What is Federal Supply Class 4730?

FSC 4730 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

What is NATO Supply Classification Class 4730?

NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.

Which Federal Supply Group is FSC 4730 in?

FSC 4730 is in Federal Supply Group (FSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

Which NATO Supply Classification Group is NSC 4730 in?

NSC 4730 is in NATO Supply Classification Group (NSG) 47 which contains Pipe, Tubing, Hose, and Fittings.

What is a Grease Cup?

A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.

What is a Lubrication Fitting?

A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.

What is a Lubricating Oil Cup?

A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.

What is a Hose Saddle?

A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.

What is a Fueling Manifold?

A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.

What is a Bulkhead Hose Connector?

A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.

What is a Hose Elbow?

A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.

What is a Hose Coupling?

A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.

What is a Hose Mender?

A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.

What is a Fueling At Sea Breakable Spool?

A Fueling At Sea Breakable Spool (SPOOL,BREAKABLE,FUELING AT SEA) is a cast iron flanged spool, placed in a fueling hose line, having bolt slots for the easy detaching of bolts, and a machined groove around center of spool to permit easy breaking.

What is a Hose Expansion Ring?

A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.

A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.

A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.

What is a Pipe Elbow?

A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.

What is a Pipe To Hose Elbow?

A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Pipe To Tube Elbow?

A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube Elbow?

A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.

What is a Tube To Hose Elbow?

A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.

What is a Hose To Gas Fitting Straight Adapter?

A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.

What is a Pipe To Gas Fitting Straight Adapter?

A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.

What is a Pipe To Hose Straight Adapter?

A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.

What is a Pipe To Tube Straight Adapter?

A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.

What is a Tube To Hose Straight Adapter?

A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.

What is a Hose Bushing?

A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.

What is a Pipe Bushing?

A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.

What is a Tank Bushing?

A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.

What is a Hose Nipple?

A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Pipe Nipple?

A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.

What is a Tube Nipple?

A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.

What is a Tube Seal Bonnet?

A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.

What is a Pipe Union?

A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.

What is a Pipe To Hose Union?

A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.

What is a Pipe To Tube Union?

A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.

What is a Tube Union?

A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.

What is a Return Pipe Bend?

A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.

What is a Return Tube Bend?

A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.

What is a Soil Pipe Bend?

A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.

What is a Blind Pipe Flange?

A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.

What is a Soil Pipe Increaser?

A Soil Pipe Increaser (INCREASER,SOIL PIPE) is a straight fitting with the hub end larger than the spigot end. It is used to connect two pieces of soil pipe of different size.

What is a Soil Pipe Reducer?

A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.

What is a Pipe Flange?

A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).

What is a Swivel Retaining Pipe Flange?

A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).

What is a Machine Thread Plug?

A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.

What is a Pipe Lateral?

A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).

What is a Tube Lateral?

A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).

A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.

A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.

Hose, Pipe, Tube, Lubrication, and Railing Fittings

Federal Supply Class (FSC): 4730

NATO Supply Classification Class (NSC): 4730

Group Description: Pipe, Tubing, Hose, and Fittings

Federal Supply Group (FSG): 47

NATO Supply Classification Group (NSG): 47

Page 74 of 1363

NSN Format for Hose, Pipe, Tube, Lubrication, and Railing Fittings

47	30	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 4730 Hose, Pipe, Tube, Lubrication, and Railing Fittings

Includes Adapters; Bends; Caps; Clamps; Connectors; Couplings; Crosses; Elbows; Expansion Joints; Ferrules; Flanges; Laterals; Lubrication Fittings; Manifolds; Nipples; Nozzles; Outlets; Plugs; Reducers; Swing and Swivel Joints; Tees; Traps; Unions; Wyes.

Excludes Air Conditioning-Heating Fittings (FSC 4520); Bituminized Fiber and Concrete Fittings (FSC 5630); Conduit Boxes and Fittings (FSC 5975); Downspout Fittings (FSC 5670); Medical and Surgical Fittings (FSC 6515); Laboratory Fittings (FSC 6640); Post Caps and Rail Ends (FSC 5660); Machine Thread Bushings and Plugs (FSC 5365).

Additional Information for Hose, Pipe, Tube, Lubrication, and Railing Fittings

NATO Supply Class 4730 is a classification within NATO Supply Group 47, which is dedicated to Pipe, Tubing, Hose, and Fittings.

Specifically, NATO Supply Class 4730 focuses on Hose, Pipe, Tube, Lubrication, and Railing Fittings. This class includes various types of fittings that are used in the assembly and connection of hoses, pipes, and tubes. These fittings are designed to provide secure and leak-free connections, as well as to facilitate the flow of fluids or lubricants.

Examples of fittings that fall under NATO Supply Class 4730 include couplings, adapters, connectors, elbows, tees, valves, clamps, and other similar components. These fittings are used in a wide range of applications, including industrial, automotive, aerospace, and military sectors.

The purpose of NATO Supply Class 4730 is to provide a standardized classification system for these types of fittings, making it easier for NATO member countries to identify, procure, and exchange these items. This classification system helps ensure compatibility and interoperability among different military forces and organizations.

When searching for or procuring fittings within NATO Supply Class 4730, it is important to refer to the NATO Codification System (NCS) or consult relevant NATO supply catalogs and databases. These resources provide detailed information about the specific fittings, including their part numbers, technical specifications, and applicable standards.

Overall, NATO Supply Class 4730 plays a crucial role in the efficient management and supply of hose, pipe, tube, lubrication, and railing fittings within NATO member countries.

NSN by Country

US
United States
303627 Items

UK
United Kingdom
120870 Items

FR
France
92391 Items

DE
Germany
41842 Items

CA
Canada
31162 Items

IT
Italy
20584 Items

DK
Denmark
12750 Items

TR
Turkey
10364 Items

NL
Netherlands
8730 Items

AU
Australia
8196 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 4730

What is Federal Supply Class 4730?: FSC 4730 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 4730) in the USA for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
What is NATO Supply Classification Class 4730?: NSC 4730 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 4730 in the USA) for supply items codified in the category of Hose, Pipe, Tube, Lubrication, and Railing Fittings.
Which Federal Supply Group is FSC 4730 in?: FSC 4730 is in Federal Supply Group(FSG) 47 which contains .
Which NATO Supply Classification Group is NSC 4730 in?: NSC 4730 is in NATO Supply Classification Group(NSG) 47 which contains .

