What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 116 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 116 of 185

4730-14-458-8011
Hose To Grooved Clamp Coupling Straight Adapter

144588011
07-155-16-10: RNCC: 3 | RNVC: 2
RAR1601: RNCC: 5 | RNVC: 2

4 Nov 1992

4730-14-367-7741

4730-14-202-6536

4730-14-270-0118

4730-14-528-9139
Tube Coupling

145289139
232600B: RNCC: 3 | RNVC: 2

22 Feb 2002

4730-14-457-5616
Fluid Pressure Line Multiple Connector

144575616
22226300: RNCC: 3 | RNVC: 9
5000788884: RNCC: 5 | RNVC: 2

10 Sep 1992

4730-14-443-9551
Pipe Fitting Assortment

144439551
K102890: RNCC: 3 | RNVC: 2
1004893C00: RNCC: 5 | RNVC: 2
K102890: RNCC: 6 | RNVC: 9

17 Dec 1990

4730-14-366-6922
Tube To Boss Straight Adapter

143666922
9413364901: RNCC: 3 | RNVC: 2

20 Nov 1980

4730-14-434-6581
Pipe Flange

144346581
1056-DN 200: RNCC: 3 | RNVC: 9

27 Sep 1989

4730-14-533-9637
Air Hose Connector

145339637
840877: RNCC: 3 | RNVC: 2

5 Mar 2003

4730-14-434-5818
Air Hose Connector

144345818
2192: RNCC: 3 | RNVC: 2
133798H: RNCC: 5 | RNVC: 2
375108: RNCC: 5 | RNVC: 2

25 Sep 1989

4730-14-267-8789
Pipeline Flexible Connection

142678789
505938: RNCC: 3 | RNVC: 9

1 Jan 1970

4730-14-233-8332
Quick Disconnect Wye

142338332
201436: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-458-8564
Tube To Boss Straight Adapter

144588564
27578: RNCC: 3 | RNVC: 2

5 Nov 1992

4730-14-440-4212
Bulkhead Hose Connector

144404212
DA2C521001002U1: RNCC: 3 | RNVC: 2

11 Jul 1990

4730-14-531-8037
Quick Disconnect Coupling Half

145318037
31210613: RNCC: 3 | RNVC: 2

18 Sep 2002

4730-14-353-0171
Tube Tee

143530171
R7810F: RNCC: 3 | RNVC: 2

14 Nov 1978

4730-14-444-5174
Hose To Boss Straight Adapter

144445174
123060312: RNCC: 3 | RNVC: 9

14 Jan 1991

4730-14-571-6413
Flange To Tube Elbow

145716413
M2821342100000: RNCC: 3 | RNVC: 2

17 Apr 2012

4730-14-498-7568
Tube To Boss Straight Adapter

144987568
3235335488: RNCC: 3 | RNVC: 2
CS25S0: RNCC: 5 | RNVC: 2
ZF939007: RNCC: 5 | RNVC: 9
F300 0T 008 3559: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-530-8145
Tube To Boss Straight Adapter

145308145
01011680: RNCC: 3 | RNVC: 2

8 Jul 2002

4730-14-438-7998
Hose Coupling Assembly

144387998
DA2C729001250: RNCC: 3 | RNVC: 2

4 Apr 1990

4730-14-427-5228
Lubrication Fitting

144275228
NO PRIMARY REF14-427-5228: RNCC: 3 | RNVC: 2
9020045025: RNCC: 5 | RNVC: 9

20 Oct 1988

4730-14-533-6350
Tube To Boss Straight Adapter

145336350
H102372: RNCC: 3 | RNVC: 2

12 Feb 2003

4730-14-483-0949
Fluid Passage Bolt

144830949
1661628M1: RNCC: 3 | RNVC: 2
1661628M1: RNCC: 5 | RNVC: 2

8 Aug 1996

4730-14-553-4798
Flange To Boss Elbow

145534798
0000371270: RNCC: 3 | RNVC: 2

5 Apr 2007

4730-14-327-8312

4730-14-226-8786

4730-14-365-9350

4730-14-557-8810
Tube Reducer

145578810
GR12-10LCFX: RNCC: 3 | RNVC: 2
A231004000138: RNCC: 5 | RNVC: 2

25 Jul 2008

4730-14-472-0341
Raccord Flexible

144720341
MAT166-3006VERSIONB: RNCC: 3 | RNVC: 2

5 Oct 1994

4730-14-410-2679
Pipe Flange

144102679
29003541: RNCC: 3 | RNVC: 2

18 Jun 1986

4730-14-235-6232
Sediment Strainer Element

142356232
5813: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-408-4494
Tube To Boss Straight Adapter

144084494
LW114-NC3012S: RNCC: 3 | RNVC: 2
8401302747NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-325-8389
Tube Tee

143258389
R7610M: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-226-8816
Tube To Boss Straight Adapter

142268816
GSM1322DN48TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-545-2119
Flange To Hose Straight Adapter

145452119
PW3230: RNCC: 3 | RNVC: 2
6KK113: RNCC: 5 | RNVC: 2

24 Mar 2005

4730-14-546-4752
Tube To Boss Straight Adapter

145464752
105122092: RNCC: 3 | RNVC: 2
5005030256: RNCC: 3 | RNVC: 2

6 Jul 2005

4730-14-202-6262

4730-14-443-2105
Fluid Pressure Line Multiple Connector

144432105
1202010: RNCC: 3 | RNVC: 2

12 Nov 1990

4730-14-295-7720
Tube To Boss Straight Adapter

142957720
901MA0062REP3: RNCC: 3 | RNVC: 2
901MA062REP3: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-509-3320
Sediment Strainer Element

145093320
T632A20T0505: RNCC: 1 | RNVC: 2
CE0801503774H00: RNCC: 3 | RNVC: 2
7052A3632121: RNCC: 5 | RNVC: 2

28 Oct 1998

4730-14-482-8040
Tube To Boss Straight Adapter

144828040
0709182: RNCC: 3 | RNVC: 2
709182: RNCC: 5 | RNVC: 2

25 Jul 1996

4730-14-383-7216
Fluid Pressure Line Multiple Connector

143837216
26190400: RNCC: 3 | RNVC: 9

11 Apr 1983

4730-14-371-6731
Quick Disconnect Coupling Assembly

143716731
AR.16M: RNCC: 3 | RNVC: 2
AR16MAL: RNCC: 5 | RNVC: 2

5 Aug 1981

4730-14-543-2002
Pipe Fitting Assortment

145432002
ACC00204: RNCC: 3 | RNVC: 2
530076: RNCC: 5 | RNVC: 2
AA001609: RNCC: 6 | RNVC: 9

31 Aug 2004

4730-14-442-6296
Fluid Pressure Line Multiple Connector

144426296
TB3050403: RNCC: 3 | RNVC: 2
70823: RNCC: 5 | RNVC: 9

23 Oct 1990

4730-14-516-1193
Quick Disconnect Coupling Assembly

145161193
Y9801271: RNCC: 3 | RNVC: 2

10 Sep 1999

4730-14-497-9964
Tube To Boss Straight Adapter

144979964
001260: RNCC: 3 | RNVC: 9
001260: RNCC: 5 | RNVC: 2
F300 0T 001 4804: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-290-2013
Tube Tee

