What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 140 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 140 of 185

4730-14-221-2155

4730-14-334-2542

4730-14-479-3002
Douille

144793002
0064630550: RNCC: 3 | RNVC: 2

9 Jan 1996

4730-14-575-7769
Flange To Tube Straight Adapter

145757769
M2811344700000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-430-0267
Bloc Raccordement

144300267
2277-55-602: RNCC: 3 | RNVC: 2

24 Feb 1989

4730-14-271-8268

4730-14-227-8329

4730-14-269-1970

4730-14-484-1150
Tube To Boss Straight Adapter

144841150
4R8-22.1500R: RNCC: 3 | RNVC: 2
1004484140: RNCC: 5 | RNVC: 2
91101001: RNCC: 5 | RNVC: 2
5005430068: RNCC: 5 | RNVC: 2

24 Oct 1996

4730-14-297-0540
Fluid Pressure Line Multiple Connector

142970540
453-01-08A: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-382-8372
Bulkhead Hose Connector

143828372
773-410-870REP1B: RNCC: 3 | RNVC: 2
773-410-870REP1B: RNCC: 5 | RNVC: 9

17 Feb 1983

4730-14-338-4539
Fluid Pressure Line Multiple Connector

143384539
330A75-7230-00: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-356-6628

4730-14-437-7624
Haute-Pression Kit

144377624
6301000: RNCC: 3 | RNVC: 2

19 Feb 1990

4730-14-413-8908
Fluid Pressure Line Multiple Connector

144138908
150240: RNCC: 3 | RNVC: 2
150240-3: RNCC: 5 | RNVC: 2
74997: RNCC: 5 | RNVC: 2

22 Jan 1987

4730-14-333-5168
Barillet A 6 Voies

143335168
GSM163-007BF24: RNCC: 3 | RNVC: 2
GSM163-07BF24: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-270-5837
Tube Coupling

142705837
NO PRIMARY REF14-270-5837: RNCC: 3 | RNVC: 2
417094: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-536-5144
Bulkhead Hose Connector

145365144
PZC-A966: RNCC: 3 | RNVC: 2
PZC-A966: RNCC: 5 | RNVC: 9
EN098889: RNCC: 6 | RNVC: 9

28 Aug 2003

4730-14-334-2523
Tube Tee

143342523
GSM163-017F21: RNCC: 3 | RNVC: 2
GSM163-17F21: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-222-6550
Tube Fitting Brazing Ferrule

142226550
GSM1297F1AF1BTABLEAU2D1-25I16: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-508-2472
Tube To Boss Straight Adapter

145082472
4PA12LS/18X150NU: RNCC: 3 | RNVC: 2
80413673: RNCC: 5 | RNVC: 2
5005130377: RNCC: 5 | RNVC: 2

2 Sep 1998

4730-14-209-1215

4730-14-424-8897
Branched Tubing Connector

144248897
851-750-301-0: RNCC: 3 | RNVC: 2

9 Jun 1988

4730-14-365-6839
Tube Tee

143656839
9458107458: RNCC: 3 | RNVC: 2
VDP4748: RNCC: 5 | RNVC: 2

8 Oct 1980

4730-14-552-6694
Tube Coupling

145526694
14400654K: RNCC: 3 | RNVC: 2

23 Jan 2007

4730-14-326-8602
Tube Coupling Assembly

143268602
3711PS20A: RNCC: 3 | RNVC: 2
3711PS20A: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-544-7079
Tube-Hose Adapter Body

145447079
330031208: RNCC: 3 | RNVC: 2

17 Feb 2005

4730-14-389-5655
Fluid Pressure Line Multiple Connector

143895655
39086171: RNCC: 3 | RNVC: 2
39086171: RNCC: 5 | RNVC: 9

20 Dec 1983

4730-14-446-4713
Fluid Pressure Line Multiple Connector

144464713
0294310050: RNCC: 3 | RNVC: 2
302-412-101-0: RNCC: 5 | RNVC: 2

20 Mar 1991

4730-14-325-3480
Tube To Boss Straight Adapter

143253480
12-73CHRACC0RD: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-389-7334
Diaphragme

143897334
66652-0103-007: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-310-3280
Raccord Deux Pieces

143103280
NO PRIMARY REF14-310-3280: RNCC: 3 | RNVC: 2
6350-35: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-278-8129

4730-14-334-3262

4730-14-271-5246
Obturateur Equipe

142715246
R1JCU12K: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-222-6543
Tube Fitting Brazing Ferrule

142226543
GSM1297F1AF1BTABLEAU2D1-20I15: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-328-5011
Bride Raccordement

143285011
GSM162-007F6: RNCC: 3 | RNVC: 2
000MA069REP1: RNCC: 5 | RNVC: 2
GSM162-07F6: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-246-0565

4730-14-246-1255

4730-14-461-2406
Tube To Boss Straight Adapter

144612406
610-256-002-0: RNCC: 3 | RNVC: 2

3 Mar 1993

4730-14-372-7005
Tube Coupling

143727005
121E59-040-00-0: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-305-0084
Tube To Boss Straight Adapter

143050084
9101208566: RNCC: 3 | RNVC: 2
CA1-20-27-150: RNCC: 5 | RNVC: 9
CA1-20-27X150: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-297-8942
Bloc De Derivation

142978942
411MA0162FA13: RNCC: 3 | RNVC: 2
411MA162FA13: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-320-2726

4730-14-351-0654

4730-14-374-7414
Self-Sealing Coupling Half

143747414
4-08-590: RNCC: 3 | RNVC: 2
4-08-590: RNCC: 5 | RNVC: 2

30 Jan 1982

4730-14-506-8889
Tube Tee

145068889
130G1 1 2-1 2: RNCC: 3 | RNVC: 2

27 May 1998

4730-14-534-8310
Tube-Hose Fitting Compression Sleeve

145348310
4-595055-2: RNCC: 3 | RNVC: 2
EN098787: RNCC: 6 | RNVC: 9

9 Apr 2003

4730-14-537-3932
Filler Cap Adapter Assembly

145373932
27568472-4: RNCC: 3 | RNVC: 2
8043639L00: RNCC: 5 | RNVC: 2

3 Nov 2003

4730-14-259-3721
Rondelle Filtrante

142593721
104911: RNCC: 3 | RNVC: 2
J05403-01-1102P014: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-359-6666
Tube Coupling

143596666
205856001: RNCC: 3 | RNVC: 2
PAA58-56-001: RNCC: 5 | RNVC: 2

15 Oct 1979

4730-14-412-3077
Hose Coupling Assembly

144123077
2756-02-40E6: RNCC: 3 | RNVC: 2

8 Oct 1986

4730-14-522-7747
Self-Sealing Coupling Assembly

145227747
N00440698: RNCC: 3 | RNVC: 2
SCB20.7105/IC/VR/KR/SP/N00440698: RNCC: 5 | RNVC: 2
91790269: RNCC: 5 | RNVC: 2

22 Nov 2000

4730-14-487-0535
Raccord Corps

144870535
E5137721: RNCC: 3 | RNVC: 2
E51377-21: RNCC: 5 | RNVC: 2
P51377-21E: RNCC: 5 | RNVC: 2

2 Apr 1997

4730-14-568-9658
Tube Elbow

145689658
CMS1815: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-333-3463

4730-14-367-0393

4730-14-575-7546
Hose Coupling

145757546
ADAPT12150X00: RNCC: 3 | RNVC: 2

29 Apr 2013

4730-14-576-7533
Quick Disconnect Coupling Half

145767533
582-0290: RNCC: 3 | RNVC: 2
RAC 1011-1/4F: RNCC: 3 | RNVC: 2
11845 REP16: RNCC: 3 | RNVC: 2
LM365700: RNCC: 3 | RNVC: 2

10 Jul 2013

4730-14-358-2797
Sediment Strainer Element

143582797
105602-01: RNCC: 3 | RNVC: 2
C105602-01: RNCC: 5 | RNVC: 2
105602-01: RNCC: 5 | RNVC: 9

13 Aug 1979

4730-14-390-4017
Tube To Boss Straight Adapter

143904017
J00986-01-2200P003: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-395-7115
Tube Tee

143957115
9N3-08: RNCC: 3 | RNVC: 2
9560136920: RNCC: 5 | RNVC: 2

30 Oct 1984

4730-14-464-6212
Pipe Expansion Joint

144646212
104-1532: RNCC: 3 | RNVC: 2
104-1532: RNCC: 5 | RNVC: 9

16 Aug 1993

4730-14-250-8275
Tube To Boss Straight Adapter

142508275
328277: RNCC: 3 | RNVC: 2
504291: RNCC: 5 | RNVC: 2
DBA328277: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-375-2209

