What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 111 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 111 of 185

4730-14-562-8135
Bulkhead Hose Connector

145628135
7421447851: RNCC: 3 | RNVC: 2
21447851: RNCC: 5 | RNVC: 2

24 Nov 2009

4730-14-334-3351

4730-14-552-1140
Straight Tubing Connector

145521140
0072870280: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-525-6295
Tube To Boss Straight Adapter

145256295
20 236 911 2090: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-380-9713
Tube Tee

143809713
130CU22-15-22: RNCC: 3 | RNVC: 2

14 Dec 1982

4730-14-540-7245
Tube Tee

145407245
38051484: RNCC: 3 | RNVC: 2
ND062250: RNCC: 5 | RNVC: 2
4848ZG8613181266: RNCC: 6 | RNVC: 9

22 Apr 2004

4730-14-264-6593
Tube To Boss Straight Adapter

142646593
13PCK: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-341-1290
Tube To Boss Straight Adapter

143411290
002511070P: RNCC: 3 | RNVC: 2

16 Mar 1977

4730-14-506-0363
Bulkhead Hose Connector

145060363
RA1M521709191U1: RNCC: 3 | RNVC: 2

2 Apr 1998

4730-14-420-4820
Lubrication Fitting

144204820
1101885700: RNCC: 3 | RNVC: 2
18857: RNCC: 5 | RNVC: 2

10 Dec 1987

4730-14-426-2956
Check Valve Adapter

144262956
CR445618: RNCC: 3 | RNVC: 2
EA20156: RNCC: 5 | RNVC: 2
445618: RNCC: 5 | RNVC: 2

18 Aug 1988

4730-14-493-8143
Fluid Pressure Line Multiple Connector

144938143
5005030226: RNCC: 3 | RNVC: 2
F300 0T 014 1238: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-395-0534
Fluid Pressure Line Multiple Connector

143950534
0301527330: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-230-7104
Pipe Flange

142307104
GSM1947REP1MALE: RNCC: 3 | RNVC: 2
GSM1947DET1MALE: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-417-7747
Bulkhead Hose Connector

144177747
9816080066NU: RNCC: 3 | RNVC: 2

1 Sep 1999

4730-14-552-5858
Fluid Flow Restrictor

145525858
9401CEL4010001: RNCC: 3 | RNVC: 2

18 Jan 2007

4730-14-408-5640
Tube To Boss Straight Adapter

144085640
GE12SMEDB2A: RNCC: 3 | RNVC: 2
426272: RNCC: 5 | RNVC: 2

2 Apr 1986

4730-14-318-6427
Sediment Strainer Element

143186427
A6136: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-217-5374
Mamelon Double Equi

142175374
RA404: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-282-0667
Raccord Et Tape

142820667
6510C5-7: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-274-3384

4730-14-329-7885

4730-14-250-0144

4730-14-248-3451
Manchon

142483451
C668: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-282-1360

4730-14-310-8836

4730-14-317-0032

4730-14-484-4739
Swivel Flange To Hose Straight Adapter

144844739
5000572680: RNCC: 3 | RNVC: 2

21 Nov 1996

4730-14-452-5587
Pipe Flange

144525587
LN320033F26DN65: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-394-7589
Tube To Boss Straight Adapter

143947589
84056317: RNCC: 3 | RNVC: 2

28 Aug 1984

4730-14-376-7598
Fluid Pressure Line Multiple Connector

143767598
1081190014: RNCC: 3 | RNVC: 2

28 Apr 1982

4730-14-554-9325
Hydraulic Swivel Joint

145549325
WH8LMKDSCFX: RNCC: 3 | RNVC: 2
435869: RNCC: 5 | RNVC: 2

10 Sep 2007

4730-14-515-1726
Fluid Flow Restrictor

145151726
A95000135: RNCC: 3 | RNVC: 2

9 Jul 1999

4730-14-526-6064
Fluid Passage Bolt

145266064
P99340A: RNCC: 3 | RNVC: 2

3 Aug 2001

4730-14-550-8707
Pipe Flange

145508707
FHS310CFX: RNCC: 3 | RNVC: 2
5010650040: RNCC: 5 | RNVC: 2

25 Jul 2006

4730-14-420-0505
Tube To Boss Straight Adapter

144200505
EGE08LREDA3C: RNCC: 3 | RNVC: 2
EGE08LREDA3C: RNCC: 3 | RNVC: 9
EVGE8LR: RNCC: 5 | RNVC: 2
EVGE8LR: RNCC: 5 | RNVC: 9
EVGE8LR: RNCC: 5 | RNVC: 9

18 Nov 1987

4730-14-220-6117
Tube Tee

142206117
R6SX8X8: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-542-2870
Lubrication Fitting

145422870
988933823: RNCC: 3 | RNVC: 2
988933823: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-213-4811
Fluid Passage Bolt

142134811
A00458: RNCC: 3 | RNVC: 2
A458: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-522-8340
Tube Coupling Assembly

145228340
12 25 30 200: RNCC: 3 | RNVC: 2
240 260: RNCC: 3 | RNVC: 2

29 Nov 2000

4730-14-274-6606
Tube-Hose Fitting Compression Sleeve

142746606
7062CE1F3B48UE10R1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-224-4017
Fluid Pressure Line Multiple Connector

142244017
351031: RNCC: 3 | RNVC: 2
35982: RNCC: 5 | RNVC: 2
062076409: RNCC: 5 | RNVC: 9
701985: RNCC: 5 | RNVC: 9
76409: RNCC: 5 | RNVC: 9
DBA351031: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-308-4856
Tube To Boss Straight Adapter

143084856
466-7M18P43: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-238-7390
Fluid Passage Bolt

142387390
5171082400: RNCC: 3 | RNVC: 2
710824: RNCC: 5 | RNVC: 1
710824: RNCC: 5 | RNVC: 2
153617: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-311-1720
Pipeline Flexible Spacer

143111720
DILAT0FLEX65HHBRIDESPERCEES: RNCC: 3 | RNVC: 9

1 Jan 1974

4730-14-438-8332
Fluid Pressure Line Multiple Connector

144388332
DLT130182: RNCC: 3 | RNVC: 2

9 Apr 1990

4730-14-405-9045
Hose To Boss Straight Adapter

144059045
3117460: RNCC: 3 | RNVC: 2

12 Dec 1985

4730-14-291-8331
Pipeline Flexible Spacer

142918331
DILAT0FLEX75EAUDEMER6X18X160: RNCC: 3 | RNVC: 9

1 Jan 1972

4730-14-525-0734
Tube To Hose Straight Adapter

145250734
PE67409LE16: RNCC: 3 | RNVC: 2

16 May 2001

4730-14-451-5973
Fluid Passage Bolt

144515973
F452: RNCC: 3 | RNVC: 2

25 Nov 1991

4730-14-508-8771
Straight Tubing Connector

145088771
RD12: RNCC: 3 | RNVC: 2
270150120: RNCC: 5 | RNVC: 2

5 Oct 1998

4730-14-512-0169
Tube To Boss Straight Adapter

145120169
0052821: RNCC: 3 | RNVC: 2
93811384: RNCC: 3 | RNVC: 9

2 Feb 1999

4730-14-387-5856
Tube To Boss Straight Adapter

143875856
040B0140: RNCC: 3 | RNVC: 2
40B0140: RNCC: 5 | RNVC: 2

15 Sep 1983

4730-14-471-3096
Tube To Boss Straight Adapter

144713096
F8BRAB14M18: RNCC: 3 | RNVC: 2
426656: RNCC: 5 | RNVC: 2

17 Aug 1994

4730-14-042-8262
Sediment Strainer Element

140428262
P109181: RNCC: 3 | RNVC: 2
89254887: RNCC: 5 | RNVC: 2

11 Dec 1980

4730-14-265-2376
Tube Fitting Clinch Sleeve

142652376
205-40: RNCC: 3 | RNVC: 2
DA40N: RNCC: 3 | RNVC: 2
1A40: RNCC: 3 | RNVC: 2
BE40: RNCC: 3 | RNVC: 2
AA006496: RNCC: 6 | RNVC: 9