142902013
0264308310: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-350-2719
Lubrication Fitting

143502719
9200439: RNCC: 3 | RNVC: 9

14 Jun 1978

4730-14-400-2463
Tube To Boss Straight Adapter

144002463
0000252570: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-503-8902
Tube Tee

145038902
130CU20: RNCC: 3 | RNVC: 2

4 Feb 1998

4730-14-299-8486
Tube To Boss Straight Adapter

142998486
4730AJUNI0NMALERBSM14X125CA10: RNCC: 2 | RNVC: 2
4CA10-14X125NU: RNCC: 3 | RNVC: 2
GSM164-014F10: RNCC: 3 | RNVC: 2
UMK10X14-125NNU: RNCC: 3 | RNVC: 2
Q1-52-10-14X125NU: RNCC: 3 | RNVC: 2
GSM164-14F10: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-432-4683
Pipe Flange

144324683
BN329-506C2DN50: RNCC: 3 | RNVC: 2

14 Jun 1989

4730-14-539-8285
Pipe Coupling Leak Repair Clamp

145398285
MC2002-73: RNCC: 3 | RNVC: 2

11 Feb 2004

4730-14-220-5478
Tube To Boss Straight Adapter

142205478
UFA12X12-17N: RNCC: 3 | RNVC: 2
UF12-17: RNCC: 3 | RNVC: 2
13-12-12-17: RNCC: 3 | RNVC: 2
6A12-12-17: RNCC: 3 | RNVC: 2
0946660012: RNCC: 5 | RNVC: 2
946660012: RNCC: 5 | RNVC: 9
0946660012: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-366-5918

4730-14-498-1261
Tube To Boss Straight Adapter

144981261
3070195: RNCC: 3 | RNVC: 2
3070195: RNCC: 3 | RNVC: 2
3070196: RNCC: 5 | RNVC: 9
F300 0T 003 7798: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-546-3246
Straight Tubing Connector

145463246
558398: RNCC: 3 | RNVC: 2

24 Jun 2005

4730-14-369-4412
Fluid Pressure Line Multiple Connector

143694412
NB6: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-295-3412
Tube Tee

142953412
R6X12LX12: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-360-6646
Tube Tee

143606646
TA14LL: RNCC: 3 | RNVC: 2

19 Dec 1979

4730-14-371-1625
Self-Sealing Coupling Assembly

143711625
16379532: RNCC: 3 | RNVC: 2
16379532: RNCC: 5 | RNVC: 9

5 Aug 1981

4730-14-543-8810
Tube To Boss Straight Adapter

145438810
560613114: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-518-5598
Return Tube Bend

145185598
5000747093: RNCC: 3 | RNVC: 2

9 Feb 2000

4730-14-494-5480
Tube To Boss Straight Adapter

144945480
642 559 30: RNCC: 3 | RNVC: 2
F300 0T 017 4657: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-331-6830
Fluid Passage Bolt

143316830
0000140601: RNCC: 3 | RNVC: 2
0000140601: RNCC: 5 | RNVC: 9
140601: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-351-4479
Tube To Boss Straight Adapter

143514479
1111427901: RNCC: 3 | RNVC: 2
DAH1111427901: RNCC: 5 | RNVC: 9

12 Sep 1978

4730-14-317-8072
Tube Coupling Assembly

143178072
3812R25A: RNCC: 3 | RNVC: 2
3812R25A: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-268-9754
Tube To Boss Straight Adapter

142689754
11220480Z: RNCC: 3 | RNVC: 2
22048: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-353-7754

4730-14-452-9303
Corps De Clapet

144529303
14041212M: RNCC: 3 | RNVC: 2

28 Jan 1992

4730-14-279-0522
Tube Tee

142790522
9150021466: RNCC: 3 | RNVC: 2
CAR7-14-10-10HP: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-325-4863
Pipe Flange

143254863
C11BA0101-033: RNCC: 3 | RNVC: 2
C11BA0101-033: RNCC: 5 | RNVC: 2
C11BA0101-033: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-427-8941
Tube To Boss Straight Adapter

144278941
GE14SREDA3CX: RNCC: 3 | RNVC: 2
GE14SREDA3CX: RNCC: 3 | RNVC: 9
XGE14-PSR-ED-A3C: RNCC: 5 | RNVC: 9

19 Nov 1988

4730-14-274-2432

4730-14-219-2424

4730-14-461-4099
Fluid Flow Restrictor

144614099
A87269: RNCC: 3 | RNVC: 2

10 Mar 1993

4730-14-543-8277
Tube To Boss Straight Adapter

145438277
9450136: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-270-8591
Swivel Retaining Pipe Flange

142708591
154303: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-231-0941

4730-14-367-7895

4730-14-327-0397

4730-14-493-3984
Quick Disconnect Coupling Half

144933984
GPL33-1840: RNCC: 3 | RNVC: 2
F300 0T 012 9103: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-306-7132
Pipe Flange

143067132
511-410-105CENSDREP1: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-338-5260

4730-14-325-3295

4730-14-330-8837

4730-14-556-7477
Pipe Nipple

145567477
8280 340: RNCC: 3 | RNVC: 2

8 Apr 2008

4730-14-555-7374
Fluid Passage Bolt

145557374
0235231040: RNCC: 3 | RNVC: 2

11 Dec 2007

4730-14-399-3320
Tube To Boss Straight Adapter

143993320
742PN10: RNCC: 3 | RNVC: 2
742 PN 10: RNCC: 5 | RNVC: 2
742PN10: RNCC: 5 | RNVC: 2
74742PN10: RNCC: 5 | RNVC: 2

6 Mar 1985

4730-14-537-0203
Tube Union

145370203
MJG NBR 100-2A W4: RNCC: 3 | RNVC: 2

24 Sep 2003

4730-14-398-1417
Equip Embou A Chape

143981417
355A57-2164-01: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-354-9312

