What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 102 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 102 of 185

4730-14-576-8236
Flange To Tube Straight Adapter

145768236
M4821341900000: RNCC: 3 | RNVC: 2

17 Jul 2013

4730-14-401-8314
Diaphragme De Bride

144018314
401MA0588F8REP12A: RNCC: 3 | RNVC: 2
401MA588F8REP12: RNCC: 5 | RNVC: 2

13 Jun 1985

4730-14-231-0875
Tube Tee

142310875
R10SX12X12: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-451-7488
Fluid Passage Bolt

144517488
A82172: RNCC: 3 | RNVC: 2

4 Dec 1991

4730-14-503-2017
Hose Coupling Assembly

145032017
RP1A500052200: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-538-5265
Tube Coupling Assembly

145385265
NGM0010060014042: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-401-3428
Bulkhead Hose Connector

144013428
2016-904: RNCC: 3 | RNVC: 2

5 Jun 1985

4730-14-331-1259

4730-14-290-8059

4730-14-345-0511
Tube To Boss Straight Adapter

143450511
113255: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-504-0609
Tube Coupling

145040609
NNP4730878750156: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-549-4871
Pipe Flange

145494871
DLT055627: RNCC: 3 | RNVC: 2

10 Apr 2006

4730-14-505-6435
Tube Tee

145056435
T2JJBFR12: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-360-0800
Tube To Boss Straight Adapter

143600800
09692A: RNCC: 3 | RNVC: 2
9692A: RNCC: 5 | RNVC: 9

31 Oct 1979

4730-14-437-4358
Tube Tee

144374358
16776690: RNCC: 3 | RNVC: 2

31 Jan 1990

4730-14-546-8912
Pipeline Flexible Spacer

145468912
15590010N: RNCC: 3 | RNVC: 2

2 Sep 2005

4730-14-516-0527
Fluid Flow Restrictor

145160527
SIFLS1R001200F4AREP3B: RNCC: 3 | RNVC: 2

8 Sep 1999

4730-14-276-0313
Tube-Hose Fitting Compression Sleeve

142760313
11216370G: RNCC: 3 | RNVC: 2
21637: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-368-4112

4730-14-325-0818
Speci Raccord Femel

143250818
0000367530: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-341-1623

4730-14-561-7918
Tube Elbow

145617918
EW12LMEDOMDCF: RNCC: 3 | RNVC: 2
EW12LMEDOMDCF: RNCC: 5 | RNVC: 9

7 Sep 2009

4730-14-556-3726
Quick Disconnect Coupling Half

145563726
RBE03.1150/OD/IA/FB: RNCC: 3 | RNVC: 2
RBE3-1150/OD/IA/FB: RNCC: 5 | RNVC: 2
EQF25867027: RNCC: 5 | RNVC: 2
RBE03-1150-0DIAFB: RNCC: 5 | RNVC: 2
RBE03-1150-OD-IA-FB: RNCC: 5 | RNVC: 2
RBE03-1150/OD/IA/FB: RNCC: 5 | RNVC: 2
RBE3-1150-0DIAFB: RNCC: 5 | RNVC: 2

3 Mar 2008

4730-14-458-3917
Pipe Expansion Joint

144583917
28909010100/A/REP2-3-7-8-9-10-11: RNCC: 3 | RNVC: 2
3021777: RNCC: 5 | RNVC: 2
3021777: RNCC: 5 | RNVC: 2

22 Oct 1992

4730-14-356-9450
Tube To Boss Straight Adapter

143569450
91010813: RNCC: 3 | RNVC: 2
A3-8-8X13BSPCYL: RNCC: 5 | RNVC: 9

15 May 1979

4730-14-386-6123
Tube Coupling

143866123
577-710-016-0: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-212-9297
Tube To Boss Straight Adapter

142129297
613-542-098-0: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-353-4049
Tube To Boss Straight Adapter

143534049
MCB10V13: RNCC: 3 | RNVC: 2
Q1-52-10-8-13C0NU: RNCC: 3 | RNVC: 2

8 Dec 1978

4730-14-501-2669
Graisseur

145012669
704-001-026: RNCC: 3 | RNVC: 2
704.001.026: RNCC: 3 | RNVC: 2
F300 0T 025 3075: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-543-4641
Tube To Gas Fitting Straight Adapter

145434641
AT13/08X13CYL: RNCC: 3 | RNVC: 2
SYQ5255: RNCC: 5 | RNVC: 2

4 Nov 2004

4730-14-449-5382
Tube Union

144495382
UNION MALE SOUD 2353L21,3: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-495-7807
Tube To Boss Straight Adapter

144957807
307022028028A: RNCC: 3 | RNVC: 9
F300 0T 020 0682: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-267-6261
Raccord Standard

142676261
1753-3BIS: RNCC: 3 | RNVC: 2
1753-3BIS: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-556-9630
Hose Mender

145569630
31-311: RNCC: 3 | RNVC: 2

24 Apr 2008

4730-14-273-8868

4730-14-436-2409
Quick Disconnect Coupling Half

144362409
SDM R 2: RNCC: 3 | RNVC: 2

11 Dec 1989

4730-14-443-4638
Tube To Boss Straight Adapter

144434638
225505: RNCC: 3 | RNVC: 2
4-581030-9: RNCC: 3 | RNVC: 2
4-581030-9: RNCC: 5 | RNVC: 9

23 Nov 1990

4730-14-529-8406
Hose Coupling Assembly

145298406
N 010 678 01: RNCC: 3 | RNVC: 2
S011 108 01: RNCC: 5 | RNVC: 2

17 Apr 2002

4730-14-357-7900
Fluid Pressure Line Multiple Connector

143577900
1-398-916: RNCC: 3 | RNVC: 2

20 Jul 1979

4730-14-385-7088
Tube To Boss Straight Adapter

143857088
243 3-4X1-2: RNCC: 3 | RNVC: 9

26 Jul 1983

4730-14-225-0962
Graisseur Compte Go

142250962
5904004: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-238-9047

4730-14-223-2894

4730-14-554-6460
Hose Splicing Set

145546460
C0611978/01/50: RNCC: 3 | RNVC: 2
CAE01874: RNCC: 5 | RNVC: 2

31 Jul 2007

4730-14-263-7993
Bouchon Filete Spec

142637993
24006011900: RNCC: 3 | RNVC: 2
6J119: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-219-2353

4730-14-556-7470
Pipe Reducer

145567470
8246R 509: RNCC: 3 | RNVC: 2

8 Apr 2008

4730-14-251-0334
Coude Pour Tube

142510334
115-55: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-248-6601

4730-14-242-8017

4730-14-207-3402

4730-14-319-6542
Fluid Pressure Line Multiple Connector

143196542
C52134105REP1: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-500-7491
Tube To Boss Straight Adapter

145007491
VKA3-10SOMDA3C: RNCC: 3 | RNVC: 2
VKA3-10-S0MDKA3C: RNCC: 5 | RNVC: 2
VKA3-10S0MDKA3C: RNCC: 5 | RNVC: 2
F300 0T 024 7688: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-399-6015
Tube To Boss Straight Adapter

143996015
AV6000-13-O2: RNCC: 3 | RNVC: 2
AV2996-22: RNCC: 5 | RNVC: 2
AV6000-13: RNCC: 5 | RNVC: 2
85-692-4560: RNCC: 6 | RNVC: 9

6 Mar 1985

4730-14-565-7858
Flange To Tube Elbow

145657858
0000370130: RNCC: 3 | RNVC: 2

22 Sep 2010

4730-14-394-0635
Quick Disconnect Coupling Half

143940635
65R58: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-542-1771
Hose To Gas Fitting Straight Adapter