1 Jan 1970

4730-14-397-8013
Tube-Hose Fitting Compression Sleeve

143978013
M4ZS330D6005: RNCC: 3 | RNVC: 9

31 Jan 1985

4730-14-489-5382
Tube Coupling

144895382
29688621: RNCC: 3 | RNVC: 2

30 Jul 1997

4730-14-333-7114
Fluid Pressure Line Multiple Connector

143337114
715941: RNCC: 3 | RNVC: 2
5171594100: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-430-1383
Self-Sealing Coupling Half

144301383
BE001100: RNCC: 3 | RNVC: 2
BE0011: RNCC: 5 | RNVC: 2

6 Mar 1989

4730-14-500-2415
Fluid Passage Bolt

145002415
5516012097: RNCC: 3 | RNVC: 2
F300 0T 024 2435: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-396-1977
Tube Tee

143961977
15499: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-307-3977
Tube Tee

143073977
DLT049454: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-556-5243
Pipe Flange

145565243
2A 2 E EF 558300 001 5/5 DN38: RNCC: 3 | RNVC: 2

18 Mar 2008

4730-14-324-9427

4730-14-540-1232
Quick Disconnect Coupling Half

145401232
506979: RNCC: 3 | RNVC: 2

11 Mar 2004

4730-14-361-8423
Bulkhead Hose Connector

143618423
8811746200: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-540-6449
Anchor And Reinforcement Pipe Clamp

145406449
6150090021: RNCC: 3 | RNVC: 2
4848ZG8613180305: RNCC: 6 | RNVC: 9

14 Apr 2004

4730-14-389-7978
Tube To Boss Straight Adapter

143897978
8120253466: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-445-7235
Swivel Joint Parts Kit

144457235
BLC236372: RNCC: 3 | RNVC: 2

22 Feb 1991

4730-14-342-4522
Tube Fitting Clinch Sleeve

143424522
15818000: RNCC: 3 | RNVC: 2
8930503104: RNCC: 5 | RNVC: 2

16 May 1977

4730-14-524-5300
Tube To Boss Straight Adapter

145245300
23S06072: RNCC: 3 | RNVC: 2

21 Mar 2001

4730-14-505-3709
Tube To Boss Straight Adapter

145053709
04502100233: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-549-7771
Tube Tee

145497771
93405500: RNCC: 3 | RNVC: 2
5010631459: RNCC: 5 | RNVC: 2

11 May 2006

4730-14-518-7151
Tube Tee

145187151
SARFLEX 32A60: RNCC: 3 | RNVC: 2

16 Feb 2000

4730-14-362-5216
Tube To Boss Straight Adapter

143625216
220440000: RNCC: 3 | RNVC: 9

19 Mar 1980

4730-14-388-4990
Tube-Hose Fitting Compression Sleeve

143884990
332521: RNCC: 3 | RNVC: 9

3 Nov 1983

4730-14-496-3497
Tube To Boss Straight Adapter

144963497
174548: RNCC: 3 | RNVC: 2
F300 0T 021 4235: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-238-6754
Pipeline Flexible Spacer

142386754
DILNH125MAR: RNCC: 3 | RNVC: 9
I131NH125MAR: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-505-0573
Tube To Boss Straight Adapter

145050573
103100008: RNCC: 3 | RNVC: 2
5005030343: RNCC: 5 | RNVC: 2
5005030343: RNCC: 6 | RNVC: 9

11 Mar 1998

4730-14-325-9000
Pipe Flange

143259000
AS34TV105REP11: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-305-4548
Fluid Pressure Line Multiple Connector

143054548
103090190101: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-398-2368
Fluid Passage Bolt

143982368
RU13698: RNCC: 3 | RNVC: 2
RU13698: RNCC: 5 | RNVC: 2

31 Jan 1985

4730-14-484-9851
Jeu Tuyaux

144849851
55J269A276: RNCC: 3 | RNVC: 9

17 Dec 1996

4730-14-374-8667
Tube To Boss Straight Adapter

143748667
4110-947: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-374-7778
Bulkhead Hose Connector

143747778
0000365330: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-226-0161
Tube Coupling Inverted Nut

142260161
R108: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-351-0604

4730-14-263-6431
Purgeur Special

142636431
E34704A: RNCC: 3 | RNVC: 2
E34704: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-518-3422
Self-Sealing Coupling Half

145183422
HPPXX000021: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-299-6010

4730-14-346-0814

4730-14-307-8456
Ebauche Tubulure

143078456
B252FD4AREP2: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-356-1722

4730-14-307-0321

4730-14-484-9902
Barillet Equipe

144849902
000MA434: RNCC: 3 | RNVC: 2

18 Dec 1996

4730-14-552-5762
Sediment Strainer Element

145525762
321821: RNCC: 3 | RNVC: 2

17 Jan 2007

4730-14-415-1429
Tube To Boss Straight Adapter

144151429
84052128: RNCC: 3 | RNVC: 2

16 Apr 1987

4730-14-307-7101
Tube To Boss Straight Adapter

143077101
24156185700: RNCC: 3 | RNVC: 2
156J1857: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-414-4984
Tube To Boss Straight Adapter

144144984
84012086NU: RNCC: 3 | RNVC: 2

4 Feb 1987

4730-14-526-2463
Hydraulic System Accessories Manifold

145262463
10617444: RNCC: 3 | RNVC: 2

11 Jul 2001

4730-14-325-6781
Bulkhead Hose Connector

143256781
0000364420: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-431-9034
Quick-Disconnect Nipple

144319034
729831A: RNCC: 3 | RNVC: 2
729831A: RNCC: 3 | RNVC: 2
729831A: RNCC: 5 | RNVC: 2

10 May 1989

4730-14-347-4662
Tube Coupling

143474662
A11A522360404: RNCC: 3 | RNVC: 2

1 Mar 1978

4730-14-541-7946
Hose To Gas Fitting Straight Adapter

145417946
E65109000002: RNCC: 3 | RNVC: 2

26 Jun 2004

4730-14-327-6159
Fluid Pressure Line Multiple Connector

143276159
0264207950: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-512-9258
Tube Coupling

145129258
74360: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-451-3797
Tube Coupling

144513797
333603: RNCC: 3 | RNVC: 2
ESA10S: RNCC: 5 | RNVC: 2

15 Nov 1991

4730-14-512-8263
Tube Coupling

145128263
209636: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-275-0229

4730-14-362-0207

4730-14-260-9203

4730-14-514-9905
Tube To Boss Swivel Joint

145149905
M 605 K AGJ 20 410: RNCC: 3 | RNVC: 2
M605KAGJ20410: RNCC: 5 | RNVC: 2

25 Jun 1999

4730-14-444-0304
Tube-Pipe Fitting Kit

144440304
1012-22-1: RNCC: 3 | RNVC: 9

18 Dec 1990

4730-14-499-8148
Tube To Boss Straight Adapter

144998148
57861-7: RNCC: 3 | RNVC: 2
57861.7: RNCC: 3 | RNVC: 2
F300 0T 023 8053: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-347-6369
Tube Coupling Assembly

143476369
0-3601SF20A: RNCC: 3 | RNVC: 2
0-3601SF20A: RNCC: 5 | RNVC: 9

1 Mar 1978

4730-14-358-8140

4730-14-378-8918
Tube To Boss Straight Adapter

143788918
44171: RNCC: 3 | RNVC: 2

6 Sep 1982

4730-14-282-6420

4730-14-378-4525
Tube To Boss Straight Adapter

143784525
A82170: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-516-3512
Tube To Boss Straight Adapter

145163512
510008931102: RNCC: 3 | RNVC: 2

22 Sep 1999

4730-14-542-3815
Tube To Gas Fitting Straight Adapter

145423815
A31048: RNCC: 3 | RNVC: 2

8 Jul 2004

4730-14-576-3431
Hose Clamp

145763431
138522: RNCC: 3 | RNVC: 2

13 Jun 2013

4730-14-562-7320
Fluid Pressure Line Multiple Connector

145627320
WH25SMKDSOMDCF: RNCC: 3 | RNVC: 2
WH25SMKDSOMDCF: RNCC: 5 | RNVC: 9

18 Nov 2009

4730-14-233-5213

4730-14-344-5075

4730-14-321-7392

4730-14-395-0420
Tube To Boss Straight Adapter

143950420
0000252180: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-382-5086
Fluid Pressure Line Multiple Connector