4730-14-575-4806
Grooved Clamp Connecting Coupling Half

145754806
509055-12-13: RNCC: 3 | RNVC: 2

9 Apr 2013

4730-14-204-3344
Raccord Special

142043344
13S4-34: RNCC: 3 | RNVC: 2
13S4-34: RNCC: 5 | RNVC: 2
13S4-34A: RNCC: 5 | RNVC: 2
13S4-34B: RNCC: 5 | RNVC: 2
13S4-34C: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-281-6562
Raccord Coude Tourn

142816562
100001677: RNCC: 3 | RNVC: 2
GIU1276: RNCC: 5 | RNVC: 2
100-001-677: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-430-4528
Tube Union

144304528
341-50X60: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-505-9812
Lubrication Fitting

145059812
3CM2102: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-380-9235
Tube To Boss Straight Adapter

143809235
201MA3000REP5: RNCC: 3 | RNVC: 2

14 Dec 1982

4730-14-255-1378

4730-14-373-5641
Tube To Boss Straight Adapter

143735641
908115: RNCC: 3 | RNVC: 2
908115: RNCC: 5 | RNVC: 2
908115: RNCC: 5 | RNVC: 2
908115: RNCC: 5 | RNVC: 9

13 Nov 1981

4730-14-202-5307

4730-14-518-5089
Return Tube Bend

145185089
HCOXX000040: RNCC: 3 | RNVC: 9

9 Feb 2000

4730-14-424-6609
Quick Disconnect Coupling Half

144246609
5000261513: RNCC: 3 | RNVC: 2
89409923: RNCC: 5 | RNVC: 2

2 Jun 1988

4730-14-242-7937

4730-14-311-2577

4730-14-561-6052
Pipe To Tube Straight Adapter

145616052
8-4F42EDMLOS: RNCC: 3 | RNVC: 2
20 250 100 1210: RNCC: 5 | RNVC: 2

4 Aug 2009

4730-14-457-1292
Tube Union

144571292
METALGRIP 108.0 EPDM 16 BAR INOX: RNCC: 3 | RNVC: 2
1801081: RNCC: 5 | RNVC: 2

11 Aug 1992

4730-14-324-4554
Fluid Pressure Line Multiple Connector

143244554
244A: RNCC: 3 | RNVC: 2
1623-6-204B: RNCC: 3 | RNVC: 9
1623-6-204B: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-368-2401
Tube To Boss Straight Adapter

143682401
F3BPLB14X2-1-2: RNCC: 3 | RNVC: 2
0003137040: RNCC: 5 | RNVC: 2
0003137040: RNCC: 5 | RNVC: 9
3137040: RNCC: 5 | RNVC: 9

20 Feb 1981

4730-14-339-5279
Tube To Boss Straight Adapter

143395279
A6042-1: RNCC: 3 | RNVC: 2
A6042-1: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-456-7291
Swivel Flange To Tube Elbow

144567291
GA58869-7: RNCC: 3 | RNVC: 2
GA58869-7: RNCC: 5 | RNVC: 2

24 Jul 1992

4730-14-321-4476
Tube To Boss Straight Adapter

143214476
ECHC289J9-12REP1: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-219-7829
Bride Fixation Racc

142197829
2-146011-1: RNCC: 3 | RNVC: 2
146011A: RNCC: 5 | RNVC: 9
2-146011-1: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-262-1546
Pipe Flange

142621546
7062DJ1F1M41-5-5XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-346-7047
Plaque De Reduction

143467047
6784-1DH28-6A: RNCC: 2 | RNVC: 2
MEC11219: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-393-4637
Raccord Adaptateur

143934637
E6435-3280-113PL34: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-312-7862
Contre-Bride

143127862
300133-1-2N0NPERCE: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-273-5178

4730-14-032-1550
Contre Bride

140321550
CMT30E9030AF3DE108REP4: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-558-8172
Tube Elbow

145588172
50212094: RNCC: 3 | RNVC: 2
706A34424004: RNCC: 5 | RNVC: 2
50212094: RNCC: 5 | RNVC: 9

12 Nov 2008

4730-14-359-5848
Tube To Boss Straight Adapter

143595848
9DM12-16X150NU: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-562-5320
Pipeline Flexible Spacer

145625320
0429045: RNCC: 3 | RNVC: 2
A1/ 125/ KR320-WG/ P: RNCC: 3 | RNVC: 2

3 Nov 2009

4730-14-294-2510
Bulkhead Hose Connector

142942510
121E52-203-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-494-0875
Union

144940875
202369900330: RNCC: 3 | RNVC: 2
F300 0T 015 4226: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-371-9422
Exhaust-Intake Pneumatic Muffler

143719422
2753820440: RNCC: 3 | RNVC: 2
2753820440: RNCC: 5 | RNVC: 9

5 Aug 1981

4730-14-402-1903
Tube Tee

144021903
S6XS6: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-386-7695
Sediment Strainer Element

143867695
B33186: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-359-6587
Tube-Hose Fitting Compression Sleeve

143596587
105-14P: RNCC: 3 | RNVC: 2
5005030005: RNCC: 5 | RNVC: 2

15 Oct 1979

4730-14-439-9632
Tube Coupling

144399632
39036932: RNCC: 3 | RNVC: 2

29 Jun 1990

4730-14-355-5608

4730-14-355-8891

4730-14-239-6328
Raccord Equipe

142396328
NO PRIMARY REF14-239-6328: RNCC: 3 | RNVC: 2
831-63-947: RNCC: 5 | RNVC: 9
831-63-947: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-233-1525
Bride Pour Tube

142331525
1711-03: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-032-1572
Pipe Flange

140321572
CMT30E9030AF4DE30REP2: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-578-4827
Hose Tee

145784827
JPRD 10 8: RNCC: 3 | RNVC: 2

3 Dec 2013

4730-14-335-1233
Tube Tee

143351233
M25-32-150-50-50: RNCC: 3 | RNVC: 2

3 Jun 1976

4730-14-395-8805
Tube To Boss Straight Adapter

143958805
4730ACF9DE13-72: RNCC: 2 | RNVC: 2
GSM164-038F7: RNCC: 3 | RNVC: 2
MAT164-0310F2: RNCC: 5 | RNVC: 2

30 Oct 1984

4730-14-459-6806
Fluid Pressure Line Multiple Connector

144596806
A10112-04-0000P006: RNCC: 3 | RNVC: 2

10 Dec 1992

4730-14-345-8949
Fluid Pressure Line Multiple Connector

143458949
606-16-90ARSK01: RNCC: 3 | RNVC: 2

5 Nov 1977

4730-14-458-0092
Fluid Passage Bolt

144580092
9007-890B: RNCC: 3 | RNVC: 9
9007-890B: RNCC: 5 | RNVC: 2
ROT9007-890B: RNCC: 5 | RNVC: 9

2 Oct 1992

4730-14-423-4364
Pipe Flange

144234364
UA50088006PN250-11C1DN80: RNCC: 2 | RNVC: 2
4730HCPN250DN08011C1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-307-7095
Tube To Boss Straight Adapter

143077095
GSM164-039F24: RNCC: 3 | RNVC: 2
411MA470F12REP11: RNCC: 5 | RNVC: 2
GSM164-005F25: RNCC: 5 | RNVC: 2
GSM164-05F25: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-410-8867
Quick Disconnect Coupling Half

144108867
RBE03-7100/IC/JE: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-410-9838
Tube To Boss Straight Adapter

144109838
4730AJ4.4DN25NU: RNCC: 2 | RNVC: 2
MEC10820: RNCC: 3 | RNVC: 2
Q15GE25S3/4BSPK NU: RNCC: 3 | RNVC: 2
8405252766NU: RNCC: 5 | RNVC: 2

