What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 143 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 143 of 185

4730-14-287-7709

4730-14-334-0342

4730-14-213-1796

4730-14-527-6901
Tube Coupling

145276901
718901: RNCC: 3 | RNVC: 2

13 Nov 2001

4730-14-331-7548
Tube To Boss Straight Adapter

143317548
108-19-46: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-403-0506
Tube To Boss Straight Adapter

144030506
29739301: RNCC: 3 | RNVC: 2
29739301: RNCC: 5 | RNVC: 9

25 Jul 1985

4730-14-385-7077
Tube Coupling

143857077
CB1A10: RNCC: 3 | RNVC: 9

26 Jul 1983

4730-14-456-3462
Tube To Gas Fitting Straight Adapter

144563462
UMCK20X15.21S: RNCC: 3 | RNVC: 2

30 Jun 1992

4730-14-466-2806
Flange To Tube Elbow

144662806
10149005: RNCC: 3 | RNVC: 2

3 Nov 1993

4730-14-490-3587
Tube Fitting Brazing Ferrule

144903587
915003008207: RNCC: 3 | RNVC: 2

24 Sep 1997

4730-14-405-3732
Tube To Gas Fitting Straight Adapter

144053732
615992: RNCC: 3 | RNVC: 2

27 Nov 1985

4730-14-395-8933
Tube To Boss Straight Adapter

143958933
832135: RNCC: 3 | RNVC: 2

30 Oct 1984

4730-14-543-8014
Tube To Boss Straight Adapter

145438014
9321379: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-535-4580
Non-Metallic Connecting Sleeve

145354580
5010240564: RNCC: 3 | RNVC: 2

26 May 2003

4730-14-476-5787
Hose To Boss Straight Adapter

144765787
0500097: RNCC: 3 | RNVC: 2
FOE0500097: RNCC: 5 | RNVC: 9

21 Jun 1995

4730-14-401-6939
Tube To Boss Straight Adapter

144016939
2607-50A: RNCC: 3 | RNVC: 2

13 Jun 1985

4730-14-218-3995

4730-14-223-0934
Raccord Droit De Bo

142230934
D2604-7-105: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-490-5875
Tube To Boss Straight Adapter

144905875
5501-102-0: RNCC: 3 | RNVC: 2

2 Oct 1997

4730-14-275-2452
Tube Coupling

142752452
577-708-012-0: RNCC: 3 | RNVC: 2
9315-003-0: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-329-9358
Double Guil Raccord

143299358
BN320-556DN25DN40: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-202-5196

4730-14-561-9862
Hose Clamp

145619862
DLT056344: RNCC: 3 | RNVC: 2
FS0006053: RNCC: 6 | RNVC: 9

22 Sep 2009

4730-14-328-5331
Tube To Boss Straight Adapter

143285331
SP2-00-04-02: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-423-4394
Pipe Flange

144234394
UA50088006PN250-11D1DN80: RNCC: 2 | RNVC: 2
4730HCPN250DN08011D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-276-2103
Porte-Joint Complet

142762103
6784-1DN110A: RNCC: 3 | RNVC: 9

1 Jan 1971

4730-14-433-3632
Hose To Gas Fitting Straight Adapter

144333632
DLT151938: RNCC: 3 | RNVC: 2

24 Jul 1989

4730-14-449-7284
Pipe Elbow Assembly

144497284
721B915: RNCC: 3 | RNVC: 2
89232732: RNCC: 5 | RNVC: 2

4 Sep 1991

4730-14-422-9129
Fluid Pressure Line Multiple Connector

144229129
5502419: RNCC: 3 | RNVC: 2
5502419: RNCC: 5 | RNVC: 2

24 Mar 1988

4730-14-347-4656
Tube Coupling

143474656
A11A522360006: RNCC: 3 | RNVC: 2

1 Mar 1978

4730-14-332-2630
Fluid Passage Bolt

143322630
092682R: RNCC: 3 | RNVC: 2
092682: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-387-8830
Tube-Hose Fitting Compression Sleeve

143878830
741PN12: RNCC: 3 | RNVC: 2
741 PN 12: RNCC: 5 | RNVC: 2
741PN12: RNCC: 5 | RNVC: 2
74741PN12: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-515-3854
Tube To Boss Straight Adapter

145153854
6200102: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-443-3477
Pipeline Flexible Spacer

144433477
061200403200: RNCC: 3 | RNVC: 2

19 Nov 1990

4730-14-335-1352
Pipeline Flexible Spacer

143351352
I131NTE100PN16: RNCC: 2 | RNVC: 2
DILNTE100PN16: RNCC: 3 | RNVC: 2
DILNTE100PN16: RNCC: 5 | RNVC: 9

3 Jun 1976

4730-14-416-4301
Tube Fitting Brazing Ferrule

144164301
4730GF-DN25I108: RNCC: 2 | RNVC: 2
4730GF-DN25I108: RNCC: 5 | RNVC: 2

10 Jun 1987

4730-14-525-7787
Tube To Boss Straight Adapter

145257787
D102859C: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-515-7498
Bride Pompe

145157498
89090231104699A: RNCC: 3 | RNVC: 2

28 Jul 1999

4730-14-576-8216
Flange To Tube Tee

145768216
M4811341300000: RNCC: 3 | RNVC: 2

17 Jul 2013

4730-14-449-5403
Tube Union

144495403
UNION MALE NPT1 1/4 2353L33,7: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-283-5510
Raccord Reduction

142835510
LR32-25-0-3: RNCC: 3 | RNVC: 2
LR32-25-03: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-507-5394
Fluid Pressure Line Multiple Connector

145075394
704A34-422-030: RNCC: 1 | RNVC: 2
912-3/4EK: RNCC: 3 | RNVC: 2
91234EK: RNCC: 5 | RNVC: 2

16 Jul 1998

4730-14-312-4516
Quick Disconnect Plug

143124516
NO PRIMARY REF14-312-4516: RNCC: 3 | RNVC: 2
2141-07-40: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-032-0439
Self-Sealing Coupling Half

140320439
SMS158-20-01: RNCC: 3 | RNVC: 2

5 Jul 1980

4730-14-490-5556
Quick Disconnect Coupling Half

144905556
J05085-04-0900P004: RNCC: 3 | RNVC: 2

2 Oct 1997

4730-14-441-5624
Tube Union

144415624
LN320-036REP06: RNCC: 3 | RNVC: 2
1901080: RNCC: 3 | RNVC: 2
FLEX1L108PN16EPDM/ACIER: RNCC: 5 | RNVC: 2
STRAUB-FLEX1L108EPDM/ACIER: RNCC: 5 | RNVC: 2
190 1080: RNCC: 5 | RNVC: 9

3 Sep 1990

4730-14-423-4521
Pipe Flange

144234521
UA50088006PN100-11B2SDN125: RNCC: 2 | RNVC: 2
4730HCPN100DN12511B2S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-418-2542
Tube To Boss Straight Adapter

144182542
CH-604: RNCC: 3 | RNVC: 9
CH604: RNCC: 5 | RNVC: 9

6 Aug 1987

4730-14-445-8797
Drainage Pipe Lateral

144458797
0057907220: RNCC: 3 | RNVC: 2

27 Feb 1991

4730-14-427-1783
Tube To Boss Straight Adapter

144271783
034985: RNCC: 3 | RNVC: 2

6 Oct 1988

4730-14-325-9047
Pipe Flange

143259047
AS34TV104REP7: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-481-6257
Lubrication Fitting

144816257
VF500100: RNCC: 3 | RNVC: 9

23 May 1996

4730-14-372-6873

4730-14-202-6591

4730-14-254-8147
Fluid Pressure Line Multiple Connector

142548147
270133: RNCC: 3 | RNVC: 2
270133: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-543-8419
Tube To Boss Straight Adapter

145438419
560503228: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-235-2557
Fluid Passage Bolt

142352557
1050-52-582-15-0: RNCC: 3 | RNVC: 2
52-582-15-0: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-449-7647
Quick-Disconnect Nipple

144497647
BN324-621DN50: RNCC: 2 | RNVC: 2

6 Sep 1991

4730-14-202-5305
Tube Tee

142025305
R7608: RNCC: 3 | RNVC: 2
99058250: RNCC: 5 | RNVC: 2
RA7608: RNCC: 5 | RNVC: 2
91566542: RNCC: 5 | RNVC: 2
99058250: RNCC: 5 | RNVC: 2
85-695-0334: RNCC: 6 | RNVC: 9