145421771
10030106: RNCC: 3 | RNVC: 2
10030106: RNCC: 5 | RNVC: 9

8 Jul 2004

4730-14-367-0431

4730-14-040-3828
Flexible Tube Coupling Assembly

140403828
E20.A.3: RNCC: 3 | RNVC: 2
E20A3: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-573-3184
Quick Disconnect Coupling Half

145733184
7421962542: RNCC: 1 | RNVC: 2
050_KCOUPLMALE1/4: RNCC: 3 | RNVC: 2
21962542: RNCC: 5 | RNVC: 2

3 Oct 2012

4730-14-479-1805
Tube Fitting Socket Welded Ferrule

144791805
FI 2.12.43.01: RNCC: 3 | RNVC: 2

19 Dec 1995

4730-14-530-5995
Hose Fitting Swaging Socket

145305995
SO20511-6-1/8: RNCC: 3 | RNVC: 2

26 Jun 2002

4730-14-558-6790
Hose Coupling

145586790
10720224000: RNCC: 3 | RNVC: 2

25 Oct 2008

4730-14-562-5975
Tube Union

145625975
A96000361: RNCC: 3 | RNVC: 2

6 Nov 2009

4730-14-387-8450
Pipe Flange

143878450
NO PRIMARY REF14-387-8450: RNCC: 3 | RNVC: 2
0005-501DN40: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-453-2589
Fluid Pressure Line Multiple Connector

144532589
510-080-10: RNCC: 3 | RNVC: 2

12 Feb 1992

4730-14-387-4853
Tube Tee

143874853
499-00021-0: RNCC: 3 | RNVC: 2
499-00021-0: RNCC: 3 | RNVC: 9

15 Sep 1983

4730-14-302-0592
Mamelon Raccord

143020592
A10-71-887-20-0: RNCC: 3 | RNVC: 2
A10-71-887-20-0: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-558-8671
Tube To Boss Elbow

145588671
CG206-NP08-08: RNCC: 3 | RNVC: 2

18 Nov 2008

4730-14-452-7530
Tube Tee

144527530
162771: RNCC: 3 | RNVC: 2
91720530: RNCC: 5 | RNVC: 2
LV304-CS16S: RNCC: 5 | RNVC: 9
01-352-9614: RNCC: 6 | RNVC: 9

15 Jan 1992

4730-14-417-7879
Tube To Boss Straight Adapter

144177879
UMIISO12X18-150: RNCC: 3 | RNVC: 9

22 Jul 1987

4730-14-545-4358
Tube Tee

145454358
713.D.12.14.12: RNCC: 3 | RNVC: 2
P165D121412: RNCC: 3 | RNVC: 2
713 D 12 14 12: RNCC: 5 | RNVC: 2
74713D121412: RNCC: 5 | RNVC: 2
713D12 14 12: RNCC: 5 | RNVC: 2

12 Apr 2005

4730-14-345-8864
Raccord Pivo Embout

143458864
A77124-3: RNCC: 3 | RNVC: 2

5 Nov 1977

4730-14-524-0549
Tube Coupling

145240549
100-1/4: RNCC: 3 | RNVC: 2

22 Feb 2001

4730-14-514-3258
Tube Coupling

145143258
50083294-3: RNCC: 3 | RNVC: 2

12 May 1999

4730-14-438-9559
Tube To Boss Straight Adapter

144389559
UMIWCYL14-3-8: RNCC: 3 | RNVC: 9
91517855: RNCC: 5 | RNVC: 2

11 Apr 1990

4730-14-212-3125
Fluid Pressure Line Multiple Connector

142123125
A4021-1: RNCC: 3 | RNVC: 2
A4021-1: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-326-7866
Tube To Boss Straight Adapter

143267866
37737-1: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-326-8326
Tube Tee

143268326
9104080066: RNCC: 3 | RNVC: 2
CA7-8: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-439-2380
Bulkhead Hose Connector

144392380
332A52-1095-00: RNCC: 3 | RNVC: 2

25 Apr 1990

4730-14-260-9950
Bouchon Intrados

142609950
23310-02-1000P005: RNCC: 3 | RNVC: 2
233-11-35-01: RNCC: 5 | RNVC: 2

18 May 1989

4730-14-423-4574
Pipe Flange

144234574
UA50088006PN150-11D1SDN20: RNCC: 2 | RNVC: 2
4730HCPN150DN02011D1S: RNCC: 5 | RNVC: 2

20 Apr 1988

4730-14-261-7182
Pipe Flange

142617182
NO PRIMARY REF14-261-7182: RNCC: 3 | RNVC: 2
114H813: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-357-6427
Tube-Hose Fitting Compression Sleeve

143576427
67425: RNCC: 3 | RNVC: 2
85-689-7095: RNCC: 6 | RNVC: 9

27 Jun 1979

4730-14-317-9365
Fluid Pressure Line Multiple Connector

143179365
341A75-2004-21: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-310-5647
Tube To Boss Straight Adapter

143105647
1141916000: RNCC: 3 | RNVC: 2
DR2-904: RNCC: 5 | RNVC: 2
720440: RNCC: 5 | RNVC: 9
DAH1141916000: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-423-4154
Pipe Flange

144234154
UA50088006PN50-11D1DN50: RNCC: 2 | RNVC: 2
4730HCPN50DN05011D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-385-7083
Tube Tee

143857083
CB4-14: RNCC: 3 | RNVC: 9

26 Jul 1983

4730-14-347-1122
Pipeline Flexible Spacer

143471122
IT131NTH65U1198F4: RNCC: 2 | RNVC: 2
40-18DN65U1198F4: RNCC: 3 | RNVC: 2
I131NTH65U1198F4: RNCC: 5 | RNVC: 2
40-18DN65U1198F4: RNCC: 5 | RNVC: 9

19 Jan 1978

4730-14-043-2182
Quick Disconnect Coupling Half

140432182
GP050-1158: RNCC: 3 | RNVC: 2

10 Apr 1984

4730-14-437-2025
Hose To Gas Fitting Straight Adapter

144372025
415574: RNCC: 3 | RNVC: 2

23 Jan 1990

4730-14-480-2349
Quick Disconnect Coupling Half

144802349
34750671: RNCC: 3 | RNVC: 2
500330201: RNCC: 5 | RNVC: 2

28 Feb 1996

4730-14-338-3909
Bulkhead Hose Connector

143383909
31460600: RNCC: 3 | RNVC: 2

6 Nov 1976

4730-14-493-0607
Tube To Boss Straight Adapter

144930607
3565539MI: RNCC: 3 | RNVC: 2
F300 0T 009 7801: RNCC: 6 | RNVC: 9

8 Oct 1997

4730-14-325-9035
Pipe Flange

143259035
AS34TV102REP1: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-454-6855
Tube Coupling

144546855
1121603000: RNCC: 3 | RNVC: 2
91628963: RNCC: 5 | RNVC: 2
DAH1121603000: RNCC: 5 | RNVC: 9

9 Apr 1992

4730-14-226-9961
Fluid Pressure Line Multiple Connector

142269961
0000300130: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-320-2872
Bulkhead Hose Connector

143202872
0044690110: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-504-1982
Tube-Pipe Fitting Kit

