What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 128 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 128 of 185

4730-14-247-3099

4730-14-251-4389

4730-14-239-6325

4730-14-217-2860
Embout A Souder

142172860
S2166: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-451-5918
Tube To Gas Fitting Straight Adapter

144515918
UFSI8-1/4: RNCC: 3 | RNVC: 9
CAE01333: RNCC: 5 | RNVC: 2

25 Nov 1991

4730-14-408-7232
Tube Tee

144087232
RTXS25-1: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-424-9709
Tube Tee

144249709
T25SA3C: RNCC: 3 | RNVC: 2
T25SA3C: RNCC: 3 | RNVC: 9
T25PS: RNCC: 5 | RNVC: 9

16 Jun 1988

4730-14-306-8599

4730-14-260-9327

4730-14-297-6790

4730-14-268-1170
Pipe Flange

142681170
6784-1CH14-8: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-256-8660
Fluid Pressure Line Multiple Connector

142568660
2-140050-2: RNCC: 3 | RNVC: 2
2-140050-2: RNCC: 5 | RNVC: 9
140050: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-283-1076
Tube To Boss Straight Adapter

142831076
52-14 3-8BGS: RNCC: 3 | RNVC: 2
UML14X3-8BGSN: RNCC: 3 | RNVC: 2
4L14 3-8BGS: RNCC: 3 | RNVC: 2
ML14-6B: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-387-8484
Tube Tee

143878484
NO PRIMARY REF14-387-8484: RNCC: 3 | RNVC: 2
0026-114DN40: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-268-8726
Tube Tee

142688726
631X6120: RNCC: 3 | RNVC: 2
TR2-12128-631: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-404-2906
Quick Disconnect Coupling Half

144042906
CROQ3-85ABECNMACHN: RNCC: 3 | RNVC: 2

18 Sep 1985

4730-14-316-8568
Tube To Boss Straight Adapter

143168568
721-0188: RNCC: 3 | RNVC: 2
A24013: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-325-8972
Tube Coupling

143258972
34-20X27-22: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-249-0518
Bouchon Guide

142490518
1-039-583: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-408-4409
Tube Tee

144084409
4730AJ4.1DN30NU: RNCC: 2 | RNVC: 2
MEC10828: RNCC: 3 | RNVC: 2
Q15T30SNU: RNCC: 3 | RNVC: 2
8404300066NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-261-8516
Pipe Flange

142618516
RUHB7-40-30: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-248-9492
Tube To Boss Straight Adapter

142489492
NO PRIMARY REF14-248-9492: RNCC: 3 | RNVC: 2
08017S49: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-473-7143
Tube Union

144737143
FLEX1L114,3PN16EPDM/INOX: RNCC: 3 | RNVC: 2
STRAUB-FLEXL114,3EPDM/INOX: RNCC: 5 | RNVC: 2
190 1141: RNCC: 5 | RNVC: 9

10 Jan 1995

4730-14-536-1458
Tube Tee

145361458
4524-0037: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-511-6862
Equerre Femelle

145116862
U1778-N46-16-162: RNCC: 3 | RNVC: 2
N46-16-162: RNCC: 5 | RNVC: 2

11 Jan 1999

4730-14-417-7716
Tube To Boss Straight Adapter

144177716
Q15GE16S3/8BSPNU: RNCC: 3 | RNVC: 2
8401161766NU: RNCC: 3 | RNVC: 2

22 Jul 1987

4730-14-507-3592
Tube Coupling

145073592
NO PRIMARY REF14-507-3592: RNCC: 3 | RNVC: 2
342 4370: RNCC: 5 | RNVC: 9

1 Jul 1998

4730-14-371-9815
Tube Tee

143719815
330A-39-9822-20: RNCC: 3 | RNVC: 2
330A39-9822-20: RNCC: 5 | RNVC: 2

5 Aug 1981

4730-14-380-3302
Tube To Boss Straight Adapter

143803302
NO PRIMARY REF14-380-3302: RNCC: 3 | RNVC: 2
5112-00-10: RNCC: 5 | RNVC: 9
51120010: RNCC: 5 | RNVC: 9

8 Nov 1982

4730-14-382-6638
Tube To Boss Straight Adapter

143826638
365A53-1365-21: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-353-1198
Tube To Boss Straight Adapter

143531198
RC55-72: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-262-1705
Pipe Flange

142621705
7062DL1F1F57-5XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-211-6081
Bouchon De Rempliss

142116081
NO PRIMARY REF14-211-6081: RNCC: 3 | RNVC: 2
E137D913: RNCC: 5 | RNVC: 9
E137D913: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-422-1121
Quick Disconnect Coupling Half

144221121
RBS06-1810: RNCC: 3 | RNVC: 2

23 Feb 1988

4730-14-281-6567
Tube Coupling

142816567
L764-31M931P1: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-361-7098
Fluid Passage Bolt

143617098
FKBA30X1-5X46: RNCC: 3 | RNVC: 2
U10374-56: RNCC: 5 | RNVC: 2

20 Feb 1980

4730-14-495-2228
Fluid Passage Bolt

144952228
NO PRIMARY REF14-495-2228: RNCC: 3 | RNVC: 2
1000672: RNCC: 5 | RNVC: 9
F300 0T 018 6611: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-372-7114
Fluid Pressure Line Multiple Connector

143727114
MY20781-3001: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-456-7314
Fluid Flow Restrictor Unit

144567314
A6-60341R5: RNCC: 3 | RNVC: 2

24 Jul 1992

4730-14-473-9634
Fluid Pressure Line Multiple Connector

144739634
13DL06-10X100NUZ: RNCC: 3 | RNVC: 2
6013Z54093: RNCC: 5 | RNVC: 2

18 Jan 1995

4730-14-393-8756
Tube To Boss Straight Adapter

143938756
NO PRIMARY REF14-393-8756: RNCC: 3 | RNVC: 2
980314: RNCC: 5 | RNVC: 9

7 Mar 1996

4730-14-453-5191
Tube To Gas Fitting Straight Adapter

144535191
NO PRIMARY REF14-453-5191: RNCC: 3 | RNVC: 2
RAR1475: RNCC: 5 | RNVC: 2
RD1847-00: RNCC: 5 | RNVC: 9

25 Feb 1992

4730-14-252-2606
Tube Coupling

142522606
ESQ1-52-52TF: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-398-5897
Tube Tee

143985897
GSM164-055F17: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-461-1563
Special-Shaped Hose Clamp

144611563
NO PRIMARY REF14-461-1563: RNCC: 3 | RNVC: 2
130 500S: RNCC: 5 | RNVC: 9

24 Feb 1993

4730-14-273-5207
Pipe Flange

142735207
7062TA1F1-57UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-277-6295
Tube Fitting Clinch Sleeve

142776295
Q1G605-17: RNCC: 3 | RNVC: 2
DKG17: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-215-9643
Embout Pour Embarqu

142159643
536-425-005DET2AU4: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-362-8267
Quick Disconnect Coupling Half

143628267
RBE11-1154/IC: RNCC: 3 | RNVC: 2
RBE11-1154IC: RNCC: 5 | RNVC: 2

19 Mar 1980

4730-14-321-9634
Pipe Flange

143219634
MAT147-0043F1: RNCC: 3 | RNVC: 2
MAT147-0044: RNCC: 4 | RNVC: 1
GSM147-004F5: RNCC: 5 | RNVC: 9
GSM147-04F5: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-474-6978
Tube To Boss Straight Adapter

144746978
955471: RNCC: 3 | RNVC: 2
GE35LM42200BB: RNCC: 3 | RNVC: 2
LN329-017REP95: RNCC: 3 | RNVC: 2
LN329-017DE33,7ISOM42X2: RNCC: 5 | RNVC: 2

