What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 114 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 114 of 185

4730-14-230-5961
Tube Coupling Assembly

142305961
3601P40A: RNCC: 3 | RNVC: 2
3601P40A: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-252-1722
Tube Fitting Brazing Ferrule

142521722
17632: RNCC: 3 | RNVC: 2
17632: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-401-0741
Quick Disconnect Coupling Half

144010741
407M25X30: RNCC: 3 | RNVC: 2
407M25X30: RNCC: 3 | RNVC: 2
9213151: RNCC: 5 | RNVC: 2
FOE407M25X30: RNCC: 5 | RNVC: 9

29 May 1985

4730-14-468-3828
Hose To Boss Straight Adapter

144683828
E05300506: RNCC: 3 | RNVC: 2

23 Feb 1994

4730-14-408-4492
Tube To Boss Straight Adapter

144084492
LW114-NC3820S: RNCC: 3 | RNVC: 2
8401384247NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-450-6697
Fluid Passage Bolt

144506697
623510: RNCC: 3 | RNVC: 2

16 Oct 1991

4730-14-334-3375
Pipe Flange

143343375
403578: RNCC: 3 | RNVC: 9

23 Apr 1976

4730-14-543-9688
Return Tube Bend

145439688
0248303: RNCC: 3 | RNVC: 2

19 Dec 2004

4730-14-507-6607
Fluid Pressure Line Multiple Connector

145076607
WH15PLMKDSA3C: RNCC: 3 | RNVC: 2
435662: RNCC: 5 | RNVC: 9

11 Aug 1998

4730-14-572-3517
Pipe Flange

145723517
M2821353000000: RNCC: 3 | RNVC: 2

27 Jun 2012

4730-14-427-9195
Flexible Tube Coupling Assembly

144279195
DILATOFLEXNT1DN40GZ: RNCC: 3 | RNVC: 9

23 Nov 1988

4730-14-460-0742
Bulkhead Hose Connector

144600742
PM1A729009242A1: RNCC: 3 | RNVC: 2
PM1A729009242A1: RNCC: 5 | RNVC: 2

7 Jan 1993

4730-14-457-8922
Tube Tee

144578922
4730JCEG048,3X05: RNCC: 2 | RNVC: 2

26 Sep 1992

4730-14-456-6881
Pipe Flange

144566881
FL125: RNCC: 3 | RNVC: 2

23 Jul 1992

4730-14-480-7986
Lubrication Fitting

144807986
76029: RNCC: 3 | RNVC: 2

2 Apr 1996

4730-14-524-0585
Lubrication Fitting Adapter

145240585
CAS2383: RNCC: 3 | RNVC: 2

22 Feb 2001

4730-14-564-3920
Hose Coupling

145643920
A430400100058: RNCC: 3 | RNVC: 2
222EB036: RNCC: 5 | RNVC: 2

27 Apr 2010

4730-14-365-1526
Ga Goulotte-Support

143651526
969957: RNCC: 3 | RNVC: 2
969957: RNCC: 5 | RNVC: 9

2 Sep 1980

4730-14-487-5000
Raccord Intercommun

144875000
10152452: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-204-4859

4730-14-503-8613
Raccord Rond

145038613
3,920-757REP16: RNCC: 3 | RNVC: 2

4 Feb 1998

4730-14-512-3903
Tube To Boss Straight Adapter

145123903
1.683.457.084: RNCC: 3 | RNVC: 2

12 Feb 1999

4730-14-350-1310
Tube Tee

143501310
T4: RNCC: 3 | RNVC: 2
EA53326: RNCC: 5 | RNVC: 9

14 Jun 1978

4730-14-375-5069
Bouchon De Raccorde

143755069
130-5-23: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-479-7089
Fluid Pressure Line Multiple Connector

144797089
23626961-9: RNCC: 3 | RNVC: 2

31 Jan 1996

4730-14-506-8891
Tube Tee

145068891
130G 3-8: RNCC: 3 | RNVC: 2

27 May 1998

4730-14-552-6177
Pipe To Tube To Hose Tee

145526177
GENE E 290006A: RNCC: 3 | RNVC: 2

18 Jan 2007

4730-14-296-1116

4730-14-555-8086
Tube Coupling

145558086
0301031350: RNCC: 3 | RNVC: 2

14 Dec 2007

4730-14-550-5807
Pipe Flange

145505807
5010636059: RNCC: 3 | RNVC: 2

28 Jun 2006

4730-14-534-7911
Tube Coupling

145347911
1006-12: RNCC: 3 | RNVC: 2

7 Apr 2003

4730-14-501-8688
Hydraulic System Accessories Manifold

145018688
3082 108 043: RNCC: 3 | RNVC: 2
3082 108 043: RNCC: 5 | RNVC: 2

17 Nov 1997

4730-14-420-6463
Quick Disconnect Plug

144206463
80001: RNCC: 3 | RNVC: 2
1387: RNCC: 5 | RNVC: 2

16 Dec 1987

4730-14-218-1195
Raccord Special

142181195
502-551-598-0: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-515-3883
Tube To Boss Straight Adapter

145153883
6200407: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-269-2216
Sediment Strainer Element

142692216
13-1AREP5: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-474-9462
Quick Disconnect Coupling Half

144749462
WV0601400: RNCC: 3 | RNVC: 2
WV0601400: RNCC: 5 | RNVC: 9

14 Mar 1995

4730-14-272-1037
Tube Tee

142721037
TA35N: RNCC: 3 | RNVC: 2
17-35: RNCC: 3 | RNVC: 2
10A35: RNCC: 3 | RNVC: 2
T35: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-524-3398
Quick Disconnect Coupling Assembly

145243398
TB4050512: RNCC: 3 | RNVC: 2

14 Mar 2001

4730-14-320-1573
Tube Tee

143201573
0000365720: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-550-2181
Tube Tee

145502181
1607: RNCC: 3 | RNVC: 9

12 Jun 2006

4730-14-325-6776
Fluid Pressure Line Multiple Connector

143256776
0000364320: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-487-5460
Fluid Pressure Line Multiple Connector

144875460
RA1M521404290: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-334-4469
Fluid Pressure Line Multiple Connector

143344469
44101: RNCC: 3 | RNVC: 9

1 Jun 1976

4730-14-238-9363
Tube To Boss Straight Adapter

142389363
0374130: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-523-0554
Flange To Tube Elbow