145041982
1696758M2: RNCC: 3 | RNVC: 2

11 Feb 1998

4730-14-472-0747
Tube To Boss Straight Adapter

144720747
43A16S+PPV10X100: RNCC: 3 | RNVC: 2
2843133920NU: RNCC: 5 | RNVC: 2
5005030618: RNCC: 5 | RNVC: 2

5 Oct 1994

4730-14-533-6210
Tube To Boss Straight Adapter

145336210
D102382: RNCC: 3 | RNVC: 2

12 Feb 2003

4730-14-520-6958
Tube Coupling

145206958
47054885: RNCC: 3 | RNVC: 2

31 May 2000

4730-14-412-4273
Fluid Passage Bolt

144124273
401151: RNCC: 3 | RNVC: 2
BGE401151: RNCC: 5 | RNVC: 2

15 Oct 1986

4730-14-316-8181
Tube Tee

143168181
536MF14DET10: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-386-9936
Tube To Boss Straight Adapter

143869936
1010613: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-399-3319
Tube To Boss Straight Adapter

143993319
742PN08: RNCC: 3 | RNVC: 2
742 PN 08: RNCC: 5 | RNVC: 2
742PN08: RNCC: 5 | RNVC: 2
74742PN08: RNCC: 5 | RNVC: 2

6 Mar 1985

4730-14-509-0025
Tube Coupling

145090025
29951000: RNCC: 3 | RNVC: 2

14 Oct 1998

4730-14-250-1049
Fluid Pressure Line Multiple Connector

142501049
50216: RNCC: 3 | RNVC: 2
50216: RNCC: 3 | RNVC: 2
165503: RNCC: 5 | RNVC: 2
5000117126: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-567-8549
Pipe Tee

145678549
1501300002000: RNCC: 3 | RNVC: 2

18 Apr 2011

4730-14-339-1530
Tube To Boss Straight Adapter

143391530
9101253427: RNCC: 3 | RNVC: 2
L3-25-26-34: RNCC: 5 | RNVC: 9
L3-25-26-34CYL: RNCC: 5 | RNVC: 9

17 Dec 1976

4730-14-423-4496
Pipe Flange

144234496
UA50088006PN50-11B2SDN200: RNCC: 2 | RNVC: 2
4730HCPN50DN20011B2S: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-334-2557
Tube Tee

143342557
GSM163-017F61: RNCC: 3 | RNVC: 2
GSM163-17F61: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-398-5868
Tube Tee

143985868
GSM164-054F2: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-350-8057
Fluid Pressure Line Multiple Connector

143508057
76289B: RNCC: 3 | RNVC: 2
85-689-6278: RNCC: 6 | RNVC: 9

12 Jul 1978

4730-14-321-9650
Bride A Zinc

143219650
GSM147-005F14: RNCC: 3 | RNVC: 2
GSM147-05F14: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-504-0373
Self-Sealing Coupling Half

145040373
704A34-421-035: RNCC: 1 | RNVC: 2
9949436: RNCC: 3 | RNVC: 2
994-9436A: RNCC: 5 | RNVC: 2

4 Feb 1998

4730-14-500-9375
Tube Fitting Clinch Sleeve

145009375
850325: RNCC: 3 | RNVC: 2
300-900: RNCC: 5 | RNVC: 2
DUF850325: RNCC: 5 | RNVC: 9
F300 0T 024 9587: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-225-2678
Bouchon Avant

142252678
D1054-592: RNCC: 3 | RNVC: 2
D1054-592: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-228-5979

4730-14-359-7242

4730-14-304-2423

4730-14-509-6947
Bulkhead Hose Connector

145096947
726.D.08S.08.BP: RNCC: 3 | RNVC: 2
74726D08S08BP: RNCC: 5 | RNVC: 2
726 D 08S 08 BP: RNCC: 5 | RNVC: 2
726D08S08BP: RNCC: 5 | RNVC: 2

28 Oct 1998

4730-14-309-4701
Tube To Boss Straight Adapter

143094701
16800-0: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-229-2707

4730-14-242-6232

4730-14-536-0714
Straight Tubing Connector

145360714
91802002914: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-536-0659
Filler Cap Adapter Assembly

145360659
803229040406: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-407-8944
Pipe Flange

144078944
02136061300: RNCC: 3 | RNVC: 2

5 Mar 1986

4730-14-278-8174
Tube Tee

142788174
10193AREP222: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-238-6807
Pipeline Flexible Spacer

142386807
DILNE400MAR: RNCC: 3 | RNVC: 9
I131NE400MAR: RNCC: 5 | RNVC: 2

1 Jan 1967

4730-14-453-8846
Tube Tee

144538846
R1014Z08: RNCC: 3 | RNVC: 2
924560: RNCC: 5 | RNVC: 2
89472357: RNCC: 5 | RNVC: 2

12 Mar 1992

4730-14-326-0909
Tube Tee

143260909
5TR20X10TF14NN: RNCC: 3 | RNVC: 2
94H643: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-296-7143

4730-14-241-2267
Raccord

142412267
000352005P: RNCC: 3 | RNVC: 2
TID3310: RNCC: 5 | RNVC: 2
986: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-574-3066
Tube Coupling Assembly

145743066
FR-26044000019: RNCC: 3 | RNVC: 2
26044000019: RNCC: 5 | RNVC: 2

7 Jan 2013

4730-14-398-5775
Tube Tee

143985775
GSM164-059F14: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-335-7120
Tube To Boss Straight Adapter

143357120
G12-21-21-27C0: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-493-8109
Union

144938109
NO PRIMARY REF14-493-8109: RNCC: 3 | RNVC: 2
5005130004: RNCC: 5 | RNVC: 9
F300 0T 014 1111: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-325-3699
Sediment Strainer Element

143253699
14213: RNCC: 3 | RNVC: 2
14213: RNCC: 5 | RNVC: 9
4854 12-17REP3: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-390-1688
Bulkhead Hose Connector

143901688
366A87-1017-11: RNCC: 3 | RNVC: 2

7 Mar 1996

4730-14-457-3986
Bulkhead Hose Connector

144573986
MAT451-0010F4: RNCC: 3 | RNVC: 2

1 Sep 1992

4730-14-452-6619
Fluid Flow Restrictor

144526619
A140-71140: RNCC: 3 | RNVC: 2

15 Jan 1992

4730-14-241-9128
Raccord Special

142419128
403268: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-233-9595

4730-14-561-8798
Hose Coupling Assembly

145618798
6501BEH113A: RNCC: 3 | RNVC: 2

14 Sep 2009

4730-14-346-9522
Racc Tourna Bouchon

143469522
A76350: RNCC: 3 | RNVC: 2

19 Jan 1978

4730-14-321-9618
Tube Coupling

143219618
C0E809REP4: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-327-5232
Fluid Passage Bolt

143275232
G10496: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-355-5327
Tube Coupling

143555327
3751SB25A: RNCC: 3 | RNVC: 2
3751SB25A: RNCC: 5 | RNVC: 9

19 Mar 1979

4730-14-545-6220
Tube Coupling

145456220
0148662073: RNCC: 3 | RNVC: 2
91830754: RNCC: 5 | RNVC: 2

26 Apr 2005

4730-14-405-9046
Hose To Boss Straight Adapter

144059046
3117470: RNCC: 3 | RNVC: 2

12 Dec 1985

4730-14-444-7446
Tube To Boss Straight Adapter

144447446
123621304: RNCC: 3 | RNVC: 9

21 Jan 1991

4730-14-365-3432

4730-14-434-7145
Adaptateur Bride

144347145
BN329515D2DN25AC: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-041-0144

4730-14-560-6015
Sediment Strainer Element

145606015
F91: RNCC: 3 | RNVC: 2
T6550578: RNCC: 5 | RNVC: 2
CV155770: RNCC: 5 | RNVC: 2
T6550578: RNCC: 5 | RNVC: 2

4 May 2009

4730-14-335-7323

4730-14-335-7320

4730-14-576-5526
Quick Disconnect Coupling Assembly

145765526
R987093166: RNCC: 3 | RNVC: 2

25 Jun 2013

4730-14-287-7942
Pipe Flange

142877942
6784-2CE14: RNCC: 2 | RNVC: 2

1 Jan 1972

4730-14-460-7686
Tube To Boss Straight Adapter

144607686
MAT164-0056F8: RNCC: 3 | RNVC: 2

9 Feb 1993

4730-14-463-0075
Tube To Boss Straight Adapter

144630075
5AG17-15-21C0: RNCC: 3 | RNVC: 2
91737738: RNCC: 5 | RNVC: 2

12 May 1993

4730-14-499-1208
Hose To Boss Straight Adapter

144991208
NO PRIMARY REF14-499-1208: RNCC: 3 | RNVC: 2
823-027: RNCC: 5 | RNVC: 2
833-027: RNCC: 5 | RNVC: 2
F300 0T 018 3696: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-460-4399
Quick Disconnect Coupling Half

