4720-14-544-8580

for aviaton, see clip(1), retaining, aviation. https//www.nsnlookup.com /fsg-47/fsc-4720/fr 4720-14-544-8580
Nonmetallic Hose Assembly 4720145448580 4720-14-544-8580 4720145448580 145448580 is a length of

5905-00-501-8816 5905005018816 005018816

3040-01-501-8816 3040015018816 015018816 is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. it is not designed for use in aliging by fitting into corresponding holes of another item. it may be drilled for lubricating holes. for items having an integral gear(s) or worm(s), see gearshaft (as modified). for items not having the above conditions see pin, straight, headless. for items used to transmit motion see shaft, straight. for items having machined ends which constitute steps see axle(1), sholdered. excludes shaft(1), shouldered; and bolt, fluid passage.

6505-14-501-8816 6505145018816 145018816 STAVUDINE, GELULES

3040-37-501-8816 3040375018816 375018816 is an item of various cross-sectional shapes which may be of solid or hollow construction. it is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. it is one of the following: (1) a one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) a one-piece item with both ends processed for terminations, excluding threaded end(s); (3) a two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) a three-piece construction type item consisting of a body and two end attachments. excludes internal combustion engine type piston connecting rods; drag link, steering; link, anchor, brake shoe; tie rod, steering; and turnbuckle. for cylindrical shaped externally threaded items without end attachments, see rod, threaded end and stud (as modified).