What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 142 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 142 of 185

4730-14-468-2579
Pipeline Flexible Spacer

144682579
30339-09: RNCC: 3 | RNVC: 2

16 Feb 1994

4730-14-283-3952
Raccord Tournant

142833952
A24930-10: RNCC: 3 | RNVC: 2
A24930-10: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-212-3946
Threaded Tube Fitting Plug

142123946
RE1-03: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-283-5493
Quick Disconnect Coupling Half

142835493
AQ-4M: RNCC: 3 | RNVC: 2
AQ4M: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-446-6617
Quick Disconnect Coupling Half

144466617
RBE11-1819: RNCC: 3 | RNVC: 2

9 Apr 1991

4730-14-346-7086
Jeu De Bagues

143467086
6784-1DM114-3: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-252-9749
Tube To Boss Straight Adapter

142529749
9GAZC012-14XG1-2: RNCC: 3 | RNVC: 2
9GAZC012-14XG1-2: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-430-4336
Tube Tee

144304336
BN329-512TEEG26,9-2,11: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-441-6575
Tube Union

144416575
G16SA3C: RNCC: 3 | RNVC: 2
G16SA3C: RNCC: 3 | RNVC: 9
226480: RNCC: 5 | RNVC: 2
G16-S: RNCC: 5 | RNVC: 2
G16PS: RNCC: 5 | RNVC: 9

10 Sep 1990

4730-14-276-2063
Jeu De Bagues

142762063
6784-1DM80: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-407-4282
Tube To Boss Straight Adapter

144074282
UFA25X26-34N: RNCC: 3 | RNVC: 2
13-25-26-34: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-209-5439
Coude Pour Tube Equ

4730-14-041-5081
Diaphragme

140415081
6784-1CI20-900: RNCC: 2 | RNVC: 2

1 Jan 1974

4730-14-298-4829

4730-14-564-5428
Tube Nipple

145645428
G28LCFX: RNCC: 3 | RNVC: 2
A231004000298: RNCC: 5 | RNVC: 2

5 May 2010

4730-14-365-9577

4730-14-513-7776
Tube To Boss Straight Adapter

145137776
NO PRIMARY REF 14-513-7776: RNCC: 3 | RNVC: 2
2701-06-13.10: RNCC: 5 | RNVC: 9

14 Apr 1999

4730-14-370-0599
Tube To Boss Straight Adapter

143700599
V14375-88: RNCC: 3 | RNVC: 2
V14375-88: RNCC: 3 | RNVC: 2
209473: RNCC: 5 | RNVC: 2

18 May 1981

4730-14-577-2840

4730-14-504-1457
Tube To Boss Swivel Joint

145041457
GA47693-100: RNCC: 3 | RNVC: 2

10 Feb 1998

4730-14-392-3675
Tube Union

143923675
735-510-109: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-441-8056

4730-14-505-8724

4730-14-293-6368

4730-14-459-3003
Embout A Visser

144593003
DLT129314: RNCC: 3 | RNVC: 2
RAR1607: RNCC: 5 | RNVC: 2

24 Nov 1992

4730-14-397-6988
Embout A Souder

143976988
GSM164-060F2REP2: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-474-8394
Bossage Sonde

144748394
ME2K: RNCC: 3 | RNVC: 2
956712: RNCC: 5 | RNVC: 2

8 Mar 1995

4730-14-365-9793

4730-14-389-0672
Corps De Purge

143890672
TB30-52022-000: RNCC: 3 | RNVC: 2
TB30-52022-000: RNCC: 5 | RNVC: 2

29 Nov 1983

4730-14-371-0374
Piece Raccordement

143710374
GSM164-006F23: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-532-8767

4730-14-516-0236

4730-14-262-1438

4730-14-561-7881
Tube Reducer

145617881
14155: RNCC: 3 | RNVC: 2

7 Sep 2009

4730-14-561-3452
Tube To Boss Straight Adapter

145613452
1511153: RNCC: 3 | RNVC: 2

7 Jul 2009

4730-14-310-0725

4730-14-367-7813

4730-14-573-2586
Hose To Gas Fitting Straight Adapter

145732586
1CJ22080: RNCC: 3 | RNVC: 2

26 Sep 2012

4730-14-367-7994

4730-14-367-7804

4730-14-367-7303

4730-14-320-2092
Raccord Special

143202092
NO PRIMARY REF14-320-2092: RNCC: 3 | RNVC: 2
308117: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-523-3507
Pipe Flange

145233507
E29203-11B-PN40DN25BF42: RNCC: 2 | RNVC: 2
32635034: RNCC: 3 | RNVC: 9

11 Jan 2001

4730-14-397-0867
Fluid Pressure Line Multiple Connector

143970867
D7N06-90M: RNCC: 3 | RNVC: 2
0000302650: RNCC: 5 | RNVC: 2

1 Dec 1984

4730-14-358-6066
Tube Tee

143586066
Q0-3R7610: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-304-4639
Bulkhead Hose Connector

143044639
F721-19: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-461-3984
Fluid Flow Restrictor Unit

144613984
A230-71140: RNCC: 3 | RNVC: 2
A230-71140: RNCC: 5 | RNVC: 2

10 Mar 1993

4730-14-547-4869
Quick Disconnect Coupling Half

145474869
K07-63-203: RNCC: 3 | RNVC: 2

14 Oct 2005

4730-14-345-4855
Threaded Tube Fitting Plug

143454855
02019300: RNCC: 3 | RNVC: 2
78869042: RNCC: 5 | RNVC: 2
201-93-00: RNCC: 5 | RNVC: 2
91352037: RNCC: 5 | RNVC: 2

5 Oct 1977

4730-14-558-8660
Tube To Boss Straight Adapter

145588660
FTXS12-1/2: RNCC: 3 | RNVC: 2
FTXS12-1/2: RNCC: 5 | RNVC: 2

18 Nov 2008

4730-14-249-8113
Tube-Hose Fitting Compression Sleeve

142498113
4016273: RNCC: 3 | RNVC: 2
510317: RNCC: 5 | RNVC: 2
1469-3: RNCC: 5 | RNVC: 2
1469-3: RNCC: 5 | RNVC: 9
4016273: RNCC: 5 | RNVC: 9
510317: RNCC: 6 | RNVC: 9

1 Jan 1968

4730-14-484-9944
Bague Presse Etoupe

144849944
K6867-NV1753-6: RNCC: 3 | RNVC: 2

19 Dec 1996

4730-14-555-0070
Tube Coupling

145550070
MAT164-0126F01: RNCC: 3 | RNVC: 2

18 Sep 2007

4730-14-574-2096
Moisture Trap

145742096
NO PRIMARY REF 14-574-2096: RNCC: 3 | RNVC: 2
91928956: RNCC: 5 | RNVC: 2
DM10-41CB: RNCC: 5 | RNVC: 2

17 Dec 2012

4730-14-495-4622
Union

144954622
NO PRIMARY REF14-495-4622: RNCC: 3 | RNVC: 2
T43758-3: RNCC: 5 | RNVC: 9
F300 0T 019 2977: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-365-2899

4730-14-537-6192
Tube Coupling

145376192
20-7-E-30CA-3344-017-001REP3: RNCC: 3 | RNVC: 2

12 Nov 2003

4730-14-559-3912
Hose Clamp

145593912
NSA5522-122-142: RNCC: 1 | RNVC: 2
25-2-060-008: RNCC: 3 | RNVC: 2
MINOXM7: RNCC: 5 | RNVC: 9

6 Jan 2009

4730-14-331-7740
Tube To Boss Straight Adapter

143317740
501-729-120-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-276-6395
Equerre Orientable

142766395
Q1-5509-20-24X150NN: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-561-2858
Tube Reducer

145612858
82367979000: RNCC: 3 | RNVC: 2

2 Jul 2009

4730-14-243-6137

4730-14-259-4241
Vis Creuse Pour Flu

142594241
NO PRIMARY REF14-259-4241: RNCC: 3 | RNVC: 2
NSR5304-1X: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-427-0214
Aspiration Crepine

4730-14-261-8490
Pipe Flange

142618490
RUHB4-10: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-268-8929
Tube To Boss Straight Adapter

142688929
631X4229: RNCC: 3 | RNVC: 2
U15-4S631X4229: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-546-3248
Straight Tubing Connector