143825086
16764908: RNCC: 3 | RNVC: 2
16764908: RNCC: 5 | RNVC: 9

17 Feb 1983

4730-14-399-0785
Tube To Boss Straight Adapter

143990785
603472: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-411-6785
Return Tube Bend

144116785
232437: RNCC: 3 | RNVC: 2

27 Aug 1986

4730-14-246-7674
Tube Fitting Clinch Sleeve

142467674
9560248: RNCC: 3 | RNVC: 2
9560248: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-338-4040
Tube To Boss Straight Adapter

143384040
33886: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-513-8665
Tube To Boss Straight Adapter

145138665
646862: RNCC: 3 | RNVC: 2

14 Apr 1999

4730-14-292-9880
Fluid Flow Restrictor

142929880
10755: RNCC: 3 | RNVC: 2
10755: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-503-1764
Bulkhead Hose Connector

145031764
RA1M534304180: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-436-2548
Quick Disconnect Coupling Half

144362548
HA0533100: RNCC: 3 | RNVC: 2

12 Dec 1989

4730-14-554-5938
Flange To Tube Elbow

145545938
0000372400: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-550-1446
Fluid Flow Restrictor

145501446
FGFB756380A1: RNCC: 3 | RNVC: 2

5 Jun 2006

4730-14-337-5417
Tube Tee

143375417
26545911000: RNCC: 3 | RNVC: 2
265459110: RNCC: 5 | RNVC: 9

7 Oct 1976

4730-14-381-3492
Tube Tee

143813492
1547350008: RNCC: 3 | RNVC: 2
15473500: RNCC: 5 | RNVC: 2

25 Jan 1983

4730-14-390-6427
Quick Disconnect Coupling Half

143906427
01721221: RNCC: 3 | RNVC: 2
91641460: RNCC: 5 | RNVC: 2

26 Jan 1984

4730-14-511-0873
Anchor And Reinforcement Pipe Clamp

145110873
E27852BP040040Y: RNCC: 2 | RNVC: 2

2 Dec 1998

4730-14-040-4035
Tube Tee

140404035
R6X6LX6S: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-297-6927
Fluid Pressure Line Multiple Connector

142976927
Q01R12X6X12L: RNCC: 3 | RNVC: 2
Q01R12X6X12LNU: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-031-1723
Fluid Pressure Line Multiple Connector

140311723
VDP5023: RNCC: 3 | RNVC: 2

14 Jun 1980

4730-14-258-0646
Fluid Passage Bolt

142580646
F109235: RNCC: 3 | RNVC: 2
F109235: RNCC: 6 | RNVC: 9

1 Jan 1969

4730-14-211-1502
Tube To Boss Straight Adapter

142111502
26663: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-544-6249
Fluid Pressure Line Multiple Connector

145446249
TRTE12S NU RENVEORIENTABLE: RNCC: 3 | RNVC: 2
073039000012001: RNCC: 5 | RNVC: 2

14 Feb 2005

4730-14-526-6728
Tube Coupling

145266728
SKA30X3: RNCC: 3 | RNVC: 2

21 Aug 2001

4730-14-413-6248
Tube Fitting Brazing Ferrule

144136248
15-25-3804: RNCC: 3 | RNVC: 9

6 Jan 1987

4730-14-514-6359
Fluid Pressure Line Multiple Connector

145146359
8098436304: RNCC: 3 | RNVC: 2

3 Jun 1999

4730-14-265-9519
Tube To Boss Straight Adapter

142659519
MF117: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-502-4850
Self-Sealing Coupling Assembly

145024850
0026174195: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-341-7240
Tube Tee

143417240
1TR12X12X8: RNCC: 3 | RNVC: 2
TRA12X12X8N: RNCC: 3 | RNVC: 2
10RA12X12X8: RNCC: 3 | RNVC: 2

14 Apr 1977

4730-14-518-2340
Tube To Boss Straight Adapter

145182340
455879B: RNCC: 3 | RNVC: 2
5001834704: RNCC: 3 | RNVC: 2

28 Jan 2000

4730-14-453-3295
Tube Tee

144533295
80374: RNCC: 3 | RNVC: 2

17 Feb 1992

4730-14-306-8780
Tube To Boss Straight Adapter

143068780
225063: RNCC: 3 | RNVC: 2
225063: RNCC: 5 | RNVC: 2
225063: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-230-7148
Pipe Flange

142307148
GSM1487DET1: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-544-6233
Tube To Boss Straight Adapter

145446233
0134752007: RNCC: 3 | RNVC: 2
073038016000000: RNCC: 5 | RNVC: 2

14 Feb 2005

4730-14-448-9941
Tube To Hose Straight Adapter

144489941
34610566: RNCC: 3 | RNVC: 2
10566: RNCC: 5 | RNVC: 2
B627: RNCC: 5 | RNVC: 2

24 Jul 1991

4730-14-542-1825
Tube Coupling

145421825
511059308: RNCC: 3 | RNVC: 2
511059308: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-405-4416
Tube Repair Plug

144054416
X11: RNCC: 3 | RNVC: 2

27 Nov 1985

4730-14-405-8369
Pipe Flange

144058369
D24056: RNCC: 3 | RNVC: 2

4 Dec 1985

4730-14-414-0637
Self-Sealing Coupling Half

144140637
96109623: RNCC: 3 | RNVC: 2

22 Jan 1987

4730-14-264-6581
Tube To Boss Straight Adapter

142646581
110033: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-521-1248
Tube To Boss Straight Adapter

145211248
0024248603: RNCC: 3 | RNVC: 2

11 Jul 2000

4730-14-331-3262
Sediment Strainer Element

143313262
K37987: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-494-1689
Fluid Pressure Line Multiple Connector

144941689
53721: RNCC: 3 | RNVC: 2
F300 0T 015 7821: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-515-2924
Fluid Flow Restrictor

145152924
0009037053: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-271-8684
Pipeline Flexible Spacer

142718684
B0120AN5BJ0INTSURREF0ULEMENT: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-551-8058
Tube To Boss Straight Adapter

145518058
GE06LMEDCF: RNCC: 3 | RNVC: 2
427360: RNCC: 5 | RNVC: 2
GE6LMEDCF: RNCC: 5 | RNVC: 2
GE06LMEDCF: RNCC: 5 | RNVC: 9

25 Oct 2006

4730-14-299-6013

4730-14-576-0613
Flange To Tube Elbow

145760613
M2821344000000: RNCC: 3 | RNVC: 2

28 May 2013

4730-14-576-7487
Hose To Boss Straight Adapter

145767487
RA.30C09.18: RNCC: 3 | RNVC: 2

9 Jul 2013

4730-14-201-9199

4730-14-252-6888
Tube To Boss Straight Adapter

142526888
RA508: RNCC: 3 | RNVC: 2
021190: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-220-6098
Tube Tee

142206098
R20X10X20L: RNCC: 3 | RNVC: 2
R14641: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-416-2057
Fuel Feeder Manifold

144162057
0308207090: RNCC: 3 | RNVC: 2

3 Jun 1987

4730-14-274-6985
Tube Tee

142746985
R6X10SX10: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-536-0449
Bulkhead Hose Connector

145360449
PE65001E18: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-350-9201

4730-14-294-2335

4730-14-504-4835
Hose To Boss Straight Adapter

145044835
TR95912: RNCC: 3 | RNVC: 2

18 Feb 1998

4730-14-371-4800
Tube Tee

143714800
1TR14X16X14NU: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-497-3912
Fluid Pressure Line Multiple Connector

