What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 131 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 131 of 185

4730-14-332-2769
Flexible Tube Coupling Assembly

143322769
L40-03: RNCC: 3 | RNVC: 2
DHS613-211-33: RNCC: 5 | RNVC: 2
L40-0-3: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-561-2429
Fluid Flow Restrictor

145612429
98F20008247000: RNCC: 3 | RNVC: 2

29 Jun 2009

4730-14-236-0143
Raccord Special

142360143
18-99749: RNCC: 3 | RNVC: 2
18-99749: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-212-1194

4730-14-557-3084
Special Nipple

145573084
DET05AEBTDAM008: RNCC: 3 | RNVC: 2

2 Jun 2008

4730-14-253-2119
Bouchon De Vidange

142532119
0705749400: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-268-6500

4730-14-431-9402
Anchor And Reinforcement Pipe Clamp

144319402
56609: RNCC: 3 | RNVC: 2

16 May 1989

4730-14-507-0504
Tube Tee

145070504
PE66718E080606: RNCC: 3 | RNVC: 2

8 Jun 1998

4730-14-387-3134
Fluid Pressure Line Multiple Connector

143873134
89981217: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-208-5467
Fluid Passage Bolt

142085467
0000122792: RNCC: 3 | RNVC: 2
122792: RNCC: 5 | RNVC: 9
0000122792: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-503-7205
Fluid Flow Restrictor

145037205
01365000: RNCC: 3 | RNVC: 2

28 Jan 1998

4730-14-483-2797
Hose Coupling Assembly

144832797
DA2C729002502: RNCC: 3 | RNVC: 2

29 Aug 1996

4730-14-503-1728
Bulkhead Hose Connector

145031728
RA1M534004150: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-307-3936
Pipe Expansion Joint

143073936
DLT037098: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-467-7635
Fluid Pressure Line Multiple Connector

144677635
0322857000: RNCC: 3 | RNVC: 2

27 Jan 1994

4730-14-399-4675
Quick Disconnect Coupling Half

143994675
16702752: RNCC: 3 | RNVC: 2
16702752C: RNCC: 5 | RNVC: 2
96083410: RNCC: 5 | RNVC: 2

6 Mar 1985

4730-14-338-7023
Pipe Flange

143387023
217457: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-260-8360
Quick Disconnect Coupling Half

142608360
U120/13/7,5: RNCC: 3 | RNVC: 2
U120-13-7-5: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-263-2839
Compensateur De Dil

142632839
D8327-29310B: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-261-7854
Tube To Boss Straight Adapter

142617854
UML30-1BSPC: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-430-4598
Tube To Boss Straight Adapter

144304598
4A20-22X150: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-228-6817
Tube Tee

142286817
GSM1297FE3-5TABLEAU2: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-377-4841
Tube To Boss Straight Adapter

143774841
UMK14X8-13NNU: RNCC: 3 | RNVC: 2

17 May 1982

4730-14-575-9377
Fluid Pressure Line Multiple Connector

145759377
NO PRIMARY REF 14-575-9377: RNCC: 3 | RNVC: 2
003R015C: RNCC: 5 | RNVC: 2

16 May 2013

4730-14-243-6135
Prise Dequerre Ense

142436135
NO PRIMARY REF14-243-6135: RNCC: 3 | RNVC: 2
22012: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-521-5630
Exhaust-Intake Pneumatic Muffler

145215630
P6M-PAB2: RNCC: 3 | RNVC: 2
500-2D: RNCC: 5 | RNVC: 2
18850009-1: RNCC: 5 | RNVC: 2

23 Aug 2000

4730-14-485-5968
Raccord Injecteur

144855968
26020005172: RNCC: 3 | RNVC: 2
212100-03: RNCC: 5 | RNVC: 2

31 Jan 1997

4730-14-324-2228
Pipe Flange

143242228
RUAN7518-30: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-330-9586
Tube Union

143309586
NAV2-130: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-416-5784
Quick Disconnect Wye

144165784
RBS06-8103: RNCC: 3 | RNVC: 2

18 Jun 1987

4730-14-393-1748
Tube To Boss Straight Adapter

143931748
NO PRIMARY REF14-393-1748: RNCC: 3 | RNVC: 2
9-329-2757-218: RNCC: 5 | RNVC: 9

12 Apr 1984

4730-14-365-2823

4730-14-364-9590
Tube To Boss Straight Adapter

143649590
58420: RNCC: 3 | RNVC: 2
58420: RNCC: 5 | RNVC: 2
85-691-3044: RNCC: 6 | RNVC: 9

2 Sep 1980

4730-14-412-6179
Tube To Boss Straight Adapter

144126179
MAT164-0353F20: RNCC: 3 | RNVC: 2
GSM164-026F20: RNCC: 3 | RNVC: 2

15 Oct 1986

4730-14-556-9133
Tube To Boss Straight Adapter

145569133
3010.05.10: RNCC: 3 | RNVC: 2

22 Apr 2008

4730-14-556-9943
Hose Coupling

145569943
P302: RNCC: 3 | RNVC: 2

28 Apr 2008

4730-14-217-2863

4730-14-568-1710
Pipe To Hose Union

145681710
432969: RNCC: 3 | RNVC: 2
01650810: RNCC: 3 | RNVC: 2

11 May 2011

4730-14-488-2273
Tube To Boss Straight Adapter

144882273
5005130312: RNCC: 3 | RNVC: 2

23 Apr 1997

4730-14-454-8569
Fluid Pressure Line Multiple Connector

144548569
31408: RNCC: 3 | RNVC: 9
31408: RNCC: 5 | RNVC: 9
31408: RNCC: 5 | RNVC: 9
F300 0T 002 6045: RNCC: 6 | RNVC: 9

24 Apr 1992

4730-14-311-8578
Pipe Flange

143118578
0064630890: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-542-7077
Bulkhead Hose Connector

145427077
4791113106: RNCC: 3 | RNVC: 2

28 Jul 2004

4730-14-546-3245
Straight Tubing Connector

145463245
558312: RNCC: 3 | RNVC: 2

24 Jun 2005

4730-14-384-0298
Lubrication Fitting

143840298
83234836050: RNCC: 3 | RNVC: 2

4 May 1983

4730-14-459-0797
Raccord

144590797
DLP756483: RNCC: 3 | RNVC: 2

19 Nov 1992

4730-14-425-7717
Corps De Purge

144257717
360A76-1039-20: RNCC: 3 | RNVC: 2

21 Jul 1988

4730-14-041-2458
Tube To Boss Straight Adapter

140412458
Q1-52-25-21X27C0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-536-6707
Tube To Boss Straight Adapter

145366707
IC2086-12-04: RNCC: 3 | RNVC: 2

10 Sep 2003

4730-14-276-9906
Tube Tee

142769906
TR3-101012-631X6226: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-356-3299
Bulkhead Hose Connector

143563299
0294301630: RNCC: 3 | RNVC: 2
302-258-004P: RNCC: 5 | RNVC: 2

25 Apr 1979

4730-14-452-3330
Hose To Boss Straight Adapter

144523330
01911621: RNCC: 3 | RNVC: 2
191-16-21: RNCC: 5 | RNVC: 2

8 Jan 1992

4730-14-300-7526
Tube Tee

143007526
GSM523-026F46: RNCC: 3 | RNVC: 2
411MA127FB10: RNCC: 5 | RNVC: 2
GSM523-26F46: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-482-5208
Hydraulic Manifold Assembly

