What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 109 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 109 of 185

4730-14-246-1845
Fluid Pressure Line Multiple Connector

142461845
50616: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-573-8561
Hose Reducer

145738561
1/4X1/8FG43B: RNCC: 3 | RNVC: 2

15 Nov 2012

4730-14-245-9044
Distributeur Cinq V

142459044
NU504: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-365-9834

4730-14-307-3885

4730-14-303-9356

4730-14-432-1613
Embout Male

144321613
S2125: RNCC: 3 | RNVC: 2

24 May 1989

4730-14-577-4174
Tube Fitting Socket Welded Ferrule

145774174
82729991000: RNCC: 3 | RNVC: 2

13 Sep 2013

4730-14-307-7869

4730-14-333-6896

4730-14-237-5334
Raccord Special

142375334
400610: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-390-3305
Raccord Souple Equi

143903305
21985: RNCC: 3 | RNVC: 2
DLT030608: RNCC: 5 | RNVC: 2

26 Jan 1984

4730-14-353-7506
Assembles Raccords

143537506
A11A221274190: RNCC: 3 | RNVC: 2

16 Jan 1979

4730-14-202-1641
Tube To Boss Swivel Joint

142021641
56055Z: RNCC: 3 | RNVC: 2
9567120070: RNCC: 5 | RNVC: 2

1 Jan 1963

4730-14-252-1674
Fluid Pressure Line Multiple Connector

142521674
80333: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-218-3071

4730-14-565-6840
Tube To Hose Tee

145656840
PE65418E101008: RNCC: 3 | RNVC: 2

15 Sep 2010

4730-14-042-4212

4730-14-307-8444
Tubulure Speciale

143078444
B252FD1BREP3: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-549-4663
Tube To Boss Swivel Joint

145494663
0000302850: RNCC: 3 | RNVC: 2

6 Apr 2006

4730-14-549-4661
Tube Union

145494661
0000280720: RNCC: 3 | RNVC: 2

6 Apr 2006

4730-14-325-9045
Pipe Flange

143259045
AS34TV104REP5: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-537-3683
Swivel Flange To Hose Connector

145373683
359-5528: RNCC: 3 | RNVC: 2

27 Oct 2003

4730-14-512-0538
Return Tube Bend

145120538
0062085: RNCC: 3 | RNVC: 2

3 Feb 1999

4730-14-509-1037
Tube To Boss Straight Adapter

145091037
00132992: RNCC: 3 | RNVC: 2
1211: RNCC: 5 | RNVC: 9

21 Oct 1998

4730-14-272-4262
Tube Coupling

142724262
R20667: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-444-2628
Fluid Pressure Line Multiple Connector

144442628
109-12JE18X150TF: RNCC: 3 | RNVC: 2
91636714: RNCC: 5 | RNVC: 2

20 Dec 1990

4730-14-274-6593
Tube-Hose Fitting Compression Sleeve

142746593
7062BA1BT1-30UE10R1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-404-4032
Tube Tee

144044032
T0535FF: RNCC: 3 | RNVC: 2

30 Oct 1985

4730-14-418-8821
Bulkhead Hose Connector

144188821
DA1D722200007: RNCC: 3 | RNVC: 2

16 Sep 1987

4730-14-424-6619
Quick Disconnect Coupling Half

144246619
5000267073: RNCC: 3 | RNVC: 2
89409908: RNCC: 5 | RNVC: 2

2 Jun 1988

4730-14-491-8677
Fluid Passage Bolt

144918677
103: RNCC: 3 | RNVC: 2
F300 0T 005 7615: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-521-2600
Exhaust-Intake Pneumatic Muffler

145212600
1827000001: RNCC: 3 | RNVC: 2
SYB0991: RNCC: 5 | RNVC: 2

13 Jul 2000

4730-14-553-1325
Tube Fitting Socket Welded Ferrule

145531325
0025940020: RNCC: 3 | RNVC: 2

6 Mar 2007

4730-14-489-8275
Tube To Boss Straight Adapter

144898275
E4750324: RNCC: 3 | RNVC: 9

22 Aug 1997

4730-14-216-0286
Fluid Passage Bolt

142160286
50639: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-540-7286
Anchor And Reinforcement Pipe Clamp

145407286
38051363: RNCC: 3 | RNVC: 2
437393: RNCC: 5 | RNVC: 2
4848ZG8613181176: RNCC: 6 | RNVC: 9

22 Apr 2004

4730-14-426-6619
Tube To Boss Straight Adapter

144266619
4MA2: RNCC: 3 | RNVC: 2
91517841: RNCC: 5 | RNVC: 2
118200: RNCC: 5 | RNVC: 2

15 Sep 1988

4730-14-538-2237
Return Tube Bend

145382237
NGM0010033011038: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-397-8466
Quick Disconnect Coupling Half

143978466
13 321 47: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-499-6906
Tube To Boss Straight Adapter

144996906
507556: RNCC: 3 | RNVC: 2
F300 0T 023 6764: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-477-0710
Flexible Tube Coupling Assembly

144770710
T700A2499000004: RNCC: 3 | RNVC: 2

19 Jul 1995

4730-14-528-6027
Quick Disconnect Coupling Half

145286027
N00519593: RNCC: 3 | RNVC: 2

30 Jan 2002

4730-14-382-8808
Tube To Boss Straight Adapter

143828808
PE40201K06: RNCC: 3 | RNVC: 2

2 Aug 2000

4730-14-352-8280
Tube Tee

143528280
R16X10X16: RNCC: 3 | RNVC: 2

14 Nov 1978

4730-14-226-5295
Fluid Passage Bolt

142265295
0000324155: RNCC: 3 | RNVC: 2
0000324155: RNCC: 5 | RNVC: 9
324155: RNCC: 5 | RNVC: 9
T24469: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-397-4785
Tube To Boss Straight Adapter