144973912
13943: RNCC: 3 | RNVC: 2
F300 0T 023 1177: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-540-3119
Fluid Passage Bolt

145403119
10694377000: RNCC: 3 | RNVC: 2

18 Mar 2004

4730-14-371-0525
Tube Tee

143710525
8450086466: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-040-0058
Tube To Boss Straight Adapter

140400058
0000362870: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-395-3868
Tube Tee

143953868
84501268NU: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-451-8037
Tube-Hose Fitting Compression Sleeve

144518037
TXS14: RNCC: 3 | RNVC: 2
91713697: RNCC: 5 | RNVC: 2

4 Dec 1991

4730-14-446-3709
Hose To Boss Straight Adapter

144463709
556043: RNCC: 3 | RNVC: 2
556043: RNCC: 5 | RNVC: 9

18 Mar 1991

4730-14-441-4166
Bulkhead Hose Connector

144414166
PM1A723125100: RNCC: 3 | RNVC: 2
PM1A723125100: RNCC: 5 | RNVC: 2

22 Aug 1990

4730-14-552-3814
Pipe Flange

145523814
43043090: RNCC: 3 | RNVC: 2
43043090: RNCC: 3 | RNVC: 9

18 Dec 2006

4730-14-494-4762
Tube To Boss Straight Adapter

144944762
T52 796 90: RNCC: 3 | RNVC: 2
F300 0T 017 3811: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-549-4502
Fluid Passage Bolt

145494502
7400074033: RNCC: 3 | RNVC: 2

5 Apr 2006

4730-14-552-4596
Quick Disconnect Coupling Half

145524596
1082.163: RNCC: 3 | RNVC: 2

4 Jan 2007

4730-14-364-4018
Fluid Pressure Line Multiple Connector

143644018
106098002801: RNCC: 3 | RNVC: 2
106098002801: RNCC: 5 | RNVC: 2

7 Aug 1980

4730-14-509-6956
Tube-Hose Fitting Compression Sleeve

145096956
741.VN.16: RNCC: 3 | RNVC: 2
741VN16: RNCC: 3 | RNVC: 2
162046: RNCC: 5 | RNVC: 2
741 VN 16: RNCC: 5 | RNVC: 2
741VN16: RNCC: 5 | RNVC: 2

28 Oct 1998

4730-14-308-0637

4730-14-032-1534
Pipe Flange

140321534
CMT30E9030AF3DE30REP3: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-518-3425
Tube To Boss Straight Adapter

145183425
HRAXX000002: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-448-0412
Quick Disconnect Coupling Half

144480412
A5622: RNCC: 3 | RNVC: 2

12 Jun 1991

4730-14-553-1346
Tube To Boss Straight Adapter

145531346
GE08SMEDCF: RNCC: 3 | RNVC: 2
427385: RNCC: 5 | RNVC: 2
GE08SMEDCF: RNCC: 5 | RNVC: 9

6 Mar 2007

4730-14-553-6067
Tube Tee

145536067
930 135 040: RNCC: 3 | RNVC: 2
TA12L: RNCC: 3 | RNVC: 2

23 Apr 2007

4730-14-206-1888
Fluid Passage Bolt

142061888
97209: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-405-4405
Tube Repair Plug

144054405
P4: RNCC: 3 | RNVC: 2

27 Nov 1985

4730-14-271-1670

4730-14-338-2522
Bronze Tube Coude

143382522
CSN120: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-571-9155
Lubrication Fitting Adapter

145719155
05010206: RNCC: 3 | RNVC: 2
05010206: RNCC: 3 | RNVC: 2
5010206: RNCC: 5 | RNVC: 2
5010206: RNCC: 5 | RNVC: 2

24 May 2012

4730-14-372-3045
Tube To Boss Straight Adapter

143723045
9105252858: RNCC: 3 | RNVC: 2
VDP7570: RNCC: 5 | RNVC: 2
A225212758: RNCC: 5 | RNVC: 9

1 Sep 1981

4730-14-462-7156
Tube To Boss Straight Adapter

144627156
SBE1143: RNCC: 3 | RNVC: 2

28 Apr 1993

4730-14-243-4420

4730-14-386-0233
Tube Coupling Inverted Nut

143860233
TID14845: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-283-8094
Tube Tee

142838094
5TR14-8-8NN: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-225-0115

4730-14-562-6821
Tube Coupling Nut Ring

145626821
7-2605-32D: RNCC: 3 | RNVC: 2

13 Nov 2009

4730-14-414-6619
Tube Fitting Socket Welded Ferrule

144146619
4730HK-EME42,4: RNCC: 2 | RNVC: 2
MEC10478: RNCC: 3 | RNVC: 2

20 Feb 1987

4730-14-549-7021
Fluid Pressure Line Multiple Connector

145497021
216571-0: RNCC: 3 | RNVC: 2

27 Apr 2006

4730-14-577-3991
Tube Coupling

145773991
2081828: RNCC: 3 | RNVC: 2

12 Sep 2013

4730-14-554-1955
Tube To Boss Straight Adapter

145541955
507 846: RNCC: 3 | RNVC: 2
507 846: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-14-487-5440
Bulkhead Hose Connector

144875440
RA1M521304141U1: RNCC: 3 | RNVC: 2

10 Apr 1997

4730-14-382-8806
Tube To Boss Straight Adapter

143828806
PE40201K04: RNCC: 3 | RNVC: 2

2 Aug 2000

4730-14-042-5596
Bulkhead Hose Connector

140425596
408693: RNCC: 3 | RNVC: 2
408693: RNCC: 5 | RNVC: 2

19 Apr 1978

4730-14-342-2181
Lubrication Fitting

143422181
16438: RNCC: 3 | RNVC: 9

14 Apr 1977

4730-14-397-9356
Tube To Hose Straight Adapter

143979356
1LNG17: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-368-0985
Pipe Flange

143680985
119433: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-333-3396

4730-14-242-6624

4730-14-367-7170

4730-14-267-1635
Raccord

142671635
DM42: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-577-0733
Drainage Pipe Coupling

145770733
0301017550: RNCC: 3 | RNVC: 2

5 Aug 2013

4730-14-565-2172
Tube Elbow

145652172
820.030.050: RNCC: 3 | RNVC: 2
SA017491: RNCC: 5 | RNVC: 2

27 Jul 2010

4730-14-357-0815
Cordon A Pions

143570815
S2160CD: RNCC: 3 | RNVC: 2

7 Jun 1979

4730-14-313-6267
Tambour Denroulemen

143136267
ECEMAT7306A: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-367-0488

4730-14-356-6624

4730-14-324-1290

4730-14-417-7813
Tube To Boss Straight Adapter

144177813
LW117-NC2812L: RNCC: 3 | RNVC: 2
8405282747NU: RNCC: 5 | RNVC: 2

22 Jul 1987

4730-14-265-2377
Tube Fitting Clinch Sleeve

142652377
205-45: RNCC: 3 | RNVC: 2
DA45N: RNCC: 3 | RNVC: 2
1A45: RNCC: 3 | RNVC: 2
BE45: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-353-4197
Fluid Passage Bolt

143534197
76150000600: RNCC: 3 | RNVC: 2
761500006: RNCC: 5 | RNVC: 9

8 Dec 1978

4730-14-527-6889
Tube-Pipe Fitting Kit

145276889
717042: RNCC: 3 | RNVC: 2

13 Nov 2001

4730-14-230-5300
Fuel Feeder Manifold

142305300
0218157060: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-278-4073

