What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 122 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 122 of 185

4730-14-382-8218
Tube To Boss Straight Adapter

143828218
GSM164-026F6: RNCC: 3 | RNVC: 2
MAT164-0353F6: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-423-4555
Pipe Flange

144234555
UA50088006PN150-11B2SDN20: RNCC: 2 | RNVC: 2
4730HCPN150DN02011B2S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-234-5723
Bouchon Filete Spec

142345723
321A22-0437-20: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-318-6451
Sediment Strainer Element

143186451
NO PRIMARY REF14-318-6451: RNCC: 3 | RNVC: 2
D25AB1200-017: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-426-6098
Tube To Gas Fitting Straight Adapter

144266098
RI1/4X3/8A3CX: RNCC: 3 | RNVC: 2
RI1/4X3/8A3CX: RNCC: 3 | RNVC: 9
RI1/4X3/8: RNCC: 5 | RNVC: 9

8 Sep 1988

4730-14-482-4611
Tube Tee

144824611
789.D.08.06T.08: RNCC: 3 | RNVC: 2
789D08 06T08: RNCC: 5 | RNVC: 2
789 D 08 06T 08: RNCC: 5 | RNVC: 2
789D08-06T08: RNCC: 5 | RNVC: 2
789D0806T08: RNCC: 5 | RNVC: 2
74789D0806T08: RNCC: 5 | RNVC: 2

11 Jul 1996

4730-14-513-2770
Pipeline Flexible Connection

145132770
T.R205-30/AF 48X500: RNCC: 3 | RNVC: 2

10 Mar 1999

4730-14-575-7789
Flange To Tube Elbow

145757789
M2811350300000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-565-6676
Fluid Passage Bolt

145656676
ZE15189: RNCC: 3 | RNVC: 2

14 Sep 2010

4730-14-239-3720
Bouchon Special

4730-14-457-1289
Tube Union

144571289
METALGRIP 76.1 EPDM 16 BAR INOX: RNCC: 3 | RNVC: 2
1800761: RNCC: 5 | RNVC: 2

11 Aug 1992

4730-14-544-5731
Quick Disconnect Coupling Half

145445731
29523093: RNCC: 3 | RNVC: 2

10 Feb 2005

4730-14-336-8073
Pipe Flange

143368073
NO PRIMARY REF14-336-8073: RNCC: 3 | RNVC: 2
13433450: RNCC: 5 | RNVC: 9

7 Oct 1976

4730-14-467-6840
Obturateur Porte-Di

144676840
MAT852-0058: RNCC: 3 | RNVC: 2

24 Jan 1994

4730-14-398-5792
Tube Tee

143985792
GSM164-025F24: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-429-2876
Tube Tee

144292876
F521-07-09: RNCC: 3 | RNVC: 2

11 Jan 1989

4730-14-466-1173
Hydraulic System Accessories Manifold

144661173
REMDCHEGZLE-SERT-060030: RNCC: 3 | RNVC: 2

27 Oct 1993

4730-14-457-8015
Pipe Flange

144578015
4730JADN350-11B2S: RNCC: 2 | RNVC: 2

24 Sep 1992

4730-14-451-8127
Fluid Flow Restrictor Unit

144518127
200-000-85-10: RNCC: 3 | RNVC: 2
89470858: RNCC: 5 | RNVC: 2

4 Dec 1991

4730-14-268-8867
Tube To Boss Straight Adapter

142688867
631X4111: RNCC: 3 | RNVC: 2
U1-10D631X4111: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-427-0341
Pipe Flange

144270341
MAT162-0022DN125MALE: RNCC: 3 | RNVC: 2
MAT162-0022F15: RNCC: 3 | RNVC: 2

5 Oct 1988

4730-14-339-0802
Sediment Strainer Element

143390802
NO PRIMARY REF14-339-0802: RNCC: 3 | RNVC: 2
280836: RNCC: 5 | RNVC: 9

17 Dec 1976

4730-14-409-7342
Quick Disconnect Coupling Half

144097342
RBE08-6808: RNCC: 3 | RNVC: 2
RBE8-6808: RNCC: 5 | RNVC: 2

28 May 1986

4730-14-366-8940
Quick Disconnect Coupling Half

143668940
RBE19-1105: RNCC: 3 | RNVC: 2

11 Dec 1980

4730-14-455-3766
Tube To Boss Straight Adapter

144553766
01010813: RNCC: 3 | RNVC: 2
439-672: RNCC: 5 | RNVC: 2
439-672: RNCC: 5 | RNVC: 2
91510927: RNCC: 5 | RNVC: 2
0101-08-13: RNCC: 5 | RNVC: 2

21 May 1992

4730-14-406-9807
Te Pour Tub Ebauche

144069807
MAT164-0004F4: RNCC: 3 | RNVC: 2

22 Jan 1986

4730-14-273-5436
Tube Union

142735436
0799-0232: RNCC: 3 | RNVC: 2
NFEN560: RNCC: 5 | RNVC: 2
0799-1232: RNCC: 5 | RNVC: 2
SAF0799-0232: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-542-0542
Tube To Boss Straight Adapter

145420542
25212129-120: RNCC: 3 | RNVC: 2
502105007005A: RNCC: 3 | RNVC: 9

2 Jul 2004

4730-14-418-6528
Pipe Flange

144186528
E29203-01B-PN16DN65BF42N: RNCC: 2 | RNVC: 2
MEC10715: RNCC: 3 | RNVC: 2
RAR1393: RNCC: 5 | RNVC: 2
4730CJ-DN65: RNCC: 5 | RNVC: 2

9 Sep 1987

4730-14-405-8351
Tube Coupling

144058351
NMN6784-1DA38: RNCC: 3 | RNVC: 2

4 Dec 1985

4730-14-202-3758
Fluid Pressure Line Multiple Connector

142023758
309-10NN: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-346-7066
Plaque De Reduction

143467066
6784-1DH63-20A: RNCC: 2 | RNVC: 2
MEC11238: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-302-9932
Tube To Boss Straight Adapter

143029932
7062BB1B1966VCTT2-10UA9C337: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-279-0627
Swivel Retaining Pipe Flange

142790627
6784-1DC63: RNCC: 2 | RNVC: 2
MEC11404: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-237-6824

4730-14-262-1376

4730-14-261-4039

4730-14-324-1740
Couronne Traversee

143241740
SEAS20584REP1M0NTAGEB: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-271-3387
Raccord

142713387
5380561: RNCC: 3 | RNVC: 2
5380561: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-444-5603
Tube Union

144445603
3DS14CLNU: RNCC: 3 | RNVC: 2
567651: RNCC: 5 | RNVC: 2
567651: RNCC: 5 | RNVC: 9

15 Jan 1991

4730-14-576-2669
Pipe Coupling

145762669
2290: RNCC: 3 | RNVC: 2

10 Jun 2013

4730-14-239-9978
Fourrure Elastique

142399978
F10CADMIE: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-310-4375

4730-14-220-6080

4730-14-220-6067

4730-14-558-6058
Tube To Boss Straight Adapter

145586058
973 011 220 4: RNCC: 3 | RNVC: 2
5010607503: RNCC: 5 | RNVC: 2

16 Oct 2008

4730-14-042-5687
Self-Sealing Coupling Half

140425687
280-85-03: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-494-7025
Tube To Boss Straight Adapter

144947025
NO PRIMARY REF14-494-7025: RNCC: 3 | RNVC: 2
017945: RNCC: 5 | RNVC: 9
F300 0T 017 8029: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-491-3398
Tube To Boss Straight Adapter