143974785
005660005P: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-040-6754
Tube Coupling Assembly

140406754
3601S8A: RNCC: 3 | RNVC: 2
3601S8A: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-488-9283
Tube Union

144889283
MAT164-0308F2: RNCC: 2 | RNVC: 2

11 Jun 1997

4730-14-276-2046
Tube Fitting Brazing Ferrule

142762046
6784-1DB63-28: RNCC: 2 | RNVC: 2
MEC11394: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-344-7060
Tube To Boss Straight Adapter

143447060
EA1M752-002: RNCC: 3 | RNVC: 2

9 Sep 1977

4730-14-217-6648
Bouchon Filete Vida

142176648
5861: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-333-1398
Tube Coupling

143331398
677-310-016-0: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-423-4133
Pipe Flange

144234133
UA50088006PN50-11C1DN300: RNCC: 2 | RNVC: 2
4730HCPN50DN30011C1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-306-0224
Quick Disconnect Coupling Assembly

143060224
SJS03-60X63: RNCC: 3 | RNVC: 2

28 May 1997

4730-14-254-2640
Tube To Boss Straight Adapter

142542640
G12-27-26-34CYLNU: RNCC: 3 | RNVC: 2
UMAG27X26-34NNU: RNCC: 3 | RNVC: 2
MG27V33: RNCC: 3 | RNVC: 2
00375-78: RNCC: 5 | RNVC: 2
V00375-78: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-460-3604
Tube To Boss Straight Adapter

144603604
0177842000: RNCC: 3 | RNVC: 2
91725945: RNCC: 5 | RNVC: 2
LV126-CS1508L: RNCC: 5 | RNVC: 9

21 Jan 1993

4730-14-523-0362
Tube Coupling

145230362
08221: RNCC: 3 | RNVC: 2

20 Dec 2000

4730-14-273-5340
Pipe Flange

142735340
7062TC1F1M57UA9NFEM: RNCC: 2 | RNVC: 2
4730CE-57M: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-308-8339

4730-14-492-7985
Union

144927985
4K8569: RNCC: 3 | RNVC: 2
F300 0T 008 8399: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-263-7334

4730-14-268-6657
Demi-Raccord A Demo

142686657
1317-6-98: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-561-9305
Flange To Hose Straight Adapter

145619305
F00349988: RNCC: 3 | RNVC: 2

17 Sep 2009

4730-14-569-0832
Exhaust-Intake Pneumatic Muffler

145690832
0682 00 21: RNCC: 3 | RNVC: 2

5 Aug 2011

4730-14-366-8535

4730-14-493-8096
Union

144938096
J38203: RNCC: 3 | RNVC: 2
F300 0T 014 1076: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-367-7952
Quick Disconnect Coupling Half

143677952
S2179CD: RNCC: 3 | RNVC: 2

19 Jan 1981

4730-14-266-2674
Tube To Boss Straight Adapter

142662674
81136: RNCC: 3 | RNVC: 2
81136: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-395-7124
Tube To Boss Straight Adapter

143957124
9936301000: RNCC: 3 | RNVC: 2

30 Oct 1984

4730-14-546-5271
Return Tube Bend

145465271
EW12LOMDCF: RNCC: 3 | RNVC: 2
5010596385: RNCC: 5 | RNVC: 2

18 Jul 2005

4730-14-525-6330
Hose To Boss Straight Adapter

145256330
20 236 916 1150: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-480-1744
Quick Disconnect Coupling Half

144801744
1022.123: RNCC: 3 | RNVC: 2
EA20302: RNCC: 5 | RNVC: 2

23 Feb 1996

4730-14-474-4554
Support

144744554
508992: RNCC: 3 | RNVC: 2

15 Feb 1995

4730-14-324-4945
Rallonge De Graissa

143244945
A61046R3: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-220-6285

4730-14-334-2639

4730-14-347-8596
Tube To Boss Straight Adapter

143478596
12-8-12-17C0NU: RNCC: 3 | RNVC: 2
RT11325-6: RNCC: 5 | RNVC: 2
P4-12-8-12-17C0NU: RNCC: 5 | RNVC: 2

1 Mar 1978

4730-14-541-7813
Hose To Boss Straight Adapter

145417813
23827185-00: RNCC: 3 | RNVC: 2
23827185-7: RNCC: 5 | RNVC: 2

26 Jun 2004

4730-14-507-7102

4730-14-509-4516

4730-14-573-0096
Pipe Exhaust Head

145730096
91439: RNCC: 3 | RNVC: 2

3 Sep 2012

4730-14-561-8018
Tube Union

145618018
GE28LMEDOMDCF: RNCC: 3 | RNVC: 2
40006354: RNCC: 5 | RNVC: 2
GE28LMEDOMDCF: RNCC: 5 | RNVC: 9

8 Sep 2009

4730-14-395-3250
Tube Union

143953250
AFY270 3-4: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-417-3264
Raccord De Sortie P

4730-14-225-0614
Repartiteur Une Voi

142250614
479P411: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-493-9642
Union

144939642
360645047: RNCC: 3 | RNVC: 9
F300 0T 014 7836: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-362-2283
Fluid Pressure Line Multiple Connector

143622283
D51682: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-340-6387
Quick Disconnect Coupling Assembly

143406387
8200913: RNCC: 3 | RNVC: 2
8200913: RNCC: 5 | RNVC: 9

14 Feb 1977

4730-14-312-9000
Solder Type Tube Fitting Plug

143129000
0268700460: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-563-3863
Hose Clamp