Supply Items Included in Federal Supply Class 4730

What is a Grease Cup? 441 Items: A Grease Cup (CUP,GREASE) is an item to be mounted on machinery, designed to hold grease and supply it to parts of machinery.
What is a Lubrication Fitting? 4710 Items: A Lubrication Fitting (FITTING,LUBRICATION) is a specifically designed item pressed or threaded into a lubrication passage, for the purpose of adapting a related coupler and/or grease gun, to dispense grease to a bearing, shaft and similar items.
What is a Lubricating Oil Cup? 302 Items: A Lubricating Oil Cup (CUP,OIL,LUBRICATING) is an item designed to be driven or threaded into a machine part for the purpose of dispensing oil to a lubricating passage or duct, and to seal the passage or duct against dirt and moisture. The item does not have a transparent body, or contain a wick or needle to restrict or filter the flow.
What is a Hose Saddle? 172 Items: A Hose Saddle (SADDLE,HOSE) is a hose rest to support a suspended hose line without kinking. It is made to the contour of the hose and provided with means for suspending from overhead.
What is a Fueling Manifold? 294 Items: A Fueling Manifold (MANIFOLD,FUELING) is a device having a single inlet and more than one outlet designed to accommodate more than one connection for the distribution of fuel from a central source. It may include additional equipment, such as valves, fittings, protective caps and/or plugs, and the like.
Nozzle,Garden Hose 87 Items
What is a Bulkhead Hose Connector? 2457 Items: A Bulkhead Hose Connector (CONNECTOR,HOSE,BULKHEAD) is a straight fitting having unthreaded male hose connections designed to join two sections of hose of the same size through a bulkhead or wall section.
What is a Hose Elbow? 2344 Items: A Hose Elbow (ELBOW,HOSE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. Each connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, PIPE TO HOSE; ELBOW, TUBE TO HOSE; and ELBOW, HOSE TO BOSS.
What is a Hose Coupling? 3086 Items: A Hose Coupling (COUPLING,HOSE) is a straight hose fitting designed to join a hose fitting or to a hose or another hose fitting. For connecting hose to hose fittings it must have two types of hose connections and one connection must have standard hose threads. For connecting two hose fittings it must have two types of hose connections that have standard hose threads of the same size on both ends, only one connection may be externally threaded. Excludes items with self-sealing and/or quick disconnect features.
What is a Hose Mender? 525 Items: A Hose Mender (MENDER,HOSE) is a hose fitting constructed of one or more pieces. It is used to join two rubber or plastic hoses; rubber or plastic tubes. The ends of the fitting may have barbed, corrugated, or threaded connections or combinations thereof.
What is a Fueling At Sea Breakable Spool? 20 Items: A Fueling At Sea Breakable Spool (SPOOL,BREAKABLE,FUELING AT SEA) is a cast iron flanged spool, placed in a fueling hose line, having bolt slots for the easy detaching of bolts, and a machined groove around center of spool to permit easy breaking.
What is a Hose Expansion Ring? 122 Items: A Hose Expansion Ring (RING,EXPANSION,HOSE) is a metallic, hollow, cylindrical item designed primarily to be inserted in the end of a hose and expanded to secure the hose to a coupling.
What is a Hose Cap? 503 Items: A Hose Cap (CAP,HOSE) is a hose fitting, usually internally threaded, designed to fit over or butt against another hose fitting for sealing. Excludes CAP, PIPE.
What is a Hose Plug? 506 Items: A Hose Plug (PLUG,HOSE) is a hose fitting with external hose threads designed to mate with another hose fitting for sealing.
What is a Pipe Elbow? 10981 Items: A Pipe Elbow (ELBOW,PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. Both connecting ends have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side or heel inlet(s). See also ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE. Excludes BEND, SOIL PIPE.
What is a Pipe To Hose Elbow? 1490 Items: A Pipe To Hose Elbow (ELBOW,PIPE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Pipe To Tube Elbow? 6305 Items: A Pipe To Tube Elbow (ELBOW,PIPE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE; ELBOW, TUBE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube Elbow? 16490 Items: A Tube Elbow (ELBOW,TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Hose Elbow? 2255 Items: A Tube To Hose Elbow (ELBOW,TUBE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube, The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; CONNECTOR, MULTIPLE, FLUID PRESSURE LINE; and ELBOW, SWIVEL FLANGE TO HOSE.
What is a Hose To Gas Fitting Straight Adapter? 327 Items: A Hose To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GAS FITTING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has any type or size of external and/or internal recognized National Gas Outlet Threads. It is designed to join a hose or hose fitting to a gas fitting in a straight line.
What is a Pipe To Gas Fitting Straight Adapter? 339 Items: A Pipe To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,PIPE TO GAS FITTING) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a pipe or pipe fitting to a gas fitting.
What is a Pipe To Hose Straight Adapter? 6036 Items: A Pipe To Hose Straight Adapter (ADAPTER,STRAIGHT,PIPE TO HOSE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a pipe or pipe fitting to a hose or hose fitting in a straight line.
What is a Pipe To Tube Straight Adapter? 18099 Items: A Pipe To Tube Straight Adapter (ADAPTER,STRAIGHT,PIPE TO TUBE) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a pipe or pipe fitting to a tube or tube fitting in a straight line.
What is a Tube To Hose Straight Adapter? 4588 Items: A Tube To Hose Straight Adapter (ADAPTER,STRAIGHT,TUBE TO HOSE) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a tube or tube fitting to a hose or hose fitting.
What is a Hose Bushing? 239 Items: A Hose Bushing (BUSHING,HOSE) is a fitting with standard hose threads having a female connection inside a male connection, used in conjunction with other fittings to connect in the same line two hoses of different sizes.
What is a Pipe Bushing? 3064 Items: A Pipe Bushing (BUSHING,PIPE) is a fitting with pipe threads having a female connection inside of a male connection, used in conjunction with another fitting, to connect in the same line, two pipes of different sizes.
What is a Tank Bushing? 55 Items: A Tank Bushing (BUSHING,TANK) is a double internal tapped bushing, recessed between the internal tappings, used to reduce threaded tank openings. They permit the passage of a foot valve, elbow, strainer, and the like through the tank opening, and then reduce the opening to suction pipe size. The internal tappings permit the connection of two pipes of the same size in a straight line.
What is a Hose Nipple? 1221 Items: A Hose Nipple (NIPPLE,HOSE) is a straight fitting used to join two internally threaded hose connections. It has hose connections at both ends externally threaded with the same size standard hose threads. The center section is lugged or suitably shaped to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Pipe Nipple? 8802 Items: A Pipe Nipple (NIPPLE,PIPE) is a straight one-piece metallic pipe 12 inches(304 MM)or less in length having external threads of the same size on both ends. It may have a center section which is externally shaped to accommodate a wrench. For pipe having internal threads 12 inches(304 MM)or less in length see coupling,pipe. For pipe in excess of 12 inches(304 MM)see pipe as modified.
What is a Tube Nipple? 8301 Items: A Tube Nipple (NIPPLE,TUBE) is a straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
What is a Tube Seal Bonnet? 341 Items: A Tube Seal Bonnet (SEAL BONNET,TUBE) is a metal tube fitting used with a coupling nut or sealing cap to cap the end of a fitting. It may include items with integral mounting features.
What is a Pipe Union? 3677 Items: A Pipe Union (UNION,PIPE) is a straight pipe fitting designed to join two lengths of pipe or pipe fittings in such a manner that they may be disconnected without disturbing the rest of the pipe line. The end connections have pipe threads or are unthreaded and designed to accommodate a pipe.
What is a Pipe To Hose Union? 226 Items: A Pipe To Hose Union (UNION,PIPE TO HOSE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to hose or hose fittings without disturbing the end connections or the rest of theline. It must have a pipe connection of any type or size on one end, and any type or size hose connection on the other end.The threaded hose connection must have standard hose threads, or must be an incomplete part of a threaded end connection that grips the hose directly.
What is a Pipe To Tube Union? 455 Items: A Pipe To Tube Union (UNION,PIPE TO TUBE) is a straight fitting capable of being taken apart and reassembled. It permits disconnection and connection of pipe or pipe fittings to tubing or tube fittings without disturbing the end connections or the rest of the line. It must have a pipe connection of any type or size on one end and a tube connection of any type or size on the other end.
What is a Tube Union? 3397 Items: A Tube Union (UNION,TUBE) is a straight tube fitting capable of being taken apart and reassembled. It permits disconnection and connection of tubing or tube fittings without disturbing the end connections or the rest of the line.
What is a Return Pipe Bend? 138 Items: A Return Pipe Bend (BEND,PIPE,RETURN) is a fitting designed to join a pipe in a parallel position to another pipe for reversing the flow of gas, steam, air, or liquids. Excludes BEND, SOIL PIPE.
What is a Return Tube Bend? 422 Items: A Return Tube Bend (BEND,TUBE,RETURN) is a fitting designed to join a tube in a parallel position to another tube for reversing the flow of gas, steam, air, or liquids.
What is a Soil Pipe Bend? 217 Items: A Soil Pipe Bend (BEND,SOIL PIPE) is a fitting used to connect two or more sections of soil pipe to form a turn. This includes bends with side or heel inlets.
What is a Blind Pipe Flange? 1370 Items: A Blind Pipe Flange (FLANGE,PIPE,BLIND) is an item used for covering or closing the end of a flanged pipe fitting. The face may be drilled for connecting bolts or studs. Excludes FLANGE, PIPE.
What is a Soil Pipe Increaser? 31 Items: A Soil Pipe Increaser (INCREASER,SOIL PIPE) is a straight fitting with the hub end larger than the spigot end. It is used to connect two pieces of soil pipe of different size.
What is a Soil Pipe Reducer? 82 Items: A Soil Pipe Reducer (REDUCER,SOIL PIPE) is a straight fitting with the spigot end larger than the hub end. It is used to connect two pieces of soil pipe of different size.
What is a Pipe Flange? 12136 Items: A Pipe Flange (FLANGE,PIPE) is an item solid or split into halves, having a threaded or unthreaded hole for the purpose of connecting or retaining a pipe, tube, or hose fitting. The face of the flange may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. If the item is unthreaded, the pipe or tube may be retained by welding, brazing, compression, or the like. Excludes FLANGE, PIPE, BLIND; FERRULE, GROOVED CLAMP COUPLING; and ADAPTER (as modified).
What is a Swivel Retaining Pipe Flange? 451 Items: A Swivel Retaining Pipe Flange (FLANGE,PIPE,SWIVEL RETAINING) is an item having an unthreaded hole with a recessed shoulder for the purpose of retaining a swivel type pipe, tube, or hose fitting. The face may be smooth, grooved, or serrated and may be drilled for connecting bolts or studs. Excludes ADAPTER (as modified).
What is a Machine Thread Plug? 427 Items: A Machine Thread Plug (PLUG,MACHINE THREAD) is an item with a cylindrical shaped body having external threads other than pipe or hose series. It is desinged to mate into a preformed threaded component for the purpose of plugging a hole during equipment operation. It may have a head and/or internal drive and may contain a bleeder hole. See also PLUG, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL. Excludes PLUG, TUBE FITTING, THREADED.
What is a Pipe Lateral? 255 Items: A Pipe Lateral (LATERAL,PIPE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit pipes and/or pipe fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Tube Lateral? 247 Items: A Tube Lateral (LATERAL,TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5705 radians) to the run to permit tubes or tube fittings to be taken off laterally from the main line. It may have side inlet(s).
What is a Hose Tee? 1183 Items: A Hose Tee (TEE,HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of hose or hose fitting.
What is a Pipe Tee? 8648 Items: A Pipe Tee (TEE,PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have standard pipe threads or 1s unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fittings.
What is a Pipe To Hose Tee? 186 Items: A Pipe To Hose Tee (TEE,PIPE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a hose or hose fitting.
What is a Pipe To Tube Tee? 2598 Items: A Pipe To Tube Tee (TEE,PIPE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Pipe To Tube To Hose Tee? 53 Items: A Pipe To Tube To Hose Tee (TEE,PIPE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of pipe or pipe fitting, tube or tube fitting, and hose or hose fitting.
What is a Tube Tee? 14890 Items: A Tube Tee (TEE,TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or are unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a tube or tube fitting.
What is a Tube To Hose Tee? 219 Items: A Tube To Hose Tee (TEE,TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of the tube or tube fitting and a hose or hose fitting.
What is a Soil Pipe Lateral? 115 Items: A Soil Pipe Lateral (LATERAL,SOIL PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees to the run. If item has two branches, they will be located on opposite sides of the run (180 degrees apart) and will be identical. It may have side inlets.
What is a Soil Pipe Tee? 126 Items: A Soil Pipe Tee (TEE,SOIL PIPE) is a fitting consisting of a run and a branch. The branch may be either curved or straight, but the axis of the end connection intersects the axis of the run at right angles. It may have side inlets.
What is a Tube Coupling Inverted Nut? 1299 Items: A Tube Coupling Inverted Nut (INVERTED NUT,TUBE COUPLING) is an externally threaded fastening device which has an internal or external seat, designed to mate with the seat of an internally threaded tube fitting for the purpose of securing the tube to the fitting to form a leakproof connection.
What is a Hose Coupling Nut? 435 Items: A Hose Coupling Nut (NUT,HOSE COUPLING) is a cylindrical item which serves as the outer shell of a multipiece end connection designed to directly grip the end of a hose.
What is a Tube Coupling Nut? 5399 Items: A Tube Coupling Nut (NUT,TUBE COUPLING) is an internally threaded nut which has either an internal seat or shoulder and/or is designed to be used with a ferrule, to mate with the seat of an externally threaded tube fitting to form a leakproof connection. Excludes NUT (1), TUBE COUPLING, REDUCING; and NUT (1), UNION.
What is a Reducing Tube Coupling Nut? 211 Items: A Reducing Tube Coupling Nut (NUT,TUBE COUPLING,REDUCING) is a tube coupling nut with the shank end accommodating a smaller tube size than is accommodated by the tube fitting which connects to the threaded end.
What is an Union Tailpiece? 1680 Items: An Union Tailpiece (TAILPIECE,UNION) is a fitting used with a union nut and thread piece to form a union.
What is an Union Thread Piece? 911 Items: An Union Thread Piece (THREAD PIECE,UNION) is a fitting used with a union nut and a tailpiece to form a union.
What is a Pipe Exhaust Head? 56 Items: A Pipe Exhaust Head (EXHAUST HEAD,PIPE) is a metal device open to the atmosphere located on the outside of a building and connected to the end of a pipeline carrying waste steam, for the purpose of muffling the sound and removing entrained oil and condensation.
What is a Pipe Swing Joint? 121 Items: A Pipe Swing Joint (SWING JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane.
What is a Pipe To Tube Swing Joint? 42 Items: A Pipe To Tube Swing Joint (SWING JOINT,PIPE TO TUBE) is a metallic connector usually angular in shape. It is designed to join a length of tube and/or tube fitting to a length of pipe and/or pipe fitting in a fluid line to permit turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Tube Swing Joint? 144 Items: A Tube Swing Joint (SWING JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit swinging or turning at one or more joints. Each joint permits turning on its axis on one plane. It may incorporate bearing(s) to facilitate swinging action after installation.
What is a Pipe Swivel Joint? 481 Items: A Pipe Swivel Joint (SWIVEL JOINT,PIPE) is a metallic connector designed to join two lengths of pipe and/or pipe fittings in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
Expansion Joint,Pipe 2647 Items
What is a Sediment Strainer? 6098 Items: A Sediment Strainer (STRAINER,SEDIMENT) is a strainer having inlet and outlet connections and designed to be connected in a pipe, tube or hose line.
Hose Connection Assembly,Air,Salvage 87 Items
What is a Hose Coupling Assembly? 724 Items: A Hose Coupling Assembly (COUPLING ASSEMBLY,HOSE) is an item consisting of two or more hose fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect hose lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Steam Trap? 737 Items: A Steam Trap (TRAP,STEAM) is a device for allowing the passage of condensate, or of air and condensate, and for preventing the passage of steam.
What is a Pipeline Separator? 118 Items: A Pipeline Separator (SEPARATOR,PIPELINE) is a mechanical device used in a piping system carrying steam, air, or other vapor. It is designed to remove particles of condensed vapor or oil by means of baffles. If automatic draining, see TRAP, MOISTURE.
What is a Steam Gage Siphon? 18 Items: A Steam Gage Siphon (SIPHON,STEAM GAGE) is a threaded device which acts as a trap to prevent live steam from coming in contact with the working mechanism of a steam pressure gage.
Clamp,Pipe,Anchor And Reinforcement 900 Items
What is a Pipe Repair Clamp? 401 Items: A Pipe Repair Clamp (CLAMP,REPAIR,PIPE) is a one-piece or two-piece metal clamp generally used with gasket(s) and designed to repair longitudinal splits and pit holes and/or to support thin walls in a straight run of pipe. See also CLAMP, LEAK REPAIR, PIPE COUPLING.
What is a Pipe Cap? 1493 Items: A Pipe Cap (CAP,PIPE) is a pipe fitting primarily designed for permanent installation during piping system operation to fit over or butt against a pipe or pipe fitting for sealing. Excludes FLANGE, PIPE, BLIND.
What is a Tube Cap? 2873 Items: A Tube Cap (CAP,TUBE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit over or butt against a tube or fitting for sealing. See also CAP, PROTECTIVE, DUST AND MOISTURE SEAL and CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Drainage Pipe Coupling? 114 Items: A Drainage Pipe Coupling (COUPLING,DRAINAGE PIPE) is a straight fitting having an internally threaded or unthreaded connection of the same size on both ends. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV)tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting in a drainage line. Excludes COUPLING, PIPE.
What is a Pipe Coupling? 5951 Items: A Pipe Coupling (COUPLING,PIPE) is a straight fitting 12 inches (304 mm) long or under having the same or different type pipe connection of the same size on both ends. It is designed to join a pipe or pipe fitting to another pipe or pipe fitting. Excludes fittings with threaded external connections on both ends. See also NIPPLE, PIPE.
What is a Pipe Plug? 9402 Items: A Pipe Plug (PLUG,PIPE) is a pipe fitting primarily designed for permanent installation during piping systems operations to fit into another pipe or pipe fitting for sealing. It usually is threaded.
What is a Tube Coupling? 7980 Items: A Tube Coupling (COUPLING,TUBE) is a straight fitting 12 inches (304 mm) long or under having the same or different type of connection of the same size on both ends. It is designed to join a tube or tube fitting to another tube or tube fitting. Excludes fittings with threaded external connections on both ends. Excludes NIPPLE, PIPE.
What is a Water Closet Spud? 55 Items: A Water Closet Spud (SPUD,WATER CLOSET) is a short coupling of nonferrous metal flanged at one end and with iron pipe threads extending from the other end to the base of the flange. It is generally used to join a water closet bowl to the flushing water supply and is usually supplied with locknut and washer.
Splicing Set,Hose 39 Items
What is an Air Eductor? 137 Items: An Air Eductor (EDUCTOR,AIR) is a hollow, tapered, metallic tube attached to a base. The base has an inlet for the attachment of a hose (compressed air or steam). The operation of the unit is dependent on the air or steam pressure to produce a venturi effect and increase the volume of free air to be circulated.
What is a Blank Pipe Lateral? 10 Items: A Blank Pipe Lateral (LATERAL,PIPE,BLANK) is a solid forged unfinished type of pipe fitting having provisions for machining to a three connection socket welding fitting, two of which are on the run and with a branch which is fixed at various angles, other than 90 degrees to the run, permitting pipes and/or fittings to be taken off laterally from the main line.
What is a Hose Reducer? 659 Items: A Hose Reducer (REDUCER,HOSE) is a straight hose fitting having a different size connection on each end. It is designed to join two hoses of different sizes. Excludes BUSHING (as modified).
What is a Pipe Reducer? 6865 Items: A Pipe Reducer (REDUCER,PIPE) is a straight pipe fitting having a different size connection on each end. It is designed to join two pipes of different sizes or two pipe fittings of different sizes. Excludes BUSHING (as modified).