144604399
N001-222-88: RNCC: 3 | RNVC: 2

26 Jan 1993

4730-14-268-5095
Return Tube Bend

142685095
A49182C159BEJ: RNCC: 2 | RNVC: 2
3D180-159MM: RNCC: 3 | RNVC: 2
3D180-159MM: RNCC: 3 | RNVC: 2
E29-044-159MM180: RNCC: 5 | RNVC: 2
3D180-159MM: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-301-8075
Quick Disconnect Coupling Half

143018075
NO PRIMARY REF14-301-8075: RNCC: 3 | RNVC: 2
4090-4097-40-45: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-230-9776
Pipe Flange

142309776
8316A65-78: RNCC: 3 | RNVC: 2
DLT034440: RNCC: 5 | RNVC: 2
8316A65-78: RNCC: 5 | RNVC: 9
DLT34440: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-040-2960
Tube To Boss Straight Adapter

140402960
NO PRIMARY REF14-040-2960: RNCC: 3 | RNVC: 2
210954: RNCC: 5 | RNVC: 2
RT7557: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-222-7306
Tube Tee

142227306
GSM1297FE3-24TABLEAU1: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-496-9877
Fluid Pressure Line Multiple Connector

144969877
NO PRIMARY REF14-496-9877: RNCC: 3 | RNVC: 2
50-4847: RNCC: 5 | RNVC: 9
F300 0T 022 3957: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-334-2659
Tube To Boss Straight Adapter

143342659
Q1-42-15-15-21C0NU: RNCC: 3 | RNVC: 2

23 Apr 1976

4730-14-287-7940
Pipe Flange

142877940
6784-2CE8: RNCC: 2 | RNVC: 2

1 Jan 1972

4730-14-273-5421

4730-14-298-7069

4730-14-225-0093
Bride De Barre Guid

142250093
62828: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-338-8566

4730-14-271-9676

4730-14-562-7354
Tube Coupling

145627354
6005002902: RNCC: 3 | RNVC: 2

18 Nov 2009

4730-14-260-9211

4730-14-363-6698
Pipe Flange

143636698
H1078TS2PL3A: RNCC: 3 | RNVC: 2

6 Jul 1980

4730-14-254-5559
Tube Coupling Inverted Nut

142545559
L327026: RNCC: 3 | RNVC: 2
327026: RNCC: 5 | RNVC: 2
35114: RNCC: 5 | RNVC: 2
B295705: RNCC: 5 | RNVC: 2
0603532400: RNCC: 5 | RNVC: 2
23610210: RNCC: 5 | RNVC: 9
DBAL327026: RNCC: 5 | RNVC: 9
295705: RNCC: 5 | RNVC: 9
B295705: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-436-2550
Quick Disconnect Coupling Half

144362550
HA0531200: RNCC: 3 | RNVC: 2

12 Dec 1989

4730-14-430-6439
Raccord Buse

144306439
PM1A534100040: RNCC: 3 | RNVC: 2
PM1A534100040: RNCC: 5 | RNVC: 2

22 Mar 1989

4730-14-366-6003

4730-14-334-2662

4730-14-226-9955
Raccord Special

142269955
0000280070: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-217-0095
Raccord De Jonction

142170095
9220522: RNCC: 3 | RNVC: 2
GIU1091: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-563-3515
Tube To Boss Straight Adapter

145633515
2401 G13 706 L: RNCC: 3 | RNVC: 2

29 Jan 2010

4730-14-262-9563
Support Superieur T

142629563
DLT005279: RNCC: 3 | RNVC: 2
DLT005279: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-440-1143
Pipe Expansion Joint

144401143
AX24B80-16-110: RNCC: 3 | RNVC: 2
307-225-80-16-110: RNCC: 5 | RNVC: 2

11 Jul 1990

4730-14-458-5902
Pipe Fitting Flared Collar

144585902
89058-300: RNCC: 3 | RNVC: 2
RAR1585: RNCC: 5 | RNVC: 2
89058300: RNCC: 5 | RNVC: 2

27 Oct 1992

4730-14-275-2623
Raccord Orientable

142752623
R4A751-20: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-231-1573
Fluid Passage Bolt

142311573
3560-32Z3CN18: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-217-2873

4730-14-350-0999

4730-14-229-7173
Tamis Filtre A Sedi

142297173
1A253: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-366-9185
Fluid Passage Bolt

143669185
3560-6: RNCC: 3 | RNVC: 2

11 Dec 1980

4730-14-329-6148

4730-14-378-4570
Self-Sealing Coupling Half

143784570
435C03: RNCC: 3 | RNVC: 2
89138020: RNCC: 5 | RNVC: 2

11 Aug 1982

4730-14-369-1157
Flexible Tube Coupling Assembly

143691157
E50.GB.03: RNCC: 3 | RNVC: 2
E50GB03: RNCC: 5 | RNVC: 2

17 Apr 1981

4730-14-340-1209

4730-14-303-3139

4730-14-505-6857
Tube To Boss Straight Adapter

145056857
326467C38819: RNCC: 3 | RNVC: 2
0374: RNCC: 3 | RNVC: 2

26 Mar 1998

4730-14-274-1903
Tube To Boss Straight Adapter

142741903
DM51: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-425-6907
Flange To Boss Straight Adapter

144256907
8813785000: RNCC: 3 | RNVC: 2

21 Jul 1988

4730-14-521-1271
Tube To Boss Straight Adapter

145211271
82131010: RNCC: 3 | RNVC: 2
5005030457: RNCC: 5 | RNVC: 2
204L05140: RNCC: 5 | RNVC: 2

11 Jul 2000

4730-14-484-4817
Tube Tee

144844817
TE15: RNCC: 3 | RNVC: 2
91629898: RNCC: 5 | RNVC: 2
91629898: RNCC: 5 | RNVC: 2

21 Nov 1996

4730-14-331-9627
Quick Disconnect Coupling Half

143319627
9685-02-444: RNCC: 3 | RNVC: 2
9685-02-444: RNCC: 5 | RNVC: 9
0685-02-40X45: RNCC: 5 | RNVC: 9
9685-02-40X45: RNCC: 5 | RNVC: 9

2 Jul 1975

4730-14-335-0437
Tube To Boss Straight Adapter

143350437
GSM164-041F17: RNCC: 3 | RNVC: 2
GSM164-05F64: RNCC: 5 | RNVC: 2

2 Jun 1976

4730-14-455-8776
Tube Union

144558776
NO PRIMARY REF14-455-8776: RNCC: 3 | RNVC: 2
5005330107: RNCC: 5 | RNVC: 2
5005330173: RNCC: 5 | RNVC: 2
91632382: RNCC: 5 | RNVC: 2
31500660: RNCC: 5 | RNVC: 9