144825208
18714-001: RNCC: 3 | RNVC: 2
18714-001-00: RNCC: 5 | RNVC: 2

11 Jul 1996

4730-14-511-1190
Fluid Flow Restrictor

145111190
186908: RNCC: 3 | RNVC: 2
186908-001: RNCC: 5 | RNVC: 9

2 Dec 1998

4730-14-364-7558
Tube To Boss Straight Adapter

143647558
NO PRIMARY REF14-364-7558: RNCC: 3 | RNVC: 2
100008809: RNCC: 5 | RNVC: 9

2 Sep 1980

4730-14-376-5374
Tube To Boss Straight Adapter

143765374
NO PRIMARY REF14-376-5374: RNCC: 3 | RNVC: 2
454188269: RNCC: 5 | RNVC: 2
454188269: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-327-3922
Bulkhead Hose Connector

143273922
R33469REP1A6-11ET12: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-498-6931
Tube To Boss Straight Adapter

144986931
E79168-73: RNCC: 3 | RNVC: 2
5000806244: RNCC: 3 | RNVC: 2
E79168-73: RNCC: 3 | RNVC: 9
F300 0T 007 8297: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-345-6593
Tube To Boss Straight Adapter

143456593
A0174-323: RNCC: 3 | RNVC: 2
J00679-16-0000P004: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-205-1734
Coude A Ecrou Artic

142051734
NO PRIMARY REF14-205-1734: RNCC: 3 | RNVC: 2
26258: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-427-0567
Couvercle

144270567
B5110-044/N: RNCC: 3 | RNVC: 2
GM2688/CU-AL: RNCC: 5 | RNVC: 2

6 Oct 1988

4730-14-561-3983
Flange To Boss Straight Adapter

145613983
XBP RD 40-28 L: RNCC: 3 | RNVC: 2
FS0003158: RNCC: 6 | RNVC: 9

10 Jul 2009

4730-14-505-3442
Quick Disconnect Coupling Half

145053442
SMK20-M14X150-PB: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-409-9391
Fluid Pressure Line Multiple Connector

144099391
1557-63: RNCC: 3 | RNVC: 2
9151593380: RNCC: 5 | RNVC: 2
1557-78: RNCC: 5 | RNVC: 2
9153871880: RNCC: 5 | RNVC: 2
9151593380: RNCC: 5 | RNVC: 2

4 Jun 1986

4730-14-373-4854
Raccordem Manchette

143734854
GSM657-014F14REPB: RNCC: 3 | RNVC: 2
B0320-009F6REPB: RNCC: 5 | RNVC: 2

21 Oct 1981

4730-14-553-7492
Flange To Boss Elbow

145537492
9943700060: RNCC: 3 | RNVC: 2

21 May 2007

4730-14-494-9538
Fluid Passage Bolt

144949538
5450206: RNCC: 3 | RNVC: 2
F300 0T 018 1103: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-469-6800
Fluid Flow Restrictor

144696800
DA2C721200923: RNCC: 3 | RNVC: 2

4 May 1994

4730-14-514-9849
Quick Disconnect Coupling Half

145149849
NBA.113: RNCC: 3 | RNVC: 2

25 Jun 1999

4730-14-514-9914
Tube To Boss Swivel Joint

145149914
SM 606 MF: RNCC: 3 | RNVC: 2
SM606MF: RNCC: 5 | RNVC: 2

25 Jun 1999

4730-14-408-4520
Tube Tee

144084520
Q15T12SNU: RNCC: 3 | RNVC: 2
8904120066NU: RNCC: 3 | RNVC: 2

27 Mar 1986

4730-14-303-3413
Fluid Pressure Line Multiple Connector

143033413
150184: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-399-9883
Fluid Pressure Line Multiple Connector

143999883
604023: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-269-2293
Sediment Strainer Element

142692293
B0553NK3APL4REP8F: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-542-4002
Quick-Disconnect Nipple

145424002
20025: RNCC: 3 | RNVC: 2

8 Jul 2004

4730-14-335-1600
Lubrication Fitting

143351600
NIPA3: RNCC: 3 | RNVC: 2

3 Jun 1976

4730-14-515-4717
Hose To Gas Fitting Straight Adapter

145154717
A016016 04 05: RNCC: 3 | RNVC: 2
2022-G13-05: RNCC: 5 | RNVC: 2
2022-G13-5: RNCC: 5 | RNVC: 2

15 Jul 1999

4730-14-398-3315
Tube To Boss Straight Adapter

143983315
NO PRIMARY REF14-398-3315: RNCC: 3 | RNVC: 2
RID1/8-4: RNCC: 5 | RNVC: 9

31 Jan 1985

4730-14-300-5405
Flexible Tube Coupling Assembly

143005405
LR32X25.A.2: RNCC: 3 | RNVC: 2
LR32-25A2: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-231-3640
Tube Fitting Brazing Ferrule

142313640
GSM1297FF1AF1BTABLEAU2D1-10I7: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-299-1555
Fluid Pressure Line Multiple Connector

142991555
121E75-481-05-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-363-2049

4730-14-366-5873

4730-14-360-5891

4730-14-524-3381
Tube Union

145243381
M4ZS450D3355: RNCC: 3 | RNVC: 2

14 Mar 2001

4730-14-332-0357
Diaphragme

143320357
6784-1CI8-40: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-419-9540
Croix Orientable

144199540
S4710X0002-8497: RNCC: 3 | RNVC: 2

10 Nov 1987

4730-14-463-7210
Tube Tee

144637210
111-08: RNCC: 3 | RNVC: 2
89486704: RNCC: 5 | RNVC: 2

23 Jun 1993

4730-14-339-0661
Raccordement Bride

143390661
RK6154REP13ET14: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-339-8320

4730-14-240-8964

4730-14-478-0888
Tube Tee

144780888
T06LLA3C: RNCC: 3 | RNVC: 2
T6LLA3C: RNCC: 5 | RNVC: 9
T6LLA3C: RNCC: 5 | RNVC: 9

11 Oct 1995

4730-14-405-4414
Tube Repair Plug

144054414
T7: RNCC: 3 | RNVC: 2

27 Nov 1985

4730-14-321-7601

4730-14-241-9219
Soufflet Tombac

142419219
104T0MBACSP65X90150NDESC0LLETS3L: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-433-3763
Tube Fitting Brazing Ferrule

144333763
DLT024684: RNCC: 3 | RNVC: 2
DLT565191BREP13AFOLIO14-1/3: RNCC: 5 | RNVC: 2

24 Jul 1989

4730-14-331-6844
Fluid Passage Bolt

143316844
13034-6: RNCC: 3 | RNVC: 2
0944700041: RNCC: 5 | RNVC: 2
13034-6: RNCC: 5 | RNVC: 9
0944700041: RNCC: 5 | RNVC: 9
944700041: RNCC: 5 | RNVC: 9

27 Aug 1997

4730-14-427-3270
Tube Tee

144273270
4730HDEG219,1X5,6: RNCC: 2 | RNVC: 2

13 Oct 1988

4730-14-499-4063
Tube To Boss Straight Adapter

144994063
A07140222: RNCC: 3 | RNVC: 2
00B195211: RNCC: 5 | RNVC: 2
A07140222: RNCC: 5 | RNVC: 9
626.28546.1: RNCC: 5 | RNVC: 9

29 Oct 1997

4730-14-547-2209
Pipeline Flexible Spacer

145472209
865300-8: RNCC: 3 | RNVC: 2

5 Oct 2005

4730-14-404-4073
Tube Fitting Flared Sleeve

144044073
808012 3/8 1/2: RNCC: 3 | RNVC: 2

30 Oct 1985

4730-14-514-1681
Tube To Boss Straight Adapter

145141681
15221-9569-0: RNCC: 3 | RNVC: 2

28 Apr 1999

4730-14-415-2437
Tube Tee

144152437
4730HDING088,9X3,2-33,7X2,3: RNCC: 2 | RNVC: 2
U1238F22DE88,9X3,2ETDE33,7X2,3: RNCC: 5 | RNVC: 2

21 Apr 1987

4730-14-426-7718
Tube Tee

144267718
4730HEING060,3X4-42,4X3,6: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-428-9447
Pipe Flange