144913398
NO PRIMARY REF14-491-3398: RNCC: 3 | RNVC: 2
Y106609: RNCC: 5 | RNVC: 9
F300 0T 002 3333: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-390-5214
Bulkhead Hose Connector

143905214
64353280001BREPAAH-F15A23-23DN1-: RNCC: 3 | RNVC: 1

26 Jan 1984

4730-14-311-4578
Bulkhead Hose Connector

143114578
702A30-1512-20: RNCC: 3 | RNVC: 2

21 Mar 1996

4730-14-541-4955
Tube Coupling

145414955
RBE11-71530DIAJE: RNCC: 3 | RNVC: 2

10 Jun 2004

4730-14-462-8078
Flange To Grooved Clamp Straight Adapter

144628078
DIV396-01-00: RNCC: 3 | RNVC: 2

3 May 1993

4730-14-380-9711
Tube Tee

143809711
130CU18-12-18: RNCC: 3 | RNVC: 2

14 Dec 1982

4730-14-570-9119
Pipe Tee

145709119
ASNA3757C080608: RNCC: 1 | RNVC: 2
PE20218-080608: RNCC: 3 | RNVC: 2
ASNA3757C080608: RNCC: 5 | RNVC: 2

2 Feb 2012

4730-14-369-1577
Bulkhead Hose Connector

143691577
365A62-1175-20: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-468-3894
Self-Sealing Coupling Half

144683894
NO PRIMARY REF14-468-3894: RNCC: 3 | RNVC: 2
91726461: RNCC: 5 | RNVC: 2
20.10.60: RNCC: 5 | RNVC: 2
20-10-60: RNCC: 5 | RNVC: 9

23 Feb 1994

4730-14-337-7829
Self-Sealing Coupling Assembly

143377829
A1-24267: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-440-6232
Tube Tee

144406232
TSI8: RNCC: 3 | RNVC: 2
TSI8M: RNCC: 5 | RNVC: 2
99151529: RNCC: 5 | RNVC: 2
CAE01331: RNCC: 5 | RNVC: 2
20120-M8INOX: RNCC: 5 | RNVC: 9

18 Jul 1990

4730-14-355-5326
Tube Coupling

143555326
3751SB20A: RNCC: 3 | RNVC: 2
3751SB20A: RNCC: 5 | RNVC: 9

19 Mar 1979

4730-14-568-9700
Tube To Hose Straight Adapter

145689700
RLS2218: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-032-1599
Pipe Flange

140321599
CMT30E9037F25REP2: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-212-1537

4730-14-549-2091
Pipe To Tube Straight Adapter

145492091
718035: RNCC: 3 | RNVC: 2

9 Mar 2006

4730-14-437-4374
Condenser Tube Erosion Protector

144374374
20110987: RNCC: 3 | RNVC: 2

31 Jan 1990

4730-14-286-9546
Fluid Passage Bolt

142869546
12430650B: RNCC: 3 | RNVC: 2
43065: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-369-7973
Fluid Passage Bolt

143697973
52S1002313: RNCC: 3 | RNVC: 2
52S1002313: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-451-8918
Sediment Strainer Element

144518918
10000250: RNCC: 3 | RNVC: 2

11 Dec 1991

4730-14-449-1514
Tube Tee

144491514
S6XS20: RNCC: 3 | RNVC: 2
S6XS20: RNCC: 5 | RNVC: 2
91713581: RNCC: 5 | RNVC: 2

31 Jul 1991

4730-14-438-5127
Bulkhead Hose Connector

144385127
DA2C521001007U1: RNCC: 3 | RNVC: 2

21 Mar 1990

4730-14-372-2723
Bulkhead Hose Connector

143722723
UA16CL16NNU: RNCC: 3 | RNVC: 2
106-16CL16NU: RNCC: 3 | RNVC: 2
3A16CL16NU: RNCC: 3 | RNVC: 2
202369900340: RNCC: 5 | RNVC: 2

1 Sep 1981

4730-14-536-0466
Tube To Hose Straight Adapter

145360466
PE65401TE14: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-528-1800
Swivel Flange To Hose Straight Adapter

145281800
N13660253: RNCC: 3 | RNVC: 2

9 Jan 2002

4730-14-526-6355
Bulkhead Hose Connector

145266355
9201500: RNCC: 3 | RNVC: 2
1099901N00: RNCC: 5 | RNVC: 2

8 Aug 2001

4730-14-202-5270
Tube Tee

142025270
R6X20X20: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-395-3065
Tube Tee

143953065
TF188: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-032-3088
Tube Tee

140323088
4730AJ4.1DN14EQUIPE: RNCC: 2 | RNVC: 2
8404140066: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-378-6589
Threaded Tube Fitting Plug

143786589
8200600066: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-417-7738
Tube To Boss Straight Adapter

144177738
Q15GE8S1/4NPTNU: RNCC: 3 | RNVC: 2
LW118-NK0804S: RNCC: 3 | RNVC: 2
8905081466NU: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-247-3263
Raccord Special

142473263
321A75-0863-20: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-213-6119
Quick Disconnect Coupling Half

142136119
S2781-1DG: RNCC: 3 | RNVC: 2
S2781: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-433-2252
Tube To Boss Straight Adapter

144332252
GE08LREDA3C: RNCC: 3 | RNVC: 2
25513331970: RNCC: 5 | RNVC: 2
GE8PLREDA3C: RNCC: 5 | RNVC: 2
GE8PLREDA3C: RNCC: 5 | RNVC: 2
431352: RNCC: 5 | RNVC: 9

18 Jul 1989

4730-14-505-5823
Fluid Passage Bolt

145055823
DE7490: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-547-8260
Tube To Hose Straight Adapter

145478260
107409: RNCC: 3 | RNVC: 2
V876226: RNCC: 5 | RNVC: 2

17 Nov 2005

4730-14-397-7512
Fluid Passage Bolt

143977512
N0189F70A: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-552-1111
Straight Tubing Connector

145521111
0249852920: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-389-9939
Fluid Passage Bolt

143899939
0000155495: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-285-1277
Fluid Flow Restrictor

142851277
270736: RNCC: 3 | RNVC: 2
270736: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-355-9428
Bulkhead Hose Connector

143559428
7189734108: RNCC: 3 | RNVC: 2
16104600: RNCC: 5 | RNVC: 2
71897341: RNCC: 5 | RNVC: 2

5 Apr 1979

4730-14-507-8489
Lubrication Fitting Adapter

145078489
138113: RNCC: 3 | RNVC: 2

21 Aug 1998

4730-14-265-9422
Pipe Flange

142659422
DLT000838: RNCC: 3 | RNVC: 2
DLT000838: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-358-8287
Threaded Tube Fitting Plug

143588287
510029: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-484-3550
Quick-Disconnect Nipple

144843550
5694-42-19-B: RNCC: 3 | RNVC: 2
91739369: RNCC: 5 | RNVC: 2
91739369: RNCC: 5 | RNVC: 2

14 Nov 1996

4730-14-268-6300
Tube To Boss Straight Adapter

142686300
Q1-53-20-24X150: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-367-4994
Tube To Boss Straight Adapter

143674994
EDE53260-01-23: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-424-3418
Tube To Boss Straight Adapter

144243418
P4-1204-12-18X150: RNCC: 3 | RNVC: 2
10702643000: RNCC: 5 | RNVC: 2

19 May 1988

4730-14-262-1549
Pipe Flange

142621549
7062DJ1F1M57-5XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-347-7436
Tube To Boss Straight Adapter

