What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 146 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 146 of 185

4730-14-225-0039
Raccord Droit Gonfl

142250039
B22946B22480: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-544-6348
Tube To Boss Straight Adapter

145446348
0158672007: RNCC: 3 | RNVC: 2
072833000000049: RNCC: 5 | RNVC: 2

15 Feb 2005

4730-14-301-6945
Tube Coupling Assembly

143016945
3901P16A: RNCC: 3 | RNVC: 2
3901P16A: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-231-2705
Fluid Pressure Line Multiple Connector

142312705
1094S: RNCC: 3 | RNVC: 9
1000801P: RNCC: 5 | RNVC: 9
1094: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-324-1049
Tube To Boss Straight Adapter

143241049
466-9M17P34: RNCC: 3 | RNVC: 2
466-9M17P34: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-251-5587
Self-Sealing Coupling Assembly

142515587
CDC65427: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-489-5724
Self-Sealing Coupling Assembly

144895724
1515493: RNCC: 3 | RNVC: 2

5 Aug 1997

4730-14-574-2753
Quick-Disconnect Nipple

145742753
NH3/4GRO: RNCC: 3 | RNVC: 2

20 Dec 2012

4730-14-300-7536
Tube Tee

143007536
GSM523-026F12: RNCC: 3 | RNVC: 2
411MA127FB20: RNCC: 5 | RNVC: 2
GSM523-26F12: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-364-9591
Tube To Boss Straight Adapter

143649591
58421: RNCC: 3 | RNVC: 2
58421: RNCC: 5 | RNVC: 2
85-691-3045: RNCC: 6 | RNVC: 9

2 Sep 1980

4730-14-260-9238

4730-14-315-9626

4730-14-390-5251
Bulkhead Hose Connector

143905251
6-4FH2BZSS: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-400-7617
Fluid Pressure Line Multiple Connector

144007617
200065-0: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-354-7608
Fluid Pressure Line Multiple Connector

143547608
47908B: RNCC: 3 | RNVC: 2

20 Feb 1979

4730-14-336-9481
Fluid Pressure Line Multiple Connector

143369481
228291: RNCC: 3 | RNVC: 2
228291: RNCC: 5 | RNVC: 2
228291: RNCC: 5 | RNVC: 9

7 Oct 1976

4730-14-231-0870
Tube Tee

142310870
R6X12LX8: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-397-5655
Fluid Passage Bolt

143975655
0000192447: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-571-5736
Pipe Flange

145715736
FR-26044000050: RNCC: 3 | RNVC: 2
26044000050: RNCC: 5 | RNVC: 2

10 Apr 2012

4730-14-479-7417
Embout Bride Plane

144797417
MAT171-1982F5: RNCC: 3 | RNVC: 2

2 Feb 1996

4730-14-479-4928
Hose Coupling Assembly

144794928
RBE 08.2813/IA/DKB/FB/VD/OD: RNCC: 3 | RNVC: 2
RBE8-2813DKBODICVDFB: RNCC: 5 | RNVC: 9

17 Jan 1996

4730-14-242-7991
Tube Tee

142427991
NG40901-4APL70N0M1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-428-5174
Quick Disconnect Coupling Half

144285174
RBE03-7804IC3: RNCC: 3 | RNVC: 2
49551: RNCC: 5 | RNVC: 9

8 Dec 1988

4730-14-505-3349
Tube Union

145053349
GE12-PLR-ED-0MD: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-400-3968
Pipe Flange

144003968
EA1M111-10-11: RNCC: 3 | RNVC: 2
85-692-8688: RNCC: 6 | RNVC: 9

24 Apr 1985

4730-14-343-8129

4730-14-226-8820

4730-14-280-6639
Raccord Filete Deux

142806639
261757: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-317-6324

4730-14-245-9465

4730-14-348-0536
Raccord Corps

143480536
A77384-1: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-230-2150
Fluid Passage Bolt

142302150
90095007: RNCC: 3 | RNVC: 2
8000334: RNCC: 5 | RNVC: 2
90095007: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-506-0327
Tube Coupling

145060327
RA1M504250139: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-402-0032
Tambour Denroulemen

144020032
ECE/MAT 8403 350X800X620: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-493-6616
Flexible Tube Coupling Assembly

144936616
ALZ186530106001: RNCC: 3 | RNVC: 2

8 Oct 1997

4730-14-217-6084

4730-14-358-2199

4730-14-314-1755

4730-14-207-9040
Tube To Boss Straight Adapter

142079040
1P467-37D: RNCC: 3 | RNVC: 2
0011737: RNCC: 5 | RNVC: 2
FOE1P467-37D: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-300-7507
Tube Tee

143007507
GSM523-026F29: RNCC: 3 | RNVC: 2
411MA127FA13: RNCC: 5 | RNVC: 2
GSM523-26F29: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-537-7114
Hydraulic System Accessories Manifold

145377114
C12718/07: RNCC: 3 | RNVC: 2

19 Nov 2003

4730-14-245-1725
Raccord Special

142451725
R22-40V90G1: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-480-5011
Tube Union

144805011
RMM12: RNCC: 3 | RNVC: 2
91585427: RNCC: 5 | RNVC: 2

14 Mar 1996

4730-14-436-8464
Hose Coupling Assembly

144368464
DA2C729001250A1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-479-2031
Tube To Boss Straight Adapter

144792031
RD008.09: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-564-6141
Tube Tee

145646141
EL28LMEDOMDCF: RNCC: 3 | RNVC: 2

12 May 2010

4730-14-567-4905
Hose Clamp

145674905
994565: RNCC: 3 | RNVC: 2

18 Mar 2011

4730-14-355-8910
Tube To Boss Straight Adapter

143558910
4662: RNCC: 3 | RNVC: 9

5 Apr 1979

4730-14-517-8170
Fluid Pressure Line Multiple Connector

145178170
0301067490: RNCC: 3 | RNVC: 2

13 Jan 2000

4730-14-512-8324
Tube Coupling

145128324
212080: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-500-4686
Tube To Boss Straight Adapter

145004686
E63500000002: RNCC: 3 | RNVC: 2
F300 0T 024 4855: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-312-7709

4730-14-244-5726

4730-14-367-0386

4730-14-346-7039
Bride Speciale

143467039
6784-1CP20: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-576-2275
Tube Coupling Nut

145762275
ASNA3769V16: RNCC: 1 | RNVC: 2
ASNA3769V16: RNCC: 3 | RNVC: 2

7 Jun 2013

4730-14-285-4671

4730-14-233-9575

4730-14-568-6325
Tube Tee

145686325
770130232: RNCC: 3 | RNVC: 2

23 Jun 2011

4730-14-260-9338

4730-14-325-1776

4730-14-267-9899
Douille A Souder

142679899
7692-2636: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-325-3729
Tube To Boss Straight Adapter

143253729
102024-03100: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-268-0421
Joint Daccouplement

142680421
A5-12: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-359-8753
Bride

143598753
2-19288: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-446-7872
Axe D Entrainement

144467872
0064772470: RNCC: 3 | RNVC: 2

15 Apr 1991

4730-14-560-7074
Lubrication Fitting

145607074
J0045801: RNCC: 3 | RNVC: 2
CV150108: RNCC: 5 | RNVC: 2
J0045801: RNCC: 5 | RNVC: 2

19 May 2009

4730-14-556-9310
Fluid Flow Restrictor

145569310
B0136C030-01: RNCC: 3 | RNVC: 2

22 Apr 2008

4730-14-411-5481
Coude Male

144115481
520606: RNCC: 3 | RNVC: 2

20 Aug 1986

4730-14-411-5362
Bloc Raccordement

144115362
0A2746: RNCC: 3 | RNVC: 2

20 Aug 1986

4730-14-275-6948
Bride De Controle

142756948
70511CGF1REP0: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-564-1254
Tube To Boss Straight Adapter

