 2
8020124T00: RNCC: 5 | RNVC: 2

13 Jan 2000

4730-14-213-5826
Tube Coupling Assembly

142135826
3951S50X50X32A: RNCC: 3 | RNVC: 2
3951S50X50X32A: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-260-9252
Pipe Flange

142609252
7062DB1F1F152XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-287-7903
Pipe Flange

142877903
RUAN7625M912P12G: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-522-2099
Fluid Pressure Line Multiple Connector

145222099
RM1018: RNCC: 3 | RNVC: 2

11 Oct 2000

4730-14-325-9014
Pipe Flange

143259014
AS34TV107REP10: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-453-7750
Tube To Boss Straight Adapter

144537750
1UMF10100Z302: RNCC: 3 | RNVC: 2

10 Mar 1992

4730-14-523-6671
Tube To Boss Straight Adapter

145236671
J3237557: RNCC: 3 | RNVC: 2
0174952007: RNCC: 3 | RNVC: 2

31 Jan 2001

4730-14-436-7059
Bulkhead Hose Connector

144367059
DA2C203518511U1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-475-4685
Quick Disconnect Coupling Half

144754685
HA 05041 00: RNCC: 3 | RNVC: 2
HA0504100: RNCC: 5 | RNVC: 2

10 Apr 1995

4730-14-516-8507
Return Tube Bend

145168507
101160611310: RNCC: 3 | RNVC: 2

20 Oct 1999

4730-14-418-2307
Pipe Flange

144182307
16179336: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-534-0516
Hose To Gas Fitting Straight Adapter

145340516
NNM0053175050588: RNCC: 2 | RNVC: 2

12 Mar 2003

4730-14-031-2971
Fluid Pressure Line Multiple Connector

140312971
109-25-26-34: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-409-0828
Tube Tee

144090828
7418143000: RNCC: 3 | RNVC: 2
748122106: RNCC: 5 | RNVC: 2
5156138000: RNCC: 5 | RNVC: 2
HOL7418143000: RNCC: 5 | RNVC: 9
MAF0001006599: RNCC: 6 | RNVC: 9

16 Apr 1986

4730-14-222-3761
Lubrication Fitting

142223761
720: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-417-7755
Tube To Boss Straight Adapter

144177755
Q15GAI14M20150NU: RNCC: 3 | RNVC: 2
8454148066NU: RNCC: 3 | RNVC: 2

22 Jul 1987

4730-14-358-7243
Fourreau De Raccord

143587243
2-20606-50A: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-279-8231

4730-14-205-0413

4730-14-203-6520

4730-14-578-1819
Tube To Boss Elbow

145781819
C64PB6-1/8: RNCC: 3 | RNVC: 2
C64BPB6-1/8: RNCC: 5 | RNVC: 2

7 Nov 2013

4730-14-380-0922
Fluid Pressure Line Multiple Connector

143800922
109-6-10X100TF: RNCC: 3 | RNVC: 2

8 Nov 1982

4730-14-387-4861
Raccord De Moteur

143874861
039-47155-0: RNCC: 3 | RNVC: 2
039-47155-0: RNCC: 3 | RNVC: 9

15 Sep 1983

4730-14-501-2388
Tube To Boss Straight Adapter

145012388
471.396: RNCC: 3 | RNVC: 2
471-396: RNCC: 3 | RNVC: 2
F300 0T 025 2793: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-415-9804
Pipe Coupling Leak Repair Clamp

144159804
901-700-56: RNCC: 3 | RNVC: 2
85-693-3529: RNCC: 6 | RNVC: 9

1 Jun 1987

4730-14-211-6037
Tuyau Du Reservoir

142116037
NO PRIMARY REF14-211-6037: RNCC: 3 | RNVC: 2
E137D170: RNCC: 5 | RNVC: 9
E137D170: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-281-3185

4730-14-344-6044

4730-14-282-2174

4730-14-253-8538
Collet Pour Tuyaute

142538538
24055010300: RNCC: 3 | RNVC: 2
55J103: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-566-0774
Pipe To Hose Straight Adapter