143477436
Q2-12-14-20X150: RNCC: 3 | RNVC: 2
UMI14-20-150N: RNCC: 5 | RNVC: 2

1 Mar 1978

4730-14-430-4646
Tube Tee

144304646
LW306-DW5307N: RNCC: 3 | RNVC: 2
F0532S4710X0002-8789A: RNCC: 3 | RNVC: 2
S4710X0002-8789: RNCC: 5 | RNVC: 9

22 Mar 1989

4730-14-410-9774
Tube Tee

144109774
MAT164-0005F3: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-310-5638
Sediment Strainer Element

143105638
1149300112: RNCC: 3 | RNVC: 2
9300-1127: RNCC: 5 | RNVC: 2
720424: RNCC: 5 | RNVC: 9
062720424: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-222-6539
Tube Fitting Brazing Ferrule

142226539
GSM1297F1AF1BTABLEAU2D1-10I5: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-483-3764
Tuyere Ejecteur Air

144833764
V0596-48PDREP7-11-12-13-18C4: RNCC: 3 | RNVC: 2

6 Sep 1996

4730-14-573-7634
Pipe Flange

145737634
M1H-16: RNCC: 3 | RNVC: 2

8 Nov 2012

4730-14-571-0958
Flange To Tube Straight Adapter

145710958
M2821316400000: RNCC: 3 | RNVC: 2

20 Feb 2012

4730-14-367-7192

4730-14-225-2977

4730-14-462-4047
Embout De Vidange

144624047
58029: RNCC: 3 | RNVC: 9

15 Apr 1993

4730-14-274-6614

4730-14-506-1935
Threaded Tube Fitting Plug

145061935
L034: RNCC: 3 | RNVC: 2
RAQ0328: RNCC: 5 | RNVC: 2

9 Apr 1998

4730-14-392-2806
Pipe Flange

143922806
7062DD1F1F38: RNCC: 2 | RNVC: 2

21 Mar 1984

4730-14-273-5354
Pipe Flange

142735354
7062TD1F1M98-3UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-482-1899
Tube Tee

144821899
4452-0065: RNCC: 3 | RNVC: 2
IF207-065: RNCC: 5 | RNVC: 9

25 Jun 1996

4730-14-330-2271
Tube Fitting Brazing Ferrule

143302271
J00650-01-0230P006: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-416-1407
Tube Coupling

144161407
NO PRIMARY REF14-416-1407: RNCC: 3 | RNVC: 2
Z52177: RNCC: 5 | RNVC: 9

3 Jun 1987

4730-14-494-8631
Fluid Pressure Line Multiple Connector

144948631
0502150: RNCC: 3 | RNVC: 2
F300 0T 018 0175: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-307-8597

4730-14-356-6806

4730-14-248-1162

4730-14-288-4127
Pipe Flange

142884127
0157080110: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-506-8449
Hydraulic System Accessories Manifold

145068449
COLLE92876X00: RNCC: 3 | RNVC: 2

27 May 1998

4730-14-283-8535
Pipeline Flexible Spacer

142838535
DILAT0FLEX50GDF: RNCC: 3 | RNVC: 9

1 Jan 1972

4730-14-536-3556
Tube Coupling Assembly

145363556
0015020: RNCC: 3 | RNVC: 2

29 Jul 2003

4730-14-244-7190
Fluid Pressure Line Multiple Connector

142447190
0200504: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-449-6505
Hose To Boss Straight Adapter

144496505
9945401: RNCC: 3 | RNVC: 2
165501: RNCC: 5 | RNVC: 2

28 Aug 1991

4730-14-457-8925
Tube Tee

144578925
4730JCEG088,9X08: RNCC: 2 | RNVC: 2

26 Sep 1992

4730-14-269-9759

4730-14-404-2905
Pipe Flange

144042905
CROQ1-85BECNMACHN: RNCC: 3 | RNVC: 2

18 Sep 1985

4730-14-482-0123
Self-Sealing Coupling Half

144820123
96177014: RNCC: 3 | RNVC: 2

13 Jun 1996

4730-14-524-0918
Tube Fitting Insert

145240918
MR2019670102020: RNCC: 3 | RNVC: 2

26 Feb 2001

4730-14-547-9071
Special-Shaped Hose Clamp

145479071
648,3PP: RNCC: 3 | RNVC: 2
V950534: RNCC: 5 | RNVC: 2

23 Nov 2005

4730-14-524-8796
Quick Disconnect Coupling Half

145248796
421875: RNCC: 3 | RNVC: 2

25 Apr 2001

4730-14-422-7576
Tube To Boss Straight Adapter

144227576
GE10PLR: RNCC: 3 | RNVC: 2
91690880: RNCC: 5 | RNVC: 2

17 Mar 1988

4730-14-316-8529
Pipe Flange

143168529
30067: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-474-9655
Special-Shaped Hose Clamp

144749655
454216: RNCC: 3 | RNVC: 2
EA20129: RNCC: 5 | RNVC: 2

16 Mar 1995

4730-14-355-5318
Tube Coupling Assembly

143555318
3601SB16A: RNCC: 3 | RNVC: 2
3601SB16A: RNCC: 5 | RNVC: 9

19 Mar 1979

4730-14-466-2913
Fluid Flow Restrictor

144662913
A82261: RNCC: 3 | RNVC: 2

3 Nov 1993

4730-14-550-8426
Flange To Tube Straight Adapter

145508426
RA1M622332804A1: RNCC: 3 | RNVC: 2

20 Jul 2006

4730-14-430-8864
Tube Tee

144308864
T14SA3C: RNCC: 3 | RNVC: 2
T14SA3C: RNCC: 3 | RNVC: 9
T14PS: RNCC: 5 | RNVC: 9

29 Mar 1989

4730-14-525-6284
Tube Union

145256284
20 236 911 0170: RNCC: 3 | RNVC: 2
202369110170: RNCC: 5 | RNVC: 2

14 Jun 2001

4730-14-319-5704
Prise De Manostat

143195704
HM44211-1: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-322-8041

4730-14-528-9997
Fluid-Emulsion Spray Nozzle

145289997
1/4TT-SS+4006-SS+11750-SS-5: RNCC: 3 | RNVC: 2

27 Feb 2002

4730-14-333-5230
Barillet A 5 Voies

143335230
GSM163-021F17: RNCC: 3 | RNVC: 2
GSM163-21F17: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-457-1043
Quick-Disconnect Nipple

144571043
ST400S57P84-288: RNCC: 3 | RNVC: 2

6 Aug 1992

4730-14-427-0308
Pipe Flange

144270308
MAT162-0022DN20MALE: RNCC: 3 | RNVC: 2
MAT162-0022F1: RNCC: 3 | RNVC: 2

5 Oct 1988

4730-14-357-3451
Self-Sealing Coupling Half

143573451
9949252: RNCC: 3 | RNVC: 2
9949252A: RNCC: 5 | RNVC: 2
TAH355S5-712-5S: RNCC: 5 | RNVC: 2
85-688-3991: RNCC: 6 | RNVC: 9

7 Jun 1979

4730-14-224-3896
Tube Fitting Brazing Ferrule

142243896
GSM163-002DETNE: RNCC: 3 | RNVC: 2
GSM163-02DETNE: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-356-8438
Tube Coupling

143568438
509644-00: RNCC: 3 | RNVC: 2
509644: RNCC: 5 | RNVC: 2
SOG509644-00: RNCC: 5 | RNVC: 9
85-689-9478: RNCC: 6 | RNVC: 9