4730-14-363-6702
Pipe Flange

143636702
H1078SP2PL7A: RNCC: 3 | RNVC: 2

6 Jul 1980

4730-14-478-5896
Fluid Pressure Line Multiple Connector

144785896
515076: RNCC: 3 | RNVC: 2

8 Nov 1995

4730-14-323-9212
Pipe Flange

143239212
7062TD1F1F108UE12: RNCC: 2 | RNVC: 2

1 Jan 1975

4730-14-464-4170
Tube To Boss Straight Adapter

144644170
23S10051: RNCC: 3 | RNVC: 2
23S10051: RNCC: 5 | RNVC: 2

28 Jul 1993

4730-14-487-5452
Bulkhead Hose Connector

144875452
RA1M521404180: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-515-3856
Tube To Boss Straight Adapter

145153856
6200106: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-434-7244
Tube Fitting Flared Sleeve

144347244
BN324595DN300AC: RNCC: 3 | RNVC: 2

3 Oct 1989

4730-14-563-7898
Tube Coupling Nut

145637898
4BMTXSS: RNCC: 3 | RNVC: 2

16 Mar 2010

4730-14-364-0510
Pipe Flange

143640510
365A75-2607-20: RNCC: 3 | RNVC: 2

7 Aug 1980

4730-14-275-6955
Arret Equerre

142756955
NO PRIMARY REF14-275-6955: RNCC: 3 | RNVC: 2
4112: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-571-4725
Bulkhead Hose Connector

145714725
7421297373: RNCC: 1 | RNVC: 2
7421297373: RNCC: 3 | RNVC: 2
21297373: RNCC: 5 | RNVC: 2

28 Mar 2012

4730-14-301-8120
Sediment Strainer Element

143018120
2019TADN32: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-409-8971
Self-Sealing Coupling Half

144098971
3632173: RNCC: 3 | RNVC: 2

4 Jun 1986

4730-14-547-6670
Tube Coupling

145476670
089210D: RNCC: 3 | RNVC: 2

25 Oct 2005

4730-14-540-5772
Tube To Boss Straight Adapter

145405772
09919113: RNCC: 3 | RNVC: 2

7 Apr 2004

4730-14-262-1706
Pipe Flange

142621706
7062DL1F1F66-5XC18: RNCC: 2 | RNVC: 2
MEC10312: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-547-8332
Fluid Pressure Line Multiple Connector

145478332
3437-08-06: RNCC: 3 | RNVC: 2
5010525687: RNCC: 5 | RNVC: 2

17 Nov 2005

4730-14-394-1003
Sediment Strainer Element

143941003
F01A63-022: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-391-6678
Quick Disconnect Coupling Half

143916678
BPXN003-271-76: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-206-4151
Tube Coupling

142064151
1P45515: RNCC: 3 | RNVC: 2
0010515: RNCC: 5 | RNVC: 2
FOE1P45515: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-040-4051
Tube Tee

140404051
R16X12X16: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-441-5978
Flange To Hose Elbow

144415978
D05427102: RNCC: 3 | RNVC: 2

5 Sep 1990

4730-14-435-1369
Tube-Hose Fitting Compression Sleeve

144351369
0124150040: RNCC: 3 | RNVC: 2

23 Oct 1989

4730-14-374-3994
Threaded Tube Fitting Plug

143743994
7755: RNCC: 3 | RNVC: 9

8 Dec 1981

4730-14-032-1680
Pipe Flange

140321680
CMT30E9002PL2B200: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-213-8936
Tube To Boss Straight Adapter

142138936
12111R: RNCC: 3 | RNVC: 2
12111R: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-226-9953
Raccord Special

142269953
0000280190: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-390-0052
Tube To Boss Straight Adapter

143900052
DHS613-513-48: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-379-3065
Pipe Flange

143793065
E64-35-3200-122BF9-22ETF10-22DN-: RNCC: 3 | RNVC: 1

6 Sep 1982

4730-14-222-6527
Tube Fitting Brazing Ferrule

142226527
GSM1297F1AF1BTABLEAU1D1-25I21: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-485-0679
Tube Coupling

144850679
332A39-1079-20: RNCC: 3 | RNVC: 2

19 Dec 1996

4730-14-218-2923
Pipe Flange

142182923
J22-220BP1PN6DN6: RNCC: 2 | RNVC: 2

1 Jan 1965

4730-14-455-1470
Flange To Boss Elbow

144551470
516094: RNCC: 3 | RNVC: 2
SOG516094: RNCC: 5 | RNVC: 9
85-694-7373: RNCC: 6 | RNVC: 9

1 May 1992

4730-14-334-2548
Tube Tee

143342548
GSM163-017F51: RNCC: 3 | RNVC: 2
GSM163-17F51: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-573-2584
Tube Fitting Socket Welded Ferrule

145732584
1CH99012: RNCC: 3 | RNVC: 2

26 Sep 2012

4730-14-461-7664
Tube To Boss Straight Adapter

144617664
0310746: RNCC: 3 | RNVC: 2

24 Mar 1993

4730-14-208-9652
Fluid Pressure Line Multiple Connector

142089652
410523: RNCC: 3 | RNVC: 2
410523: RNCC: 5 | RNVC: 2
410523: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-553-4808
Flange To Boss Elbow

145534808
0319710400: RNCC: 3 | RNVC: 2

5 Apr 2007

4730-14-267-3465
Pipe Flange

142673465
0206970120: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-454-2349
Fluid Pressure Line Multiple Connector

144542349
TB2030401: RNCC: 3 | RNVC: 2

26 Mar 1992

4730-14-552-6503
Quick Disconnect Wye

145526503
9440U08 21: RNCC: 3 | RNVC: 2

19 Jan 2007

4730-14-369-2730

4730-14-351-8077
Tube To Boss Straight Adapter

143518077
1051413: RNCC: 3 | RNVC: 2

12 Sep 1978

4730-14-446-4698
Tube Tee

144464698
0000366510: RNCC: 3 | RNVC: 2

20 Mar 1991

4730-14-552-1109
Straight Tubing Connector

145521109
0000380460: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-392-9391
Tube To Boss Straight Adapter

143929391
0024288771: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-537-0437
Special-Shaped Hose Clamp

145370437
CFCD1 12 25 W1: RNCC: 3 | RNVC: 2

24 Sep 2003

4730-14-270-4554
Tube Tee

142704554
DF1: RNCC: 3 | RNVC: 2
DF1: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-344-1028

4730-14-311-2575
Tube To Boss Straight Adapter

143112575
91013842: RNCC: 3 | RNVC: 2
A3-38-33-42CYL: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-205-0418

4730-14-557-0898
Tube Reducer

145570898
70179: RNCC: 3 | RNVC: 2

7 May 2008

4730-14-308-5952
Quick Disconnect Wye

143085952
2301524: RNCC: 3 | RNVC: 2
7470: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-335-1372
Pipeline Flexible Spacer