145660774
6540533: RNCC: 3 | RNVC: 2

18 Oct 2010

4730-14-568-6403
Sediment Strainer

145686403
NO PRIMARY REF 14-568-6403: RNCC: 3 | RNVC: 2
7016B-50: RNCC: 5 | RNVC: 2

23 Jun 2011

4730-14-375-9629
Tube To Boss Straight Adapter

143759629
NO PRIMARY REF14-375-9629: RNCC: 3 | RNVC: 2
404113679: RNCC: 5 | RNVC: 9
404113679: RNCC: 5 | RNVC: 9
404113679: RNCC: 5 | RNVC: 9

30 Mar 1982

4730-14-253-3113
Pipe Flange

142533113
GSM167-010F06: RNCC: 3 | RNVC: 2
GSM1633: RNCC: 5 | RNVC: 2
GSM167-10F6: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-500-6740
Tube Tee

145006740
XTR25-16-25-SA3C: RNCC: 3 | RNVC: 2
XTR25-16-25SA3C: RNCC: 3 | RNVC: 2
F300 0T 024 6931: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-358-0914
Fluid Passage Bolt

143580914
702A30-0440-21: RNCC: 3 | RNVC: 2

20 Jul 1979

4730-14-262-3409

4730-14-551-1190
Hose-Tube Flange Lateral

145511190
47176761: RNCC: 3 | RNVC: 2

28 Aug 2006

4730-14-474-9464
Quick Disconnect Coupling Half

144749464
WV0602400: RNCC: 3 | RNVC: 2
RAR1639: RNCC: 5 | RNVC: 2

14 Mar 1995

4730-14-284-5727
Tube To Boss Straight Adapter

142845727
86048: RNCC: 3 | RNVC: 2
9567157830: RNCC: 5 | RNVC: 2
86048: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-422-0783
Tube To Boss Straight Adapter

144220783
GE38SR71: RNCC: 3 | RNVC: 2
GE38SR71: RNCC: 3 | RNVC: 9
GE38PSR1.4571: RNCC: 5 | RNVC: 9
GE38PSR71: RNCC: 5 | RNVC: 9

22 Feb 1988

4730-14-522-6256
Tube To Boss Straight Adapter

145226256
AR003: RNCC: 3 | RNVC: 2
SOAAR003: RNCC: 5 | RNVC: 9

8 Nov 2000

4730-14-503-2068
Tube Coupling

145032068
RP1A504150091: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-408-9063
Fluid Pressure Line Multiple Connector

144089063
157820: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-374-3986
Tube To Boss Straight Adapter

143743986
7745: RNCC: 3 | RNVC: 9

8 Dec 1981

4730-14-260-9224
Pipe Flange

142609224
7062DB1F1M87XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-362-1456
Sediment Strainer Element

143621456
A4826REP3: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-380-9960
Hose Coupling Assembly

143809960
200263: RNCC: 3 | RNVC: 9

14 Dec 1982

4730-14-417-7799
Tube To Boss Straight Adapter

144177799
LV154-NS1408S: RNCC: 3 | RNVC: 2
84541421NU: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-449-0067
Tube Tee

144490067
JTXS16: RNCC: 3 | RNVC: 2
91713579: RNCC: 5 | RNVC: 2
JTXS16: RNCC: 5 | RNVC: 2

24 Jul 1991

4730-14-367-7363

4730-14-296-7155

4730-14-268-9821

4730-14-430-2476
Tube Coupling

144302476
16787944: RNCC: 3 | RNVC: 2
16787944: RNCC: 5 | RNVC: 9

14 Mar 1989

4730-14-362-0999
Pipe Flange

143620999
GSM162-011F22REPA: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-574-2321
Hose Clamp

145742321
ASNA0033-019: RNCC: 1 | RNVC: 2
FX05-11-19V5W4: RNCC: 3 | RNVC: 2
HX05-019R: RNCC: 3 | RNVC: 2
ASNA0033-019: RNCC: 5 | RNVC: 2

18 Dec 2012

4730-14-460-4401
Quick Disconnect Coupling Half

144604401
N001-223-88: RNCC: 3 | RNVC: 2
N00122388: RNCC: 5 | RNVC: 2
400-354-28: RNCC: 5 | RNVC: 2
00008488: RNCC: 5 | RNVC: 2

