What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 113 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 113 of 185

4730-14-308-1047

4730-14-497-6108
Tube To Boss Straight Adapter

144976108
4K8381: RNCC: 3 | RNVC: 2
F300 0T 023 4145: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-260-9293
Pipe Flange

142609293
7062DD1F1F57XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-490-1000
Tube To Boss Straight Adapter

144901000
SIPMAA1000400A: RNCC: 3 | RNVC: 2
SIMMAA1001000F5AREP5: RNCC: 5 | RNVC: 2

11 Sep 1997

4730-14-381-8454
Threaded Tube Fitting Plug

143818454
16763287: RNCC: 3 | RNVC: 2
16763287: RNCC: 5 | RNVC: 9

25 Jan 1983

4730-14-435-5593
Bulkhead Hose Connector

144355593
DA2C721750Z1: RNCC: 3 | RNVC: 2

8 Nov 1989

4730-14-430-6740
Tube Tee

144306740
PM1A596116110: RNCC: 3 | RNVC: 2
PM1A596116110: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-339-0660
Raccordement Bride

143390660
RK6154REP11ET12: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-449-6376
Mamelon

144496376
622386: RNCC: 3 | RNVC: 2

28 Aug 1991

4730-14-395-3670
Embout A Souder

143953670
N0189F20A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-422-6754
Tube Coupling

144226754
2-542578-5: RNCC: 3 | RNVC: 2
2-542578-5: RNCC: 5 | RNVC: 9

15 Mar 1988

4730-14-327-1059

4730-14-355-5710

4730-14-399-1248
Flange To Boss Elbow

143991248
5000804012: RNCC: 3 | RNVC: 2
5000804012: RNCC: 6 | RNVC: 9

6 Mar 1985

4730-14-494-5529
Tube To Boss Straight Adapter

144945529
643 461 163: RNCC: 3 | RNVC: 2
F300 0T 017 4708: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-278-8203
Tube Tee

142788203
10193AREP270: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-533-4754
Tube Tee

145334754
05F080: RNCC: 3 | RNVC: 2

5 Feb 2003

4730-14-562-7200
Fluid Pressure Line Multiple Connector

145627200
SWVE10LROMDCF: RNCC: 3 | RNVC: 2
SWVE10LROMDCF: RNCC: 5 | RNVC: 9

17 Nov 2009

4730-14-430-6222
Flange To Tube Straight Adapter

144306222
PM1A522139001: RNCC: 3 | RNVC: 2
PM1A522139001: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-222-2201
Fluid Pressure Line Multiple Connector

142222201
0000355365: RNCC: 3 | RNVC: 2
0000355365: RNCC: 5 | RNVC: 9
355365: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-424-6617
Quick Disconnect Coupling Half

144246617
5000267049: RNCC: 3 | RNVC: 2
N01215183: RNCC: 5 | RNVC: 2
89409906: RNCC: 5 | RNVC: 2

2 Jun 1988

4730-14-543-8803
Tube To Boss Straight Adapter

145438803
560503482: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-341-6578
Tube Coupling

143416578
186744: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-527-4053
Tube To Boss Straight Adapter

145274053
K102874: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-481-2204
Tube To Boss Straight Adapter

144812204
90 04 55: RNCC: 3 | RNVC: 2

25 Apr 1996

4730-14-553-1345
Tube Fitting Socket Welded Ferrule

145531345
0000311890: RNCC: 3 | RNVC: 2

6 Mar 2007

4730-14-503-1559
Swivel Flange To Hose Straight Adapter

145031559
C25157010: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-323-5706
Fluid Passage Bolt

143235706
A110336: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-349-3574
Fluid Passage Bolt

143493574
0000290600: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-495-7123
Tube To Boss Straight Adapter

144957123
109071X07008A: RNCC: 3 | RNVC: 9
F300 0T 019 7019: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-416-3086
Tube Tee

144163086
4730AJ4.1DN20NU: RNCC: 2 | RNVC: 2
MEC10826: RNCC: 3 | RNVC: 2
Q15T20SNU: RNCC: 3 | RNVC: 2
8404200066NU: RNCC: 5 | RNVC: 2

3 Jun 1987

4730-14-515-6870
Tube Tee

145156870
32DL10: RNCC: 3 | RNVC: 2
77719001A: RNCC: 5 | RNVC: 2
632100110: RNCC: 5 | RNVC: 2

23 Jul 1999

4730-14-238-6753
Pipeline Flexible Spacer

142386753
DILNH175MAR: RNCC: 3 | RNVC: 9
I131NH175MAR: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-324-5698

4730-14-433-3742
Tube Fitting Brazing Ferrule

144333742
DLT129313: RNCC: 3 | RNVC: 2
RAR1431: RNCC: 5 | RNVC: 2

24 Jul 1989

4730-14-500-2512
Tube To Boss Straight Adapter

145002512
377735X1: RNCC: 3 | RNVC: 2
F300 0T 024 2568: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-452-5634
Pipe Flange