145633863
50VAX03290002: RNCC: 3 | RNVC: 2

3 Feb 2010

4730-14-563-6007
Tube Union

145636007
05C311: RNCC: 3 | RNVC: 2

24 Feb 2010

4730-14-306-7529
Raccord Special Ver

143067529
C53920: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-308-1046

4730-14-261-3905
Raccord Special

142613905
103820: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-313-4891
Bride Support Plein

143134891
401MA0375REP12: RNCC: 3 | RNVC: 2
401MA375REP12: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-263-7544
Coude Bronze

142637544
42634: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-209-6157
Coude Special

142096157
15112824: RNCC: 3 | RNVC: 2
M112824: RNCC: 5 | RNVC: 2
112824: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-330-6537

4730-14-031-1241
Sedi Filtre Support

140311241
755164180: RNCC: 3 | RNVC: 2
755164180: RNCC: 3 | RNVC: 2
75516414: RNCC: 5 | RNVC: 2

14 Jun 1980

4730-14-261-5586

4730-14-289-1233
Bride De Manoeuvre

142891233
401MA0021REP8: RNCC: 3 | RNVC: 2
401MA021REP8: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-327-5103

4730-14-366-5996

4730-14-250-0690

4730-14-561-6056
Tube Tee

145616056
10R6MLOS: RNCC: 3 | RNVC: 2
20 236 911 2240: RNCC: 5 | RNVC: 2

4 Aug 2009

4730-14-525-5821
Tube To Boss Straight Adapter

145255821
10 146 060 1080: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-210-6862
Fluid Passage Bolt

142106862
0000467246: RNCC: 3 | RNVC: 2
0000467246: RNCC: 5 | RNVC: 9
467246: RNCC: 5 | RNVC: 9

1 Jan 1964

4730-14-452-5586
Pipe Flange

144525586
LN320033F26DN50: RNCC: 3 | RNVC: 2

13 Jan 1992

4730-14-409-6999
Tuyau Collier

4730-14-494-5516
Tube To Boss Straight Adapter

144945516
643 449 202: RNCC: 3 | RNVC: 2
F300 0T 017 4695: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-536-0443
Bulkhead Hose Connector

145360443
PE65001D16: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-516-9448
Swivel Retaining Pipe Flange

145169448
MD215400: RNCC: 3 | RNVC: 2

28 Oct 1999

4730-14-326-8330
Tube To Boss Straight Adapter

143268330
91011017: RNCC: 3 | RNVC: 2
A3-10-12-17CYL: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-450-5460
Tube To Boss Straight Adapter

144505460
F6XS32-1,1/4: RNCC: 3 | RNVC: 2
91712755: RNCC: 5 | RNVC: 2

9 Oct 1991

4730-14-032-3084
Tube To Boss Straight Adapter

140323084
4730AJ4.3DN10EQUIPE: RNCC: 2 | RNVC: 2
8901101366: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-376-9288

4730-14-287-7339
Bride Detancheite

142877339
13614120G: RNCC: 3 | RNVC: 2
61412: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-248-1049

4730-14-330-6533

4730-14-264-1688
Tube To Boss Straight Adapter

142641688
0000250420: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-274-1856
Tube To Boss Straight Adapter

142741856
DM45: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-539-3635
Flange To Hose Elbow

145393635
0110570: RNCC: 3 | RNVC: 2

8 Jan 2004

4730-14-328-2577
Tube Coupling

143282577
ZA29C9XM: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-519-6443
Tube To Boss Straight Adapter

145196443
98641000222: RNCC: 3 | RNVC: 2

29 Mar 2000

4730-14-406-7549
Tube Tee

144067549
T27: RNCC: 3 | RNVC: 2

8 Jan 1986

4730-14-278-8137

4730-14-223-8682

4730-14-324-1306

4730-14-554-4213
Quick Disconnect Coupling Half

145544213
461735: RNCC: 3 | RNVC: 2

4 Jul 2007

4730-14-253-8468
Corps De Raccord Do

142538468
24048001600: RNCC: 3 | RNVC: 2
48J16: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-294-0675
Quick Disconnect Coupling Half

142940675
E29572B50BZ: RNCC: 2 | RNVC: 2
1020.129: RNCC: 3 | RNVC: 2
4245: RNCC: 3 | RNVC: 2
10 201 29: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-433-2811
Bulkhead Hose Connector

144332811
160H752622: RNCC: 3 | RNVC: 2

19 Jul 1989

4730-14-321-6618
Pipe Flange

143216618
0235250330: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-307-3983
Swivel Retaining Pipe Flange

143073983
DLT008671: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-265-9494
Sediment Strainer Element

142659494
0944171070: RNCC: 3 | RNVC: 2
0944171070: RNCC: 5 | RNVC: 9
944171070: RNCC: 5 | RNVC: 9
944171070: RNCC: 6 | RNVC: 9

1 Jan 1970

4730-14-393-1464
Tube-Hose Fitting Compression Sleeve

143931464
BPR14: RNCC: 3 | RNVC: 2

12 Apr 1984

4730-14-288-9019

4730-14-409-4120
Corps

144094120
3902871: RNCC: 3 | RNVC: 2

28 May 1986

4730-14-278-8200

4730-14-354-2015

4730-14-365-9405

4730-14-562-7268
Fluid Pressure Line Multiple Connector

145627268
WH12SMKDSOMDCF: RNCC: 3 | RNVC: 2
WH12SMKDSOMDCF: RNCC: 5 | RNVC: 9

18 Nov 2009

4730-14-269-2068

4730-14-479-2161
Flange To Hose Straight Adapter

144792161
23627020-3: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-548-0025
Reducing Tube Coupling Nut

