What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 119 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 119 of 185

4730-14-359-6691
Pipe Flange

143596691
130108: RNCC: 3 | RNVC: 2
25120203001: RNCC: 5 | RNVC: 2

15 Oct 1979

4730-14-309-5003
Pipeline Flexible Spacer

143095003
DILATOFLEX NT 65 CCPN 16: RNCC: 3 | RNVC: 2
DILAT0FLEXNT65CCPN16: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-459-5959
Fluid Pressure Line Multiple Connector

144595959
31180519: RNCC: 3 | RNVC: 2

10 Dec 1992

4730-14-477-9462
Tube To Boss Straight Adapter

144779462
101160601050: RNCC: 3 | RNVC: 2

4 Oct 1995

4730-14-294-2512

4730-14-376-9289

4730-14-372-3889
Tube Tee

143723889
P4-1TR6X10X10: RNCC: 3 | RNVC: 2
P4-1TR10X10X6: RNCC: 5 | RNVC: 2
91496817: RNCC: 5 | RNVC: 9

1 Sep 1981

4730-14-327-5025
Tube To Boss Straight Adapter

143275025
9101384266: RNCC: 3 | RNVC: 2
CA3-38-33-42CYL: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-331-5733
Raccord De Pompe

143315733
DE389: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-361-0863

4730-14-312-3510

4730-14-382-6970
Raccordement Embout

143826970
414629: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-246-5858

4730-14-488-3323
Fluid Passage Bolt

144883323
H993302: RNCC: 3 | RNVC: 2

30 Apr 1997

4730-14-457-5565
Tube To Hose Straight Adapter

144575565
M4ZS460D8495: RNCC: 3 | RNVC: 2

10 Sep 1992

4730-14-320-6532
Fluid Pressure Line Multiple Connector

143206532
0000128539: RNCC: 3 | RNVC: 2
0000128539: RNCC: 5 | RNVC: 9
128539: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-387-3013
Bulkhead Hose Connector

143873013
106-6C10: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-547-9477
Hose To Gas Fitting Straight Adapter

145479477
45810669: RNCC: 3 | RNVC: 2

29 Nov 2005

4730-14-336-0169
Tube To Boss Straight Adapter

143360169
83355: RNCC: 3 | RNVC: 2
83355: RNCC: 5 | RNVC: 2

24 Jul 1976

4730-14-209-6305
Fluid Passage Bolt

142096305
062696: RNCC: 3 | RNVC: 2
M062696: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-538-9827
Return Tube Bend

145389827
NGM0053914501957: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-365-9197
Quick Disconnect Coupling Half

143659197
S2283CD: RNCC: 3 | RNVC: 2

4 Nov 1980

4730-14-348-1278
Pipe Flange

143481278
A11A522340021: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-360-5178
Pipe Expansion Joint

143605178
25442819800: RNCC: 3 | RNVC: 2
254428198: RNCC: 5 | RNVC: 9

23 Nov 1979

4730-14-354-7648
Fluid Pressure Line Multiple Connector

143547648
55890: RNCC: 3 | RNVC: 2

20 Feb 1979

4730-14-438-1684
Bulkhead Hose Connector

144381684
DA2C204508711U2: RNCC: 3 | RNVC: 2

7 Mar 1990

4730-14-470-9280
Pipe To Gas Fitting Straight Adapter

144709280
98B12160003: RNCC: 3 | RNVC: 2
40342759: RNCC: 5 | RNVC: 2

13 Jul 1994

4730-14-520-0909
Straight Tubing Connector

145200909
3L85-142: RNCC: 3 | RNVC: 2

10 May 2000

4730-14-278-1638

4730-14-260-0234

4730-14-365-3431

4730-14-411-9272
Mamelon

144119272
DLT113697: RNCC: 3 | RNVC: 2

17 Sep 1986

4730-14-367-7187

4730-14-514-5740
Pipeline Flexible Spacer

145145740
53-D038-19: RNCC: 3 | RNVC: 2

31 May 1999

4730-14-032-3161
Tube To Boss Straight Adapter

140323161
Q1-5GE8LR5-10CYLEQUIPE: RNCC: 3 | RNVC: 2

6 Sep 1982

4730-14-207-5856
Lubrication Fitting

142075856
NO PRIMARY REF14-207-5856: RNCC: 3 | RNVC: 2
201: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-365-9849

4730-14-562-2998
Hose Tee

145622998
10368: RNCC: 3 | RNVC: 2

13 Oct 2009

4730-14-560-7077
Pipe Tee

145607077
L1137245: RNCC: 3 | RNVC: 2
CV150515: RNCC: 5 | RNVC: 2
L1137245: RNCC: 5 | RNVC: 2

19 May 2009

4730-14-559-8893
Tube To Hose Elbow

145598893
1SA99590: RNCC: 3 | RNVC: 2

2 Mar 2009

4730-14-575-3422
Pipe Bushing

145753422
D050 03B: RNCC: 3 | RNVC: 2

28 Mar 2013

4730-14-349-7209
Fuel Feeder Manifold

143497209
0261997120: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-392-3939
Corps Filtre Ebauch

143923939
401MA0568EBAUCHE: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-307-6345
Ense Valve Jonction

143076345
DC609: RNCC: 3 | RNVC: 1

1 Jan 1974

4730-14-315-1090
Demi Manchon-Union

143151090
C0E429F17: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-471-5096
Fluid Pressure Line Multiple Connector

144715096
5010165649: RNCC: 3 | RNVC: 2
501065649: RNCC: 3 | RNVC: 2

31 Aug 1994

4730-14-362-5218
Protective Lubrication Fitting Cap

143625218
7101344: RNCC: 3 | RNVC: 2
7101344: RNCC: 5 | RNVC: 9
TKF7101344: RNCC: 5 | RNVC: 9

19 Mar 1980

4730-14-502-5980
Tube Tee

145025980
5005330189: RNCC: 3 | RNVC: 2
5005330189: RNCC: 5 | RNVC: 9

17 Dec 1997

4730-14-416-5884
Pipe Flange

144165884
4730GG-DN419: RNCC: 2 | RNVC: 2
MEC10429: RNCC: 3 | RNVC: 2
4730GG-DN419: RNCC: 5 | RNVC: 2

19 Jun 1987

4730-14-493-8269
Union Double

144938269
5005030388: RNCC: 3 | RNVC: 2
F300 0T 014 1595: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-283-1624

4730-14-328-0091

4730-14-318-3006

4730-14-365-6570
Tube Tee

143656570
508-8NU: RNCC: 3 | RNVC: 2
91759367: RNCC: 5 | RNVC: 9

8 Oct 1980

4730-14-349-3214
Fluid Passage Bolt

143493214
0000140746: RNCC: 3 | RNVC: 2
0000140746: RNCC: 5 | RNVC: 9
140746: RNCC: 5 | RNVC: 9

22 May 1978

4730-14-395-3711
Tube To Gas Fitting Straight Adapter

143953711
N0189F45A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-381-1248
Fluid Pressure Line Multiple Connector

143811248
351161: RNCC: 3 | RNVC: 2
DBA351161: RNCC: 5 | RNVC: 9

25 Jan 1983

4730-14-553-3930
Bulkhead Hose Connector

145533930
M4721302920000: RNCC: 3 | RNVC: 2
M4721302920000: RNCC: 5 | RNVC: 2

29 Mar 2007

4730-14-504-0618
Tube Coupling

145040618
NNP4730878750165: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-327-6175
Bulkhead Hose Connector

143276175
0264351110: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-515-4412
Tube To Boss Straight Adapter

