What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 144 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 144 of 185

4730-14-573-4253
Hose Cap

145734253
MB-0219-A: RNCC: 3 | RNVC: 2

11 Oct 2012

4730-14-367-4164
Tube To Boss Straight Adapter

143674164
15167843: RNCC: 3 | RNVC: 2
15167843: RNCC: 5 | RNVC: 2
15167843: RNCC: 5 | RNVC: 9

11 Dec 1980

4730-14-540-3931
Fluid Passage Bolt

145403931
231469: RNCC: 3 | RNVC: 2

23 Mar 2004

4730-14-464-5527
Check Valve Adapter

144645527
305214: RNCC: 3 | RNVC: 9

9 Aug 1993

4730-14-042-3582
Bulkhead Hose Connector

140423582
R8612: RNCC: 3 | RNVC: 2

16 Jun 1977

4730-14-532-3592
Flange To Boss Straight Adapter

145323592
RA1M210108281N1: RNCC: 3 | RNVC: 2

30 Oct 2002

4730-14-406-1452
Tube Coupling

144061452
H102269: RNCC: 3 | RNVC: 2
H102269: RNCC: 6 | RNVC: 9

8 Jan 1986

4730-14-389-6491
Quick Disconnect Coupling Assembly

143896491
LP012WR021: RNCC: 3 | RNVC: 9

20 Dec 1983

4730-14-453-7249
Lubrication Fitting

144537249
7010000: RNCC: 3 | RNVC: 2
ALG7010000: RNCC: 5 | RNVC: 9

5 Mar 1992

4730-14-492-1978
Tube To Boss Straight Adapter

144921978
0000668738: RNCC: 3 | RNVC: 2
F300 0T 007 1508: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-289-7690
Quick Disconnect Coupling Half

142897690
15066154: RNCC: 3 | RNVC: 2
96092302: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-294-0677
Quick Disconnect Coupling Half

142940677
E29572B80BZ: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-377-1876
Fluid Pressure Line Multiple Connector

143771876
219886: RNCC: 3 | RNVC: 2

17 May 1982

4730-14-441-1312
Tube Union

144411312
91713047: RNCC: 1 | RNVC: 2
URSI8-6: RNCC: 3 | RNVC: 9

22 Aug 1990

4730-14-559-3506
Tube To Hose Straight Adapter

145593506
E66501630008: RNCC: 3 | RNVC: 2

19 Dec 2008

4730-14-371-0506

4730-14-429-0187
Buse Ejecteur

144290187
3/130/5/00041-3A: RNCC: 3 | RNVC: 2

4 Jan 1989

4730-14-410-9820
Tube To Boss Straight Adapter

144109820
ORK10X8-13N: RNCC: 3 | RNVC: 2
Q1-5204JC10-8-13CYL: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-512-1429
Quick Disconnect Coupling Half

145121429
RBE06-1810/OD/IC/4,5/JE: RNCC: 3 | RNVC: 2
91711242: RNCC: 5 | RNVC: 2
91711242: RNCC: 5 | RNVC: 2

4 Feb 1999

4730-14-537-2419
Tube Union

145372419
2405 G17 708 L: RNCC: 3 | RNVC: 2

15 Oct 2003

4730-14-395-6355
Self-Sealing Coupling Half

143956355
RBE3-71500DIAHPJV: RNCC: 3 | RNVC: 2
RBE3-7150HPJV1A0D: RNCC: 5 | RNVC: 2

30 Oct 1984

4730-14-293-1114
Fluid Pressure Line Multiple Connector

142931114
509-10-8X13: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-351-8452
Tube To Boss Straight Adapter

143518452
AML14-18X150: RNCC: 3 | RNVC: 2
AL14-18X150: RNCC: 5 | RNVC: 2

16 Oct 1978

4730-14-346-7116
Pipe Flange

143467116
6784-1EA114-3: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-306-7582
Bride A Zinc

143067582
000MA0782F4REP1DN32: RNCC: 3 | RNVC: 2
000MA782F4REP1DN32: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-336-9498
Fluid Pressure Line Multiple Connector

143369498
NO PRIMARY REF14-336-9498: RNCC: 3 | RNVC: 2
39303: RNCC: 5 | RNVC: 9

7 Oct 1976

4730-14-209-1261
Raccord Orientable

142091261
NO PRIMARY REF14-209-1261: RNCC: 3 | RNVC: 2
215350: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-206-3166
Tube To Boss Straight Adapter

142063166
0000350831: RNCC: 3 | RNVC: 2
350831: RNCC: 5 | RNVC: 9
0000350831: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-409-4741
Hose To Boss Straight Adapter

144094741
19300362: RNCC: 3 | RNVC: 2
5171713500: RNCC: 5 | RNVC: 2
19300362: RNCC: 5 | RNVC: 9
24030M42X2XC38: RNCC: 5 | RNVC: 9

28 May 1986

4730-14-382-9856
Tube To Boss Straight Adapter

143829856
005272083P: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-220-0139
Tube To Boss Straight Adapter

142200139
11733600: RNCC: 3 | RNVC: 2
117336: RNCC: 5 | RNVC: 2
062720469: RNCC: 5 | RNVC: 9
720469: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-410-9880
Tube To Boss Straight Adapter

144109880
91012185: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-516-4872
Fluid Pressure Line Multiple Connector

145164872
L11373: RNCC: 3 | RNVC: 2

29 Sep 1999

4730-14-409-1059
Sediment Strainer Element

144091059
640467: RNCC: 3 | RNVC: 2

16 Apr 1986

4730-14-404-4039
Tube Fitting Brazing Ferrule

144044039
D32: RNCC: 3 | RNVC: 2

30 Oct 1985

4730-14-436-7055
Bulkhead Hose Connector

144367055
DA2C203503511U1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-383-0698
Tube To Boss Straight Adapter

143830698
18799: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-412-2257
Fluid Pressure Line Multiple Connector

144122257
0301527390: RNCC: 3 | RNVC: 2

8 Oct 1986

4730-14-412-8368
Hose To Boss Straight Adapter

144128368
1612540008: RNCC: 3 | RNVC: 2
16125400: RNCC: 5 | RNVC: 2

5 Nov 1986

4730-14-493-0606
Tube To Boss Straight Adapter

144930606
3565419MI: RNCC: 3 | RNVC: 2
F300 0T 009 7796: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-462-4049
Pipe To Gas Fitting Straight Adapter

144624049
800554: RNCC: 3 | RNVC: 2

15 Apr 1993

4730-14-206-3168
Tube To Boss Straight Adapter

142063168
0000456994: RNCC: 3 | RNVC: 2
0000456994: RNCC: 5 | RNVC: 9
456994: RNCC: 5 | RNVC: 9
456994NU: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-509-6756
Bulkhead Hose Connector

145096756
RA1M534709171: RNCC: 3 | RNVC: 2

28 Oct 1998

4730-14-504-5933
Tube To Hose Straight Adapter

145045933
01667001: RNCC: 3 | RNVC: 2

25 Feb 1998

4730-14-474-6874
Quick Disconnect Coupling Half

144746874
LN320001DN40REP2TYPEA1: RNCC: 3 | RNVC: 2

24 Feb 1995

4730-14-220-6141
Tube Tee

142206141
R25X32X25: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-220-6135
Tube Tee

142206135
R121012: RNCC: 3 | RNVC: 2
R12X10X12: RNCC: 5 | RNVC: 2
R14090: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-504-7032
Return Tube Bend

145047032
34020800: RNCC: 3 | RNVC: 2
5005330178: RNCC: 3 | RNVC: 2

27 Feb 1998

4730-14-382-5672
Pipe Flange

143825672
20068465: RNCC: 3 | RNVC: 2
20068465: RNCC: 5 | RNVC: 9

17 Feb 1983

4730-14-274-2976
Sediment Strainer Element

142742976
101460: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-040-0052
Fluid Passage Bolt

140400052
0000250810: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-325-6799
Bulkhead Hose Connector

143256799
0000365000: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-032-1919
Pipe Flange

140321919
20E4003REP5DN125: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-329-2202
Fluid Pressure Line Multiple Connector