24 Feb 1995

4730-14-563-5672
Quick Disconnect Coupling Half

145635672
FEM-751-16FB: RNCC: 3 | RNVC: 2

22 Feb 2010

4730-14-364-8770
Quick Disconnect Coupling Half

143648770
SBA12-7104: RNCC: 3 | RNVC: 2
N007145-75: RNCC: 5 | RNVC: 2

2 Sep 1980

4730-14-410-0741
Pipe Expansion Joint

144100741
307-224-25-25-50: RNCC: 3 | RNVC: 2

4 Jun 1986

4730-14-391-6490
Quick Disconnect Coupling Half

143916490
RBE11-21030D1-5VDFB: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-242-7982
Tube Tee

142427982
NG40901-4APL69N0M1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-345-6508
Fluid Filter Element

143456508
GSM145-005F5REP2ET4: RNCC: 3 | RNVC: 2
GSM145-05F5REP2ET4: RNCC: 5 | RNVC: 2

5 Oct 1977

4730-14-365-7908
Fluid Passage Bolt

143657908
PN10-100102: RNCC: 3 | RNVC: 2
0800-09044: RNCC: 5 | RNVC: 2

8 Oct 1980

4730-14-546-9196
Tube Coupling Inverted Nut

145469196
OR/C14053525: RNCC: 3 | RNVC: 2

7 Sep 2005

4730-14-342-0315
Threaded Tube Fitting Plug

143420315
NO PRIMARY REF14-342-0315: RNCC: 3 | RNVC: 2
709239: RNCC: 5 | RNVC: 9
85-688-3638: RNCC: 6 | RNVC: 9

14 Apr 1977

4730-14-338-6849
Tube To Boss Straight Adapter

143386849
UMA12X12-17NNU: RNCC: 3 | RNVC: 2
4A12-12-17CYLNU: RNCC: 3 | RNVC: 2
12-12-12-17CYLNU: RNCC: 3 | RNVC: 2
EMDAS05347: RNCC: 5 | RNVC: 2
P2-12-12-12-17CYLNU: RNCC: 5 | RNVC: 2
121513NU: RNCC: 5 | RNVC: 2

17 Dec 1976

4730-14-389-2883
Tube Equipe

143892883
B0012-017F4: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-403-0385
Quick Disconnect Plug

144030385
RBE08-8500: RNCC: 3 | RNVC: 2
RBE8-8500: RNCC: 5 | RNVC: 2

25 Jul 1985

4730-14-490-5541
Special-Shaped Hose Clamp

144905541
J05085-04-0800P047: RNCC: 3 | RNVC: 2

2 Oct 1997

4730-14-322-1578
Banc Dessai Embout

143221578
07-19-00-002: RNCC: 3 | RNVC: 2
07-20-27-002: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-367-6534
Pipe Flange

143676534
3500556: RNCC: 3 | RNVC: 2
209612: RNCC: 5 | RNVC: 2
E18377-73: RNCC: 5 | RNVC: 2
E18377-73: RNCC: 5 | RNVC: 2

19 Jan 1981

4730-14-398-5899
Tube Tee

143985899
GSM164-056F12: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-304-8205

4730-14-408-2146
Tuyauterie Raccord

144082146
TGRC61472: RNCC: 3 | RNVC: 2

19 Mar 1986

4730-14-252-2166

4730-14-244-0514

4730-14-278-8054

4730-14-345-4239
Raccord Gonflage Am

143454239
E4060: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-560-7072
Pipe Elbow

145607072
H1837040: RNCC: 3 | RNVC: 2
H1837040: RNCC: 5 | RNVC: 2
CV149896: RNCC: 5 | RNVC: 2

19 May 2009

4730-14-355-2233

4730-14-395-3798
Diaphragme Vis

143953798
N0189F29AREP22: RNCC: 3 | RNVC: 2
N0189F39AREP22: RNCC: 3 | RNVC: 2
N0189F26BREP22: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-296-6838

4730-14-567-3050
Tube Cap

145673050
FNMB10: RNCC: 3 | RNVC: 2

3 Mar 2011

4730-14-567-8253
Quick Disconnect Coupling Half

145678253
4481: RNCC: 3 | RNVC: 2
189 90.00.2: RNCC: 5 | RNVC: 2

14 Apr 2011

4730-14-577-3808
Quick Disconnect Coupling Assembly

145773808
TAP1/2MN: RNCC: 3 | RNVC: 2

11 Sep 2013

4730-14-251-9993
Tube To Boss Straight Adapter

142519993
9C0-10-12G1-2LAIT0N: RNCC: 3 | RNVC: 2
9C0-10-12G1-2LAIT0N: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-489-9334
Tube Coupling

144899334
AGEV12LR1/4EDZB: RNCC: 3 | RNVC: 2
032242X: RNCC: 5 | RNVC: 2

27 Aug 1997

4730-14-328-0106
Racc A Sertir Bague

4730-14-395-3675
Embout A Souder

143953675
N0188F10A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-260-3121
Raccord Prise Oxyge

142603121
164417: RNCC: 3 | RNVC: 2
164417: RNCC: 5 | RNVC: 2
164417: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-463-2028
Tube To Boss Straight Adapter

144632028
F64XS38-1,1/2: RNCC: 3 | RNVC: 2
91741685: RNCC: 5 | RNVC: 9

26 May 1993

4730-14-249-8469

4730-14-352-1580

4730-14-348-1405
Tuyauteri Obturateu

143481405
60BRT267-4: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-455-6429
Quick Disconnect Coupling Half

144556429
LN320001DN50REP3TYPEA2: RNCC: 3 | RNVC: 2

3 Jun 1992

4730-14-414-6471
Pipeline Flexible Spacer

144146471
DLT604354: RNCC: 3 | RNVC: 2

20 Feb 1987

4730-14-363-0535
Tube To Boss Straight Adapter

143630535
41318: RNCC: 3 | RNVC: 2

3 Apr 1980

4730-14-485-0025
Self-Sealing Coupling Assembly

144850025
PR56PR10: RNCC: 3 | RNVC: 2
5000881862: RNCC: 5 | RNVC: 2
5010036654: RNCC: 5 | RNVC: 2

19 Dec 1996

4730-14-247-8557
Raccord Multiple Co

142478557
56062Z: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-367-7056

4730-14-565-0821
Air Trap

145650821
ZC.17.80/80: RNCC: 3 | RNVC: 2

6 Jul 2010

4730-14-357-5576
Bulkhead Hose Connector

143575576
506-12-1TF: RNCC: 3 | RNVC: 2

30 Oct 2001

4730-14-269-1993
Pipe Flange

142691993
7066ED1M30: RNCC: 2 | RNVC: 2
4730BH-30M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-466-8116
Air Hose Connector

144668116
RBE03-2904IC9: RNCC: 3 | RNVC: 2
2427433940: RNCC: 5 | RNVC: 2
RBE2904-901CW: RNCC: 5 | RNVC: 9

30 Nov 1993

4730-14-485-6372
Tube Coupling

144856372
ABFEL1E7S7-8X10: RNCC: 3 | RNVC: 9
ABFEL1E7S7-8X10: RNCC: 5 | RNVC: 9
RD13GEN: RNCC: 5 | RNVC: 9

6 Feb 1997

4730-14-242-7999
Tube Tee

142427999
NG40901-4APL62N0M1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-410-2827
Tube To Boss Straight Adapter

144102827
330A76-0695-20: RNCC: 3 | RNVC: 2

18 Jun 1986

4730-14-499-2877
Quick Disconnect Coupling Assembly

144992877
NO PRIMARY REF14-499-2877: RNCC: 3 | RNVC: 2
017-1338: RNCC: 5 | RNVC: 9
017-1338: RNCC: 5 | RNVC: 9
F300 0T 021 0606: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-418-1459
Tube Coupling

144181459
51160051: RNCC: 3 | RNVC: 2
NO PRIMARY REF14-418-1459: RNCC: 3 | RNVC: 2
51160051: RNCC: 5 | RNVC: 9

6 Aug 1987

4730-14-355-5617
Tube To Boss Straight Adapter

143555617
G1DM27-26X34C0: RNCC: 3 | RNVC: 2
ACAG27X26-34N: RNCC: 3 | RNVC: 2
5BAG27-26-34C0: RNCC: 3 | RNVC: 2

19 Mar 1979

4730-14-490-5539
Special-Shaped Hose Clamp

144905539
J05085-04-0800P045: RNCC: 3 | RNVC: 2

2 Oct 1997

4730-14-324-1143
Pipeline Flexible Spacer

143241143
ERV100-16ANNEAUJAUNESANSBRIDES: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-333-5191
Barillet A 4 Voies

143335191
GSM163-016F17: RNCC: 3 | RNVC: 2
GSM163-16F17: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-382-8109
Tube To Boss Straight Adapter

143828109
0000251200: RNCC: 3 | RNVC: 2
85-692-2629: RNCC: 6 | RNVC: 9

17 Feb 1983

4730-14-372-3844
Tube To Boss Straight Adapter

143723844
P4-1DM10-16X150: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-542-0596
Tube To Boss Straight Adapter

145420596
2830093-001: RNCC: 3 | RNVC: 2
502105006004A: RNCC: 3 | RNVC: 9

2 Jul 2004

4730-14-390-4436
Pipe Expansion Joint

143904436
NO PRIMARY REF14-390-4436: RNCC: 3 | RNVC: 2
264428007: RNCC: 5 | RNVC: 9

26 Jan 1984

4730-14-362-1242
Pipe Flange

143621242
U1198F4-57Z2CND17-13: RNCC: 2 | RNVC: 2

20 Feb 1980

4730-14-473-9890
Self-Sealing Coupling Assembly

144739890
96125634: RNCC: 3 | RNVC: 2
0840-744: RNCC: 3 | RNVC: 2
39135850: RNCC: 3 | RNVC: 2
20064983: RNCC: 3 | RNVC: 2
0840-744: RNCC: 5 | RNVC: 2

