What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Tube To Hose Tee?

A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.

What is a Tube Coupling Inverted Nut?

A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.

What is a Hose Coupling Nut?

A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.

What is a Tube Coupling Nut?

A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.

What is an Union Tailpiece?

An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.

What is an Union Thread Piece?

An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.

What is a Tube Swing Joint?

A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.

What is a Pipe Swivel Joint?

A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.

What is a Sediment Strainer?

A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - Germany (DE)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by Germany (DE) - NCB is 12

Page 78 of 84

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by Germany

47	30	12	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - Germany (DE)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 46 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 290 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 41 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 13 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 16 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 14 Items
What is a Bulkhead Hose Connector? 18 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 87 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 118 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 52 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Expansion Ring? 15 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 30 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 16 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 187 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 13 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 256 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 2053 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 154 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Pipe To Hose Straight Adapter? 68 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 457 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 617 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Pipe Bushing? 29 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Hose Nipple? 89 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 190 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 1155 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 70 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 339 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Tube Union? 17 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 333 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Tube Bend? 18 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 10 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 229 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Pipe Flange? 954 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Machine Thread Plug? 80 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Tube Lateral? 31 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 148 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 184 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Tube Tee? 186 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Tube Tee? 2053 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 26 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Tube Coupling Inverted Nut? 219 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 36 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 795 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is an Union Tailpiece? 119 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 110 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Tube Swing Joint? 22 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 46 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 10 Items
What is a Sediment Strainer? 193 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 12 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Pipe Repair Clamp? 13 Items: A Pipe Repair Clamp (CLAMP,REPAIR,PIPE) is a one-piece or two-piece metal clamp generally used with gasket(s) and designed to repair longitudinal splits and pit holes and/or to support thin walls in a straight run of pipe. See also CLAMP, LEAK REPAIR, PIPE COUPLING.
What is a Pipe Cap? 100 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 331 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Pipe Coupling? 233 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 1120 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 831 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
What is a Hose Reducer? 78 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 237 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 1726 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Pipe Cross? 18 Items: A Pipe Cross (CROSS,PIPE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is designed to be used as a junction at the intersection of pipe and/or pipe fittings.
What is a Pipe To Tube Cross? 26 Items: A Pipe To Tube Cross (CROSS,PIPE TO TUBE) is a fitting having four branches in the same plane whose axes form right angles. One or more of the connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. The remaining connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It may have side inlet(s).
What is a Tube Cross? 113 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Spool Piece? 13 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Hose Clamp? 2201 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 12 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Fuel Feeder Manifold? 15 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Pipe Clamp Coupling? 84 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is an Air Line Manifold? 46 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Pipeline Flexible Spacer? 884 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 338 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 147 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 239 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 195 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 161 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 39 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Water Well Strainer? 10 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 10 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Fluid Flow Restrictor? 130 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 21 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Self-Sealing Coupling Half? 147 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 93 Items
What is a Water Distribution Nozzle? 68 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 55 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 30 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 84 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Sediment Strainer Element? 461 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 2064 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 895 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 1147 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Sediment Strainer Body? 40 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is an Union Nut? 368 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Quick Disconnect Coupling Assembly? 214 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
Nozzle,Sand Blast 10 Items
What is a Magnetic Machine Thread Plug? 15 Items: A Magnetic Machine Thread Plug (PLUG,MACHINE THREAD,MAGNETIC) is a threaded machine thread plug with integral magnet in the body usually used in lubricating or hydraulic systems.
What is a Magnetic Pipe Plug? 37 Items: A Magnetic Pipe Plug (PLUG,PIPE,MAGNETIC) is a pipe fitting primarily designed for installation in a lubrication or hydraulic system. It has an integral magnet in the body and external pipe threads.
What is a Hose To Boss Straight Adapter? 465 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 152 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 5243 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 44 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 52 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Tube To Boss Elbow? 468 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Tube To Boss Tee? 235 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 95 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Boss Nipple? 29 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 13 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Tube Outlet? 17 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 93 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 31 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 84 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 39 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 330 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Flange Elbow? 67 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 10 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 72 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Pipe Elbow? 51 Items: A Flange To Pipe Elbow (ELBOW,FLANGE TO PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 286 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Flange Tee? 34 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Pipe Tee? 14 Items: A Flange To Pipe Tee (TEE,FLANGE TO PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a pipe or pipe fitting.
What is a Quick Disconnect Cap? 101 Items: A Quick Disconnect Cap (CAP,QUICK DISCONNECT) is a fluid line fitting having an internal quick disconnect feature, designed to fit over a fitting with an external quick disconnect feature, to block the flow of fluid.
What is a Quick Disconnect Elbow? 36 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 63 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 15 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 13 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Suction Strainer? 56 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Coupling Swage Ferrule? 18 Items: A Tube Coupling Swage Ferrule (FERRULE,SWAGE,TUBE COUPLING) is a flanged cylindrical metallic item used with a plain end tube and swaged in place. It is designed to be used as a component part of a flexible or rigid tube coupling.
What is a Tube Fitting Insert? 20 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Fluid-Emulsion Spray Nozzle? 245 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Tube-Hose Adapter Body? 42 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Quick-Disconnect Nipple? 18 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 10 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Flange To Flange Straight Adapter? 20 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Branched Tubing Connector? 23 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
Connector,Tubing,Straight 181 Items
What is a Hydraulic Manifold Assembly? 50 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Hose Fitting Swaging Socket? 46 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 31 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
Nipple,Special 39 Items
Adapter And Flange Assembly 30 Items
Socket Assembly,Hose Flange 34 Items
What is a Tube Coupling Assembly? 10 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 16 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 20 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Special-Shaped Hose Clamp? 15 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Non-Metallic Connecting Sleeve? 16 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Hydraulic Swivel Joint? 753 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 21 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.

Stock Items From Supply Class 4730 Page 78 of 84

4730-12-370-7271
Hose Clamp

123707271
2529 2104-085: RNCC: 3 | RNVC: 2

14 Dec 2006

4730-12-333-3950
Hose Clamp

123333950
DIN3017-AL130-150W5: RNCC: 2 | RNVC: 2
TORRO130-150/9-C7W5: RNCC: 3 | RNVC: 2

10 Dec 1993

4730-12-147-3793
Tube To Boss Straight Adapter

121473793
3230F333: RNCC: 3 | RNVC: 2
071845: RNCC: 5 | RNVC: 2

30 May 1969

4730-12-186-5689
Tube Nipple

121865689
DIN2353-ES16-ST-A3P: RNCC: 2 | RNVC: 2
E16-S/A3P: RNCC: 3 | RNVC: 2
P-GV 16 S: RNCC: 3 | RNVC: 2
G16-PS-A3P: RNCC: 3 | RNVC: 2
112752: RNCC: 3 | RNVC: 2
SGV16SVERZ: RNCC: 5 | RNVC: 9
G16PSA3P: RNCC: 5 | RNVC: 9
G16SA3K: RNCC: 5 | RNVC: 9
ES16DIN2353STA3K: RNCC: 5 | RNVC: 9

16 Jan 1981

4730-12-701-1101
Union Thread Piece

127011101
VG95211-ML-127011101: RNCC: 2 | RNVC: 2
4 OST1 11354-73: RNCC: 3 | RNVC: 2

6 Feb 1995

4730-12-170-8270
Hose Clamp

121708270
DIN3017-B1-23X12-W1-1: RNCC: 2 | RNVC: 2
VG95930SA23X12-W1: RNCC: 2 | RNVC: 2
S23/12SKZ: RNCC: 3 | RNVC: 2
S23-12ZY: RNCC: 5 | RNVC: 2

12 Aug 1977

4730-12-146-2616
Fluid Passage Bolt

121462616
5055752: RNCC: 3 | RNVC: 2
50-5-5752: RNCC: 5 | RNVC: 9
50.5.5752: RNCC: 5 | RNVC: 9
50.5.5752/5: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-340-5083
Tube Nipple

123405083
ISO8434-1-S-S20-ST-A3P: RNCC: 2 | RNVC: 2
DIN3902-S20-ST-A3P: RNCC: 2 | RNVC: 9
06710702121: RNCC: 5 | RNVC: 2
ERSETZT 4730-12-318-1913: RNCC: 5 | RNVC: 9

24 Apr 1996

4730-12-315-2099
Pr Anschluszstueck

123152099
2102-15.16-00: RNCC: 3 | RNVC: 2
8.216.414.000: RNCC: 5 | RNVC: 2

1 Oct 1988

4730-12-190-1244
Tube Coupling Inverted Nut

121901244
VG85044-A18-2.1050.01: RNCC: 2 | RNVC: 2
316-203001-50: RNCC: 3 | RNVC: 2
316-203001-70: RNCC: 5 | RNVC: 2
VG85044/A18-300: RNCC: 5 | RNVC: 2
A18VG85044-2-1050-01: RNCC: 5 | RNVC: 9
A18VG85044-2.1050.01: RNCC: 5 | RNVC: 9

9 Nov 1981

4730-12-313-1889
Flange To Tube Straight Adapter

123131889
P-896448-407: RNCC: 3 | RNVC: 2
P896448-407: RNCC: 5 | RNVC: 2

10 Mar 1988

4730-12-171-9669
Tube Nipple

121719669
DIN2353-RL22-SOMS: RNCC: 2 | RNVC: 2
RL22DIN2353S0MS: RNCC: 2 | RNVC: 2
SV22LS0MS: RNCC: 3 | RNVC: 2
S-GSV 22 L-SOMS59: RNCC: 3 | RNVC: 2
137305: RNCC: 3 | RNVC: 2
SGSV22LS0MS: RNCC: 5 | RNVC: 2

5 Dec 1977

4730-12-163-8141
Hose Coupling Nut

121638141
DIN3293-R3/4"-RG5-GALNI8CRGL: RNCC: 2 | RNVC: 2
R3-4DIN3293RG5GALNI8CRGL: RNCC: 5 | RNVC: 9
R3/4"DIN3293-RG5-GALNI8CRGL: RNCC: 5 | RNVC: 9
R3/4DIN3293-RG5-GALNI8CRGL: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-361-6527
Hose Clamp

123616527
17400004: RNCC: 3 | RNVC: 2
540R/18PLUS: RNCC: 5 | RNVC: 2

30 Oct 2003

4730-12-304-6185
Tube Coupling

123046185
SK514-061230.000.0: RNCC: 3 | RNVC: 2

6 Aug 1985

4730-12-700-9591
Pipe To Tube Cross

127009591
VG95211-ML-127009591: RNCC: 2 | RNVC: 2
2786A-6-8M-1: RNCC: 3 | RNVC: 2

6 Feb 1995

4730-12-366-7191
Hose Clamp

123667191
DIN3017-A-230-250X13-W5: RNCC: 2 | RNVC: 2

31 May 2005

4730-12-315-4932
Tube To Boss Straight Adapter

123154932
GE16-PS/M18X1,5: RNCC: 3 | RNVC: 2

29 Oct 1988

4730-12-364-3670
Tube Reducer

123643670
RED-V 30/20 S: RNCC: 3 | RNVC: 2
RED30/20SOMD: RNCC: 3 | RNVC: 2

15 Sep 2004

4730-12-198-7625
Tube Cap

121987625
2500082-280000.05.0: RNCC: 2 | RNVC: 2
2500082-280000.05.0: RNCC: 3 | RNVC: 2
2500082-280000-05-0: RNCC: 5 | RNVC: 2

23 Feb 1984

4730-12-350-3355
Tube Elbow

123503355
ISO8434-1-SWEC-S20-ST-A3P: RNCC: 2 | RNVC: 2
ZS15/1-29/S20V: RNCC: 3 | RNVC: 2
DIN2353-DDS20-ST-A3P: RNCC: 5 | RNVC: 9

16 Mar 2000

4730-12-193-5526
Tube To Boss Straight Adapter

121935526
1135255-F: RNCC: 3 | RNVC: 2
1135255: RNCC: 5 | RNVC: 9
C6LO1135255: RNCC: 5 | RNVC: 9

3 Aug 1982

4730-12-302-2721
Tube To Boss Elbow

123022721
5641801: RNCC: 3 | RNVC: 2
P-EWEV 35 LM: RNCC: 3 | RNVC: 2
CKE35L1126213: RNCC: 3 | RNVC: 2
EVW35-PLM: RNCC: 3 | RNVC: 2
158401: RNCC: 3 | RNVC: 2
7091911: RNCC: 5 | RNVC: 2
S-EWEV35LM: RNCC: 5 | RNVC: 2

13 Dec 1984

4730-12-131-6430
Pipe Flange

121316430
6-0403-06-8-1470: RNCC: 3 | RNVC: 9
70-140N1040RG: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-701-6072
Pipe Union

127016072
VG95211-ML-127016072: RNCC: 2 | RNVC: 2
5.12.7003.1060.05: RNCC: 3 | RNVC: 2

6 Feb 1995

4730-12-124-1080
Tube Tee

121241080
8DIN7619-6S: RNCC: 2 | RNVC: 2
8DIN7619FLUSZSTAHL: RNCC: 5 | RNVC: 2
DIN7619-8-6S: RNCC: 5 | RNVC: 2

30 May 1969

4730-12-390-1276
Hose Clamp

123901276
DIN3017-B1-6X7-W1-2: RNCC: 2 | RNVC: 2

9 Oct 2012

4730-12-340-0341
Fluid Flow Restrictor

123400341
P-616848-003: RNCC: 3 | RNVC: 2
P616848-003: RNCC: 5 | RNVC: 2

16 Feb 1996

4730-12-701-5318
Tube Elbow

127015318
VG95211-ML-127015318: RNCC: 2 | RNVC: 2
5.12.6105.1202.98: RNCC: 3 | RNVC: 2

6 Feb 1995

4730-12-307-3082
Tube To Boss Straight Adapter

123073082
23176-208582.03.0: RNCC: 3 | RNVC: 2
H4486-406-4: RNCC: 5 | RNVC: 2

3 Jun 1986

4730-12-128-8483
Fluid Passage Bolt

121288483
1202 5601: RNCC: 3 | RNVC: 2
1202 5601: RNCC: 5 | RNVC: 9
12025601: RNCC: 5 | RNVC: 9
26-23-108-4: RNCC: 5 | RNVC: 9
26.23-108.4: RNCC: 5 | RNVC: 9
3-415-0-350-004-4: RNCC: 5 | RNVC: 9
3.415.0.350.004.4: RNCC: 5 | RNVC: 9
3.415.0.350.004.4: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-351-8709
Tube Elbow

123518709
EN4021-08: RNCC: 2 | RNVC: 2

6 Sep 2000

4730-12-701-3743
Tube Elbow

127013743
VG95211-ML-127013743: RNCC: 2 | RNVC: 2
5.12.5305.0271.98: RNCC: 3 | RNVC: 2

6 Feb 1995

4730-12-702-6167
Tube Elbow

127026167
VG95211-ML-127026167: RNCC: 2 | RNVC: 2
6086A-4-6: RNCC: 3 | RNVC: 2

6 Apr 1995

4730-12-196-1847
Pipe Elbow

121961847
3/4"X1/2"-A1DIN2950: RNCC: 2 | RNVC: 2
DIN2950-3/4"X1/2"-A1: RNCC: 5 | RNVC: 2

9 Jun 1983

4730-12-135-7470
Pipe Elbow

121357470
3/4"-A4DIN2950VERZINKT: RNCC: 2 | RNVC: 2
DIN2950-92-3/4V: RNCC: 2 | RNVC: 2
GF92-3/4V: RNCC: 3 | RNVC: 2
NR92-3/4V: RNCC: 3 | RNVC: 2
605094: RNCC: 5 | RNVC: 2
61211230: RNCC: 5 | RNVC: 2
3-4INA4DIN2950VERZINKT: RNCC: 5 | RNVC: 2
3-4INA4DIN2952VZK: RNCC: 5 | RNVC: 2