144525634
LN320033F28DN125: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-572-7831
Quick Disconnect Plug

145727831
90MS019: RNCC: 3 | RNVC: 2

1 Aug 2012

4730-14-032-1681
Pipe Flange

140321681
CMT30E9002PL2B250: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-531-4412
Pipe Fitting Assortment

145314412
41146: RNCC: 3 | RNVC: 2

20 Aug 2002

4730-14-535-2053
Fluid Passage Bolt

145352053
5010412978: RNCC: 3 | RNVC: 2

14 May 2003

4730-14-415-5275
Tube To Boss Straight Adapter

144155275
466: RNCC: 3 | RNVC: 2

18 May 1987

4730-14-453-8854
Tube Tee

144538854
R1010Z16: RNCC: 3 | RNVC: 2
924568: RNCC: 5 | RNVC: 2
89472349: RNCC: 5 | RNVC: 2

12 Mar 1992

4730-14-523-6439
Lubrication Fitting

145236439
D45842: RNCC: 3 | RNVC: 2

31 Jan 2001

4730-14-335-9237
Tube To Boss Straight Adapter

143359237
GA70696: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-575-7458
Tube Coupling Nut

145757458
ABS0107T400: RNCC: 1 | RNVC: 2
ABS0107T400: RNCC: 3 | RNVC: 2
ABS0107T400: RNCC: 3 | RNVC: 2

29 Apr 2013

4730-14-252-2620

4730-14-566-3050
Air Line Manifold

145663050
00278354: RNCC: 3 | RNVC: 2
12920: RNCC: 5 | RNVC: 2

4 Nov 2010

4730-14-218-1813

4730-14-578-0972
Flange To Hose Elbow

145780972
0292720480: RNCC: 3 | RNVC: 2

30 Oct 2013

4730-14-262-2002

4730-14-576-2711
Pipe Flange

145762711
2070: RNCC: 3 | RNVC: 2

10 Jun 2013

4730-14-456-6469
Tube Tee

144566469
LN326064F8REP6: RNCC: 3 | RNVC: 2

16 Jul 1992

4730-14-445-1771
Tube Tee

144451771
551103: RNCC: 3 | RNVC: 2

4 Feb 1991

4730-14-573-0145
Tube Elbow

145730145
COUDE00089: RNCC: 3 | RNVC: 2

4 Sep 2012

4730-14-365-9640

4730-14-326-1204

4730-14-432-2792
Tube To Boss Straight Adapter

144322792
P4 12 06 12X100NU: RNCC: 3 | RNVC: 2
P4-12-6-12X100NU: RNCC: 5 | RNVC: 2

31 May 1989

4730-14-469-2652
Tube Tee

144692652
922006: RNCC: 3 | RNVC: 2
Q1-5T10S: RNCC: 5 | RNVC: 2

15 Apr 1994

4730-14-562-1838
Tube Nipple

145621838
3106 08 10: RNCC: 3 | RNVC: 2
FS0002459: RNCC: 6 | RNVC: 9

6 Oct 2009

4730-14-553-9060
Pipe Flange

145539060
355 027: RNCC: 3 | RNVC: 2
355 027: RNCC: 3 | RNVC: 2

29 May 2007

4730-14-515-3459
Fluid Flow Restrictor

145153459
6003454000: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-273-5363

4730-14-543-7983
Tube To Boss Straight Adapter

145437983
9320580: RNCC: 3 | RNVC: 2

10 Dec 2004

4730-14-325-8982
Pipe Flange

143258982
AS34TV103REP2: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-469-2824
Quick-Disconnect Nipple

144692824
820.1040.ST: RNCC: 3 | RNVC: 2
1087712A00: RNCC: 5 | RNVC: 2

18 Apr 1994

4730-14-446-9761
Tube Coupling Inverted Nut

144469761
F8E100055023020: RNCC: 3 | RNVC: 2

22 Apr 1991

4730-14-546-5272
Tube To Boss Straight Adapter

145465272
GE06LREDOMDCF: RNCC: 3 | RNVC: 9
5010596391: RNCC: 5 | RNVC: 2

18 Jul 2005

4730-14-339-1486
Tube To Boss Straight Adapter

143391486
RK6154REP15: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-311-6122
Fluid Passage Bolt

143116122
329052: RNCC: 3 | RNVC: 2
DBA329052: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-208-5468
Fluid Passage Bolt

142085468
0000128547: RNCC: 3 | RNVC: 2
0000128547: RNCC: 5 | RNVC: 9
128547: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-474-9400
Sediment Strainer Element

144749400
01004355A00040: RNCC: 3 | RNVC: 2
01004355A00040: RNCC: 3 | RNVC: 9
RAB3666: RNCC: 5 | RNVC: 2
04355A00040: RNCC: 5 | RNVC: 9

13 Mar 1995

4730-14-224-3883
Tube-Hose Fitting Compression Sleeve

142243883
R5040: RNCC: 3 | RNVC: 2
ARS5040: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-281-1946
Fluid Pressure Line Multiple Connector

142811946
109-4Z244: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-514-1911
Tube Coupling Nut Assembly

145141911
0-3751SB25A: RNCC: 3 | RNVC: 2
0-3751SB25A: RNCC: 5 | RNVC: 9

28 Apr 1999

4730-14-367-7760

4730-14-494-5497
Tube To Boss Straight Adapter

144945497
643 080 171: RNCC: 3 | RNVC: 2
F300 0T 017 4675: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-567-8401
Tube Nipple

145678401
0R/C28000056: RNCC: 3 | RNVC: 2

15 Apr 2011

4730-14-365-9351

4730-14-560-6131
Boss Elbow

145606131
10366449: RNCC: 3 | RNVC: 2

5 May 2009

4730-14-280-0558

4730-14-316-8947
Boite Arrivee Eau

143168947
SPL30864: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-356-6815

4730-14-353-7498
Tube Coupling Nut Assembly

143537498
E-JET14P: RNCC: 3 | RNVC: 2
EJET14P: RNCC: 5 | RNVC: 2
KEJET14P: RNCC: 5 | RNVC: 2
EJET14: RNCC: 5 | RNVC: 9

16 Jan 1979

4730-14-494-5532
Tube To Boss Straight Adapter

144945532
643 461 257: RNCC: 3 | RNVC: 2
F300 0T 017 4711: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-343-7574
Tube To Boss Straight Adapter

143437574
A80538: RNCC: 3 | RNVC: 2

13 Jul 1977

4730-14-401-3203
Tube Tee

144013203
S6XS14: RNCC: 3 | RNVC: 2

5 Jun 1985

4730-14-433-3753
Tube Fitting Brazing Ferrule

144333753
DLT589250: RNCC: 3 | RNVC: 2
DLT565670AREP25AFOLIO15-1/3: RNCC: 5 | RNVC: 2

24 Jul 1989

4730-14-379-2784
Tube-Hose Fitting Compression Sleeve

143792784
0550445: RNCC: 3 | RNVC: 2
1214 4526: RNCC: 5 | RNVC: 2

6 Sep 1982

4730-14-309-5730
Tube To Boss Straight Adapter

143095730
0080000620: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-446-9794
Bulkhead Hose Connector

144469794
3/8WGG44B: RNCC: 3 | RNVC: 2
3/8WGG44B: RNCC: 3 | RNVC: 9
MX3044A00: RNCC: 5 | RNVC: 2
WGG44B3/8: RNCC: 5 | RNVC: 9