What is a Tube Reducer? 10018 Items: A Tube Reducer (REDUCER,TUBE) is a straight tube fitting having a different size connection on each end. It is designed to join two tubes of different sizes. Excludes BUSHING (as modified).
What is a Drain Extension Tube? 98 Items: A Drain Extension Tube (TUBE,EXTENSION,DRAIN) is a fabricated tubular product, extruded on one end, used for lengthening waste or flush tubing from plumbing fixtures.
What is a Hose Cross? 42 Items: A Hose Cross (CROSS,HOSE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or are unthreaded and designed to accomodate a hose. It is designed to be used as a junction at the intersection of hose and/or hose fittings. It may have side inlet(s).
What is a Pipe Cross? 555 Items: A Pipe Cross (CROSS,PIPE) is a fitting having four branches in the same plane whose axes form right angles. The connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is designed to be used as a junction at the intersection of pipe and/or pipe fittings.
What is a Pipe To Tube Cross? 128 Items: A Pipe To Tube Cross (CROSS,PIPE TO TUBE) is a fitting having four branches in the same plane whose axes form right angles. One or more of the connections have standard pipe threads or are unthreaded and designed to accommodate a pipe. The remaining connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It may have side inlet(s).
What is a Tube Cross? 1327 Items: A Tube Cross (CROSS,TUBE) is a fitting having four branches in the same plane whose axes form right angles. The connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It is designed to be used as a junction at the intersection of tubing and/or tube fittings. It may have side inlet(s).
What is a Faucet Flange? 34 Items: A Faucet Flange (FLANGE,FAUCET) is a flanged fitting with a centrally located hole, designed to be attached over the supply end of a faucet by means of threads or set screw, for the purpose of covering supply openings in sanitary fixtures. Excludes FLANGE, PIPE.
What is a Water Closet Bend Collar? 14 Items: A Water Closet Bend Collar (COLLAR,WATER CLOSET BEND) is a soil pipe fitting, used as a floor flange for connecting a water closet fixture to a water closet bend.
What is a Pipeline Air Drier And Cooler? 92 Items: A Pipeline Air Drier And Cooler (AIR DRIER AND COOLER,PIPELINE) is a unit designed to be connected into an air line to remove particles of condensed vapor, oil, and sediment and to cool the air. It is composed of an expeller, aftercooler, and drain trap, and operates by means of baffles.
What is a Can Filling Pipe And Hose Assembly? 25 Items: A Can Filling Pipe And Hose Assembly (PIPE AND HOSE ASSEMBLY,CAN FILLING) is an item consisting of two pipes joined together with a pressure and a flow control valve. One pipe is a main line section designed to be connected into a supply line, the other pipe is a side line, with hoses having nozzles for dispensing liquid into containers.
What is a Pipe-Tube Escutcheon? 101 Items: A Pipe-Tube Escutcheon (ESCUTCHEON,PIPE-TUBE) is a shield, usually circular in shape, having a centrally located hole. It is designed to conceal the excess portion of a wall, ceiling or floor opening around a pipe or tube or a pipe or tube fitting such as a shower bath valve. The item is never threaded, Excludes FLANGE, FAUCET.
What is a Spool Piece? 413 Items: A Spool Piece is a straight cut length of pipe fabricated with drilled and faced flanges on each end. It may have steel lifting rings or ears welded longitudinally to the pipe and is generally used for submerged pipeline, fuel loading line, and the like.
What is a Slip Joint Nut? 205 Items: A Slip Joint Nut (NUT,SLIP JOINT) is a nut having one female threaded iron pipe size opening and one reduced size nonthreaded opening. It is specifically designed for connecting a nonthreaded end of thin wall tubing to a male threaded pipe or pipe fitting using a compression method consisting of a friction ring and a rubber washer or other equivalent packing. Excludes compression and packing nuts.
What is a Water Closet Bend? 19 Items: A Water Closet Bend (BEND,WATER CLOSET) is a waste line fitting designed for use with a water closet, to provide a means of connecting a water closet bowl to a waste line.
What is a Pipe Locknut? 373 Items: A Pipe Locknut (LOCKNUT,PIPE) is a hexagonal or octagonal nut containing internal straight pipe threads. It has flat faces, one of which contains a packing recess. See also LOCKNUT, ELECTRICAL CONDUIT; LOCKNUT, TUBE FITTING; and SEAL NUT, PIPE.
What is a Tube Repair Plug? 280 Items: A Tube Repair Plug (PLUG,TUBE REPAIR) is a tapered item designed to plug temporarily, the end of a leaking boiler tube(s), condenser tube(s), and the like. Excludes PLUG, TUBE REPAIR, EXPANDING. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Drainage Pipe Tee? 53 Items: A Drainage Pipe Tee (TEE,DRAINAGE PIPE) is a fitting having three connections with the branch connection equidistant and fixed at 90 degrees (1.5705 radians) to the run. It is provided with an internal shoulder(s) at the end(s) of its internally threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow of the pipe and/or pipe fitting contents. It may have side inlet(s).
What is a Drainage Pipe Three Way Elbow? 32 Items: A Drainage Pipe Three Way Elbow (ELBOW,THREE WAY,DRAINAGE PIPE) is a fitting having rounded ends where it joins two sections of pipe in a straight line to direct the flow from these ends acting as inlet(s) to the end at right angles. It has an internal shoulder(s) at the end(s) of its internally threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow of the pipe and/or pipe fitting contents. It may have side and/or heel inlet(s). It is designed to connect two sections of pipe in a straight line to a third section at right angles.
What is a Drainage Pipe Lateral? 189 Items: A Drainage Pipe Lateral (LATERAL,DRAINAGE PIPE) is a fitting having one or two branches which are fixed at various angles other than 90 degrees (1.5705 radians) to the run. It is used as a junction at the intersection of a drainage line and is provided with a shoulder(s) at the end(s) of its internal threaded or unthreaded portion, conforming to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and provide a smooth flow to the contents of the line. It may have side inlet(s).
What is a Drainage Pipe Tee-Y? 211 Items: A Drainage Pipe Tee-Y (TEE-Y,DRAINAGE PIPE) is a fitting having one or two branches whose internal and/or external portions form a sweep or radius to the run with the connections fixed at 90 degrees (1.5705 radians) to the run. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipe and/or pipe fitting is close to the shoulder to eliminate a pocket and to provide a smooth flow ofthe pipe and/or pipe fitting contents. It may have side inlet(s).
What is a Valve Service Box? 28 Items: A Valve Service Box (SERVICE BOX,VALVE) is a sectional metal pipe whose lower or base section is enlarged to cover an underground valve. The primary purpose is to provide an open shaft which will allow the insertion of the service box valve key.
What is a Hose Clamp? 18621 Items: A Hose Clamp (CLAMP,HOSE) is a clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. Its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. It is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. For square, rectangular, or irregularly shaped items, see CLAMP, HOSE, SPECIAL-SHAPED. Excludes CLAMP, ELECTRICAL; CLAMP, LOOP; CLAMP, FIRE HOSE, SHUTOFF; FERRULE (as modified); and HAND SCREW.
What is an Inflating Air Chuck? 167 Items: An Inflating Air Chuck (CHUCK,AIR,INFLATING) is an air hose fitting with a check valve, designed for adapting the discharge end of the hose to the mouth of the valve stems on inner tubes, pneumatic bags, tanks, and the like.
What is a Lubricating Fitting Set? 45 Items: A Lubricating Fitting Set is a collection of various types and sizes of grease type lubrication fittings issued as a set.
What is a Fuel Feeder Manifold? 269 Items: A Fuel Feeder Manifold (MANIFOLD,FUEL FEEDER) is a pipelike item with one or two threaded pipe end inlets and one or more outlets which may be threaded for pipe connections.
What is a Soil Pipe Ferrule With Plug? 22 Items: A Soil Pipe Ferrule With Plug (FERRULE WITH PLUG,SOIL PIPE) is an item used in the hubs of soil pipe traps or fittings for sealing and to permit clean out when plug is removed.
What is a Soil Pipe Plug? 32 Items: A Soil Pipe Plug (PLUG,SOIL PIPE) is a fitting designed to fit into the hub end of soil pipe or a soil pipe fitting for sealing.
What is a Pipe Clamp Coupling? 850 Items: A Pipe Clamp Coupling (COUPLING,CLAMP,PIPE) is a device of two or more bolted segments of housing and a gasket, designed to connect grooved or plain end pipe or tube (or fittings) and which creates a fluid tight joint.
What is a Rapid Action Coupled Pipe Cap? 38 Items: A Rapid Action Coupled Pipe Cap (CAP,PIPE,RAPID ACTION COUPLED) is a steel cap designed with a clamping lever type female connection to fit over the male end of a rapid action coupled pipe or fitting.
What is a Protective Lubrication Fitting Cap? 104 Items: A Protective Lubrication Fitting Cap (CAP,LUBRICATION FITTING,PROTECTIVE) is a lubrication fitting designed to fit over another lubrication fitting to prevent the entrance of foreign matter into passageway of the fitting and to protect the fitting from external damage. Excludes CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is an Air Line Manifold? 695 Items: An Air Line Manifold (MANIFOLD,AIR LINE) is an item having threaded inlet(s) and two or more threaded outlets used for air distribution.Excludes automotive air brake manifolds, valves, restrictors, filters, and like devices.Excludes MANIFOLD ASSEMBLY, AIR DRIVE.
What is a Tube Fitting Locknut? 570 Items: A Tube Fitting Locknut (LOCKNUT,TUBE FITTING) is an item with internal machine threads designed to fit the external machine threads of a tube fitting. It has flat faces, one of which has a counterbored recess to accommodate packing, packing or sealing ring(s), gasket(s), and the like. The item, when installed, provides a method of locking and sealing the connection. See also LOCKNUT, PIPE; NUT (1), TUBE COUPLING and NUT (1), PLAIN, HEXAGON.
What is a Soil Pipe Trap? 43 Items: A Soil Pipe Trap (TRAP,SOIL PIPE) is a device having hub and/or spigot ends. It is used in drain of soil systems to prevent sewer gas from backing up beyond desired point by forming a water seal in the line. This is accomplished by its peculiar shape which is usually in the form of a letter P or S. It may have side inlet and/or cleanout.
What is a Pipeline Flexible Spacer? 2358 Items: A Pipeline Flexible Spacer (SPACER,FLEXIBLE,PIPELINE) is an item made from rubber in various shapes, flanged on each end, and having a centrally located hole of the same size as the piping with which used. It is designed to be inserted between sections of pipe or pipe and casing of fans, pumps, or the like, to absorb shock, dampen vibration and to facilitate removal of section(s) for repair or other purposes.
What is a Tank Nipple? 40 Items: A Tank Nipple (NIPPLE,TANK) is a short length of pipe with standard taper pipe threads on one end. The other end has a standard taper pipe thread running into a recognized standard locknut thread. It is usually fitted with locknut and faced coupling. Excludes NIPPLE (1), PIPE.
What is an Adapter Bushing? 1536 Items: An Adapter Bushing is an item having wrenching facilities on one end and a threaded connection of one type within an externally threaded connection of another type. One connection must have machine threads not designed for any type of tube or tube fitting.
What is a Tube Fitting Brazing Ferrule? 1734 Items: A Tube Fitting Brazing Ferrule (FERRULE,BRAZING,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and brazed in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Tube Fitting Clinch Sleeve? 1299 Items: A Tube Fitting Clinch Sleeve (SLEEVE,CLINCH,TUBE FITTING) is a flanged cylindrical item having a sharp cutting surface on the inside diameter at the end opposite the flange. The cutting edge, in use, is designed to imbed in the tubing due to pressure exerted when the outside diameter of the sleeve is forced into and against an angular seat. This firmly attaches the sleeve to the tubing and the flanged end then serves as a bearing surface for the coupling nut to bring the tubing into the mating fitting.
What is a Tube-Hose Fitting Compression Sleeve? 2298 Items: A Tube-Hose Fitting Compression Sleeve (SLEEVE,COMPRESSION,TUBE-HOSE FITTING) is a ring-shaped item whose outer surface is so shaped as to form a seat for the coupling nut and the fitting between which it is assembled. It is designed to be slipped over tubing or hose so that tightening of the coupling nut to the fitting compresses the sleeve against the circumference of the tubing or hose thereby effecting a tight seal between the tubing, or hose fitting and coupling nut.
What is a Tube Fitting Flared Sleeve? 879 Items: A Tube Fitting Flared Sleeve (SLEEVE,FLARED,TUBE FITTING) is a flanged cylindrical metallic item designed to be used on tubing to back up the flared end and to provide a bearing surface for the coupling nut, thereby reducing wear on the tubing flare. The inside diameter of the flanged end is countersunk to form a seat for the flare when assembled to a mating fitting.
What is a Packing Nut? 2764 Items: A Packing Nut is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. See also BUSHING, MACHINE THREAD; INVERTED NUT, TUBE COUPLING; and NUT, TUBE COUPLING. Excludes PACKING NUT, STUFFING TUBE; and use with electrical cable, and LOCKNUT, PIPE.
What is a Pipe Coupling Leak Repair Clamp? 53 Items: A Pipe Coupling Leak Repair Clamp (CLAMP,LEAK REPAIR,PIPE COUPLING) is an item designed to provide leakproof flexible housing, by longitudinal compression, for a leaking pipe coupling. Excludes CLAMP, REPAIR, PIPE.
What is a Water Well Strainer? 102 Items: A Water Well Strainer (STRAINER,WELL,WATER) is a tubular item designed to remove solid particles from the water passing through it and to be used in water wells and the like. The particle removing section may be constructed of a continuous winding of wire around the outside bars securely mounted on end couplings, perforated pipe, or perforated pipe covered with fabricated brass or wire mesh jackets. Excludes STRAINER, SUCTION.
What is a Pipe Elbow Assembly? 339 Items: A Pipe Elbow Assembly (ELBOW ASSEMBLY,PIPE) is an item consisting of a long radius pipe elbow with a pipe flange welded to one end. The other end has a lapped, stud end nipple butt-welded thereto on which is mounted a loose, slip-on pipe flange lapped to mate with a lapped nipple. The loose flange facilitates the alignment of the make-up bolt holes. It may have side and/or heel inlet(s).
What is a Drainage Pipe Trap? 125 Items: A Drainage Pipe Trap (TRAP,DRAINAGE PIPE) is a device designed to be connected to a drainage system to prevent sewer gas from backing up beyond a desired point by forming a water seal in the line. This is accomplished by its peculiar shape, which is usually in the form of the letter P and S. It is provided with an internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (DWV) tube. When connected, the mating pipes make up close to the shoulders to eliminate pockets and provide a smooth flow of pipe and/or pipe fitting contents. Excludes TRAP, DRAIN, PLUMBING FIXTURE; and TRAP, SOIL PIPE.
What is a Fluid Flow Restrictor? 5987 Items: A Fluid Flow Restrictor (RESTRICTOR,FLUID FLOW) is an item of solid one-piece construction, designed to restrict the flow of a fluid through it. It has an orifice of a smaller size than the diameter of flow into it. Excludes items such as VALVE (1), (as modified); and others with an adjustable orifice. Excludes pipe, tube, or hose fittings with restricted passages and items designed to test fluid flow. For items containing screens or filters, see RESTRICTOR UNIT, FLUID FLOW.
What is a Self-Sealing Coupling Assembly? 562 Items: A Self-Sealing Coupling Assembly (COUPLING ASSEMBLY,SELF-SEALING) is a multipiece fluid line fitting consisting of two COUPLING HALF, SELF-SEALING fittings.
What is a Swivel Flange To Hose Connector? 285 Items: A Swivel Flange To Hose Connector (CONNECTOR,SWIVEL FLANGE TO HOSE) is a straight fitting having a swivel flange connection on one end. It is designed to permit axial rotation of the fitting, usually for ease of installation, prior to securing it to a flange or mounting pad. The other end has a hose connection that grips the hose directly, either externally, internally, or both.
What is a Self-Sealing Coupling Half? 1256 Items: A Self-Sealing Coupling Half (COUPLING HALF,SELF-SEALING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. The fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. For self-sealing fittings with a quick disconnect end, see COUPLING HALF, QUICK DISCONNECT. For fluid line fittings without a self-sealing feature, see COUPLING (as modified).
Fitting Kit,Tube-Pipe 653 Items
What is a Pipe Fitting Assortment? 142 Items: A Pipe Fitting Assortment is a collection of two or more sizes and/or types of pipe fittings grouped together in a single tray, package, or storage bin. Individual sizes/types are sometimes sorted in separate compartments within a single bin. It may include close and very short pipe nipples, for individual repeated replacement and/or general use.
What is a Drainage Pipe Elbow? 234 Items: A Drainage Pipe Elbow (ELBOW,DRAINAGE PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It is provided with internal shoulder(s) at the end(s) of its internal threaded or unthreaded portion, whose inside diameter conforms to standard weight wrought iron pipe or copper drainage, waste and vent (dwv) tube. When connected, the mating pipes are close to the shoulders to eliminate pockets and provide a smooth flow of the pipe and/or fitting contents. It is designed to join two sections of pipe and/or pipe fittings. It may include side or heel inlet(s). Excludes BEND, SOIL PIPE; and ELBOW, RAILING.
What is a Water Distribution Nozzle? 317 Items: A Water Distribution Nozzle (NOZZLE,DISTRIBUTION,WATER) is an item, the discharge end of which is fitted with a hood, designed to be fitted on a water line to distribute the water uniformly over the surface of a tank or settling basin or uniformly drain a tank or settling basin.
What is a Pipe True Wye? 321 Items: A Pipe True Wye (WYE,TRUE,PIPE) is a fitting in the form of the letter Y with each branch usually fixed at 45 degrees (0.78539 radians) to the run. It has identical flanged ends.
What is an Air Trap? 228 Items: An Air Trap (TRAP,AIR) is a device used to automatically vent air from water or vent gas from any liquid in a pipeline or closed vessel. See also TRAP, MOISTURE.
What is a Moisture Trap? 423 Items: A Moisture Trap (TRAP,MOISTURE) is a device designed to operate in a compressed air or gas system, to accumulate moisture and automatically discharge it from the system.
What is a Swivel Flange To Hose Bend? 12 Items: A Swivel Flange To Hose Bend (BEND,SWIVEL FLANGE TO HOSE) is a fitting having a bend of 180 degrees (3.141 radians) or greater. One connecting end has a flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other connection end is designed to grip the hose directly, either externally, internally, or both.
What is a Swivel Flange To Hose Elbow? 297 Items: A Swivel Flange To Hose Elbow (ELBOW,SWIVEL FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One end connection must have a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end connection is designed to grip the hose directly, either externally, internally, or both. It includes items designed to accommodate a swivel flange.
What is a Sediment Strainer Element? 9171 Items: A Sediment Strainer Element (STRAINER ELEMENT,SEDIMENT) is a replaceable device designed to remove solid particles from flowing liquids. The removal of particles is accomplished by porous material (metallic or non-metallic), wire mesh, perforated metal, or the like, constructed so the liquid can flow through the device while the solid particles are retained. It is designed to fit into a STRAINER, SEDIMENT (or similar cavity). It may have a reinforcement to prevent collapsing, distorting or rupturing. The degree of particles removed must be nominally rated at 50 microns, or more, or absolutely rated at 75 microns, or more. See also FILTER ELEMENT, FLUID.
What is a Quick Disconnect Coupling Half? 16212 Items: A Quick Disconnect Coupling Half (COUPLING HALF,QUICK DISCONNECT) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must have an internal or external quick disconnect feature for connecting a mating part to form a quick disconnect coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half. For self-sealing fittings with an external or internal threaded disconnect end, see COUPLING HALF, SELF-SEALING. See also, CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Fluid Pressure Line Multiple Connector? 7337 Items: A Fluid Pressure Line Multiple Connector (CONNECTOR,MULTIPLE,FLUID PRESSURE LINE) is a device of varying shapes with two or more connections to accommodate hydraulic or air passage(s) line end connections and/or a BOLT, FLUID PASSAGE(S).
What is a Fluid Passage Bolt? 8221 Items: A Fluid Passage Bolt (BOLT,FLUID PASSAGE) is a boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.
What is an Emergency Damage Control Pipe Repair Kit? 27 Items: An Emergency Damage Control Pipe Repair Kit (REPAIR KIT,PIPE,EMERGENCY DAMAGE CONTROL) is an assembly of expendable and nonexpendable material and equipment such as fibrous glass cloth, mat(s), tape, rubber gloves, goggles, resin, and the like for making emergency repairs to piping systems.
