What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 112 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 112 of 185

4730-14-567-0572
Tube To Boss Swivel Joint

145670572
706A34424015: RNCC: 1 | RNVC: 2
6A27-FG-20-K: RNCC: 3 | RNVC: 2

2 Feb 2011

4730-14-575-7991
Fluid Passage Bolt

145757991
0235237950: RNCC: 3 | RNVC: 2

2 May 2013

4730-14-032-1555
Pipe Flange

140321555
CMT30E9030AF3ET3BISDE38REP3: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-483-7262
Tube Coupling

144837262
0300310710: RNCC: 3 | RNVC: 2

27 Sep 1996

4730-14-254-0555
Fluid Passage Bolt

142540555
11222960V: RNCC: 3 | RNVC: 2
22296: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-480-2127
Tube Tee

144802127
130CU22: RNCC: 3 | RNVC: 2

28 Feb 1996

4730-14-302-2984
Tube To Boss Straight Adapter

143022984
000534282P: RNCC: 3 | RNVC: 2
0UT1-105: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-486-6245
Pipe Expansion Joint

144866245
MT1DN250PN16: RNCC: 3 | RNVC: 2

26 Mar 1997

4730-14-442-4144
Hose To Boss Straight Adapter

144424144
3973: RNCC: 3 | RNVC: 2
03973: RNCC: 5 | RNVC: 2

16 Oct 1990

4730-14-422-0817
Anchor And Reinforcement Pipe Clamp

144220817
SPAL3008PPDPALAS: RNCC: 3 | RNVC: 2

22 Feb 1988

4730-14-470-2975
Quick Disconnect Coupling Assembly

144702975
920 1020 ST: RNCC: 3 | RNVC: 2
1067339S00: RNCC: 5 | RNVC: 2

15 Jun 1994

4730-14-427-6136
Quick Disconnect Coupling Half

144276136
1032140: RNCC: 3 | RNVC: 2

26 Oct 1988

4730-14-516-1910
Tube To Boss Straight Adapter

145161910
1563C7: RNCC: 3 | RNVC: 2
0015076: RNCC: 3 | RNVC: 2

15 Sep 1999

4730-14-504-4839
Tube To Boss Straight Adapter

145044839
TR95920: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-246-4664
Swivel Retaining Pipe Flange

142464664
A64884: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-256-5675
Tube-Hose Fitting Compression Sleeve

142565675
0566001: RNCC: 3 | RNVC: 2
2441-831: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-554-0267
Quick Disconnect Coupling Assembly

145540267
SM01003148A: RNCC: 3 | RNVC: 2

7 Jun 2007

4730-14-446-3387
Tube To Hose Straight Adapter

144463387
60190610: RNCC: 3 | RNVC: 9

14 Mar 1991

4730-14-508-6386
Hose To Boss Straight Adapter

145086386
K15241PC549A: RNCC: 3 | RNVC: 2
K15241PC500AREP49: RNCC: 5 | RNVC: 2

23 Sep 1998

4730-14-344-3051
Tube To Boss Straight Adapter

143443051
A71176: RNCC: 3 | RNVC: 2

10 Aug 1977

4730-14-232-9213
Bouchon Filete Spec

142329213
58964: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-338-0821

4730-14-285-3727
Olive

142853727
500729: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-206-1044

4730-14-436-0932
Fourreau Porte Flex

144360932
H80582: RNCC: 3 | RNVC: 2

5 Dec 1989

4730-14-366-6513

4730-14-403-7457
Distributio Raccord

144037457
329560: RNCC: 3 | RNVC: 2

21 Aug 1985

4730-14-235-1766

4730-14-273-5431

4730-14-350-7279
Tube To Boss Straight Adapter

143507279
1020220033: RNCC: 3 | RNVC: 2
1020220033: RNCC: 5 | RNVC: 2

12 Jul 1978

4730-14-349-4054
Quick Disconnect Coupling Half

143494054
STH00836: RNCC: 3 | RNVC: 2
STH00836: RNCC: 5 | RNVC: 2

22 May 1978

4730-14-408-4453
Tube To Boss Straight Adapter

144084453
LW110-NS0610S: RNCC: 3 | RNVC: 2
89010660NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-512-8062
Tube Coupling

145128062
184742: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-344-7603
Pipe Flange

143447603
326512: RNCC: 3 | RNVC: 2
326512: RNCC: 5 | RNVC: 2
326512: RNCC: 5 | RNVC: 9

9 Sep 1977

4730-14-541-9851
Fluid Passage Bolt

145419851
20026-499: RNCC: 3 | RNVC: 2
502112003005A: RNCC: 3 | RNVC: 9

2 Jul 2004

4730-14-518-3313
Lubrication Fitting

145183313
AGRDX000002: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-538-2236
Tube Coupling Assembly

145382236
NGM0010033011018: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-304-6456
Tube Coupling

143046456
U1113F14CATBDE20: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-326-3281
Sediment Strainer Element

143263281
206429: RNCC: 3 | RNVC: 2
91314060: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-426-1070
Fluid Pressure Line Multiple Connector

144261070
8814020232: RNCC: 3 | RNVC: 2

4 Aug 1988

4730-14-329-2806
Pipeline Flexible Spacer

143292806
I131NTE80MAR: RNCC: 2 | RNVC: 2
DILNTE80MAR: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-396-6947
Tube To Boss Straight Adapter

143966947
79093497: RNCC: 3 | RNVC: 2
79093497: RNCC: 5 | RNVC: 9

27 Nov 1984

4730-14-470-9278
Tube To Boss Straight Adapter

144709278
98B12330009: RNCC: 3 | RNVC: 2
40344094: RNCC: 5 | RNVC: 2

13 Jul 1994

4730-14-425-8292
Quick Disconnect Plug

144258292
9023CPV6104A: RNCC: 3 | RNVC: 2

21 Jul 1988

4730-14-344-2801
Tube Coupling

143442801
157947: RNCC: 3 | RNVC: 2

10 Aug 1977

4730-14-392-9388
Tube Coupling

143929388
0024288183: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-575-4249
Tube Union

145754249
C73497-1: RNCC: 3 | RNVC: 2

5 Apr 2013

4730-14-424-6701
Tube To Boss Straight Adapter

144246701
258378: RNCC: 3 | RNVC: 2

2 Jun 1988

4730-14-316-9914
Hose Coupling Assembly

143169914
RK6119REP3: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-461-9353
Pipe To Boss Straight Adapter

144619353
T700A3710020100: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-436-7057
Bulkhead Hose Connector

144367057
DA2C203513811: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-494-5512
Tube To Boss Straight Adapter

144945512
643 445 302: RNCC: 3 | RNVC: 2
F300 0T 017 4690: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-399-2600
Sediment Strainer Element

143992600
155574: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-550-0156
Tube To Boss Straight Adapter

145500156
98.641.000102: RNCC: 3 | RNVC: 2

24 May 2006

4730-14-501-2396
Tube To Boss Straight Adapter

145012396
471-443: RNCC: 3 | RNVC: 2
471.443: RNCC: 3 | RNVC: 2
F300 0T 025 2801: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-297-8949
Bloc De Derivation

142978949
411MA0162FA2: RNCC: 3 | RNVC: 2
411MA162FA2: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-330-1247