30 May 1969

4730-12-316-4501
Fluid-Emulsion Spray Nozzle

123164501
2.637-064.0: RNCC: 3 | RNVC: 2
2.637-064: RNCC: 5 | RNVC: 9

18 Jan 1989

4730-12-354-6833
Tube Tee

123546833
01080610U: RNCC: 3 | RNVC: 2
6.386-387.0: RNCC: 5 | RNVC: 2
6.386-387: RNCC: 5 | RNVC: 9

15 Aug 2001

4730-12-186-4499
Quick Disconnect Coupling Half

121864499
VX50-2 1/2": RNCC: 3 | RNVC: 2
5-5383: RNCC: 5 | RNVC: 2
V50-2 1-2IN: RNCC: 5 | RNVC: 2

30 Dec 1980

4730-12-361-4957
Hose Clamp

123614957
DIN3017-A-25-40X13-W4: RNCC: 2 | RNVC: 2
1215 1680: RNCC: 3 | RNVC: 2

8 Oct 2003

4730-12-124-3391
Hose Clamp

121243391
IDEAL-W109016: RNCC: 3 | RNVC: 2
IDEAL0A: RNCC: 5 | RNVC: 9
IDEAL15/12: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-334-5968
Tube Nipple

123345968
XG25-S-1.4571: RNCC: 3 | RNVC: 2

27 May 1994

4730-12-360-7779
Hose Clamp

123607779
314252: RNCC: 3 | RNVC: 2
SK2/125/25X1: RNCC: 5 | RNVC: 2

8 Jul 2003

4730-12-145-1616
Adapter Bushing

121451616
909613816: RNCC: 3 | RNVC: 2
7101-60-106.03: RNCC: 5 | RNVC: 9
7101-60-106-03: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-124-2404
Pipe Reducer

121242404
1-4INX1-8INN4DIN2950: RNCC: 2 | RNVC: 2
DIN2950-241-1/4X1/8: RNCC: 2 | RNVC: 2
51117501: RNCC: 5 | RNVC: 2

30 May 1969

4730-12-175-8467
Sediment Strainer

121758467
08-180R1 1/4: RNCC: 3 | RNVC: 2
08-180: RNCC: 5 | RNVC: 2
08-180R1 1/4": RNCC: 5 | RNVC: 2
RE4-7: RNCC: 5 | RNVC: 9

23 Oct 1978

4730-12-330-3839
Hose Clamp

123303839
DIN3017-B1-8X7-W4: RNCC: 2 | RNVC: 2

9 Dec 1992

4730-12-194-3967
Tube To Hose Elbow

121943967
1272-0006-820306: RNCC: 3 | RNVC: 2

28 Oct 1982

4730-12-365-1947
Tube Elbow

123651947
30108: RNCC: 3 | RNVC: 2

7 Dec 2004

4730-12-147-6329
Tube To Boss Straight Adapter

121476329
3250F18783: RNCC: 3 | RNVC: 2

30 May 1969

4730-12-355-4002
Tube Elbow

123554002
0029908271: RNCC: 3 | RNVC: 2

12 Nov 2001

4730-12-321-1395
Tube Coupling Nut

123211395
UEM-16S: RNCC: 3 | RNVC: 2
M16-S-1.4571: RNCC: 3 | RNVC: 2
M16-S-71: RNCC: 5 | RNVC: 2

2 Apr 1990

4730-12-348-1496
Quick Disconnect Coupling Half

123481496
HP-006-0-XX251-01-0: RNCC: 3 | RNVC: 2

22 Apr 1999

4730-12-364-0657
Hose Clamp

123640657
AC-SEE-14,0: RNCC: 3 | RNVC: 2

18 Aug 2004

4730-12-700-8659
Tube Coupling Nut

127008659
VG95211-ML-127008659: RNCC: 2 | RNVC: 2
155N1391-8: RNCC: 3 | RNVC: 2

6 Feb 1995

4730-12-357-1863
Tube Reducer

123571863
ER12/10L1180606: RNCC: 3 | RNVC: 2

16 May 2002

4730-12-363-4758
Tube To Boss Straight Adapter

123634758
2122278: RNCC: 3 | RNVC: 2
GE10SRA3C: RNCC: 3 | RNVC: 2
ZS15-01/S10RB: RNCC: 5 | RNVC: 2

18 Jun 2004

4730-12-191-4711
Pipe Cap

121914711
FB1044-40-5: RNCC: 3 | RNVC: 2
FB1044-40-5: RNCC: 5 | RNVC: 9

4 Feb 1982

4730-12-363-0104
Tube Fitting Flared Sleeve

123630104
2940.22909: RNCC: 3 | RNVC: 2

24 Apr 2004

4730-12-386-1720
Quick Disconnect Coupling Half

123861720
2084455: RNCC: 3 | RNVC: 2
AMKL19AL: RNCC: 3 | RNVC: 2
4KP205: RNCC: 5 | RNVC: 2
2084455: RNCC: 5 | RNVC: 2

15 Aug 2011

4730-12-344-3665
Tube To Boss Straight Adapter

123443665
5203011000: RNCC: 3 | RNVC: 2
81981816055: RNCC: 5 | RNVC: 2

21 Oct 1997

4730-12-144-3553
Threaded Tube Fitting Plug

121443553
806A18003: RNCC: 3 | RNVC: 2
373725: RNCC: 5 | RNVC: 2
806A18003/1: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-343-4233
Hydraulic Swivel Joint

123434233
0.17-531: RNCC: 3 | RNVC: 2
017-1552VD: RNCC: 5 | RNVC: 9
017531: RNCC: 5 | RNVC: 9
F300 0T 022 5368: RNCC: 6 | RNVC: 9

18 Jun 1997

4730-12-385-9744
Tube Elbow

123859744
WS 8 S-1.4571: RNCC: 3 | RNVC: 2
WAL025587: RNCC: 5 | RNVC: 2

27 Jul 2011

4730-12-131-1061
Tube To Boss Straight Adapter

121311061
GAI6LM22X1-5SA47: RNCC: 3 | RNVC: 2
1633-022: RNCC: 5 | RNVC: 2
1633022: RNCC: 5 | RNVC: 2
8410872: RNCC: 5 | RNVC: 2
8938100200: RNCC: 5 | RNVC: 2
201VS00: RNCC: 5 | RNVC: 9
GAI6LM22X1,5SA47: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-189-0606
Tube Nipple

121890606
IB-15-100/L6: RNCC: 3 | RNVC: 2
GS 6 L-D: RNCC: 3 | RNVC: 2
L6N92801A: RNCC: 3 | RNVC: 2
GS6L-DVERZ: RNCC: 5 | RNVC: 2
169617001: RNCC: 5 | RNVC: 2
01245229: RNCC: 5 | RNVC: 9
1245229EZ8931-40: RNCC: 5 | RNVC: 9
L6N92801A: RNCC: 5 | RNVC: 9
N92801AL6: RNCC: 5 | RNVC: 9

24 Aug 1981

4730-12-701-3793
Blind Pipe Flange

127013793
VG95211-ML-127013793: RNCC: 2 | RNVC: 2
5.12.5305.1308.98: RNCC: 3 | RNVC: 2

6 Feb 1995

4730-12-197-7812
Tube To Hose Straight Adapter

121977812
2.013010.7: RNCC: 3 | RNVC: 2
0009972875: RNCC: 3 | RNVC: 2
D14X1,5-6: RNCC: 5 | RNVC: 2
6-645-0315: RNCC: 5 | RNVC: 2
TK-BA35-4730-393: RNCC: 5 | RNVC: 2

23 Nov 1983

4730-12-366-5323
Fluid-Emulsion Spray Nozzle

123665323
6.906-754.0: RNCC: 3 | RNVC: 2
6.906-754: RNCC: 5 | RNVC: 2

3 May 2005

4730-12-358-0056
Tube Elbow

123580056
WSS12L-1.4571: RNCC: 3 | RNVC: 2

30 Aug 2002

4730-12-339-0290
Tube Elbow

123390290
23176-032000.01.0: RNCC: 3 | RNVC: 2

28 Sep 1995

4730-12-329-9444
Blind Pipe Flange

123299444
M-LOT-000000-30028-412: RNCC: 3 | RNVC: 2
M-LOT-000000-30028-412: RNCC: 5 | RNVC: 9

15 Oct 1992

4730-12-154-1409
Tube To Boss Straight Adapter

121541409
S12MDIN3931-B-1.4571: RNCC: 2 | RNVC: 2
XGE12-SM/STOSZ-1.4571: RNCC: 3 | RNVC: 2
DIN3931-S12MB-1.4571: RNCC: 5 | RNVC: 2
XGE12SMST0SZ1-4571: RNCC: 5 | RNVC: 9
XGE12SMST0SZ1.4571: RNCC: 5 | RNVC: 9
S12MDIN3931B1-4571: RNCC: 5 | RNVC: 9
809656: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-195-8191
Tube Nipple

121958191
WBTX-S12: RNCC: 3 | RNVC: 2
6 9.20.42.082 0: RNCC: 5 | RNVC: 2
WBTX-S12: RNCC: 5 | RNVC: 2

20 Apr 1983

4730-12-383-3277
Tube To Boss Straight Adapter

123833277
GEV 14S-R 1.2-1.4571: RNCC: 3 | RNVC: 2
61110378: RNCC: 3 | RNVC: 2

7 Oct 2010

4730-12-315-1796
Tube Coupling Inverted Nut

123151796
1.025-00.02.040.16.00/07: RNCC: 3 | RNVC: 9

27 Sep 1988

4730-12-123-0969
Fluid Passage Bolt

121230969
3366170EE0152-20: RNCC: 3 | RNVC: 2
0152-20-01-08: RNCC: 5 | RNVC: 2
0336 6170: RNCC: 5 | RNVC: 2
0795-175: RNCC: 5 | RNVC: 2
0795175: RNCC: 5 | RNVC: 2
8434857: RNCC: 5 | RNVC: 2
3366170: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-328-4152
Tube To Hose Elbow

123284152
5077 304 189: RNCC: 3 | RNVC: 2
5077304189: RNCC: 5 | RNVC: 2
3.3390-0092.1: RNCC: 5 | RNVC: 9

16 May 1992

4730-12-311-6815
Tube To Boss Straight Adapter

123116815
0501 300 152: RNCC: 3 | RNVC: 2
509657: RNCC: 5 | RNVC: 2
03.3511-5200.1: RNCC: 5 | RNVC: 9

6 Oct 1987

4730-12-303-4007
Hydraulic Swivel Joint

123034007
WHO6-LMOMDVI-A3K: RNCC: 3 | RNVC: 2

20 Mar 1985

4730-12-384-5001
Hose To Boss Straight Adapter

123845001
250206: RNCC: 3 | RNVC: 2
260M-12-1/4: RNCC: 5 | RNVC: 2

1 Mar 2011

4730-12-700-3953
Hose Cap

127003953
65-15135333503: RNCC: 2 | RNVC: 2
153.006.004.003: RNCC: 5 | RNVC: 9

24 Apr 1992

4730-12-172-1265
Hydraulic Swivel Joint

121721265
NS12M18SVERZ: RNCC: 3 | RNVC: 2
SWVE12SMVERZ: RNCC: 3 | RNVC: 2
151652: RNCC: 3 | RNVC: 2
06736014504: RNCC: 5 | RNVC: 2
91622141: RNCC: 5 | RNVC: 2
06.73601-4504: RNCC: 5 | RNVC: 9
AS12MGB147A4C: RNCC: 5 | RNVC: 9

22 Dec 1977

4730-12-347-7787
Tube Elbow

123477787
2500136-8056.00: RNCC: 2 | RNVC: 2
623.7808: RNCC: 3 | RNVC: 2
316706: RNCC: 5 | RNVC: 2
7808: RNCC: 5 | RNVC: 2

9 Feb 1999

4730-12-324-7437
Tube To Boss Straight Adapter

123247437
2146-71-02.50: RNCC: 3 | RNVC: 2

21 Mar 1991

4730-12-325-8943
Tube Reducer

123258943
5184: RNCC: 3 | RNVC: 2
FT6100131-124: RNCC: 5 | RNVC: 2

19 Jul 1991

4730-12-358-0019
Tube Tee

123580019
EL8-PSM-ED-OMD: RNCC: 3 | RNVC: 2

29 Aug 2002

4730-12-382-2503
Pipe To Tube Straight Adapter

123822503
G2021-12-10S: RNCC: 3 | RNVC: 2

27 May 2010

4730-12-352-1462
Fluid Pressure Line Multiple Connector

123521462
3109914: RNCC: 3 | RNVC: 2

20 Oct 2000

4730-12-357-1255
Pipe Flange

123571255
5583562: RNCC: 2 | RNVC: 2
5583562: RNCC: 3 | RNVC: 2

8 May 2002

4730-12-389-1059
Pipe Reducer

123891059
201 880-202: RNCC: 3 | RNVC: 2

29 May 2012

4730-12-348-8712
Sound Isolation Coupling Assembly

123488712
245/4672-09-00-00: RNCC: 3 | RNVC: 2

30 Aug 1999

4730-12-359-3297
Pipeline Flexible Spacer

123593297
0260-70-600-480-VG95964 TEIL3: RNCC: 3 | RNVC: 2
VG95964-0260-70-600-480: RNCC: 5 | RNVC: 9

24 Jan 2003

4730-12-700-3454
Tube Coupling Nut

127003454
51-170446034: RNCC: 2 | RNVC: 2
20-23-14: RNCC: 3 | RNVC: 2

29 Jan 1992

4730-12-338-5809
Hose To Boss Straight Adapter

123385809
TS10-0184: RNCC: 3 | RNVC: 2

31 Jul 1995

4730-12-324-7680
Fluid Passage Bolt

123247680
23303-160000.14: RNCC: 2 | RNVC: 2
619-23.00.123-02E: RNCC: 3 | RNVC: 2

22 Mar 1991

4730-12-183-6338
Verschluszbutzen

121836338
VS6H3107: RNCC: 3 | RNVC: 2
1164629EY8931-07: RNCC: 5 | RNVC: 2
01164629: RNCC: 5 | RNVC: 2

6 May 1980

4730-12-122-4297
Tube To Boss Straight Adapter

121224297
XGE8LMSA344: RNCC: 3 | RNVC: 2
1483356047: RNCC: 5 | RNVC: 2
0009971572: RNCC: 5 | RNVC: 2
8931005604: RNCC: 5 | RNVC: 2
05699300010: RNCC: 5 | RNVC: 9
GEKLEIN8LM12X1-5SA344: RNCC: 5 | RNVC: 9
WRV111G4X: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-139-7776
Fluid Passage Bolt

121397776
0-13-15058: RNCC: 3 | RNVC: 2
0039882: RNCC: 5 | RNVC: 2
10212249009: RNCC: 5 | RNVC: 2

30 May 1969

4730-12-345-8600
Pipeline Flexible Spacer

123458600
E02-26-332 39505/2-6: RNCC: 3 | RNVC: 2

6 May 1998

4730-12-171-1295
Pipe To Tube Elbow

121711295
DIN2353-GS10-ST: RNCC: 2 | RNVC: 2
GS10DIN2353ST: RNCC: 2 | RNVC: 2
WE10R3-8KS: RNCC: 3 | RNVC: 2
WE10-SR: RNCC: 3 | RNVC: 2
6-603-0223: RNCC: 5 | RNVC: 2
580 2406: RNCC: 5 | RNVC: 2
WE10-PSR: RNCC: 5 | RNVC: 2
WE10SR: RNCC: 5 | RNVC: 9

9 Sep 1977

4730-12-167-4782
Tube To Boss Straight Adapter

121674782
XGE6LM12X1-5ASA332A3K: RNCC: 3 | RNVC: 2
707022: RNCC: 3 | RNVC: 2
XGE6LM12X1,5ASA332A3K: RNCC: 5 | RNVC: 9

23 Dec 1976

4730-12-177-0656
Tube Nipple

121770656
00250566: RNCC: 3 | RNVC: 2
R1-4INN95-9S20K00250566: RNCC: 5 | RNVC: 2

12 Jan 1979

4730-12-315-3712
Tube Reducer

123153712
IB-EGIXL12-LL16: RNCC: 3 | RNVC: 2
865093: RNCC: 3 | RNVC: 2
91512168: RNCC: 5 | RNVC: 2
6.997.389.045: RNCC: 5 | RNVC: 2