145230554
29570: RNCC: 3 | RNVC: 2
3SU017: RNCC: 5 | RNVC: 2

20 Dec 2000

4730-14-360-0799
Tube To Boss Straight Adapter

143600799
09785A: RNCC: 3 | RNVC: 2
9785A: RNCC: 5 | RNVC: 9

31 Oct 1979

4730-14-345-2324
Bulkhead Hose Connector

143452324
A11A231253002U1: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-302-9969

4730-14-268-5145

4730-14-040-7544
Raccord Torique

140407544
216627S609: RNCC: 3 | RNVC: 2
216627: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-267-9901

4730-14-224-3835

4730-14-262-2904

4730-14-563-8079
Tube Tee

145638079
JNPMB6: RNCC: 3 | RNVC: 2
JNPMB6: RNCC: 5 | RNVC: 2

17 Mar 2010

4730-14-262-1556

4730-14-396-0597
Tube Tee

143960597
CM1168003: RNCC: 3 | RNVC: 9

27 Nov 1984

4730-14-504-0625
Tube Coupling

145040625
NNP4730878750168: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-238-6751
Pipeline Flexible Spacer

142386751
DILNE150MAR: RNCC: 3 | RNVC: 9
I131NE150MAR: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-412-0850
Quick Disconnect Coupling Half

144120850
LN320001DN100REP6TYPEA1: RNCC: 3 | RNVC: 2

6 Oct 1986

4730-14-355-5331
Tube Coupling Assembly

143555331
3811SB16A: RNCC: 3 | RNVC: 2
3811SB16A: RNCC: 5 | RNVC: 9

19 Mar 1979

4730-14-496-5482
Tube To Boss Straight Adapter

144965482
BMJ7-8: RNCC: 3 | RNVC: 2
F300 0T 021 6535: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-432-8332
Pipe Flange

144328332
X353262-4: RNCC: 3 | RNVC: 2

28 Jun 1989

4730-14-346-9685
Raccor Tourna Corps

143469685
A77163-1: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-325-3465
Limiteur De Pressio

143253465
R35511SM1A5-7: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-406-7261
Tube To Boss Straight Adapter

144067261
01010610: RNCC: 3 | RNVC: 2
439-644: RNCC: 5 | RNVC: 2
439-644: RNCC: 5 | RNVC: 2

8 Jan 1986

4730-14-516-3895
Tube To Boss Straight Adapter

145163895
206118: RNCC: 3 | RNVC: 2

22 Sep 1999

4730-14-314-1886
Tube To Boss Straight Adapter

143141886
A21815: RNCC: 3 | RNVC: 2
FG5B: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-314-4072
Tube Tee

143144072
B273189: RNCC: 3 | RNVC: 2
0853696600: RNCC: 5 | RNVC: 2
273189: RNCC: 5 | RNVC: 9
0853696600: RNCC: 5 | RNVC: 9
DBAB273189: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-309-5005
Pipeline Flexible Spacer

143095005
DILAT0FLEXN20HHPN40: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-367-7911

4730-14-271-3383
Raccord

142713383
5380556: RNCC: 3 | RNVC: 2
5380556: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-560-9648
Lubrication Fitting

145609648
933781R1: RNCC: 3 | RNVC: 2

4 Jun 2009

4730-14-335-1232

4730-14-574-0956
Moisture Trap

145740956
PR2: RNCC: 3 | RNVC: 2

5 Dec 2012

4730-14-377-5071

4730-14-347-8208

4730-14-250-6235

4730-14-453-8845
Tube Tee

144538845
R1012Z07: RNCC: 3 | RNVC: 2
924559: RNCC: 5 | RNVC: 2
89472358: RNCC: 5 | RNVC: 2

12 Mar 1992

4730-14-502-8029
Return Tube Bend

145028029
8T0404: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-526-1350
Fluid Passage Bolt

145261350
H109139: RNCC: 3 | RNVC: 2

4 Jul 2001

4730-14-432-9252
Tube Coupling

144329252
SUDO340CUDIAM12: RNCC: 3 | RNVC: 2
SUDO340CUDIAM12: RNCC: 5 | RNVC: 9

3 Jul 1989

4730-14-201-9970
Fluid Pressure Line Multiple Connector

142019970
50642: RNCC: 3 | RNVC: 2
VDP3066: RNCC: 5 | RNVC: 2
0851774200: RNCC: 5 | RNVC: 2

1 Jan 1962

4730-14-543-8069
Tube To Boss Straight Adapter

145438069
5605020: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-481-1101
Fluid Passage Bolt

144811101
ALZ999550020620: RNCC: 3 | RNVC: 2

18 Apr 1996

4730-14-566-5682
Coupling Retainer

145665682
290151DN50: RNCC: 3 | RNVC: 2

25 Nov 2010

4730-14-365-3456

4730-14-269-2103

4730-14-329-3098

4730-14-565-7761
Pipe To Tube Straight Adapter

145657761
5000810776: RNCC: 3 | RNVC: 2
20704682: RNCC: 5 | RNVC: 2
63AX3662: RNCC: 5 | RNVC: 2
10343406: RNCC: 6 | RNVC: 9

22 Sep 2010

4730-14-220-6085

4730-14-234-1845
Raccord Orientable

142341845
ES10972: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-265-9437
Tuyau Dinjection

142659437
DLT001168: RNCC: 3 | RNVC: 2
DLT001168: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-278-3129
Tube Tee

142783129
21 8-10X8-10X8-10: RNCC: 3 | RNVC: 2
21 8-10X8-10X8-10: RNCC: 3 | RNVC: 2
061250527: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-288-5424
Pipe Flange

142885424
E29203PN16DN65-76-1-1-A-A37: RNCC: 2 | RNVC: 2
E29-283DN65: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-450-5470
Tube To Boss Straight Adapter

144505470
G4BXSM010-1/2: RNCC: 3 | RNVC: 2
91713713: RNCC: 5 | RNVC: 2
G4BXSM010-1-2: RNCC: 5 | RNVC: 2

9 Oct 1991

4730-14-426-7732
Tube Tee

144267732
4730HEING076,1X7,1-26,9X2,9: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-255-8488
Bouchon Nipple De R

142558488
QSY20: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-499-7958
Fluid Passage Bolt

144997958
35421.7: RNCC: 3 | RNVC: 2
35421-7: RNCC: 3 | RNVC: 2
F300 0T 023 7863: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-429-3019
Quick Disconnect Coupling Half