143292202
F10A740004001: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-472-3401
Anchor And Reinforcement Pipe Clamp

144723401
13139: RNCC: 3 | RNVC: 2

19 Oct 1994

4730-14-410-9813
Tube To Boss Straight Adapter

144109813
8401258766: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-527-3723
Tube To Boss Straight Adapter

145273723
H102874T: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-514-7711
Pipeline Flexible Spacer

145147711
203593: RNCC: 3 | RNVC: 2

16 Jun 1999

4730-14-371-1612
Bulkhead Hose Connector

143711612
523924: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-232-6236
Tube Tee

142326236
R20X10X20: RNCC: 3 | RNVC: 2
R14108: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-365-8172
Pipe Flange

143658172
16509876: RNCC: 3 | RNVC: 2
16509876: RNCC: 5 | RNVC: 9

8 Oct 1980

4730-14-307-3915
Tube To Boss Straight Adapter

143073915
DLT047565: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-482-1241
Flange To Hose Straight Adapter

144821241
23 43 58: RNCC: 3 | RNVC: 2

20 Jun 1996

4730-14-545-8005
Tube Coupling

145458005
10341040: RNCC: 3 | RNVC: 2

16 May 2005

4730-14-515-4407
Tube To Boss Straight Adapter

145154407
FJ78M12BSPT: RNCC: 3 | RNVC: 2
SOAFJ78M12BSPT: RNCC: 5 | RNVC: 9

13 Jul 1999

4730-14-376-7604
Fluid Passage Bolt

143767604
52S1002505: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-307-3933
Fluid Pressure Line Multiple Connector

143073933
DLT048062: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-361-7040
Tube Tee

143617040
TRAG27XG34XG27NNU: RNCC: 3 | RNVC: 2
G00372-66: RNCC: 5 | RNVC: 2

20 Feb 1980

4730-14-371-3286
Sediment Strainer Element

143713286
CS4-50R0-170: RNCC: 3 | RNVC: 2
209510: RNCC: 5 | RNVC: 2
J14432-12: RNCC: 5 | RNVC: 2
J14432-12: RNCC: 5 | RNVC: 2

5 Aug 1981

4730-14-317-9366
Fluid Pressure Line Multiple Connector

143179366
341A75-2007-01: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-483-6104
Quick-Disconnect Nipple

144836104
702A30-0451-20: RNCC: 3 | RNVC: 2

24 Sep 1996

4730-14-212-1244
Pipe Flange

142121244
4730BX-273: RNCC: 2 | RNVC: 2
7068FDN273B12S: RNCC: 3 | RNVC: 2

5 Jul 1980

4730-14-387-3669
Bulkhead Hose Connector

143873669
0294201510: RNCC: 3 | RNVC: 2
302-255-001P: RNCC: 5 | RNVC: 2

15 Sep 1983

4730-14-346-7023
Pipe Flange

143467023
6784-1CH14-10A: RNCC: 2 | RNVC: 2
MEC11350: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-448-9856

4730-14-310-8843

4730-14-278-2093

4730-14-489-9711
Tube Coupling

144899711
25641777: RNCC: 3 | RNVC: 2
2-564177-7: RNCC: 5 | RNVC: 2

3 Sep 1997

4730-14-344-4674
Fluid Pressure Line Multiple Connector

143444674
EA1M712-013: RNCC: 3 | RNVC: 2

10 Aug 1977

4730-14-416-3301
Pipe Flange

144163301
E29203-01A-PN10DN200Z2CND17-12: RNCC: 2 | RNVC: 2

3 Jun 1987

4730-14-353-1177
Tube To Boss Straight Adapter

143531177
RC55-37: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-221-9754
Bouchon Superieur

142219754
NO PRIMARY REF14-221-9754: RNCC: 3 | RNVC: 2
291M291313: RNCC: 5 | RNVC: 9
M291313: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-511-1038
Tube Coupling

145111038
RP-10: RNCC: 3 | RNVC: 2
RP-10: RNCC: 3 | RNVC: 2

2 Dec 1998

4730-14-549-0761
Flange To Hose Elbow

145490761
78841-003: RNCC: 3 | RNVC: 2

2 Mar 2006

4730-14-493-3023
Fluid Passage Bolt

144933023
H0R1-4A3C: RNCC: 3 | RNVC: 2
F300 0T 012 1555: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-292-2291
Raccord Special

142922291
702A30-1307-20: RNCC: 3 | RNVC: 2

21 Feb 1996

4730-14-561-7165
Flange To Hose Straight Adapter

145617165
H1243610-081200: RNCC: 3 | RNVC: 2

25 Aug 2009

4730-14-547-1497
Tube Fitting Locknut

145471497
3348: RNCC: 3 | RNVC: 2

28 Sep 2005

4730-14-259-7210
Agrafe

142597210
6: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-309-8873
Tube Coupling Assembly

143098873
3901P32A: RNCC: 3 | RNVC: 2
3901P32A: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-503-2050
Tube Coupling

145032050
RA1M504950066: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-436-6018
Bulkhead Hose Connector

144366018
DA2C205503710: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-340-1270
Tube To Boss Straight Adapter

143401270
1051013: RNCC: 3 | RNVC: 2

18 Jan 1977

4730-14-345-0575
Fluid Pressure Line Multiple Connector

143450575
113476: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-547-4337
Return Tube Bend

145474337
7700314955: RNCC: 3 | RNVC: 2

13 Oct 2005

4730-14-541-0046
Fluid Pressure Line Multiple Connector

145410046
6501COD133: RNCC: 3 | RNVC: 2

5 May 2004

4730-14-415-0577
Sediment Strainer Element

144150577
3115DN25REP6: RNCC: 3 | RNVC: 2

26 Mar 1987

4730-14-311-8444
Pipe Flange

143118444
0064490320: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-375-8133
Fluid Pressure Line Multiple Connector

143758133
16293276: RNCC: 3 | RNVC: 2
16293276: RNCC: 5 | RNVC: 9

30 Mar 1982

4730-14-325-6770
Bulkhead Hose Connector

143256770
0000363950: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-376-7626
Tube To Boss Straight Adapter

143767626
23S06053: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-429-2157
Fluid Pressure Line Multiple Connector

144292157
6T18SM6KDV01: RNCC: 3 | RNVC: 2

11 Jan 1989

4730-14-529-0392
Tube To Boss Straight Adapter

145290392
81540660: RNCC: 3 | RNVC: 2

6 Mar 2002

4730-14-379-9311
Tube To Boss Straight Adapter

143799311
8114: RNCC: 3 | RNVC: 9

20 Oct 1982

4730-14-484-8007
Quick Disconnect Coupling Half

144848007
96182765: RNCC: 3 | RNVC: 2
96182765: RNCC: 5 | RNVC: 2

5 Dec 1996

4730-14-339-9371
Tube To Boss Straight Adapter

143399371
R33244SMCREP21: RNCC: 3 | RNVC: 2

18 Jan 1977

4730-14-493-1843
Tube To Boss Straight Adapter

144931843
431399: RNCC: 3 | RNVC: 2
F300 0T 011 0175: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-408-3672
Hose To Boss Straight Adapter

144083672
TTA04INOX316LEFAL6: RNCC: 3 | RNVC: 9
1355: RNCC: 5 | RNVC: 9

19 Mar 1986

4730-14-513-4882
Tube Coupling Inverted Nut

145134882
3241002: RNCC: 3 | RNVC: 2

19 Mar 1999

4730-14-563-8345
Self-Sealing Coupling Assembly

145638345
SKK 12-8-VS: RNCC: 3 | RNVC: 2
719741: RNCC: 5 | RNVC: 2
9648154480: RNCC: 5 | RNVC: 9

22 Mar 2010

4730-14-225-0600

4730-14-264-1582

4730-14-297-8832
Barillet De Raccord

142978832
411MA0344REP1-3A5: RNCC: 3 | RNVC: 2
411MA344REP1-3A5: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-395-2692
Tube To Boss Straight Adapter

