What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Hose Tee?

A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

What is a Pipe To Tube To Hose Tee?

A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by France (FR) - NCB is 14

Page 101 of 185

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by France

47	30	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - France (FR)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 38 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 707 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 23 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 58 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 31 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 10 Items
What is a Bulkhead Hose Connector? 1849 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 281 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 743 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 182 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 17 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 134 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 85 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 95 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 11 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 41 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 4690 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 197 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 154 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 36 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 39 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 136 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 430 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 42 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 61 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 24 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 209 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 49 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 2297 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 88 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 36 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 20 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 12 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 1050 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 273 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 13 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 315 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 3610 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 174 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 38 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 53 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 220 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 53 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 24 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 12 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 11 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 4235 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 61 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 190 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 93 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 1330 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 30 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 96 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 133 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 17 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 153 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 229 Items
What is a Sediment Strainer? 663 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 267 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 25 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 14 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
Clamp,Pipe,Anchor And Reinforcement 132 Items
What is a Pipe Cap? 20 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 652 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 18 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 53 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 57 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 2175 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
Splicing Set,Hose 27 Items
What is an Air Eductor? 34 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Hose Reducer? 121 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 53 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 2329 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Hose Cross? 12 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Tube Cross? 564 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Pipe-Tube Escutcheon? 34 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 113 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 92 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 18 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 79 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Hose Clamp? 2772 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 33 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 103 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 28 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 27 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is an Air Line Manifold? 148 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 23 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Pipeline Flexible Spacer? 656 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 105 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 529 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 368 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 509 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 94 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 631 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 34 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 70 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 73 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 12 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 369 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 308 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 65 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 289 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 101 Items
What is a Pipe Fitting Assortment? 50 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 11 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 26 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 114 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 114 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 49 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Elbow? 32 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 939 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2779 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 2956 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1833 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 63 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 30 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 315 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 74 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 379 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 85 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 65 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Hose To Boss Straight Adapter? 478 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 28 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 9756 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 34 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 96 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 424 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 15 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 23 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Tube To Boss Tee? 244 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 77 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 14 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 110 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 176 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 16 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 670 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 254 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 51 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 107 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 12 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 182 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 40 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Elbow? 59 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 48 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 65 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 190 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 16 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 27 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Tube Tee? 28 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Quick Disconnect Elbow? 14 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 157 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 35 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 64 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 212 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Fitting Insert? 37 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Tube To Gas Fitting Straight Adapter? 296 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 158 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 35 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 194 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 52 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 60 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Quick-Disconnect Nipple? 197 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 32 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Boss Outlet? 177 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Pipeline Adapter? 70 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 32 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is an Exhaust-Intake Pneumatic Muffler? 65 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 33 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 22 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 25 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 58 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 123 Items
What is a Hydraulic Manifold Assembly? 74 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 34 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 13 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 24 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
Adapter,Check Valve 23 Items
Connector,Suction Pump 13 Items
Nipple,Special 183 Items
Cap,Retention,Pressure Plug 36 Items
Adapter Assembly,Filler Cap 62 Items
Steam Trap Element 16 Items
Adapter Assembly,Valve 27 Items
Adapter And Flange Assembly 30 Items
What is a Tube Coupling Assembly? 425 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 37 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 38 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 12 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 112 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Flange To Grooved Clamp Straight Adapter? 14 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 78 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Tube To Boss Swivel Joint? 107 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 22 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe Fitting Flared Collar? 25 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 52 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 25 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 119 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Coupling Retainer? 12 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Tube Coupling Nut Ring? 13 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 64 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 194 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 26 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Water Feeder Manifold? 20 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.

Stock Items From Supply Class 4730 Page 101 of 185

4730-14-351-8542
Tube To Boss Straight Adapter

143518542
1021111800: RNCC: 3 | RNVC: 2
DAH1021111800: RNCC: 5 | RNVC: 9

16 Oct 1978

4730-14-521-2589
Quick Disconnect Coupling Half

145212589
1823373020: RNCC: 3 | RNVC: 2
SYB0982: RNCC: 5 | RNVC: 2

13 Jul 2000

4730-14-325-6810
Bulkhead Hose Connector

143256810
0000365680: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-280-6669
Tube To Boss Straight Adapter

142806669
920205: RNCC: 3 | RNVC: 2

1 Jan 1971

4730-14-383-1302
Tube To Boss Straight Adapter

143831302
23S08019: RNCC: 3 | RNVC: 2

17 Mar 1983

4730-14-453-8850
Tube Tee

144538850
R1025Z12: RNCC: 3 | RNVC: 2
924564: RNCC: 5 | RNVC: 2
89472353: RNCC: 5 | RNVC: 2

12 Mar 1992

4730-14-356-6612

4730-14-278-8036

4730-14-395-3764
Tube To Boss Straight Adapter

143953764
N0189F26BREP21: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-375-7104
Tube To Boss Straight Adapter

143757104
8405162166: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-452-9779
Fluid Flow Restrictor

144529779
A87222: RNCC: 3 | RNVC: 2

29 Jan 1992

4730-14-355-1276
Fluid Pressure Line Multiple Connector

143551276
2505: RNCC: 3 | RNVC: 9

19 Mar 1979

4730-14-399-8755
Tube To Hose Straight Adapter

143998755
68106: RNCC: 3 | RNVC: 2

11 Apr 1985

4730-14-375-6994
Self-Sealing Coupling Assembly

143756994
MX80DN100TYPEA: RNCC: 3 | RNVC: 2

26 Feb 1982

4730-14-415-4037
Quick Disconnect Coupling Half

144154037
6144204: RNCC: 3 | RNVC: 2
92E0962: RNCC: 5 | RNVC: 2

11 May 1987

4730-14-562-1710
Fluid Pressure Line Multiple Connector

145621710
3538 08 10: RNCC: 3 | RNVC: 2
FS0002434: RNCC: 6 | RNVC: 9

5 Oct 2009

4730-14-310-4246

4730-14-376-3556
Pipe Flange

143763556
065-30-9013PL2DN500: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-525-6312
Return Tube Bend

145256312
20 236 913 5060: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-345-2098
Fluid Pressure Line Multiple Connector

143452098
GA29506: RNCC: 3 | RNVC: 2

5 Oct 1977

4730-14-386-9984
Tube To Boss Straight Adapter

143869984
F4BRAB18-1/2: RNCC: 3 | RNVC: 2
F4BRAB18-1/2: RNCC: 3 | RNVC: 2

24 Aug 1983

4730-14-515-4401
Tube To Boss Straight Adapter

145154401
BPMAMEL0NMF241112140X26GAA: RNCC: 3 | RNVC: 2
SOABPMAMEL0NMF241112140X26GAA: RNCC: 5 | RNVC: 9

13 Jul 1999

4730-14-540-6859
Tube To Boss Straight Adapter

145406859
38051496: RNCC: 3 | RNVC: 2
ND062448: RNCC: 5 | RNVC: 2
4848ZG8613180523: RNCC: 6 | RNVC: 9

20 Apr 2004

4730-14-371-9991
Fluid Pressure Line Multiple Connector

143719991
16559167: RNCC: 3 | RNVC: 2
16559167: RNCC: 5 | RNVC: 9

1 Sep 1981

4730-14-518-5086
Return Tube Bend

145185086
HCOXX000032: RNCC: 3 | RNVC: 9

9 Feb 2000

4730-14-263-7556
Pipe Flange

142637556
DLT001277: RNCC: 3 | RNVC: 2
DLT001277: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-348-0877
Fluid Flow Restrictor