18 Jan 1995

4730-14-367-6908
Bossa Raccord Coude

143676908
A63321-2: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-478-5913
Quick Disconnect Coupling Half

144785913
RBE06-2201IAJVHP: RNCC: 3 | RNVC: 2

8 Nov 1995

4730-14-369-6247
Tube Tee

143696247
1464-40-16: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-507-8783
Self-Sealing Coupling Assembly

145078783
5500-6-8: RNCC: 3 | RNVC: 2
70 02 071 29: RNCC: 5 | RNVC: 2

24 Aug 1998

4730-14-367-8000
Quick Disconnect Coupling Half

143678000
S256-1DG: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-564-7556
Tube Reducer Body

145647556
4065708-26: RNCC: 3 | RNVC: 2

3 Jun 2010

4730-14-424-3660
Tube Tee

144243660
DHS613-646-37: RNCC: 3 | RNVC: 2

19 May 1988

4730-14-410-2828
Tube To Boss Straight Adapter

144102828
330A76-0790-20: RNCC: 3 | RNVC: 2

18 Jun 1986

4730-14-369-6250
Tube Coupling

143696250
1464-40-19EMB0UT: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-364-0509
Tube To Boss Straight Adapter

143640509
365A75-2396-01: RNCC: 3 | RNVC: 2

7 Mar 1996

4730-14-342-2101
Pipe Flange

143422101
GSM162-011F10DE216: RNCC: 3 | RNVC: 2
GSM162-11F10DE216: RNCC: 5 | RNVC: 2

14 Apr 1977

4730-14-447-4880
Pipe Flange

144474880
LN327-016-11B-PN50DN40: RNCC: 3 | RNVC: 2

24 May 1991

4730-14-346-4444
Pipe Flange

143464444
BN314509: RNCC: 3 | RNVC: 2
NG423-00-77: RNCC: 5 | RNVC: 2

12 Dec 1977

4730-14-279-5593
Self-Sealing Coupling Half

142795593
9949312: RNCC: 3 | RNVC: 2
TAHM155S5-716-6D: RNCC: 5 | RNVC: 2
9949312: RNCC: 5 | RNVC: 9
TAHM155S5-716-6D: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-321-5805
Pipe Flange

143215805
U1092EB133: RNCC: 2 | RNVC: 2
4730BV-133: RNCC: 5 | RNVC: 2
7067E133: RNCC: 5 | RNVC: 9
7067E133C337CL2: RNCC: 5 | RNVC: 9
7067E133GAMMM11CU-AL9NI3FE2: RNCC: 5 | RNVC: 9
7067E133GAMMM12CU-AL9NI3FE2: RNCC: 5 | RNVC: 9
7068E133: RNCC: 5 | RNVC: 9
7068E133C337CL2: RNCC: 5 | RNVC: 9
7068E133GAMMM11CU-AL9NI3FE2: RNCC: 5 | RNVC: 9
7068E133GAMMM12CU-AL9NI3FE2: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-380-3979
Fluid Pressure Line Multiple Connector

143803979
A24249-5: RNCC: 3 | RNVC: 2
85-691-5543: RNCC: 6 | RNVC: 9

8 Nov 1982

4730-14-262-1729
Pipe Flange

142621729
7062DL1F1F76-5-14CD2-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-500-0666
Anchor And Reinforcement Pipe Clamp

145000666
L444454: RNCC: 3 | RNVC: 2
426765: RNCC: 5 | RNVC: 2
0000436: RNCC: 5 | RNVC: 2
DBAL444454: RNCC: 5 | RNVC: 9
F300 0T 024 0657: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-545-1600
Hydraulic System Accessories Manifold

145451600
065120W: RNCC: 3 | RNVC: 2

22 Mar 2005

4730-14-544-6279
Tube To Boss Straight Adapter

145446279
0110752007: RNCC: 3 | RNVC: 2
073106016015021: RNCC: 5 | RNVC: 2

14 Feb 2005

4730-14-553-4444
Tube Fitting Insert

145534444
0319778380: RNCC: 3 | RNVC: 2

4 Apr 2007

4730-14-409-6898
Tube To Boss Straight Adapter

144096898
742DGA25: RNCC: 3 | RNVC: 2
74742DGA25: RNCC: 5 | RNVC: 2

28 May 1986

4730-14-553-1333
Tube To Boss Straight Adapter

145531333
GE08LMEDCF: RNCC: 3 | RNVC: 2
427361: RNCC: 5 | RNVC: 2
GE08LMEDCF: RNCC: 5 | RNVC: 9

6 Mar 2007

4730-14-463-5467
Tube To Boss Straight Adapter

144635467
324: RNCC: 3 | RNVC: 2
Z34384: RNCC: 5 | RNVC: 9

17 Jun 1993

4730-14-530-8165
Tube To Boss Straight Adapter

145308165
01012085: RNCC: 3 | RNVC: 2

8 Jul 2002

4730-14-367-1899
Fluid Passage Bolt

143671899
DLT024780: RNCC: 3 | RNVC: 2

11 Dec 1980

4730-14-331-1137
Fluid Pressure Line Multiple Connector

143311137
44011: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-366-9351
Fluid Pressure Line Multiple Connector

143669351
003281080P: RNCC: 3 | RNVC: 2

11 Dec 1980

4730-14-555-3458
Salvage Air Hose Connection Assembly

145553458
718740: RNCC: 3 | RNVC: 2

29 Oct 2007

4730-14-436-6027
Bulkhead Hose Connector

144366027
DA2C205513521U1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-506-1949
Pipe Flange

145061949
L069: RNCC: 3 | RNVC: 2
RAQ0340: RNCC: 5 | RNVC: 2

9 Apr 1998

4730-14-544-7526
Tube To Hose Straight Adapter

145447526
P763094: RNCC: 3 | RNVC: 2

22 Feb 2005

4730-14-288-4128
Fluid Passage Bolt

142884128
0157087210: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-411-0622
Reduction

144110622
520513: RNCC: 3 | RNVC: 2

6 Aug 1986

4730-14-248-1066

4730-14-255-0687
Raccord Avec Tube S

142550687
479P480: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-345-7673

4730-14-322-5453

4730-14-218-7413

4730-14-349-0173
Fluid Pressure Line Multiple Connector

143490173
D616V24-90K1: RNCC: 3 | RNVC: 2
D616V24-90K: RNCC: 5 | RNVC: 2

19 Apr 1978

4730-14-387-8863
Tube Tee

143878863
713 D 08 08 08: RNCC: 3 | RNVC: 2
P165D080808: RNCC: 3 | RNVC: 2
713D08 08 08: RNCC: 5 | RNVC: 2
713D08-08-08: RNCC: 5 | RNVC: 2
713D080808: RNCC: 5 | RNVC: 2
74713D080808: RNCC: 5 | RNVC: 2
74713D080808: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-512-4089
Hose To Gas Fitting Straight Adapter

145124089
Y00005225: RNCC: 3 | RNVC: 2
5225: RNCC: 5 | RNVC: 2
5225: RNCC: 5 | RNVC: 9

15 Feb 1999

4730-14-503-1852
Bulkhead Hose Connector

145031852
RA1M592005038: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-525-7907
Tube To Boss Straight Adapter

145257907
F145312B: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-444-1569
Bulkhead Hose Connector

144441569
PM1A725426220: RNCC: 3 | RNVC: 2
PM1A725426220: RNCC: 5 | RNVC: 2

18 Dec 1990

4730-14-523-2237
Hydraulic Swivel Joint

145232237
A34726: RNCC: 3 | RNVC: 2

10 Jan 2001

4730-14-462-7153
Tube To Boss Straight Adapter

144627153
SBE1128: RNCC: 3 | RNVC: 2

28 Apr 1993

4730-14-392-4635
Tube Tee

143924635
JBMB10: RNCC: 3 | RNVC: 2
JBMB10: RNCC: 3 | RNVC: 2
JBM8X10: RNCC: 5 | RNVC: 2
032053M: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-506-0364
Bulkhead Hose Connector

145060364
RA1M521709191U2: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-525-6143
Tube To Boss Straight Adapter

145256143
20 236 108 1030: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-515-2179
Tube To Boss Straight Adapter

145152179
0009520690: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-526-1253
Tube To Gas Fitting Straight Adapter