144289447
4730JAPN150DN400-11B2S-22,2: RNCC: 2 | RNVC: 2

28 Dec 1988

4730-14-364-4932
Tube To Boss Straight Adapter

143644932
101375-00200: RNCC: 3 | RNVC: 2
VDPM02636: RNCC: 5 | RNVC: 2

2 Sep 1980

4730-14-556-4027
Soil Pipe Trap

145564027
NO PRIMARY REF 14-556-4027: RNCC: 3 | RNVC: 2
102341: RNCC: 5 | RNVC: 2

4 Mar 2008

4730-14-495-1732
Union

144951732
NO PRIMARY REF14-495-1732: RNCC: 3 | RNVC: 2
CH258011: RNCC: 5 | RNVC: 9
F300 0T 018 6112: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-494-5268
Contre-Ecrou

144945268
510 101 40: RNCC: 3 | RNVC: 2
F300 0T 017 4439: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-566-6180
Fluid Pressure Line Multiple Connector

145666180
MDS81H315: RNCC: 3 | RNVC: 2

30 Nov 2010

4730-14-284-5778
Tube Fitting Flared Sleeve

142845778
86405: RNCC: 3 | RNVC: 2
9567158330: RNCC: 5 | RNVC: 2
86405: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-303-3426
Tube To Boss Straight Adapter

143033426
401101167: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-408-4495
Tube To Boss Straight Adapter

144084495
LW110-NC0610S: RNCC: 3 | RNVC: 2
8901066047NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-552-1134
Straight Tubing Connector

145521134
0000270070: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-263-7476
Tube Tee

142637476
T121: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-202-9647
Fluid Pressure Line Multiple Connector

142029647
109-10NN: RNCC: 3 | RNVC: 2
0946750910: RNCC: 5 | RNVC: 2
0946750910: RNCC: 5 | RNVC: 9
946750910: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-14-438-3856
Tube Coupling

144383856
4730HL-3DE13,5: RNCC: 2 | RNVC: 2
Y07134-01-0000P003DE13,5: RNCC: 3 | RNVC: 2

19 Mar 1990

4730-14-379-0806
Solder Type Tube Fitting Plug

143790806
0294302930: RNCC: 3 | RNVC: 2
302-406-101-0: RNCC: 5 | RNVC: 2

6 Sep 1982

4730-14-347-8064
Tube Tee

143478064
1RT14X18X12: RNCC: 3 | RNVC: 2
99-620-8-020-1-8: RNCC: 5 | RNVC: 2
99620802018: RNCC: 5 | RNVC: 2

1 Mar 1978

4730-14-453-4133
Tube Union

144534133
160-70721-39: RNCC: 3 | RNVC: 2

19 Feb 1992

4730-14-518-3996
Hose Expansion Ring

145183996
K5-1388-0: RNCC: 3 | RNVC: 2

4 Feb 2000

4730-14-398-7507
Coupleur Femelle

143987507
1750-10: RNCC: 3 | RNVC: 9
5410820: RNCC: 5 | RNVC: 9
1743-10-9: RNCC: 5 | RNVC: 9

6 Feb 1985

4730-14-353-7238
Tube Coupling Nut Assembly

143537238
E-JET12P: RNCC: 3 | RNVC: 2
EJET12P: RNCC: 5 | RNVC: 2
KE-JET12P: RNCC: 5 | RNVC: 2

16 Jan 1979

4730-14-362-9052

4730-14-309-4124

4730-14-252-7401

4730-14-264-6620
Tube Tee

142646620
18-16-15-21C0: RNCC: 3 | RNVC: 2
42500095: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-350-1372

4730-14-260-9267

4730-14-225-3874

4730-14-347-6374
Tube Coupling

143476374
0-3751SF16A: RNCC: 3 | RNVC: 2
0-3751SF16A: RNCC: 5 | RNVC: 9

1 Mar 1978

4730-14-443-4649
Fluid Passage Bolt

144434649
2-542867-3: RNCC: 3 | RNVC: 2
2-542867-3: RNCC: 5 | RNVC: 9

23 Nov 1990

4730-14-339-1541
Tube To Boss Straight Adapter

143391541
1DM12 1-4BGS: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-321-5837
Pipe Flange

143215837
7068F152-4: RNCC: 2 | RNVC: 2

1 Jan 1975

4730-14-339-5347
Support De Filtre

143395347
80811: RNCC: 3 | RNVC: 2

18 Jan 1977

4730-14-576-1859
Flange To Tube Straight Adapter

145761859
M2821351700000: RNCC: 3 | RNVC: 2

4 Jun 2013

4730-14-334-2645

4730-14-432-5399
Tuyau Flexi Raccord

144325399
GMIANP030-01: RNCC: 3 | RNVC: 2

14 Jun 1989

4730-14-353-0743
Quick Disconnect Coupling Half

143530743
RBE19-2105DKJ: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-300-7336
Fluid Passage Bolt

143007336
3097-14-01-006: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-262-9646
Pipe Flange

142629646
DLT006280: RNCC: 3 | RNVC: 2
DLT006280: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-504-0212
Quick Disconnect Reducer

145040212
11291: RNCC: 3 | RNVC: 2

4 Feb 1998

4730-14-427-3357
Tube Tee

144273357
4730HDING273X6,3-168,3X4,5: RNCC: 2 | RNVC: 2

13 Oct 1988

4730-14-563-7483
Pipe Reducer

145637483
24-20HMK4S: RNCC: 3 | RNVC: 2
A231004000453: RNCC: 5 | RNVC: 2

10 Mar 2010

4730-14-437-3893
Tube To Boss Straight Adapter

144373893
F4BXS6-1-4: RNCC: 3 | RNVC: 2
F4BXS6-1-4: RNCC: 3 | RNVC: 9
F4BXS6-1/4: RNCC: 5 | RNVC: 9

31 Jan 1990

4730-14-272-7775
Support De Refroidi

142727775
15933: RNCC: 3 | RNVC: 2
01593377: RNCC: 5 | RNVC: 2
9235D: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-202-6555

4730-14-444-9959
Tube Union

144449959
HRAB16: RNCC: 3 | RNVC: 2

30 Jan 1991

4730-14-253-9719
Raccord Special

142539719
PR47282: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-213-4813

4730-14-311-5845
Tube To Boss Straight Adapter

143115845
91053034: RNCC: 3 | RNVC: 2
A2-30-26X34BSPC0: RNCC: 5 | RNVC: 9
A2-30-26-34C0: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-430-3827
Anchor And Reinforcement Pipe Clamp

144303827
0177-02-07-01: RNCC: 3 | RNVC: 2

15 Mar 1989

4730-14-449-7646
Quick-Disconnect Nipple

144497646
BN324-621DN40: RNCC: 2 | RNVC: 2

6 Sep 1991

4730-14-380-9721
Tube To Boss Straight Adapter

143809721
UMSI6M3-8BSPT: RNCC: 3 | RNVC: 9

14 Dec 1982

4730-14-424-6473
Tube To Boss Straight Adapter

144246473
91681710: RNCC: 3 | RNVC: 2
461182: RNCC: 5 | RNVC: 2
AMF17-10: RNCC: 5 | RNVC: 9

2 Jun 1988

4730-14-365-2786

4730-14-365-2883

4730-14-478-1147
Tube-Hose Fitting Compression Sleeve

144781147
743 T 16: RNCC: 3 | RNVC: 2
743T16: RNCC: 5 | RNVC: 2
74743T16: RNCC: 5 | RNVC: 2

11 Oct 1995

4730-14-478-1145
Tube-Hose Fitting Compression Sleeve

144781145
743 T 08: RNCC: 3 | RNVC: 2
743T08: RNCC: 5 | RNVC: 2
74743T08: RNCC: 5 | RNVC: 2

11 Oct 1995

4730-14-215-1534
Raccord Special Equ

142151534
325V32V: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-570-5926
Fluid Passage Bolt