144293019
637A16-1: RNCC: 3 | RNVC: 2

11 Jan 1989

4730-14-319-5505
Tube Coupling

143195505
HM44124-2: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-276-7062
Tube To Boss Straight Adapter

142767062
283269: RNCC: 3 | RNVC: 2
283269: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-538-1541
Tube Coupling Assembly

145381541
NGM0010031804009: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-432-9915
Pipe Coupling Leak Repair Clamp

144329915
A4H23271: RNCC: 3 | RNVC: 2

5 Jul 1989

4730-14-475-8373
Fluid Passage Bolt

144758373
VIS8SM10X1L27: RNCC: 3 | RNVC: 2
5010013649: RNCC: 5 | RNVC: 2
8SM10X1L27: RNCC: 5 | RNVC: 2

9 May 1995

4730-14-425-8986
Fluid Pressure Line Multiple Connector

144258986
20326886: RNCC: 3 | RNVC: 2
20326886: RNCC: 5 | RNVC: 9

28 Jul 1988

4730-14-425-1264
Hose To Boss Straight Adapter

144251264
621240: RNCC: 3 | RNVC: 2

22 Jun 1988

4730-14-518-3539
Tube To Boss Straight Adapter

145183539
RLL2: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-484-2020
Hose Coupling Assembly

144842020
RA1M729006500: RNCC: 3 | RNVC: 2

31 Oct 1996

4730-14-268-5099

4730-14-367-7298

4730-14-266-4270
Tube To Boss Straight Adapter

142664270
A6155-7: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-508-9032
Straight Tubing Connector

145089032
K102858: RNCC: 3 | RNVC: 2

7 Oct 1998

4730-14-308-8286

4730-14-347-3366

4730-14-266-6338
Corps Raccord Auto-

142666338
A74215: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-256-7594

4730-14-411-3867
Accouplemen Raccord

144113867
DA2C555001504: RNCC: 3 | RNVC: 2

6 Aug 1986

4730-14-261-6677
Ecrou De Raccord

142616677
8101: RNCC: 3 | RNVC: 2
8101: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-258-3567

4730-14-247-7944

4730-14-216-9038

4730-14-503-2047
Tube Coupling

145032047
RA1M504901056: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-432-5341
Bulkhead Hose Connector

144325341
DA2C204508710A1: RNCC: 3 | RNVC: 2

14 Jun 1989

4730-14-404-4033
Tube Tee

144044033
TS434FF: RNCC: 3 | RNVC: 2

30 Oct 1985

4730-14-496-3426
Tube To Boss Straight Adapter

144963426
167923: RNCC: 3 | RNVC: 2
F300 0T 021 4161: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-316-0008
Tube Fitting Brazing Ferrule

143160008
0264752780: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-344-1017
Pipe Flange

143441017
7068F38UE8: RNCC: 2 | RNVC: 2

13 Jul 1977

4730-14-267-6161
Sediment Strainer Element

142676161
1693F50ETFD50: RNCC: 3 | RNVC: 2
1693F50ETFD50: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-430-6041
Fluid Pressure Line Multiple Connector

144306041
462016: RNCC: 3 | RNVC: 2
462016: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-554-9143
Tube To Boss Straight Adapter

145549143
717065: RNCC: 3 | RNVC: 2

7 Sep 2007

4730-14-222-1732
Fluid Pressure Line Multiple Connector

142221732
0000131541: RNCC: 3 | RNVC: 2
0000131541: RNCC: 5 | RNVC: 9
131541: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-212-9321
Fluid Passage Bolt

142129321
50212: RNCC: 3 | RNVC: 2
50212: RNCC: 5 | RNVC: 2
9567120010: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-393-4332
Sediment Strainer Element

143934332
0288107380: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-542-1770
Hose To Gas Fitting Straight Adapter

145421770
10030105: RNCC: 3 | RNVC: 2
10030105: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-323-9214
Pipe Flange

143239214
7062TD1F1F121UE12: RNCC: 2 | RNVC: 2

1 Jan 1975

4730-14-503-3471
Tube Coupling

145033471
1230603010: RNCC: 3 | RNVC: 2
123060301: RNCC: 3 | RNVC: 9

13 Jan 1998

4730-14-577-4640
Quick Disconnect Coupling Half

145774640
026293: RNCC: 3 | RNVC: 2

18 Sep 2013

4730-14-319-5514
Embase De Jauge

143195514
H43801: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-575-4646
Hose Coupling

145754646
D820 025: RNCC: 3 | RNVC: 2

9 Apr 2013

4730-14-564-6885
Hydraulic Manifold Assembly

145646885
14100068831: RNCC: 3 | RNVC: 2

26 May 2010

4730-14-347-8211

4730-14-339-8339

4730-14-304-0355
Diaphragme Special

143040355
AS34TE2AREP6: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-274-7707
Noix De Raccord

142747707
86413: RNCC: 3 | RNVC: 2
9567158160: RNCC: 5 | RNVC: 2
86413: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-559-4188
Bulkhead Hose Connector

145594188
NSA855032-4: RNCC: 1 | RNVC: 2
PE20215-04: RNCC: 3 | RNVC: 2

12 Jan 2009

4730-14-537-3689
Distributeur

145373689
499-1001: RNCC: 3 | RNVC: 2

27 Oct 2003

4730-14-319-8921
Mise Air Li Raccord

143198921
140M157: RNCC: 3 | RNVC: 9

1 Jan 1975

4730-14-560-0869
Hose Plug

145600869
15872: RNCC: 3 | RNVC: 2
66407: RNCC: 5 | RNVC: 2

23 Mar 2009

4730-14-240-2459
Raccord Special

142402459
152432: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-351-9130

4730-14-545-1171
Quick Disconnect Coupling Half

145451171
GA0066314: RNCC: 3 | RNVC: 2
086235P: RNCC: 5 | RNVC: 2

18 Mar 2005

4730-14-474-4713
Lubrication Fitting

144744713
9466021100: RNCC: 3 | RNVC: 2
F300 0T 015 5147: RNCC: 5 | RNVC: 9

15 Feb 1995

4730-14-311-3323
Fluid Pressure Line Multiple Connector

143113323
215010: RNCC: 3 | RNVC: 9
061215010: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-294-0690
Quick Disconnect Coupling Half