145641254
82424358000: RNCC: 3 | RNVC: 2

9 Apr 2010

4730-14-234-1902
Presse Etoupe Speci

142341902
13585: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-575-4598
Pipe Elbow

145754598
D156 95B: RNCC: 3 | RNVC: 2

8 Apr 2013

4730-14-571-3610
Tube To Hose Elbow

145713610
7421622567: RNCC: 1 | RNVC: 2
88308501: RNCC: 3 | RNVC: 2

16 Mar 2012

4730-14-577-0766
Tube Tee

145770766
0301010960: RNCC: 3 | RNVC: 2

5 Aug 2013

4730-14-226-3431

4730-14-539-9838
Tube To Boss Straight Adapter

145399838
F4PB8-1/8: RNCC: 3 | RNVC: 2

25 Feb 2004

4730-14-340-0887
Tube To Boss Straight Adapter

143400887
8-4-6XG3-8ACIER: RNCC: 3 | RNVC: 2
8-4-6XG3-8ACIER: RNCC: 3 | RNVC: 2

18 Jan 1977

4730-14-292-2659
Quick Disconnect Coupling Half

142922659
E29572-100-102-114: RNCC: 3 | RNVC: 9
M4ZS330D3073: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-327-0079
Fluid Pressure Line Multiple Connector

143270079
121S77-100-10-0M1: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-557-8838
Branched Tubing Connector

145578838
NO PRIMARY REF 14-557-8838: RNCC: 3 | RNVC: 2
866171: RNCC: 5 | RNVC: 2
MV 8414: RNCC: 5 | RNVC: 9

25 Jul 2008

4730-14-423-5630
Bulkhead Hose Connector

144235630
F530-08-03: RNCC: 3 | RNVC: 2

21 Apr 1988

4730-14-556-9745
Union Thread Piece

145569745
NO PRIMARY REF 14-556-9745: RNCC: 3 | RNVC: 2
3317: RNCC: 5 | RNVC: 2

25 Apr 2008

4730-14-498-3057
Tube To Boss Straight Adapter

144983057
91952493: RNCC: 3 | RNVC: 2
PAA58-43-002-02: RNCC: 3 | RNVC: 2
F300 0T 004 7684: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-215-7046
Flexible De Graissa

142157046
NO PRIMARY REF14-215-7046: RNCC: 3 | RNVC: 2
0851584100: RNCC: 5 | RNVC: 2
8515841: RNCC: 5 | RNVC: 2
0851584100: RNCC: 5 | RNVC: 2
GC1154: RNCC: 5 | RNVC: 9
GI1154: RNCC: 5 | RNVC: 9
8515841: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-237-5541
Raccord Special

142375541
RP18C13-37: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-307-5170
Tube To Boss Straight Adapter

143075170
100007128-00: RNCC: 3 | RNVC: 2
PR3571: RNCC: 5 | RNVC: 9
PR3571A: RNCC: 5 | RNVC: 9
100-007-128-00: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-532-6525
Suction Pump Connector

145326525
JF37175-0000: RNCC: 3 | RNVC: 2

26 Nov 2002

4730-14-528-8468
Fluid Pressure Line Multiple Connector

145288468
2K92-002: RNCC: 3 | RNVC: 2

20 Feb 2002

4730-14-542-0624
Tube To Boss Straight Adapter

145420624
3830340-001: RNCC: 3 | RNVC: 2
502108004012A: RNCC: 3 | RNVC: 9
383 0340-001: RNCC: 5 | RNVC: 2

2 Jul 2004

4730-14-312-8162
Lubrication Fitting

143128162
BTR4-4793DIAM8: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-570-9819
Tube Elbow

145709819
708130S220-01B: RNCC: 3 | RNVC: 2

9 Feb 2012

4730-14-333-3108
Pipe Flange

143333108
BN320-516TUBE48-3: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-323-4965
Tube To Boss Straight Adapter

143234965
9910553: RNCC: 3 | RNVC: 2
905-083-201: RNCC: 5 | RNVC: 2
2083-4-6: RNCC: 5 | RNVC: 9
9910553: RNCC: 5 | RNVC: 9
NMNM4-6: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-573-9369
Pipe To Tube Straight Adapter

145739369
1-2FH4BZ-SS-C: RNCC: 3 | RNVC: 2
1-2FH4BZ-SS-C: RNCC: 5 | RNVC: 2
91635646: RNCC: 5 | RNVC: 2

21 Nov 2012

4730-14-393-1316
Fluid Passage Bolt

143931316
99641224003: RNCC: 3 | RNVC: 2
99-641-224-003: RNCC: 5 | RNVC: 2

12 Apr 1984

4730-14-559-4868
Quick Disconnect Coupling Half

145594868
P2550183: RNCC: 3 | RNVC: 2
P0500158: RNCC: 5 | RNVC: 1

19 Jan 2009

4730-14-577-8600
Tube Nipple

145778600
10620358: RNCC: 3 | RNVC: 1

15 Oct 2013

4730-14-328-4330
Lubrication Fitting

143284330
5004-8X125: RNCC: 3 | RNVC: 2
ALG5004-8X125: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-310-3230
Bride Support

143103230
000MA272F12REP4-1: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-559-0359
Self-Sealing Coupling Half

145590359
SM 136A 16: RNCC: 3 | RNVC: 2

1 Dec 2008

4730-14-263-0863
Passage De Cloison

142630863
PCA3-8: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-566-9415
Quick Disconnect Coupling Half

145669415
HA 05053 EO: RNCC: 3 | RNVC: 2
A231004000465: RNCC: 5 | RNVC: 2

18 Jan 2011

4730-14-399-9093
Tube Union

143999093
PZCF189: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-557-1754
Tube Nipple

145571754
1903D945: RNCC: 3 | RNVC: 2
RE8D: RNCC: 5 | RNVC: 2

23 May 2008

4730-14-481-2178
Tube To Boss Straight Adapter

144812178
23 49 41: RNCC: 3 | RNVC: 2

25 Apr 1996

4730-14-481-1917
Lubrication Fitting

144811917
1159: RNCC: 3 | RNVC: 2
F3832010: RNCC: 5 | RNVC: 9

25 Apr 1996

4730-14-406-1426
Tube To Boss Straight Adapter

144061426
C103465: RNCC: 3 | RNVC: 2
1004938M00: RNCC: 5 | RNVC: 2

8 Jan 1986

4730-14-516-7367
Tube Coupling Assembly

145167367
8003005: RNCC: 3 | RNVC: 2
Y00005527: RNCC: 3 | RNVC: 2
Y00005527: RNCC: 5 | RNVC: 9

13 Oct 1999

4730-14-423-9848
Tube To Boss Straight Adapter

144239848
9718A: RNCC: 3 | RNVC: 2
91472409: RNCC: 5 | RNVC: 2

5 May 1988

4730-14-521-2593
Quick Disconnect Coupling Half

145212593
1823373027: RNCC: 3 | RNVC: 2
SYB0985: RNCC: 5 | RNVC: 2

13 Jul 2000

4730-14-543-8004
Tube To Boss Straight Adapter

145438004
9321033: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-212-3538
Tube Coupling Assembly

