What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 124 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 124 of 185

4730-14-463-2494
Manchette Double

144632494
LN326-056-12DN20: RNCC: 3 | RNVC: 2

2 Jun 1993

4730-14-268-1219
Pipe Flange

142681219
6784-1DG110-63: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-504-0371
Self-Sealing Coupling Half

145040371
704A34-421-033: RNCC: 1 | RNVC: 2
9949443: RNCC: 3 | RNVC: 2
9949443A: RNCC: 5 | RNVC: 2

4 Feb 1998

4730-14-445-8284
Tube Tee

144458284
721-200-138: RNCC: 3 | RNVC: 2

27 Feb 1991

4730-14-273-5053
Tube To Boss Straight Adapter

142735053
7062BA1RCET1-10UE10Z1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-540-7308
Anchor And Reinforcement Pipe Clamp

145407308
38051287: RNCC: 3 | RNVC: 2
320507: RNCC: 5 | RNVC: 2
4848ZG8613181141: RNCC: 6 | RNVC: 9

22 Apr 2004

4730-14-427-8481
Fluid Pressure Line Multiple Connector

144278481
053.489.000: RNCC: 3 | RNVC: 2
053489000: RNCC: 5 | RNVC: 9

17 Nov 1988

4730-14-217-3586
Tube Coupling Assembly

142173586
3951S32X25X32A: RNCC: 3 | RNVC: 2
3951S32X25X32A: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-547-5599
Bulkhead Hose Connector

145475599
RA1B533303160: RNCC: 3 | RNVC: 2

15 Oct 2005

4730-14-504-9013
Pipeline Flexible Spacer

145049013
DILATOFLEX-K-GZ-DN25PN16: RNCC: 3 | RNVC: 2
A1/25/KG310-WG/P/PN16: RNCC: 3 | RNVC: 2
ERV25-10JAUNE: RNCC: 3 | RNVC: 2
ERV-JAUNE-DN25PN16: RNCC: 3 | RNVC: 9
7-90-2-02-02REP18: RNCC: 5 | RNVC: 2
SYQ4446: RNCC: 5 | RNVC: 2

11 Mar 1998

4730-14-388-1577
Tube Union

143881577
EN10242-U1-1 1/4-FE-A: RNCC: 2 | RNVC: 2
770330107: RNCC: 3 | RNVC: 2
330-1 1-4: RNCC: 5 | RNVC: 2
770 330 107: RNCC: 5 | RNVC: 2
E29801U1G: RNCC: 5 | RNVC: 9
251-1 1-4: RNCC: 5 | RNVC: 9
330-1 1-4: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-464-1735
Flange To Flange Straight Adapter

144641735
045275-03133: RNCC: 3 | RNVC: 2
RAB1447: RNCC: 5 | RNVC: 2

21 Jul 1993

4730-14-406-9760
Tube Fitting Clinch Sleeve

144069760
E05377-44: RNCC: 3 | RNVC: 2
DAG33S: RNCC: 3 | RNVC: 2
LV001NS33S: RNCC: 3 | RNVC: 2

22 Jan 1986

4730-14-324-1274
Tube Tee

143241274
Q1-5TR14X20X14NN: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-339-1072
Tube To Boss Straight Adapter

143391072
GSM514-001F40: RNCC: 3 | RNVC: 2
411MA267F12: RNCC: 5 | RNVC: 2
GSM514-01F40: RNCC: 5 | RNVC: 2

17 Dec 1976

4730-14-333-5095
Sous Ensemble Bride

143335095
GSM166-005F27: RNCC: 3 | RNVC: 2
GSM166-05F27: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-468-4433
Fluid Passage Bolt

144684433
NO PRIMARY REF14-468-4433: RNCC: 3 | RNVC: 2
14810002: RNCC: 5 | RNVC: 9
VCM8/100: RNCC: 5 | RNVC: 9

2 Mar 1994

4730-14-400-7094
Pipe Flange

144007094
J05085-04-0200P030: RNCC: 3 | RNVC: 2

8 May 1985

4730-14-324-0892
Raccord Coude

143240892
A0182-066F15: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-374-4462
Bride Speciale

143744462
MX69REP1: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-268-1215
Pipe Flange

142681215
6784-1DG80-63: RNCC: 2 | RNVC: 2
MEC11213: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-316-5477
Tube To Boss Straight Adapter

143165477
3210-32-31-925: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-347-7575
Tube To Boss Straight Adapter

143477575
GSM524-038F21: RNCC: 3 | RNVC: 2
A0348-001F22: RNCC: 5 | RNVC: 2

1 Mar 1978

4730-14-495-8851
Anchor And Reinforcement Pipe Clamp

144958851
NO PRIMARY REF14-495-8851: RNCC: 3 | RNVC: 2
011050030000: RNCC: 5 | RNVC: 2
F300 0T 020 4215: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-572-7451
Pipe Expansion Joint

145727451
FR-26042800018: RNCC: 3 | RNVC: 2
26042800018: RNCC: 5 | RNVC: 2

30 Jul 2012

4730-14-302-9921
Tube To Boss Straight Adapter

143029921
7062BB1B1966VCPT2-48UA9C337: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-344-5277
Tube To Boss Straight Adapter

143445277
MAT1: RNCC: 3 | RNVC: 2
85-688-2871: RNCC: 6 | RNVC: 9

10 Aug 1977

4730-14-378-1276
Pipe Flange

143781276
BN324-556REP1: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-333-3925
Tube To Boss Straight Adapter

143333925
NO PRIMARY REF14-333-3925: RNCC: 3 | RNVC: 2
C18EG0011-015: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-321-1834
Sediment Strainer Element

143211834
250-50-23X5IN0X: RNCC: 3 | RNVC: 2
85-686-8596: RNCC: 6 | RNVC: 9

1 Jan 1975

4730-14-246-6362
Tube Fitting Clinch Sleeve

142466362
Q1-605-41: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-366-1860
Fluid Pressure Line Multiple Connector

143661860
76320B: RNCC: 3 | RNVC: 2
85-800-6466: RNCC: 6 | RNVC: 9

4 Nov 1980

4730-14-446-2418
Tube To Boss Straight Adapter

144462418
LV114-CP2716N: RNCC: 3 | RNVC: 2
UMAG27X26-34N: RNCC: 5 | RNVC: 2

11 Mar 1991

4730-14-290-9485
Bulkhead Hose Connector

142909485
000MA1050F28REPPM48-1: RNCC: 3 | RNVC: 2
000MA022F45REPPM48-1: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-337-0884

4730-14-462-6090
Self-Sealing Coupling Assembly Parts Kit

144626090
920440-2: RNCC: 3 | RNVC: 2

28 Apr 1993

4730-14-554-0082
Tube-Pipe Fitting Kit

145540082
S.840146: RNCC: 3 | RNVC: 2

7 Jun 2007

4730-14-366-8947
Fluid Pressure Line Multiple Connector

143668947
00 119 710 04: RNCC: 3 | RNVC: 2
10029-710-4: RNCC: 5 | RNVC: 9

11 Dec 1980

4730-14-300-9386
Flexible Tube Coupling Assembly

143009386
E32.0.3: RNCC: 3 | RNVC: 2
E32-0-3: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-365-9788

4730-14-365-9468

4730-14-031-7813

4730-14-283-4411
Reducteur Equipe

142834411
4112: RNCC: 3 | RNVC: 9

1 Jan 1972

4730-14-471-4663
Fluid-Emulsion Spray Nozzle

144714663
3/4FF-SS18: RNCC: 3 | RNVC: 2
155621: RNCC: 5 | RNVC: 2

30 Aug 1994

4730-14-424-7078
Demontage R Bouchon

4730-14-367-7927

4730-14-543-3438
Threaded Tube Fitting Plug

145433438
BM 1P1/4: RNCC: 3 | RNVC: 2
FS0003187: RNCC: 6 | RNVC: 9

21 Oct 2004

4730-14-269-1917
Pipe Flange

142691917
7066CE1M44-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-346-6091
Filtre Special