143351372
I131NTH65PN16: RNCC: 2 | RNVC: 2
DILNTH65PN16: RNCC: 3 | RNVC: 2
DILAT0FLEXNT65HHPN10: RNCC: 3 | RNVC: 9
DLT034098: RNCC: 5 | RNVC: 2
DILNTH65PN16: RNCC: 5 | RNVC: 9

3 Jun 1976

4730-14-548-7664
Tube Union

145487664
TRI 03 RVP: RNCC: 3 | RNVC: 2

8 Feb 2006

4730-14-450-4980
Tube Union

144504980
BLC236924: RNCC: 3 | RNVC: 2

9 Oct 1991

4730-14-217-2857
Buse

142172857
S2155: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-555-7375
Adapter And Flange Assembly

145557375
0292702380: RNCC: 3 | RNVC: 2

11 Dec 2007

4730-14-556-9557
Pipe Bushing

145569557
D055 02B: RNCC: 3 | RNVC: 2

23 Apr 2008

4730-14-554-0367
Quick Disconnect Coupling Half

145540367
372 243: RNCC: 3 | RNVC: 2
372 243: RNCC: 3 | RNVC: 2

7 Jun 2007

4730-14-508-0114
Tube Tee

145080114
130CU14X12X14: RNCC: 3 | RNVC: 9
1911060195: RNCC: 5 | RNVC: 9

26 Aug 1998

4730-14-480-5230
Lubrication Fitting

144805230
92 62 14: RNCC: 3 | RNVC: 2

14 Mar 1996

4730-14-310-5601
Tube To Boss Straight Adapter

143105601
223138: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-546-3707
Tube Tee

145463707
5010248981: RNCC: 3 | RNVC: 2

28 Jun 2005

4730-14-372-7963
Fluid Passage Bolt

143727963
52S1006102: RNCC: 3 | RNVC: 2
52S1006102: RNCC: 5 | RNVC: 2

21 Sep 1981

4730-14-429-9532
Tube Tee

144299532
210C00008: RNCC: 3 | RNVC: 2
10A8CDBI: RNCC: 5 | RNVC: 2

20 Feb 1989

4730-14-400-9107
Bulkhead Hose Connector

144009107
F522-19RS1: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-429-2616
Quick Disconnect Coupling Half

144292616
REB11-2103-0DIAHPJVFB: RNCC: 3 | RNVC: 2
RAC150110001: RNCC: 5 | RNVC: 2

11 Jan 1989

4730-14-320-3625
Fluid Pressure Line Multiple Connector

143203625
351-030-2140: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-424-5487
Tube To Boss Straight Adapter

144245487
LW164-CC1008N: RNCC: 3 | RNVC: 2
UFI10-15-21MANO: RNCC: 5 | RNVC: 2

27 May 1988

4730-14-215-1526
Raccord Special Equ

142151526
C25M25V: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-463-2029
Tube Tee

144632029
JBTXS32: RNCC: 3 | RNVC: 2
91741688: RNCC: 5 | RNVC: 9

26 May 1993

4730-14-518-5117
Tube To Boss Straight Adapter

145185117
HRAXX000047: RNCC: 3 | RNVC: 9

9 Feb 2000

4730-14-366-5880

4730-14-338-2527
Bronze Tube Coude

143382527
CSN127: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-272-2145

4730-14-392-3954
Siege De Filtre

143923954
401MA0580F2REPB: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-576-8386
Exhaust-Intake Pneumatic Muffler

145768386
C83404000000: RNCC: 3 | RNVC: 2

18 Jul 2013

4730-14-299-6250

4730-14-360-9450

4730-14-204-3936

4730-14-317-9915
Tournant Raccord

143179915
RT50-90JA: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-484-9961
Raccord Coude

144849961
U1778-N45-16-085: RNCC: 3 | RNVC: 2
N45-16-085: RNCC: 5 | RNVC: 2

19 Dec 1996

4730-14-571-7200
Pipe Flange

145717200
A88140259: RNCC: 3 | RNVC: 2

25 Apr 2012

4730-14-229-1008

4730-14-223-9985

4730-14-351-5113
Tube To Boss Straight Adapter

143515113
486350R: RNCC: 3 | RNVC: 2

12 Sep 1978

4730-14-434-7141
Adaptateur Bride

144347141
BN329515D2DN40AC: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-367-7320

4730-14-294-7408

4730-14-283-6226

4730-14-556-9474
Hose Tee

145569474
TD 12X12X12: RNCC: 3 | RNVC: 2

23 Apr 2008

4730-14-249-4286
Bouchon Filete Spec

142494286
R4A721-15-02: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-435-0862
Swivel Flange To Hose Connector

144350862
853-700-311-0: RNCC: 3 | RNVC: 2

18 Oct 1989

4730-14-297-6334

4730-14-429-2303
Tube To Boss Straight Adapter

144292303
85939: RNCC: 3 | RNVC: 2
85939: RNCC: 5 | RNVC: 2

11 Jan 1989

4730-14-340-5431
Self-Sealing Coupling Assembly

143405431
714E230: RNCC: 3 | RNVC: 2
15066478-714E: RNCC: 3 | RNVC: 2
96081455: RNCC: 5 | RNVC: 2
96092494: RNCC: 5 | RNVC: 2
714E230: RNCC: 5 | RNVC: 9

14 Feb 1977

4730-14-526-4676
Tube To Boss Straight Adapter

145264676
RA1M726200012: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-397-9408
Tube Tee

143979408
17-28TF: RNCC: 3 | RNVC: 2
10A28NE: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-468-6358
Bulkhead Hose Connector

144686358
522 000: RNCC: 3 | RNVC: 2
1085986D00: RNCC: 5 | RNVC: 2

14 Mar 1994

4730-14-470-2809
Sediment Strainer Element

144702809
BSNGCFF008F7B: RNCC: 3 | RNVC: 2

14 Jun 1994

4730-14-357-1189
Fluid Pressure Line Multiple Connector

143571189
107024003002: RNCC: 3 | RNVC: 2
107024003002: RNCC: 5 | RNVC: 2

7 Jun 1979

4730-14-411-2297
Fluid Passage Bolt

144112297
0172050060: RNCC: 3 | RNVC: 2

6 Aug 1986

4730-14-452-5643
Pipe Flange

144525643
LN320033DN250EXT273: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-508-0321
Return Tube Bend

145080321
0248235: RNCC: 3 | RNVC: 2

26 Aug 1998

4730-14-526-2440
Tube To Boss Straight Adapter

145262440
H118822: RNCC: 3 | RNVC: 2

11 Jul 2001

4730-14-263-1980
Raccord Droit

142631980
NO PRIMARY REF14-263-1980: RNCC: 3 | RNVC: 2
417968: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-461-0746
Quick Disconnect Coupling Half