22 Apr 1991

4730-14-401-3168
Tube To Boss Straight Adapter

144013168
F3XS12-1-4: RNCC: 3 | RNVC: 2

5 Jun 1985

4730-14-395-8873

4730-14-262-1462

4730-14-225-7968

4730-14-234-8464
Raccord Special

4730-14-464-5412
Tuyau Collier

4730-14-333-3093
Raccord Sur Parcour

143333093
AS34TV135F8A: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-338-0840
Tube Coupling Assembly

143380840
0-3801S40A: RNCC: 3 | RNVC: 2
0-3801S40A: RNCC: 5 | RNVC: 9

6 Nov 1976

4730-14-335-7135

4730-14-366-5930

4730-14-565-7835
Pipe To Tube Elbow

145657835
5005030348: RNCC: 1 | RNVC: 2
82309210: RNCC: 3 | RNVC: 2
25312104: RNCC: 5 | RNVC: 2

22 Sep 2010

4730-14-479-2764
Tube To Boss Straight Adapter

144792764
FTXS10-1/8: RNCC: 3 | RNVC: 2
FTXS10-1/8: RNCC: 3 | RNVC: 9

3 Jan 1996

4730-14-404-9442
Bulkhead Hose Connector

144049442
A15181-1: RNCC: 3 | RNVC: 2
A15181-1: RNCC: 5 | RNVC: 2

20 Nov 1985

4730-14-556-4483
Pipe Flange

145564483
2A 2 E EF 558300 001 2/5 DN38: RNCC: 3 | RNVC: 2

10 Mar 2008

4730-14-310-4071
Swivel Retaining Pipe Flange

143104071
87091: RNCC: 3 | RNVC: 2
87091: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-369-4449
Tube To Boss Straight Adapter

143694449
PRCCM5: RNCC: 3 | RNVC: 9

17 Apr 1981

4730-14-553-4795
Flange To Boss Elbow

145534795
0000371210: RNCC: 3 | RNVC: 2

5 Apr 2007

4730-14-230-7121
Pipe Flange

142307121
GSM1947REP18MALE: RNCC: 3 | RNVC: 2
GSM1947DET18MALE: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-505-6584
Tube Coupling

145056584
E25001000290: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-298-9571
Tube To Boss Straight Adapter

142989571
000557282P: RNCC: 3 | RNVC: 2
0UT1-128: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-468-6401
Tube To Boss Straight Adapter

144686401
008686035P: RNCC: 3 | RNVC: 2

15 Mar 1994

4730-14-230-7106
Pipe Flange

142307106
GSM1947REP3MALE: RNCC: 3 | RNVC: 2
GSM1947DET3MALE: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-363-8711
Fluid Pressure Line Multiple Connector

143638711
190200: RNCC: 3 | RNVC: 2

7 Aug 1980

4730-14-508-0435
Return Tube Bend

145080435
0248283: RNCC: 3 | RNVC: 2

26 Aug 1998

4730-14-514-8015
Fluid Pressure Line Multiple Connector

145148015
01180410: RNCC: 3 | RNVC: 2

16 Jun 1999

4730-14-512-8415
Tube Coupling

145128415
217095: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-325-6778
Bulkhead Hose Connector

143256778
0000364390: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-419-9263
Reducing Tube Coupling Nut

144199263
44732040000: RNCC: 3 | RNVC: 2
22432: RNCC: 5 | RNVC: 2
HOL44732040000: RNCC: 5 | RNVC: 9

10 Nov 1987

4730-14-214-6371
Tube Tee

142146371
F541AGL: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-325-6782
Bulkhead Hose Connector

143256782
0000364430: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-496-3994
Tube To Boss Straight Adapter

144963994
198056: RNCC: 3 | RNVC: 2
F300 0T 021 4875: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-535-8785
Fluid Pressure Line Multiple Connector

145358785
E190074: RNCC: 3 | RNVC: 2
SYQ2824: RNCC: 5 | RNVC: 2

25 Jun 2003

4730-14-539-5321
Tube To Boss Straight Adapter

145395321
21 172HL710 06L: RNCC: 3 | RNVC: 2

22 Jan 2004

4730-14-508-8348
Hydraulic System Accessories Manifold

145088348
1200127: RNCC: 3 | RNVC: 2
1146F5B: RNCC: 5 | RNVC: 2

30 Sep 1998

4730-14-508-9027
Tube Union

145089027
K110845B: RNCC: 3 | RNVC: 2

7 Oct 1998

4730-14-390-7196
Vidange Raccord Uni

143907196
226416: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-351-1663
Tube To Boss Straight Adapter

143511663
008821492: RNCC: 3 | RNVC: 9

10 Aug 1978

4730-14-526-5000
Hose Flange Socket Assembly

145265000
D66121: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-496-3948
Tube To Boss Straight Adapter

144963948
195900: RNCC: 3 | RNVC: 2
F300 0T 021 4829: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-332-4667
Tube Tee

143324667
TEREDUIT4X3INXC18: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-518-3431
Tube Tee

145183431
HTEXX000009: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-510-7604
Tube To Boss Straight Adapter

145107604
742VN06: RNCC: 3 | RNVC: 2
742 VN 06: RNCC: 3 | RNVC: 2
742VN06: RNCC: 5 | RNVC: 2

10 Nov 1998

4730-14-547-6293
Pipeline Flexible Spacer

145476293
H0120025: RNCC: 3 | RNVC: 2

19 Oct 2005

4730-14-419-5891
Tube Tee

144195891
32A12: RNCC: 3 | RNVC: 2

21 Oct 1987

4730-14-478-7026
Filler Cap Adapter Assembly

144787026
1CM1027C-REP25A28: RNCC: 3 | RNVC: 2

17 Nov 1995

4730-14-525-7926
Tube To Boss Straight Adapter

145257926
F145346: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-340-8947

4730-14-564-6193
Hose Clamp

145646193
OE100220: RNCC: 3 | RNVC: 2

12 May 2010

4730-14-245-8383
Bouchon Filete Spec

142458383
E160E358B0UCH0N: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-561-7999
Tube Union

145617999
F8UNPMB8M14: RNCC: 3 | RNVC: 2
F8UNPMB8M14: RNCC: 5 | RNVC: 9

8 Sep 2009

4730-14-379-1369
Self-Sealing Coupling Half

143791369
1-07-430-1: RNCC: 3 | RNVC: 2

6 Sep 1982

4730-14-488-9877
Tube To Boss Straight Adapter

144889877
00 114 G21 08 B: RNCC: 3 | RNVC: 2
4738-G21-08: RNCC: 5 | RNVC: 9

18 Jun 1997

4730-14-502-7774
Raccord

145027774
6V9649: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-367-7915

4730-14-374-8725

4730-14-236-5992

4730-14-360-6867
Reducteur Pour Tube

4730-14-222-2712

4730-14-445-3622
Tube Union

144453622
233479G: RNCC: 3 | RNVC: 2

11 Feb 1991

4730-14-230-4987

4730-14-230-7126
Pipe Flange

142307126
GSM1947REP1FEMELLE: RNCC: 3 | RNVC: 2
GSM1947DET1FEMELLE: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-295-0992
Tube To Boss Straight Adapter