23 Jul 1986

4730-14-296-7104

4730-14-503-1761
Bulkhead Hose Connector

145031761
RA1M534304140: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-260-9206

4730-14-218-3092

4730-14-352-9638
Sediment Strainer Element

143529638
12425130B: RNCC: 3 | RNVC: 2
42513: RNCC: 5 | RNVC: 2

14 Nov 1978

4730-14-408-3671
Hose To Boss Straight Adapter

144083671
TTA04INOX316LMI10X100: RNCC: 3 | RNVC: 9
5383: RNCC: 5 | RNVC: 9

19 Mar 1986

4730-14-423-9261
Hose To Boss Straight Adapter

144239261
8179107199: RNCC: 3 | RNVC: 2

5 May 1988

4730-14-434-6578
Pipe Flange

144346578
1056-DN 125: RNCC: 3 | RNVC: 9

27 Sep 1989

4730-14-546-5655
Tube Tee

145465655
10RA8X10X8NUCB: RNCC: 3 | RNVC: 2
82405310: RNCC: 5 | RNVC: 2

20 Jul 2005

4730-14-228-0660
Tube To Boss Swivel Joint

142280660
9774064032: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-231-2006
Tube Tee

142312006
518062: RNCC: 3 | RNVC: 2
12176: RNCC: 5 | RNVC: 2
062054720: RNCC: 5 | RNVC: 9
54720: RNCC: 5 | RNVC: 9
700093: RNCC: 5 | RNVC: 9
DBA518062: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-417-7815
Tube To Boss Straight Adapter

144177815
LW150-NC1420S: RNCC: 3 | RNVC: 2
8454148047NU: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-540-7033
Anchor And Reinforcement Pipe Clamp

145407033
38011162: RNCC: 3 | RNVC: 2
ND069478: RNCC: 5 | RNVC: 2
4848ZG8613180962: RNCC: 6 | RNVC: 9

20 Apr 2004

4730-14-408-8658
Tube To Boss Straight Adapter

144088658
89050613: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-220-6107
Tube Tee

142206107
R8SX10X8: RNCC: 3 | RNVC: 2
R8SX10X8S0: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-347-1132
Pipe Flange

143471132
DLT048561: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-268-6659
Demi-Raccord A Demo

142686659
1317-6-73: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-251-4686
Quick Disconnect Coupling Half

142514686
SC07512AU2056: RNCC: 3 | RNVC: 2
S0F75-0 3-4: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-256-9316
Swivel Retaining Pipe Flange

142569316
RUHB113-4: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-333-5325
Selecteur De Circui

143335325
G1-4: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-211-4447
Fluid Pressure Line Multiple Connector

142114447
45123: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-428-4684
Tube Tee

144284684
R0810S08: RNCC: 3 | RNVC: 2
R8X10SX8: RNCC: 5 | RNVC: 2

8 Dec 1988

4730-14-374-7772
Bulkhead Hose Connector

143747772
0000363930: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-429-5389
Tube Fitting Brazing Ferrule

144295389
81421759: RNCC: 3 | RNVC: 2

30 Jan 1989

4730-14-484-3099
Grooved Clamp Connecting Coupling Half

144843099
2435A75-869D: RNCC: 3 | RNVC: 2
NA1071C075D0869: RNCC: 5 | RNVC: 2

7 Nov 1996

4730-14-430-0703
Pipe Flange

144300703
213530251: RNCC: 3 | RNVC: 2

1 Mar 1989

4730-14-405-8970
Fluid Pressure Line Multiple Connector

144058970
WH010LMA2L: RNCC: 3 | RNVC: 2
WH010LMA2L: RNCC: 5 | RNVC: 2
428909: RNCC: 5 | RNVC: 2
WH010LMA2L: RNCC: 5 | RNVC: 9

12 Dec 1985

4730-14-430-6192
Tube Tee

144306192
PM1A521140300: RNCC: 3 | RNVC: 2
PM1A521140300: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-321-6704
Fluid Passage Bolt

143216704
0000290700: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-435-1786
Tube Coupling

144351786
93423: RNCC: 3 | RNVC: 2

24 Oct 1989

4730-14-528-4150
Quick Disconnect Coupling Half

145284150
AA33: RNCC: 3 | RNVC: 2

28 Jan 2002

4730-14-434-3055
Hydraulic Manifold Assembly

144343055
553435: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-215-8580
Raccord Orientable

142158580
387730: RNCC: 3 | RNVC: 2
AML1206: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-031-3863
Support De Raccord

140313863
A11A221247030: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-295-3073
Raccord Distributio

142953073
177427: RNCC: 3 | RNVC: 2
MAF0001001669: RNCC: 6 | RNVC: 9

1 Jan 1973

4730-14-366-5940

4730-14-297-0454

4730-14-335-9358
Tube Tee

143359358
R6LX6X6L: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-477-8886
Tube Coupling

144778886
T700A7920013100: RNCC: 3 | RNVC: 2

27 Sep 1995

4730-14-407-4651
Pipe Flange

144074651
24101084600: RNCC: 3 | RNVC: 2
241010846: RNCC: 5 | RNVC: 9

19 Feb 1986

4730-14-230-5976
Bulkhead Hose Connector

142305976
3761S16A: RNCC: 3 | RNVC: 2
3761S16A: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-417-6842
Tube To Boss Straight Adapter

144176842
1204-30-33X150: RNCC: 3 | RNVC: 2

22 Jul 1987

4730-14-328-8961
Tube To Boss Straight Adapter

143288961
U1114F17-10ET1134F11-12CUAL: RNCC: 2 | RNVC: 2

2 Jul 1975

4730-14-214-1949
Raccord Special

142141949
2501-74-32650: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-320-2201
Raccord Adaptateur

143202201
GSM035-001F7: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-575-0922
Tube Coupling Inverted Nut

145750922
TM4112P008: RNCC: 3 | RNVC: 2

12 Mar 2013

4730-14-560-6122
Pipe Elbow Assembly

145606122
10452160: RNCC: 3 | RNVC: 2

5 May 2009

4730-14-570-6239
Quick Disconnect Coupling Assembly

145706239
003249: RNCC: 3 | RNVC: 2

11 Jan 2012

4730-14-367-0302

4730-14-302-6778

4730-14-563-6002
Tube Nipple

145636002
05C246: RNCC: 3 | RNVC: 2

24 Feb 2010

4730-14-254-5999

4730-14-302-3689
Bloc De Raccordemen

143023689
177030: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-498-9205
Tube To Boss Straight Adapter

144989205
XGE22-LRA3C: RNCC: 3 | RNVC: 2
XGE22LRA3C: RNCC: 3 | RNVC: 2
F300 0T 012 1607: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-272-9298
Tube Coupling Inverted Nut

142729298
Q151R5512: RNCC: 3 | RNVC: 2
RQ151R5512: RNCC: 5 | RNVC: 2
R5512: RNCC: 5 | RNVC: 2
Q15-1R5512: RNCC: 5 | RNVC: 2
R5512: RNCC: 5 | RNVC: 9
RQ15-1R5512: RNCC: 5 | RNVC: 9
91913509: RNCC: 5 | RNVC: 9
F300 0T 004 4258: RNCC: 6 | RNVC: 9

1 Jan 1971

4730-14-500-8060
Tube To Boss Straight Adapter

145008060
XGE18-LMA3C: RNCC: 3 | RNVC: 2
XGE18LMA3C: RNCC: 3 | RNVC: 2
F300 0T 024 8260: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-488-4049
Tube To Boss Straight Adapter

144884049
K3037550: RNCC: 3 | RNVC: 2
P30375-50K: RNCC: 5 | RNVC: 2
K30375-50: RNCC: 5 | RNVC: 2

7 May 1997

4730-14-455-5933
Quick Disconnect Coupling Assembly

144555933
WA.1166M: RNCC: 3 | RNVC: 2
0079804: RNCC: 5 | RNVC: 2
WA-1166M: RNCC: 5 | RNVC: 2
91714836: RNCC: 5 | RNVC: 2
WA1166M: RNCC: 5 | RNVC: 2
0525850: RNCC: 5 | RNVC: 2
3148510798042: RNCC: 5 | RNVC: 2

28 May 1992

4730-14-506-8713
Exhaust-Intake Pneumatic Muffler

145068713
06750013: RNCC: 3 | RNVC: 2
0675-00-13: RNCC: 3 | RNVC: 2

27 May 1998

4730-14-263-2838
Compensateur De Dil

142632838
D8109-29080A: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-308-4704
Tube Fitting Brazing Ferrule

143084704
GSM163-011REP20-1-30F7: RNCC: 3 | RNVC: 2
GSM163-11AREP20-1-30: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-450-5690
Sous Ensemble Bride