15 May 1979

4730-14-040-5253
Raccord

140405253
M5BA521-65-09: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-228-6935
Tube Coupling

142286935
GSM1297FC1TABLEAU1D1-36: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-211-5896

4730-14-496-4938
Graisseur

144964938
5135: RNCC: 3 | RNVC: 2
F300 0T 021 5958: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-576-1364
Pipe To Tube Straight Adapter

145761364
0519371: RNCC: 3 | RNVC: 2

31 May 2013

4730-14-576-1866
Flange Tee

145761866
M2821352600000: RNCC: 3 | RNVC: 2

4 Jun 2013

4730-14-321-7413

4730-14-330-8792

4730-14-281-1976

4730-14-525-7137
Lubrication Fitting

145257137
20 242 524 1170: RNCC: 3 | RNVC: 2
920 0931: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-515-9064
Lubrication Fitting

145159064
55 721: RNCC: 3 | RNVC: 2
5002 028: RNCC: 3 | RNVC: 2

26 Aug 1999

4730-14-515-3881
Tube To Boss Straight Adapter

145153881
6200400: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-515-4410
Tube To Boss Straight Adapter

145154410
HP250RMF1214GALVA: RNCC: 3 | RNVC: 2
SOAHP250RMF1214GALVA: RNCC: 5 | RNVC: 9

13 Jul 1999

4730-14-546-3540
Threaded Tube Fitting Plug

145463540
40300001219: RNCC: 3 | RNVC: 2

28 Jun 2005

4730-14-540-8027
Hose To Gas Fitting Straight Adapter

145408027
1823 10 13: RNCC: 3 | RNVC: 2
18231013: RNCC: 5 | RNVC: 2

23 Apr 2004

4730-14-347-4083
Quick Disconnect Coupling Assembly

143474083
15-21: RNCC: 3 | RNVC: 2

1 Mar 1978

4730-14-561-1431
Tube Tee

145611431
TA 6S: RNCC: 3 | RNVC: 2
02101021: RNCC: 5 | RNVC: 2

19 Jun 2009

4730-14-381-0418
Tube To Boss Straight Adapter

143810418
89050810: RNCC: 3 | RNVC: 2

14 Dec 1982

4730-14-278-3100

4730-14-550-1268
Quick-Disconnect Nipple

145501268
GS47055: RNCC: 3 | RNVC: 2

1 Jun 2006

4730-14-224-9505
Lubricating Oil Cup

142249505
3427400000: RNCC: 3 | RNVC: 2
0003020703: RNCC: 5 | RNVC: 2
WAM6F1Z: RNCC: 5 | RNVC: 9
3020703: RNCC: 5 | RNVC: 9
0003020703: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-514-6511
Tube Coupling

145146511
10000D30524: RNCC: 3 | RNVC: 2

4 Jun 1999

4730-14-576-4747
Non-Metallic Connecting Sleeve

145764747
ABS0778G1612-01: RNCC: 1 | RNVC: 2
ABS0778G1612-01: RNCC: 3 | RNVC: 2
ABS0778G1612-01: RNCC: 5 | RNVC: 2

20 Jun 2013

4730-14-294-2259

4730-14-408-5489
Corps Usine

144085489
165385: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-215-1538
Raccord Special Equ

142151538
620VBS33: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-215-1539

4730-14-408-4392
Tube To Boss Straight Adapter

144084392
4730AJ4.3DN10NU: RNCC: 2 | RNVC: 2
MEC10810: RNCC: 3 | RNVC: 2
Q15GE10S1/4BSPNU: RNCC: 3 | RNVC: 2
8901101366NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-301-1251
Tube Repair Plug

143011251
85-00-03-18108: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-549-6885
Quick Disconnect Coupling Half

145496885
PIA 06.1010/LD: RNCC: 3 | RNVC: 2

26 Apr 2006

4730-14-494-6950
Fluid Pressure Line Multiple Connector

144946950
NO PRIMARY REF14-494-6950: RNCC: 3 | RNVC: 2
01110561: RNCC: 5 | RNVC: 9
F300 0T 017 7924: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-339-8982
Tube Coupling Assembly

143398982
0-3601H40A: RNCC: 3 | RNVC: 2
0-3601H40A: RNCC: 5 | RNVC: 9
85-688-9372: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-14-378-1655
Quick Disconnect Coupling Half

143781655
RBE06-7808/IC: RNCC: 3 | RNVC: 2
RBE06-7808IC: RNCC: 5 | RNVC: 2
91642431: RNCC: 5 | RNVC: 2

20 Jul 1982

4730-14-420-0326
Tube To Gas Fitting Straight Adapter

144200326
13-12-8-13: RNCC: 3 | RNVC: 2
UFA12X8-13N: RNCC: 3 | RNVC: 2
6A12-8-13: RNCC: 3 | RNVC: 2
460-450: RNCC: 5 | RNVC: 2

18 Nov 1987

4730-14-344-2799
Tube Tee

143442799
105A8-8-13CYL: RNCC: 3 | RNVC: 2
121551: RNCC: 3 | RNVC: 2
1809-8-8-13CYLNN: RNCC: 3 | RNVC: 2
TORSA8X8-13N: RNCC: 3 | RNVC: 2

10 Aug 1977

4730-14-534-0639
Tube-Hose Fitting Compression Sleeve

145340639
B4-76: RNCC: 3 | RNVC: 2
EN001993: RNCC: 6 | RNVC: 9

12 Mar 2003

4730-14-422-8598
Fluid Pressure Line Multiple Connector

144228598
WH12SRA3C: RNCC: 3 | RNVC: 2
WH12SRA3C: RNCC: 3 | RNVC: 9
WHO12-PSR: RNCC: 5 | RNVC: 9

23 Mar 1988

4730-14-390-6276
Tube To Boss Straight Adapter

143906276
RCN05-10-13: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-381-0402
Quick Disconnect Coupling Half

143810402
E29-573-26X34MALEEQUIPE: RNCC: 2 | RNVC: 2

14 Dec 1982

4730-14-478-3862
Straight Tubing Connector

144783862
525.9262-1L: RNCC: 3 | RNVC: 2

26 Oct 1995

4730-14-560-9006
Pipe Union

145609006
8011 L08 13: RNCC: 3 | RNVC: 2
23439: RNCC: 5 | RNVC: 2

28 May 2009

4730-14-516-4155
Anchor And Reinforcement Pipe Clamp

145164155
3617.089: RNCC: 3 | RNVC: 2
3617.089: RNCC: 3 | RNVC: 2

22 Sep 1999

4730-14-395-7129
Fluid Passage Bolt

143957129
9944100600: RNCC: 3 | RNVC: 2

30 Oct 1984

4730-14-335-1378
Pipeline Flexible Spacer

143351378
I131NTH200PN16: RNCC: 2 | RNVC: 2
DILNTH200PN16: RNCC: 3 | RNVC: 2
DILNTH200PN16: RNCC: 5 | RNVC: 9

3 Jun 1976

4730-14-214-5681
Fluid Pressure Line Multiple Connector

142145681
0000112799: RNCC: 3 | RNVC: 2
0000112799: RNCC: 5 | RNVC: 9
112799: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-347-8766
Tube To Boss Straight Adapter

143478766
206562: RNCC: 3 | RNVC: 2

1 Mar 1978

4730-14-346-0392

4730-14-561-6613
Flexible Tube Coupling Assembly

145616613
4G6FDLORX: RNCC: 3 | RNVC: 2
GAH4G6FDLORX: RNCC: 5 | RNVC: 2

18 Aug 2009

4730-14-567-2527
Bulkhead Hose Connector

145672527
80 008: RNCC: 3 | RNVC: 2

25 Feb 2011

4730-14-431-6063
Quick Disconnect Plug

144316063
721210101: RNCC: 3 | RNVC: 2
4F868: RNCC: 5 | RNVC: 1
89174200: RNCC: 5 | RNVC: 2
721210101: RNCC: 5 | RNVC: 9

26 Apr 1989

4730-14-576-3831
Tube Nipple

145763831
P60815778: RNCC: 3 | RNVC: 2

14 Jun 2013

4730-14-323-4845
Tube To Boss Straight Adapter

143234845
0210170210: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-568-9790
Tube Tee