1 Jan 1963

4730-14-220-6103
Tube Tee

142206103
R080610: RNCC: 3 | RNVC: 2
R14068: RNCC: 5 | RNVC: 2
R8X6X10: RNCC: 5 | RNVC: 2
85-514-3381: RNCC: 6 | RNVC: 9

1 Jan 1965

4730-14-368-2316
Quick Disconnect Coupling Half

143682316
0258-34: RNCC: 3 | RNVC: 2
N1-26-34: RNCC: 5 | RNVC: 2

20 Feb 1981

4730-14-501-2413
Tube To Boss Straight Adapter

145012413
475-018: RNCC: 3 | RNVC: 2
475.018: RNCC: 3 | RNVC: 2
F300 0T 025 2818: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-032-1538
Pipe Flange

140321538
CMT30E9030AF3DE76-1REP3: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-436-2543
Quick Disconnect Wye

144362543
NO PRIMARY REF14-436-2543: RNCC: 3 | RNVC: 2
RAR1439: RNCC: 5 | RNVC: 2
2300124: RNCC: 5 | RNVC: 9

11 Dec 1989

4730-14-441-1313
Raccorde Adaptateur

144411313
91713962: RNCC: 1 | RNVC: 2
12ABSPPSS: RNCC: 3 | RNVC: 9
12A-BSPP-SS: RNCC: 5 | RNVC: 9

22 Aug 1990

4730-14-522-7911
Hose To Grooved Clamp Coupling Straight Adapter

145227911
EBB8/12: RNCC: 3 | RNVC: 2
EBB8/12: RNCC: 5 | RNVC: 9

23 Nov 2000

4730-14-356-8709
Distribute Poussoir

143568709
NO PRIMARY REF14-356-8709: RNCC: 3 | RNVC: 2
160001: RNCC: 5 | RNVC: 9

15 May 1979

4730-14-515-6719
Tube To Boss Straight Adapter

145156719
3428753: RNCC: 3 | RNVC: 2

21 Jul 1999

4730-14-445-4502
Hydraulic System Accessories Manifold

144454502
FDEA14L: RNCC: 3 | RNVC: 2

14 Feb 1991

4730-14-469-6477
Tube To Boss Straight Adapter

144696477
PM1A775022011: RNCC: 3 | RNVC: 2
PM1A775022011: RNCC: 5 | RNVC: 2

4 May 1994

4730-14-440-6961
Straight Tubing Connector

144406961
440011: RNCC: 3 | RNVC: 2

18 Jul 1990

4730-14-526-7883
Flexible Tube Coupling Assembly

145267883
709347: RNCC: 3 | RNVC: 2

5 Sep 2001

4730-14-515-3872
Tube To Boss Straight Adapter

145153872
6200294: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-544-7524
Tube To Hose Straight Adapter

145447524
P763093: RNCC: 3 | RNVC: 2

22 Feb 2005

4730-14-542-7103
Tube Coupling

145427103
2021062200: RNCC: 3 | RNVC: 2

28 Jul 2004

4730-14-453-5560
Tube Tee

144535560
644581: RNCC: 3 | RNVC: 2

26 Feb 1992

4730-14-334-9292
Sediment Strainer Element

143349292
BM114842: RNCC: 3 | RNVC: 2

2 Jun 1976

4730-14-267-8580
Quick Disconnect Coupling Assembly

142678580
DNAR559REPC: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-555-5725
Fluid Pressure Line Multiple Connector

145555725
40004000: RNCC: 3 | RNVC: 2

27 Nov 2007

4730-14-513-8372
Exhaust-Intake Pneumatic Muffler

145138372
346 00 207: RNCC: 3 | RNVC: 2
34600207: RNCC: 5 | RNVC: 2

14 Apr 1999

4730-14-282-2461
Tube To Boss Straight Adapter

142822461
7733: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-514-6324
Tube To Boss Straight Adapter

145146324
3401000001: RNCC: 3 | RNVC: 2
5005330269: RNCC: 5 | RNVC: 2

3 Jun 1999

4730-14-492-4045
Tube To Boss Straight Adapter

144924045
5000489535: RNCC: 3 | RNVC: 2
F300 0T 007 5781: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-417-7790
Tube To Boss Straight Adapter

144177790
LW110-NS2530S: RNCC: 3 | RNVC: 2
84012588NU: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-335-4801
Tube Tee

143354801
Q01R12X6X12: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-340-0897
Tube Tee

143400897
23-6-8X8-10X6-8LAIT0N: RNCC: 3 | RNVC: 2
23-6-8X8-10X6-8LAIT0N: RNCC: 3 | RNVC: 2

18 Jan 1977

4730-14-311-2630

4730-14-453-1074
Lubrication Fitting

144531074
03DR-39108: RNCC: 3 | RNVC: 2
7.18.1.9.19.19.5.20/21BAK-391307: RNCC: 3 | RNVC: 2

5 Feb 1992

4730-14-251-9631
Fluid Passage Bolt

142519631
99641102002: RNCC: 3 | RNVC: 2
25J84: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-525-2973
Quick Disconnect Coupling Half

145252973
NBA.106: RNCC: 3 | RNVC: 2
1989 116 103: RNCC: 5 | RNVC: 2

23 May 2001

4730-14-543-8310
Tube To Boss Straight Adapter

145438310
560502537: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-429-4621
Tube To Boss Straight Adapter

144294621
840919: RNCC: 3 | RNVC: 2

24 Jan 1989

4730-14-428-4682
Tube Tee

144284682
R0806S08Z58: RNCC: 3 | RNVC: 2
R8X6SX8Z58: RNCC: 5 | RNVC: 2

8 Dec 1988

4730-14-459-8848
Swivel Retaining Pipe Flange

144598848
DLT155885: RNCC: 3 | RNVC: 2

22 Dec 1992

4730-14-508-3595
Fluid Flow Restrictor

145083595
5010190477: RNCC: 3 | RNVC: 2

9 Sep 1998

4730-14-417-4577
Fluid Pressure Line Multiple Connector

144174577
109055: RNCC: 2 | RNVC: 2

8 Jul 1987

4730-14-363-4265
Tube Coupling Inverted Nut

143634265
R95403C8D: RNCC: 2 | RNVC: 2
R95403C8D: RNCC: 5 | RNVC: 2
99078566: RNCC: 5 | RNVC: 2
R95403C8D: RNCC: 5 | RNVC: 9

9 May 1980

4730-14-560-5186
Tube Elbow

145605186
241A55: RNCC: 3 | RNVC: 2

28 Apr 2009

4730-14-365-3025

4730-14-345-6595

4730-14-352-4614
Tube To Boss Straight Adapter

143524614
100004166: RNCC: 3 | RNVC: 9

16 Oct 1978

4730-14-404-2908
Quick Disconnect Coupling Half

144042908
CROQ3-85CBECNMACHN: RNCC: 3 | RNVC: 2

18 Sep 1985

4730-14-428-7895
Pipe Flange

144287895
N410-340DN100ACIER: RNCC: 3 | RNVC: 2

21 Dec 1988

4730-14-290-1865
Pipe Flange

142901865
RUAN7625M913P3D: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-468-7202
Lubrication Fitting

144687202
8870007: RNCC: 3 | RNVC: 2
91547429: RNCC: 5 | RNVC: 2

16 Mar 1994

4730-14-260-8798
Sediment Strainer Element

142608798
1503DM2: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-371-0535
Tube Tee

143710535
84500854: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-236-6336
Tube Fitting Clinch Sleeve

142366336
R5018: RNCC: 3 | RNVC: 2
726468: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-492-6378
Tube To Boss Straight Adapter

144926378
TID20819: RNCC: 3 | RNVC: 2
F300 0T 008 3061: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-378-6496
Tube To Boss Straight Adapter

143786496
8901061066: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-436-6078
Fluid Pressure Line Multiple Connector

144366078
A11B532360310: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-542-1920
Fluid Passage Bolt

145421920
10027686: RNCC: 3 | RNVC: 2
10027686: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-339-1506
Pipe Flange