143466091
2-19870: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-405-4419
Tube Coupling

144054419
CB2A10 1/2: RNCC: 3 | RNVC: 9

27 Nov 1985

4730-14-572-9723
Hose Tee

145729723
7421052595: RNCC: 1 | RNVC: 2
0761 0018 015 A: RNCC: 3 | RNVC: 2
21052595: RNCC: 5 | RNVC: 2

31 Aug 2012

4730-14-251-9992
Tube To Boss Straight Adapter

142519992
9C0-4-6G3-8LAIT0N: RNCC: 3 | RNVC: 2
9C0-4-6G3-8LAIT0N: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-451-3804
Tube To Boss Straight Adapter

144513804
333006: RNCC: 3 | RNVC: 2

15 Nov 1991

4730-14-433-1518
Quick-Disconnect Nipple

144331518
291299001: RNCC: 3 | RNVC: 2
29 129 9001: RNCC: 5 | RNVC: 9

11 Jul 1989

4730-14-480-4624
Quick Disconnect Coupling Assembly

144804624
AE99144M: RNCC: 3 | RNVC: 2
AE99144M: RNCC: 5 | RNVC: 9

13 Mar 1996

4730-14-453-2817
Hydraulic Manifold Assembly

144532817
10270-177: RNCC: 3 | RNVC: 9
89411518: RNCC: 5 | RNVC: 2

12 Feb 1992

4730-14-429-5811
Bulkhead Hose Connector

144295811
3A12LCL10NU: RNCC: 3 | RNVC: 2
2803131301: RNCC: 5 | RNVC: 2
5005030032: RNCC: 5 | RNVC: 2
5005030032: RNCC: 6 | RNVC: 9

1 Feb 1989

4730-14-271-0945
Obturateur Raccord

142710945
AQ8-0A: RNCC: 3 | RNVC: 2
501-716-544-0: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-279-5615
Self-Sealing Coupling Half

142795615
9949213A: RNCC: 3 | RNVC: 2
9949213: RNCC: 5 | RNVC: 2
9-94-92-13A: RNCC: 5 | RNVC: 9
TAH155S5-712-8: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-212-1218
Pipe Flange

142121218
BN320-573-25F2-4: RNCC: 3 | RNVC: 2

5 Jul 1980

4730-14-416-9026
Bulkhead Hose Connector

144169026
F521-06-15: RNCC: 3 | RNVC: 2

25 Jun 1987

4730-14-222-3254

4730-14-328-0609
Raccord Orientable

143280609
PT676-3B: RNCC: 3 | RNVC: 2
PT676-3: RNCC: 5 | RNVC: 2
PT676-3: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-576-0044
Hose Nipple

145760044
XBGSV 16 S AVEC GM ZN FER NOIR: RNCC: 3 | RNVC: 2
109791H: RNCC: 5 | RNVC: 2
4265.701: RNCC: 5 | RNVC: 2
Y00014165: RNCC: 5 | RNVC: 2

22 May 2013

4730-14-254-7846
Fluid Passage Bolt

142547846
NO PRIMARY REF14-254-7846: RNCC: 3 | RNVC: 2
417808: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-414-6822
Threaded Tube Fitting Plug

144146822
4730HK-BSC21,3: RNCC: 2 | RNVC: 2
MEC10521: RNCC: 3 | RNVC: 2

24 Feb 1987

4730-14-408-2551
Tube Tee

144082551
42100A50-1: RNCC: 3 | RNVC: 2
42100A50-1: RNCC: 5 | RNVC: 2

19 Mar 1986

4730-14-278-3099
Tube To Boss Straight Adapter

142783099
10 8-10XM14X1-5: RNCC: 3 | RNVC: 2
10 8-10XM14X1-5: RNCC: 3 | RNVC: 2
0946677526: RNCC: 5 | RNVC: 2
946677526: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-479-2166
Flange To Hose Straight Adapter

144792166
23626977-6: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-514-9904
Tube To Boss Swivel Joint

145149904
M 2605 K15 AGJ 20: RNCC: 3 | RNVC: 2
M2605K15AGJ20: RNCC: 5 | RNVC: 2

25 Jun 1999

4730-14-347-9473
Tube Tee

143479473
1TR8X6X6NUP1204-6-10X100: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-320-3055
Pipe Flange

143203055
0064771480: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-386-4237
Tube To Boss Straight Adapter

143864237
UML8 1-4WCD: RNCC: 3 | RNVC: 9

24 Aug 1983

4730-14-564-5748
Tube Tee

145645748
T42LCFX: RNCC: 3 | RNVC: 2
A231004000332: RNCC: 5 | RNVC: 2

7 May 2010

4730-14-571-8032
Tube Elbow

145718032
3102 08 10: RNCC: 3 | RNVC: 2

11 May 2012

4730-14-339-9950
Ebauche Du Corps

143399950
401MA0394R1F4: RNCC: 3 | RNVC: 2
401MA394R1F4: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-323-0250

4730-14-268-5165

4730-14-281-0546

4730-14-496-9875
Fluid Pressure Line Multiple Connector

144969875
NO PRIMARY REF14-496-9875: RNCC: 3 | RNVC: 2
50-4809: RNCC: 5 | RNVC: 9
F300 0T 022 3955: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-359-5857
Tube To Boss Straight Adapter

143595857
42-30-33X200NU: RNCC: 3 | RNVC: 2
5000496377: RNCC: 5 | RNVC: 2
5000496377: RNCC: 5 | RNVC: 9
5000496377: RNCC: 6 | RNVC: 9

15 Oct 1979

4730-14-420-0110
Tube Union

144200110
5A20-21-27CYL: RNCC: 3 | RNVC: 2
5A20-21-27CYL: RNCC: 3 | RNVC: 9
205101396: RNCC: 5 | RNVC: 2
121595: RNCC: 5 | RNVC: 2
ORSA20-20-27N: RNCC: 5 | RNVC: 9
AA20X20-27N: RNCC: 5 | RNVC: 9
417519: RNCC: 5 | RNVC: 9

17 Nov 1987

4730-14-378-4571
Fluid Passage Bolt

143784571
785-109: RNCC: 3 | RNVC: 2
89138022: RNCC: 5 | RNVC: 2

11 Aug 1982

4730-14-382-2858
Threaded Tube Fitting Plug

143822858
NO PRIMARY REF14-382-2858: RNCC: 3 | RNVC: 2
4297DN20: RNCC: 5 | RNVC: 9

17 Feb 1983

4730-14-408-7417
Quick Disconnect Coupling Half

144087417
RBE06-2806-0DIAVDEBDKV: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-338-2504
Tube Fitting Brazing Ferrule

143382504
U1198F5-48-3UE8: RNCC: 2 | RNVC: 2
CN4: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-578-7233
Tube Elbow

145787233
ABS1287-24: RNCC: 1 | RNVC: 2
ABS1287-24: RNCC: 3 | RNVC: 2
ABS1287-24: RNCC: 5 | RNVC: 2

2 Jan 2014

4730-14-486-2076
Tube To Boss Straight Adapter

144862076
64779-2: RNCC: 3 | RNVC: 2

5 Mar 1997

4730-14-306-7688
Bride A Zinc

143067688
000MA0781F5REP2DN50: RNCC: 3 | RNVC: 2
000MA781F5REP2DN50: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-399-8506
Tubulure Equipee