18 Oct 1988

4730-12-189-1160
Sediment Strainer Body

121891160
MK25/1MUFFENAUSFUHRUNGZOLL1/2IN: RNCC: 3 | RNVC: 2
MUFFENAUSFUEHRUNG MK25/1 DN1/2: RNCC: 5 | RNVC: 2

31 Aug 1981

4730-12-350-5515
Tube To Boss Straight Adapter

123505515
909617040: RNCC: 2 | RNVC: 2
IB15-010/LL16MA16X1,5-K: RNCC: 3 | RNVC: 2
909617040: RNCC: 5 | RNVC: 2

13 Apr 2000

4730-12-302-8734
Flange To Tube Straight Adapter

123028734
4-181242: RNCC: 3 | RNVC: 2
284870: RNCC: 5 | RNVC: 2

5 Feb 1985

4730-12-151-6273
Tube To Boss Straight Adapter

121516273
2360-103040.02.0: RNCC: 2 | RNVC: 2
2360-103040.02.0: RNCC: 3 | RNVC: 2
2360-103040.02.0: RNCC: 5 | RNVC: 2
2360-103040-02-0: RNCC: 5 | RNVC: 2
2360-103040.02.0: RNCC: 5 | RNVC: 2
2360-103040-02-0: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-135-3132
Pipe Union

121353132
1 1-4INU11DIN2950VERZINKT: RNCC: 2 | RNVC: 2
DIN2950-340-1 1/4V: RNCC: 2 | RNVC: 2

30 May 1969

4730-12-026-1915

4730-12-026-0831

4730-12-180-7239
Tube To Boss Elbow

121807239
81981100023: RNCC: 3 | RNVC: 2

28 Sep 1979

4730-12-164-3723
Fluid Passage Bolt

121643723
B405-138-1: RNCC: 3 | RNVC: 2
0000921871: RNCC: 5 | RNVC: 2

30 May 1969

4730-12-325-0758
Tube To Boss Tee

123250758
0853543000: RNCC: 3 | RNVC: 2
06.71762.8411: RNCC: 5 | RNVC: 2
06717628411: RNCC: 5 | RNVC: 2
M7.831-60L12M22X1,5-ST-A-MAN272P: RNCC: 5 | RNVC: 2
0 8 53 54 30 00: RNCC: 5 | RNVC: 2

29 Apr 1991

4730-12-368-0991
Hose Clamp

123680991
FX08 25-45 A6-W4: RNCC: 3 | RNVC: 2
FX08 25-45 A6-W4: RNCC: 5 | RNVC: 2

6 Dec 2005

4730-12-145-5115
Tube To Boss Straight Adapter

121455115
15-070-22-16: RNCC: 3 | RNVC: 2
70000002262560: RNCC: 5 | RNVC: 2
2262560: RNCC: 5 | RNVC: 9
15070-22-16: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-336-1558
Pr Anschluszstueck

123361558
2101-12-10.00: RNCC: 3 | RNVC: 2

2 Nov 1994

4730-12-328-6791
Tube To Boss Straight Adapter

123286791
GES 10 LR-WD: RNCC: 3 | RNVC: 2
GE10-LR-ED-OMD-A3P: RNCC: 3 | RNVC: 2

13 Jun 1992

4730-12-350-3234
Tube Cap

123503234
ROVD-12S: RNCC: 3 | RNVC: 2

15 Mar 2000

4730-12-144-4251
Pipe To Tube Straight Adapter

121444251
4-0224-0213-0: RNCC: 3 | RNVC: 2
909561603: RNCC: 5 | RNVC: 2
7101-45-04-35: RNCC: 5 | RNVC: 9
7101-45-04.35: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-318-5137
Tube Nipple

123185137
P-ESV 12 S: RNCC: 3 | RNVC: 2
ESV12-PS-A3P: RNCC: 3 | RNVC: 2

21 Jul 1989

4730-12-300-9059
Fluid Passage Bolt

123009059
3521800472: RNCC: 3 | RNVC: 2

11 Sep 1984

4730-12-040-6167

4730-12-173-4611
Tube To Boss Straight Adapter

121734611
EGES15LMWD: RNCC: 3 | RNVC: 2
XEVGE15LMED: RNCC: 3 | RNVC: 2
764201: RNCC: 3 | RNVC: 2
4174541: RNCC: 5 | RNVC: 2

18 Apr 1978

4730-12-198-4797
Packing Nut

121984797
DIN86005-V16-CUZN40PB2: RNCC: 2 | RNVC: 2
V16DIN86005-CUZN40PB2: RNCC: 5 | RNVC: 2

1 Feb 1984

4730-12-198-4918
Tube Reducer

121984918
SLT50.4-4404: RNCC: 3 | RNVC: 2
SLT50-4-4404: RNCC: 5 | RNVC: 2

2 Feb 1984

4730-12-361-0206
Hose Clamp

123610206
TORRO100-120/13-C7-W5: RNCC: 3 | RNVC: 2
103234: RNCC: 5 | RNVC: 2
SGT100-120/13C7-W5: RNCC: 5 | RNVC: 9

8 Aug 2003

4730-12-149-4335
Fluid-Emulsion Spray Nozzle

121494335
NO PRIMARY REF 12-149-4335: RNCC: 3 | RNVC: 2
J020204: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-701-8534
Tube Tee

127018534
VG95211-ML-127018534: RNCC: 2 | RNVC: 2
5710A-4: RNCC: 3 | RNVC: 2
0500840365090: RNCC: 5 | RNVC: 2

6 Feb 1995

4730-12-313-9482
Quick Disconnect Coupling Half

123139482
LP-006-0-WR513-22-1-VH: RNCC: 3 | RNVC: 2
LP-006-0-WR513-22-1-OV: RNCC: 5 | RNVC: 2
75076.005: RNCC: 5 | RNVC: 9
75076.005: RNCC: 5 | RNVC: 9

25 May 1988

4730-12-393-5052
Tube To Hose Straight Adapter

123935052
4379970172: RNCC: 3 | RNVC: 2
0026272074: RNCC: 3 | RNVC: 2

19 Sep 2013

4730-12-196-8079
Pipe Nipple

121968079
DIN2990-1/2-1.4571: RNCC: 2 | RNVC: 2
6.387-410.0: RNCC: 5 | RNVC: 2

18 Aug 1983

4730-12-304-6072
Flange To Tube Straight Adapter

123046072
K-GFV 12 L-35: RNCC: 3 | RNVC: 2
K-GFV12L-35-A3P: RNCC: 5 | RNVC: 2
KGFV12L35A3P: RNCC: 5 | RNVC: 2

5 Aug 1985

4730-12-144-3743
Flange To Tube Elbow

121443743
1903359602: RNCC: 3 | RNVC: 2
0-604722: RNCC: 5 | RNVC: 2
0374-67-023-0: RNCC: 5 | RNVC: 2
NRV216-14Z: RNCC: 5 | RNVC: 2

30 May 1969

4730-12-318-6594
Tube Coupling Nut

123186594
31.895-S2 PART NO 4: RNCC: 3 | RNVC: 2
31895-S2-4: RNCC: 5 | RNVC: 2
31.895-S2 PART NO 4: RNCC: 5 | RNVC: 9
31895-S2-4: RNCC: 5 | RNVC: 9

4 Aug 1989

4730-12-188-4756
Tube Elbow

121884756
KL22DIN2353-1.4571: RNCC: 2 | RNVC: 2
DIN2353-KL22-1.4571: RNCC: 2 | RNVC: 2
K22L1104011-1.4571: RNCC: 3 | RNVC: 2
3621613: RNCC: 3 | RNVC: 2
120306: RNCC: 3 | RNVC: 2
S-WV 22 L-1.4571: RNCC: 3 | RNVC: 2
W22-PL-1.4571: RNCC: 3 | RNVC: 2
KL22DIN2353X10CRNIM0TI1810: RNCC: 5 | RNVC: 2
S-WV22L-1.4571: RNCC: 5 | RNVC: 2

13 Jul 1981

4730-12-187-8562
Tube To Boss Straight Adapter

121878562
DIN2353-CL6-1.4571: RNCC: 2 | RNVC: 2
GE6LM1-4571: RNCC: 3 | RNVC: 2
0115 1059: RNCC: 5 | RNVC: 2
CL6DIN2353-1.4571: RNCC: 5 | RNVC: 2

13 May 1981

4730-12-198-2367
Pipe To Tube Straight Adapter

121982367
F3BXS6-1/8: RNCC: 3 | RNVC: 2
95-75614: RNCC: 5 | RNVC: 2

4 Jan 1984

4730-12-300-8704
Quick Disconnect Coupling Half

123008704
MD-012-0-D1222-00-2-SI-Z32: RNCC: 3 | RNVC: 2
1-MD-012-0-D1222-00-2-SI-Z32: RNCC: 5 | RNVC: 2

6 Sep 1984

4730-12-161-1350
Tube Tee

121611350
VG95211-ML-121611350: RNCC: 2 | RNVC: 2
160-71796-48: RNCC: 3 | RNVC: 2
160-71796-48: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-390-0740
Sediment Strainer

123900740
6.777-469.0: RNCC: 3 | RNVC: 2

1 Oct 2012

4730-12-701-8574
Pipe To Tube Elbow

127018574
VG95211-ML-127018574: RNCC: 2 | RNVC: 2
6 OST1 10331-72: RNCC: 3 | RNVC: 2

6 Feb 1995

4730-12-372-3757
Quick Disconnect Coupling Assembly Parts Kit

123723757
03.9305-1044.2/02: RNCC: 3 | RNVC: 2

11 Jul 2007

4730-12-343-7852
Sediment Strainer

123437852
16053-2A(A): RNCC: 3 | RNVC: 2

28 Jul 1997

4730-12-376-7128
Pipe To Tube Elbow

123767128
8CMTXSS: RNCC: 3 | RNVC: 2

30 Oct 2008

4730-12-326-6118
Quick Disconnect Cap

123266118
LP-007-5-11: RNCC: 3 | RNVC: 2

15 Oct 1991

4730-12-173-1941
Verschluszbutzen

121731941
STO16-S: RNCC: 3 | RNVC: 2
BUZ16-S: RNCC: 3 | RNVC: 2
477701177: RNCC: 5 | RNVC: 2
4196400: RNCC: 5 | RNVC: 2
455893J: RNCC: 5 | RNVC: 2
RAR1309: RNCC: 5 | RNVC: 2
BUZ16S: RNCC: 5 | RNVC: 9

23 Mar 1978

4730-12-332-6228
Union Nut

123326228
02-02-020-04-01.5: RNCC: 3 | RNVC: 2
02-02-020-04-01-5: RNCC: 5 | RNVC: 2

31 Aug 1993

4730-12-309-3912
Tube Tee

123093912
ETS 10 S: RNCC: 3 | RNVC: 2
XEVT10-S: RNCC: 3 | RNVC: 2
15/2-290/S10: RNCC: 3 | RNVC: 2
760641: RNCC: 3 | RNVC: 2
C4133279-J: RNCC: 5 | RNVC: 2

21 Jan 1987

4730-12-133-8794
Pipe Elbow

121338794
1 1-2INA1DIN2950: RNCC: 2 | RNVC: 2
DIN2950-90-1 1/2: RNCC: 2 | RNVC: 2
1 1-2INA1DIN2952: RNCC: 5 | RNVC: 2

30 May 1969

4730-12-171-3874
Tube Tee

121713874
06717700456: RNCC: 3 | RNVC: 2
06.71770-0456: RNCC: 5 | RNVC: 2
M7.831-80-L6/12/12-ST-MAN272: RNCC: 5 | RNVC: 2
L12-6-12M7-831-80ML001: RNCC: 5 | RNVC: 9

7 Oct 1977

4730-12-356-6579
Quick Disconnect Coupling Assembly

123566579
TL4730-0031-D1: RNCC: 2 | RNVC: 2
TK-4730-041D: RNCC: 5 | RNVC: 9

20 Mar 2002

4730-12-375-3386
Quick Disconnect Cap

123753386
1-LP-012-5-01-2-GL: RNCC: 3 | RNVC: 2
909734326: RNCC: 5 | RNVC: 2

20 May 2008

4730-12-329-5111
Pipe To Tube Straight Adapter

123295111
4280G-28/1": RNCC: 3 | RNVC: 2

26 Aug 1992

4730-12-358-5908
Tube To Boss Straight Adapter

123585908
GES 10 L/3/8 NPT: RNCC: 3 | RNVC: 2
2311404000: RNCC: 3 | RNVC: 2
037536: RNCC: 5 | RNVC: 2

28 Oct 2002

4730-12-315-6088
Pipeline Flexible Spacer

123156088
VG95959-80ROT1B-BZ-AM: RNCC: 2 | RNVC: 2
VG95959-80ROT1B-BZ-AM: RNCC: 3 | RNVC: 2

11 Nov 1988

4730-12-322-1763
Tube To Boss Straight Adapter

123221763
0782501000: RNCC: 3 | RNVC: 2
782501: RNCC: 5 | RNVC: 2

30 Jul 1990

4730-12-350-3698
Tube Tee

123503698
EN4182-160816: RNCC: 2 | RNVC: 2

22 Mar 2000

4730-12-331-2229
Hose Tee

123312229
88326001: RNCC: 3 | RNVC: 2
88 326 001: RNCC: 5 | RNVC: 2
88-326-001: RNCC: 5 | RNVC: 2

2 Apr 1993

4730-12-329-6994
Pipeline Flexible Spacer

123296994
NT200/GZ/CS/PN16: RNCC: 3 | RNVC: 2

22 Sep 1992

4730-12-702-6195
Tube Elbow

127026195
VG95211-ML-127026195: RNCC: 2 | RNVC: 2
6486A-14-T-SR: RNCC: 3 | RNVC: 2

6 Apr 1995

4730-12-163-9528
Fluid Passage Bolt

121639528
4507-0-10: RNCC: 3 | RNVC: 2

30 May 1969

4730-12-301-0315
Tube Reducer

123010315
KOR10/6-L/OMDS: RNCC: 3 | RNVC: 2
KOR10-6-LOMDS: RNCC: 5 | RNVC: 2
TK-BA35-4730-346: RNCC: 5 | RNVC: 2

19 Sep 1984

4730-12-159-4356
Lubricating Oil Cup

121594356
C1R1-8INDIN3410ST: RNCC: 2 | RNVC: 2
DIN3410-C1R1/8-ST: RNCC: 2 | RNVC: 2

30 May 1969

4730-12-392-8384
Tube Elbow

123928384
81981836210: RNCC: 3 | RNVC: 2
81.98183-6210: RNCC: 5 | RNVC: 2

16 Jul 2013

4730-12-359-8521
Tube Coupling Nut

123598521
240010600: RNCC: 3 | RNVC: 2

14 Mar 2003

4730-12-347-1267
Tube Reducer

123471267
52.3108.897.05: RNCC: 3 | RNVC: 2

30 Oct 1998

4730-12-338-4990
Fluid Pressure Line Multiple Connector

123384990
893 350 081 4: RNCC: 3 | RNVC: 2

19 Jul 1995

4730-12-339-8954
Sediment Strainer Element

123398954
2204.117/50: RNCC: 3 | RNVC: 2

30 Jan 1996

4730-12-309-3097
S Kupplungshaelfte

4730-12-135-1717
Pipe Union

121351717
2INU1DIN2950VERZINKT: RNCC: 2 | RNVC: 2
DIN2950-330-2V: RNCC: 2 | RNVC: 2

30 May 1969

4730-12-317-3858
Pipe Flange

123173858
4900064-41223: RNCC: 3 | RNVC: 2

4 Apr 1989

4730-12-195-1979
Tube Cross

121951979
VG95211-ML-121951979: RNCC: 2 | RNVC: 2
1823391060: RNCC: 3 | RNVC: 2
1823391060: RNCC: 5 | RNVC: 9

25 Jan 1983

4730-12-380-5141
Pipeline Flexible Spacer

123805141
0265-080-386-465-212: RNCC: 3 | RNVC: 2
VG95964-0265-080-386-465-212: RNCC: 5 | RNVC: 2

4 Nov 2009

4730-12-367-3257
Adapter And Flange Assembly

123673257
300.86.46: RNCC: 3 | RNVC: 2

4 Aug 2005

4730-12-386-7586
Pipe Tee

123867586
623.315.00.5: RNCC: 3 | RNVC: 2
74613687: RNCC: 5 | RNVC: 2
2500601915: RNCC: 5 | RNVC: 2

28 Sep 2011

4730-12-352-6350
Tube To Boss Straight Adapter

123526350
1240 0777: RNCC: 3 | RNVC: 2

1 Dec 2000

4730-12-344-1604
Hose To Boss Straight Adapter

4730-12-344-7130
Fluid Pressure Line Multiple Connector

123447130
5501870838: RNCC: 3 | RNVC: 2
5501870838: RNCC: 5 | RNVC: 2
5501870838: RNCC: 5 | RNVC: 2

2 Dec 1997

4730-12-359-6948
Hose Clamp

123596948
05036900: RNCC: 3 | RNVC: 2
05722090: RNCC: 5 | RNVC: 2

26 Feb 2003

4730-12-321-4127
Sediment Strainer Element

123214127
4.05246.02: RNCC: 3 | RNVC: 9
81.12101.6014: RNCC: 5 | RNVC: 2
81121016014: RNCC: 5 | RNVC: 2
40524602: RNCC: 5 | RNVC: 9