143480877
C54911R4: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-401-6136
Flange To Tube Straight Adapter

144016136
79103372: RNCC: 3 | RNVC: 2
79103372: RNCC: 5 | RNVC: 9

13 Jun 1985

4730-14-526-7257
Tube Coupling

145267257
770 270 204: RNCC: 3 | RNVC: 2

29 Aug 2001

4730-14-350-9205
Tube To Boss Straight Adapter

143509205
91012727: RNCC: 3 | RNVC: 2

12 Jul 1978

4730-14-554-5952
Tube Fitting Insert

145545952
0000510230: RNCC: 3 | RNVC: 2

23 Jul 2007

4730-14-361-8462
Threaded Tube Fitting Plug

143618462
8812720009: RNCC: 3 | RNVC: 2

20 Feb 1980

4730-14-418-5651
Tube To Hose Straight Adapter

144185651
199405: RNCC: 3 | RNVC: 9

2 Sep 1987

4730-14-511-5892
Flange To Hose Elbow

145115892
0074881380: RNCC: 3 | RNVC: 2

6 Jan 1999

4730-14-463-0374
Tube Tee

144630374
R6BXS10: RNCC: 3 | RNVC: 2
91713715: RNCC: 5 | RNVC: 2

12 May 1993

4730-14-379-6904
Tube To Boss Straight Adapter

143796904
517250M1: RNCC: 3 | RNVC: 2
517250M1: RNCC: 5 | RNVC: 9

20 Oct 1982

4730-14-248-9858

4730-14-560-2285
Packing Nut

145602285
95724: RNCC: 3 | RNVC: 9

2 Apr 2009

4730-14-365-9656

4730-14-288-6259

4730-14-367-5063

4730-14-524-8055
Quick Disconnect Coupling Half

145248055
9A94 01 06X099: RNCC: 3 | RNVC: 2
9A94 01 06X099: RNCC: 5 | RNVC: 2

18 Apr 2001

4730-14-536-2768
Sediment Strainer Element

145362768
50007946: RNCC: 3 | RNVC: 2

24 Jul 2003

4730-14-509-6958
Tube-Hose Fitting Compression Sleeve

145096958
741.VN.20: RNCC: 3 | RNVC: 2
741VN20: RNCC: 3 | RNVC: 2
162047: RNCC: 5 | RNVC: 2
741 VN 20: RNCC: 5 | RNVC: 2
741VN20: RNCC: 5 | RNVC: 2

28 Oct 1998

4730-14-509-9018
Tube Coupling

145099018
143E993: RNCC: 3 | RNVC: 2
4730AA1096197: RNCC: 6 | RNVC: 9

4 Nov 1998

4730-14-387-3614
Tube To Boss Straight Adapter

143873614
DA2C726200103: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-328-0104

4730-14-288-1612

4730-14-574-6457
Pipe Tee

145746457
ASNA3752-060608: RNCC: 1 | RNVC: 2
PE20103-060608: RNCC: 3 | RNVC: 2

11 Feb 2013

4730-14-406-0578
Tube To Hose Straight Adapter

144060578
GE12L3-8NPT: RNCC: 3 | RNVC: 2
641856012: RNCC: 5 | RNVC: 2
GE12L3-8NPT: RNCC: 5 | RNVC: 2
431353: RNCC: 5 | RNVC: 2
GE12L3-8NPT: RNCC: 5 | RNVC: 9

8 Jan 1986

4730-14-406-9577
Hose To Boss Straight Adapter

144069577
NO PRIMARY REF14-406-9577: RNCC: 3 | RNVC: 2
25513: RNCC: 5 | RNVC: 9

22 Jan 1986

4730-14-431-4056
Tube Union

144314056
NO PRIMARY REF14-431-4056: RNCC: 3 | RNVC: 2
36090MF1/2-20X1,5INOX: RNCC: 5 | RNVC: 9

17 Apr 1989

4730-14-557-3086
Special Nipple

145573086
DET05AEBTDRM006: RNCC: 3 | RNVC: 2

2 Jun 2008

4730-14-376-6127
Bulkhead Hose Connector

143766127
31461000: RNCC: 3 | RNVC: 2
00056650000: RNCC: 5 | RNVC: 2
MAF0001004562: RNCC: 6 | RNVC: 9

28 Apr 1982

4730-14-454-8556
Sediment Strainer Element

144548556
CVFB4239CLASSE30: RNCC: 3 | RNVC: 2
PR1466: RNCC: 5 | RNVC: 2
51658: RNCC: 5 | RNVC: 2
A302402: RNCC: 5 | RNVC: 2

24 Apr 1992

4730-14-361-1927
Tube Coupling Inverted Nut

143611927
BAZ1559: RNCC: 3 | RNVC: 2

24 Jan 1980

4730-14-469-1883
Pipe Flange

144691883
DLP752490: RNCC: 3 | RNVC: 2
RAB3217: RNCC: 5 | RNVC: 2

13 Apr 1994

4730-14-376-3554
Pipe Flange

143763554
065-30-9013PL2DN250: RNCC: 3 | RNVC: 2

30 Mar 1982

4730-14-500-2513
Tube To Boss Straight Adapter

145002513
377740X1: RNCC: 3 | RNVC: 2
F300 0T 024 2569: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-518-3424
Self-Sealing Coupling Half

145183424
HPPXX000023: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-414-1442
Pipeline Flexible Spacer

144141442
1120X3L300N605: RNCC: 3 | RNVC: 2

22 Jan 1987

4730-14-514-0610
Tube To Boss Straight Adapter

145140610
RP1A741214502: RNCC: 3 | RNVC: 2

22 Apr 1999

4730-14-464-5858
Hydraulic Manifold Assembly

144645858
10175090: RNCC: 3 | RNVC: 2

11 Aug 1993

4730-14-518-2131
Tube Tee

145182131
K0070912: RNCC: 3 | RNVC: 2
RT8: RNCC: 5 | RNVC: 2

26 Jan 2000

4730-14-522-1480
Tube Coupling

145221480
0319208460: RNCC: 3 | RNVC: 2

4 Oct 2000

4730-14-363-0542
Tube Tee

143630542
1TR25X12X25: RNCC: 3 | RNVC: 2
TRA25X12X25N: RNCC: 3 | RNVC: 2
11RA25X12X25: RNCC: 3 | RNVC: 2

3 Apr 1980

4730-14-422-1001
Quick Disconnect Coupling Half

144221001
RK790A04: RNCC: 3 | RNVC: 2

23 Feb 1988

4730-14-497-6074
Tube To Boss Straight Adapter

144976074
4K6502: RNCC: 3 | RNVC: 2
F300 0T 023 4111: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-250-3995
Fluid Passage Bolt

142503995
22132: RNCC: 3 | RNVC: 2
TID1765: RNCC: 5 | RNVC: 2

1 Jan 1968

4730-14-526-4721
Fluid Pressure Line Multiple Connector

145264721
RP1M741214801: RNCC: 3 | RNVC: 2

1 Aug 2001

4730-14-435-1387
Tube-Hose Fitting Compression Sleeve

144351387
01110800: RNCC: 3 | RNVC: 2

23 Oct 1989

4730-14-554-2023
Fluid Passage Bolt

145542023
357 076: RNCC: 3 | RNVC: 2
357 076: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-14-553-1329
Tube Fitting Socket Welded Ferrule

145531329
0249840310: RNCC: 3 | RNVC: 2

6 Mar 2007

4730-14-262-1571
Pipe Flange

142621571
7062DJ1F1F87-7XC18: RNCC: 2 | RNVC: 2

1 Jan 1970

4730-14-504-0632
Tube Coupling

145040632
NNP4730878750175: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-518-3434
Tube Tee

145183434
HTEXX000027: RNCC: 3 | RNVC: 9

2 Feb 2000

4730-14-477-7329
Tube To Boss Straight Adapter

144777329
GE12PLMA3C: RNCC: 3 | RNVC: 2
GE12PLMA3C: RNCC: 5 | RNVC: 9
GE12LMA3C: RNCC: 5 | RNVC: 9

20 Sep 1995

4730-14-351-1531
Tube Tee

143511531
5438353H: RNCC: 3 | RNVC: 2
GX1319101A: RNCC: 5 | RNVC: 2

10 Aug 1978

4730-14-506-9004
Tube To Boss Straight Adapter

145069004
12 08 14150NU: RNCC: 3 | RNVC: 2

27 May 1998

4730-14-394-1542
Threaded Tube Fitting Plug

143941542
02161400: RNCC: 3 | RNVC: 2
16025310Q: RNCC: 5 | RNVC: 2
82161400: RNCC: 5 | RNVC: 2
R55233: RNCC: 5 | RNVC: 2

23 Jun 1984

4730-14-506-8515
Return Tube Bend

145068515
B46176R: RNCC: 3 | RNVC: 2

27 May 1998

4730-14-249-9094
Sediment Strainer Element

142499094
351333E: RNCC: 3 | RNVC: 2
351333E: RNCC: 5 | RNVC: 9

1 Jan 1968

4730-14-512-8338
Tube Union

145128338
212828: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-564-5507
Tube To Boss Straight Adapter