145689790
TRS2218: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-223-5703
Collier Tuyau Flexi

142235703
5999095: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-222-6528
Tube Fitting Brazing Ferrule

142226528
GSM1297F1AF1BTABLEAU1D1-25I20: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-268-5024
Return Tube Bend

142685024
A49180B57ASJ: RNCC: 2 | RNVC: 2
2D180-57MM: RNCC: 3 | RNVC: 2
E29-043-57MM180: RNCC: 5 | RNVC: 2
2D180-57MM: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-350-1000

4730-14-226-6505
Tube Tee

142266505
17-6SD: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-404-9327
Tube Coupling Assembly

144049327
3851S16X12A: RNCC: 3 | RNVC: 2
3851S16X12A: RNCC: 5 | RNVC: 9

20 Nov 1985

4730-14-438-3827
Tube To Boss Straight Adapter

144383827
4730HL-1DE21,3: RNCC: 2 | RNVC: 2
Y07134-01-0000P001DE21,3: RNCC: 3 | RNVC: 2

19 Mar 1990

4730-14-325-8910
Tube Tee

143258910
TE22-8-10X6-8X8-10: RNCC: 3 | RNVC: 2
TE22-8-10X6-8X8-10: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-303-4807
Fluid Pressure Line Multiple Connector

143034807
501-800-185-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-416-5078
Tube To Boss Straight Adapter

144165078
4730AB4.4DN14NU: RNCC: 2 | RNVC: 2
LV117-NS1406S: RNCC: 3 | RNVC: 2
84051417NU: RNCC: 5 | RNVC: 2

10 Jun 1987

4730-14-424-9682
Tube Coupling

144249682
SKA20: RNCC: 3 | RNVC: 2
SKA20: RNCC: 3 | RNVC: 9

16 Jun 1988

4730-14-365-3099

4730-14-301-5323

4730-14-452-1514
Tube To Gas Fitting Straight Adapter

144521514
A580-001: RNCC: 3 | RNVC: 2

18 Dec 1991

4730-14-492-1077
Tube To Boss Straight Adapter

144921077
NO PRIMARY REF14-492-1077: RNCC: 3 | RNVC: 2
03-0307: RNCC: 5 | RNVC: 9
F300 0T 006 9529: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-352-3384
Fluid Pressure Line Multiple Connector

143523384
B07DA1050-020: RNCC: 3 | RNVC: 2
B07DA1050-020: RNCC: 5 | RNVC: 2
B07DA1050-020: RNCC: 5 | RNVC: 9

16 Oct 1978

4730-14-561-1229
Hose Clamp

145611229
ABS0901-030: RNCC: 1 | RNVC: 2
901030: RNCC: 3 | RNVC: 2
ABS0901-030: RNCC: 5 | RNVC: 2
ABS0901-030: RNCC: 5 | RNVC: 2
ABS0901-030: RNCC: 5 | RNVC: 2
ABS0901-030: RNCC: 5 | RNVC: 9

17 Jun 2009

4730-14-505-3357
Tube Union

145053357
GE25-PSM-ED-0MD: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-457-7322
Quick-Disconnect Nipple

144577322
0372-42-10116: RNCC: 3 | RNVC: 2

17 Sep 1992

4730-14-203-6466
Manchette

142036466
PCA20: RNCC: 3 | RNVC: 2

1 Jan 1963

4730-14-256-5480

4730-14-263-0898
Passage De Cloison

142630898
PCB14: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-217-9364

4730-14-460-7341
Tube To Boss Straight Adapter

144607341
1080140004: RNCC: 3 | RNVC: 2
1080140004: RNCC: 5 | RNVC: 2

8 Feb 1993

4730-14-523-4435
Tube To Boss Straight Adapter

145234435
MAVE08SRA3C: RNCC: 3 | RNVC: 2
MAVE08SRA3C: RNCC: 3 | RNVC: 9

22 Jan 2001

4730-14-528-9148
Tube Tee

145289148
8938509700: RNCC: 3 | RNVC: 2

22 Feb 2002

4730-14-529-8711
Lubrication Fitting

145298711
M8FHYSPH98870000: RNCC: 3 | RNVC: 2
472462: RNCC: 3 | RNVC: 2

17 Apr 2002

4730-14-466-4770
Tube Union

144664770
45560042: RNCC: 3 | RNVC: 9

15 Nov 1993

4730-14-295-3378
Fluid Pressure Line Multiple Connector

142953378
341A52-5000-20: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-426-7684
Tube Tee

144267684
4730HEING042,4X3,6-33,7X3,2: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-504-9026
Pipeline Flexible Spacer

145049026
KR320WG-ROUGE-DN65PN16: RNCC: 3 | RNVC: 2
ERVDN65PN10JAUNE: RNCC: 3 | RNVC: 2
GR1/65/KR320-WG/P/PN16: RNCC: 3 | RNVC: 2
ERVJAUNE65-16: RNCC: 3 | RNVC: 2
53DO1934-KGZ-DN65PN16: RNCC: 3 | RNVC: 2
DILATOFLEX-K-GZ-DN65-PN16: RNCC: 3 | RNVC: 2
97/10031-ERV-JAUNE-DN65PN16: RNCC: 3 | RNVC: 9
ERV-JAUNE-DN65PN16: RNCC: 3 | RNVC: 9
SYQ3799: RNCC: 5 | RNVC: 2
DK065/GZ4/PN16: RNCC: 5 | RNVC: 2

2 Jun 1999

4730-14-365-9208

4730-14-479-5297
Tube To Boss Straight Adapter

144795297
412810: RNCC: 3 | RNVC: 2
412810: RNCC: 5 | RNVC: 2

17 Jan 1996

4730-14-328-2576
Tube Coupling

143282576
ZA29C9XL: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-443-7030
Tube-Hose Fitting Compression Sleeve

144437030
0400390010: RNCC: 3 | RNVC: 2

5 Dec 1990

4730-14-355-1278
Tube Tee

143551278
2547: RNCC: 3 | RNVC: 9

19 Mar 1979

4730-14-544-6257
Tube To Boss Straight Adapter

145446257
0144652007: RNCC: 3 | RNVC: 2
073105012012017: RNCC: 5 | RNVC: 2

14 Feb 2005

4730-14-429-8369
Tube To Boss Straight Adapter

144298369
2216110C: RNCC: 3 | RNVC: 2

14 Feb 1989

4730-14-374-1148
Tube Tee

143741148
S6BXS10: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-526-8189
Lubrication Fitting

145268189
5005097015: RNCC: 3 | RNVC: 2

7 Sep 2001

4730-14-448-9854
Tube Tee

144489854
XT12PS: RNCC: 3 | RNVC: 2

24 Jul 1991

4730-14-424-7064
Tube To Hose Straight Adapter

144247064
18220607: RNCC: 3 | RNVC: 2
AV06070000N59D0: RNCC: 5 | RNVC: 2

7 Jun 1988

4730-14-325-8396
Tube Tee

143258396
R7610Z73: RNCC: 3 | RNVC: 2
R10X10MX10: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-370-5054
Fluid Pressure Line Multiple Connector