142940690
E29572E80BZ: RNCC: 2 | RNVC: 2

1 Jan 1973

4730-14-484-2747
Pipe Flange

144842747
F0A0016: RNCC: 3 | RNVC: 2
FOA0016: RNCC: 5 | RNVC: 9

31 Oct 1996

4730-14-301-3300

4730-14-550-1752
Quick Disconnect Coupling Half

145501752
NC 400 002 0: RNCC: 3 | RNVC: 2

6 Jun 2006

4730-14-469-6476
Flange To Tube Straight Adapter

144696476
PM1A765112111: RNCC: 3 | RNVC: 2
PM1A765112111: RNCC: 5 | RNVC: 2

4 May 1994

4730-14-360-0757
Embout De Purge

143600757
10765A: RNCC: 3 | RNVC: 2
10765A: RNCC: 5 | RNVC: 9

31 Oct 1979

4730-14-450-5457
Tube To Boss Straight Adapter

144505457
F40XS32-1,1/4: RNCC: 3 | RNVC: 2
91712748: RNCC: 5 | RNVC: 2

9 Oct 1991

4730-14-575-5166
Fluid Pressure Line Multiple Connector

145755166
4016174: RNCC: 3 | RNVC: 2

12 Apr 2013

4730-14-297-3241

4730-14-564-8988
Suction Strainer

145648988
149B 2140: RNCC: 3 | RNVC: 2

16 Jun 2010

4730-14-460-1717
Tube To Hose Straight Adapter

144601717
2401G27725SNU: RNCC: 3 | RNVC: 2

13 Jan 1993

4730-14-370-4302
Tube To Boss Straight Adapter

143704302
13015070Q: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-525-6334
Tube To Boss Straight Adapter

145256334
20 236 916 4190: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-226-3927
Pipe Expansion Joint

142263927
227587: RNCC: 3 | RNVC: 2
SOG227587: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-525-1919
Hydraulic Manifold Assembly

145251919
2418455174: RNCC: 3 | RNVC: 2
06310P122104: RNCC: 3 | RNVC: 2

23 May 2001

4730-14-230-5983
Tube Coupling Assembly

142305983
3951S16X10X16A: RNCC: 3 | RNVC: 2
3951S16X10X16A: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-547-9468
Hydraulic System Accessories Manifold

145479468
02135803008: RNCC: 3 | RNVC: 2

29 Nov 2005

4730-14-448-3870
Quick Disconnect Coupling Assembly Set

144483870
1108-990: RNCC: 3 | RNVC: 2

26 Jun 1991

4730-14-524-3397
Quick Disconnect Coupling Assembly

145243397
TB4050511: RNCC: 3 | RNVC: 2

14 Mar 2001

4730-14-320-1559
Fluid Passage Bolt

143201559
108-14-26: RNCC: 3 | RNVC: 2
108-14-26: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-554-2646
Tube-Hose Adapter Body

145542646
TM2147G001: RNCC: 3 | RNVC: 2

15 Jun 2007

4730-14-504-4870
Fluid Pressure Line Multiple Connector

145044870
TR95965: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-521-1797
Pipe-Tube Escutcheon

145211797
9136011: RNCC: 3 | RNVC: 2

12 Jul 2000

4730-14-324-1471
Bulkhead Hose Connector

143241471
000MA0230F25REP1A4: RNCC: 3 | RNVC: 2
000MA230F25REP1A4: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-382-8729
Tube To Boss Straight Adapter

143828729
PE60841H28: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-425-0958
Tube To Gas Fitting Straight Adapter

144250958
GE14SRED71: RNCC: 3 | RNVC: 2
GE14SRED71: RNCC: 3 | RNVC: 9
GE14PSRED1.4571: RNCC: 5 | RNVC: 9
GE14PSRED71: RNCC: 5 | RNVC: 9

21 Jun 1988

4730-14-398-0141
Tube To Boss Straight Adapter

143980141
A32073: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-408-2019
Equipe Embout

144082019
CPH8E40791: RNCC: 3 | RNVC: 2

19 Mar 1986

4730-14-444-1004
Pipe Flange

144441004
IB-BR3/4-L1/DIV50: RNCC: 3 | RNVC: 2
IB-BR3/4-L1: RNCC: 5 | RNVC: 2

18 Dec 1990

4730-14-555-6163
Tube Tee

145556163
41A12/8.13F-NU: RNCC: 3 | RNVC: 2
241101182: RNCC: 5 | RNVC: 2
5005030686: RNCC: 5 | RNVC: 2
0024248242: RNCC: 5 | RNVC: 9

3 Dec 2007

4730-14-262-1724
Pipe Flange

142621724
7062DL1F1F36-3-5-14CD2-5: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-424-0801
Pipe Flange

144240801
9801-34-51: RNCC: 3 | RNVC: 2
9801-34-51: RNCC: 3 | RNVC: 2

11 May 1988

4730-14-494-8315
Fluid Pressure Line Multiple Connector

144948315
NO PRIMARY REF14-494-8315: RNCC: 3 | RNVC: 2
517124: RNCC: 5 | RNVC: 9
F300 0T 017 9590: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-414-2310
Pipe Flange

144142310
U1240-11D1SPN150DN32Z2CND17-12T3: RNCC: 3 | RNVC: 2

27 Jan 1987

4730-14-371-0469
Tube To Boss Straight Adapter

143710469
4730AB4.3DN10EQUIPE: RNCC: 2 | RNVC: 2
89011013: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-493-2858
Fluid Flow Restrictor

144932858
8806010150: RNCC: 3 | RNVC: 2
F300 0T 011 9553: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-524-8793
Tube To Boss Straight Adapter

145248793
436929: RNCC: 3 | RNVC: 9

25 Apr 2001

4730-14-469-0080
Tube Fitting Brazing Ferrule

144690080
99692301313: RNCC: 3 | RNVC: 2

30 Mar 1994

4730-14-442-9195
Valve Adapter Assembly

144429195
M4Z7101966301: RNCC: 3 | RNVC: 2

7 Nov 1990

4730-14-224-4286
Sediment Strainer Element

142244286
44302030000: RNCC: 3 | RNVC: 2
603003930: RNCC: 5 | RNVC: 2
393: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-493-3128
Flange To Hose Elbow