145480025
DH 0458 41 68: RNCC: 3 | RNVC: 2

5 Dec 2005

4730-14-374-7764
Bulkhead Hose Connector

143747764
0000361880: RNCC: 3 | RNVC: 2

30 Jan 1982

4730-14-230-7163
Pipe Flange

142307163
GSM1487DET16: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-439-9633
Tube Coupling

144399633
39036935: RNCC: 3 | RNVC: 2

29 Jun 1990

4730-14-459-9066
Pipe Flange

144599066
10135218: RNCC: 3 | RNVC: 2
10172674REP12: RNCC: 5 | RNVC: 2

22 Dec 1992

4730-14-317-8161
Tube Tee

143178161
2229-379: RNCC: 3 | RNVC: 2
9569890370: RNCC: 5 | RNVC: 2
2229-379: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-363-1163
Pipe Flange

143631163
220941: RNCC: 3 | RNVC: 2

3 Apr 1980

4730-14-444-7759
Tube To Gas Fitting Straight Adapter

144447759
0RSA8X14-150DTCW12: RNCC: 3 | RNVC: 2
LW170CW6142N: RNCC: 5 | RNVC: 2

21 Jan 1991

4730-14-468-9445
Tube Tee

144689445
51.40.203.76: RNCC: 3 | RNVC: 2

30 Mar 1994

4730-14-555-6209
Blind Pipe Flange

145556209
9947501000: RNCC: 3 | RNVC: 2

3 Dec 2007

4730-14-573-1683
Tube To Boss Straight Adapter

145731683
82663922000: RNCC: 3 | RNVC: 2

19 Sep 2012

4730-14-247-2344
Bouchon Special

142472344
152079: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-570-1984
Tube Fitting Clinch Sleeve

145701984
P733244: RNCC: 3 | RNVC: 2
1KP504: RNCC: 5 | RNVC: 2

28 Nov 2011

4730-14-365-2809

4730-14-365-3416

4730-14-258-4059
Raccord Special

142584059
109-6Z245: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-374-3990
Tube To Boss Straight Adapter

143743990
7748: RNCC: 3 | RNVC: 9

8 Dec 1981

4730-14-528-3246
Flexible Tube Coupling Assembly

145283246
ES08A15RU22A90: RNCC: 3 | RNVC: 2

22 Jan 2002

4730-14-399-1542
Fluid Pressure Line Multiple Connector

143991542
78C470: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-043-0256
Tube Coupling

140430256
PE60001K18: RNCC: 3 | RNVC: 2

11 Aug 1982

4730-14-436-0708
Pipe Expansion Joint

144360708
DILATOFLEXKARCN-DN40PN10: RNCC: 3 | RNVC: 2

1 Dec 1989

4730-14-515-3744
Fluid Flow Restrictor

145153744
0420 3968: RNCC: 3 | RNVC: 2

13 Jul 1999

4730-14-508-9014
Straight Tubing Connector

145089014
H102874G: RNCC: 3 | RNVC: 2

7 Oct 1998

4730-14-447-5297
Hose To Gas Fitting Straight Adapter

144475297
4CM2978A: RNCC: 3 | RNVC: 2

28 May 1991

4730-14-562-2393
Hose Coupling

145622393
RF100: RNCC: 3 | RNVC: 2
FS0000306: RNCC: 6 | RNVC: 9

8 Oct 2009

4730-14-232-8863

4730-14-356-7687

4730-14-367-7241

4730-14-567-8313
Flange Elbow

145678313
M2821336500000: RNCC: 3 | RNVC: 2

14 Apr 2011

4730-14-423-6832

4730-14-379-7176

4730-14-296-2940
Pipe Flange

142962940
0257990010: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-345-1328
Fluid Passage Bolt

143451328
52S1202303: RNCC: 3 | RNVC: 2
52S1202303: RNCC: 5 | RNVC: 2

5 Oct 1977

4730-14-472-0930
Sediment Strainer Element

144720930
01000115A04100: RNCC: 3 | RNVC: 2
01000115A04100: RNCC: 3 | RNVC: 9
71000115A04100: RNCC: 5 | RNVC: 9

5 Oct 1994

4730-14-451-2307
Flange To Tube Elbow

144512307
PM1A726119121Q1: RNCC: 3 | RNVC: 2
PM1A726119121Q1: RNCC: 5 | RNVC: 2

6 Nov 1991

4730-14-286-4159
Fluid Pressure Line Multiple Connector

142864159
80422: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-395-3770
Tube To Gas Fitting Straight Adapter

143953770
N0189F64A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-489-0493
Quick Disconnect Coupling Half

144890493
300682: RNCC: 3 | RNVC: 2

18 Jun 1997

4730-14-244-6468
Tube Repair Plug

142446468
D33921: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-350-2963
Tube To Boss Straight Adapter

143502963
83615: RNCC: 3 | RNVC: 2
83615: RNCC: 5 | RNVC: 2

14 Jun 1978

4730-14-256-5477
Tube To Boss Straight Adapter

142565477
11216340Z: RNCC: 3 | RNVC: 2
21634: RNCC: 5 | RNVC: 2

1 Jan 1969

4730-14-279-7452
Fluid Pressure Line Multiple Connector

142797452
109-10Z130: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-552-0358
Tube To Boss Straight Adapter