4730-14-321-7611

4730-14-414-6472
Pipeline Flexible Spacer

144146472
DLT604352: RNCC: 3 | RNVC: 2

20 Feb 1987

4730-14-250-3247
Swivel Retaining Pipe Flange

142503247
ST406M32P21: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-375-7106
Tube To Boss Straight Adapter

143757106
4730AJ4.3DN8EQUIPE: RNCC: 2 | RNVC: 2
8901081366: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-526-8276
Return Tube Bend

145268276
5010429887: RNCC: 3 | RNVC: 2

7 Sep 2001

4730-14-489-8272
Hose To Boss Straight Adapter

144898272
E4750120: RNCC: 3 | RNVC: 9

22 Aug 1997

4730-14-435-1378
Tube-Hose Fitting Compression Sleeve

144351378
0124200040: RNCC: 3 | RNVC: 2
124 20 00 40: RNCC: 5 | RNVC: 2

23 Oct 1989

4730-14-529-4274
Quick Disconnect Coupling Half

145294274
NC4030080: RNCC: 3 | RNVC: 2
NC4030080: RNCC: 5 | RNVC: 2

29 Mar 2002

4730-14-362-0822
Pipe Flange

143620822
4500440: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-374-7768
Tube Tee

143747768
0000362170: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-321-7261
Fluid Pressure Line Multiple Connector

143217261
A11538: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-268-7158
Quick Disconnect Coupling Assembly

142687158
QSL20QSU20: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-367-0482

4730-14-329-2213
Fluid Pressure Line Multiple Connector

143292213
F10A740013: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-234-4809

4730-14-330-6520

4730-14-492-4395
Fluid Passage Bolt

144924395
5000592207: RNCC: 3 | RNVC: 2
F300 0T 007 6429: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-496-3471
Tube To Boss Straight Adapter

144963471
170071: RNCC: 3 | RNVC: 2
F300 0T 021 4209: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-426-6555
Hose To Boss Straight Adapter

144266555
16BK: RNCC: 3 | RNVC: 9

15 Sep 1988

4730-14-496-5100
Tube To Boss Straight Adapter

144965100
550061: RNCC: 3 | RNVC: 2
F300 0T 021 6149: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-484-6652
Fluid Passage Bolt

144846652
29405393: RNCC: 3 | RNVC: 2

28 Nov 1996

4730-14-370-2306
Lubricant Pressure Relief Fitting

143702306
0210095030: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-350-9222
Lubricating Fitting Set

143509222
9207711: RNCC: 3 | RNVC: 9

12 Jul 1978

4730-14-388-4158
Tube To Boss Straight Adapter

143884158
P1190: RNCC: 3 | RNVC: 2
7070: RNCC: 5 | RNVC: 2

3 Nov 1983

4730-14-434-2107
Tube Coupling

144342107
X511004: RNCC: 3 | RNVC: 2

12 Sep 1989

4730-14-509-6953
Tube-Hose Fitting Compression Sleeve

145096953
741VN10: RNCC: 3 | RNVC: 2
741.VN.10: RNCC: 3 | RNVC: 2
741VN10: RNCC: 5 | RNVC: 2
162043: RNCC: 5 | RNVC: 2
741 VN 10: RNCC: 5 | RNVC: 2

28 Oct 1998

4730-14-403-0354
Bulkhead Hose Connector

144030354
WBTXS16: RNCC: 3 | RNVC: 2
WBTXS16: RNCC: 5 | RNVC: 2

25 Jul 1985

4730-14-514-6473
Pipe Flange

145146473
10000D30404: RNCC: 3 | RNVC: 2

4 Jun 1999

4730-14-543-8399
Tube To Boss Straight Adapter

145438399
560502458: RNCC: 3 | RNVC: 2

14 Dec 2004

4730-14-415-3064
Pipeline Flexible Spacer

144153064
DILAT0FLEXNT100HHPN10: RNCC: 3 | RNVC: 2
1128299: RNCC: 5 | RNVC: 2

29 Apr 1987

4730-14-552-4608
Quick Disconnect Coupling Half

145524608
4444: RNCC: 3 | RNVC: 2

4 Jan 2007

4730-14-453-8847
Tube Tee

144538847
R1016Z09: RNCC: 3 | RNVC: 2
924561: RNCC: 5 | RNVC: 2
89472356: RNCC: 5 | RNVC: 2

12 Mar 1992

4730-14-395-3730
Tube Tee

143953730
N0189F39AREP36: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-344-7900

4730-14-216-1225
Raccord Special

142161225
30010MEB0: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-452-6826
Tube Union

144526826
NO PRIMARY REF14-452-6826: RNCC: 3 | RNVC: 2
980189-100: RNCC: 5 | RNVC: 9

15 Jan 1992

4730-14-420-0801
Tube Tee

144200801
LW305-NP253025N: RNCC: 3 | RNVC: 2
TRA25X30X25NNU: RNCC: 5 | RNVC: 2

18 Nov 1987

4730-14-509-1190
Quick Disconnect Coupling Half

145091190
931127: RNCC: 3 | RNVC: 2

21 Oct 1998

4730-14-504-9288
Lubrication Fitting Adapter

145049288
TUBE90385X00: RNCC: 3 | RNVC: 2
TUBE090385X00: RNCC: 5 | RNVC: 9

11 Mar 1998

4730-14-517-5348
Quick Disconnect Plug

145175348
R10391130: RNCC: 3 | RNVC: 2
1132855Y00: RNCC: 5 | RNVC: 2

5 Jan 2000

4730-14-525-6288
Tube To Boss Straight Adapter

145256288
20 236 911 0290: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-327-6163
Tube Tee

143276163
0264301940: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-513-0376
Tube Coupling

145130376
960000098: RNCC: 3 | RNVC: 2

3 Mar 1999

4730-14-378-0540
Fluid Pressure Line Multiple Connector

143780540
219876: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-256-5471
Tube To Boss Straight Adapter

142565471
RD004: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-437-2178
Embout D'adaptation

144372178
MKE02-42: RNCC: 3 | RNVC: 2

23 Jan 1990

4730-14-292-4748
Raccord De Transfer

142924748
F521-01-10: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-233-6050
Raccord Intermediai

142336050
NO PRIMARY REF14-233-6050: RNCC: 3 | RNVC: 2
831-63-913: RNCC: 5 | RNVC: 2
831-63-913: RNCC: 5 | RNVC: 9
831-63-913: RNCC: 5 | RNVC: 9
831-63-913: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-505-0739
Fluid Pressure Line Multiple Connector

145050739
FIP3: RNCC: 3 | RNVC: 2

11 Mar 1998

4730-14-387-0842
Sediment Strainer Element

143870842
T8002MR11F23B: RNCC: 3 | RNVC: 2
T8002MG8F13B: RNCC: 5 | RNVC: 2

24 Aug 1983

4730-14-452-5592
Pipe Flange

144525592
LN320033F26DN200: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-525-0810
Lubrication Fitting

145250810
PP50: RNCC: 3 | RNVC: 2

18 May 2001

4730-14-423-7071
Tube Fitting Clinch Sleeve

144237071
D8LS: RNCC: 3 | RNVC: 2
107014: RNCC: 5 | RNVC: 2

28 Apr 1988

4730-14-515-3833
Tube To Boss Straight Adapter

145153833
6200035: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-530-8144
Tube To Boss Straight Adapter