145463248
558135: RNCC: 3 | RNVC: 2

24 Jun 2005

4730-14-325-9020
Pipe Flange

143259020
AS34TV107REP12: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-562-5438
Tube To Boss Tee

145625438
3198 12 21: RNCC: 3 | RNVC: 2
FS0002422: RNCC: 6 | RNVC: 9

3 Nov 2009

4730-14-307-6343
Ense Valve Jonction

143076343
DC609: RNCC: 3 | RNVC: 1

1 Jan 1974

4730-14-345-0269
Fluid Pressure Line Multiple Connector

143450269
200006: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-372-2534
Tube-Hose Fitting Compression Sleeve

143722534
TMAB16: RNCC: 3 | RNVC: 2
0024255273: RNCC: 5 | RNVC: 2
0024255273: RNCC: 5 | RNVC: 9
24255273: RNCC: 5 | RNVC: 9

1 Sep 1981

4730-14-230-0072
Tube Coupling Inverted Nut

142300072
0571346: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-308-8995

4730-14-330-8810

4730-14-287-0072
Raccord

142870072
6103-2503: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-468-3992
Tube Coupling Inverted Nut

144683992
Q881R5506: RNCC: 3 | RNVC: 2
85-695-0352: RNCC: 6 | RNVC: 9

23 Feb 1994

4730-14-496-9886
Fluid Pressure Line Multiple Connector

144969886
NO PRIMARY REF14-496-9886: RNCC: 3 | RNVC: 2
50-4973: RNCC: 5 | RNVC: 9
F300 0T 022 3967: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-364-6671
Fluid Pressure Line Multiple Connector

143646671
043-04-51: RNCC: 3 | RNVC: 2

2 Sep 1980

4730-14-276-9167
Quick Disconnect Coupling Half

142769167
E29572D25BZ: RNCC: 2 | RNVC: 2
9686-02-253: RNCC: 3 | RNVC: 2
4091-25X30: RNCC: 5 | RNVC: 9
9686-02-253: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-304-4678
Bulkhead Hose Connector

143044678
F726-002: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-509-1017
Tube To Boss Straight Adapter

145091017
118215.12.12: RNCC: 3 | RNVC: 2
19204711: RNCC: 5 | RNVC: 9
118215-12-12: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-299-0802
Tube To Boss Straight Adapter

142990802
A23097-5: RNCC: 3 | RNVC: 2
A23097-5: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-547-0806
Swivel Flange To Hose Connector

145470806
7-1000-235: RNCC: 3 | RNVC: 2

21 Sep 2005

4730-14-408-8551
Fluid Passage Bolt

144088551
4-580046-4: RNCC: 3 | RNVC: 2
4-580046-4: RNCC: 5 | RNVC: 9

2 Apr 1986

4730-14-268-1232
Plaque De Reduction

142681232
6784-1DH50-10: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-354-0868
Fluid Flow Restrictor Unit

143540868
B14BA1040-020: RNCC: 3 | RNVC: 2
B14BA1040-020: RNCC: 5 | RNVC: 2
B14BA1040-020: RNCC: 5 | RNVC: 9

16 Jan 1979

4730-14-303-4625
Raccord De Rempliss

143034625
71-43679: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-575-9347
Pipe To Tube Straight Adapter

145759347
NO PRIMARY REF 14-575-9347: RNCC: 3 | RNVC: 2
002R004C: RNCC: 5 | RNVC: 2

16 May 2013

4730-14-349-0712

4730-14-287-7947
Porte-Joint Complet

142877947
6784-2DN25: RNCC: 2 | RNVC: 2

1 Jan 1972

4730-14-223-8494
Barillet Air Compri

142238494
10030-39-120: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-576-1294
Non-Metallic Connecting Sleeve

145761294
ABS1150A16-060: RNCC: 1 | RNVC: 2
ABS1150A16-060: RNCC: 3 | RNVC: 2
ABS1150A16-060: RNCC: 5 | RNVC: 2

30 May 2013

4730-14-573-4943
Drainage Pipe Trap

145734943
NO PRIMARY REF 14-573-4943: RNCC: 3 | RNVC: 2
5052.8201: RNCC: 5 | RNVC: 2

17 Oct 2012

4730-14-573-0513
Tube Reducer

145730513
REDUC00030: RNCC: 3 | RNVC: 2

7 Sep 2012

4730-14-417-2822
Couple Reducteur

144172822
K24.0-128: RNCC: 3 | RNVC: 2
192-6206: RNCC: 5 | RNVC: 2
B24R128: RNCC: 5 | RNVC: 2

1 Jul 1987

4730-14-265-1012
Quick Disconnect Coupling Half

142651012
9949426A: RNCC: 3 | RNVC: 2
TAHM755S4-718-12D: RNCC: 5 | RNVC: 2
9949426: RNCC: 5 | RNVC: 2
9949426: RNCC: 5 | RNVC: 2
9-94-94-26: RNCC: 5 | RNVC: 9
9949426: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-337-5710
Pipe Flange

143375710
521587: RNCC: 3 | RNVC: 2

7 Oct 1976

4730-14-459-8841
Pipe Flange

144598841
DLT118531: RNCC: 3 | RNVC: 2

22 Dec 1992

4730-14-503-1816
Bulkhead Hose Connector

145031816
RA1M543304180A1: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-566-0261
Hose Clamp

145660261
CS 021XX0100: RNCC: 3 | RNVC: 2

13 Oct 2010

4730-14-384-3882
Pipe Flange

143843882
000MA1064F15: RNCC: 3 | RNVC: 2

4 May 1983

4730-14-297-8967
Bloc De Derivation

142978967
411MA0162FB32: RNCC: 3 | RNVC: 2
411MA162FB32: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-438-4346
Embout Detendeur Eq

144384346
39581620: RNCC: 3 | RNVC: 2

21 Mar 1990

4730-14-578-0260
Tube Elbow

145780260
M3831300200000: RNCC: 3 | RNVC: 2

23 Oct 2013

4730-14-365-9662

4730-14-234-3466

4730-14-416-9078
Tube Tee

144169078
F530-05-13: RNCC: 3 | RNVC: 2

25 Jun 1987

4730-14-391-8373
Tube Tee

143918373
798B08-10-10TJC: RNCC: 3 | RNVC: 2
DHS613-646-33: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-042-8771
Fluid Passage Bolt

140428771
RA13210-12X100: RNCC: 3 | RNVC: 2
99058274: RNCC: 5 | RNVC: 2

5 Aug 1981

4730-14-277-6212
Tube To Boss Straight Adapter

142776212
7062BB1B1966RCET2-20UA9: RNCC: 4 | RNVC: 1

1 Jan 1971

4730-14-235-0905
Quick Disconnect Coupling Half

142350905
E29572E50BZ: RNCC: 2 | RNVC: 2
705DN50FILETE50X60PDGBR0NZE: RNCC: 3 | RNVC: 2
JEA16-02: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-484-4418
Tube Fitting Brazing Ferrule

144844418
110P160: RNCC: 3 | RNVC: 2
4206: RNCC: 5 | RNVC: 2
AS45052/03: RNCC: 5 | RNVC: 2

14 Nov 1996

4730-14-423-4124
Pipe Flange

144234124
UA50088006PN50-11C1DN125: RNCC: 2 | RNVC: 2
4730HCPN50DN12511C1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-498-7283
Tube To Boss Straight Adapter

144987283
NO PRIMARY REF14-498-7283: RNCC: 3 | RNVC: 2
12-10-04-216: RNCC: 5 | RNVC: 9
121004216: RNCC: 5 | RNVC: 9
F300 0T 008 2231: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-375-2208

4730-14-367-0289

4730-14-345-5376
Fluid Pressure Line Multiple Connector

143455376
0000302180: RNCC: 3 | RNVC: 2
85-800-5908: RNCC: 6 | RNVC: 9

5 Oct 1977

4730-14-452-4114
Bulkhead Hose Connector

144524114
EA1M524-45M1: RNCC: 3 | RNVC: 2

8 Jan 1992

4730-14-494-8063
Tube To Boss Straight Adapter

144948063
NO PRIMARY REF14-494-8063: RNCC: 3 | RNVC: 2
1884016: RNCC: 5 | RNVC: 9
F300 0T 017 9276: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-249-8467
Tube To Boss Straight Adapter

142498467
R700-22: RNCC: 3 | RNVC: 2
4P07W99-339: RNCC: 5 | RNVC: 2
PR21371: RNCC: 5 | RNVC: 2
0003620442: RNCC: 5 | RNVC: 2
3620442: RNCC: 5 | RNVC: 9
0003620442: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-310-4264
Tube Repair Plug

143104264
K1712DREP10TAMH16: RNCC: 3 | RNVC: 2
K79-12REP15TAMP0N: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-413-4421
Quick-Disconnect Nipple