143705054
158114: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-322-7393
Sediment Strainer Element

143227393
A36009: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-232-3711
Tube To Boss Straight Adapter

142323711
0000123561: RNCC: 3 | RNVC: 2
0000123561: RNCC: 5 | RNVC: 9
123561: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-424-7285
Tube Coupling

144247285
37451: RNCC: 3 | RNVC: 2

7 Jun 1988

4730-14-042-3581
Bulkhead Hose Connector

140423581
R8610: RNCC: 3 | RNVC: 2

16 Jun 1977

4730-14-476-7829
Quick Disconnect Coupling Half

144767829
MEPK324500004B: RNCC: 2 | RNVC: 2

29 Jun 1995

4730-14-449-6832
Flared Tube Fitting Conical Seal

144496832
920 04 00: RNCC: 3 | RNVC: 2

2 Sep 1991

4730-14-405-7945
Tube Coupling

144057945
NO PRIMARY REF14-405-7945: RNCC: 3 | RNVC: 2
11-010R2: RNCC: 5 | RNVC: 9

4 Dec 1985

4730-14-363-2425
Tube Coupling

143632425
99025007: RNCC: 3 | RNVC: 2
85-657-5650: RNCC: 6 | RNVC: 9

3 Apr 1980

4730-14-360-7338
Tube To Boss Straight Adapter

143607338
12-10JE10X100: RNCC: 3 | RNVC: 2

19 Dec 1979

4730-14-277-6304
Tube To Boss Straight Adapter

142776304
UMA10-14X1-25: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-457-8009
Pipe Flange

144578009
4730JADN150-11B2S: RNCC: 2 | RNVC: 2

24 Sep 1992

4730-14-451-5008
Fluid Passage Bolt

144515008
111-92-46-21: RNCC: 3 | RNVC: 2
111-92-46-21: RNCC: 5 | RNVC: 9
5305-65-0000042: RNCC: 6 | RNVC: 9

21 Nov 1991

4730-14-500-4433
Tube To Boss Straight Adapter

145004433
XGE12-S0MDA3C: RNCC: 3 | RNVC: 2
XGE12S0MDA3C: RNCC: 5 | RNVC: 2
F300 0T 024 4599: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-304-9285
Grain De Raccord

143049285
34727: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-367-7297

4730-14-263-2840
Compensateur De Dil

142632840
D8326-29310B: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-242-7994
Tube Tee

142427994
NG40901-4APL20N0M1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-457-1280
Tube Union

144571280
METALGRIP 33.7 EPDM 16 BAR INOX: RNCC: 3 | RNVC: 2
1800331: RNCC: 5 | RNVC: 2

11 Aug 1992

4730-14-395-3681
Embout A Souder

143953681
N0162F11A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-298-4556

4730-14-256-6018

4730-14-385-9229

4730-14-560-9317
Suction Strainer

145609317
SF38: RNCC: 3 | RNVC: 2

3 Jun 2009

4730-14-385-7441
Tube To Gas Fitting Straight Adapter

143857441
338305: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-573-6479
Air Line Manifold

145736479
3310 06 13: RNCC: 3 | RNVC: 2

29 Oct 2012

4730-14-572-7415
Pipeline Flexible Spacer

145727415
FR-26058800036: RNCC: 3 | RNVC: 2
26058800036: RNCC: 5 | RNVC: 2

30 Jul 2012

4730-14-572-9562
Tube Elbow

145729562
EVW06LCF: RNCC: 3 | RNVC: 2
427368: RNCC: 5 | RNVC: 2

30 Aug 2012

4730-14-255-2604
Ecrou De Presse-Eto

142552604
02491200: RNCC: 3 | RNVC: 2
24912: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-370-0080
Tube To Boss Straight Adapter

143700080
9952631: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-263-7483
Tube Coupling

142637483
DF12: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-421-1918
Hose To Gas Fitting Straight Adapter

144211918
01232527: RNCC: 3 | RNVC: 2

6 Jan 1988

4730-14-270-2479
Fluid Pressure Line Multiple Connector

142702479
JU10: RNCC: 3 | RNVC: 2
0300318170: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-422-8677
Tube Tee

144228677
TI10S: RNCC: 3 | RNVC: 9

23 Mar 1988

4730-14-381-0405
Tube Tee

143810405
130CU18: RNCC: 3 | RNVC: 2

14 Dec 1982

4730-14-287-3250
Quick Disconnect Coupling Assembly

142873250
SJS50ADB: RNCC: 3 | RNVC: 2
SJS50A: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-378-6599
Tube To Boss Straight Adapter

143786599
84052534: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-422-7284
Tube To Boss Straight Adapter

144227284
0298561680: RNCC: 3 | RNVC: 2

17 Mar 1988

4730-14-422-0851
Fluid Pressure Line Multiple Connector

144220851
56060Z: RNCC: 3 | RNVC: 2

23 Feb 1988

4730-14-543-8488
Tube To Boss Straight Adapter

145438488
560502423: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-287-7906
Pipe Flange

142877906
RUAN7625M913P7D: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-553-4789
Flange To Boss Elbow

145534789
0000371500: RNCC: 3 | RNVC: 2

5 Apr 2007

4730-14-474-7717
Tube Tee

144747717
12S: RNCC: 3 | RNVC: 2

1 Mar 1995

4730-14-312-8262
Tube To Boss Straight Adapter

143128262
0249850870: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-247-1697

4730-14-247-1694

4730-14-232-2783

4730-14-474-5699
Tube To Boss Straight Adapter

144745699
AABR3-4S6EFM25NU: RNCC: 3 | RNVC: 2
851F35556: RNCC: 5 | RNVC: 2
88101310: RNCC: 5 | RNVC: 2
519 90 30 572 11: RNCC: 5 | RNVC: 2

22 Feb 1995

4730-14-471-6562
Tube To Boss Straight Adapter

144716562
5A6L5-10C0: RNCC: 3 | RNVC: 2
105L20091: RNCC: 5 | RNVC: 2
81111801: RNCC: 5 | RNVC: 2
0024331403: RNCC: 5 | RNVC: 2
0024331403: RNCC: 6 | RNVC: 9

7 Sep 1994

4730-14-311-9787
Tube To Boss Straight Adapter

143119787
73-071-103: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-402-0090
Tube To Hose Straight Adapter

144020090
272091: RNCC: 3 | RNVC: 2
148196-61: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-501-0901
Fluid Passage Bolt

145010901
A13 712 150: RNCC: 3 | RNVC: 2
2214-712-150: RNCC: 5 | RNVC: 2
91726443: RNCC: 5 | RNVC: 2
F300 0T 025 1256: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-249-6765
Chapeau De Protecti

142496765
2-02530: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-212-2178
Sediment Strainer Element

142122178
5080-3: RNCC: 3 | RNVC: 2
5080-3: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-264-6796