16 May 1990

4730-12-094-1721

4730-12-359-6137
Pipe Flange

123596137
8830940445: RNCC: 3 | RNVC: 2

20 Feb 2003

4730-12-370-1367
Hose Clamp

123701367
538130150: RNCC: 3 | RNVC: 2
0538130150: RNCC: 5 | RNVC: 2

25 Sep 2006

4730-12-411-2049

4730-12-702-4089
Tube Union

127024089
VG95211-ML-127024089: RNCC: 2 | RNVC: 2
5.12.6105.1204.98: RNCC: 3 | RNVC: 2

6 Apr 1995

4730-12-373-0763
Hose Clamp

123730763
DIN3017-A-40-60X9-C6-W4: RNCC: 2 | RNVC: 2

24 Sep 2007

4730-12-373-6161
Tube Coupling Nut

123736161
ISO8434-1-N-L12-ST-A3P: RNCC: 2 | RNVC: 2

21 Nov 2007

4730-12-329-4585
Tube Nipple

123294585
DIN2353-EL18-ST-A3P: RNCC: 2 | RNVC: 2
P-GV 18 L: RNCC: 3 | RNVC: 2
G18-PL-A3P: RNCC: 3 | RNVC: 2

21 Aug 1992

4730-12-325-1112
Tube To Boss Straight Adapter

123251112
GG106-NP12-08: RNCC: 3 | RNVC: 2

3 May 1991

4730-12-382-9173
Tube To Boss Straight Adapter

123829173
5203014252: RNCC: 3 | RNVC: 2
81981816408: RNCC: 5 | RNVC: 2
81.98181-6408: RNCC: 5 | RNVC: 2
81981816408: RNCC: 5 | RNVC: 2
81.98181-6408: RNCC: 5 | RNVC: 9

24 Aug 2010

4730-12-333-1504
Pr Anschluszstueck

123331504
2102-44-06.00: RNCC: 3 | RNVC: 2

4 Nov 1993

4730-12-310-9191
Flange To Tube Elbow

123109191
P-WFV 30 S-55: RNCC: 3 | RNVC: 2
1545719006: RNCC: 3 | RNVC: 2
BFW30-PS/LK55: RNCC: 3 | RNVC: 2
024974: RNCC: 5 | RNVC: 2

9 Jul 1987

4730-12-186-1496
Hose Clamp

121861496
VG95930SA113X20-W1: RNCC: 2 | RNVC: 2
DIN3017-B1-113X20-W1-1: RNCC: 2 | RNVC: 2
S113/20SKZ: RNCC: 3 | RNVC: 2
S113-20WN8505ST: RNCC: 5 | RNVC: 2
0117 6823: RNCC: 5 | RNVC: 2
S113-20SKZ: RNCC: 5 | RNVC: 2
S113-20WN8505ST: RNCC: 5 | RNVC: 9
0117 6823: RNCC: 5 | RNVC: 9
S113-20WN8505ST: RNCC: 5 | RNVC: 9

2 Dec 1980

4730-12-193-1451
Pipe Plug

121931451
DIN906-R3/8-8.8: RNCC: 2 | RNVC: 2
R3/8DIN906-8.8: RNCC: 2 | RNVC: 2

24 Jun 1982

4730-12-312-5560
Pr Anschluszstueck

123125560
2104-15-08.00: RNCC: 3 | RNVC: 2
SMK 10-8 VS: RNCC: 3 | RNVC: 2
32-104-08: RNCC: 5 | RNVC: 2
SMK 10-8 VS: RNCC: 5 | RNVC: 2
2104-15-08.10: RNCC: 5 | RNVC: 9

18 Jan 1988

4730-12-309-5603
Quick Disconnect Coupling Half

123095603
LP-012-0-S1624-11-2-VH: RNCC: 3 | RNVC: 2
LP012-0S1624-11-2-00-Z36: RNCC: 5 | RNVC: 2
909614040: RNCC: 5 | RNVC: 2

4 Feb 1987

4730-12-338-4030
Tube Tee

123384030
TS12/12/10L-SW17-1.4571: RNCC: 3 | RNVC: 2
XTR12/10/12-L/71: RNCC: 3 | RNVC: 2
2300002-122400.050: RNCC: 5 | RNVC: 2
2300002-122400.050: RNCC: 5 | RNVC: 9
TR-S10/12/12L-1.4571: RNCC: 5 | RNVC: 9
2300002-122400.050: RNCC: 5 | RNVC: 9
9903129: RNCC: 5 | RNVC: 9

4 Jul 1995

4730-12-144-4273
Tube Cross

121444273
XK15FISA3: RNCC: 3 | RNVC: 2
4A57793: RNCC: 5 | RNVC: 2
03423605: RNCC: 5 | RNVC: 2
3423605EE5091-28: RNCC: 5 | RNVC: 2
5157-28-12.47: RNCC: 5 | RNVC: 2
8935500404: RNCC: 5 | RNVC: 2
169617705: RNCC: 5 | RNVC: 2
7101-40-99-47: RNCC: 5 | RNVC: 9
7101-40-99.47: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-391-1506
Pipe To Tube Straight Adapter

123911506
JN0610-16: RNCC: 3 | RNVC: 2

21 Feb 2013

4730-12-322-3222
Quick Disconnect Coupling Half

123223222
7171-1032-340420: RNCC: 3 | RNVC: 2
1558455: RNCC: 5 | RNVC: 2
1558455: RNCC: 5 | RNVC: 2

10 Aug 1990

4730-12-361-1866
Fluid Pressure Line Multiple Connector

123611866
51981010072: RNCC: 3 | RNVC: 2
51.98101-0072: RNCC: 5 | RNVC: 2

2 Sep 2003

4730-12-362-9080
Tube Fitting Clinch Sleeve

123629080
0019901667: RNCC: 3 | RNVC: 2
PSR06LX: RNCC: 3 | RNVC: 2
426294: RNCC: 5 | RNVC: 2
5010596367: RNCC: 5 | RNVC: 2
PSR06LX: RNCC: 5 | RNVC: 2
PSR06LX: RNCC: 5 | RNVC: 9

14 Apr 2004

4730-12-374-0188
Tube To Boss Straight Adapter

123740188
8938212340: RNCC: 3 | RNVC: 2

10 Jan 2008

4730-12-356-7325
Quick Disconnect Coupling Half

123567325
LP-006-2-SL009-22-4-ES-F: RNCC: 3 | RNVC: 2

27 Mar 2002

4730-12-342-8521
Pipe Flange

123428521
DIN2576-B50X57-RST37-2: RNCC: 2 | RNVC: 2

9 Apr 1997

4730-12-326-6598
Tube Tee

123266598
2022.0110: RNCC: 3 | RNVC: 2
KS/RAT/40: RNCC: 5 | RNVC: 2

18 Oct 1991

4730-12-305-3213
Tube Nipple

123053213
G12-LL-A3C: RNCC: 3 | RNVC: 2
G12-LL: RNCC: 5 | RNVC: 2

22 Oct 1985

4730-12-179-6873
Tube To Boss Straight Adapter

121796873
L12M22X1-5MAN200ZNPHR5F: RNCC: 3 | RNVC: 2
06.71250-0604: RNCC: 5 | RNVC: 2
06712500604: RNCC: 5 | RNVC: 2

18 Jul 1979

4730-12-187-8192
Fluid Pressure Line Multiple Connector

121878192
XDSVT12-LM: RNCC: 3 | RNVC: 2
XDSVT12LM: RNCC: 5 | RNVC: 2

13 May 1981

4730-12-166-5649
Tube Reducer

121665649
136I003-01: RNCC: 3 | RNVC: 2
081-03-01: RNCC: 5 | RNVC: 2
081-03-01: RNCC: 5 | RNVC: 9

24 Sep 1976

4730-12-322-4163
Tube To Boss Straight Adapter

123224163
A8515: RNCC: 3 | RNVC: 2
A8515: RNCC: 5 | RNVC: 2

20 Aug 1990

4730-12-383-9221
Hose Clamp

123839221
1559564: RNCC: 3 | RNVC: 2

22 Dec 2010

4730-12-192-7211
Adapter Bushing

121927211
K23576-00: RNCC: 3 | RNVC: 9
KB-23576-944: RNCC: 5 | RNVC: 9

17 May 1982

4730-12-700-9504
Tube Coupling Nut

127009504
VG95211-ML-127009504: RNCC: 2 | RNVC: 2
2704A-10: RNCC: 3 | RNVC: 2
0500823403139: RNCC: 5 | RNVC: 2

6 Feb 1995

4730-12-358-2533
Flange To Tube Straight Adapter

123582533
J28220110-403: RNCC: 3 | RNVC: 2

2 Oct 2002

4730-12-356-2750
Tube Cap

123562750
ROV16-PS-A3C: RNCC: 3 | RNVC: 2
909618508: RNCC: 3 | RNVC: 2

7 Feb 2002

4730-12-322-0760
Tube Reducer

123220760
NR5243-18A10: RNCC: 3 | RNVC: 2

20 Jul 1990

4730-12-328-6155
Tube To Boss Straight Adapter

123286155
41-1180-3700.000.0: RNCC: 2 | RNVC: 2
0039K(4): RNCC: 3 | RNVC: 2
41-1180-3700.000.0: RNCC: 3 | RNVC: 2
4730123286155: RNCC: 5 | RNVC: 2

6 Jun 1992

4730-12-154-1425
Tube Nipple

121541425
DIN3932-S30-1.4571: RNCC: 2 | RNVC: 2
XG30-S-ST0SZ/71: RNCC: 3 | RNVC: 2
812906: RNCC: 3 | RNVC: 2
XG30SST0SZ1-4571: RNCC: 5 | RNVC: 2
S30DIN3932-1-4571: RNCC: 5 | RNVC: 2
XG30SST0SZ1.4571: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-320-6563
Pipe To Tube Straight Adapter

123206563
S-GEV12L/1/4NPT: RNCC: 3 | RNVC: 2
GE12-PL/1 4NPT-A3P: RNCC: 3 | RNVC: 2

5 Feb 1990

4730-12-158-6186
Pipe To Tube Straight Adapter

121586186
D12S3-8INNPT: RNCC: 3 | RNVC: 2
15-01S12NPT: RNCC: 3 | RNVC: 2
GE12NPT3-8S: RNCC: 3 | RNVC: 2
P-GEV 12 S/3/8NPT: RNCC: 3 | RNVC: 2
GE12S3-8INNPT: RNCC: 3 | RNVC: 2
106651: RNCC: 3 | RNVC: 2
SGEV12S3-8INNPT: RNCC: 5 | RNVC: 2
GE12S3/8INNPT: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-300-1555
Quick Disconnect Coupling Half

123001555
843885: RNCC: 3 | RNVC: 2
0661790: RNCC: 5 | RNVC: 2
42071109: RNCC: 5 | RNVC: 2
81981810059: RNCC: 5 | RNVC: 2
DF661790: RNCC: 5 | RNVC: 2
661790: RNCC: 5 | RNVC: 9
81.98181-0059: RNCC: 5 | RNVC: 9

7 Jul 1984

4730-12-337-1490
Hose Clamp

123371490
T9234-15-24MM: RNCC: 3 | RNVC: 2

25 Jan 1995

4730-12-701-8628
Tube Tee

127018628
VG95211-ML-127018628: RNCC: 2 | RNVC: 2
6061A-10-14: RNCC: 3 | RNVC: 2

6 Feb 1995

4730-12-358-8479
Pipe Flange

123588479
24.18.22: RNCC: 3 | RNVC: 2
24-18-22: RNCC: 5 | RNVC: 2

21 Nov 2002

4730-12-387-8685
Sediment Strainer Element

123878685
51125030084: RNCC: 3 | RNVC: 2
51.12503-0084: RNCC: 5 | RNVC: 2

6 Feb 2012

4730-12-168-6751
Tube To Boss Straight Adapter

121686751
DS12DIN3930STB3A: RNCC: 2 | RNVC: 2
GE12SRST0SZB3A: RNCC: 3 | RNVC: 2
GE12SRST0SZKADM: RNCC: 3 | RNVC: 2
DIN3930-DS12-ST-B3A: RNCC: 5 | RNVC: 2

28 Mar 1977

4730-12-127-5257
Fluid Pressure Line Multiple Connector

121275257
DIN7622-B8: RNCC: 2 | RNVC: 2
N15010-B8S: RNCC: 5 | RNVC: 2
N15010-B8S: RNCC: 5 | RNVC: 2
01119220: RNCC: 5 | RNVC: 2
120227: RNCC: 5 | RNVC: 2
B8DIN7622FLUSZSTAHL: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-189-7638
Tube Coupling Inverted Nut

121897638
A18VG85044: RNCC: 2 | RNVC: 2
VG85044/A22-300: RNCC: 3 | RNVC: 2
316-203001-80: RNCC: 5 | RNVC: 2
S03316-203001-80: RNCC: 5 | RNVC: 2
S03316-203001-80: RNCC: 5 | RNVC: 9
103700090501000VGT7CUSN6: RNCC: 5 | RNVC: 9

21 Oct 1981

4730-12-185-2179
Tube Reducer

121852179
NO PRIMARY REF 12-185-2179: RNCC: 3 | RNVC: 2
13-2-7461-7: RNCC: 5 | RNVC: 9

20 Sep 1980

4730-12-308-1159
Tube Nipple

123081159
DIN2353-RS30-ST-A3P: RNCC: 2 | RNVC: 2
R30S1106023-F: RNCC: 3 | RNVC: 2
K30-S/A3P: RNCC: 3 | RNVC: 2
4702805: RNCC: 3 | RNVC: 2
GS30S-A3P: RNCC: 3 | RNVC: 2
P-GSV 30 S: RNCC: 3 | RNVC: 2
137902: RNCC: 3 | RNVC: 2
SV30-PS-A3P: RNCC: 3 | RNVC: 2
S-GSV30S-A3P: RNCC: 5 | RNVC: 2
0304997: RNCC: 5 | RNVC: 2