26 Jan 1993

4730-14-568-6268
Flange Tee

145686268
TR20N: RNCC: 3 | RNVC: 2
600820: RNCC: 5 | RNVC: 2
9355 (3/4"): RNCC: 5 | RNVC: 9

23 Jun 2011

4730-14-410-7456
Pipe Flange

144107456
A02358-03-1000P010: RNCC: 3 | RNVC: 2

9 Jul 1986

4730-14-306-9284
Quick Disconnect Coupling Half

143069284
RBE6-2101DKR: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-334-8363
Tube To Boss Straight Adapter

143348363
ACA14X12-17N: RNCC: 3 | RNVC: 2

2 Jun 1976

4730-14-460-3993
Tube-Hose Adapter Body

144603993
A10112-00-0000P012: RNCC: 3 | RNVC: 2

21 Jan 1993

4730-14-360-4867
Fluid Passage Bolt

143604867
B0201-003F34: RNCC: 3 | RNVC: 2

23 Nov 1979

4730-14-376-6128
Quick Disconnect Reducer

143766128
31660810: RNCC: 3 | RNVC: 2
90083590000: RNCC: 5 | RNVC: 2
222-9900: RNCC: 5 | RNVC: 2
MAF0001004563: RNCC: 6 | RNVC: 9

28 Apr 1982

4730-14-409-4738
Hose To Boss Straight Adapter

144094738
NO PRIMARY REF14-409-4738: RNCC: 3 | RNVC: 2
5171713400: RNCC: 5 | RNVC: 2
19302892: RNCC: 5 | RNVC: 9
24030M33X1-5XC38: RNCC: 5 | RNVC: 9

28 May 1986

4730-14-383-2477
Fluid Pressure Line Multiple Connector

143832477
623-33-95SK: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-486-2147
Tube Fitting Clinch Sleeve

144862147
42967.0: RNCC: 3 | RNVC: 2
64818-8: RNCC: 5 | RNVC: 2

5 Mar 1997

4730-14-356-2709
Bulkhead Hose Connector

143562709
327: RNCC: 3 | RNVC: 2
327: RNCC: 5 | RNVC: 9

25 Apr 1979

4730-14-042-7084
Quick Disconnect Elbow

140427084
1032517: RNCC: 3 | RNVC: 2

31 Oct 1979

4730-14-350-5510
Raccord Clapet

143505510
2-90360: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-498-7037
Graisseur

144987037
NO PRIMARY REF14-498-7037: RNCC: 3 | RNVC: 2
5005097006: RNCC: 5 | RNVC: 9
A8: RNCC: 5 | RNVC: 9
F300 0T 008 0494: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-542-7128
Tube Coupling

145427128
329-50-105: RNCC: 3 | RNVC: 2

28 Jul 2004

4730-14-414-6522
Tube Tee

144146522
LL8450-08-64UK: RNCC: 3 | RNVC: 2
8450086466NU: RNCC: 5 | RNVC: 2

20 Feb 1987

4730-14-408-5458
Corps Equipe

144085458
129523: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-408-9796
Ens Essai Surpressi

144089796
2120304013630010A: RNCC: 3 | RNVC: 2

9 Apr 1986

4730-14-365-9792

4730-14-366-5901

4730-14-366-3662

4730-14-560-0937
Pipeline Flexible Spacer

145600937
EVCYDEAC3S: RNCC: 3 | RNVC: 2
FS0001320: RNCC: 6 | RNVC: 9

23 Mar 2009

4730-14-363-8029

4730-14-505-1918
Tube Coupling Nut Assembly

145051918
IE-JET22PE: RNCC: 3 | RNVC: 2
KE-JETI22PE: RNCC: 5 | RNVC: 2
EJETI22PE: RNCC: 5 | RNVC: 2
IEJET22PE: RNCC: 5 | RNVC: 2

11 Mar 1998

4730-14-500-4671
Tube Tee

145004671
EVL12L0MDKA3C: RNCC: 3 | RNVC: 2
EVL12-L0MDKA3C: RNCC: 3 | RNVC: 2
F300 0T 024 4840: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-427-0328
Pipe Flange

144270328
MAT162-0022DN65FEM: RNCC: 3 | RNVC: 2
MAT162-0022F10: RNCC: 3 | RNVC: 2

5 Oct 1988

4730-14-300-0194
Fluid Passage Bolt

143000194
L44312-10AGL: RNCC: 2 | RNVC: 2
BC3560-10AGL: RNCC: 3 | RNVC: 2
353-440-2346: RNCC: 5 | RNVC: 2
BC3560-10: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-362-7596