144933128
601653: RNCC: 3 | RNVC: 2
F300 0T 012 1733: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-282-2459
Tube To Boss Straight Adapter

142822459
11067: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-330-9397
Sediment Strainer Element

143309397
143F: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-359-4894
Tube To Boss Straight Adapter

143594894
RA8X10: RNCC: 3 | RNVC: 2
91352672: RNCC: 5 | RNVC: 2

15 Oct 1979

4730-14-488-6833
Fluid Pressure Line Multiple Connector

144886833
251832400: RNCC: 3 | RNVC: 2

28 May 1997

4730-14-480-5215
Hose Connector Sleeve

144805215
90 11 10: RNCC: 3 | RNVC: 2

14 Mar 1996

4730-14-493-0534
Tube To Boss Straight Adapter

144930534
2725301MI: RNCC: 3 | RNVC: 2
F300 0T 009 7490: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-460-9168
Fluid Pressure Line Multiple Connector

144609168
TB4012101: RNCC: 3 | RNVC: 2

16 Feb 1993

4730-14-464-6439
Hydraulic Manifold Assembly

144646439
032131B: RNCC: 3 | RNVC: 2

18 Aug 1993

4730-14-323-9209
Pipe Flange

143239209
7062TD1F1M98UE12: RNCC: 2 | RNVC: 2

1 Jan 1975

4730-14-216-2131
Tube Tee

142162131
R7610: RNCC: 3 | RNVC: 2
99058251: RNCC: 5 | RNVC: 2
99058251: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-301-8114
Sediment Strainer Element

143018114
2019TADN15: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-395-7603
Bulkhead Hose Connector

143957603
DA2C721263A1: RNCC: 3 | RNVC: 2

30 Oct 1984

4730-14-325-9554
Pipe Flange

143259554
522345: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-550-6851
Fluid Pressure Line Multiple Connector

145506851
RA1B726220001: RNCC: 3 | RNVC: 2

6 Jul 2006

4730-14-506-0360
Bulkhead Hose Connector

145060360
RA1M521404140: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-512-5975
Tube Coupling

145125975
201605: RNCC: 3 | RNVC: 2

17 Feb 1999

4730-14-508-6378
Tube To Hose Straight Adapter

145086378
K15241PC585A: RNCC: 3 | RNVC: 2
K15241PC500AREP85: RNCC: 5 | RNVC: 2

23 Sep 1998

4730-14-475-5652
Fluid Passage Bolt

144755652
L513040: RNCC: 3 | RNVC: 2
10425783: RNCC: 5 | RNVC: 2
DBAL513040: RNCC: 5 | RNVC: 9

19 Apr 1995

4730-14-527-3856
Tube To Boss Straight Adapter

145273856
H145349: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-293-2805
Tube Tee

142932805
990A420: RNCC: 3 | RNVC: 2
32888: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-362-9287
Sediment Strainer Element

143629287
970428: RNCC: 3 | RNVC: 2
970428: RNCC: 5 | RNVC: 9

19 Mar 1980

4730-14-438-5128
Bulkhead Hose Connector

144385128
DA2C521001009U1: RNCC: 3 | RNVC: 2

21 Mar 1990

4730-14-451-6477
Tube To Hose Straight Adapter

144516477
85448: RNCC: 3 | RNVC: 2
85448: RNCC: 5 | RNVC: 2

28 Nov 1991

4730-14-525-0735
Tube To Hose Straight Adapter

145250735
PE67409LE20: RNCC: 3 | RNVC: 2

16 May 2001

4730-14-500-2871
Quick Disconnect Coupling Half

145002871
NC0064160: RNCC: 3 | RNVC: 2
F300 0T 024 2938: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-453-7855
Pipe Flange

144537855
95533426: RNCC: 3 | RNVC: 2

10 Mar 1992

4730-14-309-8875
Tube Coupling Assembly

143098875
3601P63A: RNCC: 3 | RNVC: 2
3601P63A: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-391-2988
Tube To Boss Straight Adapter

143912988
4665: RNCC: 3 | RNVC: 9

1 Mar 1984

4730-14-430-6040
Fluid Pressure Line Multiple Connector

144306040
460603: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-299-9713
Sediment Strainer Body

142999713
FY3IN: RNCC: 3 | RNVC: 9

1 Jan 1973

4730-14-216-0284
Pipe Flange

142160284
47730: RNCC: 3 | RNVC: 2
47730: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-295-4838
Retenue Ecrou-Racco

142954838
0400320130: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-577-1199
Pipe Tee

145771199
ASNA3752D121012: RNCC: 1 | RNVC: 2
ASNA3752D121012: RNCC: 3 | RNVC: 2
ASNA3752D121012: RNCC: 5 | RNVC: 2

8 Aug 2013

4730-14-423-4299
Pipe Flange

144234299
UA50088006PN150-11C1DN80: RNCC: 2 | RNVC: 2
4730HCPN150DN08011C1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-418-5548
Sediment Strainer Parts Kit

144185548
E10-100-956-68-68REP3ET11: RNCC: 3 | RNVC: 9

2 Sep 1987

4730-14-207-1383
Fluid Passage Bolt

142071383
NO PRIMARY REF14-207-1383: RNCC: 3 | RNVC: 2
304051: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-333-5306
Partie Mobile

143335306
GSM425-007F10REP1: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-040-5489
Raccord

140405489
NO PRIMARY REF14-040-5489: RNCC: 3 | RNVC: 2
11612: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-442-7355
Tube Tee

144427355
JBAB12-12-16: RNCC: 3 | RNVC: 2

29 Oct 1990

4730-14-418-6533
Pipe Flange

144186533
E29203-01B-PN16DN150BF42N: RNCC: 2 | RNVC: 2
MEC10716: RNCC: 3 | RNVC: 2
4730CJ-DN150: RNCC: 5 | RNVC: 2

9 Sep 1987

4730-14-283-2377
Tube To Boss Straight Adapter

142832377
0729-0629: RNCC: 3 | RNVC: 2
SAF0729-0629: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-298-4685
Tube Fitting Brazing Ferrule

142984685
GSM163-011F7-1Z: RNCC: 3 | RNVC: 2
GSM163-11-1Z: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-258-8366
Fluid Pressure Line Multiple Connector

142588366
351023: RNCC: 3 | RNVC: 2
1085A: RNCC: 5 | RNVC: 2
A102080: RNCC: 5 | RNVC: 2
DBA351023: RNCC: 5 | RNVC: 9
A102080: RNCC: 6 | RNVC: 9