145645507
GE16SM18X1,5CFX: RNCC: 3 | RNVC: 2
A231004000322: RNCC: 5 | RNVC: 2

5 May 2010

4730-14-234-1282
Bride De Retenue Ba

142341282
506P338: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-229-3259

4730-14-339-9923

4730-14-222-3164

4730-14-432-2555
Tube Repair Plug

144322555
NCHX01H013EF5REP16TAMPON: RNCC: 3 | RNVC: 2
NCHX01H013DF5REP16TAMPON: RNCC: 5 | RNVC: 2

31 May 1989

4730-14-549-4643
Tube Coupling Assembly

145494643
0249811350: RNCC: 3 | RNVC: 2

6 Apr 2006

4730-14-504-0599
Tube Coupling

145040599
NNP4730878750146: RNCC: 3 | RNVC: 2

5 Feb 1998

4730-14-493-9365
Hydraulic System Accessories Manifold

144939365
552972: RNCC: 3 | RNVC: 2
F300 0T 014 6605: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-433-3951
Fluid Pressure Line Multiple Connector

144333951
84981217: RNCC: 3 | RNVC: 2

24 Jul 1989

4730-14-512-8095
Tube Coupling

145128095
192225: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-511-6810
Pipe Flange

145116810
10445694: RNCC: 3 | RNVC: 2

11 Jan 1999

4730-14-571-7487
Pipe Coupling

145717487
ABS0478D1212: RNCC: 1 | RNVC: 2
PE29024D12: RNCC: 3 | RNVC: 2

27 Apr 2012

4730-14-319-5516
Embase Pour Robinet

143195516
H43787: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-323-4978

4730-14-572-6901
Tube Nipple

145726901
107292: RNCC: 3 | RNVC: 2

25 Jul 2012

4730-14-453-3812
Quick Disconnect Plug

144533812
AQ10M0: RNCC: 3 | RNVC: 2

19 Feb 1992

4730-14-040-4054
Tube Tee

140404054
R6X12X12S: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-317-6937
Tube To Boss Straight Adapter

143176937
466-8M4P145: RNCC: 3 | RNVC: 2
466-8M4P145: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-317-8075
Tube Coupling Assembly

143178075
3951R32X32X25A: RNCC: 3 | RNVC: 2
3951R32X32X25A: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-530-5744
Quick Disconnect Coupling Half

145305744
SSH6-63BSPP: RNCC: 3 | RNVC: 2
SYB5232: RNCC: 5 | RNVC: 2

25 Jun 2002

4730-14-398-9936
Fluid Pressure Line Multiple Connector

143989936
670-270007: RNCC: 3 | RNVC: 2
679270007: RNCC: 5 | RNVC: 2
679270007: RNCC: 5 | RNVC: 2
679270007: RNCC: 5 | RNVC: 9
PUR670-270007: RNCC: 5 | RNVC: 9

6 Mar 1985

4730-14-366-8627
Fuel Feeder Manifold

143668627
330A58-6050-00: RNCC: 3 | RNVC: 2

20 Nov 1980

4730-14-032-0624
Sediment Strainer Element

140320624
000-62015-000: RNCC: 3 | RNVC: 2
62015: RNCC: 5 | RNVC: 2
000-62015-000: RNCC: 5 | RNVC: 2

5 Jul 1980

4730-14-295-0281
Diaphragme Special

142950281
AS34TR10BREP6: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-461-1985
Tube Union

144611985
5009913: RNCC: 3 | RNVC: 2

2 Mar 1993

4730-14-554-1909
Tube Tee

145541909
356 026: RNCC: 3 | RNVC: 2
356 026: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-14-405-3801
Threaded Tube Fitting Plug

144053801
10016-300: RNCC: 3 | RNVC: 2

27 Nov 1985

4730-14-427-8169
Tube Coupling

144278169
11 23500 0G: RNCC: 3 | RNVC: 2

11 Nov 1988

4730-14-424-6463
Tube To Boss Straight Adapter

144246463
R95405D6A: RNCC: 2 | RNVC: 2

2 Jun 1988

4730-14-278-8104

4730-14-392-3930
Tube To Boss Straight Adapter

143923930
13075010S: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-429-0270
Flange To Tube Elbow

144290270
0315710160: RNCC: 3 | RNVC: 2

4 Jan 1989

4730-14-211-2049
Tube Tee

142112049
35546: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-360-3349
Pipe Flange

143603349
NBC10AHE140: RNCC: 3 | RNVC: 2

23 Nov 1979

4730-14-417-4248
Tube To Boss Straight Adapter

144174248
150740: RNCC: 3 | RNVC: 2
75006: RNCC: 5 | RNVC: 2

8 Jul 1987

4730-14-223-0267

4730-14-342-4395

4730-14-395-3743
Obturateur

143953743
N0117F49A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-335-1347
Pipeline Flexible Spacer

143351347
I131NTE32PN16: RNCC: 2 | RNVC: 2
DILNTE32PN16: RNCC: 3 | RNVC: 2
DILNTE32PN16: RNCC: 5 | RNVC: 9

3 Jun 1976

4730-14-563-5518
Lubrication Fitting

145635518
7029006: RNCC: 3 | RNVC: 2
07029006: RNCC: 3 | RNVC: 2
7029006: RNCC: 5 | RNVC: 2

18 Feb 2010

4730-14-497-0159
Racc.Union

144970159
09036864: RNCC: 3 | RNVC: 2
F300 0T 022 5468: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-349-6814

4730-14-414-7643
Pipeline Flexible Spacer

144147643
I131NTH250SUIVANTU1194D1/273: RNCC: 2 | RNVC: 2
DILNTH250PERCEA339SUIVANTU1194: RNCC: 3 | RNVC: 2
I131NTH250-4730BAD1-273: RNCC: 5 | RNVC: 2
I131NTH250U1194D1-273: RNCC: 5 | RNVC: 2

4 Mar 1987

4730-14-500-6467
Tube Tee

145006467
XT10-SA3C: RNCC: 3 | RNVC: 2
XT10SA3C: RNCC: 3 | RNVC: 2
F300 0T 024 6653: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-311-8859
Pipe Flange

143118859
NO PRIMARY REF14-311-8859: RNCC: 3 | RNVC: 2
9569892060: RNCC: 5 | RNVC: 2
50298: RNCC: 5 | RNVC: 9

1 Jan 1974

4730-14-406-9892
Tube To Boss Straight Adapter

144069892
Q15GE12S1/2BSPK NU: RNCC: 3 | RNVC: 2
8905122166NU: RNCC: 3 | RNVC: 2

22 Jan 1986

4730-14-397-7024
Fluid Passage Bolt

143977024
GSM164-044F16: RNCC: 3 | RNVC: 2

14 Dec 1984

4730-14-378-6571
Tube To Boss Straight Adapter

143786571
LL127-CK3016S: RNCC: 3 | RNVC: 2
812030349966: RNCC: 5 | RNVC: 2

11 Aug 1982

4730-14-423-4171
Pipe Flange

144234171
UA50088006PN50-11D1DN200: RNCC: 2 | RNVC: 2
4730HCPN50DN20011D1: RNCC: 5 | RNVC: 2

19 Apr 1988

4730-14-423-8659
Hose To Boss Straight Adapter

144238659
NO PRIMARY REF14-423-8659: RNCC: 3 | RNVC: 2
C527: RNCC: 5 | RNVC: 9

4 May 1988

4730-14-388-6956
Tube Tee

143886956
F85-253: RNCC: 3 | RNVC: 9

3 Nov 1983

4730-14-378-3255
Pipe Flange

143783255
E64-35-3212-112BBRIDEDN250: RNCC: 3 | RNVC: 2

20 Jul 1982

4730-14-219-2422

4730-14-305-8348
Passage De Coque

143058348
R32806SMAR31843SMP12ET12BIS: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-306-6502
Fluid Passage Bolt

143066502
B012X125: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-464-3097
Tube To Boss Straight Adapter

144643097
RC108: RNCC: 3 | RNVC: 2

28 Jul 1993

4730-14-319-6439

4730-14-325-6807
Embout Coulissant

143256807
0000365480: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-276-0345