11 Jun 1992

4730-14-304-6495
Tube To Boss Straight Adapter

143046495
9101253466: RNCC: 3 | RNVC: 2
CA3-25-26X34BSPCYLPH: RNCC: 5 | RNVC: 9
CA3-25-26-34: RNCC: 5 | RNVC: 9
CA3-25-26-34CYL: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-407-4271
Tube To Boss Straight Adapter

144074271
12-38-26-34CYL: RNCC: 3 | RNVC: 2
UMA38X26-34N: RNCC: 3 | RNVC: 2

12 Feb 1986

4730-14-374-4174
Fluid Passage Bolt

143744174
GSM164-044F10: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-410-7739
Quick Disconnect Coupling Half

144107739
RBE11-1152/IA: RNCC: 3 | RNVC: 2
RBE11-1152IA: RNCC: 5 | RNVC: 2

9 Jul 1986

4730-14-359-3211
Quick Disconnect Coupling Assembly

143593211
SDS0-40BCD: RNCC: 3 | RNVC: 2

2 Oct 1979

4730-14-339-1073
Tube Tee

143391073
GSM514-001F41: RNCC: 3 | RNVC: 2
411MA267F15: RNCC: 5 | RNVC: 2
GSM514-01F41: RNCC: 5 | RNVC: 2

17 Dec 1976

4730-14-328-9596
Tube Tee

143289596
Q1-5TR25X20X14NNNU: RNCC: 3 | RNVC: 2
R1-5TR25X20X14NNNU: RNCC: 3 | RNVC: 2
GSM164-012F25: RNCC: 3 | RNVC: 2
TRK25X20X14NNU: RNCC: 3 | RNVC: 2
10RCA25X20X14NU: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-304-0417
Tube To Boss Straight Adapter

143040417
Q5 1R 12 10 12 100: RNCC: 3 | RNVC: 2
Q5-1R12-10-12X100: RNCC: 3 | RNVC: 2
Q5R1210-12X100: RNCC: 5 | RNVC: 2
RA12-10-12X1: RNCC: 5 | RNVC: 2
RA12-10-12X100: RNCC: 5 | RNVC: 2
RA1210-12X100: RNCC: 5 | RNVC: 2
99058236: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-211-9106
Tube To Boss Straight Adapter

142119106
52-10/14X125: RNCC: 3 | RNVC: 2
UML10X14-125N: RNCC: 3 | RNVC: 2
4L10-14X125: RNCC: 3 | RNVC: 2
ML10-14X1-25: RNCC: 3 | RNVC: 2
91362110: RNCC: 5 | RNVC: 2
91362110: RNCC: 5 | RNVC: 2
52-10-14X125: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-343-7612
Fluid Pressure Line Multiple Connector

143437612
FA1F726-014: RNCC: 3 | RNVC: 2

13 Jul 1977

4730-14-273-8538
Tube To Boss Straight Adapter

142738538
52-30-26-34C0: RNCC: 3 | RNVC: 2
4L30-26-34C0: RNCC: 3 | RNVC: 2
UMCL30X26-34N: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-305-6321
Tube To Boss Straight Adapter

143056321
52-12-16-125: RNCC: 3 | RNVC: 2
4L12-16X125: RNCC: 3 | RNVC: 2
52-12-16X125: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-273-5319

4730-14-578-0874
Pipe Cap

145780874
U00000012: RNCC: 3 | RNVC: 2

29 Oct 2013

4730-14-219-4180
Obturateur De Racco

142194180
R10432: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-309-7169
Pion

143097169
A77316: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-247-9457
Raccord Droit

142479457
23S8-2: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-477-0496
Tube Coupling

144770496
520 1235-1-NIB-S: RNCC: 3 | RNVC: 2
1084181D00: RNCC: 5 | RNVC: 2

19 Jul 1995

4730-14-433-3628
Tube Tee

144333628
DLT024644: RNCC: 3 | RNVC: 2
DLT565182KREP13FOLIO5-1/2: RNCC: 5 | RNVC: 2

24 Jul 1989

4730-14-423-4387
Quick Disconnect Coupling Half

144234387
5010-4: RNCC: 3 | RNVC: 2
45539: RNCC: 5 | RNVC: 9

19 Apr 1988

4730-14-570-6194
Quick Disconnect Coupling Half

145706194
RMI16.6155: RNCC: 3 | RNVC: 2

11 Jan 2012

4730-14-562-5325
Tube To Boss Elbow

145625325
3169 06 55: RNCC: 3 | RNVC: 2
FS0002377: RNCC: 6 | RNVC: 9

3 Nov 2009

4730-14-560-9003
Pipe Elbow Assembly

145609003
8072 L08 00: RNCC: 3 | RNVC: 2
13781: RNCC: 5 | RNVC: 2

28 May 2009

4730-14-241-5978
Raccord Ejectable

142415978
402861: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-409-9130
Air Hose Connector

144099130
NO PRIMARY REF14-409-9130: RNCC: 3 | RNVC: 2
073: RNCC: 5 | RNVC: 9

4 Jun 1986

4730-14-458-6771
Quick Disconnect Coupling Half

144586771
N003-125-13: RNCC: 3 | RNVC: 2
S001-122-74: RNCC: 5 | RNVC: 2

29 Oct 1992

4730-14-349-7478
Exhaust-Intake Pneumatic Muffler

143497478
346 00 004: RNCC: 3 | RNVC: 2
346-00-004: RNCC: 5 | RNVC: 2

22 May 1978

4730-14-514-3618
Tube-Hose Fitting Compression Sleeve

145143618
NO PRIMARY REF14-514-3618: RNCC: 3 | RNVC: 2
NNP4730860757630: RNCC: 5 | RNVC: 2
BAGUE BICONIQUE PR 7X10: RNCC: 5 | RNVC: 2

12 May 1999

4730-14-407-0625
Tube Tee

144070625
688-24378-00: RNCC: 3 | RNVC: 2

29 Jan 1986

4730-14-415-8489
Pipeline Flexible Spacer

144158489
4283-47-160: RNCC: 3 | RNVC: 2

21 May 1987

4730-14-422-3212
Pipe Flange

144223212
B0012-010: RNCC: 3 | RNVC: 2

24 Feb 1988

4730-14-417-1115
Fluid Pressure Line Multiple Connector

144171115
LV501-CS0811S: RNCC: 3 | RNVC: 2
OMA8X12-100S: RNCC: 5 | RNVC: 2
0MA8X12-100S: RNCC: 5 | RNVC: 2

1 Jul 1987

4730-14-423-4263
Pipe Flange

144234263
UA50088006PN100-11D1DN125: RNCC: 2 | RNVC: 2
4730HCPN100DN12511D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-349-4046
Adaptateur Rallonge

143494046
MS1288-101: RNCC: 3 | RNVC: 2

22 May 1978

4730-14-273-5045
Tube Coupling

142735045
7062BA1RPET2-10C337A: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-325-9563
Fluid Passage Bolt