4730-14-343-2004

4730-14-265-6835
Doigt

142656835
202699: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-307-3886

4730-14-557-4236
Hose Clamp

145574236
E27851BL050070X: RNCC: 2 | RNVC: 2
A210606000012: RNCC: 3 | RNVC: 2

10 Jun 2008

4730-14-562-2608
Tube Elbow

145622608
EW38SREDCF: RNCC: 3 | RNVC: 2
EW38SRA3C: RNCC: 3 | RNVC: 9
FS0000309: RNCC: 6 | RNVC: 9

12 Oct 2009

4730-14-550-4025
Tube To Boss Straight Adapter

145504025
4DL12 16X1.50: RNCC: 3 | RNVC: 2
5010616338: RNCC: 5 | RNVC: 2

19 Jun 2006

4730-14-518-5923
Tube To Boss Straight Adapter

145185923
204104098: RNCC: 3 | RNVC: 2
5005030777: RNCC: 5 | RNVC: 2

9 Feb 2000

4730-14-309-5002
Pipeline Flexible Spacer

143095002
DILAT0FLEXNT50CCPN40: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-395-3703
Tube To Boss Straight Adapter

143953703
N0117F25B: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-325-5082
Tube To Boss Straight Adapter

143255082
EDM0611: RNCC: 3 | RNVC: 2
96060259: RNCC: 5 | RNVC: 2
96060259: RNCC: 5 | RNVC: 2
96060259: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-313-0948
Tube Fitting Clinch Sleeve

143130948
205-8Z73: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-485-3026
Tube Tee

144853026
RP1B725211001: RNCC: 3 | RNVC: 2

15 Jan 1997

4730-14-317-3377
Fluid Passage Bolt

143173377
0000290280: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-446-4632
Fluid Passage Bolt

144464632
215589: RNCC: 3 | RNVC: 2

20 Mar 1991

4730-14-543-5678
Sediment Strainer Element

145435678
710062: RNCC: 3 | RNVC: 2

23 Nov 2004

4730-14-504-6255
Quick Disconnect Coupling Half

145046255
80/9405075: RNCC: 3 | RNVC: 2

25 Feb 1998

4730-14-460-1716
Fluid Flow Restrictor

144601716
219706: RNCC: 3 | RNVC: 2
RAR1617: RNCC: 5 | RNVC: 2

13 Jan 1993

4730-14-434-9620
Flexible Tube Coupling Assembly

144349620
15BT1DN40/2LG220MM: RNCC: 3 | RNVC: 2

11 Oct 1989

4730-14-365-9643

4730-14-568-7770
Fluid Flow Restrictor

145687770
0646105: RNCC: 3 | RNVC: 2

5 Jul 2011

4730-14-455-6615
Pipeline Flexible Spacer

144556615
53-D-038-15: RNCC: 3 | RNVC: 2

5 Jun 1992

4730-14-333-3103
Pipe Flange

143333103
BN320-516TUBE168-3: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-297-6926
Tube To Boss Straight Adapter

142976926
Q5R1210-16X150: RNCC: 3 | RNVC: 2
RA12-10-16X1-5: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-466-7896
Flange To Boss Straight Adapter

144667896
915-3-66-152: RNCC: 3 | RNVC: 2

26 Nov 1993

4730-14-446-0266
Pipe Flange

144460266
J22-215DN300E24-2: RNCC: 2 | RNVC: 2

4 Mar 1991

4730-14-382-3969
Tube To Boss Straight Adapter

143823969
32-14-16-4: RNCC: 3 | RNVC: 9
BAZ98726: RNCC: 5 | RNVC: 2
2135-09-00-01: RNCC: 5 | RNVC: 9

17 Feb 1983

4730-14-339-9018
Tube Coupling Assembly

143399018
0-3951S20X16X20A: RNCC: 3 | RNVC: 2
0-3951S20X16X20A: RNCC: 5 | RNVC: 9
85-688-9439: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-14-281-2039
Tube Coupling

142812039
0489-00-1 1-2: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-303-2021
Bulkhead Hose Connector

143032021
A10-52-518-04-0: RNCC: 3 | RNVC: 2
A10-52-518-04-0: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-305-8962
Tube To Boss Straight Adapter

143058962
65-0-3465: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-507-2638
Quick Disconnect Coupling Half