143391506
I131EH20BRIDE: RNCC: 2 | RNVC: 2

17 Dec 1976

4730-14-448-9841
Tube To Boss Straight Adapter

144489841
XGE6PSR: RNCC: 3 | RNVC: 2

24 Jul 1991

4730-14-575-7655
Flange To Flange Straight Adapter

145757655
M2811342420200: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-325-6939
Fluid Passage Bolt

143256939
52S10-20-10: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-390-0060
Bulkhead Hose Connector

143900060
DHS613-622-31: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-362-8284
Piece Raccordement

143628284
GSM166-017F53: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-502-2637
Tube Fitting Locknut

145022637
NSS-CONTRE-ECROU TYPE PALIER: RNCC: 3 | RNVC: 2

3 Dec 1997

4730-14-549-5937
Tube Fitting Insert

145495937
131 KS9234-216,05-495294-C2: RNCC: 3 | RNVC: 2
5010604174: RNCC: 5 | RNVC: 2
131 KS9234-216,05-495294-C2: RNCC: 5 | RNVC: 9

20 Apr 2006

4730-14-458-3595
Tube Tee

144583595
LN329-017REP115: RNCC: 3 | RNVC: 2
LN329-017F19DN33,7EQ: RNCC: 5 | RNVC: 2

20 Oct 1992

4730-14-520-6007
Threaded Tube Fitting Plug

145206007
35511124: RNCC: 3 | RNVC: 2

24 May 2000

4730-14-337-1744
Tube To Boss Straight Adapter

143371744
200264: RNCC: 3 | RNVC: 9

7 Oct 1976

4730-14-552-8122
Flange To Tube Straight Adapter

145528122
04171: RNCC: 3 | RNVC: 2

5 Feb 2007

4730-14-422-3880
Tube To Boss Straight Adapter

144223880
LV126CS2012S: RNCC: 3 | RNVC: 2

3 Mar 1988

4730-14-515-7028
Quick Disconnect Coupling Half

145157028
F8188: RNCC: 3 | RNVC: 2

27 Jul 1999

4730-14-516-4482
Tube To Gas Fitting Straight Adapter

145164482
200666: RNCC: 3 | RNVC: 2

24 Sep 1999

4730-14-340-0907
Pipe Expansion Joint

143400907
26442900400: RNCC: 3 | RNVC: 2
264429004: RNCC: 5 | RNVC: 9
309918: RNCC: 5 | RNVC: 9

18 Jan 1977

4730-14-538-8526
Lubrication Fitting

145388526
NGM0021020400442: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-417-7759
Tube Tee

144177759
Q15T38SNU: RNCC: 3 | RNVC: 2
8404380066NU: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-230-7159
Pipe Flange

142307159
GSM1487DET12: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-230-9759
Pipe Flange

142309759
DLT005863: RNCC: 3 | RNVC: 2
DLT05863: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-375-5058
Tube To Boss Straight Adapter

143755058
130-5-60: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-567-6307
Quick Disconnect Coupling Half

145676307
23REDN/LN320/001 F13 REP.B: RNCC: 2 | RNVC: 2
23REDN/LN320/001DN20 2/B REP.B: RNCC: 5 | RNVC: 2
23RE-LN320001DN20-F13-REP B: RNCC: 5 | RNVC: 2

31 Mar 2011

4730-14-234-9382
Col De Cygne Pour B

142349382
7062RDF2-2-50CA: RNCC: 3 | RNVC: 9

1 Jan 1967

4730-14-405-3849
Fluid Passage Bolt

144053849
NO PRIMARY REF14-405-3849: RNCC: 3 | RNVC: 2
12016XC38: RNCC: 5 | RNVC: 9
12160152: RNCC: 5 | RNVC: 9

27 Nov 1985

4730-14-378-8797
Tube To Boss Straight Adapter

143788797
207534: RNCC: 3 | RNVC: 2
20-0551: RNCC: 5 | RNVC: 2

6 Sep 1982

4730-14-434-2314
Straight Tubing Connector

144342314
085058-03: RNCC: 3 | RNVC: 9
77716140Q: RNCC: 5 | RNVC: 2

13 Sep 1989

4730-14-445-2309
Tube To Boss Straight Adapter

144452309
4A25-33X200SNU: RNCC: 3 | RNVC: 2
ATAS05811NU: RNCC: 5 | RNVC: 2
5005030380: RNCC: 5 | RNVC: 2

6 Feb 1991

4730-14-367-7761
Quick Disconnect Coupling Half

143677761
S2741CD25: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-218-8545
Sediment Strainer Element

142188545
1109S: RNCC: 3 | RNVC: 9
1000740P: RNCC: 5 | RNVC: 9
1109: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-509-2629
Tube Coupling

145092629
0000310890: RNCC: 3 | RNVC: 2

21 Oct 1998

4730-14-376-3544
Pipe Flange

143763544
065-30-9013PL7AREP1: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-450-0605
Sediment Strainer Element

144500605
3100467: RNCC: 3 | RNVC: 2

20 Sep 1991

4730-14-504-0597
Tube Coupling

145040597
NNP4730878750144: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-534-9329
Tube Tee

145349329
BW01ARN80: RNCC: 3 | RNVC: 2
ASA1336: RNCC: 5 | RNVC: 2

16 Apr 2003

4730-14-247-9828
Tube Fitting Brazing Ferrule

142479828
167171: RNCC: 3 | RNVC: 2
167171: RNCC: 5 | RNVC: 2
167171: RNCC: 5 | RNVC: 9
167171: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-230-5970
Tube Coupling Assembly

142305970
3711S16A: RNCC: 3 | RNVC: 2
3711S16A: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-345-2323
Bulkhead Hose Connector

143452323
A11A231253001U1: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-427-4505
Tube Tee

144274505
4730JCING139,7X10-88,9X8: RNCC: 2 | RNVC: 2

20 Oct 1988

4730-14-465-2504
Check Valve Adapter

144652504
CR454090: RNCC: 3 | RNVC: 2
454090: RNCC: 5 | RNVC: 2
EA20157: RNCC: 5 | RNVC: 2

21 Sep 1993

4730-14-462-0184
Fluid Flow Restrictor

144620184
D50910R4: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-493-3544
Fluid Passage Bolt

144933544
6F300 0T 012 5320: RNCC: 3 | RNVC: 2
F300 0T 012 5915: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-446-1939
Flange To Boss Straight Adapter

144461939
PM1A707121130: RNCC: 3 | RNVC: 2
PM1A707121130: RNCC: 5 | RNVC: 2

6 Mar 1991

4730-14-543-0482
Pipe Flange

145430482
43448B: RNCC: 3 | RNVC: 2
43448B: RNCC: 5 | RNVC: 2

18 Aug 2004

4730-14-405-4412
Tube Repair Plug

144054412
T4: RNCC: 3 | RNVC: 2

27 Nov 1985

4730-14-225-1823
Tube Fitting Clinch Sleeve

142251823
G5605-2: RNCC: 3 | RNVC: 9
062075970: RNCC: 5 | RNVC: 9
75970: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-392-5580
Tube To Boss Straight Adapter

143925580
0000252560: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-291-3878
Fluid Passage Bolt

142913878
0000301940: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-549-7831
Tube Tee

145497831
93408400: RNCC: 3 | RNVC: 2
5010631424: RNCC: 5 | RNVC: 2

11 May 2006

4730-14-412-1565
Tube To Boss Straight Adapter

144121565
224607: RNCC: 3 | RNVC: 2

8 Oct 1986

4730-14-298-8043

4730-14-458-0869
Tube Union

144580869
G6S: RNCC: 3 | RNVC: 2

8 Oct 1992

4730-14-399-6602
Pipe Flange

143996602
509607-1REP29: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-429-5348
Quick Disconnect Plug

144295348
RBE03.8550: RNCC: 3 | RNVC: 2
RBE03-8550: RNCC: 5 | RNVC: 2

30 Jan 1989

4730-14-391-6676
Quick Disconnect Coupling Half

143916676
HPXN003-246-76: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-218-2933

4730-14-226-1892

4730-14-464-5404
Tuyau Collier

4730-14-562-5395
Tube To Boss Elbow

145625395
3169 12 21: RNCC: 3 | RNVC: 2
FS0002395: RNCC: 6 | RNVC: 9

3 Nov 2009

4730-14-203-6482
Manchette

142036482
PCA30: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-327-6202
Raccord De Fuite

143276202
0264751530: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-224-6325
Quick Disconnect Coupling Half