145154412
HP250RMF14150X14GALVA: RNCC: 3 | RNVC: 2
SOAHP250RMF14150X14GALVA: RNCC: 5 | RNVC: 9

13 Jul 1999

4730-14-382-8738
Tube To Boss Straight Adapter

143828738
PE60829H14: RNCC: 3 | RNVC: 2

26 Jul 2000

4730-14-525-6287
Tube To Boss Straight Adapter

145256287
20 236 911 0240: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-473-2044
Tube Fitting Socket Welded Ferrule

144732044
P109457: RNCC: 3 | RNVC: 2
89473593: RNCC: 5 | RNVC: 2

7 Dec 1994

4730-14-455-1260
Fluid Passage Bolt

144551260
5810106143: RNCC: 3 | RNVC: 2

1 May 1992

4730-14-527-1701
Bulkhead Hose Connector

145271701
08530120: RNCC: 3 | RNVC: 2
8034972F00: RNCC: 5 | RNVC: 2

10 Oct 2001

4730-14-494-5797
Tube To Boss Straight Adapter

144945797
800 820 165: RNCC: 3 | RNVC: 2
F300 0T 017 5049: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-372-3050
Threaded Tube Fitting Plug

143723050
9125140058: RNCC: 3 | RNVC: 2
VDP7582: RNCC: 5 | RNVC: 2
A241458: RNCC: 5 | RNVC: 9

1 Sep 1981

4730-14-382-8749
Tube To Boss Straight Adapter

143828749
PE60835H15: RNCC: 3 | RNVC: 2

26 Jul 2000

4730-14-312-8987
Lubrication Fitting

143128987
0268107160: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-422-1004
Pipe Flange

144221004
73304-03114: RNCC: 3 | RNVC: 2

23 Feb 1988

4730-14-408-5304
Fluid Passage Bolt

144085304
9418250058: RNCC: 3 | RNVC: 2
9418-25-00-58: RNCC: 5 | RNVC: 2

2 Apr 1986

4730-14-360-1386
Tube Coupling

143601386
46-1682: RNCC: 3 | RNVC: 2
31640REP66: RNCC: 5 | RNVC: 2

31 Oct 1979

4730-14-211-5776
Embase Pour Raccord

142115776
NO PRIMARY REF14-211-5776: RNCC: 3 | RNVC: 2
25632: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-501-2386
Tube To Boss Straight Adapter

145012386
471-387: RNCC: 3 | RNVC: 2
471.387: RNCC: 3 | RNVC: 2
F300 0T 025 2791: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-387-0497
Hose To Boss Straight Adapter

143870497
RBF03211: RNCC: 3 | RNVC: 2
AF151-06: RNCC: 3 | RNVC: 2
AF15106: RNCC: 5 | RNVC: 2
8201504: RNCC: 5 | RNVC: 9

24 Aug 1983

4730-14-499-2037
Tube To Boss Straight Adapter

144992037
25212149-120: RNCC: 3 | RNVC: 2
103243006002A: RNCC: 3 | RNVC: 9
F300 0T 019 7673: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-482-1956
Fluid Flow Restrictor

144821956
REDN-LN320-038-DN32: RNCC: 3 | RNVC: 2
RAB9320: RNCC: 5 | RNVC: 2
23REDN-LN320-038-DN32: RNCC: 5 | RNVC: 2
LN320-038-DN32: RNCC: 5 | RNVC: 2

26 Jun 1996

4730-14-452-7512
Quick Disconnect Coupling Half

144527512
RBE08-6808-OS: RNCC: 3 | RNVC: 2
91637030: RNCC: 5 | RNVC: 2

15 Jan 1992

4730-14-501-2198
Tube To Boss Straight Adapter

145012198
423-311: RNCC: 3 | RNVC: 2
423.311: RNCC: 3 | RNVC: 2
F300 0T 025 2603: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-300-5406
Fluid Pressure Line Multiple Connector

143005406
606-10-90AFJ: RNCC: 3 | RNVC: 2
9567145191: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-326-1901

4730-14-365-9462

4730-14-578-4842
Hose To Boss Straight Adapter

145784842
00 152 06 06: RNCC: 3 | RNVC: 2

3 Dec 2013

4730-14-245-7159

4730-14-367-7763

4730-14-307-0420
Tube To Boss Straight Adapter

143070420
NO PRIMARY REF14-307-0420: RNCC: 3 | RNVC: 2
5145271000: RNCC: 5 | RNVC: 2
452710: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-215-4069
Fluid Pressure Line Multiple Connector

142154069
4038: RNCC: 3 | RNVC: 2
062710431: RNCC: 5 | RNVC: 9
710431: RNCC: 5 | RNVC: 9
64692: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-260-9249
Pipe Flange

142609249
7062DB1F1F108XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-304-7139

4730-14-243-3570
Raccord Special

142433570
15107BAB: RNCC: 3 | RNVC: 2
409746: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-365-9421

4730-14-365-9600

4730-14-423-6880
Tube Tee

144236880
TID19523: RNCC: 3 | RNVC: 2

27 Apr 1988

4730-14-285-2866
Quick Disconnect Coupling Half

142852866
2-00164: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-402-4168
Raccord Auto-Obtura

144024168
4-16-410: RNCC: 3 | RNVC: 2

3 Jul 1985

4730-14-243-5775
Bouchon

142435775
92130: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-529-4215
Fluid Pressure Line Multiple Connector

145294215
6501TSH404: RNCC: 3 | RNVC: 2

29 Mar 2002

4730-14-519-9631
Tube Coupling

145199631
RAC541060018: RNCC: 3 | RNVC: 2

28 Apr 2000

4730-14-405-5838
Quick Disconnect Coupling Half

144055838
M4Z6184905520: RNCC: 3 | RNVC: 2

4 Dec 1985

4730-14-565-3050
Hydraulic Manifold Assembly

145653050
MDS81R410: RNCC: 3 | RNVC: 2

5 Aug 2010

4730-14-440-6134
Tube To Boss Straight Adapter

144406134
20711007: RNCC: 3 | RNVC: 2

18 Jul 1990

4730-14-543-8831
Tube To Boss Straight Adapter

145438831
560614035: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-543-5776
Sediment Strainer Element

145435776
015 313 12: RNCC: 3 | RNVC: 2

23 Nov 2004

4730-14-525-0217
Quick Disconnect Coupling Half

145250217
SBE1829: RNCC: 3 | RNVC: 2

15 May 2001

4730-14-444-8681
Tube To Boss Straight Adapter

144448681
SO2146: RNCC: 3 | RNVC: 2
91711572: RNCC: 5 | RNVC: 2

23 Jan 1991

4730-14-427-8514
Element Raccord

144278514
AS34TQ103FREP3B: RNCC: 3 | RNVC: 2

17 Nov 1988

4730-14-289-9524
Vis Raccord

142899524
02096000600: RNCC: 3 | RNVC: 2
020960006: RNCC: 5 | RNVC: 2
411638: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-411-5441
Bride

144115441
0A2806: RNCC: 3 | RNVC: 2

20 Aug 1986

4730-14-443-9527
Pipe Fitting Assortment

144439527
K102070H: RNCC: 3 | RNVC: 2

17 Dec 1990

4730-14-425-9929
Flange To Tube Straight Adapter

144259929
160H712801-35: RNCC: 3 | RNVC: 2

28 Jul 1988

4730-14-280-8573

4730-14-262-1478

4730-14-272-8289
Bouchon Symetrique

142728289
NO PRIMARY REF14-272-8289: RNCC: 3 | RNVC: 2
683-40X45: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-479-4926
Hose Coupling Assembly

