4720-00-595-2968

shielding gasket, electronic; and ring, sealing jar. https//www.nsnlookup.com /fsg-47/fsc-4720/us 4720-00-595-2968
Nonmetallic Hose Assembly 4720005952968 4720-00-595-2968 4720005952968 005952968 is a length of

5330-00-436-7178 5330004367178 004367178 is a deformable material which prevents the passage of matter through the joint formed when two faces are joined. it may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. it may be made to any predetermined dimension and shape. excludes flat disks, items made of felt material and items having joints. for round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

1560-14-436-7178 1560144367178 144367178 is a device of various shapes to be permanently attached to the structure of an aircraft. it is designed to permanently mount and/or support an integral member, or group of members of the airframe in a proper position and bear the stress imposed by the components being supported. it may have mounting provisions, such as slots, holes, and/or attachments to facilitate installation. excludes items which are primarily designed for dampening shock and/or vibration. excludes bracket, angle; bracket, double angle; bracket, shelf; bracket, mounting; bracket (1), structural component, aircraft; and radius block.

5305-01-436-7178 5305014367178 014367178 is a screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. the head is designed to be held or driven with an inserted driver. it is not designed for rotation by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads.

4510-99-436-7178 4510994367178 994367178