142950992
273951: RNCC: 3 | RNVC: 2
273951: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-226-8288
Tube Tee

142268288
R12X10X12S: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-230-6084
Fluid Pressure Line Multiple Connector

142306084
1074S: RNCC: 3 | RNVC: 9
1593P: RNCC: 5 | RNVC: 9
1074: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-040-4053
Tube Tee

140404053
120085: RNCC: 3 | RNVC: 2
R10LX6X10: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-376-3547
Pipe Flange

143763547
065-30-9013PL2DN65: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-503-0232
Quick Disconnect Coupling Half

145030232
GP01536: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-309-5572
Tube To Boss Straight Adapter

143095572
0000240750: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-456-6457
Tube Tee

144566457
LN326064F7REP2: RNCC: 3 | RNVC: 2

16 Jul 1992

4730-14-460-6692
Tube-Hose Fitting Compression Sleeve

144606692
OLIVE.1536.EMMCAT.CR.MARION.: RNCC: 3 | RNVC: 2

4 Feb 1993

4730-14-340-5667
Tube Fitting Socket Welded Ferrule

143405667
21559: RNCC: 3 | RNVC: 2
21559: RNCC: 5 | RNVC: 9

14 Feb 1977

4730-14-503-2071
Tube Coupling

145032071
RP1A504232080: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-230-7112
Pipe Flange

142307112
GSM1947REP9MALE: RNCC: 3 | RNVC: 2
GSM1947DET9MALE: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-528-3314
Quick-Disconnect Nipple

145283314
21 626 013: RNCC: 3 | RNVC: 2

22 Jan 2002

4730-14-496-3803
Tube To Boss Straight Adapter

144963803
190611: RNCC: 3 | RNVC: 2
F300 0T 021 4681: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-470-5359
Tube To Boss Straight Adapter

144705359
153.O6C: RNCC: 3 | RNVC: 2
89486719: RNCC: 5 | RNVC: 2

22 Jun 1994

4730-14-492-3313
Hose To Boss Straight Adapter

144923313
5000044556: RNCC: 3 | RNVC: 2
F300 0T 007 4066: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-487-5451
Bulkhead Hose Connector

144875451
RA1M521404170: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-306-4128
Fluid Pressure Line Multiple Connector

143064128
MAA70181: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-375-4176
Fluid Pressure Line Multiple Connector

143754176
D48571: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-323-5704
Tube To Boss Straight Adapter

143235704
001082282P: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-516-7428
Tube To Boss Straight Adapter

145167428
Y00005943: RNCC: 3 | RNVC: 2
5101083: RNCC: 3 | RNVC: 2
Y00005943: RNCC: 5 | RNVC: 9

13 Oct 1999

4730-14-500-4705
Tube To Boss Straight Adapter

145004705
670164076: RNCC: 3 | RNVC: 2
PUR670164076: RNCC: 5 | RNVC: 9
F300 0T 024 4874: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-409-6309
Bulkhead Hose Connector

144096309
DA1D203535511: RNCC: 3 | RNVC: 2

28 May 1986

4730-14-493-0608
Tube To Boss Straight Adapter

144930608
3565545MI: RNCC: 3 | RNVC: 2
F300 0T 009 7803: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-355-8970
Tube To Boss Straight Adapter

143558970
216501: RNCC: 3 | RNVC: 2

5 Apr 1979

4730-14-305-2216

4730-14-334-2641

4730-14-569-2531
Self-Sealing Coupling Assembly

145692531
N00337411: RNCC: 3 | RNVC: 2

29 Aug 2011

4730-14-270-5153

4730-14-262-9553
Demi Collier

142629553
DLT005109: RNCC: 3 | RNVC: 2
DLT005109: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-262-1767

4730-14-353-8962

4730-14-523-2052
Hose Coupling Assembly

145232052
DA2C729003200: RNCC: 3 | RNVC: 2

10 Jan 2001

4730-14-230-7119
Pipe Flange

142307119
GSM1947REP16MALE: RNCC: 3 | RNVC: 2
GSM1947DET16MALE: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-426-7876
Tube Tee

144267876
4730HEING114,3X5,6-60,3X2,9: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-545-3359
Quick Disconnect Coupling Half

145453359
1CBD7-3: RNCC: 3 | RNVC: 2

5 Apr 2005

4730-14-430-8219
Equipe Raccord

144308219
311471-1: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-513-9006
Quick Disconnect Coupling Half

145139006
R430013: RNCC: 3 | RNVC: 2

14 Apr 1999

4730-14-526-5297
Tube To Boss Straight Adapter

145265297
310212A: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-380-1075

4730-14-386-4279
Tube To Boss Straight Adapter

143864279
23S10020: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-516-3904
Tube To Boss Straight Adapter

145163904
206132: RNCC: 3 | RNVC: 2

22 Sep 1999

4730-14-524-1120
Pipeline Flexible Spacer

145241120
MX66DN900PN10L400+2AMAR: RNCC: 3 | RNVC: 2

1 Mar 2001

4730-14-362-1267
Tube To Boss Straight Adapter

143621267
26145050300: RNCC: 3 | RNVC: 2
261450503: RNCC: 5 | RNVC: 9

20 Feb 1980

4730-14-240-7051

4730-14-402-0091
Fluid Pressure Line Multiple Connector

144020091
272221: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-489-5340
Fluid Pressure Line Multiple Connector