144794926
RBE 08.2806/IC/DKB/FB/VD/OD: RNCC: 3 | RNVC: 2
RBE8-2806DKB-ODICVDFB: RNCC: 5 | RNVC: 9

17 Jan 1996

4730-14-463-0769
Bulkhead Hose Connector

144630769
MAT425-0365F6: RNCC: 3 | RNVC: 2

18 May 1993

4730-14-393-4016
Quick Disconnect Coupling Half

143934016
N006-227-83: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-423-3931
Pipe Flange

144233931
UA50088006PN20-12C2DN25: RNCC: 2 | RNVC: 2
4730HBPN20DN02512C2: RNCC: 5 | RNVC: 2

16 Apr 1988

4730-14-529-1480
Quick Disconnect Coupling Assembly

145291480
MCR02-3904: RNCC: 3 | RNVC: 2

13 Mar 2002

4730-14-442-4430
Special-Shaped Hose Clamp

144424430
A2/22465REP9: RNCC: 3 | RNVC: 2

16 Oct 1990

4730-14-400-8179
Fluid Pressure Line Multiple Connector

144008179
9N06-06HTA: RNCC: 3 | RNVC: 2
9560143110: RNCC: 5 | RNVC: 2

21 May 1985

4730-14-230-4339
Tube Tee

142304339
1TDM12X17C012-12X17C0NN: RNCC: 3 | RNVC: 2
0946710072: RNCC: 5 | RNVC: 2
0946710072: RNCC: 5 | RNVC: 9
946710072: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-250-5715
Fluid Passage Bolt

142505715
L44312-8UZ40: RNCC: 2 | RNVC: 2
80118: RNCC: 3 | RNVC: 2
21348-16-19: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-449-7830
Steam Trap Parts Kit

144497830
TD42ADISQUE+CREPINEABDN1/2": RNCC: 3 | RNVC: 2

10 Sep 1991

4730-14-463-0767
Pipe Flange

144630767
MAT214-0642: RNCC: 3 | RNVC: 2

18 May 1993

4730-14-561-7166
Flange To Hose Straight Adapter

145617166
H1243610-101200: RNCC: 3 | RNVC: 2

25 Aug 2009

4730-14-290-9828

4730-14-346-6804

4730-14-332-0393
Essai Reser Raccord

143320393
NO PRIMARY REF14-332-0393: RNCC: 3 | RNVC: 2
27465: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-370-8874
Raccord Auto-Obtura

143708874
6801R75-3393-00: RNCC: 3 | RNVC: 2
6801366A75-3393-00: RNCC: 5 | RNVC: 2

21 Feb 1996

4730-14-411-1883
Support Collecteur

144111883
332A75-2222-01: RNCC: 3 | RNVC: 2

6 Aug 1986

4730-14-287-2763
Bride Filetee

142872763
341A34-1109-20: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-412-3316
Quick Disconnect Coupling Half

144123316
RBO06-1806/IA: RNCC: 3 | RNVC: 2
RB06-1806IA: RNCC: 5 | RNVC: 2

8 Oct 1986

4730-14-370-3842
Pipe Expansion Joint

143703842
307-224-100-25-110: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-367-7939

4730-14-463-5265
Tube Coupling

144635265
RM010: RNCC: 3 | RNVC: 2

17 Jun 1993

4730-14-365-9807

4730-14-500-1636
Tube To Boss Straight Adapter

145001636
1867032M1: RNCC: 3 | RNVC: 2
F300 0T 024 1650: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-457-7084
Tube Union

144577084
444901: RNCC: 3 | RNVC: 2
RAR1565: RNCC: 5 | RNVC: 2

16 Sep 1992

4730-14-432-6495
Quick Disconnect Coupling Half

144326495
1040-829: RNCC: 3 | RNVC: 2

19 Jun 1989

4730-14-405-1188
Tube To Boss Straight Adapter

144051188
8401302766: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-537-0436
Special-Shaped Hose Clamp

145370436
CFCD1 12 22 W1: RNCC: 3 | RNVC: 2

24 Sep 2003

4730-14-460-1734
Sediment Strainer Element

144601734
11423400: RNCC: 3 | RNVC: 2
RAR1619: RNCC: 5 | RNVC: 2

13 Jan 1993

4730-14-262-7635
Sediment Strainer Element

142627635
BTT592: RNCC: 3 | RNVC: 2
BTT592: RNCC: 5 | RNVC: 9
TKFBTT592: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-391-7699
Tube Tee

143917699
DA2C512423811: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-426-7803
Tube Tee

144267803
4730HEING088,9X5-48,3X2,6: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-356-8705
Sediment Strainer Element

143568705
1120TDN50: RNCC: 3 | RNVC: 2

15 May 1979

4730-14-521-9090
Quick Disconnect Coupling Half

145219090
IL0096012+IA0090912: RNCC: 3 | RNVC: 2
SYB1193: RNCC: 5 | RNVC: 2

25 Sep 2000

4730-14-545-2519
Non-Metallic Connecting Sleeve

145452519
S215A30A1001: RNCC: 1 | RNVC: 2
150866-1: RNCC: 3 | RNVC: 2

29 Mar 2005

4730-14-408-4468
Tube Tee

144084468
4730AB4.1DN8NU: RNCC: 2 | RNVC: 2
LV300-NS08S: RNCC: 3 | RNVC: 2
89040800NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-267-6202
Tubulure Raccordeme

142676202
DLT014396: RNCC: 3 | RNVC: 2
DLT014396: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-570-6801
Pipe Nipple

145706801
D040 04B: RNCC: 3 | RNVC: 2
002649: RNCC: 5 | RNVC: 2

17 Jan 2012

4730-14-225-4717
Bouchon Special

142254717
PA151-5M641P18: RNCC: 3 | RNVC: 9

1 Jan 1966

4730-14-279-5586
Tube To Boss Straight Adapter

142795586
9952433A: RNCC: 3 | RNVC: 2
9952433: RNCC: 5 | RNVC: 2
9-95-24-33: RNCC: 5 | RNVC: 9
9-95-24-33A: RNCC: 5 | RNVC: 9
TAHM1136-8: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-224-2810

4730-14-224-3862

4730-14-577-2723
Quick Disconnect Coupling Half

145772723
HA1504200: RNCC: 3 | RNVC: 2
A07080310: RNCC: 5 | RNVC: 2

30 Aug 2013

4730-14-273-5220

4730-14-268-6336

4730-14-365-3094

4730-14-578-4596
Quick Disconnect Coupling Half

145784596
805-1/4-1/4PT: RNCC: 3 | RNVC: 2
Y00015360: RNCC: 5 | RNVC: 2
A05929309: RNCC: 5 | RNVC: 2

2 Dec 2013

4730-14-435-0834
Tube Tee

144350834
853-700-155-0: RNCC: 3 | RNVC: 2

18 Oct 1989

4730-14-408-5935
Raccord Code 3

144085935
RBE5-2806FB: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-560-1980
Tube Outlet

145601980
332A72-1404-20: RNCC: 3 | RNVC: 2

1 Apr 2009

4730-14-575-9991
Tube Union

145759991
090-01-414: RNCC: 3 | RNVC: 2

22 May 2013

4730-14-300-7491
Fluid Pressure Line Multiple Connector

143007491
411MA0295F25: RNCC: 3 | RNVC: 2
411MA295F25: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-494-7463
Fluid Passage Bolt

144947463
17A12-18X150: RNCC: 3 | RNVC: 2
F300 0T 017 8660: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-296-1112