4730-14-512-6370
Pipe Flange

145126370
NO PRIMARY REF14-512-6370: RNCC: 3 | RNVC: 2
NNP 4730864526286: RNCC: 5 | RNVC: 9

17 Feb 1999

4730-14-230-0667
Tube-Hose Fitting Compression Sleeve

142300667
A10-61319: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-507-4125
Tube Tee

145074125
LL300-CS12L: RNCC: 3 | RNVC: 2

6 Jul 1998

4730-14-521-1276
Tube To Boss Straight Adapter

145211276
3482-08-00: RNCC: 3 | RNVC: 2
5005330232: RNCC: 5 | RNVC: 2

11 Jul 2000

4730-14-359-2793
Tube To Boss Straight Adapter

143592793
8800: RNCC: 3 | RNVC: 2
85-688-9520: RNCC: 6 | RNVC: 9

2 Oct 1979

4730-14-442-7046
Tube To Boss Straight Adapter

144427046
91468429: RNCC: 1 | RNVC: 2
52-20-15-21C0: RNCC: 3 | RNVC: 2

24 Oct 1990

4730-14-478-0332
Fluid Flow Restrictor

144780332
TB30-41052-100: RNCC: 3 | RNVC: 2
TB30-41052-100: RNCC: 5 | RNVC: 2

9 Oct 1995

4730-14-424-6474
Tube To Boss Straight Adapter

144246474
LW124-CS2106N: RNCC: 3 | RNVC: 2
460-488: RNCC: 5 | RNVC: 2
AAG21X12-17N: RNCC: 5 | RNVC: 2

2 Jun 1988

4730-14-281-3131
Ecrou-Raccord Equip

142813131
156320: RNCC: 3 | RNVC: 2
650-485-049-0: RNCC: 5 | RNVC: 2
156320A: RNCC: 5 | RNVC: 2
156320B: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-237-2215

4730-14-313-1132
Quick Disconnect Coupling Half

143131132
QST15-5: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-230-1972

4730-14-367-5067

4730-14-488-1259
Tube Union

144881259
10301474: RNCC: 3 | RNVC: 2

18 Apr 1997

4730-14-571-5066
Exhaust-Intake Pneumatic Muffler

145715066
0673 00 10: RNCC: 3 | RNVC: 2

30 Mar 2012

4730-14-264-3079
Tube Coupling

142643079
272 1-2Z: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-375-5213
Tube To Boss Straight Adapter

143755213
F4BXS14 1-2: RNCC: 3 | RNVC: 2
F4BXS14-1-2: RNCC: 5 | RNVC: 9

26 Feb 1982

4730-14-372-2697
Tube To Boss Straight Adapter

143722697
F3BRAB8-1/4: RNCC: 3 | RNVC: 2
F3BRAB8-1/4: RNCC: 3 | RNVC: 2
F3RAB8 1-4: RNCC: 5 | RNVC: 2
F3RAB8X1-4: RNCC: 5 | RNVC: 2

1 Sep 1981

4730-14-344-9784
Tube To Boss Straight Adapter

143449784
1DM20 1-2BGS: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-403-0330
Tube To Boss Straight Adapter

144030330
10-6FMTXS: RNCC: 3 | RNVC: 2
FBTXS16-3-8: RNCC: 5 | RNVC: 2

25 Jul 1985

4730-14-427-8478
Tube Union

144278478
053.491.200: RNCC: 3 | RNVC: 2
053491200: RNCC: 5 | RNVC: 9

17 Nov 1988

4730-14-527-4037
Tube To Boss Straight Adapter

145274037
H77741: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-371-5208
Tube To Boss Straight Adapter

143715208
24990188: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-432-2538
Tube Repair Plug

144322538
NCHX01H013EF5REP5TAMPON: RNCC: 3 | RNVC: 2
NCHX01H013DF5REP5TAMPON: RNCC: 5 | RNVC: 2

31 May 1989

4730-14-301-0539
Fluid Pressure Line Multiple Connector

143010539
1060670012: RNCC: 3 | RNVC: 2
1060670012: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-212-3529
Tube Coupling Assembly

142123529
3601S20A: RNCC: 3 | RNVC: 2
3601S20A: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-246-3526
Pipe Flange

142463526
70868023: RNCC: 3 | RNVC: 2
868023: RNCC: 5 | RNVC: 9
70868023: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-369-9689
Fluid Pressure Line Multiple Connector

143699689
30944: RNCC: 3 | RNVC: 9

18 May 1981

4730-14-395-8872

4730-14-367-7255

4730-14-559-8906
Tube Tee

145598906
R40XS20-3/4: RNCC: 3 | RNVC: 2

2 Mar 2009

4730-14-249-6842
Raccord Special

142496842
2-05464: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-325-3831
Embase Pour Tube

143253831
H43790-4: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-267-3932
Fluid Pressure Line Multiple Connector

142673932
608-16-90EJBR: RNCC: 3 | RNVC: 2
9567141602: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-410-7709
Quick Disconnect Coupling Half

144107709
SBA08-5103: RNCC: 3 | RNVC: 2

9 Jul 1986

4730-14-476-6234
Tube To Boss Straight Adapter

144766234
RV3E10-6E12JMA: RNCC: 3 | RNVC: 2

21 Jun 1995

4730-14-325-0749
Tube To Boss Straight Adapter

143250749
F751-016: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-370-0649
Tube To Boss Straight Adapter

143700649
7133-031-00: RNCC: 3 | RNVC: 9
ROT7133-031-00: RNCC: 5 | RNVC: 9

18 May 1981

4730-14-308-1064

4730-14-445-8607
Raccord Spherique

144458607
9932100080: RNCC: 3 | RNVC: 2

27 Feb 1991

4730-14-239-4994
Reducteur Pour Tube

142394994
0176-525126: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-462-9364
Type 1 Tape

144629364
89160774: RNCC: 3 | RNVC: 9

7 May 1993

4730-14-402-2732
Eq Tuyau Adaptateur

144022732
NO PRIMARY REF14-402-2732: RNCC: 3 | RNVC: 2
R3-8GAZ-EMBOUTCUPRO-ALU: RNCC: 5 | RNVC: 9

26 Jun 1985

4730-14-229-2712

4730-14-356-8443
Tube Coupling

143568443
554245-00: RNCC: 3 | RNVC: 2
554245: RNCC: 5 | RNVC: 2
SOG554245-00: RNCC: 5 | RNVC: 9
85-689-9482: RNCC: 6 | RNVC: 9

15 May 1979

4730-14-428-9288
Hose To Boss Straight Adapter

144289288
AF152-13: RNCC: 3 | RNVC: 2

28 Dec 1988

4730-14-475-7464
Assemblage Bride

144757464
UA88012DE48-11LSPN-11LSFN: RNCC: 2 | RNVC: 2

27 Apr 1995

4730-14-345-1942
Bulkhead Hose Connector

143451942
FD1B530-02-03: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-444-5458
Sediment Strainer Body

144445458
P109164H: RNCC: 3 | RNVC: 2
F300 0T 005 9235: RNCC: 6 | RNVC: 9

15 Jan 1991

4730-14-543-4632
Tube Coupling

145434632
PE65425DD10: RNCC: 3 | RNVC: 2

4 Nov 2004

4730-14-522-1448
Tube To Boss Swivel Joint

145221448
0000303020: RNCC: 3 | RNVC: 2

4 Oct 2000

4730-14-278-8662
Fluid Pressure Line Multiple Connector

142788662
0249856450: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-380-4467
Sediment Strainer Element

143804467
B356990: RNCC: 3 | RNVC: 2
A356990: RNCC: 5 | RNVC: 2
0003458211: RNCC: 5 | RNVC: 2
0870229200: RNCC: 5 | RNVC: 2
DBAB356990: RNCC: 5 | RNVC: 9
356990: RNCC: 5 | RNVC: 9
3458211: RNCC: 5 | RNVC: 9
356990: RNCC: 5 | RNVC: 9
A356990: RNCC: 5 | RNVC: 9

8 Nov 1982

4730-14-516-4379
Tube Union

145164379
MAT162-0232F7REPA: RNCC: 3 | RNVC: 2
NO PRIMARY REF14-516-4379: RNCC: 3 | RNVC: 2
1850383: RNCC: 5 | RNVC: 2
GRIP L38.0NBR INOX: RNCC: 5 | RNVC: 2