144895340
20620606: RNCC: 3 | RNVC: 2

30 Jul 1997

4730-14-448-7841
Echangeur Buse

144487841
721B902: RNCC: 3 | RNVC: 2
89469817: RNCC: 5 | RNVC: 2

10 Jul 1991

4730-14-455-9409
Bulkhead Hose Connector

144559409
PM1A756129001: RNCC: 3 | RNVC: 2
PM1A756129001: RNCC: 5 | RNVC: 2

11 Jun 1992

4730-14-453-0950
Special-Shaped Hose Clamp

144530950
CV077: RNCC: 3 | RNVC: 2

4 Feb 1992

4730-14-450-3731
Pipe Expansion Joint

144503731
PC30850: RNCC: 3 | RNVC: 2

1 Oct 1991

4730-14-323-9220
Pipe Flange

143239220
7062TD1F1F171UE12: RNCC: 2 | RNVC: 2
MEC10326: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-395-3701
Tube To Boss Straight Adapter

143953701
N0117F23B: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-452-7497
Hose To Gas Fitting Straight Adapter

144527497
2001160001: RNCC: 3 | RNVC: 2
89476103: RNCC: 5 | RNVC: 2

15 Jan 1992

4730-14-405-5842
Tube Coupling

144055842
M4Z7101919120: RNCC: 3 | RNVC: 2

4 Dec 1985

4730-14-402-1050
Pipe Flange

144021050
400886: RNCC: 3 | RNVC: 2
BGE400886: RNCC: 5 | RNVC: 2

26 Jun 1985

4730-14-525-7910
Tube To Boss Straight Adapter

145257910
F145319: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-396-9384
Pipe Flange

143969384
438157A: RNCC: 3 | RNVC: 2
438157: RNCC: 5 | RNVC: 2

27 Nov 1984

4730-14-505-5809
Sediment Strainer Element

145055809
60960: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-450-4409
Pipe Flange

144504409
4730HBPN16DN050: RNCC: 2 | RNVC: 2

9 Oct 1991

4730-14-273-8863
Quick Disconnect Coupling Half

142738863
6702F4B14RACC0RD65: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-254-7115
Sediment Strainer Element

142547115
B2712: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-575-7725
Flange To Tube Elbow

145757725
M2811343800000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-493-0001
Graisseur

144930001
4046 822 253 644: RNCC: 3 | RNVC: 2
F300 0T 009 4312: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-452-5595
Pipe Flange

144525595
LN320033F27DN20: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-218-8697

4730-14-515-2673
Tube To Boss Straight Adapter

145152673
9721000008: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-335-5054
Fluid Pressure Line Multiple Connector

143355054
F10A740015: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-349-3742
Fluid Passage Bolt

143493742
1341027: RNCC: 3 | RNVC: 2
1341027: RNCC: 5 | RNVC: 2

22 May 1978

4730-14-217-3560
Tube Coupling Assembly

142173560
3601H63A: RNCC: 3 | RNVC: 2
3601H63A: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-328-2611
Pipe Flange

143282611
ZA29C8UR: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-552-1110
Straight Tubing Connector

145521110
0000380470: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-435-2152
Tube Tee

144352152
4M10F870XS: RNCC: 3 | RNVC: 2
5929951: RNCC: 5 | RNVC: 2

30 Oct 1989

4730-14-503-2562
Flange To Hose Elbow

145032562
0301521300: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-398-0409
Fluid Passage Bolt

143980409
616556: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-504-0586
Tube Coupling

145040586
NNP4730878750133: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-494-5505
Tube To Boss Straight Adapter

144945505
643 445 103: RNCC: 3 | RNVC: 2
F300 0T 017 4683: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-347-3884
Fluid Passage Bolt

143473884
12140252: RNCC: 3 | RNVC: 2
12014A: RNCC: 5 | RNVC: 2
5000991212: RNCC: 5 | RNVC: 2

1 Mar 1978

4730-14-226-4220
Tube To Boss Straight Adapter

142264220
0039900: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-273-3298
Sediment Strainer Element

142733298
122205INOX50MICRONS: RNCC: 3 | RNVC: 9
300122205IN0X50MICR0NS: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-501-1382
Fluid Pressure Line Multiple Connector

145011382
0111 0725: RNCC: 3 | RNVC: 2
F300 0T 025 1784: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-366-5159
Fluid Passage Bolt

143665159
069-11-172: RNCC: 3 | RNVC: 2

20 Nov 1980

4730-14-504-0800
Tube Coupling

145040800
NNP4730878750384: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-419-7835
Tube To Boss Straight Adapter

144197835
160H712204-161: RNCC: 3 | RNVC: 2

5 Nov 1987

4730-14-539-4380
Quick Disconnect Coupling Half

145394380
69251112: RNCC: 3 | RNVC: 2

14 Jan 2004

4730-14-518-1151
Tube Tee

145181151
5000673197: RNCC: 3 | RNVC: 2

26 Jan 2000

4730-14-540-9887
Tube-Hose Fitting Compression Sleeve

145409887
PMEM50V14: RNCC: 3 | RNVC: 2

5 May 2004

4730-14-542-9637
Hose To Gas Fitting Straight Adapter

145429637
864010: RNCC: 3 | RNVC: 2

14 Aug 2004

4730-14-032-1579
Pipe Flange

140321579
CMT30E9030AF5ET6DE20REP2: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-501-1369
Fluid Pressure Line Multiple Connector

145011369
0110 2194: RNCC: 3 | RNVC: 2
F300 0T 025 1771: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-525-2684
Drain Extension Tube

145252684
10528016: RNCC: 3 | RNVC: 2

23 May 2001

4730-14-239-4998
Tamis Filtre A Sedi

142394998
0176-526155: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-565-4230
Tube Outlet

145654230
MDS81P015: RNCC: 3 | RNVC: 2

17 Aug 2010

4730-14-452-9161
Fluid Passage Bolt

144529161
27210720V: RNCC: 3 | RNVC: 2

28 Jan 1992

4730-14-496-4117
Graisseur Dr

144964117
199961: RNCC: 3 | RNVC: 2
F300 0T 021 5018: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-542-7087
Tube Coupling

145427087
516092038: RNCC: 3 | RNVC: 2

28 Jul 2004

4730-14-286-3363
Tube To Boss Straight Adapter

142863363
L65DAN9032M6P1: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-305-4545
Fluid Pressure Line Multiple Connector

143054545
103089004301: RNCC: 3 | RNVC: 2
103089004301: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-438-7555
Hose To Boss Straight Adapter

144387555
TB2010611: RNCC: 3 | RNVC: 2

4 Apr 1990

4730-14-365-2846

4730-14-225-5253
Bride Speciale

142255253
DLT012195: RNCC: 3 | RNVC: 2
DL12195: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-578-4293
Tube To Boss Straight Adapter