144505690
GSM166-005F17: RNCC: 3 | RNVC: 2

9 Oct 1991

4730-14-237-7076

4730-14-569-1330
Vaporizing Nozzle

145691330
32544: RNCC: 3 | RNVC: 2
655-1002-REP13: RNCC: 5 | RNVC: 2

11 Aug 2011

4730-14-477-8997
Tube Union

144778997
NO PRIMARY REF14-477-8997: RNCC: 3 | RNVC: 2
1800603: RNCC: 5 | RNVC: 2
METAL-GRIP 60.3NBR INOX INOX: RNCC: 5 | RNVC: 2

29 Sep 1995

4730-14-345-1333
Tube To Boss Straight Adapter

143451333
24S06006: RNCC: 3 | RNVC: 2
24S06006: RNCC: 5 | RNVC: 2

5 Oct 1977

4730-14-457-2851
Fluid Pressure Line Multiple Connector

144572851
1704318: RNCC: 3 | RNVC: 2

20 Aug 1992

4730-14-465-3927
Manchette Double

144653927
LN326056-21-DN25: RNCC: 3 | RNVC: 2

28 Sep 1993

4730-14-295-7783
Quick Disconnect Coupling Half

142957783
E29572A32BZ: RNCC: 2 | RNVC: 2
10-00116: RNCC: 3 | RNVC: 2
4090-30-35: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-344-2388
Tube Coupling Inverted Nut

143442388
7123-775A: RNCC: 3 | RNVC: 9
ROT7123-775A: RNCC: 5 | RNVC: 9

10 Aug 1977

4730-14-342-1678
Tube To Boss Straight Adapter

143421678
3210-94-31-110: RNCC: 3 | RNVC: 2
85-688-7351: RNCC: 6 | RNVC: 9

14 Apr 1977

4730-14-492-1082
Tube To Boss Straight Adapter

144921082
NO PRIMARY REF14-492-1082: RNCC: 3 | RNVC: 2
030266: RNCC: 5 | RNVC: 9
F300 0T 006 9534: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-300-8647
Threaded Tube Fitting Plug

143008647
511-410-129PL13REPRC10: RNCC: 3 | RNVC: 2
511-410-129EREPRC10: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-301-8078
Quick Disconnect Coupling Half

143018078
NO PRIMARY REF14-301-8078: RNCC: 3 | RNVC: 2
4090-4097-80-90: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-316-8560
Tube To Boss Straight Adapter

143168560
721-0009: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-276-9914
Tube Tee

142769914
T2-12-631X6212: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-246-3862

4730-14-467-7621
Flange To Tube Straight Adapter

144677621
0322712980: RNCC: 3 | RNVC: 2

27 Jan 1994

4730-14-491-1306
Fluid Passage Bolt

144911306
1119230: RNCC: 3 | RNVC: 2
F300 0T 001 5233: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-504-2059
Tube-Pipe Fitting Kit

145042059
25407M93: RNCC: 3 | RNVC: 2

11 Feb 1998

4730-14-338-0794

4730-14-383-1374

4730-14-408-6441
Accouplemen Raccord

144086441
160G732010-28: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-412-3041
Siege Pilot Raccord

144123041
408689-2: RNCC: 3 | RNVC: 2

8 Oct 1986

4730-14-346-6789
Boite A Zinc Corps

143466789
AS34TQ22C: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-563-2980
Fluid Flow Restrictor

145632980
D61720-1: RNCC: 3 | RNVC: 9
D68345: RNCC: 5 | RNVC: 2

22 Jan 2010

4730-14-229-8301

4730-14-252-1727

4730-14-226-0810

4730-14-558-6194
Tube Tee

145586194
WAL037896: RNCC: 3 | RNVC: 2

17 Oct 2008

4730-14-545-7247
Tube Coupling

145457247
1784130000: RNCC: 3 | RNVC: 2
91830761: RNCC: 5 | RNVC: 2

2 May 2005

4730-14-207-9037

4730-14-347-7569
Partie Mobile

143477569
GSM425-024F31: RNCC: 3 | RNVC: 2
GSM425-24F31: RNCC: 5 | RNVC: 2
A0009-024F14: RNCC: 5 | RNVC: 2

1 Mar 1978

4730-14-321-9666
Pipe Flange

143219666
MAT147-0043F14: RNCC: 3 | RNVC: 2
GSM147-004F18: RNCC: 3 | RNVC: 9
MAT147-0044: RNCC: 4 | RNVC: 1
GSM147-04F18: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-313-4907

4730-14-214-4973

4730-14-227-3447

4730-14-562-3465
Tube To Boss Swivel Joint

145623465
2115-22-41.00: RNCC: 3 | RNVC: 2

15 Oct 2009

4730-14-436-0975
Raccord Adaptation

144360975
790-304: RNCC: 3 | RNVC: 2

5 Dec 1989

4730-14-455-6821
Purgeur Obturateur

144556821
MAT523-0057F7: RNCC: 3 | RNVC: 2

10 Jun 1992

4730-14-314-5670
Jeu Demi-Manchons

143145670
L32.315.06: RNCC: 3 | RNVC: 2
L32-315-06: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-506-4107
Tube Union

145064107
2818027062: RNCC: 3 | RNVC: 2
UFA8X8.13 DTCW12: RNCC: 5 | RNVC: 2

24 Apr 1998

4730-14-334-2678
Bloc Darret

143342678
A0174-311: RNCC: 3 | RNVC: 2
J00679-15-0000P026: RNCC: 3 | RNVC: 2

23 Apr 1976

4730-14-310-3211
Barillet Derivation

143103211
NO PRIMARY REF14-310-3211: RNCC: 3 | RNVC: 2
325253REP9: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-361-0164
Bloc De Raccordemen

143610164
B0234-001F5: RNCC: 3 | RNVC: 2

19 Dec 1979

4730-14-391-5015
Fluid Passage Bolt

143915015
426103625: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-395-3702
Tube To Boss Straight Adapter

143953702
N0117F24B: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-389-9954
Fluid Passage Bolt

143899954
0000157216: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-458-0881
Tube Union

144580881
G12S: RNCC: 3 | RNVC: 2

8 Oct 1992

4730-14-499-1132
Tube To Boss Straight Adapter

144991132
4DL12-22X150B: RNCC: 3 | RNVC: 9
A07051739: RNCC: 5 | RNVC: 2
A07051739: RNCC: 5 | RNVC: 9
F300 0T 018 3138: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-364-5887
Quick Disconnect Coupling Assembly

143645887
NO PRIMARY REF14-364-5887: RNCC: 3 | RNVC: 2
5000500555: RNCC: 5 | RNVC: 2
59-13-1055: RNCC: 5 | RNVC: 9
5000500555: RNCC: 5 | RNVC: 9

2 Sep 1980

4730-14-324-0310
Fluid Passage Bolt

143240310
901-62: RNCC: 3 | RNVC: 2
00885: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-561-7915
Tube To Boss Straight Adapter

145617915
34-811167-60: RNCC: 3 | RNVC: 2

7 Sep 2009

4730-14-390-5776
Tube To Boss Straight Adapter

143905776
01010662: RNCC: 3 | RNVC: 2
0101-06-62: RNCC: 5 | RNVC: 2

26 Jan 1984

4730-14-263-9195
Fluid Passage Bolt

142639195
44312DE160A: RNCC: 2 | RNVC: 2
L44312-160DEA: RNCC: 5 | RNVC: 2
L44312-16DEA: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-398-9278
Fluid Pressure Line Multiple Connector

143989278
501627335: RNCC: 3 | RNVC: 2
18262ACL: RNCC: 5 | RNVC: 9
355-239-18262: RNCC: 5 | RNVC: 9
X31715392: RNCC: 5 | RNVC: 9

6 Mar 1985

4730-14-433-0694
Tube Tee

144330694
F0532S4710X0002-9049: RNCC: 3 | RNVC: 2
LW306-DW5305N: RNCC: 3 | RNVC: 2
S4710X0002-9049: RNCC: 5 | RNVC: 2
092 90 30 061 11: RNCC: 5 | RNVC: 2

7 Jul 1989

4730-14-404-2904
Quick Disconnect Coupling Half

144042904
CROQ2-85BECNMACHN: RNCC: 3 | RNVC: 2

18 Sep 1985

4730-14-219-3247
Raccord Special

142193247
NO PRIMARY REF14-219-3247: RNCC: 3 | RNVC: 2
1091: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-398-5938
Tube Fitting Brazing Ferrule

143985938
4730AMF3PN250DE25: RNCC: 2 | RNVC: 2
GSM164-057F4Z0NED: RNCC: 3 | RNVC: 2
MAT164-0354F4ZONED: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-281-3132
Ecrou-Raccord Equip