4730-14-334-2493
Tube Tee

143342493
GSM163-015F23: RNCC: 3 | RNVC: 2
GSM163-15F23: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-286-1778
Union Simple

142861778
Q1-52-20-21X27C0: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-559-1193
Quick Disconnect Coupling Half

145591193
N00324780: RNCC: 3 | RNVC: 2

9 Dec 2008

4730-14-497-2716
Quick Disconnect Coupling Half

144972716
3907-8: RNCC: 3 | RNVC: 2
F300 0T 022 9248: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-479-4086
Fluid Pressure Line Multiple Connector

144794086
731.B.12: RNCC: 3 | RNVC: 2
P431B12: RNCC: 3 | RNVC: 2
164844: RNCC: 5 | RNVC: 2
731 B 12: RNCC: 5 | RNVC: 2
731B12: RNCC: 5 | RNVC: 2
74731B12: RNCC: 5 | RNVC: 2
74731B12: RNCC: 5 | RNVC: 2

10 Jan 1996

4730-14-040-3860
Flexible Tube Coupling Assembly

140403860
E12.F.3: RNCC: 3 | RNVC: 2
E12F3: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-409-1062
Tube To Boss Straight Adapter

144091062
GE6PLREDA3K: RNCC: 3 | RNVC: 2
428925: RNCC: 5 | RNVC: 2

16 Apr 1986

4730-14-568-9618
Swivel Flange To Tube Elbow

145689618
CSET1815: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-262-3059
Raccord

142623059
A73207: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-529-3706
Tube-Pipe Fitting Kit

145293706
567104: RNCC: 3 | RNVC: 2

26 Mar 2002

4730-14-515-1721
Quick Disconnect Coupling Half

145151721
A95000013: RNCC: 3 | RNVC: 2

9 Jul 1999

4730-14-273-5425
Pipe Flange

142735425
7062TD1F1F216-7UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-395-3067
Tube Tee

143953067
TF188MFB: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-376-3545
Pipe Flange

143763545
065-30-9013PL7AREP2: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-396-4000
Tube Tee

143964000
TA14NU: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-252-1723
Tube Fitting Brazing Ferrule

142521723
17482: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-322-0813

4730-14-365-9514

4730-14-340-8730

4730-14-402-1897
Quick Disconnect Coupling Half

144021897
H8-62W: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-242-7979
Tube Tee

142427979
NG40901-4APL57N0M1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-284-3972
Pipe Flange

142843972
NO PRIMARY REF14-284-3972: RNCC: 3 | RNVC: 2
182H307: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-360-6637
Lubrication Fitting

143606637
NO PRIMARY REF14-360-6637: RNCC: 3 | RNVC: 2
710126: RNCC: 5 | RNVC: 2
710126: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-265-1587
Pipe Flange

142651587
NO PRIMARY REF14-265-1587: RNCC: 3 | RNVC: 2
96701: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-397-7048
Tube To Boss Straight Adapter

143977048
GSM514-001F61: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-206-7896
Air Hose Connector

142067896
NO PRIMARY REF14-206-7896: RNCC: 3 | RNVC: 2
933: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-577-5974
Tube Cap

145775974
12245: RNCC: 3 | RNVC: 2

26 Sep 2013

4730-14-557-7031
Hose Coupling

145577031
I643012: RNCC: 3 | RNVC: 2

4 Jul 2008

4730-14-339-1487

4730-14-557-8791
Tube Elbow

145578791
EW14SOMDCF: RNCC: 3 | RNVC: 2
A231004000024: RNCC: 5 | RNVC: 2

24 Jul 2008

4730-14-355-1899

4730-14-253-3109

4730-14-575-4622
Bulkhead Hose Connector

145754622
508614: RNCC: 3 | RNVC: 2

9 Apr 2013

4730-14-222-3985

4730-14-321-2138
Raccord Equipe

143212138
E8775: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-570-0073
Hose Coupling

145700073
355A52303700: RNCC: 3 | RNVC: 2
355A52-3037-00: RNCC: 5 | RNVC: 2

9 Nov 2011

4730-14-242-1064
Tube Union

142421064
EN10242-U2-1 1/4-FE-A: RNCC: 2 | RNVC: 2
770331107: RNCC: 3 | RNVC: 2
331-1 1-4: RNCC: 5 | RNVC: 2
770 331 107: RNCC: 5 | RNVC: 2
E29801U2G: RNCC: 5 | RNVC: 9
253-1 1-4: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-229-2165
Raccord Droit Speci

142292165
274084: RNCC: 3 | RNVC: 2
274084: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-529-0246
Quick Disconnect Coupling Half

145290246
RBE03-6806IC: RNCC: 3 | RNVC: 2

5 Mar 2002

4730-14-398-9064
Tube To Gas Fitting Straight Adapter

143989064
4A14L12-17C0NU: RNCC: 3 | RNVC: 2
0024248724: RNCC: 5 | RNVC: 2

6 Mar 1985

4730-14-379-4267
Tube To Boss Straight Adapter

143794267
12-16-22X150NU: RNCC: 3 | RNVC: 2
UMA16X22-150NNU: RNCC: 3 | RNVC: 2
4A16-22X150NU: RNCC: 3 | RNVC: 2
204104310NU: RNCC: 5 | RNVC: 2
EMDAS05318: RNCC: 5 | RNVC: 2
0024248517: RNCC: 5 | RNVC: 2
5005130197: RNCC: 5 | RNVC: 2

1 Oct 1982

4730-14-426-3325
Diaphragme

144263325
24048010800: RNCC: 3 | RNVC: 2
240480108: RNCC: 5 | RNVC: 9
446611: RNCC: 5 | RNVC: 9

23 Aug 1988

4730-14-253-3895

4730-14-363-2084

4730-14-499-7909
Union

144997909
31650-5: RNCC: 3 | RNVC: 2
31650.5: RNCC: 3 | RNVC: 2
F300 0T 023 7814: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-365-9855

4730-14-337-4647

4730-14-526-8293
Tube To Boss Straight Adapter

145268293
5010465374: RNCC: 3 | RNVC: 2

7 Sep 2001

4730-14-308-6779

4730-14-378-6587

4730-14-271-6683
Raccord Orientable

142716683
6041174: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-564-1551
Flared Tube Fitting Conical Seal

145641551
CY 15590015: RNCC: 3 | RNVC: 2

12 Apr 2010

4730-14-458-0882
Union Pour Tube

4730-14-341-1490
Fluid Passage Bolt

143411490
12100252: RNCC: 3 | RNVC: 2
N7907290252: RNCC: 5 | RNVC: 2
12010: RNCC: 5 | RNVC: 9
12100252: RNCC: 5 | RNVC: 9

16 Mar 1977

4730-14-403-0723
Tube Coupling

144030723
8814726649: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-362-2673
Tube To Boss Straight Adapter

143622673
114134: RNCC: 3 | RNVC: 2

30 Oct 2001

4730-14-357-5780
Fluid Pressure Line Multiple Connector

143575780
0000302510: RNCC: 3 | RNVC: 2

7 Jun 1979

4730-14-295-3219
Fluid Passage Bolt

142953219
3029000: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-205-0555
Tube Tee