145308144
01011481: RNCC: 3 | RNVC: 2

8 Jul 2002

4730-14-492-6418
Hose To Boss Straight Adapter

144926418
B513: RNCC: 3 | RNVC: 2
F300 0T 008 3203: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-421-5771
Pipe Flange

144215771
D24137: RNCC: 3 | RNVC: 2

20 Jan 1988

4730-14-351-8075
Tube To Boss Straight Adapter

143518075
1051010: RNCC: 3 | RNVC: 2
544772G1002: RNCC: 5 | RNVC: 2
91502020: RNCC: 5 | RNVC: 9

12 Sep 1978

4730-14-442-1899
Straight Tubing Connector

144421899
16559166: RNCC: 3 | RNVC: 2
16559166: RNCC: 5 | RNVC: 9

3 Oct 1990

4730-14-474-0272
Pipeline Flexible Spacer

144740272
1501-DN150: RNCC: 3 | RNVC: 2

24 Jan 1995

4730-14-483-5433
Fluid Passage Bolt

144835433
NO PRIMARY REF14-483-5433: RNCC: 3 | RNVC: 2
9-529180-5: RNCC: 5 | RNVC: 9
4730-65-0000202: RNCC: 6 | RNVC: 9

19 Sep 1996

4730-14-507-0920
Straight Tubing Connector

145070920
Y07000-00-5100P005: RNCC: 3 | RNVC: 2

10 Jun 1998

4730-14-469-3237
Tube Tee

144693237
BN329512TERED48,3-42,4-2,77: RNCC: 3 | RNVC: 2

20 Apr 1994

4730-14-406-8072
Tube Fitting Clinch Sleeve

144068072
8424270047: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-261-2997
Fluid Pressure Line Multiple Connector

142612997
175-75-795: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-519-4961
Tube To Boss Straight Adapter

145194961
10339540: RNCC: 3 | RNVC: 2

22 Mar 2000

4730-14-525-7904
Tube To Boss Straight Adapter

145257904
F145309: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-543-0586
Tube Tee

145430586
TEEGALASOUDER76.1X2: RNCC: 3 | RNVC: 2
TEEGALASOUDER76.1X2: RNCC: 5 | RNVC: 2

18 Aug 2004

4730-14-388-4982
Sediment Strainer Element

143884982
26144: RNCC: 3 | RNVC: 9

3 Nov 1983

4730-14-397-9292
Bulkhead Hose Connector

143979292
31160500: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-496-5533
Union

144965533
518361: RNCC: 3 | RNVC: 2
F300 0T 021 6586: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-392-4634
Tube Union

143924634
1/4GGB: RNCC: 3 | RNVC: 2
1/4GGB: RNCC: 3 | RNVC: 2
GGB1-4: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-545-1935
Bulkhead Hose Connector

145451935
S718A4001802: RNCC: 3 | RNVC: 2

23 Mar 2005

4730-14-031-1706
Fluid Pressure Line Multiple Connector

140311706
VDP4819: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-449-7281
Pipe Elbow Assembly

144497281
721B909: RNCC: 3 | RNVC: 2
89232731: RNCC: 5 | RNVC: 2

4 Sep 1991

4730-14-329-8286
Bulkhead Hose Connector

143298286
0000363560: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-513-3682
Lubrication Fitting

145133682
64418203: RNCC: 3 | RNVC: 2

17 Mar 1999

4730-14-298-6539
Tube Coupling

142986539
6AX: RNCC: 3 | RNVC: 2
483116B: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-288-6087
Tube To Boss Straight Adapter

142886087
8C: RNCC: 3 | RNVC: 9

1 Jan 1972

4730-14-494-5533
Tube To Boss Straight Adapter

144945533
643 461 259: RNCC: 3 | RNVC: 2
F300 0T 017 4712: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-395-9696
Pipe Flange

143959696
195878: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-371-7194
Blocage De Raccord

143717194
BN314513F4-5: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-361-3164
Embase Superieure

143613164
NO PRIMARY REF14-361-3164: RNCC: 3 | RNVC: 2
29304-341: RNCC: 5 | RNVC: 9

24 Jan 1980

4730-14-332-0648
Bulkhead Hose Connector

143320648
R7408Z30: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-547-8203
Tube To Hose Straight Adapter

145478203
200324: RNCC: 3 | RNVC: 2
V871019: RNCC: 5 | RNVC: 2

17 Nov 2005

4730-14-542-7075
Bulkhead Hose Connector

145427075
47911111062106S1: RNCC: 3 | RNVC: 2

28 Jul 2004

4730-14-545-0642
Tube To Boss Straight Adapter

145450642
19215231: RNCC: 3 | RNVC: 2
01141621: RNCC: 3 | RNVC: 2

16 Mar 2005

4730-14-511-2723
Fluid Pressure Line Multiple Connector

145112723
0265160370: RNCC: 3 | RNVC: 2

9 Dec 1998

4730-14-379-9314
Tube To Boss Straight Adapter

143799314
7764: RNCC: 3 | RNVC: 9

20 Oct 1982

4730-14-434-5786
Fluid Pressure Line Multiple Connector

144345786
560098: RNCC: 3 | RNVC: 2

22 Sep 1989

4730-14-388-4075
Tube To Boss Straight Adapter

143884075
25270STD: RNCC: 3 | RNVC: 9

3 Nov 1983

4730-14-504-5355
Fuel Feeder Manifold

145045355
4124T013: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-535-4679
Hose To Boss Straight Adapter

145354679
93101221: RNCC: 3 | RNVC: 2
5005630063: RNCC: 5 | RNVC: 2
93101201: RNCC: 5 | RNVC: 9

27 May 2003

4730-14-551-9365
Tube To Boss Straight Adapter

145519365
82175550000: RNCC: 3 | RNVC: 2

10 Nov 2006

4730-14-434-8083
Tube Coupling

144348083
45152669: RNCC: 3 | RNVC: 2

4 Oct 1989

4730-14-470-5174
Pipe Flange

144705174
1074091C00: RNCC: 3 | RNVC: 2

22 Jun 1994

4730-14-497-4006
Tube Union

144974006
13930: RNCC: 3 | RNVC: 2
13930: RNCC: 5 | RNVC: 2
F300 0T 023 1279: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-482-0445
Self-Sealing Coupling Assembly

144820445
893439: RNCC: 3 | RNVC: 2

15 Jun 1996

4730-14-293-8675

4730-14-334-2644

4730-14-527-4055
Tube To Boss Straight Adapter

145274055
L145320: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-540-9885
Tube-Hose Fitting Compression Sleeve

145409885
PMEM50V10: RNCC: 3 | RNVC: 2

5 May 2004

4730-14-434-6969
Adaptateur Bride

144346969
BN329515D2DN200INOX: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-361-7329

4730-14-575-4569
Tube Elbow

145754569
19072F: RNCC: 3 | RNVC: 2

8 Apr 2013

4730-14-334-7534

4730-14-286-1161

4730-14-450-2575
Tube Coupling

144502575
Y31304R40H: RNCC: 3 | RNVC: 2

25 Sep 1991

4730-14-518-9418
Tube To Boss Straight Adapter

145189418
5000043337: RNCC: 3 | RNVC: 2
5000043337: RNCC: 6 | RNVC: 9

29 Feb 2000

4730-14-519-7156
Tube Tee

145197156
SARFLEX 32A6Q: RNCC: 3 | RNVC: 2

3 Apr 2000

4730-14-388-4607
Swivel Retaining Pipe Flange

143884607
02215011500: RNCC: 3 | RNVC: 2
022150115: RNCC: 5 | RNVC: 2

3 Nov 1983

4730-14-383-3649
Fluid Passage Bolt

143833649
32184414: RNCC: 3 | RNVC: 2

11 Apr 1983

4730-14-382-5668
Pipe Flange

143825668
20068461: RNCC: 3 | RNVC: 2
20068461: RNCC: 5 | RNVC: 9

17 Feb 1983

4730-14-493-0535
Tube To Boss Straight Adapter

144930535
2725355MI: RNCC: 3 | RNVC: 2
F300 0T 009 7491: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-363-6962
Tube To Boss Straight Adapter