142813132
156325: RNCC: 3 | RNVC: 2
156325A: RNCC: 5 | RNVC: 2
650-485-051-0: RNCC: 5 | RNVC: 2
85-688-9307: RNCC: 6 | RNVC: 9

1 Jan 1971

4730-14-415-2603
Pipe Flange

144152603
1713253021: RNCC: 3 | RNVC: 2
1713253021: RNCC: 5 | RNVC: 9
2280159: RNCC: 5 | RNVC: 9

22 Apr 1987

4730-14-512-1432
Pipe To Hose Straight Adapter

145121432
AMC15: RNCC: 3 | RNVC: 2
91629879: RNCC: 5 | RNVC: 2
91629879: RNCC: 5 | RNVC: 2

4 Feb 1999

4730-14-575-0187
Tube To Boss Straight Adapter

145750187
82685552000: RNCC: 3 | RNVC: 2

7 Mar 2013

4730-14-225-0117

4730-14-402-0493
Bv Prise De Jauge

144020493
234789: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-563-3836
Hose Clamp

145633836
3630.163: RNCC: 3 | RNVC: 2
7421555165: RNCC: 5 | RNVC: 2

3 Feb 2010

4730-14-463-3322
Raccord

144633322
0000477454: RNCC: 3 | RNVC: 2
477454: RNCC: 5 | RNVC: 2

9 Jun 1993

4730-14-276-7598

4730-14-576-3117
Quick Disconnect Coupling Half

145763117
4065: RNCC: 3 | RNVC: 2

12 Jun 2013

4730-14-488-8926
Hydraulic Swivel Joint

144888926
0072701080: RNCC: 3 | RNVC: 2
0072701080: RNCC: 3 | RNVC: 2
7270.108 9: RNCC: 5 | RNVC: 2
F300 0T 023 6115: RNCC: 6 | RNVC: 9

11 Jun 1997

4730-14-322-9655
Sediment Strainer Element

143229655
121E93-145-45-2: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-443-4756
Fluid Passage Bolt

144434756
2-107719-7: RNCC: 3 | RNVC: 2
2-107719-7: RNCC: 5 | RNVC: 9

26 Nov 1990

4730-14-508-8041
Return Tube Bend

145088041
3.50515.0: RNCC: 3 | RNVC: 2

30 Sep 1998

4730-14-350-9293
Tube Union

143509293
341GCU14 1-2: RNCC: 3 | RNVC: 2
341GC14 1-2: RNCC: 3 | RNVC: 9

12 Jul 1978

4730-14-426-7805
Tube Tee

144267805
4730HEING088,9X8-48,3X3,6: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-370-7434
Sediment Strainer Element

143707434
676-45215-00: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-371-2798
Pipe Flange

143712798
NO PRIMARY REF14-371-2798: RNCC: 3 | RNVC: 2
1511520: RNCC: 5 | RNVC: 2
1511520: RNCC: 5 | RNVC: 9

5 Aug 1981

4730-14-435-8239
Tube Coupling

144358239
332A32-2356-20: RNCC: 3 | RNVC: 2

22 Nov 1989

4730-14-395-8890
Swivel Retaining Pipe Flange

143958890
CBP-R0R-SAD-DN40ALESAGE52PN16: RNCC: 3 | RNVC: 2

30 Oct 1984

4730-14-366-6030

4730-14-217-2858

4730-14-281-0490

4730-14-276-6804
Raccord Complet

142766804
87080: RNCC: 3 | RNVC: 2
C12: RNCC: 5 | RNVC: 2
9567150080: RNCC: 5 | RNVC: 2
87080: RNCC: 5 | RNVC: 9
C12: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-225-0597

4730-14-367-5291

4730-14-567-3691
Pipe Outlet

145673691
155-01-101: RNCC: 3 | RNVC: 2

9 Mar 2011

4730-14-549-6883
Quick Disconnect Coupling Half

145496883
PIA 06.6810/LD: RNCC: 3 | RNVC: 2

26 Apr 2006

4730-14-375-6852
Bride De Raccordeme

143756852
GSM162-007F27: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-484-2697
Anchor And Reinforcement Pipe Clamp

144842697
3130S73-89-445: RNCC: 3 | RNVC: 2
31307389445: RNCC: 5 | RNVC: 2

31 Oct 1996

4730-14-525-0773
Quick Disconnect Coupling Half

145250773
RBE06-6102-1-5: RNCC: 3 | RNVC: 2

18 May 2001

4730-14-495-6620
Tube To Boss Straight Adapter

144956620
F48375-26: RNCC: 3 | RNVC: 2
F300 0T 019 5942: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-397-7022
Fluid Passage Bolt

143977022
GSM164-044F14: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-333-5103
Bride Dequerre

143335103
GSM162-006F21: RNCC: 3 | RNVC: 2
GSM162-06F21: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-360-4710
Tube Fitting Clinch Sleeve

143604710
Q3-405-38: RNCC: 3 | RNVC: 2

23 Nov 1979

4730-14-435-7051
Quick Disconnect Coupling Half

144357051
SSH6-63W: RNCC: 3 | RNVC: 2
SSH6-63W: RNCC: 3 | RNVC: 9

21 Nov 1989

4730-14-031-1508
Tube To Boss Straight Adapter

140311508
9141403851: RNCC: 3 | RNVC: 2
9441403858: RNCC: 5 | RNVC: 2
VDP4664: RNCC: 5 | RNVC: 2
41P40-45-150-51: RNCC: 5 | RNVC: 9

14 Jun 1980

4730-14-504-0372
Self-Sealing Coupling Half

145040372
704A34-421-034: RNCC: 1 | RNVC: 2
9949446: RNCC: 3 | RNVC: 2
994-9446A: RNCC: 5 | RNVC: 2

4 Feb 1998

4730-14-575-9366
Tube Tee

145759366
NO PRIMARY REF 14-575-9366: RNCC: 3 | RNVC: 2
002R008C: RNCC: 5 | RNVC: 2

16 May 2013

4730-14-207-2652
Raccord Droit Speci

142072652
3160S69-10-009: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-355-5591

4730-14-328-5024

4730-14-240-7356
Vis Raccord Tube

142407356
512P411: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-321-5842
Pipe Flange

143215842
U1092EB30: RNCC: 2 | RNVC: 2
MEC10407: RNCC: 3 | RNVC: 2
4730BU-30: RNCC: 5 | RNVC: 2
7067E30: RNCC: 5 | RNVC: 9
7067E30C337CL2: RNCC: 5 | RNVC: 9
7067E30GAMMM11CU-AL9NI3FE2: RNCC: 5 | RNVC: 9
7067E30GAMMM12CU-AL9NI3FE2: RNCC: 5 | RNVC: 9
7068E30: RNCC: 5 | RNVC: 9
7068E30GAMMM11CU-AL9NI3FE2: RNCC: 5 | RNVC: 9
7068E30GAMMM12CU-AL9NI3FE2: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-566-0811
Quick Disconnect Coupling Half

145660811
RBE06.1151/IC/TF/VD/OD/JE: RNCC: 3 | RNVC: 2

18 Oct 2010

4730-14-337-4646
Fluid Passage Bolt

143374646
SQ2-00-09-26: RNCC: 3 | RNVC: 2

7 Oct 1976

4730-14-310-4254
Tube Repair Plug

143104254
K1712DREP6TAMC16: RNCC: 3 | RNVC: 2
K79-12REP6TAMP0N: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-565-2423
Tube Nipple

145652423
5005030972: RNCC: 1 | RNVC: 2
203 1 00112 C: RNCC: 3 | RNVC: 2
25312268: RNCC: 5 | RNVC: 2

29 Jul 2010

4730-14-489-0794
Tuyere

144890794
10000D30493-3: RNCC: 3 | RNVC: 2

24 Jun 1997

4730-14-344-9349
Tube Coupling

143449349
NO PRIMARY REF14-344-9349: RNCC: 3 | RNVC: 2
020818: RNCC: 5 | RNVC: 9

9 Sep 1977

4730-14-377-0819
Fluid Passage Bolt

143770819
330A58-6202-20: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-449-5397
Tube Union

144495397
UNION MALE R1 2353L33,7: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-568-6223
Fluid Flow Restrictor

145686223
23REDN/LN320/038F6DN200NON PERCE: RNCC: 2 | RNVC: 2
STF 33-03-02/508B DN200: RNCC: 2 | RNVC: 2

22 Jun 2011

4730-14-253-1960
Faisceau De Tube

142531960
B110DG11MCN2: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-272-6399
Tube Tee

142726399
160-63454: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-500-5542
Tube To Boss Straight Adapter