144134421
NO PRIMARY REF14-413-4421: RNCC: 3 | RNVC: 2
T41332: RNCC: 5 | RNVC: 9

16 Dec 1986

4730-14-468-3993
Tube To Boss Straight Adapter

144683993
R120610100Z165: RNCC: 3 | RNVC: 2
85-695-0354: RNCC: 6 | RNVC: 9

23 Feb 1994

4730-14-321-4499
Raccord Souple

143214499
E074GF5-6-16-17: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-521-7092
Tube To Boss Straight Adapter

145217092
171 751 17: RNCC: 3 | RNVC: 2
171-751-17: RNCC: 5 | RNVC: 2

6 Sep 2000

4730-14-277-3027
Tube-Hose Fitting Compression Sleeve

142773027
7062CE1F2B41-5XC38: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-406-8739
Fluid Filter Element

144068739
NO PRIMARY REF14-406-8739: RNCC: 3 | RNVC: 2
SHB479103351W00: RNCC: 5 | RNVC: 9

8 Jan 1986

4730-14-423-4020
Pipe Flange

144234020
UA50088006PN20-12D2DN50: RNCC: 2 | RNVC: 2
4730HBPN20DN05012D2: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-497-0275
Fluid Pressure Line Multiple Connector

144970275
50-4930: RNCC: 3 | RNVC: 2
F300 0T 022 5743: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-303-1265
Bulkhead Hose Connector

143031265
M3C222-14-05: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-512-3674
Sediment Strainer Element

145123674
NO PRIMARY REF14-512-3674: RNCC: 3 | RNVC: 2
NNP 2950860395071: RNCC: 5 | RNVC: 9

10 Feb 1999

4730-14-231-5753
Anchor And Reinforcement Pipe Clamp

142315753
NO PRIMARY REF14-231-5753: RNCC: 3 | RNVC: 2
840T20X27: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-287-4939
Self-Sealing Coupling Half

142874939
433F0052-15066023: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-365-3433

4730-14-349-0909
Noyau Tournant

143490909
3047636: RNCC: 3 | RNVC: 2

19 Apr 1978

4730-14-348-6275

4730-14-303-5723
Raccord Tournant

143035723
A24937-1: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-382-0687
Tube Tee

143820687
134 3-8: RNCC: 3 | RNVC: 2
AFY56 3-8: RNCC: 5 | RNVC: 2

25 Jan 1983

4730-14-240-3801
Raccord De Gonflage

142403801
1310-6-50: RNCC: 3 | RNVC: 2
1310-6-50: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-322-9658
Sediment Strainer Element

143229658
121E93-145-47-1: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-559-9283
Pipe Flange

145599283
5010045361: RNCC: 1 | RNVC: 2
1.505877: RNCC: 3 | RNVC: 2
25314652: RNCC: 5 | RNVC: 2

5 Mar 2009

4730-14-345-8862
Raccord Pivot Corps

143458862
A77122-1: RNCC: 3 | RNVC: 2

5 Nov 1977

4730-14-422-1684
Cone De Reduction

144221684
192RA12-8: RNCC: 3 | RNVC: 2
2192111208: RNCC: 5 | RNVC: 2

24 Feb 1988

4730-14-389-4037
Tube-Hose Fitting Compression Sleeve

143894037
TMAB12PT23UMAB8-5-12: RNCC: 3 | RNVC: 2
2609600Y: RNCC: 5 | RNVC: 2

20 Dec 1983

4730-14-263-6371
Tube Coupling

142636371
7062BC1RPET1-36A52-3: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-262-1423
Pipe Flange

142621423
7062DG1F1F152-3-5XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-338-2574
Graisseur Equerre

143382574
5013000-8X125: RNCC: 3 | RNVC: 2
ALG5013000-8X125: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-440-1223
Bride A Zinc

144401223
MAT162-0117F12: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-335-9616
Fluid Pressure Line Multiple Connector

143359616
121A77-150-01-0: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-206-6008
Tube To Boss Straight Adapter

142066008
613-407-002-0: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-325-7786
Cart Bride Fixation

143257786
FH92-000-08: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-446-1355
Canne Plon Fourreau

144461355
1390-52-01: RNCC: 3 | RNVC: 2
91627181: RNCC: 5 | RNVC: 2

6 Mar 1991

4730-14-417-0097
Pipe Flange

144170097
E29203-11A-PN16DN125Z2CND17-12: RNCC: 2 | RNVC: 2

25 Jun 1987

4730-14-503-2102
Tube Tee

145032102
723.D.06.06.06S: RNCC: 3 | RNVC: 2
P166D060606S: RNCC: 3 | RNVC: 2
723D06 06 06S: RNCC: 5 | RNVC: 2
723D06-06-06S: RNCC: 5 | RNVC: 2
723D060606S: RNCC: 5 | RNVC: 2
74723D060606S: RNCC: 5 | RNVC: 2
74723D060606S: RNCC: 5 | RNVC: 2
723 D 06 06 06S: RNCC: 5 | RNVC: 2

7 Jan 1998

4730-14-200-1751

4730-14-326-3704
Tube To Boss Straight Adapter

143263704
Q00308-34: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-508-3356
Fluid Flow Restrictor

145083356
121-730-14-06: RNCC: 3 | RNVC: 2

4 Sep 1998

4730-14-439-0879
Raccord Flexible

144390879
GSM166-010F37: RNCC: 3 | RNVC: 2

25 Apr 1990

4730-14-223-2878
Bloc De Purge Circu

142232878
A10-77-010-01-0: RNCC: 3 | RNVC: 2
A10-77-010-01-0: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-386-5482
Tube To Boss Straight Adapter

143865482
132232: RNCC: 3 | RNVC: 2
25-132232-0: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-400-3763
Self-Sealing Coupling Half

144003763
671E10-1: RNCC: 3 | RNVC: 2
613-988-735-0: RNCC: 5 | RNVC: 2
671E10-1: RNCC: 5 | RNVC: 9
85-801-1617: RNCC: 6 | RNVC: 9

24 Apr 1985

4730-14-440-5723
Tube Tee

144405723
LN326-045REP07: RNCC: 3 | RNVC: 2
LN326-045 26,9-10,2-26,9: RNCC: 5 | RNVC: 2

18 Jul 1990

4730-14-216-2778
Fluid Pressure Line Multiple Connector

142162778
9776-12-07-39: RNCC: 3 | RNVC: 2
9776120739: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-529-1933
Pipe To Gas Fitting Straight Adapter

145291933
1832T20-95-48: RNCC: 3 | RNVC: 2

15 Mar 2002

4730-14-566-0698
Quick Disconnect Coupling Assembly Parts Kit

145660698
5089-102: RNCC: 3 | RNVC: 2

15 Oct 2010

4730-14-462-1337
Manchette Inox

144621337
LN326-059-06-06DN25: RNCC: 3 | RNVC: 2
RAB0839: RNCC: 5 | RNVC: 2

6 Apr 1993

4730-14-360-9074

4730-14-304-8070
Self-Sealing Coupling Half

143048070
S075-0-1-2-1-4: RNCC: 3 | RNVC: 2
S0750 1-2 1-4: RNCC: 5 | RNVC: 2
908847: RNCC: 5 | RNVC: 9
85-641-6650: RNCC: 6 | RNVC: 9

1 Jan 1974

4730-14-365-9383

4730-14-268-5038

4730-14-465-9456
Quick Disconnect Coupling Half

144659456
S01R01-001: RNCC: 3 | RNVC: 2

20 Oct 1993

4730-14-290-2286
Bulkhead Hose Connector

142902286
330A55-9808-20: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-462-0246
Quick Disconnect Coupling Half

144620246
A72815-16: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-269-1925
Pipe Flange

142691925
7066CE1M108: RNCC: 2 | RNVC: 2
4730BC-108M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-248-9861
Bride Pleine Pour T

4730-14-511-3446
Hydraulic System Accessories Manifold

145113446
D65717-1: RNCC: 3 | RNVC: 2

16 Dec 1998

4730-14-335-7315

4730-14-294-5173

4730-14-321-9610
Partie Mobile

143219610
GSM425-024F7: RNCC: 3 | RNVC: 2
A0009-024F4: RNCC: 5 | RNVC: 2
GSM425-24F7: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-387-0683
Croix Tube Ebauche

143870683
4730-50-25: RNCC: 2 | RNVC: 2
ST1675A25: RNCC: 5 | RNVC: 2

24 Aug 1983

4730-14-334-2491
Tube Tee

143342491
GSM163-015F21: RNCC: 3 | RNVC: 2
GSM163-15F21: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-384-4601
Bulkhead Hose Connector