Parts Kit,Self-Sealing Coupling Half 23 Items
What is a Sediment Strainer Body? 640 Items: A Sediment Strainer Body (STRAINER BODY,SEDIMENT) is a component of a STRAINER, SEDIMENT designed to contain a STRAINER ELEMENT, SEDIMENT. It may have inlet and/or outlet connections, means for mounting, or a drain plug(s) or cock(s). Excludes BOWL, SEDIMENT. See also FILTER BODY, FLUID.
What is a Solder Type Tube Fitting Plug? 130 Items: A Solder Type Tube Fitting Plug (PLUG,TUBE FITTING,SOLDER TYPE) is a tube fitting primarily designed for permanent installation during tubing system operation to fit into another tube fitting for sealing. It has a solid end with a shoulder which butts against end of fitting.
What is an Union Nut? 3419 Items: An Union Nut (NUT,UNION) is an internally threaded nut which has an internal seat or shoulder designed to engage the nut retaining flange of a union tailpiece. The threaded portion is used to engage the thread piece of a union, union elbor or the like. Excludes NUT (1), TUBE COUPLING.
What is a Lubricant Pressure Relief Fitting? 130 Items: A Lubricant Pressure Relief Fitting (FITTING,LUBRICANT PRESSURE RELIEF) is a spring loaded device designed to relieve excessive oil and grease pressure from gear box housings and such items as bearings, kingpins and universal joints. Excludes FITTING, LUBRICATION.
What is a Quick Disconnect Coupling Assembly? 1805 Items: A Quick Disconnect Coupling Assembly (COUPLING ASSEMBLY,QUICK DISCONNECT) is a multipiece fluid line fitting consisting of two COUPLING HALF, QUICK DISCONNECT fittings.
What is a Radiator Filling Faucet? 17 Items: A Radiator Filling Faucet (FAUCET,RADIATOR FILLING) is a lever operated item with a long rigid spout bent to form an approximate right angle, used for filling automotive radiators and the like. It has a female threaded inlet for connection to a water hose.
What is a Magnetic Plug Assortment? 32 Items: A Magnetic Plug Assortment (PLUG ASSORTMENT,MAGNETIC) is an assortment of PLUG, MACHINE THREAD, MAGNETIC and/or PLUG, PIPE, MAGNETIC of various types and/or sizes.
What is a Fluid Flow Restrictor Unit? 1043 Items: A Fluid Flow Restrictor Unit (RESTRICTOR UNIT,FLUID FLOW) is an assembly consisting of an orifice in a fixed plate, disk, or tube with screens or filters on one or both sides, depending on the direction of filtered flow. See RESTRICTOR, FLUID FLOW.
What is a Slip Joint Pipe Coupling? 94 Items: A Slip Joint Pipe Coupling (COUPLING,PIPE,SLIP JOINT) is a straight fitting having external threads on both ends. Each end is equipped with an internally threaded nut having an unthreaded reduced size opening which contains a gasket and other necessary parts. It is designed to join an unthreaded pipe to another unthreaded pipe in a straight line. It forms a tight fluid seal by the compression slip joint method. It may have a pipe stop.
What is an Air Hose Connector? 358 Items: An Air Hose Connector (CONNECTOR,AIR HOSE) is a straight fitting having generally a serrated shank on one end for air hose connection. The other end is designed to be connected to the valve stem on an inner tube, pneumatic bag, or the like. Excludes items with pipe threads. For items with a check valve see CHUCK, AIR, INFLATING.
Nozzle,Sand Blast 162 Items
What is an Expanding Tube Repair Plug? 34 Items: An Expanding Tube Repair Plug (PLUG,TUBE REPAIR,EXPANDING) is a sleeve shaped item having a hole through its center and equipped with a machine screw, washer, and nut. Designed to be placed in the end of a tube, sealing the tube by turning the screw causing the sleeve to expand against the walls of the tube and in turn expanding the tube. For tapered tube repair plugs, see PLUG, TUBE REPAIR. See also CAP-PLUG, RADIATOR TESTING and PLUG, RADIATOR TEST.
What is a Magnetic Machine Thread Plug? 33 Items: A Magnetic Machine Thread Plug (PLUG,MACHINE THREAD,MAGNETIC) is a threaded machine thread plug with integral magnet in the body usually used in lubricating or hydraulic systems.
What is a Magnetic Pipe Plug? 378 Items: A Magnetic Pipe Plug (PLUG,PIPE,MAGNETIC) is a pipe fitting primarily designed for installation in a lubrication or hydraulic system. It has an integral magnet in the body and external pipe threads.
What is a Sediment Strainer Head? 34 Items: A Sediment Strainer Head (HEAD,SEDIMENT STRAINER) is a component of a sediment strainer designed to contain the inlet and/or outlet ports of the strainer. It acts as a cover and attaches to the BOWL, SEDIMENT or mounts directly to an integral cavity in an engine, manifold, casing, or the like. The item may include relief, check, and/or by-pass valves, means for supporting the strainer element, and means for mounting the strainer. The item does not include a strainer element. Excludes HEAD, FLUID FILTER.
What is a Hose To Boss Straight Adapter? 2546 Items: A Hose To Boss Straight Adapter (ADAPTER,STRAIGHT,HOSE TO BOSS) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, HOSE and CONNECTOR, HOSE, BULKHEAD. Excludes items having flanged ends.
What is a Pipe To Boss Straight Adapter? 2247 Items: A Pipe To Boss Straight Adapter (ADAPTER,STRAIGHT,PIPE TO BOSS) is an adapter having standard pipe threads on one end or an unthreaded end designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a pipe or pipe fitting to a boss or boss fitting in a straight line on items such as tanks, housing, valve fittings, or the like. See also ADAPTER BUSHING and COUPLING, PIPE.
What is a Tube To Boss Straight Adapter? 22196 Items: A Tube To Boss Straight Adapter (ADAPTER,STRAIGHT,TUBE TO BOSS) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a tube or tube fitting to a boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like. See also COUPLING, TUBE and NIPPLE, TUBE.
What is a Boss Elbow? 822 Items: A Boss Elbow (ELBOW,BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. The boss connections have external and/or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to join two bosses or boss fittings on items such as tanks, housings, valve fittings, and the like. Excludes ELBOW, TUBE.
What is a Hose To Boss Elbow? 849 Items: A Hose To Boss Elbow (ELBOW,HOSE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end must have either standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The other connecting end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join a hose or hose fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. It may have side and/or heel inlet(s). See also ELBOW, HOSE; and ELBOW, TUBE TO HOSE. Excludes ELBOW, PIPE TO HOSE and items having flange ends.
What is a Pipe To Boss Elbow? 490 Items: A Pipe To Boss Elbow (ELBOW,PIPE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The other end has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a pipe or pipe fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like. See also ELBOW, PIPE; and ELBOW, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Tube To Boss Elbow? 3583 Items: A Tube To Boss Elbow (ELBOW,TUBE TO BOSS) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Boss Tee? 449 Items: A Boss Tee (TEE,BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have external or internal machine threads (straight threads other than pipe or hose series), and are designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. Excludes TEE, TUBE.
What is a Hose To Boss Tee? 123 Items: A Hose To Boss Tee (TEE,HOSE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The hose connection(s) have standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a hose or hose fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, and the like. See also TEE, HOSE and TEE, TUBE TO HOSE. Excludes TEE, PIPE TO HOSE.
What is a Pipe To Boss Tee? 87 Items: A Pipe To Boss Tee (TEE,PIPE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a pipe or pipe fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Tube To Boss Tee? 2386 Items: A Tube To Boss Tee (TEE,TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a tube or fitting and a boss or boss fitting on items such as a tank, housing, valve fitting, or the like. See also TEE, TUBE; and TEE, PIPE TO TUBE. Excludes CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
What is a Boss Cross? 72 Items: A Boss Cross (CROSS,BOSS) is a fitting having four branches in the same plane whose axes form right angles. The boss connections for items such as tanks, housings, valve fittings, and the like, have internal or external machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It may have side inlet(s). Excludes CROSS, TUBE.
What is a Boss Reducer? 1468 Items: A Boss Reducer (REDUCER,BOSS) is a straight fitting having a boss connection of a different size at each end. Both connections have external or internal machine threads (straight threads other than pipe or hose series) and are designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. Excludes BUSHING (as modified).
What is a Pipe Seal Nut? 167 Items: A Pipe Seal Nut (SEAL NUT,PIPE) is a hexagonal nut containing internal tapered pipe threads. It has raised undetachable sealing member on the face of the bearing surface. The item, when installed, provides a method of sealing the connection at the boss or mating surface. It does not provide any method for locking at the connection. See LOCKNUT, PIPE.
What is a Boss Nipple? 725 Items: A Boss Nipple (NIPPLE,BOSS) is a straight, one-piece fitting used to join two bosses or boss fittings. Both ends are the same size and have external machine threads (straignt threads other than pipe or hose series). It is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. The center section may be suitably shaped to accommodate a wrench.
What is a Boss Coupling? 598 Items: A Boss Coupling (COUPLING,BOSS) is a straight one-piece fitting 12 inches (304 mm) long or under having the same size fitting on each end (straight machine threads other than pipe or hose series). It may have internal threads on both ends or internal threads on one end and external threads on the other designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is designed to join two bosses or boss fittings. Excludes items having external threaded connections on both ends.
What is a Pipe Outlet? 283 Items: A Pipe Outlet (OUTLET,PIPE) is a fitting having one end connection designed to accommodate a pipe. The other end is designed to be attached to a flat surface or the external contour of a pipe, tube, or fitting by welding, brazing, soldering, or the like. It is used to fabricate pipe outlets in a piping or tubing line.
What is a Tube Outlet? 949 Items: A Tube Outlet (OUTLET,TUBE) is a fitting having one end connection designed to accommodate tubing. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe or fitting by welding, brazing, soldering, or the like. It is used to fabricate tube outlets in a pipe or tubing line.
What is a Threaded Tube Fitting Plug? 1487 Items: A Threaded Tube Fitting Plug (PLUG,TUBE FITTING,THREADED) is a tube fitting with external threads other than pipe or hose series having an internal or external seating surface. The seating surface is designed to form a seal when mated with other tube fittings to retain fluids under pressure during equipment operation. For items without a specific seating surface which are designed to utilize a gasket or packing under the head for forming a seal, see PLUG, MACHINE THREAD.
What is a Flange To Boss Straight Adapter? 397 Items: A Flange To Boss Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO BOSS) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It is designed to join a flange or flange fitting to boss or boss fitting in a straight line on items such as tanks, housings, valve fittings, and the like.
What is a Flange To Hose Straight Adapter? 998 Items: A Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO HOSE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line.
What is a Flange To Pipe Straight Adapter? 680 Items: A Flange To Pipe Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO PIPE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It is designed to join a flange or flange fitting to a pipe or pipe fitting in a straight line.
What is a Flange To Tube Straight Adapter? 1572 Items: A Flange To Tube Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO TUBE) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It is designed to join a flange or flange fitting to a tube or tube fitting in a straight line.
What is a Swivel Flange To Hose Straight Adapter? 255 Items: A Swivel Flange To Hose Straight Adapter (ADAPTER,STRAIGHT,SWIVEL FLANGE TO HOSE) is an adapter having a swivel flange connection on one end designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end is designed to grip the hose directly, either externally, internally, or both. It is designed to join a flange or flange fitting to a hose or hose fitting in a straight line. It includes items designed to accommodate a swivel flange.
What is a Flange Cross? 28 Items: A Flange Cross (CROSS,FLANGE) is a fitting having four branches in the same plane whose axes form right angles. The connections have a flange designed to connect with another flange connection or a compression type mounting pad. It may include side inlet(s).
What is a Flange To Tube Cross? 18 Items: A Flange To Tube Cross (CROSS,FLANGE TO TUBE) is a fitting having four branches in the same plane whose axes form right angles. One or more of the connections have a flange designed to connect with another flange connection or a compression type mounting pad. The remaining connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. It may have side inlet(s).
What is a Flange Elbow? 892 Items: A Flange Elbow (ELBOW,FLANGE) is a fitting that forms an angle of less than 180 degrees (3.142 radians) from the straight flow. It has flange connections on both ends designed to connect with another flange connection, or a compression type mounting pad. It may have side and/or heel inlet(s).
What is a Flange To Boss Elbow? 237 Items: A Flange To Boss Elbow (ELBOW,FLANGE TO BOSS) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has external and/or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side and/or heel inlet(s).
What is a Flange To Hose Elbow? 841 Items: A Flange To Hose Elbow (ELBOW,FLANGE TO HOSE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed toaccommodate a hose. It may have side and/or heel inlet(s).
What is a Flange To Pipe Elbow? 484 Items: A Flange To Pipe Elbow (ELBOW,FLANGE TO PIPE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has standard pipe threads or is unthreaded and designed to accommodate a pipe. It may have side and/or heel inlet(s).
What is a Flange To Tube Elbow? 1464 Items: A Flange To Tube Elbow (ELBOW,FLANGE TO TUBE) is a fitting that forms an angle of less that 180 degrees (3.141 radians) from the straight flow. It has a flange connection on one end designed to connect with another flange connection, or a compression type mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side and/or heel inlet(s).
What is a Swivel Flange To Tube Elbow? 176 Items: A Swivel Flange To Tube Elbow (ELBOW,SWIVEL FLANGE TO TUBE) is a fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has a swivel flange designed to permit axial rotation of the fitting, usually for the ease of installation, prior to securing it to a flange or mounting pad. The other end has machine threads (straight threads other than pipe or hose series) designed to accommodate a swivel flange. It may have side and/or heel inlets.
What is a Flange Tee? 291 Items: A Flange Tee (TEE,FLANGE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The connections have flanges designed to connect with another flange or to a compression type mounting pad. It may have side inlet(s).
What is a Flange To Boss Tee? 35 Items: A Flange To Boss Tee (TEE,FLANGE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5708 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression mounting pad. The boss connection(s) has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
What is a Flange To Hose Tee? 42 Items: A Flange To Hose Tee (TEE,FLANGE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The hose connection(s) has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a hose or hose fitting.
What is a Flange To Pipe Tee? 69 Items: A Flange To Pipe Tee (TEE,FLANGE TO PIPE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The pipe connection(s) has standard pipe threads or is unthreaded and designed to accommodate a pipe. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a pipe or pipe fitting.
What is a Flange To Tube Tee? 144 Items: A Flange To Tube Tee (TEE,FLANGE TO TUBE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection(s) is designed to connect with another flange connection or a compression type mounting pad. The tube connection(s) has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting and a tube or tube fitting.
What is a Flange To Tube To Hose Tee? 14 Items: A Flange To Tube To Hose Tee (TEE,FLANGE TO TUBE TO HOSE) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection is designed to connect with another flange connection or a compression type mounting pad. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The hose connection has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting, tube or tube fitting, and hose or hose fitting.
What is a Soil Pipe Coupling? 53 Items: A Soil Pipe Coupling (COUPLING,SOIL PIPE) is a straight fitting used to connect two pieces of soil pipe of the same size.
What is a Quick Disconnect Cap? 677 Items: A Quick Disconnect Cap (CAP,QUICK DISCONNECT) is a fluid line fitting having an internal quick disconnect feature, designed to fit over a fitting with an external quick disconnect feature, to block the flow of fluid.
What is a Quick Disconnect Elbow? 156 Items: A Quick Disconnect Elbow (ELBOW,QUICK DISCONNECT) is a fluid line fitting shaped to form an angle of less than 180 degrees (3.142 radians) from straight flow. Both ends must have a quick disconnect feature. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from a mating quick disconnect feature. For elbow type fluid line fittings with a quick disconnect feature on one end and a pipe, tube or boss connection on the other end, see COUPLING HALF, QUICK DISCONNECT.
What is a Quick Disconnect Plug? 824 Items: A Quick Disconnect Plug (PLUG,QUICK DISCONNECT) is a fluid line fitting having an external quick disconnect feature, designed to be inserted into a fitting with an internal quick disconnect feature to block the flow of fluid. Excludes PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Quick Disconnect Reducer? 217 Items: A Quick Disconnect Reducer (REDUCER,QUICK DISCONNECT) is a straight fluid line fitting having a different size quick disconnect feature on each end, designed to couple mating quick disconnect features. Both ends may have external quick disconnect features.
What is a Quick Disconnect Wye? 174 Items: A Quick Disconnect Wye (WYE,QUICK DISCONNECT) is a fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
What is a Pipe Flange Safety Shield? 83 Items: A Pipe Flange Safety Shield (SHIELD,SAFETY,PIPE FLANGE) is an item specifically designed to fit around a pipe flange joint to confine high pressure spray from a flanged joint leak and prevents uncontrolled spray of fluids that could result in injury to personnel and damage to equipment and materials.
What is a Suction Strainer? 827 Items: A Suction Strainer (STRAINER,SUCTION) is a strainer having only one connection and designed to be attached to the intake end of a hose, tube or pipe line. Includes fire hose strainers. Excludes STRAINER, WELL, WATER.
What is a Tube Coupling Swage Ferrule? 441 Items: A Tube Coupling Swage Ferrule (FERRULE,SWAGE,TUBE COUPLING) is a flanged cylindrical metallic item used with a plain end tube and swaged in place. It is designed to be used as a component part of a flexible or rigid tube coupling.
What is a Tube Fitting Insert? 582 Items: A Tube Fitting Insert (INSERT,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be inserted into soft plastic tubing to accommodate the sleeve of compression type tube fittings.
What is a Pipe To Tube To Boss Tee? 29 Items: A Pipe To Tube To Boss Tee (TEE,PIPE TO TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The pipe connection has standard pipe threads, or is unthreaded and designed to accommodate a pipe. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube, or is unthreaded and designed to accommodate a tube. The boss connection has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It is used as a junction at the intersection of pipe or pipe fitting and a tube or tube fitting.
What is a Tube To Gas Fitting Straight Adapter? 406 Items: A Tube To Gas Fitting Straight Adapter (ADAPTER,STRAIGHT,TUBE TO GAS FITTING) is an adapter having machine threads (straight threads other than pipe or hose series) designed to accommodate a tube on one end or an unthreaded end designed to accommodate a tube. The other end has external and/or internal recognized National Gas Outlet Threads. It is designed to join a tube fitting to a gas fitting.
What is a Fluid-Emulsion Spray Nozzle? 1578 Items: A Fluid-Emulsion Spray Nozzle (NOZZLE,SPRAY,FLUID-EMULSION) is an item designed to be attached to the discharge lines of a sprayer or a discharge pipe for the application of liquid detergents, waxes, acids and other solvent compounds in pressure cleaning, asphalt and light tar emulsions in concrete processes, and/or liquid insecticides, fungicides, fertilizers, growth inhibitors and other chemicals in agricultural applications. It is a one-piece or multi-piece construction and may include a strainer and/or check valve.