143259563
44312AE022L: RNCC: 2 | RNVC: 2
L44312-22AEL: RNCC: 5 | RNVC: 2
85-660-8720: RNCC: 6 | RNVC: 9

2 Jul 1975

4730-14-567-4010
Quick Disconnect Coupling Half

145674010
RBE 03.6150/IC: RNCC: 3 | RNVC: 2
RBE03-6150/IC: RNCC: 5 | RNVC: 2

11 Mar 2011

4730-14-200-5793
Tube To Boss Straight Adapter

142005793
873-100FRF102-114GAZF: RNCC: 3 | RNVC: 2

1 Jan 1962

4730-14-292-5059
Fluid Pressure Line Multiple Connector

142925059
F753-001: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-276-2038
Tube Fitting Brazing Ferrule

142762038
6784-1DB38-28: RNCC: 2 | RNVC: 2
MEC11386: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-563-9853
Air Line Manifold

145639853
824.52.1.8: RNCC: 3 | RNVC: 2

1 Apr 2010

4730-14-457-6663
Tubulure

144576663
2-22631: RNCC: 3 | RNVC: 2

10 Sep 1992

4730-14-281-6839
Bride A Zinc

142816839
109REPC: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-457-6988
Pipe Joint Welding Ring

144576988
BN329514DN20INOX: RNCC: 3 | RNVC: 2
BN329-514DN20INOXEXTRUDE: RNCC: 3 | RNVC: 2

15 Sep 1992

4730-14-432-4026
Self-Sealing Coupling Assembly

144324026
RBE3-2100-0S1C: RNCC: 3 | RNVC: 2
RBE3-2100-0S1C-79219: RNCC: 5 | RNVC: 2
RBE321000S1C: RNCC: 5 | RNVC: 2

9 Jun 1989

4730-14-572-7460
Pipe Expansion Joint

145727460
FR-26042800023: RNCC: 3 | RNVC: 2
26042800023: RNCC: 5 | RNVC: 2

30 Jul 2012

4730-14-268-8866
Tube To Boss Straight Adapter

142688866
631X4110: RNCC: 3 | RNVC: 2
U1-10C631X4110: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-370-8877
Fluid Pressure Line Multiple Connector

143708877
702A30-0200-20: RNCC: 3 | RNVC: 2

5 Jun 1981

4730-14-505-5832
Tube To Boss Straight Adapter

145055832
5A12-22X150: RNCC: 3 | RNVC: 9

26 Mar 1998

4730-14-233-3804
Bouchon Special

142333804
3210-31006-602: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-508-5690
Fluid Pressure Line Multiple Connector

145085690
773-410-873F39: RNCC: 3 | RNVC: 2

16 Sep 1998

4730-14-225-6496
Bride Circuit Hydra

142256496
111542000: RNCC: 3 | RNVC: 9
111542001: RNCC: 5 | RNVC: 9

1 Jan 1966

4730-14-438-2424
Raccord Support

144382424
D55523: RNCC: 3 | RNVC: 2
D55523: RNCC: 5 | RNVC: 2

7 Mar 1990

4730-14-234-1844
Raccord Orientable

142341844
ES10955: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-458-8621
Tube Coupling

144588621
42.8/1/4BGS: RNCC: 3 | RNVC: 2
80X2424A151: RNCC: 5 | RNVC: 2

5 Nov 1992

4730-14-403-0339
Tube To Boss Straight Adapter

144030339
G4BXSM06-1-4: RNCC: 3 | RNVC: 2

25 Jul 1985

4730-14-421-5241
Tube Coupling

144215241
MU48-3: RNCC: 3 | RNVC: 9

18 Jan 1988

4730-14-567-8150
Pipe Nipple

145678150
MLH 25GC: RNCC: 3 | RNVC: 2
19182.26.0: RNCC: 5 | RNVC: 2

13 Apr 2011

4730-14-481-2177
Tube To Boss Straight Adapter

144812177
23 48 43: RNCC: 3 | RNVC: 2

25 Apr 1996

4730-14-340-4470
Fluid Pressure Line Multiple Connector

143404470
70855021: RNCC: 3 | RNVC: 2
70855021: RNCC: 5 | RNVC: 9
855021: RNCC: 5 | RNVC: 9

14 Feb 1977

4730-14-373-3037
Tube Coupling

143733037
11622-2: RNCC: 3 | RNVC: 2
11622-2: RNCC: 5 | RNVC: 9

21 Oct 1981

4730-14-269-2048
Pipe Flange

142692048
7066EE1M48-3: RNCC: 2 | RNVC: 2
4730BJ-48,3M: RNCC: 5 | RNVC: 2

1 Jan 1970

4730-14-559-1464
Hose Coupling

145591464
00 173 710 06L: RNCC: 3 | RNVC: 2

10 Dec 2008

4730-14-280-2706
Swivel Retaining Pipe Flange

142802706
2-11924: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-405-0695
Tube Coupling

144050695
270GCU35 1/4: RNCC: 3 | RNVC: 2

20 Nov 1985

4730-14-287-3247

4730-14-395-3247
Tube Union

143953247
AFY270 1-4: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-508-5669
Air Hose Connector

145085669
GSM294-04FF42DET56: RNCC: 3 | RNVC: 2

16 Sep 1998

4730-14-559-0365
Self-Sealing Coupling Half

145590365
SM 136A 24: RNCC: 3 | RNVC: 2

1 Dec 2008

4730-14-215-9506
Raccord En Croix Po

142159506
536-411-004: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-317-7854

4730-14-316-9547

4730-14-282-8277

4730-14-571-0979
Flange To Tube Straight Adapter

145710979
M2821351800000: RNCC: 3 | RNVC: 2

20 Feb 2012

4730-14-433-2277

4730-14-572-8644
Boss Outlet

145728644
0298530220: RNCC: 3 | RNVC: 2

20 Aug 2012

4730-14-419-6836
Pipeline Flexible Spacer

144196836
DLT602422: RNCC: 3 | RNVC: 2

3 Nov 1987

4730-14-365-3415

4730-14-444-1768
Bulkhead Hose Connector

144441768
PM1A729009225: RNCC: 3 | RNVC: 2
PM1A729009225: RNCC: 5 | RNVC: 2

18 Dec 1990

4730-14-525-8064
Tube To Boss Straight Adapter

145258064
H102871: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-449-0350
Tube Tee

144490350
16787502: RNCC: 3 | RNVC: 2
16787502: RNCC: 5 | RNVC: 9

24 Jul 1991

4730-14-205-0412

4730-14-270-5033

4730-14-537-0331
Tube To Boss Straight Adapter

145370331
1202599: RNCC: 3 | RNVC: 2

24 Sep 2003

4730-14-214-1946

4730-14-449-2966
Flexible Tube Coupling Assembly

144492966
572989: RNCC: 3 | RNVC: 9

7 Aug 1991

4730-14-360-5859
Tube To Boss Straight Adapter

143605859
16787484: RNCC: 3 | RNVC: 2
16787484: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-361-8129
Fluid Pressure Line Multiple Connector

143618129
79079907: RNCC: 3 | RNVC: 2
79079907: RNCC: 5 | RNVC: 9

20 Feb 1980

4730-14-317-7060
Tube To Boss Straight Adapter

143177060
466-8A3P3: RNCC: 3 | RNVC: 2
466-8A3P3: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-329-0357

4730-14-457-8033
Pipe Flange

144578033
4730JADN350-11D1S: RNCC: 2 | RNVC: 2

24 Sep 1992

4730-14-366-5057
Tube To Boss Straight Adapter

143665057
A013516 06 08: RNCC: 3 | RNVC: 2
2816G17-8: RNCC: 5 | RNVC: 2
91720028: RNCC: 5 | RNVC: 9
2816-G17-8: RNCC: 5 | RNVC: 9