4730-14-335-7314

4730-14-202-6538

4730-14-559-3907
Pipe Expansion Joint

145593907
26042900005: RNCC: 3 | RNVC: 2

6 Jan 2009

4730-14-365-3470

4730-14-380-4561

4730-14-519-4998
Tube To Boss Straight Adapter

145194998
01011075: RNCC: 3 | RNVC: 2

22 Mar 2000

4730-14-325-9004
Pipe Flange

143259004
AS34TV105REP16: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-293-6375
Tube To Boss Straight Adapter

142936375
67320: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-327-6168
Tube Tee

143276168
0264350880: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-532-2031
Self-Sealing Coupling Half

145322031
92232508: RNCC: 3 | RNVC: 2

16 Oct 2002

4730-14-352-8288
Bulkhead Hose Connector

143528288
R6S6MZ67: RNCC: 3 | RNVC: 2
R58Z67: RNCC: 5 | RNVC: 2

14 Nov 1978

4730-14-392-9365
Tube To Boss Straight Adapter

143929365
0024248837: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-365-6840
Tube Tee

143656840
9458202758: RNCC: 3 | RNVC: 2
VDP4823: RNCC: 5 | RNVC: 2

8 Oct 1980

4730-14-294-3210
Tube Coupling

142943210
GA70456: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-031-1346
Tube To Boss Straight Adapter

140311346
53550: RNCC: 3 | RNVC: 2
VDPM02765: RNCC: 5 | RNVC: 2

14 Jun 1980

4730-14-426-1074
Sediment Strainer Element

144261074
8814020239: RNCC: 3 | RNVC: 2

4 Aug 1988

4730-14-213-7605
Tube To Boss Straight Adapter

142137605
9782000634: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-319-1963
Tube Tee

143191963
5380571: RNCC: 3 | RNVC: 2
5380571: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-408-4407
Tube Tee

144084407
4730AJ4.1DN8NU: RNCC: 2 | RNVC: 2
MEC10823: RNCC: 3 | RNVC: 2
Q15T8SNU: RNCC: 3 | RNVC: 2
8904080066NU: RNCC: 5 | RNVC: 2

27 Mar 1986

4730-14-277-3463
Fluid Pressure Line Multiple Connector

142773463
0249857960: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-541-9047
Fluid Pressure Line Multiple Connector

145419047
SC020821: RNCC: 3 | RNVC: 2
R0D10: RNCC: 5 | RNVC: 2
R0D106: RNCC: 5 | RNVC: 2

2 Jul 2004

4730-14-553-7677
Pipe Flange

145537677
100 006: RNCC: 3 | RNVC: 2
100 006: RNCC: 3 | RNVC: 2

21 May 2007

4730-14-501-1121
Fluid Passage Bolt

145011121
1901029: RNCC: 3 | RNVC: 2
F300 0T 025 1514: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-489-8237
Hose Expansion Ring

144898237
E3870029: RNCC: 3 | RNVC: 9

22 Aug 1997

4730-14-373-0881
Quick Disconnect Coupling Half

143730881
RBE3-7806-0D9ICW: RNCC: 3 | RNVC: 2

21 Sep 1981

4730-14-252-2495
Tube Tee

142522495
NG410-25PL20: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-416-3263
Tube To Boss Straight Adapter

144163263
LV117-NS1404S: RNCC: 3 | RNVC: 2
84051413NU: RNCC: 5 | RNVC: 2

3 Jun 1987

4730-14-554-5950
Tube Fitting Insert

145545950
0000510120: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-423-7362
Flange To Tube Elbow

144237362
2320720770: RNCC: 3 | RNVC: 2

28 Apr 1988

4730-14-406-7540
Tube Tee

144067540
T20: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-307-0426
Tube To Boss Straight Adapter

143070426
561468: RNCC: 3 | RNVC: 2
5156146800: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-505-5015
Pipe Flange

145055015
7023436: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-323-4839
Bulkhead Hose Connector

143234839
0210170230: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-348-4726
Tube To Boss Straight Adapter

143484726
01050613: RNCC: 3 | RNVC: 2
202369001570: RNCC: 5 | RNVC: 2
1050613: RNCC: 5 | RNVC: 2
231-4963: RNCC: 5 | RNVC: 2
91526270: RNCC: 5 | RNVC: 2

29 Mar 1978

4730-14-536-5132
Exhaust-Intake Pneumatic Muffler

145365132
PZC-S1006: RNCC: 3 | RNVC: 2
PZC-S1006: RNCC: 5 | RNVC: 9
EN098851: RNCC: 6 | RNVC: 9

28 Aug 2003

4730-14-556-0031
Tube Coupling

145560031
0292730560: RNCC: 3 | RNVC: 2

21 Jan 2008

4730-14-510-0187
Branched Tubing Connector

145100187
R20X12X20: RNCC: 3 | RNVC: 2
4730AA2005823: RNCC: 6 | RNVC: 9

4 Nov 1998

4730-14-296-0342

4730-14-496-3509
Tube To Boss Straight Adapter

144963509
175747: RNCC: 3 | RNVC: 2
F300 0T 021 4247: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-563-3406
Hose Clamp

145633406
R18201530: RNCC: 3 | RNVC: 2

28 Jan 2010

4730-14-457-7344
Quick-Disconnect Nipple

144577344
0378-51286: RNCC: 3 | RNVC: 2

17 Sep 1992

4730-14-295-8552

4730-14-235-1525

4730-14-458-0908
Tube Elbow

144580908
W25S: RNCC: 3 | RNVC: 2

7 Oct 1992

4730-14-296-5000

4730-14-250-1286

4730-14-324-4769

4730-14-524-0540
Anchor And Reinforcement Pipe Clamp

145240540
0120368: RNCC: 3 | RNVC: 2
SER0120368: RNCC: 5 | RNVC: 9

22 Feb 2001

4730-14-527-3845
Tube To Boss Straight Adapter

145273845
H145325: RNCC: 3 | RNVC: 2

24 Oct 2001

4730-14-543-8322
Tube To Boss Straight Adapter

145438322
9450146: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-476-7075
Tube To Boss Straight Adapter

144767075
101163941030: RNCC: 3 | RNVC: 2

28 Jun 1995

4730-14-371-2556
Fluid Passage Bolt

143712556
5000044007: RNCC: 3 | RNVC: 2
5000044007: RNCC: 5 | RNVC: 9

5 Aug 1981

4730-14-299-9533

4730-14-554-7085
Tube To Boss Straight Adapter

145547085
19289: RNCC: 3 | RNVC: 2

7 Aug 2007

4730-14-504-7094
Tube Tee

145047094
5001833873: RNCC: 3 | RNVC: 2
423695K: RNCC: 3 | RNVC: 2
455876Y: RNCC: 5 | RNVC: 9

27 Feb 1998

4730-14-510-3952
Tube-Pipe Fitting Kit

145103952
SOC160: RNCC: 3 | RNVC: 2
4730AA8023144: RNCC: 6 | RNVC: 9

4 Nov 1998

4730-14-473-2814
Tube To Boss Swivel Joint

144732814
7N08HT: RNCC: 3 | RNVC: 2
9560136030: RNCC: 5 | RNVC: 2

13 Dec 1994

4730-14-295-0988
Swivel Retaining Pipe Flange

142950988
273916: RNCC: 3 | RNVC: 2
273916: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-260-9336

4730-14-419-4736
Tube To Boss Straight Adapter

144194736
G/3246-3/8-1/8: RNCC: 3 | RNVC: 2
G3246-3/8-1/8: RNCC: 5 | RNVC: 2

21 Oct 1987

4730-14-460-1388
Bulkhead Hose Connector

144601388
3/4WGGB: RNCC: 3 | RNVC: 2
3/4WGGB: RNCC: 3 | RNVC: 9

13 Jan 1993

4730-14-568-8773
Tube Reducer

145688773
5001863720: RNCC: 1 | RNVC: 2
893 184 699 4: RNCC: 3 | RNVC: 2

13 Jul 2011

4730-14-385-6926
Tubulure

143856926
2-34035: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-526-4718
Tube Coupling