142123538
3601S32A: RNCC: 3 | RNVC: 2
3601K32A: RNCC: 5 | RNVC: 9
3601S32A: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-316-2609
Fuel Feeder Manifold

143162609
0243107150: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-577-5280
Pipe To Tube Swivel Joint

145775280
CS10FBSPC06F: RNCC: 3 | RNVC: 2

20 Sep 2013

4730-14-576-1857
Flange To Tube Straight Adapter

145761857
M2821351500000: RNCC: 3 | RNVC: 2

4 Jun 2013

4730-14-566-6704
Pipe Fitting Flared Collar

145666704
P7220203: RNCC: 3 | RNVC: 2

6 Dec 2010

4730-14-520-7085
Union Pour Tube

4730-14-496-3106
Coude

4730-14-513-4790
Guide Air

145134790
3TM0304A: RNCC: 3 | RNVC: 2

19 Mar 1999

4730-14-474-7712
Threaded Tube Fitting Plug

144747712
OB30STAC230: RNCC: 3 | RNVC: 2

1 Mar 1995

4730-14-238-9652
Tube To Boss Straight Adapter

142389652
705058: RNCC: 3 | RNVC: 9
062705058: RNCC: 5 | RNVC: 9
66386: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-202-5275
Tube Tee

142025275
R6X12X12: RNCC: 3 | RNVC: 2
R14063: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-371-4189
Pipe Flange

143714189
0000486610: RNCC: 3 | RNVC: 2
0000486610: RNCC: 5 | RNVC: 9
486610: RNCC: 5 | RNVC: 9

5 Aug 1981

4730-14-359-5621
Tube Tee

143595621
10RA10X6X8: RNCC: 3 | RNVC: 2
1TR10X6X8: RNCC: 3 | RNVC: 2
TRA10X6X8N: RNCC: 3 | RNVC: 2
0024368059: RNCC: 5 | RNVC: 2
0024368059: RNCC: 5 | RNVC: 9

15 Oct 1979

4730-14-362-4976
Tube To Boss Straight Adapter

143624976
003031282P: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-403-9478
Tube To Boss Straight Adapter

144039478
GE8LMEDA2L: RNCC: 3 | RNVC: 2
GE8LMEDA2L: RNCC: 5 | RNVC: 2
GE8LMEDA2L: RNCC: 5 | RNVC: 9

11 Sep 1985

4730-14-395-3561
Sediment Strainer Element

143953561
10-125-302: RNCC: 3 | RNVC: 9

2 Oct 1984

4730-14-357-0922
Quick Disconnect Coupling Assembly

143570922
2427428840: RNCC: 3 | RNVC: 2
2427428840: RNCC: 5 | RNVC: 9

7 Jun 1979

4730-14-273-5400

4730-14-457-0169
Quick Disconnect Plug

144570169
80-09-03: RNCC: 3 | RNVC: 2

30 Jul 1992

4730-14-242-8540
Tube To Boss Straight Adapter

142428540
R701-01: RNCC: 3 | RNVC: 2
212309: RNCC: 5 | RNVC: 2
212309G: RNCC: 5 | RNVC: 2
R70101: RNCC: 5 | RNVC: 2
062052465: RNCC: 5 | RNVC: 9
52465: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-323-2613
Boulon Equipe

143232613
501-713-506-0: RNCC: 3 | RNVC: 2
85-800-3056: RNCC: 6 | RNVC: 9

1 Jan 1975

4730-14-407-2094
Tube Fitting Flared Sleeve

144072094
NO PRIMARY REF14-407-2094: RNCC: 3 | RNVC: 2
230854: RNCC: 5 | RNVC: 2
230854: RNCC: 5 | RNVC: 9

12 Feb 1986

4730-14-542-0554
Tube To Boss Straight Adapter

145420554
25242034-120: RNCC: 3 | RNVC: 2
502105007010A: RNCC: 3 | RNVC: 9

2 Jul 2004

4730-14-259-4723
Demie-Couronne

142594723
0061-425-1010DET13: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-309-4677
Tube Tee

143094677
40212: RNCC: 3 | RNVC: 2
104-12-00NU: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-572-9468
Quick Disconnect Coupling Half

145729468
CBI06-1101IAJV: RNCC: 3 | RNVC: 2
725814: RNCC: 5 | RNVC: 2

30 Aug 2012

4730-14-321-5532
Pipe Flange

143215532
M10-67-108: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-031-5545

4730-14-290-1293

4730-14-285-0206

4730-14-497-0278
Fluid Pressure Line Multiple Connector

144970278
50-4937: RNCC: 3 | RNVC: 2
F300 0T 022 5746: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-423-4305
Pipe Flange

144234305
UA50088006PN150-11C1DN100: RNCC: 2 | RNVC: 2
4730HCPN150DN10011C1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-235-8776
Tube To Boss Straight Adapter

142358776
G12-17-15-21: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-466-8946
Secteur De Blocage

144668946
MAT145-0070: RNCC: 3 | RNVC: 2

8 Dec 1993

4730-14-313-5823
Tube To Boss Straight Adapter

143135823
121E71-525-03-0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-345-1810
Tube Tee

143451810
5-3951R25X32X25: RNCC: 3 | RNVC: 2
5-3951R25X32X25: RNCC: 5 | RNVC: 9

5 Oct 1977

4730-14-263-6377
Tube To Boss Straight Adapter

142636377
7062BC1RCET2-30A52-3: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-416-3277
Tube To Boss Straight Adapter

144163277
Q15GE16S1/2BSPK NU: RNCC: 3 | RNVC: 2
8405162166NU: RNCC: 3 | RNVC: 2

3 Jun 1987

4730-14-344-8257
Return Tube Bend

143448257
605420REP12: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-484-6242
Quick Disconnect Coupling Half

144846242
E-511-14ACIERZINGUE: RNCC: 3 | RNVC: 2
11058: RNCC: 5 | RNVC: 2
34.611028: RNCC: 5 | RNVC: 2

28 Nov 1996

4730-14-278-9264
Tube To Boss Straight Adapter

142789264
12-6-12X100: RNCC: 3 | RNVC: 2
UMA6X12-100N: RNCC: 3 | RNVC: 2
4A6-12X100: RNCC: 3 | RNVC: 2
99-621-06-122-1: RNCC: 5 | RNVC: 2
99621061221: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-481-6248
Tube Coupling

144816248
4461008VIKING-JOHNSON48,3/50: RNCC: 3 | RNVC: 9

23 May 1996

4730-14-311-2831
Swivel Retaining Pipe Flange

143112831
RUAN7516-48-3: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-451-5113
Tube Fitting Socket Welded Ferrule

144515113
540610: RNCC: 3 | RNVC: 2

21 Nov 1991

4730-14-529-3707
Tube-Pipe Fitting Kit

145293707
567103: RNCC: 3 | RNVC: 2

26 Mar 2002

4730-14-561-6134
Tube Tee

145616134
8JMLOS: RNCC: 3 | RNVC: 2
001998: RNCC: 5 | RNVC: 2
20 250 100 2470: RNCC: 5 | RNVC: 2
4730PL0565553: RNCC: 6 | RNVC: 9

5 Aug 2009

4730-14-443-9539
Tube Coupling

144439539
K102382: RNCC: 3 | RNVC: 2
K102382: RNCC: 6 | RNVC: 9

17 Dec 1990

4730-14-511-0607
Pipe Fitting Assortment

145110607
8816557113: RNCC: 3 | RNVC: 2

2 Dec 1998

4730-14-216-7920
Sediment Strainer Element

142167920
251070741: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-418-2305
Tube To Hose Straight Adapter