145005542
E63705000004: RNCC: 3 | RNVC: 2
F300 0T 024 5725: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-301-8184

4730-14-407-6513
Amorcage De Pompe

144076513
1455923: RNCC: 3 | RNVC: 2

27 Feb 1986

4730-14-403-7421
Coude Raccord

144037421
51MS009: RNCC: 3 | RNVC: 2

21 Aug 1985

4730-14-321-6717
Tube-Raccord

143216717
0235551680: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-286-9196

4730-14-283-6214

4730-14-260-9368

4730-14-270-3220
Demi-Coquille Racco

142703220
86054: RNCC: 3 | RNVC: 2
9567158020: RNCC: 5 | RNVC: 2
86054: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-203-2359

4730-14-564-6900
Tube Nipple

145646900
P610320: RNCC: 3 | RNVC: 2

26 May 2010

4730-14-295-2742
Bouchon Raccord Rap

142952742
RBE6-8550-09IC: RNCC: 3 | RNVC: 2
VDP3324: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-238-4891
Tube Coupling Inverted Nut

142384891
D2604-7-136: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-569-5257
Quick Disconnect Coupling Assembly Set

145695257
NTA-212132: RNCC: 3 | RNVC: 2
NTA-212132: RNCC: 5 | RNVC: 2

23 Sep 2011

4730-14-561-1527
Tube To Boss Elbow

145611527
EQMA WCO 10-1/4 315B: RNCC: 3 | RNVC: 2
02100330: RNCC: 5 | RNVC: 2

22 Jun 2009

4730-14-247-6284
Tube To Boss Straight Adapter

142476284
9429993400: RNCC: 3 | RNVC: 2
29-9-142115-0: RNCC: 5 | RNVC: 2
37800288: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-399-8800
Quick Disconnect Coupling Half

143998800
N006-154-82: RNCC: 3 | RNVC: 2
RBE3-7200-IC4-5: RNCC: 5 | RNVC: 2
7729213003: RNCC: 5 | RNVC: 9
9959962: RNCC: 5 | RNVC: 9

11 Apr 1985

4730-14-568-6413
Sediment Strainer Element

145686413
NO PRIMARY REF 14-568-6413: RNCC: 3 | RNVC: 2
7016B.P-50: RNCC: 5 | RNVC: 2

23 Jun 2011

4730-14-388-7707
Tube To Boss Straight Adapter

143887707
92 08 10 100 CO NU: RNCC: 3 | RNVC: 2
4A8L10X100C0NU: RNCC: 3 | RNVC: 2
92-8-10X100C0NU: RNCC: 5 | RNVC: 2
5000165813: RNCC: 5 | RNVC: 2
5000165813: RNCC: 5 | RNVC: 9

29 Nov 1983

4730-14-311-3965
Self-Sealing Coupling Half

143113965
341A94-7500-10: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-444-0994
Pipe Flange

144440994
IB-BR3/8ARBP/DIV50: RNCC: 3 | RNVC: 2
IB-BR3/8ARBP: RNCC: 5 | RNVC: 2

18 Dec 1990

4730-14-432-6458
Tube To Hose Straight Adapter

144326458
ACAG13X15-21N: RNCC: 3 | RNVC: 2
LW127CP1308N: RNCC: 5 | RNVC: 2
5927983: RNCC: 5 | RNVC: 2

19 Jun 1989

4730-14-548-7402
Reducing Tube Coupling Nut

145487402
MAT862-3058A FEUILLE4: RNCC: 3 | RNVC: 2

6 Feb 2006

4730-14-334-2483
Tube Tee

143342483
GSM163-015F12: RNCC: 3 | RNVC: 2
GSM163-15F12: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-353-1499
Fluid Pressure Line Multiple Connector

143531499
73-063-2801: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-346-7111
Pipe Flange

143467111
6784-1EA28A: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-383-8683
Bulkhead Hose Connector

143838683
64353280001BREPAAH-F15A23-23DN32: RNCC: 3 | RNVC: 2

11 Apr 1983

4730-14-388-9158
Fluid Pressure Line Multiple Connector

143889158
CM141-79-102: RNCC: 3 | RNVC: 9
CM14179102: RNCC: 5 | RNVC: 2

29 Nov 1983

4730-14-457-4357
Quick Disconnect Coupling Half

144574357
RBE03-2100DKN: RNCC: 3 | RNVC: 2
91637027: RNCC: 5 | RNVC: 2

3 Sep 1992

4730-14-345-4746
Pipe Flange

143454746
CR0Q012-273MALE: RNCC: 3 | RNVC: 2
4730CG-273M: RNCC: 5 | RNVC: 2
7062TD1F1M273UA9NFEM: RNCC: 5 | RNVC: 9

5 Oct 1977

4730-14-572-5186
Hose Tee

145725186
A012724: RNCC: 3 | RNVC: 2
7421659411: RNCC: 5 | RNVC: 2
21659411: RNCC: 5 | RNVC: 2

10 Jul 2012

4730-14-256-0567
Union Vabco

142560567
UB20UA9M2: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-414-6508
Tube Tee

144146508
LL8450-08-93UK: RNCC: 3 | RNVC: 2
8450089366NU: RNCC: 5 | RNVC: 2

20 Feb 1987

4730-14-453-7186
Tube To Boss Straight Adapter

144537186
NO PRIMARY REF14-453-7186: RNCC: 3 | RNVC: 2
AMM15: RNCC: 5 | RNVC: 9
AM-M15: RNCC: 5 | RNVC: 9

5 Mar 1992

4730-14-383-1827
Fluid Passage Bolt

143831827
G1-15-267-59: RNCC: 3 | RNVC: 2
G1-15267-59: RNCC: 5 | RNVC: 2
G1-15-267-59: RNCC: 5 | RNVC: 2
G1-15267-59: RNCC: 5 | RNVC: 2
85-691-8750: RNCC: 6 | RNVC: 9

17 Mar 1983

4730-14-443-4640
Pipeline Flexible Spacer

144434640
2-544782-0: RNCC: 3 | RNVC: 2
2-544782-0: RNCC: 5 | RNVC: 9

23 Nov 1990

4730-14-402-1890
Tube To Boss Straight Adapter

144021890
F4XS20-3-4: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-032-1565
Contre Bride

140321565
CMT30E9030AF3ET3BISDE57REP4: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-511-6618
Quick Disconnect Coupling Half

145116618
NC4030040: RNCC: 3 | RNVC: 2

8 Jan 1999

4730-14-345-2579
Tube To Boss Straight Adapter

143452579
460334: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-312-8280
Fluid Pressure Line Multiple Connector

143128280
0249852500: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-317-4775

4730-14-260-3367
Raccord Special

142603367
485-001-234-0: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-456-5955
Tube To Boss Straight Adapter

144565955
4A20-27X200SNU: RNCC: 3 | RNVC: 2
82126010: RNCC: 5 | RNVC: 2
ATAS05810: RNCC: 5 | RNVC: 2
5005030381: RNCC: 5 | RNVC: 2

9 Jul 1992

4730-14-479-2308
Aiguille Siege

144792308
71190001104919A: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-313-5393

4730-14-350-9203

4730-14-495-5714
Union

144955714
A77623: RNCC: 3 | RNVC: 2
F300 0T 019 4956: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-262-1379

4730-14-250-7831

4730-14-314-3843
Pipe Flange

143143843
188114: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-503-1713
Bulkhead Hose Connector

145031713
RA1M527304102: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-468-9444
Tube Tee

144689444
51.11.046.19: RNCC: 3 | RNVC: 2

30 Mar 1994

4730-14-262-9898
Pipe Flange

142629898
DLT006362: RNCC: 3 | RNVC: 2
DLT006362: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-503-2065
Tube Coupling

145032065
RP1A502125502: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-543-4667
Solder Type Tube Fitting Plug

145434667
160-63193-87: RNCC: 3 | RNVC: 2
160-63193-87: RNCC: 5 | RNVC: 2

5 Nov 2004

4730-14-541-8594
Water Feeder Manifold

145418594
10670041: RNCC: 3 | RNVC: 2

26 Jun 2004

4730-14-415-2436
Tube Tee

144152436
4730HEING076,1X2,9-48,3X2,6: RNCC: 2 | RNVC: 2
U1238F21DE76,1X2,9ETDE48,3X2,6: RNCC: 5 | RNVC: 2

21 Apr 1987

4730-14-407-1158
Threaded Tube Fitting Plug

144071158
16530-0: RNCC: 3 | RNVC: 2

4 Feb 1986

4730-14-253-8343
Bouchon Filete

142538343
2-07522: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-471-7085
Bulkhead Hose Connector