143952692
GSM524-042F2: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-526-7908
Fluid Passage Bolt

145267908
43312AG100Z: RNCC: 2 | RNVC: 2
L43312-100AGZ: RNCC: 5 | RNVC: 2

5 Sep 2001

4730-14-208-4957
Raccord A Passage P

142084957
059044: RNCC: 3 | RNVC: 2
M059044: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-347-4652
Tube Union

143474652
A11A522360401: RNCC: 3 | RNVC: 2

1 Mar 1978

4730-14-504-5273
Special-Shaped Hose Clamp

145045273
1820363C91: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-456-7073
Tube Fitting Brazing Ferrule

144567073
K303711: RNCC: 3 | RNVC: 2

24 Jul 1992

4730-14-432-2554
Tube Repair Plug

144322554
NCHX01H013EF5REP15TAMPON: RNCC: 3 | RNVC: 2
NCHX01H013DF5REP15TAMPON: RNCC: 5 | RNVC: 2

31 May 1989

4730-14-399-9863
Fluid Pressure Line Multiple Connector

143999863
603676: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-406-7522
Quick Disconnect Coupling Half

144067522
AMDN80BRONZE-BUNA: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-393-9145
Self-Sealing Coupling Half

143939145
434F02: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-377-6541
Tube To Boss Straight Adapter

143776541
SBE4: RNCC: 3 | RNVC: 2

6 Jun 1996

4730-14-416-3265
Tube To Boss Straight Adapter

144163265
LV117-NS3012S: RNCC: 3 | RNVC: 2
84053027NU: RNCC: 5 | RNVC: 2

3 Jun 1987

4730-14-362-8272
Tube To Boss Straight Adapter

143628272
12-15-18X150: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-388-4983
Lubrication Fitting

143884983
28261STD: RNCC: 3 | RNVC: 9

3 Nov 1983

4730-14-321-9140
Bulkhead Hose Connector

143219140
441MA0090: RNCC: 3 | RNVC: 2
441MA090: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-378-4956
Fluid Pressure Line Multiple Connector

143784956
108120000701: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-578-7446
Spraying Nozzle

145787446
460.406.17.CA: RNCC: 3 | RNVC: 2

6 Jan 2014

4730-14-552-1065
Pipe To Gas Fitting Straight Adapter

145521065
8090603: RNCC: 3 | RNVC: 2
360A302: RNCC: 5 | RNVC: 2

27 Nov 2006

4730-14-512-9257
Tube Union

145129257
74356: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-210-9727
Tube Fitting Clinch Sleeve

142109727
1A30: RNCC: 3 | RNVC: 2
BE30: RNCC: 3 | RNVC: 2
205-30: RNCC: 3 | RNVC: 2
DA30N: RNCC: 3 | RNVC: 2
121217: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-497-4739
Water Distribution Nozzle

144974739
F25410: RNCC: 3 | RNVC: 2
F300 0T 023 2381: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-553-6167
Tube Tee

145536167
930 135 010: RNCC: 3 | RNVC: 2
TA6L: RNCC: 3 | RNVC: 2

24 Apr 2007

4730-14-414-1112
Tube Coupling

144141112
37257: RNCC: 3 | RNVC: 2

22 Jan 1987

4730-14-347-2869
Tube To Boss Straight Adapter

143472869
99011321: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-273-5135

4730-14-274-5332

4730-14-260-9241

4730-14-436-1250
Pipe Flange

144361250
J05150-04-0500P018: RNCC: 3 | RNVC: 2

6 Dec 1989

4730-14-468-2580
Pipeline Flexible Spacer

144682580
30339-13: RNCC: 3 | RNVC: 2

16 Feb 1994

4730-14-269-2081
Pipe Flange

142692081
7066EE1F108: RNCC: 2 | RNVC: 2
4730BJ-108F: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-398-5836
Tube Tee

143985836
GSM164-050F5: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-405-3794
Tube Tee

144053794
TORSA30X33-200N: RNCC: 3 | RNVC: 2
LW380CS3033N: RNCC: 5 | RNVC: 2

27 Nov 1985

4730-14-357-1420
Tube To Boss Straight Adapter

143571420
R12-10-12X17: RNCC: 3 | RNVC: 2

7 Jun 1979

4730-14-498-4876
Tube To Boss Straight Adapter

144984876
6A15-22-150NU: RNCC: 3 | RNVC: 2
91971036: RNCC: 3 | RNVC: 2
F300 0T 005 2900: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-432-7007
Tube Coupling

144327007
160H732440-12: RNCC: 3 | RNVC: 2

21 Jun 1989

4730-14-231-0897
Tube-Hose Fitting Compression Sleeve

142310897
R5120: RNCC: 3 | RNVC: 2
84406-20: RNCC: 5 | RNVC: 2
91313457: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-514-5290
Tube To Boss Straight Adapter

145145290
147-06D: RNCC: 3 | RNVC: 2

26 May 1999

4730-14-329-1301
Quick Disconnect Plug

143291301
NO PRIMARY REF14-329-1301: RNCC: 3 | RNVC: 2
34-65X70: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-456-7548
Pipe Flange

144567548
A65108-20R5: RNCC: 3 | RNVC: 2

24 Jul 1992

4730-14-310-3447
Tube To Boss Straight Adapter

143103447
PQ6-00-05-75: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-394-0485
Fluid Pressure Line Multiple Connector

143940485
SK10-20954: RNCC: 3 | RNVC: 2
85-692-5917: RNCC: 6 | RNVC: 9

23 Jun 1984

4730-14-339-9878
Bulkhead Hose Connector

143399878
GSM425-025F20: RNCC: 3 | RNVC: 2
A0009-033F20: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-303-5922
Tube Coupling

143035922
NO PRIMARY REF14-303-5922: RNCC: 3 | RNVC: 2
91489105: RNCC: 5 | RNVC: 2
5251-300: RNCC: 5 | RNVC: 9
RT6BNAE: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-406-9814
Tube To Boss Straight Adapter

144069814
GSM164-058F12: RNCC: 3 | RNVC: 2

22 Jan 1986

4730-14-339-1760
Tube-Hose Fitting Compression Sleeve

143391760
NO PRIMARY REF14-339-1760: RNCC: 3 | RNVC: 2
0400431330: RNCC: 5 | RNVC: 2
9560112670: RNCC: 5 | RNVC: 2
150: RNCC: 5 | RNVC: 9
54373: RNCC: 5 | RNVC: 9

17 Dec 1976

4730-14-268-5080
Return Tube Bend

142685080
A49182C76-1ASJ: RNCC: 2 | RNVC: 2
3D180-76-1MM: RNCC: 3 | RNVC: 2
3D180-76-1MM: RNCC: 3 | RNVC: 2
E29-044-76-1MM180: RNCC: 5 | RNVC: 2
3D180-76-1MM: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-386-4234
Tube To Boss Straight Adapter

143864234
UML10-14X150: RNCC: 3 | RNVC: 9

24 Aug 1983

4730-14-408-4391
Tube To Boss Straight Adapter

144084391
4730AJ4.3DN8NU: RNCC: 2 | RNVC: 2
8901081366NU: RNCC: 3 | RNVC: 2
MEC10809: RNCC: 3 | RNVC: 2

27 Mar 1986

4730-14-232-9047
Fluid Pressure Line Multiple Connector

142329047
0000300390: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-362-3041
Sediment Strainer Element

143623041
053992: RNCC: 3 | RNVC: 9

20 Feb 1980

4730-14-462-7155
Tube To Boss Straight Adapter

144627155
SBE1122: RNCC: 3 | RNVC: 2

28 Apr 1993

4730-14-307-3978
Swivel Retaining Pipe Flange

143073978
DLT049720: RNCC: 3 | RNVC: 2
DLT49720: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-432-4441
Tube Coupling

144324441
X519385: RNCC: 3 | RNVC: 2

13 Jun 1989

4730-14-313-7571
Pipe Flange

143137571
0074720050: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-308-0253
Tube To Boss Straight Adapter

143080253
C60518: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-526-4717
Fluid Pressure Line Multiple Connector

145264717
RP1A741214701: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-452-5584
Pipe Flange

144525584
LN320033F26DN32: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-494-0880
Tube Tee

144940880
202369900560: RNCC: 3 | RNVC: 2
F300 0T 015 4240: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-494-0997
Tube To Hose Straight Adapter