145261253
H110845: RNCC: 3 | RNVC: 2

4 Jul 2001

4730-14-485-3257
Tube To Hose Straight Adapter

144853257
18012: RNCC: 3 | RNVC: 2
RAR1650: RNCC: 5 | RNVC: 2

15 Jan 1997

4730-14-313-5942
Fluid Passage Bolt

143135942
16559413: RNCC: 3 | RNVC: 2
10304891: RNCC: 5 | RNVC: 2
16559413: RNCC: 5 | RNVC: 9
16559413: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-472-4789
Pipe Flange

144724789
1088787P00: RNCC: 3 | RNVC: 2

26 Oct 1994

4730-14-426-2973
Tube Tee

144262973
50111592: RNCC: 3 | RNVC: 2
91697443: RNCC: 5 | RNVC: 2
50111592: RNCC: 5 | RNVC: 9

18 Aug 1988

4730-14-515-6136
Tube To Boss Straight Adapter

145156136
072709: RNCC: 3 | RNVC: 2

21 Jul 1999

4730-14-519-1202
Hose Fitting Swaging Socket

145191202
JUPE000003: RNCC: 3 | RNVC: 2

8 Mar 2000

4730-14-518-5122
Tube To Boss Straight Adapter

145185122
HRAXX000172: RNCC: 3 | RNVC: 9

9 Feb 2000

4730-14-515-7940
Fluid Flow Restrictor

145157940
6743402500: RNCC: 3 | RNVC: 2

4 Aug 1999

4730-14-383-6846
Tube To Boss Straight Adapter

143836846
0211410017: RNCC: 3 | RNVC: 2

11 Apr 1983

4730-14-553-1338
Tube Fitting Socket Welded Ferrule

145531338
0000310740: RNCC: 3 | RNVC: 2

6 Mar 2007

4730-14-402-0063
Tuyauterie Retenue

144020063
23 005 24: RNCC: 3 | RNVC: 2
2300.524: RNCC: 3 | RNVC: 2
23 005 80: RNCC: 5 | RNVC: 2

26 Jun 1985

4730-14-420-0488
Reducteur Cone

144200488
RAG17XG13N: RNCC: 3 | RNVC: 2
192RAG17G13: RNCC: 3 | RNVC: 2

18 Nov 1987

4730-14-372-7970
Fluid Passage Bolt

143727970
52S1003604: RNCC: 3 | RNVC: 2
52S1003604: RNCC: 5 | RNVC: 2

21 Sep 1981

4730-14-378-2935
Fluid Passage Bolt

143782935
61413: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-378-8246
Tube To Boss Straight Adapter

143788246
413976: RNCC: 3 | RNVC: 2
E25824: RNCC: 5 | RNVC: 2

11 Aug 1982

4730-14-551-1594
Tube Tee

145511594
T10SA3CX: RNCC: 3 | RNVC: 2

30 Aug 2006

4730-14-282-9919
Quick Disconnect Coupling Half

142829919
E29572A40WW: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-360-6642
Tube Fitting Clinch Sleeve

143606642
DA14LL: RNCC: 3 | RNVC: 2

19 Dec 1979

4730-14-455-9551
Tube Tee

144559551
PM1A753191009: RNCC: 3 | RNVC: 2
PM1A753191009: RNCC: 5 | RNVC: 2

11 Jun 1992

4730-14-286-3168
Sediment Strainer Element

142863168
104047A: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-323-6715
Bulkhead Hose Connector

143236715
R5806Z15: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-392-7664
Pipe Flange

143927664
232803: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-547-8272
Tube Tee

145478272
280895: RNCC: 3 | RNVC: 2
V877106: RNCC: 5 | RNVC: 2

17 Nov 2005

4730-14-378-8801
Tube To Boss Straight Adapter

143788801
215440: RNCC: 3 | RNVC: 2

6 Sep 1982

4730-14-513-2144
Tube To Boss Straight Adapter

145132144
643449101: RNCC: 3 | RNVC: 2
6F300 0T 017 4691: RNCC: 5 | RNVC: 9
F300 0T 017 3474: RNCC: 6 | RNVC: 9

10 Mar 1999

4730-14-398-2420
Fluid Pressure Line Multiple Connector

143982420
6T10SMK: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-402-6406
Sediment Strainer Element

144026406
5620101: RNCC: 3 | RNVC: 2
FOE5620101: RNCC: 5 | RNVC: 9

19 Jul 1985

4730-14-327-6209
Bulkhead Hose Connector

143276209
0264752570: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-548-7410
Lubrication Fitting

145487410
76106024500: RNCC: 3 | RNVC: 2

6 Feb 2006

4730-14-397-7410
Tube To Boss Straight Adapter

143977410
16017830K: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-265-9512
Tube To Boss Straight Adapter

142659512
MF72: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-382-8723
Tube To Boss Straight Adapter

143828723
PE60801H20: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-441-0276
Fluid Passage Bolt

144410276
007605010P: RNCC: 3 | RNVC: 2

14 Aug 1990

4730-14-382-8800
Tube Coupling

143828800
PE40001K04: RNCC: 3 | RNVC: 2

2 Aug 2000

4730-14-346-9564
Tube To Boss Straight Adapter

143469564
A80094: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-362-4084
Tube To Hose Straight Adapter

143624084
01220604: RNCC: 3 | RNVC: 2
437375: RNCC: 5 | RNVC: 2
1220604: RNCC: 5 | RNVC: 2

19 Mar 1980

4730-14-545-0567
Tube Coupling

145450567
19214550: RNCC: 3 | RNVC: 2
1218: RNCC: 3 | RNVC: 9

16 Mar 2005

4730-14-376-7627
Tube To Boss Straight Adapter

143767627
23S12004: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-508-0925
Tube Tee

145080925
10270651: RNCC: 3 | RNVC: 2

26 Aug 1998

4730-14-396-2089
Tube To Boss Straight Adapter

143962089
5000900868: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-568-0231
Tube Coupling Assembly

145680231
214461-0: RNCC: 3 | RNVC: 2

3 May 2011

4730-14-437-0362
Tube To Boss Straight Adapter

144370362
F0532S4710X0002-3612: RNCC: 3 | RNVC: 2
4A25/33X200SNUDTAT: RNCC: 3 | RNVC: 2
S4710X0002-3612: RNCC: 5 | RNVC: 2
804V99058: RNCC: 5 | RNVC: 2
5005030856: RNCC: 5 | RNVC: 2

16 Jan 1990

4730-14-565-0915
Quick Disconnect Coupling Half

145650915
7-1000-718: RNCC: 3 | RNVC: 2

7 Jul 2010

4730-14-320-7303
Tube To Boss Straight Adapter

143207303
A581-004: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-396-3690
Fluid Passage Bolt

143963690
476750G: RNCC: 3 | RNVC: 2
27102507-8: RNCC: 5 | RNVC: 2

27 Nov 1984

4730-14-361-6342

4730-14-422-3595
Anchor And Reinforcement Pipe Clamp

144223595
RISPAL5030PP-DPAL-AS: RNCC: 3 | RNVC: 2

1 Mar 1988

4730-14-398-5887
Tube Tee

143985887
GSM164-055F7: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-296-6836

4730-14-570-6306
Quick Disconnect Coupling Half

145706306
RME16.1622/PP: RNCC: 3 | RNVC: 2
RME16.1622/PP: RNCC: 5 | RNVC: 2
40007039: RNCC: 5 | RNVC: 2

12 Jan 2012

4730-14-259-7274
Equerre Orientable

142597274
105A8-12X100: RNCC: 3 | RNVC: 2
1809-8-12X100: RNCC: 3 | RNVC: 2
T0RSA8X12-100N: RNCC: 3 | RNVC: 2
121051: RNCC: 5 | RNVC: 2
91758304: RNCC: 5 | RNVC: 2
1809-8-12X100NN: RNCC: 5 | RNVC: 2
TORSA8-12X100: RNCC: 5 | RNVC: 2
P2-1809-8-12X100NN: RNCC: 5 | RNVC: 2
TORSA8X12-100N: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-290-9370
Tube Tee

142909370
17-16: RNCC: 3 | RNVC: 2
TA16: RNCC: 3 | RNVC: 2
10A16: RNCC: 3 | RNVC: 2
T16: RNCC: 3 | RNVC: 2
TA16N: RNCC: 5 | RNVC: 2
121134: RNCC: 5 | RNVC: 2
M4ZS460D8293: RNCC: 5 | RNVC: 2
0011050827: RNCC: 5 | RNVC: 2
0011050827: RNCC: 5 | RNVC: 9
42500023: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-374-3321
Tube To Boss Straight Adapter