143998506
2-37844: RNCC: 3 | RNVC: 2

28 Mar 1985

4730-14-395-3671
Embout A Souder

143953671
N0189F27A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-349-5339

4730-14-254-7344

4730-14-371-0470

4730-14-560-9435
Fluid Passage Bolt

145609435
1390843: RNCC: 3 | RNVC: 2

3 Jun 2009

4730-14-562-6827
Hose Coupling

145626827
3-23609A-32D: RNCC: 3 | RNVC: 2

13 Nov 2009

4730-14-504-5554
Quick Disconnect Coupling Half

145045554
RBE06-6102/IC-3: RNCC: 3 | RNVC: 2

19 Feb 1998

4730-14-262-1585
Pipe Flange

142621585
7062DJ1F1M108-5-14CD2-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-348-8488

4730-14-348-6457

4730-14-217-2862
Buse

142172862
S2171: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-206-1047

4730-14-376-7620
Tube To Boss Straight Adapter

143767620
1081190013: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-419-1840
Quick Disconnect Coupling Half

144191840
NO PRIMARY REF14-419-1840: RNCC: 3 | RNVC: 2
QST12/05: RNCC: 5 | RNVC: 9

12 Oct 1987

4730-14-293-3445
Bulkhead Hose Connector

142933445
121E52-139-00-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-421-8868
Pipe Flange

144218868
9801-42-51: RNCC: 3 | RNVC: 2
98014251: RNCC: 3 | RNVC: 2
9801-42-51: RNCC: 3 | RNVC: 2

9 Feb 1988

4730-14-333-4043
Tube Coupling

143334043
0-3751S10A: RNCC: 3 | RNVC: 2
0-3751S10A: RNCC: 5 | RNVC: 9
85-688-9406: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-387-8916
Tube To Boss Straight Adapter

143878916
P161D0808S: RNCC: 3 | RNVC: 2
721.D.08.08S: RNCC: 3 | RNVC: 2
74721D0808S: RNCC: 5 | RNVC: 2
74721D0808S: RNCC: 5 | RNVC: 2
721 D 08 08S: RNCC: 5 | RNVC: 2
721D08 08S: RNCC: 5 | RNVC: 2
721D08-08S: RNCC: 5 | RNVC: 2
721D0808S: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-339-9921
Bride A Zinc

143399921
GSM147-005F23: RNCC: 3 | RNVC: 2
GSM147-05F23: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-417-4823
Multiple Raccord

144174823
DA2C781210A1: RNCC: 3 | RNVC: 2

8 Jul 1987

4730-14-206-1001

4730-14-217-2870

4730-14-223-8705

4730-14-385-7474
Tube To Boss Straight Adapter

143857474
G190463-12S: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-376-5180
Tube To Boss Straight Adapter

143765180
NO PRIMARY REF14-376-5180: RNCC: 3 | RNVC: 2
404188240: RNCC: 5 | RNVC: 2
404188240: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-032-3162
Tube To Boss Straight Adapter

140323162
Q1-5GE10LR8-13CYLEQUIPE: RNCC: 3 | RNVC: 2

6 Sep 1982

4730-14-244-0291
Tube Tee

142440291
NG41000-30PL1: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-420-6231
Tube Tee

144206231
T0RAG13X12-17N: RNCC: 3 | RNVC: 2
105BAG13-12-17CYL: RNCC: 3 | RNVC: 2
460-058: RNCC: 5 | RNVC: 2

16 Dec 1987

4730-14-273-5217
Pipe Flange

142735217
7062TB1F1-121-3UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-484-9974
Pipe To Tube Straight Adapter

144849974
U1778-N41-16-082: RNCC: 3 | RNVC: 2
N41-16-082: RNCC: 5 | RNVC: 2

19 Dec 1996

4730-14-490-5557
Quick Disconnect Coupling Half

144905557
J05085-04-0900P005: RNCC: 3 | RNVC: 2

2 Oct 1997

4730-14-562-5392
Pipeline Flexible Spacer

145625392
0429048: RNCC: 3 | RNVC: 2
A1/ 250/ KR320-WG/ P: RNCC: 3 | RNVC: 2

3 Nov 2009

4730-14-423-7563
Double Mamelon

144237563
117547-1: RNCC: 3 | RNVC: 2

28 Apr 1988

4730-14-217-5061

4730-14-486-6352

4730-14-399-9091
Tube Union

143999091
PZCF268: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-229-8892

4730-14-230-1066

4730-14-569-0591
Pipe Expansion Joint

145690591
720773: RNCC: 3 | RNVC: 2
X0150044: RNCC: 5 | RNVC: 2

2 Aug 2011

4730-14-263-7918
Bouchon De Vidange

142637918
DLT002988: RNCC: 3 | RNVC: 2
DLT002988: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-367-0320

4730-14-246-2069

4730-14-326-1894

4730-14-400-4491
Fluid Passage Bolt

144004491
2-535535-3: RNCC: 3 | RNVC: 2
2-535535-3: RNCC: 5 | RNVC: 9

24 Apr 1985

4730-14-260-4181
Self-Sealing Coupling Assembly

142604181
A24573-1: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-520-9595
Tube To Gas Fitting Straight Adapter

145209595
8-4F63MXS: RNCC: 3 | RNVC: 2
8-4F63MXS: RNCC: 3 | RNVC: 9

26 Jun 2000

4730-14-571-4163
Pipe To Hose Straight Adapter

145714163
0403182230-A: RNCC: 3 | RNVC: 2

22 Mar 2012

4730-14-396-7695
Prise De Pression

143967695
01-01-00005: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-566-6483
Tube Reducer

145666483
RED28/12LOMDCF: RNCC: 3 | RNVC: 2
A231004000366: RNCC: 5 | RNVC: 2

2 Dec 2010

4730-14-270-5582

4730-14-416-3305
Pipe Flange

144163305
E29203-01A-PN10DN400Z2CND17-12: RNCC: 2 | RNVC: 2

3 Jun 1987

4730-14-334-1304
Fluid Pressure Line Multiple Connector

143341304
880-52-0-273-0: RNCC: 3 | RNVC: 2

23 Apr 1976

4730-14-302-5228
Bride Fixation Tube

143025228
330A21-0254-01: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-468-3916
Tube Union

144683916
F9BPB4M12X1-5C0: RNCC: 3 | RNVC: 2
91632279: RNCC: 5 | RNVC: 2
5005330018: RNCC: 5 | RNVC: 2

23 Feb 1994

4730-14-281-2727
Tube To Boss Straight Adapter

142812727
121E26-600-16-0: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-308-0413

4730-14-269-5108

4730-14-346-6773

4730-14-329-7591
Corps De Raccord

143297591
5-3601H50A: RNCC: 3 | RNVC: 2
5-3601H50A: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-341-6483
Fluid Pressure Line Multiple Connector

143416483
8472098810: RNCC: 3 | RNVC: 2
209881: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-269-1914
Pipe Flange

142691914
7066CE1M25: RNCC: 2 | RNVC: 2
4730BC-25M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-280-6657
Bulkhead Hose Connector

142806657
272285: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-434-2919
Fluid Pressure Line Multiple Connector

144342919
562525: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-515-3848
Tube To Boss Straight Adapter

145153848
6200063: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-560-5631
Hose Coupling

145605631
XAGEV 12 LR 3/8 EDZB: RNCC: 3 | RNVC: 2
H3737530: RNCC: 5 | RNVC: 2
CV150543: RNCC: 5 | RNVC: 2
H3737530: RNCC: 5 | RNVC: 2

30 Apr 2009

4730-14-562-8872
Tube To Hose Straight Adapter

145628872
9049465: RNCC: 3 | RNVC: 2

2 Dec 2009

4730-14-399-3967

4730-14-240-1253

4730-14-227-0463

4730-14-275-9893
Raccord Pivotant

142759893
B1-2TAILLE8: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-240-8317
Raccord Special

142408317
NO PRIMARY REF14-240-8317: RNCC: 3 | RNVC: 2
745: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-041-2475
Bulkhead Hose Connector