3 Sep 1986

4730-12-361-5505
Tube To Hose Straight Adapter

123615505
2997779: RNCC: 3 | RNVC: 2
1511-5/3-M5: RNCC: 3 | RNVC: 2
3273: RNCC: 5 | RNVC: 2

16 Oct 2003

4730-12-300-8996
Tube To Boss Straight Adapter

123008996
F8BX-S25-M33X2: RNCC: 3 | RNVC: 2

11 Sep 1984

4730-12-180-8177
Quick Disconnect Coupling Half

121808177
84053-07: RNCC: 3 | RNVC: 2

4 Oct 1979

4730-12-336-2720
Pipe Plug

123362720
7780 340 117: RNCC: 3 | RNVC: 2
7780340117: RNCC: 5 | RNVC: 2

4 Nov 1994

4730-12-367-9769
Hose Nipple

123679769
203 654: RNCC: 3 | RNVC: 2

14 Nov 2005

4730-12-365-4783
Quick Disconnect Coupling Half

123654783
0049904571: RNCC: 3 | RNVC: 2
0231565000: RNCC: 3 | RNVC: 2

7 Jan 2005

4730-12-368-6645
Tube Reducer

123686645
R900173673: RNCC: 3 | RNVC: 2

5 Apr 2006

4730-12-042-1212

4730-12-324-9316
Tube To Boss Elbow

123249316
852033: RNCC: 3 | RNVC: 2
6.997.375.045: RNCC: 5 | RNVC: 2

11 Apr 1991

4730-12-358-4533
Flange To Tube Elbow

123584533
J28220100-403: RNCC: 3 | RNVC: 2

18 Oct 2002

4730-12-381-2144
Quick Disconnect Coupling Half

123812144
SP-012-0-SL019-32-2: RNCC: 3 | RNVC: 2

21 Jan 2010

4730-12-321-7457
Tube To Boss Straight Adapter

123217457
42008809: RNCC: 3 | RNVC: 2
42008809E5091-28: RNCC: 5 | RNVC: 2

21 Jun 1990

4730-12-385-3626
Tube Seal Bonnet

123853626
50MTN5189-11SMN30-ZNPHR5F: RNCC: 3 | RNVC: 2
735189050000: RNCC: 5 | RNVC: 2

26 May 2011

4730-12-357-8444
Hose Clamp

123578444
EXTRA95-118/16C8W4: RNCC: 3 | RNVC: 2

1 Aug 2002

4730-12-150-5414
Hose Saddle

121505414
1-6-150VG85500: RNCC: 2 | RNVC: 2
R30-7B: RNCC: 3 | RNVC: 2

30 May 1969

4730-12-195-0414
Hydraulic Swivel Joint

121950414
WHO15-PLMOMDVI: RNCC: 3 | RNVC: 2
WHO15-PLM0MDVI: RNCC: 5 | RNVC: 2

5 Jan 1983

4730-12-323-2674
Quick Disconnect Coupling Half

123232674
MD-007-0-WR017-19-2: RNCC: 3 | RNVC: 2

8 Nov 1990

4730-12-309-8450
Tube To Boss Straight Adapter

123098450
AR-LIN169: RNCC: 3 | RNVC: 2
269427: RNCC: 5 | RNVC: 2
4-138429: RNCC: 5 | RNVC: 2

10 Mar 1987

4730-12-166-0528
Fluid Pressure Line Multiple Connector

121660528
10N15009DBL8451.21: RNCC: 3 | RNVC: 2
915009 010001: RNCC: 3 | RNVC: 2
4798-692: RNCC: 5 | RNVC: 2
4798692: RNCC: 5 | RNVC: 2
10N15009DBL8451.21: RNCC: 5 | RNVC: 2
10N15009: RNCC: 5 | RNVC: 9
10N15009: RNCC: 5 | RNVC: 9
A10DIN7621-5.8: RNCC: 5 | RNVC: 9
DIN7621-A10-5.8: RNCC: 5 | RNVC: 9

29 Jul 1976

4730-12-325-0497
Tube Elbow

123250497
XW12-L/71: RNCC: 3 | RNVC: 2
XW12-L-1.4571: RNCC: 5 | RNVC: 2

26 Apr 1991

4730-12-189-6864
Pipe Coupling

121896864
DIN2986-1/8"-1.4571: RNCC: 2 | RNVC: 2
DIN2986-1/8-1-4571: RNCC: 5 | RNVC: 2

12 Oct 1981

4730-12-135-1761
Pipe Coupling

121351761
1 1-2INM2DIN2950VERZINKT: RNCC: 2 | RNVC: 2
DIN2950-270-1 1/2V: RNCC: 2 | RNVC: 2

30 May 1969

4730-12-355-0451
Tube To Boss Straight Adapter

123550451
XGE25-S/1 5/16-12UN/A3P: RNCC: 3 | RNVC: 2

26 Sep 2001

4730-12-300-7055
Tube Reducer

123007055
2146-71-02.02: RNCC: 3 | RNVC: 2

25 Aug 1984

4730-12-312-4483
Tube To Boss Straight Adapter

123124483
8N15013DBL9400.00: RNCC: 3 | RNVC: 2
N15013-8DBL9400.00: RNCC: 5 | RNVC: 2

8 Jan 1988

4730-12-389-3983
Tube To Boss Tee

123893983
NO PRIMARY REF 12-389-3983: RNCC: 3 | RNVC: 2
AVT44: RNCC: 5 | RNVC: 2

2 Jul 2012

4730-12-192-9461
Tube Reducer

121929461
H3122-B10X6: RNCC: 3 | RNVC: 2
0111 9138: RNCC: 5 | RNVC: 2
1119138ES8931-22: RNCC: 5 | RNVC: 2
1119138: RNCC: 5 | RNVC: 9

7 Jun 1982

4730-12-193-8248
Tube Coupling

121938248
GM10011-48: RNCC: 3 | RNVC: 2
GM10011-48: RNCC: 3 | RNVC: 2
99637650007: RNCC: 5 | RNVC: 2

2 Sep 1982

4730-12-383-3619
Tube Tee

123833619
TV-20S-1.4571: RNCC: 3 | RNVC: 2
61111098: RNCC: 3 | RNVC: 2

12 Oct 2010

4730-12-166-7405
Flange To Tube To Hose Tee

121667405
30-79006-5026: RNCC: 3 | RNVC: 2

14 Oct 1976

4730-12-340-0354
Tube To Boss Straight Adapter

123400354
GE30-PS/R1/71: RNCC: 3 | RNVC: 2

16 Feb 1996

4730-12-168-0615
Hose Clamp

121680615
ZWS10-10/9ZY: RNCC: 3 | RNVC: 2
E10-10-9ZYHN15715: RNCC: 5 | RNVC: 2
0116 6481: RNCC: 5 | RNVC: 2
ZWS10X9H735: RNCC: 5 | RNVC: 2
996262036: RNCC: 5 | RNVC: 2
1166481EE8934-61: RNCC: 5 | RNVC: 2
ZWS10-9ZY: RNCC: 5 | RNVC: 2
1166481: RNCC: 5 | RNVC: 9

9 Feb 1977

4730-12-701-8652
Flange To Pipe Tee

127018652
VG95211-ML-127018652: RNCC: 2 | RNVC: 2
6090A-4-6: RNCC: 3 | RNVC: 2

6 Feb 1995

4730-12-175-5008
Gehaeuse

121755008
XDSVW8SRA3P: RNCC: 3 | RNVC: 2
XDSVW8SRB3A: RNCC: 5 | RNVC: 2

25 Sep 1978

4730-12-349-1978
Pipe To Tube Elbow

123491978
3092-1 1/4: RNCC: 3 | RNVC: 2

7 Oct 1999

4730-12-326-8880
Straight Tubing Connector

123268880
59530-635: RNCC: 3 | RNVC: 2

6 Nov 1991

4730-12-333-3948
Tube Tee

123333948
P-TV 25 S: RNCC: 3 | RNVC: 2
T25-PS-A3P: RNCC: 3 | RNVC: 2
DIN2353-QS25-ST-A3P: RNCC: 5 | RNVC: 9

10 Dec 1993

4730-12-316-5881
Tube Elbow

123165881
15/1-270/LL16M22X1,5: RNCC: 3 | RNVC: 2
1640035: RNCC: 5 | RNVC: 2
8411497: RNCC: 5 | RNVC: 2

26 Jan 1989

4730-12-382-3764
Pipe Plug

123823764
42-10-430-6: RNCC: 3 | RNVC: 2
42-10-430.6: RNCC: 5 | RNVC: 2

14 Jun 2010

4730-12-367-3834
Pipeline Flexible Spacer

123673834
90134A3E-19/REP.5: RNCC: 3 | RNVC: 2

12 Aug 2005

4730-12-381-7431
Tube Reducer

123817431
RED22/15LOMDCF: RNCC: 3 | RNVC: 2
RED22/15LOMDCF: RNCC: 3 | RNVC: 2
A231004000188: RNCC: 5 | RNVC: 2
40005376: RNCC: 5 | RNVC: 2

25 Mar 2010

4730-12-324-0534
Hose To Boss Straight Adapter

123240534
4900217-016.01: RNCC: 3 | RNVC: 2

17 Jan 1991

4730-12-700-9562
Tube Union

127009562
VG95211-ML-127009562: RNCC: 2 | RNVC: 2
2716A-20: RNCC: 3 | RNVC: 2
0500824004009: RNCC: 5 | RNVC: 2

6 Feb 1995

4730-12-318-4528
Pipe To Tube Straight Adapter

123184528
GE8LLM-1.4571: RNCC: 3 | RNVC: 2

17 Jul 1989

4730-12-320-0526
Pipe Nipple

123200526
G2083-6-6S: RNCC: 3 | RNVC: 2

1 Dec 1989

4730-12-356-0693
Blind Pipe Flange

123560693
W15176: RNCC: 3 | RNVC: 2
19292: RNCC: 3 | RNVC: 2
15176: RNCC: 5 | RNVC: 2
623.15176-4A: RNCC: 5 | RNVC: 2
15176: RNCC: 5 | RNVC: 2

18 Jan 2002

4730-12-702-0510
Flange To Pipe Tee

127020510
VG95211-ML-127020510: RNCC: 2 | RNVC: 2
2762A-8: RNCC: 3 | RNVC: 2

6 Apr 1995

4730-12-321-7371
Lubrication Fitting

123217371
DIN71412-AS8X1: RNCC: 2 | RNVC: 2
2171710001: RNCC: 3 | RNVC: 2
SK2521-04: RNCC: 5 | RNVC: 2
06380702102: RNCC: 5 | RNVC: 2
2490562: RNCC: 5 | RNVC: 2
071412008102: RNCC: 5 | RNVC: 2
5000821610: RNCC: 5 | RNVC: 2
SK2521-04: RNCC: 5 | RNVC: 2
27932002: RNCC: 5 | RNVC: 2

20 Jun 1990

4730-12-381-0316
Hose Clamp

123810316
530-060-100: RNCC: 3 | RNVC: 2

29 Dec 2009

4730-12-304-8354
Tube To Boss Straight Adapter

123048354
GE12L/M22X1,5/SA63: RNCC: 3 | RNVC: 2
0893634: RNCC: 5 | RNVC: 2
0893634: RNCC: 5 | RNVC: 2

28 Aug 1985

4730-12-357-8205
Tube Elbow

123578205
0039902971: RNCC: 3 | RNVC: 2
0227815000: RNCC: 3 | RNVC: 2

29 Jul 2002

4730-12-166-2356
Quick Disconnect Coupling Half

121662356
0009973189: RNCC: 3 | RNVC: 2
62 6842 208 504: RNCC: 5 | RNVC: 9
626842208504: RNCC: 5 | RNVC: 9
626842208504-0: RNCC: 5 | RNVC: 9

19 Aug 1976

4730-12-195-7652
Pruef Verschraubung

121957652
258635: RNCC: 3 | RNVC: 2
0656778: RNCC: 5 | RNVC: 2
656778: RNCC: 5 | RNVC: 9

13 Apr 1983

4730-12-154-1083
Tube To Boss Straight Adapter

121541083
2360-020000.33.0: RNCC: 2 | RNVC: 2
2360-020000.33.0: RNCC: 3 | RNVC: 2
2360-020000.33.0: RNCC: 5 | RNVC: 2
2360-020000-33-0: RNCC: 5 | RNVC: 2
2360-020000.33.0: RNCC: 5 | RNVC: 2
2360-020000-33-0: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-308-1935
Hydraulic Swivel Joint

123081935
SVH12LR-F: RNCC: 3 | RNVC: 2
SBD12-RL/A3P: RNCC: 3 | RNVC: 2
3301305: RNCC: 3 | RNVC: 2
NS12R3/8L-A3P: RNCC: 3 | RNVC: 2
P-SWV 12 LR: RNCC: 3 | RNVC: 2
SWVE12-PLR-A3P: RNCC: 3 | RNVC: 2
153152: RNCC: 3 | RNVC: 2
S-SWV12LR-A3P: RNCC: 5 | RNVC: 9
SWVE 12-PLR-A3P: RNCC: 5 | RNVC: 9

12 Sep 1986

4730-12-328-9060
Tube Union

123289060
NO PRIMARY REF 12-328-9060: RNCC: 3 | RNVC: 2
02180-2: RNCC: 5 | RNVC: 9

1 Jul 1992

4730-12-194-1697
Tube Tee

121941697
2500136-8006.00: RNCC: 2 | RNVC: 2
XTS12LA4CEP: RNCC: 3 | RNVC: 2
2500136-8006.00: RNCC: 3 | RNVC: 2
IB15/2-220/L12: RNCC: 3 | RNVC: 2
XTSV12-L/A4C-EP: RNCC: 3 | RNVC: 2
307084: RNCC: 5 | RNVC: 2
2500136-8006.00: RNCC: 5 | RNVC: 9
2500136-8006.00: RNCC: 5 | RNVC: 9

7 Oct 1982

4730-12-135-3948
Tube Tee

121353948
DIN2353-QS20-SOMS: RNCC: 2 | RNVC: 2
QS20DIN2353S0MS: RNCC: 2 | RNVC: 2
S-TV 20 S-SOMS59: RNCC: 3 | RNVC: 2
T20-PS-SOMS: RNCC: 3 | RNVC: 2
134805: RNCC: 3 | RNVC: 2
STV20SS0MY: RNCC: 5 | RNVC: 2
T20SS0MS: RNCC: 5 | RNVC: 2
T20PSSOMS: RNCC: 5 | RNVC: 9
T20SS0MS59: RNCC: 5 | RNVC: 9
TS20S0MS59: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-154-1432
Tube-Hose Fitting Compression Sleeve

121541432
DIN3867-AS20-1.4571: RNCC: 2 | RNVC: 2
0DR20S1-4571: RNCC: 3 | RNVC: 2
008806: RNCC: 3 | RNVC: 2
0DR20S1.4571: RNCC: 5 | RNVC: 9
AS20DIN3867: RNCC: 5 | RNVC: 9
AS20DIN3867-1-4571: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-314-8725
Pipe Reducer