145520358
0000311820: RNCC: 3 | RNVC: 2

21 Nov 2006

4730-14-415-3424
Tube To Gas Fitting Straight Adapter

144153424
34600005: RNCC: 3 | RNVC: 2

4 May 1987

4730-14-462-7163
Hose To Boss Straight Adapter

144627163
SBE1126: RNCC: 3 | RNVC: 2

28 Apr 1993

4730-14-461-7777
Hose Coupling Assembly

144617777
10039754: RNCC: 3 | RNVC: 2

24 Mar 1993

4730-14-353-3113
Tube To Boss Straight Adapter

143533113
052625: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-356-1119
Passage Diaphragme

143561119
R37175SMDIAPHRAGME: RNCC: 3 | RNVC: 2

5 Apr 1979

4730-14-564-0761
Fluid Passage Bolt

145640761
82423898000: RNCC: 3 | RNVC: 2

7 Apr 2010

4730-14-563-0043
Quick Disconnect Plug

145630043
4200006260: RNCC: 3 | RNVC: 2

14 Dec 2009

4730-14-556-9851
Pipe True Wye

145569851
000140: RNCC: 3 | RNVC: 2

25 Apr 2008

4730-14-568-9602
Tube Elbow

145689602
CDLS18: RNCC: 3 | RNVC: 2

22 Jul 2011

4730-14-200-8630

4730-14-247-4008

4730-14-261-7696

4730-14-262-7825
Embout De Grenaille

142627825
DLT013084: RNCC: 3 | RNVC: 2
DLT13084: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-474-1519
Flange To Hose Straight Adapter

144741519
1VTCM3-44: RNCC: 3 | RNVC: 2

31 Jan 1995

4730-14-527-2378
Sediment Strainer Element

145272378
01002466E50100: RNCC: 3 | RNVC: 9
SYQ0436: RNCC: 5 | RNVC: 2

16 Oct 2001

4730-14-307-0466
Tube Tee

143070466
561438: RNCC: 3 | RNVC: 2
5156143800: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-262-9384
Raccord A Souder

142629384
DM100: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-570-1977
Hose Coupling Nut

145701977
P733240: RNCC: 3 | RNVC: 2
1KP500: RNCC: 5 | RNVC: 2

28 Nov 2011

4730-14-218-8405
Tube To Boss Straight Adapter

142188405
0705252900: RNCC: 3 | RNVC: 2
7052529: RNCC: 5 | RNVC: 2

1 Jan 1965

4730-14-482-1242
Flange To Hose Straight Adapter

144821242
33 41 96: RNCC: 3 | RNVC: 2

20 Jun 1996

4730-14-531-6276
Branched Tubing Connector

145316276
TA5012P014: RNCC: 3 | RNVC: 2

4 Sep 2002

4730-14-511-6920
Tube Fitting Clinch Sleeve

145116920
1A8L: RNCC: 3 | RNVC: 2
101100008: RNCC: 5 | RNVC: 2
71100300: RNCC: 5 | RNVC: 2
5005030028: RNCC: 5 | RNVC: 2
0024387004: RNCC: 5 | RNVC: 9
0024248318: RNCC: 5 | RNVC: 9
242448318: RNCC: 5 | RNVC: 9
1A8L: RNCC: 5 | RNVC: 9
5516028077: RNCC: 5 | RNVC: 9
5516028077: RNCC: 5 | RNVC: 9

11 Jan 1999

4730-14-538-2345
Tube Coupling Assembly

145382345
NGM0010033655548: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-274-6603
Tube-Hose Fitting Compression Sleeve

142746603
7062CE1F2B48UE10R1: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-345-2589
Bulkhead Hose Connector

143452589
460315: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-207-4905

4730-14-525-7903
Tube To Boss Straight Adapter

145257903
F145308B: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-497-9381
Lubricant Pressure Relief Fitting

144979381
15540560N: RNCC: 3 | RNVC: 2

28 Oct 1997

4730-14-208-8172
Fluid Pressure Line Multiple Connector

142088172
0000101441: RNCC: 3 | RNVC: 2
101441: RNCC: 5 | RNVC: 9
0000101441: RNCC: 5 | RNVC: 9
101441: RNCC: 6 | RNVC: 9

1 Jan 1964

4730-14-576-0920
Tube To Boss Tee

145760920
RA1B726200061: RNCC: 3 | RNVC: 2

29 May 2013

4730-14-277-6218

4730-14-504-6910
Tube Coupling

145046910
2-099016-3: RNCC: 3 | RNVC: 2

27 Feb 1998

4730-14-339-1542
Tube To Boss Straight Adapter

143391542
1DM20 3-4BGS: RNCC: 3 | RNVC: 2

17 Dec 1976

4730-14-278-3115

4730-14-278-0936

4730-14-321-6712
Pipe Flange

143216712
0235551690: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-262-1636

4730-14-540-5427
Quick Disconnect Coupling Half

145405427
NNP4730870600517: RNCC: 3 | RNVC: 2

1 Apr 2004

4730-14-260-9292
Pipe Flange

142609292
7062DD1F1F48XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-500-8038
Tube To Boss Straight Adapter

145008038
E64602000003: RNCC: 3 | RNVC: 2
F300 0T 024 8238: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-302-2985
Tube To Boss Straight Adapter

143022985
000555282P: RNCC: 3 | RNVC: 2
0UT1-126: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-319-6479
Tube Fitting Clinch Sleeve

143196479
9124160050: RNCC: 3 | RNVC: 2
BCH16: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-491-0811
Tube To Boss Straight Adapter

144910811
1222-127: RNCC: 3 | RNVC: 2
F300 0T 001 3730: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-351-8386
Tube To Boss Straight Adapter