145705926
A561132: RNCC: 3 | RNVC: 2

9 Jan 2012

4730-14-562-1835
Tube Nipple

145621835
3106 06 10: RNCC: 3 | RNVC: 2
FS0002458: RNCC: 6 | RNVC: 9

6 Oct 2009

4730-14-563-6569
Tube To Boss Swivel Joint

145636569
A05051508: RNCC: 3 | RNVC: 2

3 Mar 2010

4730-14-562-1784
Fluid Passage Bolt

145621784
3527 00 17: RNCC: 3 | RNVC: 2
FS0002446: RNCC: 6 | RNVC: 9

6 Oct 2009

4730-14-411-5415
Te

144115415
520181: RNCC: 3 | RNVC: 2

20 Aug 1986

4730-14-301-7994
Corps De Raccord

143017994
NO PRIMARY REF14-301-7994: RNCC: 3 | RNVC: 2
BNC311961REP34: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-341-7987
Lance Ecrou Command

143417987
19LY: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-572-9590
Tube Elbow

145729590
EW06ZLCF: RNCC: 3 | RNVC: 2
437393: RNCC: 5 | RNVC: 2

30 Aug 2012

4730-14-413-9142
Fluid Pressure Line Multiple Connector

144139142
P4ES109-57TF: RNCC: 3 | RNVC: 2

22 Jan 1987

4730-14-226-0166
Tube To Boss Straight Adapter

142260166
NO PRIMARY REF14-226-0166: RNCC: 3 | RNVC: 2
20428: RNCC: 5 | RNVC: 9
85-514-3981: RNCC: 6 | RNVC: 9

1 Jan 1966

4730-14-211-3663
Bouchon Dobturation

142113663
D2604-2-126: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-298-6361
Quick Disconnect Coupling Half

142986361
NO PRIMARY REF14-298-6361: RNCC: 3 | RNVC: 2
0685-02: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-364-0975
Tube To Boss Straight Adapter

143640975
366A52-1066-21: RNCC: 3 | RNVC: 2

7 Aug 1980

4730-14-301-7949
Tube To Boss Straight Adapter

143017949
NO PRIMARY REF14-301-7949: RNCC: 3 | RNVC: 2
B4C361472REP4H6D6C: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-340-6358
Fluid Pressure Line Multiple Connector

143406358
9118309166: RNCC: 3 | RNVC: 2
CA21R30-33-200: RNCC: 5 | RNVC: 9

14 Feb 1977

4730-14-436-7662
Adaptation Manchon

144367662
MY20721-4112-11: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-331-1599
Jeu Demi-Manchonsor

143311599
E25.06: RNCC: 3 | RNVC: 2
E25-06: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-333-5145
Barillet A 5 Voies

143335145
GSM163-006BF17: RNCC: 3 | RNVC: 2
GSM163-06BF17: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-524-4414
Quick Disconnect Coupling Half

145244414
RBE11-7813/IC/JS3: RNCC: 3 | RNVC: 2
91711679: RNCC: 5 | RNVC: 2

20 Mar 2001

4730-14-410-7730
Quick Disconnect Coupling Half

144107730
RBE06-6809/IA/9: RNCC: 3 | RNVC: 2
RBE6-6809IA9: RNCC: 5 | RNVC: 2

9 Jul 1986

4730-14-459-4540
Fluid Passage Bolt

144594540
MAT103-01-01: RNCC: 3 | RNVC: 2

1 Dec 1992

4730-14-260-2006
Tube To Boss Straight Adapter

142602006
702A30-0800-20: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-291-1115
Tube To Boss Straight Adapter

142911115
D1010-682: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-485-6868
Pipe Flange

144856868
438406: RNCC: 3 | RNVC: 2
438406-001: RNCC: 5 | RNVC: 9

6 Feb 1997

4730-14-428-5860
Equipe Adaptateur

144285860
SBE1114: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-399-1362
Raccord Hydrau Bloc

143991362
617360: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-453-9482
Tube To Hose Straight Adapter

144539482
LN324-100-08-008DN100: RNCC: 3 | RNVC: 2
RAB9500: RNCC: 5 | RNVC: 2

17 Mar 1992

4730-14-461-1987
Lubricant Pressure Relief Fitting

144611987
M8X125TARE20-30G: RNCC: 3 | RNVC: 2

2 Mar 1993

4730-14-381-4262
Tube-Hose Fitting Compression Sleeve

143814262
NO PRIMARY REF14-381-4262: RNCC: 3 | RNVC: 2
00023239: RNCC: 5 | RNVC: 9
0023239: RNCC: 5 | RNVC: 9

25 Jan 1983

4730-14-356-7332
Tube To Boss Straight Adapter

143567332
3160S94-43-080: RNCC: 3 | RNVC: 2
85-689-8250: RNCC: 6 | RNVC: 9

15 May 1979

4730-14-521-9522
Flared Tube Fitting Conical Seal

145219522
NSA835070-5C: RNCC: 3 | RNVC: 2

27 Sep 2000

4730-14-558-8769
Tube-Hose Adapter Body

145588769
360A62-1156-00: RNCC: 3 | RNVC: 2

18 Nov 2008

4730-14-377-4225
Raccord De Purge

143774225
9970-143-563: RNCC: 3 | RNVC: 2
85-691-0620: RNCC: 6 | RNVC: 9

17 May 1982

4730-14-404-8862
Flange To Hose Elbow

144048862
366A72-1065-00: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-415-4855
Tube To Boss Straight Adapter

144154855
1DM40-40-49CYLNU: RNCC: 3 | RNVC: 2
AA40X40-49NNU: RNCC: 3 | RNVC: 2

18 May 1987

4730-14-573-1512
Hose Clamp

145731512
678000060B: RNCC: 3 | RNVC: 2
SPP4510073: RNCC: 5 | RNVC: 2

19 Sep 2012

4730-14-238-7377

4730-14-575-7780
Flange To Tube Elbow

145757780
M2811350100100: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-334-5017

4730-14-572-3555
Flange To Tube To Hose Tee

145723555
M2821304000000: RNCC: 3 | RNVC: 2

27 Jun 2012

4730-14-297-7540
Coude Raccord Spe

142977540
R30125SMBREP9: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-226-6179

4730-14-214-1947

4730-14-503-1767
Bulkhead Hose Connector

145031767
RA1M534304220: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-332-8941
Tube Fitting Clinch Sleeve

143328941
105-10P: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-516-8262
Bulkhead Hose Connector

145168262
SEM011550211001: RNCC: 3 | RNVC: 2

20 Oct 1999

4730-14-504-5340
Fluid Passage Bolt

145045340
3218R013: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-524-5859
Valve Adapter Assembly

145245859
24679701: RNCC: 3 | RNVC: 2
SYB2271: RNCC: 5 | RNVC: 2

28 Mar 2001

4730-14-349-3339
Tube Tee

143493339
31031417: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-545-3364
Quick Disconnect Coupling Half