4730-14-228-6080

4730-14-251-6442

4730-14-484-9841
Ecrou Raccord

144849841
655506002: RNCC: 3 | RNVC: 2

17 Dec 1996

4730-14-296-8915

4730-14-538-2703
Return Tube Bend

145382703
NGM0010033882129: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-523-0292
Quick Disconnect Coupling Half

145230292
ID 18970 12: RNCC: 3 | RNVC: 2
SYB1622: RNCC: 5 | RNVC: 2
ID1897012: RNCC: 5 | RNVC: 2

19 Dec 2000

4730-14-406-9893
Tube To Boss Straight Adapter

144069893
8405142766NU: RNCC: 3 | RNVC: 2
Q15GE14S3/4BSPK NU: RNCC: 3 | RNVC: 2

22 Jan 1986

4730-14-439-7313
Embout D'adaptation

144397313
MKE02-59: RNCC: 3 | RNVC: 2

21 May 1990

4730-14-410-6775
Quick Disconnect Coupling Half

144106775
RBE8-6151: RNCC: 3 | RNVC: 2
RBE08-6151: RNCC: 3 | RNVC: 2
91328794: RNCC: 5 | RNVC: 2

9 Jul 1986

4730-14-306-3764
Tube Coupling

143063764
RT13004: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-525-7906
Tube To Boss Straight Adapter

145257906
F145312: RNCC: 3 | RNVC: 2

14 Jun 2001

4730-14-260-9209

4730-14-545-4359
Bulkhead Hose Connector

145454359
726.T.14.14S.BR: RNCC: 3 | RNVC: 2
P426T1414SBR: RNCC: 3 | RNVC: 2
726 T 14 14S BR: RNCC: 5 | RNVC: 2
74726D1414SBR: RNCC: 5 | RNVC: 2

12 Apr 2005

4730-14-249-6759
Bride Pour Montage

142496759
2-02524: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-540-5970
Tube To Boss Straight Adapter

145405970
487-8-8S: RNCC: 3 | RNVC: 2

7 Apr 2004

4730-14-377-5031
Sediment Strainer Element

143775031
2-185-500: RNCC: 3 | RNVC: 2

17 May 1982

4730-14-370-4447
Tubulure Cassante

143704447
1972-2: RNCC: 3 | RNVC: 2

18 May 1981

4730-14-213-4333
Fluid Passage Bolt

142134333
50640N: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-408-6225
Bulkhead Hose Connector

144086225
R7420Z34: RNCC: 3 | RNVC: 2

2 Apr 1986

4730-14-354-7556
Pipe Flange

143547556
150470: RNCC: 3 | RNVC: 2

20 Feb 1979

4730-14-430-4518
Tube Tee

144304518
130-26X34: RNCC: 3 | RNVC: 2

22 Mar 1989

4730-14-553-4792
Flange To Boss Elbow

145534792
0319721350: RNCC: 3 | RNVC: 2

5 Apr 2007

4730-14-288-3950
Tube To Boss Straight Adapter

142883950
0000251020: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-317-8076
Tube Coupling Assembly

143178076
3812R32A: RNCC: 3 | RNVC: 2
3812R32A: RNCC: 5 | RNVC: 9

1 Jan 1975

4730-14-552-3884
Flexible Tube Coupling Assembly

145523884
711B1212Z4: RNCC: 3 | RNVC: 2

18 Dec 2006

4730-14-541-8162
Tube Tee

145418162
4010.13.13: RNCC: 3 | RNVC: 2
LX1151A00: RNCC: 5 | RNVC: 2

26 Jun 2004

4730-14-304-0091
Pipeline Flexible Spacer

143040091
AS34TV116CF11: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-255-2786

4730-14-260-9204

4730-14-292-6968

4730-14-367-9744
Quick Disconnect Coupling Half

143679744
RBE03-2704-3DKRFB: RNCC: 3 | RNVC: 2
RBE3-2704-3DKRFB: RNCC: 5 | RNVC: 2
85-691-3479: RNCC: 6 | RNVC: 9

19 Jan 1981

4730-14-285-3531

4730-14-306-9235

4730-14-297-8959
Bloc De Derivation

142978959
411MA0162FB37: RNCC: 3 | RNVC: 2
411MA162FB37: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-359-9588

4730-14-367-7321

4730-14-237-2002
Raccord Orientable

142372002
540095: RNCC: 3 | RNVC: 2
540095: RNCC: 5 | RNVC: 2
540095: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-365-9360

4730-14-565-5138
Pipeline Flexible Spacer

145655138
3001S129: RNCC: 3 | RNVC: 2

26 Aug 2010

4730-14-400-9508
Bulkhead Hose Connector

144009508
DA2C203520710A2: RNCC: 3 | RNVC: 2

21 May 1985

4730-14-308-1266
Tube To Boss Straight Adapter

143081266
82805: RNCC: 3 | RNVC: 2
82805: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-554-0131
Tube To Boss Straight Adapter

145540131
358 433: RNCC: 3 | RNVC: 2
358 433: RNCC: 3 | RNVC: 2

7 Jun 2007

4730-14-501-1247
Tube To Boss Straight Adapter

145011247
7265029: RNCC: 3 | RNVC: 2
F300 0T 025 1647: RNCC: 6 | RNVC: 9

29 Oct 1997

4730-14-414-6571
Pipeline Flexible Spacer

144146571
DLT604376: RNCC: 3 | RNVC: 2

20 Feb 1987

4730-14-521-9559
Tube To Boss Straight Adapter

145219559
469441A: RNCC: 3 | RNVC: 2

27 Sep 2000

4730-14-484-4813
Pipe To Hose Straight Adapter

144844813
AMC26: RNCC: 3 | RNVC: 2
91590505: RNCC: 5 | RNVC: 2
91590505: RNCC: 5 | RNVC: 2

21 Nov 1996

4730-14-510-3554
Swivel Flange To Hose Straight Adapter

145103554
ALBOCOL: RNCC: 3 | RNVC: 2
4730AA8022050: RNCC: 6 | RNVC: 9

4 Nov 1998

4730-14-329-2807
Pipeline Flexible Spacer

143292807
I131NTE100MAR: RNCC: 2 | RNVC: 2
DILNTE100MAR: RNCC: 3 | RNVC: 9

2 Jul 1975

4730-14-396-4005
Tube Tee

143964005
TL16NU: RNCC: 3 | RNVC: 2

27 Nov 1984

4730-14-231-0871
Tube Tee

142310871
R8X8X12: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-409-6315
Bulkhead Hose Connector

144096315
DA1D203535941: RNCC: 3 | RNVC: 2

28 May 1986

4730-14-501-4233
Swivel Flange To Hose Elbow

145014233
C25057010: RNCC: 3 | RNVC: 2

29 Oct 1997

4730-14-426-3034
Straight Tubing Connector

144263034
A3H38445: RNCC: 3 | RNVC: 2

20 Aug 1988

4730-14-366-5936
Quick Disconnect Coupling Assembly

143665936
SEL60X63BDB: RNCC: 3 | RNVC: 2

20 Nov 1980

4730-14-382-8748
Tube To Boss Straight Adapter

143828748
PE60835H14: RNCC: 3 | RNVC: 2

26 Jul 2000

4730-14-504-5566
Sediment Strainer Element

145045566
22353205: RNCC: 3 | RNVC: 2

19 Feb 1998

4730-14-374-0591
Fluid Pressure Line Multiple Connector

143740591
181346: RNCC: 3 | RNVC: 2

8 Dec 1981

4730-14-271-3405
Bulkhead Hose Connector

142713405
5380581: RNCC: 3 | RNVC: 2
5380581: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-357-5585
Tube To Boss Straight Adapter