143518386
1538610008: RNCC: 3 | RNVC: 2
15386100: RNCC: 5 | RNVC: 2

16 Oct 1978

4730-14-559-4344
Tube To Boss Straight Adapter

145594344
252189591: RNCC: 3 | RNVC: 2

13 Jan 2009

4730-14-306-0436

4730-14-202-6527

4730-14-267-2542
Tube Tee

142672542
29516: RNCC: 3 | RNVC: 2
29516: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-479-9276
Fluid Pressure Line Multiple Connector

144799276
5010251511: RNCC: 3 | RNVC: 2

14 Feb 1996

4730-14-533-9756
Tube To Boss Swivel Joint

145339756
9C 10 MES 0811E: RNCC: 3 | RNVC: 2
9560170570: RNCC: 5 | RNVC: 2

5 Mar 2003

4730-14-474-9728
Pressure Plug Retention Cap

144749728
CR455752: RNCC: 3 | RNVC: 2
455752: RNCC: 5 | RNVC: 2
EA20120: RNCC: 5 | RNVC: 2

16 Mar 1995

4730-14-394-3735
Fluid Filter Element

143943735
A20F: RNCC: 3 | RNVC: 9

28 Aug 1984

4730-14-436-8468
Hose Coupling Assembly

144368468
DA2C729001630A1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-526-4999
Pipe Flange

145264999
D66122: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-546-5235
Threaded Tube Fitting Plug

145465235
N00352505: RNCC: 3 | RNVC: 2

14 Jul 2005

4730-14-396-2212
Fluid Pressure Line Multiple Connector

143962212
476703F: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-409-9513
Bulkhead Hose Connector

144099513
14400525V: RNCC: 3 | RNVC: 2

4 Jun 1986

4730-14-378-0136
Self-Sealing Coupling Assembly

143780136
16787857: RNCC: 3 | RNVC: 2
16787857: RNCC: 5 | RNVC: 9
16787857: RNCC: 5 | RNVC: 9

20 Jul 1982

4730-14-302-2983
Tube To Boss Straight Adapter

143022983
000540282P: RNCC: 3 | RNVC: 2
0UT1-111: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-296-2595
Quick Disconnect Coupling Half

142962595
420392: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-464-1497
Anchor And Reinforcement Pipe Clamp

144641497
DRV66195: RNCC: 3 | RNVC: 2
DRV66195: RNCC: 5 | RNVC: 9

15 Jul 1993

4730-14-489-8265
Threaded Tube Fitting Plug

144898265
E4740037: RNCC: 3 | RNVC: 9

22 Aug 1997

4730-14-436-7072
Bulkhead Hose Connector

144367072
DA2C203525921U1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-544-6282
Tube Union

145446282
073107001010081: RNCC: 3 | RNVC: 2

14 Feb 2005

4730-14-476-7035
Tube To Boss Straight Adapter

144767035
101160601710: RNCC: 3 | RNVC: 2

28 Jun 1995

4730-14-494-4912
Tube To Boss Straight Adapter

144944912
T55 376 60: RNCC: 3 | RNVC: 2
F300 0T 017 3967: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-470-6414
Pipe To Tube Straight Adapter

144706414
46800735: RNCC: 3 | RNVC: 2
M4ZS460D3141: RNCC: 5 | RNVC: 2
M4ZS560D3557: RNCC: 5 | RNVC: 2

29 Jun 1994

4730-14-287-7905
Pipe Flange

142877905
RUAN7625M913P6D: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-498-6584
Tube To Boss Straight Adapter

144986584
5000000938: RNCC: 3 | RNVC: 2
5000000938: RNCC: 5 | RNVC: 9
F300 0T 007 3893: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-260-9273
Pipe Flange

142609273
7062DC1F1M48XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-494-3363
Fluid Passage Bolt

144943363
5000296476: RNCC: 3 | RNVC: 2
F300 0T 017 0385: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-472-4924
Fluid Passage Bolt

144724924
17A25-26-34CYL: RNCC: 3 | RNVC: 2
817133128: RNCC: 5 | RNVC: 2
817Z33128: RNCC: 5 | RNVC: 2

26 Oct 1994

4730-14-424-6702
Tube To Boss Straight Adapter

144246702
256535: RNCC: 3 | RNVC: 2

2 Jun 1988

4730-14-271-9710

4730-14-338-2528
Bronze Tube Coude

143382528
CSN128: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-408-7330
Huile Separateur

144087330
7PL6VD: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-225-0071

4730-14-298-2643
Bouchon Male Manoeu

142982643
410923: RNCC: 3 | RNVC: 9
VDP6237: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-457-7401
Bulkhead Hose Connector

144577401
205877: RNCC: 3 | RNVC: 2

17 Sep 1992

4730-14-550-7991
Threaded Tube Fitting Plug

145507991
PE1365: RNCC: 3 | RNVC: 2

17 Jul 2006

4730-14-365-5763
Sediment Strainer Element

143655763
559035: RNCC: 3 | RNVC: 2
559035: RNCC: 5 | RNVC: 2

19 Sep 1980

4730-14-462-5940
Straight Tubing Connector

144625940
F001157: RNCC: 3 | RNVC: 9

28 Apr 1993

4730-14-423-8970
Hose To Boss Straight Adapter

144238970
05427116: RNCC: 3 | RNVC: 2
E05427116: RNCC: 5 | RNVC: 2

5 May 1988

4730-14-431-7312
Pipe To Hose Straight Adapter

144317312
14-16-20-R5016: RNCC: 3 | RNVC: 2

9 May 1989

4730-14-543-8318
Tube To Boss Straight Adapter

145438318
560502723: RNCC: 3 | RNVC: 2

11 Dec 2004

4730-14-331-1273
Tube To Boss Straight Adapter

143311273
9917756: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-043-0988
Reducteur Pour Tube