145453364
4047: RNCC: 3 | RNVC: 2

5 Apr 2005

4730-14-528-1662
Fluid Flow Restrictor

145281662
76044020700: RNCC: 3 | RNVC: 2

9 Jan 2002

4730-14-031-5374
Tube Fitting Brazing Ferrule

140315374
351016: RNCC: 3 | RNVC: 2
0000351016: RNCC: 5 | RNVC: 2
351016: RNCC: 5 | RNVC: 9

14 Jun 1980

4730-14-504-2416
Tube-Pipe Fitting Kit

145042416
3595205M1: RNCC: 3 | RNVC: 2

11 Feb 1998

4730-14-429-3712
Fluid Passage Bolt

144293712
755-2184: RNCC: 3 | RNVC: 2

18 Jan 1989

4730-14-569-2948
Sediment Strainer Element

145692948
NO PRIMARY REF 14-569-2948: RNCC: 3 | RNVC: 2
TAMIS 200 MICRON 20AX002 DN25: RNCC: 5 | RNVC: 2

1 Sep 2011

4730-14-556-5252
Pipe Flange

145565252
2A 2 E EF 558300 001 5/5 DN51: RNCC: 3 | RNVC: 2

18 Mar 2008

4730-14-349-4690
Tube To Boss Straight Adapter

143494690
1851-1-6500: RNCC: 3 | RNVC: 2
1851-1-6500: RNCC: 5 | RNVC: 9

22 May 1978

4730-14-397-0625

4730-14-342-6001

4730-14-561-5783
Tube To Boss Elbow

145615783
048508007: RNCC: 3 | RNVC: 2
048508007: RNCC: 3 | RNVC: 2
FS0001842: RNCC: 6 | RNVC: 9

29 Jul 2009

4730-14-462-1550
Quick Disconnect Coupling Half

144621550
23MEPK324500005PL1TYPEA-REP6: RNCC: 3 | RNVC: 2
CMT30E9047PL1TYPEA-REP6-UE12: RNCC: 5 | RNVC: 2

7 Apr 1993

4730-14-279-0561

4730-14-365-9413

4730-14-330-3350
Tube To Boss Straight Adapter

143303350
12-20-8-13C0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-334-2513
Tube Tee

143342513
GSM163-017F10: RNCC: 3 | RNVC: 2
GSM163-17F10: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-484-9849
Tape

144849849
GSM088-001F27: RNCC: 3 | RNVC: 2

17 Dec 1996

4730-14-387-5854
Pipe Joint Welding Ring

143875854
F0URREAU43-6IN0X: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-334-2528
Tube Tee

143342528
GSM163-017F26: RNCC: 3 | RNVC: 2
GSM163-17F26: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-430-2150
Bulkhead Hose Connector

144302150
0176-01-04-01: RNCC: 3 | RNVC: 2

8 Mar 1989

4730-14-537-3682
Tourn Raccord Corps

145373682
359-5510: RNCC: 3 | RNVC: 2

27 Oct 2003

4730-14-213-8294

4730-14-562-5411
Tube To Boss Tee

145625411
3198 06 10: RNCC: 3 | RNVC: 2
FS0002399: RNCC: 6 | RNVC: 9

3 Nov 2009

4730-14-404-3053
Tube To Boss Straight Adapter

144043053
M5DM6-10X100: RNCC: 3 | RNVC: 2

24 Sep 1985

4730-14-458-3840
Tube Union

144583840
12-1821M10SS: RNCC: 3 | RNVC: 9
URSI12-10: RNCC: 5 | RNVC: 2

22 Oct 1992

4730-14-293-1818

4730-14-297-8987
Bloc De Derivation

142978987
411MA0162FB12: RNCC: 3 | RNVC: 2
411MA162FB12: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-367-3380

4730-14-430-3942
Sediment Strainer Element

144303942
M23404: RNCC: 3 | RNVC: 9

20 Mar 1989

4730-14-508-0425
Tube Tee

145080425
1911060169: RNCC: 3 | RNVC: 2
61-22-12-22: RNCC: 5 | RNVC: 9

26 Aug 1998

4730-14-393-6172
Tube Fitting Brazing Ferrule

143936172
10921A23: RNCC: 3 | RNVC: 9

7 Jun 1984

4730-14-436-8777
Tube Coupling

144368777
RSM37947F21REP42: RNCC: 3 | RNVC: 2

8 Jan 1990

4730-14-307-7035
Tube Fitting Brazing Ferrule

143077035
9419991030: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-560-8779
Lubrication Fitting

145608779
A005260: RNCC: 3 | RNVC: 2

28 May 2009

4730-14-323-7821

4730-14-420-1947
Tube Tee

144201947
LL367-DK1004S: RNCC: 3 | RNVC: 2
Q1590910DS1/4BSPKNU: RNCC: 3 | RNVC: 2
8984101366NU: RNCC: 5 | RNVC: 2

24 Nov 1987

4730-14-406-9750
Swivel Retaining Pipe Flange

144069750
214-16: RNCC: 3 | RNVC: 2
H37377-60: RNCC: 3 | RNVC: 2

22 Jan 1986

4730-14-393-8633
Tube To Boss Straight Adapter

143938633
NO PRIMARY REF14-393-8633: RNCC: 3 | RNVC: 2
980307: RNCC: 5 | RNVC: 9

23 Jun 1984

4730-14-396-3236
Raccord Compose

143963236
4.7522.09: RNCC: 3 | RNVC: 9
4752209: RNCC: 5 | RNVC: 9
4-7522-09: RNCC: 5 | RNVC: 9

27 Nov 1984

4730-14-326-5341
Tube Tee

143265341
17-7-6602: RNCC: 3 | RNVC: 2
175-71-228: RNCC: 3 | RNVC: 2
85-693-5416: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-522-5476

4730-14-330-6505
Tube To Boss Straight Adapter

143306505
CR0Q28MASMT2-20: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-307-7196
Quick Disconnect Coupling Assembly

143077196
K05A32-601K06A32-601: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-509-1566
Tube To Boss Straight Adapter

145091566
KQH16-U04: RNCC: 3 | RNVC: 2
ND1432: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-440-1211
Bride A Zinc

144401211
MAT162-0114F4: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-363-5410

4730-14-253-7898
Tube Preforme De 25

142537898
B078CBDBRANGEE19: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-279-1480
Coude Pour Tube Equ

142791480
45-09L10-12-17C0: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-300-7534
Tube Tee

143007534
GSM523-026F53: RNCC: 3 | RNVC: 2
411MA127FB18: RNCC: 5 | RNVC: 2
GSM523-26F53: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-393-9163
Demi-Ra Embout Male

143939163
434-30: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-536-8641
Straight Tubing Connector

145368641
AVP03611-01-130120: RNCC: 3 | RNVC: 2

17 Sep 2003

4730-14-424-2390
Tube Coupling

144242390
22A16-14X150SPLUSPPV: RNCC: 3 | RNVC: 2
91610738: RNCC: 5 | RNVC: 2
5005030708: RNCC: 5 | RNVC: 2

19 May 1988

4730-14-376-3007
Tube To Boss Straight Adapter

143763007
UMCI12X12-17N: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-503-9291
Creux Boulon

4730-14-509-3986

4730-14-390-5037
Tube Union

143905037
F5BXS10-9-16: RNCC: 3 | RNVC: 2
F5BXS10-9-16: RNCC: 5 | RNVC: 2

26 Jan 1984

4730-14-343-9237
Quick Disconnect Coupling Assembly

143439237
BN314-503F3-7: RNCC: 3 | RNVC: 2

13 Jul 1977

4730-14-249-2084
Raccord Special

142492084
39164: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-263-0897
Passage De Cloison

142630897
PCB10: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-299-9972

4730-14-290-1704

4730-14-262-1566
Pipe Flange

142621566
7062DJ1F1F57-5XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-501-2345
Tube To Boss Straight Adapter

145012345
471-019: RNCC: 3 | RNVC: 2
471.019: RNCC: 3 | RNVC: 2
F300 0T 025 2750: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-032-3869
Electrical Conduit Union