1 Jan 1969

4730-14-500-8448
Tube To Boss Straight Adapter

145008448
E65109004001: RNCC: 3 | RNVC: 2
F300 0T 024 8650: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-503-1849
Bulkhead Hose Connector

145031849
RA1M592004121: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-242-5411
Sediment Strainer Element

142425411
50647: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-273-8221
Tube To Boss Straight Adapter

142738221
MF16: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-504-5269
Fuel Feeder Manifold

145045269
1820327C2: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-032-1584
Pipe Flange

140321584
CMT30E9030AF5ET6DE57REP2: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-511-8552
Tube Coupling

145118552
3434370: RNCC: 3 | RNVC: 2

27 Jan 1999

4730-14-225-9253

4730-14-260-9416

4730-14-269-1800

4730-14-362-1311
Sediment Strainer Element

143621311
FZD402570: RNCC: 3 | RNVC: 2
FZD402570: RNCC: 5 | RNVC: 2

20 Feb 1980

4730-14-383-1299
Fluid Passage Bolt

143831299
52S1403002: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-514-3671
Fluid Pressure Line Multiple Connector

145143671
RA1M726210001A1: RNCC: 3 | RNVC: 2

18 May 1999

4730-14-545-1527
Tube Coupling

145451527
19211717: RNCC: 3 | RNVC: 2
242210.00.25: RNCC: 3 | RNVC: 2

22 Mar 2005

4730-14-330-9513
Swivel Retaining Pipe Flange

143309513
A10250: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-536-0865
Tube Coupling

145360865
91802002916: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-468-2583
Pipeline Flexible Spacer

144682583
30339-55: RNCC: 3 | RNVC: 2

16 Feb 1994

4730-14-484-0245
Air Hose Connector

144840245
F1309141: RNCC: 3 | RNVC: 2

17 Oct 1996

4730-14-277-7097
Pipe Flange

142777097
28106: RNCC: 3 | RNVC: 9

1 Jan 1971

4730-14-441-1305
Tube Tee

144411305
TSI12M: RNCC: 3 | RNVC: 9
99151531: RNCC: 5 | RNVC: 2

22 Aug 1990

4730-14-502-4616
Quick Disconnect Coupling Half

145024616
80-9405000: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-456-5353
Pipe Flange

144565353
14101240K: RNCC: 3 | RNVC: 2

8 Jul 1992

4730-14-525-8314
Tube To Boss Straight Adapter

145258314
A108859: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-297-8947
Bloc De Derivation

142978947
411MA0162FA12: RNCC: 3 | RNVC: 2
411MA162FA12: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-339-1070
Tube To Boss Straight Adapter

143391070
GSM514-001F7: RNCC: 3 | RNVC: 2
GSM514-01F7: RNCC: 5 | RNVC: 2
411MA027REP2: RNCC: 5 | RNVC: 2
A0210F7: RNCC: 5 | RNVC: 2

17 Dec 1976

4730-14-564-4717
Hose Clamp

145644717
82039958000: RNCC: 3 | RNVC: 2

30 Apr 2010

4730-14-578-4684
Hose Clamp

145784684
8002856: RNCC: 3 | RNVC: 2

3 Dec 2013

4730-14-321-5849
Pipe Flange

143215849
U1092EB87: RNCC: 2 | RNVC: 2
7067E87: RNCC: 5 | RNVC: 9
7067E87C337CL2: RNCC: 5 | RNVC: 9
7067E87GAMMM12CU-AL9NI3FE2: RNCC: 5 | RNVC: 9
7067E87GAMMM11CU-AL9NI3FE2: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-031-1502
Tube To Boss Straight Adapter

140311502
9114252751: RNCC: 3 | RNVC: 2
9414252758: RNCC: 5 | RNVC: 2
VDP3631: RNCC: 5 | RNVC: 2
A4-25-21-27-51: RNCC: 5 | RNVC: 9

14 Jun 1980

4730-14-297-6234
Tube To Boss Straight Adapter

142976234
1982ZB00-02: RNCC: 3 | RNVC: 9
1982ZB00-02: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-355-5641
Tube Reducer

143555641
G12-13G17: RNCC: 3 | RNVC: 9

19 Mar 1979

4730-14-371-0476
Torsion Helical Spring

4730-14-561-1469
Tube Tee

145611469
TA 14S: RNCC: 3 | RNVC: 2
02101331: RNCC: 5 | RNVC: 2
03101331: RNCC: 5 | RNVC: 9

19 Jun 2009

4730-14-223-8666

4730-14-570-0004
Filler Cap Adapter Assembly

145700004
AT8SB2976: RNCC: 3 | RNVC: 2

9 Nov 2011

4730-14-565-2060
Tube Elbow

145652060
821.000.050: RNCC: 3 | RNVC: 2
SA017872: RNCC: 5 | RNVC: 2

26 Jul 2010

4730-14-361-4021

4730-14-336-4407

4730-14-042-9082
Raccord Support

140429082
A11A230352040: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-286-9182

4730-14-280-6631
Raccord Assemble

142806631
261375: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-564-2425
Hydraulic Manifold Assembly

145642425
10677152000: RNCC: 3 | RNVC: 2

19 Apr 2010

4730-14-263-6682
Fluid Pressure Line Multiple Connector

142636682
0176-525156: RNCC: 3 | RNVC: 2
0176 5251560: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-222-5291
Lubricant Pressure Relief Fitting

142225291
NO PRIMARY REF14-222-5291: RNCC: 3 | RNVC: 2
9030271: RNCC: 5 | RNVC: 9
CP1099: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-562-5546
Pipeline Flexible Spacer

145625546
0429050: RNCC: 3 | RNVC: 2
A1/ 050/ KR320-WG/ P/AV: RNCC: 3 | RNVC: 2

3 Nov 2009

4730-14-353-1072
Tube To Boss Straight Adapter

143531072
C60-32: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-473-7145
Tube Union

144737145
FLEX1L48,3PN16EPDM/INOX: RNCC: 3 | RNVC: 2
STRAUB-FLEX1L48,3EPDM/INOX: RNCC: 5 | RNVC: 2
190 0481: RNCC: 5 | RNVC: 9