142050555
R6X4LX6: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-436-4967
Bulkhead Hose Connector

144364967
RBE11-2103OD9VDFB: RNCC: 3 | RNVC: 2
91606966: RNCC: 5 | RNVC: 2

3 Jan 1990

4730-14-246-8900

4730-14-273-5384

4730-14-416-8149
Self-Sealing Coupling Assembly

144168149
1-85-600: RNCC: 3 | RNVC: 2

25 Jun 1987

4730-14-498-3053
Tube To Boss Straight Adapter

144983053
91952489: RNCC: 3 | RNVC: 2
PAA58-42-003-01: RNCC: 3 | RNVC: 2
20584200301: RNCC: 3 | RNVC: 2
F300 0T 004 7680: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-567-5986
Packing Nut

145675986
NCROUSOB4532260: RNCC: 3 | RNVC: 2

29 Mar 2011

4730-14-295-0285
Diaphragme Special

142950285
AS34TQ109BREP4: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-228-0134
Embout De Tube Spec

142280134
0043050020: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-400-1099
Entr Eau Collecteur

144001099
7400269077: RNCC: 3 | RNVC: 2
1336-23: RNCC: 3 | RNVC: 2
600622: RNCC: 5 | RNVC: 2
7400269077: RNCC: 5 | RNVC: 2
7400269482: RNCC: 5 | RNVC: 2
7910246317: RNCC: 5 | RNVC: 2

24 Apr 1985

4730-14-328-0072

4730-14-367-7835

4730-14-365-9210

4730-14-444-3091
Fluid Pressure Line Multiple Connector

144443091
2203310: RNCC: 3 | RNVC: 2

4 Jan 1991

4730-14-491-1343
Fluid Passage Bolt

144911343
2131270: RNCC: 3 | RNVC: 2
F300 0T 001 5415: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-397-9423
Bulkhead Hose Connector

143979423
PPA6NU: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-335-7640
Tube Tee

143357640
R081012: RNCC: 3 | RNVC: 2
R8X10X12: RNCC: 5 | RNVC: 2

30 Jun 1976

4730-14-268-7227
Fluid Passage Bolt

142687227
R13216: RNCC: 3 | RNVC: 2
RA13216: RNCC: 5 | RNVC: 2
91313476: RNCC: 5 | RNVC: 2
99058272: RNCC: 5 | RNVC: 2
91313476: RNCC: 5 | RNVC: 2
99058272: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-230-6037
Tube To Boss Straight Adapter

142306037
110529: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-445-1736
Tube Tee

144451736
544017: RNCC: 3 | RNVC: 2

4 Feb 1991

4730-14-538-2221
Tube Coupling

145382221
NGM0010032981795: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-343-6183
Fluid Pressure Line Multiple Connector

143436183
0000300450: RNCC: 3 | RNVC: 2

16 Jun 1977

4730-14-366-9433
Tube To Boss Straight Adapter

143669433
2128: RNCC: 3 | RNVC: 2

11 Dec 1980

4730-14-428-6469
Tube Coupling Inverted Nut

144286469
S3974: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-041-2608
Tube Coupling

140412608
K4: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-408-3873
Tube To Boss Straight Adapter

144083873
LV154-NS3820S: RNCC: 3 | RNVC: 2
84540463NU: RNCC: 5 | RNVC: 2

19 Mar 1986

4730-14-505-0287
Tube Tee

145050287
98401901: RNCC: 3 | RNVC: 2
5005430266: RNCC: 5 | RNVC: 2

11 Mar 1998

4730-14-505-6960
Return Tube Bend

145056960
A49835: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-499-2730
Quick-Disconnect Nipple

144992730
2787013: RNCC: 3 | RNVC: 2
Y00003997: RNCC: 3 | RNVC: 2
130227: RNCC: 5 | RNVC: 2
Y00003997: RNCC: 5 | RNVC: 9
F300 0T 020 6020: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-436-8795
Tube Coupling

144368795
RSM37947F18REP45: RNCC: 3 | RNVC: 2

8 Jan 1990

4730-14-283-5468
Tube To Boss Straight Adapter

142835468
272340: RNCC: 3 | RNVC: 2
272340: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-497-2007
Quick-Disconnect Nipple

144972007
69142010: RNCC: 3 | RNVC: 2
F300 0T 022 8177: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-349-0164
Fluid Pressure Line Multiple Connector

143490164
R13010Z64: RNCC: 3 | RNVC: 2
RA13010Z64: RNCC: 5 | RNVC: 2

19 Apr 1978

4730-14-554-5929
Branched Tubing Connector

145545929
0000366180: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-536-2580
Threaded Tube Fitting Plug

145362580
065.06394.000: RNCC: 3 | RNVC: 2

22 Jul 2003

4730-14-418-0844
Flange To Hose Elbow

144180844
004721990H: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-325-9066
Pipe Flange

143259066
AS34TV106REP17: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-536-3551
Pipe-Tube Escutcheon

145363551
008804: RNCC: 3 | RNVC: 2

29 Jul 2003

4730-14-439-0947
Pressure Plug Retention Cap

144390947
0243151610: RNCC: 3 | RNVC: 2

25 Apr 1990

4730-14-450-6638
Bulkhead Hose Connector

144506638
624229: RNCC: 3 | RNVC: 2

16 Oct 1991

4730-14-384-4218
Self-Sealing Coupling Half

143844218
WA 06201 00: RNCC: 3 | RNVC: 2
WA0621400: RNCC: 5 | RNVC: 2

4 May 1983

4730-14-434-4449
Fluid Pressure Line Multiple Connector

144344449
420585: RNCC: 3 | RNVC: 2
420585: RNCC: 5 | RNVC: 2
420585: RNCC: 5 | RNVC: 9

20 Sep 1989

4730-14-506-8498
Hose To Boss Straight Adapter

145068498
A50535: RNCC: 3 | RNVC: 2

27 May 1998

4730-14-204-4038

4730-14-336-4604

4730-14-363-1587
Sediment Strainer Body

143631587
556139: RNCC: 3 | RNVC: 2
556139-00: RNCC: 5 | RNVC: 2
SOG556139: RNCC: 5 | RNVC: 9

3 Apr 1980

4730-14-262-5174
Bulkhead Hose Connector

142625174
R8604: RNCC: 3 | RNVC: 2
84420-04: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-339-9692
Tube Tee

143399692
GSM163-004BF6: RNCC: 3 | RNVC: 2
GSM163-04BF6: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-429-5792
Tube To Boss Straight Adapter

144295792
4A6-12X150: RNCC: 3 | RNVC: 2
5005030055: RNCC: 5 | RNVC: 2
204105098: RNCC: 5 | RNVC: 2

1 Feb 1989

4730-14-256-8826
Lubrication Fitting

142568826
9202132: RNCC: 3 | RNVC: 2
G23-10X150: RNCC: 3 | RNVC: 2
G25-10-150: RNCC: 3 | RNVC: 2
G75-10-150: RNCC: 3 | RNVC: 2
RAR1347: RNCC: 5 | RNVC: 2
M4ZS450D2325: RNCC: 5 | RNVC: 2
9202032: RNCC: 5 | RNVC: 9
48800057: RNCC: 5 | RNVC: 9

21 Oct 1981

4730-14-365-7648
Tube To Boss Straight Adapter

143657648
9UMF12-10X100NU: RNCC: 3 | RNVC: 2

8 Oct 1980

4730-14-381-2434
Tube-Hose Fitting Compression Sleeve

143812434
F0532S4710X0002-1210: RNCC: 3 | RNVC: 2
S4710X0002-1210: RNCC: 3 | RNVC: 2
MAF0001005062: RNCC: 6 | RNVC: 9

25 Jan 1983

4730-14-519-6804
Quick Disconnect Plug

145196804
RBE03-8500/IC/SP+R69000117: RNCC: 3 | RNVC: 2

29 Mar 2000

4730-14-286-4970
Tube To Boss Straight Adapter

142864970
341A53-1002-22: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-377-2433
Bulkhead Hose Connector