What is a Flange To Tube To Boss Tee? 16 Items: A Flange To Tube To Boss Tee (TEE,FLANGE TO TUBE TO BOSS) is a fitting having three connections with the branch connection fixed at 90 degrees (1.5705 radians) to the run. The flange connection is designed to connect with another flange connection or a compression type mounting pad. The tube connection has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube fitting or is unthreaded and designed to accommodate a tube. The boss connection has external or internal machine threads (straight threads other than pipe or hose series), and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side inlet(s). It is used as a junction at the intersection of a flange or flange fitting, tube or tube fitting, and boss or boss fitting.
What is a Tube-Hose Adapter Body? 363 Items: A Tube-Hose Adapter Body (ADAPTER BODY,TUBE-HOSE) is an incomplete fitting which, when installed is designed to join together in a straight line a tube and/or tube fitting to a hose and/or hose fitting. The item may have a complete connection on one end; the other end always requires an additional nut and/or sleeve to make a complete end connection.
What is a Flexible Tube Coupling Assembly? 616 Items: A Flexible Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE,FLEXIBLE) is a multipiece gasket sealed item specifically designed for joining plain end ferruled tubing or beaded end tubing that will accommodate angular misalignment, axial motion and permits expansion and contraction of the tubing. It may be disconnected for seal replacement without disturbing the rest of the line. The seals are not normally furnished with the item. For rigid type items see COUPLING, TUBE; and UNION, TUBE.
What is a Tube Coupling Body? 370 Items: A Tube Coupling Body (COUPLING BODY,TUBE) is an incomplete fitting which, when installed is designed to join together in a straight line two tubes and/or tube fittings of the same size. The item may have a complete connection on one end; the other end always requires an additional nut, sleeve, ferrule or the like to make a complete end connection.
What is a Tube Coupling Nut Assembly? 282 Items: A Tube Coupling Nut Assembly (NUT ASSEMBLY,TUBE COUPLING) is an item consisting of an internally threaded nut and an integral floating washer designed to be used with a gasket seal to connect beaded or swaged ferruled thin wall tubing to a coupling body, boss connection, or the like to form a flexible or rigid leakproof connection.
What is a Flared Tube Fitting Conical Seal? 376 Items: A Flared Tube Fitting Conical Seal (SEAL,CONICAL,FLARED TUBE FITTING) is a cylindrical soft metallic crush item used to seal high pressure flared tube connections. It is designed to be inserted between the conical surface of a flared tube fitting and the inner surface of the flared end of the connecting tube.
What is a Quick-Disconnect Nipple? 489 Items: A Quick-Disconnect Nipple (NIPPLE,QUICK-DISCONNECT) is a fluid line fitting having external quick-disconnect features of the same size on both ends, designed to couple mating internal quick-disconnect fittings.
What is a Sediment Bowl? 110 Items: A Sediment Bowl (BOWL,SEDIMENT) is a removable concave vessel designed as a component part of a carburetor, cam-actuated fuel pump, sediment strainer, water separator, and the like for collecting the sediment from a fluid. The item may have a pressure relief valve, drain plug, or drain valve. Excludes: Bowl (as modified); FILTER BODY, FLUID; AND STRAINER BODY, SEDIMENT.
What is a Sound Isolation Insert Set? 44 Items: A Sound Isolation Insert Set (INSERT SET,SOUND ISOLATION) is a multipiece item consisting of a nonmetallic positioning insert, thrust insert with a bonded washer and a metallic backup washer. It is specifically designed for use in a piping system sound isolation coupling flexible connector for the purpose of isolating sound.
What is a Sound Isolation Coupling Assembly? 22 Items: A Sound Isolation Coupling Assembly (COUPLING ASSEMBLY,SOUND ISOLATION) is a multipiece item specifically designed for use in a piping system to form a flexible, sound proof pipe joint. It has a flange connection on one end designed to connect with another flange connection. The other has a flange pad designed to accommodate a companion flange.
What is a Tube To Boss Cross? 65 Items: A Tube To Boss Cross (CROSS,TUBE TO BOSS) is a fitting having four branches in the same plane whose axes form right angles. One or more of the connections have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or are unthreaded and designed to accommodate a tube. The remaining connections are boss connections. The boss connections have internal or external machine threads and are designed to facilitate a gasket, preformed packing, washer, and the like to form a seal at the boss. It may have side inlet(s).
What is a Quick Disconnect Coupling Assembly Parts Kit? 94 Items: A Quick Disconnect Coupling Assembly Parts Kit (PARTS KIT,QUICK DISCONNECT COUPLING ASSEMBLY) is a parts kit used for replacing the worn and/or damaged parts used in a COUPLING ASSEMBLY, QUICK DISCONNECT. It may include such items as springs, snap rings, o-rings, bearings, and the like.
Parts Kit,Sediment Strainer 46 Items
Parts Kit,Self-Sealing Coupling Assembly 39 Items
Parts Kit,Steam Trap 142 Items
Parts Kit,Swivel Joint 68 Items
What is a Boss Outlet? 398 Items: A Boss Outlet (OUTLET,BOSS) is a fitting having one end connection designed to accommodate a boss. The other end is designed to be attached to a flat surface or the external contour of a tube, pipe, or fitting by welding, brazing, soldering, or the like. It is used to fabricate boss outlets in a pipe or tubing line.
What is a Return Flange Bend? 11 Items: A Return Flange Bend (BEND,FLANGE,RETURN) is a fitting designed to join a flange in a parallel position to another flange for reversing the flow of gas, steam, air, or liquids. Excludes BEND, PIPE, RETURN.
What is a Pipeline Adapter? 163 Items: A Pipeline Adapter (ADAPTER,PIPELINE) is an item of various shapes and sizes, used for connecting pipelines and/or hoselines to water supply and fire brigade installations and intermediate pressure reducing components.
What is a Boss Bushing? 240 Items: A Boss Bushing (BUSHING,BOSS) is a straight fitting with internal and external straight threads other than pipe or hose with wrenching facility. Designed to facilitate a gasket, preformed packing, washer or the like to form a seat at the boss. Excludes REDUCER, BOSS and BUSHING, MACHINE THREAD.
What is a Split Flange Parts Kit? 101 Items: A Split Flange Parts Kit (PARTS KIT,SPLIT FLANGE) is a parts kit used to install and/or repair a FLANGE, PIPE (as modified). It may contain such items as flange halfs, bolts, washers, "o" rings and the like.
What is an Exhaust-Intake Pneumatic Muffler? 198 Items: An Exhaust-Intake Pneumatic Muffler (PNEUMATIC MUFFLER,EXHAUST-INTAKE) is a noise control/filtering device of various sizes, shapes, designs, materials (metallic/non-metallic) and varied mounting configurations used to diffuse air blasts, lowers air velocity, reduce noise, filtration of airborne moisture and/or dust contamination, pressure equalization, speed control for air operated devices. For vehicular application see MUFFLER, (as modified).
What is a Hose To Grooved Clamp Coupling Straight Adapter? 137 Items: A Hose To Grooved Clamp Coupling Straight Adapter (ADAPTER,STRAIGHT,HOSE TO GROOVED CLAMP COUPLING) is an adapter having standard hose threads on one end, an incomplete part of a threaded end connection that grips the hose directly, or an unthreaded end designed to accommodate a hose. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Flange To Flange Straight Adapter? 313 Items: A Flange To Flange Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO FLANGE) is a straight one-piece fitting with flange connections on both ends. It is designed to join flange end fitting to different size flange connections in a straight line.
What is a Grooved Clamp Connecting Coupling Half? 95 Items: A Grooved Clamp Connecting Coupling Half (COUPLING HALF,GROOVED CLAMP CONNECTING) is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a BOLT, FLUID PASSAGE on one end. The other end must be designed to accommodate a COUPLING, CLAMP, GROOVED for connecting a mating part to form a clamped coupling assembly. The fitting may incorporate a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half.
What is a Branched Tubing Connector? 244 Items: A Branched Tubing Connector (CONNECTOR,TUBING,BRANCHED) is a metallic/nonmetallic item of either a T or Y shape used in making three way connections with metallic/nonmetallic tubing.
What is a Hose Clamp Kit? 86 Items: A Hose Clamp Kit (CLAMP KIT,HOSE) is it consists of a roll of a specially perforated band that can be cut to a required length and an adjustable fastener that interlocks to make any diameter required.
Connector,Tubing,Straight 926 Items
What is a Hydraulic Manifold Assembly? 1656 Items: A Hydraulic Manifold Assembly (MANIFOLD ASSEMBLY,HYDRAULIC) is a hydraulic system component designed to distribute fluids between components such as accumulators, restrictors, valves, filters and the like. It includes some or all of the above components.
What is a Clamp Kit Fastener? 47 Items: A Clamp Kit Fastener (FASTENER,CLAMP KIT) is an adjustable two end attachable item with housing and screw on one end and serrations on the other end. Used with CLAMP (1), KIT.
What is a Hose Fitting Swaging Socket? 113 Items: A Hose Fitting Swaging Socket (SWAGING SOCKET,HOSE FITTING) is a circular item designed to be compressed around a mating piece such as a nipple assembly to form a high compression seal. Excludes SWAGING SLEEVE, WIRE ROPE.
What is a Tube Swivel Joint? 205 Items: A Tube Swivel Joint (SWIVEL JOINT,TUBE) is a metallic connector designed to join two lengths of tube and/or tube fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Quick Disconnect Coupling Assembly Set? 127 Items: A Quick Disconnect Coupling Assembly Set (COUPLING ASSEMBLY SET,QUICK DISCONNECT) is an item consisting of two or more COUPLING ASSEMBLY QUICK DISCONNECT. May include dust caps.
What is a Hose Repair Kit? 79 Items: A Hose Repair Kit (REPAIR KIT,HOSE) is a collection of items which may include MENDER, HOSE; CLAMP (1), HOSE; CLAMP, PLIER; CLAMP (1), SCREW QUICK ADJUSTING; HOSE ADAPTERS; CLAMP PINCERS and the like. It is used for temporary or permanent repair of a hose(s) connection.
What is an Assortment Hose Clamp? 24 Items: An Assortment Hose Clamp (CLAMP,HOSE,ASSORTMENT) is a grouping of various size CLAMP (1), HOSE, often categorize in individual compartment of a storage bin. Excludes CLAMP KIT, (as modified).
Nozzle,Dry Honing 15 Items
Adapter,Check Valve 135 Items
Connector,Suction Pump 49 Items
Handle,Weldment,Double Swivel 22 Items
Tube Connector Assembly,Flowmeter 82 Items
Bung Adapter,Drum 16 Items
Nipple,Special 500 Items
Nozzle,Line Blind 36 Items
Cap,Retention,Pressure Plug 174 Items
What is an Inseparable Chain Lube Fitting? 10 Items: An Inseparable Chain Lube Fitting (FITTING,CHAIN LUBE,INSEPARABLE) is an item designed to provide lubrication to a drive chain located within a mechanical housing. The body of the fitting is inserted through the housing and is mounted to it by a flange or similar means.
Connector,Pneumatic Starter Duct 14 Items
Adapter Assembly,Filler Cap 163 Items
Steam Trap Element 42 Items
Adapter Assembly,Valve 319 Items
Adapter,Air Shift Chamber Hose 22 Items
Adapter And Flange Assembly 462 Items
Socket Assembly,Hose Flange 105 Items
What is a Tube Coupling Assembly? 851 Items: A Tube Coupling Assembly (COUPLING ASSEMBLY,TUBE) is an item consisting of two or more tube fittings which are complete items and may be assembled in a combination forming a single item of supply designed to connect tube lines. Excludes COUPLING ASSEMBLY, SELF-SEALING and COUPLING ASSEMBLY, QUICK DISCONNECT.
What is a Vaporizing Nozzle? 204 Items: A Vaporizing Nozzle (NOZZLE,VAPORIZING) is a device designed to be attached to the end of a fire hose connection to convert discharge solution into vapor and direct in specified discharge patterns.
What is a Hose Connector Sleeve? 242 Items: A Hose Connector Sleeve (SLEEVE,HOSE CONNECTOR) is a threadless metallic item with center wrenching facility designed to be slipped over soft tubing and shank connector to form a tight fitting.
What is a Hose-Tube Flange Lateral? 25 Items: A Hose-Tube Flange Lateral (LATERAL,FLANGE,HOSE-TUBE) is a fitting having three connections with the branch connection fixed at various angles other than 90 degrees (1.5708 radians) to the rim to permit hose and/or hose fittings, tube and/or tube fittings to be removed laterally from the main lines.
What is a Tube Fitting Socket Welded Ferrule? 168 Items: A Tube Fitting Socket Welded Ferrule (FERRULE,SOCKET WELDED,TUBE FITTING) is a flanged cylindrical metallic item designed to be slipped over tubing and welded in place. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled the joint seals at the seat in a manner similar to a seat type union.
What is a Quick Disconnect Flanged Tee Assembly? 79 Items: A Quick Disconnect Flanged Tee Assembly (TEE ASSEMBLY,FLANGED,QUICK DISCONNECT) is an item having connections with the connections fixed at 90 degrees (1.5708 radians), to the run. The connections are designed to connect with coupling haft, cam-locking type, male/female. The side inlet may or may not be reducer fitting.
What is a Flange To Grooved Clamp Straight Adapter? 57 Items: A Flange To Grooved Clamp Straight Adapter (ADAPTER,STRAIGHT,FLANGE TO GROOVED CLAMP) is an adapter having a flange connection on one end designed to connect with another flange connection or a compression type mounting pad. The other end is designed to mate with a COUPLING, CLAMP, GROOVED. It is designed to join a hose or hose fitting to a COUPLING HALF, GROOVED CLAMP CONNECTING in a straight line.
What is a Special-Shaped Hose Clamp? 596 Items: A Special-Shaped Hose Clamp (CLAMP,HOSE,SPECIAL-SHAPED) is a clamp in which the body (band or wire) completely surrounds the item and exerts an evenly distributed pressure on its periphery. It is specifically designed to prevent leakage between a hose and its attaching connections when the body of the clamp is square, rectangular, or irregularly shaped. For items with round or circular bodies, see CLAMP (1) , HOSE.
What is a Pipe To Boss Swivel Joint? 16 Items: A Pipe To Boss Swivel Joint (SWIVEL JOINT,PIPE TO BOSS) is a metallic connector designed to join a length of pipe and/or pipe fitting to a boss and/or boss fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Tube To Boss Swivel Joint? 125 Items: A Tube To Boss Swivel Joint (SWIVEL JOINT,TUBE TO BOSS) is a metallic connector designed to join lengths of tube and/or tube fittings to a length of boss and/or boss fittings in a fluid line to permit turning on its axis on one plane and to allow for angular movement.
What is a Pipe To Tube Swivel Joint? 74 Items: A Pipe To Tube Swivel Joint (SWIVEL JOINT,PIPE TO TUBE) is a metallic connector designed to join a length of pipe and/or pipe fitting to a length of tube and/or tube fitting in a pipeline to permit turning on its axis on one plane and to allow for angular movement.
What is a Tube Fitting Compression Ferrule? 227 Items: A Tube Fitting Compression Ferrule (FERRULE,COMPRESSION,TUBE FITTING) is a flanged cylindrical metallic or nonmetallic item designed to be slipped over tubing. The rear face of the flange forms a bearing surface for the coupling nut, and the front face is of a contour designed to seat against a mating contour on a fitting. When assembled, the joint seals at the seat in a manner similar to a seat type union.
What is a Pipe Fitting Flared Collar? 116 Items: A Pipe Fitting Flared Collar (COLLAR,FLARED,PIPE FITTING) is a cylindrical metallic item for use with piping, designed to back up the flared end and provide a bearing surface for the nut or outer sleeve of a pipe coupling. See SLEEVE, FLARED (as modified).
What is a Non-Metallic Connecting Sleeve? 810 Items: A Non-Metallic Connecting Sleeve (SLEEVE,CONNECTING,NON-METALLIC) is a cylindrical shaped item of solid or laminated non-metallic materials. IT is designed to connect ducts, piping and the like when some degree of flexibility is required, and is usually secured at the ends by clamps. May be convaluated or straight and may have preformed ends. For items cut from bulk hose see HOSE (as modified). Excludes SLEEVE, SEAL, COUPLER.
What is a Lubrication Fitting Adapter? 291 Items: A Lubrication Fitting Adapter (ADAPTER,FITTING,LUBRICATION) is an item specifically designed to be pressed or threaded into a lubrication passage for the purpose of making accessable a FITTING, LUBRICATION which is otherwise inaccessable.
What is a Fluid Orifice Plate? 727 Items: A Fluid Orifice Plate (PLATE,ORIFICE,FLUID) is an item that restricts the flow of fluid by means of a pattern of holes.
What is a Pipe Reinforcement Saddle? 17 Items: A Pipe Reinforcement Saddle (SADDLE,REINFORCEMENT,PIPE) is a T-shaped item designed to be used as a mechanical reinforcement of welded right angle pipe junctions. It may partially or fully encircle the header (main run pipe). A vent hole may be provided to prevent pressure build-up.
What is a Coupling Retainer? 186 Items: A Coupling Retainer (RETAINER,COUPLING) is a rigid or flexible item of various shapes designed to fasten two tubes together and also allow for expansion and contraction of the tubes.
What is a Distilling Nozzle Assembly? 22 Items: A Distilling Nozzle Assembly (NOZZLE ASSEMBLY,DISTILLING) is a combination of items used to requlate water flow in a distiller. It may include items such as pipe, tubing, spray nozzles, flange blind and the like.
What is a Pipeline Flexible Connection? 115 Items: A Pipeline Flexible Connection (CONNECTION,FLEXIBLE,PIPELINE) is a metallic fitting, with a rubber insert for flexibility and sound isolation. It usually has a flange on one end, and a pipe or pipe coupling on the other end. It may have a filter or filter element assembly.
What is a Fluid Strainer Cover? 81 Items: A Fluid Strainer Cover (COVER,FLUID STRAINER) is an item of various shapes designed as a component of a STRAINER, SEDIMENT, acting as the cover and retaining the strainer element in place. The item does not have an inlet or outlet connection. It is fastened onto the STRAINER BODY, SEDIMENT by means of bolts, clamps, or threaded. For items with inlet and/or outlet connections, see HEAD, FILTER FLUID.
What is a Tube Coupling Nut Ring? 81 Items: A Tube Coupling Nut Ring (RING,NUT,TUBE COUPLING) is a semirigid metal item of round cross section and predetermined length, designed to be inserted into an internal groove of a NUT,TUBE COUPLING. It is used to position and retain the tube within the nut. Excludes RING,RETAINING.
What is a Hydraulic Swivel Joint? 1312 Items: A Hydraulic Swivel Joint (SWIVEL JOINT,HYDRAULIC) is a mechanical fluid passage joint designed for linkage of rigid hydraulic lines and components subject to pivotal, linear, or rotational position changes. The device allows two-directional flow of high pressure fluid and permits single plane rotation upon its axis. It may also allow for angular movement. Excludes SWIVEL JOINT, PIPE; and SWIVEL JOINT, TUBE.
What is a Hydraulic System Accessories Manifold? 2299 Items: A Hydraulic System Accessories Manifold (MANIFOLD,HYDRAULIC SYSTEM ACCESSORIES) is a hydraulic system component with three or more openings designed to distribute fluids between components such as accumulators, restrictors, valves, filters, and the like. Does not include components to which the fluid is distributed.
What is a Tube Reducer Body? 385 Items: A Tube Reducer Body (REDUCER BODY,TUBE) is an incomplete fitting which upon installation is designed to join together in a straight line two tubing lines and/or fittings of different sizes. The item consists of the body which has a complete end connection on one end; the other end is designed to mate with a tube or tube fitting but requires an additional nut and/or sleeve to make a complete end connection.
What is a Quick Disconnect Coupling Half Dog? 23 Items: A Quick Disconnect Coupling Half Dog (DOG,QUICK DISCONNECT COUPLING HALF) is an item used in conjunction with similar items to form a locking mechanism in a quick disconnect coupling half for locking the adapter (nipple) to the nozzle (socket) of a quick disconnect coupling assembly.
What is a Water Feeder Manifold? 44 Items: A Water Feeder Manifold (MANIFOLD,WATER FEEDER) is a pipe like item with end inlet and several pipe outlets including valves, fittings, adapters, braces, and the like. It also includes removable feed mounted on each manifold end.
What is a Hose Fitting Tank Valve Coupling Assembly? 42 Items: A Hose Fitting Tank Valve Coupling Assembly (COUPLING ASSEMBLY,TANK VALVE,HOSE FITTING) is an item having adaptor to tank valve at one end and two or more interchangeable end connections which mate with different hose fitting types. It is used to drain dispensing tanks.
What is an Inflatable Pipe Plug? 63 Items: An Inflatable Pipe Plug (PLUG,PIPE,INFLATABLE) is a flexible item designed to be temporarily or permanently installed in a pipe. When inflated it allows the pipe or pipe portion to be isolated quickly. It may be expanded to be used in serveral pipe section values and/or have a by-pass as to make air and/or water leaktight testing.
What is a Pipeline Flexible Spacer Fire Protective Cover? 10 Items: A Pipeline Flexible Spacer Fire Protective Cover (COVER,FIRE PROTECTIVE,PIPELINE FLEXIBLE SPACER) is a flexible item designed to surround and protect a SPACER, FLEXIBLE, PIPELINE from fire and heat.