143844601
M11-10BDIAM14MM: RNCC: 3 | RNVC: 2

4 May 1983

4730-14-368-0524
Quick Disconnect Coupling Half

143680524
SH8-63: RNCC: 3 | RNVC: 2
SH8-63: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-505-3127
Swivel Flange To Hose Elbow

145053127
EW10-PL-0MD: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-252-5166
Tube Tee

142525166
Q1-5TR30X14X30: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-423-4581
Pipe Flange

144234581
UA50088006PN150-11D1SDN40: RNCC: 2 | RNVC: 2
4730HCPN150DN04011D1S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-472-8944
Return Tube Bend

144728944
332A72-2472-00: RNCC: 3 | RNVC: 2

16 Nov 1994

4730-14-355-5584
Tube To Boss Straight Adapter

143555584
1DM14 3-8BGS: RNCC: 3 | RNVC: 2
AA14X3-8BGSN: RNCC: 3 | RNVC: 2

19 Mar 1979

4730-14-372-2730
Tube To Boss Straight Adapter

143722730
UMA6X8-13NNU: RNCC: 3 | RNVC: 2
4A6-8-13CYLNU: RNCC: 3 | RNVC: 2
12-6-8-13CYLNU: RNCC: 3 | RNVC: 2
P2-12-6-8-13CYLNU: RNCC: 5 | RNVC: 2

1 Sep 1981

4730-14-401-5256
Tube Tee

144015256
EL20SREDA3CX: RNCC: 3 | RNVC: 2
EL20SREDA3CX: RNCC: 3 | RNVC: 2
XEVL20SRED: RNCC: 5 | RNVC: 2
4-7510-04: RNCC: 5 | RNVC: 9
4751004: RNCC: 5 | RNVC: 9

13 Jun 1985

4730-14-339-9932

4730-14-330-8809

4730-14-202-6544

4730-14-391-8952
Racco Clapet Equipe

143918952
433-000: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-568-4425
Pipe Flange

145684425
B1-004: RNCC: 3 | RNVC: 2
MBH1159: RNCC: 5 | RNVC: 2
MBH1159: RNCC: 5 | RNVC: 2

31 May 2011

4730-14-256-0546
Raccord Vabco

142560546
UFB14-3-8CYUA9NFEM: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-427-3362
Tube Tee

144273362
4730HDING323,9X7,1-139,7X4: RNCC: 2 | RNVC: 2

13 Oct 1988

4730-14-262-1662

4730-14-282-3031

4730-14-504-0682
Quick Disconnect Coupling Half

145040682
5400-S2-4: RNCC: 3 | RNVC: 2
CS1.003.421: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-310-4349
Raccord Special

143104349
FF1-4GAZCYL5MM: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-255-4949
Raccord

142554949
321A75-2043-20: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-561-9507
Hose Clamp

145619507
CBA1 14 24-36: RNCC: 3 | RNVC: 2

18 Sep 2009

4730-14-259-7339
Raccord Equipe

142597339
NO PRIMARY REF14-259-7339: RNCC: 3 | RNVC: 2
19835: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-550-1072
Tube Tee

145501072
GS47051-100: RNCC: 3 | RNVC: 2

1 Jun 2006

4730-14-378-1545
Fluid Pressure Line Multiple Connector

143781545
A660001: RNCC: 3 | RNVC: 2
A660-001: RNCC: 5 | RNVC: 2
85-692-0206: RNCC: 6 | RNVC: 9

20 Jul 1982

4730-14-359-6667
Tube Coupling

143596667
205857001: RNCC: 3 | RNVC: 2
PAA58-57-001: RNCC: 5 | RNVC: 2

15 Oct 1979

4730-14-416-3077
Tube To Boss Straight Adapter

144163077
4730AJ4.4DN10NU: RNCC: 2 | RNVC: 2
Q15GE10S1/4BSPK NU: RNCC: 3 | RNVC: 2
MEC10817: RNCC: 3 | RNVC: 2
8905101366NU: RNCC: 5 | RNVC: 2

3 Jun 1987

4730-14-294-9290
Tube Fitting Brazing Ferrule

142949290
7062BB1B1966EMT2-10CUB: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-305-9036
Fluid Passage Bolt

143059036
201C0-0062REP13: RNCC: 3 | RNVC: 2
201C0-0064REP13: RNCC: 5 | RNVC: 2
201C0-062REP13: RNCC: 5 | RNVC: 2
201C0-064REP13: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-355-5567
Tube To Boss Straight Adapter

143555567
AA10X16-150N: RNCC: 3 | RNVC: 2
5A10/16X150: RNCC: 3 | RNVC: 2
1DM10-16X150: RNCC: 3 | RNVC: 2
205104161: RNCC: 5 | RNVC: 2
0024288703: RNCC: 5 | RNVC: 2
5005030645: RNCC: 5 | RNVC: 2

19 Mar 1979

4730-14-327-3568
Tube Fitting Brazing Ferrule

143273568
43211-40DEA: RNCC: 2 | RNVC: 2
3501-40: RNCC: 3 | RNVC: 2
L43211-40DEA: RNCC: 5 | RNVC: 2
L44211A40DEA3: RNCC: 5 | RNVC: 2
3501-40: RNCC: 5 | RNVC: 9
85-662-8250: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-222-6531
Tube Fitting Brazing Ferrule

142226531
GSM1297F1AF1BTABLEAU1D1-30I25: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-336-4715
Fluid Passage Bolt

143364715
0608300800: RNCC: 3 | RNVC: 2
0608300800: RNCC: 3 | RNVC: 2
0608300800: RNCC: 5 | RNVC: 9

14 Aug 1976

4730-14-452-0723
Lubrication Fitting

144520723
86-07-379-11: RNCC: 3 | RNVC: 9

18 Dec 1991

4730-14-367-2776
Diaphragme De Bride

143672776
GSM772-001F27: RNCC: 3 | RNVC: 2

11 Dec 1980

4730-14-473-9627
Tube To Boss Straight Adapter

144739627
5A16-22X150: RNCC: 3 | RNVC: 2
205104310: RNCC: 5 | RNVC: 2
202369900410: RNCC: 5 | RNVC: 2
5005030529: RNCC: 5 | RNVC: 2

18 Jan 1995

4730-14-265-9498
Threaded Tube Fitting Plug

142659498
631X2104: RNCC: 3 | RNVC: 2
P2-10-631X2104: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-530-4831
Quick Disconnect Coupling Half

145304831
BH8-60: RNCC: 3 | RNVC: 2

17 Jun 2002

4730-14-309-4785
Tube Fitting Flared Sleeve

143094785
GSM183-002F21: RNCC: 3 | RNVC: 2
000MA051REP16: RNCC: 5 | RNVC: 2
GSM1708REP1: RNCC: 5 | RNVC: 2
GSM1708REP1TUBE15X9: RNCC: 5 | RNVC: 2
GSM183-02F21: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-572-6558
Hose Clamp

145726558
TORRO WF35-50/12 C7 W3: RNCC: 3 | RNVC: 2
B009872: RNCC: 5 | RNVC: 2
137 7708 043: RNCC: 5 | RNVC: 2

20 Jul 2012

4730-14-495-3597
Anchor And Reinforcement Pipe Clamp

144953597
P4024266C: RNCC: 3 | RNVC: 2
C4024266: RNCC: 5 | RNVC: 2
C40242-66: RNCC: 5 | RNVC: 9
F300 0T 019 1278: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-317-9901
Jeu Demi-Manchons

143179901
L40.311.GB.06: RNCC: 3 | RNVC: 2
L40-311GB06: RNCC: 5 | RNVC: 2
L40GB311-06: RNCC: 5 | RNVC: 2
L40GB31106: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-376-5901
Tube To Boss Straight Adapter

143765901
59-13-1060: RNCC: 3 | RNVC: 2
5000496191: RNCC: 5 | RNVC: 2
59131060: RNCC: 5 | RNVC: 9
5000496191: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-263-1866
Douille Speciale

142631866
2134019: RNCC: 3 | RNVC: 2
2134019: RNCC: 5 | RNVC: 2
2-13-40-19: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-384-4319
Pipe Flange

143844319
E64-35-3200-122BF9-22ETF10-22DN-: RNCC: 3 | RNVC: 1

4 May 1983

4730-14-323-7242
Tube-Pipe Fitting Kit

143237242
333-090-581-0: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-367-0184

4730-14-325-9042
Pipe Flange

143259042
AS34TV102REP9: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-382-8724
Tube To Boss Straight Adapter

143828724
PE60801H22: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-525-6269
Tube To Boss Straight Adapter

145256269
20 236 910 9120: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-483-8320
Fluid Flow Restrictor