143743321
286809: RNCC: 3 | RNVC: 2
85-691-6371: RNCC: 6 | RNVC: 9

8 Dec 1981

4730-14-402-9814
Quick Disconnect Coupling Half

144029814
RBE19-6104: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-410-0477
Quick Disconnect Coupling Half

144100477
PAS5-434-33-02: RNCC: 3 | RNVC: 2

4 Jun 1986

4730-14-412-3380
Fluid Pressure Line Multiple Connector

144123380
GSM164-044F9: RNCC: 3 | RNVC: 2

8 Oct 1986

4730-14-398-1109
Tube Coupling

143981109
NO PRIMARY REF14-398-1109: RNCC: 3 | RNVC: 2
A18AP0050-123: RNCC: 5 | RNVC: 9

31 Jan 1985

4730-14-427-8940
Tube To Boss Straight Adapter

144278940
GE25SREDA3CX: RNCC: 3 | RNVC: 9
XGE25-PSR-ED-A3C: RNCC: 5 | RNVC: 9

19 Nov 1988

4730-14-490-3080
Flange To Boss Straight Adapter

144903080
J05085-01-0310P016: RNCC: 3 | RNVC: 2

24 Sep 1997

4730-14-399-6002
Quick Disconnect Coupling Half

143996002
905020154: RNCC: 3 | RNVC: 2
85-692-9337: RNCC: 6 | RNVC: 9

6 Mar 1985

4730-14-221-7256
Raccord Orientable

142217256
P939-30ARS: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-351-8461
Tube To Boss Straight Adapter

143518461
UML6-14X150: RNCC: 3 | RNVC: 2

16 Oct 1978

4730-14-533-6483
Tube Tee

145336483
702A30-5500-59: RNCC: 3 | RNVC: 2

14 Feb 2003

4730-14-325-3626
Tube To Boss Straight Adapter

143253626
ECHC289K9-12REP3: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-339-9769
Bulkhead Hose Connector

143399769
GSM169-016F11: RNCC: 3 | RNVC: 2
401MA354F4REP1: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-228-6814
Tube Tee

142286814
GSM1297FE3-4TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-573-0199
Tube Tee

145730199
NSA855008-6: RNCC: 1 | RNVC: 2
PE20003-06: RNCC: 3 | RNVC: 2
NSA855008-6: RNCC: 5 | RNVC: 2

4 Sep 2012

4730-14-440-8337
Fluid Flow Restrictor

144408337
36044051200: RNCC: 3 | RNVC: 2
36044051200: RNCC: 5 | RNVC: 2
36044051200: RNCC: 5 | RNVC: 2
36044051200: RNCC: 5 | RNVC: 9

30 Jul 1990

4730-14-450-8280
Hydraulic System Accessories Manifold

144508280
39071358: RNCC: 3 | RNVC: 2

23 Oct 1991

4730-14-236-8077
Sediment Strainer Element

142368077
24824A: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-450-3729
Pipe Expansion Joint

144503729
PC30849: RNCC: 3 | RNVC: 2

1 Oct 1991

4730-14-432-5130
Tube To Boss Straight Adapter

144325130
16043014: RNCC: 3 | RNVC: 2

14 Jun 1989

4730-14-432-2534
Tube Repair Plug

144322534
NCHX01H013EF5REP2TAMPON: RNCC: 3 | RNVC: 2
NCHX01H013DF5REP2TAMPON: RNCC: 5 | RNVC: 2

31 May 1989

4730-14-321-4999
Pipe Flange

143214999
C11334C: RNCC: 3 | RNVC: 2
C11334: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-410-6815
Sediment Strainer Element

144106815
0308857190: RNCC: 3 | RNVC: 2

9 Jul 1986

4730-14-378-3174
Pipe Flange

143783174
11581: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-525-6325
Tube Tee

145256325
20 236 915 4180: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-321-5773
Pipe Expansion Joint

143215773
XMT584972: RNCC: 3 | RNVC: 2
SK4988: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-491-0472
Tube To Boss Straight Adapter

144910472
79041996: RNCC: 3 | RNVC: 2
F300 0T 001 2201: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-440-2179
Tube To Boss Straight Adapter

144402179
01011071: RNCC: 3 | RNVC: 2
91484162: RNCC: 5 | RNVC: 2

11 Jul 1990

4730-14-429-4237
Fluid Pressure Line Multiple Connector

144294237
DSVW20SRA3C: RNCC: 3 | RNVC: 2
DSVW20SRA3C: RNCC: 3 | RNVC: 9
DSVW20PSR: RNCC: 5 | RNVC: 9

23 Jan 1989

4730-14-503-2159
Bulkhead Hose Connector

145032159
RA1M533203190: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-547-5596
Bulkhead Hose Connector

145475596
RA1B533203190: RNCC: 3 | RNVC: 2

15 Oct 2005

4730-14-537-8395
Quick Disconnect Plug

145378395
8651060: RNCC: 3 | RNVC: 2
622109: RNCC: 5 | RNVC: 2

27 Nov 2003

4730-14-431-4156
Pipe Flange

144314156
V57351N: RNCC: 3 | RNVC: 2

18 Apr 1989

4730-14-325-9016
Pipe Flange

143259016
AS34TV107REP14: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-437-2360
Quick Disconnect Coupling Half

144372360
HA 05341 00: RNCC: 3 | RNVC: 2
HA0534100: RNCC: 5 | RNVC: 2

23 Jan 1990

4730-14-361-2196
Fluid Pressure Line Multiple Connector

143612196
5000117811: RNCC: 3 | RNVC: 2
5000117811: RNCC: 5 | RNVC: 9
5000117811: RNCC: 6 | RNVC: 9

24 Jan 1980

4730-14-339-1510
Pipe Flange

143391510
I131H50BRIDE: RNCC: 2 | RNVC: 2

17 Dec 1976

4730-14-418-6232
Sediment Strainer Element

144186232
M24258: RNCC: 3 | RNVC: 9

7 Sep 1987

4730-14-417-7735
Tube To Boss Straight Adapter

144177735
Q15GE38SM42150: RNCC: 3 | RNVC: 2
8401383766NU: RNCC: 3 | RNVC: 2

22 Jul 1987

4730-14-451-8039
Tube-Hose Fitting Compression Sleeve

144518039
TXS25: RNCC: 3 | RNVC: 2
91713698: RNCC: 5 | RNVC: 2

4 Dec 1991

4730-14-440-4185
Tube To Boss Straight Adapter

144404185
A88932: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-296-6817

4730-14-554-4526
Non-Metallic Connecting Sleeve

145544526
09930215: RNCC: 3 | RNVC: 2

10 Jul 2007

4730-14-566-0304
Tube Elbow

145660304
91072: RNCC: 3 | RNVC: 2
438024: RNCC: 5 | RNVC: 2

13 Oct 2010

4730-14-491-3210
Contre-Ecrou

144913210
6076123: RNCC: 3 | RNVC: 9
F300 0T 002 2577: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-221-2747

4730-14-550-8610
Tube Coupling

145508610
23REDN/LN329/042-F10/19-1/2DN15: RNCC: 3 | RNVC: 2

25 Jul 2006

4730-14-340-2547

4730-14-561-8028
Tube Tee

145618028
JNPMB12: RNCC: 3 | RNVC: 2
JNPMB12: RNCC: 5 | RNVC: 9

8 Sep 2009

4730-14-287-3258
Buse

142873258
S12095: RNCC: 3 | RNVC: 2
S12095DB: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-281-6836
Bride A Zinc

142816836
109REPB: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-467-9231
Tube To Hose Straight Adapter

144679231
PE41051-1: RNCC: 3 | RNVC: 2

2 Feb 1994

4730-14-387-8906
Fluid Pressure Line Multiple Connector

143878906
P431B14: RNCC: 3 | RNVC: 2
731.B.14: RNCC: 3 | RNVC: 2
164845: RNCC: 5 | RNVC: 2
74731B14: RNCC: 5 | RNVC: 2
74731B14: RNCC: 5 | RNVC: 2
731 B 14: RNCC: 5 | RNVC: 2
731B14: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-273-5147

4730-14-205-0557

4730-14-241-3405
Bouchon Special

142413405
A63798: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-283-5525
Raccord

142835525
340904: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-303-8076

4730-14-565-1243
Sediment Strainer

145651243
677245: RNCC: 3 | RNVC: 2

13 Jul 2010

4730-14-364-9973

4730-14-355-8583
Tube To Boss Straight Adapter

143558583
1-398-526: RNCC: 3 | RNVC: 2

5 Apr 1979

4730-14-496-2266
Graisseur

144962266
75018-2: RNCC: 3 | RNVC: 2
F300 0T 021 0445: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-295-8351
Flexible Tube Coupling Assembly

142958351
E20.F.3: RNCC: 3 | RNVC: 2
E20F3: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-405-3731
Tube To Gas Fitting Straight Adapter