143575585
52-28-33X200: RNCC: 3 | RNVC: 2

30 Oct 2001

4730-14-482-0013
Tube To Boss Straight Adapter

144820013
81 34 34: RNCC: 3 | RNVC: 2

13 Jun 1996

4730-14-515-8465
Quick Disconnect Wye

145158465
03601901: RNCC: 3 | RNVC: 2
SCS03601901: RNCC: 5 | RNVC: 9

17 Aug 1999

4730-14-407-5962
Bulkhead Hose Connector

144075962
7062HA1F1-20-129E7062BA1T1UA9: RNCC: 2 | RNVC: 2

27 Feb 1986

4730-14-533-8891
Tube To Boss Straight Adapter

145338891
12-128-00: RNCC: 3 | RNVC: 2
12.128.00: RNCC: 3 | RNVC: 2

26 Feb 2003

4730-14-513-7330
Bulkhead Hose Connector

145137330
3A16LCL10NUCE: RNCC: 3 | RNVC: 2
81120601: RNCC: 5 | RNVC: 2
5005030033: RNCC: 5 | RNVC: 2

9 Apr 1999

4730-14-502-5973
Tube Tee

145025973
5005030338: RNCC: 3 | RNVC: 2

17 Dec 1997

4730-14-202-6542

4730-14-203-0276

4730-14-225-0042
Coude De Gonflement

142250042
A22480C0UDE: RNCC: 3 | RNVC: 2

1 Jan 1966

4730-14-420-4686
Hose To Boss Straight Adapter

144204686
2-433734: RNCC: 3 | RNVC: 9

10 Dec 1987

4730-14-351-0645
Tube To Boss Straight Adapter

143510645
7-033-140: RNCC: 3 | RNVC: 2

10 Aug 1978

4730-14-217-2867

4730-14-399-1523
Fluid Pressure Line Multiple Connector

143991523
78RM1-2: RNCC: 3 | RNVC: 2

6 Mar 1985

4730-14-306-7108
Valve De Jonction

143067108
DC12MECZ8DC6120XYGENE: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-572-3612
Tube Elbow

145723612
770011211: RNCC: 3 | RNVC: 2

28 Jun 2012

4730-14-366-5909

4730-14-355-7533
Tube Tee

143557533
RT7816C: RNCC: 3 | RNVC: 2

30 Oct 2001

4730-14-318-3310

4730-14-459-0713
Pipe Flange

144590713
CMT30E9030AFDE16: RNCC: 3 | RNVC: 2

18 Nov 1992

4730-14-391-7106
Tube-Hose Fitting Compression Sleeve

143917106
741PN14: RNCC: 3 | RNVC: 2
741 PN 14: RNCC: 5 | RNVC: 2
741PN14: RNCC: 5 | RNVC: 2
74741PN14: RNCC: 5 | RNVC: 2

21 Mar 1984

4730-14-217-5395

4730-14-307-8445
Tubulure Speciale

143078445
B252FD1BREP4: RNCC: 3 | RNVC: 2

1 Jan 1974

4730-14-295-6235

4730-14-260-3916

4730-14-434-7091
Adaptateur Bride

144347091
BN329515C2DN250AC: RNCC: 3 | RNVC: 2

2 Oct 1989

4730-14-236-8076

4730-14-426-7726
Tube Tee

144267726
4730HEING060,3X5,6-48,3X5: RNCC: 2 | RNVC: 2

21 Sep 1988

4730-14-237-5586
Fourrure Epaulee Sp

142375586
P32FC8X10: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-554-7079
Tube To Boss Straight Adapter

145547079
18512: RNCC: 3 | RNVC: 2

7 Aug 2007

4730-14-453-2699
Fluid Pressure Line Multiple Connector

144532699
625024: RNCC: 3 | RNVC: 2

12 Feb 1992

4730-14-554-0820
Pipe Flange

145540820
600 001: RNCC: 3 | RNVC: 2
600 001: RNCC: 3 | RNVC: 2

11 Jun 2007

4730-14-367-7740

4730-14-321-7395

4730-14-217-2554
Raccord Servocomman

142172554
24S10: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-278-8050

4730-14-330-1138

4730-14-329-4097

4730-14-555-9287
Quick Disconnect Wye

145559287
D4066857: RNCC: 3 | RNVC: 9
4066-857: RNCC: 5 | RNVC: 9

9 Jan 2008

4730-14-566-3962
Pipeline Adapter

145663962
RA1M127060: RNCC: 3 | RNVC: 2

9 Nov 2010

4730-14-332-2767
Flexible Tube Coupling Assembly

143322767
L25.GB.03: RNCC: 3 | RNVC: 2
L25GB03: RNCC: 5 | RNVC: 2

2 Jul 1975

4730-14-032-1325
Fluid Passage Bolt

140321325
7211517011: RNCC: 3 | RNVC: 2

5 Jul 1980

4730-14-395-3550
Sediment Strainer Element

143953550
10-155-81: RNCC: 3 | RNVC: 9

2 Oct 1984

4730-14-298-9698
Fluid Pressure Line Multiple Connector

142989698
100260: RNCC: 3 | RNVC: 2

1 Jan 1973

4730-14-526-8184
Tube To Boss Straight Adapter

145268184
103100006: RNCC: 3 | RNVC: 2
AX81100200: RNCC: 5 | RNVC: 2
5005030342: RNCC: 5 | RNVC: 2

7 Sep 2001

4730-14-410-6994
Flange To Tube Elbow

144106994
5172273700: RNCC: 3 | RNVC: 2
722737: RNCC: 5 | RNVC: 9

9 Jul 1986

4730-14-366-5562
Pipe Flange

143665562
16661159: RNCC: 3 | RNVC: 2
16661159: RNCC: 5 | RNVC: 9

20 Nov 1980

4730-14-540-8022
Quick Disconnect Coupling Half

145408022
E29572F35DE40: RNCC: 2 | RNVC: 2
1002.563: RNCC: 3 | RNVC: 2
1002563: RNCC: 5 | RNVC: 2

23 Apr 2004

4730-14-230-5959
Tube Coupling Assembly

142305959
3601P25A: RNCC: 3 | RNVC: 2
3601P25A: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-378-0736
Quick Disconnect Coupling Assembly

143780736
AR.12F: RNCC: 3 | RNVC: 2
AR12F: RNCC: 5 | RNVC: 2

20 Jul 1982

4730-14-448-1236
Tube To Boss Straight Adapter

144481236
0290250032: RNCC: 3 | RNVC: 2

12 Jun 1991

4730-14-459-3219
Tube To Boss Straight Adapter

144593219
DLT024600: RNCC: 3 | RNVC: 2
RAR1613: RNCC: 5 | RNVC: 2

25 Nov 1992

4730-14-285-3828
Tube To Boss Straight Adapter

142853828
90602-1: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-391-7775
Conduit Obturateur

143917775
DA2C525090260A1: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-375-0071
Raccord Special

143750071
56815: RNCC: 3 | RNVC: 2
56815: RNCC: 5 | RNVC: 2
85-691-8423: RNCC: 6 | RNVC: 9

30 Jan 1982

4730-14-219-0903
Bride A Zinc

142190903
536-410-007DET1-2DN90: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-570-3590
Hose Clamp

145703590
NO PRIMARY REF 14-570-3590: RNCC: 3 | RNVC: 2
3915318G: RNCC: 5 | RNVC: 2

9 Dec 2011

4730-14-256-0576
Raccord Vabco

142560576
UML10-14X1-25: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-413-5839
Tube Coupling

144135839
LL011-CC30S: RNCC: 3 | RNVC: 2
88773000: RNCC: 5 | RNVC: 2

17 Dec 1986

4730-14-271-3408
Manchon Double

142713408
5380584: RNCC: 3 | RNVC: 2
5380584: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-575-7848
Tube Nipple

145757848
261T3226: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-568-9025
Hose Tee

145689025
5005630135: RNCC: 1 | RNVC: 2
93402011: RNCC: 3 | RNVC: 2
20733079: RNCC: 5 | RNVC: 2

20 Jul 2011

4730-14-343-8130

4730-14-464-0502
Tube Coupling

144640502
963015: RNCC: 3 | RNVC: 2
SMD20G1/4: RNCC: 5 | RNVC: 9

13 Jul 1993

4730-14-395-3677
Embout A Souder

143953677
N0189F30A: RNCC: 3 | RNVC: 2

2 Oct 1984

4730-14-372-2699

4730-14-340-1275

4730-14-212-1186

4730-14-576-7182
Tube Union

145767182
10620357: RNCC: 3 | RNVC: 1

5 Jul 2013

4730-14-040-3410

4730-14-290-5499

4730-14-240-2606
Lot De Rechanges Tu

142402606
99355: RNCC: 3 | RNVC: 2

1 Jan 1967

4730-14-556-3237
Pipe Flange

145563237
0000372030: RNCC: 3 | RNVC: 2

25 Feb 2008

4730-14-377-2287
Serre Cable

143772287
FYCR6: RNCC: 3 | RNVC: 2

17 May 1982

4730-14-262-1621

4730-14-344-1239

4730-14-234-4810

4730-14-405-3162
Tube Coupling

144053162
F102874D: RNCC: 3 | RNVC: 2

27 Nov 1985

4730-14-404-3091
Tube To Boss Straight Adapter

144043091
GE06SMED71: RNCC: 3 | RNVC: 2
GE06SMED71: RNCC: 3 | RNVC: 2
GE6PSMED1.4571: RNCC: 5 | RNVC: 2
GE6PSMED71: RNCC: 5 | RNVC: 2
GE6PSMEDIN0X1.4571ED: RNCC: 5 | RNVC: 2