140323869
1207-16-15-21: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-321-5800

4730-14-442-5235
Quick Disconnect Coupling Half

144425235
K0662-6-8,0: RNCC: 3 | RNVC: 2

17 Oct 1990

4730-14-400-7618
Fluid Passage Bolt

144007618
200066-0: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-466-3671
Swivel Flange To Hose Straight Adapter

144663671
C25057000-1: RNCC: 3 | RNVC: 2

3 Nov 1993

4730-14-379-8621
Deflecteur Sur Filt

143798621
56458-1: RNCC: 3 | RNVC: 2

20 Oct 1982

4730-14-443-4641
Pipeline Flexible Spacer

144434641
2-544780-6: RNCC: 3 | RNVC: 2
2-544780-6: RNCC: 5 | RNVC: 9

23 Nov 1990

4730-14-423-7316
Buse Profilee

144237316
002422650A: RNCC: 3 | RNVC: 2
8460-109: RNCC: 3 | RNVC: 2

28 Apr 1988

4730-14-564-6797
Tube To Boss Straight Adapter

145646797
34620562: RNCC: 3 | RNVC: 2
RV6E083E08BCLE: RNCC: 5 | RNVC: 2

25 May 2010

4730-14-566-0319
Quick-Disconnect Nipple

145660319
91178: RNCC: 3 | RNVC: 2
438034: RNCC: 5 | RNVC: 2

13 Oct 2010

4730-14-255-1222
Bouchon Filete

142551222
E00487-18: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-262-1589
Pipe Flange

142621589
7062DJ1F1F41-5-3-5-14CD2-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-340-0885
Tube To Boss Straight Adapter

143400885
8-6-8XG1-4ACIER: RNCC: 3 | RNVC: 2
8-6-8XG1-4ACIER: RNCC: 3 | RNVC: 2

18 Jan 1977

4730-14-462-7095
Tube To Hose Straight Adapter

144627095
F3BMB8-1/4: RNCC: 3 | RNVC: 2
F3BMB8-1/4: RNCC: 3 | RNVC: 9
F3BMB8-1-4: RNCC: 5 | RNVC: 9

28 Apr 1993

4730-14-300-4986
Hose Coupling Assembly

143004986
TAH1136-8: RNCC: 3 | RNVC: 2
TAH1136-8: RNCC: 5 | RNVC: 9
85-663-0070: RNCC: 6 | RNVC: 9

1 Jan 1973

4730-14-550-8033
Quick Disconnect Coupling Assembly

145508033
HCB05.2101/IC/JV/9/KN/BM: RNCC: 3 | RNVC: 2

18 Jul 2006

4730-14-426-7679
Tube Tee

144267679
4730HEING042,4X2,6-26,9X2: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-401-3189
Quick Disconnect Coupling Half

144013189
RBE08-1101-0DLKV4-5: RNCC: 3 | RNVC: 2

5 Jun 1985

4730-14-553-8178
Fluid Pressure Line Multiple Connector

145538178
E18485: RNCC: 3 | RNVC: 2

22 May 2007

4730-14-516-4483
Tube To Gas Fitting Straight Adapter

145164483
200665: RNCC: 3 | RNVC: 2

24 Sep 1999

4730-14-464-5900
Quick Disconnect Coupling Half

144645900
2292102000: RNCC: 3 | RNVC: 2
2292102000: RNCC: 5 | RNVC: 9
F300 0T 023 2339: RNCC: 6 | RNVC: 9

11 Aug 1993

4730-14-528-9158
Tube Coupling

145289158
8931293882: RNCC: 3 | RNVC: 2

22 Feb 2002

4730-14-331-6612
Tube To Boss Straight Adapter

143316612
190144: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-388-9305
Tube Coupling

143889305
39086023: RNCC: 3 | RNVC: 2
39086023: RNCC: 5 | RNVC: 9
39086023: RNCC: 5 | RNVC: 9

29 Nov 1983

4730-14-344-1040

4730-14-367-7276

4730-14-372-0403

4730-14-042-8385
Tube Tee

140428385
31A8: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-277-4411
Fluid Pressure Line Multiple Connector

142774411
127-18E2: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-450-8059
Tube To Boss Straight Adapter

144508059
262-20-78116-03: RNCC: 3 | RNVC: 2

23 Oct 1991

4730-14-275-6960
Lubrication Fitting

142756960
5002019: RNCC: 3 | RNVC: 2
G25-12-150: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-324-1269
Tube To Boss Straight Adapter

143241269
ESQ1-52-74TF: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-425-1835
Pipe Flange

144251835
BN324-583F3DN80: RNCC: 2 | RNVC: 2

24 Jun 1988

4730-14-385-7915
Tube To Boss Straight Adapter

143857915
01010613: RNCC: 3 | RNVC: 2
439-666: RNCC: 5 | RNVC: 2
101-0613: RNCC: 5 | RNVC: 9

26 Jul 1983

4730-14-489-8519
Quick Disconnect Coupling Half

144898519
GD 18536 38: RNCC: 3 | RNVC: 2
GD18536-38: RNCC: 5 | RNVC: 2

27 Aug 1997

4730-14-470-0341
Fluid Flow Restrictor

144700341
384030-Z2CN18-10: RNCC: 3 | RNVC: 2

25 May 1994

4730-14-403-0380
Quick Disconnect Coupling Half

144030380
RBE08-71020D3: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-442-8141
Tube Tee

144428141
01452121: RNCC: 3 | RNVC: 2
439-717: RNCC: 5 | RNVC: 2

6 Nov 1990

4730-14-512-8368
Tube Coupling

145128368
214112: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-313-2591
Fluid Passage Bolt

143132591
0243897480: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-356-2190
Fluid Pressure Line Multiple Connector

143562190
70120034: RNCC: 3 | RNVC: 2
70120034: RNCC: 5 | RNVC: 9

25 Apr 1979

4730-14-537-0438
Special-Shaped Hose Clamp

145370438
CFCD1 15 28 W1: RNCC: 3 | RNVC: 2

24 Sep 2003

4730-14-326-9952
Tube To Boss Straight Adapter

143269952
BA12070: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-479-1835
Tube Fitting Socket Welded Ferrule

144791835
FI 4.31.85.01: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-426-7866
Tube Tee

144267866
4730HEING114,3X5,6-48,3X2,6: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-418-4683
Tube Tee

144184683
4-455103: RNCC: 3 | RNVC: 9
4-455103: RNCC: 5 | RNVC: 2
4-455103: RNCC: 5 | RNVC: 9

26 Aug 1987

4730-14-548-2713
Tube To Boss Straight Adapter

145482713
TT4XS12-1/4: RNCC: 3 | RNVC: 2
8TT4MXS: RNCC: 3 | RNVC: 2

21 Dec 2005

4730-14-433-3768
Tube Fitting Brazing Ferrule

144333768
DLT024903: RNCC: 3 | RNVC: 2
RAR1433: RNCC: 5 | RNVC: 2
DLT565189BREP13BFOLIO12-1/6: RNCC: 5 | RNVC: 2

24 Jul 1989

4730-14-415-1985
Tube Tee

144151985
4730HEEG033,7X3,2: RNCC: 2 | RNVC: 2
U1238F12DE33,7X3,2: RNCC: 5 | RNVC: 2

17 Apr 1987

4730-14-544-9383
Fluid Pressure Line Multiple Connector

145449383
1503 3145 00: RNCC: 3 | RNVC: 2

7 Mar 2005

4730-14-496-3427
Tube To Boss Straight Adapter

144963427
167924: RNCC: 3 | RNVC: 2
F300 0T 021 4162: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-571-5028
Tube Coupling Nut