145264718
RP1B500056001: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-377-1042
Tube To Boss Straight Adapter

143771042
376: RNCC: 3 | RNVC: 2
91313240: RNCC: 5 | RNVC: 2

17 May 1982

4730-14-304-4826
Fluid Passage Bolt

143044826
43053: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-307-8461
Bossage Special

143078461
B252FD2AREP5: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-448-9824
Tube Tee

144489824
T16SA3C: RNCC: 3 | RNVC: 2
XT16S: RNCC: 3 | RNVC: 9
038553V: RNCC: 5 | RNVC: 2

24 Jul 1991

4730-14-423-7337
Sediment Strainer Element

144237337
0320167050: RNCC: 3 | RNVC: 2

28 Apr 1988

4730-14-474-9713
Filler Cap Adapter Assembly

144749713
CR444396: RNCC: 3 | RNVC: 2
444396: RNCC: 5 | RNVC: 2

16 Mar 1995

4730-14-293-2803
Tube-Hose Fitting Compression Sleeve

142932803
40120A420: RNCC: 3 | RNVC: 2
32885: RNCC: 5 | RNVC: 1
40120A420: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-346-4567
Fluid Passage Bolt

143464567
DLT012948: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-547-4983
Pipe Flange

145474983
5450202: RNCC: 3 | RNVC: 2

14 Oct 2005

4730-14-381-2967
Tube To Boss Straight Adapter

143812967
601439: RNCC: 3 | RNVC: 2
00601439: RNCC: 5 | RNVC: 2

25 Jan 1983

4730-14-381-2614
Fluid Pressure Line Multiple Connector

143812614
5156101900: RNCC: 3 | RNVC: 2
561019: RNCC: 5 | RNVC: 2

25 Jan 1983

4730-14-399-1543
Fluid Pressure Line Multiple Connector

143991543
78C210: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-337-6803
Quick Disconnect Coupling Half

143376803
000571282S: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-513-8336
Quick Disconnect Coupling Half

145138336
1526473: RNCC: 3 | RNVC: 2

14 Apr 1999

4730-14-562-5279
Tube To Boss Elbow

145625279
3199 08 21: RNCC: 3 | RNVC: 2
FS0002371: RNCC: 6 | RNVC: 9

3 Nov 2009

4730-14-576-0577
Flange To Tube Elbow

145760577
M2821308200000: RNCC: 3 | RNVC: 2

28 May 2013

4730-14-322-2133

4730-14-342-6011

4730-14-319-5706
Tube Fitting Brazing Ferrule

143195706
HM44213: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-563-6574
Self-Sealing Coupling Half

145636574
A05051501: RNCC: 3 | RNVC: 2

3 Mar 2010

4730-14-309-4579
Tube Tee

143094579
130CU12: RNCC: 3 | RNVC: 2
130C12: RNCC: 3 | RNVC: 9
130CU12: RNCC: 5 | RNVC: 9
130T12: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-374-7771
Tube Tee

143747771
0000363150: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-357-1082
Tube To Boss Straight Adapter

143571082
0677002: RNCC: 3 | RNVC: 2

7 Jun 1979

4730-14-270-3219
Bague Speciale

142703219
86055: RNCC: 3 | RNVC: 2
9567157620: RNCC: 5 | RNVC: 2
86055: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-349-4858
Tube To Boss Straight Adapter

143494858
180-18E: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-508-6387
Solder Type Tube Fitting Plug

145086387
K15241PC572A: RNCC: 3 | RNVC: 2
K15241PC500AREP72: RNCC: 5 | RNVC: 2

23 Sep 1998

4730-14-536-0858
Tube Tee

145360858
770133104: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-508-8108
Tube Tee

145088108
01452727: RNCC: 3 | RNVC: 2
19203303: RNCC: 5 | RNVC: 9

30 Sep 1998

4730-14-474-1699
Sediment Strainer Element

144741699
100-38DIA10AC: RNCC: 3 | RNVC: 2

1 Feb 1995

4730-14-502-2178
Lubrication Fitting

145022178
E7413716: RNCC: 3 | RNVC: 9

26 Nov 1997

4730-14-277-3623
Fluid Pressure Line Multiple Connector

142773623
0000300220: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-508-1976
Adapter And Flange Assembly

145081976
MTFLXM9004600AABABORD: RNCC: 3 | RNVC: 2
SAV149: RNCC: 5 | RNVC: 2

28 Aug 1998

4730-14-357-7204
Tube To Boss Straight Adapter

143577204
9101066030: RNCC: 3 | RNVC: 2

20 Jul 1979

4730-14-441-0374
Tube To Boss Straight Adapter

144410374
G04719: RNCC: 3 | RNVC: 2
3704-89: RNCC: 5 | RNVC: 2

16 Aug 1990

4730-14-500-6329
Tube To Boss Straight Adapter

145006329
E64209011000: RNCC: 3 | RNVC: 2
F300 0T 024 6515: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-430-6422
Tube To Boss Straight Adapter

144306422
PM1A533140103: RNCC: 3 | RNVC: 2
PM1A533140103: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-515-2681
Tube To Boss Straight Adapter

145152681
9721002058: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-375-7135
Tube To Boss Straight Adapter

143757135
8159141766: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-372-3048
Quick Disconnect Coupling Assembly

143723048
9959178: RNCC: 3 | RNVC: 2
VDP7578: RNCC: 5 | RNVC: 2

1 Sep 1981

4730-14-400-9507
Bulkhead Hose Connector

144009507
DA2C203520610A2: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-360-2276
Tube Tee

143602276
16296155: RNCC: 3 | RNVC: 2
16296155: RNCC: 5 | RNVC: 9

23 Nov 1979

4730-14-527-4639
Tube Coupling

145274639
5005130005: RNCC: 3 | RNVC: 2

25 Oct 2001

4730-14-463-2339
Fluid Pressure Line Multiple Connector

144632339
LN326063F13: RNCC: 3 | RNVC: 2

2 Jun 1993

4730-14-397-7833
Tube To Boss Straight Adapter

143977833
A37810: RNCC: 3 | RNVC: 2

28 Jan 1985

4730-14-399-1213
Tube To Boss Straight Adapter

143991213
5000783668: RNCC: 3 | RNVC: 2
5000783668: RNCC: 5 | RNVC: 9
F300 0T 003 2601: RNCC: 6 | RNVC: 9

6 Mar 1985

4730-14-426-7715
Tube Tee

144267715
4730HEING060,3X5,6-33,7X4,5: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-462-4033
Fluid Passage Bolt

144624033
Z93018513: RNCC: 3 | RNVC: 2

15 Apr 1993

4730-14-553-9001
Fluid Flow Restrictor

145539001
353 117: RNCC: 3 | RNVC: 2
353 117: RNCC: 3 | RNVC: 2

29 May 2007

4730-14-506-6334
Tube To Boss Straight Adapter

145066334
004537506W: RNCC: 3 | RNVC: 2

30 Apr 1998

4730-14-265-9403
Collier

142659403
DLT006505: RNCC: 3 | RNVC: 2
DLT006505: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-233-6883

4730-14-567-4646
Union Tailpiece

145674646
0292760420: RNCC: 3 | RNVC: 2

17 Mar 2011

4730-14-273-5152

4730-14-515-4400
Tube To Boss Straight Adapter

145154400
BPC0UDEMC34FG3490IN0X: RNCC: 3 | RNVC: 2
SOABPC0UDEMC34FG3490IN0X: RNCC: 5 | RNVC: 9

13 Jul 1999

4730-14-411-6541
Fluid Pressure Line Multiple Connector

144116541
109054: RNCC: 3 | RNVC: 2

27 Aug 1986

4730-14-252-6366

4730-14-340-8939

4730-14-339-7921

4730-14-434-8010
Tube To Boss Straight Adapter

144348010
PE69001K10: RNCC: 3 | RNVC: 2

4 Oct 1989

4730-14-383-2612
Sediment Strainer Element

143832612
250-50-6X30CQ: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-262-9902
Pipe Flange