145072638
RF5168-1-01: RNCC: 3 | RNVC: 2

24 Jun 1998

4730-14-294-3890
Fluid Pressure Line Multiple Connector

142943890
121A77-100-70-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-230-9797
Tube Tee

142309797
101-12-8X13NN: RNCC: 3 | RNVC: 2
0946710071: RNCC: 5 | RNVC: 2
0946710071: RNCC: 5 | RNVC: 9
946710071: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-396-9395
Tube To Boss Straight Adapter

143969395
2502 06 G17: RNCC: 3 | RNVC: 2
2502.06G17: RNCC: 5 | RNVC: 2
3502-6G17: RNCC: 5 | RNVC: 2

27 Nov 1984

4730-14-423-4527
Pipe Flange

144234527
UA50088006PN100-11D1SDN40: RNCC: 2 | RNVC: 2
4730HCPN100DN04011D1S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-490-0387
Fluid Pressure Line Multiple Connector

144900387
C22137-1: RNCC: 3 | RNVC: 2

10 Sep 1997

4730-14-442-9359
Quick Disconnect Coupling Assembly

144429359
MCR02-1902: RNCC: 3 | RNVC: 2

7 Nov 1990

4730-14-481-5801
Tube To Boss Straight Adapter

144815801
5A6L8-13CO: RNCC: 3 | RNVC: 2
81111901: RNCC: 5 | RNVC: 2
5000498826: RNCC: 5 | RNVC: 2
105120092: RNCC: 5 | RNVC: 9

16 May 1996

4730-14-344-6941
Bulkhead Hose Connector

143446941
EA1M712-17: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-032-1529
Tube Fitting Clinch Sleeve

140321529
Q1-5D14: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-459-4554
Flange To Hose Straight Adapter

144594554
MAT006-01-02: RNCC: 3 | RNVC: 2

1 Dec 1992

4730-14-260-9164
Pipe Flange

142609164
7062CC1F2M25AF42-2: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-530-5612
Tube To Boss Straight Adapter

145305612
G2401-8: RNCC: 3 | RNVC: 2

24 Jun 2002

4730-14-202-5288
Tube Tee

142025288
R6X10X10S: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-375-4728
Tube To Boss Straight Adapter

143754728
319A75-00-073: RNCC: 3 | RNVC: 2
319A-75-00-073: RNCC: 5 | RNVC: 2

26 Feb 1982

4730-14-354-0866
Fluid Flow Restrictor Unit

143540866
B14BA1020-020: RNCC: 3 | RNVC: 2
B14BA1020-020: RNCC: 5 | RNVC: 2
B14BA1020-020: RNCC: 5 | RNVC: 9

16 Jan 1979

4730-14-576-4946
Tube Tee

145764946
ASNA3752-161606: RNCC: 1 | RNVC: 2
ASNA3752-161606: RNCC: 3 | RNVC: 2

20 Jun 2013

4730-14-306-7387
Pipe Flange

143067387
553-000MA018DN20DE25: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-353-9532

4730-14-248-4230

4730-14-223-8668

4730-14-500-6870
Tube Tee

145006870
EVT20-S0MDKA3C: RNCC: 3 | RNVC: 2
EVT20S0MDKA3C: RNCC: 5 | RNVC: 2
F300 0T 024 7061: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-291-3970
Fluid Pressure Line Multiple Connector

142913970
0235227600: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-549-5881
Bulkhead Hose Connector

145495881
SV12LOMDHPCF: RNCC: 3 | RNVC: 2
5010596362: RNCC: 5 | RNVC: 2
SV12LOMDHPCF: RNCC: 5 | RNVC: 9

20 Apr 2006

4730-14-452-5589
Pipe Flange

144525589
LN320033F26DN100: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-378-1778

4730-14-262-6060
Bouchon Guide Clape

142626060
ADC50662: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-269-2082

4730-14-249-0728
Raccord Multiple Co

142490728
0000281964: RNCC: 3 | RNVC: 2
0000281964: RNCC: 5 | RNVC: 9
281964: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-388-1585
Tube To Boss Straight Adapter