Stock Items From Supply Class 4730 Page 74of 1363

4730-01-569-6676
Tube Reducer

015696676
IZR1.5T: RNCC: 3 | RNVC: 2
41835200: RNCC: 5 | RNVC: 2

5 Dec 2008

4730-01-569-4644
Electrical Special Purpose Cable Assembly

015694644
40006392-000: RNCC: 3 | RNVC: 2
40006392+000: RNCC: 5 | RNVC: 2

3 Dec 2008

4730-01-569-4138
Shorting Plug

015694138
8111530-00: RNCC: 3 | RNVC: 2

2 Dec 2008

4730-01-569-3951
Quick Disconnect Coupling Half

015693951
AA59326/6B-5-A: RNCC: 2 | RNVC: 2
3LX13: RNCC: 5 | RNVC: 1

1 Dec 2008

4730-01-569-3996
Tube To Boss Elbow

015693996
16A2404-25: RNCC: 3 | RNVC: 2

1 Dec 2008

4730-01-569-2733
Tube Coupling Nut

015692733
AS18280: RNCC: 3 | RNVC: 1
MS21921V8PANDMS21922-8: RNCC: 3 | RNVC: 2

25 Nov 2008

4730-01-569-2162
Tube Coupling Nut

015692162
SAE J514: RNCC: 3 | RNVC: 1
16 070110S: RNCC: 3 | RNVC: 2

24 Nov 2008

4730-01-569-0064
Hose Clamp

015690064
MPA43002-300: RNCC: 3 | RNVC: 1
VR1051-300: RNCC: 3 | RNVC: 2

17 Nov 2008

4730-01-569-0063
Hose Clamp

015690063
MPA43024-300: RNCC: 3 | RNVC: 1
VR1049-300: RNCC: 3 | RNVC: 2

17 Nov 2008

4730-01-568-7423
Tube Tee

015687423
MS51510B20S: RNCC: 2 | RNVC: 2
J514: RNCC: 5 | RNVC: 1

7 Nov 2008

4730-01-568-6186
Adapter And Flange Assembly

015686186
3113294C1: RNCC: 3 | RNVC: 2
3113294C1L: RNCC: 5 | RNVC: 9

4 Nov 2008

4730-01-568-6005
Hose Connector Sleeve

4 Nov 2008

4730-01-568-5870
Hose Nipple

015685870
3113346C1: RNCC: 3 | RNVC: 2
3113346C1L: RNCC: 5 | RNVC: 9

4 Nov 2008

4730-01-568-5596
Tube To Boss Elbow

4 Nov 2008

4730-01-568-3700
Tube To Hose Straight Adapter

015683700
K3W47-8-8: RNCC: 3 | RNVC: 2
70-80-790: RNCC: 5 | RNVC: 2

28 Oct 2008

4730-01-568-1135
Pipe To Tube Straight Adapter

21 Oct 2008

4730-01-568-1556
Pipe Elbow

015681556
645540-200: RNCC: 3 | RNVC: 1
208-8323648ITEMF-11: RNCC: 5 | RNVC: 1
645540-200: RNCC: 5 | RNVC: 1

22 Oct 2008

4730-01-568-1144
Pipe To Tube Elbow

21 Oct 2008

4730-01-568-1140
Pipe To Tube Elbow

21 Oct 2008

4730-01-567-8684
Hydraulic Manifold Assembly

015678684
HF38308-07: RNCC: 3 | RNVC: 2
12505552: RNCC: 7 | RNVC: 2

9 Oct 2008

4730-01-567-9741
Hose Clamp

015679741
11-941: RNCC: 3 | RNVC: 2

15 Oct 2008

4730-01-567-8331
Flange To Hose Straight Adapter

015678331
366834: RNCC: 3 | RNVC: 2
644308: RNCC: D | RNVC: 9

8 Oct 2008

4730-01-567-8336
Hydraulic System Accessories Manifold

8 Oct 2008

4730-01-567-7385
Bspp Npt Adpt

6 Oct 2008

4730-01-567-6881
Exhaust-Intake Pneumatic Muffler

015676881
MM001A: RNCC: 3 | RNVC: 2

2 Oct 2008

4730-01-567-5116
Hose Clamp

015675116
AA52506-F-020: RNCC: 2 | RNVC: 2
AA52506: RNCC: 4 | RNVC: 1

29 Sep 2008

4730-01-567-4557
Suction Strainer

26 Sep 2008

4730-01-567-4079
Luer Fitting

015674079
17048273: RNCC: 3 | RNVC: 2

25 Sep 2008

4730-01-567-4081
Tubing Insert

015674081
17109273: RNCC: 3 | RNVC: 2

25 Sep 2008

4730-01-567-3688
Tube Tee

015673688
872FS12: RNCC: 3 | RNVC: 9
145820: RNCC: 5 | RNVC: 2

24 Sep 2008

4730-01-567-3344
Hose Clamp

015673344
87443510: RNCC: 3 | RNVC: 2

24 Sep 2008

4730-01-567-2753
Tube To Boss Elbow

22 Sep 2008

4730-01-567-2480
Lubrication Fitting

015672480
87414: RNCC: 3 | RNVC: 2
15/087414: RNCC: D | RNVC: 9

22 Sep 2008

4730-01-567-2358
Pipe To Tube Straight Adapter

015672358
2672: RNCC: 3 | RNVC: 2
2672: RNCC: 5 | RNVC: 9

22 Sep 2008

4730-01-567-1236
Tube To Hose Elbow

18 Sep 2008

4730-01-567-0253
Pipe Tee

16 Sep 2008

4730-01-566-9618
Elbow Fitting

15 Sep 2008

4730-01-566-9607
Elbowrg33

15 Sep 2008

4730-01-566-9723
Straightrg33 Pin

15 Sep 2008

4730-01-566-9619
Pipe To Hose Straight Adapter

15 Sep 2008

4730-01-566-9617
Bulkhead Fitting

15 Sep 2008

4730-01-566-9588
Pin Dowel

15 Sep 2008

4730-01-566-9558
Rese Clamp Assembly

15 Sep 2008

4730-01-566-7500
Tube Nipple

015667500
81827427: RNCC: 3 | RNVC: 2

9 Sep 2008

4730-01-566-6455
3-8 Nptf To Fitting

5 Sep 2008

4730-01-566-6466
Pipe Fitting

015666466
3685620C1: RNCC: 3 | RNVC: 2
2404-08-08: RNCC: 5 | RNVC: 2

5 Sep 2008

4730-01-566-5959
Pipe Elbow

4 Sep 2008

4730-01-566-5606
Push To Connec Plug

4 Sep 2008

4730-01-566-3714
Pipe To Hose Straight Adapter

28 Aug 2008

4730-01-566-2989
Pipe To Boss Straight Adapter

27 Aug 2008

4730-01-566-1874
Pipe Plug

015661874
SS-2MO-P: RNCC: 3 | RNVC: 2
SS-12-MO-P6T-MM: RNCC: 5 | RNVC: 1

22 Aug 2008

4730-01-566-0733
Pipe To Tube Elbow

19 Aug 2008

4730-01-565-9387
Pipe To Tube Straight Adapter

13 Aug 2008

4730-01-565-9375
Pipe Coupling

13 Aug 2008

4730-01-565-8419
Fluid Pressure Line Multiple Connector

015658419
41862600: RNCC: 3 | RNVC: 2

8 Aug 2008

4730-01-565-8420
Fluid Pressure Line Multiple Connector

015658420
41862800: RNCC: 3 | RNVC: 2

8 Aug 2008

4730-01-565-8260
Suction Pump Connector

015658260
41862200: RNCC: 3 | RNVC: 2

7 Aug 2008

4730-01-565-7750
Snout Housing

015657750
41802300: RNCC: 3 | RNVC: 2

6 Aug 2008

4730-01-565-7747
Tube Fitting Compression Ferrule

015657747
40200302: RNCC: 3 | RNVC: 2

6 Aug 2008

4730-01-565-7736
Quick Disconnect Coupling Half

015657736
41151001: RNCC: 3 | RNVC: 2

6 Aug 2008

4730-01-565-6907
Adapter And Flange Assembly

015656907
38958-1: RNCC: 3 | RNVC: 2

4 Aug 2008

4730-01-565-6331
Pipe Flange

015656331
2W7886: RNCC: 3 | RNVC: 2

31 Jul 2008

4730-01-565-6303
Pipe Flange

015656303
2W7755: RNCC: 3 | RNVC: 2

31 Jul 2008

4730-01-565-6304
Pipe Flange

015656304
4P0300: RNCC: 3 | RNVC: 2

31 Jul 2008

4730-01-565-5427
Pipe To Tube Elbow

015655427
S-25M0-9: RNCC: 3 | RNVC: 2

29 Jul 2008

4730-01-565-4751
Pipe To Hose Elbow

015654751
2503-8-6: RNCC: 3 | RNVC: 2

25 Jul 2008

4730-01-565-4640
Pipe To Hose Straight Adapter

015654640
6400-8-6: RNCC: 3 | RNVC: 2

25 Jul 2008

4730-01-565-3932
Pipe To Tube Straight Adapter

015653932
SS-10M0-1-2: RNCC: 3 | RNVC: 2

23 Jul 2008

4730-01-565-3917
Hydraulic System Accessories Manifold

015653917
PMSI-15-5462: RNCC: 3 | RNVC: 2

23 Jul 2008

4730-01-565-3764
Lubrication Fitting

015653764
1103K27: RNCC: 3 | RNVC: 2

23 Jul 2008

4730-01-565-3214
Tube Elbow

015653214
4W1162: RNCC: 3 | RNVC: 2

21 Jul 2008

4730-01-565-2350
Pipe Flange

015652350
2W2682: RNCC: 3 | RNVC: 2

16 Jul 2008

4730-01-565-0738
Tube To Boss Straight Adapter

10 Jul 2008

4730-01-565-0568
Hydraulic System Accessories Manifold

015650568
30103039: RNCC: 3 | RNVC: 2
14KP833: RNCC: 5 | RNVC: 2
14KP833: RNCC: 5 | RNVC: 9

9 Jul 2008

4730-01-565-0233
Special-Shaped Hose Clamp

9 Jul 2008

4730-01-564-9731
Hose To Boss Straight Adapter

015649731
CMC-TI4-5902-1-20: RNCC: 3 | RNVC: 1
MIL-F-24787/3 TYPE C: RNCC: 4 | RNVC: 1
MIL-F-24787: RNCC: 5 | RNVC: 1
517-7411047ITEMRO-F17-3: RNCC: 5 | RNVC: 2

7 Jul 2008

4730-01-564-9776
Hydraulic System Accessories Manifold

015649776
93209500: RNCC: 3 | RNVC: 2
3662240: RNCC: 5 | RNVC: 2
3662240: RNCC: 7 | RNVC: 9

7 Jul 2008

4730-01-564-8529
Hose Clamp Kit

015648529
57K4744: RNCC: 3 | RNVC: 2

30 Jun 2008

4730-01-564-8300
Hose Clamp

30 Jun 2008

4730-01-564-8307
Hose Clamp

015648307
107578842C: RNCC: 3 | RNVC: 2

30 Jun 2008

4730-01-564-7870
Adapter And Flange Assembly

27 Jun 2008

4730-01-564-6364
Hose Clamp

015646364
TSS36S30(00C): RNCC: 3 | RNVC: 2

23 Jun 2008

4730-01-564-6291
Sediment Strainer Element

015646291
2W3589: RNCC: 3 | RNVC: 2

23 Jun 2008

4730-01-564-5978
Special Nipple

015645978
2W3843: RNCC: 3 | RNVC: 2

20 Jun 2008

4730-01-564-5209
Pipe To Hose Elbow

19 Jun 2008

4730-01-564-5010
Pipe Expansion Joint

015645010
2W3031: RNCC: 3 | RNVC: 2

18 Jun 2008

4730-01-564-4260
Hose Clamp

17 Jun 2008

4730-01-564-2754
Hose Clamp

015642754
9139807: RNCC: 3 | RNVC: 2

11 Jun 2008

4730-01-564-2899
Quick Disconnect Coupling Half

11 Jun 2008

4730-01-564-0943
Pipe Elbow

4 Jun 2008

4730-01-564-0315
Quick Disconnect Coupling Assembly

3 Jun 2008

4730-01-564-0074
Hose Flange Socket Assembly

2 Jun 2008

4730-01-563-9815
Pipe To Tube Straight Adapter

015639815
RACO3515: RNCC: 3 | RNVC: 2

30 May 2008

4730-01-563-9828
Isolator Tube

015639828
CA230161200: RNCC: 3 | RNVC: 2

31 May 2008

4730-01-563-8617
Tube Union

27 May 2008

4730-01-563-9208
Pipe Nipple

29 May 2008

4730-01-563-8741
Special-Shaped Hose Clamp

27 May 2008

4730-01-563-8669
Flange Elbow

015638669
90-019-104: RNCC: 3 | RNVC: 2

27 May 2008

4730-01-563-8625
Pipe Coupling

27 May 2008

4730-01-563-8556
Hose Clamp

27 May 2008

4730-01-563-7421
Fluid Pressure Line Multiple Connector

015637421
JETX0538150B: RNCC: 3 | RNVC: 2

20 May 2008

4730-01-563-6700
Tube To Boss Straight Adapter

015636700
8-6F5OMXSS: RNCC: 3 | RNVC: 2
8-6F5OMXSS: RNCC: 5 | RNVC: 2

16 May 2008

4730-01-563-5778
Swivel Flange T Straight Adapter

14 May 2008

4730-01-563-5421
Hose Clamp

015635421
28085R1: RNCC: 3 | RNVC: 2

13 May 2008

4730-01-563-5762
Hose Clamp

015635762
299270C91: RNCC: 3 | RNVC: 2

14 May 2008

4730-01-563-5731
Tube Tee

015635731
286612C1: RNCC: 3 | RNVC: 2

14 May 2008

4730-01-563-5462
Bulk Fitting Assy

015635462
LC545-16-12AE: RNCC: 3 | RNVC: 2

13 May 2008

4730-01-563-5346
Hose Clamp

015635346
27702R1: RNCC: 3 | RNVC: 2

13 May 2008

4730-01-563-3266
Hose Connector Sleeve

015633266
3113337C1: RNCC: 3 | RNVC: 2
3113337C1L: RNCC: 5 | RNVC: 9

8 May 2008

4730-01-563-3166
Hose Clamp

015633166
1682308C1: RNCC: 3 | RNVC: 2

8 May 2008

4730-01-563-2269
Pipe Reducer

6 May 2008

4730-01-563-1396
Hose Bushing

2 May 2008

4730-01-563-1350
Flange To Hose Elbow

015631350
1664816C1: RNCC: 3 | RNVC: 2

2 May 2008

4730-01-563-0966
Pipe Elbow

015630966
2024440C1: RNCC: 3 | RNVC: 2

1 May 2008

4730-01-563-0606
Hose Clamp

015630606
54-815504104: RNCC: 3 | RNVC: 2
54-815504104: RNCC: 5 | RNVC: 2

30 Apr 2008

4730-01-562-9711
Primer Adapter

015629711
1824924C1: RNCC: 3 | RNVC: 2

28 Apr 2008

4730-01-562-9691
Pipe To Boss Straight Adapter

015629691
444004: RNCC: 3 | RNVC: 2

28 Apr 2008

4730-01-562-9692
Hose Elbow

015629692
444821C2: RNCC: 3 | RNVC: 2

28 Apr 2008

4730-01-562-8884
Hose Clamp

015628884
1806941C1: RNCC: 3 | RNVC: 2

24 Apr 2008

4730-01-562-8797
Hose Elbow

015628797
1618454C1: RNCC: 3 | RNVC: 2

24 Apr 2008

4730-01-562-8783
Pipe Elbow Assembly

24 Apr 2008

4730-01-562-8622
Hose Elbow

015628622
359279C1: RNCC: 3 | RNVC: 2

23 Apr 2008

4730-01-562-8334
Hose Plug

015628334
1017960R1: RNCC: 3 | RNVC: 2

23 Apr 2008

4730-01-562-8296
Tube Elbow

015628296
86634R1: RNCC: 3 | RNVC: 2

23 Apr 2008

4730-01-562-8281
Flex Tube Connector

015628281
59595D: RNCC: 3 | RNVC: 2

23 Apr 2008

4730-01-562-8286
Tube Elbow

015628286
782080C1: RNCC: 3 | RNVC: 2

23 Apr 2008

4730-01-562-8291
Comp Flex Tube Tee

015628291
80552HX: RNCC: 3 | RNVC: 2

23 Apr 2008

4730-01-562-8226
Hose Coupling

015628226
2005599C3: RNCC: 3 | RNVC: 2

23 Apr 2008

4730-01-562-8065
Tube Elbow

015628065
3515161C1: RNCC: 3 | RNVC: 2

22 Apr 2008

4730-01-562-7840
Pipe Clamp

015627840
505220C1: RNCC: 3 | RNVC: 2

22 Apr 2008

4730-01-562-7827
Hose Clamp

015627827
1743301A: RNCC: 3 | RNVC: 2

22 Apr 2008

4730-01-562-7781
Special Elbow

015627781
459279C1: RNCC: 3 | RNVC: 2

22 Apr 2008

4730-01-562-7682
Tube Elbow

015627682
30761V: RNCC: 3 | RNVC: 2

21 Apr 2008

4730-01-562-6642
Tube To Hose Straight Adapter

16 Apr 2008

4730-01-562-5920
Pipe To Tube Straight Adapter

015625920
RACO3516: RNCC: 3 | RNVC: 2

11 Apr 2008

4730-01-562-5921
Pipe To Hose Elbow

015625921
RACO3546: RNCC: 3 | RNVC: 2

11 Apr 2008

4730-01-562-5712
Adapter Bushing

015625712
UHK43270-1: RNCC: 3 | RNVC: 2

10 Apr 2008

4730-01-562-4377
Quick Disconnect Coupling Half

015624377
NS-1002-16FP: RNCC: 3 | RNVC: 2

8 Apr 2008

4730-01-562-4378
Quick Disconnect Coupling Half

015624378
NS-1001-16FP: RNCC: 3 | RNVC: 2

8 Apr 2008

4730-01-562-4376
Pipe To Hose Elbow

015624376
RAC03565: RNCC: 3 | RNVC: 2

8 Apr 2008

4730-01-562-3395
Pipe Lateral

015623395
M1183/6-42A: RNCC: 4 | RNVC: 1
209-7006877ITEM340: RNCC: 5 | RNVC: 1

4 Apr 2008

4730-01-562-3460
Air Hose Connector

11 Jun 2009

4730-01-562-2871
Hose Mender

015622871
TC-7044: RNCC: 3 | RNVC: 2

3 Apr 2008

4730-01-562-0853
Hydraulic System Accessories Manifold

015620853
AGA-15222-0: RNCC: 3 | RNVC: 2

28 Mar 2008

4730-01-562-0999
Hose Clamp

015620999
QF25-CTC: RNCC: 3 | RNVC: 2

28 Mar 2008

4730-01-562-0518
Quick Disconnect Coupling Half

015620518
8DBS100F: RNCC: 3 | RNVC: 2

27 Mar 2008

4730-01-561-7203
Pipe Nipple

015617203
4549K577: RNCC: 3 | RNVC: 2

14 Mar 2008

4730-01-561-7176
Hose Clamp

14 Mar 2008

4730-01-561-6454
Tube To Boss Elbow

13 Mar 2008

4730-01-561-5407
Pipe Tee

015615407
AII-MTS-05-238APPXAITEMF15: RNCC: 3 | RNVC: 1

10 Mar 2008

4730-01-561-3793
Hose To Boss Straight Adapter

015613793
SS-4-TP4-TA4: RNCC: 3 | RNVC: 1
SS-4-TP4-TA4: RNCC: 5 | RNVC: 9

4 Mar 2008

4730-01-561-3377
V And D Adapter

015613377
SS-400-1(QN1390022): RNCC: 3 | RNVC: 1

3 Mar 2008

4730-01-561-3350
Containment 17

015613350
VC#17: RNCC: 3 | RNVC: 1

3 Mar 2008

4730-01-561-1691
Pipe Tee

27 Feb 2008

4730-01-560-8439
Suction Strainer

015608439
00NPS150: RNCC: 3 | RNVC: 2
529-02-S0006: RNCC: 5 | RNVC: 1

14 Feb 2008

4730-01-560-6264
Swivel Flange To Tube Elbow

015606264
6D28403-P9-4: RNCC: 3 | RNVC: 1

6 Feb 2008

4730-01-560-7011
Quick Disconnect Coupling Half

015607011
28068489-102: RNCC: 3 | RNVC: 2

8 Feb 2008

4730-01-560-5426
Fluid Pressur Multiple Connector

4 Feb 2008

4730-01-560-0664
Walseal Adapter

015600664
CMC-2-421-83W-1: RNCC: 3 | RNVC: 1

15 Jan 2008

4730-01-560-0570
Tube To Boss Straight Adapter

015600570
0353-8-8: RNCC: 3 | RNVC: 2
3005885: RNCC: 5 | RNVC: 2

14 Jan 2008

4730-01-559-8047
Pipe To Tube Straight Adapter

015598047
B37737-005: RNCC: 3 | RNVC: 2

7 Jan 2008

4730-01-559-7653
Pipe Reducer

015597653
RI3/4EDX1CF: RNCC: 3 | RNVC: 2

4 Jan 2008

4730-01-559-6675
Tube Elbow

015596675
AA67028-10K: RNCC: 3 | RNVC: 2

29 Dec 2007

4730-01-559-4866
Relief Valv Adapter

015594866
6391012-1: RNCC: 3 | RNVC: 1
6394433-02 FIND 022: RNCC: 5 | RNVC: 1
6395002-012 FIND 051: RNCC: 5 | RNVC: 1
6394420-02 FIND 028: RNCC: 5 | RNVC: 1
6394433-02 FIND 022D4: RNCC: 5 | RNVC: 2
6395002-012 FIND 051D4: RNCC: 5 | RNVC: 2
6391012D4: RNCC: 5 | RNVC: 2
6391012-1D4: RNCC: 5 | RNVC: 2
6394420-02 FIND 028D4: RNCC: 5 | RNVC: 2

19 Dec 2007

4730-01-559-4152
Predator Adapter

015594152
104-5505-9008: RNCC: 3 | RNVC: 2

18 Dec 2007

4730-01-559-1398
Quick Disconnect Coupling Half

015591398
0030-0074: RNCC: 3 | RNVC: 2
6393811-01 FIND 3: RNCC: 5 | RNVC: 1

6 Dec 2007

4730-01-559-0883
Pipe To Boss Straight Adapter

015590883
16-140137: RNCC: 3 | RNVC: 2

5 Dec 2007

4730-01-559-0048
Hose Coupling

015590048
390L-08548: RNCC: 3 | RNVC: 1

3 Dec 2007

4730-01-559-0028
1000Ml Cylinder

015590028
12640: RNCC: 3 | RNVC: 1

3 Dec 2007

4730-01-559-0029
Cylinder

015590029
12645: RNCC: 3 | RNVC: 1

3 Dec 2007

4730-01-558-7282
Tube To Boss Straight Adapter

015587282
8-6ZHA5-SS-D804091: RNCC: 3 | RNVC: 2

20 Nov 2007

4730-01-558-6941
Tube To Hose Straight Adapter

015586941
36882-5-4C-SM: RNCC: 3 | RNVC: 2

19 Nov 2007

4730-01-558-6942
Tube To Hose Straight Adapter

015586942
30682-6-4B: RNCC: 3 | RNVC: 2

19 Nov 2007

4730-01-558-6916
Steam Trap Parts Kit

015586916
63331: RNCC: 3 | RNVC: 2

19 Nov 2007

4730-01-558-6124
Pipe To Tube Straight Adapter

015586124
SS-400-4-6AN: RNCC: 3 | RNVC: 1
SS-400-4-6AN: RNCC: 5 | RNVC: 9

15 Nov 2007

4730-01-558-5841
Pipe To Tube Straight Adapter

015585841
6-4GBZ-SS: RNCC: 3 | RNVC: 1

14 Nov 2007

4730-01-558-5458
Fueling Manifold

015585458
85006821: RNCC: 3 | RNVC: 2
3820810: RNCC: 5 | RNVC: 2
3595748: RNCC: 5 | RNVC: 9
3820810: RNCC: 7 | RNVC: 9

14 Nov 2007

4730-01-558-5345
Tube Coupling Swage Ferrule

015585345
AS1737D24: RNCC: 3 | RNVC: 2

13 Nov 2007

4730-01-558-5234
Hose Elbow

015585234
592946C1: RNCC: 3 | RNVC: 2

13 Nov 2007

4730-01-558-5063
Pipe Clamp Coupling

015585063
2-75T: RNCC: 3 | RNVC: 2
2226270: RNCC: 7 | RNVC: 2

13 Nov 2007

4730-01-558-4827
Sediment Strainer Body

015584827
12KP266: RNCC: 3 | RNVC: 2

10 Nov 2007

4730-01-558-4281
Threaded Tube Fitting Plug

015584281
3244460: RNCC: 3 | RNVC: 2

8 Nov 2007

4730-01-558-2937
Loop Clamp

015582937
AA52506-F-72: RNCC: 2 | RNVC: 2

5 Nov 2007

4730-01-558-1951
Hose To Boss Straight Adapter

015581951
RD-5-10557-0: RNCC: 3 | RNVC: 2

2 Nov 2007

4730-01-557-9453
Pipe Elbow

015579453
2100603: RNCC: 3 | RNVC: 2

31 Oct 2007

4730-01-557-8482
Hose Coupling

015578482
295460C1: RNCC: 3 | RNVC: 2

30 Oct 2007

4730-01-557-8422
Hose Tee

015578422
007911: RNCC: 3 | RNVC: 2

30 Oct 2007

4730-01-557-7390
Pipe To Tube Elbow

015577390
J1231 4-2 430360S: RNCC: 3 | RNVC: 2

26 Oct 2007

4730-01-557-7168
Pipe Elbow

015577168
1001590: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-6950
Tube Elbow

