4720-00-946-5320

1560-00-439-0160 1560004390160 004390160 BLOCK,ESCAPE HATCH

5450-99-439-0160 5450994390160 994390160

5310-14-439-0160 5310144390160 144390160 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

6145-01-439-0160 6145014390160 014390160 is a single metallic conductor of solid, stranded, or tinsel construction, designed to carry current in an electrical circuit. it may be a bare or insulated, may have metalic covering sheath, shield or and additional jacket. refers to bulk quantities only. for items that are solid or stranded, insulated or uninsulated, and have the chemical composition specified but no conductivity (electrical properties) see wire,(as modified), includes litz wire and insulated/uninsulated armored, and ground wire. excludes braid, wire; fuse wire; resistance wire and magnet wire.