142246325
E29572A65BZ: RNCC: 2 | RNVC: 2

1 Jan 1966

4730-14-553-4055
Tube To Hose Straight Adapter

145534055
3114 04 13: RNCC: 3 | RNVC: 2
L3114 04 13: RNCC: 5 | RNVC: 2

30 Mar 2007

4730-14-553-4784
Flange To Boss Elbow

145534784
0319720060: RNCC: 3 | RNVC: 2

5 Apr 2007

4730-14-544-9416
Quick Disconnect Coupling Half

145449416
0581 2024 36: RNCC: 3 | RNVC: 2

7 Mar 2005

4730-14-379-9312
Tube To Boss Straight Adapter

143799312
8129: RNCC: 3 | RNVC: 9

20 Oct 1982

4730-14-430-7175
Bulkhead Hose Connector

144307175
PM1A744100011: RNCC: 3 | RNVC: 2
PM1A744100011: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-365-2864
Quick Disconnect Coupling Assembly

143652864
SJS63CDB: RNCC: 3 | RNVC: 2

19 Sep 1980

4730-14-538-4468
Distilling Nozzle Assembly

145384468
NGM0010037373870: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-339-9863

4730-14-540-6981
Anchor And Reinforcement Pipe Clamp

145406981
38051677: RNCC: 3 | RNVC: 2
ND069516: RNCC: 5 | RNVC: 2
4848ZG8613180661: RNCC: 6 | RNVC: 9

20 Apr 2004

4730-14-494-6967
Fluid Pressure Line Multiple Connector

144946967
NO PRIMARY REF14-494-6967: RNCC: 3 | RNVC: 2
01126138: RNCC: 5 | RNVC: 9
F300 0T 017 7946: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-380-9720
Tube To Boss Straight Adapter

143809720
UMSI6M1-8BSPT: RNCC: 3 | RNVC: 9

14 Dec 1982

4730-14-315-7132
Bulkhead Hose Connector

143157132
321A58-0224-07: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-325-8970
Tube Coupling

143258970
34-15X21-16: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-473-6516
Tube Coupling Assembly

144736516
332A32-3148-20: RNCC: 3 | RNVC: 2

4 Jan 1995

4730-14-390-9867
Tube To Boss Straight Adapter

143909867
NO PRIMARY REF14-390-9867: RNCC: 3 | RNVC: 2
339835-200: RNCC: 5 | RNVC: 9

1 Mar 1984

4730-14-398-5861
Tube Tee

143985861
GSM164-053F7: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-331-9864
Tube To Boss Straight Adapter

143319864
NO PRIMARY REF14-331-9864: RNCC: 3 | RNVC: 2
MT91402879: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-454-3631
Sableuse Complete

144543631
26-0549: RNCC: 3 | RNVC: 2

1 Apr 1992

4730-14-423-4610
Pipe Flange

144234610
UA50088006PN250-11D1SDN32: RNCC: 2 | RNVC: 2
4730HCPN250DN03211D1S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-310-6053
Tube To Boss Straight Adapter

143106053
73-071-109: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-433-0681
Bulkhead Hose Connector

144330681
LW101-NW5275N: RNCC: 3 | RNVC: 2
F0532S4710X0002-5316: RNCC: 3 | RNVC: 2
S4710X0002-5316: RNCC: 5 | RNVC: 9

7 Jul 1989

4730-14-302-5400
Bulkhead Hose Connector

143025400
330A21-2180-00: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-416-3318
Pipe Flange

144163318
E29203-11A-PN16DN40Z2CND17-12: RNCC: 2 | RNVC: 2

3 Jun 1987

4730-14-508-8781
Fluid Pressure Line Multiple Connector

145088781
RB5-8: RNCC: 3 | RNVC: 2
270020010: RNCC: 5 | RNVC: 2

5 Oct 1998

4730-14-554-7086
Tube To Boss Straight Adapter

145547086
19293: RNCC: 3 | RNVC: 2

7 Aug 2007

4730-14-459-5005
Lubricant Pressure Relief Fitting

144595005
14740160N: RNCC: 3 | RNVC: 2

9 Dec 1992

4730-14-543-4891
Hose Connector Sleeve

145434891
F1450988: RNCC: 3 | RNVC: 2

9 Nov 2004

4730-14-538-3652
Tube Coupling Assembly

145383652
NGM0010036233884: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-324-2206
Tube To Boss Straight Adapter

143242206
A28249: RNCC: 3 | RNVC: 2
FS2139: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-371-0473
Tube To Boss Straight Adapter

143710473
84011421: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-449-9996
Tube Tee

144499996
11A10-16X150CO: RNCC: 3 | RNVC: 2
211L05161: RNCC: 5 | RNVC: 2
5005030191: RNCC: 5 | RNVC: 2

18 Sep 1991

4730-14-368-2929
Tube To Boss Straight Adapter

143682929
5000165614: RNCC: 3 | RNVC: 2
5000497768: RNCC: 5 | RNVC: 2
50000497768: RNCC: 5 | RNVC: 9
5000165614: RNCC: 5 | RNVC: 9

20 Feb 1981

4730-14-246-6612
Tube-Hose Fitting Compression Sleeve

142466612
BI004: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-402-1321
Fluid Pressure Line Multiple Connector

144021321
72278: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-277-3754
Fluid Passage Bolt

142773754
9775120001: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-400-2640
Fluid Pressure Line Multiple Connector

144002640
0301020600: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-458-0559
Hydraulic System Accessories Manifold

144580559
SSNGB4S105-A: RNCC: 3 | RNVC: 2
312334A: RNCC: 3 | RNVC: 2

2 Oct 1992

4730-14-412-6498
Raccord D'alim

144126498
DIV/AT1017-2/2-85: RNCC: 3 | RNVC: 2

21 Oct 1986

4730-14-480-3269
Quick Disconnect Coupling Half

144803269
RBE11-1819/0D/IC/3: RNCC: 3 | RNVC: 2
91629905: RNCC: 5 | RNVC: 2
91629905: RNCC: 5 | RNVC: 2

7 Mar 1996

4730-14-390-5177
Purgeur Thermostati

143905177
BP21: RNCC: 3 | RNVC: 2
20738010-16: RNCC: 5 | RNVC: 9
521219: RNCC: 5 | RNVC: 9

26 Jan 1984

4730-14-452-6810
Sediment Strainer Element

144526810
160-112CA35X7: RNCC: 3 | RNVC: 2

15 Jan 1992

4730-14-365-2457
Tube To Boss Straight Adapter

143652457
403-712-218-0: RNCC: 3 | RNVC: 2

19 Sep 1980

4730-14-314-6197
Tube To Boss Straight Adapter

143146197
27-04-12-2: RNCC: 3 | RNVC: 2
27-04-12-2: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-370-2558
Bossa Raccord Coude

143702558
303-963-701-0: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-359-6217
Pipe Flange

143596217
111552500: RNCC: 3 | RNVC: 9
111552-500: RNCC: 5 | RNVC: 9

15 Oct 1979

4730-14-408-7420
Quick Disconnect Coupling Half

144087420
RBE08-2808-0DIAWVDFB: RNCC: 3 | RNVC: 2
RBE8-2808-0DIAWVFB: RNCC: 5 | RNVC: 2

2 Apr 1986

4730-14-494-5450
Tube To Boss Straight Adapter

144945450
641 080 18: RNCC: 3 | RNVC: 2
64108018: RNCC: 5 | RNVC: 2
64108018: RNCC: 5 | RNVC: 2
F300 0T 017 4627: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-414-5014
Tube To Boss Straight Adapter

144145014
84011413NU: RNCC: 3 | RNVC: 2

4 Feb 1987

4730-14-268-7230
Tube Tee

142687230
R8X16SX16: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-382-8810
Tube To Boss Straight Adapter

143828810
PE40201K12: RNCC: 3 | RNVC: 2

2 Aug 2000

4730-14-443-1390
Bulkhead Hose Connector

144431390
DA2C204503911U1: RNCC: 3 | RNVC: 2

7 Nov 1990

4730-14-226-4996
Tube Tee

142264996
702089: RNCC: 3 | RNVC: 9
062058924: RNCC: 5 | RNVC: 9
58924: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-040-0728
Tube Tee

140400728
R101012: RNCC: 3 | RNVC: 2
R10X10X12: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-410-9196
Tube Fitting Brazing Ferrule

144109196
214757: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-472-0733
Tube Fitting Clinch Sleeve