30 Sep 1985

4730-14-261-0135
Tube Coupling Assembly

142610135
3811S20A: RNCC: 3 | RNVC: 2
3811S20A: RNCC: 5 | RNVC: 9

1 Jan 1970

4730-14-447-2105
Tube To Gas Fitting Straight Adapter

144472105
BN325 526F4REPJ: RNCC: 3 | RNVC: 2

3 May 1991

4730-14-543-9682
Tube Tee

145439682
248332: RNCC: 3 | RNVC: 2

19 Dec 2004

4730-14-369-6898
Tube To Boss Straight Adapter

143696898
221358: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-263-7468
Tube Tee

142637468
T74: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-513-0786
Tube Coupling

145130786
800811227: RNCC: 3 | RNVC: 2

3 Mar 1999

4730-14-546-4988
Tube Tee

145464988
210110808: RNCC: 3 | RNVC: 2
5005030167: RNCC: 5 | RNVC: 2

8 Jul 2005

4730-14-211-4189
Tube To Boss Straight Adapter

142114189
30323: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-220-7187
Tube Coupling Inverted Nut

142207187
R5432: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-473-1941
Tube Union

144731941
4R12-16-1500RCL10: RNCC: 3 | RNVC: 2
1004494188: RNCC: 5 | RNVC: 2
5005430053: RNCC: 5 | RNVC: 2
91103801: RNCC: 5 | RNVC: 2

7 Dec 1994

4730-14-505-3358
Tube Union

145053358
GE25-PSR-ED-0MD: RNCC: 3 | RNVC: 2

18 Mar 1998

4730-14-398-1092
Support De Montage

143981092
NO PRIMARY REF14-398-1092: RNCC: 3 | RNVC: 2
A12BQ0060-034: RNCC: 5 | RNVC: 9

31 Jan 1985

4730-14-202-3764
Tube Fitting Clinch Sleeve

142023764
405-6RR: RNCC: 3 | RNVC: 2
501181: RNCC: 5 | RNVC: 2
501181: RNCC: 6 | RNVC: 9

1 Jan 1963

4730-14-321-1387
Fluid Passage Bolt

143211387
1S10-25: RNCC: 3 | RNVC: 2
1S10-25: RNCC: 5 | RNVC: 2
1S10-25A: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-410-7742
Quick Disconnect Coupling Half

144107742
RBE11-1152/IC/O: RNCC: 3 | RNVC: 2
RBE11-1152ICO: RNCC: 5 | RNVC: 2

9 Jul 1986

4730-14-303-2027
Bulkhead Hose Connector

143032027
A10-52-515-06-0: RNCC: 3 | RNVC: 2
A10-52-515-06-0: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-420-5892
Raccord Special Ech

144205892
A4H8375-NL: RNCC: 3 | RNVC: 2
A4H8375-NL-79232: RNCC: 5 | RNVC: 2
A4H8375NL: RNCC: 5 | RNVC: 2
A4H8375NL-79078: RNCC: 5 | RNVC: 2

16 Dec 1987

4730-14-487-5680
Flexible Tube Coupling Assembly

144875680
3615-32D: RNCC: 3 | RNVC: 2
3615-32D: RNCC: 5 | RNVC: 9

10 Apr 1997

4730-14-547-8443
Pipe Flange

145478443
B4-007: RNCC: 3 | RNVC: 2
V800856: RNCC: 5 | RNVC: 2

18 Nov 2005

4730-14-387-3677
Tube Tee

143873677
0294202210: RNCC: 3 | RNVC: 2
302-283-402P: RNCC: 5 | RNVC: 2

15 Sep 1983

4730-14-536-1005
Tube Union

145361005
803228555018: RNCC: 3 | RNVC: 2

9 Jul 2003

4730-14-263-8832
Raccord

142638832
17-9-1456: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-334-2674
Tube To Boss Straight Adapter

143342674
GSM514-001F28: RNCC: 3 | RNVC: 2
GSM514-01F28: RNCC: 5 | RNVC: 2
411MA741REP2: RNCC: 5 | RNVC: 2
A0210-004F29: RNCC: 5 | RNVC: 2