143636962
91643528: RNCC: 3 | RNVC: 2

6 Jul 1980

4730-14-372-0025
Tube Tee

143720025
16787505: RNCC: 3 | RNVC: 2
16787505: RNCC: 5 | RNVC: 9

1 Sep 1981

4730-14-503-2209
Bulkhead Hose Connector

145032209
RA1M533303190: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-421-8857
Pipe Flange

144218857
98012151: RNCC: 3 | RNVC: 2

9 Feb 1988

4730-14-545-5299
Tube Tee

145455299
TE INEGAL FEMELLE26X20X26ZN: RNCC: 3 | RNVC: 2

18 Apr 2005

4730-14-475-2673
Tube-Hose Fitting Compression Sleeve

144752673
18241000: RNCC: 3 | RNVC: 2
RAR1642: RNCC: 5 | RNVC: 2

27 Mar 1995

4730-14-217-3563
Tube Coupling Assembly

142173563
3701S25X20A: RNCC: 3 | RNVC: 2
3701S25X20A: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-506-0339
Hose Expansion Ring

145060339
RA1M521101121: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-417-7821
Tube To Boss Straight Adapter

144177821
01051017: RNCC: 3 | RNVC: 2
231-4991: RNCC: 5 | RNVC: 2
231-4991: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-335-0434
Pipe Flange

143350434
GSM166-017F21: RNCC: 3 | RNVC: 2
A0291-001F20: RNCC: 5 | RNVC: 2

2 Jun 1976

4730-14-471-8091
Fluid Passage Bolt

144718091
MAT164-0100F2: RNCC: 3 | RNVC: 2

15 Sep 1994

4730-14-449-5538
Tube Union

144495538
RACCORD IMP G1/4A EM S10,2: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-340-6502

4730-14-367-7347

4730-14-576-9840
Quick Disconnect Wye

145769840
FLE-Q00178X00: RNCC: 3 | RNVC: 2
4730MT0200317: RNCC: 6 | RNVC: 9

26 Jul 2013

4730-14-339-8334

4730-14-361-4787

4730-14-221-6945

4730-14-368-8283
Diaphragme Raccord

143688283
R37175SMREP3: RNCC: 3 | RNVC: 2

10 Mar 1981

4730-14-435-6896
Tube-Hose Fitting Compression Sleeve

144356896
1122: RNCC: 3 | RNVC: 2
800B: RNCC: 5 | RNVC: 2
1122: RNCC: 5 | RNVC: 2

20 Nov 1989

4730-14-545-4041
Fluid Pressure Line Multiple Connector

145454041
DF1E726200106: RNCC: 3 | RNVC: 2

12 Apr 2005

4730-14-217-3330
Raccord Dequerre Sp

142173330
3160S73-30-905: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-300-7979
Raccord Femelle

143007979
0799-0051: RNCC: 3 | RNVC: 2
SAF0799-0051: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-346-7100
Bride Speciale

143467100
6784-1DT28: RNCC: 2 | RNVC: 2

12 Dec 1977

4730-14-576-3132
Quick Disconnect Coupling Half

145763132
4067: RNCC: 3 | RNVC: 2

12 Jun 2013

4730-14-365-2866

4730-14-367-4998

4730-14-362-9042

4730-14-564-1060
Hose Clamp

145641060
A430400100027: RNCC: 3 | RNVC: 2
302BA215: RNCC: 5 | RNVC: 2

8 Apr 2010

4730-14-428-5868
Equipe Raccord

144285868
SBE915: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-031-9405

4730-14-292-9145

4730-14-399-1233
Fluid Passage Bolt

143991233
5000787855: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-327-6177
Fluid Pressure Line Multiple Connector

143276177
0264357040: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-416-5744
Tube Fitting Brazing Ferrule

144165744
4730GF-DN76,1I108: RNCC: 2 | RNVC: 2
4730GF-DN76,1I108: RNCC: 5 | RNVC: 2
RAB9396: RNCC: 5 | RNVC: 2

18 Jun 1987

4730-14-312-8251
Fluid Pressure Line Multiple Connector

143128251
0249817250: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-546-5651
Tube Tee

145465651
105A18-24X150: RNCC: 3 | RNVC: 2

20 Jul 2005

4730-14-434-3054
Hydraulic Manifold Assembly

144343054
553436: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-428-4677
Tube Tee

144284677
R0610S06: RNCC: 3 | RNVC: 2
R6X10SX6: RNCC: 5 | RNVC: 2

8 Dec 1988

4730-14-479-1838
Quick Disconnect Coupling Assembly

144791838
SNA990MC78100F42: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-554-3877
Fluid Pressure Line Multiple Connector

145543877
0028220: RNCC: 3 | RNVC: 2

27 Jun 2007

4730-14-417-4451
Bulkhead Hose Connector

144174451
196944: RNCC: 3 | RNVC: 2

8 Jul 1987

4730-14-485-1124
Self-Sealing Coupling Half

144851124
1058878L00: RNCC: 3 | RNVC: 2

9 Jan 1997

4730-14-424-6611
Quick Disconnect Coupling Half

144246611
5000261515: RNCC: 3 | RNVC: 2
89409921: RNCC: 5 | RNVC: 2

2 Jun 1988

4730-14-546-2216
Tube To Boss Straight Adapter

145462216
RAC662250001: RNCC: 3 | RNVC: 2

15 Jun 2005

4730-14-395-3769
Tube To Gas Fitting Straight Adapter

143953769
N0189F63A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-455-1203
Tube To Boss Straight Adapter

144551203
0000142737: RNCC: 3 | RNVC: 2

1 May 1992

4730-14-361-0452
Tube To Boss Straight Adapter

143610452
RK5365REP52: RNCC: 3 | RNVC: 2
389086REP52: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-403-8962
Tube To Boss Straight Adapter

144038962
613927: RNCC: 3 | RNVC: 2

11 Sep 1985

4730-14-403-8583
Flange To Tube Straight Adapter

144038583
DLT102065: RNCC: 3 | RNVC: 2

28 Aug 1985

4730-14-273-5189

4730-14-260-9237

4730-14-273-5156

4730-14-301-7205
Fluid Passage Bolt

143017205
NO PRIMARY REF14-301-7205: RNCC: 3 | RNVC: 2
NMGVU80-4VRS9Z12CN18-8: RNCC: 5 | RNVC: 9
91H111: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-561-0679
Hose To Boss Straight Adapter