144838320
420639: RNCC: 3 | RNVC: 2
420639: RNCC: 5 | RNVC: 2
420639: RNCC: 5 | RNVC: 9

3 Oct 1996

4730-14-366-6054

4730-14-366-5948

4730-14-439-0134
Quick Disconnect Coupling Half

144390134
RBE06-6414: RNCC: 3 | RNVC: 2
RBE6-6414: RNCC: 5 | RNVC: 2

18 Apr 1990

4730-14-493-5782
Racc0rd

144935782
1301-1B5WM250: RNCC: 3 | RNVC: 2
F300 0T 013 6696: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-287-5118

4730-14-231-3385

4730-14-287-4940
Self-Sealing Coupling Half

142874940
434F0052-15066022: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-368-1095
Self-Sealing Coupling Assembly

143681095
RBE3-7904IC: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-430-2708
Tube To Boss Straight Adapter

144302708
MAT535-0004F5: RNCC: 3 | RNVC: 2

15 Mar 1989

4730-14-238-4119
Fluid Pressure Line Multiple Connector

142384119
10920-2Z129: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-540-9251
Fluid Passage Bolt

145409251
021744: RNCC: 3 | RNVC: 2
21744: RNCC: 5 | RNVC: 2
EN000341: RNCC: 6 | RNVC: 9

5 May 2004

4730-14-500-2505
Tube To Boss Straight Adapter

145002505
377633X91: RNCC: 3 | RNVC: 2
F300 0T 024 2561: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-233-3409
Raccord Droit De Bo

142333409
3180S73-03-002: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-225-9735
Tube To Boss Straight Adapter

142259735
A2-69211: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-356-6280

4730-14-387-8833
Bulkhead Hose Connector

143878833
726.B.08.08S.BP: RNCC: 3 | RNVC: 2
P426B0808SBP: RNCC: 3 | RNVC: 2
164728: RNCC: 5 | RNVC: 2
726 B 08 08S BP: RNCC: 5 | RNVC: 2
726B08-08SBP: RNCC: 5 | RNVC: 2
726B0808SBP: RNCC: 5 | RNVC: 2
726B08 08SBP: RNCC: 5 | RNVC: 2
74726B0808SBP: RNCC: 5 | RNVC: 2
74726B0808SBP: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-252-5629

4730-14-339-9926

4730-14-282-8258

4730-14-552-3875
Flexible Tube Coupling Assembly

145523875
711B0808Z2: RNCC: 3 | RNVC: 2

18 Dec 2006

4730-14-229-2155
Flange To Boss Straight Adapter

142292155
278147: RNCC: 3 | RNVC: 2
278147: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-512-2825
Lubrication Fitting Adapter

145122825
200891: RNCC: 3 | RNVC: 2

10 Feb 1999

4730-14-397-7166
Quick Disconnect Coupling Half

143977166
1020105DN20: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-237-5440
Flexible Tube Coupling Assembly

142375440
L25F3: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-552-1132
Straight Tubing Connector

145521132
0249922510: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-401-3290
Bulkhead Hose Connector

144013290
0285273340: RNCC: 3 | RNVC: 2

5 Jun 1985

4730-14-502-7461
Return Tube Bend

145027461
5P4476: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-403-0369
Tube Fitting Flared Sleeve

144030369
1270800: RNCC: 3 | RNVC: 2
91517997: RNCC: 5 | RNVC: 2

25 Jul 1985

4730-14-508-3477
Tube Coupling

145083477
7705030062: RNCC: 3 | RNVC: 2

8 Sep 1998

4730-14-554-2193
Tube To Boss Straight Adapter

145542193
357 118: RNCC: 3 | RNVC: 2
357 118: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-14-551-7648
Tube Fitting Flared Sleeve

145517648
PSR22LX: RNCC: 3 | RNVC: 2
437268: RNCC: 5 | RNVC: 2
PSR22LX: RNCC: 5 | RNVC: 9

20 Oct 2006

4730-14-504-0631
Tube Coupling

145040631
NNP4730878750174: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-518-4169
Air Hose Connector

145184169
1094851S01: RNCC: 3 | RNVC: 2

4 Feb 2000

4730-14-578-1735
Tube To Boss Straight Adapter

145781735
F4PB6-1/4: RNCC: 3 | RNVC: 2
F4PB6-1/4: RNCC: 5 | RNVC: 2

6 Nov 2013

4730-14-525-6328
Tube Tee

145256328
20 236 915 5120: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-526-0846
Tube-Hose Fitting Compression Sleeve

145260846
TM0678G001: RNCC: 3 | RNVC: 2

3 Jul 2001

4730-14-401-7513
Tube Coupling

144017513
E4033F: RNCC: 3 | RNVC: 2

13 Jun 1985

4730-14-276-7858
Tube Tee

142767858
A15229: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-230-4815
Fluid Pressure Line Multiple Connector

142304815
327864105: RNCC: 3 | RNVC: 9
75569: RNCC: 5 | RNVC: 9
32786B: RNCC: 5 | RNVC: 9
327864105: RNCC: 5 | RNVC: 9
062075569: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-459-8855
Compressed Gas Cylinder Valve Connections Adapter

144598855
424994: RNCC: 3 | RNVC: 2

22 Dec 1992

4730-14-260-9313

4730-14-314-2389
Bossage

143142389
0261450070: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-566-1237
Fluid-Emulsion Spray Nozzle

145661237
N32 095 44H: RNCC: 3 | RNVC: 2

20 Oct 2010

4730-14-225-1168
Raccord Multiple Co

142251168
479E204: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-546-3749
Tube Union

145463749
5005130155: RNCC: 3 | RNVC: 2

28 Jun 2005

4730-14-367-7338

4730-14-233-3890
Quick Disconnect Coupling Assembly

142333890
SDS0-100BAG: RNCC: 3 | RNVC: 2
SDS02-98-100Z: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-330-2274
Fluid Pressure Line Multiple Connector

143302274
J00650-01-0230P002: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-262-1795

4730-14-350-1363
Pipe Flange

143501363
7062TD1F1M108UA9NFEM: RNCC: 2 | RNVC: 2
4730CG-108M: RNCC: 5 | RNVC: 2

14 Jun 1978

4730-14-414-2328
Pipe Flange

144142328
U1240-11B2SPN100DN80Z2CND17-12T3: RNCC: 3 | RNVC: 2

27 Jan 1987

4730-14-246-2844
Tube Tee

142462844
721-200-109: RNCC: 3 | RNVC: 2
21-20-01DN40: RNCC: 5 | RNVC: 2
285-6192: RNCC: 5 | RNVC: 2
721-200-109: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-318-9261
Tube To Boss Straight Adapter

143189261
A582-009: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-369-6297
Quick Disconnect Coupling Half

143696297
RBE11-6153: RNCC: 3 | RNVC: 2
RBE11-6153: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-362-1239
Pipe Flange

143621239
U1198F4-30Z2CND17-13: RNCC: 2 | RNVC: 2

20 Feb 1980

4730-14-361-5645
Sediment Strainer Element

143615645
L253-5M887-5P16: RNCC: 3 | RNVC: 2

24 Jan 1980

4730-14-041-2536
Tube To Boss Straight Adapter

140412536
N410-78: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-510-8524
Pipe Flange

145108524
3091515010: RNCC: 3 | RNVC: 2

18 Nov 1998

4730-14-491-8644
Tube To Boss Straight Adapter

144918644
423537: RNCC: 3 | RNVC: 2
F300 0T 005 7577: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-572-8649
Boss Outlet

145728649
0298530760: RNCC: 3 | RNVC: 2

20 Aug 2012

4730-14-528-6093
Tube Fitting Socket Welded Ferrule

145286093
54300025: RNCC: 3 | RNVC: 2
8025885A00: RNCC: 5 | RNVC: 2

30 Jan 2002

4730-14-500-4799
Tube Tee

145004799
L518028: RNCC: 3 | RNVC: 2
DBAL518028: RNCC: 5 | RNVC: 9
F300 0T 024 4969: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-342-5992

4730-14-242-8009

4730-14-367-7880

4730-14-570-6774
Quick Disconnect Coupling Half

145706774
G540041-6-8: RNCC: 3 | RNVC: 2

17 Jan 2012

4730-14-273-5381
Pipe Flange

142735381
7062TD1F1M191-6UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-345-2741
Bulkhead Hose Connector