144720733
1A25L: RNCC: 3 | RNVC: 2
101100025: RNCC: 5 | RNVC: 2

5 Oct 1994

4730-14-271-8288
Tube To Boss Straight Adapter

142718288
12-18-21-27CYL: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-453-7778
Tube To Boss Straight Adapter

144537778
072-OC-OL-SM: RNCC: 3 | RNVC: 2

10 Mar 1992

4730-14-426-3095
Tube Tee

144263095
T10S71: RNCC: 3 | RNVC: 2
T10S71: RNCC: 3 | RNVC: 9
T10PS1.4571: RNCC: 5 | RNVC: 9
T10PS71: RNCC: 5 | RNVC: 9

23 Aug 1988

4730-14-573-8886
Tube Cap

145738886
BOFLEX1002: RNCC: 3 | RNVC: 2

19 Nov 2012

4730-14-557-6304
Hose Clamp

145576304
45000038: RNCC: 3 | RNVC: 2

1 Jul 2008

4730-14-568-9757
Swivel Flange To Hose Straight Adapter

145689757
ETS2220: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-278-8148

4730-14-295-1998

4730-14-341-7241

4730-14-427-7546
Fluid Pressure Line Multiple Connector

144277546
41A12L14X150NU: RNCC: 3 | RNVC: 2
91699506: RNCC: 5 | RNVC: 2
5000785632: RNCC: 5 | RNVC: 2

9 Nov 1988

4730-14-422-7282
Tube To Boss Straight Adapter

144227282
0298561610: RNCC: 3 | RNVC: 2

17 Mar 1988

4730-14-359-8992
Bride

143598992
2-18978: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-301-6943
Tube Coupling Assembly

143016943
3801S16A: RNCC: 3 | RNVC: 2
3801S16A: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-340-0906
Pipe Expansion Joint

143400906
26042900005: RNCC: 3 | RNVC: 2
26442900500: RNCC: 5 | RNVC: 2
264429005: RNCC: 5 | RNVC: 9
309917: RNCC: 5 | RNVC: 9

18 Jan 1977

4730-14-396-9391
Tube Tee

143969391
A026060 06 06: RNCC: 3 | RNVC: 2
2090G17G17: RNCC: 5 | RNVC: 9

27 Nov 1984

4730-14-532-4033
Fluid Pressure Line Multiple Connector

145324033
RA1M726228: RNCC: 3 | RNVC: 2

30 Oct 2002

4730-14-532-4032
Fluid Pressure Line Multiple Connector

145324032
RA1M726226: RNCC: 3 | RNVC: 2

30 Oct 2002

4730-14-455-5468
Tube To Boss Straight Adapter

144555468
87560: RNCC: 3 | RNVC: 2

28 May 1992

4730-14-325-9053
Pipe Flange

143259053
AS34TV106REP3: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-525-2176
Fluid Passage Bolt

145252176
06470P065052: RNCC: 3 | RNVC: 2
50006100: RNCC: 3 | RNVC: 2

23 May 2001

4730-14-525-0737
Tube To Hose Straight Adapter

145250737
PE67409LE28: RNCC: 3 | RNVC: 2

16 May 2001

4730-14-358-3586
Hose Coupling Assembly

143583586
1121604000: RNCC: 3 | RNVC: 2
DAH1121604000: RNCC: 5 | RNVC: 9

13 Aug 1979

4730-14-552-8131
Pipe Coupling Leak Repair Clamp

145528131
50152: RNCC: 3 | RNVC: 2

5 Feb 2007

4730-14-413-0094
Pipeline Flexible Spacer

144130094
RWBDN38BR112LONG429,7: RNCC: 3 | RNVC: 2

18 Nov 1986

4730-14-243-1525
Bouchon Filete Spec

142431525
401534: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-268-1203
Pipe Flange

142681203
6784-1DG28-20: RNCC: 2 | RNVC: 2
MEC11201: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-431-9451
Tube Fitting Clinch Sleeve

144319451
OR/C28019934: RNCC: 3 | RNVC: 2
8207-3/4: RNCC: 3 | RNVC: 2
8207-3/4: RNCC: 3 | RNVC: 9
C28019934: RNCC: 5 | RNVC: 2
3/4BSPPRETAINING: RNCC: 5 | RNVC: 9

17 May 1989

4730-14-474-4419
Self-Sealing Coupling Assembly

144744419
RBE11-7153/IC/0/JS3: RNCC: 3 | RNVC: 2
91712038: RNCC: 5 | RNVC: 2
RBE11-71531IC0JS3: RNCC: 5 | RNVC: 9

15 Feb 1995

4730-14-325-8964
Tube To Boss Straight Adapter

143258964
UMB10 1-4BSPC: RNCC: 3 | RNVC: 2
UMB10 1-4C0: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-031-0648
Tube To Boss Straight Adapter

140310648
9114081451: RNCC: 3 | RNVC: 2
9414081458: RNCC: 5 | RNVC: 2
VDP4888: RNCC: 5 | RNVC: 2
A4-8-8-13-51: RNCC: 5 | RNVC: 9

14 Jun 1980

4730-14-215-2425

4730-14-227-3341

4730-14-260-9309

4730-14-247-3269
Raccord Special

142473269
321A75-0848-20: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-269-1830
Pipe Flange

142691830
7066CC1M133: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-551-5419
Fluid Pressure Line Multiple Connector

145515419
710575: RNCC: 3 | RNVC: 2

28 Sep 2006

4730-14-303-8975
Sediment Strainer Body

143038975
505791: RNCC: 3 | RNVC: 9

1 Jan 1973

4730-14-377-8090
Tube To Boss Straight Adapter

143778090
8454046366: RNCC: 3 | RNVC: 2

10 Jun 1982

4730-14-510-0429
Flexible Tube Coupling Assembly

145100429
50079: RNCC: 3 | RNVC: 2
4730AA2048500: RNCC: 6 | RNVC: 9

4 Nov 1998

4730-14-513-3687
Quick Disconnect Coupling Assembly

145133687
64309108: RNCC: 3 | RNVC: 2

17 Mar 1999

4730-14-440-2638
Pipeline Flexible Spacer

144402638
30352: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-391-5515
Sediment Strainer Body

143915515
19433: RNCC: 3 | RNVC: 2
91563723: RNCC: 5 | RNVC: 2
5000658472: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-299-8153
Tube To Boss Straight Adapter

142998153
701MA0002F12REP24: RNCC: 3 | RNVC: 2
701MA002REP24: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-538-7194
Pipe Flange

145387194
NGM0010281516041: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-514-6599
Tube Tee

145146599
10000D30566: RNCC: 3 | RNVC: 2

7 Jun 1999

4730-14-462-6801
Fluid Pressure Line Multiple Connector

144626801
008547291: RNCC: 3 | RNVC: 9
8547291: RNCC: 5 | RNVC: 2

28 Apr 1993

4730-14-346-9776
Fluid Pressure Line Multiple Connector

143469776
A11A532360002U1: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-428-4691
Tube Tee

144284691
R1210S12: RNCC: 3 | RNVC: 2
R12X10SX12: RNCC: 5 | RNVC: 2

8 Dec 1988

4730-14-252-1676
Fluid Pressure Line Multiple Connector

142521676
80336: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-350-6026
Tube To Boss Straight Adapter

143506026
100-377: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-353-7504
Bulkhead Hose Connector

143537504
A11A221172007: RNCC: 3 | RNVC: 2

16 Jan 1979

4730-14-477-5685
Pipe Elbow Assembly

144775685
MEFM340700313: RNCC: 3 | RNVC: 2
23MEFM340700313: RNCC: 5 | RNVC: 2
RAB8680: RNCC: 5 | RNVC: 2

12 Sep 1995

4730-14-247-1698

4730-14-350-0997

4730-14-274-6965

4730-14-408-5469
Corps Usine

144085469
158159: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-349-5183
Manchon Femelle Fem

143495183
510100566: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-569-0996
Anchor And Reinforcement Pipe Clamp

