4720-27-017-0832

Documents 4720-27-051-8929 2+ Documents ( More... ) https//www.nsnlookup.com /fsg-47/fsc-4720/tr 4720-27-017-0832
Nonmetallic Hose Assembly 4720270170832 (CAGE Code T4187) 2010 4720-27-051-8929 Nonmetallic Hose

4720-14-290-4533 4720142904533 142904533 is a flexible, tubular item of light wall construction. it must have single or multiple layers of nonmetallic material, but may contain metal wire reinforcement, foil type liner, and/or woven or braided cover. it is designed to convey under low pressure gaseous material, such as air and fumes, and light weight solid materials, such as dust, powders, and fibers. for items with couplings, see hose assembly, air duct. for items of sleeve section design rated for high pressure use, see sleeve, seal, coupling. excludes hose, nonmetallic.

4810-01-290-4533 4810012904533 012904533 is a valve having two or more ports with valve stem or pilot needle in a normally open or closed position. it is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. the valve may be equipped with a manual opening or closing device. for items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see valve (1), linear, directional control. it may be inline or cartridge (manifold) design. excludes valve (1), butterfly.

2010 4720-27-051-8929 Nonmetallic Hose Assembly 317F22RNCC: 2 | RNVC: 1 | DAC: 3 3 Dec 2010 4720-27-017-0832

5340-00-290-4533 5340002904533 002904533 is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. when inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. it is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. excludes fastener, spring tension, trim.