144717085
LN327-01502DN25: RNCC: 3 | RNVC: 2

13 Sep 1994

4730-14-501-2377
Tube To Boss Straight Adapter

145012377
471.206: RNCC: 3 | RNVC: 2
471-206: RNCC: 3 | RNVC: 2
F300 0T 025 2782: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-373-0586
Tube Union

143730586
MAT201-01-00-0: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-343-7296
Fluid Pressure Line Multiple Connector

143437296
510-080-06: RNCC: 3 | RNVC: 2
2022082291: RNCC: 5 | RNVC: 2

13 Jul 1977

4730-14-324-1346
Barillet Cinq Voies

143241346
GSM163-006F8AVECECR0USRACC0RD: RNCC: 3 | RNVC: 2
GSM163-06F8AVECECR0USRACC0RD: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-565-9237
Fuel Feeder Manifold

145659237
124-01-076: RNCC: 3 | RNVC: 2

5 Oct 2010

4730-14-346-7104
Bride Speciale

143467104
6784-1DT80: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-429-5502
Quick Disconnect Coupling Half

144295502
RBE06-1150: RNCC: 3 | RNVC: 2

30 Jan 1989

4730-14-397-0248
Quick Disconnect Coupling Half

143970248
RBE06-1101/OD/IC/HP/VS/SP: RNCC: 3 | RNVC: 2
RBE06-1101-0DICHPVSSP: RNCC: 5 | RNVC: 2

1 Dec 1984

4730-14-324-7765
Tube Tee

143247765
GSM163-004F19AVECECROUSRACCORD: RNCC: 3 | RNVC: 2
GSM163-04F19AVECECR0USRACC0RD: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-314-7793
Fluid Pressure Line Multiple Connector

143147793
353117: RNCC: 3 | RNVC: 2
353117-80: RNCC: 5 | RNVC: 2
DBA353117: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-431-4047
Tube Union

144314047
NO PRIMARY REF14-431-4047: RNCC: 3 | RNVC: 2
36090MF1/2-1/4INOX: RNCC: 5 | RNVC: 9

17 Apr 1989

4730-14-546-0078
Fluid Pressure Line Multiple Connector

145460078
BJMA16S1/2CLNU: RNCC: 3 | RNVC: 2
071233016120000: RNCC: 5 | RNVC: 2

4 Jun 2005

4730-14-389-5153
Fluid Pressure Line Multiple Connector

143895153
365A75-2656-21: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-440-2198
Quick Disconnect Coupling Half

144402198
73-10: RNCC: 3 | RNVC: 2
91531495: RNCC: 5 | RNVC: 2

11 Jul 1990

4730-14-410-8857
Quick Disconnect Coupling Half

144108857
HPXN010-106-81: RNCC: 3 | RNVC: 2
N010-106-81: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-217-0039
Vis Sur Capacite Sp

142170039
773-410-873F20: RNCC: 3 | RNVC: 2
773-410-873F20: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-262-1565
Pipe Flange

142621565
7062DJ1F1F48-5XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-309-4183
Tube To Boss Straight Adapter

143094183
Q1-52-16-12X17CYL: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-221-9781
Bouchon Filete

142219781
NO PRIMARY REF14-221-9781: RNCC: 3 | RNVC: 2
10948: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-433-3248
Unite Enfichable

144333248
536772: RNCC: 3 | RNVC: 2
00536772: RNCC: 5 | RNVC: 2

19 Jul 1989

4730-14-234-9252

4730-14-226-3155
Obturateur Raccord

142263155
579-306-002-0: RNCC: 3 | RNVC: 2
9091-091-0: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-355-5599
Tube To Boss Straight Adapter

143555599
G1DM13-8X13CYL: RNCC: 3 | RNVC: 2
LV124-CS1304N: RNCC: 3 | RNVC: 2
5BAG13-8-13CYL: RNCC: 3 | RNVC: 2
AAG13X8-13N: RNCC: 5 | RNVC: 2

19 Mar 1979

4730-14-245-2316
Raccord Special

142452316
NO PRIMARY REF14-245-2316: RNCC: 3 | RNVC: 2
105705: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-469-3860
Fluid Pressure Line Multiple Connector

144693860
72051B-910356: RNCC: 3 | RNVC: 2
72051B: RNCC: 5 | RNVC: 2
910356: RNCC: 5 | RNVC: 2

20 Apr 1994

4730-14-428-1977
Vis Sur Capacite A

144281977
81421760: RNCC: 3 | RNVC: 2

3 Dec 1988

4730-14-488-4059
Fluid Pressure Line Multiple Connector

144884059
U1237234: RNCC: 3 | RNVC: 2
U12372-34: RNCC: 5 | RNVC: 2

7 May 1997

4730-14-498-5634
Tube To Boss Straight Adapter

144985634
PAA5835006: RNCC: 3 | RNVC: 2
PAA58-35-006: RNCC: 3 | RNVC: 2
F300 0T 005 7235: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-437-0023
Quick Disconnect Coupling Half

144370023
RBE06-7151/OD/IC/HP: RNCC: 3 | RNVC: 2
RBE6-7151ODICHP: RNCC: 5 | RNVC: 2
91584991: RNCC: 5 | RNVC: 2

10 Jan 1990

4730-14-211-0453
Tube Fitting Clinch Sleeve

142110453
405-8RR: RNCC: 3 | RNVC: 2
501182: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-040-2732
Corps Presse-Etoupe

140402732
NO PRIMARY REF14-040-2732: RNCC: 3 | RNVC: 2
S264217: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-274-0708
Tube To Boss Straight Adapter

142740708
9120252766: RNCC: 3 | RNVC: 2
CA22-25-21-27C0: RNCC: 5 | RNVC: 9
CA22-25-21X27BSPC0HP: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-216-4941

4730-14-294-1494

4730-14-367-0471

4730-14-266-3400
Tube Coupling Inverted Nut

142663400
100-6: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-227-2990
Raccord Coude Male

142272990
2-01676: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-487-5436
Flange To Tube Elbow

144875436
RA1M521304081U1: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-288-1485

4730-14-432-2401
Tube Union

144322401
FIG9NPT: RNCC: 3 | RNVC: 2

30 May 1989

4730-14-382-8715
Tube To Boss Straight Adapter

143828715
PE60801H06: RNCC: 3 | RNVC: 2

26 Jul 2000

4730-14-504-1720
Lubrication Fitting

145041720
1442447X1: RNCC: 3 | RNVC: 2

11 Feb 1998

4730-14-423-4274
Pipe Flange

144234274
UA50088006PN150-11C1DN20: RNCC: 2 | RNVC: 2
4730HCPN150DN02011C1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-407-0237
Quick Disconnect Coupling Half

144070237
RBE08-6152: RNCC: 3 | RNVC: 2
RBE8-6152: RNCC: 5 | RNVC: 2

29 Jan 1986

4730-14-273-5098
Tube To Boss Straight Adapter

142735098
7062BB1RCET2-30C337A: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-360-4251
Tube Coupling

143604251
E4M782-31: RNCC: 3 | RNVC: 2
85-688-9711: RNCC: 6 | RNVC: 9

23 Nov 1979

4730-14-537-8416
Quick Disconnect Plug

145378416
1690-114T: RNCC: 3 | RNVC: 2
622119: RNCC: 5 | RNVC: 2

27 Nov 2003

4730-14-222-6551
Tube Fitting Brazing Ferrule

142226551
GSM1297F1AF1BTABLEAU2D1-25I15: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-491-5096
Tube To Boss Straight Adapter

144915096
NO PRIMARY REF14-491-5096: RNCC: 3 | RNVC: 2
0854812900: RNCC: 5 | RNVC: 9
F300 0T 003 1738: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-213-5711
Tube Coupling Inverted Nut