145690996
A551151-R1: RNCC: 3 | RNVC: 2

8 Aug 2011

4730-14-451-8038
Tube-Hose Fitting Compression Sleeve

144518038
TXS20: RNCC: 3 | RNVC: 2
TXS20: RNCC: 3 | RNVC: 9
91713696: RNCC: 5 | RNVC: 2

4 Dec 1991

4730-14-559-1227
Tube Elbow

145591227
82317101: RNCC: 3 | RNVC: 2
7A12CL10NU: RNCC: 5 | RNVC: 9

9 Dec 2008

4730-14-252-2617
Tube Coupling

142522617
ES12-41TF: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-370-1908
Fluid Pressure Line Multiple Connector

143701908
366A54-1017-00: RNCC: 3 | RNVC: 2

7 Mar 1996

4730-14-389-9001
Quick Disconnect Coupling Assembly

143899001
MCR02-6904: RNCC: 3 | RNVC: 2
MCR2-6904: RNCC: 3 | RNVC: 2
91720404: RNCC: 5 | RNVC: 2
MCR02.6904: RNCC: 5 | RNVC: 2
MCR026904: RNCC: 5 | RNVC: 2

26 Jan 1984

4730-14-335-7887
Pipe Flange

143357887
330A75-4209-21: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-301-7200
Pipe Flange

143017200
NO PRIMARY REF14-301-7200: RNCC: 3 | RNVC: 2
124J14: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-524-7319
Pipe Flange

145247319
RPL541-300-025: RNCC: 3 | RNVC: 2

9 Apr 2001

4730-14-338-2537
Tube Fitting Brazing Ferrule

143382537
773-410-109DET10: RNCC: 3 | RNVC: 2
773-410-109DET10: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-367-9914
Pipe Flange

143679914
GSM162-011F12DN65: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-449-4458
Tube To Boss Straight Adapter

144494458
LV118-CP1204N: RNCC: 3 | RNVC: 2

19 Aug 1991

4730-14-242-9774
Tube To Boss Straight Adapter

142429774
UMCAG17X15-21N: RNCC: 3 | RNVC: 2
MCG17-21: RNCC: 3 | RNVC: 2
G12-17-15-21C0: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-252-5164
Tube Fitting Clinch Sleeve

142525164
605-30: RNCC: 3 | RNVC: 2
DL30N: RNCC: 3 | RNVC: 2
1L30: RNCC: 3 | RNVC: 2
BEL30: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-496-3772
Tube To Boss Straight Adapter

144963772
189016: RNCC: 3 | RNVC: 2
F300 0T 021 4650: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-503-1794
Bulkhead Hose Connector

145031794
RA1M543004170A1: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-500-2507
Tube To Boss Straight Adapter

145002507
377648X91: RNCC: 3 | RNVC: 2
F300 0T 024 2563: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-503-2030
Hose Coupling Assembly

145032030
RP1A500055500: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-355-7534
Tube To Boss Straight Adapter

143557534
RT7815B: RNCC: 3 | RNVC: 2

30 Oct 2001

4730-14-427-8645
Quick Disconnect Plug

144278645
WA0612400: RNCC: 3 | RNVC: 2

17 Nov 1988

4730-14-427-4274
Tube Fitting Flared Sleeve

144274274
03670000111519A: RNCC: 3 | RNVC: 2

19 Oct 1988

4730-14-456-7303
Fluid Pressure Line Multiple Connector

144567303
C24266: RNCC: 3 | RNVC: 2

24 Jul 1992

4730-14-554-0395
Tube To Boss Straight Adapter

145540395
372 153: RNCC: 3 | RNVC: 2
372 153: RNCC: 3 | RNVC: 2

7 Jun 2007

4730-14-306-7698

4730-14-330-2076
Crepine De Filtre

143302076
1738DIAM25: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-560-5083
Tube To Boss Straight Adapter

145605083
12 04 45 52 150 NU: RNCC: 3 | RNVC: 2

27 Apr 2009

4730-14-575-4540
Hose Tee

145754540
19176T: RNCC: 3 | RNVC: 2

8 Apr 2013

4730-14-313-4651
Bloc De Raccordemen

143134651
A0191-001: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-248-4215
Bouchon Femelle Tub

142484215
NO PRIMARY REF14-248-4215: RNCC: 3 | RNVC: 2
KB5826: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-295-3278
Crepine Assemblee

142953278
PF222197: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-433-8602
Fuel Feeder Manifold

144338602
5001830055: RNCC: 3 | RNVC: 2
5000133780: RNCC: 5 | RNVC: 2
5000133780: RNCC: 6 | RNVC: 9

18 Aug 1989

4730-14-533-4749
Return Tube Bend

145334749
05A065: RNCC: 3 | RNVC: 2

5 Feb 2003

4730-14-487-5092
Hose Coupling Assembly

144875092
RP1B725214: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-495-7556
Tube Coupling

144957556
101022X06A: RNCC: 3 | RNVC: 9
F300 0T 020 0347: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-371-0509
Tube Tee

143710509
4730AB4.1DN20EQUIPE: RNCC: 2 | RNVC: 2
84042000: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-452-9483
Lubricant Pressure Relief Fitting

144529483
15540151T: RNCC: 3 | RNVC: 2

29 Jan 1992

4730-14-506-9501
Sediment Strainer Element

145069501
FL1023: RNCC: 3 | RNVC: 2

27 May 1998

4730-14-374-3992
Tube Coupling

143743992
7761: RNCC: 3 | RNVC: 9

8 Dec 1981

4730-14-504-0607
Tube Coupling

145040607
NNP4730878750154: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-252-1694

4730-14-443-5904
Tube Coupling

144435904
0000302970: RNCC: 3 | RNVC: 2

28 Nov 1990

4730-14-230-9757
Pipe Flange

142309757
DLT005778: RNCC: 3 | RNVC: 2
DLT05778: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-432-2531
Tube Repair Plug

144322531
NCHX01H013EF5REP1TAMPON: RNCC: 3 | RNVC: 2
NCHX01H013DF5REP1TAMPON: RNCC: 5 | RNVC: 2

31 May 1989

4730-14-399-1355
Return Tube Bend

143991355
616002: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-392-9362
Tube Tee

143929362
0024248659: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-518-5059
Tube To Boss Straight Adapter

145185059
ESPXX000019: RNCC: 3 | RNVC: 9

9 Feb 2000

4730-14-395-3056
Tube Union

143953056
M2L: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-334-2547
Tube Tee

143342547
GSM163-017F49: RNCC: 3 | RNVC: 2
GSM163-17F49: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-388-2808
Fluid Pressure Line Multiple Connector

143882808
SR-100: RNCC: 3 | RNVC: 2
M4ZS500D5685A: RNCC: 5 | RNVC: 2
SR100: RNCC: 5 | RNVC: 2

3 Nov 1983

4730-14-500-6319
Tube To Boss Straight Adapter

145006319
XGE20-SRA3C: RNCC: 3 | RNVC: 2
XGE20SRA3C: RNCC: 3 | RNVC: 2
F300 0T 024 6505: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-356-3577
Collecteur Equipe

143563577
ZL2405: RNCC: 3 | RNVC: 2
AV1507: RNCC: 5 | RNVC: 2

25 Apr 1979

4730-14-460-7908
Quick Disconnect Coupling Half

144607908
N001-220-88: RNCC: 3 | RNVC: 2
N00122088: RNCC: 5 | RNVC: 2

10 Feb 1993

4730-14-558-8909
Pressure Plug Retention Cap

145588909
AE99133G: RNCC: 3 | RNVC: 2

19 Nov 2008

4730-14-444-2589
Lubricant Pressure Relief Fitting

144442589
2-520148-4: RNCC: 3 | RNVC: 2
2-520148-4: RNCC: 5 | RNVC: 9

18 Dec 1990

4730-14-387-8447
Pipe Flange

143878447
NO PRIMARY REF14-387-8447: RNCC: 3 | RNVC: 2
0005-501DN20: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-313-4571
Tube Tee

143134571
Q1-57-12NNNU: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-429-5508
Quick Disconnect Coupling Half

144295508
RBE06-1150/OD: RNCC: 3 | RNVC: 2

30 Jan 1989

4730-14-441-7529
Pipe Flange

144417529
FSP4-62286: RNCC: 3 | RNVC: 2

17 Sep 1990

4730-14-384-8836
Tube To Boss Straight Adapter

143848836
9970-133-231: RNCC: 3 | RNVC: 2

2 Jun 1983

4730-14-509-1786
Tube To Boss Straight Adapter

145091786
KQF04-01: RNCC: 3 | RNVC: 2
ND1662: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-472-3445
Anchor And Reinforcement Pipe Clamp