145784293
DE9RA1620: RNCC: 3 | RNVC: 2
3389110062038: RNCC: 5 | RNVC: 2

28 Nov 2013

4730-14-275-2762

4730-14-225-3876

4730-14-240-6408
Embout Tube Ensembl

142406408
1121AS: RNCC: 3 | RNVC: 9
1121A: RNCC: 5 | RNVC: 9
1000800P: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-264-9192

4730-14-409-1093
Tube To Gas Fitting Straight Adapter

144091093
621478: RNCC: 3 | RNVC: 2

16 Apr 1986

4730-14-522-6216
Quick Disconnect Plug

145226216
021298: RNCC: 3 | RNVC: 2
1595.41925C: RNCC: 3 | RNVC: 2
21298: RNCC: 5 | RNVC: 2
021298: RNCC: 5 | RNVC: 9

8 Nov 2000

4730-14-304-8694
Fluid Pressure Line Multiple Connector

143048694
R33685SMREP2A5: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-528-3255
Flexible Tube Coupling Assembly

145283255
ES12A22MX30A: RNCC: 3 | RNVC: 2

22 Jan 2002

4730-14-433-2256
Tube To Boss Straight Adapter

144332256
GE10PLMEDA3C: RNCC: 3 | RNVC: 2
GE10PLMEDA3C: RNCC: 3 | RNVC: 9
104981: RNCC: 5 | RNVC: 2
GE10PLMEDA3C: RNCC: 5 | RNVC: 2
427338: RNCC: 5 | RNVC: 2

18 Jul 1989

4730-14-356-3042
Quick Disconnect Coupling Half

143563042
STH00841: RNCC: 3 | RNVC: 2
STH00841: RNCC: 5 | RNVC: 2

25 Apr 1979

4730-14-400-9514
Bulkhead Hose Connector

144009514
DA2C203535411U1: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-539-7186
Tube Coupling Assembly

145397186
AW01ARN13: RNCC: 3 | RNVC: 2

4 Feb 2004

4730-14-503-2044
Tube Coupling

145032044
RA1M504225082: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-558-2589
Suction Strainer

145582589
TP526087: RNCC: 1 | RNVC: 2
404C9-1: RNCC: 3 | RNVC: 2

16 Sep 2008

4730-14-451-2643
Tuyauterie Fixation

144512643
M20H723007B1: RNCC: 3 | RNVC: 2

6 Nov 1991

4730-14-347-8144

4730-14-350-1815

4730-14-224-0860

4730-14-564-3616
Tube Coupling

145643616
S06060058D: RNCC: 3 | RNVC: 2

26 Apr 2010

4730-14-308-1048

4730-14-474-1271
Purge Adaptateur

4730-14-321-7620

4730-14-408-8667
Tube To Boss Straight Adapter

144088667
8401222147: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-322-9317

4730-14-365-3455

4730-14-297-3810
Tube To Boss Straight Adapter

142973810
15435185: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-514-2981
Tube Coupling

145142981
5460511: RNCC: 3 | RNVC: 2

7 May 1999

4730-14-389-1328
Tube Tee

143891328
R10X20X20: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-295-0272
Bride A Zinc

142950272
AS34TV108AREP21: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-396-9242
Sediment Strainer Element

143969242
N80: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-338-2506
Tube Fitting Brazing Ferrule

143382506
CN60: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-432-3056
Tube Coupling

144323056
A4H13984: RNCC: 3 | RNVC: 2

2 Jun 1989

4730-14-538-8157
Tube Coupling Assembly

145388157
NGM0011042651199: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-325-6444
Fluid Pressure Line Multiple Connector

143256444
121S77-123-00-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-383-7640
Tube Tee

143837640
GARD721468: RNCC: 3 | RNVC: 2

11 Apr 1983

4730-14-472-2365
Fluid Pressure Line Multiple Connector

144722365
7700519230: RNCC: 3 | RNVC: 2
89470881: RNCC: 5 | RNVC: 2

12 Oct 1994

4730-14-293-9178
Pipe Flange

142939178
R32488BSM1DET1PERCAGEGSM1487F: RNCC: 3 | RNVC: 9

1 Jan 1973

4730-14-504-6181
Tube To Gas Fitting Straight Adapter

145046181
01201017: RNCC: 3 | RNVC: 2

25 Feb 1998

4730-14-494-5367
Tube To Boss Straight Adapter

144945367
602 827 48: RNCC: 3 | RNVC: 2
F300 0T 017 4540: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-562-7012
Tube Fitting Insert

145627012
1001 21201: RNCC: 3 | RNVC: 2

16 Nov 2009

4730-14-537-1430
Pipe Clamp Coupling

145371430
MR2086067001220: RNCC: 3 | RNVC: 2

2 Oct 2003

4730-14-530-7600
Pipe To Hose Straight Adapter

145307600
839127010: RNCC: 3 | RNVC: 2

3 Jul 2002

4730-14-332-8319
Tube Tee

143328319
1TR20X20X14NN: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-543-8601
Tube To Boss Straight Adapter

145438601
560503325: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-331-5813
Tube Tee

143315813
01040800: RNCC: 3 | RNVC: 2
91439963: RNCC: 5 | RNVC: 2
1040800: RNCC: 5 | RNVC: 2
439-846: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-550-9644
Tube Union

145509644
N40F: RNCC: 3 | RNVC: 2

3 Aug 2006

4730-14-279-0546

4730-14-262-3056
Raccord

142623056
A73204: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-215-2417
Raccord Special

142152417
0EM22343: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-267-8333

4730-14-260-9283
Pipe Flange

142609283
7062DD1F1M36XC18: RNCC: 2 | RNVC: 2
MEC10333: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-353-8176
Tube To Boss Straight Adapter

143538176
1404-1664: RNCC: 3 | RNVC: 2

16 Jan 1979

4730-14-418-0160
Pipe Flange

144180160
2500132: RNCC: 3 | RNVC: 2

6 Aug 1987

4730-14-420-6261
Quick Disconnect Coupling Half

144206261
E29572B65DE: RNCC: 2 | RNVC: 2
1020-540: RNCC: 3 | RNVC: 2
01106676: RNCC: 5 | RNVC: 9

16 Dec 1987

4730-14-515-4393
Tube To Boss Straight Adapter

145154393
90FJ12MJ12: RNCC: 3 | RNVC: 2
SOA90FJ12MJ12: RNCC: 5 | RNVC: 9

13 Jul 1999

4730-14-562-4905
Tube Coupling Assembly

145624905
0R/C28016256: RNCC: 3 | RNVC: 2

29 Oct 2009

4730-14-232-9051
Raccord Droit De Bo

142329051
0249150870: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-568-9776
Tube Tee