145610679
UMF1''1/4B/3/4F: RNCC: 3 | RNVC: 2
698100906: RNCC: 5 | RNVC: 2
5010113278: RNCC: 5 | RNVC: 2

11 Jun 2009

4730-14-495-5716
Tube To Boss Straight Adapter

144955716
J91192-5: RNCC: 3 | RNVC: 2
F300 0T 019 4958: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-560-7128
Bulkhead Hose Connector

145607128
CRB201710130B1N1: RNCC: 3 | RNVC: 2

19 May 2009

4730-14-366-8545

4730-14-358-6063

4730-14-261-8755

4730-14-230-4106
Pipe Flange

142304106
DLT008643: RNCC: 3 | RNVC: 2
DLT08643: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-433-4040
Bulkhead Hose Connector

144334040
0732835F00: RNCC: 3 | RNVC: 2

25 Jul 1989

4730-14-512-0621
Tube Tee

145120621
0050098: RNCC: 3 | RNVC: 2

3 Feb 1999

4730-14-573-3188
Pipe To Tube Swivel Joint

145733188
CS10FJH06: RNCC: 3 | RNVC: 2

3 Oct 2012

4730-14-575-7156
Spraying Nozzle

145757156
14100074683: RNCC: 3 | RNVC: 2

25 Apr 2013

4730-14-303-2020

4730-14-347-8143

4730-14-342-7641

4730-14-275-2968
Biellette Robinet

142752968
58204: RNCC: 3 | RNVC: 2
58204: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-278-8037

4730-14-278-0947

4730-14-279-0526

4730-14-466-1699
Hydraulic System Accessories Manifold

144661699
111736: RNCC: 3 | RNVC: 2
89170929: RNCC: 5 | RNVC: 2

27 Oct 1993

4730-14-541-6541
Double Swivel Weldment Handle

145416541
210600: RNCC: 3 | RNVC: 2

17 Jun 2004

4730-14-230-7158
Pipe Flange

142307158
GSM1487DET11: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-528-3518
Tube-Pipe Fitting Kit

145283518
SOCNL01: RNCC: 3 | RNVC: 2

23 Jan 2002

4730-14-390-4779
Fluid Passage Bolt

143904779
DLT601189: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-352-8279
Tube Tee

143528279
R101212S: RNCC: 3 | RNVC: 2
R10X12X12S: RNCC: 5 | RNVC: 2

14 Nov 1978

4730-14-031-8678
Tube To Boss Straight Adapter

140318678
53393: RNCC: 3 | RNVC: 2
VDPM02764: RNCC: 5 | RNVC: 2

5 Jul 1980

4730-14-295-6750
Sediment Strainer Element

142956750
3482711: RNCC: 3 | RNVC: 9

1 Jan 1973

4730-14-506-8537
Return Tube Bend

145068537
B47758: RNCC: 3 | RNVC: 2

27 May 1998

4730-14-386-4760
Fluid Passage Bolt

143864760
S4006CD: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-529-8684
Tube Coupling Inverted Nut

145298684
L327029: RNCC: 3 | RNVC: 2
520216: RNCC: 3 | RNVC: 2

17 Apr 2002

4730-14-313-2552
Fluid Pressure Line Multiple Connector

143132552
9776060201: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-268-0422
Quick Disconnect Coupling Half

142680422
QSL15: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-544-6131
Quick Disconnect Plug

145446131
HD 05121 00: RNCC: 3 | RNVC: 2
HD0512100: RNCC: 5 | RNVC: 2

14 Feb 2005

4730-14-260-9840

4730-14-262-1535

4730-14-329-0971

4730-14-504-9787
Tube To Boss Straight Adapter

145049787
5000133607: RNCC: 3 | RNVC: 2

11 Mar 1998

4730-14-505-4789
Pipe Flange

145054789
374293: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-502-4005
Self-Sealing Coupling Half

145024005
484983: RNCC: 3 | RNVC: 2

11 Dec 1997

4730-14-504-5942
Hose To Boss Straight Adapter

145045942
09930033: RNCC: 3 | RNVC: 2

25 Feb 1998

4730-14-254-6654

4730-14-575-7701
Flange To Tube Elbow

145757701
M2811343100000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-330-6525

4730-14-303-9351

4730-14-422-7575
Tube To Boss Straight Adapter

144227575
F870XS12M18: RNCC: 3 | RNVC: 2
91614744: RNCC: 5 | RNVC: 2

17 Mar 1988

4730-14-287-7379
Tube-Hose Fitting Compression Sleeve

142877379
11216330N: RNCC: 3 | RNVC: 2
21633: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-322-2269
Tube Fitting Clinch Sleeve

143222269
055B00-519047F: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-500-5305
Tube Tee

145005305
31540: RNCC: 3 | RNVC: 2
F300 0T 024 5478: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-290-5506

4730-14-359-5863
Tube To Boss Straight Adapter

143595863
4DDR8-6NU: RNCC: 3 | RNVC: 2
0024331303: RNCC: 5 | RNVC: 2
0024331303: RNCC: 5 | RNVC: 9

15 Oct 1979

4730-14-355-1841
Return Tube Bend

143551841
5000502104: RNCC: 3 | RNVC: 2
5000502104: RNCC: 5 | RNVC: 9

19 Mar 1979

4730-14-349-5923
Tube Fitting Brazing Ferrule

143495923
CN31: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-552-5948
Hose To Boss Straight Adapter

145525948
6501MPA008A: RNCC: 3 | RNVC: 2

18 Jan 2007

4730-14-243-1493
Tube To Boss Straight Adapter

142431493
70281185: RNCC: 3 | RNVC: 2
281185: RNCC: 5 | RNVC: 9
70281185: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-535-6390
Tube To Boss Straight Adapter

145356390
81119301: RNCC: 3 | RNVC: 2
5005030927: RNCC: 5 | RNVC: 2

11 Jun 2003

4730-14-252-1746

4730-14-530-7217
Hose Coupling Assembly

145307217
6501BEH113: RNCC: 3 | RNVC: 2

3 Jul 2002

4730-14-498-9639
Fluid Pressure Line Multiple Connector

144989639
A07051303: RNCC: 3 | RNVC: 2
5000293143: RNCC: 3 | RNVC: 2
A07051303: RNCC: 5 | RNVC: 9
F300 0T 014 1354: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-247-7965

4730-14-263-6411

4730-14-350-2582
Pipe Expansion Joint

143502582
281-65: RNCC: 3 | RNVC: 2

14 Jun 1978

4730-14-494-1536
Tube To Boss Straight Adapter

144941536
79038255: RNCC: 3 | RNVC: 2
F300 0T 015 7420: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-474-2467
Quick Disconnect Coupling Assembly

144742467
6M3796E00: RNCC: 3 | RNVC: 9

6 Feb 1995

4730-14-498-9635
Tube To Boss Straight Adapter

144989635
5000293139: RNCC: 3 | RNVC: 2
A07050241: RNCC: 3 | RNVC: 2
A07050241: RNCC: 5 | RNVC: 9
F300 0T 014 1350: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-457-1041
Tube Tee

144571041
74181410000: RNCC: 3 | RNVC: 2
5172407100: RNCC: 5 | RNVC: 2
724071: RNCC: 5 | RNVC: 9
748121106: RNCC: 5 | RNVC: 9
8121106: RNCC: 5 | RNVC: 9
HOL74181410000: RNCC: 5 | RNVC: 9