144182305
16178839: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-493-8271
Hose To Boss Straight Adapter

144938271
5005030558: RNCC: 3 | RNVC: 2
F300 0T 014 1598: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-563-7596
Tube Union

145637596
GE22LR1CFX: RNCC: 3 | RNVC: 2
A231004000432: RNCC: 5 | RNVC: 2

11 Mar 2010

4730-14-564-7525
Hydraulic System Accessories Manifold

145647525
36512365: RNCC: 3 | RNVC: 2

3 Jun 2010

4730-14-389-2977
Bride Centrale

143892977
2-24771: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-458-0786
Union Pour Tube

4730-14-499-2771
Contre-Ecrou

4730-14-247-6234
Raccord Droit De Bo

142476234
0946673014: RNCC: 3 | RNVC: 2
0946673014: RNCC: 5 | RNVC: 9
946673014: RNCC: 5 | RNVC: 9
30901748: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-350-8428

4730-14-429-3851
Tube Coupling

144293851
ED10: RNCC: 3 | RNVC: 2

20 Jan 1989

4730-14-333-5404
Fluid Pressure Line Multiple Connector

143335404
324307REPU3: RNCC: 3 | RNVC: 2
324307REPU3: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-519-0486
Quick Disconnect Coupling Half

145190486
118E4126LTAJ: RNCC: 3 | RNVC: 2

2 Mar 2000

4730-14-415-2606
Pipe Flange

144152606
1713253020: RNCC: 3 | RNVC: 2
1713253020: RNCC: 5 | RNVC: 9
2280167: RNCC: 5 | RNVC: 9

22 Apr 1987

4730-14-514-3664
Tube To Boss Straight Adapter

145143664
RA1B726200014: RNCC: 3 | RNVC: 2

18 May 1999

4730-14-461-7776
Hose Coupling Assembly

144617776
10039739: RNCC: 3 | RNVC: 2

24 Mar 1993

4730-14-432-9174
Tube To Boss Straight Adapter

144329174
X555112: RNCC: 3 | RNVC: 2
X555112-79197: RNCC: 5 | RNVC: 2

3 Jul 1989

4730-14-330-6516
Traversee Manchette

143306516
BN347-501-108: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-505-3450
Hydraulic Swivel Joint

145053450
SWVE10LROMDA3C: RNCC: 3 | RNVC: 2
SWVE10-PLR-0MD: RNCC: 5 | RNVC: 2

18 Mar 1998

4730-14-280-0827
Quick Disconnect Coupling Assembly

142800827
SDS1-50BDB: RNCC: 3 | RNVC: 2
SDS12-48X50: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-269-2077
Pipe Flange

142692077
7066EE1F70: RNCC: 2 | RNVC: 2
4730BJ-70F: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-373-8373
Quick Disconnect Coupling Half

143738373
PSP06-1116/LD/CP/VI: RNCC: 3 | RNVC: 2
PSP06-1116NSCPVI: RNCC: 3 | RNVC: 2
PSP06-1116LNSCPVI: RNCC: 5 | RNVC: 2

13 Nov 1981

4730-14-464-9619
Tube Coupling Assembly

144649619
365A52-1363-20: RNCC: 3 | RNVC: 2

8 Sep 1993

4730-14-571-6596
Tube Elbow

145716596
5005330155: RNCC: 1 | RNVC: 2
3450-00-00-21: RNCC: 3 | RNVC: 2
5005330004: RNCC: 5 | RNVC: 9

18 Apr 2012

4730-14-236-6333
Tube Fitting Clinch Sleeve

142366333
205-6RR: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-500-8530
Pipe Flange

145008530
E65201130017: RNCC: 3 | RNVC: 2
F300 0T 024 8733: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-463-0898
Pipe Flange

144630898
M10234: RNCC: 3 | RNVC: 2

26 May 1993

4730-14-406-7537
Tube Tee

144067537
T77: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-405-0691
Tube Coupling

144050691
270GCU18 1/2: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-512-9162
Tube Coupling

145129162
562407: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-411-8833
Pipe To Gas Fitting Straight Adapter

144118833
850441: RNCC: 3 | RNVC: 2

10 Sep 1986

4730-14-559-0849
Tube-Hose Fitting Compression Sleeve

145590849
-OL T 1.5M4: RNCC: 3 | RNVC: 2
185770659: RNCC: 5 | RNVC: 2

4 Dec 2008

4730-14-500-4809
Threaded Tube Fitting Plug

145004809
L682041: RNCC: 3 | RNVC: 2
DBAL682041: RNCC: 5 | RNVC: 9
L682041PG: RNCC: 5 | RNVC: 9
F300 0T 024 4979: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-236-6526
Fluid Pressure Line Multiple Connector

142366526
509-6NN: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-469-6799
Fluid Flow Restrictor

144696799
DA2C721200922: RNCC: 3 | RNVC: 2

4 May 1994

4730-14-488-3012
Fluid Flow Restrictor

144883012
321567/1: RNCC: 3 | RNVC: 2
573594-8: RNCC: 5 | RNVC: 2

29 Apr 1997

4730-14-405-0692
Tube Coupling

144050692
270GCU18 3/4: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-308-5050

4730-14-309-2997

4730-14-542-3541
Tube Union

145423541
S021124-6-1-80R: RNCC: 3 | RNVC: 2

8 Jul 2004

4730-14-219-5557
Mamelon Double Equi

142195557
12010R: RNCC: 3 | RNVC: 2
685-510-020-0: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-576-2033
Pipe Elbow Assembly

145762033
058-004-301-6: RNCC: 3 | RNVC: 2

5 Jun 2013

4730-14-304-4630
Bulkhead Hose Connector

143044630
F721-009: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-246-1389

4730-14-316-9548

4730-14-222-2210

4730-14-532-4031
Fluid Pressure Line Multiple Connector

145324031
RA1M726225: RNCC: 3 | RNVC: 2

30 Oct 2002

4730-14-228-5636
Tube Coupling Inverted Nut

142285636
7390: RNCC: 3 | RNVC: 2
LB7390: RNCC: 5 | RNVC: 2
124J17: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-343-7573
Tube To Boss Straight Adapter

143437573
A80537: RNCC: 3 | RNVC: 2

13 Jul 1977

4730-14-340-2728
Sediment Strainer Element

143402728
827: RNCC: 3 | RNVC: 9
23212050: RNCC: 5 | RNVC: 9

14 Feb 1977

4730-14-448-9853
Bulkhead Hose Connector

144489853
XSV6PL: RNCC: 3 | RNVC: 2

24 Jul 1991

4730-14-308-8243
Pipe Flange

143088243
403034: RNCC: 3 | RNVC: 2
P403034: RNCC: 5 | RNVC: 9
403034: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-331-1258
Tube Coupling Inverted Nut

143311258
9925121: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-397-9353
Tube To Hose Straight Adapter

143979353
1LEG21: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-329-2804
Pipeline Flexible Spacer

143292804
I131NTE400MAR: RNCC: 2 | RNVC: 2
DILNTE400MAR: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-400-1762
Tube To Boss Straight Adapter