145689776
TS22: RNCC: 3 | RNVC: 2

25 Jul 2011

4730-14-563-3261
Quick Disconnect Coupling Half

145633261
RGMG040: RNCC: 3 | RNVC: 2
101583: RNCC: 5 | RNVC: 2

26 Jan 2010

4730-14-031-1137
Tube To Boss Straight Adapter

140311137
2020B: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-371-0480
Tube To Boss Straight Adapter

143710480
84051421: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-518-8106
Tube Coupling

145188106
980753: RNCC: 3 | RNVC: 2
980753: RNCC: 5 | RNVC: 2

21 Feb 2000

4730-14-517-5353
Fluid Passage Bolt

145175353
1106069D00: RNCC: 3 | RNVC: 2

5 Jan 2000

4730-14-571-5235
Fluid-Emulsion Spray Nozzle

145715235
PFW1140B3: RNCC: 3 | RNVC: 2

3 Apr 2012

4730-14-419-4341
Pipe Flange

144194341
B3051FS013F11A: RNCC: 3 | RNVC: 2

19 Oct 1987

4730-14-365-2888

4730-14-298-8843

4730-14-212-5444

4730-14-560-2977
Boss Outlet

145602977
10626132: RNCC: 3 | RNVC: 2

8 Apr 2009

4730-14-505-0710
Fluid Pressure Line Multiple Connector

145050710
FIP1: RNCC: 3 | RNVC: 2

11 Mar 1998

4730-14-536-0446
Bulkhead Hose Connector

145360446
PE65001E10: RNCC: 3 | RNVC: 2
A040A10: RNCC: 5 | RNVC: 2

9 Jul 2003

4730-14-542-2875
Tube Tee

145422875
971342608: RNCC: 3 | RNVC: 2
971342608: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-349-0897
Tube To Boss Straight Adapter

143490897
3051463: RNCC: 3 | RNVC: 2

19 Apr 1978

4730-14-325-6780
Bulkhead Hose Connector

143256780
0000364410: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-484-5214
Tube Tee

144845214
234432: RNCC: 3 | RNVC: 2

21 Nov 1996

4730-14-327-4443

4730-14-324-5695

4730-14-346-7390

4730-14-569-0776
Sediment Strainer Element

145690776
724372: RNCC: 3 | RNVC: 2

4 Aug 2011

4730-14-390-0581
Tu Droit Adaptateur

4730-14-278-8183
Tube Tee

142788183
1019AREP243: RNCC: 3 | RNVC: 2

11 Oct 2000

4730-14-526-2115
Tube Tee

145262115
01235016: RNCC: 3 | RNVC: 2

11 Jul 2001

4730-14-222-2738

4730-14-206-1004

4730-14-557-6066
Tube Tee

145576066
EVL20SOMDCF: RNCC: 3 | RNVC: 2

26 Jun 2008

4730-14-234-1261

4730-14-505-1378
Water Distribution Nozzle

145051378
310062A00343: RNCC: 3 | RNVC: 2

11 Mar 1998

4730-14-391-3741
Fluid Pressure Line Multiple Connector

143913741
761500113: RNCC: 3 | RNVC: 2

1 Mar 1984

4730-14-496-4710
Fluid Passage Bolt

144964710
475981: RNCC: 3 | RNVC: 2
F300 0T 021 5662: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-440-4123
Fluid Passage Bolt

144404123
18812: RNCC: 3 | RNVC: 2
18812: RNCC: 5 | RNVC: 9

11 Jul 1990

4730-14-382-3946
Fluid Pressure Line Multiple Connector

143823946
BAZ92150: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-308-6457
Pipe Flange

143086457
0235020080: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-428-5048
Fluid Passage Bolt

144285048
P430B25: RNCC: 3 | RNVC: 2
730.B.25: RNCC: 3 | RNVC: 2
730 B 25: RNCC: 5 | RNVC: 2
74730B25: RNCC: 5 | RNVC: 2
74730B25: RNCC: 5 | RNVC: 2
730B25: RNCC: 5 | RNVC: 2
164808: RNCC: 5 | RNVC: 2

8 Dec 1988

4730-14-462-3568
Fluid Pressure Line Multiple Connector

144623568
74000: RNCC: 3 | RNVC: 2
144349: RNCC: 5 | RNVC: 2

15 Apr 1993

4730-14-449-2214
Tube Fitting Clinch Sleeve

144492214
5005030156: RNCC: 3 | RNVC: 2

7 Aug 1991

4730-14-457-1290
Tube Union

144571290
METALGRIP 88.9 EPDM 16 BAR INOX: RNCC: 3 | RNVC: 2
1800881: RNCC: 5 | RNVC: 2

11 Aug 1992

4730-14-414-6607
Racco Embout Filete

144146607
4730HK-EMF33,7: RNCC: 2 | RNVC: 2

20 Feb 1987

4730-14-353-7502
Anemo Raccord Multi

143537502
A11B221278021A1: RNCC: 3 | RNVC: 2

16 Jan 1979

4730-14-257-2448

4730-14-361-0354

4730-14-376-3528
Tube To Boss Straight Adapter

143763528
7-4-55REPY: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-398-9731
Fluid Pressure Line Multiple Connector

143989731
VDP4519-1: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-545-8696
Air Hose Connector

145458696
O112135: RNCC: 3 | RNVC: 2

23 May 2005

4730-14-388-5611
Fluid Pressure Line Multiple Connector

143885611
0000302600: RNCC: 3 | RNVC: 2

3 Nov 1983

4730-14-421-6568
Lubrication Fitting Adapter

144216568
0301537230: RNCC: 3 | RNVC: 2

25 Jan 1988

4730-14-501-1120
Fluid Passage Bolt

145011120
1901012: RNCC: 3 | RNVC: 2
F300 0T 025 1513: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-213-5821
Tube Coupling Assembly