143452741
FF1A781-001: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-370-4648
Quick Disconnect Coupling Half

143704648
CMT30E9047PL1TYPEA-REP2ALLIAGALU: RNCC: 3 | RNVC: 2
CMT30L9047-2AALLIAGEALU: RNCC: 5 | RNVC: 2

18 May 1981

4730-14-298-1775
Tube To Boss Straight Adapter

142981775
NO PRIMARY REF14-298-1775: RNCC: 3 | RNVC: 2
87473: RNCC: 5 | RNVC: 9
00-270-4610: RNCC: 6 | RNVC: 9

1 Jan 1973

4730-14-312-9521
Flange To Hose Straight Adapter

143129521
ECEMAT72-03REDUCTEUR100-80: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-569-8338
Pipe Tee

145698338
130.1"1/4: RNCC: 3 | RNVC: 2

24 Oct 2011

4730-14-202-0206
Bouchon Darbre A Ca

142020206
0000118187: RNCC: 3 | RNVC: 2
0000118187: RNCC: 5 | RNVC: 9
118187: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-14-479-1817
Tube Fitting Socket Welded Ferrule

144791817
FI 4.61.63.01: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-447-9467
Pressure Plug Retention Cap

144479467
2-50246: RNCC: 3 | RNVC: 2

10 Jun 1991

4730-14-490-1553
Tube Tee

144901553
111--1/4: RNCC: 3 | RNVC: 2
900866: RNCC: 5 | RNVC: 2

17 Sep 1997

4730-14-414-8398
Opercule

144148398
1-50-69: RNCC: 3 | RNVC: 2

12 Mar 1987

4730-14-562-5424
Pipeline Flexible Spacer

145625424
0429065: RNCC: 3 | RNVC: 2
A1/200/KR320-WG/E: RNCC: 3 | RNVC: 2

3 Nov 2009

4730-14-532-8670
Quick Disconnect Coupling Half

145328670
NP708867: RNCC: 3 | RNVC: 2
CH F 02 1"1/4 A A V: RNCC: 5 | RNVC: 2

10 Jan 2003

4730-14-309-2272
Self-Sealing Coupling Half

143092272
9949411A: RNCC: 3 | RNVC: 2
332A95-5200-20: RNCC: 5 | RNVC: 2
TAHM155S4-718-8D: RNCC: 5 | RNVC: 2
9-94-94-11A: RNCC: 5 | RNVC: 9
85-801-5990: RNCC: 6 | RNVC: 9

1 Jan 1974

4730-14-355-5649

4730-14-521-1802
Special-Shaped Hose Clamp

145211802
9138054: RNCC: 3 | RNVC: 2

12 Jul 2000

4730-14-575-3223
Sediment Strainer Element

145753223
0301511170: RNCC: 3 | RNVC: 2

27 Mar 2013

4730-14-561-6073
Return Tube Bend

145616073
16M33C8OMLOS: RNCC: 3 | RNVC: 2
20 250 100 3010: RNCC: 5 | RNVC: 2

4 Aug 2009

4730-14-564-2623
Fluid Passage Bolt

145642623
27020: RNCC: 3 | RNVC: 2

20 Apr 2010

4730-14-452-9467
Flange To Pipe Straight Adapter

144529467
13617120S: RNCC: 3 | RNVC: 2

29 Jan 1992

4730-14-229-2154
Raccord A Bride Spe

142292154
278146: RNCC: 3 | RNVC: 2
278146: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-571-3948
Flexible Tube Coupling Assembly

145713948
20803361: RNCC: 3 | RNVC: 2

21 Mar 2012

4730-14-262-7188
Bouchon Pour Accoup

142627188
NO PRIMARY REF14-262-7188: RNCC: 3 | RNVC: 2
121L176: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-465-1232
Cale De Reglage

144651232
MAT166-0059F9: RNCC: 3 | RNVC: 2

15 Sep 1993

4730-14-304-7116

4730-14-365-2916
Special Nipple

143652916
403-712-281-0: RNCC: 3 | RNVC: 2

18 Sep 1980

4730-14-442-6614
Fluid Passage Bolt

144426614
9101-216: RNCC: 3 | RNVC: 9
7700745660: RNCC: 5 | RNVC: 2
8090727: RNCC: 5 | RNVC: 2
ROT9101-216: RNCC: 5 | RNVC: 9

24 Oct 1990

4730-14-339-9702
Tube Tee

143399702
GSM163-017F39: RNCC: 3 | RNVC: 2
GSM163-17F39: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-332-8932
Tube Fitting Clinch Sleeve

143328932
105 08: RNCC: 3 | RNVC: 2
105-8P: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-334-2487
Tube Tee

143342487
GSM163-015F16: RNCC: 3 | RNVC: 2
GSM163-15F16: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-535-4573
Self-Sealing Coupling Half

145354573
NP708866: RNCC: 3 | RNVC: 2

26 May 2003

4730-14-535-6389
Tube To Boss Straight Adapter

145356389
81114601: RNCC: 3 | RNVC: 2
5005030926: RNCC: 5 | RNVC: 2

11 Jun 2003

4730-14-040-2963
Tube To Boss Straight Adapter

140402963
NO PRIMARY REF14-040-2963: RNCC: 3 | RNVC: 2
210957: RNCC: 5 | RNVC: 2
RT7816: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-346-7087
Porte-Joint Complet

143467087
6784-1DN114-3: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-347-3070
Tube Coupling

143473070
270CU12: RNCC: 3 | RNVC: 2
270C12: RNCC: 3 | RNVC: 9

19 Jan 1978

4730-14-535-3634
Tube To Boss Straight Adapter

145353634
81409301: RNCC: 3 | RNVC: 2
5005130451: RNCC: 5 | RNVC: 2

22 May 2003

4730-14-325-6802
Tube Tee

143256802
0000365040: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-554-1922
Tube-Hose Fitting Compression Sleeve

145541922
356 022: RNCC: 3 | RNVC: 2
356 022: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-14-541-8166
Tube To Boss Straight Adapter

145418166
1020.08.10.13: RNCC: 3 | RNVC: 2
LX1156A00: RNCC: 5 | RNVC: 2

26 Jun 2004

4730-14-361-6821
Tube To Boss Straight Adapter

143616821
5000118337: RNCC: 3 | RNVC: 2
5000118337: RNCC: 5 | RNVC: 9
5000118337: RNCC: 6 | RNVC: 9

20 Feb 1980

4730-14-503-6446
Pipeline Flexible Spacer

145036446
2CW1992: RNCC: 3 | RNVC: 2
ASC1362021: RNCC: 5 | RNVC: 9

21 Jan 1998

4730-14-554-5833
Flange To Tube Straight Adapter

145545833
9943600120: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-229-1017
Bouchon De Boite A

142291017
0000044618: RNCC: 3 | RNVC: 2
0000044618: RNCC: 5 | RNVC: 9
44618: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-433-3764
Tube Fitting Brazing Ferrule

144333764
DLT024685: RNCC: 3 | RNVC: 2
DLT565191BREP16FOLIO14-1/3: RNCC: 5 | RNVC: 2

24 Jul 1989

4730-14-276-2337
Fluid Pressure Line Multiple Connector

142762337
9-96609: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-422-0911
Tube To Gas Fitting Straight Adapter

144220911
DE2020GMF: RNCC: 3 | RNVC: 2

23 Feb 1988

4730-14-307-6374
Tube Fitting Brazing Ferrule

143076374
R32924SMEMB0UT: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-279-1660
Fluid Pressure Line Multiple Connector

142791660
200097: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-466-0248
Tube To Boss Straight Adapter

144660248
35314614675: RNCC: 3 | RNVC: 2
52360268: RNCC: 3 | RNVC: 2
RV3F083F03CCPA: RNCC: 5 | RNVC: 2
RV3F083F06INOX: RNCC: 5 | RNVC: 2

27 Oct 1993

4730-14-322-8046

4730-14-315-6888

4730-14-576-1864
Flange To Tube Elbow

145761864
M2821352300000: RNCC: 3 | RNVC: 2

4 Jun 2013

4730-14-439-2691
Bulkhead Hose Connector

144392691
DA2C240732001: RNCC: 3 | RNVC: 2

25 Apr 1990

4730-14-400-2638
Tube Tee

144002638
0301020420: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-557-2813
Tube Reducer

145572813
0R/C28002456: RNCC: 3 | RNVC: 2

29 May 2008

4730-14-230-7138
Pipe Flange

142307138
GSM1947REP13FEMELLE: RNCC: 3 | RNVC: 2
GSM1947DET13FEMELLE: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-273-5288