144610746
WA06354-57: RNCC: 3 | RNVC: 2
WA0635457: RNCC: 5 | RNVC: 2

23 Feb 1993

4730-14-333-5312
Hydraulic System Accessories Manifold

143335312
81536201: RNCC: 3 | RNVC: 2
81-536-201: RNCC: 5 | RNVC: 9
81536-201: RNCC: 5 | RNVC: 9
81536201: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-402-7076

4730-14-263-7470
Tube Tee

142637470
T6: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-279-0532

4730-14-361-3725

4730-14-032-1562
Contre Bride

140321562
CMT30E9030AF3ET3BISDE30REP4: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-333-5138

4730-14-208-8035

4730-14-578-1951
Hose Nipple

145781951
50127064: RNCC: 3 | RNVC: 2
91585642: RNCC: 5 | RNVC: 2

12 Nov 2013

4730-14-262-1514

4730-14-278-8215

4730-14-401-0039
Contre-Bride

144010039
E64-35-3200-122F12-23ETF13-23DN-: RNCC: 3 | RNVC: 1

21 May 1985

4730-14-389-1811
Filtre Mano-Regulat

143891811
NO PRIMARY REF14-389-1811: RNCC: 3 | RNVC: 2
FML1-2D16: RNCC: 5 | RNVC: 2

29 Nov 1983

4730-14-398-5915
Tube Fitting Brazing Ferrule

143985915
4730AMF2PN100DE57: RNCC: 2 | RNVC: 2
MAT164-0352F11ZONEA: RNCC: 3 | RNVC: 2
GSM164-062F11Z0NEA: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-218-1123
Raccord Equipe

142181123
M3C781-13: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-285-3551
Tube To Boss Straight Adapter

142853551
91052527: RNCC: 3 | RNVC: 2
A2-25-21-27C0: RNCC: 5 | RNVC: 9
A2-25-21X27BSPC0: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-562-3764
Lubrication Fitting

145623764
D2-11-06: RNCC: 3 | RNVC: 2

20 Oct 2009

4730-14-508-5937
Hose Connector Sleeve

145085937
1028-12-15-01/H0001: RNCC: 3 | RNVC: 2
1028-12-15-01: RNCC: 5 | RNVC: 2

21 Sep 1998

4730-14-339-2617
Tube To Boss Straight Adapter

143392617
220115000: RNCC: 3 | RNVC: 2
220-115: RNCC: 5 | RNVC: 2
R220205-07: RNCC: 5 | RNVC: 2

18 Jan 1977

4730-14-357-6299
Bulkhead Hose Connector

143576299
0-300732S: RNCC: 3 | RNVC: 2
0-300732S: RNCC: 5 | RNVC: 9
85-689-6267: RNCC: 6 | RNVC: 9

27 Jun 1979

4730-14-290-7666

4730-14-334-9794

4730-14-418-8114
Raccord Bloc

144188114
DA1D721298: RNCC: 3 | RNVC: 2

16 Sep 1987

4730-14-295-4035
Bulkhead Hose Connector

142954035
121E77-100-73-0: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-429-5805
Bulkhead Hose Connector

144295805
3A10CL10NU: RNCC: 3 | RNVC: 2
0024248398: RNCC: 5 | RNVC: 2
2803131151: RNCC: 5 | RNVC: 2
5005030034: RNCC: 5 | RNVC: 2

1 Feb 1989

4730-14-373-2927
Self-Sealing Coupling Assembly

143732927
100-43678: RNCC: 3 | RNVC: 2

21 Oct 1981

4730-14-362-1079
Tube-Hose Fitting Compression Sleeve

143621079
U1113F15EM30: RNCC: 2 | RNVC: 2
4730AA-EMB30: RNCC: 5 | RNVC: 2

20 Feb 1980

4730-14-496-5326
Tube To Boss Straight Adapter

144965326
57503: RNCC: 3 | RNVC: 2
F300 0T 021 6377: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-555-9838
Pipe Flange

145559838
332R87-1068-02: RNCC: 3 | RNVC: 2

17 Jan 2008

4730-14-569-8435
Hose To Gas Fitting Straight Adapter

145698435
R1A25M1525-0410: RNCC: 3 | RNVC: 2

24 Oct 2011

4730-14-253-6167
Purgeur Special

142536167
E31666: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-364-7544
Raccord Dentree

143647544
CA051300: RNCC: 3 | RNVC: 2

2 Sep 1980

4730-14-341-7239

4730-14-576-2027
Threaded Tube Fitting Plug

145762027
290N12: RNCC: 3 | RNVC: 2

5 Jun 2013

4730-14-342-9645

4730-14-314-3941

4730-14-560-0809
Hose Nipple

145600809
1597: RNCC: 3 | RNVC: 2
67924: RNCC: 5 | RNVC: 2

20 Mar 2009

4730-14-263-1969
Tube To Boss Straight Adapter

142631969
NO PRIMARY REF14-263-1969: RNCC: 3 | RNVC: 2
417965: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-456-7544
Pipe Flange

144567544
A65108-20R1: RNCC: 3 | RNVC: 2

24 Jul 1992

4730-14-330-7979
Raccordement Bride

143307979
GSM162-007F12: RNCC: 3 | RNVC: 2
GSM162-07F12: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-346-6778

4730-14-304-0341

4730-14-575-3261
Hose Bushing

145753261
D065 06B: RNCC: 3 | RNVC: 2

27 Mar 2013

4730-14-575-7841
Flange To Tube Straight Adapter

145757841
M2821352900000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-529-9882
Tuyau Collier

4730-14-525-4492

4730-14-509-3526

4730-14-509-4989

4730-14-566-9528
Hose Elbow

145669528
3102 06 08: RNCC: 3 | RNVC: 2
A430400100169: RNCC: 5 | RNVC: 2
102AB018: RNCC: 5 | RNVC: 2

20 Jan 2011

4730-14-273-5360

4730-14-262-1539

4730-14-266-6339
Guide Raccord Auto-

142666339
A74216: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-278-5623

4730-14-300-0555

4730-14-477-8992
Tube Union

144778992
NO PRIMARY REF14-477-8992: RNCC: 3 | RNVC: 2
1800483: RNCC: 5 | RNVC: 2
METAL-GRIP 48.3NBR INOX INOX: RNCC: 5 | RNVC: 2