143881585
UFL25G1H: RNCC: 3 | RNVC: 2

12 Oct 1983

4730-14-432-9484
Tube Coupling

144329484
A4H14902B: RNCC: 3 | RNVC: 2

5 Jul 1989

4730-14-451-3801
Tube Tee

144513801
333716: RNCC: 3 | RNVC: 2

15 Nov 1991

4730-14-411-2487
Tube Coupling

144112487
DHS613-618-42: RNCC: 3 | RNVC: 2

6 Aug 1986

4730-14-273-5179
Pipe Flange

142735179
7062SA1F1-108UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-398-5797
Tube Tee

143985797
GSM164-025F29: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-399-8795
Quick Disconnect Plug

143998795
N005-154-81: RNCC: 3 | RNVC: 2
RBE03-8500ICU: RNCC: 5 | RNVC: 2
799609228: RNCC: 5 | RNVC: 9

11 Apr 1985

4730-14-361-1325
Sediment Strainer Element

143611325
218607: RNCC: 3 | RNVC: 2
4-215004-0: RNCC: 5 | RNVC: 2
4-215004-0: RNCC: 5 | RNVC: 9

24 Jan 1980

4730-14-496-7492
Tube To Boss Straight Adapter

144967492
F00166116: RNCC: 3 | RNVC: 2
F00166116: RNCC: 5 | RNVC: 9

15 Oct 1997

4730-14-506-1417
Tube Tee

145061417
TE306SMFN: RNCC: 3 | RNVC: 2

8 Apr 1998

4730-14-325-9065
Pipe Flange

143259065
AS34TV106REP16: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-428-8344
Pipe Flange

144288344
DB1: RNCC: 3 | RNVC: 2
91622245: RNCC: 5 | RNVC: 2
0024288662: RNCC: 5 | RNVC: 2

22 Dec 1988

4730-14-539-3933
Tube Coupling

145393933
5005130373: RNCC: 3 | RNVC: 2

13 Jan 2004

4730-14-556-7400
Hose Bushing

145567400
8243 566: RNCC: 3 | RNVC: 2

8 Apr 2008

4730-14-410-8853
Quick Disconnect Coupling Half

144108853
RBE11-7104ICJEINOX: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-300-8242
Tube Tee

143008242
6103-5385: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-306-7029
Pipe Flange

143067029
GSM1664EDN40UA10ETCR0Q10-71CH: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-349-3583
Fluid Pressure Line Multiple Connector

143493583
5949-10: RNCC: 3 | RNVC: 2
11-1943: RNCC: 5 | RNVC: 2

22 May 1978

4730-14-572-6889
Fuel Feeder Manifold

145726889
108158: RNCC: 3 | RNVC: 2

25 Jul 2012

4730-14-577-9580
Swivel Flange To Hose Connector

145779580
ADAPT14158X00: RNCC: 3 | RNVC: 2
4730MT0200151: RNCC: 6 | RNVC: 9

21 Oct 2013

4730-14-376-4609
Raccord Entree Air

143764609
16559018: RNCC: 3 | RNVC: 2
16559018: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-202-5417

4730-14-250-0331

4730-14-244-0289

4730-14-562-6267
Tube Union

145626267
GE12LMEDCF: RNCC: 3 | RNVC: 2
426273: RNCC: 5 | RNVC: 2
GE12LMEDCF: RNCC: 5 | RNVC: 9

10 Nov 2009

4730-14-498-7267
Tube To Boss Straight Adapter

144987267
NO PRIMARY REF14-498-7267: RNCC: 3 | RNVC: 2
12-10-04-119: RNCC: 5 | RNVC: 9
121004119: RNCC: 5 | RNVC: 9
F300 0T 008 2215: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-413-5091
Separateur

144135091
0185100390: RNCC: 3 | RNVC: 2

17 Dec 1986

4730-14-421-8696
Collier Complet

144218696
1460937: RNCC: 3 | RNVC: 2

9 Feb 1988

4730-14-396-8296

4730-14-304-9167

4730-14-341-6695

4730-14-322-0973
Pipe Flange

143220973
561755: RNCC: 3 | RNVC: 2
5156175500: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-354-7607
Fluid Pressure Line Multiple Connector

143547607
47908A: RNCC: 3 | RNVC: 2

20 Feb 1979

4730-14-325-5083
Tube To Boss Straight Adapter

143255083
EDM0614: RNCC: 3 | RNVC: 2
96060261: RNCC: 5 | RNVC: 9
96060261: RNCC: 5 | RNVC: 9
96060261: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-372-4340
Lubricant Pressure Relief Fitting