143772433
366A55-1031-20: RNCC: 3 | RNVC: 2

17 May 1982

4730-14-257-1215
Embout De Raccordem

142571215
330A52-0400-20: RNCC: 3 | RNVC: 2
330A52-0400-2000: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-324-4955
Tube To Boss Straight Adapter

143244955
A60-71325: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-348-7684
Tube To Boss Straight Adapter

143487684
831-63-900A: RNCC: 3 | RNVC: 2
831-63-900A: RNCC: 5 | RNVC: 9
831-63-900A: RNCC: 5 | RNVC: 9
831-63-900C: RNCC: 5 | RNVC: 9
85-695-0237: RNCC: 6 | RNVC: 9

19 Apr 1978

4730-14-339-9767
Tube To Boss Straight Adapter

143399767
GSM171-001F10: RNCC: 3 | RNVC: 2
GSM171-01F10: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-374-3316
Sediment Strainer Element

143743316
286786: RNCC: 3 | RNVC: 2
85-691-6359: RNCC: 6 | RNVC: 9

8 Dec 1981

4730-14-565-5381
Hose Clamp

145655381
002197: RNCC: 3 | RNVC: 2

31 Aug 2010

4730-14-267-1970

4730-14-332-1701

4730-14-349-6810

4730-14-458-0911
Tube Elbow

144580911
W38S: RNCC: 3 | RNVC: 2

7 Oct 1992

4730-14-520-2160
Tube To Boss Straight Adapter

145202160
221918-1: RNCC: 3 | RNVC: 2

17 May 2000

4730-14-261-8520
Pipe Flange

142618520
RUHB12-6: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-367-7180

4730-14-339-8325

4730-14-242-2138

4730-14-466-5414
Tube To Boss Straight Adapter

144665414
40-6-4A5-51: RNCC: 3 | RNVC: 2
89165045: RNCC: 5 | RNVC: 2

15 Nov 1993

4730-14-561-3859
Hose Clamp

145613859
IBA845: RNCC: 3 | RNVC: 2
IBA845: RNCC: 5 | RNVC: 2

9 Jul 2009

4730-14-550-2193
Return Tube Bend

145502193
1627: RNCC: 3 | RNVC: 9

12 Jun 2006

4730-14-266-2630

4730-14-557-9580
Hose Clamp

145579580
202326005390: RNCC: 3 | RNVC: 2

8 Aug 2008

4730-14-283-9303
Fluid Passage Bolt

142839303
0000280380: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-449-7297
Pipe Elbow Assembly

144497297
721B932: RNCC: 3 | RNVC: 2
89232747: RNCC: 5 | RNVC: 2

4 Sep 1991

4730-14-294-4048
Quick Disconnect Coupling Half

142944048
405679: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-488-5936
Tube Coupling Assembly

144885936
3601S80B: RNCC: 3 | RNVC: 2
3601S80B: RNCC: 5 | RNVC: 2

21 May 1997

4730-14-490-3577
Tube To Boss Straight Adapter

144903577
700363113004: RNCC: 3 | RNVC: 2

24 Sep 1997

4730-14-499-2586
Tube Tee

144992586
10DS12NU: RNCC: 3 | RNVC: 2
A07050349: RNCC: 5 | RNVC: 2
10DS12NU: RNCC: 5 | RNVC: 9
A07050349: RNCC: 5 | RNVC: 9
F300 0T 020 4936: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-548-0325
Tube To Boss Straight Adapter

145480325
01050510: RNCC: 3 | RNVC: 2
1050510: RNCC: 5 | RNVC: 2

7 Dec 2005

4730-14-409-6313
Bulkhead Hose Connector

144096313
DA1D203535831: RNCC: 3 | RNVC: 2

28 May 1986

4730-14-311-3192
Pipe Flange

143113192
0604579100: RNCC: 3 | RNVC: 2
0604579100: RNCC: 3 | RNVC: 2
0604579100: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-507-0542
Tube Tee

145070542
PE66772TE120612: RNCC: 3 | RNVC: 2

8 Jun 1998

4730-14-556-5840
Special Nipple

145565840
332A32-3305-21BOM1: RNCC: 3 | RNVC: 2

26 Mar 2008

4730-14-352-5083
Fluid Pressure Line Multiple Connector

143525083
0000302620: RNCC: 3 | RNVC: 2

16 Oct 1978

4730-14-349-7278
Fluid Pressure Line Multiple Connector

143497278
0000301310: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-406-2041
Fluid Pressure Line Multiple Connector

144062041
BAZ5246: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-453-3968
Sediment Strainer Element

144533968
160-40T7-5X37MMNI: RNCC: 3 | RNVC: 2

19 Feb 1992

4730-14-509-6543
Fluid Flow Restrictor

145096543
RP1B521303095: RNCC: 3 | RNVC: 2

28 Oct 1998

4730-14-463-9467
Fluid Flow Restrictor

144639467
34313: RNCC: 3 | RNVC: 2
95672REP3: RNCC: 5 | RNVC: 2

7 Jul 1993

4730-14-313-4850
Sediment Strainer Element

143134850
401MA0401REP13: RNCC: 3 | RNVC: 2
401MA401REP13: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-426-2865
Tube To Boss Straight Adapter

144262865
5630571: RNCC: 3 | RNVC: 2
FOE5630571: RNCC: 5 | RNVC: 9

18 Aug 1988

4730-14-389-5848
Lubrication Fitting

143895848
A99016: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-523-1068
Quick Disconnect Coupling Half

145231068
IB6NH10: RNCC: 3 | RNVC: 2
IB6NH10: RNCC: 5 | RNVC: 2

4 Jan 2001

4730-14-549-3033
Quick Disconnect Coupling Half

145493033
QA 29011 00: RNCC: 3 | RNVC: 2

21 Mar 2006

4730-14-527-3844
Tube To Boss Straight Adapter

145273844
H145322: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-213-4232
Fluid Pressure Line Multiple Connector

142134232
56058Z: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-356-2209
Fluid Pressure Line Multiple Connector

143562209
70301052: RNCC: 3 | RNVC: 2
70301052: RNCC: 5 | RNVC: 1
70301052: RNCC: 5 | RNVC: 9

25 Apr 1979

4730-14-262-4310
Fluid Pressure Line Multiple Connector

142624310
398145: RNCC: 3 | RNVC: 2
398145: RNCC: 5 | RNVC: 2
398145: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-329-2209
Fluid Pressure Line Multiple Connector

143292209
F10A740011: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-522-7281
Tube To Boss Straight Adapter

145227281
EGE10LRED71: RNCC: 3 | RNVC: 2

15 Nov 2000

4730-14-527-3724
Tube To Boss Straight Adapter

145273724
H102874U: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-273-5284
Pipe Flange

142735284
7062SD1F1M30UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-552-3835
Pipe Flange

145523835
43043092: RNCC: 3 | RNVC: 2
43043092: RNCC: 3 | RNVC: 9

18 Dec 2006

4730-14-229-2168
Raccort Droit Speci

142292168
278791: RNCC: 3 | RNVC: 2
278791: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-260-9352

4730-14-204-3678
Tube Coupling

142043678
3751S8A: RNCC: 3 | RNVC: 2
956-71-3000-0: RNCC: 5 | RNVC: 2
9567130000: RNCC: 5 | RNVC: 2
3751S8A: RNCC: 5 | RNVC: 9