015576950
R0060523: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-6862
Boss Reducer

015576862
R2006724-GH00: RNCC: 3 | RNVC: 9

25 Oct 2007

4730-01-557-6670
Hose Elbow

015576670
R0080079: RNCC: 3 | RNVC: 2
R0080079: RNCC: 5 | RNVC: 2

25 Oct 2007

4730-01-557-6629
Hose Elbow

015576629
R0068888: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-6627
Quick Disconnect Elbow

015576627
R0064695: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-6623
Hose Elbow

015576623
R0060525: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-6626
Hose Elbow

015576626
R0068885: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-6535
Quick Disconnect Coupling Assembly

015576535
R0075888: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-6493
Hose Elbow

015576493
R0060636: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-6492
Hose Elbow

015576492
R0054331: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-6192
Hose Elbow

015576192
R0062932: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-5974
Pipe Elbow

015575974
R0064494: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-5834
Hose Elbow

015575834
R0066704: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-5873
Pipe Nipple

015575873
R0022385-0301: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-5872
Flange To Hose Straight Adapter

015575872
R0022384-0301: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-5837
Hose Elbow

015575837
R0077562: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-5739
Hose Clamp

015575739
0101047-GF00-001: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-5567
Quick Disconnect Coupling Half

015575567
R0075887: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-5532
Tube To Boss Straight Adapter

015575532
R0056519: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-5558
Quick Disconnect Coupling Half

015575558
R0070584: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-5497
Pipe Elbow

015575497
R0060829: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-5458
Quick Disconnect Coupling Half

015575458
R0076074: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-5460
Pipe Tee

015575460
016012: RNCC: 3 | RNVC: 9

25 Oct 2007

4730-01-557-5438
Pipeline Air Drier And Cooler

015575438
013465: RNCC: 3 | RNVC: 2

23 Jun 2010

4730-01-557-5436
Swivel Flange To Hose Elbow

015575436
R0065434: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-5416
Boss Coupling

015575416
R0065768: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-5433
Hose Elbow

015575433
R0059070: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-5415
Tube To Boss Straight Adapter

015575415
R0056508: RNCC: 3 | RNVC: 2

25 Oct 2007

4730-01-557-3320
Pipe To Tube Straight Adapter

015573320
JD7844: RNCC: 3 | RNVC: 2

19 Oct 2007

4730-01-557-3279
Lubrication Fitting

015573279
9000-385: RNCC: 3 | RNVC: 2

19 Oct 2007

4730-01-557-3113
Plug Bag Bladder

015573113
BCN106: RNCC: 3 | RNVC: 1

18 Oct 2007

4730-01-557-2722
Tube Elbow

015572722
AS1040D0303: RNCC: 3 | RNVC: 2

17 Oct 2007

4730-01-557-1800
Hose Clamp

015571800
15573012: RNCC: 3 | RNVC: 2

16 Oct 2007

4730-01-557-0808
Lubrication Fitting

015570808
3003376: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0762
Pipe Elbow

015570762
1000514: RNCC: 3 | RNVC: 2

11 Oct 2007

NSN 4730-01-557-0702 015570702 CLAMP,HOSE

4730-01-557-0702
Hose Clamp

015570702
11645-00957: RNCC: 3 | RNVC: 2
10018079: RNCC: 5 | RNVC: 2
1001513: RNCC: 5 | RNVC: 2

11 Oct 2007

4730-01-557-0683
Tube To Boss Straight Adapter

015570683
1002428: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0508
Pipe Elbow

015570508
3007137: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0484
Pipe Elbow

015570484
10003320: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0537
Hose To Boss Straight Adapter

015570537
2002326: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0536
Flange To Hose Elbow

015570536
2002000: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0539
Hose Elbow

015570539
3009162: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0538
Pipe Plug

015570538
2000188: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0481
Pipe To Tube Straight Adapter

015570481
10002679: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0472
Loop Clamp

015570472
2002419: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0455
Straight Tubing Connector

015570455
3006700: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0442
Pipe Reducer

015570442
3002951: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0436
Hose Connector Sleeve

015570436
2000160: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0413
Pipe Plug

015570413
2002521: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0430
Pipe To Tube Straight Adapter

015570430
1002855: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0417
Hose Nipple

015570417
2002523: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0412
Pipe Elbow

015570412
2002522: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0328
Pipe Bushing

015570328
3007534: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0398
Hose Elbow

015570398
1001901: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0306
Pipe Elbow

015570306
1000603: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0317
Pipe Elbow

015570317
3001000: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0337
Pipe Elbow

015570337
1001547: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0339
Pipe To Tube Elbow

015570339
3008137: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0332
Pipe Elbow

015570332
4001096: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0334
Pipe To Tube Straight Adapter

015570334
2002406: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0326
Pipe Elbow

015570326
2002374: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0327
Pipe Elbow

015570327
2002403: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0316
Pipeline Air Drier And Cooler

015570316
1000918: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0315
Pipe Elbow

015570315
2002396: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0309
Pipe Elbow

015570309
1001594: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0314
Pumping Filling Unit Adapter

015570314
2002390: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-557-0218
E Special Purpose Cable Assembly

015570218
1001172: RNCC: 3 | RNVC: 2

11 Oct 2007

4730-01-556-9931
Adapter Bushing

015569931
104-5504-0405: RNCC: 3 | RNVC: 2

10 Oct 2007

4730-01-556-9135
Pipe Nipple

015569135
AS4842/2: RNCC: 3 | RNVC: 1
AS896: RNCC: 3 | RNVC: 1
AS896J0808: RNCC: 3 | RNVC: 2

9 Oct 2007

4730-01-556-8078
Tube To Hose Straight Adapter

015568078
1000651: RNCC: 3 | RNVC: 2

5 Oct 2007

4730-01-556-8077
Pipe Elbow

015568077
1000649: RNCC: 3 | RNVC: 2

5 Oct 2007

4730-01-556-8075
Tube To Boss Straight Adapter

015568075
1000642: RNCC: 3 | RNVC: 2

5 Oct 2007

4730-01-556-8068
Pipe Elbow

015568068
1000406: RNCC: 3 | RNVC: 2

5 Oct 2007

4730-01-556-8079
Quick Disconnect Elbow

015568079
1000659: RNCC: 3 | RNVC: 2

5 Oct 2007

4730-01-556-7278
Quick Disconnect Reducer

015567278
16-12 140140: RNCC: 3 | RNVC: 2

4 Oct 2007

4730-01-556-7171
Special-Shaped Hose Clamp

015567171
LNU4222/127: RNCC: 3 | RNVC: 2

4 Oct 2007

4730-01-556-7113
Lubrication Fitting

015567113
109454: RNCC: 3 | RNVC: 2
109454: RNCC: 5 | RNVC: 9

4 Oct 2007

4730-01-556-7119
Hose Clamp

015567119
D2835-92: RNCC: 3 | RNVC: 2

4 Oct 2007

4730-01-556-7083
Misc Wrg-Op Elecip

015567083
3554182F93: RNCC: 3 | RNVC: 2
3554182F93: RNCC: 3 | RNVC: 2

4 Oct 2007

4730-01-556-6804
Pipe To Hose Elbow

015566804
864459R1: RNCC: 3 | RNVC: 2
864459R1: RNCC: 5 | RNVC: 2
864459R1: RNCC: 5 | RNVC: 9
AD-6017: RNCC: D | RNVC: 9

3 Oct 2007

4730-01-556-6824
Pipe Elbow

015566824
9410977: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-6796
Flexible Tube Coupling Assembly

015566796
753329C1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-6801
Pipe To Hose Straight Adapter

015566801
864441R1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-6802
Pipe To Hose Elbow

3 Oct 2007

4730-01-556-6744
Fluid Pressure Line Multiple Connector

015566744
641005P005: RNCC: 3 | RNVC: 2
641005P005: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-6693
Tube-Hose Fitting Compression Sleeve

3 Oct 2007

4730-01-556-6568
Hose Clamp

015566568
446075R91: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-6563
Pipe Plug

015566563
444632: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-6566
Pipe Plug

3 Oct 2007

4730-01-556-6560
Pipe To Hose Elbow

3 Oct 2007

4730-01-556-6559
Pipe Elbow

3 Oct 2007

4730-01-556-6564
Pipe Plug

3 Oct 2007

4730-01-556-6558
Pipe Reducer

3 Oct 2007

4730-01-556-6503
Hose Clamp

015566503
391671R91: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-6069
Pipe Elbow

015566069
3554423F91: RNCC: 3 | RNVC: 2
3554423F91: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-5959
Pipe Elbow Assembly

015565959
3541265C1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-5911
Tube To Hose Straight Adapter

015565911
3532691C1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-5901
Hose Clamp

3 Oct 2007

4730-01-556-5896
Pipe Elbow

3 Oct 2007

4730-01-556-5563
Hose Clamp

3 Oct 2007

4730-01-556-5498
Hose Clamp

015565498
299565C1: RNCC: 3 | RNVC: 2
299565C1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-5496
Hose Elbow

015565496
299466C1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-5497
Pipe Elbow Assembly

3 Oct 2007

4730-01-556-5488
Quick Disconnect Coupling Half

3 Oct 2007

4730-01-556-5489
Pipe To Tube Straight Adapter

3 Oct 2007

4730-01-556-5487
Quick Disconnect Coupling Half

015565487
295459C91: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-5486
Pipe To Hose Straight Adapter

015565486
293344C1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-5476
Loop Clamp

3 Oct 2007

4730-01-556-5479
Hose Clamp

3 Oct 2007

4730-01-556-5478
Hose Clamp

015565478
279027R91: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-5467
Tube Coupling Nut

3 Oct 2007

4730-01-556-5301
Hose Elbow

015565301
2506204C1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-5285
Hydraulic System Access Manifold

015565285
2505848C91: RNCC: 3 | RNVC: 2
2505848C91: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-5300
Electrical Receptacle Connector

015565300
2506201C1: RNCC: 3 | RNVC: 2
2506201C1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-5283
Hydraulic System Access Manifold

015565283
2505846C1: RNCC: 3 | RNVC: 2
2505846C1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-5286
Hose Fitting Tank Valve Coupling Assembly

015565286
2505849C1: RNCC: 3 | RNVC: 2
2505849C1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-5239
Pipe Elbow Assembly

015565239
2025773C1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-5222
Pipe Elbow

3 Oct 2007

4730-01-556-5217
Pipe Coupling

015565217
2017507C1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-5223
Pipe Elbow

3 Oct 2007

4730-01-556-5227
Hose Clamp

3 Oct 2007

4730-01-556-5221
Pipe Elbow Assembly

3 Oct 2007

4730-01-556-5225
Quick Disconnect Elbow

3 Oct 2007

4730-01-556-5168
Tube Assembly Kit

015565168
1845826C92: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-5167
Hose Fitting Tank Valve Coupling Assembly

015565167
1845825C1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-4867
Tube Fitting Clinch Sleeve

015564867
1812348C1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-4879
Pipe Elbow

015564879
1814737C2: RNCC: 3 | RNVC: 2
1814737C2: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-4700
Tube Inlet Elbow

015564700
2002422: RNCC: 3 | RNVC: 2

16 Jan 2008

4730-01-556-4640
Sediment Strainer Element

015564640
1802870C1: RNCC: 3 | RNVC: 2
1802870C1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-4515
Automotive Air Br Dummy Coupling

015564515
140895H: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-4536
Inflating Air Chuck

015564536
1652002R1: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-4512
Pipe To Tube Elbow

3 Oct 2007

4730-01-556-4502
Hose Clamp

3 Oct 2007

4730-01-556-4494
Lubrication Fitting

015564494
1199T2854: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-4482
Pipe To Tube Elbow

3 Oct 2007

4730-01-556-4476
Lubrication Fitting

3 Oct 2007

4730-01-556-4443
Pipe Reducer

015564443
8-1/4 F50G-SS: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-4441
Pipe Reducer

015564441
1/2 X 1/4 PTR-SS: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-4422
Straight Tubing Connector