23 Apr 1976

4730-14-544-3954
Quick Disconnect Coupling Half

145443954
RBE06 1101/OD/JE: RNCC: 3 | RNVC: 2
BO20148: RNCC: 5 | RNVC: 2

26 Jan 2005

4730-14-213-4166
Tube To Boss Straight Adapter

142134166
610-190-009-0: RNCC: 3 | RNVC: 2

1 Jan 1964

4730-14-366-5053
Vidange Mot Raccord

143665053
NO PRIMARY REF14-366-5053: RNCC: 3 | RNVC: 2
Z49325: RNCC: 5 | RNVC: 9

20 Nov 1980

4730-14-556-7379
Hose Tee

145567379
8130 1612: RNCC: 3 | RNVC: 2

8 Apr 2008

4730-14-486-3896
Tube To Boss Straight Adapter

144863896
0165181000: RNCC: 3 | RNVC: 2

12 Mar 1997

4730-14-369-4398
Quick Disconnect Coupling Half

143694398
M0F6GY1-4: RNCC: 3 | RNVC: 2

17 Apr 1981

4730-14-438-8295
Tube Coupling

144388295
DLT130857: RNCC: 3 | RNVC: 2

9 Apr 1990

4730-14-342-2201

4730-14-342-5982
Fluid Pressure Line Multiple Connector

143425982
9009CPH4010001: RNCC: 3 | RNVC: 2

16 May 1977

4730-14-361-0367
Pipe Flange

143610367
075-20-4011DN200: RNCC: 3 | RNVC: 2

19 Dec 1979

4730-14-258-9125
Tube To Boss Straight Adapter

142589125
711679: RNCC: 3 | RNVC: 9
062711679: RNCC: 5 | RNVC: 9

1 Jan 1969

4730-14-402-0370
Fluid Pressure Line Multiple Connector

144020370
205914: RNCC: 3 | RNVC: 2

26 Jun 1985

4730-14-515-7479
Pipe To Hose Straight Adapter

145157479
89090408103519A: RNCC: 3 | RNVC: 2

28 Jul 1999

4730-14-434-7674
Tube To Boss Straight Adapter

144347674
19121162: RNCC: 3 | RNVC: 2
19121162: RNCC: 5 | RNVC: 9

4 Oct 1989

4730-14-390-9945
Fluid Passage Bolt

143909945
52S0601101: RNCC: 3 | RNVC: 2

1 Mar 1984

4730-14-479-6545
Fluid Pressure Line Multiple Connector

144796545
1108-910C: RNCC: 3 | RNVC: 2

30 Jan 1996

4730-14-214-5687
Fluid Pressure Line Multiple Connector

142145687
0000473968: RNCC: 3 | RNVC: 2
0000473968: RNCC: 5 | RNVC: 9
473968: RNCC: 5 | RNVC: 9

1 Jan 1965

4730-14-438-0012
Tube To Hose Straight Adapter

144380012
4A18L22X150C0: RNCC: 3 | RNVC: 2
104105365: RNCC: 5 | RNVC: 2
5000819372: RNCC: 5 | RNVC: 2

5 Mar 1990

4730-14-423-8971
Flange To Hose Straight Adapter

144238971
05427408: RNCC: 3 | RNVC: 2
E05427408: RNCC: 5 | RNVC: 2

5 May 1988

4730-14-480-9033
Tube Tee

144809033
M4ZS460D8664: RNCC: 3 | RNVC: 2

11 Apr 1996

4730-14-233-1330

4730-14-565-3909
Tube Coupling

145653909
GZ18LCF: RNCC: 3 | RNVC: 2
A231004000497: RNCC: 5 | RNVC: 2

12 Aug 2010

4730-14-216-5331

4730-14-360-2762

4730-14-567-9660
Hose Clamp

145679660
3913101380830: RNCC: 3 | RNVC: 2

29 Apr 2011

4730-14-569-0857
Bulkhead Hose Connector

145690857
PE65001D12: RNCC: 3 | RNVC: 2

5 Aug 2011

4730-14-254-5835

4730-14-575-7773
Flange To Tube Straight Adapter

145757773
M2811350000000: RNCC: 3 | RNVC: 2

30 Apr 2013

4730-14-567-5445
Tube Elbow

145675445
ABS1352E08: RNCC: 1 | RNVC: 2
ABS1352E08: RNCC: 3 | RNVC: 2
ABS1352E08: RNCC: 5 | RNVC: 2

24 Mar 2011

4730-14-567-3238
Flange To Tube Elbow

145673238
M4721350200000: RNCC: 3 | RNVC: 2

7 Mar 2011

4730-14-262-1526

4730-14-328-0074
Tu Droit Adaptateur

4730-14-372-7947
Tu Droit Adaptateur

4730-14-564-4320
Tube Coupling

145644320
8931293892: RNCC: 3 | RNVC: 2
A231004000064: RNCC: 5 | RNVC: 2

28 Apr 2010

4730-14-575-4171
Water Feeder Manifold

145754171
391033: RNCC: 3 | RNVC: 2

4 Apr 2013

4730-14-225-2713

4730-14-224-2659

4730-14-215-1525
Raccord Special Equ

142151525
C20V: RNCC: 3 | RNVC: 2

1 Jan 1965

4730-14-426-7385
Tube Tee

144267385
4730HEEG114,3X12,5: RNCC: 2 | RNVC: 2

20 Sep 1988

4730-14-314-2965

4730-14-434-3641
Tube Coupling

144343641
45152676: RNCC: 3 | RNVC: 2

20 Sep 1989

4730-14-532-0388
Pipe To Hose Straight Adapter

145320388
0RK36400: RNCC: 3 | RNVC: 2
0RK36400: RNCC: 5 | RNVC: 9

9 Oct 2002

4730-14-503-2039
Tube Coupling

145032039
RA1M502123162: RNCC: 3 | RNVC: 2

7 Jan 1998

4730-14-546-3275
Tube Coupling

145463275
AE99143G: RNCC: 3 | RNVC: 2

24 Jun 2005

4730-14-389-8185
Fluid Pressure Line Multiple Connector

143898185
84981621: RNCC: 3 | RNVC: 2

20 Dec 1983

4730-14-538-6398
Tube Coupling Assembly

145386398
NGM0010060076644: RNCC: 2 | RNVC: 2

9 Dec 2003

4730-14-389-9324
Fluid Pressure Line Multiple Connector

143899324
BAZ5600: RNCC: 3 | RNVC: 2

26 Jan 1984

4730-14-381-3996
Pipe Flange

143813996
222574: RNCC: 3 | RNVC: 2

25 Jan 1983

4730-14-262-1878
Sediment Strainer Element

142621878
M44836: RNCC: 3 | RNVC: 9

1 Jan 1970

4730-14-475-4168
Tube Coupling

144754168
20606-50A: RNCC: 3 | RNVC: 2

5 Apr 1995

4730-14-368-2874

4730-14-237-0728

4730-14-335-0431

4730-14-232-0162
Fluid Passage Bolt

142320162
3560-6XC18CD: RNCC: 3 | RNVC: 2
2768: RNCC: 5 | RNVC: 1

1 Jan 1967

4730-14-300-0591
Tube To Boss Straight Adapter

143000591
15513: RNCC: 3 | RNVC: 2
50759N: RNCC: 5 | RNVC: 2
81135: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-387-5673
Tube Fitting Brazing Ferrule

143875673
438230: RNCC: 3 | RNVC: 2

15 Sep 1983

4730-14-364-0499
Collect Distri Huil

143640499
365A75-2247-01: RNCC: 3 | RNVC: 2

7 Aug 1980

4730-14-382-0698
Tube To Boss Straight Adapter

143820698
01012027: RNCC: 3 | RNVC: 2
1012027: RNCC: 5 | RNVC: 2
0101-20-27: RNCC: 5 | RNVC: 2
85-692-3230: RNCC: 6 | RNVC: 9

25 Jan 1983

4730-14-360-7605
Tube To Boss Straight Adapter

143607605
0611-60: RNCC: 3 | RNVC: 2
602560: RNCC: 5 | RNVC: 2
4-015380: RNCC: 5 | RNVC: 2
5000497628: RNCC: 5 | RNVC: 2
5000497628: RNCC: 5 | RNVC: 9

19 Dec 1979

4730-14-424-3212
Quick Disconnect Coupling Half

144243212
RBE06-2102/OD/FB: RNCC: 3 | RNVC: 2
RBE06-2102-ODFB: RNCC: 5 | RNVC: 2
91623887: RNCC: 5 | RNVC: 2

19 May 1988

4730-14-514-3211
Tube Fitting Insert

145143211
18PR000A0494N: RNCC: 3 | RNVC: 2
213EPA64400-001-D: RNCC: 5 | RNVC: 2

11 May 1999

4730-14-428-9906
Buse Ejecteur

144289906
3/694/1/03000-7A: RNCC: 3 | RNVC: 2
13-42-54BUSE: RNCC: 5 | RNVC: 1

3 Jan 1989

4730-14-444-2626
Tube Tee

144442626
EN10242-ZA1-3/4-FE-A: RNCC: 2 | RNVC: 2
770221105: RNCC: 3 | RNVC: 2
221 3-4: RNCC: 5 | RNVC: 2
770 221 105: RNCC: 5 | RNVC: 2
12352: RNCC: 5 | RNVC: 2
385484: RNCC: 5 | RNVC: 9
E29801Z1E: RNCC: 5 | RNVC: 9
F300 0T 005 8864: RNCC: 6 | RNVC: 9

20 Dec 1990

4730-14-348-8777
Pipe Flange

143488777
300-674-601-0: RNCC: 3 | RNVC: 2
300-674-601P: RNCC: 5 | RNVC: 2
001252010A: RNCC: 5 | RNVC: 2

19 Apr 1978

4730-14-293-1011
Tube Fitting Brazing Ferrule

142931011
3505A1-16AG: RNCC: 3 | RNVC: 2
3505A1-16XC38: RNCC: 5 | RNVC: 2

1 Jan 1973

4730-14-235-3391
Tube To Boss Straight Adapter

142353391
13-16-15-21: RNCC: 3 | RNVC: 2
UFA16X15-21N: RNCC: 3 | RNVC: 2
6A16-15-21: RNCC: 3 | RNVC: 2
UF16-21: RNCC: 3 | RNVC: 2
0946660035: RNCC: 5 | RNVC: 2
0946660035: RNCC: 5 | RNVC: 9
946660035: RNCC: 5 | RNVC: 9

1 Jan 1967

4730-14-565-7751
Quick Disconnect Coupling Half

145657751
FIGURE901F-BRONZE-DN100: RNCC: 3 | RNVC: 2
901F-INOX-DN100: RNCC: 5 | RNVC: 2
FIG.901F-BRONZE-DN100: RNCC: 5 | RNVC: 2