145715028
5001858421: RNCC: 1 | RNVC: 2
5840.333.110: RNCC: 3 | RNVC: 2

30 Mar 2012

4730-14-361-0163
Bloc De Raccordemen

143610163
B0234-001F4: RNCC: 3 | RNVC: 2

19 Dec 1979

4730-14-562-8629
Pipe Tee

145628629
PE20103-060406: RNCC: 3 | RNVC: 2

30 Nov 2009

4730-14-511-0364
Flange To Hose Elbow

145110364
2K20-090: RNCC: 3 | RNVC: 2

27 Nov 1998

4730-14-320-7308
Tube To Boss Straight Adapter

143207308
A580-064: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-465-7405
Ens. Raccord Amont

144657405
MAT146-01-00: RNCC: 3 | RNVC: 2

14 Oct 1993

4730-14-391-3518
Quick Disconnect Coupling Half

143913518
SH4-62: RNCC: 3 | RNVC: 2
SH4-62: RNCC: 3 | RNVC: 2

1 Mar 1984

4730-14-457-8031
Pipe Flange

144578031
4730JADN250-11D1S: RNCC: 2 | RNVC: 2

24 Sep 1992

4730-14-346-0623
Tube To Boss Straight Adapter

143460623
58360: RNCC: 3 | RNVC: 2
58-360: RNCC: 5 | RNVC: 2
58360: RNCC: 5 | RNVC: 2

5 Nov 1977

4730-14-300-4960
Hose Coupling Assembly

143004960
9920013: RNCC: 3 | RNVC: 2
9952332A: RNCC: 3 | RNVC: 2
9952332: RNCC: 5 | RNVC: 2
9-92-00-13: RNCC: 5 | RNVC: 9
9-95-23-32A: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-297-0424
Fluid Pressure Line Multiple Connector

142970424
121B77-100-40-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-568-0218
Hose Coupling

145680218
M82100059-3: RNCC: 3 | RNVC: 2

3 May 2011

4730-14-504-9070
Pipeline Flexible Spacer

145049070
DILATOFLEX-K-CC-DN20PN16: RNCC: 3 | RNVC: 2
A1/20/KG310-WG/E/PN16: RNCC: 3 | RNVC: 2
ERV-DOUBLEROUGE-DN20PN16: RNCC: 3 | RNVC: 9

11 Mar 1998

4730-14-438-3855
Tube Coupling

144383855
4730HL-3DE10,3: RNCC: 2 | RNVC: 2
Y07134-01-0000P003DE10,2: RNCC: 3 | RNVC: 2

19 Mar 1990

4730-14-557-0824
Tube To Hose Straight Adapter

145570824
D2018-047-F8: RNCC: 3 | RNVC: 2

6 May 2008

4730-14-328-5581
Bride Speciale

143285581
M10-66-76-1: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-505-3359
Tube Union

145053359
GE28-PLM-ED-0MD: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-343-9241

4730-14-256-5482

4730-14-278-0929

4730-14-514-6302
Grooved Clamp Connecting Coupling Half

145146302
9522002260: RNCC: 3 | RNVC: 2

3 Jun 1999

4730-14-423-9551
Tube To Boss Straight Adapter

144239551
006825228P: RNCC: 3 | RNVC: 2

5 May 1988

4730-14-515-4422
Tube To Boss Straight Adapter

145154422
MJ916MJ916MJ916MJ916: RNCC: 3 | RNVC: 2
SOAMJ916MJ916MJ916MJ916: RNCC: 5 | RNVC: 9

13 Jul 1999

4730-14-290-9517

4730-14-263-6334

4730-14-562-0031
Tube To Boss Tee

145620031
ET10LMEDOMDCF: RNCC: 3 | RNVC: 2
ET10LMEDOMDCF: RNCC: 5 | RNVC: 9

23 Sep 2009

4730-14-287-5717

4730-14-390-1760

4730-14-418-2311
Ens Coude 30Deg

144182311
8001175: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-277-5404

4730-14-337-0883

4730-14-225-6173

4730-14-218-1194
Raccord Special

142181194
613-508-002-0: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-494-6990
Tube To Boss Straight Adapter

144946990
NO PRIMARY REF14-494-6990: RNCC: 3 | RNVC: 2
0171129: RNCC: 5 | RNVC: 9
F300 0T 017 7981: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-471-6049
Quick-Disconnect Nipple

144716049
312-10521-001: RNCC: 3 | RNVC: 2

7 Sep 1994

4730-14-043-1965
Tube To Boss Straight Adapter

140431965
365A54-1036-00: RNCC: 3 | RNVC: 2
365A54.1036.00: RNCC: 5 | RNVC: 2

10 Apr 1984

4730-14-362-1138
Tube Tee

143621138
GSM164-025F35: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-423-4360
Pipe Flange

144234360
UA50088006PN250-11C1DN65: RNCC: 2 | RNVC: 2
4730HCPN250DN06511C1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-209-1743
Tube To Boss Swivel Joint

142091743
3130-51-20-011: RNCC: 3 | RNVC: 2
85-691-1332: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-287-3902
Tube To Boss Straight Adapter

142873902
NO PRIMARY REF14-287-3902: RNCC: 3 | RNVC: 2
27247: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-276-2039
Tube Fitting Brazing Ferrule

142762039
6784-1DB38-20: RNCC: 2 | RNVC: 2
MEC11387: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-041-1885
Tube Coupling

140411885
N410-91: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-345-6263
Tube Tee

143456263
Q1-5TR20X10X20: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-420-0851
Tube Tee

144200851
LW305-CP302530N: RNCC: 3 | RNVC: 2
TRA30X25X30N: RNCC: 5 | RNVC: 2

18 Nov 1987

4730-14-305-4175
Raccord Droit Equip

143054175
3605-16D: RNCC: 3 | RNVC: 2
3605-16D: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-324-0891
Raccord Coude

143240891
A0182-066F16: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-528-3099
Exhaust-Intake Pneumatic Muffler

145283099
J00850-07-1000P080: RNCC: 3 | RNVC: 2

18 Jan 2002

4730-14-411-0151
Contre-Bride

144110151
E64-35-3200-122BF11-22ETF12-22DN: RNCC: 3 | RNVC: 2

29 Jul 1986

4730-14-521-1683
Pipe Flange

145211683
0014853: RNCC: 3 | RNVC: 2

12 Jul 2000

4730-14-502-2266
Ensemble Raccord

145022266
BB060100: RNCC: 3 | RNVC: 2

26 Nov 1997

4730-14-378-0330
Tube Tee

143780330
32543779: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-434-9008
Flange To Hose Straight Adapter

144349008
BN324575BF5DN40: RNCC: 3 | RNVC: 2
RAR1435: RNCC: 5 | RNVC: 2

9 Oct 1989

4730-14-512-7712
Tube Coupling

145127712
800039443: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-367-7982

4730-14-250-2031

4730-14-500-4800
Tube To Boss Straight Adapter

145004800
L583143: RNCC: 3 | RNVC: 2
DBAL583143: RNCC: 5 | RNVC: 9
F300 0T 024 4970: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-294-0691
Tube To Boss Straight Adapter

142940691
13-301-60: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-321-4496

4730-14-438-5202
Hose Coupling Assembly

144385202
DA2C729003500: RNCC: 3 | RNVC: 2

21 Mar 1990

4730-14-398-6397
Pipe Flange

143986397
CMT30E9053DN20D30: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-041-2478
Bulkhead Hose Connector

140412478
N410-17: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-225-0755
Raccord Droit De Bo

142250755
NO PRIMARY REF14-225-0755: RNCC: 3 | RNVC: 2
Z12666: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-432-4724
Pipe Flange