144001762
BTH33801321: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-369-9205
Tube To Boss Straight Adapter

143699205
5864P: RNCC: 3 | RNVC: 9
5864: RNCC: 5 | RNVC: 9
5864: RNCC: 5 | RNVC: 9

18 May 1981

4730-14-357-0943
Hydraulic System Accessories Manifold

143570943
79047597: RNCC: 3 | RNVC: 2
79047597: RNCC: 5 | RNVC: 9

7 Jun 1979

4730-14-560-1508
Quick Disconnect Plug

145601508
10554142: RNCC: 3 | RNVC: 2

30 Mar 2009

4730-14-420-0973
Pipeline Flexible Spacer

144200973
0285321480: RNCC: 3 | RNVC: 2

18 Nov 1987

4730-14-531-3810
Fluid Pressure Line Multiple Connector

145313810
RA1M522004260: RNCC: 3 | RNVC: 2

14 Aug 2002

4730-14-345-6539
Tube To Boss Straight Adapter

143456539
HM43843: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-507-0543
Tube Tee

145070543
PE66775TE06: RNCC: 3 | RNVC: 2

8 Jun 1998

4730-14-527-4056
Tube To Boss Straight Adapter

145274056
N102866B: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-508-9038
Straight Tubing Connector

145089038
G102074A: RNCC: 3 | RNVC: 2

7 Oct 1998

4730-14-350-9200

4730-14-286-3081

4730-14-325-9564

4730-14-566-6960
Fluid Pressure Line Multiple Connector

145666960
8097552: RNCC: 3 | RNVC: 2

7 Dec 2010

4730-14-328-0365

4730-14-215-9739
Siphon

142159739
532: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-342-8892

4730-14-338-0851

4730-14-341-5317

4730-14-315-1087
Demi Manchon-Union

143151087
C0E429F5: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-306-7583
Bride A Zinc

143067583
000MA0782F4REP2DN32: RNCC: 3 | RNVC: 2
000MA782F4REP2DN32: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-559-5510
Tube-Hose Fitting Compression Sleeve

145595510
D15L C: RNCC: 3 | RNVC: 2
DPR15L-INOX: RNCC: 5 | RNVC: 2

23 Jan 2009

4730-14-556-4496
Hose Tee

145564496
31041000: RNCC: 3 | RNVC: 2
91878170: RNCC: 5 | RNVC: 2
182-5226: RNCC: 5 | RNVC: 2
745252: RNCC: 5 | RNVC: 2
FS0002469: RNCC: 6 | RNVC: 9

10 Mar 2008

4730-14-566-9340
Tube Coupling

145669340
BESS20SR1/2EDZB: RNCC: 3 | RNVC: 2
A231004000625: RNCC: 5 | RNVC: 2

18 Jan 2011

4730-14-271-8262
Tube Tee

142718262
NO PRIMARY REF14-271-8262: RNCC: 3 | RNVC: 2
TE30-22X18X18: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-320-8673
Tube To Boss Straight Adapter

143208673
A7-73010: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-452-1523
Tube To Boss Straight Adapter

144521523
A580-020: RNCC: 3 | RNVC: 2

18 Dec 1991

4730-14-220-6515
Tube Union

142206515
3808: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-296-7112

4730-14-438-4108
Quick Disconnect Coupling Half

144384108
31500473: RNCC: 3 | RNVC: 2

21 Mar 1990

4730-14-551-2025
Lubrication Fitting

145512025
9984907: RNCC: 3 | RNVC: 2

6 Sep 2006

4730-14-230-7164
Pipe Flange

142307164
GSM1487DET17: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-366-9352
Fluid Pressure Line Multiple Connector

143669352
003282080P: RNCC: 3 | RNVC: 2

11 Dec 1980

4730-14-411-6106
Lubrication Fitting

144116106
13408411: RNCC: 3 | RNVC: 9
13408411: RNCC: 5 | RNVC: 2
013408411: RNCC: 5 | RNVC: 9

27 Aug 1986

4730-14-414-2232
Pipe Expansion Joint

144142232
26042900400: RNCC: 3 | RNVC: 2
260429004: RNCC: 5 | RNVC: 9

26 Jan 1987

4730-14-505-1384
Tube To Boss Straight Adapter

145051384
310506: RNCC: 3 | RNVC: 2

11 Mar 1998

4730-14-544-6212
Tube To Boss Straight Adapter

145446212
0004752000: RNCC: 3 | RNVC: 2

14 Feb 2005

4730-14-407-6876
Sediment Strainer Body

144076876
3635-97: RNCC: 3 | RNVC: 2

27 Feb 1986

4730-14-543-8415
Tube To Boss Straight Adapter

145438415
560503142: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-333-6189
Tube Tee

143336189
R12SX6X12M: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-360-9855
Tube Tee

143609855
01030610: RNCC: 3 | RNVC: 2
1030610: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-387-5492
Pipe Flange

143875492
437254: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-454-9704
Tube Coupling

144549704
3465829: RNCC: 3 | RNVC: 2
5721040811: RNCC: 5 | RNVC: 2

30 Apr 1992

4730-14-388-4666
Fluid Pressure Line Multiple Connector

143884666
52230012500: RNCC: 3 | RNVC: 2
522300125: RNCC: 5 | RNVC: 2

3 Nov 1983

4730-14-407-5199
Pipe Flange

144075199
8098155: RNCC: 3 | RNVC: 2

27 Feb 1986

4730-14-377-2704
Tube Tee

143772704
74540: RNCC: 3 | RNVC: 2

17 May 1982

4730-14-391-7108
Tube To Boss Straight Adapter

143917108
742DGA08: RNCC: 3 | RNVC: 2
74742DGA08: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-547-9981
Tube Tee

145479981
5005130410: RNCC: 3 | RNVC: 2

2 Dec 2005

4730-14-366-8861
Fluid Pressure Line Multiple Connector

143668861
BP13394: RNCC: 3 | RNVC: 2

11 Dec 1980

4730-14-503-1143
Bulkhead Hose Connector

145031143
74525: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-245-7681
Raccord Special

142457681
1EDR8TF6CLZ1: RNCC: 3 | RNVC: 2
501005: RNCC: 5 | RNVC: 2
Q21-1EDR8-6CLZ1: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-273-5075
Tube To Boss Straight Adapter

142735075
7062BA1RCET1-30UA9: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-432-9899
Quick Disconnect Coupling Half

144329899
MR4-1906: RNCC: 3 | RNVC: 2
MR04-1906: RNCC: 5 | RNVC: 2
MRA04-1906: RNCC: 5 | RNVC: 2

5 Jul 1989

4730-14-438-0592
Tube Coupling

144380592
2-520336-4: RNCC: 3 | RNVC: 2
10-6003-142: RNCC: 5 | RNVC: 2
2-520336-4: RNCC: 5 | RNVC: 9
F300 0T 002 9863: RNCC: 6 | RNVC: 9

7 Mar 1990

4730-14-219-0541
Threaded Tube Fitting Plug

142190541
253-5M841P37A: RNCC: 3 | RNVC: 2
BR253-5M841P37A: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-390-5038
Tube Union

143905038
NO PRIMARY REF14-390-5038: RNCC: 3 | RNVC: 2
FBTXS6-1-4: RNCC: 5 | RNVC: 2

26 Jan 1984

4730-14-256-2053
Tube To Boss Straight Adapter

142562053
Q152-14-33X200NU: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-346-7118
Pipe-Tube Escutcheon

143467118
6784-1EB8A: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-350-1360
Pipe Flange