10 Jan 1995

4730-14-277-5454
Quick Disconnect Coupling Half

142775454
9959702: RNCC: 3 | RNVC: 2
9959702: RNCC: 3 | RNVC: 9
5602-16-16: RNCC: 5 | RNVC: 9
9-95-97-02: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-377-1367
Fluid Pressure Line Multiple Connector

143771367
10-222-001-31: RNCC: 3 | RNVC: 2
1022200131: RNCC: 5 | RNVC: 2

17 May 1982

4730-14-223-2325
Boulon Raccord Avec

142232325
46169: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-350-2409

4730-14-347-8537

4730-14-567-9448
Tube Coupling

145679448
41181A020001: RNCC: 3 | RNVC: 2

27 Apr 2011

4730-14-354-2838

4730-14-370-5069

4730-14-490-8632
Union

144908632
4048 375 191 123: RNCC: 3 | RNVC: 2
F300 0T 000 4868: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-209-1265

4730-14-513-7413
Tube Union

145137413
J50301: RNCC: 3 | RNVC: 2
RAQ0502: RNCC: 5 | RNVC: 2
J50301: RNCC: 5 | RNVC: 2

9 Apr 1999

4730-14-398-0345
Fluid Pressure Line Multiple Connector

143980345
620575: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-395-0492
Fluid Passage Bolt

143950492
0301511620: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-553-8065
Tube To Boss Straight Adapter

145538065
120 023: RNCC: 3 | RNVC: 2
120 023: RNCC: 3 | RNVC: 2

22 May 2007

4730-14-459-5540
Bulkhead Hose Connector

144595540
90079200016: RNCC: 3 | RNVC: 2

10 Dec 1992

4730-14-377-0871

4730-14-237-6835
Te Tube Equipe

142376835
1814: RNCC: 3 | RNVC: 2
1814: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-249-8471

4730-14-242-7969
Swivel Retaining Pipe Flange

142427969
7062CA1F1-108UA10: RNCC: 3 | RNVC: 9

1 Jan 1967

4730-14-419-9857
Self-Sealing Coupling Assembly

144199857
K06-44-2002: RNCC: 3 | RNVC: 2

13 Nov 1987

4730-14-537-8415
Quick Disconnect Coupling Half

145378415
1632-108T: RNCC: 3 | RNVC: 2
622118: RNCC: 5 | RNVC: 2

27 Nov 2003

4730-14-269-1784
Pipe Flange

142691784
7066CB1-25: RNCC: 2 | RNVC: 2
4730BD-25: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-354-1327
Tube To Boss Straight Adapter

143541327
P4-1204-12-12-17C0: RNCC: 3 | RNVC: 2

19 May 1999

4730-14-515-1227
Hose Expansion Ring

145151227
365A76-8038-20: RNCC: 3 | RNVC: 2

7 Jul 1999

4730-14-450-6640
Intermediai Raccord

144506640
624280: RNCC: 3 | RNVC: 2

16 Oct 1991

4730-14-547-3806
Tube To Hose Straight Adapter

145473806
782734: RNCC: 3 | RNVC: 2

11 Oct 2005

4730-14-460-4531
Quick Disconnect Coupling Assembly

144604531
5005330068: RNCC: 3 | RNVC: 2
5005330152: RNCC: 3 | RNVC: 2
89472092: RNCC: 5 | RNVC: 2

26 Jan 1993

4730-14-428-0492
Tete Equipee Degaze

144280492
03350003100509A: RNCC: 3 | RNVC: 2

24 Nov 1988

4730-14-297-8969
Bloc De Derivation

142978969
411MA0162FB22: RNCC: 3 | RNVC: 2
411MA162FB22: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-546-4747
Tube Union

145464747
0024248329: RNCC: 3 | RNVC: 2

6 Jul 2005

4730-14-576-9248
Soil Pipe Coupling

145769248
547561-101: RNCC: 3 | RNVC: 2
4730MT0200137: RNCC: 6 | RNVC: 9

23 Jul 2013

4730-14-390-6604
Contre-Bride

143906604
E64-35-3200-122EF12-23ETF13-23D-: RNCC: 3 | RNVC: 1

26 Jan 1984

4730-14-358-6067
Tube Tee

143586067
Q0-3R12X10X10: RNCC: 3 | RNVC: 2

7 Sep 1979

4730-14-294-1110
Raccord Equipe

142941110
T02377-45: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-298-8031
Pipeline Flexible Spacer

142988031
D1512-563: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-525-4249
Fluid Passage Bolt

145254249
702A30-0144-20: RNCC: 3 | RNVC: 2

30 May 2001

4730-14-411-2521
Raccord Fusible

144112521
38400B20-1: RNCC: 3 | RNVC: 2
704A34-423-019: RNCC: 5 | RNVC: 2
38400B20-1: RNCC: 5 | RNVC: 2

6 Aug 1986

4730-14-373-0585
Tube Union

143730585
MAT113-01-00-1: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-455-6888
Tube Union

144556888
RL15: RNCC: 3 | RNVC: 2

11 Jun 1992

4730-14-256-9355

4730-14-569-0598
Pipe Expansion Joint

145690598
X0150045: RNCC: 3 | RNVC: 2

2 Aug 2011

4730-14-257-4568

4730-14-323-3182

4730-14-477-8398
Tube To Boss Straight Adapter

144778398
101160601040: RNCC: 3 | RNVC: 2

27 Sep 1995

4730-14-496-3828
Tube To Boss Straight Adapter

144963828
192386: RNCC: 3 | RNVC: 2
F300 0T 021 4706: RNCC: 6 | RNVC: 9
192386: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-543-6781
Tube To Hose Straight Adapter

145436781
717179: RNCC: 3 | RNVC: 2

2 Dec 2004

4730-14-414-1132
Tube Coupling

144141132
37220: RNCC: 3 | RNVC: 2

22 Jan 1987

4730-14-499-1620
Fluid Pressure Line Multiple Connector

144991620
20000-801: RNCC: 3 | RNVC: 2
101014006010A: RNCC: 3 | RNVC: 9
F300 0T 019 6751: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-372-5146
Tube To Gas Fitting Straight Adapter

143725146
34600003: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-355-5334
Tube Coupling Assembly