144053731
615989: RNCC: 3 | RNVC: 2

27 Nov 1985

4730-14-562-5390
Tube To Boss Elbow

145625390
3169 12 13: RNCC: 3 | RNVC: 2
FS0002391: RNCC: 6 | RNVC: 9

3 Nov 2009

4730-14-569-4201
Tube Elbow

145694201
3159 04 10: RNCC: 3 | RNVC: 2

14 Sep 2011

4730-14-303-7847

4730-14-235-6399

4730-14-488-4053
Flange To Tube Straight Adapter

144884053
T3237589: RNCC: 3 | RNVC: 2
T32375-89: RNCC: 5 | RNVC: 2

7 May 1997

4730-14-268-5084
Return Tube Bend

142685084
A49182C60-3ASJ: RNCC: 2 | RNVC: 2
3D180-60-3MM: RNCC: 3 | RNVC: 2
3D180-60-3MM: RNCC: 3 | RNVC: 2
E29-044-60-3MM180: RNCC: 5 | RNVC: 2
3D180-60-3MM: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-390-6227
Tube Tee

143906227
FA888-90042047180: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-385-7263
Lubrication Fitting

143857263
024588-0121: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-328-9699
Fluid Passage Bolt

143289699
NO PRIMARY REF14-328-9699: RNCC: 3 | RNVC: 2
324307REPU1: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-383-8682
Bulkhead Hose Connector

143838682
64353280001BREPAAH-F15A23-23DN20: RNCC: 3 | RNVC: 2

11 Apr 1983

4730-14-253-8089
Reducteur Pour Tube

142538089
21-91-03D16D1-12: RNCC: 3 | RNVC: 2
721-910-331: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-294-9289
Tube Fitting Brazing Ferrule

142949289
7062BB1B1966EMT1-20CUB: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-362-5219
Tube Tee

143625219
NO PRIMARY REF14-362-5219: RNCC: 3 | RNVC: 2
9092913: RNCC: 5 | RNVC: 9
EVL12L: RNCC: 5 | RNVC: 9

19 Mar 1980

4730-14-522-5260
Fluid Pressure Line Multiple Connector

145225260
1977D30-02: RNCC: 3 | RNVC: 2

31 Oct 2000

4730-14-496-5477
Tube To Boss Straight Adapter

144965477
89817: RNCC: 3 | RNVC: 2
F300 0T 021 6529: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-335-3364
Fluid Pressure Line Multiple Connector

143353364
177467: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-515-4394
Tube To Boss Straight Adapter

145154394
90FJ78MJ78: RNCC: 3 | RNVC: 2
SOA90FJ78MJ78: RNCC: 5 | RNVC: 9

13 Jul 1999

4730-14-515-9755
Hydraulic System Accessories Manifold

145159755
25673817: RNCC: 3 | RNVC: 2

1 Sep 1999

4730-14-460-9186
Tube To Boss Straight Adapter

144609186
TB4011301: RNCC: 3 | RNVC: 2

16 Feb 1993

4730-14-500-1313
Lubrication Fitting Adapter

145001313
601737: RNCC: 3 | RNVC: 2
F300 0T 024 1325: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-274-6604
Tube-Hose Fitting Compression Sleeve

142746604
7062CE1F2B57UE10R1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-521-1722
Tube Fitting Clinch Sleeve

145211722
139552: RNCC: 3 | RNVC: 2

12 Jul 2000

4730-14-504-5222
Fuel Feeder Manifold

145045222
9375.875: RNCC: 3 | RNVC: 2
9375.850: RNCC: 5 | RNVC: 2

18 Feb 1998

4730-14-041-6589
Pipe Flange

140416589
RUHF18C2: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-514-9917
Tube To Boss Swivel Joint

145149917
SM 612 MF: RNCC: 3 | RNVC: 2
SM612MF: RNCC: 5 | RNVC: 2

25 Jun 1999

4730-14-399-9501
Tube To Boss Straight Adapter

143999501
602564: RNCC: 3 | RNVC: 2
602254: RNCC: 6 | RNVC: 9

24 Apr 1985

4730-14-532-6246
Tube Fitting Socket Welded Ferrule

145326246
01017951: RNCC: 3 | RNVC: 2
01017951: RNCC: 5 | RNVC: 9

21 Nov 2002

4730-14-296-1071
Fluid Pressure Line Multiple Connector

142961071
3005440: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-564-3589
Tube Elbow

145643589
1SA99690: RNCC: 3 | RNVC: 2

26 Apr 2010

4730-14-395-0509
Fluid Pressure Line Multiple Connector

143950509
0301520350: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-313-4851
Sediment Strainer Body

143134851
401MA0394F4: RNCC: 3 | RNVC: 2
401MA394F4: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-575-0104
Hose Tee

145750104
7421168493: RNCC: 3 | RNVC: 2
21168493: RNCC: 5 | RNVC: 2
7421168493: RNCC: 5 | RNVC: 2

6 Mar 2013

4730-14-228-6916

4730-14-214-0017

4730-14-344-3079

4730-14-427-8510
Element Raccord

144278510
AS34TQ104GREP4A: RNCC: 3 | RNVC: 2

17 Nov 1988

4730-14-561-3453
Tube To Boss Straight Adapter

145613453
1511215: RNCC: 3 | RNVC: 2

7 Jul 2009

4730-14-473-7267
Fausse Crepine

144737267
MAT145-0051: RNCC: 3 | RNVC: 2

10 Jan 1995

4730-14-339-9777
Raccord Flexible

143399777
GSM166-004F6: RNCC: 3 | RNVC: 2
GSM166-04F6: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-041-3804
Tube To Boss Straight Adapter

140413804
Q1-5204-14-12-17CYL: RNCC: 3 | RNVC: 2
UMK14X12-17N: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-377-8635
Quick Disconnect Coupling Assembly

143778635
350AVF48: RNCC: 3 | RNVC: 2
85-692-1202: RNCC: 6 | RNVC: 9

10 Jun 1982

4730-14-295-1964
Tube To Boss Straight Adapter

142951964
12-10-12X100NU: RNCC: 3 | RNVC: 2
4A10-12X100NU: RNCC: 5 | RNVC: 2
UMA10X12-100NNU: RNCC: 5 | RNVC: 2
5005030707: RNCC: 5 | RNVC: 2
4A10-12X100NU: RNCC: 5 | RNVC: 9
5005030707: RNCC: 6 | RNVC: 9

1 Jan 1973

4730-14-375-9597
Fluid Pressure Line Multiple Connector

143759597
NO PRIMARY REF14-375-9597: RNCC: 3 | RNVC: 2
404111426: RNCC: 5 | RNVC: 9
404111426: RNCC: 5 | RNVC: 9

30 Mar 1982

4730-14-305-9084
Pipe Flange

143059084
GSM162-011F7DE133: RNCC: 3 | RNVC: 2
A0143-001F5DE133: RNCC: 5 | RNVC: 2
GSM162-11F7DE133: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-318-9278
Bulkhead Hose Connector

143189278
A590-027: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-525-0778
Quick Disconnect Coupling Half

145250778
RBE08-11020DIAHPJVFB: RNCC: 3 | RNVC: 2

18 May 2001

4730-14-032-1461
Pipe Expansion Joint

140321461
NO PRIMARY REF14-032-1461: RNCC: 3 | RNVC: 2
M14715-2: RNCC: 5 | RNVC: 9

5 Aug 1981

4730-14-313-7652

4730-14-262-5750
Siege De Purgeur

142625750
5703REPE: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-565-9076
Fluid Pressure Line Multiple Connector

145659076
CQ01020307A: RNCC: 3 | RNVC: 2

4 Oct 2010

4730-14-272-2146

4730-14-282-8806

4730-14-241-5962
Fluid Passage Bolt

142415962
80412: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-457-5463
Bulkhead Hose Connector

144575463
UCL10: RNCC: 3 | RNVC: 9
02101685: RNCC: 5 | RNVC: 2

10 Sep 1992

4730-14-565-2232
Tube Tee

145652232
832.050.050: RNCC: 3 | RNVC: 2
SA017634: RNCC: 5 | RNVC: 2

28 Jul 2010

4730-14-565-2068
Tube Elbow

145652068
821.000.075: RNCC: 3 | RNVC: 2
SA018104: RNCC: 5 | RNVC: 2

26 Jul 2010

4730-14-563-3264
Tube To Boss Straight Adapter

145633264
2402 714 710L: RNCC: 3 | RNVC: 2

26 Jan 2010

4730-14-268-5141

4730-14-444-9970
Tube Union

144449970
F8RAB10M14X1-5: RNCC: 3 | RNVC: 2

30 Jan 1991

4730-14-386-9905
Tube To Boss Straight Adapter

143869905
F4BRAB8-1/4: RNCC: 3 | RNVC: 2
F4BRAB8-1/4: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-362-9041

4730-14-034-1568

4730-14-261-5826
Bouchon Special

142615826
102104A: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-263-7072
Raccord Circuit Car