143501360
7062TC1F1F48-3UA9NFEM: RNCC: 2 | RNVC: 2
4730CE-48,3F: RNCC: 5 | RNVC: 2

14 Jun 1978

4730-14-264-9196
Tube Union

142649196
5204-12-12X17: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-387-1223
Tube To Boss Straight Adapter

143871223
89010667: RNCC: 3 | RNVC: 2
99-648-01-06-67: RNCC: 5 | RNVC: 2
99648010667: RNCC: 5 | RNVC: 2

24 Aug 1983

4730-14-465-7695
Pipeline Flexible Spacer

144657695
6110648000: RNCC: 3 | RNVC: 2
Z00.N7511290302: RNCC: 5 | RNVC: 2
611-064-8000: RNCC: 5 | RNVC: 9

14 Oct 1993

4730-14-458-5897
Pipe Fitting Flared Collar

144585897
89046-300: RNCC: 3 | RNVC: 2
RAR1580: RNCC: 5 | RNVC: 2
89046300: RNCC: 5 | RNVC: 2

27 Oct 1992

4730-14-209-9014
Sediment Strainer Element

142099014
53-444-012: RNCC: 3 | RNVC: 2
53444012: RNCC: 5 | RNVC: 2
0851943500: RNCC: 5 | RNVC: 2
53444: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-488-3320
Tube To Boss Straight Adapter

144883320
V4237585: RNCC: 3 | RNVC: 2
P42375-85V: RNCC: 5 | RNVC: 2
V42375-85: RNCC: 5 | RNVC: 2

30 Apr 1997

4730-14-209-1264
Raccord Orientable

142091264
NO PRIMARY REF14-209-1264: RNCC: 3 | RNVC: 2
211709: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-225-1485

4730-14-346-4106

4730-14-295-3410
Tube Tee

142953410
R6X8SX8: RNCC: 3 | RNVC: 2
RA6X8SX8: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-516-7432
Tube To Boss Straight Adapter

145167432
8304053: RNCC: 3 | RNVC: 2
A07050905: RNCC: 3 | RNVC: 2
Y00005950: RNCC: 3 | RNVC: 9
Y00005950: RNCC: 5 | RNVC: 9

13 Oct 1999

4730-14-284-6641
Tube To Boss Straight Adapter

142846641
050389: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-262-1465

4730-14-262-1456

4730-14-480-1483
Obturateur A Bride

144801483
K15721PH049AF40/0: RNCC: 3 | RNVC: 2

21 Feb 1996

4730-14-213-5797
Bouchon Special

142135797
A4014-10: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-279-7188

4730-14-414-6613
Tube Fitting Socket Welded Ferrule

144146613
4730HK-EME21,3X2: RNCC: 2 | RNVC: 2
MEC10473: RNCC: 3 | RNVC: 2

20 Feb 1987

4730-14-216-8245
Tube To Gas Fitting Straight Adapter

142168245
0000241037: RNCC: 3 | RNVC: 2
0000241037: RNCC: 5 | RNVC: 9
241037: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-340-8740
Tube To Boss Straight Adapter

143408740
9150167847: RNCC: 3 | RNVC: 2

14 Feb 1977

4730-14-274-1855
Tube To Boss Straight Adapter

142741855
DM55: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-225-7767
Bouchon Dejecteur

142257767
M7-5M31-7D29: RNCC: 3 | RNVC: 2
M7-5M31-7D29: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-374-3337
Sediment Strainer Body

143743337
288516: RNCC: 3 | RNVC: 2
85-691-6409: RNCC: 6 | RNVC: 9

8 Dec 1981

4730-14-489-5263
Sediment Strainer Element

144895263
0F/C25103921: RNCC: 3 | RNVC: 2
C25103921: RNCC: 5 | RNVC: 2

30 Jul 1997

4730-14-343-5281
Tube To Boss Straight Adapter

143435281
NO PRIMARY REF14-343-5281: RNCC: 3 | RNVC: 2
806082: RNCC: 5 | RNVC: 9
85-688-9778: RNCC: 6 | RNVC: 9

16 Jun 1977

4730-14-372-9513
Tube To Boss Straight Adapter

143729513
01011621: RNCC: 3 | RNVC: 2
1011621: RNCC: 5 | RNVC: 2
85-691-4005: RNCC: 6 | RNVC: 9

21 Sep 1981

4730-14-387-8472
Tube Coupling

143878472
NO PRIMARY REF14-387-8472: RNCC: 3 | RNVC: 2
0026-111DN40: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-376-3543
Tube Coupling

143763543
U1114F13-30CUPR0ALU: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-565-7863
Tube To Hose Elbow

145657863
5005330291: RNCC: 1 | RNVC: 2
3499-00-00-01: RNCC: 3 | RNVC: 2
25312645: RNCC: 5 | RNVC: 2

22 Sep 2010

4730-14-449-3494
Fluid Passage Bolt

144493494
3000-140: RNCC: 3 | RNVC: 2

7 Aug 1991

4730-14-508-5681
Tube To Boss Straight Adapter

145085681
Q1-5225-33X250: RNCC: 3 | RNVC: 2

16 Sep 1998

4730-14-406-7177
Tube To Boss Straight Adapter

144067177
GE6-6SMED: RNCC: 3 | RNVC: 2
GE6-6SMED: RNCC: 5 | RNVC: 2

8 Jan 1986

4730-14-376-7922
Quick Disconnect Coupling Half

143767922
NO PRIMARY REF14-376-7922: RNCC: 3 | RNVC: 2
B14DC2000-020: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-381-3128
Pipe Flange

143813128
NO PRIMARY REF14-381-3128: RNCC: 3 | RNVC: 2
10211400: RNCC: 5 | RNVC: 2
10211400: RNCC: 5 | RNVC: 2

25 Jan 1983

4730-14-427-9214
Tube Union

144279214
MAT164-0006F9: RNCC: 3 | RNVC: 2

23 Nov 1988

4730-14-563-8111
Quick Disconnect Coupling Half

145638111
VKA3/08LCF: RNCC: 3 | RNVC: 2
A231004000429: RNCC: 5 | RNVC: 2
90500039: RNCC: 5 | RNVC: 2
VKA3-08LCF: RNCC: 5 | RNVC: 2
5066337: RNCC: 5 | RNVC: 9

18 Mar 2010

4730-14-552-5903
Quick Disconnect Coupling Half

145525903
6501MPA001-S: RNCC: 3 | RNVC: 2

18 Jan 2007

4730-14-573-2093
Hose Coupling

145732093
RPD10R3/8: RNCC: 3 | RNVC: 2

21 Sep 2012

4730-14-405-4436
Tube Coupling

144054436
CB3A8 3/8: RNCC: 3 | RNVC: 9

27 Nov 1985

4730-14-415-2008
Tube Tee

144152008
4730HEEG048,3X2,6: RNCC: 2 | RNVC: 2
U1238F12DE48,3X2,6: RNCC: 5 | RNVC: 2

17 Apr 1987

4730-14-556-4472
Pipe Flange

145564472
2A 2 E EF 558300 001 2/5 DN25: RNCC: 3 | RNVC: 2

10 Mar 2008

4730-14-031-8189

4730-14-312-1513

4730-14-446-9864
Tube Tee

144469864
130-1-1 1/4-3/4: RNCC: 3 | RNVC: 2
130 1-1 1/4-3/4: RNCC: 5 | RNVC: 2
E29801B1FGE: RNCC: 5 | RNVC: 2

24 Apr 1991

4730-14-426-7398
Tube Tee

144267398
4730HEEG273X8,8: RNCC: 2 | RNVC: 2

20 Sep 1988

4730-14-448-5736
Tube Tee

144485736
R3BPL4/6-1/4: RNCC: 3 | RNVC: 2
R3BPL4/6-1/4: RNCC: 3 | RNVC: 9

2 Jul 1991

4730-14-328-1674
Tube To Boss Straight Adapter

143281674
174971: RNCC: 3 | RNVC: 2
89301842: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-486-3894
Tube Tee

