What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Pipe Bend?

A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Soil Pipe Increaser?

A Soil Pipe Increaser (INCREASER,SOIL PIPE) is a straight fitting with the hub end larger than the spigot end. It is used to connect two pieces of soil pipe of different size.

What is a Soil Pipe Reducer?

A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Pipe Lateral?

A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

What is a Pipe To Tube Tee?

A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.

A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.

What is a Soil Pipe Lateral?

A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.

What is a Soil Pipe Tee?

A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.

What is a Tube Coupling Inverted Nut?

A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.

What is a Hose Coupling Nut?

A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.

What is a Tube Coupling Nut?

A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.

What is an Union Tailpiece?

An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.

What is an Union Thread Piece?

An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.

What is a Sediment Strainer?

A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.

What is a Hose Coupling Assembly?

A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.

Hose, Pipe, Tube, Lubrication, and Railing Fittings - Canada (CA)

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Federal Supply Group (FSG): 47 Pipe, Tubing, Hose, and Fittings

NATO Supply Classification Group (NSG): 47 Pipe, Tubing, Hose, and Fittings

Items Managed by Canada (CA) - NCB is 20 or 21

Page 37 of 63

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings
Codified by Canada

47	30	21	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings - Canada (CA)

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 26 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 269 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 17 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Elbow? 54 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 61 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 21 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Hose Cap? 14 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Pipe Elbow? 850 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 44 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 675 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 658 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 181 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Pipe To Hose Straight Adapter? 273 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 1069 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 317 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Pipe Bushing? 434 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Hose Nipple? 14 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 925 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 262 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 10 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 229 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Tube Union? 37 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 69 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Pipe Bend? 20 Items: A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.
What is a Return Tube Bend? 20 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 72 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 73 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Soil Pipe Increaser? 14 Items: A Soil Pipe Increaser (INCREASER,SOIL PIPE) is a straight fitting with the hub end larger than the spigot end. It is used to connect two pieces of soil pipe of different size.
What is a Soil Pipe Reducer? 18 Items: A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.
What is a Pipe Flange? 339 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 12 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 46 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Pipe Lateral? 29 Items: A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Tube Lateral? 65 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 22 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 648 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Tube Tee? 325 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Tube Tee? 671 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Soil Pipe Lateral? 49 Items: A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.
What is a Soil Pipe Tee? 74 Items: A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.
What is a Tube Coupling Inverted Nut? 37 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 37 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 212 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is an Union Tailpiece? 44 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 10 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
Expansion Joint,Pipe 159 Items
What is a Sediment Strainer? 128 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
What is a Hose Coupling Assembly? 18 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 146 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
Clamp,Pipe,Anchor And Reinforcement 15 Items
What is a Pipe Repair Clamp? 48 Items: A Pipe Repair Clamp (CLAMP,REPAIR,PIPE) is a one-piece or two-piece metal clamp generally used with gasket(s) and designed to repair longitudinal splits and pit holes and/or to support thin walls in a straight run of pipe. See also CLAMP, LEAK REPAIR, PIPE COUPLING.
What is a Pipe Cap? 107 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 135 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 14 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 383 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 438 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 223 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
What is a Water Closet Spud? 15 Items: A Water Closet Spud (SPUD,WATER CLOSET) is a short coupling of nonferrous metal flanged at one end and with iron pipe threads extending from the other end to the base of the flange. It is generally used to join a water closet bowl to the flushing water supply and is usually supplied with locknut and washer.
What is a Pipe Reducer? 353 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 451 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Pipe Cross? 52 Items: A Pipe Cross (CROSS,PIPE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is designed to be used as a junction at the intersection of pipe and/or pipe fittings.
What is a Tube Cross? 48 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Slip Joint Nut? 15 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Pipe Locknut? 37 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Drainage Pipe Lateral? 43 Items: A Drainage Pipe Lateral (LATERAL,DRAINAGE PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees (1.5705 radians) to the run. It is used as a junction at the intersection of a drainage line and is provided with a shoulder(s) at the end(s) of its internal threaded or unthreaded portion, conforming to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It may have side inlet(s).
What is a Drainage Pipe Tee-Y? 86 Items: A Drainage Pipe Tee-Y (TEE-Y,DRAINAGE PIPE) is a fitting having one or two branches whose internal and/or external portions form a sweep or radius to the run with the connections fixed at 90 degrees (1.5705 radians) to the run. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and to provide a smooth flow ofthe pipe and/or pipe fitting contents. It may have side inlet(s).
What is a Hose Clamp? 651 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 11 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Pipe Clamp Coupling? 19 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is an Air Line Manifold? 11 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 24 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Soil Pipe Trap? 20 Items: A Soil Pipe Trap (TRAP,SOIL PIPE) is a device having hub and/or spigot ends. It is used in drain of soil systems to prevent sewer gas from backing up beyond desired point by forming a water seal in the line. This is accomplished by its peculiar shape which is usually in the form of a letter P or S. It may have side inlet and/or cleanout.
What is a Pipeline Flexible Spacer? 98 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is an Adapter Bushing? 14 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 25 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 30 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 88 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 53 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 56 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Drainage Pipe Trap? 19 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 107 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 17 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Self-Sealing Coupling Half? 38 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
What is a Drainage Pipe Elbow? 63 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is an Air Trap? 10 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Swivel Flange To Hose Elbow? 33 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 99 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 432 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 87 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 125 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Solder Type Tube Fitting Plug? 14 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 71 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Quick Disconnect Coupling Assembly? 68 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Fluid Flow Restrictor Unit? 15 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is an Air Hose Connector? 10 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
What is a Magnetic Pipe Plug? 17 Items: A Magnetic Pipe Plug (PLUG,PIPE,MAGNETIC) is a pipe fitting primarily designed for installation in a lubrication or hydraulic system. It has an integral magnet in the body and external pipe threads.
What is a Hose To Boss Straight Adapter? 25 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 84 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 272 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 24 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 18 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Pipe To Boss Elbow? 19 Items: A Pipe To Boss Elbow (ELBOW,PIPE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a pipe or pipe fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like. See also ELBOW, PIPE; and ELBOW, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Boss Elbow? 144 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 18 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Tube To Boss Tee? 98 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Reducer? 60 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Outlet? 15 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 57 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 58 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Hose Straight Adapter? 40 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 22 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 38 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Flange Elbow? 19 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 15 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 16 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 26 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Flange Tee? 34 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Soil Pipe Coupling? 16 Items: A Soil Pipe Coupling (COUPLING,SOIL PIPE) is a straight fitting used to connect two pieces of soil pipe of the same size.
What is a Quick Disconnect Cap? 16 Items: A Quick Disconnect Cap (CAP,QUICK DISCONNECT) is a fluid line fitting having an internal quick disconnect feature, designed to fit over a fitting with an external quick disconnect feature, to block the flow of fluid.
What is a Quick Disconnect Plug? 19 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 10 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Pipe Flange Safety Shield? 14 Items: A Pipe Flange Safety Shield (SHIELD,SAFETY,PIPE FLANGE) is an item specifically designed to fit around a pipe flange joint to confine high pressure spray from a flanged joint leak and prevents uncontrolled spray of fluids that could result in injury to personnel and damage to equipment and materials.
What is a Suction Strainer? 10 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Coupling Swage Ferrule? 11 Items: A Tube Coupling Swage Ferrule (FERRULE,SWAGE,TUBE COUPLING) is a flanged cylindrical metallic item used with a plain end tube and swaged in place. It is designed to be used as a component part of a flexible or rigid tube coupling.
What is a Tube Fitting Insert? 35 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Fluid-Emulsion Spray Nozzle? 27 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Boss Outlet? 55 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Hydraulic Manifold Assembly? 48 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Vaporizing Nozzle? 11 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hydraulic Swivel Joint? 12 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 61 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 11 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.