142135821
3801S50A: RNCC: 3 | RNVC: 2
3801S50A: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-405-0703
Tube Fitting Brazing Ferrule

144050703
270CU42: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-502-8345
Lubrication Fitting

145028345
9R3171: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-528-3661
Tube Tee

145283661
6JLOSS: RNCC: 3 | RNVC: 2

23 Jan 2002

4730-14-436-7058
Bulkhead Hose Connector

144367058
DA2C203513911: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-538-2989
Tube Coupling Assembly

145382989
NGM0010034103547: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-439-8849
Flange To Boss Straight Adapter

144398849
000034263: RNCC: 3 | RNVC: 2

30 May 1990

4730-14-504-7118
Tube To Boss Straight Adapter

145047118
31500699: RNCC: 3 | RNVC: 2
5005330100: RNCC: 5 | RNVC: 2

27 Feb 1998

4730-14-525-5035
Pipe Flange

145255035
A88140254: RNCC: 3 | RNVC: 2
E88140254: RNCC: 5 | RNVC: 9
V88140254: RNCC: 5 | RNVC: 9

6 Jun 2001

4730-14-546-5234
Tube Coupling

145465234
N00935304: RNCC: 3 | RNVC: 2

14 Jul 2005

4730-14-549-0675
Flange To Tube Straight Adapter

145490675
RA1M534803271A1: RNCC: 3 | RNVC: 2

2 Mar 2006

4730-14-513-8447
Tube To Boss Straight Adapter

145138447
322712: RNCC: 3 | RNVC: 2

14 Apr 1999

4730-14-488-7000
Tube-Hose Fitting Compression Sleeve

144887000
93580110: RNCC: 3 | RNVC: 2

28 May 1997

4730-14-416-5746
Tube Fitting Brazing Ferrule

144165746
4730GF-DN108I108: RNCC: 2 | RNVC: 2
4730GF-DN108I108: RNCC: 5 | RNVC: 2

18 Jun 1987

4730-14-309-5676
Fluid Passage Bolt

143095676
0000280310: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-576-1860
Flange To Tube Straight Adapter

145761860
M2821352020000: RNCC: 3 | RNVC: 2

4 Jun 2013

4730-14-307-8505

4730-14-552-6187
Quick Disconnect Plug

145526187
Z2738: RNCC: 3 | RNVC: 2

18 Jan 2007

4730-14-348-9857

4730-14-423-7400
Sediment Strainer Element

144237400
2320730320: RNCC: 3 | RNVC: 2

28 Apr 1988

4730-14-260-9268

4730-14-562-9297
Flange To Tube Tee

145629297
RA1A225155151: RNCC: 3 | RNVC: 2

7 Dec 2009

4730-14-205-0407

4730-14-279-0520

4730-14-405-3873
Quick-Disconnect Nipple

144053873
48050292: RNCC: 3 | RNVC: 2
48058F: RNCC: 5 | RNVC: 2
4805029200: RNCC: 5 | RNVC: 9
48050292: RNCC: 5 | RNVC: 9
48058F: RNCC: 5 | RNVC: 9
91676348: RNCC: 5 | RNVC: 9

27 Nov 1985

4730-14-318-8659
Pipe Flange

143188659
0000142164: RNCC: 3 | RNVC: 2
142164: RNCC: 5 | RNVC: 9
0000142164: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-488-4195
Tube To Boss Straight Adapter

144884195
59643-7: RNCC: 3 | RNVC: 2

7 May 1997

4730-14-356-2195
Tube To Boss Straight Adapter

143562195
70120073: RNCC: 3 | RNVC: 2
70120073: RNCC: 5 | RNVC: 9

25 Apr 1979

4730-14-362-8813
Quick Disconnect Plug

143628813
HD 05112 00: RNCC: 3 | RNVC: 2
HD0511200: RNCC: 5 | RNVC: 2
5112: RNCC: 5 | RNVC: 2

19 Mar 1980

4730-14-331-7353
Tube Fitting Flared Sleeve

143317353
17543: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-402-0886
Fluid Pressure Line Multiple Connector

144020886
404008: RNCC: 3 | RNVC: 2
BGE404008: RNCC: 5 | RNVC: 2

26 Jun 1985

4730-14-472-4337
Self-Sealing Coupling Half

144724337
1800A: RNCC: 3 | RNVC: 2

25 Oct 1994

4730-14-307-0633
Tube To Boss Straight Adapter

143070633
328053: RNCC: 3 | RNVC: 2
14966: RNCC: 5 | RNVC: 2
DBA328053: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-507-0242
Quick Disconnect Coupling Half

145070242
4266: RNCC: 3 | RNVC: 2
368581: RNCC: 5 | RNVC: 2

3 Jun 1998

4730-14-505-5814
Tube To Boss Straight Adapter

145055814
A93020: RNCC: 3 | RNVC: 2
CAE01610: RNCC: 5 | RNVC: 2

26 Mar 1998

4730-14-444-9946
Tube Tee

144449946
JRAB10: RNCC: 3 | RNVC: 2

30 Jan 1991

4730-14-481-2196
Tube To Boss Straight Adapter

144812196
35 58 06: RNCC: 3 | RNVC: 2

25 Apr 1996

4730-14-536-0472
Tube To Hose Straight Adapter

145360472
PE65407E08: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-230-5713

4730-14-365-3446

4730-14-378-6493

4730-14-333-1196
Tube Demi-Coquille

143331196
2264301190: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-564-5234
Tube To Boss Straight Adapter

145645234
A231004000405: RNCC: 3 | RNVC: 2
217EB055: RNCC: 5 | RNVC: 2

4 May 2010

4730-14-263-6404

4730-14-554-0990
Pipe Flange

145540990
604 113: RNCC: 3 | RNVC: 2
604 113: RNCC: 3 | RNVC: 2

11 Jun 2007

4730-14-350-6027
Tube To Boss Straight Adapter

143506027
100-378: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-470-5196
Tube Coupling

144705196
525 1014: RNCC: 3 | RNVC: 2
1067352L00: RNCC: 5 | RNVC: 2

22 Jun 1994

4730-14-405-5588
Tube To Boss Straight Adapter

144055588
01051821: RNCC: 3 | RNVC: 2

3 Dec 1985

4730-14-513-2940
Pipe Flange

145132940
020809120065: RNCC: 3 | RNVC: 2

10 Mar 1999

Load More Results