6 Aug 1992

4730-14-252-1174

4730-14-407-2642
Tube To Boss Straight Adapter

144072642
160H632507-56: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-466-7490
Tube Tee

144667490
11RA12L16X150CO6NUDRISEAL: RNCC: 3 | RNVC: 2
11RA12L16X150C06: RNCC: 5 | RNVC: 1
88402800: RNCC: 5 | RNVC: 2
88402810: RNCC: 5 | RNVC: 2
5005030210: RNCC: 5 | RNVC: 2
811L33691: RNCC: 5 | RNVC: 9

24 Nov 1993

4730-14-031-1441
Pipe Flange

140311441
55704: RNCC: 3 | RNVC: 2
VDPM02930: RNCC: 5 | RNVC: 2

14 Jun 1980

4730-14-525-7915
Tube To Boss Straight Adapter

145257915
F145328: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-542-2057
Fluid-Emulsion Spray Nozzle

145422057
591057408: RNCC: 3 | RNVC: 2
591057408: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-272-4261
Tube Coupling

142724261
R20423REP1: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-204-4037

4730-14-469-9937
Sediment Strainer Element

144699937
47007: RNCC: 3 | RNVC: 2

25 May 1994

4730-14-513-2165
Lubrication Fitting

145132165
64411203: RNCC: 3 | RNVC: 2

10 Mar 1999

4730-14-291-3935
Pipe Flange

142913935
0235221290: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-342-5991
Tube-Hose Fitting Compression Sleeve

143425991
9009CPH4032: RNCC: 3 | RNVC: 2
9009CPH40312: RNCC: 5 | RNVC: 2

16 May 1977

4730-14-230-5981
Tube Coupling Assembly

142305981
3951S12X16X12A: RNCC: 3 | RNVC: 2
3951S12X16X12A: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-304-7087

4730-14-522-8263
Tube To Boss Straight Adapter

145228263
9936500600: RNCC: 3 | RNVC: 2

29 Nov 2000

4730-14-546-7729
Flexible Tube Coupling Assembly

145467729
RA1M741214600A2: RNCC: 3 | RNVC: 2

17 Aug 2005

4730-14-516-2291
Fluid Passage Bolt

145162291
0032165: RNCC: 3 | RNVC: 2
VC 16X150+2JC 16: RNCC: 5 | RNVC: 2

15 Sep 1999

4730-14-335-1367
Pipeline Flexible Spacer

143351367
I131NTH20PN16: RNCC: 2 | RNVC: 2
DILNTH20PN16: RNCC: 3 | RNVC: 2
DILNTH20PN16: RNCC: 5 | RNVC: 9

3 Jun 1976

4730-14-456-5675
Tube-Hose Fitting Compression Sleeve

144565675
5000494317: RNCC: 3 | RNVC: 2

9 Jul 1992

4730-14-550-8742
Pipe Flange

145508742
RCN330X: RNCC: 3 | RNVC: 2
5010650053: RNCC: 5 | RNVC: 2

25 Jul 2006

4730-14-368-7524

4730-14-247-2094

4730-14-235-1581
Sediment Strainer Element

142351581
83141: RNCC: 3 | RNVC: 2
83141: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-389-9948
Fluid Passage Bolt

143899948
0000157132: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-536-0460
Tube To Hose Straight Adapter

145360460
PE65401DD10: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-391-6435
Quick Disconnect Coupling Assembly

143916435
9959354: RNCC: 3 | RNVC: 2
9959354: RNCC: 5 | RNVC: 9

21 Mar 1984

4730-14-350-4110
Tube To Boss Straight Adapter

143504110
214266: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-392-5533
Tube To Boss Straight Adapter

143925533
0000252170: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-554-1199
Pipe Flange

145541199
0298530490: RNCC: 3 | RNVC: 2

12 Jun 2007

4730-14-369-7045
Tube-Hose Fitting Compression Sleeve

143697045
84283802: RNCC: 3 | RNVC: 2
LL023-NS38S: RNCC: 3 | RNVC: 2
84243802: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-283-1095
Bulkhead Hose Connector

142831095
L65DAN9032M21P4: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-372-2178
Tube Tee

143722178
7189872108: RNCC: 3 | RNVC: 2
16149600: RNCC: 5 | RNVC: 2

1 Sep 1981

4730-14-426-7949
Tube Tee

144267949
4730HEING168,3X11-60,3X4: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-244-4958
Tube To Boss Straight Adapter

142444958
368: RNCC: 3 | RNVC: 2
512736: RNCC: 5 | RNVC: 2
LB368: RNCC: 5 | RNVC: 2
0024325081: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-284-6415
Tube To Boss Straight Adapter

142846415
16107000: RNCC: 3 | RNVC: 2
161070: RNCC: 5 | RNVC: 2
1610700008: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-563-7069
Tube Outlet

145637069
W96017: RNCC: 3 | RNVC: 2

8 Mar 2010

4730-14-517-0403
Sediment Strainer Element

145170403
FCA16E1KV01: RNCC: 3 | RNVC: 2
613-700-028-0: RNCC: 5 | RNVC: 2

28 Oct 1999

4730-14-414-5770
Tube To Boss Straight Adapter

144145770
91141782: RNCC: 3 | RNVC: 2

11 Feb 1987

4730-14-291-8332
Pipeline Flexible Spacer

142918332
DILAT0FLEX100EAUDEMER8X18X180: RNCC: 3 | RNVC: 9

1 Jan 1972

4730-14-513-3691
Tube Coupling

145133691
64306007: RNCC: 3 | RNVC: 2

17 Mar 1999

4730-14-260-9279
Pipe Flange

142609279
7062DC1F1F57XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-332-0674
Bulkhead Hose Connector

143320674
R7008Z13: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-262-1613

4730-14-352-5665
Tube To Boss Straight Adapter

143525665
A11A522360620: RNCC: 3 | RNVC: 2

16 Oct 1978

4730-14-507-6059
Sediment Strainer Body

145076059
3635-98: RNCC: 3 | RNVC: 2

27 Jul 1998

4730-14-280-4505

4730-14-223-2984

4730-14-361-0346

4730-14-440-4852
Fluid Flow Restrictor

144404852
007711228P: RNCC: 3 | RNVC: 2

16 Jul 1990

4730-14-409-6308
Bulkhead Hose Connector

144096308
DA1D203535510: RNCC: 3 | RNVC: 2

28 May 1986

4730-14-569-5724
Pipe Flange

145695724
6542122: RNCC: 3 | RNVC: 2

28 Sep 2011

4730-14-564-7964
Hydraulic System Accessories Manifold

145647964
E15499: RNCC: 3 | RNVC: 2

7 Jun 2010

4730-14-569-3583
Tube To Hose Elbow

145693583
5005130450: RNCC: 1 | RNVC: 2
81310810: RNCC: 3 | RNVC: 2

7 Sep 2011

4730-14-323-6126

4730-14-428-5857
Raccord Buse

144285857
SBE1045: RNCC: 3 | RNVC: 2

8 Dec 1988

4730-14-304-0342

4730-14-032-1521
Bloc De Presertissa

140321521
FM8S: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-414-1651
Bulkhead Hose Connector

144141651
152962: RNCC: 3 | RNVC: 2

22 Jan 1987

4730-14-293-3829
Pipe Flange

142933829
0172050190: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-290-9523