Stock Items From Supply Class 4730 Page 37 of 63

4730-20-003-2955
Pipe To Tube Elbow

200032955
C4PM1178-1: RNCC: 3 | RNVC: 2

5 Apr 2007

4730-21-899-7065
Pipe Nipple

218997065
PF 10L-6-4: RNCC: 3 | RNVC: 2
47300624: RNCC: 6 | RNVC: 9

7 Jan 1986

4730-21-875-5661
Soil Pipe Lateral

218755661
B70: RNCC: 3 | RNVC: 1
304-6-3EXTRAHEAVY: RNCC: 5 | RNVC: 2
4730-7840: RNCC: 6 | RNVC: 9

22 Mar 1977

4730-21-861-6293
Threaded Tube Fitting Plug

218616293
A77-4: RNCC: 3 | RNVC: 2
4730-8751: RNCC: 6 | RNVC: 9

14 Oct 1971

4730-21-867-0613
Pipe Bushing

218670613
6RB2: RNCC: 3 | RNVC: 2

18 Aug 1972

4730-20-006-7723
Pipe To Hose Straight Adapter

200067723
KFSSX16X16PS: RNCC: 3 | RNVC: 2
10553103-14: RNCC: 7 | RNVC: 2

5 Mar 2012

4730-21-867-0379
Hose Tee

218670379
313537: RNCC: 3 | RNVC: 2

18 Aug 1972

4730-21-708-8972

4730-21-708-4737

4730-21-875-6234
Pipe Nipple

218756234
B43: RNCC: 3 | RNVC: 1
349: RNCC: 5 | RNVC: 1
4730-6713: RNCC: 6 | RNVC: 9

5 Apr 1977

4730-21-899-6372
Screw Connector

218996372
453 7823-801: RNCC: 3 | RNVC: 2

5 Sep 1985

4730-21-843-4908
Hose Clamp

218434908
F0640425: RNCC: 3 | RNVC: 2
F0640425: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-869-4384
90 De Plastic Elbow

218694384
MY20-707-20-08: RNCC: 3 | RNVC: 2

16 Apr 1974

4730-21-114-4331

4730-21-869-4432
Pipe Expansion Joint

218694432
10: RNCC: 3 | RNVC: 1
PA1062: RNCC: 3 | RNVC: 2

10 Apr 1974

4730-21-869-4435
Pipe Expansion Joint

218694435
10: RNCC: 3 | RNVC: 1
PA1068: RNCC: 3 | RNVC: 2
4227-0049: RNCC: 6 | RNVC: 9

10 Apr 1974

4730-21-904-8184
Tube Coupling

219048184
207874: RNCC: 3 | RNVC: 2

24 Jun 1988

4730-21-850-2809
Nozzle Flange

218502809
S2373-3: RNCC: 3 | RNVC: 2

6 Oct 1968

4730-21-899-5788
Pipe Coupling

218995788
46018: RNCC: 3 | RNVC: 2
47304895: RNCC: 6 | RNVC: 9

13 Jun 1985

4730-20-006-8583
Elbow

200068583
14866: RNCC: 3 | RNVC: 2

24 Apr 2012

4730-21-878-9277
Quick Disconnect Coupling Half

218789277
2726: RNCC: 3 | RNVC: 2
4730-7098: RNCC: 6 | RNVC: 9

28 Mar 1978

4730-21-904-8124
Lubrication Fitting

219048124
31196: RNCC: 3 | RNVC: 2

19 May 1988

4730-21-904-9770
Hose Clamp

219049770
EZ 272: RNCC: 3 | RNVC: 2

6 Jun 1989

4730-21-840-6904

4730-21-856-8287

4730-21-797-1393
Piping Bushing

217971393
PM4N: RNCC: 3 | RNVC: 2

30 Nov 1965

4730-21-884-2923
Pipe Elbow

218842923
1702: RNCC: 3 | RNVC: 1
452E: RNCC: 3 | RNVC: 1

19 May 1981

4730-21-856-9945

4730-21-882-5183
Pipe To Hose Straight Adapter

218825183
320-382-748: RNCC: 3 | RNVC: 2
CKM5ANDCK1/8PK3: RNCC: 3 | RNVC: 2

16 Apr 1980

4730-20-007-3124
Flange Assembly

200073124
4180.1.504: RNCC: 3 | RNVC: 2

6 Dec 2012

4730-21-895-3623
Drain Tee

218953623
28-380-B: RNCC: 3 | RNVC: 2

6 Mar 1984

4730-21-668-5393
Pipe Nipple

216685393
339: RNCC: 3 | RNVC: 1
A53: RNCC: 3 | RNVC: 1
ID443933: RNCC: 6 | RNVC: 9
456-7655: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-860-2245
Bronze Nozzle

218602245
D4A28: RNCC: 3 | RNVC: 2

17 Dec 1970

4730-21-107-8902
Suction Strainer

211078902
WA2780: RNCC: 3 | RNVC: 2

6 Jun 1968

4730-21-912-1910
Pipe Elbow

219121910
9475505: RNCC: 3 | RNVC: 2

18 Jul 1995

4730-21-884-2840
Backing Ring

218842840
1993: RNCC: 3 | RNVC: 1

19 May 1981

4730-21-686-0159
Hose To Gas Fitting Straight Adapter

216860159
0-0: RNCC: 3 | RNVC: 1

6 Jun 1968

4730-21-107-9315

4730-21-856-9416
Sediment Strainer

218569416
540TSS: RNCC: 3 | RNVC: 1

15 Jan 1970

4730-21-840-7914
Steam Trap

218407914
D1B: RNCC: 3 | RNVC: 2

6 Jun 1968

4730-21-858-3989
Tube Tee

218583989
B500-3: RNCC: 3 | RNVC: 2
500-3: RNCC: 5 | RNVC: 2

16 Jul 1970

4730-21-852-2387
Pipe Nipple

218522387
069HD1-2IN: RNCC: 3 | RNVC: 2

12 Feb 1970

4730-21-810-4146
Nut Gland

218104146
CE9226-4: RNCC: 3 | RNVC: 2
9226-4: RNCC: 3 | RNVC: 2

26 Sep 1963

4730-21-913-8539
Tube Elbow

219138539
215-62020-2: RNCC: 3 | RNVC: 2

20 Mar 1997

4730-21-668-5237
Pipe Nipple

216685237
339: RNCC: 3 | RNVC: 1
A53: RNCC: 3 | RNVC: 1
ID443889: RNCC: 6 | RNVC: 9
456-7632: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-858-4286
Tube Cap