123148725
G2081-20-8SS: RNCC: 3 | RNVC: 2

20 Aug 1988

4730-12-176-8308
Hose Clamp

121768308
06671280355: RNCC: 3 | RNVC: 2
06.67128-0355: RNCC: 5 | RNVC: 2
A641-663M7-751-30: RNCC: 5 | RNVC: 2

20 Dec 1978

4730-12-322-7353
Pr Anschluszstueck

123227353
SMK 12-6L-VK: RNCC: 3 | RNVC: 2
SMK 12-6L-VK: RNCC: 5 | RNVC: 2

17 Sep 1990

4730-12-334-1387
Tube Tee

123341387
SO-32411-8-1/4-PVDF: RNCC: 3 | RNVC: 2

24 Mar 1994

4730-12-393-8938
Tube Elbow

123938938
1158382058: RNCC: 3 | RNVC: 2
525196: RNCC: 5 | RNVC: 2

21 Oct 2013

4730-12-700-9556
Tube Union

127009556
VG95211-ML-127009556: RNCC: 2 | RNVC: 2
2714A-6-K: RNCC: 3 | RNVC: 2

6 Feb 1995

4730-12-309-6026
Pipe Reducer

123096026
DIN2990-3/4X3/8MS: RNCC: 2 | RNVC: 2

6 Feb 1987

4730-12-368-0340
Pipeline Flexible Spacer

123680340
0260-125-900-480-VG95964 TEIL3: RNCC: 3 | RNVC: 2
VG95964-0260-125-900-480: RNCC: 5 | RNVC: 9

23 Nov 2005

4730-12-361-3729
Tube To Boss Straight Adapter

123613729
GE12SR1/2A3C: RNCC: 3 | RNVC: 2

19 Sep 2003

4730-12-373-5311
Tube Nipple

123735311
DIN7631-28: RNCC: 2 | RNVC: 2

13 Nov 2007

4730-12-198-0589
Tube Coupling

121980589
PAN4155B63-70: RNCC: 3 | RNVC: 2

15 Dec 1983

4730-12-383-3307
Tube Nipple

123833307
ISO8434-1-SC-S14-1.4571: RNCC: 2 | RNVC: 2
61111198: RNCC: 3 | RNVC: 2

7 Oct 2010

4730-12-136-6184
Pipe Tee

121366184
1-2INB1DIN2950: RNCC: 2 | RNVC: 2
DIN2950-130-1/2: RNCC: 2 | RNVC: 2
0300-67-003-0: RNCC: 5 | RNVC: 2

30 May 1969

4730-12-154-1435
Tube Coupling Nut

121541435
DIN3870-AS8-SOMS59-A3P: RNCC: 2 | RNVC: 2
M8S-SOMS59-A3P: RNCC: 3 | RNVC: 2
M8-S-SOMS-A3P: RNCC: 3 | RNVC: 2
M8SS0MSKADM: RNCC: 5 | RNVC: 2
AS8DIN3870-2-0540-27B2A: RNCC: 5 | RNVC: 2
AS8DIN3870S0MS59F50B2A: RNCC: 5 | RNVC: 2
M8SS0MS59KADM: RNCC: 5 | RNVC: 9
M8SSOMSA3P: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-362-2102
Tube Reducer

123622102
475430808: RNCC: 3 | RNVC: 2
REDSD22/10L: RNCC: 3 | RNVC: 2
065533: RNCC: 5 | RNVC: 2
475430877: RNCC: 5 | RNVC: 9

23 Jan 2004

4730-12-322-5156
Fluid Passage Bolt

123225156
4-153192: RNCC: 3 | RNVC: 2
143885: RNCC: 5 | RNVC: 2

29 Aug 1990

4730-12-376-7244
Pipe Tee

123767244
3130-1/4: RNCC: 3 | RNVC: 2
3130002002002: RNCC: 5 | RNVC: 2

31 Oct 2008

4730-12-143-1819
Tube Tee

121431819
M1AT12-1.4541: RNCC: 3 | RNVC: 2
M1AT12-1-4541: RNCC: 5 | RNVC: 2

30 May 1969

4730-12-176-8974
Tube To Boss Straight Adapter

121768974
7734 030 109: RNCC: 3 | RNVC: 2
81.98130.0323: RNCC: 5 | RNVC: 2
81981300323: RNCC: 5 | RNVC: 2
7734030109: RNCC: 5 | RNVC: 9
7734030109: RNCC: 5 | RNVC: 9

27 Dec 1978

4730-12-368-1892
Tube To Hose Straight Adapter

123681892
VC75-3": RNCC: 3 | RNVC: 2
VC75-3": RNCC: 5 | RNVC: 2

4 Jan 2006

4730-12-350-2228
Pipe Plug

123502228
N/S1-6/502/1: RNCC: 3 | RNVC: 2

29 Feb 2000

4730-12-189-4088
Fluid Pressure Line Multiple Connector

121894088
B13DIN7622C35: RNCC: 2 | RNVC: 2
01119224: RNCC: 5 | RNVC: 2
1119224EY8831-01: RNCC: 5 | RNVC: 2
DIN7622-B13-C35: RNCC: 5 | RNVC: 2

24 Sep 1981

4730-12-155-4289
Tube To Boss Straight Adapter

121554289
160-70161-32: RNCC: 3 | RNVC: 2
160-70161-32: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-379-9233
Hose Clamp

123799233
TORRO23-35/9-C7-W3-WF: RNCC: 3 | RNVC: 2
01270708029: RNCC: 5 | RNVC: 2

14 Sep 2009

4730-12-346-5806
Union Tailpiece

123465806
6-668-0733: RNCC: 3 | RNVC: 2

12 Aug 1998

4730-12-152-8217
Adapter Bushing

121528217
23307-208000-07-0: RNCC: 2 | RNVC: 2
23307-208000.07.0: RNCC: 2 | RNVC: 2
23307-208000-07-0: RNCC: 5 | RNVC: 2

30 May 1969

4730-12-393-8265
Hydraulic Swivel Joint

123938265
DSVW10LMA3C: RNCC: 3 | RNVC: 2

15 Oct 2013

4730-12-342-8213
Tube-Pipe Fitting Kit

123428213
111 151 0605/2: RNCC: 3 | RNVC: 2

8 Apr 1997

4730-12-357-3573
Pipe Plug

123573573
2313077015: RNCC: 3 | RNVC: 2

12 Jun 2002

4730-12-375-7627
Tube Elbow

123757627
EW22LOMDCF: RNCC: 3 | RNVC: 2
A231004000025: RNCC: 5 | RNVC: 2

2 Jul 2008

4730-12-410-9932

4730-12-411-5851

4730-12-136-6252
Quick Disconnect Coupling Assembly

121366252
4685K: RNCC: 3 | RNVC: 2
10-73-03-09-01: RNCC: 5 | RNVC: 9
NA030901: RNCC: 5 | RNVC: 9
10-73-03-09-01: RNCC: 5 | RNVC: 9
NA0309-01: RNCC: 5 | RNVC: 9
NA030901: RNCC: 5 | RNVC: 9
10-73-03-09-01: RNCC: 5 | RNVC: 9
10-73-03-09P0S1: RNCC: 5 | RNVC: 9
4685K: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-316-1783
Tube To Hose Straight Adapter

123161783
G4411-8S: RNCC: 3 | RNVC: 2

29 Dec 1988

4730-12-361-3919
Tube To Boss Straight Adapter

123613919
51981300384: RNCC: 3 | RNVC: 2
51.98130-0384: RNCC: 5 | RNVC: 2

23 Sep 2003

4730-12-354-8038
Pipe Flange

123548038
J28220220-403: RNCC: 3 | RNVC: 2

28 Aug 2001

4730-12-300-4598
Tube To Boss Straight Adapter

123004598
79-950-1220: RNCC: 3 | RNVC: 2
79-950-1220: RNCC: 5 | RNVC: 2

3 Aug 1984

4730-12-379-2349
Hydraulic Manifold Assembly

123792349
R901062838: RNCC: 3 | RNVC: 2
AGEV1-37417-AA/HM-W2.2: RNCC: 5 | RNVC: 9
R901062838: RNCC: 5 | RNVC: 9

7 Jul 2009

4730-12-343-6848
Tube Reducer

123436848
PAN4108-10-06: RNCC: 3 | RNVC: 2

15 Jul 1997

4730-12-370-4819
Tube To Boss Straight Adapter

123704819
3800-153: RNCC: 3 | RNVC: 2
809-185814: RNCC: 5 | RNVC: 2

13 Nov 2006

4730-12-351-3487
Threaded Tube Fitting Plug

123513487
4PNMTXS: RNCC: 3 | RNVC: 2
4730700035: RNCC: 5 | RNVC: 2

18 Jul 2000

4730-12-346-3121
Quick Disconnect Coupling Half

123463121
CF 842 249 CE: RNCC: 2 | RNVC: 2
CF 842 249 CE: RNCC: 3 | RNVC: 2

9 Jul 1998

4730-12-193-8928
Boss Reducer

121938928
4-109357: RNCC: 3 | RNVC: 2

13 Sep 1982

4730-12-382-4601
Tube To Boss Straight Adapter

123824601
VGE08LR1/2: RNCC: 3 | RNVC: 2

25 Jun 2010

4730-12-148-4826

4730-12-308-0621
Hose To Boss Straight Adapter

123080621
4021.2780.3: RNCC: 3 | RNVC: 2

27 Aug 1986

4730-12-385-0009
Tube Fitting Brazing Ferrule

123850009
3085 310 056: RNCC: 3 | RNVC: 2

18 Apr 2011

4730-12-393-5687
Fluid Flow Restrictor

123935687
11.28918-0131: RNCC: 3 | RNVC: 2
11.28918-0131: RNCC: 5 | RNVC: 2

25 Sep 2013

4730-12-168-4603
Quick Disconnect Coupling Assembly

121684603
490170-33: RNCC: 2 | RNVC: 2

15 Mar 1977

4730-12-199-2605
Tube Seal Bonnet

121992605
16N15005DBL8400.00: RNCC: 3 | RNVC: 2
MBN15005-18-DBL8400.00: RNCC: 5 | RNVC: 2
MBN15005-18-DBL8400.00: RNCC: 5 | RNVC: 2
16N15005: RNCC: 5 | RNVC: 2
16N15005DBL8400.00: RNCC: 5 | RNVC: 2
16N15005: RNCC: 5 | RNVC: 2
DIN7610-16-8S: RNCC: 5 | RNVC: 2

6 Apr 1984

4730-12-310-1931
Flange To Boss Straight Adapter

123101931
E3-2024620: RNCC: 2 | RNVC: 2
E3-2024620: RNCC: 3 | RNVC: 2
E3-2024620: RNCC: 5 | RNVC: 9

16 Apr 1987

4730-12-378-9822
Rapid Action Coupled Pipe Cap

123789822
5558-34-12: RNCC: 3 | RNVC: 2

9 Jun 2009

4730-12-353-1881
Tube Elbow

123531881
EW16-PS-A3P: RNCC: 3 | RNVC: 2

7 Feb 2001

4730-12-393-7456
Quick Disconnect Coupling Half

123937456
NO PRIMARY REF 12-393-7456: RNCC: 3 | RNVC: 2
N10.3-100S: RNCC: 5 | RNVC: 2
N10.3-100S: RNCC: 5 | RNVC: 2

8 Oct 2013

4730-12-367-8787
Hose Clamp

123678787
DIN3017-A-10-16X9-W4: RNCC: 2 | RNVC: 2
0016451: RNCC: 3 | RNVC: 2

27 Oct 2005

4730-12-376-6091
Tube Tee

123766091
EL6-L-OMDK-A3C: RNCC: 3 | RNVC: 2

21 Oct 2008

4730-12-700-3956
Hose Cap

127003956
65-15135373513: RNCC: 2 | RNVC: 2
153.006.004.007: RNCC: 5 | RNVC: 9

24 Apr 1992

4730-12-337-6639
Tube To Boss Straight Adapter

123376639
GE12-PL/3/4-16UNF-A3P: RNCC: 3 | RNVC: 2

23 Mar 1995

4730-12-377-4523
Tube Tee

123774523
88771070156: RNCC: 3 | RNVC: 2
88.77107-0156: RNCC: 5 | RNVC: 2

16 Jan 2009

4730-12-364-1317
Self-Sealing Coupling Half

123641317
73735/15.2: RNCC: 3 | RNVC: 2
74281-2: RNCC: 5 | RNVC: 9

21 Aug 2004

4730-12-702-3558
Pipe To Boss Straight Adapter

127023558
VG95211-ML-127023558: RNCC: 2 | RNVC: 2
4679A-6KD: RNCC: 3 | RNVC: 2

6 Apr 1995

4730-12-176-8120
Tube Tee

121768120
853577: RNCC: 3 | RNVC: 2

20 Dec 1978

4730-12-344-7145
Fluid Pressure Line Multiple Connector

123447145
705122003000: RNCC: 3 | RNVC: 2

2 Dec 1997

4730-12-344-7305
Tube Coupling Swage Ferrule

123447305
5530980653: RNCC: 3 | RNVC: 2
5530980653: RNCC: 5 | RNVC: 2
5530980653: RNCC: 5 | RNVC: 2

3 Dec 1997

4730-12-189-0497
Tube Nipple

121890497
DIN2353-ES16-1.4571: RNCC: 2 | RNVC: 2
ES16DIN2353-1.4571: RNCC: 2 | RNVC: 2
3602513: RNCC: 3 | RNVC: 2
GV-16S: RNCC: 3 | RNVC: 2
S-GV 16 S-1.4571: RNCC: 3 | RNVC: 2
G16-PS1.4571: RNCC: 3 | RNVC: 2
112756: RNCC: 3 | RNVC: 2
S-GV16S-1.4571: RNCC: 5 | RNVC: 2
G16S1.4571: RNCC: 5 | RNVC: 2
27-2306116: RNCC: 5 | RNVC: 2

20 Aug 1981

4730-12-370-5637
Quick Disconnect Coupling Assembly

123705637
4.413-004.0: RNCC: 3 | RNVC: 2

22 Nov 2006

4730-12-304-2718
Tube Elbow

123042718
EWSD 8 S: RNCC: 3 | RNVC: 2
2404186: RNCC: 5 | RNVC: 2
7404186: RNCC: 5 | RNVC: 2
EWSD8S-A3P: RNCC: 5 | RNVC: 2

4 Jul 1985

4730-12-337-3363
Quick Disconnect Coupling Half

123373363
84053/1370: RNCC: 3 | RNVC: 2

16 Feb 1995

4730-12-147-9478
Tube To Boss Elbow

121479478
DIN2353-JL42-ST: RNCC: 2 | RNVC: 2
JL42DIN2353ST: RNCC: 2 | RNVC: 2
P-WEV 42 LR: RNCC: 3 | RNVC: 2
WE42LR: RNCC: 3 | RNVC: 2
116451: RNCC: 3 | RNVC: 2
SWEV42LR: RNCC: 5 | RNVC: 2
38700: RNCC: 5 | RNVC: 2
CL42R: RNCC: 5 | RNVC: 2
WE42LR: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-312-7807
Tube Reducer

123127807
M-LOT-000000-30014-002: RNCC: 3 | RNVC: 2
M-LOT-000000-30014-002: RNCC: 5 | RNVC: 9

4 Feb 1988

4730-12-320-6574
Hose Clamp

123206574
DIN3017-B1-38X20-W5: RNCC: 2 | RNVC: 2
S38/20SZ-W5: RNCC: 3 | RNVC: 2
18212301625: RNCC: 5 | RNVC: 2
VG95930SA38X20-W5: RNCC: 5 | RNVC: 2

5 Feb 1990

4730-12-344-1967
Pr Anschluszstueck

123441967
2102-02-56.00: RNCC: 3 | RNVC: 2

25 Sep 1997

4730-12-146-1676
Fluid Passage Bolt

121461676
A0272: RNCC: 3 | RNVC: 2
23114-99-0931: RNCC: 5 | RNVC: 2
23114-99-0931: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-124-1085
Tube To Boss Straight Adapter

121241085
6N15013: RNCC: 3 | RNVC: 2
915013006000: RNCC: 3 | RNVC: 2
06.78160-0205: RNCC: 5 | RNVC: 2
06781600205: RNCC: 5 | RNVC: 2
4799078: RNCC: 5 | RNVC: 2
A6DIN7627FLUSZSTAHL: RNCC: 5 | RNVC: 9
DIN7627-A6: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-310-7119
Tube Reducer

123107119
5541205: RNCC: 3 | RNVC: 2
RA10/8L/A3P: RNCC: 3 | RNVC: 2
P-REDV 10/8 L-SV: RNCC: 3 | RNVC: 2
RZ10/8L11183603-F: RNCC: 3 | RNVC: 2
148102-78: RNCC: 3 | RNVC: 2
P-REDV10/8L-SV: RNCC: 5 | RNVC: 2
352258907357: RNCC: 5 | RNVC: 2

23 Jun 1987

4730-12-701-8545
Pipe Union

127018545
VG95211-ML-127018545: RNCC: 2 | RNVC: 2
5832A-34-11SR: RNCC: 3 | RNVC: 2

6 Feb 1995

4730-12-384-8716
Lubricating Oil Cup

123848716
DIN3410-C1M16X1,5-ST: RNCC: 2 | RNVC: 2

6 Apr 2011

4730-12-135-3956
Tube Nipple

121353956
DIN2353-ES10-SOMS: RNCC: 2 | RNVC: 2
ES10DIN2353S0MS: RNCC: 2 | RNVC: 2
S-GV 10 S-SOMS59: RNCC: 3 | RNVC: 2
G10-PS-SOMS: RNCC: 3 | RNVC: 2
112605: RNCC: 3 | RNVC: 2
SGV10SS0MS: RNCC: 5 | RNVC: 2
G10SS0MS: RNCC: 5 | RNVC: 2
DS10S0MS59: RNCC: 5 | RNVC: 2
G10PSSOMS: RNCC: 5 | RNVC: 9
G10SS0MS59: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-701-7238
Pipe To Tube Tee