22 Sep 2010

4730-14-557-0904
Pipe Elbow

145570904
717202: RNCC: 3 | RNVC: 2

7 May 2008

4730-14-561-6735
Tube Fitting Insert

145616735
1490086: RNCC: 3 | RNVC: 2

19 Aug 2009

4730-14-414-2458
Piece De Raccordeme

144142458
ECHH251: RNCC: 3 | RNVC: 2

28 Jan 1987

4730-14-562-8054
Tube Elbow

145628054
5010650047: RNCC: 1 | RNVC: 2
EV25SVOMDCF: RNCC: 3 | RNVC: 2
20865614: RNCC: 5 | RNVC: 2

24 Nov 2009

4730-14-392-3953
Corps Filtre Ebauch

143923953
401MA0579EBAUCHE: RNCC: 3 | RNVC: 2

21 Mar 1984

4730-14-416-1052
Tube To Boss Straight Adapter

144161052
F0532S4710X0002-9602: RNCC: 3 | RNVC: 2
S4710X0002-9602: RNCC: 3 | RNVC: 2

3 Jun 1987

4730-14-549-6878
Quick Disconnect Coupling Half

145496878
PIA 06.1102/LD: RNCC: 3 | RNVC: 2

26 Apr 2006

4730-14-455-8889
Racc0rd

144558889
NO PRIMARY REF14-455-8889: RNCC: 3 | RNVC: 2
JICM7-16: RNCC: 5 | RNVC: 9

11 Jun 1992

4730-14-465-5340
Fluid Flow Restrictor

144655340
A82045-30: RNCC: 3 | RNVC: 2

30 Sep 1993

4730-14-324-7760
Tube Tee

143247760
GSM163-004F6AVECECROUSRACCORD: RNCC: 3 | RNVC: 2
GSM163-04F6AVECECR0USRACC0RD: RNCC: 5 | RNVC: 2

1 Jan 1975

4730-14-344-4664
Fluid Pressure Line Multiple Connector

143444664
EA1M711-11: RNCC: 3 | RNVC: 2

10 Aug 1977

4730-14-246-3098
Quick Disconnect Coupling Half

142463098
R01-103: RNCC: 2 | RNVC: 2

1 Jan 1968

4730-14-536-3353
Swivel Retaining Pipe Flange

145363353
D05/4313: RNCC: 3 | RNVC: 2

29 Jul 2003

4730-14-410-8862
Quick Disconnect Coupling Half

144108862
RBE06-7151/IC/JE: RNCC: 3 | RNVC: 2
RBE06-7151ICJE: RNCC: 5 | RNVC: 2

23 Jul 1986

4730-14-518-3757
Quick Disconnect Coupling Half

145183757
RBE11.7103/IC/JV/HP: RNCC: 3 | RNVC: 2

2 Feb 2000

4730-14-332-3665
Fluid Pressure Line Multiple Connector

143323665
702A30-0618-20: RNCC: 3 | RNVC: 2

2 Jul 1975

4730-14-507-4447
Distilling Nozzle Assembly

145074447
984-58024-01/R1491: RNCC: 3 | RNVC: 2
NNP4610929204659: RNCC: 5 | RNVC: 2
984-58024-01: RNCC: 5 | RNVC: 9

7 Jul 1998

4730-14-560-6133
Sediment Strainer

145606133
10359315: RNCC: 3 | RNVC: 2

5 May 2009

4730-14-426-1076
Raccord Equipe

144261076
8814020267: RNCC: 3 | RNVC: 2

4 Aug 1988

4730-14-319-3605

4730-14-290-5505

4730-14-258-1764

4730-14-563-0118
Hose To Boss Straight Adapter

145630118
21114.G21.08: RNCC: 3 | RNVC: 2

15 Dec 2009

4730-14-321-6713
Fluid Passage Bolt

143216713
0235550050: RNCC: 3 | RNVC: 2

1 Jan 1975

4730-14-385-7069
Tube Tee

143857069
G2J: RNCC: 3 | RNVC: 2

26 Jul 1983

4730-14-040-0102
Tube To Boss Straight Adapter

140400102
0249830270: RNCC: 3 | RNVC: 2

1 Jan 1972

4730-14-392-9152
Fluid Passage Bolt

143929152
0000290670: RNCC: 3 | RNVC: 2

7 Apr 1984

4730-14-444-9457
Fluid Pressure Line Multiple Connector

144449457
561117: RNCC: 3 | RNVC: 2

29 Jan 1991

4730-14-319-6786

4730-14-334-2647

4730-14-326-8329

4730-14-263-7471
Tube Tee

142637471
T68: RNCC: 3 | RNVC: 2

1 Jan 1970

4730-14-524-2914
Pipeline Flexible Spacer

145242914
51S1071431A: RNCC: 3 | RNVC: 2
1071431A: RNCC: 5 | RNVC: 2

9 Mar 2001

4730-14-428-7218
Pipe Flange

144287218
01-2525B: RNCC: 3 | RNVC: 2

14 Dec 1988

4730-14-272-9634

4730-14-220-7183

4730-14-495-9034
Union

144959034
5005130059: RNCC: 3 | RNVC: 2
F300 0T 020 4666: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-307-4550
Raccord Air Equipe

143074550
5005A: RNCC: 3 | RNVC: 2
5-005A: RNCC: 3 | RNVC: 2
5005-1A: RNCC: 5 | RNVC: 2

1 Jan 1974

4730-14-256-0544
Raccord Vabco

142560544
UMB14-3-8CYUA9NFEM: RNCC: 3 | RNVC: 2

1 Jan 1969

4730-14-514-3623
Tube-Hose Fitting Compression Sleeve

145143623
NO PRIMARY REF14-514-3623: RNCC: 3 | RNVC: 2
NNP4730860757635: RNCC: 5 | RNVC: 2
BAGUE BICONIQUE PR 32X36: RNCC: 5 | RNVC: 2

12 May 1999

4730-14-287-5125
Tube Tee

142875125
E29801B1DZ: RNCC: 2 | RNVC: 2
50 1-2Z: RNCC: 3 | RNVC: 2
130 1-2Z: RNCC: 3 | RNVC: 2
91705006: RNCC: 5 | RNVC: 2
21305: RNCC: 5 | RNVC: 2
002900033: RNCC: 5 | RNVC: 9
2900033: RNCC: 5 | RNVC: 9

1 Jan 1972

4730-14-281-3126
Raccord Souple

142813126
112008-03: RNCC: 3 | RNVC: 2
650-485-063-0: RNCC: 5 | RNVC: 2

1 Jan 1971

4730-14-542-5030
Quick Disconnect Coupling Half

145425030
LL6-HP31BS-143: RNCC: 3 | RNVC: 2
LL6H31BS143: RNCC: 5 | RNVC: 9

21 Jul 2004

4730-14-436-8470
Hose Coupling Assembly

144368470
DA2C729002250A1: RNCC: 3 | RNVC: 2

3 Jan 1990

4730-14-346-4568
Fluid Passage Bolt

143464568
DLT012949: RNCC: 3 | RNVC: 2

12 Dec 1977

4730-14-439-3700
Tube Coupling Assembly

144393700
13601S32A: RNCC: 3 | RNVC: 2
13601S32A: RNCC: 5 | RNVC: 9

25 Apr 1990

4730-14-348-1283
Fluid Pressure Line Multiple Connector

143481283
A11A522360011U1: RNCC: 3 | RNVC: 2

29 Mar 1978

4730-14-483-2805
Hose Coupling Assembly

144832805
DA2C729004630A1: RNCC: 3 | RNVC: 2

29 Aug 1996

4730-14-512-7648
Fluid Pressure Line Multiple Connector

145127648
800041498: RNCC: 3 | RNVC: 2

24 Feb 1999

4730-14-552-1105
Straight Tubing Connector

145521105
0000380420: RNCC: 3 | RNVC: 2

27 Nov 2006

4730-14-326-1072

4730-14-253-8342
Bouchon Filete

142538342
2-07294: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-426-7979
Tube Tee

144267979
4730HEING273X8,8-76,1X2,9: RNCC: 2 | RNVC: 2

22 Sep 1988

4730-14-471-9173
Bulkhead Hose Connector

144719173
1/2PPA76,1-85MM: RNCC: 3 | RNVC: 2

27 Sep 1994

4730-14-393-9192
Tube To Boss Straight Adapter

143939192
7012-9: RNCC: 3 | RNVC: 2

23 Jun 1984

4730-14-433-6000
Quick Disconnect Coupling Half

144336000
5622-6-6: RNCC: 3 | RNVC: 2
91597463: RNCC: 5 | RNVC: 2

2 Aug 1989

4730-14-398-2081
Equip Support Canal

143982081
304-690-901-0: RNCC: 3 | RNVC: 2

31 Jan 1985

4730-14-365-9442

4730-14-353-8964

4730-14-244-6903

4730-14-496-0988
Tube Union

144960988
022375-22P: RNCC: 3 | RNVC: 2
F300 0T 020 8965: RNCC: 6 | RNVC: 9

15 Oct 1997

4730-14-367-0437

4730-14-248-1459

4730-14-290-8224

4730-14-576-1836
Flange To Flange Straight Adapter

145761836
M2821324320100: RNCC: 3 | RNVC: 2

4 Jun 2013

4730-14-355-2221

4730-14-561-0689
Hydraulic System Accessories Manifold

145610689
8037248B00: RNCC: 3 | RNVC: 2

11 Jun 2009

4730-14-253-1029
Raccord Special

142531029
202280: RNCC: 3 | RNVC: 2

1 Jan 1968

4730-14-418-1245
Tube To Boss Straight Adapter

144181245
059900J01TRA: RNCC: 3 | RNVC: 2
059900J: RNCC: 5 | RNVC: 2

6 Aug 1987

4730-14-409-6307
Bulkhead Hose Connector

144096307
DA1D203535411: RNCC: 3 | RNVC: 2

28 May 1986

4730-14-348-4698

4730-14-313-9415

4730-14-570-5127
Special-Shaped Hose Clamp

145705127
487 7012-80: RNCC: 3 | RNVC: 2
487 7012-80: RNCC: 5 | RNVC: 2

21 Dec 2011

4730-14-286-4506
Raccord Tournant

142864506
A24929-10: RNCC: 3 | RNVC: 2
A24929-10: RNCC: 5 | RNVC: 2

1 Jan 1972

4730-14-339-9015
Tube Coupling Assembly

143399015
0-3951S16X10X16A: RNCC: 3 | RNVC: 2
0-3951S16X10X16A: RNCC: 5 | RNVC: 9
85-688-9436: RNCC: 6 | RNVC: 9

18 Jan 1977

4730-14-321-1825

Load More Results