1 Jan 1963

4730-14-331-3565
Dispositif Graissag

143313565
GR00: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-390-1762

4730-14-362-3344

4730-14-545-4160
Tube To Boss Straight Adapter

145454160
EDKO12SZB: RNCC: 3 | RNVC: 2

12 Apr 2005

4730-14-325-6804
Tube Tee

143256804
0000365190: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-397-9420
Bulkhead Hose Connector

143979420
PPA20NU: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-323-9225
Pipe Flange

143239225
000MA858F11: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-541-2729
Check Valve Adapter

145412729
GLZ1455020P13: RNCC: 3 | RNVC: 2

26 May 2004

4730-14-546-8391
Tube Coupling

145468391
F8UNPMB12M16: RNCC: 3 | RNVC: 9

27 Aug 2005

4730-14-219-1691
Tube To Boss Straight Adapter

142191691
328009: RNCC: 3 | RNVC: 2
1545: RNCC: 5 | RNVC: 2
8092551: RNCC: 5 | RNVC: 2
918011260: RNCC: 5 | RNVC: 2
DBA328009: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-552-9599
Fluid Passage Bolt

145529599
712455: RNCC: 3 | RNVC: 2

19 Feb 2007

4730-14-364-6680
Pipe Flange

143646680
043-05-43-001A: RNCC: 3 | RNVC: 2

2 Sep 1980

4730-14-539-1676
Pipe Flange

145391676
LN320058-DN50-BRIDE ISO PN16: RNCC: 3 | RNVC: 2
23REDN/LN320/058-DN50-ISO PN16: RNCC: 5 | RNVC: 2
LN320058-DN50-BRIDEPLEINEISOPN16: RNCC: 5 | RNVC: 2
REDN/LN320/058.F4.DN50: RNCC: 5 | RNVC: 2
SYQ4432: RNCC: 5 | RNVC: 2

9 Dec 2003

4730-14-426-3141
Quick-Disconnect Nipple

144263141
SH8-63BSPP: RNCC: 3 | RNVC: 2
SH8-63BSPP: RNCC: 3 | RNVC: 9

23 Aug 1988

4730-14-438-8090
Return Tube Bend

144388090
993648: RNCC: 3 | RNVC: 2
SOG993648: RNCC: 5 | RNVC: 9
85-694-1594: RNCC: 6 | RNVC: 9

9 Apr 1990

4730-14-374-1165
Bulkhead Hose Connector

143741165
WTXWLNS10: RNCC: 3 | RNVC: 2
4730-AA-1087418: RNCC: 6 | RNVC: 9

8 Dec 1981

4730-14-467-5977
Fluid Pressure Line Multiple Connector

144675977
312-16725-001: RNCC: 3 | RNVC: 2

19 Jan 1994

4730-14-400-7098
Flange To Tube Straight Adapter

144007098
J05085-04-0600P008: RNCC: 3 | RNVC: 2

8 May 1985

4730-14-508-1030
Tube Tee

145081030
JBA11-5X16: RNCC: 3 | RNVC: 2
A05050312: RNCC: 5 | RNVC: 9

26 Aug 1998

4730-14-305-1565

4730-14-367-7849

4730-14-319-6532

4730-14-441-5695
Tube Union

144415695
1901590: RNCC: 3 | RNVC: 2
1901590: RNCC: 5 | RNVC: 2

4 Sep 1990

4730-14-393-1754
Self-Sealing Coupling Half

143931754
NO PRIMARY REF14-393-1754: RNCC: 3 | RNVC: 2
9-329-2757-224: RNCC: 5 | RNVC: 9

12 Apr 1984

4730-14-316-9576

4730-14-332-3788
Fluid Passage Bolt

143323788
613-415-003-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-284-5773
Noix

142845773
86416: RNCC: 3 | RNVC: 2
9567158150: RNCC: 5 | RNVC: 2
86416: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-223-7541
Embout De Raccord

142237541
384716: RNCC: 3 | RNVC: 2
062057727: RNCC: 5 | RNVC: 9
57727: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-508-8062
Tube To Boss Straight Adapter

145088062
3.54148.0: RNCC: 3 | RNVC: 2
3-54148-0: RNCC: 5 | RNVC: 9

30 Sep 1998

4730-14-285-1866
Tube To Boss Straight Adapter

142851866
A6075-1: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-405-4423
Tube Coupling

144054423
CB2A14 3/8: RNCC: 3 | RNVC: 9

27 Nov 1985

4730-14-500-8333
Tube To Boss Straight Adapter

145008333
F4BPB06-1-4: RNCC: 3 | RNVC: 2
F300 0T 024 8535: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-403-0346
Tube Tee

144030346
S4BXS14-1-2: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-375-5217
Tube To Boss Straight Adapter

143755217
8-8F4OMXS: RNCC: 3 | RNVC: 2
F40XS12 1-2: RNCC: 5 | RNVC: 2
AS62228/1: RNCC: 5 | RNVC: 2
F40XS12-1-2: RNCC: 5 | RNVC: 9

26 Feb 1982

4730-14-408-6443
Fixation Support

144086443
160G732010-31: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-423-4524
Pipe Flange

144234524
UA50088006PN100-11D1SDN25: RNCC: 2 | RNVC: 2
4730HCPN100DN02511D1S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-269-1806

4730-14-287-5122

4730-14-578-0976
Flange To Tube Straight Adapter

145780976
0292720620: RNCC: 3 | RNVC: 2

30 Oct 2013

4730-14-391-7585
Adaptation Raccord

143917585
480902: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-576-4383
Tube Tee

145764383
ASNA3757E161610: RNCC: 1 | RNVC: 2
ASNA3757E161610: RNCC: 3 | RNVC: 2

19 Jun 2013

4730-14-408-9599
Raccord A Braser

144089599
854-100-049-0: RNCC: 3 | RNVC: 2

9 Apr 1986

4730-14-426-7968
Tube Tee

144267968
4730HEING219,1X8-114,3X5,6: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-426-7452
Tube Tee

144267452
4730HEING033,7X2,3-10,2X1,6: RNCC: 2 | RNVC: 2

20 Sep 1988

4730-14-450-5467
Tube To Boss Straight Adapter

144505467
F4BXS10-1/2: RNCC: 3 | RNVC: 2
F4BXS10-1-2: RNCC: 5 | RNVC: 2
91713709: RNCC: 5 | RNVC: 2

9 Oct 1991

4730-14-412-3325
Quick Disconnect Coupling Half

144123325
RBE11-1153/IC/3: RNCC: 3 | RNVC: 2
RBE11-1153IC3: RNCC: 5 | RNVC: 2

8 Oct 1986

4730-14-287-0657
Quick Disconnect Coupling Half

142870657
RBE06-1100: RNCC: 3 | RNVC: 2
RBE6-1100: RNCC: 5 | RNVC: 2
20-2: RNCC: 5 | RNVC: 2
85-618-8270: RNCC: 6 | RNVC: 9

1 Jan 1972

4730-14-333-5248
Barillet A 6 Voies

143335248
GSM163-023F11: RNCC: 3 | RNVC: 2
GSM163-23F11: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-238-9859
Fluid Passage Bolt

142389859
NO PRIMARY REF14-238-9859: RNCC: 3 | RNVC: 2
SD5020-9: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-551-9707
Fluid Passage Bolt

145519707
MAT211-0026F15: RNCC: 3 | RNVC: 2

14 Nov 2006

4730-14-287-9727

4730-14-494-5843
Graisseur

144945843
800 820 220: RNCC: 3 | RNVC: 2
F300 0T 017 5099: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-474-1527
Tuyere