144863894
0134151000: RNCC: 3 | RNVC: 2

12 Mar 1997

4730-14-342-4434
Fluid Pressure Line Multiple Connector

143424434
TH20M17: RNCC: 3 | RNVC: 2
004730: RNCC: 5 | RNVC: 2
4703: RNCC: 5 | RNVC: 2
004703: RNCC: 5 | RNVC: 2
MAS4703: RNCC: 5 | RNVC: 2

16 May 1977

4730-14-455-3650
Fluid Pressure Line Multiple Connector

144553650
5010028180: RNCC: 3 | RNVC: 2

21 May 1992

4730-14-436-6021
Bulkhead Hose Connector

144366021
DA2C205505511U1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-308-9003

4730-14-242-7953

4730-14-214-1705

4730-14-411-5430
Mamelon

144115430
520137: RNCC: 3 | RNVC: 2

20 Aug 1986

4730-14-218-9715
Raccord Special

142189715
S2502: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-348-0529
Raccord Embout

143480529
A77354: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-241-1165
Bouchon Special

142411165
A30717: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-295-5963
Corps De Raccord

142955963
17-5-2574: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-286-9703
Raccord

142869703
6114-5006: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-452-5635
Pipe Flange

144525635
LN320033F28DN150EXT152: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-551-5367
Fluid Passage Bolt

145515367
624964: RNCC: 3 | RNVC: 2

28 Sep 2006

4730-14-233-9596

4730-14-321-7598

4730-14-561-5501
Hose Clamp

145615501
TORRO 25-40/12 W4: RNCC: 3 | RNVC: 2
0136 7704 032: RNCC: 5 | RNVC: 2
136 7704 032: RNCC: 5 | RNVC: 2
ICE1240: RNCC: 5 | RNVC: 2

28 Jul 2009

4730-14-568-0883
Tube Elbow

145680883
NO PRIMARY REF 14-568-0883: RNCC: 3 | RNVC: 2
868.391: RNCC: 5 | RNVC: 2

6 May 2011

4730-14-392-8024

4730-14-572-3628
Flange To Tube Straight Adapter

145723628
M2821345200000: RNCC: 3 | RNVC: 2

28 Jun 2012

4730-14-465-7054
Tube Union

144657054
191108-2: RNCC: 3 | RNVC: 2
191108-2: RNCC: 5 | RNVC: 2

8 Oct 1993

4730-14-292-2287
Tube To Boss Straight Adapter

142922287
702A30-0905-20: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-304-4627
Fluid Pressure Line Multiple Connector

143044627
F721-005: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-359-3212
Quick Disconnect Coupling Assembly

143593212
SDS0-50BCD: RNCC: 3 | RNVC: 2

2 Oct 1979

4730-14-338-0814
Tube Coupling Assembly

143380814
0-3601H63A: RNCC: 3 | RNVC: 2
0-3601H63A: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-457-7065
Pipe Fitting Flared Collar

144577065
89031-300: RNCC: 3 | RNVC: 2
89031300: RNCC: 5 | RNVC: 2
RAR1549: RNCC: 5 | RNVC: 2

16 Sep 1992

4730-14-306-3014
Sediment Strainer Element

143063014
7551640380: RNCC: 3 | RNVC: 2
7551640380: RNCC: 3 | RNVC: 2
75516403: RNCC: 5 | RNVC: 2
AM222-6A: RNCC: 5 | RNVC: 2
75-516-403: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-423-1999
Tube To Hose Straight Adapter

144231999
EA 00704 78: RNCC: 3 | RNVC: 2
EA00704-78: RNCC: 5 | RNVC: 2
EA0070478: RNCC: 5 | RNVC: 2

9 Apr 1988

4730-14-390-0453
Tube To Boss Straight Adapter

143900453
053.869.000: RNCC: 3 | RNVC: 2
53-869-000: RNCC: 5 | RNVC: 9

26 Jan 1984

4730-14-348-4180
Chemise De Tiroir D

143484180
A0187-003F14: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-236-0169
Bouchon Filete

142360169
A70-24266: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-361-7090
Tube To Boss Straight Adapter

143617090
URAG27XG17NNU: RNCC: 3 | RNVC: 2
S00373-68: RNCC: 5 | RNVC: 2

20 Feb 1980

4730-14-387-8481
Tube Tee

143878481
NO PRIMARY REF14-387-8481: RNCC: 3 | RNVC: 2
0026-114DN20: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-292-4775
Fluid Pressure Line Multiple Connector

142924775
F530-10-02: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-383-6606
Pipe Flange

143836606
366A55-1030-21: RNCC: 3 | RNVC: 2

11 Apr 1983

4730-14-426-7932
Tube Tee

144267932
4730HEING114,3X17,5-88,9X16: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-405-4424
Tube Coupling

144054424
CB2A14 1/2: RNCC: 3 | RNVC: 9

27 Nov 1985

4730-14-433-3700
Hose To Gas Fitting Straight Adapter

144333700
DLT603731: RNCC: 3 | RNVC: 2
DLT565179EREP25DFOLIO2-1/3: RNCC: 5 | RNVC: 2

24 Jul 1989

4730-14-460-7687
Quick Disconnect Coupling Half

144607687
693 120 011 069: RNCC: 3 | RNVC: 2
H 87854 6X9: RNCC: 5 | RNVC: 2

9 Feb 1993

4730-14-225-4661
Bouchon De Robinet

142254661
NO PRIMARY REF14-225-4661: RNCC: 3 | RNVC: 2
1101008: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-498-5623
Tube To Boss Straight Adapter

144985623
PAA58-13-001: RNCC: 3 | RNVC: 2
PAA5813001: RNCC: 3 | RNVC: 2
F300 0T 005 7223: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-500-6285
Swivel Flange To Hose Straight Adapter

145006285
GFS36-42-L0MDA3C: RNCC: 3 | RNVC: 2
GFS36-42L0MDA3C: RNCC: 5 | RNVC: 2
F300 0T 024 6471: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-268-8855
Tube Tee

142688855
631X6102: RNCC: 3 | RNVC: 2
T1-44B631X6102: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-473-0695
Manchette Equipee

144730695
MAT553-0001: RNCC: 3 | RNVC: 2

7 Dec 1994

4730-14-426-7781
Tube Tee

144267781
4730HEING076,1X10-48,3X7,1: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-510-3412
Sediment Strainer Element

145103412
CREPINEAPERFORATION0-8: RNCC: 3 | RNVC: 2
4730AA8021255: RNCC: 6 | RNVC: 9

4 Nov 1998

4730-14-217-3597
Tube Tee

142173597
5-3951S50X50X40P6A: RNCC: 3 | RNVC: 2
300651: RNCC: 5 | RNVC: 9
5-3951S50X50X40P6A: RNCC: 5 | RNVC: 9
S300651: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-428-5108
Fluid Pressure Line Multiple Connector