142135711
6899-5614: RNCC: 3 | RNVC: 9

1 Jan 1964

4730-14-463-2497
Manchette Double

144632497
LN326-056-14DN32: RNCC: 3 | RNVC: 2

2 Jun 1993

4730-14-486-0289
Straight Tubing Connector

144860289
1420544: RNCC: 3 | RNVC: 2
1420544-4: RNCC: 5 | RNVC: 2

26 Feb 1997

4730-14-402-5442
Quick Disconnect Coupling Half

144025442
RBE11-6808: RNCC: 3 | RNVC: 2

19 Jul 1985

4730-14-209-0793

4730-14-453-6819
Sediment Strainer Element

144536819
SOC 1/89 PIECE 8: RNCC: 3 | RNVC: 9

5 Mar 1992

4730-14-412-3327
Quick Disconnect Coupling Half

144123327
RBE11-6809/IC/0: RNCC: 3 | RNVC: 2
RBE11-6809IC0: RNCC: 5 | RNVC: 2

8 Oct 1986

4730-14-549-2502
Pressure Plug Retention Cap

145492502
0462A11-03: RNCC: 3 | RNVC: 2

15 Mar 2006

4730-14-342-4479
Tube Fitting Flared Sleeve

143424479
NO PRIMARY REF14-342-4479: RNCC: 3 | RNVC: 2
105058: RNCC: 5 | RNVC: 9
105058-01: RNCC: 5 | RNVC: 9

16 May 1977

4730-14-280-7305
Bride

142807305
264095: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-576-3429
Hose Clamp

145763429
138518: RNCC: 3 | RNVC: 2

13 Jun 2013

4730-14-237-7081
Vis De Genouillere

142377081
87026: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-208-8989
Raccordsouple Equi

142088989
AF12-70-2X: RNCC: 3 | RNVC: 2
HBT10DN12: RNCC: 5 | RNVC: 1

1 Jan 1964

4730-14-314-0604
Swivel Retaining Pipe Flange

143140604
773-425-536DET7: RNCC: 3 | RNVC: 2
773-425-536DET7: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-357-5575
Tube To Boss Straight Adapter

143575575
P4-1204-16-12-17CYL: RNCC: 3 | RNVC: 2
16311534: RNCC: 5 | RNVC: 2
91370939: RNCC: 5 | RNVC: 2
16311534: RNCC: 5 | RNVC: 9
91370939: RNCC: 5 | RNVC: 9
16311534: RNCC: 5 | RNVC: 9
91370939: RNCC: 5 | RNVC: 9

7 Jun 1979

4730-14-559-5625
Bulkhead Hose Connector

145595625
ABS0450-0606: RNCC: 1 | RNVC: 2
PE29016-06: RNCC: 3 | RNVC: 2

26 Jan 2009

4730-14-456-6394
Pipe Flange

144566394
Y07176-00-0000P007: RNCC: 3 | RNVC: 2

9 Jul 1992

4730-14-404-9800
Tube To Boss Straight Adapter

144049800
00 114 08 10 B: RNCC: 3 | RNVC: 2
00 114 G21 10 C: RNCC: 5 | RNVC: 2
91574103: RNCC: 5 | RNVC: 2
4738G21-10C: RNCC: 5 | RNVC: 9

20 Nov 1985

4730-14-457-8022
Pipe Flange

144578022
4730JADN040-11D1S: RNCC: 2 | RNVC: 2

24 Sep 1992

4730-14-556-8967
Hose Coupling

145568967
530 1 LG 120 MM: RNCC: 3 | RNVC: 2

21 Apr 2008

4730-14-395-3672
Embout A Souder

143953672
N0189F34A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-337-0290
Embase A Riveter

143370290
520: RNCC: 3 | RNVC: 2
520: RNCC: 5 | RNVC: 2

7 Oct 1976

4730-14-518-3750
Quick Disconnect Coupling Half

145183750
RBE06.1813/IC/FB/JV/OD/HP: RNCC: 3 | RNVC: 2

2 Feb 2000

4730-14-344-8297
Piece De Raccordeme

143448297
GSM164-006F9: RNCC: 3 | RNVC: 2
GSM164-06F9: RNCC: 5 | RNVC: 2

9 Sep 1977

4730-14-383-1809
Pipe Flange

143831809
4730GA133: RNCC: 2 | RNVC: 2
MEC10350: RNCC: 3 | RNVC: 2
BN324-552F4-133: RNCC: 5 | RNVC: 2

17 Mar 1983

4730-14-350-1362
Pipe Flange

143501362
7062TD1F1M88-9UA9NFEM: RNCC: 2 | RNVC: 2
4730CG-88,9M: RNCC: 5 | RNVC: 2

14 Jun 1978

4730-14-465-1125
Cale De Reglage

144651125
MAT166-0063F9: RNCC: 3 | RNVC: 2

15 Sep 1993

4730-14-455-5448
Tube Coupling

144555448
GM10011-108: RNCC: 3 | RNVC: 2

27 May 1992

4730-14-460-1972
Tube To Boss Straight Adapter

144601972
6270132000: RNCC: 3 | RNVC: 2
UMCAG21X20-27N: RNCC: 5 | RNVC: 2

14 Jan 1993

4730-14-212-1639
Fluid Pressure Line Multiple Connector

142121639
319A75-10-076: RNCC: 3 | RNVC: 2
85-689-9378: RNCC: 6 | RNVC: 9

5 Jul 1980

4730-14-311-6800
Tube To Boss Straight Adapter

143116800
702A30-0907-20: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-373-9879
Quick Disconnect Coupling Half

143739879
NO PRIMARY REF14-373-9879: RNCC: 3 | RNVC: 2
4721F114E: RNCC: 5 | RNVC: 9
PM40-49-40-45: RNCC: 5 | RNVC: 9

8 Dec 1981

4730-14-562-7227
Tube Tee

145627227
TR22/18/22LCFX: RNCC: 3 | RNVC: 2
TR22/18/22LCFX: RNCC: 5 | RNVC: 9

17 Nov 2009

4730-14-423-3927
Pipe Flange

144233927
E29203-01APN16DN300Z3CND18-12: RNCC: 2 | RNVC: 2
E29203-01APN16DN300Z2CND17-12: RNCC: 5 | RNVC: 2
4730JEDN300: RNCC: 5 | RNVC: 2

16 Apr 1988

4730-14-381-3864
Pipe Flange

143813864
601151: RNCC: 3 | RNVC: 2
00601151: RNCC: 5 | RNVC: 2

25 Jan 1983

4730-14-553-5319
Tube To Boss Straight Adapter

145535319
P2770015801: RNCC: 3 | RNVC: 2
7420781275: RNCC: 5 | RNVC: 2

12 Apr 2007

4730-14-268-7225
Fluid Pressure Line Multiple Connector

142687225
R13012: RNCC: 3 | RNVC: 2
RA13012: RNCC: 5 | RNVC: 2
91299134: RNCC: 5 | RNVC: 2
91299134: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-507-1157
Tube To Boss Straight Adapter

145071157
05352: RNCC: 3 | RNVC: 2
5352: RNCC: 5 | RNVC: 2

15 Jun 1998

4730-14-365-3013
Quick Disconnect Coupling Assembly

143653013
SJS25BDB: RNCC: 3 | RNVC: 2

19 Sep 1980

4730-14-302-8475
Tube To Boss Straight Adapter

143028475
124356: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-224-2658

4730-14-442-2015
Pipe Flange

144422015
7493016: RNCC: 3 | RNVC: 2
45186135: RNCC: 5 | RNVC: 2
7493016: RNCC: 5 | RNVC: 9

3 Oct 1990

4730-14-215-1524

4730-14-323-8415

4730-14-321-7394

4730-14-475-7882
Tube To Boss Straight Adapter

144757882
G4BRAB6-1-2: RNCC: 3 | RNVC: 2
322362: RNCC: 5 | RNVC: 2
G4BRAB6-1-2: RNCC: 5 | RNVC: 2

3 May 1995

4730-14-330-1083
Tube To Boss Straight Adapter

143301083
8-73CHRACC0RD: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-322-9661
Sediment Strainer Element

143229661
121E93-145-48-2: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-511-9204
Tube Coupling

145119204
0-3751SB20A: RNCC: 3 | RNVC: 2

28 Jan 1999

4730-14-419-0196
Tube To Boss Straight Adapter

144190196
F4BRAB14-1/2: RNCC: 3 | RNVC: 2
F4BRAB14-1/2: RNCC: 3 | RNVC: 9

29 Sep 1987

4730-14-385-7097
Tube To Boss Straight Adapter

143857097
243GCU16 3-4: RNCC: 3 | RNVC: 2
243GC16 3-4: RNCC: 3 | RNVC: 9

26 Jul 1983

4730-14-426-7959
Tube Tee

144267959
4730HEING219,1X8-60,3X2,9: RNCC: 2 | RNVC: 2

22 Sep 1988

Load More Results