4730-14-391-7748
Tube To Boss Straight Adapter

143917748
DA2C512585004: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-438-8315
Pipe Flange

144388315
DLT086041: RNCC: 3 | RNVC: 2

9 Apr 1990

4730-14-518-5087
Return Tube Bend

145185087
HCOXX000033: RNCC: 3 | RNVC: 9

9 Feb 2000

4730-14-269-2049
Pipe Flange

142692049
7066EE1M57: RNCC: 2 | RNVC: 2
4730BJ-57M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-528-7423
Tube To Boss Swivel Joint

145287423
SM 612 MF1: RNCC: 3 | RNVC: 2
SM612MF1: RNCC: 5 | RNVC: 2

11 Feb 2002

4730-14-455-5725
Bulkhead Hose Connector

144555725
228126: RNCC: 3 | RNVC: 2
91727041: RNCC: 5 | RNVC: 2
228126: RNCC: 5 | RNVC: 2

28 May 1992

4730-14-358-3593
Tube To Boss Straight Adapter

143583593
1142309010: RNCC: 3 | RNVC: 2
DAH1142309010: RNCC: 5 | RNVC: 9

13 Aug 1979

4730-14-430-2478
Tube Coupling

144302478
20322938: RNCC: 3 | RNVC: 2
20322938: RNCC: 5 | RNVC: 9

14 Mar 1989

4730-14-554-0377
Tube Fitting Clinch Sleeve

145540377
372 222: RNCC: 3 | RNVC: 2
372 222: RNCC: 3 | RNVC: 2

7 Jun 2007

4730-14-306-3765
Tube Coupling

143063765
RT13005: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-549-4651
Tube Coupling Assembly

145494651
0236180090: RNCC: 3 | RNVC: 2

6 Apr 2006

4730-14-554-0993
Pipe Flange

145540993
604 114: RNCC: 3 | RNVC: 2
604 114: RNCC: 3 | RNVC: 2

11 Jun 2007

4730-14-531-6170
Quick Disconnect Coupling Half

145316170
NC4020120: RNCC: 3 | RNVC: 2

4 Sep 2002

4730-14-413-8913
Tube To Boss Straight Adapter

144138913
150802: RNCC: 3 | RNVC: 2
75039: RNCC: 5 | RNVC: 2

22 Jan 1987

4730-14-465-4000
Threaded Tube Fitting Plug

144654000
HSNGC0313AB: RNCC: 3 | RNVC: 2

28 Sep 1993

4730-14-426-6580
Tube To Boss Straight Adapter

144266580
5A12L16X150: RNCC: 3 | RNVC: 2
5A12L16X150: RNCC: 3 | RNVC: 9
105124188: RNCC: 5 | RNVC: 2
5005030828: RNCC: 5 | RNVC: 2

15 Sep 1988

4730-14-540-6713
Bulkhead Hose Connector

145406713
PE65001E06: RNCC: 3 | RNVC: 2
(241)A0126A040A06: RNCC: 5 | RNVC: 2
A040A06: RNCC: 5 | RNVC: 2

17 Apr 2004

4730-14-492-5965
Tube To Boss Straight Adapter

144925965
5516013004: RNCC: 3 | RNVC: 2
F300 0T 008 1283: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-512-8355
Tube Union

145128355
213534: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-268-5155

4730-14-269-2058

4730-14-568-7378
Tube Cross

145687378
14 05 493 0Y: RNCC: 3 | RNVC: 2

1 Jul 2011

4730-14-483-9687
Pipe Flange

144839687
FSLA.100.A+SPE.100A: RNCC: 3 | RNVC: 9

12 Oct 1996

4730-14-311-5821

4730-14-210-9632
Pied Special Pour G

142109632
P61: RNCC: 3 | RNVC: 9

1 Jan 1964

4730-14-403-0356
Tube To Hose Straight Adapter

144030356
13STJ7-8: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-525-7900
Tube To Boss Straight Adapter

145257900
F145306: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-455-6897
Hose To Gas Fitting Straight Adapter

144556897
EBKA025A: RNCC: 3 | RNVC: 2

11 Jun 1992

4730-14-203-6522

4730-14-355-5693

4730-14-556-4810
Fluid Pressure Line Multiple Connector

145564810
834A30000: RNCC: 3 | RNVC: 2

12 Mar 2008

4730-14-210-9780
Croix De Reduction

142109780
1CXR14X14X14X10: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-556-7746
Lubricating Fitting Set

145567746
1353014: RNCC: 3 | RNVC: 2
GRAIS00002: RNCC: 5 | RNVC: 2

10 Apr 2008

4730-14-571-8291
Hose To Boss Straight Adapter

145718291
447217: RNCC: 3 | RNVC: 2

15 May 2012

4730-14-515-1736
Tube Union

145151736
A96000010: RNCC: 3 | RNVC: 2

9 Jul 1999

4730-14-220-6762

4730-14-329-2517

4730-14-321-5049

4730-14-521-2602
Quick Disconnect Coupling Half

145212602
IL 00960 12: RNCC: 3 | RNVC: 2
IL0096012: RNCC: 5 | RNVC: 2
SYB1000: RNCC: 5 | RNVC: 2

13 Jul 2000

4730-14-414-0636
Self-Sealing Coupling Half

144140636
96109621: RNCC: 3 | RNVC: 2

22 Jan 1987

4730-14-239-4981

4730-14-268-1254

4730-14-561-5926
Pipe Flange

145615926
DLT056075: RNCC: 3 | RNVC: 2
D6075LT05: RNCC: 3 | RNVC: 9
FS0001268: RNCC: 6 | RNVC: 9

31 Jul 2009

4730-14-496-4787
Graisseur

144964787
476891: RNCC: 3 | RNVC: 2
F300 0T 021 5739: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-382-8902