142637072
A23005-1: RNCC: 3 | RNVC: 2
A23005-1: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-518-6741
Tube To Boss Straight Adapter

145186741
5-3601SB32A: RNCC: 3 | RNVC: 2
5-3601SB32A: RNCC: 5 | RNVC: 9

11 Feb 2000

4730-14-410-9561
Air Conduit Coude

144109561
8001289: RNCC: 3 | RNVC: 2
8001289: RNCC: 5 | RNVC: 9

23 Jul 1986

4730-14-260-9250
Pipe Flange

142609250
7062DB1F1F121XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-528-3664
Tube Tee

145283664
6S6LOSS: RNCC: 3 | RNVC: 2

23 Jan 2002

4730-14-533-2494
Tube To Boss Straight Adapter

145332494
V103475: RNCC: 3 | RNVC: 2

29 Jan 2003

4730-14-454-9758
Fluid Flow Restrictor

144549758
26044000680: RNCC: 3 | RNVC: 2
43332958: RNCC: 5 | RNVC: 2
572668-00: RNCC: 5 | RNVC: 2

30 Apr 1992

4730-14-277-2810
Tube Fitting Clinch Sleeve

142772810
Q1G605-21: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-452-7587
Tube Coupling Inverted Nut

144527587
A763-002: RNCC: 3 | RNVC: 2

15 Jan 1992

4730-14-330-8813

4730-14-368-9097
Ensem Bride A Joint

143689097
B0311F14B: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-477-4435
Fluid Passage Bolt

144774435
10027573: RNCC: 3 | RNVC: 2

30 Aug 1995

4730-14-367-7293
Quick Disconnect Coupling Half

143677293
S12591DB: RNCC: 3 | RNVC: 2
S12591DB21: RNCC: 5 | RNVC: 2
85-693-6434: RNCC: 6 | RNVC: 9

19 Jan 1981

4730-14-336-7161
Tube Coupling

143367161
2704-50-01: RNCC: 3 | RNVC: 2

7 Oct 1976

4730-14-309-3944
Pipe Flange

143093944
536-403-017DET21: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-407-9980
Tube To Boss Straight Adapter

144079980
S4710X0002-4275: RNCC: 3 | RNVC: 2
F0532S4710X0002-4275: RNCC: 5 | RNVC: 2
519 90 30 052 11: RNCC: 5 | RNVC: 2
S4710X0002-4275: RNCC: 5 | RNVC: 9

19 Mar 1986

4730-14-273-5073
Tube To Boss Straight Adapter

142735073
7062BA1RCET1-20UA9: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-447-5357
Flexible Tube Coupling Assembly

144475357
10796: RNCC: 3 | RNVC: 9
85-694-1547: RNCC: 6 | RNVC: 9

28 May 1991

4730-14-576-8427
Tube Tee

145768427
ASNA3752-160610: RNCC: 1 | RNVC: 2
PE20103-160610: RNCC: 3 | RNVC: 2
ASNA3752-160610: RNCC: 5 | RNVC: 2

18 Jul 2013

4730-14-563-8819
Tube Fitting Socket Welded Ferrule

145638819
4741-06-06: RNCC: 3 | RNVC: 2

24 Mar 2010

4730-14-233-8210
Barillet Air Compri

142338210
10030-39-119: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-428-5192
Sortie Tube Embout

144285192
NO PRIMARY REF14-428-5192: RNCC: 3 | RNVC: 2
43779: RNCC: 5 | RNVC: 9

8 Dec 1988

4730-14-303-7406
Tube Tee

143037406
Q2-17-10NNNU: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-575-5777
Tube Tee

145755777
100005739C0: RNCC: 3 | RNVC: 2
100-0057-39-C0: RNCC: 5 | RNVC: 2

16 Apr 2013

4730-14-273-5043
Tube To Boss Straight Adapter

142735043
7062BA1RCET2-36C337A: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-327-8320
Pipe Expansion Joint

143278320
307-231-65-25-90: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-449-5409
Tube Tee

144495409
TE EGAL NU 2353L33,7: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-260-8364
Quick Disconnect Coupling Half

142608364
U39/8/7,5: RNCC: 3 | RNVC: 2
U39-8-7-5: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-526-4738
Bulkhead Hose Connector

145264738
726.T.08.08S.BP: RNCC: 3 | RNVC: 2
P426T0808SBP: RNCC: 3 | RNVC: 2
726 T 08 08S BP: RNCC: 5 | RNVC: 2
726T0808SBP: RNCC: 5 | RNVC: 2
726T08-08SBP: RNCC: 5 | RNVC: 2
74726T0808SBP: RNCC: 5 | RNVC: 2
74726T0808SBP: RNCC: 5 | RNVC: 2

1 Aug 2001

4730-14-302-9523
Corps De Raccord

143029523
NO PRIMARY REF14-302-9523: RNCC: 3 | RNVC: 2
48J36: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-314-5997
Tube To Boss Straight Adapter

143145997
501-729-022-0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-301-0177
Tube Coupling

143010177
121E71-313-12-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-471-9425
Diaphragmes Apparie

144719425
GA71269: RNCC: 3 | RNVC: 2

28 Sep 1994

4730-14-378-4884

4730-14-306-6104
Bride De Raccord

143066104
S2867-2: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-451-1625
Fluid Flow Restrictor

144511625
170928: RNCC: 3 | RNVC: 2
SYQ1684: RNCC: 5 | RNVC: 2

6 Nov 1991

4730-14-451-3818
Tube Tee

144513818
333266: RNCC: 3 | RNVC: 2

15 Nov 1991

4730-14-275-1436

4730-14-334-0947

4730-14-298-8807

4730-14-571-9474
Pipe Flange

145719474
BM 0217: RNCC: 3 | RNVC: 2

25 May 2012

4730-14-526-6495
Tube Coupling

145266495
5005030448: RNCC: 3 | RNVC: 2

13 Aug 2001

4730-14-395-3679
Embout A Souder

143953679
N0189F87A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-404-4028
Tube Union

144044028
341GCU18-3/4: RNCC: 3 | RNVC: 2

30 Oct 1985

4730-14-553-4221
Quick Disconnect Coupling Half

145534221
6-FCD-4-PM-SS: RNCC: 3 | RNVC: 2

3 Apr 2007

4730-14-286-8546
Sediment Strainer Body

142868546
331-2: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-525-7928
Tube To Boss Straight Adapter

145257928
F145354: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-512-9163
Tube Coupling

145129163
562408: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-448-5000
Flexible Tube Coupling Assembly

144485000
590862-1: RNCC: 3 | RNVC: 9

26 Jun 1991

4730-14-418-6389
Tube To Boss Straight Adapter

144186389
F3BRAB8-1/8: RNCC: 3 | RNVC: 2
F3BRAB8-1/8: RNCC: 3 | RNVC: 9

8 Sep 1987

4730-14-234-9384
Col De Cygne Pour B

142349384
7062RFF2-2-80CA: RNCC: 3 | RNVC: 9

1 Jan 1967

4730-14-248-5144

4730-14-251-4469
Mamelon De Raccorde

142514469
053.842.000: RNCC: 3 | RNVC: 2
53-851-0AU53-854-0: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-569-3771
Quick Disconnect Coupling Half

145693771
N00228993: RNCC: 3 | RNVC: 2
N 002 28993: RNCC: 5 | RNVC: 1

8 Sep 2011

4730-14-499-4743
Fluid Passage Bolt

144994743
2-567091-0: RNCC: 3 | RNVC: 2
25670910: RNCC: 3 | RNVC: 2
F300 0T 022 7742: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-441-1840
Tube To Gas Fitting Straight Adapter

144411840
66661-6-4: RNCC: 3 | RNVC: 2
91631244: RNCC: 5 | RNVC: 2

22 Aug 1990

4730-14-447-8721
Bulkhead Hose Connector

144478721
WGBTXS10-1-4: RNCC: 3 | RNVC: 2
91714587: RNCC: 5 | RNVC: 2

6 Jun 1991

4730-14-466-8441
Pipe To Tube Straight Adapter

144668441
G202208-10-8B: RNCC: 3 | RNVC: 2

3 Dec 1993

4730-14-462-1385
Quick-Disconnect Nipple

144621385
FH152-990-06: RNCC: 3 | RNVC: 2

6 Apr 1993

4730-14-383-8720
Swivel Retaining Pipe Flange

143838720
U1198-57CUPR0ALU: RNCC: 3 | RNVC: 2
U1198-57CUPR0ALU: RNCC: 5 | RNVC: 2

11 Apr 1983

4730-14-268-1176
Fluid Flow Restrictor Unit

142681176
6784-1CI8: RNCC: 2 | RNVC: 2
MEC11357: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-371-4796
Tube To Boss Straight Adapter