4730-14-276-7597
Sediment Strainer Element

142767597
X553597: RNCC: 3 | RNVC: 2
0148000M00: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-378-6562
Tube To Boss Straight Adapter

143786562
8454384966: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-244-4597
Tube To Boss Straight Adapter

142444597
35313: RNCC: 3 | RNVC: 2
328071: RNCC: 5 | RNVC: 2
0604292700: RNCC: 5 | RNVC: 2
DBA35313: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-524-5852
Quick Disconnect Coupling Half

145245852
1823376000: RNCC: 3 | RNVC: 2
SYB2265: RNCC: 5 | RNVC: 2

28 Mar 2001

4730-14-369-6349
Self-Sealing Coupling Assembly

143696349
405631: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-294-9497

4730-14-309-7174
Embout Racc Auto-Ob

143097174
A77347-1: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-362-7591
Tube To Boss Straight Adapter

143627591
774: RNCC: 3 | RNVC: 2

19 Mar 1980

4730-14-379-6823
Tube Tee

143796823
3024514: RNCC: 3 | RNVC: 2
E3024514: RNCC: 5 | RNVC: 2

20 Oct 1982

4730-14-325-9015
Pipe Flange

143259015
AS34TV107REP11: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-474-8874
Hose To Boss Straight Adapter

144748874
20321726: RNCC: 3 | RNVC: 2

8 Mar 1995

4730-14-415-3646
Tube To Boss Straight Adapter

144153646
8454162166NU: RNCC: 3 | RNVC: 2

5 May 1987

4730-14-450-0251
Pipe Elbow Assembly

144500251
721B910: RNCC: 3 | RNVC: 2
89232733: RNCC: 5 | RNVC: 2

18 Sep 1991

4730-14-435-1783
Tube Coupling

144351783
93428: RNCC: 3 | RNVC: 2

24 Oct 1989

4730-14-391-7105
Tube-Hose Fitting Compression Sleeve

143917105
741PN10: RNCC: 3 | RNVC: 2
741 PN 10: RNCC: 5 | RNVC: 2
741PN10: RNCC: 5 | RNVC: 2
74741PN10: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-427-1591
Bulkhead Hose Connector

144271591
160H632506-76: RNCC: 3 | RNVC: 2

6 Oct 1988

4730-14-520-1314
Tube Coupling

145201314
34750810: RNCC: 3 | RNVC: 2
5005330150: RNCC: 5 | RNVC: 2

15 May 2000

4730-14-547-6114
Hose Connector Sleeve

145476114
1A105: RNCC: 3 | RNVC: 2
AA006505: RNCC: 6 | RNVC: 9

19 Oct 2005

4730-14-043-0928
Tube Nipple

4730-14-459-0868
Raccord

144590868
DLT024751: RNCC: 3 | RNVC: 2
RAR1604: RNCC: 5 | RNVC: 2

19 Nov 1992

4730-14-569-5750
Spool Piece

145695750
42 099 615: RNCC: 3 | RNVC: 2

28 Sep 2011

4730-14-238-4129
Tu Droit Adaptateur

4730-14-282-2434
Tube To Boss Straight Adapter

142822434
R406Z19: RNCC: 3 | RNVC: 2
R406Z19TF: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-443-4943
Fluid Filter Element

144434943
20F: RNCC: 3 | RNVC: 9

27 Nov 1990

4730-14-325-9043
Pipe Flange

143259043
AS34TV104REP1: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-400-9510
Bulkhead Hose Connector

144009510
DA2C203525820A1: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-329-4265
Bulkhead Hose Connector

143294265
523916: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-553-6068
Tube Tee

145536068
930 135 045: RNCC: 3 | RNVC: 2
TA14L: RNCC: 3 | RNVC: 2

23 Apr 2007

4730-14-310-8841

4730-14-309-7786

4730-14-311-7752

4730-14-414-1443
Pipeline Flexible Spacer

144141443
660X3L250N605: RNCC: 3 | RNVC: 2

22 Jan 1987

4730-14-413-5628
Pipe Fitting Assortment

144135628
R24886RACCORDMANCHE150MM: RNCC: 3 | RNVC: 2

17 Dec 1986

4730-14-236-7084

4730-14-328-3904

4730-14-237-5704
Raccord Special

142375704
A75416: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-458-3836
Quick-Disconnect Nipple

144583836
6FCB4PM-NPT-SS: RNCC: 3 | RNVC: 9

22 Oct 1992

4730-14-362-1251
Pipeline Flexible Spacer

143621251
DILNTH150MN7068: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-557-4290
Tube Elbow

145574290
COUDE00100: RNCC: 3 | RNVC: 2

10 Jun 2008

4730-14-542-2047
Fluid-Emulsion Spray Nozzle

145422047
511045308: RNCC: 3 | RNVC: 2
511045308: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-396-4017
Fluid Pressure Line Multiple Connector

143964017
0RA25-30X150NU: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-565-7840
Tube Union

145657840
5005130528: RNCC: 1 | RNVC: 2
81127700: RNCC: 3 | RNVC: 2
25312535: RNCC: 5 | RNVC: 2

22 Sep 2010

4730-14-375-7124
Tube To Boss Straight Adapter

143757124
8401383466: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-553-4782
Flange To Boss Elbow

145534782
0000370470: RNCC: 3 | RNVC: 2

5 Apr 2007

4730-14-493-0891
Tube To Boss Straight Adapter

144930891
0000502496: RNCC: 3 | RNVC: 2
F300 0T 010 0899: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-470-5178
Pipe Flange

144705178
1067715N00: RNCC: 3 | RNVC: 2

22 Jun 1994

4730-14-544-6227
Tube To Boss Straight Adapter

145446227
0120802007: RNCC: 3 | RNVC: 2
071338020000000: RNCC: 5 | RNVC: 2

14 Feb 2005

4730-14-280-4271
Fluid Pressure Line Multiple Connector

142804271
0000362860: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-535-1530
Tube To Boss Straight Adapter

145351530
5000137657: RNCC: 3 | RNVC: 2

14 May 2003

4730-14-441-0372
Tube To Boss Straight Adapter

144410372
G04717: RNCC: 3 | RNVC: 2
3704-87: RNCC: 5 | RNVC: 2

16 Aug 1990

4730-14-262-1809

4730-14-556-8498
Special Nipple

145568498
82418453000: RNCC: 3 | RNVC: 2

15 Apr 2008

4730-14-215-1532

4730-14-554-4159
Tube To Boss Straight Adapter

145544159
0298567680: RNCC: 3 | RNVC: 2

4 Jul 2007

4730-14-515-2684
Tube To Boss Straight Adapter

145152684
9721010018: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-518-5214
Tube To Boss Straight Adapter