140412475
N410-126: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-426-7413
Tube Tee

144267413
4730HEING021,3X2-17,2X2: RNCC: 2 | RNVC: 2

20 Sep 1988

4730-14-426-7699
Tube Tee

144267699
4730HEING048,3X7,1-26,9X3,6: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-384-4982
Self-Sealing Coupling Half

143844982
9949682: RNCC: 3 | RNVC: 2
9-94-96-82: RNCC: 5 | RNVC: 2
9949682: RNCC: 5 | RNVC: 9

4 May 1983

4730-14-343-5149
Fluid Pressure Line Multiple Connector

143435149
610-18NEKD01: RNCC: 3 | RNVC: 2
501-730-579-0: RNCC: 5 | RNVC: 2

16 Jun 1977

4730-14-457-8763
Tube Tee

144578763
770 130 104: RNCC: 3 | RNVC: 2
130-1-2ZN: RNCC: 5 | RNVC: 2
85-694-3896: RNCC: 6 | RNVC: 9

24 Sep 1992

4730-14-365-3461

4730-14-334-1306

4730-14-212-3147
Corps De Tubulure S

142123147
A15114-2: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-497-1935
Union

144971935
F3MB8-1-8: RNCC: 3 | RNVC: 2
F300 0T 022 8056: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-306-7693
Bride A Zinc

143067693
000MA0781F5REP1DN100: RNCC: 3 | RNVC: 2
000MA781F5REP1DN100: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-541-4312
Pipe Flange

145414312
L74446-24: RNCC: 3 | RNVC: 2
4848ZZ7083480002: RNCC: 6 | RNVC: 9

9 Jun 2004

4730-14-277-6545
Pipe Flange

142776545
6784-1CC20-6: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-562-5937
Pipeline Flexible Spacer

145625937
R1/150/KR 320-WG/P: RNCC: 3 | RNVC: 2

5 Nov 2009

4730-14-333-5174
Barillet A 6 Voies

143335174
GSM163-007BF31: RNCC: 3 | RNVC: 2
GSM163-07BF31: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-381-4885
Fluid Pressure Line Multiple Connector

143814885
3100771-9: RNCC: 3 | RNVC: 2
BBZ4125: RNCC: 5 | RNVC: 2
0224888: RNCC: 5 | RNVC: 2
3277442-4: RNCC: 5 | RNVC: 2
5-73-224888: RNCC: 5 | RNVC: 9
70224888-1: RNCC: 5 | RNVC: 9

25 Jan 1983

4730-14-569-4004
Quick Disconnect Plug

145694004
FIGURE902-INOX-DN50: RNCC: 3 | RNVC: 2
902-INOX-DN50: RNCC: 5 | RNVC: 2
FIG.902-INOX-DN50: RNCC: 5 | RNVC: 2

12 Sep 2011

4730-14-325-3474
Raccord Orientable

143253474
Q509-10JE16X150: RNCC: 3 | RNVC: 2
R35274SMDET54: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-342-7658
Bouchon Obturateur

143427658
NG414-01-28MALE: RNCC: 3 | RNVC: 2

16 May 1977

4730-14-211-0449
Raccord Orientable

142110449
309-4NN: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-567-1983
Hose Clamp

145671983
719232: RNCC: 3 | RNVC: 2

21 Feb 2011

4730-14-279-5585
Tube To Boss Straight Adapter

142795585
9952333A: RNCC: 3 | RNVC: 2
9952333: RNCC: 5 | RNVC: 2
9-95-23-33A: RNCC: 5 | RNVC: 9
TAHM1136-6: RNCC: 5 | RNVC: 9
9-95-23-33: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-390-4421
Pipe Expansion Joint

143904421
NO PRIMARY REF14-390-4421: RNCC: 3 | RNVC: 2
M9500-2: RNCC: 5 | RNVC: 9

26 Jan 1984

4730-14-453-5117
Fluid Pressure Line Multiple Connector

144535117
DIV329-6: RNCC: 3 | RNVC: 2
RAR1471: RNCC: 5 | RNVC: 2

25 Feb 1992

4730-14-262-2212
Sediment Strainer Element

142622212
5550-3: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-340-9410
Tube To Boss Straight Adapter

143409410
RT11326-4: RNCC: 3 | RNVC: 2

30 Oct 2001

4730-14-503-9334
Clapet De Decharge

4730-14-261-6826

4730-14-344-5755

4730-14-388-9307
Tube Coupling

143889307
39086059: RNCC: 3 | RNVC: 2
39086059: RNCC: 5 | RNVC: 9

29 Nov 1983

4730-14-375-7116
Tube To Boss Straight Adapter

143757116
4730AJ4.3DN30EQUIPE: RNCC: 2 | RNVC: 2
8401303466: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-383-1297
Fluid Pressure Line Multiple Connector

143831297
103112300301: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-378-9347
Fluid Passage Bolt

143789347
P109370D: RNCC: 3 | RNVC: 2

6 Sep 1982

4730-14-399-3321
Tube To Boss Straight Adapter

143993321
742PN12: RNCC: 3 | RNVC: 2
742 PN 12: RNCC: 5 | RNVC: 2
742PN12: RNCC: 5 | RNVC: 2
74742PN12: RNCC: 5 | RNVC: 2

6 Mar 1985

4730-14-382-9919
Bulkhead Hose Connector

143829919
UA10CL16N: RNCC: 3 | RNVC: 2
U10CL16: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-313-1116
Lubrication Fitting

143131116
9200411: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-496-6810
Tube To Boss Straight Adapter

144966810
10355698: RNCC: 3 | RNVC: 2
F300 0T 021 8991: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-377-6163
Tube To Boss Straight Adapter

143776163
R1190: RNCC: 3 | RNVC: 9

10 Jun 1982

4730-14-041-2610
Tube Coupling

140412610
C4: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-452-5591
Pipe Flange

144525591
LN320033F26DN150: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-448-0916
Bulkhead Hose Connector

144480916
DA2C813310005A2: RNCC: 3 | RNVC: 2

12 Jun 1991

4730-14-421-6806
Tube To Hose Straight Adapter

144216806
Q15AS38SNU: RNCC: 3 | RNVC: 2

26 Jan 1988

4730-14-523-9382
Hose Fitting Swaging Socket

145239382
1168207: RNCC: 3 | RNVC: 2
CG250WIGAM: RNCC: 5 | RNVC: 2

14 Feb 2001

4730-14-553-5995
Hose Fitting Swaging Socket

145535995
MI15: RNCC: 3 | RNVC: 2
222 010 020: RNCC: 3 | RNVC: 2

20 Apr 2007

4730-14-427-4315
Tube To Gas Fitting Straight Adapter

144274315
361095: RNCC: 3 | RNVC: 2
AS10080000B59UO: RNCC: 5 | RNVC: 2

19 Oct 1988

4730-14-508-5962
Dispositif Rempliss

145085962
MAT383-0008F2: RNCC: 3 | RNVC: 2

21 Sep 1998

4730-14-301-1265
Ens De Raccordement

143011265
8702-330A75-6050-00: RNCC: 3 | RNVC: 2

21 Feb 1996

4730-14-471-2720
Joint Etanc Purgeur

144712720
111850-01220: RNCC: 3 | RNVC: 2

10 Aug 1994

4730-14-530-9877

4730-14-530-5365
Quick Disconnect Coupling Half

145305365
NBB.111: RNCC: 3 | RNVC: 2

18 Jun 2002

4730-14-463-6786
Flexible Tube Coupling Assembly

144636786
PE20.0.3: RNCC: 3 | RNVC: 2
PE20-03: RNCC: 5 | RNVC: 2

23 Jun 1993

4730-14-234-9387
Tubulure De Raccord

142349387
6702E2F2-3-50CA: RNCC: 3 | RNVC: 9

1 Jan 1967

4730-14-247-5439
Tube To Boss Straight Adapter

142475439
12-8 1-4BGS: RNCC: 3 | RNVC: 2
UMA8X1-4BGSN: RNCC: 3 | RNVC: 2
4A8 1-4BGS: RNCC: 3 | RNVC: 2
M8-4B: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-457-9387
Equipe Raccord En T