144723445
2077: RNCC: 3 | RNVC: 2

19 Oct 1994

4730-14-218-8155
Fluid Pressure Line Multiple Connector

142188155
352003: RNCC: 3 | RNVC: 2
9692: RNCC: 5 | RNVC: 2
DBA352003: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-531-9942
Tube To Boss Straight Adapter

145319942
4A812X17CYLCB: RNCC: 3 | RNVC: 2

4 Oct 2002

4730-14-399-6984
Tube To Boss Straight Adapter

143996984
254128: RNCC: 3 | RNVC: 2
254128: RNCC: 5 | RNVC: 9

6 Mar 1985

4730-14-554-1325
Hydraulic Swivel Joint

145541325
352 121: RNCC: 3 | RNVC: 2
352 121: RNCC: 3 | RNVC: 2

12 Jun 2007

4730-14-426-7946
Tube Tee

144267946
4730HEING139,7X6,3-114,3X5,6: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-385-7105
Tube Union

143857105
340GCU16 3-4: RNCC: 3 | RNVC: 2
340GC16 3-4: RNCC: 3 | RNVC: 9

26 Jul 1983

4730-14-423-7561
Double Mamelon

144237561
117447-1: RNCC: 3 | RNVC: 2

28 Apr 1988

4730-14-368-1696
Tube To Boss Straight Adapter

143681696
00 111 04 04: RNCC: 3 | RNVC: 2
4797-4-4: RNCC: 5 | RNVC: 9

20 Feb 1981

4730-14-275-4299

4730-14-564-3662
Tube Elbow

145643662
MDS81F326: RNCC: 3 | RNVC: 2

26 Apr 2010

4730-14-578-4800
Tube Reducer

145784800
8001006: RNCC: 3 | RNVC: 2

3 Dec 2013

4730-14-365-9526

4730-14-362-8287
Embout Raccordement

143628287
GSM166-017F10: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-408-8588
Embout Tube

144088588
SKIFFY45-10NOIR: RNCC: 3 | RNVC: 2
A1-6068REP14: RNCC: 5 | RNVC: 2

2 Apr 1986

4730-14-370-0578
Equ Flexi Bride Fix

143700578
F06369-21: RNCC: 3 | RNVC: 2
F06369-21: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-561-0687
Pipe To Tube Swivel Joint

145610687
42A38/38X150NU: RNCC: 3 | RNVC: 2
693010140: RNCC: 5 | RNVC: 2
5010117734: RNCC: 5 | RNVC: 2

11 Jun 2009

4730-14-338-3906
Pipe Flange

143383906
I131E175BRIDE: RNCC: 2 | RNVC: 2

6 Nov 1976

4730-14-503-4102
Air Hose Connector

145034102
10306133: RNCC: 3 | RNVC: 2

14 Jan 1998

4730-14-276-7857
Fluid Pressure Line Multiple Connector

142767857
A15228: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-283-8411
Sediment Strainer Element

142838411
P4784: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-374-7792
Tube-Hose Fitting Compression Sleeve

143747792
0400390030: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-563-4347
Reducing Tube Coupling Nut

145634347
680022: RNCC: 3 | RNVC: 2

8 Feb 2010

4730-14-282-1235

4730-14-542-3268
Self-Sealing Coupling Half

145423268
1762300: RNCC: 3 | RNVC: 2

8 Jul 2004

4730-14-309-4678
Tube To Boss Straight Adapter

143094678
41481: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-274-6608
Tube-Hose Fitting Compression Sleeve

142746608
7062CE1F3B66UE10R1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-475-9285
Fluid Pressure Line Multiple Connector

144759285
99630081207: RNCC: 3 | RNVC: 2

10 May 1995

4730-14-282-4850
Fluid Pressure Line Multiple Connector

142824850
109-8Z246: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-303-4360
Bulkhead Hose Connector

143034360
171546: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-464-1386
Fluid Passage Bolt

144641386
VD1011: RNCC: 3 | RNVC: 9
211111208: RNCC: 5 | RNVC: 2
2111112080000: RNCC: 5 | RNVC: 2
211111208: RNCC: 5 | RNVC: 2

15 Jul 1993

4730-14-344-6327
Fluid Pressure Line Multiple Connector

143446327
205027: RNCC: 3 | RNVC: 2
BFCSAMM205027: RNCC: 5 | RNVC: 2

9 Sep 1977

4730-14-277-6228

4730-14-571-6397
Flange To Tube Elbow

145716397
M2821303400000: RNCC: 3 | RNVC: 2

17 Apr 2012

4730-14-576-3245
Quick Disconnect Coupling Half

145763245
1989 066 806: RNCC: 3 | RNVC: 2

12 Jun 2013

4730-14-576-3801
Tube Nipple

145763801
10620355: RNCC: 3 | RNVC: 1

14 Jun 2013

4730-14-523-3029
Raccord Bloc

145233029
9001DAG4121204A: RNCC: 3 | RNVC: 2

10 Jan 2001

4730-14-474-3223
Branched Tubing Connector

144743223
0176-764034: RNCC: 3 | RNVC: 2

8 Feb 1995

4730-14-350-4066
Tube Tee

143504066
213483: RNCC: 3 | RNVC: 2
MAF0001003337: RNCC: 6 | RNVC: 9

12 Jul 1978

4730-14-514-6345
Tube Tee

145146345
124L15188: RNCC: 3 | RNVC: 2

3 Jun 1999

4730-14-499-5448
Fuel Feeder Manifold

144995448
A26082130: RNCC: 3 | RNVC: 2
F300 0T 023 5164: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-330-8008

4730-14-351-1139
Tube To Boss Straight Adapter

143511139
6817247-000: RNCC: 3 | RNVC: 2

10 Aug 1978

4730-14-483-6108
Quick-Disconnect Nipple

144836108
702A30-5500-25: RNCC: 3 | RNVC: 2

24 Sep 1996

4730-14-361-2460
Fluid Pressure Line Multiple Connector

143612460
F12375-43: RNCC: 3 | RNVC: 2

24 Jan 1980

4730-14-525-6268
Tube To Boss Straight Adapter

145256268
20 236 910 9060: RNCC: 3 | RNVC: 2
236-910-9060: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-557-3587
Packing Nut

145573587
616-007: RNCC: 3 | RNVC: 2

4 Jun 2008

4730-14-401-8317
Bulkhead Hose Connector

144018317
GSM426-010F67: RNCC: 3 | RNVC: 2

13 Jun 1985

4730-14-516-5483
Housse Antifeu

145165483
99/339/001/REVB/DN50: RNCC: 3 | RNVC: 2
MN-50P16NT1: RNCC: 3 | RNVC: 2

4 Oct 1999

4730-14-431-7479
Pipe Flange

144317479
E29203-01B-PN16DN400Z2CND17-12: RNCC: 2 | RNVC: 2
4730HADN400: RNCC: 5 | RNVC: 2

10 May 1989

4730-14-347-3068
Tube To Boss Straight Adapter

143473068
UMI30-33X200N: RNCC: 3 | RNVC: 2
MS30-33X2: RNCC: 3 | RNVC: 2
Q2-12-30-33X200: RNCC: 3 | RNVC: 2
4I30-33X200: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-444-9973
Tube To Boss Straight Adapter

144449973
F8BRAB12M16: RNCC: 3 | RNVC: 2
F8BRAB12M16: RNCC: 3 | RNVC: 9
0946677553: RNCC: 5 | RNVC: 2
F8BRA12M16: RNCC: 5 | RNVC: 9
F8BRA12M16X1-5: RNCC: 5 | RNVC: 9

30 Jan 1991

4730-14-324-4555
Fluid Pressure Line Multiple Connector

143244555
245A: RNCC: 3 | RNVC: 2
1623-6-205B: RNCC: 3 | RNVC: 9
1623-6-205B: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-396-3321
Tube To Boss Straight Adapter

143963321
F50XS14-7/8: RNCC: 3 | RNVC: 2
F50XS14 7-8: RNCC: 5 | RNVC: 2
921147730: RNCC: 5 | RNVC: 2

27 Nov 1984

4730-14-392-4629
Tube Tee

143924629
SBMB6-1/4: RNCC: 3 | RNVC: 2
SBMB6-1/4: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-346-7031
Bride Speciale

143467031
6784-1CL20: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-430-0303
Tube To Gas Fitting Straight Adapter