20 Nov 1980

4730-14-041-2506
Bulkhead Hose Connector

140412506
N410-19: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-441-3264
Echangeu Obturateur

144413264
12-841157-107: RNCC: 3 | RNVC: 2

22 Aug 1990

4730-14-362-1656
Sediment Strainer Element

143621656
NO PRIMARY REF14-362-1656: RNCC: 3 | RNVC: 2
704423: RNCC: 5 | RNVC: 9

20 Feb 1980

4730-14-401-7565
Tube Union

144017565
NO PRIMARY REF14-401-7565: RNCC: 3 | RNVC: 2
EA10M0AD: RNCC: 5 | RNVC: 9

13 Jun 1985

4730-14-410-9855
Tube Fitting Brazing Ferrule

144109855
4730GB0273: RNCC: 2 | RNVC: 2
BN324-551F4-273: RNCC: 3 | RNVC: 2

23 Jul 1986

4730-14-360-9856
Tube To Boss Straight Adapter

143609856
01050410: RNCC: 3 | RNVC: 2
231-4935: RNCC: 5 | RNVC: 2
1050410: RNCC: 5 | RNVC: 9
85-691-0665: RNCC: 6 | RNVC: 9

19 Dec 1979

4730-14-377-2568
Bulkhead Hose Connector

143772568
366A58-1004-20: RNCC: 3 | RNVC: 2

17 May 1982

4730-14-495-1283
Tube To Boss Straight Adapter

144951283
H16375-84: RNCC: 3 | RNVC: 2
F300 0T 018 4085: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-423-5601
Bulkhead Hose Connector

144235601
F521-05-03: RNCC: 3 | RNVC: 2

21 Apr 1988

4730-14-471-7102
Bulkhead Hose Connector

144717102
LN327-01513DN40: RNCC: 3 | RNVC: 2

13 Sep 1994

4730-14-210-2893
Obturateur

142102893
ES1U4Z6: RNCC: 3 | RNVC: 2
679-204-014-0: RNCC: 5 | RNVC: 2
9464-04014: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-213-0471
Fluid Passage Bolt

142130471
057-49-004: RNCC: 3 | RNVC: 2
0057490040: RNCC: 5 | RNVC: 2

1 Jan 1964

4730-14-343-5148
Fluid Pressure Line Multiple Connector

143435148
610-18NEKD: RNCC: 3 | RNVC: 2
501-730-578-0: RNCC: 5 | RNVC: 2

16 Jun 1977

4730-14-503-2103
Tube Tee

145032103
723.D.06.08.08S: RNCC: 3 | RNVC: 2
P166D060808S: RNCC: 3 | RNVC: 2
723 D 06 08 08S: RNCC: 5 | RNVC: 2
723D06 08 08S: RNCC: 5 | RNVC: 2
723D060808S: RNCC: 5 | RNVC: 2
723D06-08-08S: RNCC: 5 | RNVC: 2
74723D060808S: RNCC: 5 | RNVC: 2
74723D060808S: RNCC: 5 | RNVC: 2

7 Jan 1998

4730-14-477-0046
Fluid Passage Bolt

144770046
MAT164-0056-E-F5-D: RNCC: 3 | RNVC: 2

12 Jul 1995

4730-14-388-2559
Pipe Expansion Joint

143882559
NO PRIMARY REF14-388-2559: RNCC: 3 | RNVC: 2
M16415: RNCC: 5 | RNVC: 9

12 Oct 1983

4730-14-432-8318
Pipe Flange

144328318
X555121: RNCC: 3 | RNVC: 2
X555121-78203: RNCC: 3 | RNVC: 2

28 Jun 1989

4730-14-572-7452
Pipe Expansion Joint

145727452
FR-26042800022: RNCC: 3 | RNVC: 2
26042800022: RNCC: 5 | RNVC: 2

30 Jul 2012

4730-14-268-7506
Tube To Boss Straight Adapter

142687506
262-12-78116-03: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-202-6531

4730-14-558-9450
Check Valve Adapter

145589450
7 604 009: RNCC: 3 | RNVC: 2

24 Nov 2008

4730-14-443-6731
Pipeline Flexible Spacer

144436731
2-544783-1: RNCC: 3 | RNVC: 2
2-544783-1: RNCC: 5 | RNVC: 9

4 Dec 1990

4730-14-212-1188

4730-14-570-5884
Water Feeder Manifold

145705884
003329: RNCC: 3 | RNVC: 2

9 Jan 2012

4730-14-340-1205

4730-14-290-8553

4730-14-555-0545
Hose To Gas Fitting Straight Adapter

145550545
M4ZS460D3168: RNCC: 3 | RNVC: 2
46800511: RNCC: 5 | RNVC: 2

25 Sep 2007

4730-14-388-9752
Sediment Strainer Element

143889752
A5042REP3: RNCC: 3 | RNVC: 2

29 Nov 1983

4730-14-536-4728
Hose Coupling Assembly

145364728
51200010: RNCC: 3 | RNVC: 2

27 Aug 2003

4730-14-435-3371
Straight Tubing Connector

144353371
0308852410: RNCC: 3 | RNVC: 2
89277312: RNCC: 5 | RNVC: 2

7 Nov 1989

4730-14-577-0764
Boss Outlet

145770764
0301042540: RNCC: 3 | RNVC: 2

5 Aug 2013

4730-14-306-5668

4730-14-542-0231
Sediment Strainer Element

145420231
20049-458: RNCC: 3 | RNVC: 2
502103005029A: RNCC: 3 | RNVC: 9

2 Jul 2004

4730-14-418-7333
Pipeline Flexible Spacer

144187333
HELIAIR650-1: RNCC: 3 | RNVC: 2

14 Sep 1987

4730-14-355-8576
Fluid Pressure Line Multiple Connector

143558576
1-398-403: RNCC: 3 | RNVC: 2

5 Apr 1979

4730-14-427-4489
Tube Tee

144274489
4730JCEG406X22,2: RNCC: 2 | RNVC: 2

20 Oct 1988

4730-14-285-2926
Bride

142852926
2-11804: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-313-3676
Sediment Strainer Element

143133676
25692-1: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-216-1229

4730-14-278-5844

4730-14-563-4974
Blind Pipe Flange

145634974
GA64713: RNCC: 3 | RNVC: 2

11 Feb 2010

4730-14-282-9932
Quick Disconnect Coupling Half

142829932
S61705A100BZ: RNCC: 2 | RNVC: 2

1 Jan 1971

4730-14-413-8561
Quick Disconnect Plug

144138561
277: RNCC: 3 | RNVC: 2
M4ZS420D1949: RNCC: 5 | RNVC: 2
M4ZS420D1610: RNCC: 5 | RNVC: 2

22 Jan 1987

4730-14-273-5426

4730-14-519-4257
Ensemble Raccord

145194257
MTFLXM9006500A: RNCC: 3 | RNVC: 2

17 Mar 2000

4730-14-377-8087

4730-14-554-2172
Tube Union

145542172
357 160: RNCC: 3 | RNVC: 2
357 160: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-14-259-4050
Bouchon Special

142594050
75313B: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-460-1984
Tube Union

144601984
10000 E3 0231: RNCC: 3 | RNVC: 2

14 Jan 1993

4730-14-482-8789
Frein Tuyau Raccord

144828789
356547X1: RNCC: 3 | RNVC: 2

1 Aug 1996

4730-14-375-7145
Tube To Boss Straight Adapter

143757145
91012887: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-352-3455
Fluid Passage Bolt