144579387
501-776-611-0: RNCC: 3 | RNVC: 2

2 Oct 1992

4730-14-517-8557
Swivel Flange To Hose Straight Adapter

145178557
07711CU161: RNCC: 3 | RNVC: 2
S00137800: RNCC: 5 | RNVC: 2

14 Jan 2000

4730-14-518-5096
Return Tube Bend

145185096
HCOXX000079: RNCC: 3 | RNVC: 9

9 Feb 2000

4730-14-436-6945
Fluid Pressure Line Multiple Connector

144366945
DA2C781230001A1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-575-7992
Tube Coupling

145757992
KQ2H06-M5: RNCC: 3 | RNVC: 2

2 May 2013

4730-14-570-8818
Tube Fitting Brazing Ferrule

145708818
1632: RNCC: 3 | RNVC: 2

1 Feb 2012

4730-14-326-8604
Tube Coupling Assembly

143268604
3601PS63A: RNCC: 3 | RNVC: 2
3601PS63A: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-241-4462
Ecrouraccord

142414462
719S: RNCC: 3 | RNVC: 9
719: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-448-0664
Tube To Boss Straight Adapter

144480664
PM1A707121103: RNCC: 3 | RNVC: 2
PM1A707121103: RNCC: 5 | RNVC: 2

12 Jun 1991

4730-14-246-6452
Lubrication Fitting

142466452
G23BIS08X125LAIT0N: RNCC: 3 | RNVC: 9

1 Jan 1968

4730-14-547-0788
Tube To Boss Straight Adapter

145470788
P519PH0606: RNCC: 3 | RNVC: 2

21 Sep 2005

4730-14-350-7281
Fluid Pressure Line Multiple Connector

143507281
1020220035: RNCC: 3 | RNVC: 2
1020220035: RNCC: 5 | RNVC: 2

12 Jul 1978

4730-14-396-0650
Pipe Flange

143960650
VDPV3501: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-352-1250
Bulkhead Hose Connector

143521250
A11A211107080: RNCC: 3 | RNVC: 2

16 Oct 1978

4730-14-576-0045
Tube Elbow

145760045
XBEWV DKO 16 S ZN FER NOIR: RNCC: 3 | RNVC: 2
109806H: RNCC: 5 | RNVC: 2
9065.701: RNCC: 5 | RNVC: 2
Y00014177: RNCC: 5 | RNVC: 2

22 May 2013

4730-14-519-3157
Tube Coupling Nut Assembly

145193157
215338-0: RNCC: 3 | RNVC: 2

15 Mar 2000

4730-14-520-0912
Raccord Orientable

4730-14-520-7916
Tuyau Bouchon

4730-14-259-1167

4730-14-509-3992

4730-14-278-0924

4730-14-416-5874
Pipe Flange

144165874
4730GG-DN323,9: RNCC: 2 | RNVC: 2
MEC10427: RNCC: 3 | RNVC: 2
4730GG-DN323,9: RNCC: 5 | RNVC: 2

19 Jun 1987

4730-14-432-9119
Tube To Boss Straight Adapter

144329119
10GAZCY618G1-8: RNCC: 3 | RNVC: 2

3 Jul 1989

4730-14-427-9227
Tube Union

144279227
MAT164-0074F9: RNCC: 3 | RNVC: 2

23 Nov 1988

4730-14-214-6740
Raccord Special Equ

142146740
NO PRIMARY REF14-214-6740: RNCC: 3 | RNVC: 2
411218: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-438-3397
Bossage A Souder

144383397
4730-53-25: RNCC: 2 | RNVC: 2

14 Mar 1990

4730-14-446-1801
Tube Tee

144461801
R7708Z2: RNCC: 3 | RNVC: 2

6 Mar 1991

4730-14-391-8506
Flange To Boss Straight Adapter

143918506
303-234-801-0: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-452-6835
Tube Coupling

144526835
NO PRIMARY REF14-452-6835: RNCC: 3 | RNVC: 2
980504: RNCC: 5 | RNVC: 9

15 Jan 1992

4730-14-377-1743
Tube Tee

143771743
9TR12-8-12NU: RNCC: 3 | RNVC: 2
5000165688: RNCC: 5 | RNVC: 2
5000165688: RNCC: 5 | RNVC: 9

17 May 1982

4730-14-261-7851
Tube To Boss Straight Adapter

142617851
UML16 1-2BSPC: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-410-8863
Quick Disconnect Coupling Half

144108863
RBE11-7153/IC/JE: RNCC: 3 | RNVC: 2
RBE11-7153ICJE: RNCC: 5 | RNVC: 2

23 Jul 1986

4730-14-278-3117
Tube To Boss Straight Adapter

142783117
F3BPL4/6-1/4: RNCC: 3 | RNVC: 2
F3BPL4/6-1/4: RNCC: 3 | RNVC: 2
9PL4-6X1-4GAZC0: RNCC: 5 | RNVC: 2
F3BPLB6X1 1-4: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-432-9116
Tube To Boss Straight Adapter

144329116
9NPTC06-8X1-2: RNCC: 3 | RNVC: 2
9NPTC06-8X1-2-78519: RNCC: 5 | RNVC: 2
FIG96-8X1-2-78519: RNCC: 5 | RNVC: 2

3 Jul 1989

4730-14-320-2091
Raccord Special

143202091
NO PRIMARY REF14-320-2091: RNCC: 3 | RNVC: 2
308116: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-369-6669
Barillet Trois Voie

143696669
B0307-0001F4: RNCC: 3 | RNVC: 2
B0309-001F4: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-342-2183
Bride Raccordement

143422183
GSM162-006F18: RNCC: 3 | RNVC: 2
411MA470REP9: RNCC: 5 | RNVC: 2
GSM162-06F18: RNCC: 5 | RNVC: 2

14 Apr 1977

4730-14-507-6243
Bride Speciale

145076243
D1407111: RNCC: 3 | RNVC: 2
A0461-D1407111: RNCC: 5 | RNVC: 2

30 Jul 1998

4730-14-489-3209
Quick Disconnect Wye

144893209
10376308: RNCC: 3 | RNVC: 2
F300 0T 023 2100: RNCC: 6 | RNVC: 9

9 Jul 1997

4730-14-297-8976
Bloc De Derivation

142978976
411MA0162FB7: RNCC: 3 | RNVC: 2
411MA162FB7: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-303-5105
Obturateur Tuyauter

143035105
SKR506A: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-446-4779
Sediment Strainer Element

144464779
8812938208: RNCC: 3 | RNVC: 2

20 Mar 1991

4730-14-305-4549
Fluid Pressure Line Multiple Connector

143054549
103090200101: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-526-2466
Hydraulic System Accessories Manifold

145262466
10616281: RNCC: 3 | RNVC: 2

11 Jul 2001

4730-14-396-9420
Tube Tee

143969420
0288877590: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-525-7172
Return Tube Bend

145257172
20 242 820 3030: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-386-5232
Fluid Pressure Line Multiple Connector

143865232
052655: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-375-6995
Self-Sealing Coupling Assembly

143756995
MX80DN20TYPEB: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-470-2810
Sediment Strainer Element

144702810
BSNGCFF008F9B: RNCC: 3 | RNVC: 2

14 Jun 1994

4730-14-504-6212
Hose Fitting Swaging Socket

145046212
EMBOU00023: RNCC: 3 | RNVC: 2

25 Feb 1998

4730-14-505-5013
Pipe Flange

145055013
7023433: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-501-1012
Hose To Gas Fitting Straight Adapter