127017238
VG95211-ML-127017238: RNCC: 2 | RNVC: 2
5.12.7601.9020.00: RNCC: 3 | RNVC: 2

6 Feb 1995

4730-12-323-4154
Tube-Pipe Fitting Kit

123234154
M534240-28: RNCC: 3 | RNVC: 9
M534240-28: RNCC: 5 | RNVC: 2

23 Nov 1990

4730-12-310-1544
Hydraulic Swivel Joint

123101544
WHO42-LMOMD: RNCC: 3 | RNVC: 2

13 Apr 1987

4730-12-311-7935
Pipe Plug

123117935
VS-R3/8-WD-1.4571: RNCC: 3 | RNVC: 2
VSTIR3/8-ED-1.4571: RNCC: 3 | RNVC: 2
VSTIR3/8ED-1.4571: RNCC: 5 | RNVC: 2

16 Oct 1987

4730-12-387-4766
Pipe Plug

123874766
DIN910-G1/8A-1.4401: RNCC: 2 | RNVC: 2
1726-1013: RNCC: 5 | RNVC: 2

22 Dec 2011

4730-12-182-1216
Verschluszbutzen

121821216
1683391067: RNCC: 3 | RNVC: 2
81.11109-0019: RNCC: 5 | RNVC: 2
81111090019: RNCC: 5 | RNVC: 2

14 Jan 1980

4730-12-387-0536
Tube To Boss Straight Adapter

123870536
GE-R L10XR3/8"-PN315-A3C: RNCC: 3 | RNVC: 2
0220390-9: RNCC: 5 | RNVC: 2

2 Nov 2011

4730-12-349-2454
Tube-Pipe Fitting Kit

123492454
NO PRIMARY REF 12-349-2454: RNCC: 3 | RNVC: 2
20200-300: RNCC: 5 | RNVC: 9
4710-01036: RNCC: 6 | RNVC: 9

14 Oct 1999

4730-12-338-8590
Inflating Air Chuck

123388590
1088C-NI: RNCC: 3 | RNVC: 2
14.6700: RNCC: 5 | RNVC: 2

31 Aug 1995

4730-12-183-4356
Hose Clamp

121834356
VG95930GS220-240-W2: RNCC: 2 | RNVC: 2
DIN3017-AS220-240C8-W2: RNCC: 2 | RNVC: 2
SGT220-240/13C8-W2: RNCC: 3 | RNVC: 2
DIN3017S220-240C8W2: RNCC: 5 | RNVC: 2
1448030230: RNCC: 5 | RNVC: 2
SGN220-240-14SKZ: RNCC: 5 | RNVC: 2
VG95930GS220-240W1: RNCC: 5 | RNVC: 9

17 Apr 1980

4730-12-353-5332
Tube Elbow

123535332
11230-08089: RNCC: 3 | RNVC: 2

4 Apr 2001

4730-12-361-1253
Threaded Tube Fitting Plug

123611253
EP435-G3/8": RNCC: 3 | RNVC: 2

26 Aug 2003

4730-12-135-9024
Tube To Hose Straight Adapter

121359024
00-101-63-03: RNCC: 3 | RNVC: 2

30 May 1969

4730-12-320-2189
Tube To Boss Straight Adapter

123202189
0069794: RNCC: 3 | RNVC: 2
0069794: RNCC: 5 | RNVC: 2
306-014-16-090: RNCC: 5 | RNVC: 2

19 Dec 1989

4730-12-363-4750
Pipe To Tube Straight Adapter

123634750
JN0291-063: RNCC: 3 | RNVC: 2

18 Jun 2004

4730-12-155-5460
Fluid Passage Bolt

121555460
160-70315-19: RNCC: 3 | RNVC: 2
160-70315-19: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-346-4096
Flange To Tube Elbow

123464096
S-WFV15L-30/3-301013: RNCC: 3 | RNVC: 9
81981126003: RNCC: 5 | RNVC: 2

22 Jul 1998

4730-12-389-9887
Pipeline Flexible Spacer

123899887
0216-032-300-214: RNCC: 3 | RNVC: 2

20 Sep 2012

4730-12-357-1841
Hydraulic Manifold Assembly

123571841
B8582-380-2A: RNCC: 3 | RNVC: 2

16 May 2002

4730-12-359-5622
Tube Elbow

123595622
ISO8434-1-E-L8-ST-A3P: RNCC: 2 | RNVC: 2

18 Feb 2003

4730-12-300-4169
Tube Elbow

123004169
8938906400: RNCC: 3 | RNVC: 2
6-603-0623: RNCC: 5 | RNVC: 2
A080BS2055: RNCC: 6 | RNVC: 9

1 Aug 1984

4730-12-349-1977
Pipe Tee

123491977
3130-1 1/4: RNCC: 3 | RNVC: 2

7 Oct 1999

4730-12-363-3069
Tube Elbow

123633069
8-8-1120: RNCC: 3 | RNVC: 2

25 May 2004

4730-12-329-7520
Hose Bushing

123297520
1120237: RNCC: 3 | RNVC: 2
91640334: RNCC: 5 | RNVC: 2

23 Sep 1992

4730-12-311-5402
Tube To Boss Straight Adapter

123115402
4-27415: RNCC: 3 | RNVC: 2

15 Sep 1987

4730-12-338-5158
Union Nut

123385158
56.0060.066.01: RNCC: 3 | RNVC: 2

20 Jul 1995

4730-12-091-7012

4730-12-372-4360
Hose Clamp

123724360
15400034: RNCC: 3 | RNVC: 2
14,5RER: RNCC: 5 | RNVC: 2
14,5RER: RNCC: 5 | RNVC: 2
15400034: RNCC: 5 | RNVC: 2
15400034: RNCC: 5 | RNVC: 2

17 Jul 2007

4730-12-367-1248
Pipe Plug

123671248
535.4025.22: RNCC: 3 | RNVC: 2

11 Jul 2005

4730-12-380-5135
Pipeline Flexible Spacer

123805135
0265-080-350-212: RNCC: 3 | RNVC: 2
0265-080-350-212-VG95964 TEIL3: RNCC: 5 | RNVC: 2
VG95964-0265-080-350-212: RNCC: 5 | RNVC: 9

4 Nov 2009

4730-12-320-2260
Reducing Tube Coupling Nut

123202260
5802295-123100.01: RNCC: 2 | RNVC: 2
7800591391: RNCC: 3 | RNVC: 2
5802295-123100.01: RNCC: 5 | RNVC: 2
78005 91391: RNCC: 5 | RNVC: 9

20 Dec 1989

4730-12-389-7139
Quick Disconnect Elbow

123897139
0700-700-04E: RNCC: 3 | RNVC: 2
0700-700-04E: RNCC: 5 | RNVC: 2

16 Aug 2012

4730-12-194-4602
Pipe Plug

121944602
DIN906-R1/8-A1: RNCC: 2 | RNVC: 2
R1/8DIN906-A2: RNCC: 2 | RNVC: 2

4 Nov 1982

4730-12-367-3440
Tube Cap

123673440
735028022001: RNCC: 3 | RNVC: 2
M22X1,5MTN5028-CUAL11NI6FE5F73: RNCC: 5 | RNVC: 2
MTN5028-M22X1,5-CUAL11NI6FE5F73: RNCC: 5 | RNVC: 9

8 Aug 2005

4730-12-338-6820
Hose To Boss Straight Adapter

123386820
41.721-12-6: RNCC: 3 | RNVC: 2
41.329-12-6: RNCC: 5 | RNVC: 2
41.721-12-6: RNCC: 5 | RNVC: 2
41.329-12-6: RNCC: 5 | RNVC: 2

15 Aug 1995

4730-12-152-0775
Pipe To Tube Elbow

121520775
DIN2353-GL8-SOMS: RNCC: 2 | RNVC: 2
S-WEV 8 LRK-SOMS59: RNCC: 3 | RNVC: 2
WE8-LR/MS: RNCC: 3 | RNVC: 2
116055: RNCC: 3 | RNVC: 2
SWEV8LRKS0MS: RNCC: 5 | RNVC: 9
5WE8LRMS: RNCC: 5 | RNVC: 9
WE8LRS0MS: RNCC: 5 | RNVC: 9
WE8LRS0MS59: RNCC: 5 | RNVC: 9
GL8DIN2353S0MS: RNCC: 5 | RNVC: 9
CL8RS0MS59: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-137-5838
Pipe Tee

121375838
3-8INB1DIN2950: RNCC: 2 | RNVC: 2
DIN2950-130-3/8: RNCC: 2 | RNVC: 2
TE3-8INB1DIN2954: RNCC: 5 | RNVC: 2

30 May 1969

4730-12-158-5580
Hydraulic Swivel Joint

121585580
DSVK6SM-A3P: RNCC: 3 | RNVC: 2
DS6M12ZS-A3P: RNCC: 3 | RNVC: 2
P-RSWV 6 SM: RNCC: 3 | RNVC: 2
DSVW6-PSM-A3P: RNCC: 3 | RNVC: 2
DSVW6PSMA3P: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-700-8655
Tube Coupling Nut

127008655
VG95211-ML-127008655: RNCC: 2 | RNVC: 2
155N1391-2: RNCC: 3 | RNVC: 2

6 Feb 1995

4730-12-149-5191
Tube Coupling

121495191
NR5270-35: RNCC: 3 | RNVC: 2
N19531: RNCC: 5 | RNVC: 2
35DIN2857: RNCC: 5 | RNVC: 2
DIN2857-35: RNCC: 5 | RNVC: 2

30 May 1969

4730-12-701-8684
Tube Tee

127018684
VG95211-ML-127018684: RNCC: 2 | RNVC: 2
6498A-4-6-6: RNCC: 3 | RNVC: 2

6 Feb 1995

4730-12-358-6070
Pr Anschluszstueck

123586070
2146-70-46.00: RNCC: 3 | RNVC: 2

29 Oct 2002

4730-12-380-7816
Tube Reducer

123807816
P-REDVDN 28/22 L: RNCC: 3 | RNVC: 2
RED28/22-PL: RNCC: 3 | RNVC: 2
20821: RNCC: 5 | RNVC: 2

30 Nov 2009

4730-12-148-3185
Tube-Hose Fitting Compression Sleeve

121483185
AS14DIN3867B3A: RNCC: 2 | RNVC: 2
0DR14S: RNCC: 3 | RNVC: 2
008703: RNCC: 3 | RNVC: 2
AS14DIN3867: RNCC: 5 | RNVC: 2
DIN3867-AS14: RNCC: 5 | RNVC: 2
0DRKLEIN14S: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-376-1848
Verschluszausstattu

123761848
SS-600-SET: RNCC: 3 | RNVC: 2

22 Aug 2008

4730-12-349-2020
Tube Nipple

123492020
G12-LL-OMD: RNCC: 3 | RNVC: 2
N20193: RNCC: 5 | RNVC: 2

7 Oct 1999

4730-12-313-8227
Pipe Plug

123138227
42-10-150.18.00: RNCC: 3 | RNVC: 2

10 May 1988

4730-12-317-2350
Hose Fitting Swaging Socket

123172350
1003-0008-401008: RNCC: 3 | RNVC: 2

20 Mar 1989

4730-12-143-8095
Tube Coupling Nut

121438095
2915131060: RNCC: 3 | RNVC: 2
NMU2269-3X: RNCC: 5 | RNVC: 2
1293313002: RNCC: 5 | RNVC: 2
NMU2269-3X: RNCC: 5 | RNVC: 9
WMU31Z4X: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-355-8172
Pipe Flange

123558172
J28120173-001: RNCC: 3 | RNVC: 2

18 Dec 2001

4730-12-365-4252
Tube Tee

123654252
4638690022: RNCC: 3 | RNVC: 2

3 Jan 2005

4730-12-379-7748
Flange To Tube Elbow

123797748
05548306: RNCC: 3 | RNVC: 2
CV168734: RNCC: 5 | RNVC: 2
05548306: RNCC: 5 | RNVC: 2

1 Sep 2009

4730-12-359-3755
Tube To Boss Straight Adapter

123593755
700419999011: RNCC: 3 | RNVC: 2
16G3/4AMMN419: RNCC: 5 | RNVC: 2
MMN419-16G3/4A: RNCC: 5 | RNVC: 9

29 Jan 2003

4730-12-314-1793
Flange To Tube Straight Adapter

123141793
588.90-211910-008: RNCC: 3 | RNVC: 2
121152: RNCC: 5 | RNVC: 2

15 Jun 1988

4730-12-387-6669
Hose Clamp

123876669
DIN3017-B1-54X15-W5: RNCC: 2 | RNVC: 2

23 Jan 2012

4730-12-198-4570
Hose Clamp

121984570
DIN3017-AL16-25C6-W3: RNCC: 2 | RNVC: 2
SGT16-25/9C6-W3: RNCC: 3 | RNVC: 2
6-483-0631: RNCC: 5 | RNVC: 2
SGT16-25/963: RNCC: 5 | RNVC: 2

31 Jan 1984

4730-12-193-4904
Tube To Hose Straight Adapter

121934904
2300109-970101.004.0: RNCC: 2 | RNVC: 2
2300109-970101.004.0: RNCC: 3 | RNVC: 2
2300109-970101-004-0: RNCC: 3 | RNVC: 2
2300109-970101-004-0: RNCC: 5 | RNVC: 9
2300109-970101-004-0: RNCC: 5 | RNVC: 9

27 Jul 1982

4730-12-123-4079
Tube To Boss Tee

121234079
00009940000: RNCC: 3 | RNVC: 2
81.98120-0011: RNCC: 5 | RNVC: 2
81981200011: RNCC: 5 | RNVC: 2
8751-97-61-03: RNCC: 5 | RNVC: 2
8751-97-61.03: RNCC: 5 | RNVC: 2
10329-3: RNCC: 5 | RNVC: 2

30 May 1969

4730-12-318-8230
Fluid Pressure Line Multiple Connector

123188230
DIN7642-B5-A3P: RNCC: 2 | RNVC: 2
1903385003: RNCC: 3 | RNVC: 2
1 903 385 003: RNCC: 5 | RNVC: 2

18 Aug 1989

4730-12-337-6623
Quick Disconnect Coupling Half

123376623
MD-012-0-L1522-19-1-SI: RNCC: 3 | RNVC: 2
06641390015: RNCC: 5 | RNVC: 2

23 Mar 1995

4730-12-192-9459
Hose Clamp

121929459
S180X20H735: RNCC: 3 | RNVC: 2
0117 0151: RNCC: 5 | RNVC: 2
1170151EY8934-61: RNCC: 5 | RNVC: 2
1170151: RNCC: 5 | RNVC: 9

7 Jun 1982

4730-12-194-3963
Tube To Hose Elbow

121943963
1272-0005-820305: RNCC: 3 | RNVC: 2

28 Oct 1982

4730-12-135-1397
Pipe Cross

121351397
1 1-2INC1DIN2950VERZINKT: RNCC: 2 | RNVC: 2
DIN2950-180-1 1/2V: RNCC: 2 | RNVC: 2
22188: RNCC: 3 | RNVC: 2
22188: RNCC: 3 | RNVC: 2