142629902
DLT006382: RNCC: 3 | RNVC: 2
DLT006382: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-458-2112
Sediment Strainer Element

144582112
S-9105: RNCC: 3 | RNVC: 2

13 Oct 1992

4730-14-371-0456
Tube To Boss Straight Adapter

143710456
8159202199: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-400-2458
Tube To Boss Straight Adapter

144002458
0000251840: RNCC: 3 | RNVC: 2

24 Apr 1985

4730-14-323-5829
Tube-Hose Fitting Compression Sleeve

143235829
01241400: RNCC: 3 | RNVC: 2
1241400: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-354-0735
Fluid Pressure Line Multiple Connector

143540735
515017: RNCC: 3 | RNVC: 2

16 Jan 1979

4730-14-378-9009

4730-14-407-0792
Pipe Flange

144070792
98014950: RNCC: 3 | RNVC: 2

29 Jan 1986

4730-14-382-8804
Tube Coupling

143828804
PE40001K12: RNCC: 3 | RNVC: 2

2 Aug 2000

4730-14-520-0863
Bulkhead Hose Connector

145200863
RA1M592304191: RNCC: 3 | RNVC: 2

10 May 2000

4730-14-562-1894
Hose Tee

145621894
3104 04 06: RNCC: 3 | RNVC: 2
FS0002470: RNCC: 6 | RNVC: 9

6 Oct 2009

4730-14-576-7543
Hose Nipple

145767543
RA.12.14.14: RNCC: 3 | RNVC: 2

10 Jul 2013

4730-14-325-7201
Fluid Pressure Line Multiple Connector

143257201
103087250101: RNCC: 3 | RNVC: 2
103087250101: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-409-3768
Tube-Hose Fitting Compression Sleeve

144093768
33811113: RNCC: 3 | RNVC: 2
TU017N80: RNCC: 5 | RNVC: 2
376525X1: RNCC: 5 | RNVC: 9

28 May 1986

4730-14-552-0357
Tube To Boss Straight Adapter

145520357
0000311770: RNCC: 3 | RNVC: 2

21 Nov 2006

4730-14-305-9257
Sediment Strainer Element

143059257
2019-7REP3: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-374-1401
Tube To Boss Straight Adapter

143741401
S3340CD: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-553-1335
Tube Fitting Socket Welded Ferrule

145531335
0177130040: RNCC: 3 | RNVC: 2

6 Mar 2007

4730-14-429-8107
Lubrication Fitting

144298107
1250090: RNCC: 3 | RNVC: 2
91701178: RNCC: 5 | RNVC: 2
5000288001: RNCC: 5 | RNVC: 2

13 Feb 1989

4730-14-345-0201
Tube To Boss Straight Adapter

143450201
3200981: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-367-0286

4730-14-524-8051
Quick Disconnect Coupling Half

145248051
9A87 01 17X099: RNCC: 3 | RNVC: 2
9A87 01 17X099: RNCC: 5 | RNVC: 2

18 Apr 2001

4730-14-543-8010
Tube To Boss Straight Adapter

145438010
9321546: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-311-9418
Tube Tee

143119418
16296197: RNCC: 3 | RNVC: 2
16296197: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-260-9841
Tube Coupling Assembly

142609841
3951S25X25X16A: RNCC: 3 | RNVC: 2
3951S25X25X16A: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-522-7908
Hose To Grooved Clamp Coupling Straight Adapter

145227908
EBB4/8: RNCC: 3 | RNVC: 2
EBB4/8: RNCC: 5 | RNVC: 9

23 Nov 2000

4730-14-372-1285
Air Hose Connector

143721285
3103: RNCC: 3 | RNVC: 2
45390-3: RNCC: 5 | RNVC: 2
322070: RNCC: 5 | RNVC: 2

1 Sep 1981

4730-14-575-9874
Tube Elbow

145759874
XBWSV 16 S AVEC GM ZN FER NOIR: RNCC: 3 | RNVC: 2
109788N: RNCC: 5 | RNVC: 2
4295.701: RNCC: 5 | RNVC: 2
Y00014168: RNCC: 5 | RNVC: 2

22 May 2013

4730-14-328-9598
Tube To Boss Straight Adapter

143289598
411MA0074F12REP4: RNCC: 3 | RNVC: 2
411MA074F12REP4: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-441-3361
Tube Fitting Socket Welded Ferrule

144413361
74445CC8: RNCC: 3 | RNVC: 2

22 Aug 1990

4730-14-211-1135
Fluid Passage Bolt

142111135
21708: RNCC: 3 | RNVC: 2
TID10420: RNCC: 5 | RNVC: 2
21708: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-421-7324
Fluid Pressure Line Multiple Connector

144217324
7N06-90MF: RNCC: 3 | RNVC: 2
0000302830: RNCC: 5 | RNVC: 2

27 Jan 1988

4730-14-402-1046
Pipe Flange

144021046
400819: RNCC: 3 | RNVC: 2
BGE400819: RNCC: 5 | RNVC: 2

26 Jun 1985

4730-14-511-9366
Pipe Flange

145119366
55500: RNCC: 3 | RNVC: 2

28 Jan 1999

4730-14-414-5772
Tube Tee

144145772
01041800: RNCC: 3 | RNVC: 2

11 Feb 1987

4730-14-400-8175
Fluid Pressure Line Multiple Connector

144008175
F7N08MVT: RNCC: 3 | RNVC: 2
9560137270: RNCC: 5 | RNVC: 2

21 May 1985

4730-14-430-6445
Flange To Tube Elbow

144306445
PM1A543100006: RNCC: 3 | RNVC: 2
PM1A543100006: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-474-2313
Tube Repair Plug

144742313
H47300005AA: RNCC: 3 | RNVC: 2

3 Feb 1995

4730-14-463-9200
Tube To Boss Straight Adapter

144639200
417934: RNCC: 3 | RNVC: 9
RAR1629: RNCC: 5 | RNVC: 2

6 Jul 1993

4730-14-324-1037
Sediment Strainer Element

143241037
466-9M7P28: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-396-2814
Tube Tee

143962814
EVT22PLM: RNCC: 3 | RNVC: 2
EVT22LM: RNCC: 5 | RNVC: 2
EVT22LM: RNCC: 5 | RNVC: 2
EVT22LM: RNCC: 5 | RNVC: 9

27 Nov 1984

4730-14-481-0903
Tube To Boss Straight Adapter

144810903
717.T.20.27X1,50: RNCC: 3 | RNVC: 2
P156T20: RNCC: 3 | RNVC: 2
717T20: RNCC: 5 | RNVC: 2
74717T20: RNCC: 5 | RNVC: 2
717 T 20 27X1,50: RNCC: 5 | RNVC: 2
74717T20: RNCC: 5 | RNVC: 2

18 Apr 1996

4730-14-540-3300
Tube Fitting Brazing Ferrule

145403300
NNP5365840019620: RNCC: 3 | RNVC: 2

18 Mar 2004

4730-14-494-5528
Tube To Boss Straight Adapter

144945528
643 459 20: RNCC: 3 | RNVC: 2
F300 0T 017 4707: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-373-0805
Tube Tee

143730805
31080613: RNCC: 3 | RNVC: 2
222-9562: RNCC: 5 | RNVC: 2

21 Sep 1981

4730-14-444-3300
Quick Disconnect Coupling Assembly

144443300
DV-1023: RNCC: 3 | RNVC: 9
0860867T00: RNCC: 5 | RNVC: 2

8 Jan 1991

4730-14-301-1052
Tube To Boss Straight Adapter

143011052
330A76-0789-00: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-376-5375
Tube To Boss Straight Adapter

143765375
NO PRIMARY REF14-376-5375: RNCC: 3 | RNVC: 2
454188270: RNCC: 5 | RNVC: 2
454188270: RNCC: 5 | RNVC: 9
454188270: RNCC: 5 | RNVC: 9