144940997
202356201100: RNCC: 3 | RNVC: 2
F300 0T 015 4610: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-544-6150
Water Distribution Nozzle

145446150
10718347: RNCC: 3 | RNVC: 2

14 Feb 2005

4730-14-570-8595
Pipe Elbow

145708595
CMJ 116 272 OR C: RNCC: 3 | RNVC: 2
CMJ 116 272 OR C: RNCC: 5 | RNVC: 2

30 Jan 2012

4730-14-413-5835
Tube Coupling

144135835
LL011-CC10S: RNCC: 3 | RNVC: 2
88771000: RNCC: 5 | RNVC: 2

17 Dec 1986

4730-14-429-3722
Fluid Passage Bolt

144293722
755-2112: RNCC: 3 | RNVC: 2

18 Jan 1989

4730-14-438-7420
Pipe Joint Welding Ring

144387420
LN324-079REP16: RNCC: 3 | RNVC: 2
LN324-079F7REP16: RNCC: 5 | RNVC: 2

3 Apr 1990

4730-14-222-7319
Tube Tee

142227319
GSM1297FE3-31TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-383-6223
Tube To Boss Straight Adapter

143836223
TB30-77058-100: RNCC: 3 | RNVC: 2
TB30-77058-100: RNCC: 5 | RNVC: 2

11 Apr 1983

4730-14-376-7921
Quick Disconnect Coupling Half

143767921
NO PRIMARY REF14-376-7921: RNCC: 3 | RNVC: 2
B14DC1060-021: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-508-0467
Tube To Boss Straight Adapter

145080467
RR10-100: RNCC: 3 | RNVC: 9
1911060154: RNCC: 5 | RNVC: 9

26 Aug 1998

4730-14-400-4596
Fluid Passage Bolt

144004596
R02025-04: RNCC: 3 | RNVC: 2
R02025: RNCC: 5 | RNVC: 2

24 Apr 1985

4730-14-518-3755
Quick Disconnect Coupling Half

145183755
RBE11.1813/IC/FB/JV/OD: RNCC: 3 | RNVC: 2

2 Feb 2000

4730-14-427-0463
Flange To Hose Straight Adapter

144270463
NG423-53: RNCC: 3 | RNVC: 2

5 Oct 1988

4730-14-367-5679
Pipe Flange

143675679
D00289-60: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-393-4023
Quick Disconnect Coupling Half

143934023
N010-110-81: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-453-3032
Tube Coupling

144533032
5449817: RNCC: 3 | RNVC: 2
60003208: RNCC: 5 | RNVC: 2
85-694-5614: RNCC: 6 | RNVC: 9

12 Feb 1992

4730-14-380-0598
Tube To Boss Straight Adapter

143800598
1204-12-12-17C0: RNCC: 3 | RNVC: 2
52404: RNCC: 5 | RNVC: 9

8 Nov 1982

4730-14-230-5967
Tube Coupling Assembly

142305967
3701S16X12A: RNCC: 3 | RNVC: 2
3701S16X12A: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-345-0199
Tube To Boss Straight Adapter

143450199
3200841: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-416-5741
Tube Fitting Brazing Ferrule

144165741
4730GF-DN48,3I108: RNCC: 2 | RNVC: 2
4730GF-DN48,3I108: RNCC: 5 | RNVC: 2

18 Jun 1987

4730-14-351-5222
Tube To Boss Straight Adapter

143515222
A1542: RNCC: 3 | RNVC: 2
0318: RNCC: 5 | RNVC: 2

12 Sep 1978

4730-14-553-4785
Flange To Boss Elbow

145534785
0319720270: RNCC: 3 | RNVC: 2

5 Apr 2007

4730-14-345-1295
Fluid Pressure Line Multiple Connector

143451295
103104002604: RNCC: 3 | RNVC: 2
103104002604: RNCC: 5 | RNVC: 2

5 Oct 1977

4730-14-400-8171
Fluid Pressure Line Multiple Connector

144008171
7N04-90MK: RNCC: 3 | RNVC: 2
9560129260: RNCC: 5 | RNVC: 2

21 May 1985

4730-14-553-3940
Tube Coupling

145533940
M4721304100000: RNCC: 3 | RNVC: 2
M4721304100000: RNCC: 5 | RNVC: 2

29 Mar 2007

4730-14-551-1192
Hose-Tube Flange Lateral

145511192
47176760: RNCC: 3 | RNVC: 2

28 Aug 2006

4730-14-307-7269
Pipe Flange

143077269
321MA0015REP22: RNCC: 3 | RNVC: 2
321MA015REP22: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-479-2536
Quick Disconnect Coupling Half

144792536
480814: RNCC: 3 | RNVC: 2

3 Jan 1996

4730-14-454-1620
Pipe Flange

144541620
44159: RNCC: 3 | RNVC: 2

24 Mar 1992

4730-14-447-7035
Tube Coupling

144477035
C24881001: RNCC: 3 | RNVC: 2

29 May 1991

4730-14-313-7024
Racc A Bride Taraud

143137024
0064761690: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-306-6574
Tube Tee

143066574
1050-75-190-00: RNCC: 3 | RNVC: 2
75-190-00: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-261-3567

4730-14-386-4541
Monta Isole Raccord

143864541
510007787403: RNCC: 3 | RNVC: 2
077874-03: RNCC: 3 | RNVC: 2
830306: RNCC: 5 | RNVC: 2
B05416-97: RNCC: 5 | RNVC: 2
077874-03: RNCC: 5 | RNVC: 9
510007787403: RNCC: 5 | RNVC: 9

24 Aug 1983

4730-14-495-1910
Graisseur

144951910
NO PRIMARY REF14-495-1910: RNCC: 3 | RNVC: 2
F50011: RNCC: 5 | RNVC: 9
F300 0T 018 6290: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-389-6894
Tube To Boss Straight Adapter

143896894
702A30-1524-20: RNCC: 3 | RNVC: 2
702A-30-1524-20: RNCC: 5 | RNVC: 2

20 Dec 1983

4730-14-227-5609
Bride

142275609
2-01626: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-473-9495
Tube Tee

144739495
10RA12L-8-12LNU: RNCC: 3 | RNVC: 2
88400400: RNCC: 5 | RNVC: 2
5005030317: RNCC: 5 | RNVC: 2
810131196NU: RNCC: 5 | RNVC: 2

18 Jan 1995

4730-14-327-6488
Fluid Pressure Line Multiple Connector

143276488
A24972-3: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-521-3549
Tube Fitting Flared Sleeve

145213549
27152415-9: RNCC: 3 | RNVC: 2

20 Jul 2000

4730-14-426-7809
Tube Tee

144267809
4730HEING088,9X16-48,3X7,1: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-524-8182
Swivel Flange To Hose Connector

145248182
7-0076-502: RNCC: 3 | RNVC: 2
8006454G00: RNCC: 5 | RNVC: 2

18 Apr 2001

4730-14-414-6825
Threaded Tube Fitting Plug

144146825
4730HK-BSC42,4: RNCC: 2 | RNVC: 2
MEC10524: RNCC: 3 | RNVC: 2

24 Feb 1987

4730-14-450-0087
Tube To Boss Straight Adapter

144500087
F4BXS6-1-2: RNCC: 3 | RNVC: 2
91641522: RNCC: 5 | RNVC: 2

18 Sep 1991

4730-14-206-2811
Fluid Pressure Line Multiple Connector

142062811
17-7-6338: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-509-1437
Tube Coupling

145091437
HV6635013: RNCC: 3 | RNVC: 2
2822-4-8: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-428-5590
Quick Disconnect Coupling Assembly

144285590
642A16-3: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-380-8529
Flexible Tube Coupling Assembly

143808529
L25F2: RNCC: 3 | RNVC: 2

14 Dec 1982

4730-14-202-3767
Tube Coupling Inverted Nut

142023767
R5412: RNCC: 3 | RNVC: 2
282320: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-276-2813
Sediment Strainer Element

142762813
160-61919: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-397-8390
Coupleur Vanne

143978390
1711-D 3 POUCES: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-398-7064
Pipe Flange