145011012
01201217: RNCC: 3 | RNVC: 2
91343023: RNCC: 5 | RNVC: 2
F300 0T 025 1399: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-429-5810
Bulkhead Hose Connector

144295810
7A12LCL10NU: RNCC: 3 | RNVC: 2
1807131937: RNCC: 5 | RNVC: 2
5005030126: RNCC: 5 | RNVC: 2

1 Feb 1989

4730-14-416-2278
Hydraulic System Accessories Manifold

144162278
16040766: RNCC: 3 | RNVC: 2

3 Jun 1987

4730-14-265-7367
Bride

142657367
26248504: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-243-0173

4730-14-309-7178
Clapet Racc Auto-Ob

143097178
A77378-1: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-395-4092
Tubulure

143954092
4-14582: RNCC: 3 | RNVC: 2

11 Oct 1984

4730-14-395-3801
Diaphragme Vis

143953801
N0189F43BREP41: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-529-4870
Fluid Flow Restrictor Unit

145294870
D65789: RNCC: 3 | RNVC: 2

29 Mar 2002

4730-14-526-2468
Hydraulic System Accessories Manifold

145262468
10594750: RNCC: 3 | RNVC: 2

11 Jul 2001

4730-14-403-5038
Tube To Boss Straight Adapter

144035038
GE12LMA2L: RNCC: 3 | RNVC: 2
GE12LMEDA2L: RNCC: 3 | RNVC: 2
GE12LMA2L: RNCC: 5 | RNVC: 2
GE12LMEDA2L: RNCC: 5 | RNVC: 2
GE12LMA2L: RNCC: 5 | RNVC: 9
GE12LMEDA2L: RNCC: 5 | RNVC: 9

21 Aug 1985

4730-14-325-6795
Bulkhead Hose Connector

143256795
0000364860: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-394-1062
Tube To Boss Straight Adapter

143941062
GSM164-082F1: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-525-5348
Threaded Tube Fitting Plug

145255348
53-00-95: RNCC: 3 | RNVC: 2
050076-00000REP9: RNCC: 5 | RNVC: 2

12 Jun 2001

4730-14-222-6556
Tube Fitting Brazing Ferrule

142226556
GSM1297F1AF1BTABLEAU2D1-30I19: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-270-4136
Bride Prise Deau

142704136
P30221A: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-275-6848

4730-14-346-9562
Raccor Tourna Corps

143469562
A77139-2: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-217-2877
Buse A Collerette

142172877
S2248: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-231-0717
Fourrure De Sertiss

142310717
FC0608PI: RNCC: 3 | RNVC: 2
FC6-8PI: RNCC: 5 | RNVC: 2
FC06X8PI: RNCC: 5 | RNVC: 2
FC6X8PI: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-248-1158
Boulon A Passage De

142481158
1B25Z8A: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-333-5183
Barillet A 6 Voies

143335183
GSM163-007BF40: RNCC: 3 | RNVC: 2
GSM163-07BF40: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-281-0485
Barillet Ecrous Ens

142810485
511-411-015REPBETE: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-230-7151
Pipe Flange

142307151
GSM1487DET4: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-335-2742
Fluid Pressure Line Multiple Connector

143352742
B273517: RNCC: 3 | RNVC: 2
0023532853: RNCC: 5 | RNVC: 2
273517: RNCC: 5 | RNVC: 9
0023532853: RNCC: 5 | RNVC: 9
DBAB273517: RNCC: 5 | RNVC: 9

30 Jun 1976

4730-14-527-3857
Tube Tee

145273857
H145355: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-496-3819
Quick-Disconnect Nipple

144963819
192037: RNCC: 3 | RNVC: 2
F300 0T 021 4697: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-375-7136
Tube To Boss Straight Adapter

143757136
8159202166: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-496-4165
Tube To Boss Straight Adapter

144964165
202294: RNCC: 3 | RNVC: 2
F300 0T 021 5066: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-378-6621
Threaded Tube Fitting Plug

143786621
82008300: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-400-2730

4730-14-233-6041

4730-14-524-4410
Quick Disconnect Coupling Half

145244410
RBE06-7810/IC/JE: RNCC: 3 | RNVC: 2

20 Mar 2001

4730-14-379-9461
Embout Cassant

143799461
MAT900-02-00: RNCC: 3 | RNVC: 2

20 Oct 1982

4730-14-557-6197
Tube Nipple

145576197
SV12LCF: RNCC: 3 | RNVC: 2
427341: RNCC: 5 | RNVC: 2

30 Jun 2008

4730-14-272-9304
Tube Tee

142729304
R6520: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-306-7871

4730-14-225-2111
Demiraccord Debranc

142252111
D2604-2-161: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-495-6011
Tube Union

144956011
C48375-69: RNCC: 3 | RNVC: 2
F300 0T 019 5281: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-349-6692
Quick Disconnect Coupling Half

143496692
065-30-9094-1: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-306-7692
Bride A Zinc

143067692
000MA0781F5REP2DN80: RNCC: 3 | RNVC: 2
000MA781F5REP2DN80: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-283-7662
Swivel Retaining Pipe Flange

142837662
2-05107: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-243-2636

4730-14-500-2233
Graisseur

145002233
338440X1: RNCC: 3 | RNVC: 2
F300 0T 024 2251: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-268-8939

4730-14-367-0400

4730-14-567-1889
Tube Coupling

145671889
ABS1462E08: RNCC: 1 | RNVC: 2
PE29218E08: RNCC: 3 | RNVC: 2
ABS1462E08: RNCC: 5 | RNVC: 2

21 Feb 2011

4730-14-378-6558

4730-14-328-9963

4730-14-278-0921

4730-14-212-8493
Quick Disconnect Coupling Half

142128493
206691-1: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-347-1702
Bulkhead Hose Connector

143471702
E4M311-52-820: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-242-7974
Tube Tee

142427974
NG40901-4APL18N0M1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-562-3467
Hose Clamp

145623467
SGL09-19-5W2: RNCC: 3 | RNVC: 2

15 Oct 2009

4730-14-320-1484
Tube To Boss Straight Adapter

143201484
104-30-17: RNCC: 3 | RNVC: 2
104-30-17: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-576-2120
Hose Clamp

145762120
ASNA0033-014: RNCC: 1 | RNVC: 2
ASNA0033-014: RNCC: 3 | RNVC: 2
ASNA0033-014: RNCC: 5 | RNVC: 2

6 Jun 2013

4730-14-359-8771
Bride Later Av Tbd

143598771
2-16454: RNCC: 3 | RNVC: 2

15 Oct 1979

4730-14-562-0516
Quick Disconnect Coupling Half

145620516
CR490166: RNCC: 3 | RNVC: 2

25 Sep 2009

4730-14-395-4105
Tubulure

143954105
7601-3295: RNCC: 3 | RNVC: 2

11 Oct 1984

4730-14-220-6558
Tube Tee

142206558
Q1-57-8SD: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-287-0557
Pipe Flange

142870557
RUAN7625M913P13D: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-512-7396
Fluid Passage Bolt

145127396
800034721: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-388-3145
Sediment Strainer Element

143883145
34188A: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-235-9646
Fluid Passage Bolt

142359646
45286ADX: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-288-3389
Fluid Passage Bolt

142883389
50640: RNCC: 3 | RNVC: 2
50640: RNCC: 5 | RNVC: 2
7170: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-509-1780
Tube To Boss Straight Adapter

145091780
KQH04-M5: RNCC: 3 | RNVC: 2

21 Oct 1998

4730-14-403-5043
Fluid Pressure Line Multiple Connector

144035043
WH06LMA2L: RNCC: 3 | RNVC: 2
WH06LMA2L: RNCC: 5 | RNVC: 2
427379: RNCC: 5 | RNVC: 2
WH06LMA2L: RNCC: 5 | RNVC: 9