28 Apr 1982

4730-14-495-4333
Tube To Hose Straight Adapter

144954333
0180 04 00: RNCC: 3 | RNVC: 2
N35432-08: RNCC: 5 | RNVC: 2
F300 0T 019 2568: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-459-0074
Filler Cap Adapter Assembly

144590074
99638020201: RNCC: 3 | RNVC: 2
316247-00: RNCC: 5 | RNVC: 2

11 Nov 1992

4730-14-320-2059
Tube To Boss Straight Adapter

143202059
Q1-5204JC10-12-17CYL: RNCC: 3 | RNVC: 2
ORK10X12-17N: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-371-8609
Tube Coupling

143718609
B0363-002: RNCC: 3 | RNVC: 2

5 Aug 1981

4730-14-468-3102
Tube To Boss Straight Adapter

144683102
0144501000: RNCC: 3 | RNVC: 2
144501: RNCC: 5 | RNVC: 2
LV154-CS0604S: RNCC: 5 | RNVC: 2
J50201: RNCC: 5 | RNVC: 2
RAB2838: RNCC: 5 | RNVC: 2
AQAJ50201: RNCC: 5 | RNVC: 2
UFA6X8.13S: RNCC: 5 | RNVC: 2
J50201: RNCC: 5 | RNVC: 2

18 Feb 1994

4730-14-494-8255
Fluid Pressure Line Multiple Connector

144948255
NO PRIMARY REF14-494-8255: RNCC: 3 | RNVC: 2
504887: RNCC: 5 | RNVC: 9
F300 0T 017 9514: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-290-2507
Bulkhead Hose Connector

142902507
330A32-1188-20: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-387-8463
Pipe Flange

143878463
NO PRIMARY REF14-387-8463: RNCC: 3 | RNVC: 2
0005-701DN25: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-423-4379
Pipe Flange

144234379
UA50088006PN250-11D1DN32: RNCC: 2 | RNVC: 2
4730HCPN250DN03211D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-404-2909
Quick Disconnect Coupling Half

144042909
CROQ4-85BECNMACHN: RNCC: 3 | RNVC: 2

18 Sep 1985

4730-14-258-3564

4730-14-280-4269
Fluid Passage Bolt

142804269
0202000810: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-272-4363
Sediment Strainer Element

142724363
506697: RNCC: 3 | RNVC: 9

1 Jan 1971

4730-14-273-5272
Pipe Flange

142735272
7062SC1F1F171UA9NFEM: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-287-7908
Pipe Flange

142877908
RUAN7625M913P12D: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-452-6731
Hydraulic Swivel Joint

144526731
D59255: RNCC: 3 | RNVC: 2

15 Jan 1992

4730-14-278-2106
Fluid Passage Bolt

142782106
AC40143: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-395-3761
Tube To Boss Straight Adapter

143953761
N0188F16A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-382-4079
Pipe Flange

143824079
44348: RNCC: 3 | RNVC: 9

17 Feb 1983

4730-14-571-5825
Tube Reducer

145715825
7421558951: RNCC: 1 | RNVC: 2
81106900: RNCC: 3 | RNVC: 2
21558951: RNCC: 5 | RNVC: 2

11 Apr 2012

4730-14-269-2097

4730-14-567-8310
Flange To Pipe Elbow

145678310
M2821336200000: RNCC: 3 | RNVC: 2

14 Apr 2011

4730-14-333-4195
Fluid Passage Bolt

143334195
F10A200000629: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-426-9034
Clapet

144269034
DLT079818B: RNCC: 3 | RNVC: 2

28 Sep 1988

4730-14-533-4881
Tube-Pipe Fitting Kit

145334881
61022188AA00: RNCC: 3 | RNVC: 2

5 Feb 2003

4730-14-552-9306
Pipe To Gas Fitting Straight Adapter

145529306
500328152: RNCC: 3 | RNVC: 2
0028069: RNCC: 5 | RNVC: 2

14 Feb 2007

4730-14-295-1157
Threaded Tube Fitting Plug

142951157
279393: RNCC: 3 | RNVC: 2
279393: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-399-1214
Fluid Pressure Line Multiple Connector

143991214
5000783672: RNCC: 3 | RNVC: 2
5000783672: RNCC: 6 | RNVC: 9

6 Mar 1985

4730-14-388-4601
Pipe Flange

143884601
02103011100: RNCC: 3 | RNVC: 2
021030111: RNCC: 5 | RNVC: 2

3 Nov 1983

4730-14-032-0747
Tu Droit Adaptateur

4730-14-462-0307
Tube To Boss Straight Adapter

144620307
A82555: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-350-7867
Quick Disconnect Coupling Assembly

143507867
SDS0-100BCD: RNCC: 3 | RNVC: 2
85-689-7534: RNCC: 6 | RNVC: 9

12 Jul 1978

4730-14-393-1474
Tube To Boss Straight Adapter

143931474
BP2-14-12-17CO: RNCC: 3 | RNVC: 2

12 Apr 1984

4730-14-336-4058
Fluid Pressure Line Multiple Connector

143364058
341A75-2011-20: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-480-1678
Exhaust-Intake Pneumatic Muffler

144801678
VTSL00010: RNCC: 3 | RNVC: 2

23 Feb 1996

4730-14-444-3226
Tube Coupling

144443226
301240: RNCC: 3 | RNVC: 2

7 Jan 1991

4730-14-500-1279
Tube To Boss Straight Adapter

145001279
1670972M1: RNCC: 3 | RNVC: 2
F300 0T 024 1291: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-369-6256
Tube Tee

143696256
1464-40-72: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-323-4803
Fuel Feeder Manifold

143234803
0265167090: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-360-1341
Tube To Boss Straight Adapter

143601341
H43002077REP2: RNCC: 3 | RNVC: 2
ADA39278REP53: RNCC: 5 | RNVC: 2

31 Oct 1979

4730-14-402-1306
Fluid Pressure Line Multiple Connector

144021306
72257: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-335-9355
Tube Tee

143359355
R6X12X12L: RNCC: 3 | RNVC: 2

24 Jul 1976

4730-14-420-3207
Fluid Pressure Line Multiple Connector

144203207
DLT024766: RNCC: 3 | RNVC: 2
RAR1396: RNCC: 5 | RNVC: 2

30 Nov 1987

4730-14-458-5153
Swivel Flange To Hose Straight Adapter

144585153
L328017: RNCC: 3 | RNVC: 2
91630510: RNCC: 5 | RNVC: 2
DBAL328017: RNCC: 5 | RNVC: 9

23 Oct 1992

4730-14-449-9981
Fluid Pressure Line Multiple Connector

144499981
5000540012: RNCC: 3 | RNVC: 2
5000540012: RNCC: 5 | RNVC: 9

18 Sep 1991

4730-14-414-0643
Self-Sealing Coupling Half

144140643
96150393: RNCC: 3 | RNVC: 2

22 Jan 1987

4730-14-528-6026
Quick Disconnect Coupling Half

145286026
N00712578: RNCC: 3 | RNVC: 2

30 Jan 2002

4730-14-578-0981
Flange To Hose Elbow

145780981
0292720670: RNCC: 3 | RNVC: 2

30 Oct 2013

4730-14-256-0570
Croix Vabco

142560570
CB14UA9M2: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-296-7137

4730-14-221-2875

4730-14-281-1945

4730-14-289-7736
Self-Sealing Coupling Assembly

142897736
15066468-714V120: RNCC: 3 | RNVC: 2
15066468-714V1: RNCC: 5 | RNVC: 2
96092486: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-402-9816
Quick Disconnect Reducer

144029816
RBE11-8650: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-507-1595
Bulkhead Hose Connector

145071595
87171034-KDLSG-24/4: RNCC: 3 | RNVC: 2
87171034-KDLSG-24/4: RNCC: 5 | RNVC: 2
KD/SG24/4N87171034: RNCC: 5 | RNVC: 2

17 Jun 1998

Load More Results