218584286
400C: RNCC: 3 | RNVC: 2
B400C: RNCC: 3 | RNVC: 2

16 Jul 1970

4730-21-860-2110
Steam Trap

218602110
1B: RNCC: 3 | RNVC: 1
411-9738: RNCC: 6 | RNVC: 9

17 Dec 1970

4730-21-860-2111
Steam Trap

218602111
B1: RNCC: 3 | RNVC: 1
411-9740: RNCC: 6 | RNVC: 9

17 Dec 1970

4730-21-869-3177
Pipe Reducer

218693177
8206: RNCC: 3 | RNVC: 2

18 Oct 1973

4730-21-910-1621
Pipe To Hose Straight Adapter

219101621
CAO11043: RNCC: 3 | RNVC: 2

15 Jan 1994

4730-21-840-6228
Tube Coupling

218406228
B16-22: RNCC: 3 | RNVC: 1

6 Jun 1968

4730-21-881-7364
Pipe To Hose Straight Adapter

218817364
125-2A: RNCC: 3 | RNVC: 2

23 Oct 1979

4730-20-009-0823

4730-21-913-1626
Hydraulic Manifold Assembly

219131626
26545002700: RNCC: 3 | RNVC: 2

12 Jun 1996

4730-20-003-4052
Tube To Hose Straight Adapter

200034052
1110-174: RNCC: 3 | RNVC: 2

14 Jun 2007

4730-21-896-9518
Reducing Coupling

218969518
1413: RNCC: 3 | RNVC: 2
13005-8: RNCC: 5 | RNVC: 2

15 Jan 1985

4730-21-800-6202

4730-21-116-6755

4730-21-668-3896
Pipe Nipple

216683896
339: RNCC: 3 | RNVC: 1

6 Jun 1968

4730-21-879-0402
Hose Coupling

218790402
6966357: RNCC: 3 | RNVC: 2

25 Apr 1978

4730-20-004-1287
Crimp Ring

200041287
PCCR4X: RNCC: 3 | RNVC: 2

21 May 2008

4730-21-867-0789
Pipe Elbow

218670789
60UA12X12: RNCC: 3 | RNVC: 2
4730-5695: RNCC: 6 | RNVC: 9

18 Aug 1972

4730-21-884-2494
Pipe Flange

218842494
294E: RNCC: 3 | RNVC: 1

14 Apr 1981

4730-21-884-2928
Repair Kit For Seri

218842928
NOPARTNO: RNCC: 3 | RNVC: 2

19 May 1981

4730-21-864-8644
Drainage Pipe Elbow

218648644
47011: RNCC: 3 | RNVC: 2
2203: RNCC: 3 | RNVC: 2

16 Jun 1972

4730-21-858-4270
Pipe To Tube Straight Adapter

218584270
301A4F: RNCC: 2 | RNVC: 2

16 Jul 1970

4730-21-864-8216
Hose Mender

218648216
1435: RNCC: 3 | RNVC: 1

19 May 1972

4730-21-879-0400
Hose Clamp

218790400
451207: RNCC: 3 | RNVC: 2

25 Apr 1978

4730-21-668-4207
Pipe Nipple

216684207
350: RNCC: 3 | RNVC: 1
B43: RNCC: 3 | RNVC: 1
440-6617: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-669-0330
Blind Pipe Flange

216690330
0-0: RNCC: 3 | RNVC: 1

6 Jun 1968

4730-21-875-7997
Pipe Union

218757997
554 1-2: RNCC: 3 | RNVC: 2
4730-5313: RNCC: 6 | RNVC: 9

17 May 1977

4730-21-012-1771
Fluid-Emulsion Spray Nozzle

210121771
50080: RNCC: 3 | RNVC: 2

22 Apr 1995

4730-21-003-8612

4730-21-891-4061
Pipe Coupling

218914061
167108703000: RNCC: 3 | RNVC: 2

1 Nov 1982

4730-21-892-2731
Spud

218922731
47300125: RNCC: 3 | RNVC: 2

15 Mar 1983

4730-21-905-5588
Block Clamp

219055588
074-25-3494: RNCC: 3 | RNVC: 2

8 Jun 1989

4730-20-002-9775
Hose To Boss Elbow

200029775
A-653: RNCC: 3 | RNVC: 2

12 Oct 2006

4730-20-005-1305
Quick Disconnect Coupling Half

200051305
MA003390-2: RNCC: 3 | RNVC: 2

28 Oct 2009

4730-20-005-5540
Hose Elbow

200055540
A2701-8: RNCC: 3 | RNVC: 2
HW20222: RNCC: 5 | RNVC: 2

10 May 2010

4730-21-920-8922
Quick Disconnect Reducer

219208922
10597029: RNCC: 3 | RNVC: 2

2 Nov 2000

4730-20-012-2853

4730-20-010-2873

4730-20-010-2856

4730-21-668-5220
Pipe Nipple

216685220
350: RNCC: 3 | RNVC: 1
B43: RNCC: 3 | RNVC: 1
440-6671: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-20-001-5526
Pipe To Tube Straight Adapter

200015526
FFP051273: RNCC: 3 | RNVC: 2

29 Jul 2004

4730-20-006-7042
Fitting

200067042
MPTARB150: RNCC: 3 | RNVC: 2

30 Jan 2012

4730-21-669-1657
Pipe Tee

216691657
1761: RNCC: 3 | RNVC: 1
A 234: RNCC: 4 | RNVC: 1
458-9204: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-890-2409
Victaulic Coupling

218902409
2-IN: RNCC: 3 | RNVC: 2

22 Aug 1982

4730-21-872-9959
Pipe To Tube Straight Adapter

218729959
2021-4-5B: RNCC: 3 | RNVC: 2

28 Oct 1975

4730-21-002-0598

4730-21-583-0159

4730-20-008-9353

4730-21-887-6461
Tube Tee

218876461
414222400: RNCC: 3 | RNVC: 2

16 Nov 1981

4730-21-875-2726
Boss Outlet

218752726
ASTMB61: RNCC: 4 | RNVC: 1

1 Dec 1976

4730-21-820-6391

4730-21-819-8388

4730-21-669-0541
Pipe Flange

216690541
B16-5: RNCC: 4 | RNVC: 1
A 105: RNCC: 4 | RNVC: 1

6 Jun 1968

4730-21-798-4820
Protective Lubrication Fitting Cap

217984820
0-0: RNCC: 3 | RNVC: 1

6 Jun 1968

4730-21-671-2542
Tube Elbow

216712542
B16-22: RNCC: 3 | RNVC: 1
W-2051: RNCC: 3 | RNVC: 2

25 May 1968

4730-21-901-5828
Tube Fitting

219015828
WW486765AT: RNCC: 3 | RNVC: 2

22 Feb 1988

4730-21-814-5389

4730-21-856-8543
Tailpiece

218568543
2051012: RNCC: 3 | RNVC: 2

18 Nov 1969

4730-21-668-4204
Pipe Nipple

216684204
350: RNCC: 3 | RNVC: 1
B43: RNCC: 3 | RNVC: 1
440-6614: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-881-7365
Tee

218817365
240832: RNCC: 3 | RNVC: 2

23 Oct 1979

4730-21-107-9591
Packing Nut

211079591
ZA29472: RNCC: 3 | RNVC: 2

6 Jun 1968

4730-21-668-5421
Pipe Nipple

216685421
339: RNCC: 3 | RNVC: 1
A72: RNCC: 3 | RNVC: 1
3244914: RNCC: 5 | RNVC: 2
219892: RNCC: 5 | RNVC: 2
ID443949: RNCC: 6 | RNVC: 9

28 May 1968

4730-21-669-1016
Pipe Flange

216691016
1921: RNCC: 3 | RNVC: 1
9902B2-2-1: RNCC: 3 | RNVC: 1
B16-5: RNCC: 3 | RNVC: 1
A 181: RNCC: 4 | RNVC: 1

25 May 1968

4730-20-003-4116
Gauge And H Fitting

200034116
2015-A12: RNCC: 3 | RNVC: 2

18 Jun 2007

4730-21-860-2113
Steam Trap

218602113
3B: RNCC: 3 | RNVC: 1
411-9756: RNCC: 6 | RNVC: 9

17 Dec 1970

4730-20-003-8917
Lon Flange Assembly

200038917
0377287-1: RNCC: 3 | RNVC: 2

6 Feb 2008

4730-21-670-0139
Lubrication Fitting

216700139
1982B: RNCC: 3 | RNVC: 2
1982B: RNCC: 3 | RNVC: 2
1982B: RNCC: 3 | RNVC: 2

6 Jun 1968

4730-21-892-2575
Adapter

218922575
16909017800: RNCC: 3 | RNVC: 2

28 Feb 1983

4730-21-884-1685
Pipe Coupling

218841685
0-0: RNCC: 3 | RNVC: 1

20 Jan 1981

4730-21-884-1587
Soil Pipe Coupling

218841587
0-0: RNCC: 3 | RNVC: 1

13 Jan 1981

4730-21-845-7019
Pipe Flange

218457019
B16-1: RNCC: 3 | RNVC: 1
4730-6850: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-860-0354
Copper To Coupling

218600354
C1801-8: RNCC: 3 | RNVC: 1

17 Sep 1970

4730-21-815-1312
Tube To Hose Straight Adapter

218151312
G77032-6: RNCC: 3 | RNVC: 2

1 Feb 1965

4730-21-879-3002
Steam Trap

218793002
B1X15: RNCC: 3 | RNVC: 1
4730-8270: RNCC: 6 | RNVC: 9

18 Jul 1978

4730-21-814-4667
Tube Tee

218144667
PA834D080404: RNCC: 3 | RNVC: 2

6 Jun 1968

4730-21-896-9202
Pipe Tee

218969202
13302: RNCC: 3 | RNVC: 2
47300174: RNCC: 6 | RNVC: 9

9 Dec 1984

4730-21-820-0265
Sleeve Solderless

218200265
811T10D: RNCC: 3 | RNVC: 2

1 Mar 1965

4730-21-878-6386
Tube Fitting Insert

218786386
1484X10: RNCC: 3 | RNVC: 2
4730-9896: RNCC: 6 | RNVC: 9

14 Feb 1978

4730-21-901-5838
Adapter

219015838
NR.1007.60.07: RNCC: 3 | RNVC: 2
W4628133: RNCC: 5 | RNVC: 2

23 Feb 1988

4730-21-860-2174
Soil Pipe Increaser

218602174
386: RNCC: 3 | RNVC: 1
400-5684: RNCC: 6 | RNVC: 9

17 Dec 1970

4730-21-875-6232
Pipe Nipple

218756232
B43: RNCC: 3 | RNVC: 1
349: RNCC: 5 | RNVC: 1
4730-6711: RNCC: 6 | RNVC: 9

5 Apr 1977

4730-21-869-3776
Tube Fitting Insert

218693776
T304-1: RNCC: 3 | RNVC: 2
TEFL0N304-1: RNCC: 3 | RNVC: 2

28 Dec 1973

4730-21-860-2349
Pipe Elbow

218602349
B16-4: RNCC: 3 | RNVC: 1
742EJVWU: RNCC: 3 | RNVC: 2
447-6265: RNCC: 6 | RNVC: 9

17 Dec 1970

4730-21-820-6194

4730-21-848-8146

4730-21-901-4187
Tube To Hose Elbow

219014187
880112-8D: RNCC: 3 | RNVC: 2

27 Jan 1987

4730-21-685-1036
Hose Reducer

216851036
9900C7: RNCC: 3 | RNVC: 2

6 Jun 1968

4730-21-668-4912
Pipe Nipple

216684912
350: RNCC: 3 | RNVC: 1
B43: RNCC: 3 | RNVC: 1
440-6656: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-899-7169
Pipe Elbow

218997169
PF 20-8-4: RNCC: 3 | RNVC: 2
47300569: RNCC: 6 | RNVC: 9

30 Jan 1986

4730-20-000-7368
Steering Adapter

200007368
A2704-8-6: RNCC: 3 | RNVC: 2
10699491: RNCC: 7 | RNVC: 2

28 Apr 2003

4730-21-669-1130
Pipe Flange

216691130
B16-5: RNCC: 4 | RNVC: 1

30 Nov 1965

4730-21-860-2351
Pipe Elbow

218602351
B16-4: RNCC: 3 | RNVC: 1
742EKBIU: RNCC: 3 | RNVC: 2
447-6279: RNCC: 6 | RNVC: 9

17 Dec 1970

4730-21-000-2275
Coupling Nut

210002275
2054002: RNCC: 3 | RNVC: 2

25 May 1968

4730-21-912-1728
Hose To Boss Elbow

219121728
VS249F-8-8: RNCC: 3 | RNVC: 2
LS00069-1: RNCC: 5 | RNVC: 2

16 Mar 1995

4730-21-888-5371
Hose Clamp

218885371
24109: RNCC: 3 | RNVC: 2

8 Mar 1982

4730-21-808-8725

4730-21-860-2022
Steam Trap

218602022
SERIESA: RNCC: 3 | RNVC: 1
411-9425: RNCC: 6 | RNVC: 9

17 Dec 1970

4730-21-909-3497
Tube To Boss Elbow

219093497
WL421547AU: RNCC: 3 | RNVC: 2

16 May 1992

4730-21-861-8167
Tube Coupling Inverted Nut

218618167
8XHBS: RNCC: 3 | RNVC: 2

15 Sep 1972

4730-21-867-0282
Sediment Strainer Element

218670282
M200: RNCC: 3 | RNVC: 2

18 Aug 1972

4730-21-867-0666
Pipe Tee

218670666
6MT: RNCC: 3 | RNVC: 2

18 Aug 1972

4730-20-001-2706
Hose Clamp

200012706
CA1 10 039: RNCC: 3 | RNVC: 2

16 Feb 2004

4730-21-884-1833
Pipe To Tube Straight Adapter

218841833
1805: RNCC: 3 | RNVC: 1

10 Feb 1981

4730-21-670-0034
Lubrication Fitting

216700034
1815: RNCC: 3 | RNVC: 2
1815: RNCC: 3 | RNVC: 2
1815: RNCC: 5 | RNVC: 2

6 Jun 1968

4730-21-806-2051
Elbow

218062051
BK17491: RNCC: 3 | RNVC: 2

27 Aug 1969

4730-21-858-4285
Tube Cap

218584285
300C: RNCC: 3 | RNVC: 2

16 Jul 1970

4730-21-816-1434

4730-21-809-9066

4730-21-869-4285
Pipe Elbow

218694285
1380: RNCC: 3 | RNVC: 1
4730-5037: RNCC: 6 | RNVC: 9

19 Feb 1974

4730-21-904-9301
Lubrication Fitting

219049301
00586: RNCC: 3 | RNVC: 2

26 Apr 1989

4730-21-879-3018
Pipe To Hose Straight Adapter

218793018
W15535: RNCC: 3 | RNVC: 2
4730-9918: RNCC: 6 | RNVC: 9

25 Jul 1978

4730-21-879-3012
Tube To Hose Elbow

218793012
08E648: RNCC: 3 | RNVC: 2
4730-9952: RNCC: 6 | RNVC: 9

1 Aug 1978

4730-21-860-0887
Lead Flang Coupling

218600887
56-78056-1: RNCC: 3 | RNVC: 2

15 Oct 1970

4730-21-861-6137
Pipe Elbow

218616137
354E: RNCC: 3 | RNVC: 1
B16-9: RNCC: 3 | RNVC: 1

19 Aug 1971

4730-20-004-8967
Sediment Strainer

200048967
131157: RNCC: 3 | RNVC: 2

15 Jun 2009

4730-21-901-2659
Pipe Expansion Joint

219012659
B-1: RNCC: 3 | RNVC: 1
47300670: RNCC: 6 | RNVC: 9

29 Apr 1986

4730-21-912-2004
Hose Coupling

219122004
100522: RNCC: 3 | RNVC: 2
15175: RNCC: 3 | RNVC: 2
100522: RNCC: 3 | RNVC: 2
28195A: RNCC: 5 | RNVC: 2

25 Oct 1995

4730-21-913-4208
Hydraulic System Accessories Manifold

219134208
10626871: RNCC: 1 | RNVC: 2
10660: RNCC: 3 | RNVC: 2

1 Apr 1998

4730-21-818-4781

4730-21-840-6234

4730-21-840-6982

4730-21-887-8613
Pipe Tee

218878613
1164R: RNCC: 3 | RNVC: 1

7 Dec 1981

4730-21-669-1285
Blind Pipe Flange

216691285
1961: RNCC: 3 | RNVC: 1
B16-5: RNCC: 4 | RNVC: 1
A 181: RNCC: 4 | RNVC: 1

30 Nov 1965

4730-21-864-7115

4730-21-864-7069

4730-21-846-5293
Pipe Tee

218465293
B16-3: RNCC: 3 | RNVC: 1
1105R: RNCC: 3 | RNVC: 1
4730-5124: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-878-6344
Threaded Tube Fitting Plug

218786344
C5229X8: RNCC: 3 | RNVC: 2
4730-9657: RNCC: 6 | RNVC: 9

14 Feb 1978

4730-21-884-1547
Pipe Cap

218841547
278E: RNCC: 3 | RNVC: 1

6 Jan 1981

4730-21-896-4300

4730-21-884-2288
Pipe Bushing

218842288
383: RNCC: 3 | RNVC: 1

31 Mar 1981

4730-21-909-0390
Hose Clamp

219090390
06.50.468.075: RNCC: 3 | RNVC: 2
26002100500: RNCC: 5 | RNVC: 2
C4163 151M: RNCC: 5 | RNVC: 2

12 Dec 1991

4730-21-921-5269
Swivel Flange To Hose Straight Adapter

219215269
86533: RNCC: 3 | RNVC: 2

2 Jan 2002

4730-21-892-2746
Pipe Tee

218922746
B16-3: RNCC: 3 | RNVC: 1
47300155: RNCC: 6 | RNVC: 9

21 Mar 1983

4730-21-816-7177
Hose Clamp

218167177
7431: RNCC: 3 | RNVC: 2
11352-1: RNCC: 3 | RNVC: 2

14 Jul 1964

4730-21-909-3059
Coupling

219093059
B-0498: RNCC: 3 | RNVC: 2

7 Feb 1992

4730-21-070-1592

4730-21-668-5270
Pipe Nipple

216685270
A72: RNCC: 3 | RNVC: 1
339: RNCC: 3 | RNVC: 1
ID443910: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-907-7857
Hose Clamp

219077857
900 03 98 9312: RNCC: 3 | RNVC: 2

21 Dec 1990

4730-21-896-4577
Hose Ring

218964577
HX408: RNCC: 3 | RNVC: 2
16918042900: RNCC: 5 | RNVC: 2

29 Jul 1984

4730-20-006-8563
Elbow

200068563
23388: RNCC: 3 | RNVC: 2

23 Apr 2012

4730-21-878-5041
Tube To Boss Elbow

218785041
C5515X12X10: RNCC: 3 | RNVC: 2
4730-9537: RNCC: 6 | RNVC: 9

31 Jan 1978

4730-21-875-6165
Pipe Nipple

218756165
B34: RNCC: 3 | RNVC: 1
4730-6772: RNCC: 6 | RNVC: 9

5 Apr 1977

4730-20-007-5276
Sediment Strainer

200075276
3004759: RNCC: 3 | RNVC: 2

12 Mar 2013

4730-21-850-4665
Pipe Plug

218504665
AWK2A8: RNCC: 3 | RNVC: 2

6 Oct 1968

4730-21-814-7150

4730-21-867-0502
Pipe Reducer

218670502
2HRCG1: RNCC: 3 | RNVC: 2

18 Aug 1972

4730-21-892-3049
Pipe Spacer

218923049
47300073: RNCC: 3 | RNVC: 2

2 Apr 1983

4730-20-002-4285
Pitot Pressure Tube

200024285
130014AS310-2: RNCC: 3 | RNVC: 2

22 Dec 2005

4730-21-668-2922
Pipe Elbow

216682922
B16-4: RNCC: 3 | RNVC: 1
447-6105: RNCC: 6 | RNVC: 9

30 Nov 1965

4730-20-007-6351
Lubricant Pressure Relief Fitting

200076351
14584115: RNCC: 3 | RNVC: 2

8 May 2013

4730-21-892-2083
Nipple

218922083
159192078: RNCC: 3 | RNVC: 2

22 Jan 1983

4730-21-860-0327
Pipe Coupling

218600327
IC: RNCC: 3 | RNVC: 1

17 Sep 1970

4730-21-881-1655
Bushing

218811655
600135: RNCC: 3 | RNVC: 2

8 May 1979

4730-21-860-1135
Pipe To Tube Elbow

218601135
BA2000-4-4: RNCC: 3 | RNVC: 2
4730-8576: RNCC: 6 | RNVC: 9

12 Nov 1970

4730-21-669-0540
Pipe Flange

216690540
9902B5-2-4: RNCC: 4 | RNVC: 1
B16-5: RNCC: 4 | RNVC: 1
A 105: RNCC: 4 | RNVC: 1

30 Nov 1965

4730-21-002-0482

4730-21-891-4100

4730-21-002-0636

4730-21-894-1333
Tube To Boss Straight Adapter

218941333
31607: RNCC: 3 | RNVC: 2
383GG: RNCC: 3 | RNVC: 2

29 Oct 1983

4730-21-114-8926

4730-21-920-9336
Pipe To Hose Straight Adapter

219209336
BRB4212: RNCC: 3 | RNVC: 2

1 Dec 2000

4730-21-860-1851
Pipe Nipple

218601851
340: RNCC: 3 | RNVC: 1
456-7211: RNCC: 6 | RNVC: 9

17 Dec 1970

4730-21-861-8241
Air Hose Connector

218618241
146-5002-9: RNCC: 3 | RNVC: 2

17 Mar 1972

4730-21-816-4197

4730-21-798-4396

4730-21-799-5661

4730-21-001-1492
Pipe Elbow

210011492
3261909: RNCC: 3 | RNVC: 2

30 Nov 1965

4730-21-668-4155
Pipe Nipple

216684155
9902SHF12-1-3: RNCC: 3 | RNVC: 1

6 Jun 1968

4730-21-669-1635
Pipe Tee

216691635
1761: RNCC: 3 | RNVC: 1
A 234: RNCC: 4 | RNVC: 1
B16-9: RNCC: 4 | RNVC: 1
458-9360: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-843-4913
Steam Trap

218434913
30-4A: RNCC: 3 | RNVC: 2

6 Jun 1968

4730-21-879-0397
Clamp

218790397
265160: RNCC: 3 | RNVC: 2
6964620: RNCC: 5 | RNVC: 2

25 Apr 1978

4730-21-901-2177
Modified Nipple

219012177
FML5084X-1: RNCC: 3 | RNVC: 2

1 Apr 1986

4730-21-904-7998
Hose Elbow

219047998
3-5433583: RNCC: 3 | RNVC: 2
6020104: RNCC: 5 | RNVC: 2

7 Sep 1989

4730-21-852-3712
Fire And B Manifold

218523712
4820LE59013: RNCC: 3 | RNVC: 2
HX55139: RNCC: 6 | RNVC: 9

24 Feb 1969

4730-21-912-9527
Pipe To Boss Straight Adapter

219129527
A-2102: RNCC: 3 | RNVC: 2

15 May 1996

4730-21-878-8393
Tailpiece

218788393
DDDS000007: RNCC: 3 | RNVC: 2

14 Mar 1978

4730-21-877-7330
Tube Nipple

218777330
C5305X16: RNCC: 3 | RNVC: 2
4730-9361: RNCC: 6 | RNVC: 9

6 Dec 1977

4730-21-875-2711
Boss Outlet

218752711
ASTMB61: RNCC: 4 | RNVC: 1

1 Dec 1976

4730-21-685-1022
Hose Coupling Nut

216851022
9900B1: RNCC: 3 | RNVC: 2

6 Jun 1968

4730-21-879-0767
Tube To Boss Tee

218790767
C5715X16: RNCC: 3 | RNVC: 2
4730-9549: RNCC: 6 | RNVC: 9

2 May 1978

4730-21-912-9195
Pipe To Boss Tee

219129195
3040-M-410-1: RNCC: 3 | RNVC: 2

19 Jan 1996

4730-21-668-5886
Pipe Nipple

216685886
801: RNCC: 3 | RNVC: 1

30 Nov 1965

4730-21-886-1554
Pipe Reducer

218861554
9205X4X6: RNCC: 3 | RNVC: 2

28 Jul 1981

4730-21-844-1069
Pipe Nipple

218441069
343: RNCC: 3 | RNVC: 1
4730-6105: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-875-2706
Boss Outlet

218752706
ASTMB61: RNCC: 4 | RNVC: 1

1 Dec 1976

4730-21-867-0617
Pipe Nipple

218670617
6HN: RNCC: 3 | RNVC: 2

18 Aug 1972

4730-21-867-0624
Pipe Reducer

218670624
8HRCG6: RNCC: 3 | RNVC: 2

18 Aug 1972

4730-21-884-2787
Pipe Bushing

218842787
221: RNCC: 3 | RNVC: 1

12 May 1981

4730-21-861-5723
Repair Kit

218615723
H1531K: RNCC: 3 | RNVC: 2

19 Aug 1971

4730-21-912-1693

4730-21-877-9111

4730-21-889-6081
Pipe Tee

218896081
4T: RNCC: 3 | RNVC: 1

3 Apr 1982

4730-21-864-7355
Pipe To Tube Straight Adapter

218647355
2CF2: RNCC: 3 | RNVC: 2

14 Apr 1972

4730-21-904-8876
Pipe Elbow

219048876
552-1/2: RNCC: 3 | RNVC: 2

9 Dec 1988

4730-20-003-5151
Tee Assembly

200035151
215T64184-6: RNCC: 3 | RNVC: 2

8 Aug 2007

4730-21-668-5563
Pipe Nipple

216685563
339: RNCC: 3 | RNVC: 1
A53: RNCC: 3 | RNVC: 1
801: RNCC: 5 | RNVC: 9
456-7676: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-20-002-8035
Cap Sleeve

200028035
22 4502 00 01 00: RNCC: 3 | RNVC: 2

22 Jun 2006

4730-21-810-6715

4730-21-670-0086
Lubricating Oil Cup

216700086
192SIZE0: RNCC: 3 | RNVC: 2
192SIZE0: RNCC: 5 | RNVC: 9

6 Jun 1968

4730-21-490-0337

4730-21-001-1493
Tube Elbow

210011493
3261910: RNCC: 3 | RNVC: 2

25 May 1968

4730-21-858-4003
Tube Reducer

218584003
200R5: RNCC: 3 | RNVC: 2

16 Jul 1970

4730-21-878-9192
Tube To Hose Elbow

218789192
24710N650: RNCC: 3 | RNVC: 2
4730-9780: RNCC: 6 | RNVC: 9

28 Mar 1978

4730-21-845-7424
Pipeline Flexible Spacer

218457424
2469: RNCC: 3 | RNVC: 1
14110: RNCC: 6 | RNVC: 9

23 Aug 1967

4730-21-802-6450

4730-21-802-7349

4730-21-805-6760

4730-21-921-6594
Karcher Adapter Kit

219216594
PA1456: RNCC: 3 | RNVC: 2

18 Feb 2002

4730-20-003-2124
Hyd Adapter Fitting

200032124
8104: RNCC: 3 | RNVC: 2

16 Feb 2007

4730-21-813-7987

4730-21-904-9048
Pipe To Tube Straight Adapter

219049048
24504: RNCC: 3 | RNVC: 2

28 Jan 1989

4730-21-871-5573
Pipe Bushing

218715573
PTR: RNCC: 3 | RNVC: 1

20 Sep 1974

4730-21-879-1664
Tube To Hose Straight Adapter

218791664
06UP08: RNCC: 3 | RNVC: 2
4730-9330: RNCC: 6 | RNVC: 9

9 May 1978

4730-21-893-7236
Union

218937236
442398: RNCC: 3 | RNVC: 2

1 Jul 1983

4730-21-668-2548
Pipe Tee

216682548
B16-4: RNCC: 3 | RNVC: 1
782E0DKE: RNCC: 3 | RNVC: 2
447-8775: RNCC: 6 | RNVC: 9
ID443324: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-858-2610
Coupling

218582610
NAS521-26-10: RNCC: 2 | RNVC: 2

12 Mar 1970

4730-21-852-2237
Tailpiec Union Half

218522237
68HD: RNCC: 3 | RNVC: 2
1208E33325: RNCC: 5 | RNVC: 2

27 Jan 1969

4730-21-864-8710
Drainage Pipe Elbow

218648710
47381: RNCC: 3 | RNVC: 2

16 Jun 1972

4730-21-864-7317
Tube Coupling Nut

218647317
402K1: RNCC: 3 | RNVC: 2

14 Apr 1972

4730-21-668-3293
Drainage Pipe Lateral

216683293
B16-12: RNCC: 3 | RNVC: 1
1028: RNCC: 3 | RNVC: 1
402-1919: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-816-1860
Quick Disconnect Coupling Half

218161860
8900503-1: RNCC: 3 | RNVC: 2
VC8F: RNCC: 3 | RNVC: 2

28 Aug 1964

4730-21-668-0765
Pipe Tee

216680765
B16-3: RNCC: 3 | RNVC: 1
452-8075: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-884-1904
Pipe Expansion Joint

218841904
8100-50: RNCC: 3 | RNVC: 2
D-03-003-21/SG-005: RNCC: 5 | RNVC: 2

18 Feb 1981

4730-21-879-1013
Plug

218791013
1-483-462-070: RNCC: 3 | RNVC: 2
M22X1-5-1483-462-0: RNCC: 3 | RNVC: 2

9 May 1978

4730-21-670-0107
Grease Cup

216700107
7004: RNCC: 3 | RNVC: 1
400-11-4: RNCC: 5 | RNVC: 2

6 Jun 1968

4730-21-668-9639
Pipe Plug

216689639
S959: RNCC: 3 | RNVC: 2

6 Jun 1968

4730-21-849-0733
Swivel Flange To Hose Elbow

218490733
614-24S: RNCC: 3 | RNVC: 2
4730-3708: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-799-6302

4730-21-669-0021
Pipe Flange

216690021
151E: RNCC: 3 | RNVC: 1
A 126: RNCC: 4 | RNVC: 1
444-4507: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-669-3709
Tube Outlet

216693709
9902SHF9-2-1: RNCC: 3 | RNVC: 1
B 61: RNCC: 4 | RNVC: 1

6 Jun 1968

4730-21-860-2374
Pipe Elbow

218602374
B16-4: RNCC: 3 | RNVC: 1
1061H0RSU: RNCC: 3 | RNVC: 2
447-6569: RNCC: 6 | RNVC: 9

17 Dec 1970

4730-21-668-2259
Pipe Tee

216682259
B16-4: RNCC: 3 | RNVC: 1
447-8301: RNCC: 6 | RNVC: 9
ID443208: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-901-4272
Sediment Strainer

219014272
8509090: RNCC: 3 | RNVC: 2

30 Jan 1987

4730-21-840-7017

4730-21-668-9595
Pipe Plug

216689595
LM488-999H0241: RNCC: 3 | RNVC: 1
B16-15: RNCC: 3 | RNVC: 1
20FM7E3-8: RNCC: 3 | RNVC: 2
B 61: RNCC: 4 | RNVC: 1

18 Aug 1966

4730-21-668-3720
Drainage Pipe Trap

216683720
JR3946: RNCC: 3 | RNVC: 1

6 Jun 1968

4730-20-006-7286
Quick Disc Assembly

200067286
14584136: RNCC: 3 | RNVC: 2

10 Feb 2012

4730-21-890-2449
Pipe Coupling

218902449
676: RNCC: 3 | RNVC: 2

28 Aug 1982

4730-21-884-2296
Pipe Bushing

218842296
383: RNCC: 3 | RNVC: 1

31 Mar 1981

4730-21-895-3099
Pipe To Tube Straight Adapter

218953099
372/8/12: RNCC: 3 | RNVC: 2
47304241: RNCC: 6 | RNVC: 9

28 Jan 1984

4730-21-909-4860
Pipe To Hose Straight Adapter

219094860
9175654-2: RNCC: 3 | RNVC: 2

27 Apr 1993

4730-21-894-1684
Tube Elbow

218941684
W7401: RNCC: 3 | RNVC: 2

26 Nov 1983

4730-21-840-6972

4730-21-904-8653
Pipe Tee

219048653
2116A: RNCC: 3 | RNVC: 2
27046: RNCC: 5 | RNVC: 2

22 Oct 1988

4730-21-797-2446
Tube Cap

217972446
17T6723: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-912-9353
Quick Disconnect Coupling Half

219129353
W 4170 625: RNCC: 3 | RNVC: 2
25511130800: RNCC: 5 | RNVC: 2

3 Mar 1996

4730-21-864-8590
Pipe Union

218648590
571: RNCC: 3 | RNVC: 1

16 Jun 1972

4730-21-899-6080
Elbow Adapter

218996080
469-CB: RNCC: 3 | RNVC: 2

18 Jul 1985

4730-21-861-7139

4730-21-861-8243

4730-21-861-7080

4730-21-894-1385
Pipe Plug

218941385
260-902: RNCC: 3 | RNVC: 2

5 Nov 1983

4730-21-668-1034
Pipe Union

216681034
519: RNCC: 3 | RNVC: 1

6 Jun 1968

4730-21-686-0031
Hose Clamp

216860031
BULLD0G: RNCC: 3 | RNVC: 1

25 May 1968

4730-21-673-1740
Pipe To Tube Straight Adapter

216731740
46F: RNCC: 3 | RNVC: 1

4 Jun 1968

4730-21-670-0189
Lubrication Fitting

216700189
NB5975: RNCC: 3 | RNVC: 2

6 Jun 1968

4730-21-912-1791
Loop Clamp

219121791
250022: RNCC: 3 | RNVC: 2
515008: RNCC: 5 | RNVC: 9

21 Jul 1995

4730-21-671-2236
Tube Elbow

216712236
B16-22: RNCC: 3 | RNVC: 1
9106-2: RNCC: 3 | RNVC: 1
442-4074: RNCC: 6 | RNVC: 9

25 May 1968

4730-21-901-3394
Pipe Flange

219013394
641: RNCC: 3 | RNVC: 2

4 Sep 1986

4730-20-007-2088
Coupler

200072088
66-8: RNCC: 3 | RNVC: 2

16 Oct 2012

4730-21-860-2599
Pipe Tee

218602599
IRT: RNCC: 3 | RNVC: 1

14 Jan 1971

4730-21-893-4737
Pipe Reducer

218934737
47300137: RNCC: 3 | RNVC: 2

29 May 1983

4730-21-901-5050
Tube Tee

219015050
1605N: RNCC: 3 | RNVC: 2

17 Jul 1987

4730-20-003-3479
Tube Cap

200033479
16FJ-CAP: RNCC: 3 | RNVC: 2

9 May 2007

4730-21-669-2919
Pipe Reducer

216692919
B16-9: RNCC: 3 | RNVC: 1
A 234: RNCC: 4 | RNVC: 1
458-7249: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-20-001-1878
Tube Coupling Assembly

200011878
3038555: RNCC: 3 | RNVC: 2

29 Dec 2003

4730-21-889-6788
Pipe Nipple

218896788
47304815: RNCC: 3 | RNVC: 2

9 May 1982

4730-21-686-0148
Hose Clamp

216860148
BULLD0G: RNCC: 3 | RNVC: 1

25 May 1968

4730-21-920-8522
Sediment Strainer

219208522
54137: RNCC: 3 | RNVC: 2

20 Oct 2000

4730-21-850-1198
Adapter

218501198
150-16-8D: RNCC: 3 | RNVC: 2

22 May 1968

4730-21-864-7159

4730-20-007-1271
Tube Fitting Clinch Sleeve

200071271
3022868: RNCC: 3 | RNVC: 2

7 Sep 2012

4730-21-884-1634
Pipe Elbow

218841634
262E: RNCC: 3 | RNVC: 1

20 Jan 1981

4730-21-864-9776
Soil Pipe Tee

218649776
DF156: RNCC: 3 | RNVC: 2

14 Jul 1972

4730-21-875-6163
Pipe Nipple

218756163
B43: RNCC: 3 | RNVC: 1
349: RNCC: 5 | RNVC: 1
4730-6723: RNCC: 6 | RNVC: 9

5 Apr 1977

4730-21-844-1091
Pipe To Tube Tee

218441091
C1712R: RNCC: 3 | RNVC: 1
1612R: RNCC: 3 | RNVC: 1
4730-7540: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-668-9733
Pipe Locknut

216689733
1231: RNCC: 3 | RNVC: 1
440-6055: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-860-2176
Soil Pipe Increaser

218602176
386: RNCC: 3 | RNVC: 1
400-5688: RNCC: 6 | RNVC: 9

17 Dec 1970

4730-21-668-8842
Pipe Bushing

216688842
383: RNCC: 3 | RNVC: 1
971GEBR0: RNCC: 5 | RNVC: 9

6 Jun 1968

4730-21-668-3963
Pipe Nipple

216683963
338: RNCC: 3 | RNVC: 1
46007370: RNCC: 3 | RNVC: 1
27-001: RNCC: 3 | RNVC: 1
70-675PK: RNCC: 3 | RNVC: 2
ID443537: RNCC: 6 | RNVC: 9
456-6551: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-799-7755

4730-21-106-0278

4730-21-884-2126
Pipe Nipple

218842126
0-0: RNCC: 3 | RNVC: 1

31 Mar 1981

4730-20-006-3885
Lubricating Fitting Set

200063885
AC509: RNCC: 3 | RNVC: 2

28 Jun 2011

4730-21-909-3374
Cross Assembly

219093374
215-75079-820: RNCC: 3 | RNVC: 2

27 May 1992

4730-20-003-9653
Fitting

200039653
9976469-1: RNCC: 3 | RNVC: 2

13 Mar 2008

4730-21-858-2747
Ho Adaptor Assembly

218582747
89C43350-1: RNCC: 3 | RNVC: 2

16 Apr 1970

4730-21-869-4820

4730-21-913-3103
Inactive

4730-21-881-7361

4730-21-904-9050
Pipe To Tube Straight Adapter

219049050
24506: RNCC: 3 | RNVC: 2

28 Jan 1989

4730-21-668-5564
Pipe Nipple

216685564
A53: RNCC: 3 | RNVC: 1
339: RNCC: 3 | RNVC: 1
801: RNCC: 5 | RNVC: 9
456-7677: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-894-1757
Pipe Bushing

218941757
1/4X1/8-PTR-S: RNCC: 3 | RNVC: 2

10 Dec 1983

4730-21-840-7415
Pipe Tee

218407415
B16-3: RNCC: 3 | RNVC: 1
172AHNYG: RNCC: 3 | RNVC: 2
452-7967: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-809-4176
Tube Reducer

218094176
41A90374: RNCC: 3 | RNVC: 2

17 Feb 1972

4730-21-860-1097
Pipe To Tube Straight Adapter

218601097
A1100-6: RNCC: 3 | RNVC: 2
4730-8658: RNCC: 6 | RNVC: 9

12 Nov 1970

4730-21-668-2301
Pipe Tee

216682301
B16-4: RNCC: 3 | RNVC: 1
ID443232: RNCC: 6 | RNVC: 9
447-8075: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-907-7886
Tube To Boss Elbow

219077886
213-2214-8-8: RNCC: 3 | RNVC: 2
10552771: RNCC: 5 | RNVC: 2

29 Dec 1990

4730-21-901-3469
Pipe Nipple

219013469
13437: RNCC: 3 | RNVC: 2

10 Sep 1986

4730-21-668-3971
Pipe Nipple

216683971
A53: RNCC: 3 | RNVC: 1
338: RNCC: 3 | RNVC: 1
456-6561: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-894-1949
Quick Disconnect Coupling Half

218941949
8010-4: RNCC: 3 | RNVC: 2
47304257: RNCC: 6 | RNVC: 9

15 Jan 1984

4730-21-813-2522

4730-21-815-8865

4730-21-904-8864
Pipe Union

219048864
6407: RNCC: 3 | RNVC: 2

3 Dec 1988

4730-21-920-9740
Tube Fitting Flared Sleeve

219209740
SS25731: RNCC: 3 | RNVC: 2

4 Jan 2001

4730-21-860-2173
Soil Pipe Increaser

218602173
386: RNCC: 3 | RNVC: 1
400-5682: RNCC: 6 | RNVC: 9

17 Dec 1970

4730-21-669-1401
Blind Pipe Flange

216691401
1964: RNCC: 3 | RNVC: 1
B16-5: RNCC: 4 | RNVC: 1
A 182: RNCC: 4 | RNVC: 1

30 Nov 1965

4730-21-898-2047
Pipe Bushing

218982047
B-2-RB-1: RNCC: 3 | RNVC: 2

24 Jan 1985

4730-21-864-7365
Tube Coupling Swage Ferrule

218647365
813-1: RNCC: 3 | RNVC: 2
B813-1: RNCC: 3 | RNVC: 2

14 Apr 1972

4730-21-669-2901
Pipe Tee

216692901
B16-9: RNCC: 3 | RNVC: 1
A 234: RNCC: 4 | RNVC: 1
458-9168: RNCC: 6 | RNVC: 9

30 Nov 1965

4730-21-668-4805
Pipe Nipple

216684805
339: RNCC: 3 | RNVC: 1
A72: RNCC: 3 | RNVC: 1
ID443775: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-668-3829
Pipe Nipple

216683829
B43: RNCC: 3 | RNVC: 1
349: RNCC: 3 | RNVC: 1
440-6531: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-20-004-8619
Pipe

200048619
232868: RNCC: 3 | RNVC: 2

3 Jun 2009

4730-21-816-9003

4730-21-901-2662
Tube To Hose Straight Adapter

219012662
21134-6-6: RNCC: 3 | RNVC: 2
47300652: RNCC: 6 | RNVC: 9

28 Apr 1986

4730-21-880-1836
Tube Reducer

218801836
W1600R3X1 1-4: RNCC: 3 | RNVC: 2
4730-7256: RNCC: 6 | RNVC: 9

19 Dec 1978

4730-21-877-7386
Connection

218777386
318 005 001: RNCC: 3 | RNVC: 2

20 Dec 1977

4730-21-845-8911
Pipe Union

218458911
252H: RNCC: 3 | RNVC: 2

23 Aug 1967

4730-21-867-0616
Pipe Bushing

218670616
8RB4: RNCC: 3 | RNVC: 2

18 Aug 1972

4730-21-920-7381
Pipe To Tube Elbow

219207381
86791: RNCC: 3 | RNVC: 2

16 Aug 2000

4730-21-876-6843

4730-21-907-7289
C Connector Bushing

219077289
1101-8: RNCC: 3 | RNVC: 2

1 Feb 1990

4730-21-878-8649

4730-21-882-5381

4730-21-671-3601
Tube Tee

216713601
CB1611R: RNCC: 3 | RNVC: 1
57-17111-1: RNCC: 3 | RNVC: 1
B16-18: RNCC: 3 | RNVC: 1
A1580: RNCC: 3 | RNVC: 2
441-6507: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-872-5986
Tube To Boss Elbow

218725986
MS51528B6S: RNCC: 2 | RNVC: 2

10 Jun 1975

4730-21-861-6728
Pipe Flange

218616728
C257M144ITEM4: RNCC: 3 | RNVC: 2

14 Oct 1971

4730-20-005-4117
Hose Elbow

200054117
M80357: RNCC: 3 | RNVC: 2

26 Mar 2010

4730-21-875-6973
Pipe Nipple

218756973
B43: RNCC: 3 | RNVC: 1
347: RNCC: 5 | RNVC: 1
4730-6701: RNCC: 6 | RNVC: 9

13 Apr 1977

4730-21-881-7367
Pipe Flange

218817367
240733: RNCC: 3 | RNVC: 2

23 Oct 1979

4730-21-878-5847

4730-21-884-1649

4730-21-878-5089

4730-21-901-1429
Pipe Elbow

219011429
PF 201-6: RNCC: 3 | RNVC: 2
47300596: RNCC: 6 | RNVC: 9

11 Feb 1986

4730-21-878-9204
Tube To Hose Elbow

218789204
24705N645: RNCC: 3 | RNVC: 2
4730-9775: RNCC: 6 | RNVC: 9

5 Apr 1978

4730-21-878-8938
Pipe Expansion Joint

218788938
CSF0604: RNCC: 3 | RNVC: 2
4730-5370: RNCC: 6 | RNVC: 9

11 Apr 1978

4730-21-878-8647

4730-21-895-3178
Lubrication Fitting

218953178
5350: RNCC: 3 | RNVC: 2

4 Feb 1984

4730-21-888-4045

4730-21-888-4374

4730-21-877-9100
Tube Coupling Nut

218779100
1461X12: RNCC: 3 | RNVC: 2
4730-9849: RNCC: 6 | RNVC: 9

17 Jan 1978

4730-21-884-1913

4730-21-669-0502
Pipe Flange

216690502
A 105: RNCC: 4 | RNVC: 1
B16-5: RNCC: 4 | RNVC: 1

30 Nov 1965

4730-20-007-9222
Fluid Passage Bolt

200079222
705600092: RNCC: 3 | RNVC: 2

16 Sep 2013

4730-21-910-1862
Flange To Hose Elbow

219101862
98418514: RNCC: 3 | RNVC: 2

30 Aug 1994

4730-21-882-5823
White Plastic Boss

218825823
C4B175070: RNCC: 3 | RNVC: 2

13 Nov 1980

4730-21-858-4977
Pipe To Tube Straight Adapter

218584977
C1805: RNCC: 3 | RNVC: 1

17 Sep 1970

4730-21-875-6221
Pipe Nipple

218756221
B43: RNCC: 3 | RNVC: 1
349: RNCC: 5 | RNVC: 1
4730-6716: RNCC: 6 | RNVC: 9

5 Apr 1977

4730-21-871-5350

4730-21-669-0016
Pipe Flange

216690016
1573: RNCC: 3 | RNVC: 2

6 Jun 1968

4730-21-879-0512
Tube To Boss Tee

218790512
C5715X5: RNCC: 3 | RNVC: 2
4730-9544: RNCC: 6 | RNVC: 9

25 Apr 1978

4730-21-864-7811
Pipe Elbow

218647811
240: RNCC: 3 | RNVC: 1

19 May 1972

4730-21-849-2650
Hose Clamp

218492650
S72: RNCC: 3 | RNVC: 2

21 Mar 1968

4730-21-882-5464
Hose Clamp

218825464
R-2276: RNCC: 3 | RNVC: 2

16 Jul 1980

4730-21-078-8005
Pipe Plug

210788005
8M245: RNCC: 3 | RNVC: 2
HC1109-7: RNCC: 5 | RNVC: 2

25 Jul 1966

4730-21-850-2732
Soil Pipe Cleanout

218502732
98-6: RNCC: 3 | RNVC: 2

6 Oct 1968

4730-21-815-0733
Hose Clamp

218150733
QS200M148: RNCC: 3 | RNVC: 2
QS200M148W: RNCC: 3 | RNVC: 2

26 Jun 1964

4730-21-913-8536
Pipe To Boss Tee

219138536
215-62013: RNCC: 3 | RNVC: 2

20 Mar 1997

4730-21-901-2251
Pipe Elbow

219012251
2150-1 1/4: RNCC: 3 | RNVC: 2
FML4312X48: RNCC: 5 | RNVC: 2

8 Apr 1986

4730-21-668-2126
Pipe Elbow

216682126
B16-4: RNCC: 3 | RNVC: 1
447-6245: RNCC: 6 | RNVC: 9

30 Nov 1965

4730-21-668-2258
Pipe Tee

216682258
B16-4: RNCC: 3 | RNVC: 1
447-8230: RNCC: 6 | RNVC: 9
ID443207: RNCC: 6 | RNVC: 9

6 Jun 1968

4730-21-880-1749
Tube Lateral

218801749
C1810R2X2X1 1-4: RNCC: 3 | RNVC: 2
4730-8876: RNCC: 6 | RNVC: 9

19 Dec 1978

4730-21-686-0147
Quick Disconnect Coupling Half

216860147
8500380M: RNCC: 3 | RNVC: 2

6 Jun 1968

4730-21-889-6606
Pin Stream Nozzle

218896606
11129: RNCC: 3 | RNVC: 2

26 Apr 1982

Load More Results