4730-14-223-9220

4730-14-443-5882
Tube To Boss Straight Adapter

144435882
91911-6-4: RNCC: 3 | RNVC: 2
91631245: RNCC: 5 | RNVC: 2

28 Nov 1990

4730-14-305-9808

4730-14-393-4189
Bride Laterale

143934189
2-16014: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-480-1484
Obturateur A Bride

144801484
K15721PH049AF41/0: RNCC: 3 | RNVC: 2

21 Feb 1996

4730-14-414-6597
Tube Coupling

144146597
4730HK-RSP33,7: RNCC: 2 | RNVC: 2

20 Feb 1987

4730-14-562-6754
Hose Coupling

145626754
3-23609A-28D: RNCC: 3 | RNVC: 2

13 Nov 2009

4730-14-321-5826

4730-14-536-1099
Tube To Hose Straight Adapter

145361099
31802007007: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-520-8038
Hose To Boss Straight Adapter

145208038
0093758910: RNCC: 3 | RNVC: 2
0093758910: RNCC: 3 | RNVC: 2

14 Jun 2000

4730-14-444-9948
Tube Tee

144449948
JPB8: RNCC: 3 | RNVC: 2
5005330160: RNCC: 3 | RNVC: 2
JBPB8: RNCC: 5 | RNVC: 2
91711402: RNCC: 5 | RNVC: 2
5005330054: RNCC: 5 | RNVC: 2
F300 0T 024 2885: RNCC: 6 | RNVC: 9

30 Jan 1991

4730-14-393-5878
Tube To Boss Straight Adapter

143935878
504041C656: RNCC: 3 | RNVC: 2

7 Jun 1984

4730-14-561-8168
Tube Elbow

145618168
W30SCF: RNCC: 3 | RNVC: 2
W30SCF: RNCC: 5 | RNVC: 9

9 Sep 2009

4730-14-375-7117
Tube To Boss Straight Adapter

143757117
8401384266: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-519-4082
Raccord

145194082
520584: RNCC: 3 | RNVC: 2

15 Mar 2000

4730-14-260-3435

4730-14-260-0239

4730-14-503-1958
Hose Coupling Assembly

145031958
DA2C729002702A1: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-503-2077
Tube Coupling

145032077
RP1A504540084: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-568-0786
Quick Disconnect Coupling Half

145680786
10-115-1236: RNCC: 3 | RNVC: 2

6 May 2011

4730-14-436-7076
Bulkhead Hose Connector

144367076
DA2C203527911U1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-442-9465
Bulkhead Hose Connector

144429465
60291010: RNCC: 3 | RNVC: 9
91703519: RNCC: 5 | RNVC: 2

7 Nov 1990

4730-14-437-2102
Bulkhead Hose Connector

144372102
DA2C722200015: RNCC: 3 | RNVC: 2

23 Jan 1990

4730-14-560-5620
Tube To Boss Elbow

145605620
7421188247: RNCC: 1 | RNVC: 2
93303021: RNCC: 3 | RNVC: 2
21188247: RNCC: 5 | RNVC: 2

30 Apr 2009

4730-14-229-2717

4730-14-486-6246
Pipe Expansion Joint

144866246
MT1DN200PN16: RNCC: 3 | RNVC: 2

26 Mar 1997

4730-14-507-0492
Tube Tee

145070492
PE66103E121208: RNCC: 3 | RNVC: 2

8 Jun 1998

4730-14-494-5522
Tube To Boss Straight Adapter

144945522
643 457 16: RNCC: 3 | RNVC: 2
64345716: RNCC: 5 | RNVC: 2
F300 0T 017 4701: RNCC: 6 | RNVC: 9
F300 0T 021 6598: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-241-3356

4730-14-315-5122

4730-14-282-1924

4730-14-370-4903
Tube De Vidange

143704903
82554: RNCC: 3 | RNVC: 2
82554: RNCC: 5 | RNVC: 2

18 May 1981

4730-14-560-1925
Hydraulic Swivel Joint

145601925
X0239037: RNCC: 3 | RNVC: 2
CV150381: RNCC: 5 | RNVC: 2
X0239037: RNCC: 5 | RNVC: 2

1 Apr 2009

4730-14-243-6095

4730-14-576-1878
Quick Disconnect Plug

145761878
610975: RNCC: 3 | RNVC: 2

4 Jun 2013

4730-14-314-4764

4730-14-253-7862

4730-14-214-1706

4730-14-556-4489
Pipe Flange

145564489
2A 2 E EF 558300 001 2/5 DN51: RNCC: 3 | RNVC: 2

10 Mar 2008

4730-14-443-4643
Raccord Et Buse

144434643
4-110493-4: RNCC: 3 | RNVC: 2
4-110493-4: RNCC: 5 | RNVC: 9

23 Nov 1990

4730-14-462-7094
Tube To Hose Straight Adapter

144627094
F3BMB8-1/8: RNCC: 3 | RNVC: 2
F3BMB8-1/8: RNCC: 3 | RNVC: 9

28 Apr 1993

4730-14-233-6881

4730-14-539-3759
Rinca Freon Platine

145393759
61383067: RNCC: 3 | RNVC: 2

9 Jan 2004

4730-14-577-5936
Self-Sealing Coupling Assembly

145775936
202EB012: RNCC: 3 | RNVC: 2
A430409900295: RNCC: 5 | RNVC: 2

26 Sep 2013

4730-14-321-1435

4730-14-365-2775

4730-14-395-3748
Obturateur

143953748
N0188F32A: RNCC: 3 | RNVC: 2

2 Oct 1984

Load More Results