30 May 1969

4730-12-390-5818
Tube To Boss Straight Adapter

123905818
3231415222: RNCC: 3 | RNVC: 2
3231415222: RNCC: 5 | RNVC: 2
N60.08.00.00-16: RNCC: 5 | RNVC: 2

26 Nov 2012

4730-12-343-6701
Tube Elbow

123436701
PAN4035-22: RNCC: 3 | RNVC: 2

14 Jul 1997

4730-12-328-9657
Pipe Plug

123289657
588.10-300001-011: RNCC: 3 | RNVC: 2

3 Jul 1992

4730-12-311-7125
Hose To Boss Straight Adapter

123117125
07.390-12-12: RNCC: 3 | RNVC: 2

8 Oct 1987

4730-12-333-2091
Quick Disconnect Coupling Assembly

123332091
076-140763-000-0: RNCC: 2 | RNVC: 2
076-140763-000-0: RNCC: 3 | RNVC: 2

10 Nov 1993

4730-12-338-5318
Tube Nipple

123385318
P-ESV 25 S: RNCC: 3 | RNVC: 2
ESV25-PS-A3P: RNCC: 3 | RNVC: 2

24 Jul 1995

4730-12-167-1024
Quick Disconnect Coupling Half

121671024
62 6840 208 502: RNCC: 3 | RNVC: 2
626840208502: RNCC: 5 | RNVC: 2
626840208502-0: RNCC: 5 | RNVC: 2

23 Nov 1976

4730-12-360-4426
Tube To Boss Straight Adapter

123604426
L15-3/4"-16UNF-2A WN0554BL5: RNCC: 3 | RNVC: 2
05540095: RNCC: 3 | RNVC: 2
05540095: RNCC: 5 | RNVC: 2

21 May 2003

4730-12-162-8812
Tube To Hose Straight Adapter

121628812
07-006-4-4: RNCC: 3 | RNVC: 2
7404075: RNCC: 5 | RNVC: 2
1918-121150-052: RNCC: 5 | RNVC: 2
1918-121150-052: RNCC: 5 | RNVC: 2
1918-121150.052: RNCC: 5 | RNVC: 2
07-006-4-4: RNCC: 5 | RNVC: 9
07-006-4-4: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-148-9350
Tube Coupling

121489350
23176-202100.46.0: RNCC: 2 | RNVC: 2
23176-202100.46.0: RNCC: 3 | RNVC: 2
23176-202100-46-0: RNCC: 5 | RNVC: 9
23176-202100.46.0: RNCC: 5 | RNVC: 9
23176-202100-46-0: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-194-6597
Tube Coupling

121946597
SO1221-8-1/4: RNCC: 3 | RNVC: 2
SO1221-8-1/4: RNCC: 3 | RNVC: 2
G30SO1221-8-1-4IN: RNCC: 5 | RNVC: 2
G30SO1221-8-1-4IN: RNCC: 5 | RNVC: 9

25 Nov 1982

4730-12-191-2249
Sediment Strainer

121912249
R1-1-4IN: RNCC: 3 | RNVC: 2
F122/9366/00261: RNCC: 5 | RNVC: 9

19 Jan 1982

4730-12-384-0282
Tube Reducer

123840282
GRKO-12/08L-1.4571: RNCC: 3 | RNVC: 2
536909: RNCC: 3 | RNVC: 2

13 Jan 2011

4730-12-158-0070
Adapter Bushing

121580070
23305-206210.01.0: RNCC: 2 | RNVC: 2
23305-206210.01.0: RNCC: 3 | RNVC: 2
23305-206210-01-0: RNCC: 5 | RNVC: 9
23305-206210.01.0: RNCC: 5 | RNVC: 9
23305-206210-01-0: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-340-2476
Pr Anschluszstueck

123402476
SMK15-10L-PG: RNCC: 3 | RNVC: 2

19 Mar 1996

4730-12-332-9108
Hose Coupling Assembly

123329108
TK-BA15-4730-024: RNCC: 2 | RNVC: 2
TS57-0235: RNCC: 3 | RNVC: 2
TS57-0235: RNCC: 5 | RNVC: 9

5 Oct 1993

4730-12-150-8629
Lubricating Oil Cup

121508629
C1M5DIN3410ST: RNCC: 2 | RNVC: 2
DIN3410-C1M5-ST: RNCC: 2 | RNVC: 2

30 May 1969

4730-12-366-8040
Tube To Boss Straight Adapter

123668040
164282: RNCC: 3 | RNVC: 2
81981300272: RNCC: 3 | RNVC: 2
81.98130-0272: RNCC: 5 | RNVC: 2

9 Jun 2005

4730-12-702-2238
Pipe Union

127022238
VG95211-ML-127022238: RNCC: 2 | RNVC: 2
30.7601.530: RNCC: 3 | RNVC: 2

6 Apr 1995

4730-12-361-2974
Pipe To Tube Straight Adapter

123612974
160290068-G3/4-M33X1,5: RNCC: 3 | RNVC: 2

15 Sep 2003

4730-12-339-1772
Tube Reducer

123391772
RED14/8-PS-A3P: RNCC: 3 | RNVC: 2

23 Oct 1995

4730-12-316-4504
Tube Tee

123164504
853547: RNCC: 3 | RNVC: 2
IB15/2-270/L12M22X1,5: RNCC: 3 | RNVC: 2
2500136-8026.00: RNCC: 5 | RNVC: 9

18 Jan 1989

4730-12-383-3644
Tube To Boss Straight Adapter

123833644
61111768: RNCC: 3 | RNVC: 2
RS-5.4/3.4-WD-1.4571: RNCC: 3 | RNVC: 2

12 Oct 2010

4730-12-306-1267
Fluid Pressure Line Multiple Connector

123061267
1167177: RNCC: 3 | RNVC: 2
1-2934-6-4: RNCC: 5 | RNVC: 2
167177: RNCC: 5 | RNVC: 9

29 Jan 1986

4730-12-307-5553
Tube Reducer

123075553
GBTXS8-1/4: RNCC: 3 | RNVC: 2
GBTX-S8-1/4": RNCC: 5 | RNVC: 2

2 Jul 1986

4730-12-352-1397
Quick Disconnect Plug

123521397
RFM910-BW2.2: RNCC: 3 | RNVC: 2

19 Oct 2000

4730-12-387-9983
Tube Coupling Nut

123879983
915001010001: RNCC: 3 | RNVC: 2

15 Feb 2012

4730-12-323-8353
Tube To Boss Straight Adapter

123238353
2500136-8027.00: RNCC: 2 | RNVC: 2
2500136-8027.00: RNCC: 3 | RNVC: 2
2500136-8027.00: RNCC: 5 | RNVC: 2

21 Dec 1990

4730-12-386-9786
Tube Reducer Body

123869786
24895: RNCC: 3 | RNVC: 2

24 Oct 2011

4730-12-327-2883
Hose To Boss Straight Adapter

123272883
893 120 414 4: RNCC: 3 | RNVC: 2
909616032: RNCC: 3 | RNVC: 2
UF50000096: RNCC: 5 | RNVC: 2
8931204144: RNCC: 5 | RNVC: 2
Y106 203 10: RNCC: 5 | RNVC: 2

7 Jan 1992

4730-12-309-9787
Hose To Boss Straight Adapter

123099787
2300223-204000.03.0: RNCC: 2 | RNVC: 2
2300223-204000.03.0: RNCC: 3 | RNVC: 2

25 Mar 1987

4730-12-145-2041
Tube To Boss Straight Adapter

121452041
GA16M18X1-5SA1KADM: RNCC: 3 | RNVC: 2
GAI16SM18X1-5SA1KADM: RNCC: 3 | RNVC: 2
169617401: RNCC: 5 | RNVC: 2
GAI16SM18X1-5SA1KADMIERT: RNCC: 5 | RNVC: 9
7101-72-75-43: RNCC: 5 | RNVC: 9
7101-72-75.43: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-189-0205
Tube To Boss Straight Adapter

121890205
2300109-820000.010.0: RNCC: 2 | RNVC: 2
2300109-820000.010.0: RNCC: 3 | RNVC: 2
2300109-820000.010.0: RNCC: 3 | RNVC: 2
2300109-820000-010-0: RNCC: 5 | RNVC: 9
2300109-820000-010-0: RNCC: 5 | RNVC: 9
2300109-820000-010-0: RNCC: 5 | RNVC: 9

19 Aug 1981

4730-12-349-7039
Pipe Plug

123497039
EN3269-06: RNCC: 2 | RNVC: 2

27 Dec 1999

4730-12-326-7100
Fluid Flow Restrictor Unit

123267100
5045: RNCC: 3 | RNVC: 2
S24-400: RNCC: 5 | RNVC: 2
TN5045: RNCC: 5 | RNVC: 2

22 Oct 1991

4730-12-191-8001
Tube Reducer

121918001
ST3800063-600: RNCC: 2 | RNVC: 2
ST3800063-600: RNCC: 5 | RNVC: 2
RNK 150/VK80: RNCC: 5 | RNVC: 9
ST3800063-600: RNCC: 5 | RNVC: 9

5 Mar 1982

4730-12-361-2199
Pipe To Boss Straight Adapter

123612199
10-00 000.07: RNCC: 3 | RNVC: 2

4 Sep 2003

4730-12-171-3899
Tube To Boss Elbow

121713899
06717510255: RNCC: 3 | RNVC: 2
06.71751-0255: RNCC: 5 | RNVC: 2
L8M14X1-5M7-831-10ML001: RNCC: 5 | RNVC: 2
M7.831-10-L8M14X1,5-MAN272: RNCC: 5 | RNVC: 2

7 Oct 1977

4730-12-305-3660
Tube To Boss Straight Adapter

123053660
1000173-382162.000.0: RNCC: 2 | RNVC: 2
85023-00.62.00.0: RNCC: 3 | RNVC: 2
GE10L7/16-20UNF3A/SA339/A3K-OMD: RNCC: 3 | RNVC: 2
85023-00.62.00.0: RNCC: 5 | RNVC: 9

28 Oct 1985

4730-12-382-1934
Hose Clamp

123821934
TORRO12-22/9-W1: RNCC: 3 | RNVC: 2
50VAX03290006: RNCC: 5 | RNVC: 2

20 May 2010

4730-12-367-3832
Pipeline Flexible Spacer

123673832
90134A1E-33/REP.6: RNCC: 3 | RNVC: 2

12 Aug 2005

4730-12-393-7597
Tube To Boss Straight Adapter

123937597
0710102000: RNCC: 3 | RNVC: 2
525067: RNCC: 5 | RNVC: 2

9 Oct 2013

4730-12-407-7938

4730-12-409-0623

4730-12-405-0347

4730-12-332-3633
Sediment Strainer Element

123323633
2457434009: RNCC: 3 | RNVC: 2
51125017123: RNCC: 5 | RNVC: 2
51.12501-7123: RNCC: 5 | RNVC: 2

3 Aug 1993

4730-12-700-9506
Tube Coupling Nut

127009506
VG95211-ML-127009506: RNCC: 2 | RNVC: 2
2704A-16: RNCC: 3 | RNVC: 2
0500823412289: RNCC: 5 | RNVC: 2

6 Feb 1995

4730-12-370-4750
Tube Coupling Nut

123704750
4-68445: RNCC: 3 | RNVC: 2

13 Nov 2006

4730-12-305-3218
Tube Elbow

123053218
DIN2353-KLL8-ST-A3P: RNCC: 2 | RNVC: 2
K8LL1104004-A3P: RNCC: 3 | RNVC: 2
3620405: RNCC: 3 | RNVC: 2
S-WV 8 LL: RNCC: 3 | RNVC: 2
W8-LL-A3P: RNCC: 3 | RNVC: 2
119152: RNCC: 3 | RNVC: 2
S-WV8LL-A3P: RNCC: 5 | RNVC: 2

22 Oct 1985

4730-12-336-4151
Tube To Hose Straight Adapter

123364151
6100146-105000.008.0: RNCC: 2 | RNVC: 2
6100146-105000.008.0: RNCC: 3 | RNVC: 2
6100146-105000.008.0: RNCC: 5 | RNVC: 2

14 Nov 1994

4730-12-148-3166
Tube Tee

121483166
TR20/12/20-S/STOSZ/STL2: RNCC: 3 | RNVC: 2
TR20-12-20SST0SZSTL2: RNCC: 5 | RNVC: 2
TR201220SSTOSZSTL2: RNCC: 5 | RNVC: 9

30 May 1969

4730-12-371-4591
Pr Anschluszstueck

123714591
EG 0104.409-BS 1.4571: RNCC: 3 | RNVC: 2
006402523: RNCC: 5 | RNVC: 2

2 Apr 2007

4730-12-375-3239
Tube Tee

123753239
ISO8434-1-TC-L18-ST-A3P: RNCC: 2 | RNVC: 2

20 May 2008

4730-12-375-1538
Quick Disconnect Coupling Half

123751538
VR-S60-0001.04: RNCC: 3 | RNVC: 2

28 Apr 2008

4730-12-308-7719
Fluid Pressure Line Multiple Connector

123087719
NO PRIMARY REF 12-308-7719: RNCC: 3 | RNVC: 2
186651: RNCC: 5 | RNVC: 9
B213-250-22-1: RNCC: 5 | RNVC: 9

14 Nov 1986

4730-12-367-2779
Quick Disconnect Coupling Half

123672779
76KBIW33MPXS: RNCC: 3 | RNVC: 2
DHS-16160BP: RNCC: 5 | RNVC: 2

27 Jul 2005

4730-12-139-8854
Fluid Passage Bolt

121398854
2443456014: RNCC: 3 | RNVC: 2
2443456011: RNCC: 5 | RNVC: 2
2443456011: RNCC: 5 | RNVC: 2
FPSR2G1Z: RNCC: 5 | RNVC: 2
FPSR2G1Z: RNCC: 5 | RNVC: 2
51.98150-0050: RNCC: 5 | RNVC: 2
000-903-10-18: RNCC: 5 | RNVC: 2
51981500050: RNCC: 5 | RNVC: 2

30 May 1969

4730-12-357-5469
Union Nut

123575469
04-013-120-0045-00-1: RNCC: 3 | RNVC: 2

1 Jul 2002

4730-12-360-1986
Tube To Boss Straight Adapter

123601986
5559977372: RNCC: 3 | RNVC: 2

16 Apr 2003

4730-12-388-3956
Pipe Flange

123883956
AFS 110 GU: RNCC: 3 | RNVC: 2

19 Mar 2012

4730-12-377-2149
Pipe Cap

123772149
A8-X00004798MTN5233: RNCC: 3 | RNVC: 2
735233000184: RNCC: 5 | RNVC: 2

17 Dec 2008

4730-12-377-4193
Fluid Pressure Line Multiple Connector

123774193
41285223: RNCC: 3 | RNVC: 2

15 Jan 2009

4730-12-376-8122
Tube To Boss Straight Adapter

123768122
1135260: RNCC: 3 | RNVC: 2
R900208597: RNCC: 5 | RNVC: 2

10 Nov 2008

4730-12-376-2315
Fluid Passage Bolt

123762315
000000004748: RNCC: 3 | RNVC: 2
000000004748: RNCC: 5 | RNVC: 2

29 Aug 2008

4730-12-385-4966
Hose Clamp

123854966
DIN3017-A-80-100X13-W5-2: RNCC: 2 | RNVC: 2

9 Jun 2011

4730-12-361-1829
Tube To Hose Straight Adapter

123611829
50981312031: RNCC: 3 | RNVC: 2
50.98131-2031: RNCC: 5 | RNVC: 2

2 Sep 2003

4730-12-308-1156
Tube Nipple

123081156
DIN2353-RS16-ST-A3P: RNCC: 2 | RNVC: 2
R16S1106020-F: RNCC: 3 | RNVC: 2
K16-S/A3P: RNCC: 3 | RNVC: 2
4702505: RNCC: 3 | RNVC: 2
GS16S-A3P: RNCC: 3 | RNVC: 2
P-GSV 16 S: RNCC: 3 | RNVC: 2
SV16-PS-A3P: RNCC: 3 | RNVC: 2
137752: RNCC: 3 | RNVC: 2
S-GSV16S-A3P: RNCC: 5 | RNVC: 2

3 Sep 1986

4730-12-379-4172
Tube To Boss Straight Adapter

123794172
ISO8434-1-SDS-L10XG1/4A-B-1.4571: RNCC: 2 | RNVC: 2

21 Jul 2009

Load More Results