29 Sep 1995

4730-14-429-2274
Guidage Bague

144292274
P6213-15: RNCC: 3 | RNVC: 2

11 Jan 1989

4730-14-415-3644
Tube To Boss Straight Adapter

144153644
815920279966: RNCC: 3 | RNVC: 2

5 May 1987

4730-14-555-8212
Straight Tubing Connector

145558212
0301030130: RNCC: 3 | RNVC: 2

17 Dec 2007

4730-14-337-1745
Tube To Boss Straight Adapter

143371745
1714.528: RNCC: 3 | RNVC: 2
200259: RNCC: 5 | RNVC: 9

7 Oct 1976

4730-14-399-9261
Quick Disconnect Coupling Half

143999261
10.221.42: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-457-7880
Fluid Passage Bolt

144577880
99631304286: RNCC: 3 | RNVC: 2
DIN7643-LL28: RNCC: 5 | RNVC: 2

23 Sep 1992

4730-14-267-6191
Tube-Hose Fitting Compression Sleeve

142676191
4301STD: RNCC: 3 | RNVC: 9

1 Jan 1970

4730-14-543-7011
Lubrication Fitting

145437011
1000002054: RNCC: 3 | RNVC: 2

3 Dec 2004

4730-14-416-6548
Sediment Strainer Element

144166548
S85566: RNCC: 3 | RNVC: 2

24 Jun 1987

4730-14-307-3993
Pipe Expansion Joint

143073993
DLT046592: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-438-0534
Fluid Pressure Line Multiple Connector

144380534
82416700: RNCC: 3 | RNVC: 2
13A8SBERNU: RNCC: 5 | RNVC: 2
813131558: RNCC: 5 | RNVC: 2
5000785110: RNCC: 5 | RNVC: 2

7 Mar 1990

4730-14-503-2073
Tube Coupling

145032073
RP1A504250071: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-260-4229
Raccord Auto-Obtura

142604229
A60-24268: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-253-0773
Bouchon Special

142530773
T0P7G506: RNCC: 3 | RNVC: 2
60-0188: RNCC: 5 | RNVC: 2
TOP7G506: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-228-0239
Tube-Hose Fitting Compression Sleeve

142280239
R5106: RNCC: 3 | RNVC: 2
99057987: RNCC: 5 | RNVC: 2
91313992: RNCC: 5 | RNVC: 2
801157-00: RNCC: 5 | RNVC: 2
99057987: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-391-8950
Racco Equipe Clapet

143918950
432-020: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-304-9284
Grain De Raccord

143049284
NO PRIMARY REF14-304-9284: RNCC: 3 | RNVC: 2
B4C361468REP3: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-570-7357
Hose Coupling

145707357
8409717: RNCC: 3 | RNVC: 2

19 Jan 2012

4730-14-211-4941
Embout Pour Graisse

142114941
06504: RNCC: 3 | RNVC: 9
FL066504: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-562-1790
Fluid Passage Bolt

145621790
3528 00 13: RNCC: 3 | RNVC: 2
FS0002449: RNCC: 6 | RNVC: 9

6 Oct 2009

4730-14-367-7301

4730-14-344-5081

4730-14-202-6535

4730-14-371-2943
Tube-Hose Fitting Compression Sleeve

143712943
5000274726: RNCC: 3 | RNVC: 2
5000274726: RNCC: 5 | RNVC: 9

5 Aug 1981

4730-14-383-1382
Fluid Pressure Line Multiple Connector

143831382
S2719: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-447-6165
Fluid Pressure Line Multiple Connector

144476165
81540005: RNCC: 3 | RNVC: 2
81540005: RNCC: 5 | RNVC: 1
91719691: RNCC: 5 | RNVC: 2
5010067014: RNCC: 5 | RNVC: 2
81540005: RNCC: 5 | RNVC: 9

29 May 1991

4730-14-279-7225
Swivel Retaining Pipe Flange

142797225
48530: RNCC: 3 | RNVC: 2
48530: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-492-2823
Tube To Boss Straight Adapter

144922823
0024558032: RNCC: 3 | RNVC: 2
F300 0T 007 3054: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-501-0076
Tube Tee

145010076
10281165: RNCC: 3 | RNVC: 2
F300 0T 025 0371: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-217-3601

4730-14-347-8149

4730-14-491-0875
Tube To Boss Straight Adapter

144910875
NO PRIMARY REF14-491-0875: RNCC: 3 | RNVC: 2
1284-027: RNCC: 5 | RNVC: 9
F300 0T 001 3844: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-336-8074
Pipe Flange

143368074
NO PRIMARY REF14-336-8074: RNCC: 3 | RNVC: 2
13433460: RNCC: 5 | RNVC: 9

7 Oct 1976

4730-14-516-8448
Tube Tee

145168448
S4710X0002-1852: RNCC: 3 | RNVC: 2

20 Oct 1999

4730-14-464-9795
Tube Coupling

144649795
365A72-1606-00: RNCC: 3 | RNVC: 2

8 Sep 1993

4730-14-041-2457
Tube To Boss Straight Adapter

140412457
Q1-52-14-15X21C0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-406-7926
Tube To Boss Straight Adapter

144067926
GSM164-022F9: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-424-5519
Quick Disconnect Coupling Half

144245519
RCS08-1813: RNCC: 3 | RNVC: 2

27 May 1988

4730-14-405-0188
Fluid Pressure Line Multiple Connector

144050188
NO PRIMARY REF14-405-0188: RNCC: 3 | RNVC: 2
B20AB1020-037: RNCC: 5 | RNVC: 9
B20AB1020-037: RNCC: 5 | RNVC: 9

20 Nov 1985

4730-14-274-6978

4730-14-366-6052

4730-14-282-0914
Raccord Adapteur

142820914
BN314510: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-575-7707
Flange To Tube Straight Adapter

145757707
M2811343200000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-575-3337
Hose Coupling

145753337
D820 147: RNCC: 3 | RNVC: 2

27 Mar 2013

4730-14-448-5721
Te Pour Tube

4730-14-262-1627

4730-14-559-7570
Tube Tee

145597570
S8UNPMB12M22: RNCC: 3 | RNVC: 2
S8UNPMB12M22: RNCC: 5 | RNVC: 2
S8UNPMB12M22: RNCC: 5 | RNVC: 9

16 Feb 2009

4730-14-223-2988

4730-14-271-1558
Corps Raccord Auto-

142711558
A1-74215: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-371-5735

4730-14-563-0790
Quick Disconnect Coupling Assembly

145630790
R1049: RNCC: 3 | RNVC: 2

21 Dec 2009

4730-14-308-6430
Pipe Flange

143086430
0205177550: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-242-7968
Swivel Retaining Pipe Flange