24 Sep 1999

4730-14-563-8069
Tube To Boss Straight Adapter

145638069
GE20SR1/2CF: RNCC: 3 | RNVC: 2

17 Mar 2010

4730-14-554-4524
Non-Metallic Connecting Sleeve

145544524
09930212: RNCC: 3 | RNVC: 2

10 Jul 2007

4730-14-577-9591
Tube To Hose Elbow

145779591
COL0000001: RNCC: 3 | RNVC: 2
4730MT0200168: RNCC: 6 | RNVC: 9

21 Oct 2013

4730-14-572-5177
Water Feeder Manifold

145725177
003327: RNCC: 3 | RNVC: 2

10 Jul 2012

4730-14-502-4003
Quick Disconnect Coupling Half

145024003
484989: RNCC: 3 | RNVC: 2

11 Dec 1997

4730-14-518-3537
Tube To Boss Straight Adapter

145183537
REG51: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-374-7784
Bulkhead Hose Connector

143747784
0264350270: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-524-4996
Quick Disconnect Coupling Assembly Set

145244996
6301LSV: RNCC: 3 | RNVC: 2

21 Mar 2001

4730-14-283-1439
Corps App Essais

142831439
T0120BBN1AREP4: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-438-5131
Flange To Tube Elbow

144385131
DA2C521001450: RNCC: 3 | RNVC: 2

21 Mar 1990

4730-14-230-4921

4730-14-216-1149

4730-14-342-1532

4730-14-261-8479
Pipe Flange

142618479
RUHB3-4: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-416-4235
Tube To Boss Straight Adapter

144164235
AF3RAB10-3/8: RNCC: 3 | RNVC: 2
AF3RAB10-3/8: RNCC: 3 | RNVC: 9

10 Jun 1987

4730-14-386-9960
Tube Tee

143869960
R3BPLB6X1-1-8: RNCC: 3 | RNVC: 2
R3BPLB6X1-1-8: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-216-3850
Raccord Special

142163850
501-205-080-0: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-390-0059
Tube To Boss Straight Adapter

143900059
DHS613-618-43: RNCC: 3 | RNVC: 2
N7729266843: RNCC: 5 | RNVC: 2

26 Jan 1984

4730-14-318-0923
Pipe Flange

143180923
M3C702-047: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-461-0865
Pipe Flange

144610865
E29203-01A-PN16DN15Z3CND18-12: RNCC: 2 | RNVC: 2
4730JEDN015: RNCC: 5 | RNVC: 2

24 Feb 1993

4730-14-374-1737
Tube To Boss Straight Adapter

143741737
703A94-7530-00: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-519-4258
Raccord Pompe

145194258
MTFLXM9006600A: RNCC: 3 | RNVC: 2

17 Mar 2000

4730-14-366-6033

4730-14-363-9885

4730-14-360-1688
Support De Raccord

143601688
A11A230352010: RNCC: 3 | RNVC: 2

31 Oct 1979

4730-14-329-2812

4730-14-343-7991

4730-14-400-2464
Fluid Passage Bolt

144002464
0000281070: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-387-3151
Fluid Filter Element

143873151
438070: RNCC: 3 | RNVC: 2
438070: RNCC: 5 | RNVC: 9

15 Sep 1983

4730-14-221-2195
Raccord A Joint Cou

142212195
GSM1297FE8-1TABLEAU2: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-450-2506
Tube To Boss Straight Adapter

144502506
S2949CD: RNCC: 3 | RNVC: 2

25 Sep 1991

4730-14-213-7721
Fluid Passage Bolt

142137721
0000290020: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-530-7602
Pipe To Hose Straight Adapter

145307602
839127030: RNCC: 3 | RNVC: 2

3 Jul 2002

4730-14-533-2446
Tube To Boss Straight Adapter

145332446
P108556V: RNCC: 3 | RNVC: 2

29 Jan 2003

4730-14-526-9636
Tube To Boss Straight Adapter

145269636
10445753: RNCC: 3 | RNVC: 2

19 Sep 2001

4730-14-524-0293
Tube Tee

145240293
2424-49: RNCC: 3 | RNVC: 2

22 Feb 2001

4730-14-325-6809
Bulkhead Hose Connector

143256809
0000365550: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-264-6286
Pipeline Flexible Spacer

142646286
DILNH100MAR: RNCC: 3 | RNVC: 9
I131NH100MAR: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-511-0943
Tube Tee

145110943
E29591JB32AE: RNCC: 2 | RNVC: 2

2 Dec 1998

4730-14-326-8605
Tube Coupling Assembly

143268605
3601PS25A: RNCC: 3 | RNVC: 2
3601PS25A: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-314-3642
Fluid Pressure Line Multiple Connector

143143642
L352016: RNCC: 3 | RNVC: 9
352016: RNCC: 5 | RNVC: 2
36469: RNCC: 5 | RNVC: 2
0855266600: RNCC: 5 | RNVC: 2
0855266600: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-207-8506
Fluid Pressure Line Multiple Connector

142078506
1491: RNCC: 3 | RNVC: 2
512731: RNCC: 5 | RNVC: 2
328017: RNCC: 5 | RNVC: 2
8092460: RNCC: 5 | RNVC: 2
A102277: RNCC: 5 | RNVC: 2
396561017: RNCC: 5 | RNVC: 9
250833: RNCC: 5 | RNVC: 9
DBA1491: RNCC: 5 | RNVC: 9
512731: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-032-1580
Pipe Flange

140321580
CMT30E9030AF5ET6DE25REP2: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-488-8635
Hose To Boss Straight Adapter

144888635
E4750055: RNCC: 3 | RNVC: 9

10 Jun 1997

4730-14-512-5927
Tube To Boss Straight Adapter

145125927
1503002: RNCC: 3 | RNVC: 9

17 Feb 1999

4730-14-512-8185
Tube Coupling

145128185
205349: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-274-3505
Tube Tee

142743505
40343: RNCC: 3 | RNVC: 2
2263A: RNCC: 5 | RNVC: 2
0870191700: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-537-3325
Fluid Pressure Line Multiple Connector

145373325
5000788631: RNCC: 3 | RNVC: 2

20 Oct 2003

4730-14-504-5321
Flange To Hose Elbow

145045321
3571C019: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-414-5212
Flange To Hose Straight Adapter

144145212
BN324575F5DN80: RNCC: 3 | RNVC: 2

9 Feb 1987

4730-14-415-1284
Tube Tee

144151284
4730-51EGDN20: RNCC: 2 | RNVC: 2
ST2069TEDN20I47X25N: RNCC: 5 | RNVC: 2

1 Apr 1987

4730-14-376-1493
Tube-Hose Fitting Compression Sleeve

143761493
84284002: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-231-2057

4730-14-346-6764

4730-14-302-5580
Bulkhead Hose Connector

143025580
330A72-1116-21: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-403-0334
Tube To Boss Straight Adapter

144030334
F4BXS20-3-4: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-423-7674
Fuel Feeder Manifold

144237674
J9910138: RNCC: 3 | RNVC: 2
720-999-21806: RNCC: 5 | RNVC: 2
ST10138: RNCC: 5 | RNVC: 2

28 Apr 1988

4730-14-542-4752
Self-Sealing Coupling Assembly

145424752
H20-16-62BSPP: RNCC: 3 | RNVC: 2
H20-16-62BSPP: RNCC: 3 | RNVC: 9
H20-16-62BSPP: RNCC: 5 | RNVC: 9

21 Jul 2004

4730-14-541-2755

4730-14-520-7930
Tuyau Bouchon

Load More Results