4730-14-464-2171
Tube-Pipe Fitting Kit

144642171
1009994P01: RNCC: 3 | RNVC: 2

28 Jul 1993

4730-14-463-2474
Manchette Double

144632474
LN326-056-02DN8: RNCC: 3 | RNVC: 2

2 Jun 1993

4730-14-247-3615
Tamis Filtre A Sedi

142473615
60131-40201: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-339-1066
Barillet A 4 Voies

143391066
SR7-02-01-22: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-236-9154
Tube To Boss Straight Adapter

142369154
100666: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-362-2678
Tube To Boss Straight Adapter

143622678
114133: RNCC: 3 | RNVC: 2

30 Oct 2001

4730-14-470-2803
Sediment Strainer Element

144702803
BSNGCFF005F9B: RNCC: 3 | RNVC: 2

14 Jun 1994

4730-14-270-5108
Sediment Strainer Element

142705108
556673: RNCC: 3 | RNVC: 9

1 Jan 1970

4730-14-562-9086
Tube Union

145629086
G38ZSCF: RNCC: 3 | RNVC: 2
G38ZSA3C: RNCC: 3 | RNVC: 9

3 Dec 2009

4730-14-577-8586
Straight Tubing Connector

145778586
0164030830: RNCC: 3 | RNVC: 2

15 Oct 2013

4730-14-496-4324
Graisseur

144964324
269: RNCC: 3 | RNVC: 2
F300 0T 021 5239: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-465-0788
Graisseur

144650788
217885A: RNCC: 3 | RNVC: 2
AMG217885A: RNCC: 5 | RNVC: 2
AMG 217885A: RNCC: 5 | RNVC: 2

10 Sep 1993

4730-14-042-0347
Jeu Demi-Manchons

140420347
L20.311.BG.06: RNCC: 3 | RNVC: 2
L20-311GB06: RNCC: 5 | RNVC: 2
L20GB311-06: RNCC: 5 | RNVC: 2

6 Nov 1976

4730-14-540-6865
Tube To Boss Swivel Joint

145406865
38011242: RNCC: 3 | RNVC: 2
ND062343: RNCC: 5 | RNVC: 2
4848ZG8613180515: RNCC: 6 | RNVC: 9

20 Apr 2004

4730-14-504-0580
Tube Coupling

145040580
NNP4730878750127: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-426-6586
Tube Tee

144266586
60450606: RNCC: 3 | RNVC: 2
540606: RNCC: 5 | RNVC: 9

15 Sep 1988

4730-14-522-5467
Check Valve Adapter

145225467
417215: RNCC: 3 | RNVC: 2

6 Nov 2000

4730-14-548-8626
Tube Coupling Assembly

145488626
0298737740: RNCC: 3 | RNVC: 2

21 Feb 2006

4730-14-430-4275
Tube To Hose Straight Adapter

144304275
60190813: RNCC: 3 | RNVC: 9

21 Mar 1989

4730-14-500-8059
Tube To Boss Straight Adapter

145008059
E64603000002: RNCC: 3 | RNVC: 2
F300 0T 024 8259: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-213-4330
Tube Tee

142134330
55381: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-329-3388
Tube To Boss Straight Adapter

143293388
901MA091REP4: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-450-0495
Sediment Strainer Element

144500495
01000815A08200: RNCC: 3 | RNVC: 2
01000815A08200: RNCC: 3 | RNVC: 9

18 Sep 1991

4730-14-441-7574
Quick Disconnect Coupling Half

144417574
RBE06-1810/QR/OD: RNCC: 3 | RNVC: 2

17 Sep 1990

4730-14-204-8286
Fluid Pressure Line Multiple Connector

142048286
R691-02: RNCC: 3 | RNVC: 2
R69102: RNCC: 3 | RNVC: 2
R691-02: RNCC: 6 | RNVC: 9
R69102: RNCC: 6 | RNVC: 9

1 Jan 1963

4730-14-268-5094
Return Tube Bend

142685094
3D180-152-4MM: RNCC: 3 | RNVC: 2
A49182C152-4BEJ: RNCC: 4 | RNVC: 1
E29-044-152-4MM180: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-370-4664
Quick Disconnect Coupling Half

143704664
23MEPK324500006PL2-REP2: RNCC: 3 | RNVC: 2
CMT30E9047PL2-REP2: RNCC: 5 | RNVC: 2
CMT30L9047PL2REP2: RNCC: 5 | RNVC: 2

18 May 1981

4730-14-372-3909
Bulkhead Hose Connector

143723909
2033-4-4S: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-558-2640
Hose Clamp

145582640
5010571830: RNCC: 3 | RNVC: 2
20978324: RNCC: 5 | RNVC: 2

16 Sep 2008

4730-14-239-4974

4730-14-290-9533

4730-14-307-7200
Buse Fixe

143077200
H40785-1: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-506-0431
Fluid Pressure Line Multiple Connector

145060431
RA1M522004610: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-378-0328
Tube Tee

143780328
32543781: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-561-6045
Pipe To Tube Straight Adapter

145616045
10-12F42EDMLOS: RNCC: 3 | RNVC: 2
20 250 100 1740: RNCC: 5 | RNVC: 2

3 Aug 2009

4730-14-411-5450
Voyant Niveau

144115450
NO PRIMARY REF 14-411-5450: RNCC: 3 | RNVC: 2
FSA127-10: RNCC: 5 | RNVC: 9

20 Aug 1986

4730-14-564-7032
Quick Disconnect Coupling Assembly Set

145647032
261339834-00: RNCC: 3 | RNVC: 2

27 May 2010

4730-14-417-7811
Tube To Boss Straight Adapter

144177811
LW110-NC2226L: RNCC: 3 | RNVC: 2
8401228947NU: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-333-5299
Quick Disconnect Wye

143335299
31420400: RNCC: 3 | RNVC: 2
037563N: RNCC: 5 | RNVC: 2
89231610: RNCC: 5 | RNVC: 2
505330056: RNCC: 5 | RNVC: 2
24275320: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-461-9313
Drainage Pipe Coupling

144619313
T700A3415031100: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-395-3714
Solder Type Tube Fitting Plug

143953714
N0162F21A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-421-5233
Tube Coupling

144215233
MU57: RNCC: 3 | RNVC: 9

18 Jan 1988

4730-14-436-5645
Bulkhead Hose Connector

144365645
DA2C205517811U1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-397-9407
Tube Tee

143979407
17-28NU: RNCC: 3 | RNVC: 2
10A28NU: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-485-7709
Tube Tee

144857709
80466: RNCC: 3 | RNVC: 9

12 Feb 1997

4730-14-559-0912
Hose Connector Sleeve

145590912
1436220: RNCC: 3 | RNVC: 2

4 Dec 2008

4730-14-451-2166
Hose To Boss Straight Adapter

144512166
PM1A525062010: RNCC: 3 | RNVC: 2
PM1A525062010: RNCC: 5 | RNVC: 2

6 Nov 1991

4730-14-490-0698
Tube Fitting Socket Welded Ferrule

144900698
THP25EFA30: RNCC: 3 | RNVC: 2
91776915: RNCC: 5 | RNVC: 2

10 Sep 1997

4730-14-450-0862
Pipeline Flexible Spacer

144500862
DILNTHB340PN10DN200U1198F: RNCC: 3 | RNVC: 2

23 Sep 1991

4730-14-241-9020
Sediment Strainer Element

142419020
401728: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-486-3975
Raccord D'injecteur

144863975
24020006927: RNCC: 3 | RNVC: 2
417213-02: RNCC: 5 | RNVC: 2

17 Mar 1997

4730-14-528-9218
Hose Coupling Assembly

145289218
1711/11MS: RNCC: 3 | RNVC: 2

22 Feb 2002

4730-14-416-9080
Bulkhead Hose Connector

144169080
F530-06-06: RNCC: 3 | RNVC: 2

25 Jun 1987

4730-14-563-6043
Fluid Pressure Line Multiple Connector

145636043
R1A12ME03M-2012: RNCC: 3 | RNVC: 2

25 Feb 2010

4730-14-569-3354
Quick Disconnect Coupling Assembly

145693354
HS-22248-18: RNCC: 3 | RNVC: 2
23438-3-REP23: RNCC: 5 | RNVC: 2
23438-3-REP23: RNCC: 5 | RNVC: 2
48-103A-REP23: RNCC: 5 | RNVC: 2

6 Sep 2011

4730-14-531-9596

4730-14-522-5398

4730-14-488-8954
Bouchon Soupape

4730-14-501-7639

4730-14-362-0467

4730-14-365-9667

4730-14-324-4454
Equipee Boite Purge

143244454
121B77-108-00-07: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-250-8050
Tube To Boss Straight Adapter