142427968
7062CA1F1-98UA10: RNCC: 3 | RNVC: 9

1 Jan 1967

4730-14-566-6448
Tube To Boss Straight Adapter

145666448
GE18LM18X1,5CFX: RNCC: 3 | RNVC: 2
A231004000364: RNCC: 5 | RNVC: 2

2 Dec 2010

4730-14-260-9202

4730-14-564-1257
Tube Tee

145641257
82467809000: RNCC: 3 | RNVC: 2

9 Apr 2010

4730-14-295-2008

4730-14-564-5208
Tube Tee

145645208
8938507300: RNCC: 3 | RNVC: 2
A231004000086: RNCC: 5 | RNVC: 2

4 May 2010

4730-14-253-8393
Bouchon Pour Culass

142538393
NO PRIMARY REF14-253-8393: RNCC: 3 | RNVC: 2
18J50: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-566-3838
Tube Coupling Body

145663838
730010S600-03B: RNCC: 3 | RNVC: 2

9 Nov 2010

4730-14-283-5534
Raccord

142835534
32000132: RNCC: 3 | RNVC: 2
910-22C: RNCC: 3 | RNVC: 2
32000132: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-256-5092
Lubrication Fitting

142565092
5002M12: RNCC: 3 | RNVC: 2
ALG5002M12: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-458-3721
Pipe Flange

144583721
DLT049604: RNCC: 3 | RNVC: 2

21 Oct 1992

4730-14-253-3190

4730-14-404-9335
Tuy Rig Asp Crepine

144049335
UCIL1115: RNCC: 3 | RNVC: 9
U70722: RNCC: 5 | RNVC: 9

20 Nov 1985

4730-14-238-5579

4730-14-499-2122
Tube To Boss Straight Adapter

144992122
25212139-088: RNCC: 3 | RNVC: 2
103043X02032A: RNCC: 3 | RNVC: 9
F300 0T 019 7812: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-329-3339
Raccord Convergent

143293339
NO PRIMARY REF14-329-3339: RNCC: 3 | RNVC: 2
4162-38-02A: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-566-9975
Non-Metallic Connecting Sleeve

145669975
1501100400: RNCC: 3 | RNVC: 2

25 Jan 2011

4730-14-234-9255

4730-14-572-0870
Pipe To Tube Straight Adapter

145720870
PM1A775012513: RNCC: 3 | RNVC: 2
PM1A775012513: RNCC: 5 | RNVC: 2

6 Jun 2012

4730-14-453-3830
Union Pour Tube

4730-14-459-7029

4730-14-408-5467
Fond

144085467
157764: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-326-6513
Tube Coupling

143266513
U1114F13-14: RNCC: 2 | RNVC: 2
91505012: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-352-5972
Tube Fitting Brazing Ferrule

143525972
330A87-1368-20: RNCC: 3 | RNVC: 2

16 Oct 1978

4730-14-398-1093
Coude Equipe

143981093
NO PRIMARY REF14-398-1093: RNCC: 3 | RNVC: 2
A12BQ0060-039: RNCC: 5 | RNVC: 9

31 Jan 1985

4730-14-578-7251
Tube Tee

145787251
ASNA3752-100604: RNCC: 1 | RNVC: 2
PE20103-100604: RNCC: 3 | RNVC: 2

2 Jan 2014

4730-14-450-4051
Quick Disconnect Coupling Half

144504051
RBE06-1153: RNCC: 3 | RNVC: 2
7025: RNCC: 3 | RNVC: 2
RBE6-1153: RNCC: 5 | RNVC: 2
7025: RNCC: 5 | RNVC: 2

4 Oct 1991

4730-14-500-6918
Tube To Boss Straight Adapter

145006918
XGE12LRA3C: RNCC: 3 | RNVC: 2
XGE12-LRA3C: RNCC: 3 | RNVC: 2
F300 0T 024 7109: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-550-6841
Tube Tee

145506841
730010S600-11B: RNCC: 3 | RNVC: 2

6 Jul 2006

4730-14-397-6444
Pipeline Flexible Spacer

143976444
I131NTH400MAR: RNCC: 3 | RNVC: 2
DILNTH400MAR: RNCC: 3 | RNVC: 9

14 Dec 1984

4730-14-222-3825

4730-14-567-7587
Flange To Tube Straight Adapter

145677587
M2122130900000: RNCC: 3 | RNVC: 2

11 Apr 2011

4730-14-543-8023
Tube To Boss Straight Adapter

145438023
9321427: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-409-6312
Bulkhead Hose Connector

144096312
DA1D203535830: RNCC: 3 | RNVC: 2

28 May 1986

4730-14-545-6740
Tube Coupling

145456740
0137552007: RNCC: 3 | RNVC: 2
91830746: RNCC: 5 | RNVC: 2

27 Apr 2005

4730-14-278-1759
Tube To Boss Straight Adapter

142781759
12-25-1BGS: RNCC: 3 | RNVC: 2
4A25-1BGS: RNCC: 3 | RNVC: 2
M25-16B: RNCC: 3 | RNVC: 2
UMA25X1BGSN: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-385-9872
Tube To Boss Straight Adapter

143859872
4A14L15-21C0NU: RNCC: 3 | RNVC: 2
0024248725: RNCC: 5 | RNVC: 2
0024248725: RNCC: 5 | RNVC: 9

24 Aug 1983

4730-14-259-7278
Raccord Orientable

142597278
ES109-55TF: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-273-5233

4730-14-433-2230

4730-14-434-9334

4730-14-408-4488
Tube To Boss Straight Adapter

144084488
LW114-NC0604S: RNCC: 3 | RNVC: 2
8901061347NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-404-0276
Sediment Strainer Element

144040276
0074880400: RNCC: 3 | RNVC: 2

11 Sep 1985

4730-14-521-8334
Fluid Passage Bolt

145218334
SIPMAA1000600A: RNCC: 3 | RNVC: 2

19 Sep 2000

4730-14-208-9018

4730-14-556-7377
Hose Tee

145567377
8130 1610: RNCC: 3 | RNVC: 2

8 Apr 2008

4730-14-394-6269

4730-14-273-5343
Pipe Flange

142735343
7062TC1F1F25UA9NFEM: RNCC: 2 | RNVC: 2
4730CE-25F: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-257-4834
Tube To Boss Straight Adapter

142574834
UML16X20-150N: RNCC: 3 | RNVC: 2
ML16-20X1-5: RNCC: 3 | RNVC: 2
416-20X150: RNCC: 3 | RNVC: 2
52-16-20X150: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-557-9862
Multi-Con Screw Cap

145579862
3329 00 03: RNCC: 3 | RNVC: 2

13 Aug 2008

4730-14-250-6236

4730-14-492-2775
Union

144922775
0024248323: RNCC: 3 | RNVC: 2
F300 0T 007 2895: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-306-7763

4730-14-305-9804

4730-14-251-2690
Bloc De Jonction

142512690
116410: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-411-5446
Coude