143987064
J05085-04-0600P007: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-423-7114
Pipeline Flexible Spacer

144237114
63411061: RNCC: 3 | RNVC: 2
7700R70-106-2X: RNCC: 5 | RNVC: 2

28 Apr 1988

4730-14-549-0763
Flange To Hose Elbow

145490763
78841-004: RNCC: 3 | RNVC: 2

2 Mar 2006

4730-14-565-7760
Lubrication Fitting

145657760
NO PRIMARY REF 14-565-7760: RNCC: 3 | RNVC: 2
DLGR0027: RNCC: 5 | RNVC: 2
2044M13: RNCC: 5 | RNVC: 2

22 Sep 2010

4730-14-261-2620
Raccord

142612620
175-53-103: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-450-9753
Fluid Pressure Line Multiple Connector

144509753
F781-45: RNCC: 3 | RNVC: 2

23 Oct 1991

4730-14-351-5725
Raccord Multip Fond

143515725
114199: RNCC: 3 | RNVC: 2
BFCSAMM114199: RNCC: 5 | RNVC: 2

12 Sep 1978

4730-14-362-5788
Tube Coupling

143625788
492-15007: RNCC: 3 | RNVC: 2
492-15007: RNCC: 3 | RNVC: 9

19 Mar 1980

4730-14-398-9982
Pipe Flange

143989982
182276: RNCC: 3 | RNVC: 2
R051001-05: RNCC: 5 | RNVC: 2
5171526000: RNCC: 5 | RNVC: 2
715260: RNCC: 5 | RNVC: 9

6 Mar 1985

4730-14-247-6390
Boulon A Passage De

142476390
0948568045: RNCC: 3 | RNVC: 2
0948568045: RNCC: 5 | RNVC: 9
948568045: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-282-3040
Olive Pour Tuyau

142823040
NO PRIMARY REF14-282-3040: RNCC: 3 | RNVC: 2
230: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-426-9037
Guide Membrane

144269037
DLT033393: RNCC: 3 | RNVC: 2

28 Sep 1988

4730-14-263-3243
Raccord Dequerre Sp

142633243
100001437: RNCC: 3 | RNVC: 9
F3004: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-367-7986

4730-14-293-0868
Quick Disconnect Coupling Half

142930868
6702F4B12RACC0RD25: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-281-7411
Tube To Boss Straight Adapter

142817411
DM46: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-399-3317
Tube To Boss Straight Adapter

143993317
742DGA16: RNCC: 3 | RNVC: 2
74742DGA16: RNCC: 5 | RNVC: 2

6 Mar 1985

4730-14-515-6210
Tube To Boss Straight Adapter

145156210
3E4054: RNCC: 3 | RNVC: 2

21 Jul 1999

4730-14-553-2571
Tube Coupling

145532571
82079820000: RNCC: 3 | RNVC: 2

20 Mar 2007

4730-14-258-8364
Fluid Pressure Line Multiple Connector

142588364
50584: RNCC: 3 | RNVC: 2
24000290P: RNCC: 5 | RNVC: 9
2638: RNCC: 5 | RNVC: 9
2638S: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-231-0940
Tube-Hose Fitting Compression Sleeve

142310940
E29601F12D: RNCC: 2 | RNVC: 2
70124: RNCC: 3 | RNVC: 2
0000324198: RNCC: 3 | RNVC: 2
303143: RNCC: 5 | RNVC: 2
0703200500: RNCC: 5 | RNVC: 2
703200500: RNCC: 5 | RNVC: 2
0000324198: RNCC: 5 | RNVC: 9
324198: RNCC: 5 | RNVC: 9
D12279: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-527-5700
Pipe Flange

145275700
9019CPVT2049: RNCC: 3 | RNVC: 2

30 Oct 2001

4730-14-520-2947
Fluid Pressure Line Multiple Connector

145202947
690003356: RNCC: 3 | RNVC: 2

17 May 2000

4730-14-336-7630
Fluid Passage Bolt

143367630
329017: RNCC: 3 | RNVC: 2
918011200: RNCC: 5 | RNVC: 2
396505017: RNCC: 5 | RNVC: 9
23610150: RNCC: 5 | RNVC: 9
DBA329017: RNCC: 5 | RNVC: 9

7 Oct 1976

4730-14-374-8771
Self-Sealing Coupling Assembly

143748771
S0M55HP: RNCC: 3 | RNVC: 2
SM05506AU3206: RNCC: 5 | RNVC: 2

30 Jan 1982

4730-14-247-1008
Bouchon Filete

142471008
HE60E11: RNCC: 3 | RNVC: 2
531139: RNCC: 5 | RNVC: 2
HE60E11: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-249-2081
Raccord Special

142492081
39171: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-300-7079

4730-14-497-0283
Fluid Pressure Line Multiple Connector

144970283
50-5061: RNCC: 3 | RNVC: 2
F300 0T 022 5751: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-457-7895
Tube To Gas Fitting Straight Adapter

144577895
FF2515T1616S: RNCC: 3 | RNVC: 2

23 Sep 1992

4730-14-561-6072
Return Tube Bend

145616072
6M14C8OMLOS: RNCC: 3 | RNVC: 2
20 250 100 3210: RNCC: 5 | RNVC: 2

4 Aug 2009

4730-14-566-1951
Fluid Passage Bolt

145661951
NO PRIMARY REF 14-566-1951: RNCC: 3 | RNVC: 2
VCM 14/150: RNCC: 5 | RNVC: 9
FS0000168: RNCC: 6 | RNVC: 9

26 Oct 2010

4730-14-406-6478
Demont Demi-Raccord

4730-14-420-1454

4730-14-407-1500

4730-14-473-3271
Desembuage Bouchon

144733271
MY20730-10848: RNCC: 3 | RNVC: 2

13 Dec 1994

4730-14-240-5689
Crepine Daspiration

142405689
NO PRIMARY REF14-240-5689: RNCC: 3 | RNVC: 2
LE15336: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-500-7386
Tube To Boss Straight Adapter

145007386
4749018: RNCC: 3 | RNVC: 2
4749018: RNCC: 5 | RNVC: 2
4749018: RNCC: 5 | RNVC: 2
F300 0T 024 7583: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-224-3999

4730-14-328-0052
Mamelon Double Pour

4730-14-362-5897
Tube To Boss Straight Adapter

143625897
DLT587762: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-514-6503
Swivel Retaining Pipe Flange

145146503
10000E30459: RNCC: 3 | RNVC: 2

4 Jun 1999

4730-14-573-0181
Tube Tee

145730181
ASNA3752-060404: RNCC: 1 | RNVC: 2
PE20103-060404: RNCC: 3 | RNVC: 2
ASNA3752-060404: RNCC: 5 | RNVC: 2

4 Sep 2012

4730-14-416-5798
Quick Disconnect Coupling Half

144165798
MRA04-2904/IB: RNCC: 3 | RNVC: 2
MR04-2904/IB: RNCC: 5 | RNVC: 2

18 Jun 1987

4730-14-341-4084

4730-14-326-1545
Raccord Sur Capacit

143261545
GSM513-006F6: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-304-0111

4730-14-378-6495

4730-14-378-6534

4730-14-488-1252
Fluid Passage Bolt

144881252
25628577: RNCC: 3 | RNVC: 2
2-562857-7: RNCC: 5 | RNVC: 2
E25125B100S35QKACM: RNCC: 5 | RNVC: 2

18 Apr 1997

4730-14-554-0072
Tube-Pipe Fitting Kit

145540072
S.840144: RNCC: 3 | RNVC: 2

7 Jun 2007

4730-14-494-7007
Tube To Boss Straight Adapter

144947007
NO PRIMARY REF14-494-7007: RNCC: 3 | RNVC: 2
0171858: RNCC: 5 | RNVC: 9
F300 0T 017 8005: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-427-0321
Fluid Passage Bolt

144270321
ATL071055012020: RNCC: 3 | RNVC: 2
85-693-7757: RNCC: 6 | RNVC: 9

5 Oct 1988

4730-14-287-0124
Tube To Boss Straight Adapter

142870124
6101-1887: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-451-5349
Fluid Pressure Line Multiple Connector

