Premium Information is available for this item - Upgrade for $1 a day
4720-01-417-9482
Nonmetallic Hose Assembly
4720014179482 014179482 12365278-1 1C000506-02 1C03750PPP0314A 12365278
A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY, AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING. View more Nonmetallic Hose Assembly
August 2023
9
Marketplace 4720-01-417-9482
Request a Quotation from participating marketplace vendors
Related Documents 4720-01-417-9482 5+ Documents (More...)
Nonmetallic Hose Assembly 4720014179482 4720-01-417-9482 4720014179482 014179482 is a length of
-26 12365278 A length of nonmetallic hose with fittings on one or both ends. -94 12365278 A length of
-37 1C04363EEE0222A 12365278 A length of nonmetallic hose with fittings on one or both ends. -94 12365278
-26 12365278 A length of nonmetallic hose with fittings on one or both ends. -94 12365278 A length of
-37 1C04363EEE0222A 12365278 A length of nonmetallic hose with fittings on one or both ends. -94 12365278
-26 12365278 A length of nonmetallic hose with fittings on one or both ends. -94 12365278 A length of
-37 1C04363EEE0222A 12365278 A length of nonmetallic hose with fittings on one or both ends. -94 12365278
-94 12365278 A length of nonmetallic hose with fittings on one or both ends. -93 12365278 A length of
-93 12365278 A length of nonmetallic hose with fittings on one or both ends.
Restrictions 4720-01-417-9482
4720-01-417-9482 is a Nonmetallic Hose Assembly that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 4720-01-417-9482
- US Army (A920)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZ
- US Marine Corps (MC40)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- MC01
- US Navy (N9BC)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Australia (ZA01)
- Effective Date:
- 1 Feb 2010
Approved Sources 4720-01-417-9482
- Part Number
- Manufacturer
- Status
- 12365278-1
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Source Control
- Source Control
- 1C000506-02
- 01276 - Danfoss Power Solutions Ii, Llc (Active)
- Primary Buy
- Primary Buy
- 12365278-1
- 87373 - Parker-Hannifin Corporation (Active)
- Primary Buy
- Primary Buy
- 1C03750PPP0314A
- 01276 - Danfoss Power Solutions Ii, Llc (Active)
- Original Design
- Original Design
- 12365278-1
- 06085 - Bae Systems Land & Armaments L.P. (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 12365278
- 06085 - Bae Systems Land & Armaments L.P. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 4720-01-417-9482
- Characteristic
- Specifications
- FIIG
- Specifications
- A542A0
- End Connection Design [AKUU]
- Elbow 2Nd End
- End Connection Design [AKUU]
- Straight 1St End
- End Flange Construction [AKUT]
- Solid 1St End
- End Flange Construction [AKUT]
- Solid 2Nd End
- End Item Identification [AGAV]
- 2350-01-390-4683
- Bolt Hole Diameter [AHNX]
- 0.531 Inches Nominal 1St End
- Bolt Hole Diameter [AHNX]
- 0.531 Inches Nominal 2Nd End
- Bolt Hole Quantity [AECS]
- 4 1St End
- Bolt Hole Quantity [AECS]
- 4 2Nd End
- Burst Test Pressure [CQBD]
- 600.0 Pounds Per Square Inch
- Center To Center Distance Between Bolt Holes Along Width [ADUY]
- 1.406 Inches Nominal 1St End
- Center To Center Distance Between Bolt Holes Along Width [ADUY]
- 1.406 Inches Nominal 2Nd End
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 2.750 Inches Nominal 1St End
- Center To Center Distance Between Bolt Holes Along Length [ADUZ]
- 2.750 Inches Nominal 2Nd End
- Connection Style [AHNC]
- Plain W/ Gasket Groove (Sae Flanged Head) 1St End
- Connection Style [AHNC]
- Plain W/ Gasket Groove (Sae Flanged Head) 2Nd End
- Connection Type [AWLS]
- Plain Face Flange 1St End
- Connection Type [AWLS]
- Plain Face Flange 2Nd End
- Cross-Sectional Shape Style [AAGR]
- Round
- Flange Length [AFQN]
- 3.660 Inches Minimum And 3.720 Inches Maximum 1St End
- Flange Length [AFQN]
- 3.660 Inches Minimum And 3.720 Inches Maximum 2Nd End
- Flange Style [CTCJ]
- Double Oval (Sae Split Type Flange) 1St End
- Flange Style [CTCJ]
- Double Oval (Sae Split Type Flange) 2Nd End
- Flange Width [AGFF]
- 3.160 Inches Nominal 1St End
- Flange Width [AGFF]
- 3.160 Inches Nominal 2Nd End
- Flange Thickness [ABKU]
- 0.315 Inches Nominal 1St End
- Flange Thickness [ABKU]
- 0.315 Inches Nominal 2Nd End
- Flow Angle [CRFY]
- 45.0 Degrees 2Nd End
- Hydrostatic Test Pressure [CRDW]
- 300.0 Pounds Per Square Inch
- Maximum Operating Pressure [CQGM]
- 150.0 Pounds Per Square Inch
- Measuring Method And Length [CRXX]
- 31.500 Inches Nominal Overall
- Media For Which Designed [MEDA]
- Fuel/Oil, Hydrocarbon Single Response
- Minimum Inside Bending Radius [ACKH]
- 10.000 Inches
- Outside Diameter [ABKV]
- 2.080 Inches Nominal
- Inside Diameter [AARX]
- 1.500 Inches Nominal
- Inside Surface Condition [CRWL]
- Smooth
- Layer Composition And Location [CQCS]
- 1St Layer Braided Textile Yarn And 2Nd Layer Helix Wire Coil And 3Rd Layer Braided Textile Yarn And Outer Layer Molded Rubber, Synthetic
- Temp Rating [ABJH]
- -40.0 Deg Fahrenheit And 212.0 Deg Fahrenheit Single Response
Weapon Systems (WSDC) 4720-01-417-9482
DLA Procurement Analysis 4720-01-417-9482
- Last Stock Position:
- 13 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 4720-01-417-9482
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 4720-01-417-9482
Freight Information 4720-01-417-9482
4720-01-417-9482 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 051420. A Sub NMFC of X. It has a NMFC Description of CONDUITS,O/T EARTHEN:PIPE FITTINGS. 4720-01-417-9482 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 29090 which rates the freight between FCL and LCL. 4720-01-417-9482 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 736 for ocean manifesting and military sealift. 4720-01-417-9482 is not classified as a special type of cargo when transported by water. 4720-01-417-9482 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 4720-01-417-9482
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- Type I, shelf life
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 4720-01-417-9482 2 Records
Contracting Technical Data File (CTDF) 4720-01-417-9482 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: