4730-12-364-0754
Tube Elbow
4730123640754 123640754 W01937 12174 01937
A fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. View more Tube Elbow
Managed by Germany
NSN Created on 18 Aug 2004
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 4730-12-364-0754
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 4730-12-364-0754 5+ Documents (More...)
| RNVC: 2 | DAC: 3 10 Oct 2013 4730-12-376-5319 https//www.nsnlookup.com /fsg-47/fsc-4730/de 4730-12-364-0754
Tube Elbow 4730123640754 123640754,W01937 https//www.nsnlookup.com /cage Em-Technik Gmbh Armaturenbau
Tube Elbow 4730123640754 123640754,W01937 https//www.nsnlookup.com /cage Em-Technik Gmbh Armaturenbau
DAC: 3 10 Oct 2013 4730-12-376-5319 Tube Elbow 1A0200.31RNCC: 3 | RNVC: 2 | DAC: 1 14 Oct 2008 4730-12-364-0754
RNVC: 2 | DAC: 3 18 Jan 2002 5331-12-334-3724 O-Ring 11060RNCC: 5 | RNVC: 2 | DAC: 3 2 May 1994 4730-12-364-0754
5365-12-174-3220 5365121743220 121743220 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
https//www.nsnlookup.com
/fsg-30/fsc-3040/us
/fsg-30/fsc-3040/us
3040-00-448-0695 Straight Shaft 3040004480695 004480695
-8 220-12174-3 220-12174-1 220-12174-5 220-12174-7 A grouping of two or Subscribe to View -9 220-12174
to View -9 220-12174-8 220-12174-3 220-12174-1 220-12174-5 220 https//www.nsnlookup.com /fsg-25/fsc-
Subscribe to View -9 220-12174-8 220-12174-3 220-12174-1 220-12174-5 220-12174-7 A grouping of two or
to View -9 220-12174-8 220-12174-3 220-12174-1 220-12174-5 220 https//www.nsnlookup.com /fsg-25/fsc-
Subscribe to View -9 220-12174-8 220-12174-3 220-12174-1 220-12174-5 220-12174-7 A grouping of two or
Restrictions 4730-12-364-0754
End Users 4730-12-364-0754
- Spain (YB)
- United Kingdom (ZK)
- Greece (ZU)
Approved Sources 4730-12-364-0754
- Part Number
- Manufacturer
- Status
- W01937
- Manufacturer
- C5207 - Em-Technik Gmbh Armaturenbau (Active)
- Primary Buy
- Primary Buy
- W01937
- C3265 - Pall Wassertechnik Gmbh (Replaced)
- Secondary Buy
- Secondary Buy
- 12174
- C9308 - Rochem Water Treatment Gmbh (Active)
- Secondary Buy
- Secondary Buy
- 01937
- C3265 - Pall Wassertechnik Gmbh (Replaced)
- Secondary Buy
- Secondary Buy
NATO Stock Numbers Related to 4730-12-364-0754
4730-12-314-1975 4730-21-860-1107 4730-17-051-9708 4730-12-701-8744 4730-12-308-7951 4730-12-302-8463 4730-12-350-4335 4730-66-142-5702 4730-99-702-3467 4730-99-309-4668 4730-12-351-8782 4730-12-373-9304 4730-21-895-3510 4730-12-173-3200 4730-99-993-9263 4730-99-980-9292 4730-12-362-2247 4730-12-189-0602