21 Aug 1985

4730-14-325-8985
Pipe Flange

143258985
AS34TV103REP6: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-494-0879
Tube Tee

144940879
202369900550: RNCC: 3 | RNVC: 2
F300 0T 015 4239: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-536-0723
Fluid Pressure Line Multiple Connector

145360723
36402617: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-544-7528
Tube To Hose Straight Adapter

145447528
P763099: RNCC: 3 | RNVC: 2

22 Feb 2005

4730-14-306-1236
Tube Fitting Clinch Sleeve

143061236
91241200: RNCC: 3 | RNVC: 2
AB12HP: RNCC: 5 | RNVC: 9
BAH12: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-306-2883
Quick Disconnect Coupling Half

143062883
30578: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-214-4050
Tube Tee

142144050
R7808: RNCC: 3 | RNVC: 2
RA7808: RNCC: 3 | RNVC: 9

1 Jan 1965

4730-14-218-7524
Tube Coupling

142187524
0000364409: RNCC: 3 | RNVC: 2
0000364409: RNCC: 5 | RNVC: 9
364409: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-494-1693
Fluid Pressure Line Multiple Connector

144941693
53725: RNCC: 3 | RNVC: 2
F300 0T 015 7825: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-502-2439
Tube To Boss Straight Adapter

145022439
NNP4730920028836: RNCC: 3 | RNVC: 2

1 Dec 1997

4730-14-363-6696
Pipe Flange

143636696
H1078SP1PL5A: RNCC: 3 | RNVC: 2

6 Jul 1980

4730-14-539-0625
Quick Disconnect Reducer

145390625
NGM0060301015103: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-293-6374
Tube To Boss Straight Adapter

142936374
6714: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-418-0512
Fluid Pressure Line Multiple Connector

144180512
093710J: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-398-2381
Fluid Passage Bolt

143982381
RU16411: RNCC: 3 | RNVC: 2
RU16411: RNCC: 5 | RNVC: 2

31 Jan 1985

4730-14-533-2329
Tube To Boss Straight Adapter

145332329
H102858V: RNCC: 3 | RNVC: 2

29 Jan 2003

4730-14-404-4759
Tube To Boss Straight Adapter

144044759
6331-6M10X1: RNCC: 3 | RNVC: 2

30 Oct 1985

4730-14-552-1117
Branched Tubing Connector

145521117
0000361750: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-392-9181
Anchor And Reinforcement Pipe Clamp

143929181
0281607170: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-423-7359
Tube To Boss Straight Adapter

144237359
9936500800: RNCC: 3 | RNVC: 2

28 Apr 1988

4730-14-526-1860
Tube Union

145261860
VR162388+VR168785: RNCC: 3 | RNVC: 2

9 Jul 2001

4730-14-403-0332
Tube To Boss Straight Adapter

144030332
F4BXS12-1-2: RNCC: 3 | RNVC: 2
91636252: RNCC: 5 | RNVC: 2

25 Jul 1985

4730-14-237-5323
Raccord Traversee D

142375323
401960: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-283-9910
Raccord Dechangeur

142839910
51490: RNCC: 3 | RNVC: 9

1 Jan 1972

4730-14-562-6193
Tube To Boss Tee

145626193
ET18LMEDOMDCF: RNCC: 3 | RNVC: 2
ET18LMEDOMDCF: RNCC: 5 | RNVC: 9

9 Nov 2009

4730-14-326-9420

4730-14-323-4997

4730-14-540-3349
Tube Union

145403349
NNP4730841400070: RNCC: 3 | RNVC: 2

18 Mar 2004

4730-14-358-3293

4730-14-443-9892
Raccordement Bloc

144439892
1704420: RNCC: 3 | RNVC: 2

18 Dec 1990

4730-14-263-1961
Vis De Purge

142631961
1413453020: RNCC: 3 | RNVC: 2
0854805300: RNCC: 5 | RNVC: 2
0854805300: RNCC: 5 | RNVC: 9
0854505300: RNCC: 5 | RNVC: 9
12-123-3749: RNCC: 6 | RNVC: 9

1 Jan 1970

4730-14-307-1115
Sediment Strainer Element

143071115
NO PRIMARY REF14-307-1115: RNCC: 3 | RNVC: 2
FB2079: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-416-1409
Tube Coupling

144161409
NO PRIMARY REF14-416-1409: RNCC: 3 | RNVC: 2
Z52376: RNCC: 5 | RNVC: 9

3 Jun 1987

4730-14-469-9757
Tube-Hose Fitting Compression Sleeve

144699757
NOR-DI13-5N: RNCC: 3 | RNVC: 2
NOR-DI13-5N: RNCC: 3 | RNVC: 9

20 May 1994

4730-14-480-3238
Self-Sealing Coupling Half

144803238
5400S2-16: RNCC: 3 | RNVC: 2
91719950: RNCC: 5 | RNVC: 2

7 Mar 1996

4730-14-423-4754
Pipe Flange

144234754
UA50088006PN100-11LSPDN65: RNCC: 2 | RNVC: 2
4730HCPN100DN06511LSP: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-566-1800
Union Thread Piece

145661800
NO PRIMARY REF 14-566-1800: RNCC: 3 | RNVC: 2
MS17: RNCC: 5 | RNVC: 9
FS0000053: RNCC: 6 | RNVC: 9

26 Oct 2010

4730-14-295-3370
Tube To Boss Straight Adapter

142953370
341A75-5002-20: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-476-5748
Tube Union

144765748
5753-3248: RNCC: 3 | RNVC: 2
89302700: RNCC: 5 | RNVC: 2

21 Jun 1995

4730-14-427-8503
Element Raccord

144278503
AS34TQ103FREP13: RNCC: 3 | RNVC: 2

17 Nov 1988

4730-14-223-5512
Crepine Daspiration

142235512
0000126500: RNCC: 3 | RNVC: 2
0000126500: RNCC: 5 | RNVC: 9
126500: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-448-5767
Tube Coupling

144485767
WBRAB14: RNCC: 3 | RNVC: 2
WBRAB14: RNCC: 3 | RNVC: 9

2 Jul 1991

4730-14-344-1024
Pipe Flange

143441024
7068F88-9UE8: RNCC: 2 | RNVC: 2

13 Jul 1977

4730-14-297-8951
Bloc De Derivation

142978951
411MA0162FA1: RNCC: 3 | RNVC: 2
411MA162FA1: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-322-9515
Tube To Boss Straight Adapter

143229515
102128H: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-456-6456
Tube Tee

144566456
LN326064F7REP1: RNCC: 3 | RNVC: 2
RAR1536: RNCC: 5 | RNVC: 2

16 Jul 1992

4730-14-430-6836
Quick Disconnect Coupling Half

144306836
480446: RNCC: 3 | RNVC: 2
480446: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-417-7881
Fluid Pressure Line Multiple Connector

144177881
BJIISO12: RNCC: 3 | RNVC: 9

22 Jul 1987

4730-14-297-9924
Bride Speciale

142979924
AS34TV117AREP10: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-339-9888
Tube To Boss Straight Adapter

143399888
361301: RNCC: 3 | RNVC: 2

18 Jan 1977

4730-14-533-6820
Flange To Hose Straight Adapter

145336820
TBEHC: RNCC: 3 | RNVC: 2

18 Feb 2003

4730-14-263-7461
Tube Tee

142637461
T120: RNCC: 3 | RNVC: 2
T120: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-408-8657
Tube To Boss Straight Adapter

144088657
8401141747: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-355-9430
Tube To Boss Straight Adapter