144515349
13A8-12X100: RNCC: 3 | RNVC: 9
91630361: RNCC: 5 | RNVC: 2
13A8-12X100NU: RNCC: 5 | RNVC: 9

21 Nov 1991

4730-14-349-3695
Fluid Passage Bolt

143493695
NO PRIMARY REF14-349-3695: RNCC: 3 | RNVC: 2
7701007672: RNCC: 5 | RNVC: 2
A13-104049V: RNCC: 5 | RNVC: 9
7701007672: RNCC: 5 | RNVC: 9
A13-234: RNCC: 5 | RNVC: 9
7701007672: RNCC: 6 | RNVC: 9

22 May 1978

4730-14-492-6417
Hose To Boss Straight Adapter

144926417
B512: RNCC: 3 | RNVC: 2
F300 0T 008 3202: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-293-3810
Pipe Flange

142933810
0064632300: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-231-1251
Fuel Feeder Manifold

142311251
0202127020: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-334-6452
Quick Disconnect Coupling Half

143346452
STH00800: RNCC: 3 | RNVC: 2
STH0080: RNCC: 5 | RNVC: 2
STH00800: RNCC: 5 | RNVC: 2

1 Jun 1976

4730-14-378-5011
Fluid Pressure Line Multiple Connector

143785011
SM6T08: RNCC: 3 | RNVC: 2
C90ST0023: RNCC: 3 | RNVC: 2
32000251: RNCC: 5 | RNVC: 2
32000251: RNCC: 5 | RNVC: 2
C90ST0023: RNCC: 5 | RNVC: 2
32000251: RNCC: 5 | RNVC: 9
C90ST0023: RNCC: 5 | RNVC: 9
C90ST0023: RNCC: 5 | RNVC: 9

11 Aug 1982

4730-14-357-0940
Tube Tee

143570940
79043326: RNCC: 3 | RNVC: 2
79043326: RNCC: 5 | RNVC: 9

7 Jun 1979

4730-14-534-0126
Quick Disconnect Coupling Half

145340126
N 004 367 02: RNCC: 3 | RNVC: 2
HCB28 N 004 367 02: RNCC: 5 | RNVC: 2

6 Mar 2003

4730-14-418-4629
Flange To Tube Straight Adapter

144184629
4-454206: RNCC: 3 | RNVC: 9
4-454206: RNCC: 5 | RNVC: 2
4-454206: RNCC: 5 | RNVC: 9

26 Aug 1987

4730-14-268-6651
Demi-Raccord A Demo

142686651
1317-4-242: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-319-5626
Hose Coupling Assembly

143195626
9957462: RNCC: 3 | RNVC: 2
190261-8: RNCC: 5 | RNVC: 9
9957462: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-306-7596
Bride A Zinc

143067596
000MA0833F8: RNCC: 3 | RNVC: 2
000MA0833F4REP1DE63-5: RNCC: 5 | RNVC: 2
000MA833F4REP1DE63-5: RNCC: 5 | RNVC: 2
000MA833F8: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-520-5870
Hose To Boss Straight Adapter

145205870
4782-4-4: RNCC: 3 | RNVC: 2

24 May 2000

4730-14-481-2265
Tube To Boss Straight Adapter

144812265
81 34 28: RNCC: 3 | RNVC: 2

25 Apr 1996

4730-14-301-6940
Tube Coupling Assembly

143016940
3601R32A: RNCC: 3 | RNVC: 2
3601R32A: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-270-2424

4730-14-362-7513
Tube-Hose Fitting Compression Sleeve

143627513
A70306: RNCC: 3 | RNVC: 2
A70306: RNCC: 5 | RNVC: 9
85-691-2053: RNCC: 6 | RNVC: 9

19 Mar 1980

4730-14-444-9716
Tube Tee

144449716
499-10002-3: RNCC: 3 | RNVC: 2
499-10002-3: RNCC: 3 | RNVC: 9

30 Jan 1991

4730-14-287-4197
Lubrication Fitting

142874197
GT1195-3-8GAZ: RNCC: 3 | RNVC: 2
9203002: RNCC: 3 | RNVC: 2
91358027: RNCC: 5 | RNVC: 9
9-20-30-02: RNCC: 5 | RNVC: 9
91358027: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-208-2700
Tube To Boss Straight Adapter

142082700
13-10-8-13: RNCC: 3 | RNVC: 2
UFA10X8-13N: RNCC: 3 | RNVC: 2
6A10-8-13: RNCC: 3 | RNVC: 2
UF10-13: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-233-2494
Ecrou Raccord De Tr

142332494
A10-71-460-02-0: RNCC: 3 | RNVC: 2
A10-71-460-02-0: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-419-0775
Tube To Boss Straight Adapter

144190775
P4-12-6-12X125NU: RNCC: 3 | RNVC: 2
12-6-12X125NU: RNCC: 5 | RNVC: 9

30 Sep 1987

4730-14-327-6198
Bulkhead Hose Connector

143276198
0264751070: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-539-1303
Tube Coupling Assembly

145391303
NGM0099087208761: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-268-5747
Lubrication Fitting

142685747
5002M12X175: RNCC: 3 | RNVC: 2
ALG5002M12X175: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-514-1056
Fluid Passage Bolt

145141056
5172340700: RNCC: 3 | RNVC: 2

26 Apr 1999

4730-14-420-4668
Quick Disconnect Coupling Half

144204668
1282121: RNCC: 3 | RNVC: 2
203037: RNCC: 5 | RNVC: 2

10 Dec 1987

4730-14-292-2442
Bulkhead Hose Connector

142922442
0264300830: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-503-1751
Bulkhead Hose Connector

145031751
RA1M534303220: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-217-3579
Tube Coupling Assembly

142173579
3901S25A: RNCC: 3 | RNVC: 2
3901S25A: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-492-3255
Tube To Boss Straight Adapter

144923255
5000014249: RNCC: 3 | RNVC: 2
F300 0T 007 3928: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-552-7465
Tube Tee

145527465
99.620.3006.29: RNCC: 3 | RNVC: 2

29 Jan 2007

4730-14-212-3523
Tube Coupling

142123523
3751S25A: RNCC: 3 | RNVC: 2
A1342: RNCC: 5 | RNVC: 2
3751K25A: RNCC: 5 | RNVC: 9
3751S25A: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-287-1575
Fluid Pressure Line Multiple Connector

142871575
160694: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-395-0490
Flange To Tube Straight Adapter

143950490
0301511360: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-398-1602
Pipe Flange

143981602
S2664: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-346-9142

4730-14-572-3275
Hose Clamp

145723275
EN4234M050HSA: RNCC: 2 | RNVC: 2

25 Jun 2012

4730-14-562-2384
Tube Elbow

145622384
DL100: RNCC: 3 | RNVC: 2
FS0000304: RNCC: 6 | RNVC: 9

8 Oct 2009

4730-14-453-8825
Fluid Pressure Line Multiple Connector

144538825
624742: RNCC: 3 | RNVC: 2

12 Mar 1992

4730-14-351-6123

4730-14-227-8489

4730-14-459-3043
Te Pour Tube

4730-14-445-4248

4730-14-471-3252

4730-14-331-1610
Flexible Tube Coupling Assembly

143311610
L50-03: RNCC: 3 | RNVC: 2
DHS613-211-36: RNCC: 5 | RNVC: 2
L50-0-3: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-451-8894
Pipe Expansion Joint

144518894
26442805300: RNCC: 3 | RNVC: 2
215277-01: RNCC: 5 | RNVC: 2
43276742: RNCC: 5 | RNVC: 2

11 Dec 1991

4730-14-564-8607
Fluid Pressure Line Multiple Connector

145648607
309-169-102-0: RNCC: 3 | RNVC: 2

11 Jun 2010

4730-14-333-5193
Barillet A 4 Voies

143335193
GSM163-016F23: RNCC: 3 | RNVC: 2
GSM163-16F23: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-399-3143
Adaptateur Raccord

143993143
34-10/8-10SP: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-395-3881
Adaptateur Prise

