4730-21-912-9520

shutoff; ferrule (as modified); and hand screw. https//www.nsnlookup.com /fsg-47/fsc-4730/ca 4730-21-912-9520
Pipe To Tube Straight Adapter 4730219129520 https//www.nsnlookup.com /fsg-53/fsc-5310/uk 5310-99

Reference RNCC 5 RNVC 1 DAC 4 C2094 10 07 MN0 A2103 https//www.nsnlookup.com /fsg-47/fsc-4730/ca 4730-21-912-9520
Pipe To Tube Straight Adapter 4730219129520 https//www.nsnlookup.com /fsg-53/fsc-5310/uk 5310-99

6320-21-001-6080 6320210016080 210016080 is a frame or inclosure which spaces and retains the rolling elements of a bearing, ball (as modified).

2010-00-922-2803 2010009222803 009222803 FLANGE,SHAFT

5310-99-546-5524 5310995465524 995465524 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.