143714796
P4-1DM14-12-17CYL: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-488-2043
Tube To Boss Straight Adapter

144882043
0104 501 000: RNCC: 3 | RNVC: 2
LV117-CS0604S: RNCC: 5 | RNVC: 2
UMCA6X8-13S: RNCC: 5 | RNVC: 2

23 Apr 1997

4730-14-372-5111
Raccord Equipe

143725111
MAT201-02-00-0: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-469-4235
Pipe Expansion Joint

144694235
3-1-93-0170: RNCC: 3 | RNVC: 2
RAB3233: RNCC: 5 | RNVC: 2

22 Apr 1994

4730-14-243-7584
Adaptateur Embarque

142437584
DNAR460-80X2 1-2: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-299-6050

4730-14-342-2197

4730-14-350-5512
Raccord Fond

143505512
1-98450: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-552-8980
Tube Union

145528980
5010049046: RNCC: 3 | RNVC: 2

12 Feb 2007

4730-14-570-7064
Tube Elbow

145707064
D200 05B: RNCC: 3 | RNVC: 2
003283: RNCC: 5 | RNVC: 2

18 Jan 2012

4730-14-565-0237
Sediment Strainer Element

145650237
FL176: RNCC: 3 | RNVC: 2

30 Jun 2010

4730-14-407-1296
Reducteur Raccord

144071296
EMB580REPERE9: RNCC: 3 | RNVC: 2

5 Feb 1986

4730-14-475-3816
Remplissage Raccord

144753816
5554-000: RNCC: 3 | RNVC: 9
301-971-104-0: RNCC: 5 | RNVC: 2

4 Apr 1995

4730-14-455-3794
Quick Disconnect Coupling Half

144553794
RBE06-2810-0DIA9JV: RNCC: 3 | RNVC: 2
91726927: RNCC: 5 | RNVC: 2

21 May 1992

4730-14-203-6470
Raccord Vabco

142036470
UMA38-1-1-4C0: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-242-8104
Tube Union

142428104
NO PRIMARY REF14-242-8104: RNCC: 3 | RNVC: 2
494 1-4: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-416-3871
Sediment Strainer Element

144163871
ST08-33-05DN450REP3: RNCC: 3 | RNVC: 2
ST08-33-05DN450REP3: RNCC: 5 | RNVC: 9

9 Jun 1987

4730-14-365-2616
Tube To Boss Straight Adapter

143652616
366A72-1007-20: RNCC: 3 | RNVC: 2

19 Sep 1980

4730-14-441-7203
Fluid Passage Bolt

144417203
84425-16: RNCC: 1 | RNVC: 2
RA13216: RNCC: 3 | RNVC: 2

12 Sep 1990

4730-14-346-4565
Tube Tee

143464565
PZCA344: RNCC: 3 | RNVC: 2
U70554: RNCC: 5 | RNVC: 9
85-693-4264: RNCC: 6 | RNVC: 9

12 Dec 1977

4730-14-405-2084
Quick Disconnect Coupling Assembly

144052084
E29573-16LAIT0N: RNCC: 2 | RNVC: 2

27 Nov 1985

4730-14-377-8796
Tube To Boss Straight Adapter

143778796
NO PRIMARY REF14-377-8796: RNCC: 3 | RNVC: 2
14844REPG: RNCC: 5 | RNVC: 9
RE03-0180: RNCC: 5 | RNVC: 9

10 Jun 1982

4730-14-228-6808
Tube Tee

142286808
GSM1297FD3-1TABLEAU2D1-25PASAGA-: RNCC: 3 | RNVC: 1

1 Jan 1966

4730-14-320-7664
Tube To Boss Straight Adapter

143207664
A11-72139: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-536-6708
Tube To Boss Straight Adapter

145366708
IC2086-14-04: RNCC: 3 | RNVC: 2

10 Sep 2003

4730-14-446-3945
Quick Disconnect Coupling Half

144463945
RBE06-2101/OD/IA/HP/VS: RNCC: 3 | RNVC: 2
RBE06-2101/IA/VS/OD/HP: RNCC: 5 | RNVC: 2

19 Mar 1991

4730-14-416-9029
Tube Tee

144169029
F521-06820: RNCC: 3 | RNVC: 2

25 Jun 1987

4730-14-338-1630
Quick Disconnect Plug

143381630
NO PRIMARY REF14-338-1630: RNCC: 3 | RNVC: 2
34-30X35: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-412-0673
Quick Disconnect Coupling Half

144120673
RBE08-1152IAHPFB: RNCC: 3 | RNVC: 2
RBE08-1152HPFB: RNCC: 5 | RNVC: 2

30 Sep 1986

4730-14-501-2355
Tube To Boss Straight Adapter

145012355
471-048: RNCC: 3 | RNVC: 2
471.048: RNCC: 3 | RNVC: 2
F300 0T 025 2760: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-355-9139
Pipe Flange

143559139
FTBK36X1-5X65X72: RNCC: 3 | RNVC: 2
P01233-39: RNCC: 5 | RNVC: 2

5 Apr 1979

4730-14-242-7990
Tube Tee

142427990
NG40901-4APL85N0M1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-406-7185
Tube To Boss Straight Adapter

144067185
GE6-12SRED: RNCC: 3 | RNVC: 2
GE6-12SRED: RNCC: 5 | RNVC: 2

8 Jan 1986

4730-14-290-2284
Fluid Pressure Line Multiple Connector

142902284
330A55-9805-00: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-511-6612
Quick Disconnect Coupling Half

145116612
NC4014010: RNCC: 3 | RNVC: 2

8 Jan 1999

4730-14-522-6213
Quick Disconnect Coupling Half

145226213
1527.47125C: RNCC: 3 | RNVC: 2
021078: RNCC: 3 | RNVC: 2
21078: RNCC: 5 | RNVC: 2
021078: RNCC: 5 | RNVC: 9

8 Nov 2000

4730-14-387-8448
Pipe Flange

143878448
NO PRIMARY REF14-387-8448: RNCC: 3 | RNVC: 2
0005-501DN300: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-522-0518
Tube To Boss Straight Adapter

145220518
270310030: RNCC: 3 | RNVC: 2
SAX270310030: RNCC: 5 | RNVC: 9

2 Oct 2000

4730-14-452-9734
Sediment Strainer Element

144529734
200-50-5X40CQ: RNCC: 3 | RNVC: 2

29 Jan 1992

4730-14-349-2187
Tube To Boss Straight Adapter

143492187
12-14-5-10C0NU: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-518-2096
Hose To Boss Straight Adapter

145182096
307-861-502-0: RNCC: 3 | RNVC: 2

26 Jan 2000

4730-14-445-8598
Bulkhead Hose Connector

144458598
0294300540: RNCC: 3 | RNVC: 2
302-258-601-0: RNCC: 5 | RNVC: 2

27 Feb 1991

4730-14-530-9312
Flexible Tube Coupling Assembly

145309312
SMC-S-16682-010-0: RNCC: 3 | RNVC: 2

17 Jul 2002

4730-14-204-3397
Bride Equipee

142043397
M3C506-20: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-557-0818
Tube Tee

145570818
MAT425-3009: RNCC: 3 | RNVC: 2

6 May 2008

4730-14-234-9386
Raccord Et Col De C

142349386
7062RAF2-3-150A42: RNCC: 3 | RNVC: 9

1 Jan 1967

4730-14-576-1241
Hose Clamp

145761241
ABS2052A01C: RNCC: 1 | RNVC: 2
ABS2052A01C: RNCC: 3 | RNVC: 2
ABS2052A01C: RNCC: 3 | RNVC: 9
ABS2052A01C: RNCC: 5 | RNVC: 2

30 May 2013

4730-14-347-5972

4730-14-336-0648

4730-14-434-6951
Adaptateur Bride

144346951
BN329515C2DN200INOX: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-296-7121

4730-14-212-1191

4730-14-292-1799

4730-14-573-2588
Tube To Hose Straight Adapter

145732588
1DC27185: RNCC: 3 | RNVC: 2

26 Sep 2012

4730-14-365-9459

4730-14-565-1646
Hose Clamp

145651646
CI002: RNCC: 3 | RNVC: 2

20 Jul 2010

4730-14-340-0026
Ebauche Du Corps

143400026
401MA0401R1F6: RNCC: 3 | RNVC: 2
401MA401R1F6: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-292-1996
Bouteille De Purge

142921996
AS34TP3A: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-314-1885

Load More Results