144285108
P432B25: RNCC: 3 | RNVC: 2
732.B.25: RNCC: 3 | RNVC: 2
74732B25: RNCC: 5 | RNVC: 2
74732B25: RNCC: 5 | RNVC: 2
732 B 25: RNCC: 5 | RNVC: 2
732B25: RNCC: 5 | RNVC: 2
164887: RNCC: 5 | RNVC: 2

8 Dec 1988

4730-14-434-3324
Calibre Diaphragme

144343324
OUT50365-3: RNCC: 3 | RNVC: 2
0UT50365-3: RNCC: 5 | RNVC: 2

20 Sep 1989

4730-14-402-0088
Tube Tee

144020088
271521: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-530-0252
Tube To Boss Straight Adapter

145300252
10607726: RNCC: 3 | RNVC: 2

30 Apr 2002

4730-14-374-6885
Tube To Boss Straight Adapter

143746885
1DDR10X8NU: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-545-5219
Lubrication Fitting

145455219
669301: RNCC: 3 | RNVC: 2
91830914: RNCC: 5 | RNVC: 2

18 Apr 2005

4730-14-547-1795
Tube Coupling

145471795
98101401: RNCC: 3 | RNVC: 2
5005430261: RNCC: 5 | RNVC: 2

3 Oct 2005

4730-14-537-8414
Quick Disconnect Coupling Half

145378414
1022-120: RNCC: 3 | RNVC: 2
622117: RNCC: 5 | RNVC: 2

27 Nov 2003

4730-14-401-8305
Pipeline Flexible Spacer

144018305
KLEDIL32CC: RNCC: 3 | RNVC: 2
KLEDIL32CC: RNCC: 3 | RNVC: 9

13 Jun 1985

4730-14-534-7265
Tube To Boss Straight Adapter

145347265
10647832: RNCC: 3 | RNVC: 2

2 Apr 2003

4730-14-537-0443
Special-Shaped Hose Clamp

145370443
CFCD1 25 110 W1: RNCC: 3 | RNVC: 2

24 Sep 2003

4730-14-408-4498
Tube To Boss Straight Adapter

144084498
LW110-NC2531S: RNCC: 3 | RNVC: 2
8401258747NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-538-8625
Tube Coupling Assembly

145388625
NGM0021040400500: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-211-4090
Tube To Boss Straight Adapter

142114090
29323: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-376-7941
Tube To Boss Straight Adapter

143767941
89089900104159A: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-417-6578
Pipe Elbow Assembly

144176578
230992: RNCC: 3 | RNVC: 2

22 Jul 1987

4730-14-347-8179
Sediment Strainer Element

143478179
01000115A05300: RNCC: 3 | RNVC: 2
01000115A05300: RNCC: 3 | RNVC: 9
10-300-61: RNCC: 5 | RNVC: 9
71000115A05300: RNCC: 5 | RNVC: 9
71000615A05300: RNCC: 5 | RNVC: 9

1 Mar 1978

4730-14-250-9544
Fluid Pressure Line Multiple Connector

142509544
81709: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-526-5790
Pipe Clamp Coupling

145265790
9002DAG4115: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-492-0061
Tube To Boss Straight Adapter

144920061
4226: RNCC: 3 | RNVC: 2
F300 0T 006 6964: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-435-1361
Tube-Hose Fitting Compression Sleeve

144351361
0124100040: RNCC: 3 | RNVC: 2

23 Oct 1989

4730-14-415-8789
Pipe Expansion Joint

144158789
75458005300: RNCC: 3 | RNVC: 2
754580053: RNCC: 5 | RNVC: 9

21 May 1987

4730-14-202-5289
Tube Tee

142025289
R6X8X10: RNCC: 3 | RNVC: 2
R14054: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-434-1797
Tuyaut Protec Gaine

144341797
552873: RNCC: 3 | RNVC: 2

11 Sep 1989

4730-14-359-8766
Bride Later Arr Bbd

143598766
2-16449: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-245-9046
Distributeur Huit V

142459046
NU804: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-255-6011

4730-14-278-8096

4730-14-307-2508

4730-14-374-1161
Bulkhead Hose Connector

143741161
WETXWLNS8: RNCC: 3 | RNVC: 2
4730-AA-1087414: RNCC: 6 | RNVC: 9

8 Dec 1981

4730-14-522-7436
Swivel Flange To Hose Straight Adapter

145227436
80-301096: RNCC: 3 | RNVC: 2

17 Nov 2000

4730-14-364-4108
Tube To Boss Straight Adapter

143644108
RMT41-14: RNCC: 3 | RNVC: 2
99050280: RNCC: 5 | RNVC: 2
RMT41-14-260025: RNCC: 5 | RNVC: 2
99050280: RNCC: 5 | RNVC: 9
99050280: RNCC: 5 | RNVC: 9

7 Aug 1980

4730-14-500-2416
Tube To Boss Straight Adapter

145002416
4A12L/12-17CONU: RNCC: 3 | RNVC: 2
AX81103300: RNCC: 5 | RNVC: 2
5005030892: RNCC: 5 | RNVC: 2
5005030892: RNCC: 6 | RNVC: 9
F300 0T 024 2436: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-334-2555
Tube Tee

143342555
GSM163-017F58: RNCC: 3 | RNVC: 2
GSM163-17F58: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-476-4567
Fluid Flow Restrictor

144764567
A88058: RNCC: 3 | RNVC: 2
85-695-2365: RNCC: 6 | RNVC: 9

14 Jun 1995

4730-14-568-3760
Pipeline Flexible Spacer

145683760
A1/600/KG310-WGPN10/E: RNCC: 3 | RNVC: 2

26 May 2011

4730-14-286-9729
Buse Equipee

142869729
6114-3361: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-414-9360
Amortisseur De Pres

144149360
16558946: RNCC: 3 | RNVC: 2
16558946: RNCC: 5 | RNVC: 9

26 Mar 1987

4730-14-221-8782

4730-14-349-1084

4730-14-365-2885

4730-14-234-6265
Buse Speciale

142346265
S11844DB: RNCC: 3 | RNVC: 2
S11844: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-525-2544
Return Tube Bend

145252544
E69605000000: RNCC: 3 | RNVC: 2

23 May 2001

4730-14-233-6878

4730-14-565-3699
Tube To Boss Straight Adapter

145653699
GE16SM18X1,5EDOMDCF: RNCC: 3 | RNVC: 2
A231004000278: RNCC: 5 | RNVC: 2

11 Aug 2010

4730-14-376-9285

4730-14-334-3253
Tube To Boss Straight Adapter

143343253
C12-17-12-17C0: RNCC: 3 | RNVC: 2
HAG17-12-17C0: RNCC: 5 | RNVC: 2
MCG17: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-455-1967
Quick Disconnect Elbow

144551967
3236331: RNCC: 3 | RNVC: 2
H29-6418-002/16: RNCC: 5 | RNVC: 2

7 May 1992

4730-14-328-4677
Tube To Boss Straight Adapter

143284677
GSM514-001F4: RNCC: 3 | RNVC: 2
A0210-004F4: RNCC: 5 | RNVC: 2
GSM514-01F4: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-236-8656
Fluid Passage Bolt

142368656
321A75-0816-20: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-255-8499
Bouchon De Rempliss

142558499
321B14: RNCC: 3 | RNVC: 2
321B14: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-489-8645
Hydraulic Manifold Assembly

144898645
COLLE92324X00: RNCC: 3 | RNVC: 2

27 Aug 1997

4730-14-535-2077
Tube To Boss Straight Adapter

145352077
0254959500: RNCC: 3 | RNVC: 2

14 May 2003

Load More Results