015564422
SAE-J514-6-4-0701038: RNCC: 3 | RNVC: 2

3 Oct 2007

4730-01-556-4369
Pipe Nipple

015564369
MS51003-6: RNCC: 2 | RNVC: 2

3 Oct 2007

4730-01-556-3947
Hydraulic Adapter

015563947
6-6FTX: RNCC: 3 | RNVC: 2

2 Oct 2007

4730-01-556-3948
Tube To Hose Straight Adapter

015563948
6-6SAEJ510-6-6: RNCC: 3 | RNVC: 2

2 Oct 2007

4730-01-556-3867
Flange To Pipe Elbow

015563867
375X025-PTR: RNCC: 3 | RNVC: 2

2 Oct 2007

4730-01-556-3866
Tube Elbow

015563866
375X025-CR: RNCC: 3 | RNVC: 2

2 Oct 2007

4730-01-556-3219
Pipe Plug

015563219
3005918: RNCC: 3 | RNVC: 2

2 Oct 2007

4730-01-556-2065
Fluid Passage Bolt

015562065
12498391: RNCC: 3 | RNVC: 2

27 Sep 2007

4730-01-556-1531
Flange To Pipe Tee

015561531
EL06SOMDCF: RNCC: 3 | RNVC: 2

25 Sep 2007

4730-01-556-1535
Tube Tee

015561535
VSTI42X2EDCF: RNCC: 3 | RNVC: 2

25 Sep 2007

4730-01-556-0968
Tube Tee

015560968
TH15LRKDSOMDCF: RNCC: 3 | RNVC: 2

24 Sep 2007

4730-01-556-1210
Threaded Tube Fitting Plug

015561210
16 HP50N: RNCC: 3 | RNVC: 2

25 Sep 2007

4730-01-556-0969
Tube Reducer

015560969
RED25/08SOMDCF: RNCC: 3 | RNVC: 2

24 Sep 2007

4730-01-556-0901
Flange To Pipe Tee

015560901
EL38SOMDCF: RNCC: 3 | RNVC: 2

24 Sep 2007

4730-01-556-0910
Tube Swivel Joint

015560910
EW38SOMDCF: RNCC: 3 | RNVC: 2

24 Sep 2007

4730-01-556-0897
Pipe To Tube Straight Adapter

015560897
GE38SMEDOMDCF: RNCC: 3 | RNVC: 2

24 Sep 2007

4730-01-556-0896
Pipe To Tube Straight Adapter

015560896
GE30SMEDOMDCF: RNCC: 3 | RNVC: 2

24 Sep 2007

4730-01-556-0076
Bulkhead Hose Connector

015560076
ND5401: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0224
Tube Elbow

015560224
WSV08SOMDCF: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0363
Hydraulic Manifold Assembly

015560363
PE24356: RNCC: 3 | RNVC: 2

21 Sep 2007

4730-01-556-0358
Tube To Hose Straight Adapter

015560358
ND0334: RNCC: 3 | RNVC: 2

21 Sep 2007

4730-01-556-0356
Hydraulic Manifold Assembly

015560356
PE25935: RNCC: 3 | RNVC: 2

21 Sep 2007

4730-01-556-0246
Tube Tee

015560246
T12SOMDCF: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0249
Tube Tee

015560249
T28LOMDCF: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0251
Tube Tee

015560251
ET08SOMDCF: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0250
Tube Tee

015560250
VSTI14X1.50RCF: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0247
Tube Tee

015560247
T20SOMDCF: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0253
Tube Tee

015560253
ET12SOMDCF: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0248
Tube Tee

015560248
T25SOMDCF: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0237
Tube Reducer

015560237
RED38/30SOMDCF: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0220
Pipe To Tube Elbow

015560220
WEE12SMOMDCF: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0221
Pipe To Tube Elbow

015560221
WEE30SMOMDCF: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0218
Pipe To Tube Elbow

015560218
WEE25SROMDCF: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0245
Tube Tee

015560245
T08SOMDCF: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0219
Pipe To Tube Elbow

015560219
WEE10SROMDCF: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0229
Tube Reducer

015560229
RED14/10SOMDCF: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0233
Tube Reducer

015560233
RED16/12SOMDCF: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0131
Tube To Hose Straight Adapter

015560131
ND8764: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0133
Tube To Hose Straight Adapter

015560133
ND4514: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-556-0079
Pipe Elbow

015560079
ND9822: RNCC: 3 | RNVC: 2

20 Sep 2007

4730-01-555-7337
Air Hose Connector

015557337
6157: RNCC: 3 | RNVC: 1
516-5486648 ITEM F615: RNCC: 5 | RNVC: 1
6157D4: RNCC: 5 | RNVC: 2

12 Sep 2007

4730-01-555-6939
Quick-Disconnect Nipple

015556939
145HS701-25: RNCC: 1 | RNVC: 2
17906-701-25: RNCC: 3 | RNVC: 2

11 Sep 2007

4730-01-555-6358
Pipe To Hose Elbow

015556358
25091661: RNCC: 3 | RNVC: 2
10025965: RNCC: 5 | RNVC: 2
63AX 3848: RNCC: 5 | RNVC: 9

10 Sep 2007

4730-01-555-6068
Pipe Coupling

015556068
AN910-4K: RNCC: 2 | RNVC: 2

7 Sep 2007

4730-01-555-6048
Adapter Bushing

015556048
100128: RNCC: 3 | RNVC: 2

7 Sep 2007

4730-01-555-5925
Hose Clamp

015555925
106076: RNCC: 3 | RNVC: 2

7 Sep 2007

4730-01-555-5920
Pipe Elbow

015555920
105789: RNCC: 3 | RNVC: 2
07-05849M001: RNCC: 5 | RNVC: 2

7 Sep 2007

4730-01-555-5927
Pipe Elbow

015555927
106077: RNCC: 3 | RNVC: 2

7 Sep 2007

4730-01-555-5923
Hose Elbow

015555923
106074: RNCC: 3 | RNVC: 2

7 Sep 2007

4730-01-555-5924
Hose Clamp

015555924
106075: RNCC: 3 | RNVC: 2

7 Sep 2007

4730-01-555-5918
Hose Elbow

015555918
105693: RNCC: 3 | RNVC: 2

7 Sep 2007

4730-01-555-5909
Pipe Reducer

015555909
105662: RNCC: 3 | RNVC: 2

7 Sep 2007

4730-01-555-5910
Pipe Elbow

015555910
105664: RNCC: 3 | RNVC: 2
40EL45-103A: RNCC: 5 | RNVC: 2

7 Sep 2007

4730-01-555-5828
Hose Clamp

015555828
101603: RNCC: 3 | RNVC: 2

7 Sep 2007

4730-01-555-5827
Hose Clamp

015555827
101601: RNCC: 3 | RNVC: 2

7 Sep 2007

4730-01-555-5825
Hose Clamp

015555825
101604: RNCC: 3 | RNVC: 2

7 Sep 2007

4730-01-555-5696
Grease Zert

015555696
3698159: RNCC: 3 | RNVC: 2

7 Sep 2007

4730-01-555-5666
Hose Clamp

015555666
3698099: RNCC: 3 | RNVC: 2

7 Sep 2007

4730-01-555-5014
Siliconer Coupling

015555014
2002420: RNCC: 3 | RNVC: 2

6 Sep 2007

4730-01-555-4780
Hose Clamp

015554780
MRP12120-003: RNCC: 3 | RNVC: 2

6 Sep 2007

4730-01-555-4209
Fluid Filter Element

5 Sep 2007

4730-01-555-2885
Quick-Disconnect Nipple

015552885
5315K38: RNCC: 3 | RNVC: 2

30 Aug 2007

4730-01-554-8817
Sediment Strainer

015548817
PAAI010349: RNCC: 3 | RNVC: 2
FIGURE A1791A: RNCC: 5 | RNVC: 1
PAAI006886 ITEM 088: RNCC: 5 | RNVC: 2

22 Aug 2007

4730-01-554-8181
Pipe Tee

015548181
BX280694: RNCC: 3 | RNVC: 2

20 Aug 2007

4730-01-554-7205
Pipe Elbow

015547205
ND2312: RNCC: 3 | RNVC: 2

17 Aug 2007

4730-01-554-6702
Fluid Passage Bolt

015546702
HEADING 194: RNCC: 3 | RNVC: 2

16 Aug 2007

4730-01-554-6686
Hose Clamp

015546686
HEADING 251: RNCC: 3 | RNVC: 2

16 Aug 2007

4730-01-554-6640
Quick Disconnect Plug

015546640
FD1449: RNCC: 3 | RNVC: 2

16 Aug 2007

4730-01-554-6211
Hose Clamp

015546211
ND8907: RNCC: 3 | RNVC: 2

15 Aug 2007

4730-01-554-5898
Nozzle Assembly

015545898
5-4-8126-1: RNCC: 3 | RNVC: 2

14 Aug 2007

4730-01-554-6125
Swivel Joint Parts Kit

015546125
KP00277: RNCC: 3 | RNVC: 2

15 Aug 2007

4730-01-554-5983
Pipe Elbow

015545983
820-2177965,2IN,90DEG,BW(MOD): RNCC: 3 | RNVC: 1

15 Aug 2007

4730-01-554-4841
Pipe Bushing

015544841
RI1/4EDX3/8CF: RNCC: 3 | RNVC: 2
110-501: RNCC: 5 | RNVC: 2

10 Aug 2007

4730-01-554-4867
Tube Elbow

015544867
W12SCF: RNCC: 3 | RNVC: 2
W12SOMDHPCF: RNCC: 5 | RNVC: 9

10 Aug 2007

4730-01-554-4857
Pipe To Tube Straight Adapter

015544857
MAVE12SR1/4HPCF: RNCC: 3 | RNVC: 2

10 Aug 2007

4730-01-554-4842
Pipe Bushing

015544842
RI11/4EDX1/2CF: RNCC: 3 | RNVC: 2

10 Aug 2007

4730-01-554-4840
Pipe Bushing

015544840
RI1/4X1/8CF: RNCC: 3 | RNVC: 2
RI1/4X1/8HPCF: RNCC: 5 | RNVC: 9

10 Aug 2007

4730-01-554-4854
Tube To Boss Straight Adapter

015544854
EGE16SREDCF: RNCC: 3 | RNVC: 2

10 Aug 2007

4730-01-554-4110
Tube To Boss Tee

015544110
SAE-AS4841: RNCC: 3 | RNVC: 1
AS1039J121212: RNCC: 5 | RNVC: 9
AS1039J121212: RNCC: 5 | RNVC: 9

8 Aug 2007

4730-01-554-3429
Pipe Coupling

015543429
6-8 HBZ SS: RNCC: 3 | RNVC: 2

7 Aug 2007

4730-01-554-3382
Quick Disconnect Coupling Half

015543382
5315K12: RNCC: 3 | RNVC: 2

6 Aug 2007

4730-01-554-3014
Pipe To Tube Elbow

015543014
FP1997: RNCC: 3 | RNVC: 2

6 Aug 2007

4730-01-554-1803
Discharge Filter

015541803
2341B121: RNCC: 3 | RNVC: 2

1 Aug 2007

4730-01-554-1712
Quick Disconnect Coupling Half

015541712
02226612: RNCC: 3 | RNVC: 2

1 Aug 2007

4730-01-554-0993
Fluid Pressure Line Multiple Connector

015540993
HEADING 196: RNCC: 3 | RNVC: 2

30 Jul 2007

4730-01-554-0495
Fluid Passage Bolt

015540495
HEADING 222: RNCC: 3 | RNVC: 2

27 Jul 2007

4730-01-553-7794
Hose Clamp

015537794
ND8906: RNCC: 3 | RNVC: 2

25 Jul 2007

4730-01-553-7567
Pipe To Boss Straight Adapter

015537567
HEADING 189: RNCC: 3 | RNVC: 2

25 Jul 2007

4730-01-553-7217
Hose Clamp

015537217
HEADING 253: RNCC: 3 | RNVC: 2

24 Jul 2007

4730-01-553-6252
Tube Fitting Locknut

015536252
ND8979: RNCC: 3 | RNVC: 2

20 Jul 2007

4730-01-553-5381
Tube Elbow

015535381
DG103/30SOMPCF: RNCC: 3 | RNVC: 2

18 Jul 2007

4730-01-553-4836
Flange To Tube Straight Adapter

015534836
GFS65/38SOMDCF: RNCC: 3 | RNVC: 2

17 Jul 2007

4730-01-553-4835
Tube Elbow

015534835
VEE38SMOMDCF: RNCC: 3 | RNVC: 2

17 Jul 2007

4730-01-553-4767
Tube Coupling Nut

015534767
J514FIG8A-12SS: RNCC: 4 | RNVC: 1

17 Jul 2007

4730-01-553-4332
Tube To Boss Straight Adapter

015534332
GEO16SMOMPCF: RNCC: 3 | RNVC: 2

16 Jul 2007

4730-01-553-4330
Tube To Boss Straight Adapter

015534330
GEO12SMOMDCF: RNCC: 3 | RNVC: 2

16 Jul 2007

4730-01-553-4283
Tube Reducer

015534283
GR16/12SOMDCF: RNCC: 3 | RNVC: 2

16 Jul 2007

4730-01-553-4274
Tube Reducer

015534274
GR38/30SCF: RNCC: 3 | RNVC: 2

16 Jul 2007

4730-01-553-4271
Tube Union

015534271
G08SOMDCF: RNCC: 3 | RNVC: 2

16 Jul 2007

4730-01-553-4272
Tube Union

015534272
G12SOMDCF: RNCC: 3 | RNVC: 2

16 Jul 2007

4730-01-553-3844
Swivel Joint Parts Kit

015533844
FS65009-1212-01: RNCC: 3 | RNVC: 2
FS65009-1212-01: RNCC: 3 | RNVC: 9
BD55021-1212-01: RNCC: 5 | RNVC: 9

13 Jul 2007

4730-01-553-3222
Lubrication Fitting

015533222
SAE J1231: RNCC: 3 | RNVC: 1
6-6 430260BA: RNCC: 3 | RNVC: 2

12 Jul 2007

4730-01-553-1976
Swivel Flange To Tube Elbow

015531976
1002489: RNCC: 3 | RNVC: 2

10 Jul 2007

4730-01-553-1762
Bulkhead Hose Connector

015531762
1001599: RNCC: 3 | RNVC: 2

10 Jul 2007

4730-01-553-1714
Pipe To Tube Elbow

015531714
1002064: RNCC: 3 | RNVC: 2

10 Jul 2007

4730-01-553-1533
Pipe Nipple

015531533
1000617: RNCC: 3 | RNVC: 2
2002381: RNCC: 5 | RNVC: 9

9 Jul 2007

4730-01-553-0004
Exhaust Cooling Line

015530004
41EB92005: RNCC: 3 | RNVC: 2

2 Jul 2007

4730-01-552-9999
Adapter Exhaust Ris

015529999
3008692: RNCC: 3 | RNVC: 2

2 Jul 2007

4730-01-552-9146
Exhaust Flexible Connection

015529146
130C20H20A20125: RNCC: 3 | RNVC: 2

28 Jun 2007

4730-01-552-7885
Hose To Boss Straight Adapter

015527885
55446140: RNCC: 3 | RNVC: 2

25 Jun 2007

4730-01-552-7002
Sfc Ventilation Fit

015527002
9034C27-GP1: RNCC: 3 | RNVC: 1

21 Jun 2007

4730-01-552-5533
Pipe Swivel Joint

015525533
PS1290103-12-12: RNCC: 3 | RNVC: 2

18 Jun 2007

4730-01-552-4117
Swivel Flange To Hose Elbow

015524117
RD-1-1475-0: RNCC: 3 | RNVC: 2

13 Jun 2007

4730-01-552-0544
Tube To Boss Straight Adapter

015520544
6801-LL-08-06: RNCC: 3 | RNVC: 2
6801-LL-8-6: RNCC: 5 | RNVC: 9
6801-LL-08-06: RNCC: 5 | RNVC: 9

5 Jun 2007

4730-01-552-0284
Pipe To Tube Straight Adapter

015520284
0103-6-10: RNCC: 3 | RNVC: 2

4 Jun 2007

4730-01-551-9101
Pipe To Tube Straight Adapter

015519101
8-10-C50X-S: RNCC: 3 | RNVC: 2

31 May 2007

4730-01-551-8268
Suction Strainer

015518268
4010-0110-P1: RNCC: 3 | RNVC: 2

29 May 2007

4730-01-551-7093
Tube Coupling

015517093
LS1058137: RNCC: 3 | RNVC: 2

23 May 2007

4730-01-551-7062
Pipe Locknut

015517062
90636A071: RNCC: 3 | RNVC: 2

23 May 2007

4730-01-551-6246
Pipe Tee

015516246
12-8C5OX-S: RNCC: 3 | RNVC: 2

22 May 2007

4730-01-551-6245
Pipe To Tube Straight Adapter

015516245
12XHX6-S: RNCC: 3 | RNVC: 2

22 May 2007

4730-01-551-6244
Pipe To Tube Straight Adapter

015516244
12-10-V50X-S: RNCC: 3 | RNVC: 2

22 May 2007

4730-01-551-6236
Pipe Tee

015516236
8-R5OX-S: RNCC: 3 | RNVC: 2

22 May 2007

4730-01-551-6230
Tube To Boss Straight Adapter

015516230
8-F50X-S: RNCC: 3 | RNVC: 2

22 May 2007

4730-01-551-5288
Pipe Cap

015515288
641154-400: RNCC: 3 | RNVC: 1
505-8237365ITEMF-12: RNCC: D | RNVC: 9

18 May 2007

4730-01-551-5283
Pipe Elbow

015515283
99111250: RNCC: 3 | RNVC: 1
505-8237365ITEMF-6: RNCC: D | RNVC: 9

18 May 2007

4730-01-551-4414
Tube To Boss Straight Adapter

015514414
60-0004-2: RNCC: 3 | RNVC: 2

17 May 2007

4730-01-551-3538
Tube To Boss Straight Adapter

015513538
SS-400-1-ORBT: RNCC: 3 | RNVC: 2
SS-400-1-ORBT: RNCC: 5 | RNVC: 2

15 May 2007

4730-01-551-3455
Tube To Boss Straight Adapter

15 May 2007

4730-01-551-0823
Tube Nipple

015510823
AS5406J03: RNCC: 3 | RNVC: 2

7 May 2007

4730-01-550-9729
Hose To Boss Straight Adapter

015509729
39182-2-4: RNCC: 3 | RNVC: 2

3 May 2007

4730-01-550-7532
Hose Elbow

015507532
R0062374: RNCC: 3 | RNVC: 2

27 Apr 2007

4730-01-550-7529
Tube To Boss Straight Adapter

015507529
016036: RNCC: 3 | RNVC: 2

27 Apr 2007

4730-01-550-7278
Quick Disconnect Coupling Half

015507278
SKK 20-8S-PK: RNCC: 3 | RNVC: 2

26 Apr 2007

4730-01-550-7183
Springcarrier

015507183
Y3J23229C: RNCC: 3 | RNVC: 2
Y3J23229C: RNCC: 5 | RNVC: 2

26 Apr 2007

4730-01-550-7214
Hose Clamp

015507214
AA-52506-06: RNCC: 2 | RNVC: 2

26 Apr 2007

4730-01-550-6669
Quick Disconnect Coupling Half

015506669
40007-1B38: RNCC: 3 | RNVC: 2

25 Apr 2007

4730-01-550-6068
Pipe To Hose Straight Adapter

015506068
PV411-125: RNCC: 3 | RNVC: 2

24 Apr 2007

4730-01-550-6066
Pipe To Hose Straight Adapter

015506066
PV411-120: RNCC: 3 | RNVC: 2

24 Apr 2007

4730-01-550-6065
Pipe To Hose Straight Adapter

015506065
PV411-110: RNCC: 3 | RNVC: 2

24 Apr 2007

4730-01-550-1657
Pipe Plug

015501657
209-360: RNCC: 3 | RNVC: 2
87362417: RNCC: D | RNVC: 9

11 Apr 2007

4730-01-550-1245
Hose Clamp

015501245
0101031-GF00: RNCC: 3 | RNVC: 2
0101031-GF00-001: RNCC: 5 | RNVC: 2

10 Apr 2007

4730-01-549-6669
Nutzzzzzzzzzzzzzzzz

015496669
M24231/11-031: RNCC: 4 | RNVC: 1
461-7331191 SHT 2 FN 11: RNCC: 5 | RNVC: 1
M24231/11-031: RNCC: 5 | RNVC: 1
461-7331191 SHT 2 FN 11L1: RNCC: 5 | RNVC: 1
M24231/11-031L1: RNCC: 5 | RNVC: 1

28 Mar 2007

4730-01-549-3866
Threaded Tube Fitting Plug

015493866
AS5168J20: RNCC: 3 | RNVC: 2

19 Mar 2007

4730-01-549-3231
Pipe Elbow

015493231
6801-08-06: RNCC: 3 | RNVC: 2
6801-08-06: RNCC: 5 | RNVC: 9
6801-8-6: RNCC: 5 | RNVC: 9

16 Mar 2007

4730-01-549-3226
Pipe Elbow

015493226
6500-8: RNCC: 3 | RNVC: 2

16 Mar 2007

4730-01-549-3225
Pipe Tee

015493225
2601-8-8-6: RNCC: 3 | RNVC: 2

16 Mar 2007

4730-01-548-9561
Quick Disconnect Coupling Half

015489561
64254L: RNCC: 3 | RNVC: 2
64254: RNCC: 5 | RNVC: 9

7 Mar 2007

4730-01-548-7092
Hose Clamp

015487092
07289-00105: RNCC: 3 | RNVC: 9
07289-00105: RNCC: C | RNVC: 1

1 Mar 2007

4730-01-548-6878
Hose Clamp

015486878
J1508TYFST4,5/16HEX-12: RNCC: 3 | RNVC: 2
J1508: RNCC: 5 | RNVC: 1

1 Mar 2007

4730-01-548-4784
Tube Tee

015484784
1841124C1: RNCC: 3 | RNVC: 2

23 Feb 2007

4730-01-548-3762
Flange Elbow

015483762
1841556C1: RNCC: 3 | RNVC: 2

21 Feb 2007

4730-01-548-0261
Machine Thread Plug

015480261
29541018: RNCC: 3 | RNVC: 2

6 Feb 2007

4730-01-547-8584
Pipe To Hose Straight Adapter

015478584
22597: RNCC: 3 | RNVC: 2

1 Feb 2007

4730-01-547-8597
Pipe To Hose Straight Adapter

015478597
22602: RNCC: 3 | RNVC: 2

1 Feb 2007

4730-01-547-8277
Ma Aircraft Fitting

015478277
A78498-6: RNCC: 3 | RNVC: 2

1 Feb 2007

4730-01-547-8272
Ma Aircraft Fitting

015478272
A78498-4: RNCC: 3 | RNVC: 2

1 Feb 2007

4730-01-547-7599
Flange To Hose Elbow

015477599
ASA 1258: RNCC: 3 | RNVC: 2
013472-0106: RNCC: D | RNVC: 9

31 Jan 2007

4730-01-547-7563
Sediment Strainer

015477563
MB39: RNCC: 3 | RNVC: 2
9291-0070: RNCC: 5 | RNVC: 2

31 Jan 2007

4730-01-547-4526
Tube Tee

015474526
8938603740: RNCC: 3 | RNVC: 2

22 Jan 2007

4730-01-547-3949
Ninety Degree Elbow

015473949
1836421C2: RNCC: 3 | RNVC: 2

19 Jan 2007

4730-01-547-3016
Pipe To Boss Elbow

015473016
8938401040: RNCC: 3 | RNVC: 2
006918-0106: RNCC: D | RNVC: 9

17 Jan 2007

4730-01-547-0079
Tube Reducer

015470079
R214D26-73: RNCC: 3 | RNVC: 2

10 Jan 2007

4730-01-547-0004
Tube Coupling

015470004
3588790F91: RNCC: 3 | RNVC: 2

10 Jan 2007

4730-01-547-0000
Tube Coupling

015470000
3571402F92: RNCC: 3 | RNVC: 2

10 Jan 2007

4730-01-546-9914
Tube Elbow

015469914
AS21907: RNCC: 3 | RNVC: 1
AS21907W6: RNCC: 3 | RNVC: 2

10 Jan 2007

4730-01-546-9845
Tube To Boss Straight Adapter

015469845
AS21924: RNCC: 3 | RNVC: 1
AS21924W6: RNCC: 3 | RNVC: 2

10 Jan 2007

4730-01-546-7694
Steam Trap

015467694
N0042-5(0.5IN): RNCC: 3 | RNVC: 2

29 Dec 2006

4730-01-546-5062
Ac Fitting

015465062
26-1313: RNCC: 3 | RNVC: 2

19 Dec 2006

4730-01-546-2415
Pipe Reducer

015462415
48805K86: RNCC: 3 | RNVC: 1

11 Dec 2006

4730-01-546-2366
1-16 Tubing

015462366
SS-T1-S-020-20: RNCC: 3 | RNVC: 1
1801C061-01: RNCC: 5 | RNVC: 1

11 Dec 2006

4730-01-546-1734
Pipe To Tube Elbow

015461734
51205K127: RNCC: 3 | RNVC: 1

7 Dec 2006

4730-01-546-1175
Quick Disconnect Cap

015461175
1400W24A: RNCC: 3 | RNVC: 2

6 Dec 2006

Load More Results