143953881
C055132545-10: RNCC: 3 | RNVC: 2
32545-10: RNCC: 5 | RNVC: 2

2 Oct 1984

4730-14-374-1399
Tube To Boss Straight Adapter

143741399
14632-112-3A: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-341-4070

4730-14-558-3794
Hose Coupling

145583794
1725368: RNCC: 3 | RNVC: 2

26 Sep 2008

4730-14-235-1379

4730-14-499-7906
Union

144997906
31087.0: RNCC: 3 | RNVC: 2
31087-0: RNCC: 3 | RNVC: 2
F300 0T 023 7811: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-526-5063
Flange To Hose Elbow

145265063
C69929-1: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-247-3598

4730-14-233-9275
Coude Pour Tube Spe

142339275
104-77-17: RNCC: 3 | RNVC: 2
104-77-17: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-414-2451
Pipe Flange

144142451
U1240-11D1SPN50DN100Z2CND17-12T3: RNCC: 3 | RNVC: 2

28 Jan 1987

4730-14-324-5333

4730-14-365-3030

4730-14-353-7235
Tube Coupling Nut Assembly

143537235
E-JET22P: RNCC: 3 | RNVC: 2
EJET22P: RNCC: 5 | RNVC: 2
KEJET22P: RNCC: 5 | RNVC: 2

16 Jan 1979

4730-14-433-0699
Tube To Boss Straight Adapter

144330699
4-4F40XS: RNCC: 3 | RNVC: 2
5929953: RNCC: 5 | RNVC: 2

7 Jul 1989

4730-14-395-3249
Tube Union

143953249
AFY270 1-2: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-478-5681
Tube-Hose Fitting Compression Sleeve

144785681
743 T 12: RNCC: 3 | RNVC: 2
743T12: RNCC: 5 | RNVC: 2
74743T12: RNCC: 5 | RNVC: 2

8 Nov 1995

4730-14-429-2273
Obturation Pointeau

144292273
P6213-4: RNCC: 3 | RNVC: 2

11 Jan 1989

4730-14-484-5075
Purgeur

144845075
3100956-6: RNCC: 3 | RNVC: 2

21 Nov 1996

4730-14-324-1451
Bulkhead Hose Connector

143241451
000MA0230F7REP1A3-5: RNCC: 3 | RNVC: 2
000MA230F7REP1A3-5: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-530-9181
Pipe Flange

145309181
2532/9: RNCC: 3 | RNVC: 2

17 Jul 2002

4730-14-402-1968
Raccord Valve

144021968
501252-01: RNCC: 3 | RNVC: 2
20-501252-01: RNCC: 5 | RNVC: 2

26 Jun 1985

4730-14-207-0092
Raccord Orientable

142070092
NO PRIMARY REF14-207-0092: RNCC: 3 | RNVC: 2
49675: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-439-2481
Prise De Convoyage

144392481
332A55-1093-00: RNCC: 3 | RNVC: 2

25 Apr 1990

4730-14-563-7755
Pipe To Tube Swivel Joint

145637755
USM15-14J04G: RNCC: 3 | RNVC: 2

15 Mar 2010

4730-14-283-5165
Swivel Joint Parts Kit

142835165
410258: RNCC: 3 | RNVC: 9

1 Jan 1972

4730-14-296-6458
Fluid Passage Bolt

142966458
2-140504-5: RNCC: 3 | RNVC: 2
140504: RNCC: 5 | RNVC: 9
2-140504-5: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-328-5599
Enveloppe Detectric

143285599
M10-106REP2: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-242-7954

4730-14-218-3028
Tube-Hose Fitting Compression Sleeve

142183028
40456: RNCC: 3 | RNVC: 2
BI5: RNCC: 3 | RNVC: 9
23052-5: RNCC: 5 | RNVC: 2
N7061525069: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-569-6842
Hose Bushing

145696842
RMF 152.101: RNCC: 3 | RNVC: 2

13 Oct 2011

4730-14-503-5146
Quick Disconnect Coupling Half

145035146
T2ESPK8PRESR0L0K: RNCC: 3 | RNVC: 2

16 Jan 1998

4730-14-388-7592
Tube Tee

143887592
NU318: RNCC: 3 | RNVC: 2
M4ZS500D5700: RNCC: 5 | RNVC: 2

29 Nov 1983

4730-14-405-0444
Tube Fitting Brazing Ferrule

144050444
270CU32: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-512-7553
Fluid Passage Bolt

145127553
800033868: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-225-0567
Bague Speciale

142250567
JEA16-60: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-455-6614
Pipeline Flexible Spacer

144556614
53-D-038-16: RNCC: 3 | RNVC: 2

5 Jun 1992

4730-14-520-2955
Tube To Boss Straight Adapter

145202955
21114G33.16: RNCC: 3 | RNVC: 2

17 May 2000

4730-14-303-5732
Tube To Boss Straight Adapter

143035732
A78286: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-527-6894
Tube Coupling

145276894
719244: RNCC: 3 | RNVC: 2

13 Nov 2001

4730-14-431-0951
Pipe Expansion Joint

144310951
DILATOFLEX-KARCNDN100PN16: RNCC: 3 | RNVC: 9

5 Apr 1989

4730-14-443-3309
Flange To Tube Elbow

144433309
1104-962: RNCC: 3 | RNVC: 2

14 Nov 1990

4730-14-430-6859
Quick Disconnect Coupling Half

144306859
480066: RNCC: 3 | RNVC: 2
480066: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-427-9253
Quick Disconnect Coupling Half

144279253
446590: RNCC: 3 | RNVC: 2

23 Nov 1988

4730-14-433-0607
Tube To Boss Straight Adapter

144330607
9881900140: RNCC: 3 | RNVC: 2

5 Jul 1989

4730-14-445-0918
Straight Tubing Connector

144450918
331623: RNCC: 3 | RNVC: 2

31 Jan 1991

4730-14-464-3672
Pipe Fitting Assortment

144643672
SBE1119: RNCC: 3 | RNVC: 2

28 Jul 1993

4730-14-503-4923
Bulkhead Hose Connector

145034923
RBF03248: RNCC: 3 | RNVC: 2
8202932: RNCC: 5 | RNVC: 2

14 Jan 1998

4730-14-367-0189

4730-14-563-3187
Tube Coupling

145633187
190501: RNCC: 3 | RNVC: 2

25 Jan 2010

4730-14-556-9011
Hose Coupling

145569011
4014666: RNCC: 3 | RNVC: 2

21 Apr 2008

4730-14-354-0952
Demi-Bride

143540952
09508094934: RNCC: 3 | RNVC: 2
95080P: RNCC: 5 | RNVC: 2

16 Jan 1979

4730-14-565-9191
Hose Coupling

145659191
ENSEM13848X00: RNCC: 3 | RNVC: 2

5 Oct 2010

4730-14-242-9009

4730-14-573-8523
Hose Clamp

145738523
ABS0901R160: RNCC: 1 | RNVC: 2
ABS0901R160: RNCC: 3 | RNVC: 2
901160: RNCC: 5 | RNVC: 1
E-ABS-0901-R160: RNCC: 5 | RNVC: 2

14 Nov 2012

4730-14-573-8817
Tube Elbow

145738817
NSA855007-8: RNCC: 1 | RNVC: 2
PE20002-08: RNCC: 3 | RNVC: 2
NSA855007-8: RNCC: 5 | RNVC: 2

19 Nov 2012

4730-14-256-6038
Tube Tee

142566038
631X6209: RNCC: 3 | RNVC: 2
T2-6-631X6209: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-505-6785
Self-Sealing Coupling Assembly

145056785
GMA3-20-S0MDA3C: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-382-8128
Equi Embout Raccord

143828128
0257857080: RNCC: 3 | RNVC: 2
85-692-1339: RNCC: 6 | RNVC: 9

17 Feb 1983

4730-14-514-3216
Tube Fitting Insert

145143216
18PR000A0491N: RNCC: 3 | RNVC: 2
213EPA64400-001-D: RNCC: 5 | RNVC: 2

11 May 1999

4730-14-211-5655
Union Simple Male

142115655
12-4-8X100NU: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-305-1833