142508050
13-10-12-17NU: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-423-4322
Pipe Flange

144234322
UA50088006PN150-11D1DN40: RNCC: 2 | RNVC: 2
4730HCPN150DN04011D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-218-3134
Fluid Pressure Line Multiple Connector

142183134
R13006: RNCC: 3 | RNVC: 2
99058264: RNCC: 5 | RNVC: 2
84423-60: RNCC: 5 | RNVC: 2
RA13006: RNCC: 5 | RNVC: 2
99058264: RNCC: 5 | RNVC: 2
911260-506: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-412-3437
Pipeline Flexible Spacer

144123437
4280-101-220-4CS12AX: RNCC: 3 | RNVC: 2
4280-101-4CS12AX: RNCC: 5 | RNVC: 2

8 Oct 1986

4730-14-402-3916
Fluid Passage Bolt

144023916
785-124: RNCC: 3 | RNVC: 2

3 Jul 1985

4730-14-484-1148
Tube To Boss Straight Adapter

144841148
4R8-16.1500R: RNCC: 3 | RNVC: 2
91100901: RNCC: 5 | RNVC: 2
5005430050: RNCC: 5 | RNVC: 2
1004484134: RNCC: 5 | RNVC: 2

24 Oct 1996

4730-14-448-5002
Flexible Tube Coupling Assembly

144485002
590852: RNCC: 3 | RNVC: 9

26 Jun 1991

4730-14-501-6896
Quick Disconnect Coupling Half

145016896
22721227: RNCC: 3 | RNVC: 2
91638629: RNCC: 3 | RNVC: 2

5 Nov 1997

4730-14-230-7105
Pipe Flange

142307105
GSM1947REP2MALE: RNCC: 3 | RNVC: 2
GSM1947DET2MALE: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-235-1269
Fluid Passage Bolt

142351269
40702: RNCC: 3 | RNVC: 9

1 Jan 1967

4730-14-456-6460
Tube Tee

144566460
LN326064F7REP4: RNCC: 3 | RNVC: 2
RAR1538: RNCC: 5 | RNVC: 2

16 Jul 1992

4730-14-503-1812
Bulkhead Hose Connector

145031812
RA1M543304130: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-325-8991
Pipe Flange

143258991
AS34TV105REP1: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-301-7271
Tube To Boss Straight Adapter

143017271
31094: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-367-7966
Quick Disconnect Coupling Half

143677966
S2268DG: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-421-7228
Tube To Boss Straight Adapter

144217228
0301050060: RNCC: 3 | RNVC: 2

27 Jan 1988

4730-14-213-8262
Raccord Entree Spec

142138262
223724: RNCC: 3 | RNVC: 2
223724: RNCC: 5 | RNVC: 2
223724: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-576-9234
Hose Mender

145769234
065016-249: RNCC: 3 | RNVC: 2
3040MT0200135: RNCC: 6 | RNVC: 9

23 Jul 2013

4730-14-314-1763

4730-14-407-3495
Quick Disconnect Coupling Half

144073495
IA 00909 90: RNCC: 3 | RNVC: 2
0-52040: RNCC: 5 | RNVC: 2

12 Feb 1986

4730-14-428-1984
Embase

144281984
580-274-000: RNCC: 3 | RNVC: 9

3 Dec 1988

4730-14-564-3116
Hose To Gas Fitting Straight Adapter

145643116
38367-00: RNCC: 3 | RNVC: 2
91903870: RNCC: 5 | RNVC: 2

22 Apr 2010

4730-14-331-7940
Tube Fitting Brazing Ferrule

143317940
579-710-008-0: RNCC: 3 | RNVC: 2
851-050-244-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-537-7533
Tube To Gas Fitting Straight Adapter

145377533
AMX30G3/4B-Y: RNCC: 3 | RNVC: 2
AMX30G3/4B-Y: RNCC: 5 | RNVC: 9

19 Nov 2003

4730-14-513-1303
Quick Disconnect Coupling Half

145131303
RBE032904-OD-IC-3: RNCC: 3 | RNVC: 2
RBE032904-IC-3-0D: RNCC: 5 | RNVC: 2
RBE032904IC30D: RNCC: 5 | RNVC: 2

5 Mar 1999

4730-14-504-1348
Sediment Strainer Element

145041348
MS010: RNCC: 3 | RNVC: 2

10 Feb 1998

4730-14-516-7435
Tube Tee

145167435
5206099: RNCC: 3 | RNVC: 2
Y00005954: RNCC: 3 | RNVC: 2
Y00005954: RNCC: 5 | RNVC: 9

13 Oct 1999

4730-14-538-5051
Tube Coupling Assembly

145385051
NGM0010059050100: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-238-9220
Tube To Boss Straight Adapter

142389220
0373850: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-426-7383
Tube Tee

144267383
4730HEEG088,9X16: RNCC: 2 | RNVC: 2

20 Sep 1988

4730-14-362-1480
Pipeline Flexible Spacer

143621480
KLEDIL25GZ: RNCC: 3 | RNVC: 9

20 Feb 1980

4730-14-455-8653
Hose To Boss Straight Adapter

144558653
576596: RNCC: 3 | RNVC: 2

11 Jun 1992

4730-14-409-3394
Fluid Pressure Line Multiple Connector

144093394
601227: RNCC: 3 | RNVC: 2

28 May 1986

4730-14-509-6541
Tube To Boss Straight Adapter

145096541
RP1A522004131: RNCC: 3 | RNVC: 2

28 Oct 1998

4730-14-212-1184
Pipe Expansion Joint

142121184
DLT111942: RNCC: 3 | RNVC: 2

5 Jul 1980

4730-14-524-8123
Pipe Flange

145248123
TC3007P005: RNCC: 3 | RNVC: 2

18 Apr 2001

4730-14-384-5083
Tube To Boss Straight Adapter

143845083
228335: RNCC: 3 | RNVC: 2
9520010717: RNCC: 5 | RNVC: 2
228335: RNCC: 5 | RNVC: 2
228335: RNCC: 5 | RNVC: 9

4 May 1983

4730-14-307-0427
Pipe Flange

143070427
5156144700: RNCC: 3 | RNVC: 2
561447: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-524-8766
Tube To Boss Straight Adapter

145248766
417832: RNCC: 3 | RNVC: 9

25 Apr 2001

4730-14-419-4339
Pipe Flange

144194339
B3051FS013F10A: RNCC: 3 | RNVC: 2

19 Oct 1987

4730-14-552-1139
Straight Tubing Connector

145521139
0000270050: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-231-6743
Sediment Strainer Element

142316743
B0044MF1BREP6AU9: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-453-0752
Pipe Flange

144530752
13503360Q: RNCC: 3 | RNVC: 2

4 Feb 1992

4730-14-449-7869
Thru-Hull Connector

144497869
000MA041E-FEUILLE9: RNCC: 3 | RNVC: 2

11 Sep 1991

4730-14-408-3879
Tube Fitting Clinch Sleeve

144083879
81242500: RNCC: 3 | RNVC: 2

19 Mar 1986

4730-14-552-1129
Tube Tee

145521129
0000360740: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-531-5382
Tube Coupling

145315382
RAC538060009: RNCC: 3 | RNVC: 2

27 Aug 2002

4730-14-267-5429
Pipe Flange

142675429
NO PRIMARY REF14-267-5429: RNCC: 3 | RNVC: 2
117H51: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-342-9915
Tube To Boss Straight Adapter

143429915
341A72-1038-20: RNCC: 3 | RNVC: 2

16 May 1977

4730-14-383-2089
Fluid Passage Bolt

143832089
A81808: RNCC: 3 | RNVC: 2
85-692-4695: RNCC: 6 | RNVC: 9

17 Mar 1983

4730-14-335-8032
Quick Disconnect Coupling Half

143358032
RBE03-6151: RNCC: 3 | RNVC: 2
RBE3-6151: RNCC: 5 | RNVC: 2

24 Jul 1976

4730-14-336-4792
Tube To Boss Straight Adapter

143364792
R733-01: RNCC: 3 | RNVC: 2

14 Aug 1976

4730-14-373-0578
Pipe Flange

143730578
B0326-010F4: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-575-9050
Tube To Boss Straight Adapter

145759050
GE15LREDCF: RNCC: 3 | RNVC: 2
428988: RNCC: 5 | RNVC: 2

15 May 2013

4730-14-567-3391
Pipe True Wye

145673391
F0003012900000: RNCC: 3 | RNVC: 2

7 Mar 2011

Load More Results