145185214
0000712884: RNCC: 3 | RNVC: 2

9 Feb 2000

4730-14-263-7478
Tube Tee

142637478
T14: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-453-2759
Tube Tee

144532759
TE50: RNCC: 3 | RNVC: 2
91727642: RNCC: 5 | RNVC: 2

12 Feb 1992

4730-14-550-4269
Tube Fitting Socket Welded Ferrule

145504269
7072652315: RNCC: 3 | RNVC: 2

20 Jun 2006

4730-14-231-5750

4730-14-467-5312
Quick-Disconnect Nipple

144675312
AQM38TGAMR2: RNCC: 3 | RNVC: 2

17 Jan 1994

4730-14-401-3229
Hydraulic Manifold Assembly

144013229
02K5545100: RNCC: 3 | RNVC: 2

5 Jun 1985

4730-14-542-4759
Quick Disconnect Coupling Half

145424759
1032.123: RNCC: 3 | RNVC: 2

21 Jul 2004

4730-14-226-8284
Tube Tee

142268284
R10X10X12S: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-391-7109
Tube To Boss Straight Adapter

143917109
742DGA10: RNCC: 3 | RNVC: 2
74742DGA10: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-427-3275
Tube Tee

144273275
4730HDEG355,6X8: RNCC: 2 | RNVC: 2

13 Oct 1988

4730-14-545-1194
Tube To Boss Straight Adapter

145451194
427723J: RNCC: 3 | RNVC: 2

18 Mar 2005

4730-14-545-2317
Sediment Strainer Element

145452317
FL18405: RNCC: 3 | RNVC: 2

26 Mar 2005

4730-14-248-9848
Fluid Pressure Line Multiple Connector

142489848
43269: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-434-3035
Tube To Boss Straight Adapter

144343035
554033: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-354-7529
Electrovalve Embase

143547529
150365: RNCC: 3 | RNVC: 2

20 Feb 1979

4730-14-399-1378
Fluid Pressure Line Multiple Connector

143991378
617597: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-517-8002
Tube Coupling Inverted Nut

145178002
720.03.10: RNCC: 3 | RNVC: 2
8020125W00: RNCC: 5 | RNVC: 2

13 Jan 2000

4730-14-508-8971
Fluid Passage Bolt

145088971
50060297: RNCC: 3 | RNVC: 2

7 Oct 1998

4730-14-516-8454
Tube To Boss Straight Adapter

145168454
168265REF1-2GG44B: RNCC: 3 | RNVC: 2

20 Oct 1999

4730-14-424-9689
Tube Coupling

144249689
SKA25X5: RNCC: 3 | RNVC: 2
SKA25X5: RNCC: 3 | RNVC: 9

16 Jun 1988

4730-14-382-8728
Tube To Boss Straight Adapter

143828728
PE60841H22: RNCC: 3 | RNVC: 2

17 Feb 1983

4730-14-249-8335
Fluid Passage Bolt

142498335
0000451944: RNCC: 3 | RNVC: 2
451944: RNCC: 5 | RNVC: 9
0000451944: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-475-7109
Tube To Boss Straight Adapter

144757109
105L25194: RNCC: 3 | RNVC: 2
81116711: RNCC: 5 | RNVC: 2
5A12L22X150CO: RNCC: 5 | RNVC: 2
5005030891: RNCC: 5 | RNVC: 2
5005030891: RNCC: 6 | RNVC: 9

26 Apr 1995

4730-14-506-1944
Pipe Flange

145061944
L059: RNCC: 3 | RNVC: 2
RAQ0335: RNCC: 5 | RNVC: 2

9 Apr 1998

4730-14-253-9826
Tube To Boss Straight Adapter

142539826
272278: RNCC: 3 | RNVC: 2
272278: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-453-7687
Tube To Gas Fitting Straight Adapter

144537687
GAI16SRA3C: RNCC: 3 | RNVC: 2
GAI16SRA3C: RNCC: 3 | RNVC: 9
GAI16PSR: RNCC: 5 | RNVC: 9

5 Mar 1992

4730-14-523-0432
Pipe Flange

145230432
37384: RNCC: 3 | RNVC: 2

20 Dec 2000

4730-14-377-5041
Pipe Expansion Joint

143775041
26442905500: RNCC: 3 | RNVC: 2
264429055: RNCC: 5 | RNVC: 9

17 May 1982

4730-14-332-4850
Tube To Boss Straight Adapter

143324850
83605: RNCC: 3 | RNVC: 2
83605: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-554-5937
Flange To Tube Elbow

145545937
0000371830: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-277-1287
Fluid Pressure Line Multiple Connector

142771287
0000112726: RNCC: 3 | RNVC: 2
0000112726: RNCC: 5 | RNVC: 9
112726: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-447-7552
Pipeline Flexible Spacer

144477552
EVCYAC9S: RNCC: 3 | RNVC: 2
EVCYAC9: RNCC: 5 | RNVC: 2

3 Jun 1991

4730-14-447-2882
Self-Sealing Coupling Half

144472882
1932-539: RNCC: 3 | RNVC: 2

15 May 1991

4730-14-235-1902
Tube Tee

142351902
1TR8X4X8NN: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-433-2684
Hose To Boss Straight Adapter

144332684
0245-21: RNCC: 3 | RNVC: 2
543017: RNCC: 5 | RNVC: 2
7932564331: RNCC: 5 | RNVC: 2
9400245219: RNCC: 5 | RNVC: 2

18 Jul 1989

4730-14-354-2449
Tube Coupling

143542449
16321829: RNCC: 3 | RNVC: 2
16321829: RNCC: 5 | RNVC: 9

30 Jan 1979

4730-14-287-7897
Pipe Flange

142877897
RUAN7625M121P18A: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-325-6806
Tube Tee

143256806
0000365350: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-032-1746
Tube To Boss Straight Adapter

140321746
35288: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-280-4213

4730-14-502-7961
Raccord

145027961
7W2634: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-562-5416
Pipeline Flexible Spacer

145625416
0429062: RNCC: 3 | RNVC: 2
A1/100/KR320-WG/E: RNCC: 3 | RNVC: 2

3 Nov 2009

4730-14-417-7952

4730-14-458-3812

4730-14-270-5277
Bague Stop

142705277
3910627: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-328-8663
Quick Disconnect Coupling Half

143288663
155S212D: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-330-8755
Pipeline Flexible Spacer

143308755
DILAT0FLEXNT20HHPN16: RNCC: 3 | RNVC: 9
I131H20: RNCC: 4 | RNVC: 1

2 Jul 1975

4730-14-230-9748
Raccord Special

142309748
183874: RNCC: 3 | RNVC: 2
183874: RNCC: 5 | RNVC: 2
183874: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-571-9988
Quick Disconnect Coupling Half

145719988
3805 08 13: RNCC: 3 | RNVC: 2

30 May 2012

4730-14-287-8701

4730-14-242-8018

4730-14-311-5843

4730-14-040-4055
Tube Tee

140404055
R12X20SX12: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-543-0484
Pipe Flange

145430484
43446A: RNCC: 3 | RNVC: 2
43446A: RNCC: 5 | RNVC: 2

18 Aug 2004

4730-14-456-7076
Pipe To Tube Straight Adapter

144567076
050102405: RNCC: 3 | RNVC: 2

24 Jul 1992

4730-14-032-1570
Pipe Flange

140321570
CMT30E9030AF4DE10REP2: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-575-3436
Pipe Bushing

145753436
D050 02B: RNCC: 3 | RNVC: 2

28 Mar 2013

4730-14-393-8923

4730-14-577-1240
Tube Cross

145771240
ASNA3753LJLJ: RNCC: 1 | RNVC: 2
ASNA3753LJLJ: RNCC: 3 | RNVC: 2

12 Aug 2013

Load More Results