143559430
1611880008: RNCC: 3 | RNVC: 2
16118800: RNCC: 5 | RNVC: 2
4322220: RNCC: 5 | RNVC: 9

5 Apr 1979

4730-14-368-8165
Tube To Boss Straight Adapter

143688165
9114066066: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-417-0759
Tube Fitting Flared Sleeve

144170759
109091: RNCC: 3 | RNVC: 2

1 Jul 1987

4730-14-349-7991
Tube To Boss Straight Adapter

143497991
0000140275: RNCC: 3 | RNVC: 2
0000140275: RNCC: 5 | RNVC: 9
140275: RNCC: 5 | RNVC: 9

14 Jun 1978

4730-14-481-7604
Flange To Hose Elbow

144817604
34 58 57: RNCC: 3 | RNVC: 2

30 May 1996

4730-14-544-6134
Quick Disconnect Coupling Half

145446134
LZ 07021 V0: RNCC: 3 | RNVC: 2
LZ07021VO: RNCC: 5 | RNVC: 2

14 Feb 2005

4730-14-276-1855
Tube Fitting Clinch Sleeve

142761855
205-32: RNCC: 3 | RNVC: 2
BE32: RNCC: 3 | RNVC: 2
1A32: RNCC: 3 | RNVC: 2
DA32N: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-296-7923

4730-14-296-5307

4730-14-312-8161
Manchette Reductric

143128161
M25-26: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-393-9178
Raccord Auto- Capot

143939178
434-29: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-562-9108
Hose Clamp

145629108
S4629H08-045: RNCC: 3 | RNVC: 2

3 Dec 2009

4730-14-310-4262
Tube Repair Plug

143104262
K1712DREP10TAMC16: RNCC: 3 | RNVC: 2
K79-12REP10TAMP0N: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-269-0980
Tube Tee

142690980
5TR20-14-20NN: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-370-4651
Quick Disconnect Coupling Half

143704651
23MEPK324500005PL1TYPEB-REP1: RNCC: 3 | RNVC: 2
CMT30E9047PL1TYPEB-REP1-UE12: RNCC: 5 | RNVC: 2
CMT30L9047-1BBR0NZEUE12: RNCC: 5 | RNVC: 2

18 May 1981

4730-14-327-3119
Self-Sealing Coupling Half

143273119
3160S73-37-915: RNCC: 3 | RNVC: 2
85-672-0230: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-375-9591
Fluid Pressure Line Multiple Connector

143759591
NO PRIMARY REF14-375-9591: RNCC: 3 | RNVC: 2
404111368: RNCC: 5 | RNVC: 2
404111368: RNCC: 5 | RNVC: 9

30 Mar 1982

4730-14-453-9500
Tube To Hose Straight Adapter

144539500
LN324-100-11-074DN15: RNCC: 3 | RNVC: 2
RAB9322: RNCC: 5 | RNVC: 2

17 Mar 1992

4730-14-408-7217
Quick Disconnect Coupling Half

144087217
H3-63: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-276-2035
Tube Fitting Brazing Ferrule

142762035
6784-1DB28-20: RNCC: 2 | RNVC: 2
MEC11383: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-377-1745
Tube To Boss Straight Adapter

143771745
92-16-22X150C0NU: RNCC: 3 | RNVC: 2
5000165690: RNCC: 5 | RNVC: 2
5005030075: RNCC: 5 | RNVC: 2
5000165690: RNCC: 5 | RNVC: 9

17 May 1982

4730-14-471-9164
Bulkhead Hose Connector

144719164
1/2PPA8-85MM: RNCC: 3 | RNVC: 2

27 Sep 1994

4730-14-543-8826
Quick-Disconnect Nipple

145438826
P-R063: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-475-0272
Brise-Vague

144750272
27101784-9: RNCC: 3 | RNVC: 2
476562C: RNCC: 5 | RNVC: 2
AMU476562C: RNCC: 5 | RNVC: 2

16 Mar 1995

4730-14-345-6594
Bride A Zinc

143456594
000MA0858F6: RNCC: 3 | RNVC: 2
000MA858F6: RNCC: 5 | RNVC: 2

5 Oct 1977

4730-14-414-2278
Pipe Flange

144142278
U1240-11LSFPN150DN100Z2CND1712T3: RNCC: 3 | RNVC: 2

27 Jan 1987

4730-14-330-3508
Tube To Boss Straight Adapter

143303508
PAA50-01-008: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-383-8719
Swivel Retaining Pipe Flange

143838719
U1198-48CUPR0ALU: RNCC: 3 | RNVC: 2
U1198-48CUPR0ALU: RNCC: 5 | RNVC: 2

11 Apr 1983

4730-14-324-1348
Barillet Cinq Voies

143241348
GSM163-006F17AVECECR0USRACC0RD: RNCC: 3 | RNVC: 2
GSM163-06F17AVECECR0USRACC0RD: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-331-1607
Jeu Demi-Manchons

143311607
L25.06: RNCC: 3 | RNVC: 2
L25-06: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-216-4141
Raccord Special

142164141
NO PRIMARY REF14-216-4141: RNCC: 3 | RNVC: 2
26316: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-565-8368
Tube To Hose Straight Adapter

145658368
4364: RNCC: 3 | RNVC: 2

28 Sep 2010

4730-14-269-2054

4730-14-561-9733
Fluid Flow Restrictor

145619733
CR490502: RNCC: 3 | RNVC: 2

21 Sep 2009

4730-14-417-3607
Tube To Boss Straight Adapter

144173607
4730AB4.3DN14NU: RNCC: 2 | RNVC: 2
LN329-017REP10: RNCC: 3 | RNVC: 2
LW114-NS1406S: RNCC: 3 | RNVC: 2
RAB9284: RNCC: 5 | RNVC: 2
84011417NU: RNCC: 5 | RNVC: 2
LN329-017F16DN13,5G3/8"A: RNCC: 5 | RNVC: 2

6 Jul 1987

4730-14-242-7981
Tube Tee

142427981
NG40901-4APL63N0M1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-350-1384
Adapteur Double

143501384
BN320-564AF10-10: RNCC: 3 | RNVC: 2

14 Jun 1978

4730-14-265-3052
Tube To Boss Straight Adapter

142653052
321A75-0805-20: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-430-1376
Bloc Racordement

144301376
2277-40-652: RNCC: 3 | RNVC: 2

3 Mar 1989

4730-14-276-2981
Dispositif Daliment

142762981
NO PRIMARY REF14-276-2981: RNCC: 3 | RNVC: 2
DISP0SITIFALIMENTATI0N: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-381-0373
Tube To Boss Straight Adapter

143810373
4730AB4.4DN20EQUIPE: RNCC: 2 | RNVC: 2
84052021: RNCC: 3 | RNVC: 2

14 Dec 1982

4730-14-032-0105
Bulkhead Hose Connector

140320105
0000363440: RNCC: 3 | RNVC: 2

5 Jul 1980

4730-14-387-5039
Lubrication Fitting

143875039
N113822AREP688: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-474-1528
Tuyere

144741528
10000D30484-5: RNCC: 3 | RNVC: 2

31 Jan 1995

4730-14-354-8541
Fluid Pressure Line Multiple Connector

143548541
0000147563: RNCC: 3 | RNVC: 2
0000147563: RNCC: 5 | RNVC: 9
147563: RNCC: 5 | RNVC: 9

20 Feb 1979

4730-14-527-0044
Check Valve Adapter

145270044
39064120: RNCC: 3 | RNVC: 2
39064120: RNCC: 5 | RNVC: 9

24 Sep 2001

4730-14-417-7628
Tube Tee

144177628
TSI16M: RNCC: 3 | RNVC: 9

22 Jul 1987

4730-14-544-4455
Tube To Boss Straight Adapter

145444455
101043X04014A: RNCC: 3 | RNVC: 9

31 Jan 2005

Load More Results