143523455
341781: RNCC: 3 | RNVC: 2
341781: RNCC: 5 | RNVC: 2
341781: RNCC: 5 | RNVC: 9

16 Oct 1978

4730-14-381-8451
Threaded Tube Fitting Plug

143818451
16902214: RNCC: 3 | RNVC: 2

25 Jan 1983

4730-14-224-2592
Tube Coupling Inverted Nut

142242592
PF110005: RNCC: 3 | RNVC: 2
8000338: RNCC: 5 | RNVC: 2

1 Jan 1966

4730-14-334-3370
Tube Tee

143343370
403144: RNCC: 3 | RNVC: 9

23 Apr 1976

4730-14-280-6664
Quick Disconnect Coupling Half

142806664
QSB8: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-300-7482
Fluid Pressure Line Multiple Connector

143007482
411MA0295F14: RNCC: 3 | RNVC: 2
411MA295F14: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-444-7728
Tube To Gas Fitting Straight Adapter

144447728
0RSCA16X15-21DTCW12: RNCC: 3 | RNVC: 2
LW177CW6078N: RNCC: 5 | RNVC: 2

21 Jan 1991

4730-14-040-4034
Tube Tee

140404034
R6506: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-249-7431
Fluid Passage Bolt

142497431
200576: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-521-9576
Threaded Tube Fitting Plug

145219576
1A06E0026D: RNCC: 3 | RNVC: 2

27 Sep 2000

4730-14-032-1682
Pipe Flange

140321682
CMT30E9002PL2B600: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-509-6738
Fluid Pressure Line Multiple Connector

145096738
RA1M522004261: RNCC: 3 | RNVC: 2

28 Oct 1998

4730-14-040-0735
Tube Tee

140400735
R8X6X8S: RNCC: 3 | RNVC: 2
R8SX6X8: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-201-9287
Mamelon Male

142019287
501-204-004-0: RNCC: 3 | RNVC: 2

1 Jan 1962

4730-14-387-8881
Tube Tee

143878881
788.B.06.10.10T: RNCC: 3 | RNVC: 2
788 B 06 10 10T: RNCC: 5 | RNVC: 2
788B06 10 10T: RNCC: 5 | RNVC: 2
788B06-10-10T: RNCC: 5 | RNVC: 2
788B061010T: RNCC: 5 | RNVC: 2
74788B061010T: RNCC: 5 | RNVC: 2

12 Oct 1983

4730-14-406-7525
Quick Disconnect Coupling Half

144067525
9686-02-25X30: RNCC: 3 | RNVC: 2
0686-02-25X30: RNCC: 5 | RNVC: 9

8 Jan 1986

4730-14-276-2030
Tube Fitting Brazing Ferrule

142762030
6784-1DA38: RNCC: 2 | RNVC: 2
MEC11378: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-297-9919
Sediment Strainer Element

142979919
4854-12-3LAITON: RNCC: 3 | RNVC: 2
4854-12-3LAITON: RNCC: 5 | RNVC: 9

1 Jan 1973

4730-14-200-2735
Pipe Clamp Coupling

142002735
VICTAULICECEMAT6552-100: RNCC: 3 | RNVC: 2

1 Jan 1962

4730-14-335-7883
Tube To Boss Straight Adapter

143357883
702A30-1301-20: RNCC: 3 | RNVC: 2

30 Jun 1976

4730-14-499-2078
Tube To Boss Straight Adapter

144992078
25283618-060: RNCC: 3 | RNVC: 2
103043004014A: RNCC: 3 | RNVC: 9
F300 0T 019 7756: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-408-7419
Quick Disconnect Coupling Half

144087419
RBE08-2806IAVDFBDKB: RNCC: 3 | RNVC: 2
RBE8-2806IAVDFBDKB: RNCC: 5 | RNVC: 2

2 Apr 1986

4730-14-427-3381
Tube Tee

144273381
4730HDING406,4X8,8-273X6,3: RNCC: 2 | RNVC: 2

13 Oct 1988

4730-14-449-5554
Tube Union

144495554
RACCORD IMP NPT3/8 EM S13,5: RNCC: 3 | RNVC: 2
BN329-507: RNCC: 5 | RNVC: 2

26 Aug 1991

4730-14-564-9076
Threaded Tube Fitting Plug

145649076
885753: RNCC: 3 | RNVC: 2

17 Jun 2010

4730-14-343-7262
Eq Raccord Tournant

143437262
PDP0136: RNCC: 3 | RNVC: 2

13 Jul 1977

4730-14-446-0340
Quick Disconnect Coupling Half

144460340
LR90061-12: RNCC: 3 | RNVC: 2
2467: RNCC: 5 | RNVC: 2

4 Mar 1991

4730-14-223-2896

4730-14-561-3979
Tube To Boss Straight Adapter

145613979
GE08ZSREDA3C: RNCC: 3 | RNVC: 2
GE08ZSREDA3C: RNCC: 3 | RNVC: 2
FS0003164: RNCC: 6 | RNVC: 9

10 Jul 2009

4730-14-212-3526
Raccord Equipe Spec

142123526
300153: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-325-6787
Raccord Special

143256787
0000364600: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-212-1208

4730-14-200-5740

4730-14-291-3901
Fluid Pressure Line Multiple Connector

142913901
0064870450: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-553-4812
Flange To Boss Elbow

145534812
0319727510: RNCC: 3 | RNVC: 2

5 Apr 2007

4730-14-462-0844
Pipe Flange

144620844
Z80004023: RNCC: 3 | RNVC: 2

31 Mar 1993

4730-14-419-4338
Pipe Flange

144194338
B3051FS013F9A: RNCC: 3 | RNVC: 2

19 Oct 1987

4730-14-528-6021
Sediment Strainer Element

145286021
32239001: RNCC: 3 | RNVC: 2

30 Jan 2002

4730-14-372-3046
Tube To Boss Straight Adapter

143723046
VDP7572: RNCC: 3 | RNVC: 2

1 Sep 1981

4730-14-511-6616
Quick Disconnect Coupling Half

145116616
NC4014020: RNCC: 3 | RNVC: 2

8 Jan 1999

4730-14-272-7722
Tube Tee

142727722
0000122012: RNCC: 3 | RNVC: 2
0000122012: RNCC: 5 | RNVC: 9
122012: RNCC: 5 | RNVC: 9

1 Jan 1971

4730-14-538-8950
Quick Disconnect Reducer

145388950
NGM0023075020184: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-567-3230
Flange To Tube Elbow

145673230
M4721350600000: RNCC: 3 | RNVC: 2

7 Mar 2011

4730-14-224-4191

4730-14-329-3212
Raccordement Piece

143293212
301MA0203F6: RNCC: 3 | RNVC: 2
301MA203F6: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-562-8142
Tube Elbow

145628142
CUMF8G: RNCC: 3 | RNVC: 2

24 Nov 2009

4730-14-298-0201

4730-14-576-8231
Flange To Tube Elbow

145768231
M4821341500000: RNCC: 3 | RNVC: 2

17 Jul 2013

4730-14-448-7437
Tube Fitting Socket Welded Ferrule

144487437
4730HP-3DE21,3: RNCC: 2 | RNVC: 2
Y07134-02-0000P003DE21,3: RNCC: 3 | RNVC: 2

9 Jul 1991

4730-14-333-9935
Quick Disconnect Coupling Half

143339935
RBE11-6104/IA/3: RNCC: 3 | RNVC: 2
RBE11-6104IA3: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-262-1703
Pipe Flange

142621703
7062DL1F1F41-5-5XC18: RNCC: 2 | RNVC: 2
MEC10310: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-260-0839
Raccord Traversee D

142600839
321A75-0316-20: RNCC: 3 | RNVC: 2

1 Jan 1970

Load More Results