144115446
520621: RNCC: 3 | RNVC: 2

20 Aug 1986

4730-14-338-9726

4730-14-311-5837

4730-14-291-5961

4730-14-430-6436
Raccord Boitier

144306436
PM1A534100010: RNCC: 3 | RNVC: 2
PM1A534100010: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-207-6130
Pipe Flange

142076130
P3768: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-438-8187
Tube To Boss Straight Adapter

144388187
DLT589056: RNCC: 3 | RNVC: 2
RAR1447: RNCC: 5 | RNVC: 2

9 Apr 1990

4730-14-450-1033
Tube To Boss Straight Adapter

144501033
1805 16 21: RNCC: 3 | RNVC: 2
18051621: RNCC: 5 | RNVC: 2

24 Sep 1991

4730-14-424-6610
Quick Disconnect Coupling Half

144246610
5000261514: RNCC: 3 | RNVC: 2
89409922: RNCC: 5 | RNVC: 2

2 Jun 1988

4730-14-546-2213
Tube To Boss Straight Adapter

145462213
RAC662060001: RNCC: 3 | RNVC: 2

15 Jun 2005

4730-14-390-5007
Quick Disconnect Coupling Half

143905007
3250043: RNCC: 3 | RNVC: 9

26 Jan 1984

4730-14-438-5203
Hose Coupling Assembly

144385203
DA2C729003631: RNCC: 3 | RNVC: 2

21 Mar 1990

4730-14-427-4307
Tube To Gas Fitting Straight Adapter

144274307
361093: RNCC: 3 | RNVC: 2
AS10040000B59UO: RNCC: 5 | RNVC: 2

19 Oct 1988

4730-14-504-7340
Tube To Boss Straight Adapter

145047340
5005330174: RNCC: 3 | RNVC: 2

2 Mar 1998

4730-14-518-1441
Tube To Boss Straight Adapter

145181441
5000946893: RNCC: 3 | RNVC: 2

26 Jan 2000

4730-14-326-7458
Quick Disconnect Coupling Half

143267458
E29573CAN11CUIVREALLIE: RNCC: 2 | RNVC: 2

2 Jul 1975

4730-14-543-9761
Tube To Boss Straight Adapter

145439761
4773124900: RNCC: 3 | RNVC: 9

19 Dec 2004

4730-14-334-5783

4730-14-232-5361

4730-14-575-9384
Pipe Nipple

145759384
NO PRIMARY REF 14-575-9384: RNCC: 3 | RNVC: 2
003R027X: RNCC: 5 | RNVC: 2

16 May 2013

4730-14-233-3891
Quick Disconnect Coupling Assembly

142333891
SDS0-60X63BAG: RNCC: 3 | RNVC: 2
SDS02-60-63Z: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-269-1810
Pipe Flange

142691810
7066CC1M25: RNCC: 2 | RNVC: 2
4730BE-25M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-576-2278
Non-Metallic Connecting Sleeve

145762278
ABS1150B08-001: RNCC: 1 | RNVC: 2
ABS1150B08-001: RNCC: 3 | RNVC: 2
ABS1150B08-001: RNCC: 5 | RNVC: 2

7 Jun 2013

4730-14-282-3049
Tube Union

142823049
0799-0062: RNCC: 3 | RNVC: 2
NF EN 560: RNCC: 4 | RNVC: 1
SAF0799-0062: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-229-5792
Raccord Souple Spec

142295792
AF32C: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-231-0938

4730-14-393-1735
Tube To Boss Straight Adapter

143931735
NO PRIMARY REF14-393-1735: RNCC: 3 | RNVC: 2
9-329-2757-202: RNCC: 5 | RNVC: 9

12 Apr 1984

4730-14-448-3269
Hose Expansion Ring

144483269
X153199-61-93015: RNCC: 3 | RNVC: 2
FIG111-6-8LAITON: RNCC: 5 | RNVC: 2

25 Jun 1991

4730-14-442-9692
Jeu Demi-Manchons

144429692
E10.06: RNCC: 3 | RNVC: 2
E10-0-6: RNCC: 5 | RNVC: 2
E1006: RNCC: 5 | RNVC: 2

7 Nov 1990

4730-14-569-9295
Check Valve Adapter

145699295
5014 012: RNCC: 3 | RNVC: 2

2 Nov 2011

4730-14-242-7962

4730-14-374-3098
Lot Rechange Raccor

143743098
4110-908-91: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-275-0516
Pipe Flange

142750516
6784-1CA10: RNCC: 2 | RNVC: 2
M315216: RNCC: 3 | RNVC: 2
RUAN7525-10: RNCC: 3 | RNVC: 2
MEC11187: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-210-1003
Mamelon Male Specia

142101003
A2-71545: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-428-9421
Pipe Flange

144289421
4730JAPN150DN25-11B2S-4,5: RNCC: 2 | RNVC: 2

28 Dec 1988

4730-14-446-4709
Bulkhead Hose Connector

144464709
0294301260: RNCC: 3 | RNVC: 2
302-293-601-0: RNCC: 5 | RNVC: 2

20 Mar 1991

4730-14-497-9351
Diaphragme Non Usin

144979351
MAT178-0119F12: RNCC: 3 | RNVC: 2

28 Oct 1997

4730-14-240-1385
Raccord Equipe

142401385
R692-02: RNCC: 3 | RNVC: 2
510238: RNCC: 5 | RNVC: 2
232741: RNCC: 5 | RNVC: 2
4V02032: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-569-5259
Quick Disconnect Coupling Assembly

145695259
NTA-212123: RNCC: 3 | RNVC: 2
212123: RNCC: 5 | RNVC: 2
NTA-212123: RNCC: 5 | RNVC: 2

23 Sep 2011

4730-14-222-3207
Te Tube Equipe

142223207
R106195: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-239-5154

4730-14-560-6120
Tube Tee

145606120
10452163: RNCC: 3 | RNVC: 2

5 May 2009

4730-14-273-5306

4730-14-221-3159
Vis Raccord Pompe

142213159
0941568053: RNCC: 3 | RNVC: 2
0941568053: RNCC: 5 | RNVC: 9
941568053: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-222-5061

4730-14-268-6408

4730-14-332-0662
Bulkhead Hose Connector

143320662
R7410Z31: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-560-0911
Adapter Bushing

145600911
16641: RNCC: 3 | RNVC: 2
66130: RNCC: 5 | RNVC: 2

23 Mar 2009

4730-14-522-3417
Return Tube Bend

145223417
36042000400: RNCC: 3 | RNVC: 2

19 Oct 2000

4730-14-320-5336
Fluid Passage Bolt

143205336
0000467932: RNCC: 3 | RNVC: 2
0000467932: RNCC: 5 | RNVC: 9
467932: RNCC: 5 | RNVC: 9

1 Jan 1975

Load More Results