143724340
3545: RNCC: 3 | RNVC: 2
DLT031042: RNCC: 5 | RNVC: 2

1 Sep 1981

4730-14-325-6813
Bulkhead Hose Connector

143256813
0000365710: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-399-0787
Tube Coupling Inverted Nut

143990787
603527: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-372-3028
Fluid Pressure Line Multiple Connector

143723028
1111430900: RNCC: 3 | RNVC: 2
DAH1111430900: RNCC: 5 | RNVC: 2

1 Sep 1981

4730-14-271-8291
Tube To Boss Straight Adapter

142718291
7339C20D: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-040-3831
Flexible Tube Coupling Assembly

140403831
L16F3: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-420-0507
Tube To Hose Straight Adapter

144200507
B20ELM20: RNCC: 3 | RNVC: 2
19799: RNCC: 5 | RNVC: 2

18 Nov 1987

4730-14-274-6954
Fluid Passage Bolt

142746954
RA13214: RNCC: 3 | RNVC: 2
84425-14: RNCC: 5 | RNVC: 2
85-587-8950: RNCC: 6 | RNVC: 9

1 Jan 1971

4730-14-222-7324
Tube Tee

142227324
GSM1297FE3-33TABLEAU2: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-397-7004
Embout Filete A Sou

143977004
GSM164-023F45: RNCC: 3 | RNVC: 2
MAT164-0355F45: RNCC: 3 | RNVC: 2
4730ACF3PN250DE48,26: RNCC: 3 | RNVC: 9

14 Dec 1984

4730-14-276-2071
Pipe Flange

142762071
6784-1EA38: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-207-5658
Fluid Pressure Line Multiple Connector

142075658
TS0384: RNCC: 3 | RNVC: 2
SV3-3043: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-427-4509
Tube Tee

144274509
4730JCING168,3X12,5-114,3X8,8: RNCC: 2 | RNVC: 2

20 Oct 1988

4730-14-389-8458
Fluid Pressure Line Multiple Connector

143898458
01180813: RNCC: 3 | RNVC: 2
6802: RNCC: 5 | RNVC: 2
U6802: RNCC: 5 | RNVC: 2
91554163: RNCC: 5 | RNVC: 2

20 Dec 1983

4730-14-527-0913
Exhaust-Intake Pneumatic Muffler

145270913
19047.516.000: RNCC: 3 | RNVC: 2

2 Oct 2001

4730-14-567-3866
Hose Clamp

145673866
1141193: RNCC: 3 | RNVC: 2

10 Mar 2011

4730-14-572-6602
Tube Outlet

145726602
82661092000: RNCC: 3 | RNVC: 2

23 Jul 2012

4730-14-567-2883
Tube Outlet

145672883
3473-79: RNCC: 3 | RNVC: 2

2 Mar 2011

4730-14-295-0283
Diaphragme Special

142950283
AS34TQ109BREP5: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-320-2058

4730-14-346-4543

4730-14-408-0808
Hose To Boss Straight Adapter

144080808
0369-06: RNCC: 3 | RNVC: 2
600426: RNCC: 5 | RNVC: 2
7910011595: RNCC: 5 | RNVC: 2

19 Mar 1986

4730-14-562-8128
Tube Elbow

145628128
5005430268: RNCC: 1 | RNVC: 2
98300901: RNCC: 3 | RNVC: 2
20984359: RNCC: 5 | RNVC: 2

24 Nov 2009

4730-14-556-7522
Hose Cross

145567522
D208 03B: RNCC: 3 | RNVC: 2

8 Apr 2008

4730-14-558-6586
Hose To Boss Straight Adapter

145586586
0245 44: RNCC: 3 | RNVC: 2

23 Oct 2008

4730-14-502-4543
Tube Coupling Inverted Nut

145024543
L327062: RNCC: 3 | RNVC: 2
5000254955: RNCC: 5 | RNVC: 2
DBAL327062: RNCC: 5 | RNVC: 9
5000254955: RNCC: 6 | RNVC: 9

17 Dec 1997

4730-14-374-7769
Tube Tee

143747769
0000362380: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-515-3838
Tube To Boss Straight Adapter

145153838
6200047: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-407-5845
Kit Raccord Mano

144075845
DLR99828: RNCC: 3 | RNVC: 2

27 Feb 1986