144741527
10000D30493-5: RNCC: 3 | RNVC: 2

31 Jan 1995

4730-14-293-4416

4730-14-563-4411
Quick Disconnect Coupling Half

145634411
QA 29022 00: RNCC: 3 | RNVC: 2
QA2902200: RNCC: 5 | RNVC: 2

9 Feb 2010

4730-14-558-9655
Tube Coupling

145589655
20417: RNCC: 3 | RNVC: 2

25 Nov 2008

4730-14-329-2547

4730-14-250-1995

4730-14-468-6791
Self-Sealing Coupling Assembly

144686791
A82083-1: RNCC: 3 | RNVC: 2

16 Mar 1994

4730-14-367-7878
Quick Disconnect Coupling Half

143677878
S2219CD12-9: RNCC: 3 | RNVC: 2
S2219CD: RNCC: 5 | RNVC: 2

19 Jan 1981

4730-14-224-9838

4730-14-423-3925
Pipe Flange

144233925
E29203-01A-PN16DN200Z3CND18-12: RNCC: 2 | RNVC: 2
E29203-01A-PN16DN200Z2CND17-12: RNCC: 5 | RNVC: 2
4730JEDN200: RNCC: 5 | RNVC: 2

16 Apr 1988

4730-14-445-8276
Pipe Flange

144458276
721-810-108: RNCC: 3 | RNVC: 2

27 Feb 1991

4730-14-390-8914
Threaded Tube Fitting Plug

143908914
ST159-2M27P24: RNCC: 3 | RNVC: 2
J05087-027-1000P024: RNCC: 5 | RNVC: 2

1 Mar 1984

4730-14-276-7076
Tube To Boss Straight Adapter

142767076
3C40-20: RNCC: 3 | RNVC: 2
R020: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-470-6584
Tube Tee

144706584
350A54-1111-00: RNCC: 3 | RNVC: 2

29 Jun 1994

4730-14-467-2878
Tube To Boss Straight Adapter

144672878
Q1-5GE-38S-1"1/2BSPK: RNCC: 3 | RNVC: 2

3 Jan 1994

4730-14-334-2668
Sediment Strainer Element

143342668
GSM476-016F7: RNCC: 3 | RNVC: 2
GSM476-16F7: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-346-5929
Quick Disconnect Coupling Half

143465929
RBE06-7150: RNCC: 3 | RNVC: 2
RBE6-7150: RNCC: 5 | RNVC: 2

12 Dec 1977

4730-14-372-8060
Bulkhead Hose Connector

143728060
K99-006: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-385-2241
Tube To Boss Straight Adapter

143852241
C571-12-12: RNCC: 3 | RNVC: 2
9571-12-12: RNCC: 5 | RNVC: 2

26 Jul 1983

4730-14-543-3621
Reducing Tube Coupling Nut

145433621
2004/20 EATSEA/BVM: RNCC: 3 | RNVC: 2

22 Oct 2004

4730-14-299-6926
Fluid Pressure Line Multiple Connector

142996926
L44-311-10UZ40: RNCC: 2 | RNVC: 2
80448: RNCC: 3 | RNVC: 2
80448: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-470-9203
Lubrication Fitting

144709203
NO PRIMARY REF14-470-9203: RNCC: 3 | RNVC: 2
FLN4910759P7: RNCC: 5 | RNVC: 9

13 Jul 1994

4730-14-385-8456
Threaded Tube Fitting Plug

143858456
0685-02-80X90: RNCC: 3 | RNVC: 2
9685-02-80X90: RNCC: 5 | RNVC: 2

24 Aug 1983

4730-14-305-5874
Lubricant Pressure Relief Fitting

143055874
NO PRIMARY REF14-305-5874: RNCC: 3 | RNVC: 2
4000-191: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-345-6599
Bulkhead Hose Connector

143456599
SQ1-02-01: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-041-2525
Tube To Boss Straight Adapter

140412525
N410-85: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-462-2032
Hose To Boss Straight Adapter

144622032
MAT023-01-01: RNCC: 3 | RNVC: 2

15 Apr 1993

4730-14-478-5688
Tube Tee

144785688
P165D162525: RNCC: 3 | RNVC: 2
713.D.16.25.25: RNCC: 3 | RNVC: 2
713 D 16 25 25: RNCC: 5 | RNVC: 2
713D162525: RNCC: 5 | RNVC: 2
74713D162525: RNCC: 5 | RNVC: 2
713D16 25 25: RNCC: 5 | RNVC: 2
713D16-25-25: RNCC: 5 | RNVC: 2
74713D162525: RNCC: 5 | RNVC: 2

8 Nov 1995

4730-14-367-9749
Quick Disconnect Coupling Half

143679749
RBE03-6806-9: RNCC: 3 | RNVC: 2
RBE3-6806-9: RNCC: 5 | RNVC: 2
A1252213: RNCC: 5 | RNVC: 2
85-691-3484: RNCC: 6 | RNVC: 9

19 Jan 1981

4730-14-382-7877
Tube To Boss Straight Adapter

143827877
42-6-5-10C0: RNCC: 3 | RNVC: 2
DLT023741: RNCC: 5 | RNVC: 2

17 Feb 1983

4730-14-469-3235
Tube Tee

144693235
BN329512TERED33,7-26,9-2,77: RNCC: 3 | RNVC: 2

20 Apr 1994

4730-14-430-7141
Fluid Pressure Line Multiple Connector

144307141
PM1A723115500: RNCC: 3 | RNVC: 2
PM1A723115500: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-461-3837
Tube Tee

144613837
EVL6PLA3K: RNCC: 3 | RNVC: 2
EVL6PLA3K: RNCC: 3 | RNVC: 9
427370: RNCC: 5 | RNVC: 2

10 Mar 1993

4730-14-356-0355

4730-14-340-3590

4730-14-561-4290
Tube Coupling

145614290
353-949-21443: RNCC: 3 | RNVC: 2
I214434: RNCC: 5 | RNVC: 2

16 Jul 2009

4730-14-519-4133
Bulkhead Hose Connector

145194133
332A52-1366-20: RNCC: 3 | RNVC: 2

15 Mar 2000

4730-14-388-5131
Quick Disconnect Coupling Assembly Set

143885131
HL 05021 00-HD 05121 00: RNCC: 3 | RNVC: 2
HL5021-00HL5121: RNCC: 5 | RNVC: 2

3 Nov 1983

4730-14-365-8196

4730-14-380-4560

4730-14-568-1065
Tube Union

145681065
NSA855111C6: RNCC: 1 | RNVC: 2
NSA855111C6: RNCC: 3 | RNVC: 2
NSA855111C6: RNCC: 3 | RNVC: 2
NSA855111C6: RNCC: 5 | RNVC: 9

9 May 2011

4730-14-559-4057
Self-Sealing Coupling Half

145594057
9201 25 13: RNCC: 3 | RNVC: 2

7 Jan 2009

4730-14-365-9768

4730-14-256-0547
Raccord Vabco

142560547
UMB10-1-4BUA9NFEM: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-320-3681
Quick Disconnect Coupling Half

143203681
RBE6-1101-3VD: RNCC: 3 | RNVC: 2
2123B: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-398-5921
Tube Fitting Brazing Ferrule

143985921
4730AMF2PN250DE36: RNCC: 2 | RNVC: 2
GSM164-062F8Z0NEB: RNCC: 3 | RNVC: 2
MAT164-0352F8ZONEB: RNCC: 3 | RNVC: 2

31 Jan 1985

Load More Results