143555334
3951SB20X16X16A: RNCC: 3 | RNVC: 2
3951SB20X16X16A: RNCC: 5 | RNVC: 9

19 Mar 1979

4730-14-548-9436
Tube To Boss Straight Adapter

145489436
90872113: RNCC: 3 | RNVC: 2

24 Feb 2006

4730-14-428-9699
Fluid Pressure Line Multiple Connector

144289699
000200154200: RNCC: 3 | RNVC: 2

2 Jan 1989

4730-14-458-5874
Fluid Flow Restrictor

144585874
DLT119103: RNCC: 3 | RNVC: 2

27 Oct 1992

4730-14-427-4479
Tube Tee

144274479
4730JCEG219,1X12,5: RNCC: 2 | RNVC: 2

20 Oct 1988

4730-14-534-0637
Hose Coupling Assembly

145340637
RFFT10X100: RNCC: 3 | RNVC: 2
EN001703: RNCC: 6 | RNVC: 9

12 Mar 2003

4730-14-233-8838

4730-14-300-7072
Crepine Aspiration

143007072
45267: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-249-1338
Raccord Special

142491338
151471: RNCC: 3 | RNVC: 2
89403195: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-569-1126
Fluid Passage Bolt

145691126
A560201: RNCC: 3 | RNVC: 2

9 Aug 2011

4730-14-501-2187
Tube To Boss Straight Adapter

145012187
422-303: RNCC: 3 | RNVC: 2
422.303: RNCC: 3 | RNVC: 2
F300 0T 025 2592: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-341-7352
Tube To Boss Straight Adapter

143417352
NO PRIMARY REF14-341-7352: RNCC: 3 | RNVC: 2
2501: RNCC: 5 | RNVC: 9
GE12SM: RNCC: 5 | RNVC: 9

14 Apr 1977

4730-14-447-4884
Pipe Flange

144474884
LN327-016-11B-PN50DN65: RNCC: 3 | RNVC: 2

24 May 1991

4730-14-209-1272
Tube To Boss Straight Adapter

142091272
NO PRIMARY REF14-209-1272: RNCC: 3 | RNVC: 2
215649: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-416-9086
Tube Tee

144169086
F530-10-04: RNCC: 3 | RNVC: 2

25 Jun 1987

4730-14-389-7937
Pipe Flange

143897937
MN6363-1F4-5DN40: RNCC: 2 | RNVC: 2

20 Dec 1983

4730-14-417-7878
Tube To Boss Straight Adapter

144177878
UMIISO10X16-150: RNCC: 3 | RNVC: 9

22 Jul 1987

4730-14-342-1563
Bulkhead Hose Connector

143421563
EA1M524-014: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-345-2014
Fluid Pressure Line Multiple Connector

143452014
906-14-90ARSK: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-480-5653
Fluid Flow Restrictor

144805653
002421430A: RNCC: 3 | RNVC: 2
8360-142: RNCC: 3 | RNVC: 2

14 Mar 1996

4730-14-392-5874
Fluid Pressure Line Multiple Connector

143925874
BM911-18-90K: RNCC: 3 | RNVC: 2
9560128290: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-412-3088
Pipe Clamp Coupling

144123088
2783-02-40E: RNCC: 3 | RNVC: 2

8 Oct 1986

4730-14-418-8947
Equipe Raccord

144188947
DA1D745212: RNCC: 3 | RNVC: 2

16 Sep 1987

4730-14-557-6100
Tube To Boss Straight Adapter

145576100
GE12LMEDOMDCF: RNCC: 3 | RNVC: 2
437163: RNCC: 5 | RNVC: 2
GE12LMEDOMDCF: RNCC: 5 | RNVC: 2

26 Jun 2008

4730-14-476-8129
Drainage Pipe Coupling

144768129
FA1E250-90-01: RNCC: 3 | RNVC: 2

5 Jul 1995

4730-14-423-4607
Pipe Flange

144234607
UA50088006PN250-11D1SDN20: RNCC: 2 | RNVC: 2
4730HCPN250DN02011D1S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-494-8259
Fluid Pressure Line Multiple Connector

144948259
NO PRIMARY REF14-494-8259: RNCC: 3 | RNVC: 2
504894: RNCC: 5 | RNVC: 9
F300 0T 017 9518: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-389-6304
Tube To Boss Straight Adapter

143896304
8405-28-34: RNCC: 3 | RNVC: 2
84052834: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-217-5625
Quick Disconnect Coupling Assembly

142175625
SS1-32BDB: RNCC: 3 | RNVC: 2
SS12-30X32: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-346-7091

4730-14-397-0295

4730-14-252-6146

4730-14-428-5866
Equipe Raccord

144285866
SBE898: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-271-8814
Raccord Intermediai

142718814
NO PRIMARY REF14-271-8814: RNCC: 3 | RNVC: 2
23163: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-333-5078
Sous Ensemble Bride

143335078
GSM166-003F31: RNCC: 3 | RNVC: 2
GSM166-03F31: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-294-2274
Collecteur Ebauche

142942274
121E52-175-05-01: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-449-9566
Quick Disconnect Coupling Half

144499566
PSA06-1116/LD/VI: RNCC: 3 | RNVC: 2
PSA06-1116LNSVI: RNCC: 3 | RNVC: 2
PSA06-1116NSVI: RNCC: 3 | RNVC: 2

18 Sep 1991

4730-14-504-0995
Tube To Boss Straight Adapter

145040995
MAT164-0316F8: RNCC: 3 | RNVC: 2

6 Feb 1998

4730-14-504-1460
Tube To Boss Swivel Joint

145041460
GA47694-100: RNCC: 3 | RNVC: 2

10 Feb 1998

4730-14-335-7969
Fluid Pressure Line Multiple Connector

143357969
702A30-0624-20: RNCC: 3 | RNVC: 2

7 Mar 1996

4730-14-371-1525
Bulkhead Hose Connector

143711525
330A61-3412-01: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-339-1490
Purgeur Rapide

143391490
346-00-011: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-479-2436
Pipe Flange

144792436
LN320-039DN150: RNCC: 2 | RNVC: 2

20 Dec 1995

4730-14-480-2160
Pipe To Tube Straight Adapter

144802160
U1-4A: RNCC: 3 | RNVC: 2

28 Feb 1996

4730-14-259-4978

4730-14-256-9245

4730-14-335-7107

4730-14-317-9900
Jeu Demi-Manchons

143179900
L40.GB.06: RNCC: 3 | RNVC: 2
L40GB06: RNCC: 5 | RNVC: 2

1 Jan 1975