144300303
2119210-13A: RNCC: 3 | RNVC: 2

24 Feb 1989

4730-14-263-1096
Pipe Flange

142631096
11787-45: RNCC: 3 | RNVC: 2
581202-2S: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-490-1608
Tube To Boss Straight Adapter

144901608
81117600: RNCC: 3 | RNVC: 2
106101243: RNCC: 5 | RNVC: 2
0024248721: RNCC: 5 | RNVC: 2
5005130061: RNCC: 5 | RNVC: 2
6A14L-12-17FNU: RNCC: 5 | RNVC: 2
F300 0T 007 2903: RNCC: 6 | RNVC: 9

17 Sep 1997

4730-14-530-5613
Tube To Boss Straight Adapter

145305613
G2401-12E: RNCC: 3 | RNVC: 2

24 Jun 2002

4730-14-488-9880
Tube To Boss Straight Adapter

144889880
00 151 16 12: RNCC: 3 | RNVC: 2
4781-16-12: RNCC: 5 | RNVC: 9

18 Jun 1997

4730-14-287-7943
Pipe Flange

142877943
6784-2CE20: RNCC: 2 | RNVC: 2

1 Jan 1972

4730-14-447-4872
Pipe Flange

144474872
LN327-016-11B-PN50DN20: RNCC: 3 | RNVC: 2

24 May 1991

4730-14-543-8547
Return Tube Bend

145438547
1000006063: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-504-5275
Special-Shaped Hose Clamp

145045275
1820366C91: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-487-5424
Bulkhead Hose Connector

144875424
RA1M521203130: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-460-2090
Fluid Pressure Line Multiple Connector

144602090
BJL WCYL6: RNCC: 3 | RNVC: 9

15 Jan 1993

4730-14-494-1773
Flange To Tube Straight Adapter

144941773
5000681476: RNCC: 3 | RNVC: 2
F300 0T 015 8641: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-512-8179
Tube Coupling

145128179
205205: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-457-6185
Flange To Hose Straight Adapter

144576185
PM1A758220010: RNCC: 3 | RNVC: 2
PM1A758220010: RNCC: 5 | RNVC: 2

10 Sep 1992

4730-14-250-9548
Fluid Pressure Line Multiple Connector

142509548
80424: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-478-4182
Fluid Passage Bolt

144784182
18893: RNCC: 3 | RNVC: 2
18893: RNCC: 5 | RNVC: 2

31 Oct 1995

4730-14-350-5886
Fluid Passage Bolt

143505886
MKM0421002: RNCC: 3 | RNVC: 2
MKM0421002: RNCC: 5 | RNVC: 2

12 Jul 1978

4730-14-553-1248
Sediment Strainer Body

145531248
0249862070: RNCC: 3 | RNVC: 2

5 Mar 2007

4730-14-478-2943
Hydraulic Swivel Joint

144782943
WH06LRA3C: RNCC: 3 | RNVC: 2
WH06LRA3C: RNCC: 3 | RNVC: 9
WH06PLRA3C: RNCC: 5 | RNVC: 9

20 Oct 1995

4730-14-466-2840
Pressure Plug Retention Cap

144662840
256692: RNCC: 3 | RNVC: 2

3 Nov 1993

4730-14-514-6506
Tube Coupling

145146506
10000D30478: RNCC: 3 | RNVC: 2

4 Jun 1999

4730-14-531-6262
Quick-Disconnect Nipple

145316262
TA5012P015: RNCC: 3 | RNVC: 2

4 Sep 2002

4730-14-252-2927
Fluid Pressure Line Multiple Connector

142522927
220056: RNCC: 3 | RNVC: 2
220056: RNCC: 5 | RNVC: 2
220056: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-525-5021
Pipe Flange

145255021
E75140230: RNCC: 3 | RNVC: 2
V75140230: RNCC: 5 | RNVC: 9

6 Jun 2001

4730-14-348-1406
Tuyauter Obturateur

143481406
60BRT267-6: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-294-6426
Tube-Hose Fitting Compression Sleeve

142946426
11137910Z: RNCC: 3 | RNVC: 2
13791: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-379-6568

4730-14-261-2329

4730-14-562-5283
Tube To Boss Elbow

145625283
3199 12 21: RNCC: 3 | RNVC: 2
FS0002375: RNCC: 6 | RNVC: 9

3 Nov 2009

4730-14-381-0412

4730-14-260-4183
Corps Raccord Auto-

142604183
A74212: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-547-0798
Tube To Boss Straight Adapter

145470798
P519PH1206: RNCC: 3 | RNVC: 2

21 Sep 2005

4730-14-213-5817
Tube Coupling Assembly

142135817
3601S16A: RNCC: 3 | RNVC: 2
3601S16A: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-471-6896
Tube To Hose Straight Adapter

144716896
77353: RNCC: 3 | RNVC: 2

7 Sep 1994

4730-14-230-0601
Bague Speciale

142300601
86060: RNCC: 3 | RNVC: 2
9567157610: RNCC: 5 | RNVC: 2
RFL86060: RNCC: 5 | RNVC: 2
85-599-6500: RNCC: 6 | RNVC: 9

1 Jan 1967

4730-14-218-3052
Tube To Gas Fitting Straight Adapter

142183052
12-25-21-27C0: RNCC: 3 | RNVC: 2
UMCA25X20-27N: RNCC: 3 | RNVC: 2
4A25-21-27C0: RNCC: 3 | RNVC: 2
MC25-27: RNCC: 3 | RNVC: 2
12-25-21X27C0: RNCC: 5 | RNVC: 2
99-621-25-238-1: RNCC: 5 | RNVC: 2
99621252381: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-427-0337
Pipe Flange

144270337
MAT162-0022DN80FEM: RNCC: 3 | RNVC: 2
MAT162-0022F12: RNCC: 3 | RNVC: 2

5 Oct 1988

4730-14-250-0656

4730-14-231-0852
Bride Speciale

142310852
NO PRIMARY REF14-231-0852: RNCC: 3 | RNVC: 2
17586: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-561-1504
Tube To Boss Straight Adapter

145611504
UMA ISO 14X18-150: RNCC: 3 | RNVC: 2
02101062: RNCC: 5 | RNVC: 2

22 Jun 2009

4730-14-403-0382
Quick Disconnect Coupling Half

144030382
RBE11-21030D6: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-570-4348
Sediment Strainer Element

145704348
5000814907: RNCC: 1 | RNVC: 2
A0103S: RNCC: 3 | RNVC: 2

15 Dec 2011

4730-14-301-5790

4730-14-330-6535

4730-14-334-1422

4730-14-307-3979
Pipe Flange

143073979
DLT082149: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-388-7585
Tube Coupling

143887585
RM008+BI008: RNCC: 3 | RNVC: 2
M4ZS500D5682: RNCC: 5 | RNVC: 2

29 Nov 1983

4730-14-374-3972
Tube Fitting Clinch Sleeve

143743972
41241000: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-350-2694
Tube Fitting Clinch Sleeve

143502694
81241000: RNCC: 3 | RNVC: 2

14 Jun 1978

4730-14-290-4549
Self-Sealing Coupling Half

142904549
714F230: RNCC: 3 | RNVC: 2
714F230: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-215-1545

4730-14-265-6800
Demi-Pipe Dintercom

142656800
40717: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-416-5845
Pipe Flange

144165845
4730GG-DN88,9: RNCC: 2 | RNVC: 2
MEC10419: RNCC: 3 | RNVC: 2
4730GG-DN88,9: RNCC: 5 | RNVC: 2

19 Jun 1987

4730-14-496-5537
Tube To Boss Straight Adapter

144965537
518365: RNCC: 3 | RNVC: 2
F300 0T 021 6590: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-557-9066
Tube Coupling Nut

145579066
5BMTXS: RNCC: 3 | RNVC: 2
5BMTXS: RNCC: 5 | RNVC: 9

29 Jul 2008

4730-14-322-6368

4730-14-395-2293
Raccordement Bloc

143952293
GSM523-085: RNCC: 3 | RNVC: 2
A0191-017: RNCC: 5 | RNVC: 2

2 Oct 1984

4730-14-337-7766
Raccord Soupl Ecrou

143377766
82283-1A: RNCC: 3 | RNVC: 2
650-485-209-0: RNCC: 5 | RNVC: 2

6 Nov 1976

Load More Results