144324724
BN329-506D2DN200: RNCC: 3 | RNVC: 2

14 Jun 1989

4730-14-562-9116
Pipe Bushing

145629116
01691017: RNCC: 3 | RNVC: 2

3 Dec 2009

4730-14-496-3105
Tube To Boss Straight Adapter

144963105
103036490000: RNCC: 3 | RNVC: 2
1030-36-49-49REDUIT: RNCC: 5 | RNVC: 9
F300 0T 021 3784: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-448-9843

4730-14-450-4096

4730-14-365-9343

4730-14-492-2776
Union

144922776
0024248723: RNCC: 3 | RNVC: 2
F300 0T 007 2904: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-273-5328

4730-14-217-5384

4730-14-432-2540
Tube Repair Plug

144322540
SIP541RR00107A: RNCC: 3 | RNVC: 2
NCHX01H013DF5REP6TAMPON: RNCC: 5 | RNVC: 2
NCHX01H013EF5REP6TAMPON: RNCC: 5 | RNVC: 2

31 May 1989

4730-14-254-7130
Pipe Expansion Joint

142547130
DILAT0FLEX175EAUDEMER8X22X270: RNCC: 3 | RNVC: 9

1 Jan 1969

4730-14-448-7174
Swivel Flange To Hose Connector

144487174
3ET59812: RNCC: 3 | RNVC: 2

8 Jul 1991

4730-14-417-7728
Tube To Boss Straight Adapter

144177728
Q15GE8SM12100: RNCC: 3 | RNVC: 2
8901086566NU: RNCC: 3 | RNVC: 2

22 Jul 1987

4730-14-508-8769
Straight Tubing Connector

145088769
RD8: RNCC: 3 | RNVC: 2
270150060: RNCC: 5 | RNVC: 2

5 Oct 1998

4730-14-494-4918
Pipe Flange

144944918
T55 431 20: RNCC: 3 | RNVC: 2
F300 0T 017 3973: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-420-8908
Fluid Pressure Line Multiple Connector

144208908
421189: RNCC: 3 | RNVC: 9

23 Dec 1987

4730-14-493-4781
Quick-Disconnect Nipple

144934781
036706V: RNCC: 3 | RNVC: 2
F300 0T 013 1974: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-519-7336
Tube Coupling

145197336
21062: RNCC: 3 | RNVC: 2

4 Apr 2000

4730-14-450-4390
Pipe Flange

144504390
4730HADN010: RNCC: 2 | RNVC: 2

9 Oct 1991

4730-14-339-1729
Fluid Pressure Line Multiple Connector

143391729
0076167010: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-494-5513
Tube To Boss Straight Adapter

144945513
643 449 102: RNCC: 3 | RNVC: 2
F300 0T 017 4692: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-433-2272
Tube To Boss Straight Adapter

144332272
GE15LMEDA3K: RNCC: 3 | RNVC: 2
GE15LMEDA3C: RNCC: 3 | RNVC: 2
GE15LMEDA3C: RNCC: 3 | RNVC: 9
GE15PLMEDA3C: RNCC: 5 | RNVC: 2
426270: RNCC: 5 | RNVC: 2
GE15PLMEDA3C: RNCC: 5 | RNVC: 9

18 Jul 1989

4730-14-442-4577
Hose To Boss Straight Adapter

144424577
JWAT124: RNCC: 3 | RNVC: 2

17 Oct 1990

4730-14-367-7953
Quick Disconnect Coupling Half

143677953
S2293CD: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-382-8735
Tube To Boss Straight Adapter

143828735
PE60829H06: RNCC: 3 | RNVC: 2

26 Jul 2000

4730-14-365-3020

4730-14-263-1975
Raccord Droit

142631975
NO PRIMARY REF14-263-1975: RNCC: 3 | RNVC: 2
418157: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-413-9136
Tube To Boss Straight Adapter

144139136
P4-12-14-18X150NU: RNCC: 3 | RNVC: 2

22 Jan 1987

4730-14-501-2162
Tube To Boss Straight Adapter

145012162
420-007: RNCC: 3 | RNVC: 2
420.007: RNCC: 3 | RNVC: 2
F300 0T 025 2567: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-253-2942
Raccord Sur Pompe

142532942
NO PRIMARY REF14-253-2942: RNCC: 3 | RNVC: 2
329124: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-040-4036
Tube Tee

140404036
R6X8LX6: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-423-7458
Tube To Boss Straight Adapter

144237458
0319401620: RNCC: 3 | RNVC: 2

28 Apr 1988

4730-14-212-1476
Tube Coupling Assembly

142121476
0-3901SB32A: RNCC: 3 | RNVC: 2
0-3901SB32A: RNCC: 5 | RNVC: 9
85-691-3823: RNCC: 6 | RNVC: 9

5 Jul 1980

4730-14-305-0093
Tube To Boss Straight Adapter

143050093
9101066066: RNCC: 3 | RNVC: 2
CA1-6-10-100: RNCC: 5 | RNVC: 9
CA1-6-10X100: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-541-3663
Hose To Boss Straight Adapter

145413663
15.215-4-4: RNCC: 3 | RNVC: 2

3 Jun 2004

4730-14-457-8919
Tube Tee

144578919
4730JCEG026,9X03,6: RNCC: 2 | RNVC: 2

26 Sep 1992

4730-14-475-7881
Tube To Boss Straight Adapter

144757881
GBRAB6-1-4: RNCC: 3 | RNVC: 2
322412: RNCC: 5 | RNVC: 2
GBRAB6-1-4: RNCC: 5 | RNVC: 2

3 May 1995

4730-14-256-0565
Raccord Vabco

142560565
UFB10-3-8CYUA9M2: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-373-8196
Entonoir De Javelis

143738196
BN320-559F4/5: RNCC: 3 | RNVC: 2

13 Nov 1981

4730-14-525-0775
Quick Disconnect Coupling Half

145250775
RBE06-6102-4-5: RNCC: 3 | RNVC: 2

18 May 2001

4730-14-209-1224
Raccordsouple Equi

142091224
AF8-60-2X: RNCC: 3 | RNVC: 2
HBT90DN8: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-505-1746
Fluid Pressure Line Multiple Connector

145051746
1977D19-02: RNCC: 3 | RNVC: 2

11 Mar 1998

4730-14-203-2202

4730-14-389-3830

4730-14-558-1746
Fluid Passage Bolt

145581746
LX1289F00: RNCC: 3 | RNVC: 2

9 Sep 2008

4730-14-309-1267

4730-14-217-3593
Raccord Coude Speci

142173593
205029: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-231-3651

4730-14-562-1809
Tube Nipple

145621809
3106 12 00: RNCC: 3 | RNVC: 2
FS0002453: RNCC: 6 | RNVC: 9

6 Oct 2009

4730-14-303-7846

4730-14-343-0910
Coude Pour Tube

4730-14-462-0821
Tube Union

144620821
Z80002080: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-362-0867

4730-14-495-5304
Tube To Boss Straight Adapter

144955304
NO PRIMARY REF14-495-5304: RNCC: 3 | RNVC: 2
057 110 50: RNCC: 5 | RNVC: 9
F300 0T 019 4307: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-032-1567
Contre Bride

140321567
CMT30E9030AF3ET3BISDE88-9REP4: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-405-0487

4730-14-506-8707
Tuyau Collier

4730-14-556-4953
Tube Coupling

145564953
OA3745: RNCC: 3 | RNVC: 2

13 Mar 2008

4730-14-224-9985

4730-14-365-9784

4730-14-562-5388
Tube To Boss Elbow

145625388
3169 10 21: RNCC: 3 | RNVC: 2
FS0002390: RNCC: 6 | RNVC: 9

3 Nov 2009

Load More Results