4730-14-576-3818
Tube Nipple

145763818
10620356: RNCC: 3 | RNVC: 1

14 Jun 2013

4730-14-343-0000
Tube To Boss Straight Adapter

143430000
G12-17-15-21CYLNU: RNCC: 3 | RNVC: 2
UMAG17X15-21NNU: RNCC: 3 | RNVC: 2
UMAG17X15-21CYLNU: RNCC: 5 | RNVC: 2
4AG17-15-21CYLNU: RNCC: 5 | RNVC: 2
1297: RNCC: 5 | RNVC: 2
3031892R1: RNCC: 5 | RNVC: 2

16 May 1977

4730-14-262-1537

4730-14-262-1360

4730-14-206-3601

4730-14-347-6104
Embout A Souder

143476104
AS34TV135F12A: RNCC: 3 | RNVC: 2

1 Mar 1978

4730-14-525-4019
Fluid-Emulsion Spray Nozzle

145254019
1/4 BNM 8 SS: RNCC: 3 | RNVC: 2
SYB2877: RNCC: 5 | RNVC: 2
1/4 BNM 8 SS: RNCC: 5 | RNVC: 2
SG02207REP13: RNCC: 5 | RNVC: 2

30 May 2001

4730-14-343-2155
Tube To Boss Straight Adapter

143432155
8-93193: RNCC: 3 | RNVC: 2

16 Jun 1977

4730-14-324-7806
Tube To Boss Straight Adapter

143247806
288527-1: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-450-2469
Tube Coupling

144502469
E 76 37 02 01: RNCC: 3 | RNVC: 2
RA 16 X 12 NDL: RNCC: 5 | RNVC: 2
89471879: RNCC: 5 | RNVC: 2

25 Sep 1991

4730-14-433-3713
Tube To Boss Straight Adapter

144333713
DLT603737: RNCC: 3 | RNVC: 2
DLT565225GREP8CFOLIO18-1/3: RNCC: 5 | RNVC: 2

24 Jul 1989

4730-14-414-2295
Pipe Flange

144142295
U1240-11LSPPN150DN100Z2CND1712T3: RNCC: 3 | RNVC: 2

27 Jan 1987

4730-14-436-1235
Pipe Flange

144361235
J05150-04-0100P050: RNCC: 3 | RNVC: 2

6 Dec 1989

4730-14-249-0028
Raccord De Reductio

142490028
JGA08-20: RNCC: 3 | RNVC: 2
13580-602REDUCTI0N: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-293-3407
Raccord Ebauche

142933407
121E52-126-01-01: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-485-9929
Fluid Pressure Line Multiple Connector

144859929
63036-8: RNCC: 3 | RNVC: 2

26 Feb 1997

4730-14-527-3841
Tube To Boss Straight Adapter

145273841
H145313: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-387-0830
Pipeline Flexible Spacer

143870830
DILAT0FLEXNT300HHMN7068: RNCC: 3 | RNVC: 9

24 Aug 1983

4730-14-472-3443
Anchor And Reinforcement Pipe Clamp

144723443
2075: RNCC: 3 | RNVC: 2

19 Oct 1994

4730-14-495-8638
Union

144958638
588848: RNCC: 3 | RNVC: 2
F300 0T 020 3007: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-499-2984
Union

144992984
68209128: RNCC: 3 | RNVC: 2
5001832362: RNCC: 3 | RNVC: 2
F300 0T 021 4578: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-516-8567
Tube To Boss Straight Adapter

145168567
101162941560: RNCC: 3 | RNVC: 2

20 Oct 1999

4730-14-527-6167
Quick Disconnect Coupling Half

145276167
1509-404: RNCC: 3 | RNVC: 2

5 Nov 2001

4730-14-516-3642
Tube To Boss Straight Adapter

145163642
CV17853: RNCC: 3 | RNVC: 2

22 Sep 1999

4730-14-543-9133
Fluid Passage Bolt

145439133
970302159: RNCC: 3 | RNVC: 2

15 Dec 2004

4730-14-269-1880

4730-14-562-6197
Pipe To Tube Tee

145626197
ET20SREDOMDCF: RNCC: 3 | RNVC: 2
ET20SREDOMDCF: RNCC: 5 | RNVC: 9

9 Nov 2009

4730-14-485-2642
Tube To Boss Straight Adapter

144852642
00114 G13 06: RNCC: 3 | RNVC: 2
4738G13-6: RNCC: 5 | RNVC: 9
00 114 G13 06 B: RNCC: 5 | RNVC: 9
4738-G13-6: RNCC: 5 | RNVC: 9

15 Jan 1997

4730-14-239-4997
Tamis Filtre A Sedi

142394997
0176-521044-0: RNCC: 3 | RNVC: 2
0176-521044: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-210-9751
Union Simple Femell

142109751
53-14-20X150: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-319-8917
Fluid Pressure Line Multiple Connector

143198917
140M154: RNCC: 3 | RNVC: 2
140M154: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-300-7485
Fluid Pressure Line Multiple Connector

143007485
411MA0295F18: RNCC: 3 | RNVC: 2
411MA295F18: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-469-9135
Swivel Flange To Hose Elbow

144699135
COUDEORIENTUBE12: RNCC: 3 | RNVC: 2

18 May 1994

4730-14-435-2423
Tube To Boss Straight Adapter

144352423
440194: RNCC: 3 | RNVC: 2

31 Oct 1989

4730-14-362-4979
Tube To Boss Straight Adapter

143624979
003034282P: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-280-6442
Quick Disconnect Coupling Half

142806442
112567: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-211-4446
Fluid Pressure Line Multiple Connector

142114446
45122: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-424-7821
Quick Disconnect Coupling Assembly

144247821
A0523-045F3: RNCC: 3 | RNVC: 2

9 Jun 1988

4730-14-031-9689
Raccordement Embase

140319689
CPV6-12-18: RNCC: 3 | RNVC: 2

5 Jul 1980

4730-14-384-8938
Prel Rapide Raccord

143848938
9970-115-667: RNCC: 3 | RNVC: 2

2 Jun 1983

4730-14-549-7693
Tube To Boss Straight Adapter

145497693
F3014MAT523-3026FEUILLE13: RNCC: 3 | RNVC: 2

11 May 2006

4730-14-307-0871
Lubricant Pressure Relief Fitting

143070871
E260-01: RNCC: 3 | RNVC: 2
4ET4823: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-414-2282
Pipe Flange

144142282
U1240-11LSFPN150DN80Z2CND17-12T3: RNCC: 3 | RNVC: 2

27 Jan 1987

4730-14-453-9920
Quick Disconnect Coupling Half

144539920
31221008: RNCC: 3 | RNVC: 2
N7193630006: RNCC: 5 | RNVC: 2
227-5717: RNCC: 5 | RNVC: 2
N7193630006: RNCC: 5 | RNVC: 2
Z00.N7193630006: RNCC: 5 | RNVC: 2

19 Mar 1992

4730-14-369-6296
Quick Disconnect Coupling Half

143696296
RBE11-1153: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-488-1942
Tube Coupling

144881942
3L01-371: RNCC: 3 | RNVC: 2
RAQ0042: RNCC: 5 | RNVC: 2

22 Apr 1997

4730-14-495-6211
Union

144956211
V48375-63: RNCC: 3 | RNVC: 2
F300 0T 019 5490: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-262-1457

4730-14-216-0377

4730-14-301-5321

4730-14-260-9255
Pipe Flange

142609255
7062DB1F1F216XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-377-5458
Tube To Boss Straight Adapter

143775458
83663: RNCC: 3 | RNVC: 2
83663: RNCC: 5 | RNVC: 2

17 May 1982

4730-14-434-3064
Hydraulic Manifold Assembly

144343064
553442: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-495-4617
Union

144954617
T40375-29: RNCC: 3 | RNVC: 2
F300 0T 019 2968: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-283-8967
Fluid Pressure Line Multiple Connector

142838967
NO PRIMARY REF14-283-8967: RNCC: 3 | RNVC: 2
501071: RNCC: 5 | RNVC: 2
59-13-0603: RNCC: 5 | RNVC: 9

1 Jan 1972

Load More Results